include/configs/vf610twr.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale Vybrid vf610twr board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #define CONFIG_SYS_CACHELINE_SIZE       32
  13
  14 #include <asm/arch/imx-regs.h>
  15
  16 #define CONFIG_VF610
  17
  18 #define CONFIG_DISPLAY_CPUINFO
  19 #define CONFIG_DISPLAY_BOARDINFO
  20 #define CONFIG_SYS_FSL_CLK
  21
  22 #define CONFIG_MACH_TYPE                4146
  23
  24 #define CONFIG_SKIP_LOWLEVEL_INIT
  25
  26 /* Enable passing of ATAGs */
  27 #define CONFIG_CMDLINE_TAG
  28
  29 #define CONFIG_CMD_FUSE
  30 #ifdef CONFIG_CMD_FUSE
  31 #define CONFIG_MXC_OCOTP
  32 #endif
  33
  34 /* Size of malloc() pool */
  35 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  36
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38
  39 /* Allow to overwrite serial and ethaddr */
  40 #define CONFIG_ENV_OVERWRITE
  41 #define CONFIG_BAUDRATE                 115200
  42
  43 /* NAND support */
  44 #define CONFIG_CMD_NAND
  45 #define CONFIG_CMD_NAND_TRIMFFS
  46 #define CONFIG_SYS_NAND_ONFI_DETECTION
  47
  48 #ifdef CONFIG_CMD_NAND
  49 #define CONFIG_USE_ARCH_MEMCPY
  50 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  51 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  52
  53 /* UBI */
  54 #define CONFIG_CMD_UBI
  55 #define CONFIG_CMD_UBIFS
  56 #define CONFIG_RBTREE
  57 #define CONFIG_LZO
  58
  59 /* Dynamic MTD partition support */
  60 #define CONFIG_CMD_MTDPARTS
  61 #define CONFIG_MTD_PARTITIONS
  62 #define CONFIG_MTD_DEVICE
  63 #define MTDIDS_DEFAULT                  "nand0=fsl_nfc"
  64 #define MTDPARTS_DEFAULT                "mtdparts=fsl_nfc:"             \
  65                                         "128k(vf-bcb)ro,"               \
  66                                         "1408k(u-boot)ro,"              \
  67                                         "512k(u-boot-env),"             \
  68                                         "4m(kernel),"                   \
  69                                         "512k(fdt),"            \
  70                                         "-(rootfs)"
  71 #endif
  72
  73 #define CONFIG_MMC
  74 #define CONFIG_FSL_ESDHC
  75 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  76 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  77
  78 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  79
  80 #define CONFIG_CMD_MMC
  81 #define CONFIG_GENERIC_MMC
  82 #define CONFIG_CMD_FAT
  83 #define CONFIG_DOS_PARTITION
  84
  85 #define CONFIG_CMD_PING
  86 #define CONFIG_CMD_DHCP
  87 #define CONFIG_CMD_MII
  88 #define CONFIG_FEC_MXC
  89 #define CONFIG_MII
  90 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  91 #define CONFIG_FEC_XCV_TYPE             RMII
  92 #define CONFIG_FEC_MXC_PHYADDR          0
  93 #define CONFIG_PHYLIB
  94 #define CONFIG_PHY_MICREL
  95
  96 /* QSPI Configs*/
  97
  98 #ifdef CONFIG_FSL_QSPI
  99 #define CONFIG_CMD_SF
 100 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 101 #define FSL_QSPI_FLASH_NUM              2
 102 #define CONFIG_SYS_FSL_QSPI_LE
 103 #endif
 104
 105 /* I2C Configs */
 106 #define CONFIG_CMD_I2C
 107 #define CONFIG_SYS_I2C
 108 #define CONFIG_SYS_I2C_MXC
 109 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 110 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 111 #define CONFIG_SYS_SPD_BUS_NUM          0
 112
 113 #define CONFIG_BOOTDELAY                3
 114
 115 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 116
 117 /* We boot from the gfxRAM area of the OCRAM. */
 118 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 119 #define CONFIG_BOARD_SIZE_LIMIT         524288
 120
 121 /*
 122  * We do have 128MB of memory on the Vybrid Tower board. Leave the last
 123  * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
 124  * DDR3. Hence, limit the memory range for image processing to 112MB
 125  * using bootm_size. All of the following must be within this range.
 126  * We have the default load at 32MB into DDR (for the kernel), FDT at
 127  * 64MB and the ramdisk 512KB above that (allowing for hopefully never
 128  * seen large trees). This allows a reasonable split between ramdisk
 129  * and kernel size, where the ram disk can be a bit larger.
