arch/arm/dts/exynos5250-spring.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Google Spring board device tree source
   4  *
   5  * Copyright (c) 2013 Google, Inc
   6  * Copyright (c) 2014 SUSE LINUX Products GmbH
   7  */
   8
   9 /dts-v1/;
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/interrupt-controller/irq.h>
  12 #include <dt-bindings/input/input.h>
  13 #include "exynos5250.dtsi"
  14
  15 / {
  16         model = "Google Spring";
  17         compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
  18
  19         aliases {
  20                 i2c0 = "/i2c@12C60000";
  21                 i2c1 = "/i2c@12C70000";
  22                 i2c2 = "/i2c@12C80000";
  23                 i2c3 = "/i2c@12C90000";
  24                 i2c4 = "/i2c@12CA0000";
  25                 i2c5 = "/i2c@12CB0000";
  26                 i2c6 = "/i2c@12CC0000";
  27                 i2c7 = "/i2c@12CD0000";
  28                 i2c104 = &cros_ec_ldo_tunnel;
  29                 spi0 = "/spi@12d20000";
  30                 spi1 = "/spi@12d30000";
  31                 spi2 = "/spi@12d40000";
  32                 spi3 = "/spi@131a0000";
  33                 spi4 = "/spi@131b0000";
  34                 mmc0 = "/mmc@12200000";
  35                 serial0 = "/serial@12C30000";
  36                 console = "/serial@12C30000";
  37         };
  38
  39         memory {
  40                 reg = <0x40000000 0x80000000>;
  41         };
  42
  43         iram {
  44                 reg = <0x02020000 0x60000>;
  45         };
  46
  47         config {
  48                 samsung,bl1-offset = <0x1400>;
  49                 samsung,bl2-offset = <0x3400>;
  50                 u-boot-memory = "/memory";
  51                 u-boot-offset = <0x3e00000 0x100000>;
  52         };
  53
  54         flash@0 {
  55                 reg = <0 0x100000>;
  56                 #address-cells = <1>;
  57                 #size-cells = <1>;
  58                 pre-boot {
  59                         label = "bl1 pre-boot";
  60                         reg = <0 0x2000>;
  61                         read-only;
  62                         filename = "e5250.nbl1.bin";
  63                         type = "blob exynos-bl1";
  64                         required;
  65                 };
  66
  67                 spl {
  68                         label = "bl2 spl";
  69                         reg = <0x2000 0x8000>;
  70                         read-only;
  71                         filename = "bl2.bin";
  72                         type = "blob exynos-bl2 boot,dtb";
  73                         payload = "/flash/ro-boot";
  74                         required;
  75                 };
  76
  77                 ro-boot {
  78                         label = "u-boot";
  79                         reg = <0xa000 0xb0000>;
  80                         read-only;
  81                         type = "blob boot,dtb";
  82                         required;
  83                 };
  84         };
  85
  86         chosen {
  87                 bootargs = "console=tty1";
  88                 stdout-path = "serial3:115200n8";
  89         };
  90
  91         board-rev {
  92                 compatible = "google,board-revision";
  93                 google,board-rev-gpios = <&gpy4 0 0>, <&gpy4 1 0>,
  94                                          <&gpy4 2 0>;
  95         };
  96
  97         i2c@12C90000 {
  98                 clock-frequency = <100000>;
  99                 tpm@20 {
 100                         reg = <0x20>;
 101                         compatible = "infineon,slb9645tt";
 102                 };
 103         };
 104
 105         mmc@12200000 {
 106                 bus-width = <8>;
 107                 samsung,dw-mshc-ciu-div = <3>;
 108                 samsung,dw-mshc-sdr-timing = <1 3>;
 109                 non-removable;
 110         };
 111
 112         mmc@12210000 {
 113                 status = "disabled";
 114         };
 115
 116         mmc@12220000 {
 117                 /* MMC2 pins are used as GPIO for eDP bridge */
 118                 status = "disabled";
 119         };
 120
 121         mmc@12230000 {
 122                 status = "disabled";
 123         };
 124
 125         ehci@12110000 {
 126                 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
 127                 status = "okay";
 128         };
 129
 130         xhci@12000000 {
 131                 samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
 132         };
 133
 134         sound {
 135                 compatible = "google,spring-audio-max98088";
 136
 137                 samsung,model = "Spring-I2S-MAX98088";
 138                 samsung,audio-codec = <&max98088>;
