projects / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 765547dc | 1 | /* |
| 4c2e3da8 | 2 | * Copyright (C) 2009 Freescale Semiconductor, Inc. |
| 765547dc HW |
3 | * |
| 4 | * See file CREDITS for list of people who contributed to this | |
| 5 | * project. | |
| 6 | * | |
| 7 | * This program is free software; you can redistribute it and/or | |
| 8 | * modify it under the terms of the GNU General Public License as | |
| 9 | * published by the Free Software Foundation; either version 2 of | |
| 10 | * the License, or (at your option) any later version. | |
| 11 | * | |
| 12 | * This program is distributed in the hope that it will be useful, | |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 15 | * GNU General Public License for more details. | |
| 16 | * | |
| 17 | * You should have received a copy of the GNU General Public License | |
| 18 | * along with this program; if not, write to the Free Software | |
| 19 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 20 | * MA 02111-1307 USA | |
| 21 | */ | |
| 22 | ||
| 23 | /* | |
| 24 | * mpc8569mds board configuration file | |
| 25 | */ | |
| 26 | #ifndef __CONFIG_H | |
| 27 | #define __CONFIG_H | |
| 28 | ||
| 29 | /* High Level Configuration Options */ | |
| 30 | #define CONFIG_BOOKE 1 /* BOOKE */ | |
| 31 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
| 32 | #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */ | |
| 33 | #define CONFIG_MPC8569 1 /* MPC8569 specific */ | |
| 34 | #define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */ | |
| 35 | ||
| 36 | #define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */ | |
| 37 | ||
| 38 | #define CONFIG_PCI 1 /* Disable PCI/PCIE */ | |
| 39 | #define CONFIG_PCIE1 1 /* PCIE controller */ | |
| 40 | #define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */ | |
| 41 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ | |
| 42 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ | |
| 43 | #define CONFIG_QE /* Enable QE */ | |
| 44 | #define CONFIG_ENV_OVERWRITE | |
| 45 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ | |
| 46 | ||
| 765547dc HW |
47 | #ifndef __ASSEMBLY__ |
| 48 | extern unsigned long get_clock_freq(void); | |
| 49 | #endif | |
| 50 | /* Replace a call to get_clock_freq (after it is implemented)*/ | |
| 67351049 DL |
51 | #define CONFIG_SYS_CLK_FREQ 66666666 |
| 52 | #define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ | |
| 765547dc | 53 | |
| c95d541e LY |
54 | #ifdef CONFIG_MK_ATM |
| 55 | #define CONFIG_PQ_MDS_PIB | |
| 56 | #define CONFIG_PQ_MDS_PIB_ATM | |
| 57 | #endif | |
| 58 | ||
| 765547dc HW |
59 | /* |
| 60 | * These can be toggled for performance analysis, otherwise use default. | |
| 61 | */ | |
| 62 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
| 63 | #define CONFIG_BTB /* toggle branch predition */ | |
| 64 | ||
| 674ef7bd LY |
65 | #ifdef CONFIG_MK_NAND |
| 66 | #define CONFIG_NAND_U_BOOT 1 | |
| 67 | #define CONFIG_RAMBOOT_NAND 1 | |
| 68 | #define CONFIG_RAMBOOT_TEXT_BASE 0xf8f82000 | |
| 69 | #endif | |
| 70 | ||
| 765547dc HW |
71 | /* |
| 72 | * Only possible on E500 Version 2 or newer cores. | |
| 73 | */ | |
| 74 | #define CONFIG_ENABLE_36BIT_PHYS 1 | |
| 75 | ||
| 76 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ | |
| 7f52ed5e | 77 | #define CONFIG_HWCONFIG |
| 765547dc HW |
78 | |
| 79 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 80 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
| 81 | ||
| 674ef7bd LY |
82 | /* |
| 83 | * Config the L2 Cache as L2 SRAM | |
| 84 | */ | |
| 85 | #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 | |
| 86 | #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR | |
| 87 | #define CONFIG_SYS_L2_SIZE (512 << 10) | |
| 88 | #define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) | |
| 89 | ||
| 765547dc HW |
90 | /* |
| 91 | * Base addresses -- Note these are effective addresses where the | |
| 92 | * actual resources get mapped (not physical addresses) | |
| 93 | */ | |
| 765547dc HW |
94 | #define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ |
| 95 | #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR | |
| 96 | /* physical addr of CCSRBAR */ | |
| 97 | #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR | |
| 98 | /* PQII uses CONFIG_SYS_IMMR */ | |
| 99 | ||
| 674ef7bd LY |
100 | #if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL) |
| 101 | #define CONFIG_SYS_CCSRBAR_DEFAULT CONFIG_SYS_CCSRBAR | |
| 102 | #else | |
| 103 | #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ | |
| 104 | #endif | |
| 105 | ||
| 765547dc HW |
106 | /* DDR Setup */ |
| 107 | #define CONFIG_FSL_DDR3 | |
| 108 | #undef CONFIG_FSL_DDR_INTERACTIVE | |
| 109 | #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/ | |
| 110 | #define CONFIG_DDR_SPD | |
| 111 | #define CONFIG_DDR_DLL /* possible DLL fix needed */ | |
| 112 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ | |
| 113 | ||
| 114 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
| 115 | ||
| 116 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 117 | /* DDR is system memory*/ | |
| 118 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 119 | ||
| 120 | #define CONFIG_NUM_DDR_CONTROLLERS 1 | |
| 121 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 122 | #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) | |
| 123 | ||
| 124 | /* I2C addresses of SPD EEPROMs */ | |
| 125 | #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ | |
| 126 | #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ | |
| 127 | ||
| 128 | /* These are used when DDR doesn't use SPD. */ | |
| 129 | #define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */ | |
| 130 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F | |
| 131 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 | |
| 132 | #define CONFIG_SYS_DDR_TIMING_3 0x00020000 | |
| 133 | #define CONFIG_SYS_DDR_TIMING_0 0x00330004 | |
| 134 | #define CONFIG_SYS_DDR_TIMING_1 0x6F6B4644 | |
| 135 | #define CONFIG_SYS_DDR_TIMING_2 0x002888D0 | |
| 136 | #define CONFIG_SYS_DDR_SDRAM_CFG 0x47000000 | |
| 137 | #define CONFIG_SYS_DDR_SDRAM_CFG_2 0x04401040 | |
| 138 | #define CONFIG_SYS_DDR_SDRAM_MODE 0x40401521 | |
| 139 | #define CONFIG_SYS_DDR_SDRAM_MODE_2 0x8000C000 | |
| 140 | #define CONFIG_SYS_DDR_SDRAM_INTERVAL 0x03E00000 | |
| 141 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
| 142 | #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x01000000 | |
| 143 | #define CONFIG_SYS_DDR_TIMING_4 0x00220001 | |
| 144 | #define CONFIG_SYS_DDR_TIMING_5 0x03402400 | |
| 145 | #define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 | |
| 146 | #define CONFIG_SYS_DDR_WRLVL_CNTL 0x0655A604 | |
| 147 | #define CONFIG_SYS_DDR_CDR_1 0x80040000 | |
| 148 | #define CONFIG_SYS_DDR_CDR_2 0x00000000 | |
| 149 | #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 | |
| 150 | #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 | |
| 151 | #define CONFIG_SYS_DDR_CONTROL 0xc7000000 /* Type = DDR3 */ | |
| 152 | #define CONFIG_SYS_DDR_CONTROL2 0x24400000 | |
| 153 | ||
| 154 | #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d | |
| 155 | #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 | |
| 156 | #define CONFIG_SYS_DDR_SBE 0x00010000 | |
| 157 | ||
| 158 | #undef CONFIG_CLOCKS_IN_MHZ | |