 130  */
 131 #define MEM_LAYOUT_ENV_SETTINGS \
 132         "bootm_size=0x07000000\0" \
 133         "loadaddr=0x82000000\0" \
 134         "kernel_addr_r=0x82000000\0" \
 135         "fdt_addr=0x84000000\0" \
 136         "fdt_addr_r=0x84000000\0" \
 137         "rdaddr=0x84080000\0" \
 138         "ramdisk_addr_r=0x84080000\0"
 139
 140 #define CONFIG_EXTRA_ENV_SETTINGS \
 141         MEM_LAYOUT_ENV_SETTINGS \
 142         "script=boot.scr\0" \
 143         "image=zImage\0" \
 144         "console=ttyLP1\0" \
 145         "fdt_file=vf610-twr.dtb\0" \
 146         "boot_fdt=try\0" \
 147         "ip_dyn=yes\0" \
 148         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 149         "mmcpart=1\0" \
 150         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 151         "update_sd_firmware_filename=u-boot.imx\0" \
 152         "update_sd_firmware=" \
 153                 "if test ${ip_dyn} = yes; then " \
 154                         "setenv get_cmd dhcp; " \
 155                 "else " \
 156                         "setenv get_cmd tftp; " \
 157                 "fi; " \
 158                 "if mmc dev ${mmcdev}; then "   \
 159                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 160                                 "setexpr fw_sz ${filesize} / 0x200; " \
 161                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 162                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 163                         "fi; "  \
 164                 "fi\0" \
 165         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 166                 "root=${mmcroot}\0" \
 167         "loadbootscript=" \
 168                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 169         "bootscript=echo Running bootscript from mmc ...; " \
 170                 "source\0" \
 171         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 172         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 173         "mmcboot=echo Booting from mmc ...; " \
 174                 "run mmcargs; " \
 175                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 176                         "if run loadfdt; then " \
 177                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 178                         "else " \
 179                                 "if test ${boot_fdt} = try; then " \
 180                                         "bootz; " \
 181                                 "else " \
 182                                         "echo WARN: Cannot load the DT; " \
 183                                 "fi; " \
 184                         "fi; " \
 185                 "else " \
 186                         "bootz; " \
 187                 "fi;\0" \
 188         "netargs=setenv bootargs console=${console},${baudrate} " \
 189                 "root=/dev/nfs " \
 190         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 191                 "netboot=echo Booting from net ...; " \
 192                 "run netargs; " \
 193                 "if test ${ip_dyn} = yes; then " \
 194                         "setenv get_cmd dhcp; " \
 195                 "else " \
 196                         "setenv get_cmd tftp; " \
 197                 "fi; " \
 198                 "${get_cmd} ${image}; " \
 199                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 200                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 201                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 202                         "else " \
 203                                 "if test ${boot_fdt} = try; then " \
 204                                         "bootz; " \
 205                                 "else " \
 206                                         "echo WARN: Cannot load the DT; " \
 207                                 "fi; " \
 208                         "fi; " \
 209                 "else " \
 210                         "bootz; " \
 211                 "fi;\0"
 212
 213 #define CONFIG_BOOTCOMMAND \
 214            "mmc dev ${mmcdev}; if mmc rescan; then " \
 215                    "if run loadbootscript; then " \
 216                            "run bootscript; " \
 217                    "else " \
 218                            "if run loadimage; then " \
 219                                    "run mmcboot; " \
 220                            "else run netboot; " \
 221                            "fi; " \
 222                    "fi; " \
 223            "else run netboot; fi"
 224
 225 /* Miscellaneous configurable options */
 226 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 227 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 228 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 229 #undef CONFIG_AUTO_COMPLETE
 230 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 231 #define CONFIG_SYS_PBSIZE               \
 232                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 233 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 234 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 235
 236 #define CONFIG_CMD_MEMTEST
 237 #define CONFIG_SYS_MEMTEST_START        0x80010000
 238 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 239
 240 /*
 241  * Stack sizes
 242  * The stack sizes are set up in start.S using the settings below
 243  */
 244 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 245
 246 /* Physical memory map */
 247 #define CONFIG_NR_DRAM_BANKS            1
 248 #define PHYS_SDRAM                      (0x80000000)
 249 #define PHYS_SDRAM_SIZE                 (128 * 1024 * 1024)
 250
 251 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 252 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 253 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 254
 255 #define CONFIG_SYS_INIT_SP_OFFSET \
 256         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 257 #define CONFIG_SYS_INIT_SP_ADDR \
 258         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 259
 260 /* FLASH and environment organization */
 261 #define CONFIG_SYS_NO_FLASH
 262
 263 #ifdef CONFIG_ENV_IS_IN_MMC
 264 #define CONFIG_ENV_SIZE                 (8 * 1024)
 265
 266 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 267 #define CONFIG_SYS_MMC_ENV_DEV          0
 268 #endif
 269
 270 #ifdef CONFIG_ENV_IS_IN_NAND
 271 #define CONFIG_ENV_SIZE                 (64 * 2048)
 272 #define CONFIG_ENV_SECT_SIZE            (64 * 2048)
 273 #define CONFIG_ENV_RANGE                (512 * 1024)
 274 #define CONFIG_ENV_OFFSET               0x180000
 275 #endif
 276
 277 #define CONFIG_CMD_BOOTZ
 278
 279 #endif