 139                 codec-enable-gpio = <&gpx1 7 0>;
 140
 141                 cpu {
 142                         sound-dai = <&i2s1 0>;
 143                 };
 144
 145                 codec {
 146                         sound-dai = <&max98088 0>;
 147                 };
 148         };
 149
 150         spi@12d30000 {
 151                 spi-max-frequency = <50000000>;
 152                 firmware_storage_spi: flash@0 {
 153                         compatible = "jedec,spi-nor";
 154                         reg = <0>;
 155                 };
 156         };
 157
 158         tmu@10060000 {
 159                 samsung,min-temp        = <25>;
 160                 samsung,max-temp        = <125>;
 161                 samsung,start-warning   = <95>;
 162                 samsung,start-tripping  = <105>;
 163                 samsung,hw-tripping     = <110>;
 164                 samsung,efuse-min-value = <40>;
 165                 samsung,efuse-value     = <55>;
 166                 samsung,efuse-max-value = <100>;
 167                 samsung,slope           = <274761730>;
 168                 samsung,dc-value        = <25>;
 169         };
 170
 171         fimd@14400000 {
 172                 samsung,vl-freq = <60>;
 173                 samsung,vl-col = <1366>;
 174                 samsung,vl-row = <768>;
 175                 samsung,vl-width = <1366>;
 176                 samsung,vl-height = <768>;
 177
 178                 samsung,vl-clkp;
 179                 samsung,vl-dp;
 180                 samsung,vl-hsp;
 181                 samsung,vl-vsp;
 182
 183                 samsung,vl-bpix = <4>;
 184
 185                 samsung,vl-hspw = <32>;
 186                 samsung,vl-hbpd = <80>;
 187                 samsung,vl-hfpd = <48>;
 188                 samsung,vl-vspw = <5>;
 189                 samsung,vl-vbpd = <14>;
 190                 samsung,vl-vfpd = <3>;
 191                 samsung,vl-cmd-allow-len = <0xf>;
 192
 193                 samsung,winid = <0>;
 194                 samsung,interface-mode = <1>;
 195                 samsung,dp-enabled = <1>;
 196                 samsung,dual-lcd-enabled = <0>;
 197         };
 198
 199         dp@145b0000 {
 200                 samsung,lt-status = <0>;
 201
 202                 samsung,master-mode = <0>;
 203                 samsung,bist-mode = <0>;
 204                 samsung,bist-pattern = <0>;
 205                 samsung,h-sync-polarity = <0>;
 206                 samsung,v-sync-polarity = <0>;
 207                 samsung,interlaced = <0>;
 208                 samsung,color-space = <0>;
 209                 samsung,dynamic-range = <0>;
 210                 samsung,ycbcr-coeff = <0>;
 211                 samsung,color-depth = <1>;
 212         };
 213
 214         backlight: backlight {
 215                 compatible = "pwm-backlight";
 216                 pwms = <&pwm 0 1000000 0>;
 217                 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
 218                 default-brightness-level = <1>;
 219                 enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
 220                 power-supply = <&fet1>;
 221         };
 222
 223         panel: panel {
 224                 compatible = "auo,b116xw03";
 225                 power-supply = <&fet6>;
 226                 backlight = <&backlight>;
 227
 228                 port {
 229                         panel_in: endpoint {
 230                                 remote-endpoint = <&bridge_out>;
 231                         };
 232                 };
 233         };
 234 };
 235
 236 &i2c_0 {
 237         status = "okay";
 238         samsung,i2c-sda-delay = <100>;
 239         samsung,i2c-max-bus-freq = <378000>;
 240
 241         s5m8767-pmic@66 {
 242                 compatible = "samsung,s5m8767-pmic";
 243                 reg = <0x66>;
 244                 interrupt-parent = <&gpx3>;
 245                 wakeup-source;
 246
 247                 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
 248                                               <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
 249                                               <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
 250
 251                 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
 252                                              <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
 253                                              <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
 254
 255                 /*
 256                  * The following arrays of DVS voltages are not used, since we are
 257                  * not using GPIOs to control PMIC bucks, but they must be defined
 258                  * to please the driver.
