drivers/net/wireless/ath/ath10k/wmi.h

   1 /* SPDX-License-Identifier: ISC */
   2 /*
   3  * Copyright (c) 2005-2011 Atheros Communications Inc.
   4  * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
   5  * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
   6  * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
   7  */
   8
   9 #ifndef _WMI_H_
  10 #define _WMI_H_
  11
  12 #include <linux/types.h>
  13 #include <linux/ieee80211.h>
  14
  15 /*
  16  * This file specifies the WMI interface for the Unified Software
  17  * Architecture.
  18  *
  19  * It includes definitions of all the commands and events. Commands are
  20  * messages from the host to the target. Events and Replies are messages
  21  * from the target to the host.
  22  *
  23  * Ownership of correctness in regards to WMI commands belongs to the host
  24  * driver and the target is not required to validate parameters for value,
  25  * proper range, or any other checking.
  26  *
  27  * Guidelines for extending this interface are below.
  28  *
  29  * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
  30  *
  31  * 2. Use ONLY u32 type for defining member variables within WMI
  32  *    command/event structures. Do not use u8, u16, bool or
  33  *    enum types within these structures.
  34  *
  35  * 3. DO NOT define bit fields within structures. Implement bit fields
  36  *    using masks if necessary. Do not use the programming language's bit
  37  *    field definition.
  38  *
  39  * 4. Define macros for encode/decode of u8, u16 fields within
  40  *    the u32 variables. Use these macros for set/get of these fields.
  41  *    Try to use this to optimize the structure without bloating it with
  42  *    u32 variables for every lower sized field.
  43  *
  44  * 5. Do not use PACK/UNPACK attributes for the structures as each member
  45  *    variable is already 4-byte aligned by virtue of being a u32
  46  *    type.
  47  *
  48  * 6. Comment each parameter part of the WMI command/event structure by
  49  *    using the 2 stars at the beginning of C comment instead of one star to
  50  *    enable HTML document generation using Doxygen.
  51  *
  52  */
  53
  54 /* Control Path */
  55 struct wmi_cmd_hdr {
  56         __le32 cmd_id;
  57 } __packed;
  58
  59 #define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
  60 #define WMI_CMD_HDR_CMD_ID_LSB    0
  61 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
  62 #define WMI_CMD_HDR_PLT_PRIV_LSB  24
  63
  64 #define HTC_PROTOCOL_VERSION    0x0002
  65 #define WMI_PROTOCOL_VERSION    0x0002
  66
  67 /*
  68  * There is no signed version of __le32, so for a temporary solution come
  69  * up with our own version. The idea is from fs/ntfs/endian.h.
  70  *
  71  * Use a_ prefix so that it doesn't conflict if we get proper support to
  72  * linux/types.h.
  73  */
  74 typedef __s32 __bitwise a_sle32;
  75
  76 static inline a_sle32 a_cpu_to_sle32(s32 val)
  77 {
  78         return (__force a_sle32)cpu_to_le32(val);
  79 }
  80
  81 static inline s32 a_sle32_to_cpu(a_sle32 val)
  82 {
  83         return le32_to_cpu((__force __le32)val);
  84 }
  85
  86 enum wmi_service {
  87         WMI_SERVICE_BEACON_OFFLOAD = 0,
  88         WMI_SERVICE_SCAN_OFFLOAD,
  89         WMI_SERVICE_ROAM_OFFLOAD,
  90         WMI_SERVICE_BCN_MISS_OFFLOAD,
  91         WMI_SERVICE_STA_PWRSAVE,
  92         WMI_SERVICE_STA_ADVANCED_PWRSAVE,
  93         WMI_SERVICE_AP_UAPSD,
  94         WMI_SERVICE_AP_DFS,
  95         WMI_SERVICE_11AC,
  96         WMI_SERVICE_BLOCKACK,
  97         WMI_SERVICE_PHYERR,
  98         WMI_SERVICE_BCN_FILTER,
  99         WMI_SERVICE_RTT,
 100         WMI_SERVICE_RATECTRL,
 101         WMI_SERVICE_WOW,
 102         WMI_SERVICE_RATECTRL_CACHE,
 103         WMI_SERVICE_IRAM_TIDS,
 104         WMI_SERVICE_ARPNS_OFFLOAD,
 105         WMI_SERVICE_NLO,
 106         WMI_SERVICE_GTK_OFFLOAD,
 107         WMI_SERVICE_SCAN_SCH,
 108         WMI_SERVICE_CSA_OFFLOAD,
 109         WMI_SERVICE_CHATTER,
 110         WMI_SERVICE_COEX_FREQAVOID,
 111         WMI_SERVICE_PACKET_POWER_SAVE,
 112         WMI_SERVICE_FORCE_FW_HANG,
 113         WMI_SERVICE_GPIO,
 114         WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 115         WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 116         WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 117         WMI_SERVICE_STA_KEEP_ALIVE,
 118         WMI_SERVICE_TX_ENCAP,
 119         WMI_SERVICE_BURST,
 120         WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 121         WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 122         WMI_SERVICE_ROAM_SCAN_OFFLOAD,
 123         WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 124         WMI_SERVICE_EARLY_RX,
 125         WMI_SERVICE_STA_SMPS,
 126         WMI_SERVICE_FWTEST,
 127         WMI_SERVICE_STA_WMMAC,
 128         WMI_SERVICE_TDLS,
 129         WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
 130         WMI_SERVICE_ADAPTIVE_OCS,
 131         WMI_SERVICE_BA_SSN_SUPPORT,
 132         WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
 133         WMI_SERVICE_WLAN_HB,
 134         WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
 135         WMI_SERVICE_BATCH_SCAN,
 136         WMI_SERVICE_QPOWER,
 137         WMI_SERVICE_PLMREQ,
 138         WMI_SERVICE_THERMAL_MGMT,
 139         WMI_SERVICE_RMC,
 140         WMI_SERVICE_MHF_OFFLOAD,
 141         WMI_SERVICE_COEX_SAR,
 142         WMI_SERVICE_BCN_TXRATE_OVERRIDE,
 143         WMI_SERVICE_NAN,
 144         WMI_SERVICE_L1SS_STAT,
 145         WMI_SERVICE_ESTIMATE_LINKSPEED,
 146         WMI_SERVICE_OBSS_SCAN,
 147         WMI_SERVICE_TDLS_OFFCHAN,
 148         WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
 149         WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
 150         WMI_SERVICE_IBSS_PWRSAVE,
 151         WMI_SERVICE_LPASS,
 152         WMI_SERVICE_EXTSCAN,
 153         WMI_SERVICE_D0WOW,
 154         WMI_SERVICE_HSOFFLOAD,
 155         WMI_SERVICE_ROAM_HO_OFFLOAD,
 156         WMI_SERVICE_RX_FULL_REORDER,
 157         WMI_SERVICE_DHCP_OFFLOAD,
 158         WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
 159         WMI_SERVICE_MDNS_OFFLOAD,
 160         WMI_SERVICE_SAP_AUTH_OFFLOAD,
 161         WMI_SERVICE_ATF,
 162         WMI_SERVICE_COEX_GPIO,
 163         WMI_SERVICE_ENHANCED_PROXY_STA,
 164         WMI_SERVICE_TT,
 165         WMI_SERVICE_PEER_CACHING,
 166         WMI_SERVICE_AUX_SPECTRAL_INTF,
 167         WMI_SERVICE_AUX_CHAN_LOAD_INTF,
 168         WMI_SERVICE_BSS_CHANNEL_INFO_64,
 169         WMI_SERVICE_EXT_RES_CFG_SUPPORT,
 170         WMI_SERVICE_MESH_11S,
 171         WMI_SERVICE_MESH_NON_11S,
 172         WMI_SERVICE_PEER_STATS,
 173         WMI_SERVICE_RESTRT_CHNL_SUPPORT,
 174         WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 175         WMI_SERVICE_TX_MODE_PUSH_ONLY,
 176         WMI_SERVICE_TX_MODE_PUSH_PULL,
 177         WMI_SERVICE_TX_MODE_DYNAMIC,
 178         WMI_SERVICE_VDEV_RX_FILTER,
 179         WMI_SERVICE_BTCOEX,
 180         WMI_SERVICE_CHECK_CAL_VERSION,
 181         WMI_SERVICE_DBGLOG_WARN2,
 182         WMI_SERVICE_BTCOEX_DUTY_CYCLE,
 183         WMI_SERVICE_4_WIRE_COEX_SUPPORT,
 184         WMI_SERVICE_EXTENDED_NSS_SUPPORT,
 185         WMI_SERVICE_PROG_GPIO_BAND_SELECT,
 186         WMI_SERVICE_SMART_LOGGING_SUPPORT,
 187         WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 188         WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 189         WMI_SERVICE_MGMT_TX_WMI,
 190         WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
 191         WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 192         WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
 193         WMI_SERVICE_TPC_STATS_FINAL,
 194         WMI_SERVICE_RESET_CHIP,
 195         WMI_SERVICE_SPOOF_MAC_SUPPORT,
 196         WMI_SERVICE_TX_DATA_ACK_RSSI,
 197         WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 198         WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 199         WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 200         WMI_SERVICE_THERM_THROT,
 201         WMI_SERVICE_RTT_RESPONDER_ROLE,
 202         WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
 203         WMI_SERVICE_REPORT_AIRTIME,
 204         WMI_SERVICE_SYNC_DELETE_CMDS,
 205         WMI_SERVICE_TX_PWR_PER_PEER,
 206         WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
 207         WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 208         WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 209
 210         /* Remember to add the new value to wmi_service_name()! */
 211
 212         /* keep last */
 213         WMI_SERVICE_MAX,
 214 };
 215
 216 enum wmi_10x_service {
 217         WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
 218         WMI_10X_SERVICE_SCAN_OFFLOAD,
 219         WMI_10X_SERVICE_ROAM_OFFLOAD,
 220         WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 221         WMI_10X_SERVICE_STA_PWRSAVE,
 222         WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 223         WMI_10X_SERVICE_AP_UAPSD,
 224         WMI_10X_SERVICE_AP_DFS,
 225         WMI_10X_SERVICE_11AC,
 226         WMI_10X_SERVICE_BLOCKACK,
 227         WMI_10X_SERVICE_PHYERR,
 228         WMI_10X_SERVICE_BCN_FILTER,
 229         WMI_10X_SERVICE_RTT,
 230         WMI_10X_SERVICE_RATECTRL,
 231         WMI_10X_SERVICE_WOW,
 232         WMI_10X_SERVICE_RATECTRL_CACHE,
 233         WMI_10X_SERVICE_IRAM_TIDS,
 234         WMI_10X_SERVICE_BURST,
 235
 236         /* introduced in 10.2 */
 237         WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 238         WMI_10X_SERVICE_FORCE_FW_HANG,
 239         WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 240         WMI_10X_SERVICE_ATF,
 241         WMI_10X_SERVICE_COEX_GPIO,
 242         WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 243         WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 244         WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 245         WMI_10X_SERVICE_MESH,
 246         WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 247         WMI_10X_SERVICE_PEER_STATS,
 248         WMI_10X_SERVICE_RESET_CHIP,
 249         WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 250         WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
 251         WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
 252         WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 253 };
 254
 255 enum wmi_main_service {
 256         WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
 257         WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 258         WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 259         WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 260         WMI_MAIN_SERVICE_STA_PWRSAVE,
 261         WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 262         WMI_MAIN_SERVICE_AP_UAPSD,
 263         WMI_MAIN_SERVICE_AP_DFS,
 264         WMI_MAIN_SERVICE_11AC,
 265         WMI_MAIN_SERVICE_BLOCKACK,
 266         WMI_MAIN_SERVICE_PHYERR,
 267         WMI_MAIN_SERVICE_BCN_FILTER,
 268         WMI_MAIN_SERVICE_RTT,
 269         WMI_MAIN_SERVICE_RATECTRL,
 270         WMI_MAIN_SERVICE_WOW,
 271         WMI_MAIN_SERVICE_RATECTRL_CACHE,
 272         WMI_MAIN_SERVICE_IRAM_TIDS,
 273         WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 274         WMI_MAIN_SERVICE_NLO,
 275         WMI_MAIN_SERVICE_GTK_OFFLOAD,
 276         WMI_MAIN_SERVICE_SCAN_SCH,
 277         WMI_MAIN_SERVICE_CSA_OFFLOAD,
 278         WMI_MAIN_SERVICE_CHATTER,
 279         WMI_MAIN_SERVICE_COEX_FREQAVOID,
 280         WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 281         WMI_MAIN_SERVICE_FORCE_FW_HANG,
 282         WMI_MAIN_SERVICE_GPIO,
 283         WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 284         WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 285         WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 286         WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 287         WMI_MAIN_SERVICE_TX_ENCAP,
 288 };
 289
 290 enum wmi_10_4_service {
 291         WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
 292         WMI_10_4_SERVICE_SCAN_OFFLOAD,
 293         WMI_10_4_SERVICE_ROAM_OFFLOAD,
 294         WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 295         WMI_10_4_SERVICE_STA_PWRSAVE,
 296         WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 297         WMI_10_4_SERVICE_AP_UAPSD,
 298         WMI_10_4_SERVICE_AP_DFS,
 299         WMI_10_4_SERVICE_11AC,
 300         WMI_10_4_SERVICE_BLOCKACK,
 301         WMI_10_4_SERVICE_PHYERR,
 302         WMI_10_4_SERVICE_BCN_FILTER,
 303         WMI_10_4_SERVICE_RTT,
 304         WMI_10_4_SERVICE_RATECTRL,
 305         WMI_10_4_SERVICE_WOW,
 306         WMI_10_4_SERVICE_RATECTRL_CACHE,
 307         WMI_10_4_SERVICE_IRAM_TIDS,
 308         WMI_10_4_SERVICE_BURST,
 309         WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 310         WMI_10_4_SERVICE_GTK_OFFLOAD,
 311         WMI_10_4_SERVICE_SCAN_SCH,
 312         WMI_10_4_SERVICE_CSA_OFFLOAD,
 313         WMI_10_4_SERVICE_CHATTER,
 314         WMI_10_4_SERVICE_COEX_FREQAVOID,
 315         WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 316         WMI_10_4_SERVICE_FORCE_FW_HANG,
 317         WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 318         WMI_10_4_SERVICE_GPIO,
 319         WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 320         WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 321         WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 322         WMI_10_4_SERVICE_TX_ENCAP,
 323         WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 324         WMI_10_4_SERVICE_EARLY_RX,
 325         WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 326         WMI_10_4_SERVICE_TT,
 327         WMI_10_4_SERVICE_ATF,
 328         WMI_10_4_SERVICE_PEER_CACHING,
 329         WMI_10_4_SERVICE_COEX_GPIO,
 330         WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 331         WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 332         WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 333         WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 334         WMI_10_4_SERVICE_MESH_NON_11S,
 335         WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 336         WMI_10_4_SERVICE_PEER_STATS,
 337         WMI_10_4_SERVICE_MESH_11S,
 338         WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 339         WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 340         WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 341         WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 342         WMI_10_4_SERVICE_VDEV_RX_FILTER,
 343         WMI_10_4_SERVICE_BTCOEX,
 344         WMI_10_4_SERVICE_CHECK_CAL_VERSION,
 345         WMI_10_4_SERVICE_DBGLOG_WARN2,
 346         WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
 347         WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
 348         WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
 349         WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
 350         WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
 351         WMI_10_4_SERVICE_TDLS,
 352         WMI_10_4_SERVICE_TDLS_OFFCHAN,
 353         WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
 354         WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
 355         WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 356         WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 357         WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
 358         WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 359         WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
 360         WMI_10_4_SERVICE_TPC_STATS_FINAL,
 361         WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
 362         WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 363         WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
 364         WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
 365         WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 366         WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
 367         WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 368         WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
 369         WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
 370         WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 371         WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
 372         WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
 373         WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
 374         WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 375         WMI_10_4_SERVICE_REPORT_AIRTIME,
 376         WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 377         WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
 378         WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
 379         WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
 380         WMI_10_4_SERVICE_QINQ_SUPPORT,
 381         WMI_10_4_SERVICE_RESET_CHIP,
 382 };
 383
 384 static inline char *wmi_service_name(enum wmi_service service_id)
 385 {
 386 #define SVCSTR(x) case x: return #x
 387
 388         switch (service_id) {
 389         SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
 390         SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
 391         SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
 392         SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
 393         SVCSTR(WMI_SERVICE_STA_PWRSAVE);
 394         SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
 395         SVCSTR(WMI_SERVICE_AP_UAPSD);
 396         SVCSTR(WMI_SERVICE_AP_DFS);
 397         SVCSTR(WMI_SERVICE_11AC);
 398         SVCSTR(WMI_SERVICE_BLOCKACK);
 399         SVCSTR(WMI_SERVICE_PHYERR);
 400         SVCSTR(WMI_SERVICE_BCN_FILTER);
 401         SVCSTR(WMI_SERVICE_RTT);
 402         SVCSTR(WMI_SERVICE_RATECTRL);
 403         SVCSTR(WMI_SERVICE_WOW);
 404         SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
 405         SVCSTR(WMI_SERVICE_IRAM_TIDS);
 406         SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
 407         SVCSTR(WMI_SERVICE_NLO);
 408         SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
 409         SVCSTR(WMI_SERVICE_SCAN_SCH);
 410         SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
 411         SVCSTR(WMI_SERVICE_CHATTER);
 412         SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
 413         SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
 414         SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
 415         SVCSTR(WMI_SERVICE_GPIO);
 416         SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
 417         SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
 418         SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
 419         SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
 420         SVCSTR(WMI_SERVICE_TX_ENCAP);
 421         SVCSTR(WMI_SERVICE_BURST);
 422         SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
 423         SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
 424         SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
 425         SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
 426         SVCSTR(WMI_SERVICE_EARLY_RX);
 427         SVCSTR(WMI_SERVICE_STA_SMPS);
 428         SVCSTR(WMI_SERVICE_FWTEST);
 429         SVCSTR(WMI_SERVICE_STA_WMMAC);
 430         SVCSTR(WMI_SERVICE_TDLS);
 431         SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
 432         SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
 433         SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
 434         SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
 435         SVCSTR(WMI_SERVICE_WLAN_HB);
 436         SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
 437         SVCSTR(WMI_SERVICE_BATCH_SCAN);
 438         SVCSTR(WMI_SERVICE_QPOWER);
 439         SVCSTR(WMI_SERVICE_PLMREQ);
 440         SVCSTR(WMI_SERVICE_THERMAL_MGMT);
 441         SVCSTR(WMI_SERVICE_RMC);
 442         SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
 443         SVCSTR(WMI_SERVICE_COEX_SAR);
 444         SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
 445         SVCSTR(WMI_SERVICE_NAN);
 446         SVCSTR(WMI_SERVICE_L1SS_STAT);
 447         SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
 448         SVCSTR(WMI_SERVICE_OBSS_SCAN);
 449         SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
 450         SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
 451         SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
 452         SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
 453         SVCSTR(WMI_SERVICE_LPASS);
 454         SVCSTR(WMI_SERVICE_EXTSCAN);
 455         SVCSTR(WMI_SERVICE_D0WOW);
 456         SVCSTR(WMI_SERVICE_HSOFFLOAD);
 457         SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
 458         SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
 459         SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
 460         SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
 461         SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
 462         SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
 463         SVCSTR(WMI_SERVICE_ATF);
 464         SVCSTR(WMI_SERVICE_COEX_GPIO);
 465         SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
 466         SVCSTR(WMI_SERVICE_TT);
 467         SVCSTR(WMI_SERVICE_PEER_CACHING);
 468         SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
 469         SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
 470         SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
 471         SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
 472         SVCSTR(WMI_SERVICE_MESH_11S);
 473         SVCSTR(WMI_SERVICE_MESH_NON_11S);
 474         SVCSTR(WMI_SERVICE_PEER_STATS);
 475         SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
 476         SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
 477         SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
 478         SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
 479         SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
 480         SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
 481         SVCSTR(WMI_SERVICE_BTCOEX);
 482         SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
 483         SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
 484         SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
 485         SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
 486         SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
 487         SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
 488         SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
 489         SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
 490         SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
 491         SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
 492         SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
 493         SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
 494         SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
 495         SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
 496         SVCSTR(WMI_SERVICE_RESET_CHIP);
 497         SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
 498         SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
 499         SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
 500         SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
 501         SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
 502         SVCSTR(WMI_SERVICE_THERM_THROT);
 503         SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
 504         SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
 505         SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
 506         SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
 507         SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
 508         SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
 509         SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
 510         SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
 511
 512         case WMI_SERVICE_MAX:
 513                 return NULL;
 514         }
 515
 516 #undef SVCSTR
 517
 518         return NULL;
 519 }
 520
 521 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 522         ((svc_id) < (len) && \
 523          __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
 524          BIT((svc_id) % (sizeof(u32))))
 525
 526 /* This extension is required to accommodate new services, current limit
 527  * for wmi_services is 64 as target is using only 4-bits of each 32-bit
 528  * wmi_service word. Extending this to make use of remaining unused bits
 529  * for new services.
 530  */
 531 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 532         ((svc_id) >= (len) && \
 533         __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
 534         BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
 535
 536 #define SVCMAP(x, y, len) \
 537         do { \
 538                 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
 539                     (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
 540                         __set_bit(y, out); \
 541         } while (0)
 542
 543 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
 544                                    size_t len)
 545 {
 546         SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
 547                WMI_SERVICE_BEACON_OFFLOAD, len);
 548         SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
 549                WMI_SERVICE_SCAN_OFFLOAD, len);
 550         SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
 551                WMI_SERVICE_ROAM_OFFLOAD, len);
 552         SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 553                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 554         SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
 555                WMI_SERVICE_STA_PWRSAVE, len);
 556         SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 557                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 558         SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
 559                WMI_SERVICE_AP_UAPSD, len);
 560         SVCMAP(WMI_10X_SERVICE_AP_DFS,
 561                WMI_SERVICE_AP_DFS, len);
 562         SVCMAP(WMI_10X_SERVICE_11AC,
 563                WMI_SERVICE_11AC, len);
 564         SVCMAP(WMI_10X_SERVICE_BLOCKACK,
 565                WMI_SERVICE_BLOCKACK, len);
 566         SVCMAP(WMI_10X_SERVICE_PHYERR,
 567                WMI_SERVICE_PHYERR, len);
 568         SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
 569                WMI_SERVICE_BCN_FILTER, len);
 570         SVCMAP(WMI_10X_SERVICE_RTT,
 571                WMI_SERVICE_RTT, len);
 572         SVCMAP(WMI_10X_SERVICE_RATECTRL,
 573                WMI_SERVICE_RATECTRL, len);
 574         SVCMAP(WMI_10X_SERVICE_WOW,
 575                WMI_SERVICE_WOW, len);
 576         SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
 577                WMI_SERVICE_RATECTRL_CACHE, len);
 578         SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
 579                WMI_SERVICE_IRAM_TIDS, len);
 580         SVCMAP(WMI_10X_SERVICE_BURST,
 581                WMI_SERVICE_BURST, len);
 582         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 583                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 584         SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
 585                WMI_SERVICE_FORCE_FW_HANG, len);
 586         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 587                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 588         SVCMAP(WMI_10X_SERVICE_ATF,
 589                WMI_SERVICE_ATF, len);
 590         SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
 591                WMI_SERVICE_COEX_GPIO, len);
 592         SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 593                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 594         SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 595                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 596         SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 597                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 598         SVCMAP(WMI_10X_SERVICE_MESH,
 599                WMI_SERVICE_MESH_11S, len);
 600         SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 601                WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 602         SVCMAP(WMI_10X_SERVICE_PEER_STATS,
 603                WMI_SERVICE_PEER_STATS, len);
 604         SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
 605                WMI_SERVICE_RESET_CHIP, len);
 606         SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 607                WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
 608         SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 609                WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
 610         SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
 611                WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
 612 }
 613
 614 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
 615                                     size_t len)
 616 {
 617         SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
 618                WMI_SERVICE_BEACON_OFFLOAD, len);
 619         SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 620                WMI_SERVICE_SCAN_OFFLOAD, len);
 621         SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 622                WMI_SERVICE_ROAM_OFFLOAD, len);
 623         SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 624                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 625         SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
 626                WMI_SERVICE_STA_PWRSAVE, len);
 627         SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 628                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 629         SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
 630                WMI_SERVICE_AP_UAPSD, len);
 631         SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
 632                WMI_SERVICE_AP_DFS, len);
 633         SVCMAP(WMI_MAIN_SERVICE_11AC,
 634                WMI_SERVICE_11AC, len);
 635         SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
 636                WMI_SERVICE_BLOCKACK, len);
 637         SVCMAP(WMI_MAIN_SERVICE_PHYERR,
 638                WMI_SERVICE_PHYERR, len);
 639         SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
 640                WMI_SERVICE_BCN_FILTER, len);
 641         SVCMAP(WMI_MAIN_SERVICE_RTT,
 642                WMI_SERVICE_RTT, len);
 643         SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
 644                WMI_SERVICE_RATECTRL, len);
 645         SVCMAP(WMI_MAIN_SERVICE_WOW,
 646                WMI_SERVICE_WOW, len);
 647         SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
 648                WMI_SERVICE_RATECTRL_CACHE, len);
 649         SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
 650                WMI_SERVICE_IRAM_TIDS, len);
 651         SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 652                WMI_SERVICE_ARPNS_OFFLOAD, len);
 653         SVCMAP(WMI_MAIN_SERVICE_NLO,
 654                WMI_SERVICE_NLO, len);
 655         SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
 656                WMI_SERVICE_GTK_OFFLOAD, len);
 657         SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
 658                WMI_SERVICE_SCAN_SCH, len);
 659         SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
 660                WMI_SERVICE_CSA_OFFLOAD, len);
 661         SVCMAP(WMI_MAIN_SERVICE_CHATTER,
 662                WMI_SERVICE_CHATTER, len);
 663         SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
 664                WMI_SERVICE_COEX_FREQAVOID, len);
 665         SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 666                WMI_SERVICE_PACKET_POWER_SAVE, len);
 667         SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
 668                WMI_SERVICE_FORCE_FW_HANG, len);
 669         SVCMAP(WMI_MAIN_SERVICE_GPIO,
 670                WMI_SERVICE_GPIO, len);
 671         SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 672                WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
 673         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 674                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 675         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 676                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 677         SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 678                WMI_SERVICE_STA_KEEP_ALIVE, len);
 679         SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
 680                WMI_SERVICE_TX_ENCAP, len);
 681 }
 682
 683 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 684                                     size_t len)
 685 {
 686         SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
 687                WMI_SERVICE_BEACON_OFFLOAD, len);
 688         SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
 689                WMI_SERVICE_SCAN_OFFLOAD, len);
 690         SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
 691                WMI_SERVICE_ROAM_OFFLOAD, len);
 692         SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 693                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 694         SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
 695                WMI_SERVICE_STA_PWRSAVE, len);
 696         SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 697                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 698         SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
 699                WMI_SERVICE_AP_UAPSD, len);
 700         SVCMAP(WMI_10_4_SERVICE_AP_DFS,
 701                WMI_SERVICE_AP_DFS, len);
 702         SVCMAP(WMI_10_4_SERVICE_11AC,
 703                WMI_SERVICE_11AC, len);
 704         SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
 705                WMI_SERVICE_BLOCKACK, len);
 706         SVCMAP(WMI_10_4_SERVICE_PHYERR,
 707                WMI_SERVICE_PHYERR, len);
 708         SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
 709                WMI_SERVICE_BCN_FILTER, len);
 710         SVCMAP(WMI_10_4_SERVICE_RTT,
 711                WMI_SERVICE_RTT, len);
 712         SVCMAP(WMI_10_4_SERVICE_RATECTRL,
 713                WMI_SERVICE_RATECTRL, len);
 714         SVCMAP(WMI_10_4_SERVICE_WOW,
 715                WMI_SERVICE_WOW, len);
 716         SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
 717                WMI_SERVICE_RATECTRL_CACHE, len);
 718         SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
 719                WMI_SERVICE_IRAM_TIDS, len);
 720         SVCMAP(WMI_10_4_SERVICE_BURST,
 721                WMI_SERVICE_BURST, len);
 722         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 723                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 724         SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
 725                WMI_SERVICE_GTK_OFFLOAD, len);
 726         SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
 727                WMI_SERVICE_SCAN_SCH, len);
 728         SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
 729                WMI_SERVICE_CSA_OFFLOAD, len);
 730         SVCMAP(WMI_10_4_SERVICE_CHATTER,
 731                WMI_SERVICE_CHATTER, len);
 732         SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
 733                WMI_SERVICE_COEX_FREQAVOID, len);
 734         SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 735                WMI_SERVICE_PACKET_POWER_SAVE, len);
 736         SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
 737                WMI_SERVICE_FORCE_FW_HANG, len);
 738         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 739                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 740         SVCMAP(WMI_10_4_SERVICE_GPIO,
 741                WMI_SERVICE_GPIO, len);
 742         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 743                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 744         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 745                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 746         SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 747                WMI_SERVICE_STA_KEEP_ALIVE, len);
 748         SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
 749                WMI_SERVICE_TX_ENCAP, len);
 750         SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 751                WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
 752         SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
 753                WMI_SERVICE_EARLY_RX, len);
 754         SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 755                WMI_SERVICE_ENHANCED_PROXY_STA, len);
 756         SVCMAP(WMI_10_4_SERVICE_TT,
 757                WMI_SERVICE_TT, len);
 758         SVCMAP(WMI_10_4_SERVICE_ATF,
 759                WMI_SERVICE_ATF, len);
 760         SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
 761                WMI_SERVICE_PEER_CACHING, len);
 762         SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
 763                WMI_SERVICE_COEX_GPIO, len);
 764         SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 765                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 766         SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 767                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 768         SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 769                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 770         SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 771                WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 772         SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
 773                WMI_SERVICE_MESH_NON_11S, len);
 774         SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 775                WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
 776         SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
 777                WMI_SERVICE_PEER_STATS, len);
 778         SVCMAP(WMI_10_4_SERVICE_MESH_11S,
 779                WMI_SERVICE_MESH_11S, len);
 780         SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 781                WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
 782         SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 783                WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
 784         SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 785                WMI_SERVICE_TX_MODE_PUSH_PULL, len);
 786         SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 787                WMI_SERVICE_TX_MODE_DYNAMIC, len);
 788         SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
 789                WMI_SERVICE_VDEV_RX_FILTER, len);
 790         SVCMAP(WMI_10_4_SERVICE_BTCOEX,
 791                WMI_SERVICE_BTCOEX, len);
 792         SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
 793                WMI_SERVICE_CHECK_CAL_VERSION, len);
 794         SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
 795                WMI_SERVICE_DBGLOG_WARN2, len);
 796         SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
 797                WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
 798         SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
 799                WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
 800         SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
 801                WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
 802         SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
 803                WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
 804         SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
 805                WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
 806         SVCMAP(WMI_10_4_SERVICE_TDLS,
 807                WMI_SERVICE_TDLS, len);
 808         SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
 809                WMI_SERVICE_TDLS_OFFCHAN, len);
 810         SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
 811                WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
 812         SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
 813                WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
 814         SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 815                WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
 816         SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 817                WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
 818         SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
 819                WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
 820         SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 821                WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
 822         SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
 823                WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
 824         SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
 825                WMI_SERVICE_TPC_STATS_FINAL, len);
 826         SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 827                WMI_SERVICE_TX_DATA_ACK_RSSI, len);
 828         SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 829                WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
 830         SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 831                WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
 832         SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
 833                WMI_SERVICE_RTT_RESPONDER_ROLE, len);
 834         SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
 835                WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
 836         SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
 837                WMI_SERVICE_REPORT_AIRTIME, len);
 838         SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 839                WMI_SERVICE_TX_PWR_PER_PEER, len);
 840         SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
 841                WMI_SERVICE_RESET_CHIP, len);
 842         SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 843                WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 844         SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 845                WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 846 }
 847
 848 #undef SVCMAP
 849
 850 /* 2 word representation of MAC addr */
 851 struct wmi_mac_addr {
 852         union {
 853                 u8 addr[6];
 854                 struct {
 855                         u32 word0;
 856                         u32 word1;
 857                 } __packed;
 858         } __packed;
 859 } __packed;
 860
 861 struct wmi_cmd_map {
 862         u32 init_cmdid;
 863         u32 start_scan_cmdid;
 864         u32 stop_scan_cmdid;
 865         u32 scan_chan_list_cmdid;
 866         u32 scan_sch_prio_tbl_cmdid;
 867         u32 scan_prob_req_oui_cmdid;
 868         u32 pdev_set_regdomain_cmdid;
 869         u32 pdev_set_channel_cmdid;
 870         u32 pdev_set_param_cmdid;
 871         u32 pdev_pktlog_enable_cmdid;
 872         u32 pdev_pktlog_disable_cmdid;
 873         u32 pdev_set_wmm_params_cmdid;
 874         u32 pdev_set_ht_cap_ie_cmdid;
 875         u32 pdev_set_vht_cap_ie_cmdid;
 876         u32 pdev_set_dscp_tid_map_cmdid;
 877         u32 pdev_set_quiet_mode_cmdid;
 878         u32 pdev_green_ap_ps_enable_cmdid;
 879         u32 pdev_get_tpc_config_cmdid;
 880         u32 pdev_set_base_macaddr_cmdid;
 881         u32 vdev_create_cmdid;
 882         u32 vdev_delete_cmdid;
 883         u32 vdev_start_request_cmdid;
 884         u32 vdev_restart_request_cmdid;
 885         u32 vdev_up_cmdid;
 886         u32 vdev_stop_cmdid;
 887         u32 vdev_down_cmdid;
 888         u32 vdev_set_param_cmdid;
 889         u32 vdev_install_key_cmdid;
 890         u32 peer_create_cmdid;
 891         u32 peer_delete_cmdid;
 892         u32 peer_flush_tids_cmdid;
 893         u32 peer_set_param_cmdid;
 894         u32 peer_assoc_cmdid;
 895         u32 peer_add_wds_entry_cmdid;
 896         u32 peer_remove_wds_entry_cmdid;
 897         u32 peer_mcast_group_cmdid;
 898         u32 bcn_tx_cmdid;
 899         u32 pdev_send_bcn_cmdid;
 900         u32 bcn_tmpl_cmdid;
 901         u32 bcn_filter_rx_cmdid;
 902         u32 prb_req_filter_rx_cmdid;
 903         u32 mgmt_tx_cmdid;
 904         u32 mgmt_tx_send_cmdid;
 905         u32 prb_tmpl_cmdid;
 906         u32 addba_clear_resp_cmdid;
 907         u32 addba_send_cmdid;
 908         u32 addba_status_cmdid;
 909         u32 delba_send_cmdid;
 910         u32 addba_set_resp_cmdid;
 911         u32 send_singleamsdu_cmdid;
 912         u32 sta_powersave_mode_cmdid;
 913         u32 sta_powersave_param_cmdid;
 914         u32 sta_mimo_ps_mode_cmdid;
 915         u32 pdev_dfs_enable_cmdid;
 916         u32 pdev_dfs_disable_cmdid;
 917         u32 roam_scan_mode;
 918         u32 roam_scan_rssi_threshold;
 919         u32 roam_scan_period;
 920         u32 roam_scan_rssi_change_threshold;
 921         u32 roam_ap_profile;
 922         u32 ofl_scan_add_ap_profile;
 923         u32 ofl_scan_remove_ap_profile;
 924         u32 ofl_scan_period;
 925         u32 p2p_dev_set_device_info;
 926         u32 p2p_dev_set_discoverability;
 927         u32 p2p_go_set_beacon_ie;
 928         u32 p2p_go_set_probe_resp_ie;
 929         u32 p2p_set_vendor_ie_data_cmdid;
 930         u32 ap_ps_peer_param_cmdid;
 931         u32 ap_ps_peer_uapsd_coex_cmdid;
 932         u32 peer_rate_retry_sched_cmdid;
 933         u32 wlan_profile_trigger_cmdid;
 934         u32 wlan_profile_set_hist_intvl_cmdid;
 935         u32 wlan_profile_get_profile_data_cmdid;
 936         u32 wlan_profile_enable_profile_id_cmdid;
 937         u32 wlan_profile_list_profile_id_cmdid;
 938         u32 pdev_suspend_cmdid;
 939         u32 pdev_resume_cmdid;
 940         u32 add_bcn_filter_cmdid;
 941         u32 rmv_bcn_filter_cmdid;
 942         u32 wow_add_wake_pattern_cmdid;
 943         u32 wow_del_wake_pattern_cmdid;
 944         u32 wow_enable_disable_wake_event_cmdid;
 945         u32 wow_enable_cmdid;
 946         u32 wow_hostwakeup_from_sleep_cmdid;
 947         u32 rtt_measreq_cmdid;
 948         u32 rtt_tsf_cmdid;
 949         u32 vdev_spectral_scan_configure_cmdid;
 950         u32 vdev_spectral_scan_enable_cmdid;
 951         u32 request_stats_cmdid;
 952         u32 request_peer_stats_info_cmdid;
 953         u32 set_arp_ns_offload_cmdid;
 954         u32 network_list_offload_config_cmdid;
 955         u32 gtk_offload_cmdid;
 956         u32 csa_offload_enable_cmdid;
 957         u32 csa_offload_chanswitch_cmdid;
 958         u32 chatter_set_mode_cmdid;
 959         u32 peer_tid_addba_cmdid;
 960         u32 peer_tid_delba_cmdid;
 961         u32 sta_dtim_ps_method_cmdid;
 962         u32 sta_uapsd_auto_trig_cmdid;
 963         u32 sta_keepalive_cmd;
 964         u32 echo_cmdid;
 965         u32 pdev_utf_cmdid;
 966         u32 dbglog_cfg_cmdid;
 967         u32 pdev_qvit_cmdid;
 968         u32 pdev_ftm_intg_cmdid;
 969         u32 vdev_set_keepalive_cmdid;
 970         u32 vdev_get_keepalive_cmdid;
 971         u32 force_fw_hang_cmdid;
 972         u32 gpio_config_cmdid;
 973         u32 gpio_output_cmdid;
 974         u32 pdev_get_temperature_cmdid;
 975         u32 vdev_set_wmm_params_cmdid;
 976         u32 tdls_set_state_cmdid;
 977         u32 tdls_peer_update_cmdid;
 978         u32 adaptive_qcs_cmdid;
 979         u32 scan_update_request_cmdid;
 980         u32 vdev_standby_response_cmdid;
 981         u32 vdev_resume_response_cmdid;
 982         u32 wlan_peer_caching_add_peer_cmdid;
 983         u32 wlan_peer_caching_evict_peer_cmdid;
 984         u32 wlan_peer_caching_restore_peer_cmdid;
 985         u32 wlan_peer_caching_print_all_peers_info_cmdid;
 986         u32 peer_update_wds_entry_cmdid;
 987         u32 peer_add_proxy_sta_entry_cmdid;
 988         u32 rtt_keepalive_cmdid;
 989         u32 oem_req_cmdid;
 990         u32 nan_cmdid;
 991         u32 vdev_ratemask_cmdid;
 992         u32 qboost_cfg_cmdid;
 993         u32 pdev_smart_ant_enable_cmdid;
 994         u32 pdev_smart_ant_set_rx_antenna_cmdid;
 995         u32 peer_smart_ant_set_tx_antenna_cmdid;
 996         u32 peer_smart_ant_set_train_info_cmdid;
 997         u32 peer_smart_ant_set_node_config_ops_cmdid;
 998         u32 pdev_set_antenna_switch_table_cmdid;
 999         u32 pdev_set_ctl_table_cmdid;
1000         u32 pdev_set_mimogain_table_cmdid;
1001         u32 pdev_ratepwr_table_cmdid;
1002         u32 pdev_ratepwr_chainmsk_table_cmdid;
1003         u32 pdev_fips_cmdid;
1004         u32 tt_set_conf_cmdid;
1005         u32 fwtest_cmdid;
1006         u32 vdev_atf_request_cmdid;
1007         u32 peer_atf_request_cmdid;
1008         u32 pdev_get_ani_cck_config_cmdid;
1009         u32 pdev_get_ani_ofdm_config_cmdid;
1010         u32 pdev_reserve_ast_entry_cmdid;
1011         u32 pdev_get_nfcal_power_cmdid;
1012         u32 pdev_get_tpc_cmdid;
1013         u32 pdev_get_ast_info_cmdid;
1014         u32 vdev_set_dscp_tid_map_cmdid;
1015         u32 pdev_get_info_cmdid;
1016         u32 vdev_get_info_cmdid;
1017         u32 vdev_filter_neighbor_rx_packets_cmdid;
1018         u32 mu_cal_start_cmdid;
1019         u32 set_cca_params_cmdid;
1020         u32 pdev_bss_chan_info_request_cmdid;
1021         u32 pdev_enable_adaptive_cca_cmdid;
1022         u32 ext_resource_cfg_cmdid;
1023         u32 vdev_set_ie_cmdid;
1024         u32 set_lteu_config_cmdid;
1025         u32 atf_ssid_grouping_request_cmdid;
1026         u32 peer_atf_ext_request_cmdid;
1027         u32 set_periodic_channel_stats_cfg_cmdid;
1028         u32 peer_bwf_request_cmdid;
1029         u32 btcoex_cfg_cmdid;
1030         u32 peer_tx_mu_txmit_count_cmdid;
1031         u32 peer_tx_mu_txmit_rstcnt_cmdid;
1032         u32 peer_gid_userpos_list_cmdid;
1033         u32 pdev_check_cal_version_cmdid;
1034         u32 coex_version_cfg_cmid;
1035         u32 pdev_get_rx_filter_cmdid;
1036         u32 pdev_extended_nss_cfg_cmdid;
1037         u32 vdev_set_scan_nac_rssi_cmdid;
1038         u32 prog_gpio_band_select_cmdid;
1039         u32 config_smart_logging_cmdid;
1040         u32 debug_fatal_condition_cmdid;
1041         u32 get_tsf_timer_cmdid;
1042         u32 pdev_get_tpc_table_cmdid;
1043         u32 vdev_sifs_trigger_time_cmdid;
1044         u32 pdev_wds_entry_list_cmdid;
1045         u32 tdls_set_offchan_mode_cmdid;
1046         u32 radar_found_cmdid;
1047         u32 set_bb_timing_cmdid;
1048         u32 per_peer_per_tid_config_cmdid;
1049 };
1050
1051 /*
1052  * wmi command groups.
