drivers/mmc/xenon_sdhci.c

   1 /*
   2  * Driver for Marvell SOC Platform Group Xenon SDHC as a platform device
   3  *
   4  * Copyright (C) 2016 Marvell, All Rights Reserved.
   5  *
   6  * Author:      Victor Gu <[email protected]>
   7  * Date:        2016-8-24
   8  *
   9  * Included parts of the Linux driver version which was written by:
  10  * Hu Ziji <[email protected]>
  11  *
  12  * Ported to from Marvell 2015.01 to mainline U-Boot 2017.01:
  13  * Stefan Roese <[email protected]>
  14  *
  15  * SPDX-License-Identifier:     GPL-2.0
  16  */
  17
  18 #include <common.h>
  19 #include <dm.h>
  20 #include <fdtdec.h>
  21 #include <libfdt.h>
  22 #include <malloc.h>
  23 #include <sdhci.h>
  24
  25 DECLARE_GLOBAL_DATA_PTR;
  26
  27 /* Register Offset of SD Host Controller SOCP self-defined register */
  28 #define SDHC_SYS_CFG_INFO                       0x0104
  29 #define SLOT_TYPE_SDIO_SHIFT                    24
  30 #define SLOT_TYPE_EMMC_MASK                     0xFF
  31 #define SLOT_TYPE_EMMC_SHIFT                    16
  32 #define SLOT_TYPE_SD_SDIO_MMC_MASK              0xFF
  33 #define SLOT_TYPE_SD_SDIO_MMC_SHIFT             8
  34 #define NR_SUPPORTED_SLOT_MASK                  0x7
  35
  36 #define SDHC_SYS_OP_CTRL                        0x0108
  37 #define AUTO_CLKGATE_DISABLE_MASK               BIT(20)
  38 #define SDCLK_IDLEOFF_ENABLE_SHIFT              8
  39 #define SLOT_ENABLE_SHIFT                       0
  40
  41 #define SDHC_SYS_EXT_OP_CTRL                    0x010C
  42 #define MASK_CMD_CONFLICT_ERROR                 BIT(8)
  43
  44 #define SDHC_SLOT_RETUNING_REQ_CTRL             0x0144
  45 /* retuning compatible */
  46 #define RETUNING_COMPATIBLE                     0x1
  47
  48 /* Xenon specific Mode Select value */
  49 #define XENON_SDHCI_CTRL_HS200                  0x5
  50 #define XENON_SDHCI_CTRL_HS400                  0x6
  51
  52 #define EMMC_PHY_REG_BASE                       0x170
  53 #define EMMC_PHY_TIMING_ADJUST                  EMMC_PHY_REG_BASE
  54 #define OUTPUT_QSN_PHASE_SELECT                 BIT(17)
  55 #define SAMPL_INV_QSP_PHASE_SELECT              BIT(18)
  56 #define SAMPL_INV_QSP_PHASE_SELECT_SHIFT        18
  57 #define EMMC_PHY_SLOW_MODE                      BIT(29)
  58 #define PHY_INITIALIZAION                       BIT(31)
  59 #define WAIT_CYCLE_BEFORE_USING_MASK            0xf
  60 #define WAIT_CYCLE_BEFORE_USING_SHIFT           12
  61 #define FC_SYNC_EN_DURATION_MASK                0xf
  62 #define FC_SYNC_EN_DURATION_SHIFT               8
  63 #define FC_SYNC_RST_EN_DURATION_MASK            0xf
  64 #define FC_SYNC_RST_EN_DURATION_SHIFT           4
  65 #define FC_SYNC_RST_DURATION_MASK               0xf
  66 #define FC_SYNC_RST_DURATION_SHIFT              0
  67
  68 #define EMMC_PHY_FUNC_CONTROL                   (EMMC_PHY_REG_BASE + 0x4)
  69 #define DQ_ASYNC_MODE                           BIT(4)
  70 #define DQ_DDR_MODE_SHIFT                       8
  71 #define DQ_DDR_MODE_MASK                        0xff
  72 #define CMD_DDR_MODE                            BIT(16)
  73
  74 #define EMMC_PHY_PAD_CONTROL                    (EMMC_PHY_REG_BASE + 0x8)
  75 #define REC_EN_SHIFT                            24
  76 #define REC_EN_MASK                             0xf
  77 #define FC_DQ_RECEN                             BIT(24)
  78 #define FC_CMD_RECEN                            BIT(25)
  79 #define FC_QSP_RECEN                            BIT(26)
  80 #define FC_QSN_RECEN                            BIT(27)
  81 #define OEN_QSN                                 BIT(28)
  82 #define AUTO_RECEN_CTRL                         BIT(30)
  83
  84 #define EMMC_PHY_PAD_CONTROL1                   (EMMC_PHY_REG_BASE + 0xc)
  85 #define EMMC5_1_FC_QSP_PD                       BIT(9)