 259                  */
 260                 s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
 261                                                  <1250000>, <1200000>,
 262                                                  <1150000>, <1100000>,
 263                                                  <1000000>, <950000>;
 264
 265                 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
 266                                                  <1100000>, <1100000>,
 267                                                  <1000000>, <1000000>,
 268                                                  <1000000>, <1000000>;
 269
 270                 s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
 271                                                  <1200000>, <1200000>,
 272                                                  <1200000>, <1200000>,
 273                                                  <1200000>, <1200000>;
 274
 275                 clocks {
 276                         compatible = "samsung,s5m8767-clk";
 277                         #clock-cells = <1>;
 278                         clock-output-names = "en32khz_ap",
 279                                              "en32khz_cp",
 280                                              "en32khz_bt";
 281                 };
 282
 283                 regulators {
 284                         ldo4_reg: LDO4 {
 285                                 regulator-name = "P1.0V_LDO_OUT4";
 286                                 regulator-min-microvolt = <1000000>;
 287                                 regulator-max-microvolt = <1000000>;
 288                                 regulator-always-on;
 289                                 op_mode = <0>;
 290                         };
 291
 292                         ldo5_reg: LDO5 {
 293                                 regulator-name = "P1.8V_LDO_OUT5";
 294                                 regulator-min-microvolt = <1800000>;
 295                                 regulator-max-microvolt = <1800000>;
 296                                 regulator-always-on;
 297                                 op_mode = <0>;
 298                         };
 299
 300                         ldo6_reg: LDO6 {
 301                                 regulator-name = "vdd_mydp";
 302                                 regulator-min-microvolt = <1200000>;
 303                                 regulator-max-microvolt = <1200000>;
 304                                 regulator-always-on;
 305                                 op_mode = <3>;
 306                         };
 307
 308                         ldo7_reg: LDO7 {
 309                                 regulator-name = "P1.1V_LDO_OUT7";
 310                                 regulator-min-microvolt = <1100000>;
 311                                 regulator-max-microvolt = <1100000>;
 312                                 regulator-always-on;
 313                                 op_mode = <3>;
 314                         };
 315
 316                         ldo8_reg: LDO8 {
 317                                 regulator-name = "P1.0V_LDO_OUT8";
 318                                 regulator-min-microvolt = <1000000>;
 319                                 regulator-max-microvolt = <1000000>;
 320                                 regulator-always-on;
 321                                 op_mode = <3>;
 322                         };
 323
 324                         ldo10_reg: LDO10 {
 325                                 regulator-name = "P1.8V_LDO_OUT10";
 326                                 regulator-min-microvolt = <1800000>;
 327                                 regulator-max-microvolt = <1800000>;
 328                                 regulator-always-on;
 329                                 op_mode = <3>;
 330                         };
 331
 332                         ldo11_reg: LDO11 {
 333                                 regulator-name = "P1.8V_LDO_OUT11";
 334                                 regulator-min-microvolt = <1800000>;
 335                                 regulator-max-microvolt = <1800000>;
 336                                 regulator-always-on;
 337                                 op_mode = <0>;
 338                         };
 339
 340                         ldo12_reg: LDO12 {
 341                                 regulator-name = "P3.0V_LDO_OUT12";
 342                                 regulator-min-microvolt = <3000000>;
 343                                 regulator-max-microvolt = <3000000>;
 344                                 regulator-always-on;
 345                                 op_mode = <3>;
 346                         };
 347
 348                         ldo13_reg: LDO13 {
 349                                 regulator-name = "P1.8V_LDO_OUT13";
 350                                 regulator-min-microvolt = <1800000>;
 351                                 regulator-max-microvolt = <1800000>;
 352                                 regulator-always-on;
 353                                 op_mode = <0>;
 354                         };
 355
 356                         ldo14_reg: LDO14 {
 357                                 regulator-name = "P1.8V_LDO_OUT14";
 358                                 regulator-min-microvolt = <1800000>;
 359                                 regulator-max-microvolt = <1800000>;
 360                                 regulator-always-on;
 361                                 op_mode = <3>;
 362                         };
 363
