board/dhelectronics/dh_imx6/dh_imx6_spl.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * DHCOM DH-iMX6 PDK SPL support
   4  *
   5  * Copyright (C) 2017 Marek Vasut <[email protected]>
   6  */
   7
   8 #include <common.h>
   9 #include <asm/arch/clock.h>
  10 #include <asm/arch/crm_regs.h>
  11 #include <asm/arch/imx-regs.h>
  12 #include <asm/arch/iomux.h>
  13 #include <asm/arch/mx6-ddr.h>
  14 #include <asm/arch/mx6-pins.h>
  15 #include <asm/arch/sys_proto.h>
  16 #include <asm/gpio.h>
  17 #include <asm/mach-imx/boot_mode.h>
  18 #include <asm/mach-imx/iomux-v3.h>
  19 #include <asm/mach-imx/mxc_i2c.h>
  20 #include <asm/io.h>
  21 #include <errno.h>
  22 #include <fuse.h>
  23 #include <fsl_esdhc_imx.h>
  24 #include <i2c.h>
  25 #include <mmc.h>
  26 #include <spl.h>
  27
  28 #define ENET_PAD_CTRL                                                   \
  29         (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |  \
  30          PAD_CTL_HYS)
  31
  32 #define GPIO_PAD_CTRL                                                   \
  33         (PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm)
  34
  35 #define SPI_PAD_CTRL                                                    \
  36         (PAD_CTL_HYS | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |          \
  37         PAD_CTL_SRE_FAST)
  38
  39 #define UART_PAD_CTRL                                                   \
  40         (PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm |  \
  41          PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
  42
  43 #define USDHC_PAD_CTRL                                                  \
  44         (PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |   \
  45          PAD_CTL_SRE_FAST | PAD_CTL_HYS)
  46
  47 static const struct mx6dq_iomux_ddr_regs dhcom6dq_ddr_ioregs = {
  48         .dram_sdclk_0   = 0x00020030,
  49         .dram_sdclk_1   = 0x00020030,
  50         .dram_cas       = 0x00020030,
  51         .dram_ras       = 0x00020030,
  52         .dram_reset     = 0x00020030,
  53         .dram_sdcke0    = 0x00003000,
  54         .dram_sdcke1    = 0x00003000,
  55         .dram_sdba2     = 0x00000000,
  56         .dram_sdodt0    = 0x00003030,
  57         .dram_sdodt1    = 0x00003030,
  58         .dram_sdqs0     = 0x00000030,
  59         .dram_sdqs1     = 0x00000030,
  60         .dram_sdqs2     = 0x00000030,
  61         .dram_sdqs3     = 0x00000030,
  62         .dram_sdqs4     = 0x00000030,
  63         .dram_sdqs5     = 0x00000030,
  64         .dram_sdqs6     = 0x00000030,
  65         .dram_sdqs7     = 0x00000030,
  66         .dram_dqm0      = 0x00020030,
  67         .dram_dqm1      = 0x00020030,
  68         .dram_dqm2      = 0x00020030,
  69         .dram_dqm3      = 0x00020030,
  70         .dram_dqm4      = 0x00020030,
  71         .dram_dqm5      = 0x00020030,
  72         .dram_dqm6      = 0x00020030,
  73         .dram_dqm7      = 0x00020030,
  74 };
  75
  76 static const struct mx6dq_iomux_grp_regs dhcom6dq_grp_ioregs = {
  77         .grp_ddr_type   = 0x000C0000,
  78         .grp_ddrmode_ctl = 0x00020000,
  79         .grp_ddrpke     = 0x00000000,
  80         .grp_addds      = 0x00000030,
  81         .grp_ctlds      = 0x00000030,
  82         .grp_ddrmode    = 0x00020000,
  83         .grp_b0ds       = 0x00000030,
  84         .grp_b1ds       = 0x00000030,
  85         .grp_b2ds       = 0x00000030,
  86         .grp_b3ds       = 0x00000030,
  87         .grp_b4ds       = 0x00000030,
  88         .grp_b5ds       = 0x00000030,
  89         .grp_b6ds       = 0x00000030,
  90         .grp_b7ds       = 0x00000030,
  91 };
  92
  93 static const struct mx6sdl_iomux_ddr_regs dhcom6sdl_ddr_ioregs = {
  94         .dram_sdclk_0   = 0x00020030,
  95         .dram_sdclk_1   = 0x00020030,
  96         .dram_cas       = 0x00020030,
  97         .dram_ras       = 0x00020030,
  98         .dram_reset     = 0x00020030,
