include/configs/C29XPCIE.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * C29XPCIE board configuration file
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 #ifdef CONFIG_SPIFLASH
  15 #define CONFIG_RAMBOOT_SPIFLASH
  16 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  17 #endif
  18
  19 #ifdef CONFIG_NAND
  20 #ifdef CONFIG_TPL_BUILD
  21 #define CONFIG_SPL_NAND_BOOT
  22 #define CONFIG_SPL_FLUSH_IMAGE
  23 #define CONFIG_SPL_NAND_INIT
  24 #define CONFIG_TPL_DRIVERS_MISC_SUPPORT
  25 #define CONFIG_SPL_COMMON_INIT_DDR
  26 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  27 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  28 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  29 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
  30 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  31 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  32 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
  33 #elif defined(CONFIG_SPL_BUILD)
  34 #define CONFIG_SPL_INIT_MINIMAL
  35 #define CONFIG_SPL_NAND_MINIMAL
  36 #define CONFIG_SPL_FLUSH_IMAGE
  37 #define CONFIG_SPL_TEXT_BASE            0xff800000
  38 #define CONFIG_SPL_MAX_SIZE             8192
  39 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  40 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
  41 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
  42 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
  43 #endif
  44 #define CONFIG_SPL_PAD_TO               0x20000
  45 #define CONFIG_TPL_PAD_TO               0x20000
  46 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  47 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  48 #endif
  49
  50 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  51 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  52 #endif
  53
  54 #ifdef CONFIG_SPL_BUILD
  55 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
  56 #else
  57 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  58 #endif
  59
  60 #ifdef CONFIG_SPL_BUILD
  61 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
  62 #endif
  63
  64 /* High Level Configuration Options */
  65 #define CONFIG_SYS_HAS_SERDES           /* common SERDES init code */
  66
  67 #ifdef CONFIG_PCI
  68 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
  69 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  70 #define CONFIG_PCI_INDIRECT_BRIDGE
  71 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
  72 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  73
  74 /*
  75  * PCI Windows
  76  * Memory space is mapped 1-1, but I/O space must start from 0.
  77  */
  78 /* controller 1, Slot 1, tgtid 1, Base address a000 */
  79 #define CONFIG_SYS_PCIE1_NAME           "Slot 1"
  80 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
  81 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
  82 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
  83 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
  84 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
  85 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
  86 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
  87 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
  88
  89 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
  90 #endif
  91
  92 #define CONFIG_TSEC_ENET
  93 #define CONFIG_ENV_OVERWRITE
  94
  95 #define CONFIG_DDR_CLK_FREQ     100000000
  96 #define CONFIG_SYS_CLK_FREQ     66666666
  97
  98 #define CONFIG_HWCONFIG
  99
 100 /*
 101  * These can be toggled for performance analysis, otherwise use default.
 102  */
 103 #define CONFIG_L2_CACHE                 /* toggle L2 cache */
 104 #define CONFIG_BTB                      /* toggle branch predition */
 105
 106
 107 #define CONFIG_ENABLE_36BIT_PHYS
 108
 109 #define CONFIG_ADDR_MAP                 1
 110 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 111
 112 #define CONFIG_SYS_MEMTEST_START        0x00200000
 113 #define CONFIG_SYS_MEMTEST_END          0x00400000
 114
 115 /* DDR Setup */
 116 #define CONFIG_DDR_SPD
 117 #define CONFIG_SYS_SPD_BUS_NUM          0
 118 #define SPD_EEPROM_ADDRESS              0x50
 119 #define CONFIG_SYS_DDR_RAW_TIMING
 120
 121 /* DDR ECC Setup*/
 122 #define CONFIG_DDR_ECC
 123 #define CONFIG_MEM_INIT_VALUE           0xDeadBeef
 124 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 125
 126 #define CONFIG_SYS_SDRAM_SIZE           512
 127 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 128 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 129
 130 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 131 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 132
 133 #define CONFIG_SYS_CCSRBAR              0xffe00000
 134 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 135
 136 /* Platform SRAM setting  */
 137 #define CONFIG_SYS_PLATFORM_SRAM_BASE   0xffb00000
 138 #define CONFIG_SYS_PLATFORM_SRAM_BASE_PHYS \
 139                         (0xf00000000ull | CONFIG_SYS_PLATFORM_SRAM_BASE)