1053  */
1054 enum wmi_cmd_group {
1055         /* 0 to 2 are reserved */
1056         WMI_GRP_START = 0x3,
1057         WMI_GRP_SCAN = WMI_GRP_START,
1058         WMI_GRP_PDEV,
1059         WMI_GRP_VDEV,
1060         WMI_GRP_PEER,
1061         WMI_GRP_MGMT,
1062         WMI_GRP_BA_NEG,
1063         WMI_GRP_STA_PS,
1064         WMI_GRP_DFS,
1065         WMI_GRP_ROAM,
1066         WMI_GRP_OFL_SCAN,
1067         WMI_GRP_P2P,
1068         WMI_GRP_AP_PS,
1069         WMI_GRP_RATE_CTRL,
1070         WMI_GRP_PROFILE,
1071         WMI_GRP_SUSPEND,
1072         WMI_GRP_BCN_FILTER,
1073         WMI_GRP_WOW,
1074         WMI_GRP_RTT,
1075         WMI_GRP_SPECTRAL,
1076         WMI_GRP_STATS,
1077         WMI_GRP_ARP_NS_OFL,
1078         WMI_GRP_NLO_OFL,
1079         WMI_GRP_GTK_OFL,
1080         WMI_GRP_CSA_OFL,
1081         WMI_GRP_CHATTER,
1082         WMI_GRP_TID_ADDBA,
1083         WMI_GRP_MISC,
1084         WMI_GRP_GPIO,
1085 };
1086
1087 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1088 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1089
1090 #define WMI_CMD_UNSUPPORTED 0
1091
1092 /* Command IDs and command events for MAIN FW. */
1093 enum wmi_cmd_id {
1094         WMI_INIT_CMDID = 0x1,
1095
1096         /* Scan specific commands */
1097         WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1098         WMI_STOP_SCAN_CMDID,
1099         WMI_SCAN_CHAN_LIST_CMDID,
1100         WMI_SCAN_SCH_PRIO_TBL_CMDID,
1101
1102         /* PDEV (physical device) specific commands */
1103         WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1104         WMI_PDEV_SET_CHANNEL_CMDID,
1105         WMI_PDEV_SET_PARAM_CMDID,
1106         WMI_PDEV_PKTLOG_ENABLE_CMDID,
1107         WMI_PDEV_PKTLOG_DISABLE_CMDID,
1108         WMI_PDEV_SET_WMM_PARAMS_CMDID,
1109         WMI_PDEV_SET_HT_CAP_IE_CMDID,
1110         WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1111         WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1112         WMI_PDEV_SET_QUIET_MODE_CMDID,
1113         WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1114         WMI_PDEV_GET_TPC_CONFIG_CMDID,
1115         WMI_PDEV_SET_BASE_MACADDR_CMDID,
1116
1117         /* VDEV (virtual device) specific commands */
1118         WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1119         WMI_VDEV_DELETE_CMDID,
1120         WMI_VDEV_START_REQUEST_CMDID,
1121         WMI_VDEV_RESTART_REQUEST_CMDID,
1122         WMI_VDEV_UP_CMDID,
1123         WMI_VDEV_STOP_CMDID,
1124         WMI_VDEV_DOWN_CMDID,
1125         WMI_VDEV_SET_PARAM_CMDID,
1126         WMI_VDEV_INSTALL_KEY_CMDID,
1127
1128         /* peer specific commands */
1129         WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1130         WMI_PEER_DELETE_CMDID,
1131         WMI_PEER_FLUSH_TIDS_CMDID,
1132         WMI_PEER_SET_PARAM_CMDID,
1133         WMI_PEER_ASSOC_CMDID,
1134         WMI_PEER_ADD_WDS_ENTRY_CMDID,
1135         WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1136         WMI_PEER_MCAST_GROUP_CMDID,
1137
1138         /* beacon/management specific commands */
1139         WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1140         WMI_PDEV_SEND_BCN_CMDID,
1141         WMI_BCN_TMPL_CMDID,
1142         WMI_BCN_FILTER_RX_CMDID,
1143         WMI_PRB_REQ_FILTER_RX_CMDID,
1144         WMI_MGMT_TX_CMDID,
1145         WMI_PRB_TMPL_CMDID,
1146
1147         /* commands to directly control BA negotiation directly from host. */
1148         WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1149         WMI_ADDBA_SEND_CMDID,
1150         WMI_ADDBA_STATUS_CMDID,
1151         WMI_DELBA_SEND_CMDID,
1152         WMI_ADDBA_SET_RESP_CMDID,
1153         WMI_SEND_SINGLEAMSDU_CMDID,
1154
1155         /* Station power save specific config */
1156         WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1157         WMI_STA_POWERSAVE_PARAM_CMDID,
1158         WMI_STA_MIMO_PS_MODE_CMDID,
1159
1160         /** DFS-specific commands */
1161         WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1162         WMI_PDEV_DFS_DISABLE_CMDID,
1163
1164         /* Roaming specific  commands */
1165         WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1166         WMI_ROAM_SCAN_RSSI_THRESHOLD,
1167         WMI_ROAM_SCAN_PERIOD,
1168         WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1169         WMI_ROAM_AP_PROFILE,
1170
1171         /* offload scan specific commands */
1172         WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1173         WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1174         WMI_OFL_SCAN_PERIOD,
1175
1176         /* P2P specific commands */
1177         WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1178         WMI_P2P_DEV_SET_DISCOVERABILITY,
1179         WMI_P2P_GO_SET_BEACON_IE,
1180         WMI_P2P_GO_SET_PROBE_RESP_IE,
1181         WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1182
1183         /* AP power save specific config */
1184         WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1185         WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1186
1187         /* Rate-control specific commands */
1188         WMI_PEER_RATE_RETRY_SCHED_CMDID =
1189         WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1190
1191         /* WLAN Profiling commands. */
1192         WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1193         WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1194         WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1195         WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1196         WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1197
1198         /* Suspend resume command Ids */
1199         WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1200         WMI_PDEV_RESUME_CMDID,
1201
1202         /* Beacon filter commands */
1203         WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1204         WMI_RMV_BCN_FILTER_CMDID,
1205
1206         /* WOW Specific WMI commands*/
1207         WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1208         WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1209         WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1210         WMI_WOW_ENABLE_CMDID,
1211         WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1212
1213         /* RTT measurement related cmd */
1214         WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1215         WMI_RTT_TSF_CMDID,
1216
1217         /* spectral scan commands */
1218         WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1219         WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1220
1221         /* F/W stats */
1222         WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1223
1224         /* ARP OFFLOAD REQUEST*/
1225         WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1226
1227         /* NS offload confid*/
1228         WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1229
1230         /* GTK offload Specific WMI commands*/
1231         WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1232
1233         /* CSA offload Specific WMI commands*/
1234         WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1235         WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1236
1237         /* Chatter commands*/
1238         WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1239
1240         /* addba specific commands */
1241         WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1242         WMI_PEER_TID_DELBA_CMDID,
1243
1244         /* set station mimo powersave method */
1245         WMI_STA_DTIM_PS_METHOD_CMDID,
1246         /* Configure the Station UAPSD AC Auto Trigger Parameters */
1247         WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1248
1249         /* STA Keep alive parameter configuration,
1250          * Requires WMI_SERVICE_STA_KEEP_ALIVE
1251          */
1252         WMI_STA_KEEPALIVE_CMD,
1253
1254         /* misc command group */
1255         WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1256         WMI_PDEV_UTF_CMDID,
1257         WMI_DBGLOG_CFG_CMDID,
1258         WMI_PDEV_QVIT_CMDID,
1259         WMI_PDEV_FTM_INTG_CMDID,
1260         WMI_VDEV_SET_KEEPALIVE_CMDID,
1261         WMI_VDEV_GET_KEEPALIVE_CMDID,
1262         WMI_FORCE_FW_HANG_CMDID,
1263
1264         /* GPIO Configuration */
1265         WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1266         WMI_GPIO_OUTPUT_CMDID,
1267 };
1268
1269 enum wmi_event_id {
1270         WMI_SERVICE_READY_EVENTID = 0x1,
1271         WMI_READY_EVENTID,
1272         WMI_SERVICE_AVAILABLE_EVENTID,
1273
1274         /* Scan specific events */
1275         WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1276
1277         /* PDEV specific events */
1278         WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1279         WMI_CHAN_INFO_EVENTID,
1280         WMI_PHYERR_EVENTID,
1281
1282         /* VDEV specific events */
1283         WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1284         WMI_VDEV_STOPPED_EVENTID,
1285         WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1286
1287         /* peer specific events */
1288         WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1289
1290         /* beacon/mgmt specific events */
1291         WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1292         WMI_HOST_SWBA_EVENTID,
1293         WMI_TBTTOFFSET_UPDATE_EVENTID,
1294
1295         /* ADDBA Related WMI Events*/
1296         WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1297         WMI_TX_ADDBA_COMPLETE_EVENTID,
1298
1299         /* Roam event to trigger roaming on host */
1300         WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1301         WMI_PROFILE_MATCH,
1302
1303         /* WoW */
1304         WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1305
1306         /* RTT */
1307         WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1308         WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1309         WMI_RTT_ERROR_REPORT_EVENTID,
1310
1311         /* GTK offload */
1312         WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1313         WMI_GTK_REKEY_FAIL_EVENTID,
1314
1315         /* CSA IE received event */
1316         WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1317
1318         /* Misc events */
1319         WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1320         WMI_PDEV_UTF_EVENTID,
1321         WMI_DEBUG_MESG_EVENTID,
1322         WMI_UPDATE_STATS_EVENTID,
1323         WMI_DEBUG_PRINT_EVENTID,
1324         WMI_DCS_INTERFERENCE_EVENTID,
1325         WMI_PDEV_QVIT_EVENTID,
1326         WMI_WLAN_PROFILE_DATA_EVENTID,
1327         WMI_PDEV_FTM_INTG_EVENTID,
1328         WMI_WLAN_FREQ_AVOID_EVENTID,
1329         WMI_VDEV_GET_KEEPALIVE_EVENTID,
1330
1331         /* GPIO Event */
1332         WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1333 };
1334
1335 /* Command IDs and command events for 10.X firmware */
1336 enum wmi_10x_cmd_id {
1337         WMI_10X_START_CMDID = 0x9000,
1338         WMI_10X_END_CMDID = 0x9FFF,
1339
1340         /* initialize the wlan sub system */
1341         WMI_10X_INIT_CMDID,
1342
1343         /* Scan specific commands */
1344
1345         WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1346         WMI_10X_STOP_SCAN_CMDID,
1347         WMI_10X_SCAN_CHAN_LIST_CMDID,
1348         WMI_10X_ECHO_CMDID,
1349
1350         /* PDEV(physical device) specific commands */
1351         WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1352         WMI_10X_PDEV_SET_CHANNEL_CMDID,
1353         WMI_10X_PDEV_SET_PARAM_CMDID,
1354         WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1355         WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1356         WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1357         WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1358         WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1359         WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1360         WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1361         WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1362         WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1363         WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1364
1365         /* VDEV(virtual device) specific commands */
1366         WMI_10X_VDEV_CREATE_CMDID,
1367         WMI_10X_VDEV_DELETE_CMDID,
1368         WMI_10X_VDEV_START_REQUEST_CMDID,
1369         WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1370         WMI_10X_VDEV_UP_CMDID,
1371         WMI_10X_VDEV_STOP_CMDID,
1372         WMI_10X_VDEV_DOWN_CMDID,
1373         WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1374         WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1375         WMI_10X_VDEV_SET_PARAM_CMDID,
1376         WMI_10X_VDEV_INSTALL_KEY_CMDID,
1377
1378         /* peer specific commands */
1379         WMI_10X_PEER_CREATE_CMDID,
1380         WMI_10X_PEER_DELETE_CMDID,
1381         WMI_10X_PEER_FLUSH_TIDS_CMDID,
1382         WMI_10X_PEER_SET_PARAM_CMDID,
1383         WMI_10X_PEER_ASSOC_CMDID,
1384         WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1385         WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1386         WMI_10X_PEER_MCAST_GROUP_CMDID,
1387
1388         /* beacon/management specific commands */
1389
1390         WMI_10X_BCN_TX_CMDID,
1391         WMI_10X_BCN_PRB_TMPL_CMDID,
1392         WMI_10X_BCN_FILTER_RX_CMDID,
1393         WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1394         WMI_10X_MGMT_TX_CMDID,
1395
1396         /* commands to directly control ba negotiation directly from host. */
1397         WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1398         WMI_10X_ADDBA_SEND_CMDID,
1399         WMI_10X_ADDBA_STATUS_CMDID,
1400         WMI_10X_DELBA_SEND_CMDID,
1401         WMI_10X_ADDBA_SET_RESP_CMDID,
1402         WMI_10X_SEND_SINGLEAMSDU_CMDID,
1403
1404         /* Station power save specific config */
1405         WMI_10X_STA_POWERSAVE_MODE_CMDID,
1406         WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1407         WMI_10X_STA_MIMO_PS_MODE_CMDID,
1408
1409         /* set debug log config */
1410         WMI_10X_DBGLOG_CFG_CMDID,
1411
1412         /* DFS-specific commands */
1413         WMI_10X_PDEV_DFS_ENABLE_CMDID,
1414         WMI_10X_PDEV_DFS_DISABLE_CMDID,
1415
1416         /* QVIT specific command id */
1417         WMI_10X_PDEV_QVIT_CMDID,
1418
1419         /* Offload Scan and Roaming related  commands */
1420         WMI_10X_ROAM_SCAN_MODE,
1421         WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1422         WMI_10X_ROAM_SCAN_PERIOD,
1423         WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1424         WMI_10X_ROAM_AP_PROFILE,
1425         WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1426         WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1427         WMI_10X_OFL_SCAN_PERIOD,
1428
1429         /* P2P specific commands */
1430         WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1431         WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1432         WMI_10X_P2P_GO_SET_BEACON_IE,
1433         WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1434
1435         /* AP power save specific config */
1436         WMI_10X_AP_PS_PEER_PARAM_CMDID,
1437         WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1438
1439         /* Rate-control specific commands */
1440         WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1441
1442         /* WLAN Profiling commands. */
1443         WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1444         WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1445         WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1446         WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1447         WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1448
1449         /* Suspend resume command Ids */
1450         WMI_10X_PDEV_SUSPEND_CMDID,
1451         WMI_10X_PDEV_RESUME_CMDID,
1452
1453         /* Beacon filter commands */
1454         WMI_10X_ADD_BCN_FILTER_CMDID,
1455         WMI_10X_RMV_BCN_FILTER_CMDID,
1456
1457         /* WOW Specific WMI commands*/
1458         WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1459         WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1460         WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1461         WMI_10X_WOW_ENABLE_CMDID,
1462         WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1463
1464         /* RTT measurement related cmd */
1465         WMI_10X_RTT_MEASREQ_CMDID,
1466         WMI_10X_RTT_TSF_CMDID,
1467
1468         /* transmit beacon by value */
1469         WMI_10X_PDEV_SEND_BCN_CMDID,
1470
1471         /* F/W stats */
1472         WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1473         WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1474         WMI_10X_REQUEST_STATS_CMDID,
1475
1476         /* GPIO Configuration */
1477         WMI_10X_GPIO_CONFIG_CMDID,
1478         WMI_10X_GPIO_OUTPUT_CMDID,
1479
1480         WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1481 };
1482
1483 enum wmi_10x_event_id {
1484         WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1485         WMI_10X_READY_EVENTID,
1486         WMI_10X_START_EVENTID = 0x9000,
1487         WMI_10X_END_EVENTID = 0x9FFF,
1488
1489         /* Scan specific events */
1490         WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1491         WMI_10X_ECHO_EVENTID,
1492         WMI_10X_DEBUG_MESG_EVENTID,
1493         WMI_10X_UPDATE_STATS_EVENTID,
1494
1495         /* Instantaneous RSSI event */
1496         WMI_10X_INST_RSSI_STATS_EVENTID,
1497
1498         /* VDEV specific events */
1499         WMI_10X_VDEV_START_RESP_EVENTID,
1500         WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1501         WMI_10X_VDEV_RESUME_REQ_EVENTID,
1502         WMI_10X_VDEV_STOPPED_EVENTID,
1503
1504         /* peer  specific events */
1505         WMI_10X_PEER_STA_KICKOUT_EVENTID,
1506
1507         /* beacon/mgmt specific events */
1508         WMI_10X_HOST_SWBA_EVENTID,
1509         WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1510         WMI_10X_MGMT_RX_EVENTID,
1511
1512         /* Channel stats event */
1513         WMI_10X_CHAN_INFO_EVENTID,
1514
1515         /* PHY Error specific WMI event */
1516         WMI_10X_PHYERR_EVENTID,
1517
1518         /* Roam event to trigger roaming on host */
1519         WMI_10X_ROAM_EVENTID,
1520
1521         /* matching AP found from list of profiles */
1522         WMI_10X_PROFILE_MATCH,
1523
1524         /* debug print message used for tracing FW code while debugging */
1525         WMI_10X_DEBUG_PRINT_EVENTID,
1526         /* VI spoecific event */
1527         WMI_10X_PDEV_QVIT_EVENTID,
1528         /* FW code profile data in response to profile request */
1529         WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1530
1531         /*RTT related event ID*/
1532         WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1533         WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1534         WMI_10X_RTT_ERROR_REPORT_EVENTID,
1535
1536         WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1537         WMI_10X_DCS_INTERFERENCE_EVENTID,
1538
1539         /* TPC config for the current operating channel */
1540         WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1541
1542         WMI_10X_GPIO_INPUT_EVENTID,
1543         WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1544 };
1545
1546 enum wmi_10_2_cmd_id {
1547         WMI_10_2_START_CMDID = 0x9000,
1548         WMI_10_2_END_CMDID = 0x9FFF,
1549         WMI_10_2_INIT_CMDID,
1550         WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1551         WMI_10_2_STOP_SCAN_CMDID,
1552         WMI_10_2_SCAN_CHAN_LIST_CMDID,
1553         WMI_10_2_ECHO_CMDID,
1554         WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1555         WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1556         WMI_10_2_PDEV_SET_PARAM_CMDID,
1557         WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1558         WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1559         WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1560         WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1561         WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1562         WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1563         WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1564         WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1565         WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1566         WMI_10_2_VDEV_CREATE_CMDID,
1567         WMI_10_2_VDEV_DELETE_CMDID,
1568         WMI_10_2_VDEV_START_REQUEST_CMDID,
1569         WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1570         WMI_10_2_VDEV_UP_CMDID,
1571         WMI_10_2_VDEV_STOP_CMDID,
1572         WMI_10_2_VDEV_DOWN_CMDID,
1573         WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1574         WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1575         WMI_10_2_VDEV_SET_PARAM_CMDID,
1576         WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1577         WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1578         WMI_10_2_PEER_CREATE_CMDID,
1579         WMI_10_2_PEER_DELETE_CMDID,
1580         WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1581         WMI_10_2_PEER_SET_PARAM_CMDID,
1582         WMI_10_2_PEER_ASSOC_CMDID,
1583         WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1584         WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1585         WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1586         WMI_10_2_PEER_MCAST_GROUP_CMDID,
1587         WMI_10_2_BCN_TX_CMDID,
1588         WMI_10_2_BCN_PRB_TMPL_CMDID,
1589         WMI_10_2_BCN_FILTER_RX_CMDID,
1590         WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1591         WMI_10_2_MGMT_TX_CMDID,
1592         WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1593         WMI_10_2_ADDBA_SEND_CMDID,
1594         WMI_10_2_ADDBA_STATUS_CMDID,
1595         WMI_10_2_DELBA_SEND_CMDID,
1596         WMI_10_2_ADDBA_SET_RESP_CMDID,
1597         WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1598         WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1599         WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1600         WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1601         WMI_10_2_DBGLOG_CFG_CMDID,
1602         WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1603         WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1604         WMI_10_2_PDEV_QVIT_CMDID,
1605         WMI_10_2_ROAM_SCAN_MODE,
1606         WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1607         WMI_10_2_ROAM_SCAN_PERIOD,
1608         WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1609         WMI_10_2_ROAM_AP_PROFILE,
1610         WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1611         WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1612         WMI_10_2_OFL_SCAN_PERIOD,
1613         WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1614         WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1615         WMI_10_2_P2P_GO_SET_BEACON_IE,
1616         WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1617         WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1618         WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1619         WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1620         WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1621         WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1622         WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1623         WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1624         WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1625         WMI_10_2_PDEV_SUSPEND_CMDID,
1626         WMI_10_2_PDEV_RESUME_CMDID,
1627         WMI_10_2_ADD_BCN_FILTER_CMDID,
1628         WMI_10_2_RMV_BCN_FILTER_CMDID,
1629         WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1630         WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1631         WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1632         WMI_10_2_WOW_ENABLE_CMDID,
1633         WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1634         WMI_10_2_RTT_MEASREQ_CMDID,
1635         WMI_10_2_RTT_TSF_CMDID,
1636         WMI_10_2_RTT_KEEPALIVE_CMDID,
1637         WMI_10_2_PDEV_SEND_BCN_CMDID,
1638         WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1639         WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1640         WMI_10_2_REQUEST_STATS_CMDID,
1641         WMI_10_2_GPIO_CONFIG_CMDID,
1642         WMI_10_2_GPIO_OUTPUT_CMDID,
1643         WMI_10_2_VDEV_RATEMASK_CMDID,
1644         WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1645         WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1646         WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1647         WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1648         WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1649         WMI_10_2_FORCE_FW_HANG_CMDID,
1650         WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1651         WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1652         WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1653         WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1654         WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1655         WMI_10_2_PDEV_GET_INFO,
1656         WMI_10_2_VDEV_GET_INFO,
1657         WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1658         WMI_10_2_PEER_ATF_REQUEST_CMDID,
1659         WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1660         WMI_10_2_MU_CAL_START_CMDID,
1661         WMI_10_2_SET_LTEU_CONFIG_CMDID,
1662         WMI_10_2_SET_CCA_PARAMS,
1663         WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1664         WMI_10_2_FWTEST_CMDID,
1665         WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1666         WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1667 };
1668
1669 enum wmi_10_2_event_id {
1670         WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1671         WMI_10_2_READY_EVENTID,
1672         WMI_10_2_DEBUG_MESG_EVENTID,
1673         WMI_10_2_START_EVENTID = 0x9000,
1674         WMI_10_2_END_EVENTID = 0x9FFF,
1675         WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1676         WMI_10_2_ECHO_EVENTID,
1677         WMI_10_2_UPDATE_STATS_EVENTID,
1678         WMI_10_2_INST_RSSI_STATS_EVENTID,
1679         WMI_10_2_VDEV_START_RESP_EVENTID,
1680         WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1681         WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1682         WMI_10_2_VDEV_STOPPED_EVENTID,
1683         WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1684         WMI_10_2_HOST_SWBA_EVENTID,
1685         WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1686         WMI_10_2_MGMT_RX_EVENTID,
1687         WMI_10_2_CHAN_INFO_EVENTID,
1688         WMI_10_2_PHYERR_EVENTID,
1689         WMI_10_2_ROAM_EVENTID,
1690         WMI_10_2_PROFILE_MATCH,
1691         WMI_10_2_DEBUG_PRINT_EVENTID,
1692         WMI_10_2_PDEV_QVIT_EVENTID,
1693         WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1694         WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1695         WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1696         WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1697         WMI_10_2_RTT_KEEPALIVE_EVENTID,
1698         WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1699         WMI_10_2_DCS_INTERFERENCE_EVENTID,
1700         WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1701         WMI_10_2_GPIO_INPUT_EVENTID,
1702         WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1703         WMI_10_2_GENERIC_BUFFER_EVENTID,
1704         WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1705         WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1706         WMI_10_2_WDS_PEER_EVENTID,
1707         WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1708         WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1709         WMI_10_2_MU_REPORT_EVENTID,
1710         WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1711         WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1712 };
1713
1714 enum wmi_10_4_cmd_id {
1715         WMI_10_4_START_CMDID = 0x9000,
1716         WMI_10_4_END_CMDID = 0x9FFF,
1717         WMI_10_4_INIT_CMDID,
1718         WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1719         WMI_10_4_STOP_SCAN_CMDID,
1720         WMI_10_4_SCAN_CHAN_LIST_CMDID,
1721         WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1722         WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1723         WMI_10_4_ECHO_CMDID,
1724         WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1725         WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1726         WMI_10_4_PDEV_SET_PARAM_CMDID,
1727         WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1728         WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1729         WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1730         WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1731         WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1732         WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1733         WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1734         WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1735         WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1736         WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1737         WMI_10_4_VDEV_CREATE_CMDID,
1738         WMI_10_4_VDEV_DELETE_CMDID,
1739         WMI_10_4_VDEV_START_REQUEST_CMDID,
1740         WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1741         WMI_10_4_VDEV_UP_CMDID,
1742         WMI_10_4_VDEV_STOP_CMDID,
1743         WMI_10_4_VDEV_DOWN_CMDID,
1744         WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1745         WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1746         WMI_10_4_VDEV_SET_PARAM_CMDID,
1747         WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1748         WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1749         WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1750         WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1751         WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1752         WMI_10_4_PEER_CREATE_CMDID,
1753         WMI_10_4_PEER_DELETE_CMDID,
1754         WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1755         WMI_10_4_PEER_SET_PARAM_CMDID,
1756         WMI_10_4_PEER_ASSOC_CMDID,
1757         WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1758         WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1759         WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1760         WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1761         WMI_10_4_PEER_MCAST_GROUP_CMDID,
1762         WMI_10_4_BCN_TX_CMDID,
1763         WMI_10_4_PDEV_SEND_BCN_CMDID,
1764         WMI_10_4_BCN_PRB_TMPL_CMDID,
1765         WMI_10_4_BCN_FILTER_RX_CMDID,
1766         WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1767         WMI_10_4_MGMT_TX_CMDID,
1768         WMI_10_4_PRB_TMPL_CMDID,
1769         WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1770         WMI_10_4_ADDBA_SEND_CMDID,
1771         WMI_10_4_ADDBA_STATUS_CMDID,
1772         WMI_10_4_DELBA_SEND_CMDID,
1773         WMI_10_4_ADDBA_SET_RESP_CMDID,
1774         WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1775         WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1776         WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1777         WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1778         WMI_10_4_DBGLOG_CFG_CMDID,
1779         WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1780         WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1781         WMI_10_4_PDEV_QVIT_CMDID,
1782         WMI_10_4_ROAM_SCAN_MODE,
1783         WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1784         WMI_10_4_ROAM_SCAN_PERIOD,
1785         WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1786         WMI_10_4_ROAM_AP_PROFILE,
1787         WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1788         WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1789         WMI_10_4_OFL_SCAN_PERIOD,
1790         WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1791         WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1792         WMI_10_4_P2P_GO_SET_BEACON_IE,
1793         WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1794         WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1795         WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1796         WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1797         WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1798         WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1799         WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1800         WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1801         WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1802         WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1803         WMI_10_4_PDEV_SUSPEND_CMDID,
1804         WMI_10_4_PDEV_RESUME_CMDID,
1805         WMI_10_4_ADD_BCN_FILTER_CMDID,
1806         WMI_10_4_RMV_BCN_FILTER_CMDID,
1807         WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1808         WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1809         WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1810         WMI_10_4_WOW_ENABLE_CMDID,
1811         WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1812         WMI_10_4_RTT_MEASREQ_CMDID,
1813         WMI_10_4_RTT_TSF_CMDID,
1814         WMI_10_4_RTT_KEEPALIVE_CMDID,
1815         WMI_10_4_OEM_REQ_CMDID,
1816         WMI_10_4_NAN_CMDID,
1817         WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1818         WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1819         WMI_10_4_REQUEST_STATS_CMDID,
1820         WMI_10_4_GPIO_CONFIG_CMDID,
1821         WMI_10_4_GPIO_OUTPUT_CMDID,
1822         WMI_10_4_VDEV_RATEMASK_CMDID,
1823         WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1824         WMI_10_4_GTK_OFFLOAD_CMDID,
1825         WMI_10_4_QBOOST_CFG_CMDID,
1826         WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1827         WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1828         WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1829         WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1830         WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1831         WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1832         WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1833         WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1834         WMI_10_4_FORCE_FW_HANG_CMDID,
1835         WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1836         WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1837         WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1838         WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1839         WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1840         WMI_10_4_PDEV_FIPS_CMDID,
1841         WMI_10_4_TT_SET_CONF_CMDID,
1842         WMI_10_4_FWTEST_CMDID,
1843         WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1844         WMI_10_4_PEER_ATF_REQUEST_CMDID,
1845         WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1846         WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1847         WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1848         WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1849         WMI_10_4_PDEV_GET_TPC_CMDID,
1850         WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1851         WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1852         WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1853         WMI_10_4_PDEV_GET_INFO_CMDID,
1854         WMI_10_4_VDEV_GET_INFO_CMDID,
1855         WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1856         WMI_10_4_MU_CAL_START_CMDID,
1857         WMI_10_4_SET_CCA_PARAMS_CMDID,
1858         WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1859         WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1860         WMI_10_4_VDEV_SET_IE_CMDID,
1861         WMI_10_4_SET_LTEU_CONFIG_CMDID,
1862         WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1863         WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1864         WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1865         WMI_10_4_PEER_BWF_REQUEST_CMDID,
1866         WMI_10_4_BTCOEX_CFG_CMDID,
1867         WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1868         WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1869         WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1870         WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1871         WMI_10_4_COEX_VERSION_CFG_CMID,