  86 #define EMMC5_1_FC_QSP_PU                       BIT(25)
  87 #define EMMC5_1_FC_CMD_PD                       BIT(8)
  88 #define EMMC5_1_FC_CMD_PU                       BIT(24)
  89 #define EMMC5_1_FC_DQ_PD                        0xff
  90 #define EMMC5_1_FC_DQ_PU                        (0xff << 16)
  91
  92 #define SDHCI_RETUNE_EVT_INTSIG                 0x00001000
  93
  94 /* Hyperion only have one slot 0 */
  95 #define XENON_MMC_SLOT_ID_HYPERION              0
  96
  97 #define MMC_TIMING_LEGACY       0
  98 #define MMC_TIMING_MMC_HS       1
  99 #define MMC_TIMING_SD_HS        2
 100 #define MMC_TIMING_UHS_SDR12    3
 101 #define MMC_TIMING_UHS_SDR25    4
 102 #define MMC_TIMING_UHS_SDR50    5
 103 #define MMC_TIMING_UHS_SDR104   6
 104 #define MMC_TIMING_UHS_DDR50    7
 105 #define MMC_TIMING_MMC_DDR52    8
 106 #define MMC_TIMING_MMC_HS200    9
 107 #define MMC_TIMING_MMC_HS400    10
 108
 109 #define XENON_MMC_MAX_CLK       400000000
 110
 111 enum soc_pad_ctrl_type {
 112         SOC_PAD_SD,
 113         SOC_PAD_FIXED_1_8V,
 114 };
 115
 116 struct xenon_sdhci_plat {
 117         struct mmc_config cfg;
 118         struct mmc mmc;
 119 };
 120
 121 struct xenon_sdhci_priv {
 122         struct sdhci_host host;
 123
 124         u8 timing;
 125
 126         unsigned int clock;
 127
 128         void *pad_ctrl_reg;
 129         int pad_type;
 130 };
 131
 132 static int xenon_mmc_phy_init(struct sdhci_host *host)
 133 {
 134         struct xenon_sdhci_priv *priv = host->mmc->priv;
 135         u32 clock = priv->clock;
 136         u32 time;
 137         u32 var;
 138
 139         /* Enable QSP PHASE SELECT */
 140         var = sdhci_readl(host, EMMC_PHY_TIMING_ADJUST);
 141         var |= SAMPL_INV_QSP_PHASE_SELECT;
 142         if ((priv->timing == MMC_TIMING_UHS_SDR50) ||
 143             (priv->timing == MMC_TIMING_UHS_SDR25) ||
 144             (priv->timing == MMC_TIMING_UHS_SDR12) ||
 145             (priv->timing == MMC_TIMING_SD_HS) ||
 146             (priv->timing == MMC_TIMING_LEGACY))
 147                 var |= EMMC_PHY_SLOW_MODE;
 148         sdhci_writel(host, var, EMMC_PHY_TIMING_ADJUST);
 149
 150         /* Poll for host MMC PHY clock init to be stable */
 151         /* Wait up to 10ms */
 152         time = 100;
 153         while (time--) {
 154                 var = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
 155                 if (var & SDHCI_CLOCK_INT_STABLE)
 156                         break;
 157
 158                 udelay(100);
 159         }
 160
 161         if (time <= 0) {
 162                 pr_err("Failed to enable MMC internal clock in time\n");
 163                 return -ETIMEDOUT;
 164         }
 165
 166         /* Init PHY */
 167         var = sdhci_readl(host, EMMC_PHY_TIMING_ADJUST);
 168         var |= PHY_INITIALIZAION;
 169         sdhci_writel(host, var, EMMC_PHY_TIMING_ADJUST);
 170
 171         if (clock == 0) {
 172                 /* Use the possibly slowest bus frequency value */
 173                 clock = 100000;
 174         }
 175
 176         /* Poll for host eMMC PHY init to complete */
 177         /* Wait up to 10ms */
 178         time = 100;
 179         while (time--) {
 180                 var = sdhci_readl(host, EMMC_PHY_TIMING_ADJUST);
 181                 var &= PHY_INITIALIZAION;
 182                 if (!var)
 183                         break;
 184
 185                 /* wait for host eMMC PHY init to complete */
 186                 udelay(100);
 187         }
 188
 189         if (time <= 0) {
 190                 pr_err("Failed to init MMC PHY in time\n");
 191                 return -ETIMEDOUT;
 192         }
 193
 194         return 0;
 195 }
 196
 197 #define ARMADA_3700_SOC_PAD_1_8V        0x1
 198 #define ARMADA_3700_SOC_PAD_3_3V        0x0
 199
 200 static void armada_3700_soc_pad_voltage_set(struct sdhci_host *host)