 140 #define CONFIG_SYS_PLATFORM_SRAM_SIZE   (512 << 10)
 141
 142 /*
 143  * IFC Definitions
 144  */
 145 /* NOR Flash on IFC */
 146 #define CONFIG_SYS_FLASH_BASE           0xec000000
 147 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 148
 149 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 150
 151 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE_PHYS }
 152 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 153
 154 #define CONFIG_SYS_FLASH_QUIET_TEST
 155 #define CONFIG_FLASH_SHOW_PROGRESS      45
 156 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* in ms */
 157 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* in ms */
 158
 159 /* 16Bit NOR Flash - S29GL512S10TFI01 */
 160 #define CONFIG_SYS_NOR_CSPR     (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 161                                 CSPR_PORT_SIZE_16 | \
 162                                 CSPR_MSEL_NOR | \
 163                                 CSPR_V)
 164 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(64*1024*1024)
 165 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(4)
 166
 167 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 168                                 FTIM0_NOR_TEADC(0x5) | \
 169                                 FTIM0_NOR_TEAHC(0x5))
 170 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 171                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 172                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 173 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 174                                 FTIM2_NOR_TCH(0x4) | \
 175                                 FTIM2_NOR_TWPH(0x0E) | \
 176                                 FTIM2_NOR_TWP(0x1c))
 177 #define CONFIG_SYS_NOR_FTIM3    0x0
 178
 179 /* CFI for NOR Flash */
 180 #define CONFIG_FLASH_CFI_DRIVER
 181 #define CONFIG_SYS_FLASH_CFI
 182 #define CONFIG_SYS_FLASH_EMPTY_INFO
 183 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 184
 185 /* NAND Flash on IFC */
 186 #define CONFIG_NAND_FSL_IFC
 187 #define CONFIG_SYS_NAND_BASE            0xff800000
 188 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 189
 190 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 191
 192 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 193 #define CONFIG_SYS_NAND_BLOCK_SIZE      (1024 * 1024)
 194
 195 /* 8Bit NAND Flash - K9F1G08U0B */
 196 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 197                                 | CSPR_PORT_SIZE_8 \
 198                                 | CSPR_MSEL_NAND \
 199                                 | CSPR_V)
 200 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 201 #define CONFIG_SYS_NAND_OOBSIZE 0x00000280      /* 640b */
 202 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 203                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 204                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 205                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
 206                                 | CSOR_NAND_PGS_8K      /* Page Size = 8K */ \
 207                                 | CSOR_NAND_SPRZ_CSOR_EXT /*oob in csor_ext*/\
 208                                 | CSOR_NAND_PB(128))    /*128 Pages Per Block*/
 209 #define CONFIG_SYS_NAND_FTIM0   (FTIM0_NAND_TCCST(0x01) | \
 210                                 FTIM0_NAND_TWP(0x0c)   | \
 211                                 FTIM0_NAND_TWCHT(0x08) | \
 212                                 FTIM0_NAND_TWH(0x06))
 213 #define CONFIG_SYS_NAND_FTIM1   (FTIM1_NAND_TADLE(0x28) | \
 214                                 FTIM1_NAND_TWBE(0x1d)  | \
 215                                 FTIM1_NAND_TRR(0x08)   | \
 216                                 FTIM1_NAND_TRP(0x0c))
 217 #define CONFIG_SYS_NAND_FTIM2   (FTIM2_NAND_TRAD(0x0c) | \
 218                                 FTIM2_NAND_TREH(0x0a) | \
 219                                 FTIM2_NAND_TWHRE(0x18))
 220 #define CONFIG_SYS_NAND_FTIM3   (FTIM3_NAND_TWW(0x04))
 221
 222 #define CONFIG_SYS_NAND_DDR_LAW         11
 223
 224 /* Set up IFC registers for boot location NOR/NAND */
 225 #ifdef CONFIG_NAND
 226 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 227 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 228 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 229 #define CONFIG_SYS_CSOR0_EXT            CONFIG_SYS_NAND_OOBSIZE
 230 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 231 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 232 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 233 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 234 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR_CSPR
 235 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 236 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 237 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 238 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 239 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 240 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 241 #else
