[u-boot.git] / include / configs / MPC8569MDS.h

/*
 * Copyright (C) 2009 Freescale Semiconductor, Inc.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * mpc8569mds board configuration file
 */
#ifndef __CONFIG_H
#define __CONFIG_H

/* High Level Configuration Options */
#define CONFIG_BOOKE		1	/* BOOKE */
#define CONFIG_E500		1	/* BOOKE e500 family */
#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48/68 */
#define CONFIG_MPC8569		1	/* MPC8569 specific */
#define CONFIG_MPC8569MDS	1	/* MPC8569MDS board specific */

#define CONFIG_FSL_ELBC		1	/* Has Enhance localbus controller */

#define CONFIG_PCI		1	/* Disable PCI/PCIE */
#define CONFIG_PCIE1		1	/* PCIE controller */
#define CONFIG_FSL_PCI_INIT	1	/* use common fsl pci init code */
#define CONFIG_FSL_PCIE_RESET	1	/* need PCIe reset errata */
#define CONFIG_SYS_PCI_64BIT	1	/* enable 64-bit PCI resources */
#define CONFIG_QE			/* Enable QE */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

/*
 * When initializing flash, if we cannot find the manufacturer ID,
 * assume this is the AMD flash associated with the MDS board.
 * This allows booting from a promjet.
 */
#define CONFIG_ASSUME_AMD_FLASH

#ifndef __ASSEMBLY__
extern unsigned long get_clock_freq(void);
#endif
/* Replace a call to get_clock_freq (after it is implemented)*/
#define CONFIG_SYS_CLK_FREQ	66666666
#define CONFIG_DDR_CLK_FREQ	CONFIG_SYS_CLK_FREQ

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE				/* toggle L2 cache	*/
#define CONFIG_BTB				/* toggle branch predition */

/*
 * Only possible on E500 Version 2 or newer cores.
 */
#define CONFIG_ENABLE_36BIT_PHYS	1

#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
#define CONFIG_HWCONFIG

#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00400000

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
#define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
#define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR
						/* physical addr of CCSRBAR */
#define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR
						/* PQII uses CONFIG_SYS_IMMR */

#define CONFIG_SYS_PCI1_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
#define CONFIG_SYS_PCIE1_ADDR          (CONFIG_SYS_CCSRBAR+0xa000)

/* DDR Setup */
#define CONFIG_FSL_DDR3
#undef CONFIG_FSL_DDR_INTERACTIVE
#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_SPD
#define CONFIG_DDR_DLL			/* possible DLL fix needed */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */

#define CONFIG_MEM_INIT_VALUE	0xDeadBeef

#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
					/* DDR is system memory*/
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)

/* I2C addresses of SPD EEPROMs */
#define SPD_EEPROM_ADDRESS1    0x51    /* CTLR 0 DIMM 0 */
#define SPD_EEPROM_ADDRESS2    0x52    /* CTLR 1 DIMM 0 */

/* These are used when DDR doesn't use SPD.  */
#define CONFIG_SYS_SDRAM_SIZE           1024		/* DDR is 1024MB */
#define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
#define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
#define CONFIG_SYS_DDR_TIMING_3         0x00020000
#define CONFIG_SYS_DDR_TIMING_0         0x00330004
#define CONFIG_SYS_DDR_TIMING_1         0x6F6B4644
#define CONFIG_SYS_DDR_TIMING_2         0x002888D0
#define CONFIG_SYS_DDR_SDRAM_CFG	0x47000000
#define CONFIG_SYS_DDR_SDRAM_CFG_2	0x04401040
#define CONFIG_SYS_DDR_SDRAM_MODE	0x40401521
#define CONFIG_SYS_DDR_SDRAM_MODE_2	0x8000C000
#define CONFIG_SYS_DDR_SDRAM_INTERVAL	0x03E00000
#define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL	0x01000000
#define CONFIG_SYS_DDR_TIMING_4         0x00220001
#define CONFIG_SYS_DDR_TIMING_5         0x03402400
#define CONFIG_SYS_DDR_ZQ_CNTL		0x89080600
#define CONFIG_SYS_DDR_WRLVL_CNTL	0x0655A604
#define CONFIG_SYS_DDR_CDR_1		0x80040000
#define CONFIG_SYS_DDR_CDR_2		0x00000000
#define CONFIG_SYS_DDR_OCD_CTRL         0x00000000
#define CONFIG_SYS_DDR_OCD_STATUS       0x00000000
#define CONFIG_SYS_DDR_CONTROL          0xc7000000      /* Type = DDR3 */
#define CONFIG_SYS_DDR_CONTROL2         0x24400000

#define CONFIG_SYS_DDR_ERR_INT_EN       0x0000000d
#define CONFIG_SYS_DDR_ERR_DIS          0x00000000
#define CONFIG_SYS_DDR_SBE              0x00010000

#undef CONFIG_CLOCKS_IN_MHZ

/*
 * Local Bus Definitions
 */

#define CONFIG_SYS_FLASH_BASE		0xfe000000	/* start of FLASH 32M */
#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE

#define CONFIG_SYS_BCSR_BASE		0xf8000000
#define CONFIG_SYS_BCSR_BASE_PHYS	CONFIG_SYS_BCSR_BASE

/*Chip select 0 - Flash*/
#define CONFIG_SYS_BR0_PRELIM		0xfe000801
#define	CONFIG_SYS_OR0_PRELIM		0xfe000ff7

/*Chip select 1 - BCSR*/
#define CONFIG_SYS_BR1_PRELIM		0xf8000801
#define	CONFIG_SYS_OR1_PRELIM		0xffffe9f7

/*Chip select 4 - PIB*/
#define CONFIG_SYS_BR4_PRELIM		0xf8008801
#define CONFIG_SYS_OR4_PRELIM		0xffffe9f7

/*Chip select 5 - PIB*/
#define CONFIG_SYS_BR5_PRELIM		0xf8010801
#define CONFIG_SYS_OR5_PRELIM		0xffffe9f7

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT	512	/* sectors per device */
#undef	CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */

#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_EMPTY_INFO


/*
 * SDRAM on the LocalBus
 */
#define CONFIG_SYS_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM	 */
#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */

#define CONFIG_SYS_LBC_LCRR	0x00000004	/* LB clock ratio reg */
#define CONFIG_SYS_LBC_LBCR	0x00040000	/* LB config reg */
#define CONFIG_SYS_LBC_LSRT	0x20000000	/* LB sdram refresh timer */
#define CONFIG_SYS_LBC_MRTPR	0x00000000	/* LB refresh timer prescal*/

#define CONFIG_SYS_INIT_RAM_LOCK	1
#define CONFIG_SYS_INIT_RAM_ADDR	0xe4010000  /* Initial RAM address */
#define CONFIG_SYS_INIT_RAM_END	0x4000	    /* End of used area in RAM */

#define CONFIG_SYS_GBL_DATA_SIZE	128	/* num bytes initial data */
#define CONFIG_SYS_GBL_DATA_OFFSET	\
			(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN	(256 * 1024)	/* Reserve 256 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN	(512 * 1024)	/* Reserved for malloc */

/* Serial Port */
#define CONFIG_CONS_INDEX		1
#define CONFIG_SERIAL_MULTI		1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE    1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

#define CONFIG_SYS_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_CCSRBAR+0x4600)

/* Use the HUSH parser*/
#define CONFIG_SYS_HUSH_PARSER
#ifdef  CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#endif

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT		1
#define CONFIG_OF_BOARD_SETUP		1
#define CONFIG_OF_STDOUT_VIA_ALIAS	1

#define CONFIG_SYS_64BIT_VSPRINTF	1
#define CONFIG_SYS_64BIT_STRTOUL	1

/*
 * I2C
 */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C		/* I2C with hardware support*/
#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_I2C_SPEED	400000	/* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE	0x7F
#define CONFIG_SYS_I2C_NOPROBES	{{0,0x69}}	/* Don't probe these addrs */
#define CONFIG_SYS_I2C_OFFSET	0x3000
#define CONFIG_SYS_I2C2_OFFSET	0x3100

/*
 * I2C2 EEPROM
 */
#define CONFIG_ID_EEPROM
#ifdef CONFIG_ID_EEPROM
#define CONFIG_SYS_I2C_EEPROM_NXID
#endif
#define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
#define CONFIG_SYS_EEPROM_BUS_NUM       1

#define PLPPAR1_I2C_BIT_MASK		0x0000000F
#define PLPPAR1_I2C2_VAL		0x00000000
#define PLPPAR1_ESDHC_VAL		0x0000000A
#define PLPDIR1_I2C_BIT_MASK		0x0000000F
#define PLPDIR1_I2C2_VAL		0x0000000F
#define PLPDIR1_ESDHC_VAL		0x00000006

/*
 * General PCI
 * Memory Addresses are mapped 1-1. I/O is mapped from 0
 */
#define CONFIG_SYS_PCIE1_MEM_VIRT	0xa0000000
#define CONFIG_SYS_PCIE1_MEM_BUS	0xa0000000
#define CONFIG_SYS_PCIE1_MEM_PHYS	0xa0000000
#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCIE1_IO_VIRT	0xe2800000
#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
#define CONFIG_SYS_PCIE1_IO_PHYS	0xe2800000
#define CONFIG_SYS_PCIE1_IO_SIZE	0x00800000	/* 8M */

#define CONFIG_SYS_SRIO_MEM_VIRT	0xc0000000
#define CONFIG_SYS_SRIO_MEM_BUS		0xc0000000
#define CONFIG_SYS_SRIO_MEM_PHYS	0xc0000000

#ifdef CONFIG_QE
/*
 * QE UEC ethernet configuration
 */
#define CONFIG_SYS_UCC_RGMII_MODE	/* Set UCC work at RGMII by default */
#undef CONFIG_SYS_UCC_RMII_MODE		/* Set UCC work at RMII mode */

