dts/upstream/src/arm/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include "qcom-msm8974pro.dtsi"
   3 #include "pm8841.dtsi"
   4 #include "pm8941.dtsi"
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/leds/common.h>
   7 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   8
   9 / {
  10         aliases {
  11                 mmc0 = &sdhc_1;
  12                 mmc1 = &sdhc_2;
  13                 serial0 = &blsp1_uart2;
  14                 serial1 = &blsp2_uart1;
  15         };
  16
  17         chosen {
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         gpio-keys {
  22                 compatible = "gpio-keys";
  23
  24                 pinctrl-0 = <&gpio_keys_pin_a>;
  25                 pinctrl-names = "default";
  26
  27                 key-volume-down {
  28                         label = "volume_down";
  29                         gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
  30                         linux,code = <KEY_VOLUMEDOWN>;
  31                         debounce-interval = <15>;
  32                 };
  33
  34                 key-volume-up {
  35                         label = "volume_up";
  36                         gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
  37                         linux,code = <KEY_VOLUMEUP>;
  38                         debounce-interval = <15>;
  39                 };
  40         };
  41
  42         vreg_vsp: lcd-dcdc-regulator {
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "vreg_vsp";
  45                 regulator-min-microvolt = <5600000>;
  46                 regulator-max-microvolt = <5600000>;
  47
  48                 gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
  49                 enable-active-high;
  50
  51                 pinctrl-0 = <&lcd_dcdc_en_pin_a>;
  52                 pinctrl-names = "default";
  53         };
  54
  55         vreg_boost: vreg-boost {
  56                 compatible = "regulator-fixed";
  57
  58                 regulator-name = "vreg-boost";
  59                 regulator-min-microvolt = <3150000>;
  60                 regulator-max-microvolt = <3150000>;
  61
  62                 regulator-always-on;
  63                 regulator-boot-on;
  64
  65                 gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
  66                 enable-active-high;
  67
  68                 pinctrl-names = "default";
  69                 pinctrl-0 = <&boost_bypass_n_pin>;
  70         };
  71
  72         vreg_vph_pwr: vreg-vph-pwr {
  73                 compatible = "regulator-fixed";
  74                 regulator-name = "vph-pwr";
  75
  76                 regulator-min-microvolt = <3600000>;
  77                 regulator-max-microvolt = <3600000>;
  78
  79                 regulator-always-on;
  80         };
  81
  82         vreg_wlan: wlan-regulator {
  83                 compatible = "regulator-fixed";
  84
  85                 regulator-name = "wl-reg";
  86                 regulator-min-microvolt = <3300000>;
  87                 regulator-max-microvolt = <3300000>;
  88
  89                 gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
  90                 enable-active-high;
  91
  92                 pinctrl-0 = <&wlan_regulator_pin>;
  93                 pinctrl-names = "default";
  94         };
  95 };
  96
  97 &blsp1_uart2 {
  98         status = "okay";
  99 };
 100
 101 &blsp2_i2c2 {
 102         clock-frequency = <355000>;
 103
 104         status = "okay";
 105
 106         synaptics_touchscreen: synaptics@2c {
 107                 compatible = "syna,rmi4-i2c";
 108                 reg = <0x2c>;
 109
 110                 interrupt-parent = <&tlmm>;
 111                 interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
 112
 113                 #address-cells = <1>;
 114                 #size-cells = <0>;
 115
 116                 vdd-supply = <&pm8941_l22>;
 117                 /* vio-supply is set in dts */
 118
 119                 pinctrl-0 = <&ts_int_pin>;
 120                 pinctrl-names = "default";
 121
 122                 syna,startup-delay-ms = <100>;
 123
 124                 rmi4-f01@1 {
 125                         reg = <0x1>;
 126                         syna,nosleep-mode = <1>;
 127                 };
 128
 129                 rmi4-f11@11 {
 130                         reg = <0x11>;
 131                         syna,sensor-type = <1>;
 132                         touchscreen-inverted-x;
 133                 };
 134         };
 135 };
 136
 137 &pm8941_coincell {
 138         qcom,rset-ohms = <2100>;
 139         qcom,vset-millivolts = <3000>;
 140