 242 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR_CSPR
 243 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 244 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 245 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 246 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 247 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 248 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 249 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NAND_CSPR
 250 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NAND_AMASK
 251 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NAND_CSOR
 252 #define CONFIG_SYS_CSOR1_EXT            CONFIG_SYS_NAND_OOBSIZE
 253 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NAND_FTIM0
 254 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NAND_FTIM1
 255 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NAND_FTIM2
 256 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NAND_FTIM3
 257 #endif
 258
 259 /* CPLD on IFC, selected by CS2 */
 260 #define CONFIG_SYS_CPLD_BASE            0xffdf0000
 261 #define CONFIG_SYS_CPLD_BASE_PHYS       (0xf00000000ull \
 262                                         | CONFIG_SYS_CPLD_BASE)
 263
 264 #define CONFIG_SYS_CSPR2        (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \
 265                                 | CSPR_PORT_SIZE_8 \
 266                                 | CSPR_MSEL_GPCM \
 267                                 | CSPR_V)
 268 #define CONFIG_SYS_AMASK2       IFC_AMASK(64*1024)
 269 #define CONFIG_SYS_CSOR2        0x0
 270 /* CPLD Timing parameters for IFC CS2 */
 271 #define CONFIG_SYS_CS2_FTIM0    (FTIM0_GPCM_TACSE(0x0e) | \
 272                                 FTIM0_GPCM_TEADC(0x0e) | \
 273                                 FTIM0_GPCM_TEAHC(0x0e))
 274 #define CONFIG_SYS_CS2_FTIM1    (FTIM1_GPCM_TACO(0x0e) | \
 275                                 FTIM1_GPCM_TRAD(0x1f))
 276 #define CONFIG_SYS_CS2_FTIM2    (FTIM2_GPCM_TCS(0x0e) | \
 277                                 FTIM2_GPCM_TCH(0x8) | \
 278                                 FTIM2_GPCM_TWP(0x1f))
 279 #define CONFIG_SYS_CS2_FTIM3    0x0
 280
 281 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 282 #define CONFIG_SYS_RAMBOOT
 283 #define CONFIG_SYS_EXTRA_ENV_RELOC
 284 #endif
 285
 286 #define CONFIG_SYS_INIT_RAM_LOCK
 287 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000
 288 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 289
 290 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE \
 291                                                 - GENERATED_GBL_DATA_SIZE)
 292 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 293
 294 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 295 #define CONFIG_SYS_MALLOC_LEN           (2 * 1024 * 1024)
 296
 297 /*
 298  * Config the L2 Cache as L2 SRAM
 299  */
 300 #if defined(CONFIG_SPL_BUILD)
 301 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 302 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 303 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 304 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 305 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 306 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 307 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 128 * 1024)
 308 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 309 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 160 * 1024)
 310 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (96 << 10)
 311 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 312 #elif defined(CONFIG_NAND)
 313 #ifdef CONFIG_TPL_BUILD
 314 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 315 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 316 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 317 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 318 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 319 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 320 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 321 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 322 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 323 #else
 324 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 325 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 326 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 327 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 328 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x3000)
 329 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 330 #endif
 331 #endif
 332 #endif
 333
 334 /* Serial Port */
 335 #define CONFIG_SYS_NS16550_SERIAL
 336 #define CONFIG_SYS_NS16550_REG_SIZE     1
 337 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 338
 339 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 340 #define CONFIG_NS16550_MIN_FUNCTIONS
 341 #endif
 342
 343 #define CONFIG_SYS_BAUDRATE_TABLE       \
 344         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 345
