drivers/net/wireless/ath/ath10k/wmi.h

   1 /* SPDX-License-Identifier: ISC */
   2 /*
   3  * Copyright (c) 2005-2011 Atheros Communications Inc.
   4  * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
   5  * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
   6  * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
   7  */
   8
   9 #ifndef _WMI_H_
  10 #define _WMI_H_
  11
  12 #include <linux/types.h>
  13 #include <linux/ieee80211.h>
  14
  15 /*
  16  * This file specifies the WMI interface for the Unified Software
  17  * Architecture.
  18  *
  19  * It includes definitions of all the commands and events. Commands are
  20  * messages from the host to the target. Events and Replies are messages
  21  * from the target to the host.
  22  *
  23  * Ownership of correctness in regards to WMI commands belongs to the host
  24  * driver and the target is not required to validate parameters for value,
  25  * proper range, or any other checking.
  26  *
  27  * Guidelines for extending this interface are below.
  28  *
  29  * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
  30  *
  31  * 2. Use ONLY u32 type for defining member variables within WMI
  32  *    command/event structures. Do not use u8, u16, bool or
  33  *    enum types within these structures.
  34  *
  35  * 3. DO NOT define bit fields within structures. Implement bit fields
  36  *    using masks if necessary. Do not use the programming language's bit
  37  *    field definition.
  38  *
  39  * 4. Define macros for encode/decode of u8, u16 fields within
  40  *    the u32 variables. Use these macros for set/get of these fields.
  41  *    Try to use this to optimize the structure without bloating it with
  42  *    u32 variables for every lower sized field.
  43  *
  44  * 5. Do not use PACK/UNPACK attributes for the structures as each member
  45  *    variable is already 4-byte aligned by virtue of being a u32
  46  *    type.
  47  *
  48  * 6. Comment each parameter part of the WMI command/event structure by
  49  *    using the 2 stars at the beginning of C comment instead of one star to
  50  *    enable HTML document generation using Doxygen.
  51  *
  52  */
  53
  54 /* Control Path */
  55 struct wmi_cmd_hdr {
  56         __le32 cmd_id;
  57 } __packed;
  58
  59 #define WMI_CMD_HDR_CMD_ID_MASK   0x00FFFFFF
  60 #define WMI_CMD_HDR_CMD_ID_LSB    0
  61 #define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
  62 #define WMI_CMD_HDR_PLT_PRIV_LSB  24
  63
  64 #define HTC_PROTOCOL_VERSION    0x0002
  65 #define WMI_PROTOCOL_VERSION    0x0002
  66
  67 /*
  68  * There is no signed version of __le32, so for a temporary solution come
  69  * up with our own version. The idea is from fs/ntfs/endian.h.
  70  *
  71  * Use a_ prefix so that it doesn't conflict if we get proper support to
  72  * linux/types.h.
  73  */
  74 typedef __s32 __bitwise a_sle32;
  75
  76 static inline a_sle32 a_cpu_to_sle32(s32 val)
  77 {
  78         return (__force a_sle32)cpu_to_le32(val);
  79 }
  80
  81 static inline s32 a_sle32_to_cpu(a_sle32 val)
  82 {
  83         return le32_to_cpu((__force __le32)val);
  84 }
  85
  86 enum wmi_service {
  87         WMI_SERVICE_BEACON_OFFLOAD = 0,
  88         WMI_SERVICE_SCAN_OFFLOAD,
  89         WMI_SERVICE_ROAM_OFFLOAD,
  90         WMI_SERVICE_BCN_MISS_OFFLOAD,
  91         WMI_SERVICE_STA_PWRSAVE,
  92         WMI_SERVICE_STA_ADVANCED_PWRSAVE,
  93         WMI_SERVICE_AP_UAPSD,
  94         WMI_SERVICE_AP_DFS,
  95         WMI_SERVICE_11AC,
  96         WMI_SERVICE_BLOCKACK,
  97         WMI_SERVICE_PHYERR,
  98         WMI_SERVICE_BCN_FILTER,
  99         WMI_SERVICE_RTT,
 100         WMI_SERVICE_RATECTRL,
 101         WMI_SERVICE_WOW,
 102         WMI_SERVICE_RATECTRL_CACHE,
 103         WMI_SERVICE_IRAM_TIDS,
 104         WMI_SERVICE_ARPNS_OFFLOAD,
 105         WMI_SERVICE_NLO,
 106         WMI_SERVICE_GTK_OFFLOAD,
 107         WMI_SERVICE_SCAN_SCH,
 108         WMI_SERVICE_CSA_OFFLOAD,
 109         WMI_SERVICE_CHATTER,
 110         WMI_SERVICE_COEX_FREQAVOID,
 111         WMI_SERVICE_PACKET_POWER_SAVE,
 112         WMI_SERVICE_FORCE_FW_HANG,
 113         WMI_SERVICE_GPIO,
 114         WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 115         WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 116         WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 117         WMI_SERVICE_STA_KEEP_ALIVE,
 118         WMI_SERVICE_TX_ENCAP,
 119         WMI_SERVICE_BURST,
 120         WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 121         WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 122         WMI_SERVICE_ROAM_SCAN_OFFLOAD,
 123         WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 124         WMI_SERVICE_EARLY_RX,
 125         WMI_SERVICE_STA_SMPS,
 126         WMI_SERVICE_FWTEST,
 127         WMI_SERVICE_STA_WMMAC,
 128         WMI_SERVICE_TDLS,
 129         WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
 130         WMI_SERVICE_ADAPTIVE_OCS,
 131         WMI_SERVICE_BA_SSN_SUPPORT,
 132         WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
 133         WMI_SERVICE_WLAN_HB,
 134         WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
 135         WMI_SERVICE_BATCH_SCAN,
 136         WMI_SERVICE_QPOWER,
 137         WMI_SERVICE_PLMREQ,
 138         WMI_SERVICE_THERMAL_MGMT,
 139         WMI_SERVICE_RMC,
 140         WMI_SERVICE_MHF_OFFLOAD,
 141         WMI_SERVICE_COEX_SAR,
 142         WMI_SERVICE_BCN_TXRATE_OVERRIDE,
 143         WMI_SERVICE_NAN,
 144         WMI_SERVICE_L1SS_STAT,
 145         WMI_SERVICE_ESTIMATE_LINKSPEED,
 146         WMI_SERVICE_OBSS_SCAN,
 147         WMI_SERVICE_TDLS_OFFCHAN,
 148         WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
 149         WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
 150         WMI_SERVICE_IBSS_PWRSAVE,
 151         WMI_SERVICE_LPASS,
 152         WMI_SERVICE_EXTSCAN,
 153         WMI_SERVICE_D0WOW,
 154         WMI_SERVICE_HSOFFLOAD,
 155         WMI_SERVICE_ROAM_HO_OFFLOAD,
 156         WMI_SERVICE_RX_FULL_REORDER,
 157         WMI_SERVICE_DHCP_OFFLOAD,
 158         WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
 159         WMI_SERVICE_MDNS_OFFLOAD,
 160         WMI_SERVICE_SAP_AUTH_OFFLOAD,
 161         WMI_SERVICE_ATF,
 162         WMI_SERVICE_COEX_GPIO,
 163         WMI_SERVICE_ENHANCED_PROXY_STA,
 164         WMI_SERVICE_TT,
 165         WMI_SERVICE_PEER_CACHING,
 166         WMI_SERVICE_AUX_SPECTRAL_INTF,
 167         WMI_SERVICE_AUX_CHAN_LOAD_INTF,
 168         WMI_SERVICE_BSS_CHANNEL_INFO_64,
 169         WMI_SERVICE_EXT_RES_CFG_SUPPORT,
 170         WMI_SERVICE_MESH_11S,
 171         WMI_SERVICE_MESH_NON_11S,
 172         WMI_SERVICE_PEER_STATS,
 173         WMI_SERVICE_RESTRT_CHNL_SUPPORT,
 174         WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 175         WMI_SERVICE_TX_MODE_PUSH_ONLY,
 176         WMI_SERVICE_TX_MODE_PUSH_PULL,
 177         WMI_SERVICE_TX_MODE_DYNAMIC,
 178         WMI_SERVICE_VDEV_RX_FILTER,
 179         WMI_SERVICE_BTCOEX,
 180         WMI_SERVICE_CHECK_CAL_VERSION,
 181         WMI_SERVICE_DBGLOG_WARN2,
 182         WMI_SERVICE_BTCOEX_DUTY_CYCLE,
 183         WMI_SERVICE_4_WIRE_COEX_SUPPORT,
 184         WMI_SERVICE_EXTENDED_NSS_SUPPORT,
 185         WMI_SERVICE_PROG_GPIO_BAND_SELECT,
 186         WMI_SERVICE_SMART_LOGGING_SUPPORT,
 187         WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 188         WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 189         WMI_SERVICE_MGMT_TX_WMI,
 190         WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
 191         WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 192         WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
 193         WMI_SERVICE_TPC_STATS_FINAL,
 194         WMI_SERVICE_RESET_CHIP,
 195         WMI_SERVICE_SPOOF_MAC_SUPPORT,
 196         WMI_SERVICE_TX_DATA_ACK_RSSI,
 197         WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 198         WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 199         WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 200         WMI_SERVICE_THERM_THROT,
 201         WMI_SERVICE_RTT_RESPONDER_ROLE,
 202         WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
 203         WMI_SERVICE_REPORT_AIRTIME,
 204         WMI_SERVICE_SYNC_DELETE_CMDS,
 205         WMI_SERVICE_TX_PWR_PER_PEER,
 206         WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
 207         WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 208         WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 209
 210         /* Remember to add the new value to wmi_service_name()! */
 211
 212         /* keep last */
 213         WMI_SERVICE_MAX,
 214 };
 215
 216 enum wmi_10x_service {
 217         WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
 218         WMI_10X_SERVICE_SCAN_OFFLOAD,
 219         WMI_10X_SERVICE_ROAM_OFFLOAD,
 220         WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 221         WMI_10X_SERVICE_STA_PWRSAVE,
 222         WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 223         WMI_10X_SERVICE_AP_UAPSD,
 224         WMI_10X_SERVICE_AP_DFS,
 225         WMI_10X_SERVICE_11AC,
 226         WMI_10X_SERVICE_BLOCKACK,
 227         WMI_10X_SERVICE_PHYERR,
 228         WMI_10X_SERVICE_BCN_FILTER,
 229         WMI_10X_SERVICE_RTT,
 230         WMI_10X_SERVICE_RATECTRL,
 231         WMI_10X_SERVICE_WOW,
 232         WMI_10X_SERVICE_RATECTRL_CACHE,
 233         WMI_10X_SERVICE_IRAM_TIDS,
 234         WMI_10X_SERVICE_BURST,
 235
 236         /* introduced in 10.2 */
 237         WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 238         WMI_10X_SERVICE_FORCE_FW_HANG,
 239         WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 240         WMI_10X_SERVICE_ATF,
 241         WMI_10X_SERVICE_COEX_GPIO,
 242         WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 243         WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 244         WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 245         WMI_10X_SERVICE_MESH,
 246         WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 247         WMI_10X_SERVICE_PEER_STATS,
 248         WMI_10X_SERVICE_RESET_CHIP,
 249         WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 250         WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
 251         WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
 252         WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 253 };
 254
 255 enum wmi_main_service {
 256         WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
 257         WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 258         WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 259         WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 260         WMI_MAIN_SERVICE_STA_PWRSAVE,
 261         WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 262         WMI_MAIN_SERVICE_AP_UAPSD,
 263         WMI_MAIN_SERVICE_AP_DFS,
 264         WMI_MAIN_SERVICE_11AC,
 265         WMI_MAIN_SERVICE_BLOCKACK,
 266         WMI_MAIN_SERVICE_PHYERR,
 267         WMI_MAIN_SERVICE_BCN_FILTER,
 268         WMI_MAIN_SERVICE_RTT,
 269         WMI_MAIN_SERVICE_RATECTRL,
 270         WMI_MAIN_SERVICE_WOW,
 271         WMI_MAIN_SERVICE_RATECTRL_CACHE,
 272         WMI_MAIN_SERVICE_IRAM_TIDS,
 273         WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 274         WMI_MAIN_SERVICE_NLO,
 275         WMI_MAIN_SERVICE_GTK_OFFLOAD,
 276         WMI_MAIN_SERVICE_SCAN_SCH,
 277         WMI_MAIN_SERVICE_CSA_OFFLOAD,
 278         WMI_MAIN_SERVICE_CHATTER,
 279         WMI_MAIN_SERVICE_COEX_FREQAVOID,
 280         WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 281         WMI_MAIN_SERVICE_FORCE_FW_HANG,
 282         WMI_MAIN_SERVICE_GPIO,
 283         WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 284         WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 285         WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 286         WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 287         WMI_MAIN_SERVICE_TX_ENCAP,
 288 };
 289
 290 enum wmi_10_4_service {
 291         WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
 292         WMI_10_4_SERVICE_SCAN_OFFLOAD,
 293         WMI_10_4_SERVICE_ROAM_OFFLOAD,
 294         WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 295         WMI_10_4_SERVICE_STA_PWRSAVE,
 296         WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 297         WMI_10_4_SERVICE_AP_UAPSD,
 298         WMI_10_4_SERVICE_AP_DFS,
 299         WMI_10_4_SERVICE_11AC,
 300         WMI_10_4_SERVICE_BLOCKACK,
 301         WMI_10_4_SERVICE_PHYERR,
 302         WMI_10_4_SERVICE_BCN_FILTER,
 303         WMI_10_4_SERVICE_RTT,
 304         WMI_10_4_SERVICE_RATECTRL,
 305         WMI_10_4_SERVICE_WOW,
 306         WMI_10_4_SERVICE_RATECTRL_CACHE,
 307         WMI_10_4_SERVICE_IRAM_TIDS,
 308         WMI_10_4_SERVICE_BURST,
 309         WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 310         WMI_10_4_SERVICE_GTK_OFFLOAD,
 311         WMI_10_4_SERVICE_SCAN_SCH,
 312         WMI_10_4_SERVICE_CSA_OFFLOAD,
 313         WMI_10_4_SERVICE_CHATTER,
 314         WMI_10_4_SERVICE_COEX_FREQAVOID,
 315         WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 316         WMI_10_4_SERVICE_FORCE_FW_HANG,
 317         WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 318         WMI_10_4_SERVICE_GPIO,
 319         WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 320         WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 321         WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 322         WMI_10_4_SERVICE_TX_ENCAP,
 323         WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 324         WMI_10_4_SERVICE_EARLY_RX,
 325         WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 326         WMI_10_4_SERVICE_TT,
 327         WMI_10_4_SERVICE_ATF,
 328         WMI_10_4_SERVICE_PEER_CACHING,
 329         WMI_10_4_SERVICE_COEX_GPIO,
 330         WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 331         WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 332         WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 333         WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 334         WMI_10_4_SERVICE_MESH_NON_11S,
 335         WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 336         WMI_10_4_SERVICE_PEER_STATS,
 337         WMI_10_4_SERVICE_MESH_11S,
 338         WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 339         WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 340         WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 341         WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 342         WMI_10_4_SERVICE_VDEV_RX_FILTER,
 343         WMI_10_4_SERVICE_BTCOEX,
 344         WMI_10_4_SERVICE_CHECK_CAL_VERSION,
 345         WMI_10_4_SERVICE_DBGLOG_WARN2,
 346         WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
 347         WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
 348         WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
 349         WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
 350         WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
 351         WMI_10_4_SERVICE_TDLS,
 352         WMI_10_4_SERVICE_TDLS_OFFCHAN,
 353         WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
 354         WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
 355         WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 356         WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 357         WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
 358         WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 359         WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
 360         WMI_10_4_SERVICE_TPC_STATS_FINAL,
 361         WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
 362         WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 363         WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
 364         WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
 365         WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 366         WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
 367         WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 368         WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
 369         WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
 370         WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 371         WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
 372         WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
 373         WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
 374         WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 375         WMI_10_4_SERVICE_REPORT_AIRTIME,
 376         WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 377         WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
 378         WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
 379         WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
 380         WMI_10_4_SERVICE_QINQ_SUPPORT,
 381         WMI_10_4_SERVICE_RESET_CHIP,
 382 };
 383
 384 static inline char *wmi_service_name(enum wmi_service service_id)
 385 {
 386 #define SVCSTR(x) case x: return #x
 387
 388         switch (service_id) {
 389         SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
 390         SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
 391         SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
 392         SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
 393         SVCSTR(WMI_SERVICE_STA_PWRSAVE);
 394         SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
 395         SVCSTR(WMI_SERVICE_AP_UAPSD);
 396         SVCSTR(WMI_SERVICE_AP_DFS);
 397         SVCSTR(WMI_SERVICE_11AC);
 398         SVCSTR(WMI_SERVICE_BLOCKACK);
 399         SVCSTR(WMI_SERVICE_PHYERR);
 400         SVCSTR(WMI_SERVICE_BCN_FILTER);
 401         SVCSTR(WMI_SERVICE_RTT);
 402         SVCSTR(WMI_SERVICE_RATECTRL);
 403         SVCSTR(WMI_SERVICE_WOW);
 404         SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
 405         SVCSTR(WMI_SERVICE_IRAM_TIDS);
 406         SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
 407         SVCSTR(WMI_SERVICE_NLO);
 408         SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
 409         SVCSTR(WMI_SERVICE_SCAN_SCH);
 410         SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
 411         SVCSTR(WMI_SERVICE_CHATTER);
 412         SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
 413         SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
 414         SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
 415         SVCSTR(WMI_SERVICE_GPIO);
 416         SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
 417         SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
 418         SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
 419         SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
 420         SVCSTR(WMI_SERVICE_TX_ENCAP);
 421         SVCSTR(WMI_SERVICE_BURST);
 422         SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
 423         SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
 424         SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
 425         SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
 426         SVCSTR(WMI_SERVICE_EARLY_RX);
 427         SVCSTR(WMI_SERVICE_STA_SMPS);
 428         SVCSTR(WMI_SERVICE_FWTEST);
 429         SVCSTR(WMI_SERVICE_STA_WMMAC);
 430         SVCSTR(WMI_SERVICE_TDLS);
 431         SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
 432         SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
 433         SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
 434         SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
 435         SVCSTR(WMI_SERVICE_WLAN_HB);
 436         SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
 437         SVCSTR(WMI_SERVICE_BATCH_SCAN);
 438         SVCSTR(WMI_SERVICE_QPOWER);
 439         SVCSTR(WMI_SERVICE_PLMREQ);
 440         SVCSTR(WMI_SERVICE_THERMAL_MGMT);
 441         SVCSTR(WMI_SERVICE_RMC);
 442         SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
 443         SVCSTR(WMI_SERVICE_COEX_SAR);
 444         SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
 445         SVCSTR(WMI_SERVICE_NAN);
 446         SVCSTR(WMI_SERVICE_L1SS_STAT);
 447         SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
 448         SVCSTR(WMI_SERVICE_OBSS_SCAN);
 449         SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
 450         SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
 451         SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
 452         SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
 453         SVCSTR(WMI_SERVICE_LPASS);
 454         SVCSTR(WMI_SERVICE_EXTSCAN);
 455         SVCSTR(WMI_SERVICE_D0WOW);
 456         SVCSTR(WMI_SERVICE_HSOFFLOAD);
 457         SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
 458         SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
 459         SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
 460         SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
 461         SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
 462         SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
 463         SVCSTR(WMI_SERVICE_ATF);
 464         SVCSTR(WMI_SERVICE_COEX_GPIO);
 465         SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
 466         SVCSTR(WMI_SERVICE_TT);
 467         SVCSTR(WMI_SERVICE_PEER_CACHING);
 468         SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
 469         SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
 470         SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
 471         SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
 472         SVCSTR(WMI_SERVICE_MESH_11S);
 473         SVCSTR(WMI_SERVICE_MESH_NON_11S);
 474         SVCSTR(WMI_SERVICE_PEER_STATS);
 475         SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
 476         SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
 477         SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
 478         SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
 479         SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
 480         SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
 481         SVCSTR(WMI_SERVICE_BTCOEX);
 482         SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
 483         SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
 484         SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
 485         SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
 486         SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
 487         SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
 488         SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
 489         SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
 490         SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
 491         SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
 492         SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
 493         SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
 494         SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
 495         SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
 496         SVCSTR(WMI_SERVICE_RESET_CHIP);
 497         SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
 498         SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
 499         SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
 500         SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
 501         SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
 502         SVCSTR(WMI_SERVICE_THERM_THROT);
 503         SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
 504         SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
 505         SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
 506         SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
 507         SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
 508         SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
 509         SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
 510         SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
 511
 512         case WMI_SERVICE_MAX:
 513                 return NULL;
 514         }
 515
 516 #undef SVCSTR
 517
 518         return NULL;
 519 }
 520
 521 #define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 522         ((svc_id) < (len) && \
 523          __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
 524          BIT((svc_id) % (sizeof(u32))))
 525
 526 /* This extension is required to accommodate new services, current limit
 527  * for wmi_services is 64 as target is using only 4-bits of each 32-bit
 528  * wmi_service word. Extending this to make use of remaining unused bits
 529  * for new services.
 530  */
 531 #define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
 532         ((svc_id) >= (len) && \
 533         __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
 534         BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
 535
 536 #define SVCMAP(x, y, len) \
 537         do { \
 538                 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
 539                     (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
 540                         __set_bit(y, out); \
 541         } while (0)
 542
 543 static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
 544                                    size_t len)
 545 {
 546         SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
 547                WMI_SERVICE_BEACON_OFFLOAD, len);
 548         SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
 549                WMI_SERVICE_SCAN_OFFLOAD, len);
 550         SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
 551                WMI_SERVICE_ROAM_OFFLOAD, len);
 552         SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
 553                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 554         SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
 555                WMI_SERVICE_STA_PWRSAVE, len);
 556         SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
 557                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 558         SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
 559                WMI_SERVICE_AP_UAPSD, len);
 560         SVCMAP(WMI_10X_SERVICE_AP_DFS,
 561                WMI_SERVICE_AP_DFS, len);
 562         SVCMAP(WMI_10X_SERVICE_11AC,
 563                WMI_SERVICE_11AC, len);
 564         SVCMAP(WMI_10X_SERVICE_BLOCKACK,
 565                WMI_SERVICE_BLOCKACK, len);
 566         SVCMAP(WMI_10X_SERVICE_PHYERR,
 567                WMI_SERVICE_PHYERR, len);
 568         SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
 569                WMI_SERVICE_BCN_FILTER, len);
 570         SVCMAP(WMI_10X_SERVICE_RTT,
 571                WMI_SERVICE_RTT, len);
 572         SVCMAP(WMI_10X_SERVICE_RATECTRL,
 573                WMI_SERVICE_RATECTRL, len);
 574         SVCMAP(WMI_10X_SERVICE_WOW,
 575                WMI_SERVICE_WOW, len);
 576         SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
 577                WMI_SERVICE_RATECTRL_CACHE, len);
 578         SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
 579                WMI_SERVICE_IRAM_TIDS, len);
 580         SVCMAP(WMI_10X_SERVICE_BURST,
 581                WMI_SERVICE_BURST, len);
 582         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 583                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 584         SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
 585                WMI_SERVICE_FORCE_FW_HANG, len);
 586         SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 587                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 588         SVCMAP(WMI_10X_SERVICE_ATF,
 589                WMI_SERVICE_ATF, len);
 590         SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
 591                WMI_SERVICE_COEX_GPIO, len);
 592         SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
 593                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 594         SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
 595                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 596         SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
 597                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 598         SVCMAP(WMI_10X_SERVICE_MESH,
 599                WMI_SERVICE_MESH_11S, len);
 600         SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
 601                WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 602         SVCMAP(WMI_10X_SERVICE_PEER_STATS,
 603                WMI_SERVICE_PEER_STATS, len);
 604         SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
 605                WMI_SERVICE_RESET_CHIP, len);
 606         SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 607                WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
 608         SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
 609                WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
 610         SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
 611                WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
 612 }
 613
 614 static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
 615                                     size_t len)
 616 {
 617         SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
 618                WMI_SERVICE_BEACON_OFFLOAD, len);
 619         SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
 620                WMI_SERVICE_SCAN_OFFLOAD, len);
 621         SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
 622                WMI_SERVICE_ROAM_OFFLOAD, len);
 623         SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
 624                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 625         SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
 626                WMI_SERVICE_STA_PWRSAVE, len);
 627         SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
 628                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 629         SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
 630                WMI_SERVICE_AP_UAPSD, len);
 631         SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
 632                WMI_SERVICE_AP_DFS, len);
 633         SVCMAP(WMI_MAIN_SERVICE_11AC,
 634                WMI_SERVICE_11AC, len);
 635         SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
 636                WMI_SERVICE_BLOCKACK, len);
 637         SVCMAP(WMI_MAIN_SERVICE_PHYERR,
 638                WMI_SERVICE_PHYERR, len);
 639         SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
 640                WMI_SERVICE_BCN_FILTER, len);
 641         SVCMAP(WMI_MAIN_SERVICE_RTT,
 642                WMI_SERVICE_RTT, len);
 643         SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
 644                WMI_SERVICE_RATECTRL, len);
 645         SVCMAP(WMI_MAIN_SERVICE_WOW,
 646                WMI_SERVICE_WOW, len);
 647         SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
 648                WMI_SERVICE_RATECTRL_CACHE, len);
 649         SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
 650                WMI_SERVICE_IRAM_TIDS, len);
 651         SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
 652                WMI_SERVICE_ARPNS_OFFLOAD, len);
 653         SVCMAP(WMI_MAIN_SERVICE_NLO,
 654                WMI_SERVICE_NLO, len);
 655         SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
 656                WMI_SERVICE_GTK_OFFLOAD, len);
 657         SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
 658                WMI_SERVICE_SCAN_SCH, len);
 659         SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
 660                WMI_SERVICE_CSA_OFFLOAD, len);
 661         SVCMAP(WMI_MAIN_SERVICE_CHATTER,
 662                WMI_SERVICE_CHATTER, len);
 663         SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
 664                WMI_SERVICE_COEX_FREQAVOID, len);
 665         SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
 666                WMI_SERVICE_PACKET_POWER_SAVE, len);
 667         SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
 668                WMI_SERVICE_FORCE_FW_HANG, len);
 669         SVCMAP(WMI_MAIN_SERVICE_GPIO,
 670                WMI_SERVICE_GPIO, len);
 671         SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
 672                WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
 673         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 674                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 675         SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 676                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 677         SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
 678                WMI_SERVICE_STA_KEEP_ALIVE, len);
 679         SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
 680                WMI_SERVICE_TX_ENCAP, len);
 681 }
 682
 683 static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
 684                                     size_t len)
 685 {
 686         SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
 687                WMI_SERVICE_BEACON_OFFLOAD, len);
 688         SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
 689                WMI_SERVICE_SCAN_OFFLOAD, len);
 690         SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
 691                WMI_SERVICE_ROAM_OFFLOAD, len);
 692         SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
 693                WMI_SERVICE_BCN_MISS_OFFLOAD, len);
 694         SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
 695                WMI_SERVICE_STA_PWRSAVE, len);
 696         SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
 697                WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
 698         SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
 699                WMI_SERVICE_AP_UAPSD, len);
 700         SVCMAP(WMI_10_4_SERVICE_AP_DFS,
 701                WMI_SERVICE_AP_DFS, len);
 702         SVCMAP(WMI_10_4_SERVICE_11AC,
 703                WMI_SERVICE_11AC, len);
 704         SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
 705                WMI_SERVICE_BLOCKACK, len);
 706         SVCMAP(WMI_10_4_SERVICE_PHYERR,
 707                WMI_SERVICE_PHYERR, len);
 708         SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
 709                WMI_SERVICE_BCN_FILTER, len);
 710         SVCMAP(WMI_10_4_SERVICE_RTT,
 711                WMI_SERVICE_RTT, len);
 712         SVCMAP(WMI_10_4_SERVICE_RATECTRL,
 713                WMI_SERVICE_RATECTRL, len);
 714         SVCMAP(WMI_10_4_SERVICE_WOW,
 715                WMI_SERVICE_WOW, len);
 716         SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
 717                WMI_SERVICE_RATECTRL_CACHE, len);
 718         SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
 719                WMI_SERVICE_IRAM_TIDS, len);
 720         SVCMAP(WMI_10_4_SERVICE_BURST,
 721                WMI_SERVICE_BURST, len);
 722         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
 723                WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
 724         SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
 725                WMI_SERVICE_GTK_OFFLOAD, len);
 726         SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
 727                WMI_SERVICE_SCAN_SCH, len);
 728         SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
 729                WMI_SERVICE_CSA_OFFLOAD, len);
 730         SVCMAP(WMI_10_4_SERVICE_CHATTER,
 731                WMI_SERVICE_CHATTER, len);
 732         SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
 733                WMI_SERVICE_COEX_FREQAVOID, len);
 734         SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
 735                WMI_SERVICE_PACKET_POWER_SAVE, len);
 736         SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
 737                WMI_SERVICE_FORCE_FW_HANG, len);
 738         SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
 739                WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
 740         SVCMAP(WMI_10_4_SERVICE_GPIO,
 741                WMI_SERVICE_GPIO, len);
 742         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
 743                WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
 744         SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
 745                WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
 746         SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
 747                WMI_SERVICE_STA_KEEP_ALIVE, len);
 748         SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
 749                WMI_SERVICE_TX_ENCAP, len);
 750         SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
 751                WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
 752         SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
 753                WMI_SERVICE_EARLY_RX, len);
 754         SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
 755                WMI_SERVICE_ENHANCED_PROXY_STA, len);
 756         SVCMAP(WMI_10_4_SERVICE_TT,
 757                WMI_SERVICE_TT, len);
 758         SVCMAP(WMI_10_4_SERVICE_ATF,
 759                WMI_SERVICE_ATF, len);
 760         SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
 761                WMI_SERVICE_PEER_CACHING, len);
 762         SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
 763                WMI_SERVICE_COEX_GPIO, len);
 764         SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
 765                WMI_SERVICE_AUX_SPECTRAL_INTF, len);
 766         SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
 767                WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
 768         SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
 769                WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
 770         SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
 771                WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
 772         SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
 773                WMI_SERVICE_MESH_NON_11S, len);
 774         SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
 775                WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
 776         SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
 777                WMI_SERVICE_PEER_STATS, len);
 778         SVCMAP(WMI_10_4_SERVICE_MESH_11S,
 779                WMI_SERVICE_MESH_11S, len);
 780         SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
 781                WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
 782         SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
 783                WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
 784         SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
 785                WMI_SERVICE_TX_MODE_PUSH_PULL, len);
 786         SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
 787                WMI_SERVICE_TX_MODE_DYNAMIC, len);
 788         SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
 789                WMI_SERVICE_VDEV_RX_FILTER, len);
 790         SVCMAP(WMI_10_4_SERVICE_BTCOEX,
 791                WMI_SERVICE_BTCOEX, len);
 792         SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
 793                WMI_SERVICE_CHECK_CAL_VERSION, len);
 794         SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
 795                WMI_SERVICE_DBGLOG_WARN2, len);
 796         SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
 797                WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
 798         SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
 799                WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
 800         SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
 801                WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
 802         SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
 803                WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
 804         SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
 805                WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
 806         SVCMAP(WMI_10_4_SERVICE_TDLS,
 807                WMI_SERVICE_TDLS, len);
 808         SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
 809                WMI_SERVICE_TDLS_OFFCHAN, len);
 810         SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
 811                WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
 812         SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
 813                WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
 814         SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
 815                WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
 816         SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
 817                WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
 818         SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
 819                WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
 820         SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
 821                WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
 822         SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
 823                WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
 824         SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
 825                WMI_SERVICE_TPC_STATS_FINAL, len);
 826         SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
 827                WMI_SERVICE_TX_DATA_ACK_RSSI, len);
 828         SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
 829                WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
 830         SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
 831                WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
 832         SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
 833                WMI_SERVICE_RTT_RESPONDER_ROLE, len);
 834         SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
 835                WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
 836         SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
 837                WMI_SERVICE_REPORT_AIRTIME, len);
 838         SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
 839                WMI_SERVICE_TX_PWR_PER_PEER, len);
 840         SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
 841                WMI_SERVICE_RESET_CHIP, len);
 842         SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
 843                WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 844         SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
 845                WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
 846 }
 847
 848 #undef SVCMAP
 849
 850 /* 2 word representation of MAC addr */
 851 struct wmi_mac_addr {
 852         union {
 853                 u8 addr[6];
 854                 struct {
 855                         u32 word0;
 856                         u32 word1;
 857                 } __packed;
 858         } __packed;
 859 } __packed;
 860
 861 struct wmi_cmd_map {
 862         u32 init_cmdid;
 863         u32 start_scan_cmdid;
 864         u32 stop_scan_cmdid;
 865         u32 scan_chan_list_cmdid;
 866         u32 scan_sch_prio_tbl_cmdid;
 867         u32 scan_prob_req_oui_cmdid;
 868         u32 pdev_set_regdomain_cmdid;
 869         u32 pdev_set_channel_cmdid;
 870         u32 pdev_set_param_cmdid;
 871         u32 pdev_pktlog_enable_cmdid;
 872         u32 pdev_pktlog_disable_cmdid;
 873         u32 pdev_set_wmm_params_cmdid;
 874         u32 pdev_set_ht_cap_ie_cmdid;
 875         u32 pdev_set_vht_cap_ie_cmdid;
 876         u32 pdev_set_dscp_tid_map_cmdid;
 877         u32 pdev_set_quiet_mode_cmdid;
 878         u32 pdev_green_ap_ps_enable_cmdid;
 879         u32 pdev_get_tpc_config_cmdid;
 880         u32 pdev_set_base_macaddr_cmdid;
 881         u32 vdev_create_cmdid;
 882         u32 vdev_delete_cmdid;
 883         u32 vdev_start_request_cmdid;
 884         u32 vdev_restart_request_cmdid;
 885         u32 vdev_up_cmdid;
 886         u32 vdev_stop_cmdid;
 887         u32 vdev_down_cmdid;
 888         u32 vdev_set_param_cmdid;
 889         u32 vdev_install_key_cmdid;
 890         u32 peer_create_cmdid;
 891         u32 peer_delete_cmdid;
 892         u32 peer_flush_tids_cmdid;
 893         u32 peer_set_param_cmdid;
 894         u32 peer_assoc_cmdid;
 895         u32 peer_add_wds_entry_cmdid;
 896         u32 peer_remove_wds_entry_cmdid;
 897         u32 peer_mcast_group_cmdid;
 898         u32 bcn_tx_cmdid;
 899         u32 pdev_send_bcn_cmdid;
 900         u32 bcn_tmpl_cmdid;
 901         u32 bcn_filter_rx_cmdid;
 902         u32 prb_req_filter_rx_cmdid;
 903         u32 mgmt_tx_cmdid;
 904         u32 mgmt_tx_send_cmdid;
 905         u32 prb_tmpl_cmdid;
 906         u32 addba_clear_resp_cmdid;
 907         u32 addba_send_cmdid;
 908         u32 addba_status_cmdid;
 909         u32 delba_send_cmdid;
 910         u32 addba_set_resp_cmdid;
 911         u32 send_singleamsdu_cmdid;
 912         u32 sta_powersave_mode_cmdid;
 913         u32 sta_powersave_param_cmdid;
 914         u32 sta_mimo_ps_mode_cmdid;
 915         u32 pdev_dfs_enable_cmdid;
 916         u32 pdev_dfs_disable_cmdid;
 917         u32 roam_scan_mode;
 918         u32 roam_scan_rssi_threshold;
 919         u32 roam_scan_period;
 920         u32 roam_scan_rssi_change_threshold;
 921         u32 roam_ap_profile;
 922         u32 ofl_scan_add_ap_profile;
 923         u32 ofl_scan_remove_ap_profile;
 924         u32 ofl_scan_period;
 925         u32 p2p_dev_set_device_info;
 926         u32 p2p_dev_set_discoverability;
 927         u32 p2p_go_set_beacon_ie;
 928         u32 p2p_go_set_probe_resp_ie;
 929         u32 p2p_set_vendor_ie_data_cmdid;
 930         u32 ap_ps_peer_param_cmdid;
 931         u32 ap_ps_peer_uapsd_coex_cmdid;
 932         u32 peer_rate_retry_sched_cmdid;
 933         u32 wlan_profile_trigger_cmdid;
 934         u32 wlan_profile_set_hist_intvl_cmdid;
 935         u32 wlan_profile_get_profile_data_cmdid;
 936         u32 wlan_profile_enable_profile_id_cmdid;
 937         u32 wlan_profile_list_profile_id_cmdid;
 938         u32 pdev_suspend_cmdid;
 939         u32 pdev_resume_cmdid;
 940         u32 add_bcn_filter_cmdid;
 941         u32 rmv_bcn_filter_cmdid;
 942         u32 wow_add_wake_pattern_cmdid;
 943         u32 wow_del_wake_pattern_cmdid;
 944         u32 wow_enable_disable_wake_event_cmdid;
 945         u32 wow_enable_cmdid;
 946         u32 wow_hostwakeup_from_sleep_cmdid;
 947         u32 rtt_measreq_cmdid;
 948         u32 rtt_tsf_cmdid;
 949         u32 vdev_spectral_scan_configure_cmdid;
 950         u32 vdev_spectral_scan_enable_cmdid;
 951         u32 request_stats_cmdid;
 952         u32 request_peer_stats_info_cmdid;
 953         u32 set_arp_ns_offload_cmdid;
 954         u32 network_list_offload_config_cmdid;
 955         u32 gtk_offload_cmdid;
 956         u32 csa_offload_enable_cmdid;
 957         u32 csa_offload_chanswitch_cmdid;
 958         u32 chatter_set_mode_cmdid;
 959         u32 peer_tid_addba_cmdid;
 960         u32 peer_tid_delba_cmdid;
 961         u32 sta_dtim_ps_method_cmdid;
 962         u32 sta_uapsd_auto_trig_cmdid;
 963         u32 sta_keepalive_cmd;
 964         u32 echo_cmdid;
 965         u32 pdev_utf_cmdid;
 966         u32 dbglog_cfg_cmdid;
 967         u32 pdev_qvit_cmdid;
 968         u32 pdev_ftm_intg_cmdid;
 969         u32 vdev_set_keepalive_cmdid;
 970         u32 vdev_get_keepalive_cmdid;
 971         u32 force_fw_hang_cmdid;
 972         u32 gpio_config_cmdid;
 973         u32 gpio_output_cmdid;
 974         u32 pdev_get_temperature_cmdid;
 975         u32 vdev_set_wmm_params_cmdid;
 976         u32 tdls_set_state_cmdid;
 977         u32 tdls_peer_update_cmdid;
 978         u32 adaptive_qcs_cmdid;
 979         u32 scan_update_request_cmdid;
 980         u32 vdev_standby_response_cmdid;
 981         u32 vdev_resume_response_cmdid;
 982         u32 wlan_peer_caching_add_peer_cmdid;
 983         u32 wlan_peer_caching_evict_peer_cmdid;
 984         u32 wlan_peer_caching_restore_peer_cmdid;
 985         u32 wlan_peer_caching_print_all_peers_info_cmdid;
 986         u32 peer_update_wds_entry_cmdid;
 987         u32 peer_add_proxy_sta_entry_cmdid;
 988         u32 rtt_keepalive_cmdid;
 989         u32 oem_req_cmdid;
 990         u32 nan_cmdid;
 991         u32 vdev_ratemask_cmdid;
 992         u32 qboost_cfg_cmdid;
 993         u32 pdev_smart_ant_enable_cmdid;
 994         u32 pdev_smart_ant_set_rx_antenna_cmdid;
 995         u32 peer_smart_ant_set_tx_antenna_cmdid;
 996         u32 peer_smart_ant_set_train_info_cmdid;
 997         u32 peer_smart_ant_set_node_config_ops_cmdid;
 998         u32 pdev_set_antenna_switch_table_cmdid;
 999         u32 pdev_set_ctl_table_cmdid;
1000         u32 pdev_set_mimogain_table_cmdid;
1001         u32 pdev_ratepwr_table_cmdid;
1002         u32 pdev_ratepwr_chainmsk_table_cmdid;
1003         u32 pdev_fips_cmdid;
1004         u32 tt_set_conf_cmdid;
1005         u32 fwtest_cmdid;
1006         u32 vdev_atf_request_cmdid;
1007         u32 peer_atf_request_cmdid;
1008         u32 pdev_get_ani_cck_config_cmdid;
1009         u32 pdev_get_ani_ofdm_config_cmdid;
1010         u32 pdev_reserve_ast_entry_cmdid;
1011         u32 pdev_get_nfcal_power_cmdid;
1012         u32 pdev_get_tpc_cmdid;
1013         u32 pdev_get_ast_info_cmdid;
1014         u32 vdev_set_dscp_tid_map_cmdid;
1015         u32 pdev_get_info_cmdid;
1016         u32 vdev_get_info_cmdid;
1017         u32 vdev_filter_neighbor_rx_packets_cmdid;
1018         u32 mu_cal_start_cmdid;
1019         u32 set_cca_params_cmdid;
1020         u32 pdev_bss_chan_info_request_cmdid;
1021         u32 pdev_enable_adaptive_cca_cmdid;
1022         u32 ext_resource_cfg_cmdid;
1023         u32 vdev_set_ie_cmdid;
1024         u32 set_lteu_config_cmdid;
1025         u32 atf_ssid_grouping_request_cmdid;
1026         u32 peer_atf_ext_request_cmdid;
1027         u32 set_periodic_channel_stats_cfg_cmdid;
1028         u32 peer_bwf_request_cmdid;
1029         u32 btcoex_cfg_cmdid;
1030         u32 peer_tx_mu_txmit_count_cmdid;
1031         u32 peer_tx_mu_txmit_rstcnt_cmdid;
1032         u32 peer_gid_userpos_list_cmdid;
1033         u32 pdev_check_cal_version_cmdid;
1034         u32 coex_version_cfg_cmid;
1035         u32 pdev_get_rx_filter_cmdid;
1036         u32 pdev_extended_nss_cfg_cmdid;
1037         u32 vdev_set_scan_nac_rssi_cmdid;
1038         u32 prog_gpio_band_select_cmdid;
1039         u32 config_smart_logging_cmdid;
1040         u32 debug_fatal_condition_cmdid;
1041         u32 get_tsf_timer_cmdid;
1042         u32 pdev_get_tpc_table_cmdid;
1043         u32 vdev_sifs_trigger_time_cmdid;
1044         u32 pdev_wds_entry_list_cmdid;
1045         u32 tdls_set_offchan_mode_cmdid;
1046         u32 radar_found_cmdid;
1047         u32 set_bb_timing_cmdid;
1048         u32 per_peer_per_tid_config_cmdid;
1049 };
1050
1051 /*
1052  * wmi command groups.