 141         status = "okay";
 142 };
 143
 144 &pm8941_gpios {
 145         gpio_keys_pin_a: gpio-keys-active-state {
 146                 pins = "gpio2", "gpio5";
 147                 function = "normal";
 148                 bias-pull-up;
 149                 power-source = <PM8941_GPIO_S3>;
 150         };
 151
 152         wlan_sleep_clk_pin: wl-sleep-clk-state {
 153                 pins = "gpio17";
 154                 function = "func2";
 155                 output-high;
 156                 power-source = <PM8941_GPIO_S3>;
 157         };
 158
 159         wlan_regulator_pin: wl-reg-active-state {
 160                 pins = "gpio18";
 161                 function = "normal";
 162                 bias-disable;
 163                 power-source = <PM8941_GPIO_S3>;
 164         };
 165
 166         lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
 167                 pins = "gpio20";
 168                 function = "normal";
 169                 bias-disable;
 170                 power-source = <PM8941_GPIO_S3>;
 171                 input-disable;
 172                 output-low;
 173         };
 174 };
 175
 176 &pm8941_lpg {
 177         qcom,power-source = <1>;
 178
 179         status = "okay";
 180
 181         multi-led {
 182                 color = <LED_COLOR_ID_RGB>;
 183                 function = LED_FUNCTION_STATUS;
 184
 185                 #address-cells = <1>;
 186                 #size-cells = <0>;
 187
 188                 led@5 {
 189                         reg = <5>;
 190                         color = <LED_COLOR_ID_BLUE>;
 191                 };
 192
 193                 led@6 {
 194                         reg = <6>;
 195                         color = <LED_COLOR_ID_GREEN>;
 196                 };
 197
 198                 led@7 {
 199                         reg = <7>;
 200                         color = <LED_COLOR_ID_RED>;
 201                 };
 202         };
 203 };
 204
 205 &pm8941_vib {
 206         status = "okay";
 207 };
 208
 209 &remoteproc_adsp {
 210         cx-supply = <&pm8841_s2>;
 211         status = "okay";
 212 };
 213
 214 &remoteproc_mss {
 215         cx-supply = <&pm8841_s2>;
 216         mss-supply = <&pm8841_s3>;
 217         mx-supply = <&pm8841_s1>;
 218         pll-supply = <&pm8941_l12>;
 219         status = "okay";
 220 };
 221
 222 &rpm_requests {
 223         regulators-0 {
 224                 compatible = "qcom,rpm-pm8841-regulators";
 225
 226                 pm8841_s1: s1 {
 227                         regulator-min-microvolt = <675000>;
 228                         regulator-max-microvolt = <1050000>;
 229                 };
 230
 231                 pm8841_s2: s2 {
 232                         regulator-min-microvolt = <500000>;
 233                         regulator-max-microvolt = <1050000>;
 234                 };
 235
 236                 pm8841_s3: s3 {
 237                         regulator-min-microvolt = <500000>;
 238                         regulator-max-microvolt = <1050000>;
 239                 };
 240
 241                 pm8841_s4: s4 {
 242                         regulator-min-microvolt = <500000>;
 243                         regulator-max-microvolt = <1050000>;
 244                 };
 245         };
 246
 247         regulators-1 {
 248                 compatible = "qcom,rpm-pm8941-regulators";
 249
 250                 vdd_l1_l3-supply = <&pm8941_s1>;
 251                 vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
 252                 vdd_l4_l11-supply = <&pm8941_s1>;
 253                 vdd_l5_l7-supply = <&pm8941_s2>;
 254                 vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
 255                 vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
 256                 vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
 257                 vdd_l21-supply = <&vreg_boost>;
 258
 259                 pm8941_s1: s1 {
 260                         regulator-min-microvolt = <1300000>;
 261                         regulator-max-microvolt = <1300000>;
 262                         regulator-always-on;
 263                         regulator-boot-on;
 264                 };
 265
 266                 pm8941_s2: s2 {
 267                         regulator-min-microvolt = <2150000>;
 268                         regulator-max-microvolt = <2150000>;
 269                         regulator-boot-on;
 270                 };
 271
 272                 pm8941_s3: s3 {
 273                         regulator-min-microvolt = <1800000>;
 274                         regulator-max-microvolt = <1800000>;
 275                         regulator-system-load = <154000>;