 364                         ldo15_reg: LDO15 {
 365                                 regulator-name = "P1.0V_LDO_OUT15";
 366                                 regulator-min-microvolt = <1000000>;
 367                                 regulator-max-microvolt = <1000000>;
 368                                 regulator-always-on;
 369                                 op_mode = <3>;
 370                         };
 371
 372                         ldo16_reg: LDO16 {
 373                                 regulator-name = "P1.8V_LDO_OUT16";
 374                                 regulator-min-microvolt = <1800000>;
 375                                 regulator-max-microvolt = <1800000>;
 376                                 regulator-always-on;
 377                                 op_mode = <3>;
 378                         };
 379
 380                         ldo17_reg: LDO17 {
 381                                 regulator-name = "P1.2V_LDO_OUT17";
 382                                 regulator-min-microvolt = <1200000>;
 383                                 regulator-max-microvolt = <1200000>;
 384                                 regulator-always-on;
 385                                 op_mode = <0>;
 386                         };
 387
 388                         ldo25_reg: LDO25 {
 389                                 regulator-name = "vdd_bridge";
 390                                 regulator-min-microvolt = <1200000>;
 391                                 regulator-max-microvolt = <1200000>;
 392                                 regulator-always-on;
 393                                 op_mode = <1>;
 394                         };
 395
 396                         buck1_reg: BUCK1 {
 397                                 regulator-name = "vdd_mif";
 398                                 regulator-min-microvolt = <950000>;
 399                                 regulator-max-microvolt = <1300000>;
 400                                 regulator-always-on;
 401                                 regulator-boot-on;
 402                                 op_mode = <3>;
 403                         };
 404
 405                         buck2_reg: BUCK2 {
 406                                 regulator-name = "vdd_arm";
 407                                 regulator-min-microvolt = <850000>;
 408                                 regulator-max-microvolt = <1350000>;
 409                                 regulator-always-on;
 410                                 regulator-boot-on;
 411                                 op_mode = <3>;
 412                         };
 413
 414                         buck3_reg: BUCK3 {
 415                                 regulator-name = "vdd_int";
 416                                 regulator-min-microvolt = <900000>;
 417                                 regulator-max-microvolt = <1200000>;
 418                                 regulator-always-on;
 419                                 regulator-boot-on;
 420                                 op_mode = <3>;
 421                         };
 422
 423                         buck4_reg: BUCK4 {
 424                                 regulator-name = "vdd_g3d";
 425                                 regulator-min-microvolt = <850000>;
 426                                 regulator-max-microvolt = <1300000>;
 427                                 regulator-boot-on;
 428                                 op_mode = <3>;
 429                         };
 430
 431                         buck5_reg: BUCK5 {
 432                                 regulator-name = "P1.8V_BUCK_OUT5";
 433                                 regulator-min-microvolt = <1800000>;
 434                                 regulator-max-microvolt = <1800000>;
 435                                 regulator-always-on;
 436                                 regulator-boot-on;
 437                                 op_mode = <1>;
 438                         };
 439
 440                         buck6_reg: BUCK6 {
 441                                 regulator-name = "P1.2V_BUCK_OUT6";
 442                                 regulator-min-microvolt = <2050000>;
 443                                 regulator-max-microvolt = <2050000>;
 444                                 regulator-always-on;
 445                                 regulator-boot-on;
 446                                 op_mode = <0>;
 447                         };
 448
 449                         buck9_reg: BUCK9 {
 450                                 regulator-name = "vdd_ummc";
 451                                 regulator-min-microvolt = <950000>;
 452                                 regulator-max-microvolt = <3000000>;
 453                                 regulator-always-on;
 454                                 regulator-boot-on;
 455                                 op_mode = <3>;
 456                         };
 457                 };
 458         };
 459 };
 460
 461 &dp {
 462         status = "okay";
 463         samsung,color-space = <0>;
 464         samsung,dynamic-range = <0>;
 465         samsung,ycbcr-coeff = <0>;
 466         samsung,color-depth = <1>;
 467         samsung,link-rate = <0x0a>;
 468         samsung,lane-count = <1>;
 469         samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
 470
 471         ports {
 472                 port@0 {
 473                         dp_out: endpoint {
 474                                 remote-endpoint = <&bridge_in>;
 475                         };
 476                 };
 477         };
 478 };
 479