1053  */
1054 enum wmi_cmd_group {
1055         /* 0 to 2 are reserved */
1056         WMI_GRP_START = 0x3,
1057         WMI_GRP_SCAN = WMI_GRP_START,
1058         WMI_GRP_PDEV,
1059         WMI_GRP_VDEV,
1060         WMI_GRP_PEER,
1061         WMI_GRP_MGMT,
1062         WMI_GRP_BA_NEG,
1063         WMI_GRP_STA_PS,
1064         WMI_GRP_DFS,
1065         WMI_GRP_ROAM,
1066         WMI_GRP_OFL_SCAN,
1067         WMI_GRP_P2P,
1068         WMI_GRP_AP_PS,
1069         WMI_GRP_RATE_CTRL,
1070         WMI_GRP_PROFILE,
1071         WMI_GRP_SUSPEND,
1072         WMI_GRP_BCN_FILTER,
1073         WMI_GRP_WOW,
1074         WMI_GRP_RTT,
1075         WMI_GRP_SPECTRAL,
1076         WMI_GRP_STATS,
1077         WMI_GRP_ARP_NS_OFL,
1078         WMI_GRP_NLO_OFL,
1079         WMI_GRP_GTK_OFL,
1080         WMI_GRP_CSA_OFL,
1081         WMI_GRP_CHATTER,
1082         WMI_GRP_TID_ADDBA,
1083         WMI_GRP_MISC,
1084         WMI_GRP_GPIO,
1085 };
1086
1087 #define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1088 #define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1089
1090 #define WMI_CMD_UNSUPPORTED 0
1091
1092 /* Command IDs and command events for MAIN FW. */
1093 enum wmi_cmd_id {
1094         WMI_INIT_CMDID = 0x1,
1095
1096         /* Scan specific commands */
1097         WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1098         WMI_STOP_SCAN_CMDID,
1099         WMI_SCAN_CHAN_LIST_CMDID,
1100         WMI_SCAN_SCH_PRIO_TBL_CMDID,
1101
1102         /* PDEV (physical device) specific commands */
1103         WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1104         WMI_PDEV_SET_CHANNEL_CMDID,
1105         WMI_PDEV_SET_PARAM_CMDID,
1106         WMI_PDEV_PKTLOG_ENABLE_CMDID,
1107         WMI_PDEV_PKTLOG_DISABLE_CMDID,
1108         WMI_PDEV_SET_WMM_PARAMS_CMDID,
1109         WMI_PDEV_SET_HT_CAP_IE_CMDID,
1110         WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1111         WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1112         WMI_PDEV_SET_QUIET_MODE_CMDID,
1113         WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1114         WMI_PDEV_GET_TPC_CONFIG_CMDID,
1115         WMI_PDEV_SET_BASE_MACADDR_CMDID,
1116
1117         /* VDEV (virtual device) specific commands */
1118         WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1119         WMI_VDEV_DELETE_CMDID,
1120         WMI_VDEV_START_REQUEST_CMDID,
1121         WMI_VDEV_RESTART_REQUEST_CMDID,
1122         WMI_VDEV_UP_CMDID,
1123         WMI_VDEV_STOP_CMDID,
1124         WMI_VDEV_DOWN_CMDID,
1125         WMI_VDEV_SET_PARAM_CMDID,
1126         WMI_VDEV_INSTALL_KEY_CMDID,
1127
1128         /* peer specific commands */
1129         WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1130         WMI_PEER_DELETE_CMDID,
1131         WMI_PEER_FLUSH_TIDS_CMDID,
1132         WMI_PEER_SET_PARAM_CMDID,
1133         WMI_PEER_ASSOC_CMDID,
1134         WMI_PEER_ADD_WDS_ENTRY_CMDID,
1135         WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1136         WMI_PEER_MCAST_GROUP_CMDID,
1137
1138         /* beacon/management specific commands */
1139         WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1140         WMI_PDEV_SEND_BCN_CMDID,
1141         WMI_BCN_TMPL_CMDID,
1142         WMI_BCN_FILTER_RX_CMDID,
1143         WMI_PRB_REQ_FILTER_RX_CMDID,
1144         WMI_MGMT_TX_CMDID,
1145         WMI_PRB_TMPL_CMDID,
1146
1147         /* commands to directly control BA negotiation directly from host. */
1148         WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1149         WMI_ADDBA_SEND_CMDID,
1150         WMI_ADDBA_STATUS_CMDID,
1151         WMI_DELBA_SEND_CMDID,
1152         WMI_ADDBA_SET_RESP_CMDID,
1153         WMI_SEND_SINGLEAMSDU_CMDID,
1154
1155         /* Station power save specific config */
1156         WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1157         WMI_STA_POWERSAVE_PARAM_CMDID,
1158         WMI_STA_MIMO_PS_MODE_CMDID,
1159
1160         /** DFS-specific commands */
1161         WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1162         WMI_PDEV_DFS_DISABLE_CMDID,
1163
1164         /* Roaming specific  commands */
1165         WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1166         WMI_ROAM_SCAN_RSSI_THRESHOLD,
1167         WMI_ROAM_SCAN_PERIOD,
1168         WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1169         WMI_ROAM_AP_PROFILE,
1170
1171         /* offload scan specific commands */
1172         WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1173         WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1174         WMI_OFL_SCAN_PERIOD,
1175
1176         /* P2P specific commands */
1177         WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1178         WMI_P2P_DEV_SET_DISCOVERABILITY,
1179         WMI_P2P_GO_SET_BEACON_IE,
1180         WMI_P2P_GO_SET_PROBE_RESP_IE,
1181         WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1182
1183         /* AP power save specific config */
1184         WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1185         WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1186
1187         /* Rate-control specific commands */
1188         WMI_PEER_RATE_RETRY_SCHED_CMDID =
1189         WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1190
1191         /* WLAN Profiling commands. */
1192         WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1193         WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1194         WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1195         WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1196         WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1197
1198         /* Suspend resume command Ids */
1199         WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1200         WMI_PDEV_RESUME_CMDID,
1201
1202         /* Beacon filter commands */
1203         WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1204         WMI_RMV_BCN_FILTER_CMDID,
1205
1206         /* WOW Specific WMI commands*/
1207         WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1208         WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1209         WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1210         WMI_WOW_ENABLE_CMDID,
1211         WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1212
1213         /* RTT measurement related cmd */
1214         WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1215         WMI_RTT_TSF_CMDID,
1216
1217         /* spectral scan commands */
1218         WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1219         WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1220
1221         /* F/W stats */
1222         WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1223
1224         /* ARP OFFLOAD REQUEST*/
1225         WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1226
1227         /* NS offload confid*/
1228         WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1229
1230         /* GTK offload Specific WMI commands*/
1231         WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1232
1233         /* CSA offload Specific WMI commands*/
1234         WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1235         WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1236
1237         /* Chatter commands*/
1238         WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1239
1240         /* addba specific commands */
1241         WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1242         WMI_PEER_TID_DELBA_CMDID,
1243
1244         /* set station mimo powersave method */
1245         WMI_STA_DTIM_PS_METHOD_CMDID,
1246         /* Configure the Station UAPSD AC Auto Trigger Parameters */
1247         WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1248
1249         /* STA Keep alive parameter configuration,
1250          * Requires WMI_SERVICE_STA_KEEP_ALIVE
1251          */
1252         WMI_STA_KEEPALIVE_CMD,
1253
1254         /* misc command group */
1255         WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1256         WMI_PDEV_UTF_CMDID,
1257         WMI_DBGLOG_CFG_CMDID,
1258         WMI_PDEV_QVIT_CMDID,
1259         WMI_PDEV_FTM_INTG_CMDID,
1260         WMI_VDEV_SET_KEEPALIVE_CMDID,
1261         WMI_VDEV_GET_KEEPALIVE_CMDID,
1262         WMI_FORCE_FW_HANG_CMDID,
1263
1264         /* GPIO Configuration */
1265         WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1266         WMI_GPIO_OUTPUT_CMDID,
1267 };
1268
1269 enum wmi_event_id {
1270         WMI_SERVICE_READY_EVENTID = 0x1,
1271         WMI_READY_EVENTID,
1272         WMI_SERVICE_AVAILABLE_EVENTID,
1273
1274         /* Scan specific events */
1275         WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1276
1277         /* PDEV specific events */
1278         WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1279         WMI_CHAN_INFO_EVENTID,
1280         WMI_PHYERR_EVENTID,
1281
1282         /* VDEV specific events */
1283         WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1284         WMI_VDEV_STOPPED_EVENTID,
1285         WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1286
1287         /* peer specific events */
1288         WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1289
1290         /* beacon/mgmt specific events */
1291         WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1292         WMI_HOST_SWBA_EVENTID,
1293         WMI_TBTTOFFSET_UPDATE_EVENTID,
1294
1295         /* ADDBA Related WMI Events*/
1296         WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1297         WMI_TX_ADDBA_COMPLETE_EVENTID,
1298
1299         /* Roam event to trigger roaming on host */
1300         WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1301         WMI_PROFILE_MATCH,
1302
1303         /* WoW */
1304         WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1305
1306         /* RTT */
1307         WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1308         WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1309         WMI_RTT_ERROR_REPORT_EVENTID,
1310
1311         /* GTK offload */
1312         WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1313         WMI_GTK_REKEY_FAIL_EVENTID,
1314
1315         /* CSA IE received event */
1316         WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1317
1318         /* Misc events */
1319         WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1320         WMI_PDEV_UTF_EVENTID,
1321         WMI_DEBUG_MESG_EVENTID,
1322         WMI_UPDATE_STATS_EVENTID,
1323         WMI_DEBUG_PRINT_EVENTID,
1324         WMI_DCS_INTERFERENCE_EVENTID,
1325         WMI_PDEV_QVIT_EVENTID,
1326         WMI_WLAN_PROFILE_DATA_EVENTID,
1327         WMI_PDEV_FTM_INTG_EVENTID,
1328         WMI_WLAN_FREQ_AVOID_EVENTID,
1329         WMI_VDEV_GET_KEEPALIVE_EVENTID,
1330
1331         /* GPIO Event */
1332         WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1333 };
1334
1335 /* Command IDs and command events for 10.X firmware */
1336 enum wmi_10x_cmd_id {
1337         WMI_10X_START_CMDID = 0x9000,
1338         WMI_10X_END_CMDID = 0x9FFF,
1339
1340         /* initialize the wlan sub system */
1341         WMI_10X_INIT_CMDID,
1342
1343         /* Scan specific commands */
1344
1345         WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1346         WMI_10X_STOP_SCAN_CMDID,
1347         WMI_10X_SCAN_CHAN_LIST_CMDID,
1348         WMI_10X_ECHO_CMDID,
1349
1350         /* PDEV(physical device) specific commands */
1351         WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1352         WMI_10X_PDEV_SET_CHANNEL_CMDID,
1353         WMI_10X_PDEV_SET_PARAM_CMDID,
1354         WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1355         WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1356         WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1357         WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1358         WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1359         WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1360         WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1361         WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1362         WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1363         WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1364
1365         /* VDEV(virtual device) specific commands */
1366         WMI_10X_VDEV_CREATE_CMDID,
1367         WMI_10X_VDEV_DELETE_CMDID,
1368         WMI_10X_VDEV_START_REQUEST_CMDID,
1369         WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1370         WMI_10X_VDEV_UP_CMDID,
1371         WMI_10X_VDEV_STOP_CMDID,
1372         WMI_10X_VDEV_DOWN_CMDID,
1373         WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1374         WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1375         WMI_10X_VDEV_SET_PARAM_CMDID,
1376         WMI_10X_VDEV_INSTALL_KEY_CMDID,
1377
1378         /* peer specific commands */
1379         WMI_10X_PEER_CREATE_CMDID,
1380         WMI_10X_PEER_DELETE_CMDID,
1381         WMI_10X_PEER_FLUSH_TIDS_CMDID,
1382         WMI_10X_PEER_SET_PARAM_CMDID,
1383         WMI_10X_PEER_ASSOC_CMDID,
1384         WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1385         WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1386         WMI_10X_PEER_MCAST_GROUP_CMDID,
1387
1388         /* beacon/management specific commands */
1389
1390         WMI_10X_BCN_TX_CMDID,
1391         WMI_10X_BCN_PRB_TMPL_CMDID,
1392         WMI_10X_BCN_FILTER_RX_CMDID,
1393         WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1394         WMI_10X_MGMT_TX_CMDID,
1395
1396         /* commands to directly control ba negotiation directly from host. */
1397         WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1398         WMI_10X_ADDBA_SEND_CMDID,
1399         WMI_10X_ADDBA_STATUS_CMDID,
1400         WMI_10X_DELBA_SEND_CMDID,
1401         WMI_10X_ADDBA_SET_RESP_CMDID,
1402         WMI_10X_SEND_SINGLEAMSDU_CMDID,
1403
1404         /* Station power save specific config */
1405         WMI_10X_STA_POWERSAVE_MODE_CMDID,
1406         WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1407         WMI_10X_STA_MIMO_PS_MODE_CMDID,
1408
1409         /* set debug log config */
1410         WMI_10X_DBGLOG_CFG_CMDID,
1411
1412         /* DFS-specific commands */
1413         WMI_10X_PDEV_DFS_ENABLE_CMDID,
1414         WMI_10X_PDEV_DFS_DISABLE_CMDID,
1415
1416         /* QVIT specific command id */
1417         WMI_10X_PDEV_QVIT_CMDID,
1418
1419         /* Offload Scan and Roaming related  commands */
1420         WMI_10X_ROAM_SCAN_MODE,
1421         WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1422         WMI_10X_ROAM_SCAN_PERIOD,
1423         WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1424         WMI_10X_ROAM_AP_PROFILE,
1425         WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1426         WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1427         WMI_10X_OFL_SCAN_PERIOD,
1428
1429         /* P2P specific commands */
1430         WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1431         WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1432         WMI_10X_P2P_GO_SET_BEACON_IE,
1433         WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1434
1435         /* AP power save specific config */
1436         WMI_10X_AP_PS_PEER_PARAM_CMDID,
1437         WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1438
1439         /* Rate-control specific commands */
1440         WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1441
1442         /* WLAN Profiling commands. */
1443         WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1444         WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1445         WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1446         WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1447         WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1448
1449         /* Suspend resume command Ids */
1450         WMI_10X_PDEV_SUSPEND_CMDID,
1451         WMI_10X_PDEV_RESUME_CMDID,
1452
1453         /* Beacon filter commands */
1454         WMI_10X_ADD_BCN_FILTER_CMDID,
1455         WMI_10X_RMV_BCN_FILTER_CMDID,
1456
1457         /* WOW Specific WMI commands*/
1458         WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1459         WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1460         WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1461         WMI_10X_WOW_ENABLE_CMDID,
1462         WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1463
1464         /* RTT measurement related cmd */
1465         WMI_10X_RTT_MEASREQ_CMDID,
1466         WMI_10X_RTT_TSF_CMDID,
1467
1468         /* transmit beacon by value */
1469         WMI_10X_PDEV_SEND_BCN_CMDID,
1470
1471         /* F/W stats */
1472         WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1473         WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1474         WMI_10X_REQUEST_STATS_CMDID,
1475
1476         /* GPIO Configuration */
1477         WMI_10X_GPIO_CONFIG_CMDID,
1478         WMI_10X_GPIO_OUTPUT_CMDID,
1479
1480         WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1481 };
1482
1483 enum wmi_10x_event_id {
1484         WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1485         WMI_10X_READY_EVENTID,
1486         WMI_10X_START_EVENTID = 0x9000,
1487         WMI_10X_END_EVENTID = 0x9FFF,
1488
1489         /* Scan specific events */
1490         WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1491         WMI_10X_ECHO_EVENTID,
1492         WMI_10X_DEBUG_MESG_EVENTID,
1493         WMI_10X_UPDATE_STATS_EVENTID,
1494
1495         /* Instantaneous RSSI event */
1496         WMI_10X_INST_RSSI_STATS_EVENTID,
1497
1498         /* VDEV specific events */
1499         WMI_10X_VDEV_START_RESP_EVENTID,
1500         WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1501         WMI_10X_VDEV_RESUME_REQ_EVENTID,
1502         WMI_10X_VDEV_STOPPED_EVENTID,
1503
1504         /* peer  specific events */
1505         WMI_10X_PEER_STA_KICKOUT_EVENTID,
1506
1507         /* beacon/mgmt specific events */
1508         WMI_10X_HOST_SWBA_EVENTID,
1509         WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1510         WMI_10X_MGMT_RX_EVENTID,
1511
1512         /* Channel stats event */
1513         WMI_10X_CHAN_INFO_EVENTID,
1514
1515         /* PHY Error specific WMI event */
1516         WMI_10X_PHYERR_EVENTID,
1517
1518         /* Roam event to trigger roaming on host */
1519         WMI_10X_ROAM_EVENTID,
1520
1521         /* matching AP found from list of profiles */
1522         WMI_10X_PROFILE_MATCH,
1523
1524         /* debug print message used for tracing FW code while debugging */
1525         WMI_10X_DEBUG_PRINT_EVENTID,
1526         /* VI spoecific event */
1527         WMI_10X_PDEV_QVIT_EVENTID,
1528         /* FW code profile data in response to profile request */
1529         WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1530
1531         /*RTT related event ID*/
1532         WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1533         WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1534         WMI_10X_RTT_ERROR_REPORT_EVENTID,
1535
1536         WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1537         WMI_10X_DCS_INTERFERENCE_EVENTID,
1538
1539         /* TPC config for the current operating channel */
1540         WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1541
1542         WMI_10X_GPIO_INPUT_EVENTID,
1543         WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1544 };
1545
1546 enum wmi_10_2_cmd_id {
1547         WMI_10_2_START_CMDID = 0x9000,
1548         WMI_10_2_END_CMDID = 0x9FFF,
1549         WMI_10_2_INIT_CMDID,
1550         WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1551         WMI_10_2_STOP_SCAN_CMDID,
1552         WMI_10_2_SCAN_CHAN_LIST_CMDID,
1553         WMI_10_2_ECHO_CMDID,
1554         WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1555         WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1556         WMI_10_2_PDEV_SET_PARAM_CMDID,
1557         WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1558         WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1559         WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1560         WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1561         WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1562         WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1563         WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1564         WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1565         WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1566         WMI_10_2_VDEV_CREATE_CMDID,
1567         WMI_10_2_VDEV_DELETE_CMDID,
1568         WMI_10_2_VDEV_START_REQUEST_CMDID,
1569         WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1570         WMI_10_2_VDEV_UP_CMDID,
1571         WMI_10_2_VDEV_STOP_CMDID,
1572         WMI_10_2_VDEV_DOWN_CMDID,
1573         WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1574         WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1575         WMI_10_2_VDEV_SET_PARAM_CMDID,
1576         WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1577         WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1578         WMI_10_2_PEER_CREATE_CMDID,
1579         WMI_10_2_PEER_DELETE_CMDID,
1580         WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1581         WMI_10_2_PEER_SET_PARAM_CMDID,
1582         WMI_10_2_PEER_ASSOC_CMDID,
1583         WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1584         WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1585         WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1586         WMI_10_2_PEER_MCAST_GROUP_CMDID,
1587         WMI_10_2_BCN_TX_CMDID,
1588         WMI_10_2_BCN_PRB_TMPL_CMDID,
1589         WMI_10_2_BCN_FILTER_RX_CMDID,
1590         WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1591         WMI_10_2_MGMT_TX_CMDID,
1592         WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1593         WMI_10_2_ADDBA_SEND_CMDID,
1594         WMI_10_2_ADDBA_STATUS_CMDID,
1595         WMI_10_2_DELBA_SEND_CMDID,
1596         WMI_10_2_ADDBA_SET_RESP_CMDID,
1597         WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1598         WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1599         WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1600         WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1601         WMI_10_2_DBGLOG_CFG_CMDID,
1602         WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1603         WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1604         WMI_10_2_PDEV_QVIT_CMDID,
1605         WMI_10_2_ROAM_SCAN_MODE,
1606         WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1607         WMI_10_2_ROAM_SCAN_PERIOD,
1608         WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1609         WMI_10_2_ROAM_AP_PROFILE,
1610         WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1611         WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1612         WMI_10_2_OFL_SCAN_PERIOD,
1613         WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1614         WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1615         WMI_10_2_P2P_GO_SET_BEACON_IE,
1616         WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1617         WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1618         WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1619         WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1620         WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1621         WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1622         WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1623         WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1624         WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1625         WMI_10_2_PDEV_SUSPEND_CMDID,
1626         WMI_10_2_PDEV_RESUME_CMDID,
1627         WMI_10_2_ADD_BCN_FILTER_CMDID,
1628         WMI_10_2_RMV_BCN_FILTER_CMDID,
1629         WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1630         WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1631         WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1632         WMI_10_2_WOW_ENABLE_CMDID,
1633         WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1634         WMI_10_2_RTT_MEASREQ_CMDID,
1635         WMI_10_2_RTT_TSF_CMDID,
1636         WMI_10_2_RTT_KEEPALIVE_CMDID,
1637         WMI_10_2_PDEV_SEND_BCN_CMDID,
1638         WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1639         WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1640         WMI_10_2_REQUEST_STATS_CMDID,
1641         WMI_10_2_GPIO_CONFIG_CMDID,
1642         WMI_10_2_GPIO_OUTPUT_CMDID,
1643         WMI_10_2_VDEV_RATEMASK_CMDID,
1644         WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1645         WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1646         WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1647         WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1648         WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1649         WMI_10_2_FORCE_FW_HANG_CMDID,
1650         WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1651         WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1652         WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1653         WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1654         WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1655         WMI_10_2_PDEV_GET_INFO,
1656         WMI_10_2_VDEV_GET_INFO,
1657         WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1658         WMI_10_2_PEER_ATF_REQUEST_CMDID,
1659         WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1660         WMI_10_2_MU_CAL_START_CMDID,
1661         WMI_10_2_SET_LTEU_CONFIG_CMDID,
1662         WMI_10_2_SET_CCA_PARAMS,
1663         WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1664         WMI_10_2_FWTEST_CMDID,
1665         WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1666         WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1667 };
1668
1669 enum wmi_10_2_event_id {
1670         WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1671         WMI_10_2_READY_EVENTID,
1672         WMI_10_2_DEBUG_MESG_EVENTID,
1673         WMI_10_2_START_EVENTID = 0x9000,
1674         WMI_10_2_END_EVENTID = 0x9FFF,
1675         WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1676         WMI_10_2_ECHO_EVENTID,
1677         WMI_10_2_UPDATE_STATS_EVENTID,
1678         WMI_10_2_INST_RSSI_STATS_EVENTID,
1679         WMI_10_2_VDEV_START_RESP_EVENTID,
1680         WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1681         WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1682         WMI_10_2_VDEV_STOPPED_EVENTID,
1683         WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1684         WMI_10_2_HOST_SWBA_EVENTID,
1685         WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1686         WMI_10_2_MGMT_RX_EVENTID,
1687         WMI_10_2_CHAN_INFO_EVENTID,
1688         WMI_10_2_PHYERR_EVENTID,
1689         WMI_10_2_ROAM_EVENTID,
1690         WMI_10_2_PROFILE_MATCH,
1691         WMI_10_2_DEBUG_PRINT_EVENTID,
1692         WMI_10_2_PDEV_QVIT_EVENTID,
1693         WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1694         WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1695         WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1696         WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1697         WMI_10_2_RTT_KEEPALIVE_EVENTID,
1698         WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1699         WMI_10_2_DCS_INTERFERENCE_EVENTID,
1700         WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1701         WMI_10_2_GPIO_INPUT_EVENTID,
1702         WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1703         WMI_10_2_GENERIC_BUFFER_EVENTID,
1704         WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1705         WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1706         WMI_10_2_WDS_PEER_EVENTID,
1707         WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1708         WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1709         WMI_10_2_MU_REPORT_EVENTID,
1710         WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1711         WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1712 };
1713
1714 enum wmi_10_4_cmd_id {
1715         WMI_10_4_START_CMDID = 0x9000,
1716         WMI_10_4_END_CMDID = 0x9FFF,
1717         WMI_10_4_INIT_CMDID,
1718         WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1719         WMI_10_4_STOP_SCAN_CMDID,
1720         WMI_10_4_SCAN_CHAN_LIST_CMDID,
1721         WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1722         WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1723         WMI_10_4_ECHO_CMDID,
1724         WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1725         WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1726         WMI_10_4_PDEV_SET_PARAM_CMDID,
1727         WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1728         WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1729         WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1730         WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1731         WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1732         WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1733         WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1734         WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1735         WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1736         WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1737         WMI_10_4_VDEV_CREATE_CMDID,
1738         WMI_10_4_VDEV_DELETE_CMDID,
1739         WMI_10_4_VDEV_START_REQUEST_CMDID,
1740         WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1741         WMI_10_4_VDEV_UP_CMDID,
1742         WMI_10_4_VDEV_STOP_CMDID,
1743         WMI_10_4_VDEV_DOWN_CMDID,
1744         WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1745         WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1746         WMI_10_4_VDEV_SET_PARAM_CMDID,
1747         WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1748         WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1749         WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1750         WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1751         WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1752         WMI_10_4_PEER_CREATE_CMDID,
1753         WMI_10_4_PEER_DELETE_CMDID,
1754         WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1755         WMI_10_4_PEER_SET_PARAM_CMDID,
1756         WMI_10_4_PEER_ASSOC_CMDID,
1757         WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1758         WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1759         WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1760         WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1761         WMI_10_4_PEER_MCAST_GROUP_CMDID,
1762         WMI_10_4_BCN_TX_CMDID,
1763         WMI_10_4_PDEV_SEND_BCN_CMDID,
1764         WMI_10_4_BCN_PRB_TMPL_CMDID,
1765         WMI_10_4_BCN_FILTER_RX_CMDID,
1766         WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1767         WMI_10_4_MGMT_TX_CMDID,
1768         WMI_10_4_PRB_TMPL_CMDID,
1769         WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1770         WMI_10_4_ADDBA_SEND_CMDID,
1771         WMI_10_4_ADDBA_STATUS_CMDID,
1772         WMI_10_4_DELBA_SEND_CMDID,
1773         WMI_10_4_ADDBA_SET_RESP_CMDID,
1774         WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1775         WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1776         WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1777         WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1778         WMI_10_4_DBGLOG_CFG_CMDID,
1779         WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1780         WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1781         WMI_10_4_PDEV_QVIT_CMDID,
1782         WMI_10_4_ROAM_SCAN_MODE,
1783         WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1784         WMI_10_4_ROAM_SCAN_PERIOD,
1785         WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1786         WMI_10_4_ROAM_AP_PROFILE,
1787         WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1788         WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1789         WMI_10_4_OFL_SCAN_PERIOD,
1790         WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1791         WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1792         WMI_10_4_P2P_GO_SET_BEACON_IE,
1793         WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1794         WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1795         WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1796         WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1797         WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1798         WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1799         WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1800         WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1801         WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1802         WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1803         WMI_10_4_PDEV_SUSPEND_CMDID,
1804         WMI_10_4_PDEV_RESUME_CMDID,
1805         WMI_10_4_ADD_BCN_FILTER_CMDID,
1806         WMI_10_4_RMV_BCN_FILTER_CMDID,
1807         WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1808         WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1809         WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1810         WMI_10_4_WOW_ENABLE_CMDID,
1811         WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1812         WMI_10_4_RTT_MEASREQ_CMDID,
1813         WMI_10_4_RTT_TSF_CMDID,
1814         WMI_10_4_RTT_KEEPALIVE_CMDID,
1815         WMI_10_4_OEM_REQ_CMDID,
1816         WMI_10_4_NAN_CMDID,
1817         WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1818         WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1819         WMI_10_4_REQUEST_STATS_CMDID,
1820         WMI_10_4_GPIO_CONFIG_CMDID,
1821         WMI_10_4_GPIO_OUTPUT_CMDID,
1822         WMI_10_4_VDEV_RATEMASK_CMDID,
1823         WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1824         WMI_10_4_GTK_OFFLOAD_CMDID,
1825         WMI_10_4_QBOOST_CFG_CMDID,
1826         WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1827         WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1828         WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1829         WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1830         WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1831         WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1832         WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1833         WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1834         WMI_10_4_FORCE_FW_HANG_CMDID,
1835         WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1836         WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1837         WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1838         WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1839         WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1840         WMI_10_4_PDEV_FIPS_CMDID,
1841         WMI_10_4_TT_SET_CONF_CMDID,
1842         WMI_10_4_FWTEST_CMDID,
1843         WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1844         WMI_10_4_PEER_ATF_REQUEST_CMDID,
1845         WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1846         WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1847         WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1848         WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1849         WMI_10_4_PDEV_GET_TPC_CMDID,
1850         WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1851         WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1852         WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1853         WMI_10_4_PDEV_GET_INFO_CMDID,
1854         WMI_10_4_VDEV_GET_INFO_CMDID,
1855         WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1856         WMI_10_4_MU_CAL_START_CMDID,
1857         WMI_10_4_SET_CCA_PARAMS_CMDID,
1858         WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1859         WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1860         WMI_10_4_VDEV_SET_IE_CMDID,
1861         WMI_10_4_SET_LTEU_CONFIG_CMDID,
1862         WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1863         WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1864         WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1865         WMI_10_4_PEER_BWF_REQUEST_CMDID,
1866         WMI_10_4_BTCOEX_CFG_CMDID,
1867         WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1868         WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1869         WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1870         WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1871         WMI_10_4_COEX_VERSION_CFG_CMID,