 276                         regulator-always-on;
 277                         regulator-boot-on;
 278                 };
 279
 280                 pm8941_s4: s4 {
 281                         regulator-min-microvolt = <5000000>;
 282                         regulator-max-microvolt = <5000000>;
 283                 };
 284
 285                 pm8941_l1: l1 {
 286                         regulator-min-microvolt = <1225000>;
 287                         regulator-max-microvolt = <1225000>;
 288                         regulator-always-on;
 289                         regulator-boot-on;
 290                 };
 291
 292                 pm8941_l2: l2 {
 293                         regulator-min-microvolt = <1200000>;
 294                         regulator-max-microvolt = <1200000>;
 295                 };
 296
 297                 pm8941_l3: l3 {
 298                         regulator-min-microvolt = <1200000>;
 299                         regulator-max-microvolt = <1200000>;
 300                 };
 301
 302                 pm8941_l4: l4 {
 303                         regulator-min-microvolt = <1225000>;
 304                         regulator-max-microvolt = <1225000>;
 305                 };
 306
 307                 pm8941_l5: l5 {
 308                         regulator-min-microvolt = <1800000>;
 309                         regulator-max-microvolt = <1800000>;
 310                 };
 311
 312                 pm8941_l6: l6 {
 313                         regulator-min-microvolt = <1800000>;
 314                         regulator-max-microvolt = <1800000>;
 315                         regulator-boot-on;
 316                 };
 317
 318                 pm8941_l7: l7 {
 319                         regulator-min-microvolt = <1800000>;
 320                         regulator-max-microvolt = <1800000>;
 321                         regulator-boot-on;
 322                 };
 323
 324                 pm8941_l8: l8 {
 325                         regulator-min-microvolt = <1800000>;
 326                         regulator-max-microvolt = <1800000>;
 327                 };
 328
 329                 pm8941_l9: l9 {
 330                         regulator-min-microvolt = <1800000>;
 331                         regulator-max-microvolt = <2950000>;
 332                 };
 333
 334                 pm8941_l12: l12 {
 335                         regulator-min-microvolt = <1800000>;
 336                         regulator-max-microvolt = <1800000>;
 337                         regulator-always-on;
 338                         regulator-boot-on;
 339                 };
 340
 341                 pm8941_l13: l13 {
 342                         regulator-min-microvolt = <1800000>;
 343                         regulator-max-microvolt = <2950000>;
 344                         regulator-boot-on;
 345                 };
 346
 347                 pm8941_l14: l14 {
 348                         regulator-min-microvolt = <1800000>;
 349                         regulator-max-microvolt = <1800000>;
 350                 };
 351
 352                 pm8941_l15: l15 {
 353                         regulator-min-microvolt = <2050000>;
 354                         regulator-max-microvolt = <2050000>;
 355                 };
 356
 357                 pm8941_l16: l16 {
 358                         regulator-min-microvolt = <2700000>;
 359                         regulator-max-microvolt = <2700000>;
 360                 };
 361
 362                 pm8941_l17: l17 {
 363                         regulator-min-microvolt = <2700000>;
 364                         regulator-max-microvolt = <2700000>;
 365                 };
 366
 367                 pm8941_l18: l18 {
 368                         regulator-min-microvolt = <2850000>;
 369                         regulator-max-microvolt = <2850000>;
 370                 };
 371
 372                 pm8941_l20: l20 {
 373                         regulator-min-microvolt = <2950000>;
 374                         regulator-max-microvolt = <2950000>;
 375                         regulator-system-load = <500000>;
 376                         regulator-allow-set-load;
 377                         regulator-boot-on;
 378                 };
 379
 380                 pm8941_l21: l21 {
 381                         regulator-min-microvolt = <2950000>;
 382                         regulator-max-microvolt = <2950000>;
 383                         regulator-system-load = <500000>;
 384                         regulator-allow-set-load;
 385                         regulator-boot-on;
 386                 };
 387
 388                 pm8941_l22: l22 {
 389                         regulator-min-microvolt = <3000000>;