 201 {
 202         struct xenon_sdhci_priv *priv = host->mmc->priv;
 203
 204         if (priv->pad_type == SOC_PAD_FIXED_1_8V)
 205                 writel(ARMADA_3700_SOC_PAD_1_8V, priv->pad_ctrl_reg);
 206         else if (priv->pad_type == SOC_PAD_SD)
 207                 writel(ARMADA_3700_SOC_PAD_3_3V, priv->pad_ctrl_reg);
 208 }
 209
 210 static void xenon_mmc_phy_set(struct sdhci_host *host)
 211 {
 212         struct xenon_sdhci_priv *priv = host->mmc->priv;
 213         u32 var;
 214
 215         /* Setup pad, set bit[30], bit[28] and bits[26:24] */
 216         var = sdhci_readl(host, EMMC_PHY_PAD_CONTROL);
 217         var |= AUTO_RECEN_CTRL | OEN_QSN | FC_QSP_RECEN |
 218                 FC_CMD_RECEN | FC_DQ_RECEN;
 219         sdhci_writel(host, var, EMMC_PHY_PAD_CONTROL);
 220
 221         /* Set CMD and DQ Pull Up */
 222         var = sdhci_readl(host, EMMC_PHY_PAD_CONTROL1);
 223         var |= (EMMC5_1_FC_CMD_PU | EMMC5_1_FC_DQ_PU);
 224         var &= ~(EMMC5_1_FC_CMD_PD | EMMC5_1_FC_DQ_PD);
 225         sdhci_writel(host, var, EMMC_PHY_PAD_CONTROL1);
 226
 227         /*
 228          * If timing belongs to high speed, set bit[17] of
 229          * EMMC_PHY_TIMING_ADJUST register
 230          */
 231         if ((priv->timing == MMC_TIMING_MMC_HS400) ||
 232             (priv->timing == MMC_TIMING_MMC_HS200) ||
 233             (priv->timing == MMC_TIMING_UHS_SDR50) ||
 234             (priv->timing == MMC_TIMING_UHS_SDR104) ||
 235             (priv->timing == MMC_TIMING_UHS_DDR50) ||
 236             (priv->timing == MMC_TIMING_UHS_SDR25) ||
 237             (priv->timing == MMC_TIMING_MMC_DDR52)) {
 238                 var = sdhci_readl(host, EMMC_PHY_TIMING_ADJUST);
 239                 var |= OUTPUT_QSN_PHASE_SELECT;
 240                 sdhci_writel(host, var, EMMC_PHY_TIMING_ADJUST);
 241         }
 242
 243         /*
 244          * When setting EMMC_PHY_FUNC_CONTROL register,
 245          * SD clock should be disabled
 246          */
 247         var = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
 248         var &= ~SDHCI_CLOCK_CARD_EN;
 249         sdhci_writew(host, var, SDHCI_CLOCK_CONTROL);
 250
 251         var = sdhci_readl(host, EMMC_PHY_FUNC_CONTROL);
 252         if (host->mmc->ddr_mode) {
 253                 var |= (DQ_DDR_MODE_MASK << DQ_DDR_MODE_SHIFT) | CMD_DDR_MODE;
 254         } else {
 255                 var &= ~((DQ_DDR_MODE_MASK << DQ_DDR_MODE_SHIFT) |
 256                          CMD_DDR_MODE);
 257         }
 258         sdhci_writel(host, var, EMMC_PHY_FUNC_CONTROL);
 259
 260         /* Enable bus clock */
 261         var = sdhci_readl(host, SDHCI_CLOCK_CONTROL);
 262         var |= SDHCI_CLOCK_CARD_EN;
 263         sdhci_writew(host, var, SDHCI_CLOCK_CONTROL);
 264
 265         xenon_mmc_phy_init(host);
 266 }
 267
 268 /* Enable/Disable the Auto Clock Gating function of this slot */
 269 static void xenon_mmc_set_acg(struct sdhci_host *host, bool enable)
 270 {
 271         u32 var;
 272
 273         var = sdhci_readl(host, SDHC_SYS_OP_CTRL);
 274         if (enable)
 275                 var &= ~AUTO_CLKGATE_DISABLE_MASK;
 276         else
 277                 var |= AUTO_CLKGATE_DISABLE_MASK;
 278
 279         sdhci_writel(host, var, SDHC_SYS_OP_CTRL);
 280 }
 281
 282 #define SLOT_MASK(slot)         BIT(slot)
 283
 284 /* Enable specific slot */
 285 static void xenon_mmc_enable_slot(struct sdhci_host *host, u8 slot)
 286 {
 287         u32 var;
 288
 289         var = sdhci_readl(host, SDHC_SYS_OP_CTRL);
 290         var |= SLOT_MASK(slot) << SLOT_ENABLE_SHIFT;
 291         sdhci_writel(host, var, SDHC_SYS_OP_CTRL);
 292 }
 293
 294 /* Enable Parallel Transfer Mode */
 295 static void xenon_mmc_enable_parallel_tran(struct sdhci_host *host, u8 slot)
 296 {
 297         u32 var;