1872         WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1873         WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1874         WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1875         WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1876         WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1877         WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1878         WMI_10_4_GET_TSF_TIMER_CMDID,
1879         WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1880         WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1881         WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1882         WMI_10_4_TDLS_SET_STATE_CMDID,
1883         WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1884         WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1885         WMI_10_4_PDEV_SEND_FD_CMDID,
1886         WMI_10_4_ENABLE_FILS_CMDID,
1887         WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1888         WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1889         WMI_10_4_RADAR_FOUND_CMDID,
1890         WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1891         WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1892         WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1893 };
1894
1895 enum wmi_10_4_event_id {
1896         WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1897         WMI_10_4_READY_EVENTID,
1898         WMI_10_4_DEBUG_MESG_EVENTID,
1899         WMI_10_4_START_EVENTID = 0x9000,
1900         WMI_10_4_END_EVENTID = 0x9FFF,
1901         WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1902         WMI_10_4_ECHO_EVENTID,
1903         WMI_10_4_UPDATE_STATS_EVENTID,
1904         WMI_10_4_INST_RSSI_STATS_EVENTID,
1905         WMI_10_4_VDEV_START_RESP_EVENTID,
1906         WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1907         WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1908         WMI_10_4_VDEV_STOPPED_EVENTID,
1909         WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1910         WMI_10_4_HOST_SWBA_EVENTID,
1911         WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1912         WMI_10_4_MGMT_RX_EVENTID,
1913         WMI_10_4_CHAN_INFO_EVENTID,
1914         WMI_10_4_PHYERR_EVENTID,
1915         WMI_10_4_ROAM_EVENTID,
1916         WMI_10_4_PROFILE_MATCH,
1917         WMI_10_4_DEBUG_PRINT_EVENTID,
1918         WMI_10_4_PDEV_QVIT_EVENTID,
1919         WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1920         WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1921         WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1922         WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1923         WMI_10_4_RTT_KEEPALIVE_EVENTID,
1924         WMI_10_4_OEM_CAPABILITY_EVENTID,
1925         WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1926         WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1927         WMI_10_4_NAN_EVENTID,
1928         WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1929         WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1930         WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1931         WMI_10_4_DCS_INTERFERENCE_EVENTID,
1932         WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1933         WMI_10_4_CSA_HANDLING_EVENTID,
1934         WMI_10_4_GPIO_INPUT_EVENTID,
1935         WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1936         WMI_10_4_GENERIC_BUFFER_EVENTID,
1937         WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1938         WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1939         WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1940         WMI_10_4_WDS_PEER_EVENTID,
1941         WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1942         WMI_10_4_PDEV_FIPS_EVENTID,
1943         WMI_10_4_TT_STATS_EVENTID,
1944         WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1945         WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1946         WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1947         WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1948         WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1949         WMI_10_4_PDEV_TPC_EVENTID,
1950         WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1951         WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1952         WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1953         WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1954         WMI_10_4_MU_REPORT_EVENTID,
1955         WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1956         WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1957         WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1958         WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1959         WMI_10_4_ATF_PEER_STATS_EVENTID,
1960         WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1961         WMI_10_4_NAC_RSSI_EVENTID,
1962         WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1963         WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1964         WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1965         WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1966         WMI_10_4_TDLS_PEER_EVENTID,
1967         WMI_10_4_HOST_SWFDA_EVENTID,
1968         WMI_10_4_ESP_ESTIMATE_EVENTID,
1969         WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1970         WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1971 };
1972
1973 enum wmi_phy_mode {
1974         MODE_11A        = 0,   /* 11a Mode */
1975         MODE_11G        = 1,   /* 11b/g Mode */
1976         MODE_11B        = 2,   /* 11b Mode */
1977         MODE_11GONLY    = 3,   /* 11g only Mode */
1978         MODE_11NA_HT20   = 4,  /* 11a HT20 mode */
1979         MODE_11NG_HT20   = 5,  /* 11g HT20 mode */
1980         MODE_11NA_HT40   = 6,  /* 11a HT40 mode */
1981         MODE_11NG_HT40   = 7,  /* 11g HT40 mode */
1982         MODE_11AC_VHT20 = 8,
1983         MODE_11AC_VHT40 = 9,
1984         MODE_11AC_VHT80 = 10,
1985         /*    MODE_11AC_VHT160 = 11, */
1986         MODE_11AC_VHT20_2G = 11,
1987         MODE_11AC_VHT40_2G = 12,
1988         MODE_11AC_VHT80_2G = 13,
1989         MODE_11AC_VHT80_80 = 14,
1990         MODE_11AC_VHT160 = 15,
1991         MODE_UNKNOWN    = 16,
1992         MODE_MAX        = 16
1993 };
1994
1995 static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1996 {
1997         switch (mode) {
1998         case MODE_11A:
1999                 return "11a";
2000         case MODE_11G:
2001                 return "11g";
2002         case MODE_11B:
2003                 return "11b";
2004         case MODE_11GONLY:
2005                 return "11gonly";
2006         case MODE_11NA_HT20:
2007                 return "11na-ht20";
2008         case MODE_11NG_HT20:
2009                 return "11ng-ht20";
2010         case MODE_11NA_HT40:
2011                 return "11na-ht40";
2012         case MODE_11NG_HT40:
2013                 return "11ng-ht40";
2014         case MODE_11AC_VHT20:
2015                 return "11ac-vht20";
2016         case MODE_11AC_VHT40:
2017                 return "11ac-vht40";
2018         case MODE_11AC_VHT80:
2019                 return "11ac-vht80";
2020         case MODE_11AC_VHT160:
2021                 return "11ac-vht160";
2022         case MODE_11AC_VHT80_80:
2023                 return "11ac-vht80+80";
2024         case MODE_11AC_VHT20_2G:
2025                 return "11ac-vht20-2g";
2026         case MODE_11AC_VHT40_2G:
2027                 return "11ac-vht40-2g";
2028         case MODE_11AC_VHT80_2G:
2029                 return "11ac-vht80-2g";
2030         case MODE_UNKNOWN:
2031                 /* skip */
2032                 break;
2033
2034                 /* no default handler to allow compiler to check that the
2035                  * enum is fully handled
2036                  */
2037         }
2038
2039         return "<unknown>";
2040 }
2041
2042 #define WMI_CHAN_LIST_TAG       0x1
2043 #define WMI_SSID_LIST_TAG       0x2
2044 #define WMI_BSSID_LIST_TAG      0x3
2045 #define WMI_IE_TAG              0x4
2046
2047 struct wmi_channel {
2048         __le32 mhz;
2049         __le32 band_center_freq1;
2050         __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2051         union {
2052                 __le32 flags; /* WMI_CHAN_FLAG_ */
2053                 struct {
2054                         u8 mode; /* only 6 LSBs */
2055                 } __packed;
2056         } __packed;
2057         union {
2058                 __le32 reginfo0;
2059                 struct {
2060                         /* note: power unit is 0.5 dBm */
2061                         u8 min_power;
2062                         u8 max_power;
2063                         u8 reg_power;
2064                         u8 reg_classid;
2065                 } __packed;
2066         } __packed;
2067         union {
2068                 __le32 reginfo1;
2069                 struct {
2070                         /* note: power unit is 1 dBm */
2071                         u8 antenna_max;
2072                         /* note: power unit is 0.5 dBm */
2073                         u8 max_tx_power;
2074                 } __packed;
2075         } __packed;
2076 } __packed;
2077
2078 struct wmi_channel_arg {
2079         u32 freq;
2080         u32 band_center_freq1;
2081         u32 band_center_freq2;
2082         bool passive;
2083         bool allow_ibss;
2084         bool allow_ht;
2085         bool allow_vht;
2086         bool ht40plus;
2087         bool chan_radar;
2088         /* note: power unit is 0.5 dBm */
2089         u32 min_power;
2090         u32 max_power;
2091         u32 max_reg_power;
2092         /* note: power unit is 1 dBm */
2093         u32 max_antenna_gain;
2094         u32 reg_class_id;
2095         enum wmi_phy_mode mode;
2096 };
2097
2098 enum wmi_channel_change_cause {
2099         WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2100         WMI_CHANNEL_CHANGE_CAUSE_CSA,
2101 };
2102
2103 #define WMI_CHAN_FLAG_HT40_PLUS      (1 << 6)
2104 #define WMI_CHAN_FLAG_PASSIVE        (1 << 7)
2105 #define WMI_CHAN_FLAG_ADHOC_ALLOWED  (1 << 8)
2106 #define WMI_CHAN_FLAG_AP_DISABLED    (1 << 9)
2107 #define WMI_CHAN_FLAG_DFS            (1 << 10)
2108 #define WMI_CHAN_FLAG_ALLOW_HT       (1 << 11)
2109 #define WMI_CHAN_FLAG_ALLOW_VHT      (1 << 12)
2110
2111 /* Indicate reason for channel switch */
2112 #define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2113 /* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2114 #define WMI_CHAN_FLAG_DFS_CFREQ2  (1 << 15)
2115 #define WMI_MAX_SPATIAL_STREAM        3 /* default max ss */
2116
2117 /* HT Capabilities*/
2118 #define WMI_HT_CAP_ENABLED                0x0001   /* HT Enabled/ disabled */
2119 #define WMI_HT_CAP_HT20_SGI       0x0002   /* Short Guard Interval with HT20 */
2120 #define WMI_HT_CAP_DYNAMIC_SMPS           0x0004   /* Dynamic MIMO powersave */
2121 #define WMI_HT_CAP_TX_STBC                0x0008   /* B3 TX STBC */
2122 #define WMI_HT_CAP_TX_STBC_MASK_SHIFT     3
2123 #define WMI_HT_CAP_RX_STBC                0x0030   /* B4-B5 RX STBC */
2124 #define WMI_HT_CAP_RX_STBC_MASK_SHIFT     4
2125 #define WMI_HT_CAP_LDPC                   0x0040   /* LDPC supported */
2126 #define WMI_HT_CAP_L_SIG_TXOP_PROT        0x0080   /* L-SIG TXOP Protection */
2127 #define WMI_HT_CAP_MPDU_DENSITY           0x0700   /* MPDU Density */
2128 #define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2129 #define WMI_HT_CAP_HT40_SGI               0x0800
2130 #define WMI_HT_CAP_RX_LDPC                0x1000   /* LDPC RX support */
2131 #define WMI_HT_CAP_TX_LDPC                0x2000   /* LDPC TX support */
2132
2133 #define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED       | \
2134                                 WMI_HT_CAP_HT20_SGI      | \
2135                                 WMI_HT_CAP_HT40_SGI      | \
2136                                 WMI_HT_CAP_TX_STBC       | \
2137                                 WMI_HT_CAP_RX_STBC       | \
2138                                 WMI_HT_CAP_LDPC)
2139
2140 /*
2141  * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2142  * field. The fields not defined here are not supported, or reserved.
2143  * Do not change these masks and if you have to add new one follow the
2144  * bitmask as specified by 802.11ac draft.
2145  */
2146
2147 #define WMI_VHT_CAP_MAX_MPDU_LEN_MASK            0x00000003
2148 #define WMI_VHT_CAP_RX_LDPC                      0x00000010
2149 #define WMI_VHT_CAP_SGI_80MHZ                    0x00000020
2150 #define WMI_VHT_CAP_SGI_160MHZ                   0x00000040
2151 #define WMI_VHT_CAP_TX_STBC                      0x00000080
2152 #define WMI_VHT_CAP_RX_STBC_MASK                 0x00000300
2153 #define WMI_VHT_CAP_RX_STBC_MASK_SHIFT           8
2154 #define WMI_VHT_CAP_SU_BFER                      0x00000800
2155 #define WMI_VHT_CAP_SU_BFEE                      0x00001000
2156 #define WMI_VHT_CAP_MAX_CS_ANT_MASK              0x0000E000
2157 #define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT        13
2158 #define WMI_VHT_CAP_MAX_SND_DIM_MASK             0x00070000
2159 #define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT       16
2160 #define WMI_VHT_CAP_MU_BFER                      0x00080000
2161 #define WMI_VHT_CAP_MU_BFEE                      0x00100000
2162 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP            0x03800000
2163 #define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT      23
2164 #define WMI_VHT_CAP_RX_FIXED_ANT                 0x10000000
2165 #define WMI_VHT_CAP_TX_FIXED_ANT                 0x20000000
2166
2167 /* The following also refer for max HT AMSDU */
2168 #define WMI_VHT_CAP_MAX_MPDU_LEN_3839            0x00000000
2169 #define WMI_VHT_CAP_MAX_MPDU_LEN_7935            0x00000001
2170 #define WMI_VHT_CAP_MAX_MPDU_LEN_11454           0x00000002
2171
2172 #define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
2173                                  WMI_VHT_CAP_RX_LDPC             | \
2174                                  WMI_VHT_CAP_SGI_80MHZ           | \
2175                                  WMI_VHT_CAP_TX_STBC             | \
2176                                  WMI_VHT_CAP_RX_STBC_MASK        | \
2177                                  WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   | \
2178                                  WMI_VHT_CAP_RX_FIXED_ANT        | \
2179                                  WMI_VHT_CAP_TX_FIXED_ANT)
2180
2181 /*
2182  * Interested readers refer to Rx/Tx MCS Map definition as defined in
2183  * 802.11ac
2184  */
2185 #define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss)      ((3 & (r)) << (((ss) - 1) << 1))
2186 #define WMI_VHT_MAX_SUPP_RATE_MASK           0x1fff0000
2187 #define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT     16
2188
2189 enum {
2190         REGDMN_MODE_11A              = 0x00001, /* 11a channels */
2191         REGDMN_MODE_TURBO            = 0x00002, /* 11a turbo-only channels */
2192         REGDMN_MODE_11B              = 0x00004, /* 11b channels */
2193         REGDMN_MODE_PUREG            = 0x00008, /* 11g channels (OFDM only) */
2194         REGDMN_MODE_11G              = 0x00008, /* XXX historical */
2195         REGDMN_MODE_108G             = 0x00020, /* 11a+Turbo channels */
2196         REGDMN_MODE_108A             = 0x00040, /* 11g+Turbo channels */
2197         REGDMN_MODE_XR               = 0x00100, /* XR channels */
2198         REGDMN_MODE_11A_HALF_RATE    = 0x00200, /* 11A half rate channels */
2199         REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2200         REGDMN_MODE_11NG_HT20        = 0x00800, /* 11N-G HT20 channels */
2201         REGDMN_MODE_11NA_HT20        = 0x01000, /* 11N-A HT20 channels */
2202         REGDMN_MODE_11NG_HT40PLUS    = 0x02000, /* 11N-G HT40 + channels */
2203         REGDMN_MODE_11NG_HT40MINUS   = 0x04000, /* 11N-G HT40 - channels */
2204         REGDMN_MODE_11NA_HT40PLUS    = 0x08000, /* 11N-A HT40 + channels */
2205         REGDMN_MODE_11NA_HT40MINUS   = 0x10000, /* 11N-A HT40 - channels */
2206         REGDMN_MODE_11AC_VHT20       = 0x20000, /* 5Ghz, VHT20 */
2207         REGDMN_MODE_11AC_VHT40PLUS   = 0x40000, /* 5Ghz, VHT40 + channels */
2208         REGDMN_MODE_11AC_VHT40MINUS  = 0x80000, /* 5Ghz  VHT40 - channels */
2209         REGDMN_MODE_11AC_VHT80       = 0x100000, /* 5Ghz, VHT80 channels */
2210         REGDMN_MODE_11AC_VHT160      = 0x200000,     /* 5Ghz, VHT160 channels */
2211         REGDMN_MODE_11AC_VHT80_80    = 0x400000,     /* 5Ghz, VHT80+80 channels */
2212         REGDMN_MODE_ALL              = 0xffffffff
2213 };
2214
2215 #define REGDMN_CAP1_CHAN_HALF_RATE        0x00000001
2216 #define REGDMN_CAP1_CHAN_QUARTER_RATE     0x00000002
2217 #define REGDMN_CAP1_CHAN_HAL49GHZ         0x00000004
2218
2219 /* regulatory capabilities */
2220 #define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND   0x0040
2221 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN    0x0080
2222 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U2         0x0100
2223 #define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND    0x0200
2224 #define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD     0x0400
2225 #define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A    0x0800
2226
2227 struct hal_reg_capabilities {
2228         /* regdomain value specified in EEPROM */
2229         __le32 eeprom_rd;
2230         /*regdomain */
2231         __le32 eeprom_rd_ext;
2232         /* CAP1 capabilities bit map. */
2233         __le32 regcap1;
2234         /* REGDMN EEPROM CAP. */
2235         __le32 regcap2;
2236         /* REGDMN MODE */
2237         __le32 wireless_modes;
2238         __le32 low_2ghz_chan;
2239         __le32 high_2ghz_chan;
2240         __le32 low_5ghz_chan;
2241         __le32 high_5ghz_chan;
2242 } __packed;
2243
2244 enum wlan_mode_capability {
2245         WHAL_WLAN_11A_CAPABILITY   = 0x1,
2246         WHAL_WLAN_11G_CAPABILITY   = 0x2,
2247         WHAL_WLAN_11AG_CAPABILITY  = 0x3,
2248 };
2249
2250 /* structure used by FW for requesting host memory */
2251 struct wlan_host_mem_req {
2252         /* ID of the request */
2253         __le32 req_id;
2254         /* size of the  of each unit */
2255         __le32 unit_size;
2256         /* flags to  indicate that
2257          * the number units is dependent
2258          * on number of resources(num vdevs num peers .. etc)
2259          */
2260         __le32 num_unit_info;
2261         /*
2262          * actual number of units to allocate . if flags in the num_unit_info
2263          * indicate that number of units is tied to number of a particular
2264          * resource to allocate then  num_units filed is set to 0 and host
2265          * will derive the number units from number of the resources it is
2266          * requesting.
2267          */
2268         __le32 num_units;
2269 } __packed;
2270
2271 /*
2272  * The following struct holds optional payload for
2273  * wmi_service_ready_event,e.g., 11ac pass some of the
2274  * device capability to the host.
2275  */
2276 struct wmi_service_ready_event {
2277         __le32 sw_version;
2278         __le32 sw_version_1;
2279         __le32 abi_version;
2280         /* WMI_PHY_CAPABILITY */
2281         __le32 phy_capability;
2282         /* Maximum number of frag table entries that SW will populate less 1 */
2283         __le32 max_frag_entry;
2284         __le32 wmi_service_bitmap[16];
2285         __le32 num_rf_chains;
2286         /*
2287          * The following field is only valid for service type
2288          * WMI_SERVICE_11AC
2289          */
2290         __le32 ht_cap_info; /* WMI HT Capability */
2291         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2292         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2293         __le32 hw_min_tx_power;
2294         __le32 hw_max_tx_power;
2295         struct hal_reg_capabilities hal_reg_capabilities;
2296         __le32 sys_cap_info;
2297         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2298         /*
2299          * Max beacon and Probe Response IE offload size
2300          * (includes optional P2P IEs)
2301          */
2302         __le32 max_bcn_ie_size;
2303         /*
2304          * request to host to allocate a chuck of memory and pss it down to FW
2305          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2306          * data structures. Only valid for low latency interfaces like PCIE
2307          * where FW can access this memory directly (or) by DMA.
2308          */
2309         __le32 num_mem_reqs;
2310         struct wlan_host_mem_req mem_reqs[];
2311 } __packed;
2312
2313 /* This is the definition from 10.X firmware branch */
2314 struct wmi_10x_service_ready_event {
2315         __le32 sw_version;
2316         __le32 abi_version;
2317
2318         /* WMI_PHY_CAPABILITY */
2319         __le32 phy_capability;
2320
2321         /* Maximum number of frag table entries that SW will populate less 1 */
2322         __le32 max_frag_entry;
2323         __le32 wmi_service_bitmap[16];
2324         __le32 num_rf_chains;
2325
2326         /*
2327          * The following field is only valid for service type
2328          * WMI_SERVICE_11AC
2329          */
2330         __le32 ht_cap_info; /* WMI HT Capability */
2331         __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2332         __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2333         __le32 hw_min_tx_power;
2334         __le32 hw_max_tx_power;
2335
2336         struct hal_reg_capabilities hal_reg_capabilities;
2337
2338         __le32 sys_cap_info;
2339         __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2340
2341         /*
2342          * request to host to allocate a chuck of memory and pss it down to FW
2343          * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2344          * data structures. Only valid for low latency interfaces like PCIE
2345          * where FW can access this memory directly (or) by DMA.
2346          */
2347         __le32 num_mem_reqs;
2348
2349         struct wlan_host_mem_req mem_reqs[];
2350 } __packed;
2351
2352 #define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2353 #define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2354
2355 struct wmi_ready_event {
2356         __le32 sw_version;
2357         __le32 abi_version;
2358         struct wmi_mac_addr mac_addr;
2359         __le32 status;
2360 } __packed;
2361
2362 struct wmi_resource_config {
2363         /* number of virtual devices (VAPs) to support */
2364         __le32 num_vdevs;
2365
2366         /* number of peer nodes to support */
2367         __le32 num_peers;
2368
2369         /*
2370          * In offload mode target supports features like WOW, chatter and
2371          * other protocol offloads. In order to support them some
2372          * functionalities like reorder buffering, PN checking need to be
2373          * done in target. This determines maximum number of peers supported
2374          * by target in offload mode
2375          */
2376         __le32 num_offload_peers;
2377
2378         /* For target-based RX reordering */
2379         __le32 num_offload_reorder_bufs;
2380
2381         /* number of keys per peer */
2382         __le32 num_peer_keys;
2383
2384         /* total number of TX/RX data TIDs */
2385         __le32 num_tids;
2386
2387         /*
2388          * max skid for resolving hash collisions
2389          *
2390          *   The address search table is sparse, so that if two MAC addresses
2391          *   result in the same hash value, the second of these conflicting
2392          *   entries can slide to the next index in the address search table,
2393          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2394          *   specifies the upper bound on how many subsequent indices to search
2395          *   over to find an unoccupied space.
2396          */
2397         __le32 ast_skid_limit;
2398
2399         /*
2400          * the nominal chain mask for transmit
2401          *
2402          *   The chain mask may be modified dynamically, e.g. to operate AP
2403          *   tx with a reduced number of chains if no clients are associated.
2404          *   This configuration parameter specifies the nominal chain-mask that
2405          *   should be used when not operating with a reduced set of tx chains.
2406          */
2407         __le32 tx_chain_mask;
2408
2409         /*
2410          * the nominal chain mask for receive
2411          *
2412          *   The chain mask may be modified dynamically, e.g. for a client
2413          *   to use a reduced number of chains for receive if the traffic to
2414          *   the client is low enough that it doesn't require downlink MIMO
2415          *   or antenna diversity.
2416          *   This configuration parameter specifies the nominal chain-mask that
2417          *   should be used when not operating with a reduced set of rx chains.
2418          */
2419         __le32 rx_chain_mask;
2420
2421         /*
2422          * what rx reorder timeout (ms) to use for the AC
2423          *
2424          *   Each WMM access class (voice, video, best-effort, background) will
2425          *   have its own timeout value to dictate how long to wait for missing
2426          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2427          *   already been received.
2428          *   This parameter specifies the timeout in milliseconds for each
2429          *   class.
2430          */
2431         __le32 rx_timeout_pri_vi;
2432         __le32 rx_timeout_pri_vo;
2433         __le32 rx_timeout_pri_be;
2434         __le32 rx_timeout_pri_bk;
2435
2436         /*
2437          * what mode the rx should decap packets to
2438          *
2439          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2440          *   THis setting also determines the default TX behavior, however TX
2441          *   behavior can be modified on a per VAP basis during VAP init
2442          */
2443         __le32 rx_decap_mode;
2444
2445         /* what is the maximum number of scan requests that can be queued */
2446         __le32 scan_max_pending_reqs;
2447
2448         /* maximum VDEV that could use BMISS offload */
2449         __le32 bmiss_offload_max_vdev;
2450
2451         /* maximum VDEV that could use offload roaming */
2452         __le32 roam_offload_max_vdev;
2453
2454         /* maximum AP profiles that would push to offload roaming */
2455         __le32 roam_offload_max_ap_profiles;
2456
2457         /*
2458          * how many groups to use for mcast->ucast conversion
2459          *
2460          *   The target's WAL maintains a table to hold information regarding
2461          *   which peers belong to a given multicast group, so that if
2462          *   multicast->unicast conversion is enabled, the target can convert
2463          *   multicast tx frames to a series of unicast tx frames, to each
2464          *   peer within the multicast group.
2465              This num_mcast_groups configuration parameter tells the target how
2466          *   many multicast groups to provide storage for within its multicast
2467          *   group membership table.
2468          */
2469         __le32 num_mcast_groups;
2470
2471         /*
2472          * size to alloc for the mcast membership table
2473          *
2474          *   This num_mcast_table_elems configuration parameter tells the
2475          *   target how many peer elements it needs to provide storage for in
2476          *   its multicast group membership table.
2477          *   These multicast group membership table elements are shared by the
2478          *   multicast groups stored within the table.
2479          */
2480         __le32 num_mcast_table_elems;
2481
2482         /*
2483          * whether/how to do multicast->unicast conversion
2484          *
2485          *   This configuration parameter specifies whether the target should
2486          *   perform multicast --> unicast conversion on transmit, and if so,
2487          *   what to do if it finds no entries in its multicast group
2488          *   membership table for the multicast IP address in the tx frame.
2489          *   Configuration value:
2490          *   0 -> Do not perform multicast to unicast conversion.
2491          *   1 -> Convert multicast frames to unicast, if the IP multicast
2492          *        address from the tx frame is found in the multicast group
2493          *        membership table.  If the IP multicast address is not found,
2494          *        drop the frame.
2495          *   2 -> Convert multicast frames to unicast, if the IP multicast
2496          *        address from the tx frame is found in the multicast group
2497          *        membership table.  If the IP multicast address is not found,
2498          *        transmit the frame as multicast.
2499          */
2500         __le32 mcast2ucast_mode;
2501
2502         /*
2503          * how much memory to allocate for a tx PPDU dbg log
2504          *
2505          *   This parameter controls how much memory the target will allocate
2506          *   to store a log of tx PPDU meta-information (how large the PPDU
2507          *   was, when it was sent, whether it was successful, etc.)
2508          */
2509         __le32 tx_dbg_log_size;
2510
2511         /* how many AST entries to be allocated for WDS */
2512         __le32 num_wds_entries;
2513
2514         /*
2515          * MAC DMA burst size, e.g., For target PCI limit can be
2516          * 0 -default, 1 256B
2517          */
2518         __le32 dma_burst_size;
2519
2520         /*
2521          * Fixed delimiters to be inserted after every MPDU to
2522          * account for interface latency to avoid underrun.
2523          */
2524         __le32 mac_aggr_delim;
2525
2526         /*
2527          *   determine whether target is responsible for detecting duplicate
2528          *   non-aggregate MPDU and timing out stale fragments.
2529          *
2530          *   A-MPDU reordering is always performed on the target.
2531          *
2532          *   0: target responsible for frag timeout and dup checking
2533          *   1: host responsible for frag timeout and dup checking
2534          */
2535         __le32 rx_skip_defrag_timeout_dup_detection_check;
2536
2537         /*
2538          * Configuration for VoW :
2539          * No of Video Nodes to be supported
2540          * and Max no of descriptors for each Video link (node).
2541          */
2542         __le32 vow_config;
2543
2544         /* maximum VDEV that could use GTK offload */
2545         __le32 gtk_offload_max_vdev;
2546
2547         /* Number of msdu descriptors target should use */
2548         __le32 num_msdu_desc;
2549
2550         /*
2551          * Max. number of Tx fragments per MSDU
2552          *  This parameter controls the max number of Tx fragments per MSDU.
2553          *  This is sent by the target as part of the WMI_SERVICE_READY event
2554          *  and is overridden by the OS shim as required.
2555          */
2556         __le32 max_frag_entries;
2557 } __packed;
2558
2559 struct wmi_resource_config_10x {
2560         /* number of virtual devices (VAPs) to support */
2561         __le32 num_vdevs;
2562
2563         /* number of peer nodes to support */
2564         __le32 num_peers;
2565
2566         /* number of keys per peer */
2567         __le32 num_peer_keys;
2568
2569         /* total number of TX/RX data TIDs */
2570         __le32 num_tids;
2571
2572         /*
2573          * max skid for resolving hash collisions
2574          *
2575          *   The address search table is sparse, so that if two MAC addresses
2576          *   result in the same hash value, the second of these conflicting
2577          *   entries can slide to the next index in the address search table,
2578          *   and use it, if it is unoccupied.  This ast_skid_limit parameter
2579          *   specifies the upper bound on how many subsequent indices to search
2580          *   over to find an unoccupied space.
2581          */
2582         __le32 ast_skid_limit;
2583
2584         /*
2585          * the nominal chain mask for transmit
2586          *
2587          *   The chain mask may be modified dynamically, e.g. to operate AP
2588          *   tx with a reduced number of chains if no clients are associated.
2589          *   This configuration parameter specifies the nominal chain-mask that
2590          *   should be used when not operating with a reduced set of tx chains.
2591          */
2592         __le32 tx_chain_mask;
2593
2594         /*
2595          * the nominal chain mask for receive
2596          *
2597          *   The chain mask may be modified dynamically, e.g. for a client
2598          *   to use a reduced number of chains for receive if the traffic to
2599          *   the client is low enough that it doesn't require downlink MIMO
2600          *   or antenna diversity.
2601          *   This configuration parameter specifies the nominal chain-mask that
2602          *   should be used when not operating with a reduced set of rx chains.
2603          */
2604         __le32 rx_chain_mask;
2605
2606         /*
2607          * what rx reorder timeout (ms) to use for the AC
2608          *
2609          *   Each WMM access class (voice, video, best-effort, background) will
2610          *   have its own timeout value to dictate how long to wait for missing
2611          *   rx MPDUs to arrive before flushing subsequent MPDUs that have
2612          *   already been received.
2613          *   This parameter specifies the timeout in milliseconds for each
2614          *   class.
2615          */
2616         __le32 rx_timeout_pri_vi;
2617         __le32 rx_timeout_pri_vo;
2618         __le32 rx_timeout_pri_be;
2619         __le32 rx_timeout_pri_bk;
2620
2621         /*
2622          * what mode the rx should decap packets to
2623          *
2624          *   MAC can decap to RAW (no decap), native wifi or Ethernet types
2625          *   THis setting also determines the default TX behavior, however TX
2626          *   behavior can be modified on a per VAP basis during VAP init
2627          */
2628         __le32 rx_decap_mode;
2629
2630         /* what is the maximum number of scan requests that can be queued */
2631         __le32 scan_max_pending_reqs;
2632
2633         /* maximum VDEV that could use BMISS offload */
2634         __le32 bmiss_offload_max_vdev;
2635
2636         /* maximum VDEV that could use offload roaming */
2637         __le32 roam_offload_max_vdev;
2638
2639         /* maximum AP profiles that would push to offload roaming */
2640         __le32 roam_offload_max_ap_profiles;
2641
2642         /*
2643          * how many groups to use for mcast->ucast conversion
2644          *
2645          *   The target's WAL maintains a table to hold information regarding
2646          *   which peers belong to a given multicast group, so that if
2647          *   multicast->unicast conversion is enabled, the target can convert
2648          *   multicast tx frames to a series of unicast tx frames, to each
2649          *   peer within the multicast group.
2650              This num_mcast_groups configuration parameter tells the target how
2651          *   many multicast groups to provide storage for within its multicast
2652          *   group membership table.
2653          */
2654         __le32 num_mcast_groups;
2655
2656         /*
2657          * size to alloc for the mcast membership table
2658          *
2659          *   This num_mcast_table_elems configuration parameter tells the
2660          *   target how many peer elements it needs to provide storage for in
2661          *   its multicast group membership table.
2662          *   These multicast group membership table elements are shared by the
2663          *   multicast groups stored within the table.
2664          */
2665         __le32 num_mcast_table_elems;
2666
2667         /*
2668          * whether/how to do multicast->unicast conversion
2669          *
2670          *   This configuration parameter specifies whether the target should
2671          *   perform multicast --> unicast conversion on transmit, and if so,
2672          *   what to do if it finds no entries in its multicast group
2673          *   membership table for the multicast IP address in the tx frame.
2674          *   Configuration value:
2675          *   0 -> Do not perform multicast to unicast conversion.
2676          *   1 -> Convert multicast frames to unicast, if the IP multicast
2677          *        address from the tx frame is found in the multicast group
2678          *        membership table.  If the IP multicast address is not found,
2679          *        drop the frame.
2680          *   2 -> Convert multicast frames to unicast, if the IP multicast
2681          *        address from the tx frame is found in the multicast group
2682          *        membership table.  If the IP multicast address is not found,
2683          *        transmit the frame as multicast.