| 159 | ||
| 160 | /* | |
| 161 | * Local Bus Definitions | |
| 162 | */ | |
| 163 | ||
| 164 | #define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */ | |
| 165 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 166 | ||
| 167 | #define CONFIG_SYS_BCSR_BASE 0xf8000000 | |
| 168 | #define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE | |
| 169 | ||
| 170 | /*Chip select 0 - Flash*/ | |
| 674ef7bd LY |
171 | #define CONFIG_FLASH_BR_PRELIM 0xfe000801 |
| 172 | #define CONFIG_FLASH_OR_PRELIM 0xfe000ff7 | |
| 765547dc | 173 | |
| 399b53cb | 174 | /*Chip select 1 - BCSR*/ |
| 765547dc HW |
175 | #define CONFIG_SYS_BR1_PRELIM 0xf8000801 |
| 176 | #define CONFIG_SYS_OR1_PRELIM 0xffffe9f7 | |
| 177 | ||
| 399b53cb HW |
178 | /*Chip select 4 - PIB*/ |
| 179 | #define CONFIG_SYS_BR4_PRELIM 0xf8008801 | |
| 180 | #define CONFIG_SYS_OR4_PRELIM 0xffffe9f7 | |
| 181 | ||
| 182 | /*Chip select 5 - PIB*/ | |
| 183 | #define CONFIG_SYS_BR5_PRELIM 0xf8010801 | |
| 184 | #define CONFIG_SYS_OR5_PRELIM 0xffffe9f7 | |
| 185 | ||
| 765547dc HW |
186 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ |
| 187 | #define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */ | |
| 188 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
| 189 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 190 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 191 | ||
| 192 | #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ | |
| 193 | ||
| 674ef7bd LY |
194 | #if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) |
| 195 | #define CONFIG_SYS_RAMBOOT | |
| 196 | #else | |
| 197 | #undef CONFIG_SYS_RAMBOOT | |
| 198 | #endif | |
| 199 | ||
| 765547dc HW |
200 | #define CONFIG_FLASH_CFI_DRIVER |
| 201 | #define CONFIG_SYS_FLASH_CFI | |
| 202 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 203 | ||
| a29155e1 | 204 | /* Chip select 3 - NAND */ |
| 674ef7bd | 205 | #ifndef CONFIG_NAND_SPL |
| a29155e1 | 206 | #define CONFIG_SYS_NAND_BASE 0xFC000000 |
| 674ef7bd LY |
207 | #else |
| 208 | #define CONFIG_SYS_NAND_BASE 0xFFF00000 | |
| 209 | #endif | |
| 210 | ||
| 211 | /* NAND boot: 4K NAND loader config */ | |
| 212 | #define CONFIG_SYS_NAND_SPL_SIZE 0x1000 | |
| 213 | #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) - 0x2000) | |
| 214 | #define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) | |
| 215 | #define CONFIG_SYS_NAND_U_BOOT_START \ | |
| 216 | (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) | |
| 217 | #define CONFIG_SYS_NAND_U_BOOT_OFFS (0) | |
| 218 | #define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) | |
| 219 | #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) | |
| 220 | ||
| a29155e1 AV |
221 | #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE |
| 222 | #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } | |
| 223 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
| 224 | #define CONFIG_MTD_NAND_VERIFY_WRITE 1 | |
| 225 | #define CONFIG_CMD_NAND 1 | |
| 226 | #define CONFIG_NAND_FSL_ELBC 1 | |
| 227 | #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) | |
| 228 | #define CONFIG_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE_PHYS \ | |
| 229 | | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ | |
| 230 | | BR_PS_8 /* Port Size = 8 bit */ \ | |
| 231 | | BR_MS_FCM /* MSEL = FCM */ \ | |
| 232 | | BR_V) /* valid */ | |
| 233 | #define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ | |
| 234 | | OR_FCM_CSCT \ | |
| 235 | | OR_FCM_CST \ | |
| 236 | | OR_FCM_CHT \ | |
| 237 | | OR_FCM_SCY_1 \ | |
| 238 | | OR_FCM_TRLX \ | |
| 239 | | OR_FCM_EHTR) | |
| 674ef7bd LY |
240 | |
| 241 | #ifdef CONFIG_RAMBOOT_NAND | |