  99         .dram_sdcke0    = 0x00003000,
 100         .dram_sdcke1    = 0x00003000,
 101         .dram_sdba2     = 0x00000000,
 102         .dram_sdodt0    = 0x00003030,
 103         .dram_sdodt1    = 0x00003030,
 104         .dram_sdqs0     = 0x00000030,
 105         .dram_sdqs1     = 0x00000030,
 106         .dram_sdqs2     = 0x00000030,
 107         .dram_sdqs3     = 0x00000030,
 108         .dram_sdqs4     = 0x00000030,
 109         .dram_sdqs5     = 0x00000030,
 110         .dram_sdqs6     = 0x00000030,
 111         .dram_sdqs7     = 0x00000030,
 112         .dram_dqm0      = 0x00020030,
 113         .dram_dqm1      = 0x00020030,
 114         .dram_dqm2      = 0x00020030,
 115         .dram_dqm3      = 0x00020030,
 116         .dram_dqm4      = 0x00020030,
 117         .dram_dqm5      = 0x00020030,
 118         .dram_dqm6      = 0x00020030,
 119         .dram_dqm7      = 0x00020030,
 120 };
 121
 122 static const struct mx6sdl_iomux_grp_regs dhcom6sdl_grp_ioregs = {
 123         .grp_ddr_type   = 0x000C0000,
 124         .grp_ddrmode_ctl = 0x00020000,
 125         .grp_ddrpke     = 0x00000000,
 126         .grp_addds      = 0x00000030,
 127         .grp_ctlds      = 0x00000030,
 128         .grp_ddrmode    = 0x00020000,
 129         .grp_b0ds       = 0x00000030,
 130         .grp_b1ds       = 0x00000030,
 131         .grp_b2ds       = 0x00000030,
 132         .grp_b3ds       = 0x00000030,
 133         .grp_b4ds       = 0x00000030,
 134         .grp_b5ds       = 0x00000030,
 135         .grp_b6ds       = 0x00000030,
 136         .grp_b7ds       = 0x00000030,
 137 };
 138
 139 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x4g_1066 = {
 140         .p0_mpwldectrl0 = 0x00150019,
 141         .p0_mpwldectrl1 = 0x001C000B,
 142         .p1_mpwldectrl0 = 0x00020018,
 143         .p1_mpwldectrl1 = 0x0002000C,
 144         .p0_mpdgctrl0   = 0x43140320,
 145         .p0_mpdgctrl1   = 0x03080304,
 146         .p1_mpdgctrl0   = 0x43180320,
 147         .p1_mpdgctrl1   = 0x03100254,
 148         .p0_mprddlctl   = 0x4830383C,
 149         .p1_mprddlctl   = 0x3836323E,
 150         .p0_mpwrdlctl   = 0x3E444642,
 151         .p1_mpwrdlctl   = 0x42344442,
 152 };
 153
 154 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x4g_800 = {
 155         .p0_mpwldectrl0 = 0x0040003C,
 156         .p0_mpwldectrl1 = 0x0032003E,
 157         .p0_mpdgctrl0   = 0x42350231,
 158         .p0_mpdgctrl1   = 0x021A0218,
 159         .p0_mprddlctl   = 0x4B4B4E49,
 160         .p0_mpwrdlctl   = 0x3F3F3035,
 161 };
 162
 163 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_1066 = {
 164         .p0_mpwldectrl0 = 0x001a001a,
 165         .p0_mpwldectrl1 = 0x00260015,
 166         .p0_mpdgctrl0   = 0x030c0320,
 167         .p0_mpdgctrl1   = 0x03100304,
 168         .p0_mprddlctl   = 0x432e3538,
 169         .p0_mpwrdlctl   = 0x363f423d,
 170         .p1_mpwldectrl0 = 0x0006001e,
 171         .p1_mpwldectrl1 = 0x00050015,
 172         .p1_mpdgctrl0   = 0x031c0324,
 173         .p1_mpdgctrl1   = 0x030c0258,
 174         .p1_mprddlctl   = 0x3834313f,
 175         .p1_mpwrdlctl   = 0x47374a42,
 176 };
 177
 178 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_4x2g_800 = {
 179         .p0_mpwldectrl0 = 0x003A003A,
 180         .p0_mpwldectrl1 = 0x0030002F,
 181         .p1_mpwldectrl0 = 0x002F0038,
 182         .p1_mpwldectrl1 = 0x00270039,
 183         .p0_mpdgctrl0   = 0x420F020F,
 184         .p0_mpdgctrl1   = 0x01760175,
 185         .p1_mpdgctrl0   = 0x41640171,
 186         .p1_mpdgctrl1   = 0x015E0160,
 187         .p0_mprddlctl   = 0x45464B4A,
 188         .p1_mprddlctl   = 0x49484A46,
 189         .p0_mpwrdlctl   = 0x40402E32,
 190         .p1_mpwrdlctl   = 0x3A3A3231,
 191 };
 192
 193 static const struct mx6_mmdc_calibration dhcom_mmdc_calib_2x2g_800 = {
 194         .p0_mpwldectrl0 = 0x0040003C,
 195         .p0_mpwldectrl1 = 0x0032003E,
 196         .p0_mpdgctrl0   = 0x42350231,