2684          */
2685         __le32 mcast2ucast_mode;
2686
2687         /*
2688          * how much memory to allocate for a tx PPDU dbg log
2689          *
2690          *   This parameter controls how much memory the target will allocate
2691          *   to store a log of tx PPDU meta-information (how large the PPDU
2692          *   was, when it was sent, whether it was successful, etc.)
2693          */
2694         __le32 tx_dbg_log_size;
2695
2696         /* how many AST entries to be allocated for WDS */
2697         __le32 num_wds_entries;
2698
2699         /*
2700          * MAC DMA burst size, e.g., For target PCI limit can be
2701          * 0 -default, 1 256B
2702          */
2703         __le32 dma_burst_size;
2704
2705         /*
2706          * Fixed delimiters to be inserted after every MPDU to
2707          * account for interface latency to avoid underrun.
2708          */
2709         __le32 mac_aggr_delim;
2710
2711         /*
2712          *   determine whether target is responsible for detecting duplicate
2713          *   non-aggregate MPDU and timing out stale fragments.
2714          *
2715          *   A-MPDU reordering is always performed on the target.
2716          *
2717          *   0: target responsible for frag timeout and dup checking
2718          *   1: host responsible for frag timeout and dup checking
2719          */
2720         __le32 rx_skip_defrag_timeout_dup_detection_check;
2721
2722         /*
2723          * Configuration for VoW :
2724          * No of Video Nodes to be supported
2725          * and Max no of descriptors for each Video link (node).
2726          */
2727         __le32 vow_config;
2728
2729         /* Number of msdu descriptors target should use */
2730         __le32 num_msdu_desc;
2731
2732         /*
2733          * Max. number of Tx fragments per MSDU
2734          *  This parameter controls the max number of Tx fragments per MSDU.
2735          *  This is sent by the target as part of the WMI_SERVICE_READY event
2736          *  and is overridden by the OS shim as required.
2737          */
2738         __le32 max_frag_entries;
2739 } __packed;
2740
2741 enum wmi_10_2_feature_mask {
2742         WMI_10_2_RX_BATCH_MODE = BIT(0),
2743         WMI_10_2_ATF_CONFIG    = BIT(1),
2744         WMI_10_2_COEX_GPIO     = BIT(3),
2745         WMI_10_2_BSS_CHAN_INFO = BIT(6),
2746         WMI_10_2_PEER_STATS    = BIT(7),
2747 };
2748
2749 struct wmi_resource_config_10_2 {
2750         struct wmi_resource_config_10x common;
2751         __le32 max_peer_ext_stats;
2752         __le32 smart_ant_cap; /* 0-disable, 1-enable */
2753         __le32 bk_min_free;
2754         __le32 be_min_free;
2755         __le32 vi_min_free;
2756         __le32 vo_min_free;
2757         __le32 feature_mask;
2758 } __packed;
2759
2760 #define NUM_UNITS_IS_NUM_VDEVS         BIT(0)
2761 #define NUM_UNITS_IS_NUM_PEERS         BIT(1)
2762 #define NUM_UNITS_IS_NUM_ACTIVE_PEERS  BIT(2)
2763
2764 struct wmi_resource_config_10_4 {
2765         /* Number of virtual devices (VAPs) to support */
2766         __le32 num_vdevs;
2767
2768         /* Number of peer nodes to support */
2769         __le32 num_peers;
2770
2771         /* Number of active peer nodes to support */
2772         __le32 num_active_peers;
2773
2774         /* In offload mode, target supports features like WOW, chatter and other
2775          * protocol offloads. In order to support them some functionalities like
2776          * reorder buffering, PN checking need to be done in target.
2777          * This determines maximum number of peers supported by target in
2778          * offload mode.
2779          */
2780         __le32 num_offload_peers;
2781
2782         /* Number of reorder buffers available for doing target based reorder
2783          * Rx reorder buffering
2784          */
2785         __le32 num_offload_reorder_buffs;
2786
2787         /* Number of keys per peer */
2788         __le32 num_peer_keys;
2789
2790         /* Total number of TX/RX data TIDs */
2791         __le32 num_tids;
2792
2793         /* Max skid for resolving hash collisions.
2794          * The address search table is sparse, so that if two MAC addresses
2795          * result in the same hash value, the second of these conflicting
2796          * entries can slide to the next index in the address search table,
2797          * and use it, if it is unoccupied.  This ast_skid_limit parameter
2798          * specifies the upper bound on how many subsequent indices to search
2799          * over to find an unoccupied space.
2800          */
2801         __le32 ast_skid_limit;
2802
2803         /* The nominal chain mask for transmit.
2804          * The chain mask may be modified dynamically, e.g. to operate AP tx
2805          * with a reduced number of chains if no clients are associated.
2806          * This configuration parameter specifies the nominal chain-mask that
2807          * should be used when not operating with a reduced set of tx chains.
2808          */
2809         __le32 tx_chain_mask;
2810
2811         /* The nominal chain mask for receive.
2812          * The chain mask may be modified dynamically, e.g. for a client to use
2813          * a reduced number of chains for receive if the traffic to the client
2814          * is low enough that it doesn't require downlink MIMO or antenna
2815          * diversity. This configuration parameter specifies the nominal
2816          * chain-mask that should be used when not operating with a reduced
2817          * set of rx chains.
2818          */
2819         __le32 rx_chain_mask;
2820
2821         /* What rx reorder timeout (ms) to use for the AC.
2822          * Each WMM access class (voice, video, best-effort, background) will
2823          * have its own timeout value to dictate how long to wait for missing
2824          * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2825          * been received. This parameter specifies the timeout in milliseconds
2826          * for each class.
2827          */
2828         __le32 rx_timeout_pri[4];
2829
2830         /* What mode the rx should decap packets to.
2831          * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2832          * This setting also determines the default TX behavior, however TX
2833          * behavior can be modified on a per VAP basis during VAP init
2834          */
2835         __le32 rx_decap_mode;
2836
2837         __le32 scan_max_pending_req;
2838
2839         __le32 bmiss_offload_max_vdev;
2840
2841         __le32 roam_offload_max_vdev;
2842
2843         __le32 roam_offload_max_ap_profiles;
2844
2845         /* How many groups to use for mcast->ucast conversion.
2846          * The target's WAL maintains a table to hold information regarding
2847          * which peers belong to a given multicast group, so that if
2848          * multicast->unicast conversion is enabled, the target can convert
2849          * multicast tx frames to a series of unicast tx frames, to each peer
2850          * within the multicast group. This num_mcast_groups configuration
2851          * parameter tells the target how many multicast groups to provide
2852          * storage for within its multicast group membership table.
2853          */
2854         __le32 num_mcast_groups;
2855
2856         /* Size to alloc for the mcast membership table.
2857          * This num_mcast_table_elems configuration parameter tells the target
2858          * how many peer elements it needs to provide storage for in its
2859          * multicast group membership table. These multicast group membership
2860          * table elements are shared by the multicast groups stored within
2861          * the table.
2862          */
2863         __le32 num_mcast_table_elems;
2864
2865         /* Whether/how to do multicast->unicast conversion.
2866          * This configuration parameter specifies whether the target should
2867          * perform multicast --> unicast conversion on transmit, and if so,
2868          * what to do if it finds no entries in its multicast group membership
2869          * table for the multicast IP address in the tx frame.
2870          * Configuration value:
2871          * 0 -> Do not perform multicast to unicast conversion.
2872          * 1 -> Convert multicast frames to unicast, if the IP multicast address
2873          *      from the tx frame is found in the multicast group membership
2874          *      table.  If the IP multicast address is not found, drop the frame
2875          * 2 -> Convert multicast frames to unicast, if the IP multicast address
2876          *      from the tx frame is found in the multicast group membership
2877          *      table.  If the IP multicast address is not found, transmit the
2878          *      frame as multicast.
2879          */
2880         __le32 mcast2ucast_mode;
2881
2882         /* How much memory to allocate for a tx PPDU dbg log.
2883          * This parameter controls how much memory the target will allocate to
2884          * store a log of tx PPDU meta-information (how large the PPDU was,
2885          * when it was sent, whether it was successful, etc.)
2886          */
2887         __le32 tx_dbg_log_size;
2888
2889         /* How many AST entries to be allocated for WDS */
2890         __le32 num_wds_entries;
2891
2892         /* MAC DMA burst size. 0 -default, 1 -256B */
2893         __le32 dma_burst_size;
2894
2895         /* Fixed delimiters to be inserted after every MPDU to account for
2896          * interface latency to avoid underrun.
2897          */
2898         __le32 mac_aggr_delim;
2899
2900         /* Determine whether target is responsible for detecting duplicate
2901          * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2902          * is always performed on the target.
2903          *
2904          * 0: target responsible for frag timeout and dup checking
2905          * 1: host responsible for frag timeout and dup checking
2906          */
2907         __le32 rx_skip_defrag_timeout_dup_detection_check;
2908
2909         /* Configuration for VoW : No of Video nodes to be supported and max
2910          * no of descriptors for each video link (node).
2911          */
2912         __le32 vow_config;
2913
2914         /* Maximum vdev that could use gtk offload */
2915         __le32 gtk_offload_max_vdev;
2916
2917         /* Number of msdu descriptors target should use */
2918         __le32 num_msdu_desc;
2919
2920         /* Max number of tx fragments per MSDU.
2921          * This parameter controls the max number of tx fragments per MSDU.
2922          * This will passed by target as part of the WMI_SERVICE_READY event
2923          * and is overridden by the OS shim as required.
2924          */
2925         __le32 max_frag_entries;
2926
2927         /* Max number of extended peer stats.
2928          * This parameter controls the max number of peers for which extended
2929          * statistics are supported by target
2930          */
2931         __le32 max_peer_ext_stats;
2932
2933         /* Smart antenna capabilities information.
2934          * 1 - Smart antenna is enabled
2935          * 0 - Smart antenna is disabled
2936          * In future this can contain smart antenna specific capabilities.
2937          */
2938         __le32 smart_ant_cap;
2939
2940         /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2941          * during init.
2942          */
2943         __le32 bk_minfree;
2944         __le32 be_minfree;
2945         __le32 vi_minfree;
2946         __le32 vo_minfree;
2947
2948         /* Rx batch mode capability.
2949          * 1 - Rx batch mode enabled
2950          * 0 - Rx batch mode disabled
2951          */
2952         __le32 rx_batchmode;
2953
2954         /* Thermal throttling capability.
2955          * 1 - Capable of thermal throttling
2956          * 0 - Not capable of thermal throttling
2957          */
2958         __le32 tt_support;
2959
2960         /* ATF configuration.
2961          * 1  - Enable ATF
2962          * 0  - Disable ATF
2963          */
2964         __le32 atf_config;
2965
2966         /* Configure padding to manage IP header un-alignment
2967          * 1  - Enable padding
2968          * 0  - Disable padding
2969          */
2970         __le32 iphdr_pad_config;
2971
2972         /* qwrap configuration (bits 15-0)
2973          * 1  - This is qwrap configuration
2974          * 0  - This is not qwrap
2975          *
2976          * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2977          * In order to get ack-RSSI reporting and to specify the tx-rate for
2978          * individual frames, this option must be enabled.  This uses an extra
2979          * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2980          */
2981         __le32 qwrap_config;
2982 } __packed;
2983
2984 enum wmi_coex_version {
2985         WMI_NO_COEX_VERSION_SUPPORT     = 0,
2986         /* 3 wire coex support*/
2987         WMI_COEX_VERSION_1              = 1,
2988         /* 2.5 wire coex support*/
2989         WMI_COEX_VERSION_2              = 2,
2990         /* 2.5 wire coex with duty cycle support */
2991         WMI_COEX_VERSION_3              = 3,
2992         /* 4 wire coex support*/
2993         WMI_COEX_VERSION_4              = 4,
2994 };
2995
2996 /**
2997  * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2998  * @WMI_10_4_LTEU_SUPPORT: LTEU config
2999  * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
3000  * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
3001  * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
3002  * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
3003  * @WMI_10_4_PEER_STATS: Per station stats
3004  * @WMI_10_4_VDEV_STATS: Per vdev stats
3005  * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3006  * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3007  * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3008  * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3009  * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3010  *      enable/disable
3011  * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY: Explicit TDLS mode enable/disable
3012  * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3013  * @WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT:  Firmware supports Extended Peer
3014  *      TID configuration for QoS related settings
3015  * @WMI_10_4_REPORT_AIRTIME: Firmware supports transmit airtime reporting
3016  */
3017 enum wmi_10_4_feature_mask {
3018         WMI_10_4_LTEU_SUPPORT                   = BIT(0),
3019         WMI_10_4_COEX_GPIO_SUPPORT              = BIT(1),
3020         WMI_10_4_AUX_RADIO_SPECTRAL_INTF        = BIT(2),
3021         WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF       = BIT(3),
3022         WMI_10_4_BSS_CHANNEL_INFO_64            = BIT(4),
3023         WMI_10_4_PEER_STATS                     = BIT(5),
3024         WMI_10_4_VDEV_STATS                     = BIT(6),
3025         WMI_10_4_TDLS                           = BIT(7),
3026         WMI_10_4_TDLS_OFFCHAN                   = BIT(8),
3027         WMI_10_4_TDLS_UAPSD_BUFFER_STA          = BIT(9),
3028         WMI_10_4_TDLS_UAPSD_SLEEP_STA           = BIT(10),
3029         WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3030         WMI_10_4_TDLS_EXPLICIT_MODE_ONLY        = BIT(12),
3031         WMI_10_4_TX_DATA_ACK_RSSI               = BIT(16),
3032         WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT   = BIT(17),
3033         WMI_10_4_REPORT_AIRTIME                 = BIT(18),
3034
3035 };
3036
3037 /* WMI_GPIO_CONFIG_CMDID */
3038 enum {
3039         WMI_GPIO_PULL_NONE,
3040         WMI_GPIO_PULL_UP,
3041         WMI_GPIO_PULL_DOWN,
3042 };
3043
3044 enum {
3045         WMI_GPIO_INTTYPE_DISABLE,
3046         WMI_GPIO_INTTYPE_RISING_EDGE,
3047         WMI_GPIO_INTTYPE_FALLING_EDGE,
3048         WMI_GPIO_INTTYPE_BOTH_EDGE,
3049         WMI_GPIO_INTTYPE_LEVEL_LOW,
3050         WMI_GPIO_INTTYPE_LEVEL_HIGH
3051 };
3052
3053 /* WMI_GPIO_CONFIG_CMDID */
3054 struct wmi_gpio_config_cmd {
3055         __le32 gpio_num;             /* GPIO number to be setup */
3056         __le32 input;                /* 0 - Output/ 1 - Input */
3057         __le32 pull_type;            /* Pull type defined above */
3058         __le32 intr_mode;            /* Interrupt mode defined above (Input) */
3059 } __packed;
3060
3061 /* WMI_GPIO_OUTPUT_CMDID */
3062 struct wmi_gpio_output_cmd {
3063         __le32 gpio_num;    /* GPIO number to be setup */
3064         __le32 set;         /* Set the GPIO pin*/
3065 } __packed;
3066
3067 /* WMI_GPIO_INPUT_EVENTID */
3068 struct wmi_gpio_input_event {
3069         __le32 gpio_num;    /* GPIO number which changed state */
3070 } __packed;
3071
3072 struct wmi_ext_resource_config_10_4_cmd {
3073         /* contains enum wmi_host_platform_type */
3074         __le32 host_platform_config;
3075         /* see enum wmi_10_4_feature_mask */
3076         __le32 fw_feature_bitmap;
3077         /* WLAN priority GPIO number */
3078         __le32 wlan_gpio_priority;
3079         /* see enum wmi_coex_version */
3080         __le32 coex_version;
3081         /* COEX GPIO config */
3082         __le32 coex_gpio_pin1;
3083         __le32 coex_gpio_pin2;
3084         __le32 coex_gpio_pin3;
3085         /* number of vdevs allowed to perform tdls */
3086         __le32 num_tdls_vdevs;
3087         /* number of peers to track per TDLS vdev */
3088         __le32 num_tdls_conn_table_entries;
3089         /* number of tdls sleep sta supported */
3090         __le32 max_tdls_concurrent_sleep_sta;
3091         /* number of tdls buffer sta supported */
3092         __le32 max_tdls_concurrent_buffer_sta;
3093 };
3094
3095 /* structure describing host memory chunk. */
3096 struct host_memory_chunk {
3097         /* id of the request that is passed up in service ready */
3098         __le32 req_id;
3099         /* the physical address the memory chunk */
3100         __le32 ptr;
3101         /* size of the chunk */
3102         __le32 size;
3103 } __packed;
3104
3105 #define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3106
3107 struct wmi_host_mem_chunks {
3108         __le32 count;
3109         /* some fw revisions require at least 1 chunk regardless of count */
3110         union {
3111                 struct host_memory_chunk item;
3112                 DECLARE_FLEX_ARRAY(struct host_memory_chunk, items);
3113         };
3114 } __packed;
3115
3116 struct wmi_init_cmd {
3117         struct wmi_resource_config resource_config;
3118         struct wmi_host_mem_chunks mem_chunks;
3119 } __packed;
3120
3121 /* _10x structure is from 10.X FW API */
3122 struct wmi_init_cmd_10x {
3123         struct wmi_resource_config_10x resource_config;
3124         struct wmi_host_mem_chunks mem_chunks;
3125 } __packed;
3126
3127 struct wmi_init_cmd_10_2 {
3128         struct wmi_resource_config_10_2 resource_config;
3129         struct wmi_host_mem_chunks mem_chunks;
3130 } __packed;
3131
3132 struct wmi_init_cmd_10_4 {
3133         struct wmi_resource_config_10_4 resource_config;
3134         struct wmi_host_mem_chunks mem_chunks;
3135 } __packed;
3136
3137 struct wmi_chan_list_entry {
3138         __le16 freq;
3139         u8 phy_mode; /* valid for 10.2 only */
3140         u8 reserved;
3141 } __packed;
3142
3143 /* TLV for channel list */
3144 struct wmi_chan_list {
3145         __le32 tag; /* WMI_CHAN_LIST_TAG */
3146         __le32 num_chan;
3147         struct wmi_chan_list_entry channel_list[];
3148 } __packed;
3149
3150 struct wmi_bssid_list {
3151         __le32 tag; /* WMI_BSSID_LIST_TAG */
3152         __le32 num_bssid;
3153         struct wmi_mac_addr bssid_list[];
3154 } __packed;
3155
3156 struct wmi_ie_data {
3157         __le32 tag; /* WMI_IE_TAG */
3158         __le32 ie_len;
3159         u8 ie_data[];
3160 } __packed;
3161
3162 struct wmi_ssid {
3163         __le32 ssid_len;
3164         u8 ssid[32];
3165 } __packed;
3166
3167 struct wmi_ssid_list {
3168         __le32 tag; /* WMI_SSID_LIST_TAG */
3169         __le32 num_ssids;
3170         struct wmi_ssid ssids[];
3171 } __packed;
3172
3173 /* prefix used by scan requestor ids on the host */
3174 #define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3175
3176 /* prefix used by scan request ids generated on the host */
3177 /* host cycles through the lower 12 bits to generate ids */
3178 #define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3179
3180 #define WLAN_SCAN_PARAMS_MAX_SSID    16
3181 #define WLAN_SCAN_PARAMS_MAX_BSSID   4
3182 #define WLAN_SCAN_PARAMS_MAX_IE_LEN  256
3183
3184 /* Values lower than this may be refused by some firmware revisions with a scan
3185  * completion with a timedout reason.
3186  */
3187 #define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3188
3189 /* Scan priority numbers must be sequential, starting with 0 */
3190 enum wmi_scan_priority {
3191         WMI_SCAN_PRIORITY_VERY_LOW = 0,
3192         WMI_SCAN_PRIORITY_LOW,
3193         WMI_SCAN_PRIORITY_MEDIUM,
3194         WMI_SCAN_PRIORITY_HIGH,
3195         WMI_SCAN_PRIORITY_VERY_HIGH,
3196         WMI_SCAN_PRIORITY_COUNT   /* number of priorities supported */
3197 };
3198
3199 struct wmi_start_scan_common {
3200         /* Scan ID */
3201         __le32 scan_id;
3202         /* Scan requestor ID */
3203         __le32 scan_req_id;
3204         /* VDEV id(interface) that is requesting scan */
3205         __le32 vdev_id;
3206         /* Scan Priority, input to scan scheduler */
3207         __le32 scan_priority;
3208         /* Scan events subscription */
3209         __le32 notify_scan_events;
3210         /* dwell time in msec on active channels */
3211         __le32 dwell_time_active;
3212         /* dwell time in msec on passive channels */
3213         __le32 dwell_time_passive;
3214         /*
3215          * min time in msec on the BSS channel,only valid if at least one
3216          * VDEV is active
3217          */
3218         __le32 min_rest_time;
3219         /*
3220          * max rest time in msec on the BSS channel,only valid if at least
3221          * one VDEV is active
3222          */
3223         /*
3224          * the scanner will rest on the bss channel at least min_rest_time
3225          * after min_rest_time the scanner will start checking for tx/rx
3226          * activity on all VDEVs. if there is no activity the scanner will
3227          * switch to off channel. if there is activity the scanner will let
3228          * the radio on the bss channel until max_rest_time expires.at
3229          * max_rest_time scanner will switch to off channel irrespective of
3230          * activity. activity is determined by the idle_time parameter.
3231          */
3232         __le32 max_rest_time;
3233         /*
3234          * time before sending next set of probe requests.
3235          * The scanner keeps repeating probe requests transmission with
3236          * period specified by repeat_probe_time.
3237          * The number of probe requests specified depends on the ssid_list
3238          * and bssid_list
3239          */
3240         __le32 repeat_probe_time;
3241         /* time in msec between 2 consecutive probe requests with in a set. */
3242         __le32 probe_spacing_time;
3243         /*
3244          * data inactivity time in msec on bss channel that will be used by
3245          * scanner for measuring the inactivity.
3246          */
3247         __le32 idle_time;
3248         /* maximum time in msec allowed for scan  */
3249         __le32 max_scan_time;
3250         /*
3251          * delay in msec before sending first probe request after switching
3252          * to a channel
3253          */
3254         __le32 probe_delay;
3255         /* Scan control flags */
3256         __le32 scan_ctrl_flags;
3257 } __packed;
3258
3259 struct wmi_start_scan_cmd {
3260         struct wmi_start_scan_common common;
3261         __le32 burst_duration_ms;
3262         u8 tlvs[];
3263 } __packed;
3264
3265 /* This is the definition from 10.X firmware branch */
3266 struct wmi_10x_start_scan_cmd {
3267         struct wmi_start_scan_common common;
3268         u8 tlvs[];
3269 } __packed;
3270
3271 struct wmi_ssid_arg {
3272         int len;
3273         const u8 *ssid;
3274 };
3275
3276 struct wmi_bssid_arg {
3277         const u8 *bssid;
3278 };
3279
3280 struct wmi_start_scan_arg {
3281         u32 scan_id;
3282         u32 scan_req_id;
3283         u32 vdev_id;
3284         u32 scan_priority;
3285         u32 notify_scan_events;
3286         u32 dwell_time_active;
3287         u32 dwell_time_passive;
3288         u32 min_rest_time;
3289         u32 max_rest_time;
3290         u32 repeat_probe_time;
3291         u32 probe_spacing_time;
3292         u32 idle_time;
3293         u32 max_scan_time;
3294         u32 probe_delay;
3295         u32 scan_ctrl_flags;
3296         u32 burst_duration_ms;
3297
3298         u32 ie_len;
3299         u32 n_channels;
3300         u32 n_ssids;
3301         u32 n_bssids;
3302
3303         u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3304         u16 channels[64];
3305         struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3306         struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3307         struct wmi_mac_addr mac_addr;
3308         struct wmi_mac_addr mac_mask;
3309 };
3310
3311 /* scan control flags */
3312
3313 /* passively scan all channels including active channels */
3314 #define WMI_SCAN_FLAG_PASSIVE        0x1
3315 /* add wild card ssid probe request even though ssid_list is specified. */
3316 #define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3317 /* add cck rates to rates/xrate ie for the generated probe request */
3318 #define WMI_SCAN_ADD_CCK_RATES 0x4
3319 /* add ofdm rates to rates/xrate ie for the generated probe request */
3320 #define WMI_SCAN_ADD_OFDM_RATES 0x8
3321 /* To enable indication of Chan load and Noise floor to host */
3322 #define WMI_SCAN_CHAN_STAT_EVENT 0x10
3323 /* Filter Probe request frames  */
3324 #define WMI_SCAN_FILTER_PROBE_REQ 0x20
3325 /* When set, DFS channels will not be scanned */
3326 #define WMI_SCAN_BYPASS_DFS_CHN 0x40
3327 /* Different FW scan engine may choose to bail out on errors.
3328  * Allow the driver to have influence over that.
3329  */
3330 #define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3331
3332 /* Use random MAC address for TA for Probe Request frame and add
3333  * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3334  * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3335  */
3336 #define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ   0x1000
3337
3338 /* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3339 #define WMI_SCAN_CLASS_MASK 0xFF000000
3340
3341 enum wmi_stop_scan_type {
3342         WMI_SCAN_STOP_ONE       = 0x00000000, /* stop by scan_id */
3343         WMI_SCAN_STOP_VDEV_ALL  = 0x01000000, /* stop by vdev_id */
3344         WMI_SCAN_STOP_ALL       = 0x04000000, /* stop all scans */
3345 };
3346
3347 struct wmi_stop_scan_cmd {
3348         __le32 scan_req_id;
3349         __le32 scan_id;
3350         __le32 req_type;
3351         __le32 vdev_id;
3352 } __packed;
3353
3354 struct wmi_stop_scan_arg {
3355         u32 req_id;
3356         enum wmi_stop_scan_type req_type;
3357         union {
3358                 u32 scan_id;
3359                 u32 vdev_id;
3360         } u;
3361 };
3362
3363 struct wmi_scan_chan_list_cmd {
3364         __le32 num_scan_chans;
3365         struct wmi_channel chan_info[];
3366 } __packed;
3367
3368 struct wmi_scan_chan_list_arg {
3369         u32 n_channels;
3370         struct wmi_channel_arg *channels;
3371 };
3372
3373 enum wmi_bss_filter {
3374         WMI_BSS_FILTER_NONE = 0,        /* no beacons forwarded */
3375         WMI_BSS_FILTER_ALL,             /* all beacons forwarded */
3376         WMI_BSS_FILTER_PROFILE,         /* only beacons matching profile */
3377         WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3378         WMI_BSS_FILTER_CURRENT_BSS,     /* only beacons matching current BSS */
3379         WMI_BSS_FILTER_ALL_BUT_BSS,     /* all but beacons matching BSS */
3380         WMI_BSS_FILTER_PROBED_SSID,     /* beacons matching probed ssid */
3381         WMI_BSS_FILTER_LAST_BSS,        /* marker only */
3382 };
3383
3384 enum wmi_scan_event_type {
3385         WMI_SCAN_EVENT_STARTED              = BIT(0),
3386         WMI_SCAN_EVENT_COMPLETED            = BIT(1),
3387         WMI_SCAN_EVENT_BSS_CHANNEL          = BIT(2),
3388         WMI_SCAN_EVENT_FOREIGN_CHANNEL      = BIT(3),
3389         WMI_SCAN_EVENT_DEQUEUED             = BIT(4),
3390         /* possibly by high-prio scan */
3391         WMI_SCAN_EVENT_PREEMPTED            = BIT(5),
3392         WMI_SCAN_EVENT_START_FAILED         = BIT(6),
3393         WMI_SCAN_EVENT_RESTARTED            = BIT(7),
3394         WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3395         WMI_SCAN_EVENT_MAX                  = BIT(15),
3396 };
3397
3398 enum wmi_scan_completion_reason {
3399         WMI_SCAN_REASON_COMPLETED,
3400         WMI_SCAN_REASON_CANCELLED,
3401         WMI_SCAN_REASON_PREEMPTED,
3402         WMI_SCAN_REASON_TIMEDOUT,
3403         WMI_SCAN_REASON_INTERNAL_FAILURE,
3404         WMI_SCAN_REASON_MAX,
3405 };
3406
3407 struct wmi_scan_event {
3408         __le32 event_type; /* %WMI_SCAN_EVENT_ */
3409         __le32 reason; /* %WMI_SCAN_REASON_ */
3410         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3411         __le32 scan_req_id;
3412         __le32 scan_id;
3413         __le32 vdev_id;
3414 } __packed;
3415
3416 /*
3417  * This defines how much headroom is kept in the
3418  * receive frame between the descriptor and the
3419  * payload, in order for the WMI PHY error and
3420  * management handler to insert header contents.
3421  *
3422  * This is in bytes.
3423  */
3424 #define WMI_MGMT_RX_HDR_HEADROOM    52
3425
3426 /*
3427  * This event will be used for sending scan results
3428  * as well as rx mgmt frames to the host. The rx buffer
3429  * will be sent as part of this WMI event. It would be a
3430  * good idea to pass all the fields in the RX status
3431  * descriptor up to the host.
3432  */
3433 struct wmi_mgmt_rx_hdr_v1 {
3434         __le32 channel;
3435         __le32 snr;
3436         __le32 rate;
3437         __le32 phy_mode;
3438         __le32 buf_len;
3439         __le32 status; /* %WMI_RX_STATUS_ */
3440 } __packed;
3441
3442 struct wmi_mgmt_rx_hdr_v2 {
3443         struct wmi_mgmt_rx_hdr_v1 v1;
3444         __le32 rssi_ctl[4];
3445 } __packed;
3446
3447 struct wmi_mgmt_rx_event_v1 {
3448         struct wmi_mgmt_rx_hdr_v1 hdr;
3449         u8 buf[];
3450 } __packed;
3451
3452 struct wmi_mgmt_rx_event_v2 {
3453         struct wmi_mgmt_rx_hdr_v2 hdr;
3454         u8 buf[];
3455 } __packed;
3456
3457 struct wmi_10_4_mgmt_rx_hdr {
3458         __le32 channel;
3459         __le32 snr;
3460             u8 rssi_ctl[4];
3461         __le32 rate;
3462         __le32 phy_mode;
3463         __le32 buf_len;
3464         __le32 status;
3465 } __packed;
3466
3467 struct wmi_10_4_mgmt_rx_event {
3468         struct wmi_10_4_mgmt_rx_hdr hdr;
3469         u8 buf[];
3470 } __packed;
3471
3472 struct wmi_mgmt_rx_ext_info {
3473         __le64 rx_mac_timestamp;
3474 } __packed __aligned(4);
3475
3476 #define WMI_RX_STATUS_OK                        0x00
3477 #define WMI_RX_STATUS_ERR_CRC                   0x01
3478 #define WMI_RX_STATUS_ERR_DECRYPT               0x08
3479 #define WMI_RX_STATUS_ERR_MIC                   0x10
3480 #define WMI_RX_STATUS_ERR_KEY_CACHE_MISS        0x20
3481 /* Extension data at the end of mgmt frame */
3482 #define WMI_RX_STATUS_EXT_INFO          0x40
3483
3484 #define PHY_ERROR_GEN_SPECTRAL_SCAN             0x26
3485 #define PHY_ERROR_GEN_FALSE_RADAR_EXT           0x24
3486 #define PHY_ERROR_GEN_RADAR                     0x05
3487
3488 #define PHY_ERROR_10_4_RADAR_MASK               0x4
3489 #define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK       0x4000000
3490
3491 enum phy_err_type {
3492         PHY_ERROR_UNKNOWN,
3493         PHY_ERROR_SPECTRAL_SCAN,
3494         PHY_ERROR_FALSE_RADAR_EXT,
3495         PHY_ERROR_RADAR
3496 };
3497
3498 struct wmi_phyerr {
3499         __le32 tsf_timestamp;
3500         __le16 freq1;
3501         __le16 freq2;
3502         u8 rssi_combined;
3503         u8 chan_width_mhz;
3504         u8 phy_err_code;
3505         u8 rsvd0;
3506         __le32 rssi_chains[4];
3507         __le16 nf_chains[4];
3508         __le32 buf_len;
3509         u8 buf[];
3510 } __packed;
3511
3512 struct wmi_phyerr_event {
3513         __le32 num_phyerrs;
3514         __le32 tsf_l32;
3515         __le32 tsf_u32;
3516
3517         /* array of struct wmi_phyerr */
3518         u8 phyerrs[];
3519 } __packed;
3520
3521 struct wmi_10_4_phyerr_event {
3522         __le32 tsf_l32;
3523         __le32 tsf_u32;
3524         __le16 freq1;
3525         __le16 freq2;
3526         u8 rssi_combined;
3527         u8 chan_width_mhz;
3528         u8 phy_err_code;
3529         u8 rsvd0;
3530         __le32 rssi_chains[4];
3531         __le16 nf_chains[4];
3532         __le32 phy_err_mask[2];
3533         __le32 tsf_timestamp;
3534         __le32 buf_len;
3535         u8 buf[];
3536 } __packed;
3537
3538 struct wmi_radar_found_info {
3539         __le32 pri_min;
3540         __le32 pri_max;
3541         __le32 width_min;
3542         __le32 width_max;
3543         __le32 sidx_min;
3544         __le32 sidx_max;
3545 } __packed;
3546
3547 enum wmi_radar_confirmation_status {
3548         /* Detected radar was due to SW pulses */
3549         WMI_SW_RADAR_DETECTED    = 0,
3550
3551         WMI_RADAR_DETECTION_FAIL = 1,
3552
3553         /* Real radar detected */
3554         WMI_HW_RADAR_DETECTED    = 2,
3555 };
3556
3557 #define PHYERR_TLV_SIG                          0xBB
3558 #define PHYERR_TLV_TAG_SEARCH_FFT_REPORT        0xFB
3559 #define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY      0xF8
3560 #define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT  0xF9
3561
3562 struct phyerr_radar_report {
3563         __le32 reg0; /* RADAR_REPORT_REG0_* */
3564         __le32 reg1; /* RADAR_REPORT_REG1_* */
3565 } __packed;
3566
3567 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK           0x80000000
3568 #define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB            31
3569
3570 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK       0x40000000
3571 #define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB        30
3572
3573 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK           0x3FF00000
3574 #define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB            20
3575
3576 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK         0x000F0000
3577 #define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB          16
3578
3579 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK         0x0000FC00
3580 #define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB          10
3581
3582 #define RADAR_REPORT_REG0_PULSE_SIDX_MASK               0x000003FF
3583 #define RADAR_REPORT_REG0_PULSE_SIDX_LSB                0
3584
3585 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK     0x80000000
3586 #define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB      31
3587
3588 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK        0x7F000000
3589 #define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB         24
3590
3591 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK       0x00FF0000
3592 #define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB        16
3593
3594 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK         0x0000FF00
3595 #define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB          8
3596
3597 #define RADAR_REPORT_REG1_PULSE_DUR_MASK                0x000000FF
3598 #define RADAR_REPORT_REG1_PULSE_DUR_LSB                 0
3599
3600 struct phyerr_fft_report {
3601         __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3602         __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3603 } __packed;
3604
3605 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK       0xFF800000
3606 #define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB        23
3607
3608 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK         0x007FC000
3609 #define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB          14
3610
3611 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK         0x00003000
3612 #define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB          12
3613
3614 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK           0x00000FFF
3615 #define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB            0
3616
3617 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK           0xFC000000
3618 #define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB            26
3619
3620 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK           0x03FC0000
3621 #define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB            18
3622
3623 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK            0x0003FF00
3624 #define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB             8
3625
3626 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK     0x000000FF
3627 #define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB      0
3628
3629 struct phyerr_tlv {
3630         __le16 len;
3631         u8 tag;
3632         u8 sig;
3633 } __packed;
3634
3635 #define DFS_RSSI_POSSIBLY_FALSE                 50
3636 #define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE       40
3637
3638 struct wmi_mgmt_tx_hdr {
3639         __le32 vdev_id;
3640         struct wmi_mac_addr peer_macaddr;
3641         __le32 tx_rate;
3642         __le32 tx_power;
3643         __le32 buf_len;
3644 } __packed;
3645
3646 struct wmi_mgmt_tx_cmd {
3647         struct wmi_mgmt_tx_hdr hdr;
3648         u8 buf[];
3649 } __packed;
3650
3651 struct wmi_echo_event {
3652         __le32 value;
3653 } __packed;
3654
3655 struct wmi_echo_cmd {
3656         __le32 value;
3657 } __packed;
3658
3659 struct wmi_pdev_set_regdomain_cmd {
3660         __le32 reg_domain;
3661         __le32 reg_domain_2G;
3662         __le32 reg_domain_5G;
3663         __le32 conformance_test_limit_2G;
3664         __le32 conformance_test_limit_5G;
3665 } __packed;
3666
3667 enum wmi_dfs_region {
3668         /* Uninitialized dfs domain */
3669         WMI_UNINIT_DFS_DOMAIN = 0,
3670
3671         /* FCC3 dfs domain */
3672         WMI_FCC_DFS_DOMAIN = 1,
3673
3674         /* ETSI dfs domain */
3675         WMI_ETSI_DFS_DOMAIN = 2,
3676
3677         /*Japan dfs domain */
3678         WMI_MKK4_DFS_DOMAIN = 3,
3679 };
3680
3681 struct wmi_pdev_set_regdomain_cmd_10x {
3682         __le32 reg_domain;
3683         __le32 reg_domain_2G;
3684         __le32 reg_domain_5G;
3685         __le32 conformance_test_limit_2G;
3686         __le32 conformance_test_limit_5G;
3687
3688         /* dfs domain from wmi_dfs_region */
3689         __le32 dfs_domain;
3690 } __packed;
3691
3692 /* Command to set/unset chip in quiet mode */
3693 struct wmi_pdev_set_quiet_cmd {
3694         /* period in TUs */
3695         __le32 period;
3696
3697         /* duration in TUs */
3698         __le32 duration;
3699
3700         /* offset in TUs */
3701         __le32 next_start;
3702
3703         /* enable/disable */
3704         __le32 enabled;
3705 } __packed;
3706
3707 /*
3708  * 802.11g protection mode.