1872         WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1873         WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1874         WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1875         WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1876         WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1877         WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1878         WMI_10_4_GET_TSF_TIMER_CMDID,
1879         WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1880         WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1881         WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1882         WMI_10_4_TDLS_SET_STATE_CMDID,
1883         WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1884         WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1885         WMI_10_4_PDEV_SEND_FD_CMDID,
1886         WMI_10_4_ENABLE_FILS_CMDID,
1887         WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1888         WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1889         WMI_10_4_RADAR_FOUND_CMDID,
1890         WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1891         WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1892         WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1893 };
1894
1895 enum wmi_10_4_event_id {
1896         WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1897         WMI_10_4_READY_EVENTID,
1898         WMI_10_4_DEBUG_MESG_EVENTID,
1899         WMI_10_4_START_EVENTID = 0x9000,
1900         WMI_10_4_END_EVENTID = 0x9FFF,
1901         WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1902         WMI_10_4_ECHO_EVENTID,
1903         WMI_10_4_UPDATE_STATS_EVENTID,
1904         WMI_10_4_INST_RSSI_STATS_EVENTID,
1905         WMI_10_4_VDEV_START_RESP_EVENTID,
1906         WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1907         WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1908         WMI_10_4_VDEV_STOPPED_EVENTID,
1909         WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1910         WMI_10_4_HOST_SWBA_EVENTID,
1911         WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1912         WMI_10_4_MGMT_RX_EVENTID,
1913         WMI_10_4_CHAN_INFO_EVENTID,
1914         WMI_10_4_PHYERR_EVENTID,
1915         WMI_10_4_ROAM_EVENTID,
1916         WMI_10_4_PROFILE_MATCH,
1917         WMI_10_4_DEBUG_PRINT_EVENTID,
1918         WMI_10_4_PDEV_QVIT_EVENTID,
1919         WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1920         WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1921         WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1922         WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1923         WMI_10_4_RTT_KEEPALIVE_EVENTID,
1924         WMI_10_4_OEM_CAPABILITY_EVENTID,
1925         WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1926         WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1927         WMI_10_4_NAN_EVENTID,
1928         WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1929         WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1930         WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1931         WMI_10_4_DCS_INTERFERENCE_EVENTID,
1932         WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1933         WMI_10_4_CSA_HANDLING_EVENTID,
1934         WMI_10_4_GPIO_INPUT_EVENTID,
1935         WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1936         WMI_10_4_GENERIC_BUFFER_EVENTID,
1937         WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1938         WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1939         WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1940         WMI_10_4_WDS_PEER_EVENTID,
1941         WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1942         WMI_10_4_PDEV_FIPS_EVENTID,
1943         WMI_10_4_TT_STATS_EVENTID,
1944         WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1945         WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1946         WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1947         WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1948         WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1949         WMI_10_4_PDEV_TPC_EVENTID,
1950         WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1951         WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1952         WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1953         WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1954         WMI_10_4_MU_REPORT_EVENTID,
1955         WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1956         WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1957         WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1958         WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1959         WMI_10_4_ATF_PEER_STATS_EVENTID,
1960         WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1961         WMI_10_4_NAC_RSSI_EVENTID,
1962         WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1963         WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1964         WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1965         WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1966         WMI_10_4_TDLS_PEER_EVENTID,
1967         WMI_10_4_HOST_SWFDA_EVENTID,
1968         WMI_10_4_ESP_ESTIMATE_EVENTID,
1969         WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1970         WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1971 };
1972
1973 enum wmi_phy_mode {
1974         MODE_11A        = 0,   /* 11a Mode */
1975         MODE_11G        = 1,   /* 11b/g Mode */
1976         MODE_11B        = 2,   /* 11b Mode */
1977         MODE_11GONLY    = 3,   /* 11g only Mode */
1978         MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
1979         MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
1980         MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
1981         MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
1982         MODE_11AC_VHT20 = 8,
1983         MODE_11AC_VHT40 = 9,
1984         MODE_11AC_VHT80 = 10,
1985         /*    MODE_11AC_VHT160 = 11, */
1986         MODE_11AC_VHT20_2G = 11,
1987         MODE_11AC_VHT40_2G = 12,
1988         MODE_11AC_VHT80_2G = 13,
1989         MODE_11AC_VHT80_80 = 14,
1990         MODE_11AC_VHT160 = 15,
1991         MODE_UNKNOWN    = 16,
1992         MODE_MAX        = 16
1993 };
1994
1995 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1996 {
1997         switch (mode) {
1998         case MODE_11A:
1999                 return "11a";
2000         case MODE_11G:
2001                 return "11g";
2002         case MODE_11B:
2003                 return "11b";
2004         case MODE_11GONLY:
2005                 return "11gonly";
2006         case MODE_11NA_HT20:
2007                 return "11na-ht20";
2008         case MODE_11NG_HT20:
2009                 return "11ng-ht20";
2010         case MODE_11NA_HT40:
2011                 return "11na-ht40";
2012         case MODE_11NG_HT40:
2013                 return "11ng-ht40";
2014         case MODE_11AC_VHT20:
2015                 return "11ac-vht20";
2016         case MODE_11AC_VHT40:
2017                 return "11ac-vht40";
2018         case MODE_11AC_VHT80:
2019                 return "11ac-vht80";
2020         case MODE_11AC_VHT160:
2021                 return "11ac-vht160";
2022         case MODE_11AC_VHT80_80:
2023                 return "11ac-vht80+80";
2024         case MODE_11AC_VHT20_2G:
2025                 return "11ac-vht20-2g";
2026         case MODE_11AC_VHT40_2G:
2027                 return "11ac-vht40-2g";
2028         case MODE_11AC_VHT80_2G:
2029                 return "11ac-vht80-2g";
2030         case MODE_UNKNOWN:
2031                 /* skip */
2032                 break;
2033
2034                 /* no default handler to allow compiler to check that the
2035                  * enum is fully handled
2036                  */
2037         }
2038
2039         return "<unknown>";
2040 }
2041
2042 #define WMI_CHAN_LIST_TAG       0x1
2043 #define WMI_SSID_LIST_TAG       0x2
2044 #define WMI_BSSID_LIST_TAG      0x3
2045 #define WMI_IE_TAG              0x4
2046
2047 struct wmi_channel {
2048         __le32 mhz;
2049         __le32 band_center_freq1;
2050         __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2051         union {
2052                 __le32 flags; /* WMI_CHAN_FLAG_ */
2053                 struct {
2054                         u8 mode; /* only 6 LSBs */
2055                 } __packed;
2056         } __packed;
2057         union {
2058                 __le32 reginfo0;
2059                 struct {
2060                         /* note: power unit is 0.5 dBm */
2061                         u8 min_power;
2062                         u8 max_power;
2063                         u8 reg_power;
2064                         u8 reg_classid;
2065                 } __packed;
2066         } __packed;
2067         union {
2068                 __le32 reginfo1;
2069                 struct {
2070                         /* note: power unit is 1 dBm */
2071                         u8 antenna_max;
2072                         /* note: power unit is 0.5 dBm */
2073                         u8 max_tx_power;
2074                 } __packed;
2075         } __packed;
2076 } __packed;
2077
2078 struct wmi_channel_arg {
2079         u32 freq;
2080         u32 band_center_freq1;
2081         u32 band_center_freq2;
2082         bool passive;
2083         bool allow_ibss;
2084         bool allow_ht;
2085         bool allow_vht;
2086         bool ht40plus;
2087         bool chan_radar;
2088         /* note: power unit is 0.5 dBm */
2089         u32 min_power;
2090         u32 max_power;
2091         u32 max_reg_power;
2092         /* note: power unit is 1 dBm */
2093         u32 max_antenna_gain;
2094         u32 reg_class_id;
2095         enum wmi_phy_mode mode;
2096 };
2097
2098 enum wmi_channel_change_cause {
2099         WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2100         WMI_CHANNEL_CHANGE_CAUSE_CSA,
2101 };
2102
2103 #define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
2104 #define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
2105 #define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
2106 #define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
2107 #define WMI_CHAN_FLAG_DFS            (1 << 10)
2108 #define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
2109 #define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
2110
2111 /* Indicate reason for channel switch */
2112 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2113 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2114 #define WMI_CHAN_FLAG_DFS_CFREQ2  (1 << 15)
2115 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
2116
2117 /* HT Capabilities*/
2118 #define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
2119 #define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
2120 #define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
2121 #define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
2122 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
2123 #define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
2124 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
2125 #define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
2126 #define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
2127 #define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
2128 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2129 #define WMI_HT_CAP_HT40_SGI               0x0800
2130 #define WMI_HT_CAP_RX_LDPC                0x1000   /* LDPC RX support */
2131 #define WMI_HT_CAP_TX_LDPC                0x2000   /* LDPC TX support */
2132
2133 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
2134                                 WMI_HT_CAP_HT20_SGI      | \
2135                                 WMI_HT_CAP_HT40_SGI      | \
2136                                 WMI_HT_CAP_TX_STBC       | \
2137                                 WMI_HT_CAP_RX_STBC       | \
2138                                 WMI_HT_CAP_LDPC)
2139
2140 /*
2141  * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2142  * field. The fields not defined here are not supported, or reserved.
2143  * Do not change these masks and if you have to add new one follow the
2144  * bitmask as specified by 802.11ac draft.
2145  */
2146
2147 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
2148 #define WMI_VHT_CAP_RX_LDPC                      0x00000010
2149 #define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
2150 #define WMI_VHT_CAP_SGI_160MHZ                   0x00000040
2151 #define WMI_VHT_CAP_TX_STBC                      0x00000080
2152 #define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
2153 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
2154 #define WMI_VHT_CAP_SU_BFER                      0x00000800
2155 #define WMI_VHT_CAP_SU_BFEE                      0x00001000
2156 #define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E000
2157 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        13
2158 #define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x00070000
2159 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       16
2160 #define WMI_VHT_CAP_MU_BFER                      0x00080000
2161 #define WMI_VHT_CAP_MU_BFEE                      0x00100000
2162 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
2163 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
2164 #define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
2165 #define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
2166
2167 /* The following also refer for max HT AMSDU */
2168 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
2169 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
2170 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
2171
2172 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
2173                                  WMI_VHT_CAP_RX_LDPC             | \
2174                                  WMI_VHT_CAP_SGI_80MHZ           | \
2175                                  WMI_VHT_CAP_TX_STBC             | \
2176                                  WMI_VHT_CAP_RX_STBC_MASK        | \
2177                                  WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
2178                                  WMI_VHT_CAP_RX_FIXED_ANT        | \
2179                                  WMI_VHT_CAP_TX_FIXED_ANT)
2180
2181 /*
2182  * Interested readers refer to Rx/Tx MCS Map definition as defined in
2183  * 802.11ac
2184  */
2185 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
2186 #define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
2187 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
2188
2189 enum {
2190         REGDMN_MODE_11A              = 0x00001, /* 11a channels */
2191         REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
2192         REGDMN_MODE_11B              = 0x00004, /* 11b channels */
2193         REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
2194         REGDMN_MODE_11G              = 0x00008, /* XXX historical */
2195         REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
2196         REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
2197         REGDMN_MODE_XR               = 0x00100, /* XR channels */
2198         REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
2199         REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2200         REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
2201         REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
2202         REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
2203         REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
2204         REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
2205         REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
2206         REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
2207         REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
2208         REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
2209         REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
2210         REGDMN_MODE_11AC_VHT160      = 0x200000,     /* 5Ghz, VHT160 channels */
2211         REGDMN_MODE_11AC_VHT80_80    = 0x400000,     /* 5Ghz, VHT80+80 channels */
2212         REGDMN_MODE_ALL              = 0xffffffff
2213 };
2214
2215 #define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
2216 #define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
2217 #define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
2218
2219 /* regulatory capabilities */
2220 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
2221 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
2222 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
2223 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
2224 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
2225 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
2226
2227 struct hal_reg_capabilities {
2228         /* regdomain value specified in EEPROM */
2229         __le32 eeprom_rd;
2230         /*regdomain */
2231         __le32 eeprom_rd_ext;
2232         /* CAP1 capabilities bit map. */
2233         __le32 regcap1;
2234         /* REGDMN EEPROM CAP. */
2235         __le32 regcap2;
2236         /* REGDMN MODE */
2237         __le32 wireless_modes;
2238         __le32 low_2ghz_chan;
2239         __le32 high_2ghz_chan;
2240         __le32 low_5ghz_chan;
2241         __le32 high_5ghz_chan;
2242 } __packed;
2243
2244 enum wlan_mode_capability {
2245         WHAL_WLAN_11A_CAPABILITY   = 0x1,
2246         WHAL_WLAN_11G_CAPABILITY   = 0x2,
2247         WHAL_WLAN_11AG_CAPABILITY  = 0x3,
2248 };
2249
2250 /* structure used by FW for requesting host memory */
2251 struct wlan_host_mem_req {
2252         /* ID of the request */
2253         __le32 req_id;
2254         /* size of the  of each unit */
2255         __le32 unit_size;
2256         /* flags to  indicate that
2257          * the number units is dependent
2258          * on number of resources(num vdevs num peers .. etc)
2259          */
2260         __le32 num_unit_info;
2261         /*
2262          * actual number of units to allocate . if flags in the num_unit_info
2263          * indicate that number of units is tied to number of a particular
2264          * resource to allocate then  num_units filed is set to 0 and host
2265          * will derive the number units from number of the resources it is
2266          * requesting.
2267          */
2268         __le32 num_units;
2269 } __packed;
2270
2271 /*
2272  * The following struct holds optional payload for
2273  * wmi_service_ready_event,e.g., 11ac pass some of the
2274  * device capability to the host.
2275  */
2276 struct wmi_service_ready_event {
2277         __le32 sw_version;
2278         __le32 sw_version_1;
2279         __le32 abi_version;
2280         /* WMI_PHY_CAPABILITY */
2281         __le32 phy_capability;
2282         /* Maximum number of frag table entries that SW will populate less 1 */
2283         __le32 max_frag_entry;
2284         __le32 wmi_service_bitmap[16];
2285         __le32 num_rf_chains;
2286         /*
2287          * The following field is only valid for service type
2288          * WMI_SERVICE_11AC
2289          */
2290         __le32 ht_cap_info; /* WMI HT Capability */
2291         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2292         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2293         __le32 hw_min_tx_power;
2294         __le32 hw_max_tx_power;
2295         struct hal_reg_capabilities hal_reg_capabilities;
2296         __le32 sys_cap_info;
2297         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2298         /*
2299          * Max beacon and Probe Response IE offload size
2300          * (includes optional P2P IEs)
2301          */
2302         __le32 max_bcn_ie_size;
2303         /*
2304          * request to host to allocate a chuck of memory and pss it down to FW
2305          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2306          * data structures. Only valid for low latency interfaces like PCIE
2307          * where FW can access this memory directly (or) by DMA.
2308          */
2309         __le32 num_mem_reqs;
2310         struct wlan_host_mem_req mem_reqs[];
2311 } __packed;
2312
2313 /* This is the definition from 10.X firmware branch */
2314 struct wmi_10x_service_ready_event {
2315         __le32 sw_version;
2316         __le32 abi_version;
2317
2318         /* WMI_PHY_CAPABILITY */
2319         __le32 phy_capability;
2320
2321         /* Maximum number of frag table entries that SW will populate less 1 */
2322         __le32 max_frag_entry;
2323         __le32 wmi_service_bitmap[16];
2324         __le32 num_rf_chains;
2325
2326         /*
2327          * The following field is only valid for service type
2328          * WMI_SERVICE_11AC
2329          */
2330         __le32 ht_cap_info; /* WMI HT Capability */
2331         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2332         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2333         __le32 hw_min_tx_power;
2334         __le32 hw_max_tx_power;
2335
2336         struct hal_reg_capabilities hal_reg_capabilities;
2337
2338         __le32 sys_cap_info;
2339         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2340
2341         /*
2342          * request to host to allocate a chuck of memory and pss it down to FW
2343          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2344          * data structures. Only valid for low latency interfaces like PCIE
2345          * where FW can access this memory directly (or) by DMA.
2346          */
2347         __le32 num_mem_reqs;
2348
2349         struct wlan_host_mem_req mem_reqs[];
2350 } __packed;
2351
2352 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2353 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2354
2355 struct wmi_ready_event {
2356         __le32 sw_version;
2357         __le32 abi_version;
2358         struct wmi_mac_addr mac_addr;
2359         __le32 status;
2360 } __packed;
2361
2362 struct wmi_resource_config {
2363         /* number of virtual devices (VAPs) to support */
2364         __le32 num_vdevs;
2365
2366         /* number of peer nodes to support */
2367         __le32 num_peers;
2368
2369         /*
2370          * In offload mode target supports features like WOW, chatter and
2371          * other protocol offloads. In order to support them some
2372          * functionalities like reorder buffering, PN checking need to be
2373          * done in target. This determines maximum number of peers supported
2374          * by target in offload mode
2375          */
2376         __le32 num_offload_peers;
2377
2378         /* For target-based RX reordering */
2379         __le32 num_offload_reorder_bufs;
2380
2381         /* number of keys per peer */
2382         __le32 num_peer_keys;
2383
2384         /* total number of TX/RX data TIDs */
2385         __le32 num_tids;
2386
2387         /*
2388          * max skid for resolving hash collisions
2389          *
2390          *   The address search table is sparse, so that if two MAC addresses
2391          *   result in the same hash value, the second of these conflicting
2392          *   entries can slide to the next index in the address search table,
2393          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2394          *   specifies the upper bound on how many subsequent indices to search
2395          *   over to find an unoccupied space.
2396          */
2397         __le32 ast_skid_limit;
2398
2399         /*
2400          * the nominal chain mask for transmit
2401          *
2402          *   The chain mask may be modified dynamically, e.g. to operate AP
2403          *   tx with a reduced number of chains if no clients are associated.
2404          *   This configuration parameter specifies the nominal chain-mask that
2405          *   should be used when not operating with a reduced set of tx chains.
2406          */
2407         __le32 tx_chain_mask;
2408
2409         /*
2410          * the nominal chain mask for receive
2411          *
2412          *   The chain mask may be modified dynamically, e.g. for a client
2413          *   to use a reduced number of chains for receive if the traffic to
2414          *   the client is low enough that it doesn't require downlink MIMO
2415          *   or antenna diversity.
2416          *   This configuration parameter specifies the nominal chain-mask that
2417          *   should be used when not operating with a reduced set of rx chains.
2418          */
2419         __le32 rx_chain_mask;
2420
2421         /*
2422          * what rx reorder timeout (ms) to use for the AC
2423          *
2424          *   Each WMM access class (voice, video, best-effort, background) will
2425          *   have its own timeout value to dictate how long to wait for missing
2426          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2427          *   already been received.
2428          *   This parameter specifies the timeout in milliseconds for each
2429          *   class.
2430          */
2431         __le32 rx_timeout_pri_vi;
2432         __le32 rx_timeout_pri_vo;
2433         __le32 rx_timeout_pri_be;
2434         __le32 rx_timeout_pri_bk;
2435
2436         /*
2437          * what mode the rx should decap packets to
2438          *
2439          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2440          *   THis setting also determines the default TX behavior, however TX
2441          *   behavior can be modified on a per VAP basis during VAP init
2442          */
2443         __le32 rx_decap_mode;
2444
2445         /* what is the maximum number of scan requests that can be queued */
2446         __le32 scan_max_pending_reqs;
2447
2448         /* maximum VDEV that could use BMISS offload */
2449         __le32 bmiss_offload_max_vdev;
2450
2451         /* maximum VDEV that could use offload roaming */
2452         __le32 roam_offload_max_vdev;
2453
2454         /* maximum AP profiles that would push to offload roaming */
2455         __le32 roam_offload_max_ap_profiles;
2456
2457         /*
2458          * how many groups to use for mcast->ucast conversion
2459          *
2460          *   The target's WAL maintains a table to hold information regarding
2461          *   which peers belong to a given multicast group, so that if
2462          *   multicast->unicast conversion is enabled, the target can convert
2463          *   multicast tx frames to a series of unicast tx frames, to each
2464          *   peer within the multicast group.
2465              This num_mcast_groups configuration parameter tells the target how
2466          *   many multicast groups to provide storage for within its multicast
2467          *   group membership table.
2468          */
2469         __le32 num_mcast_groups;
2470
2471         /*
2472          * size to alloc for the mcast membership table
2473          *
2474          *   This num_mcast_table_elems configuration parameter tells the
2475          *   target how many peer elements it needs to provide storage for in
2476          *   its multicast group membership table.
2477          *   These multicast group membership table elements are shared by the
2478          *   multicast groups stored within the table.
2479          */
2480         __le32 num_mcast_table_elems;
2481
2482         /*
2483          * whether/how to do multicast->unicast conversion
2484          *
2485          *   This configuration parameter specifies whether the target should
2486          *   perform multicast --> unicast conversion on transmit, and if so,
2487          *   what to do if it finds no entries in its multicast group
2488          *   membership table for the multicast IP address in the tx frame.
2489          *   Configuration value:
2490          *   0 -> Do not perform multicast to unicast conversion.
2491          *   1 -> Convert multicast frames to unicast, if the IP multicast
2492          *        address from the tx frame is found in the multicast group
2493          *        membership table.  If the IP multicast address is not found,
2494          *        drop the frame.
2495          *   2 -> Convert multicast frames to unicast, if the IP multicast
2496          *        address from the tx frame is found in the multicast group
2497          *        membership table.  If the IP multicast address is not found,
2498          *        transmit the frame as multicast.
2499          */
2500         __le32 mcast2ucast_mode;
2501
2502         /*
2503          * how much memory to allocate for a tx PPDU dbg log
2504          *
2505          *   This parameter controls how much memory the target will allocate
2506          *   to store a log of tx PPDU meta-information (how large the PPDU
2507          *   was, when it was sent, whether it was successful, etc.)
2508          */
2509         __le32 tx_dbg_log_size;
2510
2511         /* how many AST entries to be allocated for WDS */
2512         __le32 num_wds_entries;
2513
2514         /*
2515          * MAC DMA burst size, e.g., For target PCI limit can be
2516          * 0 -default, 1 256B
2517          */
2518         __le32 dma_burst_size;
2519
2520         /*
2521          * Fixed delimiters to be inserted after every MPDU to
2522          * account for interface latency to avoid underrun.
2523          */
2524         __le32 mac_aggr_delim;
2525
2526         /*
2527          *   determine whether target is responsible for detecting duplicate
2528          *   non-aggregate MPDU and timing out stale fragments.
2529          *
2530          *   A-MPDU reordering is always performed on the target.
2531          *
2532          *   0: target responsible for frag timeout and dup checking
2533          *   1: host responsible for frag timeout and dup checking
2534          */
2535         __le32 rx_skip_defrag_timeout_dup_detection_check;
2536
2537         /*
2538          * Configuration for VoW :
2539          * No of Video Nodes to be supported
2540          * and Max no of descriptors for each Video link (node).
2541          */
2542         __le32 vow_config;
2543
2544         /* maximum VDEV that could use GTK offload */
2545         __le32 gtk_offload_max_vdev;
2546
2547         /* Number of msdu descriptors target should use */
2548         __le32 num_msdu_desc;
2549
2550         /*
2551          * Max. number of Tx fragments per MSDU
2552          *  This parameter controls the max number of Tx fragments per MSDU.
2553          *  This is sent by the target as part of the WMI_SERVICE_READY event
2554          *  and is overridden by the OS shim as required.
2555          */
2556         __le32 max_frag_entries;
2557 } __packed;
2558
2559 struct wmi_resource_config_10x {
2560         /* number of virtual devices (VAPs) to support */
2561         __le32 num_vdevs;
2562
2563         /* number of peer nodes to support */
2564         __le32 num_peers;
2565
2566         /* number of keys per peer */
2567         __le32 num_peer_keys;
2568
2569         /* total number of TX/RX data TIDs */
2570         __le32 num_tids;
2571
2572         /*
2573          * max skid for resolving hash collisions
2574          *
2575          *   The address search table is sparse, so that if two MAC addresses
2576          *   result in the same hash value, the second of these conflicting
2577          *   entries can slide to the next index in the address search table,
2578          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2579          *   specifies the upper bound on how many subsequent indices to search
2580          *   over to find an unoccupied space.
2581          */
2582         __le32 ast_skid_limit;
2583
2584         /*
2585          * the nominal chain mask for transmit
2586          *
2587          *   The chain mask may be modified dynamically, e.g. to operate AP
2588          *   tx with a reduced number of chains if no clients are associated.
2589          *   This configuration parameter specifies the nominal chain-mask that
2590          *   should be used when not operating with a reduced set of tx chains.
2591          */
2592         __le32 tx_chain_mask;
2593
2594         /*
2595          * the nominal chain mask for receive
2596          *
2597          *   The chain mask may be modified dynamically, e.g. for a client
2598          *   to use a reduced number of chains for receive if the traffic to
2599          *   the client is low enough that it doesn't require downlink MIMO
2600          *   or antenna diversity.
2601          *   This configuration parameter specifies the nominal chain-mask that
2602          *   should be used when not operating with a reduced set of rx chains.
2603          */
2604         __le32 rx_chain_mask;
2605
2606         /*
2607          * what rx reorder timeout (ms) to use for the AC
2608          *
2609          *   Each WMM access class (voice, video, best-effort, background) will
2610          *   have its own timeout value to dictate how long to wait for missing
2611          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2612          *   already been received.
2613          *   This parameter specifies the timeout in milliseconds for each
2614          *   class.
2615          */
2616         __le32 rx_timeout_pri_vi;
2617         __le32 rx_timeout_pri_vo;
2618         __le32 rx_timeout_pri_be;
2619         __le32 rx_timeout_pri_bk;
2620
2621         /*
2622          * what mode the rx should decap packets to
2623          *
2624          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2625          *   THis setting also determines the default TX behavior, however TX
2626          *   behavior can be modified on a per VAP basis during VAP init
2627          */
2628         __le32 rx_decap_mode;
2629
2630         /* what is the maximum number of scan requests that can be queued */
2631         __le32 scan_max_pending_reqs;
2632
2633         /* maximum VDEV that could use BMISS offload */
2634         __le32 bmiss_offload_max_vdev;
2635
2636         /* maximum VDEV that could use offload roaming */
2637         __le32 roam_offload_max_vdev;
2638
2639         /* maximum AP profiles that would push to offload roaming */
2640         __le32 roam_offload_max_ap_profiles;
2641
2642         /*
2643          * how many groups to use for mcast->ucast conversion
2644          *
2645          *   The target's WAL maintains a table to hold information regarding
2646          *   which peers belong to a given multicast group, so that if
2647          *   multicast->unicast conversion is enabled, the target can convert
2648          *   multicast tx frames to a series of unicast tx frames, to each
2649          *   peer within the multicast group.
2650              This num_mcast_groups configuration parameter tells the target how
2651          *   many multicast groups to provide storage for within its multicast
2652          *   group membership table.
2653          */
2654         __le32 num_mcast_groups;
2655
2656         /*
2657          * size to alloc for the mcast membership table
2658          *
2659          *   This num_mcast_table_elems configuration parameter tells the
2660          *   target how many peer elements it needs to provide storage for in
2661          *   its multicast group membership table.
2662          *   These multicast group membership table elements are shared by the
2663          *   multicast groups stored within the table.
2664          */
2665         __le32 num_mcast_table_elems;
2666
2667         /*
2668          * whether/how to do multicast->unicast conversion
2669          *
2670          *   This configuration parameter specifies whether the target should
2671          *   perform multicast --> unicast conversion on transmit, and if so,
2672          *   what to do if it finds no entries in its multicast group
2673          *   membership table for the multicast IP address in the tx frame.
2674          *   Configuration value:
2675          *   0 -> Do not perform multicast to unicast conversion.
2676          *   1 -> Convert multicast frames to unicast, if the IP multicast
2677          *        address from the tx frame is found in the multicast group
2678          *        membership table.  If the IP multicast address is not found,
2679          *        drop the frame.
2680          *   2 -> Convert multicast frames to unicast, if the IP multicast
2681          *        address from the tx frame is found in the multicast group
2682          *        membership table.  If the IP multicast address is not found,
2683          *        transmit the frame as multicast.
2684          */
2685         __le32 mcast2ucast_mode;
2686
2687         /*
2688          * how much memory to allocate for a tx PPDU dbg log
2689          *
2690          *   This parameter controls how much memory the target will allocate
2691          *   to store a log of tx PPDU meta-information (how large the PPDU
2692          *   was, when it was sent, whether it was successful, etc.)