| 242 | #define CONFIG_SYS_BR0_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ | |
| 243 | #define CONFIG_SYS_OR0_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ | |
| 244 | #define CONFIG_SYS_BR3_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 245 | #define CONFIG_SYS_OR3_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ | |
| 246 | #else | |
| 247 | #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 248 | #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ | |
| a29155e1 AV |
249 | #define CONFIG_SYS_BR3_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ |
| 250 | #define CONFIG_SYS_OR3_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ | |
| 674ef7bd | 251 | #endif |
| 765547dc HW |
252 | |
| 253 | /* | |
| 254 | * SDRAM on the LocalBus | |
| 255 | */ | |
| 256 | #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ | |
| 257 | #define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */ | |
| 258 | ||
| 259 | #define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */ | |
| 260 | #define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */ | |
| 261 | #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ | |
| 262 | #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ | |
| 263 | ||
| 264 | #define CONFIG_SYS_INIT_RAM_LOCK 1 | |
| 265 | #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ | |
| 266 | #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ | |
| 267 | ||
| 268 | #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ | |
| 269 | #define CONFIG_SYS_GBL_DATA_OFFSET \ | |
| 270 | (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
| 271 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 272 | ||
| 273 | #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ | |
| fb279490 | 274 | #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ |
| 765547dc HW |
275 | |
| 276 | /* Serial Port */ | |
| 277 | #define CONFIG_CONS_INDEX 1 | |
| 7f52ed5e | 278 | #define CONFIG_SERIAL_MULTI 1 |
| 765547dc HW |
279 | #define CONFIG_SYS_NS16550 |
| 280 | #define CONFIG_SYS_NS16550_SERIAL | |
| 281 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 282 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
| 93341909 KG |
283 | #ifdef CONFIG_NAND_SPL |
| 284 | #define CONFIG_NS16550_MIN_FUNCTIONS | |
| 285 | #endif | |
| 765547dc HW |
286 | |
| 287 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 288 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} | |
| 289 | ||
| 290 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) | |
| 291 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
| 292 | ||
| 293 | /* Use the HUSH parser*/ | |
| 294 | #define CONFIG_SYS_HUSH_PARSER | |
| 295 | #ifdef CONFIG_SYS_HUSH_PARSER | |
| 296 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 297 | #endif | |
| 298 | ||
| 299 | /* pass open firmware flat tree */ | |
| 300 | #define CONFIG_OF_LIBFDT 1 | |
| 301 | #define CONFIG_OF_BOARD_SETUP 1 | |
| 302 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
| 303 | ||
| 765547dc HW |
304 | /* |
| 305 | * I2C | |
| 306 | */ | |
| 307 | #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ | |
| 308 | #define CONFIG_HARD_I2C /* I2C with hardware support*/ | |
| 309 | #undef CONFIG_SOFT_I2C /* I2C bit-banged */ | |
| 310 | #define CONFIG_I2C_MULTI_BUS | |
| 765547dc HW |
311 | #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ |
| 312 | #define CONFIG_SYS_I2C_SLAVE 0x7F | |
| 313 | #define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */ | |
| 314 | #define CONFIG_SYS_I2C_OFFSET 0x3000 | |
| 315 | #define CONFIG_SYS_I2C2_OFFSET 0x3100 | |
| 316 | ||
| 317 | /* | |
| 318 | * I2C2 EEPROM | |
| 319 | */ | |