3709  */
3710 enum ath10k_protmode {
3711         ATH10K_PROT_NONE     = 0,    /* no protection */
3712         ATH10K_PROT_CTSONLY  = 1,    /* CTS to self */
3713         ATH10K_PROT_RTSCTS   = 2,    /* RTS-CTS */
3714 };
3715
3716 enum wmi_rtscts_profile {
3717         WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3718         WMI_RTSCTS_FOR_SECOND_RATESERIES,
3719         WMI_RTSCTS_ACROSS_SW_RETRIES
3720 };
3721
3722 #define WMI_RTSCTS_ENABLED              1
3723 #define WMI_RTSCTS_SET_MASK             0x0f
3724 #define WMI_RTSCTS_SET_LSB              0
3725
3726 #define WMI_RTSCTS_PROFILE_MASK         0xf0
3727 #define WMI_RTSCTS_PROFILE_LSB          4
3728
3729 enum wmi_beacon_gen_mode {
3730         WMI_BEACON_STAGGERED_MODE = 0,
3731         WMI_BEACON_BURST_MODE = 1
3732 };
3733
3734 enum wmi_csa_event_ies_present_flag {
3735         WMI_CSA_IE_PRESENT = 0x00000001,
3736         WMI_XCSA_IE_PRESENT = 0x00000002,
3737         WMI_WBW_IE_PRESENT = 0x00000004,
3738         WMI_CSWARP_IE_PRESENT = 0x00000008,
3739 };
3740
3741 /* wmi CSA receive event from beacon frame */
3742 struct wmi_csa_event {
3743         __le32 i_fc_dur;
3744         /* Bit 0-15: FC */
3745         /* Bit 16-31: DUR */
3746         struct wmi_mac_addr i_addr1;
3747         struct wmi_mac_addr i_addr2;
3748         __le32 csa_ie[2];
3749         __le32 xcsa_ie[2];
3750         __le32 wb_ie[2];
3751         __le32 cswarp_ie;
3752         __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3753 } __packed;
3754
3755 /* the definition of different PDEV parameters */
3756 #define PDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3757 #define VDEV_DEFAULT_STATS_UPDATE_PERIOD    500
3758 #define PEER_DEFAULT_STATS_UPDATE_PERIOD    500
3759
3760 struct wmi_pdev_param_map {
3761         u32 tx_chain_mask;
3762         u32 rx_chain_mask;
3763         u32 txpower_limit2g;
3764         u32 txpower_limit5g;
3765         u32 txpower_scale;
3766         u32 beacon_gen_mode;
3767         u32 beacon_tx_mode;
3768         u32 resmgr_offchan_mode;
3769         u32 protection_mode;
3770         u32 dynamic_bw;
3771         u32 non_agg_sw_retry_th;
3772         u32 agg_sw_retry_th;
3773         u32 sta_kickout_th;
3774         u32 ac_aggrsize_scaling;
3775         u32 ltr_enable;
3776         u32 ltr_ac_latency_be;
3777         u32 ltr_ac_latency_bk;
3778         u32 ltr_ac_latency_vi;
3779         u32 ltr_ac_latency_vo;
3780         u32 ltr_ac_latency_timeout;
3781         u32 ltr_sleep_override;
3782         u32 ltr_rx_override;
3783         u32 ltr_tx_activity_timeout;
3784         u32 l1ss_enable;
3785         u32 dsleep_enable;
3786         u32 pcielp_txbuf_flush;
3787         u32 pcielp_txbuf_watermark;
3788         u32 pcielp_txbuf_tmo_en;
3789         u32 pcielp_txbuf_tmo_value;
3790         u32 pdev_stats_update_period;
3791         u32 vdev_stats_update_period;
3792         u32 peer_stats_update_period;
3793         u32 bcnflt_stats_update_period;
3794         u32 pmf_qos;
3795         u32 arp_ac_override;
3796         u32 dcs;
3797         u32 ani_enable;
3798         u32 ani_poll_period;
3799         u32 ani_listen_period;
3800         u32 ani_ofdm_level;
3801         u32 ani_cck_level;
3802         u32 dyntxchain;
3803         u32 proxy_sta;
3804         u32 idle_ps_config;
3805         u32 power_gating_sleep;
3806         u32 fast_channel_reset;
3807         u32 burst_dur;
3808         u32 burst_enable;
3809         u32 cal_period;
3810         u32 aggr_burst;
3811         u32 rx_decap_mode;
3812         u32 smart_antenna_default_antenna;
3813         u32 igmpmld_override;
3814         u32 igmpmld_tid;
3815         u32 antenna_gain;
3816         u32 rx_filter;
3817         u32 set_mcast_to_ucast_tid;
3818         u32 proxy_sta_mode;
3819         u32 set_mcast2ucast_mode;
3820         u32 set_mcast2ucast_buffer;
3821         u32 remove_mcast2ucast_buffer;
3822         u32 peer_sta_ps_statechg_enable;
3823         u32 igmpmld_ac_override;
3824         u32 block_interbss;
3825         u32 set_disable_reset_cmdid;
3826         u32 set_msdu_ttl_cmdid;
3827         u32 set_ppdu_duration_cmdid;
3828         u32 txbf_sound_period_cmdid;
3829         u32 set_promisc_mode_cmdid;
3830         u32 set_burst_mode_cmdid;
3831         u32 en_stats;
3832         u32 mu_group_policy;
3833         u32 noise_detection;
3834         u32 noise_threshold;
3835         u32 dpd_enable;
3836         u32 set_mcast_bcast_echo;
3837         u32 atf_strict_sch;
3838         u32 atf_sched_duration;
3839         u32 ant_plzn;
3840         u32 mgmt_retry_limit;
3841         u32 sensitivity_level;
3842         u32 signed_txpower_2g;
3843         u32 signed_txpower_5g;
3844         u32 enable_per_tid_amsdu;
3845         u32 enable_per_tid_ampdu;
3846         u32 cca_threshold;
3847         u32 rts_fixed_rate;
3848         u32 pdev_reset;
3849         u32 wapi_mbssid_offset;
3850         u32 arp_srcaddr;
3851         u32 arp_dstaddr;
3852         u32 enable_btcoex;
3853         u32 rfkill_config;
3854         u32 rfkill_enable;
3855         u32 peer_stats_info_enable;
3856 };
3857
3858 #define WMI_PDEV_PARAM_UNSUPPORTED 0
3859
3860 enum wmi_pdev_param {
3861         /* TX chain mask */
3862         WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3863         /* RX chain mask */
3864         WMI_PDEV_PARAM_RX_CHAIN_MASK,
3865         /* TX power limit for 2G Radio */
3866         WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3867         /* TX power limit for 5G Radio */
3868         WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3869         /* TX power scale */
3870         WMI_PDEV_PARAM_TXPOWER_SCALE,
3871         /* Beacon generation mode . 0: host, 1: target   */
3872         WMI_PDEV_PARAM_BEACON_GEN_MODE,
3873         /* Beacon generation mode . 0: staggered 1: bursted   */
3874         WMI_PDEV_PARAM_BEACON_TX_MODE,
3875         /*
3876          * Resource manager off chan mode .
3877          * 0: turn off offchan mode. 1: turn on offchan mode
3878          */
3879         WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3880         /*
3881          * Protection mode:
3882          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3883          */
3884         WMI_PDEV_PARAM_PROTECTION_MODE,
3885         /*
3886          * Dynamic bandwidth - 0: disable, 1: enable
3887          *
3888          * When enabled HW rate control tries different bandwidths when
3889          * retransmitting frames.
3890          */
3891         WMI_PDEV_PARAM_DYNAMIC_BW,
3892         /* Non aggregate/ 11g sw retry threshold.0-disable */
3893         WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3894         /* aggregate sw retry threshold. 0-disable*/
3895         WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3896         /* Station kickout threshold (non of consecutive failures).0-disable */
3897         WMI_PDEV_PARAM_STA_KICKOUT_TH,
3898         /* Aggerate size scaling configuration per AC */
3899         WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3900         /* LTR enable */
3901         WMI_PDEV_PARAM_LTR_ENABLE,
3902         /* LTR latency for BE, in us */
3903         WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3904         /* LTR latency for BK, in us */
3905         WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3906         /* LTR latency for VI, in us */
3907         WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3908         /* LTR latency for VO, in us  */
3909         WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3910         /* LTR AC latency timeout, in ms */
3911         WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3912         /* LTR platform latency override, in us */
3913         WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3914         /* LTR-RX override, in us */
3915         WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3916         /* Tx activity timeout for LTR, in us */
3917         WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3918         /* L1SS state machine enable */
3919         WMI_PDEV_PARAM_L1SS_ENABLE,
3920         /* Deep sleep state machine enable */
3921         WMI_PDEV_PARAM_DSLEEP_ENABLE,
3922         /* RX buffering flush enable */
3923         WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3924         /* RX buffering matermark */
3925         WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3926         /* RX buffering timeout enable */
3927         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3928         /* RX buffering timeout value */
3929         WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3930         /* pdev level stats update period in ms */
3931         WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3932         /* vdev level stats update period in ms */
3933         WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3934         /* peer level stats update period in ms */
3935         WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3936         /* beacon filter status update period */
3937         WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3938         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3939         WMI_PDEV_PARAM_PMF_QOS,
3940         /* Access category on which ARP frames are sent */
3941         WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3942         /* DCS configuration */
3943         WMI_PDEV_PARAM_DCS,
3944         /* Enable/Disable ANI on target */
3945         WMI_PDEV_PARAM_ANI_ENABLE,
3946         /* configure the ANI polling period */
3947         WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3948         /* configure the ANI listening period */
3949         WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3950         /* configure OFDM immunity level */
3951         WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3952         /* configure CCK immunity level */
3953         WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3954         /* Enable/Disable CDD for 1x1 STAs in rate control module */
3955         WMI_PDEV_PARAM_DYNTXCHAIN,
3956         /* Enable/Disable proxy STA */
3957         WMI_PDEV_PARAM_PROXY_STA,
3958         /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3959         WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3960         /* Enable/Disable power gating sleep */
3961         WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3962 };
3963
3964 enum wmi_10x_pdev_param {
3965         /* TX chian mask */
3966         WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3967         /* RX chian mask */
3968         WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3969         /* TX power limit for 2G Radio */
3970         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3971         /* TX power limit for 5G Radio */
3972         WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3973         /* TX power scale */
3974         WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3975         /* Beacon generation mode . 0: host, 1: target   */
3976         WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3977         /* Beacon generation mode . 0: staggered 1: bursted   */
3978         WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3979         /*
3980          * Resource manager off chan mode .
3981          * 0: turn off offchan mode. 1: turn on offchan mode
3982          */
3983         WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3984         /*
3985          * Protection mode:
3986          * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3987          */
3988         WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3989         /* Dynamic bandwidth 0: disable 1: enable */
3990         WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3991         /* Non aggregate/ 11g sw retry threshold.0-disable */
3992         WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3993         /* aggregate sw retry threshold. 0-disable*/
3994         WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3995         /* Station kickout threshold (non of consecutive failures).0-disable */
3996         WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3997         /* Aggerate size scaling configuration per AC */
3998         WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3999         /* LTR enable */
4000         WMI_10X_PDEV_PARAM_LTR_ENABLE,
4001         /* LTR latency for BE, in us */
4002         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
4003         /* LTR latency for BK, in us */
4004         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
4005         /* LTR latency for VI, in us */
4006         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
4007         /* LTR latency for VO, in us  */
4008         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
4009         /* LTR AC latency timeout, in ms */
4010         WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4011         /* LTR platform latency override, in us */
4012         WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4013         /* LTR-RX override, in us */
4014         WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
4015         /* Tx activity timeout for LTR, in us */
4016         WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4017         /* L1SS state machine enable */
4018         WMI_10X_PDEV_PARAM_L1SS_ENABLE,
4019         /* Deep sleep state machine enable */
4020         WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
4021         /* pdev level stats update period in ms */
4022         WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4023         /* vdev level stats update period in ms */
4024         WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4025         /* peer level stats update period in ms */
4026         WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4027         /* beacon filter status update period */
4028         WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4029         /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
4030         WMI_10X_PDEV_PARAM_PMF_QOS,
4031         /* Access category on which ARP and DHCP frames are sent */
4032         WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
4033         /* DCS configuration */
4034         WMI_10X_PDEV_PARAM_DCS,
4035         /* Enable/Disable ANI on target */
4036         WMI_10X_PDEV_PARAM_ANI_ENABLE,
4037         /* configure the ANI polling period */
4038         WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
4039         /* configure the ANI listening period */
4040         WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4041         /* configure OFDM immunity level */
4042         WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4043         /* configure CCK immunity level */
4044         WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4045         /* Enable/Disable CDD for 1x1 STAs in rate control module */
4046         WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4047         /* Enable/Disable Fast channel reset*/
4048         WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4049         /* Set Bursting DUR */
4050         WMI_10X_PDEV_PARAM_BURST_DUR,
4051         /* Set Bursting Enable*/
4052         WMI_10X_PDEV_PARAM_BURST_ENABLE,
4053
4054         /* following are available as of firmware 10.2 */
4055         WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4056         WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4057         WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4058         WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4059         WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4060         WMI_10X_PDEV_PARAM_RX_FILTER,
4061         WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4062         WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4063         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4064         WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4065         WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4066         WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4067         WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4068         WMI_10X_PDEV_PARAM_CAL_PERIOD,
4069         WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4070         WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4071         WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4072         WMI_10X_PDEV_PARAM_PDEV_RESET
4073 };
4074
4075 enum wmi_10_4_pdev_param {
4076         WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4077         WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4078         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4079         WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4080         WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4081         WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4082         WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4083         WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4084         WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4085         WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4086         WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4087         WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4088         WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4089         WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4090         WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4091         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4092         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4093         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4094         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4095         WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4096         WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4097         WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4098         WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4099         WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4100         WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4101         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4102         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4103         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4104         WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4105         WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4106         WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4107         WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4108         WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4109         WMI_10_4_PDEV_PARAM_PMF_QOS,
4110         WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4111         WMI_10_4_PDEV_PARAM_DCS,
4112         WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4113         WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4114         WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4115         WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4116         WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4117         WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4118         WMI_10_4_PDEV_PARAM_PROXY_STA,
4119         WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4120         WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4121         WMI_10_4_PDEV_PARAM_AGGR_BURST,
4122         WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4123         WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4124         WMI_10_4_PDEV_PARAM_BURST_DUR,
4125         WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4126         WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4127         WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4128         WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4129         WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4130         WMI_10_4_PDEV_PARAM_RX_FILTER,
4131         WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4132         WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4133         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4134         WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4135         WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4136         WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4137         WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4138         WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4139         WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4140         WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4141         WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4142         WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4143         WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4144         WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4145         WMI_10_4_PDEV_PARAM_EN_STATS,
4146         WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4147         WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4148         WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4149         WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4150         WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4151         WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4152         WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4153         WMI_10_4_PDEV_PARAM_ANT_PLZN,
4154         WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4155         WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4156         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4157         WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4158         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4159         WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4160         WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4161         WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4162         WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4163         WMI_10_4_PDEV_PARAM_PDEV_RESET,
4164         WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4165         WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4166         WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4167         WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4168         WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4169         WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4170         WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4171         WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4172         WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4173         WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4174         WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4175         WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4176 };
4177
4178 struct wmi_pdev_set_param_cmd {
4179         __le32 param_id;
4180         __le32 param_value;
4181 } __packed;
4182
4183 struct wmi_pdev_set_base_macaddr_cmd {
4184         struct wmi_mac_addr mac_addr;
4185 } __packed;
4186
4187 /* valid period is 1 ~ 60000ms, unit in millisecond */
4188 #define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4189
4190 struct wmi_pdev_get_tpc_config_cmd {
4191         /* parameter   */
4192         __le32 param;
4193 } __packed;
4194
4195 #define WMI_TPC_CONFIG_PARAM            1
4196 #define WMI_TPC_FINAL_RATE_MAX          240
4197 #define WMI_TPC_TX_N_CHAIN              4
4198 #define WMI_TPC_RATE_MAX               (WMI_TPC_TX_N_CHAIN * 65)
4199 #define WMI_TPC_PREAM_TABLE_MAX         10
4200 #define WMI_TPC_FLAG                    3
4201 #define WMI_TPC_BUF_SIZE                10
4202 #define WMI_TPC_BEAMFORMING             2
4203
4204 enum wmi_tpc_table_type {
4205         WMI_TPC_TABLE_TYPE_CDD = 0,
4206         WMI_TPC_TABLE_TYPE_STBC = 1,
4207         WMI_TPC_TABLE_TYPE_TXBF = 2,
4208 };
4209
4210 enum wmi_tpc_config_event_flag {
4211         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD     = 0x1,
4212         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC    = 0x2,
4213         WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF    = 0x4,
4214 };
4215
4216 struct wmi_pdev_tpc_config_event {
4217         __le32 reg_domain;
4218         __le32 chan_freq;
4219         __le32 phy_mode;
4220         __le32 twice_antenna_reduction;
4221         __le32 twice_max_rd_power;
4222         a_sle32 twice_antenna_gain;
4223         __le32 power_limit;
4224         __le32 rate_max;
4225         __le32 num_tx_chain;
4226         __le32 ctl;
4227         __le32 flags;
4228         s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4229         s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4230         s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4231         s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4232         u8 rates_array[WMI_TPC_RATE_MAX];
4233 } __packed;
4234
4235 /* Transmit power scale factor. */
4236 enum wmi_tp_scale {
4237         WMI_TP_SCALE_MAX    = 0,        /* no scaling (default) */
4238         WMI_TP_SCALE_50     = 1,        /* 50% of max (-3 dBm) */
4239         WMI_TP_SCALE_25     = 2,        /* 25% of max (-6 dBm) */
4240         WMI_TP_SCALE_12     = 3,        /* 12% of max (-9 dBm) */
4241         WMI_TP_SCALE_MIN    = 4,        /* min, but still on   */
4242         WMI_TP_SCALE_SIZE   = 5,        /* max num of enum     */
4243 };
4244
4245 struct wmi_pdev_tpc_final_table_event {
4246         __le32 reg_domain;
4247         __le32 chan_freq;
4248         __le32 phy_mode;
4249         __le32 twice_antenna_reduction;
4250         __le32 twice_max_rd_power;
4251         a_sle32 twice_antenna_gain;
4252         __le32 power_limit;
4253         __le32 rate_max;
4254         __le32 num_tx_chain;
4255         __le32 ctl;
4256         __le32 flags;
4257         s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4258         s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4259         s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4260         s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4261         u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4262         u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4263            [WMI_TPC_TX_N_CHAIN];
4264 } __packed;
4265
4266 struct wmi_pdev_get_tpc_table_cmd {
4267         __le32 param;
4268 } __packed;
4269
4270 enum wmi_tpc_pream_2ghz {
4271         WMI_TPC_PREAM_2GHZ_CCK = 0,
4272         WMI_TPC_PREAM_2GHZ_OFDM,
4273         WMI_TPC_PREAM_2GHZ_HT20,
4274         WMI_TPC_PREAM_2GHZ_HT40,
4275         WMI_TPC_PREAM_2GHZ_VHT20,
4276         WMI_TPC_PREAM_2GHZ_VHT40,
4277         WMI_TPC_PREAM_2GHZ_VHT80,
4278 };
4279
4280 enum wmi_tpc_pream_5ghz {
4281         WMI_TPC_PREAM_5GHZ_OFDM = 1,
4282         WMI_TPC_PREAM_5GHZ_HT20,
4283         WMI_TPC_PREAM_5GHZ_HT40,
4284         WMI_TPC_PREAM_5GHZ_VHT20,
4285         WMI_TPC_PREAM_5GHZ_VHT40,
4286         WMI_TPC_PREAM_5GHZ_VHT80,
4287         WMI_TPC_PREAM_5GHZ_HTCUP,
4288 };
4289
4290 #define WMI_PEER_PS_STATE_DISABLED      2
4291
4292 struct wmi_peer_sta_ps_state_chg_event {
4293         struct wmi_mac_addr peer_macaddr;
4294         __le32 peer_ps_state;
4295 } __packed;
4296
4297 #define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4298
4299 struct wmi_debug_mesg_event {
4300         /* message buffer, NULL terminated */
4301         char bufp[WMI_MAX_DEBUG_MESG];
4302 } __packed;
4303
4304 enum {
4305         /* P2P device */
4306         VDEV_SUBTYPE_P2PDEV = 0,
4307         /* P2P client */
4308         VDEV_SUBTYPE_P2PCLI,
4309         /* P2P GO */
4310         VDEV_SUBTYPE_P2PGO,
4311         /* BT3.0 HS */
4312         VDEV_SUBTYPE_BT,
4313 };
4314
4315 struct wmi_pdev_set_channel_cmd {
4316         /* idnore power , only use flags , mode and freq */
4317         struct wmi_channel chan;
4318 } __packed;
4319
4320 struct wmi_pdev_pktlog_enable_cmd {
4321         __le32 ev_bitmap;
4322 } __packed;
4323
4324 /* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4325 #define WMI_DSCP_MAP_MAX    (64)
4326 struct wmi_pdev_set_dscp_tid_map_cmd {
4327         /* map indicating DSCP to TID conversion */
4328         __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4329 } __packed;
4330
4331 enum mcast_bcast_rate_id {
4332         WMI_SET_MCAST_RATE,
4333         WMI_SET_BCAST_RATE
4334 };
4335
4336 struct mcast_bcast_rate {
4337         enum mcast_bcast_rate_id rate_id;
4338         __le32 rate;
4339 } __packed;
4340
4341 struct wmi_wmm_params {
4342         __le32 cwmin;
4343         __le32 cwmax;
4344         __le32 aifs;
4345         __le32 txop;
4346         __le32 acm;
4347         __le32 no_ack;
4348 } __packed;
4349
4350 struct wmi_pdev_set_wmm_params {
4351         struct wmi_wmm_params ac_be;
4352         struct wmi_wmm_params ac_bk;
4353         struct wmi_wmm_params ac_vi;
4354         struct wmi_wmm_params ac_vo;
4355 } __packed;
4356
4357 struct wmi_wmm_params_arg {
4358         u32 cwmin;
4359         u32 cwmax;
4360         u32 aifs;
4361         u32 txop;
4362         u32 acm;
4363         u32 no_ack;
4364 };
4365
4366 struct wmi_wmm_params_all_arg {
4367         struct wmi_wmm_params_arg ac_be;
4368         struct wmi_wmm_params_arg ac_bk;
4369         struct wmi_wmm_params_arg ac_vi;
4370         struct wmi_wmm_params_arg ac_vo;
4371 };
4372
4373 struct wmi_pdev_stats_tx {
4374         /* Num HTT cookies queued to dispatch list */
4375         __le32 comp_queued;
4376
4377         /* Num HTT cookies dispatched */
4378         __le32 comp_delivered;
4379
4380         /* Num MSDU queued to WAL */
4381         __le32 msdu_enqued;
4382
4383         /* Num MPDU queue to WAL */
4384         __le32 mpdu_enqued;
4385
4386         /* Num MSDUs dropped by WMM limit */
4387         __le32 wmm_drop;
4388
4389         /* Num Local frames queued */
4390         __le32 local_enqued;
4391
4392         /* Num Local frames done */
4393         __le32 local_freed;
4394
4395         /* Num queued to HW */
4396         __le32 hw_queued;
4397
4398         /* Num PPDU reaped from HW */
4399         __le32 hw_reaped;
4400
4401         /* Num underruns */
4402         __le32 underrun;
4403
4404         /* Num PPDUs cleaned up in TX abort */
4405         __le32 tx_abort;
4406
4407         /* Num MPDUs requeued by SW */
4408         __le32 mpdus_requeued;
4409
4410         /* excessive retries */
4411         __le32 tx_ko;
4412
4413         /* data hw rate code */
4414         __le32 data_rc;
4415
4416         /* Scheduler self triggers */
4417         __le32 self_triggers;
4418
4419         /* frames dropped due to excessive sw retries */
4420         __le32 sw_retry_failure;
4421
4422         /* illegal rate phy errors  */
4423         __le32 illgl_rate_phy_err;
4424
4425         /* wal pdev continuous xretry */
4426         __le32 pdev_cont_xretry;
4427
4428         /* wal pdev continuous xretry */
4429         __le32 pdev_tx_timeout;
4430
4431         /* wal pdev resets  */
4432         __le32 pdev_resets;
4433
4434         /* frames dropped due to non-availability of stateless TIDs */
4435         __le32 stateless_tid_alloc_failure;
4436
4437         __le32 phy_underrun;
4438
4439         /* MPDU is more than txop limit */
4440         __le32 txop_ovf;
4441 } __packed;
4442
4443 struct wmi_10_4_pdev_stats_tx {
4444         /* Num HTT cookies queued to dispatch list */
4445         __le32 comp_queued;
4446
4447         /* Num HTT cookies dispatched */
4448         __le32 comp_delivered;
4449
4450         /* Num MSDU queued to WAL */
4451         __le32 msdu_enqued;
4452
4453         /* Num MPDU queue to WAL */
4454         __le32 mpdu_enqued;
4455
4456         /* Num MSDUs dropped by WMM limit */
4457         __le32 wmm_drop;
4458
4459         /* Num Local frames queued */
4460         __le32 local_enqued;
4461
4462         /* Num Local frames done */
4463         __le32 local_freed;
4464
4465         /* Num queued to HW */
4466         __le32 hw_queued;
4467
4468         /* Num PPDU reaped from HW */
4469         __le32 hw_reaped;
4470
4471         /* Num underruns */
4472         __le32 underrun;
4473
4474         /* HW Paused. */
4475         __le32  hw_paused;
4476
4477         /* Num PPDUs cleaned up in TX abort */
4478         __le32 tx_abort;
4479
4480         /* Num MPDUs requeued by SW */
4481         __le32 mpdus_requeued;
4482
4483         /* excessive retries */
4484         __le32 tx_ko;
4485
4486         /* data hw rate code */
4487         __le32 data_rc;
4488
4489         /* Scheduler self triggers */
4490         __le32 self_triggers;
4491
4492         /* frames dropped due to excessive sw retries */
4493         __le32 sw_retry_failure;
4494
4495         /* illegal rate phy errors  */
4496         __le32 illgl_rate_phy_err;
4497
4498         /* wal pdev continuous xretry */
4499         __le32 pdev_cont_xretry;
4500
4501         /* wal pdev tx timeouts */
4502         __le32 pdev_tx_timeout;
4503
4504         /* wal pdev resets  */
4505         __le32 pdev_resets;
4506
4507         /* frames dropped due to non-availability of stateless TIDs */
4508         __le32 stateless_tid_alloc_failure;
4509
4510         __le32 phy_underrun;
4511
4512         /* MPDU is more than txop limit */
4513         __le32 txop_ovf;
4514
4515         /* Number of Sequences posted */
4516         __le32 seq_posted;
4517
4518         /* Number of Sequences failed queueing */
4519         __le32 seq_failed_queueing;
4520
4521         /* Number of Sequences completed */
4522         __le32 seq_completed;
4523
4524         /* Number of Sequences restarted */
4525         __le32 seq_restarted;
4526
4527         /* Number of MU Sequences posted */
4528         __le32 mu_seq_posted;
4529
4530         /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4531         __le32 mpdus_sw_flush;
4532
4533         /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4534         __le32 mpdus_hw_filter;
4535
4536         /* Num MPDUs truncated by PDG
4537          * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4538          */
4539         __le32 mpdus_truncated;
4540
4541         /* Num MPDUs that was tried but didn't receive ACK or BA */
4542         __le32 mpdus_ack_failed;
4543
4544         /* Num MPDUs that was dropped due to expiry. */
4545         __le32 mpdus_expired;
4546 } __packed;
4547
4548 struct wmi_pdev_stats_rx {
4549         /* Cnts any change in ring routing mid-ppdu */
4550         __le32 mid_ppdu_route_change;
4551
4552         /* Total number of statuses processed */
4553         __le32 status_rcvd;
4554
4555         /* Extra frags on rings 0-3 */
4556         __le32 r0_frags;
4557         __le32 r1_frags;
4558         __le32 r2_frags;
4559         __le32 r3_frags;
4560
4561         /* MSDUs / MPDUs delivered to HTT */
4562         __le32 htt_msdus;
4563         __le32 htt_mpdus;
4564
4565         /* MSDUs / MPDUs delivered to local stack */
4566         __le32 loc_msdus;
4567         __le32 loc_mpdus;
4568
4569         /* AMSDUs that have more MSDUs than the status ring size */
4570         __le32 oversize_amsdu;
4571
4572         /* Number of PHY errors */
4573         __le32 phy_errs;
4574
4575         /* Number of PHY errors drops */
4576         __le32 phy_err_drop;
4577
4578         /* Number of mpdu errors - FCS, MIC, ENC etc. */
4579         __le32 mpdu_errs;
4580 } __packed;
4581
4582 struct wmi_pdev_stats_peer {
4583         /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4584         __le32 dummy;
4585 } __packed;
4586
4587 enum wmi_stats_id {
4588         WMI_STAT_PEER = BIT(0),
4589         WMI_STAT_AP = BIT(1),
4590         WMI_STAT_PDEV = BIT(2),
4591         WMI_STAT_VDEV = BIT(3),
4592         WMI_STAT_BCNFLT = BIT(4),
4593         WMI_STAT_VDEV_RATE = BIT(5),
4594 };
4595
4596 enum wmi_10_4_stats_id {
4597         WMI_10_4_STAT_PEER              = BIT(0),
4598         WMI_10_4_STAT_AP                = BIT(1),
4599         WMI_10_4_STAT_INST              = BIT(2),
4600         WMI_10_4_STAT_PEER_EXTD         = BIT(3),
4601         WMI_10_4_STAT_VDEV_EXTD         = BIT(4),
4602 };
4603
4604 enum wmi_tlv_stats_id {
4605         WMI_TLV_STAT_PEER       = BIT(0),
4606         WMI_TLV_STAT_AP         = BIT(1),
4607         WMI_TLV_STAT_PDEV       = BIT(2),
4608         WMI_TLV_STAT_VDEV       = BIT(3),
4609         WMI_TLV_STAT_PEER_EXTD  = BIT(10),
4610 };
4611
4612 struct wlan_inst_rssi_args {
4613         __le16 cfg_retry_count;
4614         __le16 retry_count;
4615 };
4616
4617 struct wmi_request_stats_cmd {
4618         __le32 stats_id;
4619
4620         __le32 vdev_id;
4621
4622         /* peer MAC address */
4623         struct wmi_mac_addr peer_macaddr;
4624
4625         /* Instantaneous RSSI arguments */
4626         struct wlan_inst_rssi_args inst_rssi_args;
4627 } __packed;
4628
4629 enum wmi_peer_stats_info_request_type {
4630         /* request stats of one specified peer */
4631         WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4632         /* request stats of all peers belong to specified VDEV */
4633         WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4634 };
4635
4636 /* Suspend option */
4637 enum {
4638         /* suspend */
4639         WMI_PDEV_SUSPEND,
4640
4641         /* suspend and disable all interrupts */
4642         WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4643 };
4644
4645 struct wmi_pdev_suspend_cmd {
4646         /* suspend option sent to target */
4647         __le32 suspend_opt;
4648 } __packed;
4649
4650 struct wmi_stats_event {
4651         __le32 stats_id; /* WMI_STAT_ */
4652         /*
4653          * number of pdev stats event structures
4654          * (wmi_pdev_stats) 0 or 1
4655          */
4656         __le32 num_pdev_stats;
4657         /*
4658          * number of vdev stats event structures
4659          * (wmi_vdev_stats) 0 or max vdevs
4660          */
4661         __le32 num_vdev_stats;
4662         /*
4663          * number of peer stats event structures
4664          * (wmi_peer_stats) 0 or max peers
4665          */
4666         __le32 num_peer_stats;
4667         __le32 num_bcnflt_stats;
4668         /*
4669          * followed by
4670          *   num_pdev_stats * size of(struct wmi_pdev_stats)
4671          *   num_vdev_stats * size of(struct wmi_vdev_stats)
4672          *   num_peer_stats * size of(struct wmi_peer_stats)
4673          *
4674          *  By having a zero sized array, the pointer to data area
4675          *  becomes available without increasing the struct size
4676          */
4677         u8 data[];
4678 } __packed;
4679
4680 struct wmi_10_2_stats_event {
4681         __le32 stats_id; /* %WMI_REQUEST_ */
4682         __le32 num_pdev_stats;
4683         __le32 num_pdev_ext_stats;
4684         __le32 num_vdev_stats;
4685         __le32 num_peer_stats;
4686         __le32 num_bcnflt_stats;
4687         u8 data[];
4688 } __packed;
4689
4690 /*
4691  * PDEV statistics
4692  * TODO: add all PDEV stats here
4693  */
4694 struct wmi_pdev_stats_base {
4695         __le32 chan_nf;
4696         __le32 tx_frame_count; /* Cycles spent transmitting frames */
4697         __le32 rx_frame_count; /* Cycles spent receiving frames */
4698         __le32 rx_clear_count; /* Total channel busy time, evidently */
4699         __le32 cycle_count; /* Total on-channel time */
4700         __le32 phy_err_count;
4701         __le32 chan_tx_pwr;
4702 } __packed;
4703
4704 struct wmi_pdev_stats {
4705         struct wmi_pdev_stats_base base;
4706         struct wmi_pdev_stats_tx tx;
4707         struct wmi_pdev_stats_rx rx;
4708         struct wmi_pdev_stats_peer peer;
4709 } __packed;
4710
4711 struct wmi_pdev_stats_extra {
4712         __le32 ack_rx_bad;
4713         __le32 rts_bad;
4714         __le32 rts_good;
4715         __le32 fcs_bad;
4716         __le32 no_beacons;
4717         __le32 mib_int_count;
4718 } __packed;
4719
4720 struct wmi_10x_pdev_stats {
4721         struct wmi_pdev_stats_base base;
4722         struct wmi_pdev_stats_tx tx;
4723         struct wmi_pdev_stats_rx rx;
4724         struct wmi_pdev_stats_peer peer;
4725         struct wmi_pdev_stats_extra extra;
4726 } __packed;
4727
4728 struct wmi_pdev_stats_mem {
4729         __le32 dram_free;
4730         __le32 iram_free;
4731 } __packed;
4732
4733 struct wmi_10_2_pdev_stats {
4734         struct wmi_pdev_stats_base base;
4735         struct wmi_pdev_stats_tx tx;
4736         __le32 mc_drop;
4737         struct wmi_pdev_stats_rx rx;
4738         __le32 pdev_rx_timeout;
4739         struct wmi_pdev_stats_mem mem;
4740         struct wmi_pdev_stats_peer peer;
4741         struct wmi_pdev_stats_extra extra;
4742 } __packed;
4743
4744 struct wmi_10_4_pdev_stats {
4745         struct wmi_pdev_stats_base base;
4746         struct wmi_10_4_pdev_stats_tx tx;
4747         struct wmi_pdev_stats_rx rx;
4748         __le32 rx_ovfl_errs;
4749         struct wmi_pdev_stats_mem mem;
4750         __le32 sram_free_size;
4751         struct wmi_pdev_stats_extra extra;
4752 } __packed;
4753
4754 /*
4755  * VDEV statistics
4756  */
4757
4758 #define WMI_VDEV_STATS_FTM_COUNT_VALID  BIT(31)
4759 #define WMI_VDEV_STATS_FTM_COUNT_LSB    0
4760 #define WMI_VDEV_STATS_FTM_COUNT_MASK   0x7fffffff
4761
4762 struct wmi_vdev_stats {
4763         __le32 vdev_id;
4764 } __packed;
4765
4766 struct wmi_vdev_stats_extd {
4767         __le32 vdev_id;
4768         __le32 ppdu_aggr_cnt;
4769         __le32 ppdu_noack;
4770         __le32 mpdu_queued;
4771         __le32 ppdu_nonaggr_cnt;
4772         __le32 mpdu_sw_requeued;
4773         __le32 mpdu_suc_retry;
4774         __le32 mpdu_suc_multitry;
4775         __le32 mpdu_fail_retry;
4776         __le32 tx_ftm_suc;
4777         __le32 tx_ftm_suc_retry;
4778         __le32 tx_ftm_fail;
4779         __le32 rx_ftmr_cnt;
4780         __le32 rx_ftmr_dup_cnt;
4781         __le32 rx_iftmr_cnt;
4782         __le32 rx_iftmr_dup_cnt;
4783         __le32 reserved[6];
4784 } __packed;
4785
4786 /*
4787  * peer statistics.
