dts/upstream/src/powerpc/fsl/p2041rdb.dts

   1 /*
   2  * P2041RDB Device Tree Source
   3  *
   4  * Copyright 2011 - 2015 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "p2041si-pre.dtsi"
  36
  37 / {
  38         model = "fsl,P2041RDB";
  39         compatible = "fsl,P2041RDB";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         aliases {
  45                 phy_rgmii_0 = &phy_rgmii_0;
  46                 phy_rgmii_1 = &phy_rgmii_1;
  47                 phy_sgmii_2 = &phy_sgmii_2;
  48                 phy_sgmii_3 = &phy_sgmii_3;
  49                 phy_sgmii_4 = &phy_sgmii_4;
  50                 phy_sgmii_1c = &phy_sgmii_1c;
  51                 phy_sgmii_1d = &phy_sgmii_1d;
  52                 phy_sgmii_1e = &phy_sgmii_1e;
  53                 phy_sgmii_1f = &phy_sgmii_1f;
  54                 phy_xgmii_2 = &phy_xgmii_2;
  55         };
  56
  57         memory {
  58                 device_type = "memory";
  59         };
  60
  61         reserved-memory {
  62                 #address-cells = <2>;
  63                 #size-cells = <2>;
  64                 ranges;
  65
  66                 bman_fbpr: bman-fbpr {
  67                         size = <0 0x1000000>;
  68                         alignment = <0 0x1000000>;
  69                 };
  70                 qman_fqd: qman-fqd {
  71                         size = <0 0x400000>;
  72                         alignment = <0 0x400000>;
  73                 };
  74                 qman_pfdr: qman-pfdr {
  75                         size = <0 0x2000000>;
  76                         alignment = <0 0x2000000>;
  77                 };
  78         };
  79
  80         dcsr: dcsr@f00000000 {
  81                 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
  82         };
  83
  84         bportals: bman-portals@ff4000000 {
  85                 ranges = <0x0 0xf 0xf4000000 0x200000>;
  86         };
  87
  88         qportals: qman-portals@ff4200000 {
  89                 ranges = <0x0 0xf 0xf4200000 0x200000>;
  90         };
  91
  92         soc: soc@ffe000000 {
  93                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  94                 reg = <0xf 0xfe000000 0 0x00001000>;
  95                 spi@110000 {
  96                         flash@0 {
  97                                 #address-cells = <1>;
  98                                 #size-cells = <1>;
  99                                 compatible = "spansion,s25sl12801", "jedec,spi-nor";
 100                                 reg = <0>;
 101                                 spi-max-frequency = <40000000>; /* input clock */
 102                                 partition@u-boot {
 103                                         label = "u-boot";
 104                                         reg = <0x00000000 0x00100000>;
 105                                         read-only;
 106                                 };
 107                                 partition@kernel {
 108                                         label = "kernel";
 109                                         reg = <0x00100000 0x00500000>;
 110                                         read-only;
 111                                 };
 112                                 partition@dtb {
 113                                         label = "dtb";
 114                                         reg = <0x00600000 0x00100000>;
 115                                         read-only;
 116                                 };
 117                                 partition@fs {
 118                                         label = "file system";
 119                                         reg = <0x00700000 0x00900000>;
 120                                 };
 121                         };
 122                 };
 123
 124                 i2c@118000 {
 125                         lm75b@48 {
 126                                 compatible = "nxp,lm75a";
 127                                 reg = <0x48>;
 128                         };
 129                         eeprom@50 {
 130                                 compatible = "atmel,24c256";
 131                                 reg = <0x50>;
 132                         };
 133                         rtc@68 {
 134                                 compatible = "pericom,pt7c4338";
 135                                 reg = <0x68>;
 136                         };
 137                         adt7461@4c {
 138                                 compatible = "adi,adt7461";
 139                                 reg = <0x4c>;
 140                         };
 141                 };
 142
 143                 i2c@118100 {
 144                         eeprom@50 {
 145                                 compatible = "atmel,24c256";
 146                                 reg = <0x50>;
 147                         };
 148                 };
 149
 150                 usb1: usb@211000 {
 151                         dr_mode = "host";
 152                 };
 153
 154                 fman@400000 {
 155                         ethernet@e0000 {
 156                                 phy-handle = <&phy_sgmii_2>;
 157                                 phy-connection-type = "sgmii";
 158                         };
 159
 160                         mdio@e1120 {
 161                                 phy_rgmii_0: ethernet-phy@0 {
 162                                         reg = <0x0>;
 163                                 };
 164
 165                                 phy_rgmii_1: ethernet-phy@1 {
 166                                         reg = <0x1>;
 167                                 };
 168
 169                                 phy_sgmii_2: ethernet-phy@2 {
 170                                         reg = <0x2>;
 171                                 };
 172
 173                                 phy_sgmii_3: ethernet-phy@3 {
 174                                         reg = <0x3>;
 175                                 };
 176
 177                                 phy_sgmii_4: ethernet-phy@4 {
 178                                         reg = <0x4>;
 179                                 };
 180
 181                                 phy_sgmii_1c: ethernet-phy@1c {
 182                                         reg = <0x1c>;
 183                                 };
 184
 185                                 phy_sgmii_1d: ethernet-phy@1d {
 186                                         reg = <0x1d>;
 187                                 };