 197         .p0_mpdgctrl1   = 0x021A0218,
 198         .p0_mprddlctl   = 0x4B4B4E49,
 199         .p0_mpwrdlctl   = 0x3F3F3035,
 200 };
 201
 202 /*
 203  * 2 Gbit DDR3 memory
 204  *   - NANYA #NT5CC128M16IP-DII
 205  *   - NANYA #NT5CB128M16FP-DII
 206  */
 207 static const struct mx6_ddr3_cfg dhcom_mem_ddr_2g = {
 208         .mem_speed      = 1600,
 209         .density        = 2,
 210         .width          = 16,
 211         .banks          = 8,
 212         .rowaddr        = 14,
 213         .coladdr        = 10,
 214         .pagesz         = 2,
 215         .trcd           = 1375,
 216         .trcmin         = 5863,
 217         .trasmin        = 3750,
 218 };
 219
 220 /*
 221  * 4 Gbit DDR3 memory
 222  *   - Intelligent Memory #IM4G16D3EABG-125I
 223  */
 224 static const struct mx6_ddr3_cfg dhcom_mem_ddr_4g = {
 225         .mem_speed      = 1600,
 226         .density        = 4,
 227         .width          = 16,
 228         .banks          = 8,
 229         .rowaddr        = 15,
 230         .coladdr        = 10,
 231         .pagesz         = 2,
 232         .trcd           = 1375,
 233         .trcmin         = 4875,
 234         .trasmin        = 3500,
 235 };
 236
 237 /* DDR3 64bit */
 238 static const struct mx6_ddr_sysinfo dhcom_ddr_64bit = {
 239         /* width of data bus:0=16,1=32,2=64 */
 240         .dsize          = 2,
 241         .cs_density     = 32,
 242         .ncs            = 1,    /* single chip select */
 243         .cs1_mirror     = 1,
 244         .rtt_wr         = 1,    /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
 245         .rtt_nom        = 1,    /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
 246         .walat          = 1,    /* Write additional latency */
 247         .ralat          = 5,    /* Read additional latency */
 248         .mif3_mode      = 3,    /* Command prediction working mode */
 249         .bi_on          = 1,    /* Bank interleaving enabled */
 250         .sde_to_rst     = 0x10, /* 14 cycles, 200us (JEDEC default) */
 251         .rst_to_cke     = 0x23, /* 33 cycles, 500us (JEDEC default) */
 252         .refsel         = 1,    /* Refresh cycles at 32KHz */
 253         .refr           = 3,    /* 4 refresh commands per refresh cycle */
 254 };
 255
 256 /* DDR3 32bit */
 257 static const struct mx6_ddr_sysinfo dhcom_ddr_32bit = {
 258         /* width of data bus:0=16,1=32,2=64 */
 259         .dsize          = 1,
 260         .cs_density     = 32,
 261         .ncs            = 1,    /* single chip select */
 262         .cs1_mirror     = 1,
 263         .rtt_wr         = 1,    /* DDR3_RTT_60_OHM, RTT_Wr = RZQ/4 */
 264         .rtt_nom        = 1,    /* DDR3_RTT_60_OHM, RTT_Nom = RZQ/4 */
 265         .walat          = 1,    /* Write additional latency */
 266         .ralat          = 5,    /* Read additional latency */
 267         .mif3_mode      = 3,    /* Command prediction working mode */
 268         .bi_on          = 1,    /* Bank interleaving enabled */
 269         .sde_to_rst     = 0x10, /* 14 cycles, 200us (JEDEC default) */
 270         .rst_to_cke     = 0x23, /* 33 cycles, 500us (JEDEC default) */
 271         .refsel         = 1,    /* Refresh cycles at 32KHz */
 272         .refr           = 3,    /* 4 refresh commands per refresh cycle */
 273 };
 274
 275 static void ccgr_init(void)
 276 {
 277         struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 278
 279         writel(0x00C03F3F, &ccm->CCGR0);
 280         writel(0x0030FC03, &ccm->CCGR1);
 281         writel(0x0FFFC000, &ccm->CCGR2);
 282         writel(0x3FF00000, &ccm->CCGR3);
 283         writel(0x00FFF300, &ccm->CCGR4);
 284         writel(0x0F0000C3, &ccm->CCGR5);
 285         writel(0x000003FF, &ccm->CCGR6);
 286 }
 287
 288 /* Board ID */
 289 static iomux_v3_cfg_t const hwcode_pads[] = {