| 320 | #define CONFIG_ID_EEPROM | |
| 321 | #ifdef CONFIG_ID_EEPROM | |
| 322 | #define CONFIG_SYS_I2C_EEPROM_NXID | |
| 323 | #endif | |
| 324 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 | |
| 325 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 | |
| 326 | #define CONFIG_SYS_EEPROM_BUS_NUM 1 | |
| 327 | ||
| 328 | #define PLPPAR1_I2C_BIT_MASK 0x0000000F | |
| 329 | #define PLPPAR1_I2C2_VAL 0x00000000 | |
| 7f52ed5e | 330 | #define PLPPAR1_ESDHC_VAL 0x0000000A |
| 765547dc HW |
331 | #define PLPDIR1_I2C_BIT_MASK 0x0000000F |
| 332 | #define PLPDIR1_I2C2_VAL 0x0000000F | |
| 7f52ed5e | 333 | #define PLPDIR1_ESDHC_VAL 0x00000006 |
| c4ca10f1 AV |
334 | #define PLPPAR1_UART0_BIT_MASK 0x00000fc0 |
| 335 | #define PLPPAR1_ESDHC_4BITS_VAL 0x00000a80 | |
| 336 | #define PLPDIR1_UART0_BIT_MASK 0x00000fc0 | |
| 337 | #define PLPDIR1_ESDHC_4BITS_VAL 0x00000a80 | |
| 765547dc HW |
338 | |
| 339 | /* | |
| 340 | * General PCI | |
| 341 | * Memory Addresses are mapped 1-1. I/O is mapped from 0 | |
| 342 | */ | |
| 343 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 | |
| 344 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 | |
| 345 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 | |
| 346 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 347 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000 | |
| 348 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 349 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 | |
| 350 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ | |
| 351 | ||
| 352 | #define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000 | |
| 353 | #define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000 | |
| 354 | #define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000 | |
| 355 | ||
| 356 | #ifdef CONFIG_QE | |
| 357 | /* | |
| 358 | * QE UEC ethernet configuration | |
| 359 | */ | |
| f82107f6 HW |
360 | #define CONFIG_SYS_UCC_RGMII_MODE /* Set UCC work at RGMII by default */ |
| 361 | #undef CONFIG_SYS_UCC_RMII_MODE /* Set UCC work at RMII mode */ | |
| 765547dc HW |
362 | |
| 363 | #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) | |
| 364 | #define CONFIG_UEC_ETH | |
| 78b7a8ef | 365 | #define CONFIG_ETHPRIME "UEC0" |
| 765547dc HW |
366 | #define CONFIG_PHY_MODE_NEED_CHANGE |
| 367 | ||
| 368 | #define CONFIG_UEC_ETH1 /* GETH1 */ | |
| 369 | #define CONFIG_HAS_ETH0 | |
| 370 | ||
| 371 | #ifdef CONFIG_UEC_ETH1 | |
| 372 | #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ | |
| 373 | #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE | |
| f82107f6 | 374 | #if defined(CONFIG_SYS_UCC_RGMII_MODE) |
| 765547dc HW |
375 | #define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 |
| 376 | #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH | |
| 377 | #define CONFIG_SYS_UEC1_PHY_ADDR 7 | |
| 582c55a0 HS |
378 | #define CONFIG_SYS_UEC1_INTERFACE_TYPE RGMII_ID |
| 379 | #define CONFIG_SYS_UEC1_INTERFACE_SPEED 1000 | |
| f82107f6 HW |
380 | #elif defined(CONFIG_SYS_UCC_RMII_MODE) |
| 381 | #define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */ | |
| 382 | #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH | |
| 383 | #define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */ | |
| 582c55a0 HS |
384 | #define CONFIG_SYS_UEC1_INTERFACE_TYPE RMII |
| 385 | #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 | |
| f82107f6 HW |
386 | #endif /* CONFIG_SYS_UCC_RGMII_MODE */ |
| 387 | #endif /* CONFIG_UEC_ETH1 */ | |
| 765547dc HW |
388 | |
| 389 | #define CONFIG_UEC_ETH2 /* GETH2 */ | |
| 390 | #define CONFIG_HAS_ETH1 | |
| 391 | ||
| 392 | #ifdef CONFIG_UEC_ETH2 | |