 298
 299         var = sdhci_readl(host, SDHC_SYS_EXT_OP_CTRL);
 300         var |= SLOT_MASK(slot);
 301         sdhci_writel(host, var, SDHC_SYS_EXT_OP_CTRL);
 302 }
 303
 304 static void xenon_mmc_disable_tuning(struct sdhci_host *host, u8 slot)
 305 {
 306         u32 var;
 307
 308         /* Clear the Re-Tuning Request functionality */
 309         var = sdhci_readl(host, SDHC_SLOT_RETUNING_REQ_CTRL);
 310         var &= ~RETUNING_COMPATIBLE;
 311         sdhci_writel(host, var, SDHC_SLOT_RETUNING_REQ_CTRL);
 312
 313         /* Clear the Re-tuning Event Signal Enable */
 314         var = sdhci_readl(host, SDHCI_SIGNAL_ENABLE);
 315         var &= ~SDHCI_RETUNE_EVT_INTSIG;
 316         sdhci_writel(host, var, SDHCI_SIGNAL_ENABLE);
 317 }
 318
 319 /* Mask command conflict error */
 320 static void xenon_mask_cmd_conflict_err(struct sdhci_host *host)
 321 {
 322         u32  reg;
 323
 324         reg = sdhci_readl(host, SDHC_SYS_EXT_OP_CTRL);
 325         reg |= MASK_CMD_CONFLICT_ERROR;
 326         sdhci_writel(host, reg, SDHC_SYS_EXT_OP_CTRL);
 327 }
 328
 329 /* Platform specific function for post set_ios configuration */
 330 static void xenon_sdhci_set_ios_post(struct sdhci_host *host)
 331 {
 332         struct xenon_sdhci_priv *priv = host->mmc->priv;
 333         uint speed = host->mmc->tran_speed;
 334         int pwr_18v = 0;
 335
 336         if ((sdhci_readb(host, SDHCI_POWER_CONTROL) & ~SDHCI_POWER_ON) ==
 337             SDHCI_POWER_180)
 338                 pwr_18v = 1;
 339
 340         /* Set timing variable according to the configured speed */
 341         if (IS_SD(host->mmc)) {
 342                 /* SD/SDIO */
 343                 if (pwr_18v) {
 344                         if (host->mmc->ddr_mode)
 345                                 priv->timing = MMC_TIMING_UHS_DDR50;
 346                         else if (speed <= 25000000)
 347                                 priv->timing = MMC_TIMING_UHS_SDR25;
 348                         else
 349                                 priv->timing = MMC_TIMING_UHS_SDR50;
 350                 } else {
 351                         if (speed <= 25000000)
 352                                 priv->timing = MMC_TIMING_LEGACY;
 353                         else
 354                                 priv->timing = MMC_TIMING_SD_HS;
 355                 }
 356         } else {
 357                 /* eMMC */
 358                 if (host->mmc->ddr_mode)
 359                         priv->timing = MMC_TIMING_MMC_DDR52;
 360                 else if (speed <= 26000000)
 361                         priv->timing = MMC_TIMING_LEGACY;
 362                 else
 363                         priv->timing = MMC_TIMING_MMC_HS;
 364         }
 365
 366         /* Re-init the PHY */
 367         xenon_mmc_phy_set(host);
 368 }
 369
 370 /* Install a driver specific handler for post set_ios configuration */
 371 static const struct sdhci_ops xenon_sdhci_ops = {
 372         .set_ios_post = xenon_sdhci_set_ios_post
 373 };
 374
 375 static int xenon_sdhci_probe(struct udevice *dev)
 376 {
 377         struct xenon_sdhci_plat *plat = dev_get_platdata(dev);
 378         struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
 379         struct xenon_sdhci_priv *priv = dev_get_priv(dev);
 380         struct sdhci_host *host = dev_get_priv(dev);
 381         int ret;
 382
 383         host->mmc = &plat->mmc;
 384         host->mmc->priv = host;
 385         host->mmc->dev = dev;
 386         upriv->mmc = host->mmc;
 387
 388         /* Set quirks */
 389         host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD | SDHCI_QUIRK_32BIT_DMA_ADDR;
 390
 391         /* Set default timing */
 392         priv->timing = MMC_TIMING_LEGACY;
 393
 394         /* Disable auto clock gating during init */
 395         xenon_mmc_set_acg(host, false);