#define CONFIG_MIIM_ADDRESS	(CONFIG_SYS_CCSRBAR + 0x82120)
#define CONFIG_UEC_ETH
#define CONFIG_ETHPRIME         "FSL UEC0"
#define CONFIG_PHY_MODE_NEED_CHANGE

#define CONFIG_UEC_ETH1         /* GETH1 */
#define CONFIG_HAS_ETH0

#ifdef CONFIG_UEC_ETH1
#define CONFIG_SYS_UEC1_UCC_NUM        0       /* UCC1 */
#define CONFIG_SYS_UEC1_RX_CLK         QE_CLK_NONE
#if defined(CONFIG_SYS_UCC_RGMII_MODE)
#define CONFIG_SYS_UEC1_TX_CLK         QE_CLK12
#define CONFIG_SYS_UEC1_ETH_TYPE       GIGA_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR       7
#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC1_TX_CLK         QE_CLK16	/* CLK16 for RMII */
#define CONFIG_SYS_UEC1_ETH_TYPE       FAST_ETH
#define CONFIG_SYS_UEC1_PHY_ADDR       8	/* 0x8 for RMII */
#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_RMII
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH1 */

#define CONFIG_UEC_ETH2         /* GETH2 */
#define CONFIG_HAS_ETH1

#ifdef CONFIG_UEC_ETH2
#define CONFIG_SYS_UEC2_UCC_NUM        1       /* UCC2 */
#define CONFIG_SYS_UEC2_RX_CLK         QE_CLK_NONE
#if defined(CONFIG_SYS_UCC_RGMII_MODE)
#define CONFIG_SYS_UEC2_TX_CLK         QE_CLK17
#define CONFIG_SYS_UEC2_ETH_TYPE       GIGA_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR       1
#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC2_TX_CLK         QE_CLK16	/* CLK 16 for RMII */
#define CONFIG_SYS_UEC2_ETH_TYPE       FAST_ETH
#define CONFIG_SYS_UEC2_PHY_ADDR       0x9	/* 0x9 for RMII */
#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_100_RMII
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH2 */

#define CONFIG_UEC_ETH3         /* GETH3 */
#define CONFIG_HAS_ETH2

#ifdef CONFIG_UEC_ETH3
#define CONFIG_SYS_UEC3_UCC_NUM        2       /* UCC3 */
#define CONFIG_SYS_UEC3_RX_CLK         QE_CLK_NONE
#if defined(CONFIG_SYS_UCC_RGMII_MODE)
#define CONFIG_SYS_UEC3_TX_CLK         QE_CLK12
#define CONFIG_SYS_UEC3_ETH_TYPE       GIGA_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR       2
#define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_1000_RGMII_ID
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC3_TX_CLK		QE_CLK16 /* CLK_16 for RMII */
#define CONFIG_SYS_UEC3_ETH_TYPE	FAST_ETH
#define CONFIG_SYS_UEC3_PHY_ADDR	0xA     /* 0xA for RMII */
#define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_100_RMII
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH3 */

#define CONFIG_UEC_ETH4         /* GETH4 */
#define CONFIG_HAS_ETH3

#ifdef CONFIG_UEC_ETH4
#define CONFIG_SYS_UEC4_UCC_NUM        3       /* UCC4 */
#define CONFIG_SYS_UEC4_RX_CLK         QE_CLK_NONE
#if defined(CONFIG_SYS_UCC_RGMII_MODE)
#define CONFIG_SYS_UEC4_TX_CLK         QE_CLK17
#define CONFIG_SYS_UEC4_ETH_TYPE       GIGA_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR       3
#define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_1000_RGMII_ID
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
#define CONFIG_SYS_UEC4_TX_CLK		QE_CLK16 /* CLK16 for RMII */
#define CONFIG_SYS_UEC4_ETH_TYPE	FAST_ETH
#define CONFIG_SYS_UEC4_PHY_ADDR	0xB     /* 0xB for RMII */
#define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_100_RMII
#endif /* CONFIG_SYS_UCC_RGMII_MODE */
#endif /* CONFIG_UEC_ETH4 */

#undef CONFIG_UEC_ETH6         /* GETH6 */
#define CONFIG_HAS_ETH5

#ifdef CONFIG_UEC_ETH6
#define CONFIG_SYS_UEC6_UCC_NUM        5       /* UCC6 */
#define CONFIG_SYS_UEC6_RX_CLK         QE_CLK_NONE
#define CONFIG_SYS_UEC6_TX_CLK         QE_CLK_NONE
#define CONFIG_SYS_UEC6_ETH_TYPE       GIGA_ETH
#define CONFIG_SYS_UEC6_PHY_ADDR       4
#define CONFIG_SYS_UEC6_INTERFACE_MODE ENET_1000_SGMII
#endif /* CONFIG_UEC_ETH6 */