 346 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 347 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 348
 349 #define CONFIG_SYS_I2C
 350 #define CONFIG_SYS_I2C_FSL
 351 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 352 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 353 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 354 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 355 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 356 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 357
 358 /* I2C EEPROM */
 359 /* enable read and write access to EEPROM */
 360 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
 361 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 362 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 363
 364 /* eSPI - Enhanced SPI */
 365 #define CONFIG_SF_DEFAULT_SPEED         10000000
 366 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 367
 368 #ifdef CONFIG_TSEC_ENET
 369 #define CONFIG_MII                      /* MII PHY management */
 370 #define CONFIG_MII_DEFAULT_TSEC 1       /* Allow unregistered phys */
 371 #define CONFIG_TSEC1            1
 372 #define CONFIG_TSEC1_NAME       "eTSEC1"
 373 #define CONFIG_TSEC2            1
 374 #define CONFIG_TSEC2_NAME       "eTSEC2"
 375
 376 /* Default mode is RGMII mode */
 377 #define TSEC1_PHY_ADDR          0
 378 #define TSEC2_PHY_ADDR          2
 379
 380 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 381 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 382
 383 #define CONFIG_ETHPRIME         "eTSEC1"
 384 #endif  /* CONFIG_TSEC_ENET */
 385
 386 /*
 387  * Environment
 388  */
 389 #if defined(CONFIG_SYS_RAMBOOT)
 390 #if defined(CONFIG_RAMBOOT_SPIFLASH)
 391 #define CONFIG_ENV_SPI_BUS      0
 392 #define CONFIG_ENV_SPI_CS       0
 393 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 394 #define CONFIG_ENV_SPI_MODE     0
 395 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 396 #define CONFIG_ENV_SECT_SIZE    0x10000
 397 #define CONFIG_ENV_SIZE         0x2000
 398 #endif
 399 #elif defined(CONFIG_NAND)
 400 #ifdef CONFIG_TPL_BUILD
 401 #define CONFIG_ENV_SIZE         0x2000
 402 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 403 #else
 404 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 405 #define CONFIG_ENV_RANGE        CONFIG_ENV_SIZE
 406 #endif
 407 #define CONFIG_ENV_OFFSET       CONFIG_SYS_NAND_BLOCK_SIZE
 408 #else
 409 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 410 #define CONFIG_ENV_SIZE         0x2000
 411 #define CONFIG_ENV_SECT_SIZE    0x20000
 412 #endif
 413
 414 #define CONFIG_LOADS_ECHO
 415 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 416
 417 /*
 418  * Miscellaneous configurable options
 419  */
 420 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 421
 422 /*
 423  * For booting Linux, the board info and command line data
 424  * have to be in the first 64 MB of memory, since this is
 425  * the maximum mapped by the Linux kernel during initialization.
 426  */
 427 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20) /* Initial Memory map for Linux */
 428 #define CONFIG_SYS_BOOTM_LEN    (64 << 20) /* Increase max gunzip size */
 429
 430 /*
 431  * Environment Configuration
 432  */
 433
 434 #ifdef CONFIG_TSEC_ENET
 435 #define CONFIG_HAS_ETH0
 436 #define CONFIG_HAS_ETH1
 437 #endif
 438
 439 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 440 #define CONFIG_BOOTFILE         "uImage"
 441 #define CONFIG_UBOOTPATH        u-boot.bin/* U-Boot image on TFTP server */
 442
 443 /* default location for tftp and bootm */
 444 #define CONFIG_LOADADDR         1000000
 445
 446 #define CONFIG_DEF_HWCONFIG     fsl_ddr:ecc=on
 447
 448 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 449         "hwconfig=" __stringify(CONFIG_DEF_HWCONFIG)  "\0"      \
 450         "netdev=eth0\0"                                         \
 451         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 452         "loadaddr=1000000\0"                            \
 453         "consoledev=ttyS0\0"                            \
 454         "ramdiskaddr=2000000\0"                         \
 455         "ramdiskfile=rootfs.ext2.gz.uboot\0"            \
 456         "fdtaddr=1e00000\0"                             \
 457         "fdtfile=name/of/device-tree.dtb\0"                     \
 458         "othbootargs=ramdisk_size=600000\0"             \
 459
 460 #define CONFIG_RAMBOOTCOMMAND                   \
 461         "setenv bootargs root=/dev/ram rw "     \
 462         "console=$consoledev,$baudrate $othbootargs; "  \
 463         "tftp $ramdiskaddr $ramdiskfile;"       \
 464         "tftp $loadaddr $bootfile;"             \
 465         "tftp $fdtaddr $fdtfile;"               \
 466         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 467
 468 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
 469
 470 #include <asm/fsl_secure_boot.h>
 471
 472 #endif  /* __CONFIG_H */