 188
 189                                 phy_sgmii_1e: ethernet-phy@1e {
 190                                         reg = <0x1e>;
 191                                 };
 192
 193                                 phy_sgmii_1f: ethernet-phy@1f {
 194                                         reg = <0x1f>;
 195                                 };
 196                         };
 197
 198                         ethernet@e2000 {
 199                                 phy-handle = <&phy_sgmii_3>;
 200                                 phy-connection-type = "sgmii";
 201                         };
 202
 203                         ethernet@e4000 {
 204                                 phy-handle = <&phy_sgmii_4>;
 205                                 phy-connection-type = "sgmii";
 206                         };
 207
 208                         ethernet@e6000 {
 209                                 phy-handle = <&phy_rgmii_1>;
 210                                 phy-connection-type = "rgmii";
 211                         };
 212
 213                         ethernet@e8000 {
 214                                 phy-handle = <&phy_rgmii_0>;
 215                                 phy-connection-type = "rgmii";
 216                         };
 217
 218                         ethernet@f0000 {
 219                                 phy-handle = <&phy_xgmii_2>;
 220                                 phy-connection-type = "xgmii";
 221                         };
 222
 223                         mdio@f1000 {
 224                                 phy_xgmii_2: ethernet-phy@0 {
 225                                         compatible = "ethernet-phy-ieee802.3-c45";
 226                                         reg = <0x0>;
 227                                 };
 228                         };
 229                 };
 230         };
 231
 232         rio: rapidio@ffe0c0000 {
 233                 reg = <0xf 0xfe0c0000 0 0x11000>;
 234
 235                 port1 {
 236                         ranges = <0 0 0xc 0x20000000 0 0x10000000>;
 237                 };
 238                 port2 {
 239                         ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 240                 };
 241         };
 242
 243         lbc: localbus@ffe124000 {
 244                 reg = <0xf 0xfe124000 0 0x1000>;
 245                 ranges = <0 0 0xf 0xe8000000 0x08000000
 246                           1 0 0xf 0xffa00000 0x00040000>;
 247
 248                 flash@0,0 {
 249                         compatible = "cfi-flash";
 250                         reg = <0 0 0x08000000>;
 251                         bank-width = <2>;
 252                         device-width = <2>;
 253                 };
 254
 255                 nand@1,0 {
 256                         #address-cells = <1>;
 257                         #size-cells = <1>;
 258                         compatible = "fsl,elbc-fcm-nand";
 259                         reg = <0x1 0x0 0x40000>;
 260
 261                         partition@0 {
 262                                 label = "NAND U-Boot Image";
 263                                 reg = <0x0 0x02000000>;
 264                                 read-only;
 265                         };
 266
 267                         partition@2000000 {
 268                                 label = "NAND Root File System";
 269                                 reg = <0x02000000 0x10000000>;
 270                         };
 271
 272                         partition@12000000 {
 273                                 label = "NAND Compressed RFS Image";
 274                                 reg = <0x12000000 0x08000000>;
 275                         };
 276
 277                         partition@1a000000 {
 278                                 label = "NAND Linux Kernel Image";
 279                                 reg = <0x1a000000 0x04000000>;
 280                         };
 281
 282                         partition@1e000000 {
 283                                 label = "NAND DTB Image";
 284                                 reg = <0x1e000000 0x01000000>;
 285                         };
 286
 287                         partition@1f000000 {
 288                                 label = "NAND Writable User area";
 289                                 reg = <0x1f000000 0x01000000>;
 290                         };
 291                 };
 292         };
 293
 294         pci0: pcie@ffe200000 {
 295                 reg = <0xf 0xfe200000 0 0x1000>;
 296                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 297                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 298                 pcie@0 {
 299                         ranges = <0x02000000 0 0xe0000000
 300                                   0x02000000 0 0xe0000000
 301                                   0 0x20000000
 302
 303                                   0x01000000 0 0x00000000
 304                                   0x01000000 0 0x00000000
 305                                   0 0x00010000>;
 306                 };
 307         };
 308
 309         pci1: pcie@ffe201000 {
 310                 reg = <0xf 0xfe201000 0 0x1000>;
 311                 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 312                           0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 313                 pcie@0 {
 314                         ranges = <0x02000000 0 0xe0000000
 315                                   0x02000000 0 0xe0000000
 316                                   0 0x20000000
 317
 318                                   0x01000000 0 0x00000000
 319                                   0x01000000 0 0x00000000
 320                                   0 0x00010000>;
 321                 };
 322         };
 323
 324         pci2: pcie@ffe202000 {
 325                 reg = <0xf 0xfe202000 0 0x1000>;
 326                 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 327                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 328                 pcie@0 {
 329                         ranges = <0x02000000 0 0xe0000000
 330                                   0x02000000 0 0xe0000000
 331                                   0 0x20000000
 332
 333                                   0x01000000 0 0x00000000
 334                                   0x01000000 0 0x00000000
 335                                   0 0x00010000>;
 336                 };
 337         };
 338 };
 339
 340 /include/ "p2041si-post.dtsi"