 480 &i2c_1 {
 481         status = "okay";
 482         samsung,i2c-sda-delay = <100>;
 483         samsung,i2c-max-bus-freq = <378000>;
 484 };
 485
 486 &i2c_2 {
 487         status = "okay";
 488         samsung,i2c-sda-delay = <100>;
 489         samsung,i2c-max-bus-freq = <66000>;
 490 };
 491
 492 &i2c_3 {
 493         status = "okay";
 494         samsung,i2c-sda-delay = <100>;
 495         samsung,i2c-max-bus-freq = <66000>;
 496 };
 497
 498 &i2c_4 {
 499         status = "okay";
 500         samsung,i2c-sda-delay = <100>;
 501         samsung,i2c-max-bus-freq = <66000>;
 502         clock-frequency = <66000>;
 503
 504         cros_ec: embedded-controller {
 505                 compatible = "google,cros-ec-i2c";
 506                 reg = <0x1e>;
 507                 interrupts = <6 IRQ_TYPE_NONE>;
 508                 interrupt-parent = <&gpx1>;
 509                 wakeup-source;
 510                 u-boot,i2c-offset-len = <0>;
 511                 ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
 512                 cros_ec_ldo_tunnel: cros-ec-ldo-tunnel {
 513                         compatible = "google,cros-ec-ldo-tunnel";
 514                         #address-cells = <1>;
 515                         #size-cells = <0>;
 516                         power-regulator {
 517                                 compatible = "ti,tps65090";
 518                                 reg = <0x48>;
 519
 520                                 regulators {
 521                                         dcdc1 {
 522                                                 ti,enable-ext-control;
 523                                         };
 524                                         dcdc2 {
 525                                                 ti,enable-ext-control;
 526                                         };
 527                                         dcdc3 {
 528                                                 ti,enable-ext-control;
 529                                         };
 530                                         fet1: fet1 {
 531                                                 regulator-name = "vcd_led";
 532                                                 ti,overcurrent-wait = <3>;
 533                                         };
 534                                         tps65090_fet2: fet2 {
 535                                                 regulator-name = "video_mid";
 536                                                 regulator-always-on;
 537                                                 ti,overcurrent-wait = <3>;
 538                                         };
 539                                         fet3 {
 540                                                 regulator-name = "wwan_r";
 541                                                 regulator-always-on;
 542                                                 ti,overcurrent-wait = <3>;
 543                                         };
 544                                         fet4 {
 545                                                 regulator-name = "sdcard";
 546                                                 ti,overcurrent-wait = <3>;
 547                                         };
 548                                         fet5 {
 549                                                 regulator-name = "camout";
 550                                                 regulator-always-on;
 551                                                 ti,overcurrent-wait = <3>;
 552                                         };
 553                                         fet6: fet6 {
 554                                                 regulator-name = "lcd_vdd";
 555                                                 ti,overcurrent-wait = <3>;
 556                                         };
 557                                         tps65090_fet7: fet7 {
 558                                                 regulator-name = "video_mid_1a";
 559                                                 regulator-always-on;
 560                                                 ti,overcurrent-wait = <3>;
 561                                         };
 562                                         ldo1 {
 563                                         };
 564                                         ldo2 {
 565                                         };
 566                                 };
 567                         };
 568                 };
 569         };
 570 };
 571
 572 &i2c_5 {
 573         status = "okay";
 574         samsung,i2c-sda-delay = <100>;
 575         samsung,i2c-max-bus-freq = <66000>;
 576 };
 577
 578 &i2c_7 {
 579         status = "okay";
 580         samsung,i2c-sda-delay = <100>;
 581         samsung,i2c-max-bus-freq = <66000>;
 582
 583         ps8622-bridge@8 {
 584                 compatible = "parade,ps8622";
 585                 reg = <0x8>;
 586                 sleep-gpios = <&gpc3 6 GPIO_ACTIVE_LOW>;
 587                 reset-gpios = <&gpc3 1 GPIO_ACTIVE_LOW>;
 588                 hotplug-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
 589                 power-supply = <&ldo6_reg>;
 590                 parade,regs = /bits/ 8 <
 591                         0x02 0xa1 0x01 /* HPD low */
 592                         /*
 593                          * SW setting: [1:0] SW output 1.2V voltage is
 594                          * lower to 96%
 595                          */
 596                         0x04 0x14 0x01