 396
 397         /* Enable slot */
 398         xenon_mmc_enable_slot(host, XENON_MMC_SLOT_ID_HYPERION);
 399
 400         /*
 401          * Set default power on SoC PHY PAD register (currently only
 402          * available on the Armada 3700)
 403          */
 404         if (priv->pad_ctrl_reg)
 405                 armada_3700_soc_pad_voltage_set(host);
 406
 407         host->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_DDR_52MHz;
 408         switch (fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), "bus-width",
 409                 1)) {
 410         case 8:
 411                 host->host_caps |= MMC_MODE_8BIT;
 412                 break;
 413         case 4:
 414                 host->host_caps |= MMC_MODE_4BIT;
 415                 break;
 416         case 1:
 417                 break;
 418         default:
 419                 printf("Invalid \"bus-width\" value\n");
 420                 return -EINVAL;
 421         }
 422
 423         host->ops = &xenon_sdhci_ops;
 424
 425         host->max_clk = XENON_MMC_MAX_CLK;
 426         ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
 427         if (ret)
 428                 return ret;
 429
 430         ret = sdhci_probe(dev);
 431         if (ret)
 432                 return ret;
 433
 434         /* Enable parallel transfer */
 435         xenon_mmc_enable_parallel_tran(host, XENON_MMC_SLOT_ID_HYPERION);
 436
 437         /* Disable tuning functionality of this slot */
 438         xenon_mmc_disable_tuning(host, XENON_MMC_SLOT_ID_HYPERION);
 439
 440         /* Enable auto clock gating after init */
 441         xenon_mmc_set_acg(host, true);
 442
 443         xenon_mask_cmd_conflict_err(host);
 444
 445         return ret;
 446 }
 447
 448 static int xenon_sdhci_ofdata_to_platdata(struct udevice *dev)
 449 {
 450         struct sdhci_host *host = dev_get_priv(dev);
 451         struct xenon_sdhci_priv *priv = dev_get_priv(dev);
 452         const char *name;
 453
 454         host->name = dev->name;
 455         host->ioaddr = (void *)devfdt_get_addr(dev);
 456
 457         if (device_is_compatible(dev, "marvell,armada-3700-sdhci"))
 458                 priv->pad_ctrl_reg = (void *)devfdt_get_addr_index(dev, 1);
 459
 460         name = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "marvell,pad-type",
 461                            NULL);
 462         if (name) {
 463                 if (0 == strncmp(name, "sd", 2)) {
 464                         priv->pad_type = SOC_PAD_SD;
 465                 } else if (0 == strncmp(name, "fixed-1-8v", 10)) {
 466                         priv->pad_type = SOC_PAD_FIXED_1_8V;
 467                 } else {
 468                         printf("Unsupported SOC PHY PAD ctrl type %s\n", name);
 469                         return -EINVAL;
 470                 }
 471         }
 472
 473         return 0;
 474 }
 475
 476 static int xenon_sdhci_bind(struct udevice *dev)
 477 {
 478         struct xenon_sdhci_plat *plat = dev_get_platdata(dev);
 479
 480         return sdhci_bind(dev, &plat->mmc, &plat->cfg);
 481 }
 482
 483 static const struct udevice_id xenon_sdhci_ids[] = {
 484         { .compatible = "marvell,armada-8k-sdhci",},
 485         { .compatible = "marvell,armada-3700-sdhci",},
 486         { }
 487 };
 488
 489 U_BOOT_DRIVER(xenon_sdhci_drv) = {
 490         .name           = "xenon_sdhci",
 491         .id             = UCLASS_MMC,
 492         .of_match       = xenon_sdhci_ids,
 493         .ofdata_to_platdata = xenon_sdhci_ofdata_to_platdata,
 494         .ops            = &sdhci_ops,
 495         .bind           = xenon_sdhci_bind,
 496         .probe          = xenon_sdhci_probe,
 497         .priv_auto_alloc_size = sizeof(struct xenon_sdhci_priv),
 498         .platdata_auto_alloc_size = sizeof(struct xenon_sdhci_plat),
 499 };