#undef CONFIG_UEC_ETH8         /* GETH8 */
#define CONFIG_HAS_ETH7

#ifdef CONFIG_UEC_ETH8
#define CONFIG_SYS_UEC8_UCC_NUM        7       /* UCC8 */
#define CONFIG_SYS_UEC8_RX_CLK         QE_CLK_NONE
#define CONFIG_SYS_UEC8_TX_CLK         QE_CLK_NONE
#define CONFIG_SYS_UEC8_ETH_TYPE       GIGA_ETH
#define CONFIG_SYS_UEC8_PHY_ADDR       6
#define CONFIG_SYS_UEC8_INTERFACE_MODE ENET_1000_SGMII
#endif /* CONFIG_UEC_ETH8 */

#endif /* CONFIG_QE */

#if defined(CONFIG_PCI)

#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP			/* do pci plug-and-play */

#undef CONFIG_EEPRO100
#undef CONFIG_TULIP

#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */

#endif	/* CONFIG_PCI */

#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI	1
#endif

/*
 * Environment
 */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SECT_SIZE	0x20000	/* 256K(one sector) for env */
#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */

/* QE microcode/firmware address */
#define CONFIG_SYS_QE_FW_ADDR	0xfff00000

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_SETEXPR

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif


#undef CONFIG_WATCHDOG			/* watchdog disabled */

#define CONFIG_MMC     1

#ifdef CONFIG_MMC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING		/* Command-line editing */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	2048		/* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE	512		/* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
						/* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	32		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
						/* Boot Argument Buffer Size */
#define CONFIG_SYS_HZ	1000		/* decrementer freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 16 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(16 << 20)
					/* Initial Memory map for Linux*/

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/*
 * Environment Configuration
 */
#define CONFIG_HOSTNAME mpc8569mds
#define CONFIG_ROOTPATH  /nfsroot
#define CONFIG_BOOTFILE  your.uImage

#define CONFIG_SERVERIP  192.168.1.1
#define CONFIG_GATEWAYIP 192.168.1.1
#define CONFIG_NETMASK   255.255.255.0

#define CONFIG_LOADADDR  200000   /*default location for tftp and bootm*/

#define CONFIG_BOOTDELAY 10       /* -1 disables auto-boot */
#undef  CONFIG_BOOTARGS           /* the boot command will set bootargs*/

#define CONFIG_BAUDRATE	115200

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"netdev=eth0\0"							\
	"consoledev=ttyS0\0"						\
	"ramdiskaddr=600000\0"						\
	"ramdiskfile=your.ramdisk.u-boot\0"				\
	"fdtaddr=400000\0"						\
	"fdtfile=your.fdt.dtb\0"					\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
	"nfsroot=$serverip:$rootpath "					\
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	"console=$consoledev,$baudrate $othbootargs\0"			\
	"ramargs=setenv bootargs root=/dev/ram rw "			\
	"console=$consoledev,$baudrate $othbootargs\0"			\

#define CONFIG_NFSBOOTCOMMAND						\
	"run nfsargs;"							\
	"tftp $loadaddr $bootfile;"					\
	"tftp $fdtaddr $fdtfile;"					\
	"bootm $loadaddr - $fdtaddr"

#define CONFIG_RAMBOOTCOMMAND						\
	"run ramargs;"							\
	"tftp $ramdiskaddr $ramdiskfile;"				\
	"tftp $loadaddr $bootfile;"					\
	"bootm $loadaddr $ramdiskaddr"