4788  * TODO: add more stats
4789  */
4790 struct wmi_peer_stats {
4791         struct wmi_mac_addr peer_macaddr;
4792         __le32 peer_rssi;
4793         __le32 peer_tx_rate;
4794 } __packed;
4795
4796 struct wmi_10x_peer_stats {
4797         struct wmi_peer_stats old;
4798         __le32 peer_rx_rate;
4799 } __packed;
4800
4801 struct wmi_10_2_peer_stats {
4802         struct wmi_peer_stats old;
4803         __le32 peer_rx_rate;
4804         __le32 current_per;
4805         __le32 retries;
4806         __le32 tx_rate_count;
4807         __le32 max_4ms_frame_len;
4808         __le32 total_sub_frames;
4809         __le32 tx_bytes;
4810         __le32 num_pkt_loss_overflow[4];
4811         __le32 num_pkt_loss_excess_retry[4];
4812 } __packed;
4813
4814 struct wmi_10_2_4_peer_stats {
4815         struct wmi_10_2_peer_stats common;
4816         __le32 peer_rssi_changed;
4817 } __packed;
4818
4819 struct wmi_10_2_4_ext_peer_stats {
4820         struct wmi_10_2_peer_stats common;
4821         __le32 peer_rssi_changed;
4822         __le32 rx_duration;
4823 } __packed;
4824
4825 struct wmi_10_4_peer_stats {
4826         struct wmi_mac_addr peer_macaddr;
4827         __le32 peer_rssi;
4828         __le32 peer_rssi_seq_num;
4829         __le32 peer_tx_rate;
4830         __le32 peer_rx_rate;
4831         __le32 current_per;
4832         __le32 retries;
4833         __le32 tx_rate_count;
4834         __le32 max_4ms_frame_len;
4835         __le32 total_sub_frames;
4836         __le32 tx_bytes;
4837         __le32 num_pkt_loss_overflow[4];
4838         __le32 num_pkt_loss_excess_retry[4];
4839         __le32 peer_rssi_changed;
4840 } __packed;
4841
4842 struct wmi_10_4_peer_extd_stats {
4843         struct wmi_mac_addr peer_macaddr;
4844         __le32 inactive_time;
4845         __le32 peer_chain_rssi;
4846         __le32 rx_duration;
4847         __le32 reserved[10];
4848 } __packed;
4849
4850 struct wmi_10_4_bss_bcn_stats {
4851         __le32 vdev_id;
4852         __le32 bss_bcns_dropped;
4853         __le32 bss_bcn_delivered;
4854 } __packed;
4855
4856 struct wmi_10_4_bss_bcn_filter_stats {
4857         __le32 bcns_dropped;
4858         __le32 bcns_delivered;
4859         __le32 active_filters;
4860         struct wmi_10_4_bss_bcn_stats bss_stats;
4861 } __packed;
4862
4863 struct wmi_10_2_pdev_ext_stats {
4864         __le32 rx_rssi_comb;
4865         __le32 rx_rssi[4];
4866         __le32 rx_mcs[10];
4867         __le32 tx_mcs[10];
4868         __le32 ack_rssi;
4869 } __packed;
4870
4871 struct wmi_vdev_create_cmd {
4872         __le32 vdev_id;
4873         __le32 vdev_type;
4874         __le32 vdev_subtype;
4875         struct wmi_mac_addr vdev_macaddr;
4876 } __packed;
4877
4878 enum wmi_vdev_type {
4879         WMI_VDEV_TYPE_AP      = 1,
4880         WMI_VDEV_TYPE_STA     = 2,
4881         WMI_VDEV_TYPE_IBSS    = 3,
4882         WMI_VDEV_TYPE_MONITOR = 4,
4883 };
4884
4885 enum wmi_vdev_subtype {
4886         WMI_VDEV_SUBTYPE_NONE,
4887         WMI_VDEV_SUBTYPE_P2P_DEVICE,
4888         WMI_VDEV_SUBTYPE_P2P_CLIENT,
4889         WMI_VDEV_SUBTYPE_P2P_GO,
4890         WMI_VDEV_SUBTYPE_PROXY_STA,
4891         WMI_VDEV_SUBTYPE_MESH_11S,
4892         WMI_VDEV_SUBTYPE_MESH_NON_11S,
4893 };
4894
4895 enum wmi_vdev_subtype_legacy {
4896         WMI_VDEV_SUBTYPE_LEGACY_NONE      = 0,
4897         WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV   = 1,
4898         WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI   = 2,
4899         WMI_VDEV_SUBTYPE_LEGACY_P2P_GO    = 3,
4900         WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4901 };
4902
4903 enum wmi_vdev_subtype_10_2_4 {
4904         WMI_VDEV_SUBTYPE_10_2_4_NONE      = 0,
4905         WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV   = 1,
4906         WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI   = 2,
4907         WMI_VDEV_SUBTYPE_10_2_4_P2P_GO    = 3,
4908         WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4909         WMI_VDEV_SUBTYPE_10_2_4_MESH_11S  = 5,
4910 };
4911
4912 enum wmi_vdev_subtype_10_4 {
4913         WMI_VDEV_SUBTYPE_10_4_NONE         = 0,
4914         WMI_VDEV_SUBTYPE_10_4_P2P_DEV      = 1,
4915         WMI_VDEV_SUBTYPE_10_4_P2P_CLI      = 2,
4916         WMI_VDEV_SUBTYPE_10_4_P2P_GO       = 3,
4917         WMI_VDEV_SUBTYPE_10_4_PROXY_STA    = 4,
4918         WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4919         WMI_VDEV_SUBTYPE_10_4_MESH_11S     = 6,
4920 };
4921
4922 /* values for vdev_subtype */
4923
4924 /* values for vdev_start_request flags */
4925 /*
4926  * Indicates that AP VDEV uses hidden ssid. only valid for
4927  *  AP/GO
4928  */
4929 #define WMI_VDEV_START_HIDDEN_SSID  (1 << 0)
4930 /*
4931  * Indicates if robust management frame/management frame
4932  *  protection is enabled. For GO/AP vdevs, it indicates that
4933  *  it may support station/client associations with RMF enabled.
4934  *  For STA/client vdevs, it indicates that sta will
4935  *  associate with AP with RMF enabled.
4936  */
4937 #define WMI_VDEV_START_PMF_ENABLED  (1 << 1)
4938
4939 struct wmi_p2p_noa_descriptor {
4940         __le32 type_count; /* 255: continuous schedule, 0: reserved */
4941         __le32 duration;  /* Absent period duration in micro seconds */
4942         __le32 interval;   /* Absent period interval in micro seconds */
4943         __le32 start_time; /* 32 bit tsf time when in starts */
4944 } __packed;
4945
4946 struct wmi_vdev_start_request_cmd {
4947         /* WMI channel */
4948         struct wmi_channel chan;
4949         /* unique id identifying the VDEV, generated by the caller */
4950         __le32 vdev_id;
4951         /* requestor id identifying the caller module */
4952         __le32 requestor_id;
4953         /* beacon interval from received beacon */
4954         __le32 beacon_interval;
4955         /* DTIM Period from the received beacon */
4956         __le32 dtim_period;
4957         /* Flags */
4958         __le32 flags;
4959         /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4960         struct wmi_ssid ssid;
4961         /* beacon/probe response xmit rate. Applicable for SoftAP. */
4962         __le32 bcn_tx_rate;
4963         /* beacon/probe response xmit power. Applicable for SoftAP. */
4964         __le32 bcn_tx_power;
4965         /* number of p2p NOA descriptor(s) from scan entry */
4966         __le32 num_noa_descriptors;
4967         /*
4968          * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4969          * During CAC, Our HW shouldn't ack ditected frames
4970          */
4971         __le32 disable_hw_ack;
4972         /* actual p2p NOA descriptor from scan entry */
4973         struct wmi_p2p_noa_descriptor noa_descriptors[2];
4974 } __packed;
4975
4976 struct wmi_vdev_restart_request_cmd {
4977         struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4978 } __packed;
4979
4980 struct wmi_vdev_start_request_arg {
4981         u32 vdev_id;
4982         struct wmi_channel_arg channel;
4983         u32 bcn_intval;
4984         u32 dtim_period;
4985         u8 *ssid;
4986         u32 ssid_len;
4987         u32 bcn_tx_rate;
4988         u32 bcn_tx_power;
4989         bool disable_hw_ack;
4990         bool hidden_ssid;
4991         bool pmf_enabled;
4992 };
4993
4994 struct wmi_vdev_delete_cmd {
4995         /* unique id identifying the VDEV, generated by the caller */
4996         __le32 vdev_id;
4997 } __packed;
4998
4999 struct wmi_vdev_up_cmd {
5000         __le32 vdev_id;
5001         __le32 vdev_assoc_id;
5002         struct wmi_mac_addr vdev_bssid;
5003 } __packed;
5004
5005 struct wmi_vdev_stop_cmd {
5006         __le32 vdev_id;
5007 } __packed;
5008
5009 struct wmi_vdev_down_cmd {
5010         __le32 vdev_id;
5011 } __packed;
5012
5013 struct wmi_vdev_standby_response_cmd {
5014         /* unique id identifying the VDEV, generated by the caller */
5015         __le32 vdev_id;
5016 } __packed;
5017
5018 struct wmi_vdev_resume_response_cmd {
5019         /* unique id identifying the VDEV, generated by the caller */
5020         __le32 vdev_id;
5021 } __packed;
5022
5023 struct wmi_vdev_set_param_cmd {
5024         __le32 vdev_id;
5025         __le32 param_id;
5026         __le32 param_value;
5027 } __packed;
5028
5029 #define WMI_MAX_KEY_INDEX   3
5030 #define WMI_MAX_KEY_LEN     32
5031
5032 #define WMI_KEY_PAIRWISE 0x00
5033 #define WMI_KEY_GROUP    0x01
5034 #define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5035
5036 struct wmi_key_seq_counter {
5037         __le32 key_seq_counter_l;
5038         __le32 key_seq_counter_h;
5039 } __packed;
5040
5041 enum wmi_cipher_suites {
5042         WMI_CIPHER_NONE,
5043         WMI_CIPHER_WEP,
5044         WMI_CIPHER_TKIP,
5045         WMI_CIPHER_AES_OCB,
5046         WMI_CIPHER_AES_CCM,
5047         WMI_CIPHER_WAPI,
5048         WMI_CIPHER_CKIP,
5049         WMI_CIPHER_AES_CMAC,
5050         WMI_CIPHER_AES_GCM,
5051 };
5052
5053 enum wmi_tlv_cipher_suites {
5054         WMI_TLV_CIPHER_NONE,
5055         WMI_TLV_CIPHER_WEP,
5056         WMI_TLV_CIPHER_TKIP,
5057         WMI_TLV_CIPHER_AES_OCB,
5058         WMI_TLV_CIPHER_AES_CCM,
5059         WMI_TLV_CIPHER_WAPI,
5060         WMI_TLV_CIPHER_CKIP,
5061         WMI_TLV_CIPHER_AES_CMAC,
5062         WMI_TLV_CIPHER_ANY,
5063         WMI_TLV_CIPHER_AES_GCM,
5064 };
5065
5066 struct wmi_vdev_install_key_cmd {
5067         __le32 vdev_id;
5068         struct wmi_mac_addr peer_macaddr;
5069         __le32 key_idx;
5070         __le32 key_flags;
5071         __le32 key_cipher; /* %WMI_CIPHER_ */
5072         struct wmi_key_seq_counter key_rsc_counter;
5073         struct wmi_key_seq_counter key_global_rsc_counter;
5074         struct wmi_key_seq_counter key_tsc_counter;
5075         u8 wpi_key_rsc_counter[16];
5076         u8 wpi_key_tsc_counter[16];
5077         __le32 key_len;
5078         __le32 key_txmic_len;
5079         __le32 key_rxmic_len;
5080
5081         /* contains key followed by tx mic followed by rx mic */
5082         u8 key_data[];
5083 } __packed;
5084
5085 struct wmi_vdev_install_key_arg {
5086         u32 vdev_id;
5087         const u8 *macaddr;
5088         u32 key_idx;
5089         u32 key_flags;
5090         u32 key_cipher;
5091         u32 key_len;
5092         u32 key_txmic_len;
5093         u32 key_rxmic_len;
5094         const void *key_data;
5095 };
5096
5097 /*
5098  * vdev fixed rate format:
5099  * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5100  * - nss      - b5:b4 - ss number (0 mean 1ss)
5101  * - rate_mcs - b3:b0 - as below
5102  *    CCK:  0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5103  *          4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5104  *    OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5105  *          4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5106  *    HT/VHT: MCS index
5107  */
5108
5109 /* Preamble types to be used with VDEV fixed rate configuration */
5110 enum wmi_rate_preamble {
5111         WMI_RATE_PREAMBLE_OFDM,
5112         WMI_RATE_PREAMBLE_CCK,
5113         WMI_RATE_PREAMBLE_HT,
5114         WMI_RATE_PREAMBLE_VHT,
5115 };
5116
5117 #define ATH10K_HW_NSS(rate)             (1 + (((rate) >> 4) & 0x3))
5118 #define ATH10K_HW_PREAMBLE(rate)        (((rate) >> 6) & 0x3)
5119 #define ATH10K_HW_MCS_RATE(rate)        ((rate) & 0xf)
5120 #define ATH10K_HW_LEGACY_RATE(rate)     ((rate) & 0x3f)
5121 #define ATH10K_HW_BW(flags)             (((flags) >> 3) & 0x3)
5122 #define ATH10K_HW_GI(flags)             (((flags) >> 5) & 0x1)
5123 #define ATH10K_HW_RATECODE(rate, nss, preamble) \
5124         (((preamble) << 6) | ((nss) << 4) | (rate))
5125 #define ATH10K_HW_AMPDU(flags)          ((flags) & 0x1)
5126 #define ATH10K_HW_BA_FAIL(flags)        (((flags) >> 1) & 0x3)
5127 #define ATH10K_FW_SKIPPED_RATE_CTRL(flags)      (((flags) >> 6) & 0x1)
5128
5129 #define ATH10K_VHT_MCS_NUM      10
5130 #define ATH10K_BW_NUM           6
5131 #define ATH10K_NSS_NUM          4
5132 #define ATH10K_LEGACY_NUM       12
5133 #define ATH10K_GI_NUM           2
5134 #define ATH10K_HT_MCS_NUM       32
5135 #define ATH10K_RATE_TABLE_NUM   320
5136 #define ATH10K_RATE_INFO_FLAGS_SGI_BIT  2
5137
5138 /* Value to disable fixed rate setting */
5139 #define WMI_FIXED_RATE_NONE    (0xff)
5140
5141 struct wmi_peer_param_map {
5142         u32 smps_state;
5143         u32 ampdu;
5144         u32 authorize;
5145         u32 chan_width;
5146         u32 nss;
5147         u32 use_4addr;
5148         u32 membership;
5149         u32 use_fixed_power;
5150         u32 user_pos;
5151         u32 crit_proto_hint_enabled;
5152         u32 tx_fail_cnt_thr;
5153         u32 set_hw_retry_cts2s;
5154         u32 ibss_atim_win_len;
5155         u32 debug;
5156         u32 phymode;
5157         u32 dummy_var;
5158 };
5159
5160 struct wmi_vdev_param_map {
5161         u32 rts_threshold;
5162         u32 fragmentation_threshold;
5163         u32 beacon_interval;
5164         u32 listen_interval;
5165         u32 multicast_rate;
5166         u32 mgmt_tx_rate;
5167         u32 slot_time;
5168         u32 preamble;
5169         u32 swba_time;
5170         u32 wmi_vdev_stats_update_period;
5171         u32 wmi_vdev_pwrsave_ageout_time;
5172         u32 wmi_vdev_host_swba_interval;
5173         u32 dtim_period;
5174         u32 wmi_vdev_oc_scheduler_air_time_limit;
5175         u32 wds;
5176         u32 atim_window;
5177         u32 bmiss_count_max;
5178         u32 bmiss_first_bcnt;
5179         u32 bmiss_final_bcnt;
5180         u32 feature_wmm;
5181         u32 chwidth;
5182         u32 chextoffset;
5183         u32 disable_htprotection;
5184         u32 sta_quickkickout;
5185         u32 mgmt_rate;
5186         u32 protection_mode;
5187         u32 fixed_rate;
5188         u32 sgi;
5189         u32 ldpc;
5190         u32 tx_stbc;
5191         u32 rx_stbc;
5192         u32 intra_bss_fwd;
5193         u32 def_keyid;
5194         u32 nss;
5195         u32 bcast_data_rate;
5196         u32 mcast_data_rate;
5197         u32 mcast_indicate;
5198         u32 dhcp_indicate;
5199         u32 unknown_dest_indicate;
5200         u32 ap_keepalive_min_idle_inactive_time_secs;
5201         u32 ap_keepalive_max_idle_inactive_time_secs;
5202         u32 ap_keepalive_max_unresponsive_time_secs;
5203         u32 ap_enable_nawds;
5204         u32 mcast2ucast_set;
5205         u32 enable_rtscts;
5206         u32 txbf;
5207         u32 packet_powersave;
5208         u32 drop_unencry;
5209         u32 tx_encap_type;
5210         u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5211         u32 rc_num_retries;
5212         u32 cabq_maxdur;
5213         u32 mfptest_set;
5214         u32 rts_fixed_rate;
5215         u32 vht_sgimask;
5216         u32 vht80_ratemask;
5217         u32 early_rx_adjust_enable;
5218         u32 early_rx_tgt_bmiss_num;
5219         u32 early_rx_bmiss_sample_cycle;
5220         u32 early_rx_slop_step;
5221         u32 early_rx_init_slop;
5222         u32 early_rx_adjust_pause;
5223         u32 proxy_sta;
5224         u32 meru_vc;
5225         u32 rx_decap_type;
5226         u32 bw_nss_ratemask;
5227         u32 inc_tsf;
5228         u32 dec_tsf;
5229         u32 disable_4addr_src_lrn;
5230         u32 rtt_responder_role;
5231 };
5232
5233 #define WMI_VDEV_PARAM_UNSUPPORTED 0
5234
5235 /* the definition of different VDEV parameters */
5236 enum wmi_vdev_param {
5237         /* RTS Threshold */
5238         WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5239         /* Fragmentation threshold */
5240         WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5241         /* beacon interval in TUs */
5242         WMI_VDEV_PARAM_BEACON_INTERVAL,
5243         /* Listen interval in TUs */
5244         WMI_VDEV_PARAM_LISTEN_INTERVAL,
5245         /* multicast rate in Mbps */
5246         WMI_VDEV_PARAM_MULTICAST_RATE,
5247         /* management frame rate in Mbps */
5248         WMI_VDEV_PARAM_MGMT_TX_RATE,
5249         /* slot time (long vs short) */
5250         WMI_VDEV_PARAM_SLOT_TIME,
5251         /* preamble (long vs short) */
5252         WMI_VDEV_PARAM_PREAMBLE,
5253         /* SWBA time (time before tbtt in msec) */
5254         WMI_VDEV_PARAM_SWBA_TIME,
5255         /* time period for updating VDEV stats */
5256         WMI_VDEV_STATS_UPDATE_PERIOD,
5257         /* age out time in msec for frames queued for station in power save */
5258         WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5259         /*
5260          * Host SWBA interval (time in msec before tbtt for SWBA event
5261          * generation).
5262          */
5263         WMI_VDEV_HOST_SWBA_INTERVAL,
5264         /* DTIM period (specified in units of num beacon intervals) */
5265         WMI_VDEV_PARAM_DTIM_PERIOD,
5266         /*
5267          * scheduler air time limit for this VDEV. used by off chan
5268          * scheduler.
5269          */
5270         WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5271         /* enable/disable WDS for this VDEV  */
5272         WMI_VDEV_PARAM_WDS,
5273         /* ATIM Window */
5274         WMI_VDEV_PARAM_ATIM_WINDOW,
5275         /* BMISS max */
5276         WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5277         /* BMISS first time */
5278         WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5279         /* BMISS final time */
5280         WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5281         /* WMM enables/disabled */
5282         WMI_VDEV_PARAM_FEATURE_WMM,
5283         /* Channel width */
5284         WMI_VDEV_PARAM_CHWIDTH,
5285         /* Channel Offset */
5286         WMI_VDEV_PARAM_CHEXTOFFSET,
5287         /* Disable HT Protection */
5288         WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5289         /* Quick STA Kickout */
5290         WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5291         /* Rate to be used with Management frames */
5292         WMI_VDEV_PARAM_MGMT_RATE,
5293         /* Protection Mode */
5294         WMI_VDEV_PARAM_PROTECTION_MODE,
5295         /* Fixed rate setting */
5296         WMI_VDEV_PARAM_FIXED_RATE,
5297         /* Short GI Enable/Disable */
5298         WMI_VDEV_PARAM_SGI,
5299         /* Enable LDPC */
5300         WMI_VDEV_PARAM_LDPC,
5301         /* Enable Tx STBC */
5302         WMI_VDEV_PARAM_TX_STBC,
5303         /* Enable Rx STBC */
5304         WMI_VDEV_PARAM_RX_STBC,
5305         /* Intra BSS forwarding  */
5306         WMI_VDEV_PARAM_INTRA_BSS_FWD,
5307         /* Setting Default xmit key for Vdev */
5308         WMI_VDEV_PARAM_DEF_KEYID,
5309         /* NSS width */
5310         WMI_VDEV_PARAM_NSS,
5311         /* Set the custom rate for the broadcast data frames */
5312         WMI_VDEV_PARAM_BCAST_DATA_RATE,
5313         /* Set the custom rate (rate-code) for multicast data frames */
5314         WMI_VDEV_PARAM_MCAST_DATA_RATE,
5315         /* Tx multicast packet indicate Enable/Disable */
5316         WMI_VDEV_PARAM_MCAST_INDICATE,
5317         /* Tx DHCP packet indicate Enable/Disable */
5318         WMI_VDEV_PARAM_DHCP_INDICATE,
5319         /* Enable host inspection of Tx unicast packet to unknown destination */
5320         WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5321
5322         /* The minimum amount of time AP begins to consider STA inactive */
5323         WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5324
5325         /*
5326          * An associated STA is considered inactive when there is no recent
5327          * TX/RX activity and no downlink frames are buffered for it. Once a
5328          * STA exceeds the maximum idle inactive time, the AP will send an
5329          * 802.11 data-null as a keep alive to verify the STA is still
5330          * associated. If the STA does ACK the data-null, or if the data-null
5331          * is buffered and the STA does not retrieve it, the STA will be
5332          * considered unresponsive
5333          * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5334          */
5335         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5336
5337         /*
5338          * An associated STA is considered unresponsive if there is no recent
5339          * TX/RX activity and downlink frames are buffered for it. Once a STA
5340          * exceeds the maximum unresponsive time, the AP will send a
5341          * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5342          */
5343         WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5344
5345         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5346         WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5347         /* Enable/Disable RTS-CTS */
5348         WMI_VDEV_PARAM_ENABLE_RTSCTS,
5349         /* Enable TXBFee/er */
5350         WMI_VDEV_PARAM_TXBF,
5351
5352         /* Set packet power save */
5353         WMI_VDEV_PARAM_PACKET_POWERSAVE,
5354
5355         /*
5356          * Drops un-encrypted packets if eceived in an encrypted connection
5357          * otherwise forwards to host.
5358          */
5359         WMI_VDEV_PARAM_DROP_UNENCRY,
5360
5361         /*
5362          * Set the encapsulation type for frames.
5363          */
5364         WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5365 };
5366
5367 /* the definition of different VDEV parameters */
5368 enum wmi_10x_vdev_param {
5369         /* RTS Threshold */
5370         WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5371         /* Fragmentation threshold */
5372         WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5373         /* beacon interval in TUs */
5374         WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5375         /* Listen interval in TUs */
5376         WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5377         /* multicast rate in Mbps */
5378         WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5379         /* management frame rate in Mbps */
5380         WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5381         /* slot time (long vs short) */
5382         WMI_10X_VDEV_PARAM_SLOT_TIME,
5383         /* preamble (long vs short) */
5384         WMI_10X_VDEV_PARAM_PREAMBLE,
5385         /* SWBA time (time before tbtt in msec) */
5386         WMI_10X_VDEV_PARAM_SWBA_TIME,
5387         /* time period for updating VDEV stats */
5388         WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5389         /* age out time in msec for frames queued for station in power save */
5390         WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5391         /*
5392          * Host SWBA interval (time in msec before tbtt for SWBA event
5393          * generation).
5394          */
5395         WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5396         /* DTIM period (specified in units of num beacon intervals) */
5397         WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5398         /*
5399          * scheduler air time limit for this VDEV. used by off chan
5400          * scheduler.