 290         IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 291         IOMUX_PADS(PAD_EIM_A23__GPIO6_IO06      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 292         IOMUX_PADS(PAD_EIM_A22__GPIO2_IO16      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 293 };
 294
 295 static void setup_iomux_boardid(void)
 296 {
 297         /* HW code pins: Setup alternate function and configure pads */
 298         SETUP_IOMUX_PADS(hwcode_pads);
 299 }
 300
 301 /* DDR Code */
 302 static iomux_v3_cfg_t const ddrcode_pads[] = {
 303         IOMUX_PADS(PAD_EIM_A16__GPIO2_IO22      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 304         IOMUX_PADS(PAD_EIM_A17__GPIO2_IO21      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 305 };
 306
 307 static void setup_iomux_ddrcode(void)
 308 {
 309         /* ddr code pins */
 310         SETUP_IOMUX_PADS(ddrcode_pads);
 311 }
 312
 313 enum dhcom_ddr3_code {
 314         DH_DDR3_SIZE_256MIB = 0x00,
 315         DH_DDR3_SIZE_512MIB = 0x01,
 316         DH_DDR3_SIZE_1GIB   = 0x02,
 317         DH_DDR3_SIZE_2GIB   = 0x03
 318 };
 319
 320 #define DDR3_CODE_BIT_0   IMX_GPIO_NR(2, 22)
 321 #define DDR3_CODE_BIT_1   IMX_GPIO_NR(2, 21)
 322
 323 enum dhcom_ddr3_code dhcom_get_ddr3_code(void)
 324 {
 325         enum dhcom_ddr3_code ddr3_code;
 326
 327         gpio_request(DDR3_CODE_BIT_0, "DDR3_CODE_BIT_0");
 328         gpio_request(DDR3_CODE_BIT_1, "DDR3_CODE_BIT_1");
 329
 330         gpio_direction_input(DDR3_CODE_BIT_0);
 331         gpio_direction_input(DDR3_CODE_BIT_1);
 332
 333         /* 256MB = 0b00; 512MB = 0b01; 1GB = 0b10; 2GB = 0b11 */
 334         ddr3_code = (!!gpio_get_value(DDR3_CODE_BIT_1) << 1)
 335              | (!!gpio_get_value(DDR3_CODE_BIT_0));
 336
 337         return ddr3_code;
 338 }
 339
 340 /* GPIO */
 341 static iomux_v3_cfg_t const gpio_pads[] = {
 342         IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02       | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 343         IOMUX_PADS(PAD_GPIO_4__GPIO1_IO04       | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 344         IOMUX_PADS(PAD_GPIO_5__GPIO1_IO05       | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 345         IOMUX_PADS(PAD_CSI0_DAT17__GPIO6_IO03   | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 346         IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 347         IOMUX_PADS(PAD_DI0_PIN4__GPIO4_IO20     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 348         IOMUX_PADS(PAD_EIM_D27__GPIO3_IO27      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 349         IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 350         IOMUX_PADS(PAD_KEY_COL1__GPIO4_IO08     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 351         IOMUX_PADS(PAD_NANDF_CS1__GPIO6_IO14    | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 352         IOMUX_PADS(PAD_NANDF_CS2__GPIO6_IO15    | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 353         IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 354         IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 355         IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 356         IOMUX_PADS(PAD_CSI0_VSYNC__GPIO5_IO21   | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 357         IOMUX_PADS(PAD_GPIO_18__GPIO7_IO13      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 358         IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 359         IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 360         IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 361         IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19     | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 362         IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20      | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 363         IOMUX_PADS(PAD_CSI0_PIXCLK__GPIO5_IO18  | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 364         IOMUX_PADS(PAD_CSI0_MCLK__GPIO5_IO19    | MUX_PAD_CTRL(GPIO_PAD_CTRL)),
 365 };
 366