#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
765547dc	1	/*
4c2e3da8	2	* Copyright (C) 2009 Freescale Semiconductor, Inc.
765547dc HW	3	*
	4	* See file CREDITS for list of people who contributed to this
	5	* project.
	6	*
	7	* This program is free software; you can redistribute it and/or
	8	* modify it under the terms of the GNU General Public License as
	9	* published by the Free Software Foundation; either version 2 of
	10	* the License, or (at your option) any later version.
	11	*
	12	* This program is distributed in the hope that it will be useful,
	13	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	14	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	15	* GNU General Public License for more details.
	16	*
	17	* You should have received a copy of the GNU General Public License
	18	* along with this program; if not, write to the Free Software
	19	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	20	* MA 02111-1307 USA
	21	*/
	22
	23	/*
	24	* mpc8569mds board configuration file
	25	*/
	26	#ifndef __CONFIG_H
	27	#define __CONFIG_H
	28
	29	/* High Level Configuration Options */
	30	#define CONFIG_BOOKE 1 /* BOOKE */
	31	#define CONFIG_E500 1 /* BOOKE e500 family */
	32	#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48/68 */
	33	#define CONFIG_MPC8569 1 /* MPC8569 specific */
	34	#define CONFIG_MPC8569MDS 1 /* MPC8569MDS board specific */
	35
	36	#define CONFIG_FSL_ELBC 1 /* Has Enhance localbus controller */
	37
	38	#define CONFIG_PCI 1 /* Disable PCI/PCIE */
	39	#define CONFIG_PCIE1 1 /* PCIE controller */
	40	#define CONFIG_FSL_PCI_INIT 1 /* use common fsl pci init code */
	41	#define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */
	42	#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
	43	#define CONFIG_QE /* Enable QE */
	44	#define CONFIG_ENV_OVERWRITE
	45	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
	46
	47	/*
	48	* When initializing flash, if we cannot find the manufacturer ID,
	49	* assume this is the AMD flash associated with the MDS board.
	50	* This allows booting from a promjet.
	51	*/
	52	#define CONFIG_ASSUME_AMD_FLASH
	53
	54	#ifndef __ASSEMBLY__
	55	extern unsigned long get_clock_freq(void);
	56	#endif
	57	/* Replace a call to get_clock_freq (after it is implemented)*/
67351049 DL	58	#define CONFIG_SYS_CLK_FREQ 66666666
67351049 DL	59	#define CONFIG_DDR_CLK_FREQ CONFIG_SYS_CLK_FREQ
765547dc HW	60
	61	/*
	62	* These can be toggled for performance analysis, otherwise use default.
	63	*/
	64	#define CONFIG_L2_CACHE /* toggle L2 cache */
	65	#define CONFIG_BTB /* toggle branch predition */
	66
	67	/*
	68	* Only possible on E500 Version 2 or newer cores.
	69	*/
	70	#define CONFIG_ENABLE_36BIT_PHYS 1
	71
	72	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
7f52ed5e	73	#define CONFIG_HWCONFIG
765547dc HW	74
	75	#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
	76	#define CONFIG_SYS_MEMTEST_END 0x00400000
	77
	78	/*
	79	* Base addresses -- Note these are effective addresses where the
	80	* actual resources get mapped (not physical addresses)
	81	*/
	82	#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
	83	#define CONFIG_SYS_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
	84	#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR
	85	/* physical addr of CCSRBAR */
	86	#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR
	87	/* PQII uses CONFIG_SYS_IMMR */
	88
	89	#define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000)
	90	#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000)
	91
	92	/* DDR Setup */
	93	#define CONFIG_FSL_DDR3
	94	#undef CONFIG_FSL_DDR_INTERACTIVE
	95	#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
	96	#define CONFIG_DDR_SPD
	97	#define CONFIG_DDR_DLL /* possible DLL fix needed */
	98	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
	99
	100	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	101
	102	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
	103	/* DDR is system memory*/
	104	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	105
	106	#define CONFIG_NUM_DDR_CONTROLLERS 1
	107	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	108	#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
	109
	110	/* I2C addresses of SPD EEPROMs */
	111	#define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */
	112	#define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */
	113
	114	/* These are used when DDR doesn't use SPD. */
	115	#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR is 1024MB */
	116	#define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F
	117	#define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202
	118	#define CONFIG_SYS_DDR_TIMING_3 0x00020000
	119	#define CONFIG_SYS_DDR_TIMING_0 0x00330004
	120	#define CONFIG_SYS_DDR_TIMING_1 0x6F6B4644
	121	#define CONFIG_SYS_DDR_TIMING_2 0x002888D0
	122	#define CONFIG_SYS_DDR_SDRAM_CFG 0x47000000
	123	#define CONFIG_SYS_DDR_SDRAM_CFG_2 0x04401040
	124	#define CONFIG_SYS_DDR_SDRAM_MODE 0x40401521