2693          */
2694         __le32 tx_dbg_log_size;
2695
2696         /* how many AST entries to be allocated for WDS */
2697         __le32 num_wds_entries;
2698
2699         /*
2700          * MAC DMA burst size, e.g., For target PCI limit can be
2701          * 0 -default, 1 256B
2702          */
2703         __le32 dma_burst_size;
2704
2705         /*
2706          * Fixed delimiters to be inserted after every MPDU to
2707          * account for interface latency to avoid underrun.
2708          */
2709         __le32 mac_aggr_delim;
2710
2711         /*
2712          *   determine whether target is responsible for detecting duplicate
2713          *   non-aggregate MPDU and timing out stale fragments.
2714          *
2715          *   A-MPDU reordering is always performed on the target.
2716          *
2717          *   0: target responsible for frag timeout and dup checking
2718          *   1: host responsible for frag timeout and dup checking
2719          */
2720         __le32 rx_skip_defrag_timeout_dup_detection_check;
2721
2722         /*
2723          * Configuration for VoW :
2724          * No of Video Nodes to be supported
2725          * and Max no of descriptors for each Video link (node).
2726          */
2727         __le32 vow_config;
2728
2729         /* Number of msdu descriptors target should use */
2730         __le32 num_msdu_desc;
2731
2732         /*
2733          * Max. number of Tx fragments per MSDU
2734          *  This parameter controls the max number of Tx fragments per MSDU.
2735          *  This is sent by the target as part of the WMI_SERVICE_READY event
2736          *  and is overridden by the OS shim as required.
2737          */
2738         __le32 max_frag_entries;
2739 } __packed;
2740
2741 enum wmi_10_2_feature_mask {
2742         WMI_10_2_RX_BATCH_MODE = BIT(0),
2743         WMI_10_2_ATF_CONFIG    = BIT(1),
2744         WMI_10_2_COEX_GPIO     = BIT(3),
2745         WMI_10_2_BSS_CHAN_INFO = BIT(6),
2746         WMI_10_2_PEER_STATS    = BIT(7),
2747 };
2748
2749 struct wmi_resource_config_10_2 {
2750         struct wmi_resource_config_10x common;
2751         __le32 max_peer_ext_stats;
2752         __le32 smart_ant_cap; /* 0-disable, 1-enable */
2753         __le32 bk_min_free;
2754         __le32 be_min_free;
2755         __le32 vi_min_free;
2756         __le32 vo_min_free;
2757         __le32 feature_mask;
2758 } __packed;
2759
2760 #define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
2761 #define NUM_UNITS_IS_NUM_PEERS         BIT(1)
2762 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)
2763
2764 struct wmi_resource_config_10_4 {
2765         /* Number of virtual devices (VAPs) to support */
2766         __le32 num_vdevs;
2767
2768         /* Number of peer nodes to support */
2769         __le32 num_peers;
2770
2771         /* Number of active peer nodes to support */
2772         __le32 num_active_peers;
2773
2774         /* In offload mode, target supports features like WOW, chatter and other
2775          * protocol offloads. In order to support them some functionalities like
2776          * reorder buffering, PN checking need to be done in target.
2777          * This determines maximum number of peers supported by target in
2778          * offload mode.
2779          */
2780         __le32 num_offload_peers;
2781
2782         /* Number of reorder buffers available for doing target based reorder
2783          * Rx reorder buffering
2784          */
2785         __le32 num_offload_reorder_buffs;
2786
2787         /* Number of keys per peer */
2788         __le32 num_peer_keys;
2789
2790         /* Total number of TX/RX data TIDs */
2791         __le32 num_tids;
2792
2793         /* Max skid for resolving hash collisions.
2794          * The address search table is sparse, so that if two MAC addresses
2795          * result in the same hash value, the second of these conflicting
2796          * entries can slide to the next index in the address search table,
2797          * and use it, if it is unoccupied.  This ast_skid_limit parameter
2798          * specifies the upper bound on how many subsequent indices to search
2799          * over to find an unoccupied space.
2800          */
2801         __le32 ast_skid_limit;
2802
2803         /* The nominal chain mask for transmit.
2804          * The chain mask may be modified dynamically, e.g. to operate AP tx
2805          * with a reduced number of chains if no clients are associated.
2806          * This configuration parameter specifies the nominal chain-mask that
2807          * should be used when not operating with a reduced set of tx chains.
2808          */
2809         __le32 tx_chain_mask;
2810
2811         /* The nominal chain mask for receive.
2812          * The chain mask may be modified dynamically, e.g. for a client to use
2813          * a reduced number of chains for receive if the traffic to the client
2814          * is low enough that it doesn't require downlink MIMO or antenna
2815          * diversity. This configuration parameter specifies the nominal
2816          * chain-mask that should be used when not operating with a reduced
2817          * set of rx chains.
2818          */
2819         __le32 rx_chain_mask;
2820
2821         /* What rx reorder timeout (ms) to use for the AC.
2822          * Each WMM access class (voice, video, best-effort, background) will
2823          * have its own timeout value to dictate how long to wait for missing
2824          * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2825          * been received. This parameter specifies the timeout in milliseconds
2826          * for each class.
2827          */
2828         __le32 rx_timeout_pri[4];
2829
2830         /* What mode the rx should decap packets to.
2831          * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2832          * This setting also determines the default TX behavior, however TX
2833          * behavior can be modified on a per VAP basis during VAP init
2834          */
2835         __le32 rx_decap_mode;
2836
2837         __le32 scan_max_pending_req;
2838
2839         __le32 bmiss_offload_max_vdev;
2840
2841         __le32 roam_offload_max_vdev;
2842
2843         __le32 roam_offload_max_ap_profiles;
2844
2845         /* How many groups to use for mcast->ucast conversion.
2846          * The target's WAL maintains a table to hold information regarding
2847          * which peers belong to a given multicast group, so that if
2848          * multicast->unicast conversion is enabled, the target can convert
2849          * multicast tx frames to a series of unicast tx frames, to each peer
2850          * within the multicast group. This num_mcast_groups configuration
2851          * parameter tells the target how many multicast groups to provide
2852          * storage for within its multicast group membership table.
2853          */
2854         __le32 num_mcast_groups;
2855
2856         /* Size to alloc for the mcast membership table.
2857          * This num_mcast_table_elems configuration parameter tells the target
2858          * how many peer elements it needs to provide storage for in its
2859          * multicast group membership table. These multicast group membership
2860          * table elements are shared by the multicast groups stored within
2861          * the table.
2862          */
2863         __le32 num_mcast_table_elems;
2864
2865         /* Whether/how to do multicast->unicast conversion.
2866          * This configuration parameter specifies whether the target should
2867          * perform multicast --> unicast conversion on transmit, and if so,
2868          * what to do if it finds no entries in its multicast group membership
2869          * table for the multicast IP address in the tx frame.
2870          * Configuration value:
2871          * 0 -> Do not perform multicast to unicast conversion.
2872          * 1 -> Convert multicast frames to unicast, if the IP multicast address
2873          *      from the tx frame is found in the multicast group membership
2874          *      table.  If the IP multicast address is not found, drop the frame
2875          * 2 -> Convert multicast frames to unicast, if the IP multicast address
2876          *      from the tx frame is found in the multicast group membership
2877          *      table.  If the IP multicast address is not found, transmit the
2878          *      frame as multicast.
2879          */
2880         __le32 mcast2ucast_mode;
2881
2882         /* How much memory to allocate for a tx PPDU dbg log.
2883          * This parameter controls how much memory the target will allocate to
2884          * store a log of tx PPDU meta-information (how large the PPDU was,
2885          * when it was sent, whether it was successful, etc.)
2886          */
2887         __le32 tx_dbg_log_size;
2888
2889         /* How many AST entries to be allocated for WDS */
2890         __le32 num_wds_entries;
2891
2892         /* MAC DMA burst size. 0 -default, 1 -256B */
2893         __le32 dma_burst_size;
2894
2895         /* Fixed delimiters to be inserted after every MPDU to account for
2896          * interface latency to avoid underrun.
2897          */
2898         __le32 mac_aggr_delim;
2899
2900         /* Determine whether target is responsible for detecting duplicate
2901          * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2902          * is always performed on the target.
2903          *
2904          * 0: target responsible for frag timeout and dup checking
2905          * 1: host responsible for frag timeout and dup checking
2906          */
2907         __le32 rx_skip_defrag_timeout_dup_detection_check;
2908
2909         /* Configuration for VoW : No of Video nodes to be supported and max
2910          * no of descriptors for each video link (node).
2911          */
2912         __le32 vow_config;
2913
2914         /* Maximum vdev that could use gtk offload */
2915         __le32 gtk_offload_max_vdev;
2916
2917         /* Number of msdu descriptors target should use */
2918         __le32 num_msdu_desc;
2919
2920         /* Max number of tx fragments per MSDU.
2921          * This parameter controls the max number of tx fragments per MSDU.
2922          * This will passed by target as part of the WMI_SERVICE_READY event
2923          * and is overridden by the OS shim as required.
2924          */
2925         __le32 max_frag_entries;
2926
2927         /* Max number of extended peer stats.
2928          * This parameter controls the max number of peers for which extended
2929          * statistics are supported by target
2930          */
2931         __le32 max_peer_ext_stats;
2932
2933         /* Smart antenna capabilities information.
2934          * 1 - Smart antenna is enabled
2935          * 0 - Smart antenna is disabled
2936          * In future this can contain smart antenna specific capabilities.
2937          */
2938         __le32 smart_ant_cap;
2939
2940         /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2941          * during init.
2942          */
2943         __le32 bk_minfree;
2944         __le32 be_minfree;
2945         __le32 vi_minfree;
2946         __le32 vo_minfree;
2947
2948         /* Rx batch mode capability.
2949          * 1 - Rx batch mode enabled
2950          * 0 - Rx batch mode disabled
2951          */
2952         __le32 rx_batchmode;
2953
2954         /* Thermal throttling capability.
2955          * 1 - Capable of thermal throttling
2956          * 0 - Not capable of thermal throttling
2957          */
2958         __le32 tt_support;
2959
2960         /* ATF configuration.
2961          * 1  - Enable ATF
2962          * 0  - Disable ATF
2963          */
2964         __le32 atf_config;
2965
2966         /* Configure padding to manage IP header un-alignment
2967          * 1  - Enable padding
2968          * 0  - Disable padding
2969          */
2970         __le32 iphdr_pad_config;
2971
2972         /* qwrap configuration (bits 15-0)
2973          * 1  - This is qwrap configuration
2974          * 0  - This is not qwrap
2975          *
2976          * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2977          * In order to get ack-RSSI reporting and to specify the tx-rate for
2978          * individual frames, this option must be enabled.  This uses an extra
2979          * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2980          */
2981         __le32 qwrap_config;
2982 } __packed;
2983
2984 enum wmi_coex_version {
2985         WMI_NO_COEX_VERSION_SUPPORT     = 0,
2986         /* 3 wire coex support*/
2987         WMI_COEX_VERSION_1              = 1,
2988         /* 2.5 wire coex support*/
2989         WMI_COEX_VERSION_2              = 2,
2990         /* 2.5 wire coex with duty cycle support */
2991         WMI_COEX_VERSION_3              = 3,
2992         /* 4 wire coex support*/
2993         WMI_COEX_VERSION_4              = 4,
2994 };
2995
2996 /**
2997  * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2998  * @WMI_10_4_LTEU_SUPPORT: LTEU config
2999  * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
3000  * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
3001  * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
3002  * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
3003  * @WMI_10_4_PEER_STATS: Per station stats
3004  * @WMI_10_4_VDEV_STATS: Per vdev stats
3005  * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3006  * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3007  * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3008  * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3009  * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3010  *      enable/disable
3011  * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY: Explicit TDLS mode enable/disable
3012  * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3013  * @WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT:  Firmware supports Extended Peer
3014  *      TID configuration for QoS related settings
3015  * @WMI_10_4_REPORT_AIRTIME: Firmware supports transmit airtime reporting
3016  */
3017 enum wmi_10_4_feature_mask {
3018         WMI_10_4_LTEU_SUPPORT                   = BIT(0),
3019         WMI_10_4_COEX_GPIO_SUPPORT              = BIT(1),
3020         WMI_10_4_AUX_RADIO_SPECTRAL_INTF        = BIT(2),
3021         WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF       = BIT(3),
3022         WMI_10_4_BSS_CHANNEL_INFO_64            = BIT(4),
3023         WMI_10_4_PEER_STATS                     = BIT(5),
3024         WMI_10_4_VDEV_STATS                     = BIT(6),
3025         WMI_10_4_TDLS                           = BIT(7),
3026         WMI_10_4_TDLS_OFFCHAN                   = BIT(8),
3027         WMI_10_4_TDLS_UAPSD_BUFFER_STA          = BIT(9),
3028         WMI_10_4_TDLS_UAPSD_SLEEP_STA           = BIT(10),
3029         WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3030         WMI_10_4_TDLS_EXPLICIT_MODE_ONLY        = BIT(12),
3031         WMI_10_4_TX_DATA_ACK_RSSI               = BIT(16),
3032         WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT   = BIT(17),
3033         WMI_10_4_REPORT_AIRTIME                 = BIT(18),
3034
3035 };
3036
3037 struct wmi_ext_resource_config_10_4_cmd {
3038         /* contains enum wmi_host_platform_type */
3039         __le32 host_platform_config;
3040         /* see enum wmi_10_4_feature_mask */
3041         __le32 fw_feature_bitmap;
3042         /* WLAN priority GPIO number */
3043         __le32 wlan_gpio_priority;
3044         /* see enum wmi_coex_version */
3045         __le32 coex_version;
3046         /* COEX GPIO config */
3047         __le32 coex_gpio_pin1;
3048         __le32 coex_gpio_pin2;
3049         __le32 coex_gpio_pin3;
3050         /* number of vdevs allowed to perform tdls */
3051         __le32 num_tdls_vdevs;
3052         /* number of peers to track per TDLS vdev */
3053         __le32 num_tdls_conn_table_entries;
3054         /* number of tdls sleep sta supported */
3055         __le32 max_tdls_concurrent_sleep_sta;
3056         /* number of tdls buffer sta supported */
3057         __le32 max_tdls_concurrent_buffer_sta;
3058 };
3059
3060 /* structure describing host memory chunk. */
3061 struct host_memory_chunk {
3062         /* id of the request that is passed up in service ready */
3063         __le32 req_id;
3064         /* the physical address the memory chunk */
3065         __le32 ptr;
3066         /* size of the chunk */
3067         __le32 size;
3068 } __packed;
3069
3070 #define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3071
3072 struct wmi_host_mem_chunks {
3073         __le32 count;
3074         /* some fw revisions require at least 1 chunk regardless of count */
3075         union {
3076                 struct host_memory_chunk item;
3077                 DECLARE_FLEX_ARRAY(struct host_memory_chunk, items);
3078         };
3079 } __packed;
3080
3081 struct wmi_init_cmd {
3082         struct wmi_resource_config resource_config;
3083         struct wmi_host_mem_chunks mem_chunks;
3084 } __packed;
3085
3086 /* _10x structure is from 10.X FW API */
3087 struct wmi_init_cmd_10x {
3088         struct wmi_resource_config_10x resource_config;
3089         struct wmi_host_mem_chunks mem_chunks;
3090 } __packed;
3091
3092 struct wmi_init_cmd_10_2 {
3093         struct wmi_resource_config_10_2 resource_config;
3094         struct wmi_host_mem_chunks mem_chunks;
3095 } __packed;
3096
3097 struct wmi_init_cmd_10_4 {
3098         struct wmi_resource_config_10_4 resource_config;
3099         struct wmi_host_mem_chunks mem_chunks;
3100 } __packed;
3101
3102 struct wmi_chan_list_entry {
3103         __le16 freq;
3104         u8 phy_mode; /* valid for 10.2 only */
3105         u8 reserved;
3106 } __packed;
3107
3108 /* TLV for channel list */
3109 struct wmi_chan_list {
3110         __le32 tag; /* WMI_CHAN_LIST_TAG */
3111         __le32 num_chan;
3112         struct wmi_chan_list_entry channel_list[];
3113 } __packed;
3114
3115 struct wmi_bssid_list {
3116         __le32 tag; /* WMI_BSSID_LIST_TAG */
3117         __le32 num_bssid;
3118         struct wmi_mac_addr bssid_list[];
3119 } __packed;
3120
3121 struct wmi_ie_data {
3122         __le32 tag; /* WMI_IE_TAG */
3123         __le32 ie_len;
3124         u8 ie_data[];
3125 } __packed;
3126
3127 struct wmi_ssid {
3128         __le32 ssid_len;
3129         u8 ssid[32];
3130 } __packed;
3131
3132 struct wmi_ssid_list {
3133         __le32 tag; /* WMI_SSID_LIST_TAG */
3134         __le32 num_ssids;
3135         struct wmi_ssid ssids[];
3136 } __packed;
3137
3138 /* prefix used by scan requestor ids on the host */
3139 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3140
3141 /* prefix used by scan request ids generated on the host */
3142 /* host cycles through the lower 12 bits to generate ids */
3143 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3144
3145 #define WLAN_SCAN_PARAMS_MAX_SSID    16
3146 #define WLAN_SCAN_PARAMS_MAX_BSSID   4
3147 #define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
3148
3149 /* Values lower than this may be refused by some firmware revisions with a scan
3150  * completion with a timedout reason.
3151  */
3152 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3153
3154 /* Scan priority numbers must be sequential, starting with 0 */
3155 enum wmi_scan_priority {
3156         WMI_SCAN_PRIORITY_VERY_LOW = 0,
3157         WMI_SCAN_PRIORITY_LOW,
3158         WMI_SCAN_PRIORITY_MEDIUM,
3159         WMI_SCAN_PRIORITY_HIGH,
3160         WMI_SCAN_PRIORITY_VERY_HIGH,
3161         WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
3162 };
3163
3164 struct wmi_start_scan_common {
3165         /* Scan ID */
3166         __le32 scan_id;
3167         /* Scan requestor ID */
3168         __le32 scan_req_id;
3169         /* VDEV id(interface) that is requesting scan */
3170         __le32 vdev_id;
3171         /* Scan Priority, input to scan scheduler */
3172         __le32 scan_priority;
3173         /* Scan events subscription */
3174         __le32 notify_scan_events;
3175         /* dwell time in msec on active channels */
3176         __le32 dwell_time_active;
3177         /* dwell time in msec on passive channels */
3178         __le32 dwell_time_passive;
3179         /*
3180          * min time in msec on the BSS channel,only valid if at least one
3181          * VDEV is active
3182          */
3183         __le32 min_rest_time;
3184         /*
3185          * max rest time in msec on the BSS channel,only valid if at least
3186          * one VDEV is active
3187          */
3188         /*
3189          * the scanner will rest on the bss channel at least min_rest_time
3190          * after min_rest_time the scanner will start checking for tx/rx
3191          * activity on all VDEVs. if there is no activity the scanner will
3192          * switch to off channel. if there is activity the scanner will let
3193          * the radio on the bss channel until max_rest_time expires.at
3194          * max_rest_time scanner will switch to off channel irrespective of
3195          * activity. activity is determined by the idle_time parameter.
3196          */
3197         __le32 max_rest_time;
3198         /*
3199          * time before sending next set of probe requests.
3200          * The scanner keeps repeating probe requests transmission with
3201          * period specified by repeat_probe_time.
3202          * The number of probe requests specified depends on the ssid_list
3203          * and bssid_list
3204          */
3205         __le32 repeat_probe_time;
3206         /* time in msec between 2 consecutive probe requests with in a set. */
3207         __le32 probe_spacing_time;
3208         /*
3209          * data inactivity time in msec on bss channel that will be used by
3210          * scanner for measuring the inactivity.
3211          */
3212         __le32 idle_time;
3213         /* maximum time in msec allowed for scan  */
3214         __le32 max_scan_time;
3215         /*
3216          * delay in msec before sending first probe request after switching
3217          * to a channel
3218          */
3219         __le32 probe_delay;
3220         /* Scan control flags */
3221         __le32 scan_ctrl_flags;
3222 } __packed;
3223
3224 struct wmi_start_scan_cmd {
3225         struct wmi_start_scan_common common;
3226         __le32 burst_duration_ms;
3227         u8 tlvs[];
3228 } __packed;
3229
3230 /* This is the definition from 10.X firmware branch */
3231 struct wmi_10x_start_scan_cmd {
3232         struct wmi_start_scan_common common;
3233         u8 tlvs[];
3234 } __packed;
3235
3236 struct wmi_ssid_arg {
3237         int len;
3238         const u8 *ssid;
3239 };
3240
3241 struct wmi_bssid_arg {
3242         const u8 *bssid;
3243 };
3244
3245 struct wmi_start_scan_arg {
3246         u32 scan_id;
3247         u32 scan_req_id;
3248         u32 vdev_id;
3249         u32 scan_priority;
3250         u32 notify_scan_events;
3251         u32 dwell_time_active;
3252         u32 dwell_time_passive;
3253         u32 min_rest_time;
3254         u32 max_rest_time;
3255         u32 repeat_probe_time;
3256         u32 probe_spacing_time;
3257         u32 idle_time;
3258         u32 max_scan_time;
3259         u32 probe_delay;
3260         u32 scan_ctrl_flags;
3261         u32 burst_duration_ms;
3262
3263         u32 ie_len;
3264         u32 n_channels;
3265         u32 n_ssids;
3266         u32 n_bssids;
3267
3268         u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3269         u16 channels[64];
3270         struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3271         struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3272         struct wmi_mac_addr mac_addr;
3273         struct wmi_mac_addr mac_mask;
3274 };
3275
3276 /* scan control flags */
3277
3278 /* passively scan all channels including active channels */
3279 #define WMI_SCAN_FLAG_PASSIVE        0x1
3280 /* add wild card ssid probe request even though ssid_list is specified. */
3281 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3282 /* add cck rates to rates/xrate ie for the generated probe request */
3283 #define WMI_SCAN_ADD_CCK_RATES 0x4
3284 /* add ofdm rates to rates/xrate ie for the generated probe request */
3285 #define WMI_SCAN_ADD_OFDM_RATES 0x8
3286 /* To enable indication of Chan load and Noise floor to host */
3287 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
3288 /* Filter Probe request frames  */
3289 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
3290 /* When set, DFS channels will not be scanned */
3291 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
3292 /* Different FW scan engine may choose to bail out on errors.
3293  * Allow the driver to have influence over that.
3294  */
3295 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3296
3297 /* Use random MAC address for TA for Probe Request frame and add
3298  * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3299  * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3300  */
3301 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x1000
3302
3303 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3304 #define WMI_SCAN_CLASS_MASK 0xFF000000
3305
3306 enum wmi_stop_scan_type {
3307         WMI_SCAN_STOP_ONE       = 0x00000000, /* stop by scan_id */
3308         WMI_SCAN_STOP_VDEV_ALL  = 0x01000000, /* stop by vdev_id */
3309         WMI_SCAN_STOP_ALL       = 0x04000000, /* stop all scans */
3310 };
3311
3312 struct wmi_stop_scan_cmd {
3313         __le32 scan_req_id;
3314         __le32 scan_id;
3315         __le32 req_type;
3316         __le32 vdev_id;
3317 } __packed;
3318
3319 struct wmi_stop_scan_arg {
3320         u32 req_id;
3321         enum wmi_stop_scan_type req_type;
3322         union {
3323                 u32 scan_id;
3324                 u32 vdev_id;
3325         } u;
3326 };
3327
3328 struct wmi_scan_chan_list_cmd {
3329         __le32 num_scan_chans;
3330         struct wmi_channel chan_info[];
3331 } __packed;
3332
3333 struct wmi_scan_chan_list_arg {
3334         u32 n_channels;
3335         struct wmi_channel_arg *channels;
3336 };
3337
3338 enum wmi_bss_filter {
3339         WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
3340         WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
3341         WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
3342         WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3343         WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
3344         WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
3345         WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
3346         WMI_BSS_FILTER_LAST_BSS,        /* marker only */
3347 };
3348
3349 enum wmi_scan_event_type {
3350         WMI_SCAN_EVENT_STARTED              = BIT(0),
3351         WMI_SCAN_EVENT_COMPLETED            = BIT(1),
3352         WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
3353         WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
3354         WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
3355         /* possibly by high-prio scan */
3356         WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
3357         WMI_SCAN_EVENT_START_FAILED         = BIT(6),
3358         WMI_SCAN_EVENT_RESTARTED            = BIT(7),
3359         WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3360         WMI_SCAN_EVENT_MAX                  = BIT(15),
3361 };
3362
3363 enum wmi_scan_completion_reason {
3364         WMI_SCAN_REASON_COMPLETED,
3365         WMI_SCAN_REASON_CANCELLED,
3366         WMI_SCAN_REASON_PREEMPTED,
3367         WMI_SCAN_REASON_TIMEDOUT,
3368         WMI_SCAN_REASON_INTERNAL_FAILURE,
3369         WMI_SCAN_REASON_MAX,
3370 };
3371
3372 struct wmi_scan_event {
3373         __le32 event_type; /* %WMI_SCAN_EVENT_ */
3374         __le32 reason; /* %WMI_SCAN_REASON_ */
3375         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3376         __le32 scan_req_id;
3377         __le32 scan_id;
3378         __le32 vdev_id;
3379 } __packed;
3380
3381 /*
3382  * This defines how much headroom is kept in the
3383  * receive frame between the descriptor and the
3384  * payload, in order for the WMI PHY error and
3385  * management handler to insert header contents.
3386  *
3387  * This is in bytes.
3388  */
3389 #define WMI_MGMT_RX_HDR_HEADROOM    52
3390
3391 /*
3392  * This event will be used for sending scan results
3393  * as well as rx mgmt frames to the host. The rx buffer
3394  * will be sent as part of this WMI event. It would be a
3395  * good idea to pass all the fields in the RX status
3396  * descriptor up to the host.
3397  */
3398 struct wmi_mgmt_rx_hdr_v1 {
3399         __le32 channel;
3400         __le32 snr;
3401         __le32 rate;
3402         __le32 phy_mode;
3403         __le32 buf_len;
3404         __le32 status; /* %WMI_RX_STATUS_ */
3405 } __packed;
3406
3407 struct wmi_mgmt_rx_hdr_v2 {
3408         struct wmi_mgmt_rx_hdr_v1 v1;
3409         __le32 rssi_ctl[4];
3410 } __packed;
3411
3412 struct wmi_mgmt_rx_event_v1 {
3413         struct wmi_mgmt_rx_hdr_v1 hdr;
3414         u8 buf[];
3415 } __packed;
3416
3417 struct wmi_mgmt_rx_event_v2 {
3418         struct wmi_mgmt_rx_hdr_v2 hdr;
3419         u8 buf[];
3420 } __packed;
3421
3422 struct wmi_10_4_mgmt_rx_hdr {
3423         __le32 channel;
3424         __le32 snr;
3425             u8 rssi_ctl[4];
3426         __le32 rate;
3427         __le32 phy_mode;
3428         __le32 buf_len;
3429         __le32 status;
3430 } __packed;
3431
3432 struct wmi_10_4_mgmt_rx_event {
3433         struct wmi_10_4_mgmt_rx_hdr hdr;
3434         u8 buf[];
3435 } __packed;
3436
3437 struct wmi_mgmt_rx_ext_info {
3438         __le64 rx_mac_timestamp;
3439 } __packed __aligned(4);
3440
3441 #define WMI_RX_STATUS_OK                        0x00
3442 #define WMI_RX_STATUS_ERR_CRC                   0x01
3443 #define WMI_RX_STATUS_ERR_DECRYPT               0x08
3444 #define WMI_RX_STATUS_ERR_MIC                   0x10
3445 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS        0x20
3446 /* Extension data at the end of mgmt frame */
3447 #define WMI_RX_STATUS_EXT_INFO          0x40
3448
3449 #define PHY_ERROR_GEN_SPECTRAL_SCAN             0x26
3450 #define PHY_ERROR_GEN_FALSE_RADAR_EXT           0x24
3451 #define PHY_ERROR_GEN_RADAR                     0x05
3452
3453 #define PHY_ERROR_10_4_RADAR_MASK               0x4
3454 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000
3455
3456 enum phy_err_type {
3457         PHY_ERROR_UNKNOWN,
3458         PHY_ERROR_SPECTRAL_SCAN,
3459         PHY_ERROR_FALSE_RADAR_EXT,
3460         PHY_ERROR_RADAR
3461 };
3462
3463 struct wmi_phyerr {
3464         __le32 tsf_timestamp;
3465         __le16 freq1;
3466         __le16 freq2;
3467         u8 rssi_combined;
3468         u8 chan_width_mhz;
3469         u8 phy_err_code;
3470         u8 rsvd0;
3471         __le32 rssi_chains[4];
3472         __le16 nf_chains[4];
3473         __le32 buf_len;
3474         u8 buf[];
3475 } __packed;
3476
3477 struct wmi_phyerr_event {
3478         __le32 num_phyerrs;
3479         __le32 tsf_l32;
3480         __le32 tsf_u32;
3481
3482         /* array of struct wmi_phyerr */
3483         u8 phyerrs[];
3484 } __packed;
3485
3486 struct wmi_10_4_phyerr_event {
3487         __le32 tsf_l32;
3488         __le32 tsf_u32;
3489         __le16 freq1;
3490         __le16 freq2;
3491         u8 rssi_combined;
3492         u8 chan_width_mhz;
3493         u8 phy_err_code;
3494         u8 rsvd0;
3495         __le32 rssi_chains[4];
3496         __le16 nf_chains[4];
3497         __le32 phy_err_mask[2];
3498         __le32 tsf_timestamp;
3499         __le32 buf_len;
3500         u8 buf[];
3501 } __packed;
3502
3503 struct wmi_radar_found_info {
3504         __le32 pri_min;
3505         __le32 pri_max;
3506         __le32 width_min;
3507         __le32 width_max;
3508         __le32 sidx_min;
3509         __le32 sidx_max;
3510 } __packed;
3511
3512 enum wmi_radar_confirmation_status {
3513         /* Detected radar was due to SW pulses */
3514         WMI_SW_RADAR_DETECTED    = 0,
3515
3516         WMI_RADAR_DETECTION_FAIL = 1,
3517
3518         /* Real radar detected */
3519         WMI_HW_RADAR_DETECTED    = 2,
3520 };
3521
3522 #define PHYERR_TLV_SIG                          0xBB
3523 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT        0xFB
3524 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY      0xF8
3525 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT  0xF9
3526
3527 struct phyerr_radar_report {
3528         __le32 reg0; /* RADAR_REPORT_REG0_* */
3529         __le32 reg1; /* RADAR_REPORT_REG1_* */
3530 } __packed;
3531
3532 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK           0x80000000
3533 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB            31
3534
3535 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK       0x40000000
3536 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB        30
3537
3538 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK           0x3FF00000
3539 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB            20
3540
3541 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK         0x000F0000
3542 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB          16
3543
3544 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK         0x0000FC00
3545 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB          10
3546
3547 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK               0x000003FF
3548 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB                0
3549
3550 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK     0x80000000
3551 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB      31
3552
3553 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK        0x7F000000
3554 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB         24
3555
3556 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK       0x00FF0000
3557 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB        16
3558
3559 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK         0x0000FF00
3560 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB          8
3561
3562 #define RADAR_REPORT_REG1_PULSE_DUR_MASK                0x000000FF
3563 #define RADAR_REPORT_REG1_PULSE_DUR_LSB                 0
3564
3565 struct phyerr_fft_report {
3566         __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3567         __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3568 } __packed;
3569
3570 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK       0xFF800000
3571 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB        23
3572
3573 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK         0x007FC000
3574 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB          14
3575
3576 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK         0x00003000
3577 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB          12
3578
3579 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK           0x00000FFF
3580 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB            0
3581
3582 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK           0xFC000000
3583 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB            26
3584
3585 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK           0x03FC0000
3586 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB            18
3587
3588 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK            0x0003FF00
3589 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB             8
3590
3591 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK     0x000000FF
3592 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB      0
3593
3594 struct phyerr_tlv {
3595         __le16 len;
3596         u8 tag;
3597         u8 sig;
3598 } __packed;
3599
3600 #define DFS_RSSI_POSSIBLY_FALSE                 50
3601 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE       40
3602
3603 struct wmi_mgmt_tx_hdr {
3604         __le32 vdev_id;
3605         struct wmi_mac_addr peer_macaddr;
3606         __le32 tx_rate;
3607         __le32 tx_power;
3608         __le32 buf_len;
3609 } __packed;
3610
3611 struct wmi_mgmt_tx_cmd {
3612         struct wmi_mgmt_tx_hdr hdr;
3613         u8 buf[];
3614 } __packed;
3615
3616 struct wmi_echo_event {
3617         __le32 value;
3618 } __packed;
3619
3620 struct wmi_echo_cmd {
3621         __le32 value;
3622 } __packed;
3623
3624 struct wmi_pdev_set_regdomain_cmd {
3625         __le32 reg_domain;
3626         __le32 reg_domain_2G;
3627         __le32 reg_domain_5G;
3628         __le32 conformance_test_limit_2G;
3629         __le32 conformance_test_limit_5G;
3630 } __packed;
3631
3632 enum wmi_dfs_region {
3633         /* Uninitialized dfs domain */
3634         WMI_UNINIT_DFS_DOMAIN = 0,
3635
3636         /* FCC3 dfs domain */
3637         WMI_FCC_DFS_DOMAIN = 1,
3638
3639         /* ETSI dfs domain */
3640         WMI_ETSI_DFS_DOMAIN = 2,
3641
3642         /*Japan dfs domain */
3643         WMI_MKK4_DFS_DOMAIN = 3,
3644 };
3645
3646 struct wmi_pdev_set_regdomain_cmd_10x {
3647         __le32 reg_domain;
3648         __le32 reg_domain_2G;
3649         __le32 reg_domain_5G;
3650         __le32 conformance_test_limit_2G;
3651         __le32 conformance_test_limit_5G;
3652
3653         /* dfs domain from wmi_dfs_region */
3654         __le32 dfs_domain;
3655 } __packed;
3656
3657 /* Command to set/unset chip in quiet mode */
3658 struct wmi_pdev_set_quiet_cmd {
3659         /* period in TUs */
3660         __le32 period;
3661
3662         /* duration in TUs */
3663         __le32 duration;
3664
3665         /* offset in TUs */
3666         __le32 next_start;
3667
3668         /* enable/disable */
3669         __le32 enabled;
3670 } __packed;
3671
3672 /*
3673  * 802.11g protection mode.