 367 static void setup_iomux_gpio(void)
 368 {
 369         SETUP_IOMUX_PADS(gpio_pads);
 370 }
 371
 372 /* Ethernet */
 373 static iomux_v3_cfg_t const enet_pads[] = {
 374         IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 375         IOMUX_PADS(PAD_ENET_MDC__ENET_MDC       | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 376         IOMUX_PADS(PAD_ENET_TX_EN__ENET_TX_EN   | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 377         IOMUX_PADS(PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 378         IOMUX_PADS(PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 379         IOMUX_PADS(PAD_GPIO_16__ENET_REF_CLK    | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 380         IOMUX_PADS(PAD_ENET_RX_ER__ENET_RX_ER   | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 381         IOMUX_PADS(PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 382         IOMUX_PADS(PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 383         IOMUX_PADS(PAD_ENET_CRS_DV__ENET_RX_EN  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
 384         /* SMSC PHY Reset */
 385         IOMUX_PADS(PAD_EIM_WAIT__GPIO5_IO00     | MUX_PAD_CTRL(NO_PAD_CTRL)),
 386         /* ENET_VIO_GPIO */
 387         IOMUX_PADS(PAD_GPIO_7__GPIO1_IO07       | MUX_PAD_CTRL(NO_PAD_CTRL)),
 388         /* ENET_Interrupt - (not used) */
 389         IOMUX_PADS(PAD_RGMII_RD0__GPIO6_IO25    | MUX_PAD_CTRL(NO_PAD_CTRL)),
 390 };
 391
 392 static void setup_iomux_enet(void)
 393 {
 394         SETUP_IOMUX_PADS(enet_pads);
 395 }
 396
 397 /* SD interface */
 398 static iomux_v3_cfg_t const usdhc2_pads[] = {
 399         IOMUX_PADS(PAD_SD2_DAT0__SD2_DATA0      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 400         IOMUX_PADS(PAD_SD2_DAT1__SD2_DATA1      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 401         IOMUX_PADS(PAD_SD2_DAT2__SD2_DATA2      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 402         IOMUX_PADS(PAD_SD2_DAT3__SD2_DATA3      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 403         IOMUX_PADS(PAD_SD2_CLK__SD2_CLK         | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 404         IOMUX_PADS(PAD_SD2_CMD__SD2_CMD         | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 405         IOMUX_PADS(PAD_NANDF_CS3__GPIO6_IO16    | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
 406 };
 407
 408 /* onboard microSD */
 409 static iomux_v3_cfg_t const usdhc3_pads[] = {
 410         IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 411         IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 412         IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 413         IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 414         IOMUX_PADS(PAD_SD3_CLK__SD3_CLK         | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 415         IOMUX_PADS(PAD_SD3_CMD__SD3_CMD         | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 416         IOMUX_PADS(PAD_SD3_RST__GPIO7_IO08      | MUX_PAD_CTRL(NO_PAD_CTRL)), /* CD */
 417 };
 418
 419 /* eMMC */
 420 static iomux_v3_cfg_t const usdhc4_pads[] = {
 421         IOMUX_PADS(PAD_SD4_DAT0__SD4_DATA0      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 422         IOMUX_PADS(PAD_SD4_DAT1__SD4_DATA1      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 423         IOMUX_PADS(PAD_SD4_DAT2__SD4_DATA2      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 424         IOMUX_PADS(PAD_SD4_DAT3__SD4_DATA3      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 425         IOMUX_PADS(PAD_SD4_DAT4__SD4_DATA4      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 426         IOMUX_PADS(PAD_SD4_DAT5__SD4_DATA5      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 427         IOMUX_PADS(PAD_SD4_DAT6__SD4_DATA6      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 428         IOMUX_PADS(PAD_SD4_DAT7__SD4_DATA7      | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 429         IOMUX_PADS(PAD_SD4_CLK__SD4_CLK         | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 430         IOMUX_PADS(PAD_SD4_CMD__SD4_CMD         | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 431 };