 597                         /* RCO SS setting: [5:4] = b01 0.5%, b10 1%, b11 1.5% */
 598                         0x04 0xe3 0x20
 599                         0x04 0xe2 0x80 /* [7] RCO SS enable */
 600                         /*
 601                          * RPHY Setting: [3:2] CDR tune wait cycle before
 602                          * measure for fine tune b00: 1us,
 603                          * 01: 0.5us, 10:2us, 11:4us
 604                          */
 605                         0x04 0x8a 0x0c
 606                         0x04 0x89 0x08 /* [3] RFD always on */
 607                         /*
 608                          * CTN lock in/out: 20000ppm/80000ppm. Lock out 2 times
 609                          */
 610                         0x04 0x71 0x2d
 611                         /* 2.7G CDR settings */
 612                         0x04 0x7d 0x07 /* NOF=40LSB for HBR CDR setting */
 613                         0x04 0x7b 0x00 /* [1:0] Fmin=+4bands */
 614                         0x04 0x7a 0xfd /* [7:5] DCO_FTRNG=+-40% */
 615                         /*
 616                          * 1.62G CDR settings:
 617                          * [5:2]NOF=64LSB [1:0]DCO scale is 2/5
 618                          */
 619                         0x04 0xc0 0x12
 620                         0x04 0xc1 0x92 /* Gitune=-37% */
 621                         0x04 0xc2 0x1c /* Fbstep=100% */
 622                         0x04 0x32 0x80 /* [7] LOS signal disable */
 623                         /* RPIO Setting */
 624                         /* [7:4] LVDS driver bias current 75% (250mV swing) */
 625                         0x04 0x00 0xb0
 626                          /* [7:6] Right-bar GPIO output strength is 8mA */
 627                         0x04 0x15 0x40
 628                         /* EQ Training State Machine Setting */
 629                         0x04 0x54 0x10 /* RCO calibration start */
 630                         /* [4:0] MAX_LANE_COUNT set to one lane */
 631                         0x01 0x02 0x81
 632                         /* [4:0] LANE_COUNT_SET set to one lane */
 633                         0x01 0x21 0x81
 634                         0x00 0x52 0x20
 635                         0x00 0xf1 0x03 /* HPD CP toggle enable */
 636                         0x00 0x62 0x41
 637                         /* Counter number add 1ms counter delay */
 638                         0x00 0xf6 0x01
 639                         /*
 640                          * [6]PWM function control by DPCD0040f[7], default
 641                          * is PWM block always works
 642                          */
 643                         0x00 0x77 0x06
 644                         0x00 0x4c 0x04
 645                         /*
 646                          * 04h Adjust VTotal tolerance to fix the 30Hz no-
 647                          * display issue
 648                          * DPCD00400='h00 Parade OUI = 'h001cf8
 649                          */
 650                         0x01 0xc0 0x00
 651                         0x01 0xc1 0x1c /* DPCD00401='h1c */
 652                         0x01 0xc2 0xf8 /* DPCD00402='hf8 */
 653                         /* DPCD403~408 = ASCII code D2SLV5='h4432534c5635 */
 654                         0x01 0xc3 0x44
 655                         0x01 0xc4 0x32 /* DPCD404 */
 656                         0x01 0xc5 0x53 /* DPCD405 */
 657                         0x01 0xc6 0x4c /* DPCD406 */
 658                         0x01 0xc7 0x56 /* DPCD407 */
 659                         0x01 0xc8 0x35 /* DPCD408 */
 660                         /* DPCD40A Initial Code major revision '01' */
 661                         0x01 0xca 0x01
 662                         /* DPCD40B Initial Code minor revision '05' */
 663                         0x01 0xcb 0x05
 664                         0x01 0xa5 0xa0 /* DPCD720, Select internal PWM */
 665                         /*
 666                          * 0xff for 100% PWM of brightness, 0h for 0% brightness
 667                          */
 668                         0x01 0xa7 0x00
 669                         /*
 670                          * Set LVDS output as 6bit-VESA mapping, single LVDS
 671                          * channel
 672                          */
 673                         0x01 0xcc 0x13
 674                         0x02 0xb1 0x20 /* Enable SSC set by register */
 675                         /* Set SSC enabled and +/-1% central spreading */
 676                         0x04 0x10 0x16
 677                         0x04 0x59 0x60 /* MPU Clock source: LC => RCO */
 678                         0x04 0x54 0x14 /* LC -> RCO */
 679                         0x02 0xa1 0x91>; /* HPD high */
 680                 ports {
 681                         port@0 {
 682                                 bridge_out: endpoint {
 683                                         remote-endpoint = <&panel_in>;
 684                                 };
 685                         };
 686
 687                         port@1 {
 688                                 bridge_in: endpoint {
 689                                         remote-endpoint = <&dp_out>;
 690                                 };
 691                         };
 692                 };
 693         };
 694
 695         max98088: soundcodec@10 {
 696                 reg = <0x10>;
 697                 compatible = "maxim,max98088";
 698                 #sound-dai-cells = <1>;
 699         };
 700 };
 701
 702 #include "cros-ec-keyboard.dtsi"