| 393 | #define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ | |
| 394 | #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE | |
| f82107f6 | 395 | #if defined(CONFIG_SYS_UCC_RGMII_MODE) |
| 765547dc HW |
396 | #define CONFIG_SYS_UEC2_TX_CLK QE_CLK17 |
| 397 | #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH | |
| 398 | #define CONFIG_SYS_UEC2_PHY_ADDR 1 | |
| 582c55a0 HS |
399 | #define CONFIG_SYS_UEC2_INTERFACE_TYPE RGMII_ID |
| 400 | #define CONFIG_SYS_UEC2_INTERFACE_SPEED 1000 | |
| f82107f6 HW |
401 | #elif defined(CONFIG_SYS_UCC_RMII_MODE) |
| 402 | #define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */ | |
| 403 | #define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH | |
| 404 | #define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */ | |
| 582c55a0 HS |
405 | #define CONFIG_SYS_UEC2_INTERFACE_TYPE RMII |
| 406 | #define CONFIG_SYS_UEC2_INTERFACE_SPEED 100 | |
| f82107f6 HW |
407 | #endif /* CONFIG_SYS_UCC_RGMII_MODE */ |
| 408 | #endif /* CONFIG_UEC_ETH2 */ | |
| 765547dc | 409 | |
| 750098d3 HW |
410 | #define CONFIG_UEC_ETH3 /* GETH3 */ |
| 411 | #define CONFIG_HAS_ETH2 | |
| 412 | ||
| 413 | #ifdef CONFIG_UEC_ETH3 | |
| 414 | #define CONFIG_SYS_UEC3_UCC_NUM 2 /* UCC3 */ | |
| 415 | #define CONFIG_SYS_UEC3_RX_CLK QE_CLK_NONE | |
| f82107f6 | 416 | #if defined(CONFIG_SYS_UCC_RGMII_MODE) |
| 750098d3 HW |
417 | #define CONFIG_SYS_UEC3_TX_CLK QE_CLK12 |
| 418 | #define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH | |
| 419 | #define CONFIG_SYS_UEC3_PHY_ADDR 2 | |
| 582c55a0 HS |
420 | #define CONFIG_SYS_UEC3_INTERFACE_TYPE RGMII_ID |
| 421 | #define CONFIG_SYS_UEC3_INTERFACE_SPEED 1000 | |
| f82107f6 HW |
422 | #elif defined(CONFIG_SYS_UCC_RMII_MODE) |
| 423 | #define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */ | |
| 424 | #define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH | |
| 425 | #define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */ | |
| 582c55a0 HS |
426 | #define CONFIG_SYS_UEC3_INTERFACE_TYPE RMII |
| 427 | #define CONFIG_SYS_UEC3_INTERFACE_SPEED 100 | |
| f82107f6 HW |
428 | #endif /* CONFIG_SYS_UCC_RGMII_MODE */ |
| 429 | #endif /* CONFIG_UEC_ETH3 */ | |
| 750098d3 HW |
430 | |
| 431 | #define CONFIG_UEC_ETH4 /* GETH4 */ | |
| 432 | #define CONFIG_HAS_ETH3 | |
| 433 | ||
| 434 | #ifdef CONFIG_UEC_ETH4 | |
| 435 | #define CONFIG_SYS_UEC4_UCC_NUM 3 /* UCC4 */ | |
| 436 | #define CONFIG_SYS_UEC4_RX_CLK QE_CLK_NONE | |
| f82107f6 | 437 | #if defined(CONFIG_SYS_UCC_RGMII_MODE) |
| 750098d3 HW |
438 | #define CONFIG_SYS_UEC4_TX_CLK QE_CLK17 |
| 439 | #define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH | |
| 440 | #define CONFIG_SYS_UEC4_PHY_ADDR 3 | |
| 582c55a0 HS |
441 | #define CONFIG_SYS_UEC4_INTERFACE_TYPE RGMII_ID |
| 442 | #define CONFIG_SYS_UEC4_INTERFACE_SPEED 1000 | |
| f82107f6 HW |
443 | #elif defined(CONFIG_SYS_UCC_RMII_MODE) |
| 444 | #define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */ | |
| 445 | #define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH | |
| 446 | #define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */ | |
| 582c55a0 HS |
447 | #define CONFIG_SYS_UEC4_INTERFACE_TYPE RMII |
| 448 | #define CONFIG_SYS_UEC4_INTERFACE_SPEED 100 | |
| f82107f6 HW |
449 | #endif /* CONFIG_SYS_UCC_RGMII_MODE */ |
| 450 | #endif /* CONFIG_UEC_ETH4 */ | |
| 3bd8e532 HW |
451 | |
| 452 | #undef CONFIG_UEC_ETH6 /* GETH6 */ | |
| 453 | #define CONFIG_HAS_ETH5 | |
| 454 | ||
| 455 | #ifdef CONFIG_UEC_ETH6 | |
| 456 | #define CONFIG_SYS_UEC6_UCC_NUM 5 /* UCC6 */ | |
| 457 | #define CONFIG_SYS_UEC6_RX_CLK QE_CLK_NONE | |
| 458 | #define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE | |
| 459 | #define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH | |
| 460 | #define CONFIG_SYS_UEC6_PHY_ADDR 4 | |
| 582c55a0 HS |
461 | #define CONFIG_SYS_UEC6_INTERFACE_TYPE SGMII |
| 462 | #define CONFIG_SYS_UEC6_INTERFACE_SPEED 1000 | |
| 3bd8e532 HW |
463 | #endif /* CONFIG_UEC_ETH6 */ |
| 464 | ||
| 465 | #undef CONFIG_UEC_ETH8 /* GETH8 */ | |
| 466 | #define CONFIG_HAS_ETH7 | |
| 467 | ||
| 468 | #ifdef CONFIG_UEC_ETH8 | |
| 469 | #define CONFIG_SYS_UEC8_UCC_NUM 7 /* UCC8 */ | |
| 470 | #define CONFIG_SYS_UEC8_RX_CLK QE_CLK_NONE | |
| 471 | #define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE | |
| 472 | #define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH | |
| 473 | #define CONFIG_SYS_UEC8_PHY_ADDR 6 | |
| 582c55a0 HS |
474 | #define CONFIG_SYS_UEC8_INTERFACE_TYPE SGMII |
| 475 | #define CONFIG_SYS_UEC8_INTERFACE_SPEED 1000 | |
| 3bd8e532 HW |
476 | #endif /* CONFIG_UEC_ETH8 */ |
| 477 | ||
| 765547dc HW |
478 | #endif /* CONFIG_QE */ |
| 479 | ||
| 480 | #if defined(CONFIG_PCI) | |
| 481 | ||
| 482 | #define CONFIG_NET_MULTI | |
| 483 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
| 484 | ||
| 485 | #undef CONFIG_EEPRO100 | |
| 486 | #undef CONFIG_TULIP | |
| 487 | ||
| 488 | #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 489 | ||
| 490 | #endif /* CONFIG_PCI */ | |
| 491 | ||
| 492 | #ifndef CONFIG_NET_MULTI | |
| 493 | #define CONFIG_NET_MULTI 1 | |
| 494 | #endif | |
| 495 | ||
| 496 | /* | |
| 497 | * Environment | |
| 498 | */ | |
| 674ef7bd LY |
499 | #if defined(CONFIG_SYS_RAMBOOT) |
| 500 | #if defined(CONFIG_RAMBOOT_NAND) | |
| 501 | #define CONFIG_ENV_IS_IN_NAND 1 | |
| 502 | #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE | |
| 503 | #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE) | |
| 504 | #endif | |
| 505 | #else | |
| 765547dc | 506 | #define CONFIG_ENV_IS_IN_FLASH 1 |
| fb279490 | 507 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| 765547dc | 508 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 256K(one sector) for env */ |
| fb279490 | 509 | #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE |
| 674ef7bd | 510 | #endif |
| 765547dc HW |
511 | |
| 512 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
| 513 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ | |
| 514 | ||
| 515 | /* QE microcode/firmware address */ | |
| 516 | #define CONFIG_SYS_QE_FW_ADDR 0xfff00000 | |
| 517 | ||
| 518 | /* | |
| 519 | * BOOTP options | |
| 520 | */ | |
| 521 | #define CONFIG_BOOTP_BOOTFILESIZE | |
| 522 | #define CONFIG_BOOTP_BOOTPATH | |
| 523 | #define CONFIG_BOOTP_GATEWAY | |
| 524 | #define CONFIG_BOOTP_HOSTNAME | |
| 525 | ||
| 526 | ||
| 527 | /* | |
| 528 | * Command line configuration. | |
| 529 | */ | |
| 530 | #include <config_cmd_default.h> | |
| 531 | ||
| 532 | #define CONFIG_CMD_PING | |
| 533 | #define CONFIG_CMD_I2C | |
| 534 | #define CONFIG_CMD_MII | |
| 535 | #define CONFIG_CMD_ELF | |
| 536 | #define CONFIG_CMD_IRQ | |
| 537 | #define CONFIG_CMD_SETEXPR | |
| 199e262e | 538 | #define CONFIG_CMD_REGINFO |
| 765547dc HW |
539 | |
| 540 | #if defined(CONFIG_PCI) | |
| 541 | #define CONFIG_CMD_PCI | |
| 542 | #endif | |
| 543 | ||
| 544 | ||
| 545 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
| 546 | ||
| 7f52ed5e AV |
547 | #define CONFIG_MMC 1 |
| 548 | ||
| 549 | #ifdef CONFIG_MMC | |
| 550 | #define CONFIG_FSL_ESDHC | |
| 551 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 552 | #define CONFIG_CMD_MMC | |
| 553 | #define CONFIG_GENERIC_MMC | |
| 554 | #define CONFIG_CMD_EXT2 | |
| 555 | #define CONFIG_CMD_FAT | |
| 556 | #define CONFIG_DOS_PARTITION | |
| 557 | #endif | |
| 558 | ||