3674  */
3675 enum ath10k_protmode {
3676         ATH10K_PROT_NONE     = 0,    /* no protection */
3677         ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
3678         ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
3679 };
3680
3681 enum wmi_rtscts_profile {
3682         WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3683         WMI_RTSCTS_FOR_SECOND_RATESERIES,
3684         WMI_RTSCTS_ACROSS_SW_RETRIES
3685 };
3686
3687 #define WMI_RTSCTS_ENABLED              1
3688 #define WMI_RTSCTS_SET_MASK             0x0f
3689 #define WMI_RTSCTS_SET_LSB              0
3690
3691 #define WMI_RTSCTS_PROFILE_MASK         0xf0
3692 #define WMI_RTSCTS_PROFILE_LSB          4
3693
3694 enum wmi_beacon_gen_mode {
3695         WMI_BEACON_STAGGERED_MODE = 0,
3696         WMI_BEACON_BURST_MODE = 1
3697 };
3698
3699 enum wmi_csa_event_ies_present_flag {
3700         WMI_CSA_IE_PRESENT = 0x00000001,
3701         WMI_XCSA_IE_PRESENT = 0x00000002,
3702         WMI_WBW_IE_PRESENT = 0x00000004,
3703         WMI_CSWARP_IE_PRESENT = 0x00000008,
3704 };
3705
3706 /* wmi CSA receive event from beacon frame */
3707 struct wmi_csa_event {
3708         __le32 i_fc_dur;
3709         /* Bit 0-15: FC */
3710         /* Bit 16-31: DUR */
3711         struct wmi_mac_addr i_addr1;
3712         struct wmi_mac_addr i_addr2;
3713         __le32 csa_ie[2];
3714         __le32 xcsa_ie[2];
3715         __le32 wb_ie[2];
3716         __le32 cswarp_ie;
3717         __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3718 } __packed;
3719
3720 /* the definition of different PDEV parameters */
3721 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3722 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3723 #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
3724
3725 struct wmi_pdev_param_map {
3726         u32 tx_chain_mask;
3727         u32 rx_chain_mask;
3728         u32 txpower_limit2g;
3729         u32 txpower_limit5g;
3730         u32 txpower_scale;
3731         u32 beacon_gen_mode;
3732         u32 beacon_tx_mode;
3733         u32 resmgr_offchan_mode;
3734         u32 protection_mode;
3735         u32 dynamic_bw;
3736         u32 non_agg_sw_retry_th;
3737         u32 agg_sw_retry_th;
3738         u32 sta_kickout_th;
3739         u32 ac_aggrsize_scaling;
3740         u32 ltr_enable;
3741         u32 ltr_ac_latency_be;
3742         u32 ltr_ac_latency_bk;
3743         u32 ltr_ac_latency_vi;
3744         u32 ltr_ac_latency_vo;
3745         u32 ltr_ac_latency_timeout;
3746         u32 ltr_sleep_override;
3747         u32 ltr_rx_override;
3748         u32 ltr_tx_activity_timeout;
3749         u32 l1ss_enable;
3750         u32 dsleep_enable;
3751         u32 pcielp_txbuf_flush;
3752         u32 pcielp_txbuf_watermark;
3753         u32 pcielp_txbuf_tmo_en;
3754         u32 pcielp_txbuf_tmo_value;
3755         u32 pdev_stats_update_period;
3756         u32 vdev_stats_update_period;
3757         u32 peer_stats_update_period;
3758         u32 bcnflt_stats_update_period;
3759         u32 pmf_qos;
3760         u32 arp_ac_override;
3761         u32 dcs;
3762         u32 ani_enable;
3763         u32 ani_poll_period;
3764         u32 ani_listen_period;
3765         u32 ani_ofdm_level;
3766         u32 ani_cck_level;
3767         u32 dyntxchain;
3768         u32 proxy_sta;
3769         u32 idle_ps_config;
3770         u32 power_gating_sleep;
3771         u32 fast_channel_reset;
3772         u32 burst_dur;
3773         u32 burst_enable;
3774         u32 cal_period;
3775         u32 aggr_burst;
3776         u32 rx_decap_mode;
3777         u32 smart_antenna_default_antenna;
3778         u32 igmpmld_override;
3779         u32 igmpmld_tid;
3780         u32 antenna_gain;
3781         u32 rx_filter;
3782         u32 set_mcast_to_ucast_tid;
3783         u32 proxy_sta_mode;
3784         u32 set_mcast2ucast_mode;
3785         u32 set_mcast2ucast_buffer;
3786         u32 remove_mcast2ucast_buffer;
3787         u32 peer_sta_ps_statechg_enable;
3788         u32 igmpmld_ac_override;
3789         u32 block_interbss;
3790         u32 set_disable_reset_cmdid;
3791         u32 set_msdu_ttl_cmdid;
3792         u32 set_ppdu_duration_cmdid;
3793         u32 txbf_sound_period_cmdid;
3794         u32 set_promisc_mode_cmdid;
3795         u32 set_burst_mode_cmdid;
3796         u32 en_stats;
3797         u32 mu_group_policy;
3798         u32 noise_detection;
3799         u32 noise_threshold;
3800         u32 dpd_enable;
3801         u32 set_mcast_bcast_echo;
3802         u32 atf_strict_sch;
3803         u32 atf_sched_duration;
3804         u32 ant_plzn;
3805         u32 mgmt_retry_limit;
3806         u32 sensitivity_level;
3807         u32 signed_txpower_2g;
3808         u32 signed_txpower_5g;
3809         u32 enable_per_tid_amsdu;
3810         u32 enable_per_tid_ampdu;
3811         u32 cca_threshold;
3812         u32 rts_fixed_rate;
3813         u32 pdev_reset;
3814         u32 wapi_mbssid_offset;
3815         u32 arp_srcaddr;
3816         u32 arp_dstaddr;
3817         u32 enable_btcoex;
3818         u32 rfkill_config;
3819         u32 rfkill_enable;
3820         u32 peer_stats_info_enable;
3821 };
3822
3823 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3824
3825 enum wmi_pdev_param {
3826         /* TX chain mask */
3827         WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3828         /* RX chain mask */
3829         WMI_PDEV_PARAM_RX_CHAIN_MASK,
3830         /* TX power limit for 2G Radio */
3831         WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3832         /* TX power limit for 5G Radio */
3833         WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3834         /* TX power scale */
3835         WMI_PDEV_PARAM_TXPOWER_SCALE,
3836         /* Beacon generation mode . 0: host, 1: target   */
3837         WMI_PDEV_PARAM_BEACON_GEN_MODE,
3838         /* Beacon generation mode . 0: staggered 1: bursted   */
3839         WMI_PDEV_PARAM_BEACON_TX_MODE,
3840         /*
3841          * Resource manager off chan mode .
3842          * 0: turn off offchan mode. 1: turn on offchan mode
3843          */
3844         WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3845         /*
3846          * Protection mode:
3847          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3848          */
3849         WMI_PDEV_PARAM_PROTECTION_MODE,
3850         /*
3851          * Dynamic bandwidth - 0: disable, 1: enable
3852          *
3853          * When enabled HW rate control tries different bandwidths when
3854          * retransmitting frames.
3855          */
3856         WMI_PDEV_PARAM_DYNAMIC_BW,
3857         /* Non aggregate/ 11g sw retry threshold.0-disable */
3858         WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3859         /* aggregate sw retry threshold. 0-disable*/
3860         WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3861         /* Station kickout threshold (non of consecutive failures).0-disable */
3862         WMI_PDEV_PARAM_STA_KICKOUT_TH,
3863         /* Aggerate size scaling configuration per AC */
3864         WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3865         /* LTR enable */
3866         WMI_PDEV_PARAM_LTR_ENABLE,
3867         /* LTR latency for BE, in us */
3868         WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3869         /* LTR latency for BK, in us */
3870         WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3871         /* LTR latency for VI, in us */
3872         WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3873         /* LTR latency for VO, in us  */
3874         WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3875         /* LTR AC latency timeout, in ms */
3876         WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3877         /* LTR platform latency override, in us */
3878         WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3879         /* LTR-RX override, in us */
3880         WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3881         /* Tx activity timeout for LTR, in us */
3882         WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3883         /* L1SS state machine enable */
3884         WMI_PDEV_PARAM_L1SS_ENABLE,
3885         /* Deep sleep state machine enable */
3886         WMI_PDEV_PARAM_DSLEEP_ENABLE,
3887         /* RX buffering flush enable */
3888         WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3889         /* RX buffering matermark */
3890         WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3891         /* RX buffering timeout enable */
3892         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3893         /* RX buffering timeout value */
3894         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3895         /* pdev level stats update period in ms */
3896         WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3897         /* vdev level stats update period in ms */
3898         WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3899         /* peer level stats update period in ms */
3900         WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3901         /* beacon filter status update period */
3902         WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3903         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3904         WMI_PDEV_PARAM_PMF_QOS,
3905         /* Access category on which ARP frames are sent */
3906         WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3907         /* DCS configuration */
3908         WMI_PDEV_PARAM_DCS,
3909         /* Enable/Disable ANI on target */
3910         WMI_PDEV_PARAM_ANI_ENABLE,
3911         /* configure the ANI polling period */
3912         WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3913         /* configure the ANI listening period */
3914         WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3915         /* configure OFDM immunity level */
3916         WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3917         /* configure CCK immunity level */
3918         WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3919         /* Enable/Disable CDD for 1x1 STAs in rate control module */
3920         WMI_PDEV_PARAM_DYNTXCHAIN,
3921         /* Enable/Disable proxy STA */
3922         WMI_PDEV_PARAM_PROXY_STA,
3923         /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3924         WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3925         /* Enable/Disable power gating sleep */
3926         WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3927 };
3928
3929 enum wmi_10x_pdev_param {
3930         /* TX chian mask */
3931         WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3932         /* RX chian mask */
3933         WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3934         /* TX power limit for 2G Radio */
3935         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3936         /* TX power limit for 5G Radio */
3937         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3938         /* TX power scale */
3939         WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3940         /* Beacon generation mode . 0: host, 1: target   */
3941         WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3942         /* Beacon generation mode . 0: staggered 1: bursted   */
3943         WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3944         /*
3945          * Resource manager off chan mode .
3946          * 0: turn off offchan mode. 1: turn on offchan mode
3947          */
3948         WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3949         /*
3950          * Protection mode:
3951          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3952          */
3953         WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3954         /* Dynamic bandwidth 0: disable 1: enable */
3955         WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3956         /* Non aggregate/ 11g sw retry threshold.0-disable */
3957         WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3958         /* aggregate sw retry threshold. 0-disable*/
3959         WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3960         /* Station kickout threshold (non of consecutive failures).0-disable */
3961         WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3962         /* Aggerate size scaling configuration per AC */
3963         WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3964         /* LTR enable */
3965         WMI_10X_PDEV_PARAM_LTR_ENABLE,
3966         /* LTR latency for BE, in us */
3967         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3968         /* LTR latency for BK, in us */
3969         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3970         /* LTR latency for VI, in us */
3971         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3972         /* LTR latency for VO, in us  */
3973         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3974         /* LTR AC latency timeout, in ms */
3975         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3976         /* LTR platform latency override, in us */
3977         WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3978         /* LTR-RX override, in us */
3979         WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3980         /* Tx activity timeout for LTR, in us */
3981         WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3982         /* L1SS state machine enable */
3983         WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3984         /* Deep sleep state machine enable */
3985         WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3986         /* pdev level stats update period in ms */
3987         WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3988         /* vdev level stats update period in ms */
3989         WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3990         /* peer level stats update period in ms */
3991         WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3992         /* beacon filter status update period */
3993         WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3994         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3995         WMI_10X_PDEV_PARAM_PMF_QOS,
3996         /* Access category on which ARP and DHCP frames are sent */
3997         WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3998         /* DCS configuration */
3999         WMI_10X_PDEV_PARAM_DCS,
4000         /* Enable/Disable ANI on target */
4001         WMI_10X_PDEV_PARAM_ANI_ENABLE,
4002         /* configure the ANI polling period */
4003         WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
4004         /* configure the ANI listening period */
4005         WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4006         /* configure OFDM immunity level */
4007         WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4008         /* configure CCK immunity level */
4009         WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4010         /* Enable/Disable CDD for 1x1 STAs in rate control module */
4011         WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4012         /* Enable/Disable Fast channel reset*/
4013         WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4014         /* Set Bursting DUR */
4015         WMI_10X_PDEV_PARAM_BURST_DUR,
4016         /* Set Bursting Enable*/
4017         WMI_10X_PDEV_PARAM_BURST_ENABLE,
4018
4019         /* following are available as of firmware 10.2 */
4020         WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4021         WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4022         WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4023         WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4024         WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4025         WMI_10X_PDEV_PARAM_RX_FILTER,
4026         WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4027         WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4028         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4029         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4030         WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4031         WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4032         WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4033         WMI_10X_PDEV_PARAM_CAL_PERIOD,
4034         WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4035         WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4036         WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4037         WMI_10X_PDEV_PARAM_PDEV_RESET
4038 };
4039
4040 enum wmi_10_4_pdev_param {
4041         WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4042         WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4043         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4044         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4045         WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4046         WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4047         WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4048         WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4049         WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4050         WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4051         WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4052         WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4053         WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4054         WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4055         WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4056         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4057         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4058         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4059         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4060         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4061         WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4062         WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4063         WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4064         WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4065         WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4066         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4067         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4068         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4069         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4070         WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4071         WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4072         WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4073         WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4074         WMI_10_4_PDEV_PARAM_PMF_QOS,
4075         WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4076         WMI_10_4_PDEV_PARAM_DCS,
4077         WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4078         WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4079         WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4080         WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4081         WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4082         WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4083         WMI_10_4_PDEV_PARAM_PROXY_STA,
4084         WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4085         WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4086         WMI_10_4_PDEV_PARAM_AGGR_BURST,
4087         WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4088         WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4089         WMI_10_4_PDEV_PARAM_BURST_DUR,
4090         WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4091         WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4092         WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4093         WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4094         WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4095         WMI_10_4_PDEV_PARAM_RX_FILTER,
4096         WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4097         WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4098         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4099         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4100         WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4101         WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4102         WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4103         WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4104         WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4105         WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4106         WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4107         WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4108         WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4109         WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4110         WMI_10_4_PDEV_PARAM_EN_STATS,
4111         WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4112         WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4113         WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4114         WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4115         WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4116         WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4117         WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4118         WMI_10_4_PDEV_PARAM_ANT_PLZN,
4119         WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4120         WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4121         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4122         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4123         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4124         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4125         WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4126         WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4127         WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4128         WMI_10_4_PDEV_PARAM_PDEV_RESET,
4129         WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4130         WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4131         WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4132         WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4133         WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4134         WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4135         WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4136         WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4137         WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4138         WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4139         WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4140         WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4141 };
4142
4143 struct wmi_pdev_set_param_cmd {
4144         __le32 param_id;
4145         __le32 param_value;
4146 } __packed;
4147
4148 struct wmi_pdev_set_base_macaddr_cmd {
4149         struct wmi_mac_addr mac_addr;
4150 } __packed;
4151
4152 /* valid period is 1 ~ 60000ms, unit in millisecond */
4153 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4154
4155 struct wmi_pdev_get_tpc_config_cmd {
4156         /* parameter   */
4157         __le32 param;
4158 } __packed;
4159
4160 #define WMI_TPC_CONFIG_PARAM            1
4161 #define WMI_TPC_FINAL_RATE_MAX          240
4162 #define WMI_TPC_TX_N_CHAIN              4
4163 #define WMI_TPC_RATE_MAX               (WMI_TPC_TX_N_CHAIN * 65)
4164 #define WMI_TPC_PREAM_TABLE_MAX         10
4165 #define WMI_TPC_FLAG                    3
4166 #define WMI_TPC_BUF_SIZE                10
4167 #define WMI_TPC_BEAMFORMING             2
4168
4169 enum wmi_tpc_table_type {
4170         WMI_TPC_TABLE_TYPE_CDD = 0,
4171         WMI_TPC_TABLE_TYPE_STBC = 1,
4172         WMI_TPC_TABLE_TYPE_TXBF = 2,
4173 };
4174
4175 enum wmi_tpc_config_event_flag {
4176         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD     = 0x1,
4177         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC    = 0x2,
4178         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF    = 0x4,
4179 };
4180
4181 struct wmi_pdev_tpc_config_event {
4182         __le32 reg_domain;
4183         __le32 chan_freq;
4184         __le32 phy_mode;
4185         __le32 twice_antenna_reduction;
4186         __le32 twice_max_rd_power;
4187         a_sle32 twice_antenna_gain;
4188         __le32 power_limit;
4189         __le32 rate_max;
4190         __le32 num_tx_chain;
4191         __le32 ctl;
4192         __le32 flags;
4193         s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4194         s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4195         s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4196         s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4197         u8 rates_array[WMI_TPC_RATE_MAX];
4198 } __packed;
4199
4200 /* Transmit power scale factor. */
4201 enum wmi_tp_scale {
4202         WMI_TP_SCALE_MAX    = 0,        /* no scaling (default) */
4203         WMI_TP_SCALE_50     = 1,        /* 50% of max (-3 dBm) */
4204         WMI_TP_SCALE_25     = 2,        /* 25% of max (-6 dBm) */
4205         WMI_TP_SCALE_12     = 3,        /* 12% of max (-9 dBm) */
4206         WMI_TP_SCALE_MIN    = 4,        /* min, but still on   */
4207         WMI_TP_SCALE_SIZE   = 5,        /* max num of enum     */
4208 };
4209
4210 struct wmi_pdev_tpc_final_table_event {
4211         __le32 reg_domain;
4212         __le32 chan_freq;
4213         __le32 phy_mode;
4214         __le32 twice_antenna_reduction;
4215         __le32 twice_max_rd_power;
4216         a_sle32 twice_antenna_gain;
4217         __le32 power_limit;
4218         __le32 rate_max;
4219         __le32 num_tx_chain;
4220         __le32 ctl;
4221         __le32 flags;
4222         s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4223         s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4224         s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4225         s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4226         u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4227         u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4228            [WMI_TPC_TX_N_CHAIN];
4229 } __packed;
4230
4231 struct wmi_pdev_get_tpc_table_cmd {
4232         __le32 param;
4233 } __packed;
4234
4235 enum wmi_tpc_pream_2ghz {
4236         WMI_TPC_PREAM_2GHZ_CCK = 0,
4237         WMI_TPC_PREAM_2GHZ_OFDM,
4238         WMI_TPC_PREAM_2GHZ_HT20,
4239         WMI_TPC_PREAM_2GHZ_HT40,
4240         WMI_TPC_PREAM_2GHZ_VHT20,
4241         WMI_TPC_PREAM_2GHZ_VHT40,
4242         WMI_TPC_PREAM_2GHZ_VHT80,
4243 };
4244
4245 enum wmi_tpc_pream_5ghz {
4246         WMI_TPC_PREAM_5GHZ_OFDM = 1,
4247         WMI_TPC_PREAM_5GHZ_HT20,
4248         WMI_TPC_PREAM_5GHZ_HT40,
4249         WMI_TPC_PREAM_5GHZ_VHT20,
4250         WMI_TPC_PREAM_5GHZ_VHT40,
4251         WMI_TPC_PREAM_5GHZ_VHT80,
4252         WMI_TPC_PREAM_5GHZ_HTCUP,
4253 };
4254
4255 #define WMI_PEER_PS_STATE_DISABLED      2
4256
4257 struct wmi_peer_sta_ps_state_chg_event {
4258         struct wmi_mac_addr peer_macaddr;
4259         __le32 peer_ps_state;
4260 } __packed;
4261
4262 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4263
4264 struct wmi_debug_mesg_event {
4265         /* message buffer, NULL terminated */
4266         char bufp[WMI_MAX_DEBUG_MESG];
4267 } __packed;
4268
4269 enum {
4270         /* P2P device */
4271         VDEV_SUBTYPE_P2PDEV = 0,
4272         /* P2P client */
4273         VDEV_SUBTYPE_P2PCLI,
4274         /* P2P GO */
4275         VDEV_SUBTYPE_P2PGO,
4276         /* BT3.0 HS */
4277         VDEV_SUBTYPE_BT,
4278 };
4279
4280 struct wmi_pdev_set_channel_cmd {
4281         /* idnore power , only use flags , mode and freq */
4282         struct wmi_channel chan;
4283 } __packed;
4284
4285 struct wmi_pdev_pktlog_enable_cmd {
4286         __le32 ev_bitmap;
4287 } __packed;
4288
4289 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4290 #define WMI_DSCP_MAP_MAX    (64)
4291 struct wmi_pdev_set_dscp_tid_map_cmd {
4292         /* map indicating DSCP to TID conversion */
4293         __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4294 } __packed;
4295
4296 enum mcast_bcast_rate_id {
4297         WMI_SET_MCAST_RATE,
4298         WMI_SET_BCAST_RATE
4299 };
4300
4301 struct mcast_bcast_rate {
4302         enum mcast_bcast_rate_id rate_id;
4303         __le32 rate;
4304 } __packed;
4305
4306 struct wmi_wmm_params {
4307         __le32 cwmin;
4308         __le32 cwmax;
4309         __le32 aifs;
4310         __le32 txop;
4311         __le32 acm;
4312         __le32 no_ack;
4313 } __packed;
4314
4315 struct wmi_pdev_set_wmm_params {
4316         struct wmi_wmm_params ac_be;
4317         struct wmi_wmm_params ac_bk;
4318         struct wmi_wmm_params ac_vi;
4319         struct wmi_wmm_params ac_vo;
4320 } __packed;
4321
4322 struct wmi_wmm_params_arg {
4323         u32 cwmin;
4324         u32 cwmax;
4325         u32 aifs;
4326         u32 txop;
4327         u32 acm;
4328         u32 no_ack;
4329 };
4330
4331 struct wmi_wmm_params_all_arg {
4332         struct wmi_wmm_params_arg ac_be;
4333         struct wmi_wmm_params_arg ac_bk;
4334         struct wmi_wmm_params_arg ac_vi;
4335         struct wmi_wmm_params_arg ac_vo;
4336 };
4337
4338 struct wmi_pdev_stats_tx {
4339         /* Num HTT cookies queued to dispatch list */
4340         __le32 comp_queued;
4341
4342         /* Num HTT cookies dispatched */
4343         __le32 comp_delivered;
4344
4345         /* Num MSDU queued to WAL */
4346         __le32 msdu_enqued;
4347
4348         /* Num MPDU queue to WAL */
4349         __le32 mpdu_enqued;
4350
4351         /* Num MSDUs dropped by WMM limit */
4352         __le32 wmm_drop;
4353
4354         /* Num Local frames queued */
4355         __le32 local_enqued;
4356
4357         /* Num Local frames done */
4358         __le32 local_freed;
4359
4360         /* Num queued to HW */
4361         __le32 hw_queued;
4362
4363         /* Num PPDU reaped from HW */
4364         __le32 hw_reaped;
4365
4366         /* Num underruns */
4367         __le32 underrun;
4368
4369         /* Num PPDUs cleaned up in TX abort */
4370         __le32 tx_abort;
4371
4372         /* Num MPDUs requeued by SW */
4373         __le32 mpdus_requeued;
4374
4375         /* excessive retries */
4376         __le32 tx_ko;
4377
4378         /* data hw rate code */
4379         __le32 data_rc;
4380
4381         /* Scheduler self triggers */
4382         __le32 self_triggers;
4383
4384         /* frames dropped due to excessive sw retries */
4385         __le32 sw_retry_failure;
4386
4387         /* illegal rate phy errors  */
4388         __le32 illgl_rate_phy_err;
4389
4390         /* wal pdev continuous xretry */
4391         __le32 pdev_cont_xretry;
4392
4393         /* wal pdev continuous xretry */
4394         __le32 pdev_tx_timeout;
4395
4396         /* wal pdev resets  */
4397         __le32 pdev_resets;
4398
4399         /* frames dropped due to non-availability of stateless TIDs */
4400         __le32 stateless_tid_alloc_failure;
4401
4402         __le32 phy_underrun;
4403
4404         /* MPDU is more than txop limit */
4405         __le32 txop_ovf;
4406 } __packed;
4407
4408 struct wmi_10_4_pdev_stats_tx {
4409         /* Num HTT cookies queued to dispatch list */
4410         __le32 comp_queued;
4411
4412         /* Num HTT cookies dispatched */
4413         __le32 comp_delivered;
4414
4415         /* Num MSDU queued to WAL */
4416         __le32 msdu_enqued;
4417
4418         /* Num MPDU queue to WAL */
4419         __le32 mpdu_enqued;
4420
4421         /* Num MSDUs dropped by WMM limit */
4422         __le32 wmm_drop;
4423
4424         /* Num Local frames queued */
4425         __le32 local_enqued;
4426
4427         /* Num Local frames done */
4428         __le32 local_freed;
4429
4430         /* Num queued to HW */
4431         __le32 hw_queued;
4432
4433         /* Num PPDU reaped from HW */
4434         __le32 hw_reaped;
4435
4436         /* Num underruns */
4437         __le32 underrun;
4438
4439         /* HW Paused. */
4440         __le32  hw_paused;
4441
4442         /* Num PPDUs cleaned up in TX abort */
4443         __le32 tx_abort;
4444
4445         /* Num MPDUs requeued by SW */
4446         __le32 mpdus_requeued;
4447
4448         /* excessive retries */
4449         __le32 tx_ko;
4450
4451         /* data hw rate code */
4452         __le32 data_rc;
4453
4454         /* Scheduler self triggers */
4455         __le32 self_triggers;
4456
4457         /* frames dropped due to excessive sw retries */
4458         __le32 sw_retry_failure;
4459
4460         /* illegal rate phy errors  */
4461         __le32 illgl_rate_phy_err;
4462
4463         /* wal pdev continuous xretry */
4464         __le32 pdev_cont_xretry;
4465
4466         /* wal pdev tx timeouts */
4467         __le32 pdev_tx_timeout;
4468
4469         /* wal pdev resets  */
4470         __le32 pdev_resets;
4471
4472         /* frames dropped due to non-availability of stateless TIDs */
4473         __le32 stateless_tid_alloc_failure;
4474
4475         __le32 phy_underrun;
4476
4477         /* MPDU is more than txop limit */
4478         __le32 txop_ovf;
4479
4480         /* Number of Sequences posted */
4481         __le32 seq_posted;
4482
4483         /* Number of Sequences failed queueing */
4484         __le32 seq_failed_queueing;
4485
4486         /* Number of Sequences completed */
4487         __le32 seq_completed;
4488
4489         /* Number of Sequences restarted */
4490         __le32 seq_restarted;
4491
4492         /* Number of MU Sequences posted */
4493         __le32 mu_seq_posted;
4494
4495         /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4496         __le32 mpdus_sw_flush;
4497
4498         /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4499         __le32 mpdus_hw_filter;
4500
4501         /* Num MPDUs truncated by PDG
4502          * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4503          */
4504         __le32 mpdus_truncated;
4505
4506         /* Num MPDUs that was tried but didn't receive ACK or BA */
4507         __le32 mpdus_ack_failed;
4508
4509         /* Num MPDUs that was dropped due to expiry. */
4510         __le32 mpdus_expired;
4511 } __packed;
4512
4513 struct wmi_pdev_stats_rx {
4514         /* Cnts any change in ring routing mid-ppdu */
4515         __le32 mid_ppdu_route_change;
4516
4517         /* Total number of statuses processed */
4518         __le32 status_rcvd;
4519
4520         /* Extra frags on rings 0-3 */
4521         __le32 r0_frags;
4522         __le32 r1_frags;
4523         __le32 r2_frags;
4524         __le32 r3_frags;
4525
4526         /* MSDUs / MPDUs delivered to HTT */
4527         __le32 htt_msdus;
4528         __le32 htt_mpdus;
4529
4530         /* MSDUs / MPDUs delivered to local stack */
4531         __le32 loc_msdus;
4532         __le32 loc_mpdus;
4533
4534         /* AMSDUs that have more MSDUs than the status ring size */
4535         __le32 oversize_amsdu;
4536
4537         /* Number of PHY errors */
4538         __le32 phy_errs;
4539
4540         /* Number of PHY errors drops */
4541         __le32 phy_err_drop;
4542
4543         /* Number of mpdu errors - FCS, MIC, ENC etc. */
4544         __le32 mpdu_errs;
4545 } __packed;
4546
4547 struct wmi_pdev_stats_peer {
4548         /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4549         __le32 dummy;
4550 } __packed;
4551
4552 enum wmi_stats_id {
4553         WMI_STAT_PEER = BIT(0),
4554         WMI_STAT_AP = BIT(1),
4555         WMI_STAT_PDEV = BIT(2),
4556         WMI_STAT_VDEV = BIT(3),
4557         WMI_STAT_BCNFLT = BIT(4),
4558         WMI_STAT_VDEV_RATE = BIT(5),
4559 };
4560
4561 enum wmi_10_4_stats_id {
4562         WMI_10_4_STAT_PEER              = BIT(0),
4563         WMI_10_4_STAT_AP                = BIT(1),
4564         WMI_10_4_STAT_INST              = BIT(2),
4565         WMI_10_4_STAT_PEER_EXTD         = BIT(3),
4566         WMI_10_4_STAT_VDEV_EXTD         = BIT(4),
4567 };
4568
4569 enum wmi_tlv_stats_id {
4570         WMI_TLV_STAT_PEER       = BIT(0),
4571         WMI_TLV_STAT_AP         = BIT(1),
4572         WMI_TLV_STAT_PDEV       = BIT(2),
4573         WMI_TLV_STAT_VDEV       = BIT(3),
4574         WMI_TLV_STAT_PEER_EXTD  = BIT(10),
4575 };
4576
4577 struct wlan_inst_rssi_args {
4578         __le16 cfg_retry_count;
4579         __le16 retry_count;
4580 };
4581
4582 struct wmi_request_stats_cmd {
4583         __le32 stats_id;
4584
4585         __le32 vdev_id;
4586
4587         /* peer MAC address */
4588         struct wmi_mac_addr peer_macaddr;
4589
4590         /* Instantaneous RSSI arguments */
4591         struct wlan_inst_rssi_args inst_rssi_args;
4592 } __packed;
4593
4594 enum wmi_peer_stats_info_request_type {
4595         /* request stats of one specified peer */
4596         WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4597         /* request stats of all peers belong to specified VDEV */
4598         WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4599 };
4600
4601 /* Suspend option */
4602 enum {
4603         /* suspend */
4604         WMI_PDEV_SUSPEND,
4605
4606         /* suspend and disable all interrupts */
4607         WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4608 };
4609
4610 struct wmi_pdev_suspend_cmd {
4611         /* suspend option sent to target */
4612         __le32 suspend_opt;
4613 } __packed;
4614
4615 struct wmi_stats_event {
4616         __le32 stats_id; /* WMI_STAT_ */
4617         /*
4618          * number of pdev stats event structures
4619          * (wmi_pdev_stats) 0 or 1
4620          */
4621         __le32 num_pdev_stats;
4622         /*
4623          * number of vdev stats event structures
4624          * (wmi_vdev_stats) 0 or max vdevs
4625          */
4626         __le32 num_vdev_stats;
4627         /*
4628          * number of peer stats event structures
4629          * (wmi_peer_stats) 0 or max peers
4630          */
4631         __le32 num_peer_stats;
4632         __le32 num_bcnflt_stats;
4633         /*
4634          * followed by
4635          *   num_pdev_stats * size of(struct wmi_pdev_stats)
4636          *   num_vdev_stats * size of(struct wmi_vdev_stats)
4637          *   num_peer_stats * size of(struct wmi_peer_stats)
4638          *
4639          *  By having a zero sized array, the pointer to data area
4640          *  becomes available without increasing the struct size
4641          */
4642         u8 data[];
4643 } __packed;
4644
4645 struct wmi_10_2_stats_event {
4646         __le32 stats_id; /* %WMI_REQUEST_ */
4647         __le32 num_pdev_stats;
4648         __le32 num_pdev_ext_stats;
4649         __le32 num_vdev_stats;
4650         __le32 num_peer_stats;
4651         __le32 num_bcnflt_stats;
4652         u8 data[];
4653 } __packed;
4654
4655 /*
4656  * PDEV statistics
4657  * TODO: add all PDEV stats here
4658  */
4659 struct wmi_pdev_stats_base {
4660         __le32 chan_nf;
4661         __le32 tx_frame_count; /* Cycles spent transmitting frames */
4662         __le32 rx_frame_count; /* Cycles spent receiving frames */
4663         __le32 rx_clear_count; /* Total channel busy time, evidently */
4664         __le32 cycle_count; /* Total on-channel time */
4665         __le32 phy_err_count;
4666         __le32 chan_tx_pwr;
4667 } __packed;
4668
4669 struct wmi_pdev_stats {
4670         struct wmi_pdev_stats_base base;
4671         struct wmi_pdev_stats_tx tx;
4672         struct wmi_pdev_stats_rx rx;
4673         struct wmi_pdev_stats_peer peer;
4674 } __packed;
4675
4676 struct wmi_pdev_stats_extra {
4677         __le32 ack_rx_bad;
4678         __le32 rts_bad;
4679         __le32 rts_good;
4680         __le32 fcs_bad;
4681         __le32 no_beacons;
4682         __le32 mib_int_count;
4683 } __packed;
4684
4685 struct wmi_10x_pdev_stats {
4686         struct wmi_pdev_stats_base base;
4687         struct wmi_pdev_stats_tx tx;
4688         struct wmi_pdev_stats_rx rx;
4689         struct wmi_pdev_stats_peer peer;
4690         struct wmi_pdev_stats_extra extra;
4691 } __packed;
4692
4693 struct wmi_pdev_stats_mem {
4694         __le32 dram_free;
4695         __le32 iram_free;
4696 } __packed;
4697
4698 struct wmi_10_2_pdev_stats {
4699         struct wmi_pdev_stats_base base;
4700         struct wmi_pdev_stats_tx tx;
4701         __le32 mc_drop;
4702         struct wmi_pdev_stats_rx rx;
4703         __le32 pdev_rx_timeout;
4704         struct wmi_pdev_stats_mem mem;
4705         struct wmi_pdev_stats_peer peer;
4706         struct wmi_pdev_stats_extra extra;
4707 } __packed;
4708
4709 struct wmi_10_4_pdev_stats {
4710         struct wmi_pdev_stats_base base;
4711         struct wmi_10_4_pdev_stats_tx tx;
4712         struct wmi_pdev_stats_rx rx;
4713         __le32 rx_ovfl_errs;
4714         struct wmi_pdev_stats_mem mem;
4715         __le32 sram_free_size;
4716         struct wmi_pdev_stats_extra extra;
4717 } __packed;
4718
4719 /*
4720  * VDEV statistics
4721  */
4722
4723 #define WMI_VDEV_STATS_FTM_COUNT_VALID  BIT(31)
4724 #define WMI_VDEV_STATS_FTM_COUNT_LSB    0
4725 #define WMI_VDEV_STATS_FTM_COUNT_MASK   0x7fffffff
4726
4727 struct wmi_vdev_stats {
4728         __le32 vdev_id;
4729 } __packed;
4730
4731 struct wmi_vdev_stats_extd {
4732         __le32 vdev_id;
4733         __le32 ppdu_aggr_cnt;
4734         __le32 ppdu_noack;
4735         __le32 mpdu_queued;
4736         __le32 ppdu_nonaggr_cnt;
4737         __le32 mpdu_sw_requeued;
4738         __le32 mpdu_suc_retry;
4739         __le32 mpdu_suc_multitry;
4740         __le32 mpdu_fail_retry;
4741         __le32 tx_ftm_suc;
4742         __le32 tx_ftm_suc_retry;
4743         __le32 tx_ftm_fail;
4744         __le32 rx_ftmr_cnt;
4745         __le32 rx_ftmr_dup_cnt;
4746         __le32 rx_iftmr_cnt;
4747         __le32 rx_iftmr_dup_cnt;
4748         __le32 reserved[6];
4749 } __packed;
4750
4751 /*
4752  * peer statistics.