5401          */
5402         WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5403         /* enable/disable WDS for this VDEV  */
5404         WMI_10X_VDEV_PARAM_WDS,
5405         /* ATIM Window */
5406         WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5407         /* BMISS max */
5408         WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5409         /* WMM enables/disabled */
5410         WMI_10X_VDEV_PARAM_FEATURE_WMM,
5411         /* Channel width */
5412         WMI_10X_VDEV_PARAM_CHWIDTH,
5413         /* Channel Offset */
5414         WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5415         /* Disable HT Protection */
5416         WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5417         /* Quick STA Kickout */
5418         WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5419         /* Rate to be used with Management frames */
5420         WMI_10X_VDEV_PARAM_MGMT_RATE,
5421         /* Protection Mode */
5422         WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5423         /* Fixed rate setting */
5424         WMI_10X_VDEV_PARAM_FIXED_RATE,
5425         /* Short GI Enable/Disable */
5426         WMI_10X_VDEV_PARAM_SGI,
5427         /* Enable LDPC */
5428         WMI_10X_VDEV_PARAM_LDPC,
5429         /* Enable Tx STBC */
5430         WMI_10X_VDEV_PARAM_TX_STBC,
5431         /* Enable Rx STBC */
5432         WMI_10X_VDEV_PARAM_RX_STBC,
5433         /* Intra BSS forwarding  */
5434         WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5435         /* Setting Default xmit key for Vdev */
5436         WMI_10X_VDEV_PARAM_DEF_KEYID,
5437         /* NSS width */
5438         WMI_10X_VDEV_PARAM_NSS,
5439         /* Set the custom rate for the broadcast data frames */
5440         WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5441         /* Set the custom rate (rate-code) for multicast data frames */
5442         WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5443         /* Tx multicast packet indicate Enable/Disable */
5444         WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5445         /* Tx DHCP packet indicate Enable/Disable */
5446         WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5447         /* Enable host inspection of Tx unicast packet to unknown destination */
5448         WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5449
5450         /* The minimum amount of time AP begins to consider STA inactive */
5451         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5452
5453         /*
5454          * An associated STA is considered inactive when there is no recent
5455          * TX/RX activity and no downlink frames are buffered for it. Once a
5456          * STA exceeds the maximum idle inactive time, the AP will send an
5457          * 802.11 data-null as a keep alive to verify the STA is still
5458          * associated. If the STA does ACK the data-null, or if the data-null
5459          * is buffered and the STA does not retrieve it, the STA will be
5460          * considered unresponsive
5461          * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5462          */
5463         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5464
5465         /*
5466          * An associated STA is considered unresponsive if there is no recent
5467          * TX/RX activity and downlink frames are buffered for it. Once a STA
5468          * exceeds the maximum unresponsive time, the AP will send a
5469          * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5470          */
5471         WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5472
5473         /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5474         WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5475
5476         WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5477         /* Enable/Disable RTS-CTS */
5478         WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5479
5480         WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5481
5482         /* following are available as of firmware 10.2 */
5483         WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5484         WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5485         WMI_10X_VDEV_PARAM_MFPTEST_SET,
5486         WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5487         WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5488         WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5489         WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5490 };
5491
5492 enum wmi_10_4_vdev_param {
5493         WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5494         WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5495         WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5496         WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5497         WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5498         WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5499         WMI_10_4_VDEV_PARAM_SLOT_TIME,
5500         WMI_10_4_VDEV_PARAM_PREAMBLE,
5501         WMI_10_4_VDEV_PARAM_SWBA_TIME,
5502         WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5503         WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5504         WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5505         WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5506         WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5507         WMI_10_4_VDEV_PARAM_WDS,
5508         WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5509         WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5510         WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5511         WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5512         WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5513         WMI_10_4_VDEV_PARAM_CHWIDTH,
5514         WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5515         WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5516         WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5517         WMI_10_4_VDEV_PARAM_MGMT_RATE,
5518         WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5519         WMI_10_4_VDEV_PARAM_FIXED_RATE,
5520         WMI_10_4_VDEV_PARAM_SGI,
5521         WMI_10_4_VDEV_PARAM_LDPC,
5522         WMI_10_4_VDEV_PARAM_TX_STBC,
5523         WMI_10_4_VDEV_PARAM_RX_STBC,
5524         WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5525         WMI_10_4_VDEV_PARAM_DEF_KEYID,
5526         WMI_10_4_VDEV_PARAM_NSS,
5527         WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5528         WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5529         WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5530         WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5531         WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5532         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5533         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5534         WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5535         WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5536         WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5537         WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5538         WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5539         WMI_10_4_VDEV_PARAM_TXBF,
5540         WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5541         WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5542         WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5543         WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5544         WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5545         WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5546         WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5547         WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5548         WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5549         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5550         WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5551         WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5552         WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5553         WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5554         WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5555         WMI_10_4_VDEV_PARAM_PROXY_STA,
5556         WMI_10_4_VDEV_PARAM_MERU_VC,
5557         WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5558         WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5559         WMI_10_4_VDEV_PARAM_SENSOR_AP,
5560         WMI_10_4_VDEV_PARAM_BEACON_RATE,
5561         WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5562         WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5563         WMI_10_4_VDEV_PARAM_CAPABILITIES,
5564         WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5565         WMI_10_4_VDEV_PARAM_RX_FILTER,
5566         WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5567         WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5568         WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5569         WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5570         WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5571         WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5572         WMI_10_4_VDEV_PARAM_NSS_VHT160,
5573         WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5574         WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5575         WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5576         WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5577         WMI_10_4_VDEV_PARAM_TX_POWER,
5578         WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5579         WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5580 };
5581
5582 #define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5583
5584 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5585 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5586 #define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5587 #define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5588
5589 #define WMI_TXBF_STS_CAP_OFFSET_LSB     4
5590 #define WMI_TXBF_STS_CAP_OFFSET_MASK    0x70
5591 #define WMI_TXBF_CONF_IMPLICIT_BF       BIT(7)
5592 #define WMI_BF_SOUND_DIM_OFFSET_LSB     8
5593 #define WMI_BF_SOUND_DIM_OFFSET_MASK    0xf00
5594
5595 /* slot time long */
5596 #define WMI_VDEV_SLOT_TIME_LONG         0x1
5597 /* slot time short */
5598 #define WMI_VDEV_SLOT_TIME_SHORT        0x2
5599 /* preablbe long */
5600 #define WMI_VDEV_PREAMBLE_LONG          0x1
5601 /* preablbe short */
5602 #define WMI_VDEV_PREAMBLE_SHORT         0x2
5603
5604 enum wmi_start_event_param {
5605         WMI_VDEV_RESP_START_EVENT = 0,
5606         WMI_VDEV_RESP_RESTART_EVENT,
5607 };
5608
5609 struct wmi_vdev_start_response_event {
5610         __le32 vdev_id;
5611         __le32 req_id;
5612         __le32 resp_type; /* %WMI_VDEV_RESP_ */
5613         __le32 status;
5614 } __packed;
5615
5616 struct wmi_vdev_standby_req_event {
5617         /* unique id identifying the VDEV, generated by the caller */
5618         __le32 vdev_id;
5619 } __packed;
5620
5621 struct wmi_vdev_resume_req_event {
5622         /* unique id identifying the VDEV, generated by the caller */
5623         __le32 vdev_id;
5624 } __packed;
5625
5626 struct wmi_vdev_stopped_event {
5627         /* unique id identifying the VDEV, generated by the caller */
5628         __le32 vdev_id;
5629 } __packed;
5630
5631 /*
5632  * common structure used for simple events
5633  * (stopped, resume_req, standby response)
5634  */
5635 struct wmi_vdev_simple_event {
5636         /* unique id identifying the VDEV, generated by the caller */
5637         __le32 vdev_id;
5638 } __packed;
5639
5640 /* VDEV start response status codes */
5641 /* VDEV successfully started */
5642 #define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS  0x0
5643
5644 /* requested VDEV not found */
5645 #define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID  0x1
5646
5647 /* unsupported VDEV combination */
5648 #define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED   0x2
5649
5650 /* TODO: please add more comments if you have in-depth information */
5651 struct wmi_vdev_spectral_conf_cmd {
5652         __le32 vdev_id;
5653
5654         /* number of fft samples to send (0 for infinite) */
5655         __le32 scan_count;
5656         __le32 scan_period;
5657         __le32 scan_priority;
5658
5659         /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5660         __le32 scan_fft_size;
5661         __le32 scan_gc_ena;
5662         __le32 scan_restart_ena;
5663         __le32 scan_noise_floor_ref;
5664         __le32 scan_init_delay;
5665         __le32 scan_nb_tone_thr;
5666         __le32 scan_str_bin_thr;
5667         __le32 scan_wb_rpt_mode;
5668         __le32 scan_rssi_rpt_mode;
5669         __le32 scan_rssi_thr;
5670         __le32 scan_pwr_format;
5671
5672         /* rpt_mode: Format of FFT report to software for spectral scan
5673          * triggered FFTs:
5674          *      0: No FFT report (only spectral scan summary report)
5675          *      1: 2-dword summary of metrics for each completed FFT + spectral
5676          *         scan summary report
5677          *      2: 2-dword summary of metrics for each completed FFT +
5678          *         1x- oversampled bins(in-band) per FFT + spectral scan summary
5679          *         report
5680          *      3: 2-dword summary of metrics for each completed FFT +
5681          *         2x- oversampled bins (all) per FFT + spectral scan summary
5682          */
5683         __le32 scan_rpt_mode;
5684         __le32 scan_bin_scale;
5685         __le32 scan_dbm_adj;
5686         __le32 scan_chn_mask;
5687 } __packed;
5688
5689 struct wmi_vdev_spectral_conf_arg {
5690         u32 vdev_id;
5691         u32 scan_count;
5692         u32 scan_period;
5693         u32 scan_priority;
5694         u32 scan_fft_size;
5695         u32 scan_gc_ena;
5696         u32 scan_restart_ena;
5697         u32 scan_noise_floor_ref;
5698         u32 scan_init_delay;
5699         u32 scan_nb_tone_thr;
5700         u32 scan_str_bin_thr;
5701         u32 scan_wb_rpt_mode;
5702         u32 scan_rssi_rpt_mode;
5703         u32 scan_rssi_thr;
5704         u32 scan_pwr_format;
5705         u32 scan_rpt_mode;
5706         u32 scan_bin_scale;
5707         u32 scan_dbm_adj;
5708         u32 scan_chn_mask;
5709 };
5710
5711 #define WMI_SPECTRAL_ENABLE_DEFAULT              0
5712 #define WMI_SPECTRAL_COUNT_DEFAULT               0
5713 #define WMI_SPECTRAL_PERIOD_DEFAULT             35
5714 #define WMI_SPECTRAL_PRIORITY_DEFAULT            1
5715 #define WMI_SPECTRAL_FFT_SIZE_DEFAULT            7
5716 #define WMI_SPECTRAL_GC_ENA_DEFAULT              1
5717 #define WMI_SPECTRAL_RESTART_ENA_DEFAULT         0
5718 #define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT   -96
5719 #define WMI_SPECTRAL_INIT_DELAY_DEFAULT         80
5720 #define WMI_SPECTRAL_NB_TONE_THR_DEFAULT        12
5721 #define WMI_SPECTRAL_STR_BIN_THR_DEFAULT         8
5722 #define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT         0
5723 #define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT       0
5724 #define WMI_SPECTRAL_RSSI_THR_DEFAULT         0xf0
5725 #define WMI_SPECTRAL_PWR_FORMAT_DEFAULT          0
5726 #define WMI_SPECTRAL_RPT_MODE_DEFAULT            2
5727 #define WMI_SPECTRAL_BIN_SCALE_DEFAULT           1
5728 #define WMI_SPECTRAL_DBM_ADJ_DEFAULT             1
5729 #define WMI_SPECTRAL_CHN_MASK_DEFAULT            1
5730
5731 struct wmi_vdev_spectral_enable_cmd {
5732         __le32 vdev_id;
5733         __le32 trigger_cmd;
5734         __le32 enable_cmd;
5735 } __packed;
5736
5737 #define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER  1
5738 #define WMI_SPECTRAL_TRIGGER_CMD_CLEAR    2
5739 #define WMI_SPECTRAL_ENABLE_CMD_ENABLE    1
5740 #define WMI_SPECTRAL_ENABLE_CMD_DISABLE   2
5741
5742 /* Beacon processing related command and event structures */
5743 struct wmi_bcn_tx_hdr {
5744         __le32 vdev_id;
5745         __le32 tx_rate;
5746         __le32 tx_power;
5747         __le32 bcn_len;
5748 } __packed;
5749
5750 struct wmi_bcn_tx_cmd {
5751         struct wmi_bcn_tx_hdr hdr;
5752         u8 *bcn[];
5753 } __packed;
5754
5755 struct wmi_bcn_tx_arg {
5756         u32 vdev_id;
5757         u32 tx_rate;
5758         u32 tx_power;
5759         u32 bcn_len;
5760         const void *bcn;
5761 };
5762
5763 enum wmi_bcn_tx_ref_flags {
5764         WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5765         WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5766 };
5767
5768 /* TODO: It is unclear why "no antenna" works while any other seemingly valid
5769  * chainmask yields no beacons on the air at all.
5770  */
5771 #define WMI_BCN_TX_REF_DEF_ANTENNA 0
5772
5773 struct wmi_bcn_tx_ref_cmd {
5774         __le32 vdev_id;
5775         __le32 data_len;
5776         /* physical address of the frame - dma pointer */
5777         __le32 data_ptr;
5778         /* id for host to track */
5779         __le32 msdu_id;
5780         /* frame ctrl to setup PPDU desc */
5781         __le32 frame_control;
5782         /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5783         __le32 flags;
5784         /* introduced in 10.2 */
5785         __le32 antenna_mask;
5786 } __packed;
5787
5788 /* Beacon filter */
5789 #define WMI_BCN_FILTER_ALL   0 /* Filter all beacons */
5790 #define WMI_BCN_FILTER_NONE  1 /* Pass all beacons */
5791 #define WMI_BCN_FILTER_RSSI  2 /* Pass Beacons RSSI >= RSSI threshold */
5792 #define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5793 #define WMI_BCN_FILTER_SSID  4 /* Pass Beacons with matching SSID */
5794
5795 struct wmi_bcn_filter_rx_cmd {
5796         /* Filter ID */
5797         __le32 bcn_filter_id;
5798         /* Filter type - wmi_bcn_filter */
5799         __le32 bcn_filter;
5800         /* Buffer len */
5801         __le32 bcn_filter_len;
5802         /* Filter info (threshold, BSSID, RSSI) */
5803         u8 *bcn_filter_buf;
5804 } __packed;
5805
5806 /* Capabilities and IEs to be passed to firmware */
5807 struct wmi_bcn_prb_info {
5808         /* Capabilities */
5809         __le32 caps;
5810         /* ERP info */
5811         __le32 erp;
5812         /* Advanced capabilities */
5813         /* HT capabilities */
5814         /* HT Info */
5815         /* ibss_dfs */
5816         /* wpa Info */
5817         /* rsn Info */
5818         /* rrm info */
5819         /* ath_ext */
5820         /* app IE */
5821 } __packed;
5822
5823 enum wmi_sta_ps_mode {
5824         /* enable power save for the given STA VDEV */
5825         WMI_STA_PS_MODE_DISABLED = 0,
5826         /* disable power save  for a given STA VDEV */
5827         WMI_STA_PS_MODE_ENABLED = 1,
5828 };
5829
5830 struct wmi_sta_powersave_mode_cmd {
5831         /* unique id identifying the VDEV, generated by the caller */
5832         __le32 vdev_id;
5833
5834         /*
5835          * Power save mode
5836          * (see enum wmi_sta_ps_mode)
5837          */
5838         __le32 sta_ps_mode;
5839 } __packed;
5840
5841 enum wmi_csa_offload_en {
5842         WMI_CSA_OFFLOAD_DISABLE = 0,
5843         WMI_CSA_OFFLOAD_ENABLE = 1,
5844 };
5845
5846 struct wmi_csa_offload_enable_cmd {
5847         __le32 vdev_id;
5848         __le32 csa_offload_enable;
5849 } __packed;
5850
5851 struct wmi_csa_offload_chanswitch_cmd {
5852         __le32 vdev_id;
5853         struct wmi_channel chan;
5854 } __packed;
5855
5856 /*
5857  * This parameter controls the policy for retrieving frames from AP while the
5858  * STA is in sleep state.
5859  *
5860  * Only takes affect if the sta_ps_mode is enabled
5861  */
5862 enum wmi_sta_ps_param_rx_wake_policy {
5863         /*
5864          * Wake up when ever there is an  RX activity on the VDEV. In this mode
5865          * the Power save SM(state machine) will come out of sleep by either
5866          * sending null frame (or) a data frame (with PS==0) in response to TIM
5867          * bit set in the received beacon frame from AP.
5868          */
5869         WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5870
5871         /*
5872          * Here the power save state machine will not wakeup in response to TIM
5873          * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5874          * configuration setup by WMISET_PS_SET_UAPSD  WMI command.  When all
5875          * access categories are delivery-enabled, the station will send a
5876          * UAPSD trigger frame, otherwise it will send a PS-Poll.
5877          */
5878         WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5879 };
5880
5881 /*
5882  * Number of tx frames/beacon  that cause the power save SM to wake up.
5883  *
5884  * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5885  * meaning, It will cause the SM to never wake up. This is useful if you want
5886  * to keep the system to sleep all the time for some kind of test mode . host
5887  * can change this parameter any time.  It will affect at the next tx frame.
5888  */
5889 enum wmi_sta_ps_param_tx_wake_threshold {
5890         WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5891         WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5892
5893         /*
5894          * Values greater than one indicate that many TX attempts per beacon
5895          * interval before the STA will wake up
5896          */
5897 };
5898
5899 /*
5900  * The maximum number of PS-Poll frames the FW will send in response to
5901  * traffic advertised in TIM before waking up (by sending a null frame with PS
5902  * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5903  * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5904  * parameter is used when the RX wake policy is
5905  * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5906  * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5907  */
5908 enum wmi_sta_ps_param_pspoll_count {
5909         WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5910         /*
5911          * Values greater than 0 indicate the maximum number of PS-Poll frames
5912          * FW will send before waking up.
5913          */
5914
5915         /* When u-APSD is enabled the firmware will be very reluctant to exit
5916          * STA PS. This could result in very poor Rx performance with STA doing
5917          * PS-Poll for each and every buffered frame. This value is a bit
5918          * arbitrary.
5919          */
5920         WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5921 };
5922
5923 /*
5924  * This will include the delivery and trigger enabled state for every AC.
5925  * This is the negotiated state with AP. The host MLME needs to set this based
5926  * on AP capability and the state Set in the association request by the
5927  * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5928  */
5929 #define WMI_UAPSD_AC_TYPE_DELI 0
5930 #define WMI_UAPSD_AC_TYPE_TRIG 1
5931
5932 #define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5933         (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5934
5935 enum wmi_sta_ps_param_uapsd {
5936         WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5937         WMI_STA_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
5938         WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5939         WMI_STA_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
5940         WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5941         WMI_STA_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
5942         WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5943         WMI_STA_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
5944 };
5945
5946 #define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5947
5948 struct wmi_sta_uapsd_auto_trig_param {
5949         __le32 wmm_ac;
5950         __le32 user_priority;
5951         __le32 service_interval;
5952         __le32 suspend_interval;
5953         __le32 delay_interval;
5954 };
5955
5956 struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5957         __le32 vdev_id;
5958         struct wmi_mac_addr peer_macaddr;
5959         __le32 num_ac;
5960 };
5961
5962 struct wmi_sta_uapsd_auto_trig_arg {
5963         u32 wmm_ac;
5964         u32 user_priority;
5965         u32 service_interval;
5966         u32 suspend_interval;
5967         u32 delay_interval;
5968 };
5969
5970 enum wmi_sta_powersave_param {
5971         /*
5972          * Controls how frames are retrievd from AP while STA is sleeping
5973          *
5974          * (see enum wmi_sta_ps_param_rx_wake_policy)
5975          */
5976         WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5977
5978         /*
5979          * The STA will go active after this many TX
5980          *
5981          * (see enum wmi_sta_ps_param_tx_wake_threshold)
5982          */
5983         WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5984
5985         /*
5986          * Number of PS-Poll to send before STA wakes up
5987          *
5988          * (see enum wmi_sta_ps_param_pspoll_count)
5989          *
5990          */
5991         WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5992
5993         /*
5994          * TX/RX inactivity time in msec before going to sleep.
5995          *
5996          * The power save SM will monitor tx/rx activity on the VDEV, if no
5997          * activity for the specified msec of the parameter the Power save
5998          * SM will go to sleep.
5999          */
6000         WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
6001
6002         /*
6003          * Set uapsd configuration.
6004          *
6005          * (see enum wmi_sta_ps_param_uapsd)
6006          */
6007         WMI_STA_PS_PARAM_UAPSD = 4,
6008 };
6009
6010 struct wmi_sta_powersave_param_cmd {
6011         __le32 vdev_id;
6012         __le32 param_id; /* %WMI_STA_PS_PARAM_ */
6013         __le32 param_value;
6014 } __packed;
6015
6016 /* No MIMO power save */
6017 #define WMI_STA_MIMO_PS_MODE_DISABLE
6018 /* mimo powersave mode static*/
6019 #define WMI_STA_MIMO_PS_MODE_STATIC
6020 /* mimo powersave mode dynamic */
6021 #define WMI_STA_MIMO_PS_MODE_DYNAMIC
6022
6023 struct wmi_sta_mimo_ps_mode_cmd {
6024         /* unique id identifying the VDEV, generated by the caller */
6025         __le32 vdev_id;
6026         /* mimo powersave mode as defined above */
6027         __le32 mimo_pwrsave_mode;
6028 } __packed;
6029
6030 /* U-APSD configuration of peer station from (re)assoc request and TSPECs */
6031 enum wmi_ap_ps_param_uapsd {
6032         WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
6033         WMI_AP_PS_UAPSD_AC0_TRIGGER_EN  = (1 << 1),
6034         WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6035         WMI_AP_PS_UAPSD_AC1_TRIGGER_EN  = (1 << 3),
6036         WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6037         WMI_AP_PS_UAPSD_AC2_TRIGGER_EN  = (1 << 5),
6038         WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6039         WMI_AP_PS_UAPSD_AC3_TRIGGER_EN  = (1 << 7),
6040 };
6041
6042 /* U-APSD maximum service period of peer station */
6043 enum wmi_ap_ps_peer_param_max_sp {
6044         WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6045         WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6046         WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6047         WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6048         MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6049 };
6050
6051 /*
6052  * AP power save parameter
6053  * Set a power save specific parameter for a peer station
6054  */
6055 enum wmi_ap_ps_peer_param {
6056         /* Set uapsd configuration for a given peer.
6057          *
6058          * Include the delivery and trigger enabled state for every AC.
6059          * The host  MLME needs to set this based on AP capability and stations
6060          * request Set in the association request  received from the station.
6061          *
6062          * Lower 8 bits of the value specify the UAPSD configuration.
6063          *
6064          * (see enum wmi_ap_ps_param_uapsd)
6065          * The default value is 0.
6066          */
6067         WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6068
6069         /*
6070          * Set the service period for a UAPSD capable station
6071          *
6072          * The service period from wme ie in the (re)assoc request frame.
6073          *
6074          * (see enum wmi_ap_ps_peer_param_max_sp)
6075          */
6076         WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6077
6078         /* Time in seconds for aging out buffered frames for STA in PS */
6079         WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6080 };
6081
6082 struct wmi_ap_ps_peer_cmd {
6083         /* unique id identifying the VDEV, generated by the caller */
6084         __le32 vdev_id;
6085
6086         /* peer MAC address */
6087         struct wmi_mac_addr peer_macaddr;
6088
6089         /* AP powersave param (see enum wmi_ap_ps_peer_param) */
6090         __le32 param_id;
6091
6092         /* AP powersave param value */
6093         __le32 param_value;
6094 } __packed;
6095
6096 /* 128 clients = 4 words */
6097 #define WMI_TIM_BITMAP_ARRAY_SIZE 4
6098
6099 struct wmi_tim_info {
6100         __le32 tim_len;
6101         __le32 tim_mcast;
6102         __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6103         __le32 tim_changed;
6104         __le32 tim_num_ps_pending;
6105 } __packed;
6106
6107 struct wmi_tim_info_arg {
6108         __le32 tim_len;
6109         __le32 tim_mcast;
6110         const __le32 *tim_bitmap;
6111         __le32 tim_changed;
6112         __le32 tim_num_ps_pending;
6113 } __packed;
6114
6115 /* Maximum number of NOA Descriptors supported */
6116 #define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6117 #define WMI_P2P_OPPPS_ENABLE_BIT        BIT(0)
6118 #define WMI_P2P_OPPPS_CTWINDOW_OFFSET   1
6119 #define WMI_P2P_NOA_CHANGED_BIT BIT(0)
6120
6121 struct wmi_p2p_noa_info {
6122         /* Bit 0 - Flag to indicate an update in NOA schedule
6123          * Bits 7-1 - Reserved
6124          */
6125         u8 changed;
6126         /* NOA index */
6127         u8 index;
6128         /* Bit 0 - Opp PS state of the AP
6129          * Bits 1-7 - Ctwindow in TUs
6130          */
6131         u8 ctwindow_oppps;
6132         /* Number of NOA descriptors */
6133         u8 num_descriptors;
6134
6135         struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6136 } __packed;
6137
6138 struct wmi_bcn_info {
6139         struct wmi_tim_info tim_info;
6140         struct wmi_p2p_noa_info p2p_noa_info;
6141 } __packed;
6142
6143 struct wmi_host_swba_event {
6144         __le32 vdev_map;
6145         struct wmi_bcn_info bcn_info[];
6146 } __packed;
6147
6148 struct wmi_10_2_4_bcn_info {
6149         struct wmi_tim_info tim_info;
6150         /* The 10.2.4 FW doesn't have p2p NOA info */
6151 } __packed;
6152
6153 struct wmi_10_2_4_host_swba_event {
6154         __le32 vdev_map;
6155         struct wmi_10_2_4_bcn_info bcn_info[];
6156 } __packed;
6157
6158 /* 16 words = 512 client + 1 word = for guard */
6159 #define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6160
6161 struct wmi_10_4_tim_info {
6162         __le32 tim_len;
6163         __le32 tim_mcast;
6164         __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6165         __le32 tim_changed;
6166         __le32 tim_num_ps_pending;
6167 } __packed;
6168
6169 #define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6170
6171 struct wmi_10_4_p2p_noa_info {
6172         /* Bit 0 - Flag to indicate an update in NOA schedule
6173          * Bits 7-1 - Reserved
6174          */
6175         u8 changed;
6176         /* NOA index */
6177         u8 index;
6178         /* Bit 0 - Opp PS state of the AP
6179          * Bits 1-7 - Ctwindow in TUs
6180          */
6181         u8 ctwindow_oppps;
6182         /* Number of NOA descriptors */
6183         u8 num_descriptors;
6184
6185         struct wmi_p2p_noa_descriptor
6186                 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6187 } __packed;
6188
6189 struct wmi_10_4_bcn_info {
6190         struct wmi_10_4_tim_info tim_info;
6191         struct wmi_10_4_p2p_noa_info p2p_noa_info;
6192 } __packed;
6193
6194 struct wmi_10_4_host_swba_event {
6195         __le32 vdev_map;
6196         struct wmi_10_4_bcn_info bcn_info[];
6197 } __packed;
6198
6199 #define WMI_MAX_AP_VDEV 16
6200
6201 struct wmi_tbtt_offset_event {
6202         __le32 vdev_map;
6203         __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6204 } __packed;
6205
6206 struct wmi_peer_create_cmd {
6207         __le32 vdev_id;
6208         struct wmi_mac_addr peer_macaddr;
6209         __le32 peer_type;
6210 } __packed;
6211
6212 enum wmi_peer_type {
6213         WMI_PEER_TYPE_DEFAULT = 0,
6214         WMI_PEER_TYPE_BSS = 1,
6215         WMI_PEER_TYPE_TDLS = 2,
6216 };
6217
6218 struct wmi_peer_delete_cmd {
6219         __le32 vdev_id;
6220         struct wmi_mac_addr peer_macaddr;
6221 } __packed;
6222
6223 struct wmi_peer_flush_tids_cmd {
6224         __le32 vdev_id;
6225         struct wmi_mac_addr peer_macaddr;
6226         __le32 peer_tid_bitmap;
6227 } __packed;
6228
6229 struct wmi_fixed_rate {
6230         /*
6231          * rate mode . 0: disable fixed rate (auto rate)
6232          *   1: legacy (non 11n) rate  specified as ieee rate 2*Mbps
6233          *   2: ht20 11n rate  specified as mcs index
6234          *   3: ht40 11n rate  specified as mcs index
6235          */
6236         __le32  rate_mode;
6237         /*
6238          * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6239          * and series 3 is stored at byte 3 (MSB)
6240          */
6241         __le32  rate_series;
6242         /*
6243          * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6244          * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6245          * (MSB)
6246          */
6247         __le32  rate_retries;
6248 } __packed;
6249
6250 struct wmi_peer_fixed_rate_cmd {
6251         /* unique id identifying the VDEV, generated by the caller */
6252         __le32 vdev_id;
6253         /* peer MAC address */
6254         struct wmi_mac_addr peer_macaddr;
6255         /* fixed rate */
6256         struct wmi_fixed_rate peer_fixed_rate;
6257 } __packed;
6258
6259 #define WMI_MGMT_TID    17
6260
6261 struct wmi_addba_clear_resp_cmd {
6262         /* unique id identifying the VDEV, generated by the caller */
6263         __le32 vdev_id;
6264         /* peer MAC address */
6265         struct wmi_mac_addr peer_macaddr;
6266 } __packed;
6267
6268 struct wmi_addba_send_cmd {
6269         /* unique id identifying the VDEV, generated by the caller */
6270         __le32 vdev_id;
6271         /* peer MAC address */
6272         struct wmi_mac_addr peer_macaddr;
6273         /* Tid number */
6274         __le32 tid;
6275         /* Buffer/Window size*/
6276         __le32 buffersize;
6277 } __packed;
6278
6279 struct wmi_delba_send_cmd {
6280         /* unique id identifying the VDEV, generated by the caller */
6281         __le32 vdev_id;
6282         /* peer MAC address */
6283         struct wmi_mac_addr peer_macaddr;
6284         /* Tid number */
6285         __le32 tid;
6286         /* Is Initiator */
6287         __le32 initiator;
6288         /* Reason code */
6289         __le32 reasoncode;
6290 } __packed;
6291
6292 struct wmi_addba_setresponse_cmd {
6293         /* unique id identifying the vdev, generated by the caller */
6294         __le32 vdev_id;
6295         /* peer mac address */
6296         struct wmi_mac_addr peer_macaddr;
6297         /* Tid number */
6298         __le32 tid;
6299         /* status code */
6300         __le32 statuscode;
6301 } __packed;
6302
6303 struct wmi_send_singleamsdu_cmd {
6304         /* unique id identifying the vdev, generated by the caller */
6305         __le32 vdev_id;
6306         /* peer mac address */
6307         struct wmi_mac_addr peer_macaddr;
6308         /* Tid number */
6309         __le32 tid;
6310 } __packed;
6311
6312 enum wmi_peer_smps_state {
6313         WMI_PEER_SMPS_PS_NONE = 0x0,
6314         WMI_PEER_SMPS_STATIC  = 0x1,
6315         WMI_PEER_SMPS_DYNAMIC = 0x2
6316 };
6317
6318 enum wmi_peer_chwidth {
6319         WMI_PEER_CHWIDTH_20MHZ = 0,
6320         WMI_PEER_CHWIDTH_40MHZ = 1,
6321         WMI_PEER_CHWIDTH_80MHZ = 2,
6322         WMI_PEER_CHWIDTH_160MHZ = 3,
6323 };
6324
6325 enum wmi_peer_param {
6326         WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6327         WMI_PEER_AMPDU      = 0x2,
6328         WMI_PEER_AUTHORIZE  = 0x3,
6329         WMI_PEER_CHAN_WIDTH = 0x4,
6330         WMI_PEER_NSS        = 0x5,
6331         WMI_PEER_USE_4ADDR  = 0x6,
6332         WMI_PEER_USE_FIXED_PWR = 0x8,
6333         WMI_PEER_PARAM_FIXED_RATE = 0x9,
6334         WMI_PEER_DEBUG      = 0xa,
6335         WMI_PEER_PHYMODE    = 0xd,
6336         WMI_PEER_DUMMY_VAR  = 0xff, /* dummy parameter for STA PS workaround */
6337 };
6338
6339 struct wmi_peer_set_param_cmd {
6340         __le32 vdev_id;
6341         struct wmi_mac_addr peer_macaddr;
6342         __le32 param_id;
6343         __le32 param_value;
6344 } __packed;
6345
6346 #define MAX_SUPPORTED_RATES 128
6347
6348 struct wmi_rate_set {
6349         /* total number of rates */
6350         __le32 num_rates;
6351         /*
6352          * rates (each 8bit value) packed into a 32 bit word.
6353          * the rates are filled from least significant byte to most
6354          * significant byte.
6355          */
6356         __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6357 } __packed;
6358
6359 struct wmi_rate_set_arg {
6360         unsigned int num_rates;
6361         u8 rates[MAX_SUPPORTED_RATES];
6362 };
6363
6364 /*
6365  * NOTE: It would bea good idea to represent the Tx MCS
6366  * info in one word and Rx in another word. This is split
6367  * into multiple words for convenience
6368  */
6369 struct wmi_vht_rate_set {
6370         __le32 rx_max_rate; /* Max Rx data rate */
6371         __le32 rx_mcs_set;  /* Negotiated RX VHT rates */
6372         __le32 tx_max_rate; /* Max Tx data rate */
6373         __le32 tx_mcs_set;  /* Negotiated TX VHT rates */
6374 } __packed;
6375
6376 struct wmi_vht_rate_set_arg {
6377         u32 rx_max_rate;
6378         u32 rx_mcs_set;
6379         u32 tx_max_rate;
6380         u32 tx_mcs_set;
6381 };
6382
6383 struct wmi_peer_set_rates_cmd {
6384         /* peer MAC address */
6385         struct wmi_mac_addr peer_macaddr;
6386         /* legacy rate set */
6387         struct wmi_rate_set peer_legacy_rates;
6388         /* ht rate set */
6389         struct wmi_rate_set peer_ht_rates;
6390 } __packed;
6391
6392 struct wmi_peer_set_q_empty_callback_cmd {
6393         /* unique id identifying the VDEV, generated by the caller */
6394         __le32 vdev_id;
6395         /* peer MAC address */
6396         struct wmi_mac_addr peer_macaddr;
6397         __le32 callback_enable;
6398 } __packed;
6399
6400 struct wmi_peer_flags_map {
6401         u32 auth;
6402         u32 qos;
6403         u32 need_ptk_4_way;
6404         u32 need_gtk_2_way;
6405         u32 apsd;
6406         u32 ht;
6407         u32 bw40;
6408         u32 stbc;
6409         u32 ldbc;
6410         u32 dyn_mimops;
6411         u32 static_mimops;
6412         u32 spatial_mux;
6413         u32 vht;
6414         u32 bw80;
6415         u32 vht_2g;
6416         u32 pmf;
6417         u32 bw160;
6418 };
6419
6420 enum wmi_peer_flags {
6421         WMI_PEER_AUTH = 0x00000001,
6422         WMI_PEER_QOS = 0x00000002,
6423         WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6424         WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6425         WMI_PEER_APSD = 0x00000800,
6426         WMI_PEER_HT = 0x00001000,
6427         WMI_PEER_40MHZ = 0x00002000,
6428         WMI_PEER_STBC = 0x00008000,
6429         WMI_PEER_LDPC = 0x00010000,
6430         WMI_PEER_DYN_MIMOPS = 0x00020000,
6431         WMI_PEER_STATIC_MIMOPS = 0x00040000,
6432         WMI_PEER_SPATIAL_MUX = 0x00200000,
6433         WMI_PEER_VHT = 0x02000000,
6434         WMI_PEER_80MHZ = 0x04000000,
6435         WMI_PEER_VHT_2G = 0x08000000,
6436         WMI_PEER_PMF = 0x10000000,
6437         WMI_PEER_160MHZ = 0x20000000
6438 };
6439
6440 enum wmi_10x_peer_flags {
6441         WMI_10X_PEER_AUTH = 0x00000001,
6442         WMI_10X_PEER_QOS = 0x00000002,
6443         WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6444         WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6445         WMI_10X_PEER_APSD = 0x00000800,
6446         WMI_10X_PEER_HT = 0x00001000,
6447         WMI_10X_PEER_40MHZ = 0x00002000,
6448         WMI_10X_PEER_STBC = 0x00008000,
6449         WMI_10X_PEER_LDPC = 0x00010000,
6450         WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6451         WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6452         WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6453         WMI_10X_PEER_VHT = 0x02000000,
6454         WMI_10X_PEER_80MHZ = 0x04000000,
6455         WMI_10X_PEER_160MHZ = 0x20000000
6456 };
6457
6458 enum wmi_10_2_peer_flags {
6459         WMI_10_2_PEER_AUTH = 0x00000001,
6460         WMI_10_2_PEER_QOS = 0x00000002,
6461         WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6462         WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6463         WMI_10_2_PEER_APSD = 0x00000800,
6464         WMI_10_2_PEER_HT = 0x00001000,
6465         WMI_10_2_PEER_40MHZ = 0x00002000,
6466         WMI_10_2_PEER_STBC = 0x00008000,
6467         WMI_10_2_PEER_LDPC = 0x00010000,
6468         WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6469         WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6470         WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6471         WMI_10_2_PEER_VHT = 0x02000000,
6472         WMI_10_2_PEER_80MHZ = 0x04000000,
6473         WMI_10_2_PEER_VHT_2G = 0x08000000,
6474         WMI_10_2_PEER_PMF = 0x10000000,
6475         WMI_10_2_PEER_160MHZ = 0x20000000
6476 };
6477
6478 /*
6479  * Peer rate capabilities.
6480  *
6481  * This is of interest to the ratecontrol
6482  * module which resides in the firmware. The bit definitions are
6483  * consistent with that defined in if_athrate.c.
6484  */
6485 #define WMI_RC_DS_FLAG          0x01
6486 #define WMI_RC_CW40_FLAG        0x02
6487 #define WMI_RC_SGI_FLAG         0x04
6488 #define WMI_RC_HT_FLAG          0x08
6489 #define WMI_RC_RTSCTS_FLAG      0x10
6490 #define WMI_RC_TX_STBC_FLAG     0x20
6491 #define WMI_RC_RX_STBC_FLAG     0xC0
6492 #define WMI_RC_RX_STBC_FLAG_S   6
6493 #define WMI_RC_WEP_TKIP_FLAG    0x100
6494 #define WMI_RC_TS_FLAG          0x200
6495 #define WMI_RC_UAPSD_FLAG       0x400
6496
6497 /* Maximum listen interval supported by hw in units of beacon interval */
6498 #define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6499
6500 struct wmi_common_peer_assoc_complete_cmd {
6501         struct wmi_mac_addr peer_macaddr;
6502         __le32 vdev_id;
6503         __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6504         __le32 peer_associd; /* 16 LSBs */
6505         __le32 peer_flags;
6506         __le32 peer_caps; /* 16 LSBs */
6507         __le32 peer_listen_intval;
6508         __le32 peer_ht_caps;
6509         __le32 peer_max_mpdu;
6510         __le32 peer_mpdu_density; /* 0..16 */
6511         __le32 peer_rate_caps;
6512         struct wmi_rate_set peer_legacy_rates;
6513         struct wmi_rate_set peer_ht_rates;
6514         __le32 peer_nss; /* num of spatial streams */
6515         __le32 peer_vht_caps;
6516         __le32 peer_phymode;
6517         struct wmi_vht_rate_set peer_vht_rates;
6518 };
6519
6520 struct wmi_main_peer_assoc_complete_cmd {
6521         struct wmi_common_peer_assoc_complete_cmd cmd;
6522
6523         /* HT Operation Element of the peer. Five bytes packed in 2
6524          *  INT32 array and filled from lsb to msb.