| 765547dc HW |
559 | /* |
| 560 | * Miscellaneous configurable options | |
| 561 | */ | |
| 5be58f5f KP |
562 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| 563 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 564 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
| 765547dc HW |
565 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ |
| 566 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
| 567 | #if defined(CONFIG_CMD_KGDB) | |
| 568 | #define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ | |
| 569 | #else | |
| 570 | #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ | |
| 571 | #endif | |
| 572 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
| 573 | /* Print Buffer Size */ | |
| 574 | #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ | |
| 575 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
| 576 | /* Boot Argument Buffer Size */ | |
| 577 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ | |
| 578 | ||
| 579 | /* | |
| 580 | * For booting Linux, the board info and command line data | |
| 89188a62 | 581 | * have to be in the first 16 MB of memory, since this is |
| 765547dc HW |
582 | * the maximum mapped by the Linux kernel during initialization. |
| 583 | */ | |
| 89188a62 | 584 | #define CONFIG_SYS_BOOTMAPSZ (16 << 20) |
| 765547dc HW |
585 | /* Initial Memory map for Linux*/ |
| 586 | ||
| 587 | /* | |
| 588 | * Internal Definitions | |
| 589 | * | |
| 590 | * Boot Flags | |
| 591 | */ | |
| 592 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
| 593 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
| 594 | ||
| 595 | #if defined(CONFIG_CMD_KGDB) | |
| 596 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
| 597 | #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ | |
| 598 | #endif | |
| 599 | ||
| 600 | /* | |
| 601 | * Environment Configuration | |
| 602 | */ | |
| 603 | #define CONFIG_HOSTNAME mpc8569mds | |
| 604 | #define CONFIG_ROOTPATH /nfsroot | |
| 605 | #define CONFIG_BOOTFILE your.uImage | |
| 606 | ||
| 607 | #define CONFIG_SERVERIP 192.168.1.1 | |
| 608 | #define CONFIG_GATEWAYIP 192.168.1.1 | |
| 609 | #define CONFIG_NETMASK 255.255.255.0 | |
| 610 | ||
| 611 | #define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/ | |
| 612 | ||
| 613 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 614 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ | |
| 615 | ||
| 616 | #define CONFIG_BAUDRATE 115200 | |
| 617 | ||
| 618 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 619 | "netdev=eth0\0" \ | |
| 620 | "consoledev=ttyS0\0" \ | |
| 621 | "ramdiskaddr=600000\0" \ | |
| 622 | "ramdiskfile=your.ramdisk.u-boot\0" \ | |
| 623 | "fdtaddr=400000\0" \ | |
| 624 | "fdtfile=your.fdt.dtb\0" \ | |
| 625 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
| 626 | "nfsroot=$serverip:$rootpath " \ | |
| 627 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 628 | "console=$consoledev,$baudrate $othbootargs\0" \ | |
| 629 | "ramargs=setenv bootargs root=/dev/ram rw " \ | |
| 630 | "console=$consoledev,$baudrate $othbootargs\0" \ | |
| 631 | ||
| 632 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 633 | "run nfsargs;" \ | |
| 634 | "tftp $loadaddr $bootfile;" \ | |
| 635 | "tftp $fdtaddr $fdtfile;" \ | |
| 636 | "bootm $loadaddr - $fdtaddr" | |
| 637 | ||
| 638 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 639 | "run ramargs;" \ | |
| 640 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 641 | "tftp $loadaddr $bootfile;" \ | |
| 642 | "bootm $loadaddr $ramdiskaddr" | |
| 643 | ||
| 644 | #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND | |
| 645 | ||
| 646 | #endif /* __CONFIG_H */ |