3 * Texas Instruments Incorporated.
6 * Configuration settings for the TI EVM5430 board.
7 * See ti_omap5_common.h for omap5 common settings.
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef __CONFIG_OMAP5_EVM_H
13 #define __CONFIG_OMAP5_EVM_H
15 #ifndef CONFIG_SPL_BUILD
16 /* Define the default GPT table for eMMC */
17 #define PARTS_DEFAULT \
18 "uuid_disk=${uuid_gpt_disk};" \
19 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
22 #define DFU_ALT_INFO_MMC \
27 "MLO.raw raw 0x100 0x100;" \
28 "u-boot.img.raw raw 0x300 0x400;" \
29 "spl-os-args.raw raw 0x80 0x80;" \
30 "spl-os-image.raw raw 0x900 0x2000;" \
31 "spl-os-args fat 0 1;" \
32 "spl-os-image fat 0 1;" \
33 "u-boot.img fat 0 1;" \
36 #define DFU_ALT_INFO_EMMC \
37 "dfu_alt_info_emmc=" \
38 "rawemmc raw 0 3751936;" \
42 "MLO.raw raw 0x100 0x100;" \
43 "u-boot.img.raw raw 0x300 0x400;" \
44 "spl-os-args.raw raw 0x80 0x80;" \
45 "spl-os-image.raw raw 0x900 0x2000;" \
46 "spl-os-args fat 1 1;" \
47 "spl-os-image fat 1 1;" \
48 "u-boot.img fat 1 1;" \
51 #define DFU_ALT_INFO_RAM \
53 "kernel ram 0x80200000 0x4000000;" \
54 "fdt ram 0x80f80000 0x80000;" \
55 "ramdisk ram 0x81000000 0x4000000\0"
58 "dfu_bufsiz=0x10000\0" \
63 #include <configs/ti_omap5_common.h>
65 #define CONFIG_CONS_INDEX 3
66 #define CONFIG_SYS_NS16550_COM3 UART3_BASE
67 #define CONFIG_BAUDRATE 115200
69 #define CONFIG_MISC_INIT_R
70 /* MMC ENV related defines */
71 #define CONFIG_ENV_IS_IN_MMC
72 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
73 #define CONFIG_ENV_SIZE (128 << 10)
74 #define CONFIG_ENV_OFFSET 0xE0000
75 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
76 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
78 /* Enhance our eMMC support / experience. */
79 #define CONFIG_CMD_GPT
80 #define CONFIG_EFI_PARTITION
81 #define CONFIG_HSMMC2_8BIT
82 #define CONFIG_SUPPORT_EMMC_BOOT
84 /* Required support for the TCA642X GPIO we have on the uEVM */
85 #define CONFIG_TCA642X
86 #define CONFIG_CMD_TCA642X
87 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
88 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
90 /* USB UHH support options */
91 #define CONFIG_USB_HOST
92 #define CONFIG_USB_EHCI
93 #define CONFIG_USB_EHCI_OMAP
94 #define CONFIG_USB_STORAGE
95 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
96 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
98 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
99 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
101 /* USB Device Firmware Update support */
102 #define CONFIG_USB_FUNCTION_DFU
103 #define CONFIG_DFU_RAM
105 #define CONFIG_DFU_MMC
107 /* Enabled commands */
109 /* USB Networking options */
110 #define CONFIG_USB_HOST_ETHER
111 #define CONFIG_USB_ETHER_SMSC95XX
113 #define CONSOLEDEV "ttyO2"
115 /* Max time to hold reset on this board, see doc/README.omap-reset-time */
116 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC 16296
118 #define CONFIG_CMD_SCSI
119 #define CONFIG_LIBATA
120 #define CONFIG_SCSI_AHCI
121 #define CONFIG_SCSI_AHCI_PLAT
122 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
123 #define CONFIG_SYS_SCSI_MAX_LUN 1
124 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
125 CONFIG_SYS_SCSI_MAX_LUN)
127 #endif /* __CONFIG_OMAP5_EVM_H */