	125	#define CONFIG_SYS_DDR_SDRAM_MODE_2 0x8000C000
	126	#define CONFIG_SYS_DDR_SDRAM_INTERVAL 0x03E00000
	127	#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
	128	#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL 0x01000000
	129	#define CONFIG_SYS_DDR_TIMING_4 0x00220001
	130	#define CONFIG_SYS_DDR_TIMING_5 0x03402400
	131	#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600
	132	#define CONFIG_SYS_DDR_WRLVL_CNTL 0x0655A604
	133	#define CONFIG_SYS_DDR_CDR_1 0x80040000
	134	#define CONFIG_SYS_DDR_CDR_2 0x00000000
	135	#define CONFIG_SYS_DDR_OCD_CTRL 0x00000000
	136	#define CONFIG_SYS_DDR_OCD_STATUS 0x00000000
	137	#define CONFIG_SYS_DDR_CONTROL 0xc7000000 /* Type = DDR3 */
138	#define CONFIG_SYS_DDR_CONTROL2 0x24400000
139
140	#define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d
141	#define CONFIG_SYS_DDR_ERR_DIS 0x00000000
142	#define CONFIG_SYS_DDR_SBE 0x00010000
143
144	#undef CONFIG_CLOCKS_IN_MHZ
145
146	/*
147	* Local Bus Definitions
148	*/
149
150	#define CONFIG_SYS_FLASH_BASE 0xfe000000 /* start of FLASH 32M */
151	#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
152
153	#define CONFIG_SYS_BCSR_BASE 0xf8000000
154	#define CONFIG_SYS_BCSR_BASE_PHYS CONFIG_SYS_BCSR_BASE
155
156	/Chip select 0 - Flash/
157	#define CONFIG_SYS_BR0_PRELIM 0xfe000801
158	#define CONFIG_SYS_OR0_PRELIM 0xfe000ff7
159
399b53cb	160	/Chip select 1 - BCSR/
765547dc HW	161	#define CONFIG_SYS_BR1_PRELIM 0xf8000801
	162	#define CONFIG_SYS_OR1_PRELIM 0xffffe9f7
	163
399b53cb HW	164	/Chip select 4 - PIB/
	165	#define CONFIG_SYS_BR4_PRELIM 0xf8008801
	166	#define CONFIG_SYS_OR4_PRELIM 0xffffe9f7
	167
	168	/Chip select 5 - PIB/
	169	#define CONFIG_SYS_BR5_PRELIM 0xf8010801
	170	#define CONFIG_SYS_OR5_PRELIM 0xffffe9f7
	171
765547dc HW	172	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
	173	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* sectors per device */
	174	#undef CONFIG_SYS_FLASH_CHECKSUM
	175	#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	176	#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
	177
	178	#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
	179
	180	#define CONFIG_FLASH_CFI_DRIVER
	181	#define CONFIG_SYS_FLASH_CFI
	182	#define CONFIG_SYS_FLASH_EMPTY_INFO
	183
	184
	185	/*
	186	* SDRAM on the LocalBus
	187	*/
	188	#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
	189	#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
	190
	191	#define CONFIG_SYS_LBC_LCRR 0x00000004 /* LB clock ratio reg */
	192	#define CONFIG_SYS_LBC_LBCR 0x00040000 /* LB config reg */
	193	#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
	194	#define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
	195
	196	#define CONFIG_SYS_INIT_RAM_LOCK 1
	197	#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
	198	#define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */
	199
	200	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */
	201	#define CONFIG_SYS_GBL_DATA_OFFSET \
	202	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
	203	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
	204
	205	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
fb279490	206	#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
765547dc HW	207
	208	/* Serial Port */
	209	#define CONFIG_CONS_INDEX 1
7f52ed5e	210	#define CONFIG_SERIAL_MULTI 1
765547dc HW	211	#undef CONFIG_SERIAL_SOFTWARE_FIFO
	212	#define CONFIG_SYS_NS16550
	213	#define CONFIG_SYS_NS16550_SERIAL
	214	#define CONFIG_SYS_NS16550_REG_SIZE 1
	215	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
	216
	217	#define CONFIG_SYS_BAUDRATE_TABLE \
	218	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
	219
	220	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
	221	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
	222
	223	/* Use the HUSH parser*/
	224	#define CONFIG_SYS_HUSH_PARSER
	225	#ifdef CONFIG_SYS_HUSH_PARSER
	226	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	227	#endif
	228
	229	/* pass open firmware flat tree */
	230	#define CONFIG_OF_LIBFDT 1
	231	#define CONFIG_OF_BOARD_SETUP 1
	232	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
	233
	234	#define CONFIG_SYS_64BIT_VSPRINTF 1
	235	#define CONFIG_SYS_64BIT_STRTOUL 1
	236
	237	/*
	238	* I2C
	239	*/
	240	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
	241	#define CONFIG_HARD_I2C /* I2C with hardware support*/
	242	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
	243	#define CONFIG_I2C_MULTI_BUS
765547dc HW	244	#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
	245	#define CONFIG_SYS_I2C_SLAVE 0x7F
	246	#define CONFIG_SYS_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
	247	#define CONFIG_SYS_I2C_OFFSET 0x3000
	248	#define CONFIG_SYS_I2C2_OFFSET 0x3100
	249
	250	/*
	251	* I2C2 EEPROM
	252	*/
	253	#define CONFIG_ID_EEPROM
	254	#ifdef CONFIG_ID_EEPROM
	255	#define CONFIG_SYS_I2C_EEPROM_NXID
	256	#endif
	257	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
	258	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	259	#define CONFIG_SYS_EEPROM_BUS_NUM 1