 432
 433 /* SD */
 434 static void setup_iomux_sd(void)
 435 {
 436         SETUP_IOMUX_PADS(usdhc2_pads);
 437         SETUP_IOMUX_PADS(usdhc3_pads);
 438         SETUP_IOMUX_PADS(usdhc4_pads);
 439 }
 440
 441 /* SPI */
 442 static iomux_v3_cfg_t const ecspi1_pads[] = {
 443         /* SS0 - SS of boot flash */
 444         IOMUX_PADS(PAD_EIM_EB2__GPIO2_IO30      |
 445                 MUX_PAD_CTRL(SPI_PAD_CTRL | PAD_CTL_PUS_100K_UP)),
 446         /* SS2 - SS of DHCOM SPI1 */
 447         IOMUX_PADS(PAD_KEY_ROW2__GPIO4_IO11     |
 448                 MUX_PAD_CTRL(SPI_PAD_CTRL | PAD_CTL_PUS_100K_UP)),
 449
 450         IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO     | MUX_PAD_CTRL(SPI_PAD_CTRL)),
 451         IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI     | MUX_PAD_CTRL(SPI_PAD_CTRL)),
 452         IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK     | MUX_PAD_CTRL(SPI_PAD_CTRL)),
 453 };
 454
 455 static void setup_iomux_spi(void)
 456 {
 457         SETUP_IOMUX_PADS(ecspi1_pads);
 458 }
 459
 460 int board_spi_cs_gpio(unsigned bus, unsigned cs)
 461 {
 462         if (bus == 0 && cs == 0)
 463                 return IMX_GPIO_NR(2, 30);
 464         else
 465                 return -1;
 466 }
 467
 468 /* UART */
 469 static iomux_v3_cfg_t const uart1_pads[] = {
 470         IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA  | MUX_PAD_CTRL(UART_PAD_CTRL)),
 471         IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA  | MUX_PAD_CTRL(UART_PAD_CTRL)),
 472 };
 473
 474 static void setup_iomux_uart(void)
 475 {
 476         SETUP_IOMUX_PADS(uart1_pads);
 477 }
 478
 479 #ifdef CONFIG_FSL_USDHC
 480 struct fsl_esdhc_cfg usdhc_cfg[1] = {
 481         {USDHC4_BASE_ADDR},
 482 };
 483
 484 int board_mmc_get_env_dev(int devno)
 485 {
 486         return devno - 1;
 487 }
 488
 489 int board_mmc_getcd(struct mmc *mmc)
 490 {
 491         return 1; /* eMMC/uSDHC4 is always present */
 492 }
 493
 494 int board_mmc_init(bd_t *bis)
 495 {
 496         SETUP_IOMUX_PADS(usdhc4_pads);
 497         usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
 498         usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
 499         usdhc_cfg[0].max_bus_width = 8;
 500
 501         return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
 502 }
 503 #endif
 504
 505 /* USB */
 506 static iomux_v3_cfg_t const usb_pads[] = {
 507         IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID       | MUX_PAD_CTRL(NO_PAD_CTRL)),
 508         IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31      | MUX_PAD_CTRL(NO_PAD_CTRL)),
 509 };
 510
 511 static void setup_iomux_usb(void)
 512 {
 513         SETUP_IOMUX_PADS(usb_pads);
 514 }
 515
 516 /* Perform DDR DRAM calibration */
 517 static int spl_dram_perform_cal(struct mx6_ddr_sysinfo const *sysinfo)
 518 {
 519         int ret = 0;
 520
 521 #ifdef CONFIG_MX6_DDRCAL
 522         udelay(100);
 523         ret = mmdc_do_write_level_calibration(sysinfo);
 524         if (ret) {
 525                 printf("DDR3: Write level calibration error [%d]\n", ret);
 526                 return ret;
 527         }
 528
 529         ret = mmdc_do_dqs_calibration(sysinfo);
 530         if (ret) {
 531                 printf("DDR3: DQS calibration error [%d]\n", ret);
 532                 return ret;
 533         }
 534 #endif /* CONFIG_MX6_DDRCAL */
 535
 536         return ret;
 537 }
 538
 539
 540 /* DRAM */
 541 static void dhcom_spl_dram_init(void)
 542 {
 543         enum dhcom_ddr3_code ddr3_code = dhcom_get_ddr3_code();
 544
 545         if (is_mx6dq()) {
 546                 mx6dq_dram_iocfg(64, &dhcom6dq_ddr_ioregs,
 547                                         &dhcom6dq_grp_ioregs);