4753  * TODO: add more stats
4754  */
4755 struct wmi_peer_stats {
4756         struct wmi_mac_addr peer_macaddr;
4757         __le32 peer_rssi;
4758         __le32 peer_tx_rate;
4759 } __packed;
4760
4761 struct wmi_10x_peer_stats {
4762         struct wmi_peer_stats old;
4763         __le32 peer_rx_rate;
4764 } __packed;
4765
4766 struct wmi_10_2_peer_stats {
4767         struct wmi_peer_stats old;
4768         __le32 peer_rx_rate;
4769         __le32 current_per;
4770         __le32 retries;
4771         __le32 tx_rate_count;
4772         __le32 max_4ms_frame_len;
4773         __le32 total_sub_frames;
4774         __le32 tx_bytes;
4775         __le32 num_pkt_loss_overflow[4];
4776         __le32 num_pkt_loss_excess_retry[4];
4777 } __packed;
4778
4779 struct wmi_10_2_4_peer_stats {
4780         struct wmi_10_2_peer_stats common;
4781         __le32 peer_rssi_changed;
4782 } __packed;
4783
4784 struct wmi_10_2_4_ext_peer_stats {
4785         struct wmi_10_2_peer_stats common;
4786         __le32 peer_rssi_changed;
4787         __le32 rx_duration;
4788 } __packed;
4789
4790 struct wmi_10_4_peer_stats {
4791         struct wmi_mac_addr peer_macaddr;
4792         __le32 peer_rssi;
4793         __le32 peer_rssi_seq_num;
4794         __le32 peer_tx_rate;
4795         __le32 peer_rx_rate;
4796         __le32 current_per;
4797         __le32 retries;
4798         __le32 tx_rate_count;
4799         __le32 max_4ms_frame_len;
4800         __le32 total_sub_frames;
4801         __le32 tx_bytes;
4802         __le32 num_pkt_loss_overflow[4];
4803         __le32 num_pkt_loss_excess_retry[4];
4804         __le32 peer_rssi_changed;
4805 } __packed;
4806
4807 struct wmi_10_4_peer_extd_stats {
4808         struct wmi_mac_addr peer_macaddr;
4809         __le32 inactive_time;
4810         __le32 peer_chain_rssi;
4811         __le32 rx_duration;
4812         __le32 reserved[10];
4813 } __packed;
4814
4815 struct wmi_10_4_bss_bcn_stats {
4816         __le32 vdev_id;
4817         __le32 bss_bcns_dropped;
4818         __le32 bss_bcn_delivered;
4819 } __packed;
4820
4821 struct wmi_10_4_bss_bcn_filter_stats {
4822         __le32 bcns_dropped;
4823         __le32 bcns_delivered;
4824         __le32 active_filters;
4825         struct wmi_10_4_bss_bcn_stats bss_stats;
4826 } __packed;
4827
4828 struct wmi_10_2_pdev_ext_stats {
4829         __le32 rx_rssi_comb;
4830         __le32 rx_rssi[4];
4831         __le32 rx_mcs[10];
4832         __le32 tx_mcs[10];
4833         __le32 ack_rssi;
4834 } __packed;
4835
4836 struct wmi_vdev_create_cmd {
4837         __le32 vdev_id;
4838         __le32 vdev_type;
4839         __le32 vdev_subtype;
4840         struct wmi_mac_addr vdev_macaddr;
4841 } __packed;
4842
4843 enum wmi_vdev_type {
4844         WMI_VDEV_TYPE_AP      = 1,
4845         WMI_VDEV_TYPE_STA     = 2,
4846         WMI_VDEV_TYPE_IBSS    = 3,
4847         WMI_VDEV_TYPE_MONITOR = 4,
4848 };
4849
4850 enum wmi_vdev_subtype {
4851         WMI_VDEV_SUBTYPE_NONE,
4852         WMI_VDEV_SUBTYPE_P2P_DEVICE,
4853         WMI_VDEV_SUBTYPE_P2P_CLIENT,
4854         WMI_VDEV_SUBTYPE_P2P_GO,
4855         WMI_VDEV_SUBTYPE_PROXY_STA,
4856         WMI_VDEV_SUBTYPE_MESH_11S,
4857         WMI_VDEV_SUBTYPE_MESH_NON_11S,
4858 };
4859
4860 enum wmi_vdev_subtype_legacy {
4861         WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,
4862         WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,
4863         WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,
4864         WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,
4865         WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4866 };
4867
4868 enum wmi_vdev_subtype_10_2_4 {
4869         WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,
4870         WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,
4871         WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,
4872         WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,
4873         WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4874         WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,
4875 };
4876
4877 enum wmi_vdev_subtype_10_4 {
4878         WMI_VDEV_SUBTYPE_10_4_NONE         = 0,
4879         WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,
4880         WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,
4881         WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,
4882         WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,
4883         WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4884         WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,
4885 };
4886
4887 /* values for vdev_subtype */
4888
4889 /* values for vdev_start_request flags */
4890 /*
4891  * Indicates that AP VDEV uses hidden ssid. only valid for
4892  *  AP/GO
4893  */
4894 #define WMI_VDEV_START_HIDDEN_SSID  (1 << 0)
4895 /*
4896  * Indicates if robust management frame/management frame
4897  *  protection is enabled. For GO/AP vdevs, it indicates that
4898  *  it may support station/client associations with RMF enabled.
4899  *  For STA/client vdevs, it indicates that sta will
4900  *  associate with AP with RMF enabled.
4901  */
4902 #define WMI_VDEV_START_PMF_ENABLED  (1 << 1)
4903
4904 struct wmi_p2p_noa_descriptor {
4905         __le32 type_count; /* 255: continuous schedule, 0: reserved */
4906         __le32 duration;  /* Absent period duration in micro seconds */
4907         __le32 interval;   /* Absent period interval in micro seconds */
4908         __le32 start_time; /* 32 bit tsf time when in starts */
4909 } __packed;
4910
4911 struct wmi_vdev_start_request_cmd {
4912         /* WMI channel */
4913         struct wmi_channel chan;
4914         /* unique id identifying the VDEV, generated by the caller */
4915         __le32 vdev_id;
4916         /* requestor id identifying the caller module */
4917         __le32 requestor_id;
4918         /* beacon interval from received beacon */
4919         __le32 beacon_interval;
4920         /* DTIM Period from the received beacon */
4921         __le32 dtim_period;
4922         /* Flags */
4923         __le32 flags;
4924         /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4925         struct wmi_ssid ssid;
4926         /* beacon/probe response xmit rate. Applicable for SoftAP. */
4927         __le32 bcn_tx_rate;
4928         /* beacon/probe response xmit power. Applicable for SoftAP. */
4929         __le32 bcn_tx_power;
4930         /* number of p2p NOA descriptor(s) from scan entry */
4931         __le32 num_noa_descriptors;
4932         /*
4933          * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4934          * During CAC, Our HW shouldn't ack ditected frames
4935          */
4936         __le32 disable_hw_ack;
4937         /* actual p2p NOA descriptor from scan entry */
4938         struct wmi_p2p_noa_descriptor noa_descriptors[2];
4939 } __packed;
4940
4941 struct wmi_vdev_restart_request_cmd {
4942         struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4943 } __packed;
4944
4945 struct wmi_vdev_start_request_arg {
4946         u32 vdev_id;
4947         struct wmi_channel_arg channel;
4948         u32 bcn_intval;
4949         u32 dtim_period;
4950         u8 *ssid;
4951         u32 ssid_len;
4952         u32 bcn_tx_rate;
4953         u32 bcn_tx_power;
4954         bool disable_hw_ack;
4955         bool hidden_ssid;
4956         bool pmf_enabled;
4957 };
4958
4959 struct wmi_vdev_delete_cmd {
4960         /* unique id identifying the VDEV, generated by the caller */
4961         __le32 vdev_id;
4962 } __packed;
4963
4964 struct wmi_vdev_up_cmd {
4965         __le32 vdev_id;
4966         __le32 vdev_assoc_id;
4967         struct wmi_mac_addr vdev_bssid;
4968 } __packed;
4969
4970 struct wmi_vdev_stop_cmd {
4971         __le32 vdev_id;
4972 } __packed;
4973
4974 struct wmi_vdev_down_cmd {
4975         __le32 vdev_id;
4976 } __packed;
4977
4978 struct wmi_vdev_standby_response_cmd {
4979         /* unique id identifying the VDEV, generated by the caller */
4980         __le32 vdev_id;
4981 } __packed;
4982
4983 struct wmi_vdev_resume_response_cmd {
4984         /* unique id identifying the VDEV, generated by the caller */
4985         __le32 vdev_id;
4986 } __packed;
4987
4988 struct wmi_vdev_set_param_cmd {
4989         __le32 vdev_id;
4990         __le32 param_id;
4991         __le32 param_value;
4992 } __packed;
4993
4994 #define WMI_MAX_KEY_INDEX   3
4995 #define WMI_MAX_KEY_LEN     32
4996
4997 #define WMI_KEY_PAIRWISE 0x00
4998 #define WMI_KEY_GROUP    0x01
4999 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5000
5001 struct wmi_key_seq_counter {
5002         __le32 key_seq_counter_l;
5003         __le32 key_seq_counter_h;
5004 } __packed;
5005
5006 enum wmi_cipher_suites {
5007         WMI_CIPHER_NONE,
5008         WMI_CIPHER_WEP,
5009         WMI_CIPHER_TKIP,
5010         WMI_CIPHER_AES_OCB,
5011         WMI_CIPHER_AES_CCM,
5012         WMI_CIPHER_WAPI,
5013         WMI_CIPHER_CKIP,
5014         WMI_CIPHER_AES_CMAC,
5015         WMI_CIPHER_AES_GCM,
5016 };
5017
5018 enum wmi_tlv_cipher_suites {
5019         WMI_TLV_CIPHER_NONE,
5020         WMI_TLV_CIPHER_WEP,
5021         WMI_TLV_CIPHER_TKIP,
5022         WMI_TLV_CIPHER_AES_OCB,
5023         WMI_TLV_CIPHER_AES_CCM,
5024         WMI_TLV_CIPHER_WAPI,
5025         WMI_TLV_CIPHER_CKIP,
5026         WMI_TLV_CIPHER_AES_CMAC,
5027         WMI_TLV_CIPHER_ANY,
5028         WMI_TLV_CIPHER_AES_GCM,
5029 };
5030
5031 struct wmi_vdev_install_key_cmd {
5032         __le32 vdev_id;
5033         struct wmi_mac_addr peer_macaddr;
5034         __le32 key_idx;
5035         __le32 key_flags;
5036         __le32 key_cipher; /* %WMI_CIPHER_ */
5037         struct wmi_key_seq_counter key_rsc_counter;
5038         struct wmi_key_seq_counter key_global_rsc_counter;
5039         struct wmi_key_seq_counter key_tsc_counter;
5040         u8 wpi_key_rsc_counter[16];
5041         u8 wpi_key_tsc_counter[16];
5042         __le32 key_len;
5043         __le32 key_txmic_len;
5044         __le32 key_rxmic_len;
5045
5046         /* contains key followed by tx mic followed by rx mic */
5047         u8 key_data[];
5048 } __packed;
5049
5050 struct wmi_vdev_install_key_arg {
5051         u32 vdev_id;
5052         const u8 *macaddr;
5053         u32 key_idx;
5054         u32 key_flags;
5055         u32 key_cipher;
5056         u32 key_len;
5057         u32 key_txmic_len;
5058         u32 key_rxmic_len;
5059         const void *key_data;
5060 };
5061
5062 /*
5063  * vdev fixed rate format:
5064  * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5065  * - nss      - b5:b4 - ss number (0 mean 1ss)
5066  * - rate_mcs - b3:b0 - as below
5067  *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5068  *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5069  *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5070  *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5071  *    HT/VHT: MCS index
5072  */
5073
5074 /* Preamble types to be used with VDEV fixed rate configuration */
5075 enum wmi_rate_preamble {
5076         WMI_RATE_PREAMBLE_OFDM,
5077         WMI_RATE_PREAMBLE_CCK,
5078         WMI_RATE_PREAMBLE_HT,
5079         WMI_RATE_PREAMBLE_VHT,
5080 };
5081
5082 #define ATH10K_HW_NSS(rate)             (1 + (((rate) >> 4) & 0x3))
5083 #define ATH10K_HW_PREAMBLE(rate)        (((rate) >> 6) & 0x3)
5084 #define ATH10K_HW_MCS_RATE(rate)        ((rate) & 0xf)
5085 #define ATH10K_HW_LEGACY_RATE(rate)     ((rate) & 0x3f)
5086 #define ATH10K_HW_BW(flags)             (((flags) >> 3) & 0x3)
5087 #define ATH10K_HW_GI(flags)             (((flags) >> 5) & 0x1)
5088 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
5089         (((preamble) << 6) | ((nss) << 4) | (rate))
5090 #define ATH10K_HW_AMPDU(flags)          ((flags) & 0x1)
5091 #define ATH10K_HW_BA_FAIL(flags)        (((flags) >> 1) & 0x3)
5092 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags)      (((flags) >> 6) & 0x1)
5093
5094 #define ATH10K_VHT_MCS_NUM      10
5095 #define ATH10K_BW_NUM           6
5096 #define ATH10K_NSS_NUM          4
5097 #define ATH10K_LEGACY_NUM       12
5098 #define ATH10K_GI_NUM           2
5099 #define ATH10K_HT_MCS_NUM       32
5100 #define ATH10K_RATE_TABLE_NUM   320
5101 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT  2
5102
5103 /* Value to disable fixed rate setting */
5104 #define WMI_FIXED_RATE_NONE    (0xff)
5105
5106 struct wmi_peer_param_map {
5107         u32 smps_state;
5108         u32 ampdu;
5109         u32 authorize;
5110         u32 chan_width;
5111         u32 nss;
5112         u32 use_4addr;
5113         u32 membership;
5114         u32 use_fixed_power;
5115         u32 user_pos;
5116         u32 crit_proto_hint_enabled;
5117         u32 tx_fail_cnt_thr;
5118         u32 set_hw_retry_cts2s;
5119         u32 ibss_atim_win_len;
5120         u32 debug;
5121         u32 phymode;
5122         u32 dummy_var;
5123 };
5124
5125 struct wmi_vdev_param_map {
5126         u32 rts_threshold;
5127         u32 fragmentation_threshold;
5128         u32 beacon_interval;
5129         u32 listen_interval;
5130         u32 multicast_rate;
5131         u32 mgmt_tx_rate;
5132         u32 slot_time;
5133         u32 preamble;
5134         u32 swba_time;
5135         u32 wmi_vdev_stats_update_period;
5136         u32 wmi_vdev_pwrsave_ageout_time;
5137         u32 wmi_vdev_host_swba_interval;
5138         u32 dtim_period;
5139         u32 wmi_vdev_oc_scheduler_air_time_limit;
5140         u32 wds;
5141         u32 atim_window;
5142         u32 bmiss_count_max;
5143         u32 bmiss_first_bcnt;
5144         u32 bmiss_final_bcnt;
5145         u32 feature_wmm;
5146         u32 chwidth;
5147         u32 chextoffset;
5148         u32 disable_htprotection;
5149         u32 sta_quickkickout;
5150         u32 mgmt_rate;
5151         u32 protection_mode;
5152         u32 fixed_rate;
5153         u32 sgi;
5154         u32 ldpc;
5155         u32 tx_stbc;
5156         u32 rx_stbc;
5157         u32 intra_bss_fwd;
5158         u32 def_keyid;
5159         u32 nss;
5160         u32 bcast_data_rate;
5161         u32 mcast_data_rate;
5162         u32 mcast_indicate;
5163         u32 dhcp_indicate;
5164         u32 unknown_dest_indicate;
5165         u32 ap_keepalive_min_idle_inactive_time_secs;
5166         u32 ap_keepalive_max_idle_inactive_time_secs;
5167         u32 ap_keepalive_max_unresponsive_time_secs;
5168         u32 ap_enable_nawds;
5169         u32 mcast2ucast_set;
5170         u32 enable_rtscts;
5171         u32 txbf;
5172         u32 packet_powersave;
5173         u32 drop_unencry;
5174         u32 tx_encap_type;
5175         u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5176         u32 rc_num_retries;
5177         u32 cabq_maxdur;
5178         u32 mfptest_set;
5179         u32 rts_fixed_rate;
5180         u32 vht_sgimask;
5181         u32 vht80_ratemask;
5182         u32 early_rx_adjust_enable;
5183         u32 early_rx_tgt_bmiss_num;
5184         u32 early_rx_bmiss_sample_cycle;
5185         u32 early_rx_slop_step;
5186         u32 early_rx_init_slop;
5187         u32 early_rx_adjust_pause;
5188         u32 proxy_sta;
5189         u32 meru_vc;
5190         u32 rx_decap_type;
5191         u32 bw_nss_ratemask;
5192         u32 inc_tsf;
5193         u32 dec_tsf;
5194         u32 disable_4addr_src_lrn;
5195         u32 rtt_responder_role;
5196 };
5197
5198 #define WMI_VDEV_PARAM_UNSUPPORTED 0
5199
5200 /* the definition of different VDEV parameters */
5201 enum wmi_vdev_param {
5202         /* RTS Threshold */
5203         WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5204         /* Fragmentation threshold */
5205         WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5206         /* beacon interval in TUs */
5207         WMI_VDEV_PARAM_BEACON_INTERVAL,
5208         /* Listen interval in TUs */
5209         WMI_VDEV_PARAM_LISTEN_INTERVAL,
5210         /* multicast rate in Mbps */
5211         WMI_VDEV_PARAM_MULTICAST_RATE,
5212         /* management frame rate in Mbps */
5213         WMI_VDEV_PARAM_MGMT_TX_RATE,
5214         /* slot time (long vs short) */
5215         WMI_VDEV_PARAM_SLOT_TIME,
5216         /* preamble (long vs short) */
5217         WMI_VDEV_PARAM_PREAMBLE,
5218         /* SWBA time (time before tbtt in msec) */
5219         WMI_VDEV_PARAM_SWBA_TIME,
5220         /* time period for updating VDEV stats */
5221         WMI_VDEV_STATS_UPDATE_PERIOD,
5222         /* age out time in msec for frames queued for station in power save */
5223         WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5224         /*
5225          * Host SWBA interval (time in msec before tbtt for SWBA event
5226          * generation).
5227          */
5228         WMI_VDEV_HOST_SWBA_INTERVAL,
5229         /* DTIM period (specified in units of num beacon intervals) */
5230         WMI_VDEV_PARAM_DTIM_PERIOD,
5231         /*
5232          * scheduler air time limit for this VDEV. used by off chan
5233          * scheduler.
5234          */
5235         WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5236         /* enable/disable WDS for this VDEV  */
5237         WMI_VDEV_PARAM_WDS,
5238         /* ATIM Window */
5239         WMI_VDEV_PARAM_ATIM_WINDOW,
5240         /* BMISS max */
5241         WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5242         /* BMISS first time */
5243         WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5244         /* BMISS final time */
5245         WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5246         /* WMM enables/disabled */
5247         WMI_VDEV_PARAM_FEATURE_WMM,
5248         /* Channel width */
5249         WMI_VDEV_PARAM_CHWIDTH,
5250         /* Channel Offset */
5251         WMI_VDEV_PARAM_CHEXTOFFSET,
5252         /* Disable HT Protection */
5253         WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5254         /* Quick STA Kickout */
5255         WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5256         /* Rate to be used with Management frames */
5257         WMI_VDEV_PARAM_MGMT_RATE,
5258         /* Protection Mode */
5259         WMI_VDEV_PARAM_PROTECTION_MODE,
5260         /* Fixed rate setting */
5261         WMI_VDEV_PARAM_FIXED_RATE,
5262         /* Short GI Enable/Disable */
5263         WMI_VDEV_PARAM_SGI,
5264         /* Enable LDPC */
5265         WMI_VDEV_PARAM_LDPC,
5266         /* Enable Tx STBC */
5267         WMI_VDEV_PARAM_TX_STBC,
5268         /* Enable Rx STBC */
5269         WMI_VDEV_PARAM_RX_STBC,
5270         /* Intra BSS forwarding  */
5271         WMI_VDEV_PARAM_INTRA_BSS_FWD,
5272         /* Setting Default xmit key for Vdev */
5273         WMI_VDEV_PARAM_DEF_KEYID,
5274         /* NSS width */
5275         WMI_VDEV_PARAM_NSS,
5276         /* Set the custom rate for the broadcast data frames */
5277         WMI_VDEV_PARAM_BCAST_DATA_RATE,
5278         /* Set the custom rate (rate-code) for multicast data frames */
5279         WMI_VDEV_PARAM_MCAST_DATA_RATE,
5280         /* Tx multicast packet indicate Enable/Disable */
5281         WMI_VDEV_PARAM_MCAST_INDICATE,
5282         /* Tx DHCP packet indicate Enable/Disable */
5283         WMI_VDEV_PARAM_DHCP_INDICATE,
5284         /* Enable host inspection of Tx unicast packet to unknown destination */
5285         WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5286
5287         /* The minimum amount of time AP begins to consider STA inactive */
5288         WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5289
5290         /*
5291          * An associated STA is considered inactive when there is no recent
5292          * TX/RX activity and no downlink frames are buffered for it. Once a
5293          * STA exceeds the maximum idle inactive time, the AP will send an
5294          * 802.11 data-null as a keep alive to verify the STA is still
5295          * associated. If the STA does ACK the data-null, or if the data-null
5296          * is buffered and the STA does not retrieve it, the STA will be
5297          * considered unresponsive
5298          * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5299          */
5300         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5301
5302         /*
5303          * An associated STA is considered unresponsive if there is no recent
5304          * TX/RX activity and downlink frames are buffered for it. Once a STA
5305          * exceeds the maximum unresponsive time, the AP will send a
5306          * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5307          */
5308         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5309
5310         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5311         WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5312         /* Enable/Disable RTS-CTS */
5313         WMI_VDEV_PARAM_ENABLE_RTSCTS,
5314         /* Enable TXBFee/er */
5315         WMI_VDEV_PARAM_TXBF,
5316
5317         /* Set packet power save */
5318         WMI_VDEV_PARAM_PACKET_POWERSAVE,
5319
5320         /*
5321          * Drops un-encrypted packets if eceived in an encrypted connection
5322          * otherwise forwards to host.
5323          */
5324         WMI_VDEV_PARAM_DROP_UNENCRY,
5325
5326         /*
5327          * Set the encapsulation type for frames.
5328          */
5329         WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5330 };
5331
5332 /* the definition of different VDEV parameters */
5333 enum wmi_10x_vdev_param {
5334         /* RTS Threshold */
5335         WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5336         /* Fragmentation threshold */
5337         WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5338         /* beacon interval in TUs */
5339         WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5340         /* Listen interval in TUs */
5341         WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5342         /* multicast rate in Mbps */
5343         WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5344         /* management frame rate in Mbps */
5345         WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5346         /* slot time (long vs short) */
5347         WMI_10X_VDEV_PARAM_SLOT_TIME,
5348         /* preamble (long vs short) */
5349         WMI_10X_VDEV_PARAM_PREAMBLE,
5350         /* SWBA time (time before tbtt in msec) */
5351         WMI_10X_VDEV_PARAM_SWBA_TIME,
5352         /* time period for updating VDEV stats */
5353         WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5354         /* age out time in msec for frames queued for station in power save */
5355         WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5356         /*
5357          * Host SWBA interval (time in msec before tbtt for SWBA event
5358          * generation).
5359          */
5360         WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5361         /* DTIM period (specified in units of num beacon intervals) */
5362         WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5363         /*
5364          * scheduler air time limit for this VDEV. used by off chan
5365          * scheduler.
5366          */
5367         WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5368         /* enable/disable WDS for this VDEV  */
5369         WMI_10X_VDEV_PARAM_WDS,
5370         /* ATIM Window */
5371         WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5372         /* BMISS max */
5373         WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5374         /* WMM enables/disabled */
5375         WMI_10X_VDEV_PARAM_FEATURE_WMM,
5376         /* Channel width */
5377         WMI_10X_VDEV_PARAM_CHWIDTH,
5378         /* Channel Offset */
5379         WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5380         /* Disable HT Protection */
5381         WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5382         /* Quick STA Kickout */
5383         WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5384         /* Rate to be used with Management frames */
5385         WMI_10X_VDEV_PARAM_MGMT_RATE,
5386         /* Protection Mode */
5387         WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5388         /* Fixed rate setting */
5389         WMI_10X_VDEV_PARAM_FIXED_RATE,
5390         /* Short GI Enable/Disable */
5391         WMI_10X_VDEV_PARAM_SGI,
5392         /* Enable LDPC */
5393         WMI_10X_VDEV_PARAM_LDPC,
5394         /* Enable Tx STBC */
5395         WMI_10X_VDEV_PARAM_TX_STBC,
5396         /* Enable Rx STBC */
5397         WMI_10X_VDEV_PARAM_RX_STBC,
5398         /* Intra BSS forwarding  */
5399         WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5400         /* Setting Default xmit key for Vdev */
5401         WMI_10X_VDEV_PARAM_DEF_KEYID,
5402         /* NSS width */
5403         WMI_10X_VDEV_PARAM_NSS,
5404         /* Set the custom rate for the broadcast data frames */
5405         WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5406         /* Set the custom rate (rate-code) for multicast data frames */
5407         WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5408         /* Tx multicast packet indicate Enable/Disable */
5409         WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5410         /* Tx DHCP packet indicate Enable/Disable */
5411         WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5412         /* Enable host inspection of Tx unicast packet to unknown destination */
5413         WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5414
5415         /* The minimum amount of time AP begins to consider STA inactive */
5416         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5417
5418         /*
5419          * An associated STA is considered inactive when there is no recent
5420          * TX/RX activity and no downlink frames are buffered for it. Once a
5421          * STA exceeds the maximum idle inactive time, the AP will send an
5422          * 802.11 data-null as a keep alive to verify the STA is still
5423          * associated. If the STA does ACK the data-null, or if the data-null
5424          * is buffered and the STA does not retrieve it, the STA will be
5425          * considered unresponsive
5426          * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5427          */
5428         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5429
5430         /*
5431          * An associated STA is considered unresponsive if there is no recent
5432          * TX/RX activity and downlink frames are buffered for it. Once a STA
5433          * exceeds the maximum unresponsive time, the AP will send a
5434          * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5435          */
5436         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5437
5438         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5439         WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5440
5441         WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5442         /* Enable/Disable RTS-CTS */
5443         WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5444
5445         WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5446
5447         /* following are available as of firmware 10.2 */
5448         WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5449         WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5450         WMI_10X_VDEV_PARAM_MFPTEST_SET,
5451         WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5452         WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5453         WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5454         WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5455 };
5456
5457 enum wmi_10_4_vdev_param {
5458         WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5459         WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5460         WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5461         WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5462         WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5463         WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5464         WMI_10_4_VDEV_PARAM_SLOT_TIME,
5465         WMI_10_4_VDEV_PARAM_PREAMBLE,
5466         WMI_10_4_VDEV_PARAM_SWBA_TIME,
5467         WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5468         WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5469         WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5470         WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5471         WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5472         WMI_10_4_VDEV_PARAM_WDS,
5473         WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5474         WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5475         WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5476         WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5477         WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5478         WMI_10_4_VDEV_PARAM_CHWIDTH,
5479         WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5480         WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5481         WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5482         WMI_10_4_VDEV_PARAM_MGMT_RATE,
5483         WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5484         WMI_10_4_VDEV_PARAM_FIXED_RATE,
5485         WMI_10_4_VDEV_PARAM_SGI,
5486         WMI_10_4_VDEV_PARAM_LDPC,
5487         WMI_10_4_VDEV_PARAM_TX_STBC,
5488         WMI_10_4_VDEV_PARAM_RX_STBC,
5489         WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5490         WMI_10_4_VDEV_PARAM_DEF_KEYID,
5491         WMI_10_4_VDEV_PARAM_NSS,
5492         WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5493         WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5494         WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5495         WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5496         WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5497         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5498         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5499         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5500         WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5501         WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5502         WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5503         WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5504         WMI_10_4_VDEV_PARAM_TXBF,
5505         WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5506         WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5507         WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5508         WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5509         WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5510         WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5511         WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5512         WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5513         WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5514         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5515         WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5516         WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5517         WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5518         WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5519         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5520         WMI_10_4_VDEV_PARAM_PROXY_STA,
5521         WMI_10_4_VDEV_PARAM_MERU_VC,
5522         WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5523         WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5524         WMI_10_4_VDEV_PARAM_SENSOR_AP,
5525         WMI_10_4_VDEV_PARAM_BEACON_RATE,
5526         WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5527         WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5528         WMI_10_4_VDEV_PARAM_CAPABILITIES,
5529         WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5530         WMI_10_4_VDEV_PARAM_RX_FILTER,
5531         WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5532         WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5533         WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5534         WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5535         WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5536         WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5537         WMI_10_4_VDEV_PARAM_NSS_VHT160,
5538         WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5539         WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5540         WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5541         WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5542         WMI_10_4_VDEV_PARAM_TX_POWER,
5543         WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5544         WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5545 };
5546
5547 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5548
5549 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5550 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5551 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5552 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5553
5554 #define WMI_TXBF_STS_CAP_OFFSET_LSB     4
5555 #define WMI_TXBF_STS_CAP_OFFSET_MASK    0x70
5556 #define WMI_TXBF_CONF_IMPLICIT_BF       BIT(7)
5557 #define WMI_BF_SOUND_DIM_OFFSET_LSB     8
5558 #define WMI_BF_SOUND_DIM_OFFSET_MASK    0xf00
5559
5560 /* slot time long */
5561 #define WMI_VDEV_SLOT_TIME_LONG         0x1
5562 /* slot time short */
5563 #define WMI_VDEV_SLOT_TIME_SHORT        0x2
5564 /* preablbe long */
5565 #define WMI_VDEV_PREAMBLE_LONG          0x1
5566 /* preablbe short */
5567 #define WMI_VDEV_PREAMBLE_SHORT         0x2
5568
5569 enum wmi_start_event_param {
5570         WMI_VDEV_RESP_START_EVENT = 0,
5571         WMI_VDEV_RESP_RESTART_EVENT,
5572 };
5573
5574 struct wmi_vdev_start_response_event {
5575         __le32 vdev_id;
5576         __le32 req_id;
5577         __le32 resp_type; /* %WMI_VDEV_RESP_ */
5578         __le32 status;
5579 } __packed;
5580
5581 struct wmi_vdev_standby_req_event {
5582         /* unique id identifying the VDEV, generated by the caller */
5583         __le32 vdev_id;
5584 } __packed;
5585
5586 struct wmi_vdev_resume_req_event {
5587         /* unique id identifying the VDEV, generated by the caller */
5588         __le32 vdev_id;
5589 } __packed;
5590
5591 struct wmi_vdev_stopped_event {
5592         /* unique id identifying the VDEV, generated by the caller */
5593         __le32 vdev_id;
5594 } __packed;
5595
5596 /*
5597  * common structure used for simple events
5598  * (stopped, resume_req, standby response)
5599  */
5600 struct wmi_vdev_simple_event {
5601         /* unique id identifying the VDEV, generated by the caller */
5602         __le32 vdev_id;
5603 } __packed;
5604
5605 /* VDEV start response status codes */
5606 /* VDEV successfully started */
5607 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS  0x0
5608
5609 /* requested VDEV not found */
5610 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID  0x1
5611
5612 /* unsupported VDEV combination */
5613 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED   0x2
5614
5615 /* TODO: please add more comments if you have in-depth information */
5616 struct wmi_vdev_spectral_conf_cmd {
5617         __le32 vdev_id;
5618
5619         /* number of fft samples to send (0 for infinite) */
5620         __le32 scan_count;
5621         __le32 scan_period;
5622         __le32 scan_priority;
5623
5624         /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5625         __le32 scan_fft_size;
5626         __le32 scan_gc_ena;
5627         __le32 scan_restart_ena;
5628         __le32 scan_noise_floor_ref;
5629         __le32 scan_init_delay;
5630         __le32 scan_nb_tone_thr;
5631         __le32 scan_str_bin_thr;
5632         __le32 scan_wb_rpt_mode;
5633         __le32 scan_rssi_rpt_mode;
5634         __le32 scan_rssi_thr;
5635         __le32 scan_pwr_format;
5636
5637         /* rpt_mode: Format of FFT report to software for spectral scan
5638          * triggered FFTs:
5639          *      0: No FFT report (only spectral scan summary report)
5640          *      1: 2-dword summary of metrics for each completed FFT + spectral
5641          *         scan summary report
5642          *      2: 2-dword summary of metrics for each completed FFT +
5643          *         1x- oversampled bins(in-band) per FFT + spectral scan summary
5644          *         report
5645          *      3: 2-dword summary of metrics for each completed FFT +
5646          *         2x- oversampled bins (all) per FFT + spectral scan summary
5647          */
5648         __le32 scan_rpt_mode;
5649         __le32 scan_bin_scale;
5650         __le32 scan_dbm_adj;
5651         __le32 scan_chn_mask;
5652 } __packed;
5653
5654 struct wmi_vdev_spectral_conf_arg {
5655         u32 vdev_id;
5656         u32 scan_count;
5657         u32 scan_period;
5658         u32 scan_priority;
5659         u32 scan_fft_size;
5660         u32 scan_gc_ena;
5661         u32 scan_restart_ena;
5662         u32 scan_noise_floor_ref;
5663         u32 scan_init_delay;
5664         u32 scan_nb_tone_thr;
5665         u32 scan_str_bin_thr;
5666         u32 scan_wb_rpt_mode;
5667         u32 scan_rssi_rpt_mode;
5668         u32 scan_rssi_thr;
5669         u32 scan_pwr_format;
5670         u32 scan_rpt_mode;
5671         u32 scan_bin_scale;
5672         u32 scan_dbm_adj;
5673         u32 scan_chn_mask;
5674 };
5675
5676 #define WMI_SPECTRAL_ENABLE_DEFAULT              0
5677 #define WMI_SPECTRAL_COUNT_DEFAULT               0
5678 #define WMI_SPECTRAL_PERIOD_DEFAULT             35
5679 #define WMI_SPECTRAL_PRIORITY_DEFAULT            1
5680 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT            7
5681 #define WMI_SPECTRAL_GC_ENA_DEFAULT              1
5682 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT         0
5683 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -96
5684 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT         80
5685 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        12
5686 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         8
5687 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         0
5688 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       0
5689 #define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf0
5690 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          0
5691 #define WMI_SPECTRAL_RPT_MODE_DEFAULT            2
5692 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT           1
5693 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT             1
5694 #define WMI_SPECTRAL_CHN_MASK_DEFAULT            1
5695
5696 struct wmi_vdev_spectral_enable_cmd {
5697         __le32 vdev_id;
5698         __le32 trigger_cmd;
5699         __le32 enable_cmd;
5700 } __packed;
5701
5702 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  1
5703 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    2
5704 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE    1
5705 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE   2
5706
5707 /* Beacon processing related command and event structures */
5708 struct wmi_bcn_tx_hdr {
5709         __le32 vdev_id;
5710         __le32 tx_rate;
5711         __le32 tx_power;
5712         __le32 bcn_len;
5713 } __packed;
5714
5715 struct wmi_bcn_tx_cmd {
5716         struct wmi_bcn_tx_hdr hdr;
5717         u8 *bcn[];
5718 } __packed;
5719
5720 struct wmi_bcn_tx_arg {
5721         u32 vdev_id;
5722         u32 tx_rate;
5723         u32 tx_power;
5724         u32 bcn_len;
5725         const void *bcn;
5726 };
5727
5728 enum wmi_bcn_tx_ref_flags {
5729         WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5730         WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5731 };
5732
5733 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5734  * chainmask yields no beacons on the air at all.
