include/configs/dns325.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011
   4  * Stefan Herbrechtsmeier <[email protected]>
   5  *
   6  * Based on Kirkwood support:
   7  * (C) Copyright 2009
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <[email protected]>
  10  */
  11
  12 #ifndef _CONFIG_DNS325_H
  13 #define _CONFIG_DNS325_H
  14
  15 /*
  16  * Machine number definition
  17  */
  18 #define CONFIG_MACH_TYPE                MACH_TYPE_DNS325
  19
  20 /*
  21  * High Level Configuration Options (easy to change)
  22  */
  23 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  24 #define CONFIG_KW88F6281                /* SOC Name */
  25 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  26
  27 /*
  28  * Commands configuration
  29  */
  30
  31 #define CONFIG_NR_DRAM_BANKS            1
  32
  33 /*
  34  * mv-common.h should be defined after CMD configs since it used them
  35  * to enable certain macros
  36  */
  37 #include "mv-common.h"
  38
  39 /* Remove or override few declarations from mv-common.h */
  40
  41 /*
  42  * Ethernet Driver configuration
  43  */
  44 #ifdef CONFIG_CMD_NET
  45 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  46 #define CONFIG_NETCONSOLE
  47 #endif
  48
  49 /*
  50  * SATA Driver configuration
  51  */
  52 #ifdef CONFIG_MVSATA_IDE
  53 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  54 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  55 #endif
  56
  57 /*
  58  * RTC driver configuration
  59  */
  60 #ifdef CONFIG_CMD_DATE
  61 #define CONFIG_RTC_MV
  62 #endif
  63
  64 /*
  65  * Enable GPI0 support
  66  */
  67 #define CONFIG_KIRKWOOD_GPIO
  68
  69 /*
  70  * Environment variables configurations
  71  */
  72 #ifdef CONFIG_CMD_NAND
  73 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128KB */
  74 #endif
  75
  76 #define CONFIG_ENV_SIZE                 0x20000 /* 128KB */
  77 #define CONFIG_ENV_ADDR                 0xe0000
  78 #define CONFIG_ENV_OFFSET               0xe0000 /* env starts here */
  79
  80 /*
  81  * Default environment variables
  82  */
  83
  84 #define CONFIG_EXTRA_ENV_SETTINGS \
  85         "stdin=serial\0" \
  86         "stdout=serial\0" \
  87         "stderr=serial\0" \
  88         "loadaddr=0x800000\0" \
  89         "autoload=no\0" \
  90         "console=ttyS0,115200\0" \
  91         "mtdparts="CONFIG_MTDPARTS_DEFAULT \
  92         "optargs=\0" \
  93         "bootenv=uEnv.txt\0" \
  94         "importbootenv=echo Importing environment ...; " \
  95                 "env import -t ${loadaddr} ${filesize}\0" \
  96         "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
  97         "setbootargs=setenv bootargs console=${console} " \
  98                 "${optargs} " \
  99                 "${mtdparts} " \
 100                 "root=${bootenvroot} " \
 101                 "rootfstype=${bootenvrootfstype}\0" \
 102         "subbootcmd=run setbootargs; " \
 103                 "if run bootenvloadimage; then " \
 104                         "bootm ${loadaddr};" \
 105                 "fi;\0" \
 106         "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
 107         "nandrootfstype=ubifs\0" \
 108         "nandloadimage=nand read ${loadaddr} kernel\0" \
 109         "setnandbootenv=echo Booting from nand ...; " \
 110                 "setenv bootenvroot ${nandroot}; " \
 111                 "setenv bootenvrootfstype ${nandrootfstype}; " \
 112                 "setenv bootenvloadimage ${nandloadimage}\0"
 113
 114 #define CONFIG_BOOTCOMMAND \
 115         "if test -n ${bootenv} && usb start; then " \
 116                 "if run loadbootenv; then " \
 117                         "echo Loaded environment ${bootenv} from usb;" \
 118                         "run importbootenv;" \
 119                 "fi;" \
 120                 "if test -n ${bootenvcmd}; then " \
 121                         "echo Running bootenvcmd ...;" \
 122                         "run bootenvcmd;" \
 123                 "fi;" \
 124         "fi;" \
 125         "run setnandbootenv subbootcmd;"
 126
 127 #endif /* _CONFIG_DNS325_H */