6525          */
6526         __le32 peer_ht_info[2];
6527 } __packed;
6528
6529 struct wmi_10_1_peer_assoc_complete_cmd {
6530         struct wmi_common_peer_assoc_complete_cmd cmd;
6531 } __packed;
6532
6533 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6534 #define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6535 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6536 #define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6537
6538 struct wmi_10_2_peer_assoc_complete_cmd {
6539         struct wmi_common_peer_assoc_complete_cmd cmd;
6540         __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6541 } __packed;
6542
6543 /* NSS Mapping to FW */
6544 #define WMI_PEER_NSS_MAP_ENABLE BIT(31)
6545 #define WMI_PEER_NSS_160MHZ_MASK        GENMASK(2, 0)
6546 #define WMI_PEER_NSS_80_80MHZ_MASK      GENMASK(5, 3)
6547
6548 struct wmi_10_4_peer_assoc_complete_cmd {
6549         struct wmi_10_2_peer_assoc_complete_cmd cmd;
6550         __le32 peer_bw_rxnss_override;
6551 } __packed;
6552
6553 struct wmi_peer_assoc_complete_arg {
6554         u8 addr[ETH_ALEN];
6555         u32 vdev_id;
6556         bool peer_reassoc;
6557         u16 peer_aid;
6558         u32 peer_flags; /* see %WMI_PEER_ */
6559         u16 peer_caps;
6560         u32 peer_listen_intval;
6561         u32 peer_ht_caps;
6562         u32 peer_max_mpdu;
6563         u32 peer_mpdu_density; /* 0..16 */
6564         u32 peer_rate_caps; /* see %WMI_RC_ */
6565         struct wmi_rate_set_arg peer_legacy_rates;
6566         struct wmi_rate_set_arg peer_ht_rates;
6567         u32 peer_num_spatial_streams;
6568         u32 peer_vht_caps;
6569         enum wmi_phy_mode peer_phymode;
6570         struct wmi_vht_rate_set_arg peer_vht_rates;
6571         u32 peer_bw_rxnss_override;
6572 };
6573
6574 struct wmi_peer_add_wds_entry_cmd {
6575         /* peer MAC address */
6576         struct wmi_mac_addr peer_macaddr;
6577         /* wds MAC addr */
6578         struct wmi_mac_addr wds_macaddr;
6579 } __packed;
6580
6581 struct wmi_peer_remove_wds_entry_cmd {
6582         /* wds MAC addr */
6583         struct wmi_mac_addr wds_macaddr;
6584 } __packed;
6585
6586 struct wmi_peer_q_empty_callback_event {
6587         /* peer MAC address */
6588         struct wmi_mac_addr peer_macaddr;
6589 } __packed;
6590
6591 /*
6592  * Channel info WMI event
6593  */
6594 struct wmi_chan_info_event {
6595         __le32 err_code;
6596         __le32 freq;
6597         __le32 cmd_flags;
6598         __le32 noise_floor;
6599         __le32 rx_clear_count;
6600         __le32 cycle_count;
6601 } __packed;
6602
6603 struct wmi_10_4_chan_info_event {
6604         __le32 err_code;
6605         __le32 freq;
6606         __le32 cmd_flags;
6607         __le32 noise_floor;
6608         __le32 rx_clear_count;
6609         __le32 cycle_count;
6610         __le32 chan_tx_pwr_range;
6611         __le32 chan_tx_pwr_tp;
6612         __le32 rx_frame_count;
6613 } __packed;
6614
6615 struct wmi_peer_sta_kickout_event {
6616         struct wmi_mac_addr peer_macaddr;
6617 } __packed;
6618
6619 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6620 #define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6621
6622 /* Beacon filter wmi command info */
6623 #define BCN_FLT_MAX_SUPPORTED_IES       256
6624 #define BCN_FLT_MAX_ELEMS_IE_LIST       (BCN_FLT_MAX_SUPPORTED_IES / 32)
6625
6626 struct bss_bcn_stats {
6627         __le32 vdev_id;
6628         __le32 bss_bcnsdropped;
6629         __le32 bss_bcnsdelivered;
6630 } __packed;
6631
6632 struct bcn_filter_stats {
6633         __le32 bcns_dropped;
6634         __le32 bcns_delivered;
6635         __le32 activefilters;
6636         struct bss_bcn_stats bss_stats;
6637 } __packed;
6638
6639 struct wmi_add_bcn_filter_cmd {
6640         u32 vdev_id;
6641         u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6642 } __packed;
6643
6644 enum wmi_sta_keepalive_method {
6645         WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6646         WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6647 };
6648
6649 #define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6650
6651 /* Firmware crashes if keepalive interval exceeds this limit */
6652 #define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6653
6654 /* note: ip4 addresses are in network byte order, i.e. big endian */
6655 struct wmi_sta_keepalive_arp_resp {
6656         __be32 src_ip4_addr;
6657         __be32 dest_ip4_addr;
6658         struct wmi_mac_addr dest_mac_addr;
6659 } __packed;
6660
6661 struct wmi_sta_keepalive_cmd {
6662         __le32 vdev_id;
6663         __le32 enabled;
6664         __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6665         __le32 interval; /* in seconds */
6666         struct wmi_sta_keepalive_arp_resp arp_resp;
6667 } __packed;
6668
6669 struct wmi_sta_keepalive_arg {
6670         u32 vdev_id;
6671         u32 enabled;
6672         u32 method;
6673         u32 interval;
6674         __be32 src_ip4_addr;
6675         __be32 dest_ip4_addr;
6676         const u8 dest_mac_addr[ETH_ALEN];
6677 };
6678
6679 enum wmi_force_fw_hang_type {
6680         WMI_FORCE_FW_HANG_ASSERT = 1,
6681         WMI_FORCE_FW_HANG_NO_DETECT,
6682         WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6683         WMI_FORCE_FW_HANG_EMPTY_POINT,
6684         WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6685         WMI_FORCE_FW_HANG_INFINITE_LOOP,
6686 };
6687
6688 #define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6689
6690 struct wmi_force_fw_hang_cmd {
6691         __le32 type;
6692         __le32 delay_ms;
6693 } __packed;
6694
6695 enum wmi_pdev_reset_mode_type {
6696         WMI_RST_MODE_TX_FLUSH = 1,
6697         WMI_RST_MODE_WARM_RESET,
6698         WMI_RST_MODE_COLD_RESET,
6699         WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6700         WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6701         WMI_RST_MODE_MAX,
6702 };
6703
6704 enum ath10k_dbglog_level {
6705         ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6706         ATH10K_DBGLOG_LEVEL_INFO = 1,
6707         ATH10K_DBGLOG_LEVEL_WARN = 2,
6708         ATH10K_DBGLOG_LEVEL_ERR = 3,
6709 };
6710
6711 /* VAP ids to enable dbglog */
6712 #define ATH10K_DBGLOG_CFG_VAP_LOG_LSB           0
6713 #define ATH10K_DBGLOG_CFG_VAP_LOG_MASK          0x0000ffff
6714
6715 /* to enable dbglog in the firmware */
6716 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB  16
6717 #define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6718
6719 /* timestamp resolution */
6720 #define ATH10K_DBGLOG_CFG_RESOLUTION_LSB        17
6721 #define ATH10K_DBGLOG_CFG_RESOLUTION_MASK       0x000E0000
6722
6723 /* number of queued messages before sending them to the host */
6724 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB       20
6725 #define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK      0x0ff00000
6726
6727 /*
6728  * Log levels to enable. This defines the minimum level to enable, this is
6729  * not a bitmask. See enum ath10k_dbglog_level for the values.
6730  */
6731 #define ATH10K_DBGLOG_CFG_LOG_LVL_LSB           28
6732 #define ATH10K_DBGLOG_CFG_LOG_LVL_MASK          0x70000000
6733
6734 /*
6735  * Note: this is a cleaned up version of a struct firmware uses. For
6736  * example, config_valid was hidden inside an array.
6737  */
6738 struct wmi_dbglog_cfg_cmd {
6739         /* bitmask to hold mod id config*/
6740         __le32 module_enable;
6741
6742         /* see ATH10K_DBGLOG_CFG_ */
6743         __le32 config_enable;
6744
6745         /* mask of module id bits to be changed */
6746         __le32 module_valid;
6747
6748         /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6749         __le32 config_valid;
6750 } __packed;
6751
6752 struct wmi_10_4_dbglog_cfg_cmd {
6753         /* bitmask to hold mod id config*/
6754         __le64 module_enable;
6755
6756         /* see ATH10K_DBGLOG_CFG_ */
6757         __le32 config_enable;
6758
6759         /* mask of module id bits to be changed */
6760         __le64 module_valid;
6761
6762         /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6763         __le32 config_valid;
6764 } __packed;
6765
6766 enum wmi_roam_reason {
6767         WMI_ROAM_REASON_BETTER_AP = 1,
6768         WMI_ROAM_REASON_BEACON_MISS = 2,
6769         WMI_ROAM_REASON_LOW_RSSI = 3,
6770         WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6771         WMI_ROAM_REASON_HO_FAILED = 5,
6772
6773         /* keep last */
6774         WMI_ROAM_REASON_MAX,
6775 };
6776
6777 struct wmi_roam_ev {
6778         __le32 vdev_id;
6779         __le32 reason;
6780 } __packed;
6781
6782 #define ATH10K_FRAGMT_THRESHOLD_MIN     540
6783 #define ATH10K_FRAGMT_THRESHOLD_MAX     2346
6784
6785 #define WMI_MAX_EVENT 0x1000
6786 /* Maximum number of pending TXed WMI packets */
6787 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6788
6789 /* By default disable power save for IBSS */
6790 #define ATH10K_DEFAULT_ATIM 0
6791
6792 #define WMI_MAX_MEM_REQS 16
6793
6794 struct wmi_scan_ev_arg {
6795         __le32 event_type; /* %WMI_SCAN_EVENT_ */
6796         __le32 reason; /* %WMI_SCAN_REASON_ */
6797         __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6798         __le32 scan_req_id;
6799         __le32 scan_id;
6800         __le32 vdev_id;
6801 };
6802
6803 struct mgmt_tx_compl_params {
6804         u32 desc_id;
6805         u32 status;
6806         u32 ppdu_id;
6807         int ack_rssi;
6808 };
6809
6810 struct wmi_tlv_mgmt_tx_compl_ev_arg {
6811         __le32 desc_id;
6812         __le32 status;
6813         __le32 pdev_id;
6814         __le32 ppdu_id;
6815         __le32 ack_rssi;
6816 };
6817
6818 struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6819         __le32 num_reports;
6820         const __le32 *desc_ids;
6821         const __le32 *status;
6822         const __le32 *ppdu_ids;
6823         const __le32 *ack_rssi;
6824 };
6825
6826 struct wmi_peer_delete_resp_ev_arg {
6827         __le32 vdev_id;
6828         struct wmi_mac_addr peer_addr;
6829 };
6830
6831 #define WMI_MGMT_RX_NUM_RSSI 4
6832 struct wmi_mgmt_rx_ev_arg {
6833         __le32 channel;
6834         __le32 snr;
6835         __le32 rate;
6836         __le32 phy_mode;
6837         __le32 buf_len;
6838         __le32 status; /* %WMI_RX_STATUS_ */
6839         struct wmi_mgmt_rx_ext_info ext_info;
6840         __le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6841 };
6842
6843 struct wmi_ch_info_ev_arg {
6844         __le32 err_code;
6845         __le32 freq;
6846         __le32 cmd_flags;
6847         __le32 noise_floor;
6848         __le32 rx_clear_count;
6849         __le32 cycle_count;
6850         __le32 chan_tx_pwr_range;
6851         __le32 chan_tx_pwr_tp;
6852         __le32 rx_frame_count;
6853         __le32 my_bss_rx_cycle_count;
6854         __le32 rx_11b_mode_data_duration;
6855         __le32 tx_frame_cnt;
6856         __le32 mac_clk_mhz;
6857 };
6858
6859 /* From 10.4 firmware, not sure all have the same values. */
6860 enum wmi_vdev_start_status {
6861         WMI_VDEV_START_OK = 0,
6862         WMI_VDEV_START_CHAN_INVALID,
6863 };
6864
6865 struct wmi_vdev_start_ev_arg {
6866         __le32 vdev_id;
6867         __le32 req_id;
6868         __le32 resp_type; /* %WMI_VDEV_RESP_ */
6869         __le32 status; /* See wmi_vdev_start_status enum above */
6870 };
6871
6872 struct wmi_peer_kick_ev_arg {
6873         const u8 *mac_addr;
6874 };
6875
6876 struct wmi_swba_ev_arg {
6877         __le32 vdev_map;
6878         struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6879         const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6880 };
6881
6882 struct wmi_phyerr_ev_arg {
6883         u32 tsf_timestamp;
6884         u16 freq1;
6885         u16 freq2;
6886         u8 rssi_combined;
6887         u8 chan_width_mhz;
6888         u8 phy_err_code;
6889         u16 nf_chains[4];
6890         u32 buf_len;
6891         const u8 *buf;
6892         u8 hdr_len;
6893 };
6894
6895 struct wmi_phyerr_hdr_arg {
6896         u32 num_phyerrs;
6897         u32 tsf_l32;
6898         u32 tsf_u32;
6899         u32 buf_len;
6900         const void *phyerrs;
6901 };
6902
6903 struct wmi_dfs_status_ev_arg {
6904         u32 status;
6905 };
6906
6907 struct wmi_svc_rdy_ev_arg {
6908         __le32 min_tx_power;
6909         __le32 max_tx_power;
6910         __le32 ht_cap;
6911         __le32 vht_cap;
6912         __le32 vht_supp_mcs;
6913         __le32 sw_ver0;
6914         __le32 sw_ver1;
6915         __le32 fw_build;
6916         __le32 phy_capab;
6917         __le32 num_rf_chains;
6918         __le32 eeprom_rd;
6919         __le32 num_mem_reqs;
6920         __le32 low_2ghz_chan;
6921         __le32 high_2ghz_chan;
6922         __le32 low_5ghz_chan;
6923         __le32 high_5ghz_chan;
6924         __le32 sys_cap_info;
6925         const __le32 *service_map;
6926         size_t service_map_len;
6927         const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6928 };
6929
6930 struct wmi_svc_avail_ev_arg {
6931         bool service_map_ext_valid;
6932         __le32 service_map_ext_len;
6933         const __le32 *service_map_ext;
6934 };
6935
6936 struct wmi_rdy_ev_arg {
6937         __le32 sw_version;
6938         __le32 abi_version;
6939         __le32 status;
6940         const u8 *mac_addr;
6941 };
6942
6943 struct wmi_roam_ev_arg {
6944         __le32 vdev_id;
6945         __le32 reason;
6946         __le32 rssi;
6947 };
6948
6949 struct wmi_echo_ev_arg {
6950         __le32 value;
6951 };
6952
6953 struct wmi_pdev_temperature_event {
6954         /* temperature value in Celsius degree */
6955         __le32 temperature;
6956 } __packed;
6957
6958 struct wmi_pdev_bss_chan_info_event {
6959         __le32 freq;
6960         __le32 noise_floor;
6961         __le64 cycle_busy;
6962         __le64 cycle_total;
6963         __le64 cycle_tx;
6964         __le64 cycle_rx;
6965         __le64 cycle_rx_bss;
6966         __le32 reserved;
6967 } __packed;
6968
6969 /* WOW structures */
6970 enum wmi_wow_wakeup_event {
6971         WOW_BMISS_EVENT = 0,
6972         WOW_BETTER_AP_EVENT,
6973         WOW_DEAUTH_RECVD_EVENT,
6974         WOW_MAGIC_PKT_RECVD_EVENT,
6975         WOW_GTK_ERR_EVENT,
6976         WOW_FOURWAY_HSHAKE_EVENT,
6977         WOW_EAPOL_RECVD_EVENT,
6978         WOW_NLO_DETECTED_EVENT,
6979         WOW_DISASSOC_RECVD_EVENT,
6980         WOW_PATTERN_MATCH_EVENT,
6981         WOW_CSA_IE_EVENT,
6982         WOW_PROBE_REQ_WPS_IE_EVENT,
6983         WOW_AUTH_REQ_EVENT,
6984         WOW_ASSOC_REQ_EVENT,
6985         WOW_HTT_EVENT,
6986         WOW_RA_MATCH_EVENT,
6987         WOW_HOST_AUTO_SHUTDOWN_EVENT,
6988         WOW_IOAC_MAGIC_EVENT,
6989         WOW_IOAC_SHORT_EVENT,
6990         WOW_IOAC_EXTEND_EVENT,
6991         WOW_IOAC_TIMER_EVENT,
6992         WOW_DFS_PHYERR_RADAR_EVENT,
6993         WOW_BEACON_EVENT,
6994         WOW_CLIENT_KICKOUT_EVENT,
6995         WOW_EVENT_MAX,
6996 };
6997
6998 #define C2S(x) case x: return #x
6999
7000 static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
7001 {
7002         switch (ev) {
7003         C2S(WOW_BMISS_EVENT);
7004         C2S(WOW_BETTER_AP_EVENT);
7005         C2S(WOW_DEAUTH_RECVD_EVENT);
7006         C2S(WOW_MAGIC_PKT_RECVD_EVENT);
7007         C2S(WOW_GTK_ERR_EVENT);
7008         C2S(WOW_FOURWAY_HSHAKE_EVENT);
7009         C2S(WOW_EAPOL_RECVD_EVENT);
7010         C2S(WOW_NLO_DETECTED_EVENT);
7011         C2S(WOW_DISASSOC_RECVD_EVENT);
7012         C2S(WOW_PATTERN_MATCH_EVENT);
7013         C2S(WOW_CSA_IE_EVENT);
7014         C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
7015         C2S(WOW_AUTH_REQ_EVENT);
7016         C2S(WOW_ASSOC_REQ_EVENT);
7017         C2S(WOW_HTT_EVENT);
7018         C2S(WOW_RA_MATCH_EVENT);
7019         C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
7020         C2S(WOW_IOAC_MAGIC_EVENT);
7021         C2S(WOW_IOAC_SHORT_EVENT);
7022         C2S(WOW_IOAC_EXTEND_EVENT);
7023         C2S(WOW_IOAC_TIMER_EVENT);
7024         C2S(WOW_DFS_PHYERR_RADAR_EVENT);
7025         C2S(WOW_BEACON_EVENT);
7026         C2S(WOW_CLIENT_KICKOUT_EVENT);
7027         C2S(WOW_EVENT_MAX);
7028         default:
7029                 return NULL;
7030         }
7031 }
7032
7033 enum wmi_wow_wake_reason {
7034         WOW_REASON_UNSPECIFIED = -1,
7035         WOW_REASON_NLOD = 0,
7036         WOW_REASON_AP_ASSOC_LOST,
7037         WOW_REASON_LOW_RSSI,
7038         WOW_REASON_DEAUTH_RECVD,
7039         WOW_REASON_DISASSOC_RECVD,
7040         WOW_REASON_GTK_HS_ERR,
7041         WOW_REASON_EAP_REQ,
7042         WOW_REASON_FOURWAY_HS_RECV,
7043         WOW_REASON_TIMER_INTR_RECV,
7044         WOW_REASON_PATTERN_MATCH_FOUND,
7045         WOW_REASON_RECV_MAGIC_PATTERN,
7046         WOW_REASON_P2P_DISC,
7047         WOW_REASON_WLAN_HB,
7048         WOW_REASON_CSA_EVENT,
7049         WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7050         WOW_REASON_AUTH_REQ_RECV,
7051         WOW_REASON_ASSOC_REQ_RECV,
7052         WOW_REASON_HTT_EVENT,
7053         WOW_REASON_RA_MATCH,
7054         WOW_REASON_HOST_AUTO_SHUTDOWN,
7055         WOW_REASON_IOAC_MAGIC_EVENT,
7056         WOW_REASON_IOAC_SHORT_EVENT,
7057         WOW_REASON_IOAC_EXTEND_EVENT,
7058         WOW_REASON_IOAC_TIMER_EVENT,
7059         WOW_REASON_ROAM_HO,
7060         WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7061         WOW_REASON_BEACON_RECV,
7062         WOW_REASON_CLIENT_KICKOUT_EVENT,
7063         WOW_REASON_DEBUG_TEST = 0xFF,
7064 };
7065
7066 static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7067 {
7068         switch (reason) {
7069         C2S(WOW_REASON_UNSPECIFIED);
7070         C2S(WOW_REASON_NLOD);
7071         C2S(WOW_REASON_AP_ASSOC_LOST);
7072         C2S(WOW_REASON_LOW_RSSI);
7073         C2S(WOW_REASON_DEAUTH_RECVD);
7074         C2S(WOW_REASON_DISASSOC_RECVD);
7075         C2S(WOW_REASON_GTK_HS_ERR);
7076         C2S(WOW_REASON_EAP_REQ);
7077         C2S(WOW_REASON_FOURWAY_HS_RECV);
7078         C2S(WOW_REASON_TIMER_INTR_RECV);
7079         C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7080         C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7081         C2S(WOW_REASON_P2P_DISC);
7082         C2S(WOW_REASON_WLAN_HB);
7083         C2S(WOW_REASON_CSA_EVENT);
7084         C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7085         C2S(WOW_REASON_AUTH_REQ_RECV);
7086         C2S(WOW_REASON_ASSOC_REQ_RECV);
7087         C2S(WOW_REASON_HTT_EVENT);
7088         C2S(WOW_REASON_RA_MATCH);
7089         C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7090         C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7091         C2S(WOW_REASON_IOAC_SHORT_EVENT);
7092         C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7093         C2S(WOW_REASON_IOAC_TIMER_EVENT);
7094         C2S(WOW_REASON_ROAM_HO);
7095         C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7096         C2S(WOW_REASON_BEACON_RECV);
7097         C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7098         C2S(WOW_REASON_DEBUG_TEST);
7099         default:
7100                 return NULL;
7101         }
7102 }
7103
7104 #undef C2S
7105
7106 struct wmi_wow_ev_arg {
7107         u32 vdev_id;
7108         u32 flag;
7109         enum wmi_wow_wake_reason wake_reason;
7110         u32 data_len;
7111 };
7112
7113 #define WOW_MIN_PATTERN_SIZE    1
7114 #define WOW_MAX_PATTERN_SIZE    148
7115 #define WOW_MAX_PKT_OFFSET      128
7116 #define WOW_HDR_LEN     (sizeof(struct ieee80211_hdr_3addr) + \
7117         sizeof(struct rfc1042_hdr))
7118 #define WOW_MAX_REDUCE  (WOW_HDR_LEN - sizeof(struct ethhdr) - \
7119         offsetof(struct ieee80211_hdr_3addr, addr1))
7120
7121 enum wmi_tdls_state {
7122         WMI_TDLS_DISABLE,
7123         WMI_TDLS_ENABLE_PASSIVE,
7124         WMI_TDLS_ENABLE_ACTIVE,
7125         WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7126 };
7127
7128 enum wmi_tdls_peer_state {
7129         WMI_TDLS_PEER_STATE_PEERING,
7130         WMI_TDLS_PEER_STATE_CONNECTED,
7131         WMI_TDLS_PEER_STATE_TEARDOWN,
7132 };
7133
7134 struct wmi_tdls_peer_update_cmd_arg {
7135         u32 vdev_id;
7136         enum wmi_tdls_peer_state peer_state;
7137         u8 addr[ETH_ALEN];
7138 };
7139
7140 #define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7141
7142 #define WMI_TDLS_PEER_SP_MASK   0x60
7143 #define WMI_TDLS_PEER_SP_LSB    5
7144
7145 enum wmi_tdls_options {
7146         WMI_TDLS_OFFCHAN_EN = BIT(0),
7147         WMI_TDLS_BUFFER_STA_EN = BIT(1),
7148         WMI_TDLS_SLEEP_STA_EN = BIT(2),
7149 };
7150
7151 enum {
7152         WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7153         WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7154         WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7155         WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7156 };
7157
7158 struct wmi_tdls_peer_capab_arg {
7159         u8 peer_uapsd_queues;
7160         u8 peer_max_sp;
7161         u32 buff_sta_support;
7162         u32 off_chan_support;
7163         u32 peer_curr_operclass;
7164         u32 self_curr_operclass;
7165         u32 peer_chan_len;
7166         u32 peer_operclass_len;
7167         u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7168         u32 is_peer_responder;
7169         u32 pref_offchan_num;
7170         u32 pref_offchan_bw;
7171 };
7172
7173 struct wmi_10_4_tdls_set_state_cmd {
7174         __le32 vdev_id;
7175         __le32 state;
7176         __le32 notification_interval_ms;
7177         __le32 tx_discovery_threshold;
7178         __le32 tx_teardown_threshold;
7179         __le32 rssi_teardown_threshold;
7180         __le32 rssi_delta;
7181         __le32 tdls_options;
7182         __le32 tdls_peer_traffic_ind_window;
7183         __le32 tdls_peer_traffic_response_timeout_ms;
7184         __le32 tdls_puapsd_mask;
7185         __le32 tdls_puapsd_inactivity_time_ms;
7186         __le32 tdls_puapsd_rx_frame_threshold;
7187         __le32 teardown_notification_ms;
7188         __le32 tdls_peer_kickout_threshold;
7189 } __packed;
7190
7191 struct wmi_tdls_peer_capabilities {
7192         __le32 peer_qos;
7193         __le32 buff_sta_support;
7194         __le32 off_chan_support;
7195         __le32 peer_curr_operclass;
7196         __le32 self_curr_operclass;
7197         __le32 peer_chan_len;
7198         __le32 peer_operclass_len;
7199         u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7200         __le32 is_peer_responder;
7201         __le32 pref_offchan_num;
7202         __le32 pref_offchan_bw;
7203         union {
7204                 /* to match legacy implementation allocate room for
7205                  * at least one record even if peer_chan_len is 0
7206                  */
7207                 struct wmi_channel peer_chan_min_allocation;
7208                 DECLARE_FLEX_ARRAY(struct wmi_channel, peer_chan_list);
7209         };
7210 } __packed;
7211
7212 struct wmi_10_4_tdls_peer_update_cmd {
7213         __le32 vdev_id;
7214         struct wmi_mac_addr peer_macaddr;
7215         __le32 peer_state;
7216         __le32 reserved[4];
7217         struct wmi_tdls_peer_capabilities peer_capab;
7218 } __packed;
7219
7220 enum wmi_tdls_peer_reason {
7221         WMI_TDLS_TEARDOWN_REASON_TX,
7222         WMI_TDLS_TEARDOWN_REASON_RSSI,
7223         WMI_TDLS_TEARDOWN_REASON_SCAN,
7224         WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7225         WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7226         WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7227         WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7228         WMI_TDLS_ENTER_BUF_STA,
7229         WMI_TDLS_EXIT_BUF_STA,
7230         WMI_TDLS_ENTER_BT_BUSY_MODE,
7231         WMI_TDLS_EXIT_BT_BUSY_MODE,
7232         WMI_TDLS_SCAN_STARTED_EVENT,
7233         WMI_TDLS_SCAN_COMPLETED_EVENT,
7234 };
7235
7236 enum wmi_tdls_peer_notification {
7237         WMI_TDLS_SHOULD_DISCOVER,
7238         WMI_TDLS_SHOULD_TEARDOWN,
7239         WMI_TDLS_PEER_DISCONNECTED,
7240         WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7241 };
7242
7243 struct wmi_tdls_peer_event {
7244         struct wmi_mac_addr peer_macaddr;
7245         /* see enum wmi_tdls_peer_notification*/
7246         __le32 peer_status;
7247         /* see enum wmi_tdls_peer_reason */
7248         __le32 peer_reason;
7249         __le32 vdev_id;
7250 } __packed;
7251
7252 enum wmi_tid_aggr_control_conf {
7253         WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7254         WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7255         WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7256 };
7257
7258 enum wmi_noack_tid_conf {
7259         WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7260         WMI_PEER_TID_CONFIG_ACK,
7261         WMI_PEER_TID_CONFIG_NOACK,
7262 };
7263
7264 enum wmi_tid_rate_ctrl_conf {
7265         WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7266         WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7267         WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7268         WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7269         WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7270 };
7271
7272 enum wmi_tid_rtscts_control_conf {
7273         WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7274         WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7275 };
7276
7277 enum wmi_ext_tid_config_map {
7278         WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7279 };
7280
7281 struct wmi_per_peer_per_tid_cfg_arg {
7282         u32 vdev_id;
7283         struct wmi_mac_addr peer_macaddr;
7284         u32 tid;
7285         enum wmi_noack_tid_conf ack_policy;
7286         enum wmi_tid_aggr_control_conf aggr_control;
7287         u8 rate_ctrl;
7288         u32 retry_count;
7289         u32 rcode_flags;
7290         u32 ext_tid_cfg_bitmap;
7291         u32 rtscts_ctrl;
7292 };
7293
7294 struct wmi_peer_per_tid_cfg_cmd {
7295         __le32 vdev_id;
7296         struct wmi_mac_addr peer_macaddr;
7297         __le32 tid;
7298
7299         /* see enum wmi_noack_tid_conf */
7300         __le32 ack_policy;
7301
7302         /* see enum wmi_tid_aggr_control_conf */
7303         __le32 aggr_control;
7304
7305         /* see enum wmi_tid_rate_ctrl_conf */
7306         __le32 rate_control;
7307         __le32 rcode_flags;
7308         __le32 retry_count;
7309
7310         /* See enum wmi_ext_tid_config_map */
7311         __le32 ext_tid_cfg_bitmap;
7312
7313         /* see enum wmi_tid_rtscts_control_conf */
7314         __le32 rtscts_ctrl;
7315 } __packed;
7316
7317 enum wmi_txbf_conf {
7318         WMI_TXBF_CONF_UNSUPPORTED,
7319         WMI_TXBF_CONF_BEFORE_ASSOC,
7320         WMI_TXBF_CONF_AFTER_ASSOC,
7321 };
7322
7323 #define WMI_CCA_DETECT_LEVEL_AUTO       0
7324 #define WMI_CCA_DETECT_MARGIN_AUTO      0
7325
7326 struct wmi_pdev_set_adaptive_cca_params {
7327         __le32 enable;
7328         __le32 cca_detect_level;
7329         __le32 cca_detect_margin;
7330 } __packed;
7331
7332 #define WMI_PNO_MAX_SCHED_SCAN_PLANS      2
7333 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT   7200
7334 #define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7335 #define WMI_PNO_MAX_NETW_CHANNELS         26
7336 #define WMI_PNO_MAX_NETW_CHANNELS_EX      60
7337 #define WMI_PNO_MAX_SUPP_NETWORKS         WLAN_SCAN_PARAMS_MAX_SSID
7338 #define WMI_PNO_MAX_IE_LENGTH             WLAN_SCAN_PARAMS_MAX_IE_LEN
7339
7340 /*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7341 #define WMI_PNO_MAX_PB_REQ_SIZE    450
7342
7343 #define WMI_PNO_24G_DEFAULT_CH     1
7344 #define WMI_PNO_5G_DEFAULT_CH      36
7345
7346 #define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7347 #define WMI_PASSIVE_MAX_CHANNEL_TIME   110
7348
7349 /* SSID broadcast type */
7350 enum wmi_SSID_bcast_type {
7351         BCAST_UNKNOWN      = 0,
7352         BCAST_NORMAL       = 1,
7353         BCAST_HIDDEN       = 2,
7354 };
7355
7356 struct wmi_network_type {
7357         struct wmi_ssid ssid;
7358         u32 authentication;
7359         u32 encryption;
7360         u32 bcast_nw_type;
7361         u8 channel_count;
7362         u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7363         s32 rssi_threshold;
7364 } __packed;
7365
7366 struct wmi_pno_scan_req {
7367         u8 enable;
7368         u8 vdev_id;
7369         u8 uc_networks_count;
7370         struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7371         u32 fast_scan_period;
7372         u32 slow_scan_period;
7373         u8 fast_scan_max_cycles;
7374
7375         bool do_passive_scan;
7376
7377         u32 delay_start_time;
7378         u32 active_min_time;
7379         u32 active_max_time;
7380         u32 passive_min_time;
7381         u32 passive_max_time;
7382
7383         /* mac address randomization attributes */
7384         u32 enable_pno_scan_randomization;
7385         u8 mac_addr[ETH_ALEN];
7386         u8 mac_addr_mask[ETH_ALEN];
7387 } __packed;
7388
7389 enum wmi_host_platform_type {
7390         WMI_HOST_PLATFORM_HIGH_PERF,
7391         WMI_HOST_PLATFORM_LOW_PERF,
7392 };
7393
7394 enum wmi_bss_survey_req_type {
7395         WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7396         WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7397 };
7398
7399 struct wmi_pdev_chan_info_req_cmd {
7400         __le32 type;
7401         __le32 reserved;
7402 } __packed;
7403
7404 /* bb timing register configurations */
7405 struct wmi_bb_timing_cfg_arg {
7406         /* Tx_end to pa off timing */
7407         u32 bb_tx_timing;
7408
7409         /* Tx_end to external pa off timing */
7410         u32 bb_xpa_timing;
7411 };
7412
7413 struct wmi_pdev_bb_timing_cfg_cmd {
7414         /* Tx_end to pa off timing */
7415         __le32 bb_tx_timing;
7416
7417         /* Tx_end to external pa off timing */
7418         __le32 bb_xpa_timing;
7419 } __packed;
7420
7421 struct ath10k;
7422 struct ath10k_vif;
7423 struct ath10k_fw_stats_pdev;
7424 struct ath10k_fw_stats_peer;
7425 struct ath10k_fw_stats;
7426
7427 int ath10k_wmi_attach(struct ath10k *ar);
7428 void ath10k_wmi_detach(struct ath10k *ar);
7429 void ath10k_wmi_free_host_mem(struct ath10k *ar);
7430 int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7431 int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7432
7433 struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7434 int ath10k_wmi_connect(struct ath10k *ar);
7435
7436 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7437 int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7438                                u32 cmd_id);
7439 void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7440
7441 void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7442                                      struct ath10k_fw_stats_pdev *dst);
7443 void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7444                                    struct ath10k_fw_stats_pdev *dst);
7445 void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7446                                    struct ath10k_fw_stats_pdev *dst);
7447 void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7448                                       struct ath10k_fw_stats_pdev *dst);
7449 void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7450                                 struct ath10k_fw_stats_peer *dst);
7451 void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7452                                     struct wmi_host_mem_chunks *chunks);
7453 void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7454                                       const struct wmi_start_scan_arg *arg);
7455 void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7456                               const struct wmi_wmm_params_arg *arg);
7457 void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7458                                 const struct wmi_channel_arg *arg);
7459 int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7460
7461 int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7462 int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7463 int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7464 int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7465 void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7466 void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7467 int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7468 void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7469 void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7470 void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7471 void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7472 void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7473 void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7474 void ath10k_wmi_event_dfs(struct ath10k *ar,
7475                           struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7476 void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7477                                     struct wmi_phyerr_ev_arg *phyerr,
7478                                     u64 tsf);
7479 void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7480 void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7481 void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7482 void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7483 void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7484 void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7485 void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7486                                              struct sk_buff *skb);
7487 void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7488                                              struct sk_buff *skb);
7489 void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7490 void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7491 void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7492 void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7493 void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7494 void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7495                                          struct sk_buff *skb);
7496 void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7497 void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7498 void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7499 void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7500                                                 struct sk_buff *skb);
7501 void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7502 void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7503 void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7504 void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7505 int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7506 void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7507 int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7508                                  int left_len, struct wmi_phyerr_ev_arg *arg);
7509 void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7510                                       struct ath10k_fw_stats *fw_stats,
7511                                       char *buf);
7512 void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7513                                      struct ath10k_fw_stats *fw_stats,
7514                                      char *buf);
7515 void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7516                                       struct ath10k_fw_stats *fw_stats,
7517                                       char *buf);
7518 int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7519                                    enum wmi_vdev_subtype subtype);
7520 int ath10k_wmi_barrier(struct ath10k *ar);
7521 void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7522                                          u32 num_tx_chain);
7523 void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7524
7525 #endif /* _WMI_H_ */