5735  */
5736 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5737
5738 struct wmi_bcn_tx_ref_cmd {
5739         __le32 vdev_id;
5740         __le32 data_len;
5741         /* physical address of the frame - dma pointer */
5742         __le32 data_ptr;
5743         /* id for host to track */
5744         __le32 msdu_id;
5745         /* frame ctrl to setup PPDU desc */
5746         __le32 frame_control;
5747         /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5748         __le32 flags;
5749         /* introduced in 10.2 */
5750         __le32 antenna_mask;
5751 } __packed;
5752
5753 /* Beacon filter */
5754 #define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
5755 #define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
5756 #define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
5757 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5758 #define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
5759
5760 struct wmi_bcn_filter_rx_cmd {
5761         /* Filter ID */
5762         __le32 bcn_filter_id;
5763         /* Filter type - wmi_bcn_filter */
5764         __le32 bcn_filter;
5765         /* Buffer len */
5766         __le32 bcn_filter_len;
5767         /* Filter info (threshold, BSSID, RSSI) */
5768         u8 *bcn_filter_buf;
5769 } __packed;
5770
5771 /* Capabilities and IEs to be passed to firmware */
5772 struct wmi_bcn_prb_info {
5773         /* Capabilities */
5774         __le32 caps;
5775         /* ERP info */
5776         __le32 erp;
5777         /* Advanced capabilities */
5778         /* HT capabilities */
5779         /* HT Info */
5780         /* ibss_dfs */
5781         /* wpa Info */
5782         /* rsn Info */
5783         /* rrm info */
5784         /* ath_ext */
5785         /* app IE */
5786 } __packed;
5787
5788 enum wmi_sta_ps_mode {
5789         /* enable power save for the given STA VDEV */
5790         WMI_STA_PS_MODE_DISABLED = 0,
5791         /* disable power save  for a given STA VDEV */
5792         WMI_STA_PS_MODE_ENABLED = 1,
5793 };
5794
5795 struct wmi_sta_powersave_mode_cmd {
5796         /* unique id identifying the VDEV, generated by the caller */
5797         __le32 vdev_id;
5798
5799         /*
5800          * Power save mode
5801          * (see enum wmi_sta_ps_mode)
5802          */
5803         __le32 sta_ps_mode;
5804 } __packed;
5805
5806 enum wmi_csa_offload_en {
5807         WMI_CSA_OFFLOAD_DISABLE = 0,
5808         WMI_CSA_OFFLOAD_ENABLE = 1,
5809 };
5810
5811 struct wmi_csa_offload_enable_cmd {
5812         __le32 vdev_id;
5813         __le32 csa_offload_enable;
5814 } __packed;
5815
5816 struct wmi_csa_offload_chanswitch_cmd {
5817         __le32 vdev_id;
5818         struct wmi_channel chan;
5819 } __packed;
5820
5821 /*
5822  * This parameter controls the policy for retrieving frames from AP while the
5823  * STA is in sleep state.
5824  *
5825  * Only takes affect if the sta_ps_mode is enabled
5826  */
5827 enum wmi_sta_ps_param_rx_wake_policy {
5828         /*
5829          * Wake up when ever there is an  RX activity on the VDEV. In this mode
5830          * the Power save SM(state machine) will come out of sleep by either
5831          * sending null frame (or) a data frame (with PS==0) in response to TIM
5832          * bit set in the received beacon frame from AP.
5833          */
5834         WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5835
5836         /*
5837          * Here the power save state machine will not wakeup in response to TIM
5838          * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5839          * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
5840          * access categories are delivery-enabled, the station will send a
5841          * UAPSD trigger frame, otherwise it will send a PS-Poll.
5842          */
5843         WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5844 };
5845
5846 /*
5847  * Number of tx frames/beacon  that cause the power save SM to wake up.
5848  *
5849  * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5850  * meaning, It will cause the SM to never wake up. This is useful if you want
5851  * to keep the system to sleep all the time for some kind of test mode . host
5852  * can change this parameter any time.  It will affect at the next tx frame.
5853  */
5854 enum wmi_sta_ps_param_tx_wake_threshold {
5855         WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5856         WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5857
5858         /*
5859          * Values greater than one indicate that many TX attempts per beacon
5860          * interval before the STA will wake up
5861          */
5862 };
5863
5864 /*
5865  * The maximum number of PS-Poll frames the FW will send in response to
5866  * traffic advertised in TIM before waking up (by sending a null frame with PS
5867  * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5868  * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5869  * parameter is used when the RX wake policy is
5870  * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5871  * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5872  */
5873 enum wmi_sta_ps_param_pspoll_count {
5874         WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5875         /*
5876          * Values greater than 0 indicate the maximum number of PS-Poll frames
5877          * FW will send before waking up.
5878          */
5879
5880         /* When u-APSD is enabled the firmware will be very reluctant to exit
5881          * STA PS. This could result in very poor Rx performance with STA doing
5882          * PS-Poll for each and every buffered frame. This value is a bit
5883          * arbitrary.
5884          */
5885         WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5886 };
5887
5888 /*
5889  * This will include the delivery and trigger enabled state for every AC.
5890  * This is the negotiated state with AP. The host MLME needs to set this based
5891  * on AP capability and the state Set in the association request by the
5892  * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5893  */
5894 #define WMI_UAPSD_AC_TYPE_DELI 0
5895 #define WMI_UAPSD_AC_TYPE_TRIG 1
5896
5897 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5898         (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5899
5900 enum wmi_sta_ps_param_uapsd {
5901         WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5902         WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5903         WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5904         WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5905         WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5906         WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5907         WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5908         WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5909 };
5910
5911 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5912
5913 struct wmi_sta_uapsd_auto_trig_param {
5914         __le32 wmm_ac;
5915         __le32 user_priority;
5916         __le32 service_interval;
5917         __le32 suspend_interval;
5918         __le32 delay_interval;
5919 };
5920
5921 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5922         __le32 vdev_id;
5923         struct wmi_mac_addr peer_macaddr;
5924         __le32 num_ac;
5925 };
5926
5927 struct wmi_sta_uapsd_auto_trig_arg {
5928         u32 wmm_ac;
5929         u32 user_priority;
5930         u32 service_interval;
5931         u32 suspend_interval;
5932         u32 delay_interval;
5933 };
5934
5935 enum wmi_sta_powersave_param {
5936         /*
5937          * Controls how frames are retrievd from AP while STA is sleeping
5938          *
5939          * (see enum wmi_sta_ps_param_rx_wake_policy)
5940          */
5941         WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5942
5943         /*
5944          * The STA will go active after this many TX
5945          *
5946          * (see enum wmi_sta_ps_param_tx_wake_threshold)
5947          */
5948         WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5949
5950         /*
5951          * Number of PS-Poll to send before STA wakes up
5952          *
5953          * (see enum wmi_sta_ps_param_pspoll_count)
5954          *
5955          */
5956         WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5957
5958         /*
5959          * TX/RX inactivity time in msec before going to sleep.
5960          *
5961          * The power save SM will monitor tx/rx activity on the VDEV, if no
5962          * activity for the specified msec of the parameter the Power save
5963          * SM will go to sleep.
5964          */
5965         WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5966
5967         /*
5968          * Set uapsd configuration.
5969          *
5970          * (see enum wmi_sta_ps_param_uapsd)
5971          */
5972         WMI_STA_PS_PARAM_UAPSD = 4,
5973 };
5974
5975 struct wmi_sta_powersave_param_cmd {
5976         __le32 vdev_id;
5977         __le32 param_id; /* %WMI_STA_PS_PARAM_ */
5978         __le32 param_value;
5979 } __packed;
5980
5981 /* No MIMO power save */
5982 #define WMI_STA_MIMO_PS_MODE_DISABLE
5983 /* mimo powersave mode static*/
5984 #define WMI_STA_MIMO_PS_MODE_STATIC
5985 /* mimo powersave mode dynamic */
5986 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
5987
5988 struct wmi_sta_mimo_ps_mode_cmd {
5989         /* unique id identifying the VDEV, generated by the caller */
5990         __le32 vdev_id;
5991         /* mimo powersave mode as defined above */
5992         __le32 mimo_pwrsave_mode;
5993 } __packed;
5994
5995 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
5996 enum wmi_ap_ps_param_uapsd {
5997         WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5998         WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5999         WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6000         WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
6001         WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6002         WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
6003         WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6004         WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
6005 };
6006
6007 /* U-APSD maximum service period of peer station */
6008 enum wmi_ap_ps_peer_param_max_sp {
6009         WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6010         WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6011         WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6012         WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6013         MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6014 };
6015
6016 /*
6017  * AP power save parameter
6018  * Set a power save specific parameter for a peer station
6019  */
6020 enum wmi_ap_ps_peer_param {
6021         /* Set uapsd configuration for a given peer.
6022          *
6023          * Include the delivery and trigger enabled state for every AC.
6024          * The host  MLME needs to set this based on AP capability and stations
6025          * request Set in the association request  received from the station.
6026          *
6027          * Lower 8 bits of the value specify the UAPSD configuration.
6028          *
6029          * (see enum wmi_ap_ps_param_uapsd)
6030          * The default value is 0.
6031          */
6032         WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6033
6034         /*
6035          * Set the service period for a UAPSD capable station
6036          *
6037          * The service period from wme ie in the (re)assoc request frame.
6038          *
6039          * (see enum wmi_ap_ps_peer_param_max_sp)
6040          */
6041         WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6042
6043         /* Time in seconds for aging out buffered frames for STA in PS */
6044         WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6045 };
6046
6047 struct wmi_ap_ps_peer_cmd {
6048         /* unique id identifying the VDEV, generated by the caller */
6049         __le32 vdev_id;
6050
6051         /* peer MAC address */
6052         struct wmi_mac_addr peer_macaddr;
6053
6054         /* AP powersave param (see enum wmi_ap_ps_peer_param) */
6055         __le32 param_id;
6056
6057         /* AP powersave param value */
6058         __le32 param_value;
6059 } __packed;
6060
6061 /* 128 clients = 4 words */
6062 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
6063
6064 struct wmi_tim_info {
6065         __le32 tim_len;
6066         __le32 tim_mcast;
6067         __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6068         __le32 tim_changed;
6069         __le32 tim_num_ps_pending;
6070 } __packed;
6071
6072 struct wmi_tim_info_arg {
6073         __le32 tim_len;
6074         __le32 tim_mcast;
6075         const __le32 *tim_bitmap;
6076         __le32 tim_changed;
6077         __le32 tim_num_ps_pending;
6078 } __packed;
6079
6080 /* Maximum number of NOA Descriptors supported */
6081 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6082 #define WMI_P2P_OPPPS_ENABLE_BIT        BIT(0)
6083 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET   1
6084 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
6085
6086 struct wmi_p2p_noa_info {
6087         /* Bit 0 - Flag to indicate an update in NOA schedule
6088          * Bits 7-1 - Reserved
6089          */
6090         u8 changed;
6091         /* NOA index */
6092         u8 index;
6093         /* Bit 0 - Opp PS state of the AP
6094          * Bits 1-7 - Ctwindow in TUs
6095          */
6096         u8 ctwindow_oppps;
6097         /* Number of NOA descriptors */
6098         u8 num_descriptors;
6099
6100         struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6101 } __packed;
6102
6103 struct wmi_bcn_info {
6104         struct wmi_tim_info tim_info;
6105         struct wmi_p2p_noa_info p2p_noa_info;
6106 } __packed;
6107
6108 struct wmi_host_swba_event {
6109         __le32 vdev_map;
6110         struct wmi_bcn_info bcn_info[];
6111 } __packed;
6112
6113 struct wmi_10_2_4_bcn_info {
6114         struct wmi_tim_info tim_info;
6115         /* The 10.2.4 FW doesn't have p2p NOA info */
6116 } __packed;
6117
6118 struct wmi_10_2_4_host_swba_event {
6119         __le32 vdev_map;
6120         struct wmi_10_2_4_bcn_info bcn_info[];
6121 } __packed;
6122
6123 /* 16 words = 512 client + 1 word = for guard */
6124 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6125
6126 struct wmi_10_4_tim_info {
6127         __le32 tim_len;
6128         __le32 tim_mcast;
6129         __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6130         __le32 tim_changed;
6131         __le32 tim_num_ps_pending;
6132 } __packed;
6133
6134 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6135
6136 struct wmi_10_4_p2p_noa_info {
6137         /* Bit 0 - Flag to indicate an update in NOA schedule
6138          * Bits 7-1 - Reserved
6139          */
6140         u8 changed;
6141         /* NOA index */
6142         u8 index;
6143         /* Bit 0 - Opp PS state of the AP
6144          * Bits 1-7 - Ctwindow in TUs
6145          */
6146         u8 ctwindow_oppps;
6147         /* Number of NOA descriptors */
6148         u8 num_descriptors;
6149
6150         struct wmi_p2p_noa_descriptor
6151                 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6152 } __packed;
6153
6154 struct wmi_10_4_bcn_info {
6155         struct wmi_10_4_tim_info tim_info;
6156         struct wmi_10_4_p2p_noa_info p2p_noa_info;
6157 } __packed;
6158
6159 struct wmi_10_4_host_swba_event {
6160         __le32 vdev_map;
6161         struct wmi_10_4_bcn_info bcn_info[];
6162 } __packed;
6163
6164 #define WMI_MAX_AP_VDEV 16
6165
6166 struct wmi_tbtt_offset_event {
6167         __le32 vdev_map;
6168         __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6169 } __packed;
6170
6171 struct wmi_peer_create_cmd {
6172         __le32 vdev_id;
6173         struct wmi_mac_addr peer_macaddr;
6174         __le32 peer_type;
6175 } __packed;
6176
6177 enum wmi_peer_type {
6178         WMI_PEER_TYPE_DEFAULT = 0,
6179         WMI_PEER_TYPE_BSS = 1,
6180         WMI_PEER_TYPE_TDLS = 2,
6181 };
6182
6183 struct wmi_peer_delete_cmd {
6184         __le32 vdev_id;
6185         struct wmi_mac_addr peer_macaddr;
6186 } __packed;
6187
6188 struct wmi_peer_flush_tids_cmd {
6189         __le32 vdev_id;
6190         struct wmi_mac_addr peer_macaddr;
6191         __le32 peer_tid_bitmap;
6192 } __packed;
6193
6194 struct wmi_fixed_rate {
6195         /*
6196          * rate mode . 0: disable fixed rate (auto rate)
6197          *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
6198          *   2: ht20 11n rate  specified as mcs index
6199          *   3: ht40 11n rate  specified as mcs index
6200          */
6201         __le32  rate_mode;
6202         /*
6203          * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6204          * and series 3 is stored at byte 3 (MSB)
6205          */
6206         __le32  rate_series;
6207         /*
6208          * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6209          * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6210          * (MSB)
6211          */
6212         __le32  rate_retries;
6213 } __packed;
6214
6215 struct wmi_peer_fixed_rate_cmd {
6216         /* unique id identifying the VDEV, generated by the caller */
6217         __le32 vdev_id;
6218         /* peer MAC address */
6219         struct wmi_mac_addr peer_macaddr;
6220         /* fixed rate */
6221         struct wmi_fixed_rate peer_fixed_rate;
6222 } __packed;
6223
6224 #define WMI_MGMT_TID    17
6225
6226 struct wmi_addba_clear_resp_cmd {
6227         /* unique id identifying the VDEV, generated by the caller */
6228         __le32 vdev_id;
6229         /* peer MAC address */
6230         struct wmi_mac_addr peer_macaddr;
6231 } __packed;
6232
6233 struct wmi_addba_send_cmd {
6234         /* unique id identifying the VDEV, generated by the caller */
6235         __le32 vdev_id;
6236         /* peer MAC address */
6237         struct wmi_mac_addr peer_macaddr;
6238         /* Tid number */
6239         __le32 tid;
6240         /* Buffer/Window size*/
6241         __le32 buffersize;
6242 } __packed;
6243
6244 struct wmi_delba_send_cmd {
6245         /* unique id identifying the VDEV, generated by the caller */
6246         __le32 vdev_id;
6247         /* peer MAC address */
6248         struct wmi_mac_addr peer_macaddr;
6249         /* Tid number */
6250         __le32 tid;
6251         /* Is Initiator */
6252         __le32 initiator;
6253         /* Reason code */
6254         __le32 reasoncode;
6255 } __packed;
6256
6257 struct wmi_addba_setresponse_cmd {
6258         /* unique id identifying the vdev, generated by the caller */
6259         __le32 vdev_id;
6260         /* peer mac address */
6261         struct wmi_mac_addr peer_macaddr;
6262         /* Tid number */
6263         __le32 tid;
6264         /* status code */
6265         __le32 statuscode;
6266 } __packed;
6267
6268 struct wmi_send_singleamsdu_cmd {
6269         /* unique id identifying the vdev, generated by the caller */
6270         __le32 vdev_id;
6271         /* peer mac address */
6272         struct wmi_mac_addr peer_macaddr;
6273         /* Tid number */
6274         __le32 tid;
6275 } __packed;
6276
6277 enum wmi_peer_smps_state {
6278         WMI_PEER_SMPS_PS_NONE = 0x0,
6279         WMI_PEER_SMPS_STATIC  = 0x1,
6280         WMI_PEER_SMPS_DYNAMIC = 0x2
6281 };
6282
6283 enum wmi_peer_chwidth {
6284         WMI_PEER_CHWIDTH_20MHZ = 0,
6285         WMI_PEER_CHWIDTH_40MHZ = 1,
6286         WMI_PEER_CHWIDTH_80MHZ = 2,
6287         WMI_PEER_CHWIDTH_160MHZ = 3,
6288 };
6289
6290 enum wmi_peer_param {
6291         WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6292         WMI_PEER_AMPDU      = 0x2,
6293         WMI_PEER_AUTHORIZE  = 0x3,
6294         WMI_PEER_CHAN_WIDTH = 0x4,
6295         WMI_PEER_NSS        = 0x5,
6296         WMI_PEER_USE_4ADDR  = 0x6,
6297         WMI_PEER_USE_FIXED_PWR = 0x8,
6298         WMI_PEER_PARAM_FIXED_RATE = 0x9,
6299         WMI_PEER_DEBUG      = 0xa,
6300         WMI_PEER_PHYMODE    = 0xd,
6301         WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */
6302 };
6303
6304 struct wmi_peer_set_param_cmd {
6305         __le32 vdev_id;
6306         struct wmi_mac_addr peer_macaddr;
6307         __le32 param_id;
6308         __le32 param_value;
6309 } __packed;
6310
6311 #define MAX_SUPPORTED_RATES 128
6312
6313 struct wmi_rate_set {
6314         /* total number of rates */
6315         __le32 num_rates;
6316         /*
6317          * rates (each 8bit value) packed into a 32 bit word.
6318          * the rates are filled from least significant byte to most
6319          * significant byte.
6320          */
6321         __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6322 } __packed;
6323
6324 struct wmi_rate_set_arg {
6325         unsigned int num_rates;
6326         u8 rates[MAX_SUPPORTED_RATES];
6327 };
6328
6329 /*
6330  * NOTE: It would bea good idea to represent the Tx MCS
6331  * info in one word and Rx in another word. This is split
6332  * into multiple words for convenience
6333  */
6334 struct wmi_vht_rate_set {
6335         __le32 rx_max_rate; /* Max Rx data rate */
6336         __le32 rx_mcs_set;  /* Negotiated RX VHT rates */
6337         __le32 tx_max_rate; /* Max Tx data rate */
6338         __le32 tx_mcs_set;  /* Negotiated TX VHT rates */
6339 } __packed;
6340
6341 struct wmi_vht_rate_set_arg {
6342         u32 rx_max_rate;
6343         u32 rx_mcs_set;
6344         u32 tx_max_rate;
6345         u32 tx_mcs_set;
6346 };
6347
6348 struct wmi_peer_set_rates_cmd {
6349         /* peer MAC address */
6350         struct wmi_mac_addr peer_macaddr;
6351         /* legacy rate set */
6352         struct wmi_rate_set peer_legacy_rates;
6353         /* ht rate set */
6354         struct wmi_rate_set peer_ht_rates;
6355 } __packed;
6356
6357 struct wmi_peer_set_q_empty_callback_cmd {
6358         /* unique id identifying the VDEV, generated by the caller */
6359         __le32 vdev_id;
6360         /* peer MAC address */
6361         struct wmi_mac_addr peer_macaddr;
6362         __le32 callback_enable;
6363 } __packed;
6364
6365 struct wmi_peer_flags_map {
6366         u32 auth;
6367         u32 qos;
6368         u32 need_ptk_4_way;
6369         u32 need_gtk_2_way;
6370         u32 apsd;
6371         u32 ht;
6372         u32 bw40;
6373         u32 stbc;
6374         u32 ldbc;
6375         u32 dyn_mimops;
6376         u32 static_mimops;
6377         u32 spatial_mux;
6378         u32 vht;
6379         u32 bw80;
6380         u32 vht_2g;
6381         u32 pmf;
6382         u32 bw160;
6383 };
6384
6385 enum wmi_peer_flags {
6386         WMI_PEER_AUTH = 0x00000001,
6387         WMI_PEER_QOS = 0x00000002,
6388         WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6389         WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6390         WMI_PEER_APSD = 0x00000800,
6391         WMI_PEER_HT = 0x00001000,
6392         WMI_PEER_40MHZ = 0x00002000,
6393         WMI_PEER_STBC = 0x00008000,
6394         WMI_PEER_LDPC = 0x00010000,
6395         WMI_PEER_DYN_MIMOPS = 0x00020000,
6396         WMI_PEER_STATIC_MIMOPS = 0x00040000,
6397         WMI_PEER_SPATIAL_MUX = 0x00200000,
6398         WMI_PEER_VHT = 0x02000000,
6399         WMI_PEER_80MHZ = 0x04000000,
6400         WMI_PEER_VHT_2G = 0x08000000,
6401         WMI_PEER_PMF = 0x10000000,
6402         WMI_PEER_160MHZ = 0x20000000
6403 };
6404
6405 enum wmi_10x_peer_flags {
6406         WMI_10X_PEER_AUTH = 0x00000001,
6407         WMI_10X_PEER_QOS = 0x00000002,
6408         WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6409         WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6410         WMI_10X_PEER_APSD = 0x00000800,
6411         WMI_10X_PEER_HT = 0x00001000,
6412         WMI_10X_PEER_40MHZ = 0x00002000,
6413         WMI_10X_PEER_STBC = 0x00008000,
6414         WMI_10X_PEER_LDPC = 0x00010000,
6415         WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6416         WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6417         WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6418         WMI_10X_PEER_VHT = 0x02000000,
6419         WMI_10X_PEER_80MHZ = 0x04000000,
6420         WMI_10X_PEER_160MHZ = 0x20000000
6421 };
6422
6423 enum wmi_10_2_peer_flags {
6424         WMI_10_2_PEER_AUTH = 0x00000001,
6425         WMI_10_2_PEER_QOS = 0x00000002,
6426         WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6427         WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6428         WMI_10_2_PEER_APSD = 0x00000800,
6429         WMI_10_2_PEER_HT = 0x00001000,
6430         WMI_10_2_PEER_40MHZ = 0x00002000,
6431         WMI_10_2_PEER_STBC = 0x00008000,
6432         WMI_10_2_PEER_LDPC = 0x00010000,
6433         WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6434         WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6435         WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6436         WMI_10_2_PEER_VHT = 0x02000000,
6437         WMI_10_2_PEER_80MHZ = 0x04000000,
6438         WMI_10_2_PEER_VHT_2G = 0x08000000,
6439         WMI_10_2_PEER_PMF = 0x10000000,
6440         WMI_10_2_PEER_160MHZ = 0x20000000
6441 };
6442
6443 /*
6444  * Peer rate capabilities.
6445  *
6446  * This is of interest to the ratecontrol
6447  * module which resides in the firmware. The bit definitions are
6448  * consistent with that defined in if_athrate.c.
6449  */
6450 #define WMI_RC_DS_FLAG          0x01
6451 #define WMI_RC_CW40_FLAG        0x02
6452 #define WMI_RC_SGI_FLAG         0x04
6453 #define WMI_RC_HT_FLAG          0x08
6454 #define WMI_RC_RTSCTS_FLAG      0x10
6455 #define WMI_RC_TX_STBC_FLAG     0x20
6456 #define WMI_RC_RX_STBC_FLAG     0xC0
6457 #define WMI_RC_RX_STBC_FLAG_S   6
6458 #define WMI_RC_WEP_TKIP_FLAG    0x100
6459 #define WMI_RC_TS_FLAG          0x200
6460 #define WMI_RC_UAPSD_FLAG       0x400
6461
6462 /* Maximum listen interval supported by hw in units of beacon interval */
6463 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6464
6465 struct wmi_common_peer_assoc_complete_cmd {
6466         struct wmi_mac_addr peer_macaddr;
6467         __le32 vdev_id;
6468         __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6469         __le32 peer_associd; /* 16 LSBs */
6470         __le32 peer_flags;
6471         __le32 peer_caps; /* 16 LSBs */
6472         __le32 peer_listen_intval;
6473         __le32 peer_ht_caps;
6474         __le32 peer_max_mpdu;
6475         __le32 peer_mpdu_density; /* 0..16 */
6476         __le32 peer_rate_caps;
6477         struct wmi_rate_set peer_legacy_rates;
6478         struct wmi_rate_set peer_ht_rates;
6479         __le32 peer_nss; /* num of spatial streams */
6480         __le32 peer_vht_caps;
6481         __le32 peer_phymode;
6482         struct wmi_vht_rate_set peer_vht_rates;
6483 };
6484
6485 struct wmi_main_peer_assoc_complete_cmd {
6486         struct wmi_common_peer_assoc_complete_cmd cmd;
6487
6488         /* HT Operation Element of the peer. Five bytes packed in 2
6489          *  INT32 array and filled from lsb to msb.