 548                 switch (ddr3_code) {
 549                 default:
 550                         printf("imx6qd: unsupported ddr3 code %d\n", ddr3_code);
 551                         printf("        choosing 1024 MB\n");
 552                         /* fall through */
 553                 case DH_DDR3_SIZE_1GIB:
 554                         mx6_dram_cfg(&dhcom_ddr_64bit,
 555                                      &dhcom_mmdc_calib_4x2g_1066,
 556                                      &dhcom_mem_ddr_2g);
 557                         break;
 558                 case DH_DDR3_SIZE_2GIB:
 559                         mx6_dram_cfg(&dhcom_ddr_64bit,
 560                                      &dhcom_mmdc_calib_4x4g_1066,
 561                                      &dhcom_mem_ddr_4g);
 562                         break;
 563                 }
 564
 565                 /* Perform DDR DRAM calibration */
 566                 spl_dram_perform_cal(&dhcom_ddr_64bit);
 567
 568         } else if (is_cpu_type(MXC_CPU_MX6DL)) {
 569                 mx6sdl_dram_iocfg(64, &dhcom6sdl_ddr_ioregs,
 570                                           &dhcom6sdl_grp_ioregs);
 571                 switch (ddr3_code) {
 572                 default:
 573                         printf("imx6dl: unsupported ddr3 code %d\n", ddr3_code);
 574                         printf("        choosing 1024 MB\n");
 575                         /* fall through */
 576                 case DH_DDR3_SIZE_1GIB:
 577                         mx6_dram_cfg(&dhcom_ddr_64bit,
 578                                      &dhcom_mmdc_calib_4x2g_800,
 579                                      &dhcom_mem_ddr_2g);
 580                         break;
 581                 }
 582
 583                 /* Perform DDR DRAM calibration */
 584                 spl_dram_perform_cal(&dhcom_ddr_64bit);
 585
 586         } else if (is_cpu_type(MXC_CPU_MX6SOLO)) {
 587                 mx6sdl_dram_iocfg(32, &dhcom6sdl_ddr_ioregs,
 588                                           &dhcom6sdl_grp_ioregs);
 589                 switch (ddr3_code) {
 590                 default:
 591                         printf("imx6s: unsupported ddr3 code %d\n", ddr3_code);
 592                         printf("       choosing 512 MB\n");
 593                         /* fall through */
 594                 case DH_DDR3_SIZE_512MIB:
 595                         mx6_dram_cfg(&dhcom_ddr_32bit,
 596                                      &dhcom_mmdc_calib_2x2g_800,
 597                                      &dhcom_mem_ddr_2g);
 598                         break;
 599                 case DH_DDR3_SIZE_1GIB:
 600                         mx6_dram_cfg(&dhcom_ddr_32bit,
 601                                      &dhcom_mmdc_calib_2x4g_800,
 602                                      &dhcom_mem_ddr_4g);
 603                         break;
 604                 }
 605
 606                 /* Perform DDR DRAM calibration */
 607                 spl_dram_perform_cal(&dhcom_ddr_32bit);
 608         }
 609 }
 610
 611 void board_init_f(ulong dummy)
 612 {
 613         /* setup AIPS and disable watchdog */
 614         arch_cpu_init();
 615
 616         ccgr_init();
 617         gpr_init();
 618
 619         /* setup GP timer */
 620         timer_init();
 621
 622         setup_iomux_boardid();
 623         setup_iomux_ddrcode();
 624         setup_iomux_gpio();
 625         setup_iomux_enet();
 626         setup_iomux_sd();
 627         setup_iomux_spi();
 628         setup_iomux_uart();
 629         setup_iomux_usb();
 630
 631         /* UART clocks enabled and gd valid - init serial console */
 632         preloader_console_init();
 633
 634         /* DDR3 initialization */
 635         dhcom_spl_dram_init();
 636
 637         /* Clear the BSS. */
 638         memset(__bss_start, 0, __bss_end - __bss_start);
 639
 640         /* load/boot image from boot device */
 641         board_init_r(NULL, 0);
 642 }