 390                         regulator-max-microvolt = <3000000>;
 391                 };
 392
 393                 pm8941_l23: l23 {
 394                         regulator-min-microvolt = <2800000>;
 395                         regulator-max-microvolt = <2800000>;
 396                 };
 397
 398                 pm8941_l24: l24 {
 399                         regulator-min-microvolt = <3075000>;
 400                         regulator-max-microvolt = <3075000>;
 401                         regulator-boot-on;
 402                 };
 403
 404                 pm8941_lvs3: lvs3 {};
 405         };
 406 };
 407
 408 &sdhc_1 {
 409         vmmc-supply = <&pm8941_l20>;
 410         vqmmc-supply = <&pm8941_s3>;
 411
 412         pinctrl-0 = <&sdc1_on>;
 413         pinctrl-1 = <&sdc1_off>;
 414         pinctrl-names = "default", "sleep";
 415
 416         status = "okay";
 417 };
 418
 419 &sdhc_2 {
 420         vmmc-supply = <&pm8941_l21>;
 421         vqmmc-supply = <&pm8941_l13>;
 422
 423         cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
 424
 425         pinctrl-0 = <&sdc2_on>;
 426         pinctrl-1 = <&sdc2_off>;
 427         pinctrl-names = "default", "sleep";
 428
 429         status = "okay";
 430 };
 431
 432 &sdhc_3 {
 433         max-frequency = <100000000>;
 434         vmmc-supply = <&vreg_wlan>;
 435         non-removable;
 436
 437         pinctrl-0 = <&sdc3_on>;
 438         pinctrl-names = "default";
 439
 440         status = "okay";
 441
 442         wifi@1 {
 443                 compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
 444                 reg = <1>;
 445
 446                 brcm,drive-strength = <10>;
 447
 448                 pinctrl-0 = <&wlan_sleep_clk_pin>;
 449                 pinctrl-names = "default";
 450         };
 451 };
 452
 453 &tlmm {
 454         sdc1_on: sdc1-on-state {
 455                 clk-pins {
 456                         pins = "sdc1_clk";
 457                         drive-strength = <16>;
 458                         bias-disable;
 459                 };
 460
 461                 cmd-data-pins {
 462                         pins = "sdc1_cmd", "sdc1_data";
 463                         drive-strength = <10>;
 464                         bias-pull-up;
 465                 };
 466         };
 467
 468         sdc2_on: sdc2-on-state {
 469                 clk-pins {
 470                         pins = "sdc2_clk";
 471                         drive-strength = <6>;
 472                         bias-disable;
 473                 };
 474
 475                 cmd-data-pins {
 476                         pins = "sdc2_cmd", "sdc2_data";
 477                         drive-strength = <6>;
 478                         bias-pull-up;
 479                 };
 480
 481                 cd-pins {
 482                         pins = "gpio62";
 483                         function = "gpio";
 484                         drive-strength = <2>;
 485                         bias-disable;
 486                 };
 487         };
 488
 489         sdc3_on: sdc3-on-state {
 490                 clk-pins {
 491                         pins = "gpio40";
 492                         function = "sdc3";
 493                         drive-strength = <10>;
 494                         bias-disable;
 495                 };
 496
 497                 cmd-pins {
 498                         pins = "gpio39";
 499                         function = "sdc3";
 500                         drive-strength = <10>;
 501                         bias-pull-up;
 502                 };
 503
 504                 data-pins {
 505                         pins = "gpio35", "gpio36", "gpio37", "gpio38";
 506                         function = "sdc3";
 507                         drive-strength = <10>;
 508                         bias-pull-up;
 509                 };
 510         };
 511
 512         ts_int_pin: ts-int-pin-state {
 513                 pins = "gpio86";
 514                 function = "gpio";
 515                 drive-strength = <2>;
 516                 bias-disable;
 517         };
 518 };
 519
 520 &usb {
 521         phys = <&usb_hs1_phy>;
 522         phy-select = <&tcsr 0xb000 0>;
 523         extcon = <&smbb>, <&usb_id>;
 524         vbus-supply = <&chg_otg>;
 525
 526         hnp-disable;
 527         srp-disable;
 528         adp-disable;
 529
 530         status = "okay";
 531 };
 532
 533 &usb_hs1_phy {
 534         v1p8-supply = <&pm8941_l6>;
 535         v3p3-supply = <&pm8941_l24>;
 536
 537         extcon = <&smbb>;
 538         qcom,init-seq = /bits/ 8 <0x1 0x64>;
 539
 540         status = "okay";
 541 };