6490          */
6491         __le32 peer_ht_info[2];
6492 } __packed;
6493
6494 struct wmi_10_1_peer_assoc_complete_cmd {
6495         struct wmi_common_peer_assoc_complete_cmd cmd;
6496 } __packed;
6497
6498 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6499 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6500 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6501 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6502
6503 struct wmi_10_2_peer_assoc_complete_cmd {
6504         struct wmi_common_peer_assoc_complete_cmd cmd;
6505         __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6506 } __packed;
6507
6508 /* NSS Mapping to FW */
6509 #define WMI_PEER_NSS_MAP_ENABLE BIT(31)
6510 #define WMI_PEER_NSS_160MHZ_MASK        GENMASK(2, 0)
6511 #define WMI_PEER_NSS_80_80MHZ_MASK      GENMASK(5, 3)
6512
6513 struct wmi_10_4_peer_assoc_complete_cmd {
6514         struct wmi_10_2_peer_assoc_complete_cmd cmd;
6515         __le32 peer_bw_rxnss_override;
6516 } __packed;
6517
6518 struct wmi_peer_assoc_complete_arg {
6519         u8 addr[ETH_ALEN];
6520         u32 vdev_id;
6521         bool peer_reassoc;
6522         u16 peer_aid;
6523         u32 peer_flags; /* see %WMI_PEER_ */
6524         u16 peer_caps;
6525         u32 peer_listen_intval;
6526         u32 peer_ht_caps;
6527         u32 peer_max_mpdu;
6528         u32 peer_mpdu_density; /* 0..16 */
6529         u32 peer_rate_caps; /* see %WMI_RC_ */
6530         struct wmi_rate_set_arg peer_legacy_rates;
6531         struct wmi_rate_set_arg peer_ht_rates;
6532         u32 peer_num_spatial_streams;
6533         u32 peer_vht_caps;
6534         enum wmi_phy_mode peer_phymode;
6535         struct wmi_vht_rate_set_arg peer_vht_rates;
6536         u32 peer_bw_rxnss_override;
6537 };
6538
6539 struct wmi_peer_add_wds_entry_cmd {
6540         /* peer MAC address */
6541         struct wmi_mac_addr peer_macaddr;
6542         /* wds MAC addr */
6543         struct wmi_mac_addr wds_macaddr;
6544 } __packed;
6545
6546 struct wmi_peer_remove_wds_entry_cmd {
6547         /* wds MAC addr */
6548         struct wmi_mac_addr wds_macaddr;
6549 } __packed;
6550
6551 struct wmi_peer_q_empty_callback_event {
6552         /* peer MAC address */
6553         struct wmi_mac_addr peer_macaddr;
6554 } __packed;
6555
6556 /*
6557  * Channel info WMI event
6558  */
6559 struct wmi_chan_info_event {
6560         __le32 err_code;
6561         __le32 freq;
6562         __le32 cmd_flags;
6563         __le32 noise_floor;
6564         __le32 rx_clear_count;
6565         __le32 cycle_count;
6566 } __packed;
6567
6568 struct wmi_10_4_chan_info_event {
6569         __le32 err_code;
6570         __le32 freq;
6571         __le32 cmd_flags;
6572         __le32 noise_floor;
6573         __le32 rx_clear_count;
6574         __le32 cycle_count;
6575         __le32 chan_tx_pwr_range;
6576         __le32 chan_tx_pwr_tp;
6577         __le32 rx_frame_count;
6578 } __packed;
6579
6580 struct wmi_peer_sta_kickout_event {
6581         struct wmi_mac_addr peer_macaddr;
6582 } __packed;
6583
6584 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6585 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6586
6587 /* Beacon filter wmi command info */
6588 #define BCN_FLT_MAX_SUPPORTED_IES       256
6589 #define BCN_FLT_MAX_ELEMS_IE_LIST       (BCN_FLT_MAX_SUPPORTED_IES / 32)
6590
6591 struct bss_bcn_stats {
6592         __le32 vdev_id;
6593         __le32 bss_bcnsdropped;
6594         __le32 bss_bcnsdelivered;
6595 } __packed;
6596
6597 struct bcn_filter_stats {
6598         __le32 bcns_dropped;
6599         __le32 bcns_delivered;
6600         __le32 activefilters;
6601         struct bss_bcn_stats bss_stats;
6602 } __packed;
6603
6604 struct wmi_add_bcn_filter_cmd {
6605         u32 vdev_id;
6606         u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6607 } __packed;
6608
6609 enum wmi_sta_keepalive_method {
6610         WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6611         WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6612 };
6613
6614 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6615
6616 /* Firmware crashes if keepalive interval exceeds this limit */
6617 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6618
6619 /* note: ip4 addresses are in network byte order, i.e. big endian */
6620 struct wmi_sta_keepalive_arp_resp {
6621         __be32 src_ip4_addr;
6622         __be32 dest_ip4_addr;
6623         struct wmi_mac_addr dest_mac_addr;
6624 } __packed;
6625
6626 struct wmi_sta_keepalive_cmd {
6627         __le32 vdev_id;
6628         __le32 enabled;
6629         __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6630         __le32 interval; /* in seconds */
6631         struct wmi_sta_keepalive_arp_resp arp_resp;
6632 } __packed;
6633
6634 struct wmi_sta_keepalive_arg {
6635         u32 vdev_id;
6636         u32 enabled;
6637         u32 method;
6638         u32 interval;
6639         __be32 src_ip4_addr;
6640         __be32 dest_ip4_addr;
6641         const u8 dest_mac_addr[ETH_ALEN];
6642 };
6643
6644 enum wmi_force_fw_hang_type {
6645         WMI_FORCE_FW_HANG_ASSERT = 1,
6646         WMI_FORCE_FW_HANG_NO_DETECT,
6647         WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6648         WMI_FORCE_FW_HANG_EMPTY_POINT,
6649         WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6650         WMI_FORCE_FW_HANG_INFINITE_LOOP,
6651 };
6652
6653 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6654
6655 struct wmi_force_fw_hang_cmd {
6656         __le32 type;
6657         __le32 delay_ms;
6658 } __packed;
6659
6660 enum wmi_pdev_reset_mode_type {
6661         WMI_RST_MODE_TX_FLUSH = 1,
6662         WMI_RST_MODE_WARM_RESET,
6663         WMI_RST_MODE_COLD_RESET,
6664         WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6665         WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6666         WMI_RST_MODE_MAX,
6667 };
6668
6669 enum ath10k_dbglog_level {
6670         ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6671         ATH10K_DBGLOG_LEVEL_INFO = 1,
6672         ATH10K_DBGLOG_LEVEL_WARN = 2,
6673         ATH10K_DBGLOG_LEVEL_ERR = 3,
6674 };
6675
6676 /* VAP ids to enable dbglog */
6677 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB           0
6678 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK          0x0000ffff
6679
6680 /* to enable dbglog in the firmware */
6681 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB  16
6682 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6683
6684 /* timestamp resolution */
6685 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB        17
6686 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK       0x000E0000
6687
6688 /* number of queued messages before sending them to the host */
6689 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB       20
6690 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK      0x0ff00000
6691
6692 /*
6693  * Log levels to enable. This defines the minimum level to enable, this is
6694  * not a bitmask. See enum ath10k_dbglog_level for the values.
6695  */
6696 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB           28
6697 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK          0x70000000
6698
6699 /*
6700  * Note: this is a cleaned up version of a struct firmware uses. For
6701  * example, config_valid was hidden inside an array.
6702  */
6703 struct wmi_dbglog_cfg_cmd {
6704         /* bitmask to hold mod id config*/
6705         __le32 module_enable;
6706
6707         /* see ATH10K_DBGLOG_CFG_ */
6708         __le32 config_enable;
6709
6710         /* mask of module id bits to be changed */
6711         __le32 module_valid;
6712
6713         /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6714         __le32 config_valid;
6715 } __packed;
6716
6717 struct wmi_10_4_dbglog_cfg_cmd {
6718         /* bitmask to hold mod id config*/
6719         __le64 module_enable;
6720
6721         /* see ATH10K_DBGLOG_CFG_ */
6722         __le32 config_enable;
6723
6724         /* mask of module id bits to be changed */
6725         __le64 module_valid;
6726
6727         /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6728         __le32 config_valid;
6729 } __packed;
6730
6731 enum wmi_roam_reason {
6732         WMI_ROAM_REASON_BETTER_AP = 1,
6733         WMI_ROAM_REASON_BEACON_MISS = 2,
6734         WMI_ROAM_REASON_LOW_RSSI = 3,
6735         WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6736         WMI_ROAM_REASON_HO_FAILED = 5,
6737
6738         /* keep last */
6739         WMI_ROAM_REASON_MAX,
6740 };
6741
6742 struct wmi_roam_ev {
6743         __le32 vdev_id;
6744         __le32 reason;
6745 } __packed;
6746
6747 #define ATH10K_FRAGMT_THRESHOLD_MIN     540
6748 #define ATH10K_FRAGMT_THRESHOLD_MAX     2346
6749
6750 #define WMI_MAX_EVENT 0x1000
6751 /* Maximum number of pending TXed WMI packets */
6752 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6753
6754 /* By default disable power save for IBSS */
6755 #define ATH10K_DEFAULT_ATIM 0
6756
6757 #define WMI_MAX_MEM_REQS 16
6758
6759 struct wmi_scan_ev_arg {
6760         __le32 event_type; /* %WMI_SCAN_EVENT_ */
6761         __le32 reason; /* %WMI_SCAN_REASON_ */
6762         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6763         __le32 scan_req_id;
6764         __le32 scan_id;
6765         __le32 vdev_id;
6766 };
6767
6768 struct mgmt_tx_compl_params {
6769         u32 desc_id;
6770         u32 status;
6771         u32 ppdu_id;
6772         int ack_rssi;
6773 };
6774
6775 struct wmi_tlv_mgmt_tx_compl_ev_arg {
6776         __le32 desc_id;
6777         __le32 status;
6778         __le32 pdev_id;
6779         __le32 ppdu_id;
6780         __le32 ack_rssi;
6781 };
6782
6783 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6784         __le32 num_reports;
6785         const __le32 *desc_ids;
6786         const __le32 *status;
6787         const __le32 *ppdu_ids;
6788         const __le32 *ack_rssi;
6789 };
6790
6791 struct wmi_peer_delete_resp_ev_arg {
6792         __le32 vdev_id;
6793         struct wmi_mac_addr peer_addr;
6794 };
6795
6796 #define WMI_MGMT_RX_NUM_RSSI 4
6797 struct wmi_mgmt_rx_ev_arg {
6798         __le32 channel;
6799         __le32 snr;
6800         __le32 rate;
6801         __le32 phy_mode;
6802         __le32 buf_len;
6803         __le32 status; /* %WMI_RX_STATUS_ */
6804         struct wmi_mgmt_rx_ext_info ext_info;
6805         __le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6806 };
6807
6808 struct wmi_ch_info_ev_arg {
6809         __le32 err_code;
6810         __le32 freq;
6811         __le32 cmd_flags;
6812         __le32 noise_floor;
6813         __le32 rx_clear_count;
6814         __le32 cycle_count;
6815         __le32 chan_tx_pwr_range;
6816         __le32 chan_tx_pwr_tp;
6817         __le32 rx_frame_count;
6818         __le32 my_bss_rx_cycle_count;
6819         __le32 rx_11b_mode_data_duration;
6820         __le32 tx_frame_cnt;
6821         __le32 mac_clk_mhz;
6822 };
6823
6824 /* From 10.4 firmware, not sure all have the same values. */
6825 enum wmi_vdev_start_status {
6826         WMI_VDEV_START_OK = 0,
6827         WMI_VDEV_START_CHAN_INVALID,
6828 };
6829
6830 struct wmi_vdev_start_ev_arg {
6831         __le32 vdev_id;
6832         __le32 req_id;
6833         __le32 resp_type; /* %WMI_VDEV_RESP_ */
6834         __le32 status; /* See wmi_vdev_start_status enum above */
6835 };
6836
6837 struct wmi_peer_kick_ev_arg {
6838         const u8 *mac_addr;
6839 };
6840
6841 struct wmi_swba_ev_arg {
6842         __le32 vdev_map;
6843         struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6844         const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6845 };
6846
6847 struct wmi_phyerr_ev_arg {
6848         u32 tsf_timestamp;
6849         u16 freq1;
6850         u16 freq2;
6851         u8 rssi_combined;
6852         u8 chan_width_mhz;
6853         u8 phy_err_code;
6854         u16 nf_chains[4];
6855         u32 buf_len;
6856         const u8 *buf;
6857         u8 hdr_len;
6858 };
6859
6860 struct wmi_phyerr_hdr_arg {
6861         u32 num_phyerrs;
6862         u32 tsf_l32;
6863         u32 tsf_u32;
6864         u32 buf_len;
6865         const void *phyerrs;
6866 };
6867
6868 struct wmi_dfs_status_ev_arg {
6869         u32 status;
6870 };
6871
6872 struct wmi_svc_rdy_ev_arg {
6873         __le32 min_tx_power;
6874         __le32 max_tx_power;
6875         __le32 ht_cap;
6876         __le32 vht_cap;
6877         __le32 vht_supp_mcs;
6878         __le32 sw_ver0;
6879         __le32 sw_ver1;
6880         __le32 fw_build;
6881         __le32 phy_capab;
6882         __le32 num_rf_chains;
6883         __le32 eeprom_rd;
6884         __le32 num_mem_reqs;
6885         __le32 low_2ghz_chan;
6886         __le32 high_2ghz_chan;
6887         __le32 low_5ghz_chan;
6888         __le32 high_5ghz_chan;
6889         __le32 sys_cap_info;
6890         const __le32 *service_map;
6891         size_t service_map_len;
6892         const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6893 };
6894
6895 struct wmi_svc_avail_ev_arg {
6896         bool service_map_ext_valid;
6897         __le32 service_map_ext_len;
6898         const __le32 *service_map_ext;
6899 };
6900
6901 struct wmi_rdy_ev_arg {
6902         __le32 sw_version;
6903         __le32 abi_version;
6904         __le32 status;
6905         const u8 *mac_addr;
6906 };
6907
6908 struct wmi_roam_ev_arg {
6909         __le32 vdev_id;
6910         __le32 reason;
6911         __le32 rssi;
6912 };
6913
6914 struct wmi_echo_ev_arg {
6915         __le32 value;
6916 };
6917
6918 struct wmi_pdev_temperature_event {
6919         /* temperature value in Celsius degree */
6920         __le32 temperature;
6921 } __packed;
6922
6923 struct wmi_pdev_bss_chan_info_event {
6924         __le32 freq;
6925         __le32 noise_floor;
6926         __le64 cycle_busy;
6927         __le64 cycle_total;
6928         __le64 cycle_tx;
6929         __le64 cycle_rx;
6930         __le64 cycle_rx_bss;
6931         __le32 reserved;
6932 } __packed;
6933
6934 /* WOW structures */
6935 enum wmi_wow_wakeup_event {
6936         WOW_BMISS_EVENT = 0,
6937         WOW_BETTER_AP_EVENT,
6938         WOW_DEAUTH_RECVD_EVENT,
6939         WOW_MAGIC_PKT_RECVD_EVENT,
6940         WOW_GTK_ERR_EVENT,
6941         WOW_FOURWAY_HSHAKE_EVENT,
6942         WOW_EAPOL_RECVD_EVENT,
6943         WOW_NLO_DETECTED_EVENT,
6944         WOW_DISASSOC_RECVD_EVENT,
6945         WOW_PATTERN_MATCH_EVENT,
6946         WOW_CSA_IE_EVENT,
6947         WOW_PROBE_REQ_WPS_IE_EVENT,
6948         WOW_AUTH_REQ_EVENT,
6949         WOW_ASSOC_REQ_EVENT,
6950         WOW_HTT_EVENT,
6951         WOW_RA_MATCH_EVENT,
6952         WOW_HOST_AUTO_SHUTDOWN_EVENT,
6953         WOW_IOAC_MAGIC_EVENT,
6954         WOW_IOAC_SHORT_EVENT,
6955         WOW_IOAC_EXTEND_EVENT,
6956         WOW_IOAC_TIMER_EVENT,
6957         WOW_DFS_PHYERR_RADAR_EVENT,
6958         WOW_BEACON_EVENT,
6959         WOW_CLIENT_KICKOUT_EVENT,
6960         WOW_EVENT_MAX,
6961 };
6962
6963 #define C2S(x) case x: return #x
6964
6965 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6966 {
6967         switch (ev) {
6968         C2S(WOW_BMISS_EVENT);
6969         C2S(WOW_BETTER_AP_EVENT);
6970         C2S(WOW_DEAUTH_RECVD_EVENT);
6971         C2S(WOW_MAGIC_PKT_RECVD_EVENT);
6972         C2S(WOW_GTK_ERR_EVENT);
6973         C2S(WOW_FOURWAY_HSHAKE_EVENT);
6974         C2S(WOW_EAPOL_RECVD_EVENT);
6975         C2S(WOW_NLO_DETECTED_EVENT);
6976         C2S(WOW_DISASSOC_RECVD_EVENT);
6977         C2S(WOW_PATTERN_MATCH_EVENT);
6978         C2S(WOW_CSA_IE_EVENT);
6979         C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
6980         C2S(WOW_AUTH_REQ_EVENT);
6981         C2S(WOW_ASSOC_REQ_EVENT);
6982         C2S(WOW_HTT_EVENT);
6983         C2S(WOW_RA_MATCH_EVENT);
6984         C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
6985         C2S(WOW_IOAC_MAGIC_EVENT);
6986         C2S(WOW_IOAC_SHORT_EVENT);
6987         C2S(WOW_IOAC_EXTEND_EVENT);
6988         C2S(WOW_IOAC_TIMER_EVENT);
6989         C2S(WOW_DFS_PHYERR_RADAR_EVENT);
6990         C2S(WOW_BEACON_EVENT);
6991         C2S(WOW_CLIENT_KICKOUT_EVENT);
6992         C2S(WOW_EVENT_MAX);
6993         default:
6994                 return NULL;
6995         }
6996 }
6997
6998 enum wmi_wow_wake_reason {
6999         WOW_REASON_UNSPECIFIED = -1,
7000         WOW_REASON_NLOD = 0,
7001         WOW_REASON_AP_ASSOC_LOST,
7002         WOW_REASON_LOW_RSSI,
7003         WOW_REASON_DEAUTH_RECVD,
7004         WOW_REASON_DISASSOC_RECVD,
7005         WOW_REASON_GTK_HS_ERR,
7006         WOW_REASON_EAP_REQ,
7007         WOW_REASON_FOURWAY_HS_RECV,
7008         WOW_REASON_TIMER_INTR_RECV,
7009         WOW_REASON_PATTERN_MATCH_FOUND,
7010         WOW_REASON_RECV_MAGIC_PATTERN,
7011         WOW_REASON_P2P_DISC,
7012         WOW_REASON_WLAN_HB,
7013         WOW_REASON_CSA_EVENT,
7014         WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7015         WOW_REASON_AUTH_REQ_RECV,
7016         WOW_REASON_ASSOC_REQ_RECV,
7017         WOW_REASON_HTT_EVENT,
7018         WOW_REASON_RA_MATCH,
7019         WOW_REASON_HOST_AUTO_SHUTDOWN,
7020         WOW_REASON_IOAC_MAGIC_EVENT,
7021         WOW_REASON_IOAC_SHORT_EVENT,
7022         WOW_REASON_IOAC_EXTEND_EVENT,
7023         WOW_REASON_IOAC_TIMER_EVENT,
7024         WOW_REASON_ROAM_HO,
7025         WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7026         WOW_REASON_BEACON_RECV,
7027         WOW_REASON_CLIENT_KICKOUT_EVENT,
7028         WOW_REASON_DEBUG_TEST = 0xFF,
7029 };
7030
7031 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7032 {
7033         switch (reason) {
7034         C2S(WOW_REASON_UNSPECIFIED);
7035         C2S(WOW_REASON_NLOD);
7036         C2S(WOW_REASON_AP_ASSOC_LOST);
7037         C2S(WOW_REASON_LOW_RSSI);
7038         C2S(WOW_REASON_DEAUTH_RECVD);
7039         C2S(WOW_REASON_DISASSOC_RECVD);
7040         C2S(WOW_REASON_GTK_HS_ERR);
7041         C2S(WOW_REASON_EAP_REQ);
7042         C2S(WOW_REASON_FOURWAY_HS_RECV);
7043         C2S(WOW_REASON_TIMER_INTR_RECV);
7044         C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7045         C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7046         C2S(WOW_REASON_P2P_DISC);
7047         C2S(WOW_REASON_WLAN_HB);
7048         C2S(WOW_REASON_CSA_EVENT);
7049         C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7050         C2S(WOW_REASON_AUTH_REQ_RECV);
7051         C2S(WOW_REASON_ASSOC_REQ_RECV);
7052         C2S(WOW_REASON_HTT_EVENT);
7053         C2S(WOW_REASON_RA_MATCH);
7054         C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7055         C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7056         C2S(WOW_REASON_IOAC_SHORT_EVENT);
7057         C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7058         C2S(WOW_REASON_IOAC_TIMER_EVENT);
7059         C2S(WOW_REASON_ROAM_HO);
7060         C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7061         C2S(WOW_REASON_BEACON_RECV);
7062         C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7063         C2S(WOW_REASON_DEBUG_TEST);
7064         default:
7065                 return NULL;
7066         }
7067 }
7068
7069 #undef C2S
7070
7071 struct wmi_wow_ev_arg {
7072         u32 vdev_id;
7073         u32 flag;
7074         enum wmi_wow_wake_reason wake_reason;
7075         u32 data_len;
7076 };
7077
7078 #define WOW_MIN_PATTERN_SIZE    1
7079 #define WOW_MAX_PATTERN_SIZE    148
7080 #define WOW_MAX_PKT_OFFSET      128
7081 #define WOW_HDR_LEN     (sizeof(struct ieee80211_hdr_3addr) + \
7082         sizeof(struct rfc1042_hdr))
7083 #define WOW_MAX_REDUCE  (WOW_HDR_LEN - sizeof(struct ethhdr) - \
7084         offsetof(struct ieee80211_hdr_3addr, addr1))
7085
7086 enum wmi_tdls_state {
7087         WMI_TDLS_DISABLE,
7088         WMI_TDLS_ENABLE_PASSIVE,
7089         WMI_TDLS_ENABLE_ACTIVE,
7090         WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7091 };
7092
7093 enum wmi_tdls_peer_state {
7094         WMI_TDLS_PEER_STATE_PEERING,
7095         WMI_TDLS_PEER_STATE_CONNECTED,
7096         WMI_TDLS_PEER_STATE_TEARDOWN,
7097 };
7098
7099 struct wmi_tdls_peer_update_cmd_arg {
7100         u32 vdev_id;
7101         enum wmi_tdls_peer_state peer_state;
7102         u8 addr[ETH_ALEN];
7103 };
7104
7105 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7106
7107 #define WMI_TDLS_PEER_SP_MASK   0x60
7108 #define WMI_TDLS_PEER_SP_LSB    5
7109
7110 enum wmi_tdls_options {
7111         WMI_TDLS_OFFCHAN_EN = BIT(0),
7112         WMI_TDLS_BUFFER_STA_EN = BIT(1),
7113         WMI_TDLS_SLEEP_STA_EN = BIT(2),
7114 };
7115
7116 enum {
7117         WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7118         WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7119         WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7120         WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7121 };
7122
7123 struct wmi_tdls_peer_capab_arg {
7124         u8 peer_uapsd_queues;
7125         u8 peer_max_sp;
7126         u32 buff_sta_support;
7127         u32 off_chan_support;
7128         u32 peer_curr_operclass;
7129         u32 self_curr_operclass;
7130         u32 peer_chan_len;
7131         u32 peer_operclass_len;
7132         u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7133         u32 is_peer_responder;
7134         u32 pref_offchan_num;
7135         u32 pref_offchan_bw;
7136 };
7137
7138 struct wmi_10_4_tdls_set_state_cmd {
7139         __le32 vdev_id;
7140         __le32 state;
7141         __le32 notification_interval_ms;
7142         __le32 tx_discovery_threshold;
7143         __le32 tx_teardown_threshold;
7144         __le32 rssi_teardown_threshold;
7145         __le32 rssi_delta;
7146         __le32 tdls_options;
7147         __le32 tdls_peer_traffic_ind_window;
7148         __le32 tdls_peer_traffic_response_timeout_ms;
7149         __le32 tdls_puapsd_mask;
7150         __le32 tdls_puapsd_inactivity_time_ms;
7151         __le32 tdls_puapsd_rx_frame_threshold;
7152         __le32 teardown_notification_ms;
7153         __le32 tdls_peer_kickout_threshold;
7154 } __packed;
7155
7156 struct wmi_tdls_peer_capabilities {
7157         __le32 peer_qos;
7158         __le32 buff_sta_support;
7159         __le32 off_chan_support;
7160         __le32 peer_curr_operclass;
7161         __le32 self_curr_operclass;
7162         __le32 peer_chan_len;
7163         __le32 peer_operclass_len;
7164         u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7165         __le32 is_peer_responder;
7166         __le32 pref_offchan_num;
7167         __le32 pref_offchan_bw;
7168         union {
7169                 /* to match legacy implementation allocate room for
7170                  * at least one record even if peer_chan_len is 0
7171                  */
7172                 struct wmi_channel peer_chan_min_allocation;
7173                 DECLARE_FLEX_ARRAY(struct wmi_channel, peer_chan_list);
7174         };
7175 } __packed;
7176
7177 struct wmi_10_4_tdls_peer_update_cmd {
7178         __le32 vdev_id;
7179         struct wmi_mac_addr peer_macaddr;
7180         __le32 peer_state;
7181         __le32 reserved[4];
7182         struct wmi_tdls_peer_capabilities peer_capab;
7183 } __packed;
7184
7185 enum wmi_tdls_peer_reason {
7186         WMI_TDLS_TEARDOWN_REASON_TX,
7187         WMI_TDLS_TEARDOWN_REASON_RSSI,
7188         WMI_TDLS_TEARDOWN_REASON_SCAN,
7189         WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7190         WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7191         WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7192         WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7193         WMI_TDLS_ENTER_BUF_STA,
7194         WMI_TDLS_EXIT_BUF_STA,
7195         WMI_TDLS_ENTER_BT_BUSY_MODE,
7196         WMI_TDLS_EXIT_BT_BUSY_MODE,
7197         WMI_TDLS_SCAN_STARTED_EVENT,
7198         WMI_TDLS_SCAN_COMPLETED_EVENT,
7199 };
7200
7201 enum wmi_tdls_peer_notification {
7202         WMI_TDLS_SHOULD_DISCOVER,
7203         WMI_TDLS_SHOULD_TEARDOWN,
7204         WMI_TDLS_PEER_DISCONNECTED,
7205         WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7206 };
7207
7208 struct wmi_tdls_peer_event {
7209         struct wmi_mac_addr peer_macaddr;
7210         /* see enum wmi_tdls_peer_notification*/
7211         __le32 peer_status;
7212         /* see enum wmi_tdls_peer_reason */
7213         __le32 peer_reason;
7214         __le32 vdev_id;
7215 } __packed;
7216
7217 enum wmi_tid_aggr_control_conf {
7218         WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7219         WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7220         WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7221 };
7222
7223 enum wmi_noack_tid_conf {
7224         WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7225         WMI_PEER_TID_CONFIG_ACK,
7226         WMI_PEER_TID_CONFIG_NOACK,
7227 };
7228
7229 enum wmi_tid_rate_ctrl_conf {
7230         WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7231         WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7232         WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7233         WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7234         WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7235 };
7236
7237 enum wmi_tid_rtscts_control_conf {
7238         WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7239         WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7240 };
7241
7242 enum wmi_ext_tid_config_map {
7243         WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7244 };
7245
7246 struct wmi_per_peer_per_tid_cfg_arg {
7247         u32 vdev_id;
7248         struct wmi_mac_addr peer_macaddr;
7249         u32 tid;
7250         enum wmi_noack_tid_conf ack_policy;
7251         enum wmi_tid_aggr_control_conf aggr_control;
7252         u8 rate_ctrl;
7253         u32 retry_count;
7254         u32 rcode_flags;
7255         u32 ext_tid_cfg_bitmap;
7256         u32 rtscts_ctrl;
7257 };
7258
7259 struct wmi_peer_per_tid_cfg_cmd {
7260         __le32 vdev_id;
7261         struct wmi_mac_addr peer_macaddr;
7262         __le32 tid;
7263
7264         /* see enum wmi_noack_tid_conf */
7265         __le32 ack_policy;
7266
7267         /* see enum wmi_tid_aggr_control_conf */
7268         __le32 aggr_control;
7269
7270         /* see enum wmi_tid_rate_ctrl_conf */
7271         __le32 rate_control;
7272         __le32 rcode_flags;
7273         __le32 retry_count;
7274
7275         /* See enum wmi_ext_tid_config_map */
7276         __le32 ext_tid_cfg_bitmap;
7277
7278         /* see enum wmi_tid_rtscts_control_conf */
7279         __le32 rtscts_ctrl;
7280 } __packed;
7281
7282 enum wmi_txbf_conf {
7283         WMI_TXBF_CONF_UNSUPPORTED,
7284         WMI_TXBF_CONF_BEFORE_ASSOC,
7285         WMI_TXBF_CONF_AFTER_ASSOC,
7286 };
7287
7288 #define WMI_CCA_DETECT_LEVEL_AUTO       0
7289 #define WMI_CCA_DETECT_MARGIN_AUTO      0
7290
7291 struct wmi_pdev_set_adaptive_cca_params {
7292         __le32 enable;
7293         __le32 cca_detect_level;
7294         __le32 cca_detect_margin;
7295 } __packed;
7296
7297 #define WMI_PNO_MAX_SCHED_SCAN_PLANS      2
7298 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT   7200
7299 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7300 #define WMI_PNO_MAX_NETW_CHANNELS         26
7301 #define WMI_PNO_MAX_NETW_CHANNELS_EX      60
7302 #define WMI_PNO_MAX_SUPP_NETWORKS         WLAN_SCAN_PARAMS_MAX_SSID
7303 #define WMI_PNO_MAX_IE_LENGTH             WLAN_SCAN_PARAMS_MAX_IE_LEN
7304
7305 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7306 #define WMI_PNO_MAX_PB_REQ_SIZE    450
7307
7308 #define WMI_PNO_24G_DEFAULT_CH     1
7309 #define WMI_PNO_5G_DEFAULT_CH      36
7310
7311 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7312 #define WMI_PASSIVE_MAX_CHANNEL_TIME   110
7313
7314 /* SSID broadcast type */
7315 enum wmi_SSID_bcast_type {
7316         BCAST_UNKNOWN      = 0,
7317         BCAST_NORMAL       = 1,
7318         BCAST_HIDDEN       = 2,
7319 };
7320
7321 struct wmi_network_type {
7322         struct wmi_ssid ssid;
7323         u32 authentication;
7324         u32 encryption;
7325         u32 bcast_nw_type;
7326         u8 channel_count;
7327         u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7328         s32 rssi_threshold;
7329 } __packed;
7330
7331 struct wmi_pno_scan_req {
7332         u8 enable;
7333         u8 vdev_id;
7334         u8 uc_networks_count;
7335         struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7336         u32 fast_scan_period;
7337         u32 slow_scan_period;
7338         u8 fast_scan_max_cycles;
7339
7340         bool do_passive_scan;
7341
7342         u32 delay_start_time;
7343         u32 active_min_time;
7344         u32 active_max_time;
7345         u32 passive_min_time;
7346         u32 passive_max_time;
7347
7348         /* mac address randomization attributes */
7349         u32 enable_pno_scan_randomization;
7350         u8 mac_addr[ETH_ALEN];
7351         u8 mac_addr_mask[ETH_ALEN];
7352 } __packed;
7353
7354 enum wmi_host_platform_type {
7355         WMI_HOST_PLATFORM_HIGH_PERF,
7356         WMI_HOST_PLATFORM_LOW_PERF,
7357 };
7358
7359 enum wmi_bss_survey_req_type {
7360         WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7361         WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7362 };
7363
7364 struct wmi_pdev_chan_info_req_cmd {
7365         __le32 type;
7366         __le32 reserved;
7367 } __packed;
7368
7369 /* bb timing register configurations */
7370 struct wmi_bb_timing_cfg_arg {
7371         /* Tx_end to pa off timing */
7372         u32 bb_tx_timing;
7373
7374         /* Tx_end to external pa off timing */
7375         u32 bb_xpa_timing;
7376 };
7377
7378 struct wmi_pdev_bb_timing_cfg_cmd {
7379         /* Tx_end to pa off timing */
7380         __le32 bb_tx_timing;
7381
7382         /* Tx_end to external pa off timing */
7383         __le32 bb_xpa_timing;
7384 } __packed;
7385
7386 struct ath10k;
7387 struct ath10k_vif;
7388 struct ath10k_fw_stats_pdev;
7389 struct ath10k_fw_stats_peer;
7390 struct ath10k_fw_stats;
7391
7392 int ath10k_wmi_attach(struct ath10k *ar);
7393 void ath10k_wmi_detach(struct ath10k *ar);
7394 void ath10k_wmi_free_host_mem(struct ath10k *ar);
7395 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7396 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7397
7398 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7399 int ath10k_wmi_connect(struct ath10k *ar);
7400
7401 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7402 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7403                                u32 cmd_id);
7404 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7405
7406 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7407                                      struct ath10k_fw_stats_pdev *dst);
7408 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7409                                    struct ath10k_fw_stats_pdev *dst);
7410 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7411                                    struct ath10k_fw_stats_pdev *dst);
7412 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7413                                       struct ath10k_fw_stats_pdev *dst);
7414 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7415                                 struct ath10k_fw_stats_peer *dst);
7416 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7417                                     struct wmi_host_mem_chunks *chunks);
7418 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7419                                       const struct wmi_start_scan_arg *arg);
7420 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7421                               const struct wmi_wmm_params_arg *arg);
7422 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7423                                 const struct wmi_channel_arg *arg);
7424 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7425
7426 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7427 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7428 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7429 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7430 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7431 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7432 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7433 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7434 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7435 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7436 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7437 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7438 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7439 void ath10k_wmi_event_dfs(struct ath10k *ar,
7440                           struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7441 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7442                                     struct wmi_phyerr_ev_arg *phyerr,
7443                                     u64 tsf);
7444 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7445 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7446 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7447 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7448 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7449 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7450 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7451                                              struct sk_buff *skb);
7452 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7453                                              struct sk_buff *skb);
7454 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7455 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7456 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7457 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7458 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7459 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7460                                          struct sk_buff *skb);
7461 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7462 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7463 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7464 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7465                                                 struct sk_buff *skb);
7466 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7467 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7468 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7469 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7470 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7471 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7472 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7473                                  int left_len, struct wmi_phyerr_ev_arg *arg);
7474 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7475                                       struct ath10k_fw_stats *fw_stats,
7476                                       char *buf);
7477 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7478                                      struct ath10k_fw_stats *fw_stats,
7479                                      char *buf);
7480 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7481                                       struct ath10k_fw_stats *fw_stats,
7482                                       char *buf);
7483 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7484                                    enum wmi_vdev_subtype subtype);
7485 int ath10k_wmi_barrier(struct ath10k *ar);
7486 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7487                                          u32 num_tx_chain);
7488 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7489
7490 #endif /* _WMI_H_ */