	260
	261	#define PLPPAR1_I2C_BIT_MASK 0x0000000F
	262	#define PLPPAR1_I2C2_VAL 0x00000000
7f52ed5e	263	#define PLPPAR1_ESDHC_VAL 0x0000000A
765547dc HW	264	#define PLPDIR1_I2C_BIT_MASK 0x0000000F
765547dc HW	265	#define PLPDIR1_I2C2_VAL 0x0000000F
7f52ed5e	266	#define PLPDIR1_ESDHC_VAL 0x00000006
765547dc HW	267
	268	/*
	269	* General PCI
	270	* Memory Addresses are mapped 1-1. I/O is mapped from 0
	271	*/
	272	#define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000
	273	#define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000
	274	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000
	275	#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
	276	#define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000
	277	#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
	278	#define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000
	279	#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */
	280
	281	#define CONFIG_SYS_SRIO_MEM_VIRT 0xc0000000
	282	#define CONFIG_SYS_SRIO_MEM_BUS 0xc0000000
	283	#define CONFIG_SYS_SRIO_MEM_PHYS 0xc0000000
	284
	285	#ifdef CONFIG_QE
	286	/*
	287	* QE UEC ethernet configuration
	288	*/
f82107f6 HW	289	#define CONFIG_SYS_UCC_RGMII_MODE /* Set UCC work at RGMII by default */
f82107f6 HW	290	#undef CONFIG_SYS_UCC_RMII_MODE /* Set UCC work at RMII mode */
765547dc HW	291
	292	#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120)
	293	#define CONFIG_UEC_ETH
	294	#define CONFIG_ETHPRIME "FSL UEC0"
	295	#define CONFIG_PHY_MODE_NEED_CHANGE
	296
	297	#define CONFIG_UEC_ETH1 /* GETH1 */
	298	#define CONFIG_HAS_ETH0
	299
	300	#ifdef CONFIG_UEC_ETH1
	301	#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */
	302	#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE
f82107f6	303	#if defined(CONFIG_SYS_UCC_RGMII_MODE)
765547dc HW	304	#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12
	305	#define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH
	306	#define CONFIG_SYS_UEC1_PHY_ADDR 7
	307	#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID
f82107f6 HW	308	#elif defined(CONFIG_SYS_UCC_RMII_MODE)
	309	#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */
	310	#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH
	311	#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */
	312	#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_RMII
	313	#endif /* CONFIG_SYS_UCC_RGMII_MODE */
	314	#endif /* CONFIG_UEC_ETH1 */
765547dc HW	315
	316	#define CONFIG_UEC_ETH2 /* GETH2 */
	317	#define CONFIG_HAS_ETH1
	318
	319	#ifdef CONFIG_UEC_ETH2
	320	#define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */
	321	#define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE
f82107f6	322	#if defined(CONFIG_SYS_UCC_RGMII_MODE)
765547dc HW	323	#define CONFIG_SYS_UEC2_TX_CLK QE_CLK17
	324	#define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH
	325	#define CONFIG_SYS_UEC2_PHY_ADDR 1
	326	#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID
f82107f6 HW	327	#elif defined(CONFIG_SYS_UCC_RMII_MODE)
	328	#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */
	329	#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH
	330	#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */
	331	#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_100_RMII
	332	#endif /* CONFIG_SYS_UCC_RGMII_MODE */
	333	#endif /* CONFIG_UEC_ETH2 */
765547dc	334
750098d3 HW	335	#define CONFIG_UEC_ETH3 /* GETH3 */
	336	#define CONFIG_HAS_ETH2
	337
	338	#ifdef CONFIG_UEC_ETH3
	339	#define CONFIG_SYS_UEC3_UCC_NUM 2 /* UCC3 */
	340	#define CONFIG_SYS_UEC3_RX_CLK QE_CLK_NONE
f82107f6	341	#if defined(CONFIG_SYS_UCC_RGMII_MODE)
750098d3 HW	342	#define CONFIG_SYS_UEC3_TX_CLK QE_CLK12
	343	#define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH
	344	#define CONFIG_SYS_UEC3_PHY_ADDR 2
	345	#define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_1000_RGMII_ID
f82107f6 HW	346	#elif defined(CONFIG_SYS_UCC_RMII_MODE)
	347	#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */
	348	#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH
	349	#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */
	350	#define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_100_RMII
	351	#endif /* CONFIG_SYS_UCC_RGMII_MODE */
	352	#endif /* CONFIG_UEC_ETH3 */
750098d3 HW	353
	354	#define CONFIG_UEC_ETH4 /* GETH4 */
	355	#define CONFIG_HAS_ETH3
	356
	357	#ifdef CONFIG_UEC_ETH4
	358	#define CONFIG_SYS_UEC4_UCC_NUM 3 /* UCC4 */
	359	#define CONFIG_SYS_UEC4_RX_CLK QE_CLK_NONE
f82107f6	360	#if defined(CONFIG_SYS_UCC_RGMII_MODE)
750098d3 HW	361	#define CONFIG_SYS_UEC4_TX_CLK QE_CLK17
	362	#define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH
	363	#define CONFIG_SYS_UEC4_PHY_ADDR 3
	364	#define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_1000_RGMII_ID
f82107f6 HW	365	#elif defined(CONFIG_SYS_UCC_RMII_MODE)
	366	#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */
	367	#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH
	368	#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */
	369	#define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_100_RMII
	370	#endif /* CONFIG_SYS_UCC_RGMII_MODE */
	371	#endif /* CONFIG_UEC_ETH4 */
3bd8e532 HW	372
	373	#undef CONFIG_UEC_ETH6 /* GETH6 */
	374	#define CONFIG_HAS_ETH5
	375
	376	#ifdef CONFIG_UEC_ETH6
	377	#define CONFIG_SYS_UEC6_UCC_NUM 5 /* UCC6 */
	378	#define CONFIG_SYS_UEC6_RX_CLK QE_CLK_NONE
	379	#define CONFIG_SYS_UEC6_TX_CLK QE_CLK_NONE
	380	#define CONFIG_SYS_UEC6_ETH_TYPE GIGA_ETH
	381	#define CONFIG_SYS_UEC6_PHY_ADDR 4
	382	#define CONFIG_SYS_UEC6_INTERFACE_MODE ENET_1000_SGMII
	383	#endif /* CONFIG_UEC_ETH6 */
	384
	385	#undef CONFIG_UEC_ETH8 /* GETH8 */
	386	#define CONFIG_HAS_ETH7
	387
	388	#ifdef CONFIG_UEC_ETH8
	389	#define CONFIG_SYS_UEC8_UCC_NUM 7 /* UCC8 */
	390	#define CONFIG_SYS_UEC8_RX_CLK QE_CLK_NONE
	391	#define CONFIG_SYS_UEC8_TX_CLK QE_CLK_NONE
	392	#define CONFIG_SYS_UEC8_ETH_TYPE GIGA_ETH
	393	#define CONFIG_SYS_UEC8_PHY_ADDR 6
	394	#define CONFIG_SYS_UEC8_INTERFACE_MODE ENET_1000_SGMII
	395	#endif /* CONFIG_UEC_ETH8 */
	396
765547dc HW	397	#endif /* CONFIG_QE */
	398
	399	#if defined(CONFIG_PCI)
	400
	401	#define CONFIG_NET_MULTI
	402	#define CONFIG_PCI_PNP /* do pci plug-and-play */
	403
	404	#undef CONFIG_EEPRO100
	405	#undef CONFIG_TULIP
	406
	407	#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	408
	409	#endif /* CONFIG_PCI */
	410
	411	#ifndef CONFIG_NET_MULTI
	412	#define CONFIG_NET_MULTI 1
	413	#endif
	414
	415	/*
	416	* Environment
	417	*/
	418	#define CONFIG_ENV_IS_IN_FLASH 1
fb279490	419	#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
765547dc	420	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 256K(one sector) for env */
fb279490	421	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
765547dc HW	422
	423	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
	424	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
	425
	426	/* QE microcode/firmware address */
	427	#define CONFIG_SYS_QE_FW_ADDR 0xfff00000
	428
	429	/*
	430	* BOOTP options
	431	*/
	432	#define CONFIG_BOOTP_BOOTFILESIZE
	433	#define CONFIG_BOOTP_BOOTPATH
	434	#define CONFIG_BOOTP_GATEWAY
	435	#define CONFIG_BOOTP_HOSTNAME
	436
	437
	438	/*
	439	* Command line configuration.
	440	*/
	441	#include <config_cmd_default.h>
	442
	443	#define CONFIG_CMD_PING
	444	#define CONFIG_CMD_I2C
	445	#define CONFIG_CMD_MII
	446	#define CONFIG_CMD_ELF
	447	#define CONFIG_CMD_IRQ
	448	#define CONFIG_CMD_SETEXPR
	449
	450	#if defined(CONFIG_PCI)
	451	#define CONFIG_CMD_PCI
	452	#endif
	453
	454
	455	#undef CONFIG_WATCHDOG /* watchdog disabled */
	456
7f52ed5e AV	457	#define CONFIG_MMC 1
	458
	459	#ifdef CONFIG_MMC
	460	#define CONFIG_FSL_ESDHC
	461	#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
	462	#define CONFIG_CMD_MMC
	463	#define CONFIG_GENERIC_MMC
	464	#define CONFIG_CMD_EXT2
	465	#define CONFIG_CMD_FAT
	466	#define CONFIG_DOS_PARTITION
	467	#endif
	468
765547dc HW	469	/*
	470	* Miscellaneous configurable options
	471	*/
	472	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	473	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
	474	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
	475	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
	476	#if defined(CONFIG_CMD_KGDB)
	477	#define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */
	478	#else
	479	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	480	#endif
	481	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	482	/* Print Buffer Size */
	483	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	484	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	485	/* Boot Argument Buffer Size */
	486	#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
	487
	488	/*
	489	* For booting Linux, the board info and command line data
89188a62	490	* have to be in the first 16 MB of memory, since this is
765547dc HW	491	* the maximum mapped by the Linux kernel during initialization.
765547dc HW	492	*/
89188a62	493	#define CONFIG_SYS_BOOTMAPSZ (16 << 20)
765547dc HW	494	/* Initial Memory map for Linux*/
	495
	496	/*
	497	* Internal Definitions
	498	*
	499	* Boot Flags
	500	*/
	501	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	502	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	503
	504	#if defined(CONFIG_CMD_KGDB)
	505	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	506	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	507	#endif
	508
	509	/*
	510	* Environment Configuration
	511	*/
	512	#define CONFIG_HOSTNAME mpc8569mds
	513	#define CONFIG_ROOTPATH /nfsroot
	514	#define CONFIG_BOOTFILE your.uImage
	515
	516	#define CONFIG_SERVERIP 192.168.1.1
	517	#define CONFIG_GATEWAYIP 192.168.1.1
	518	#define CONFIG_NETMASK 255.255.255.0
	519
	520	#define CONFIG_LOADADDR 200000 /default location for tftp and bootm/
	521
	522	#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
	523	#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
	524
	525	#define CONFIG_BAUDRATE 115200
	526
	527	#define CONFIG_EXTRA_ENV_SETTINGS \
	528	"netdev=eth0\0" \
	529	"consoledev=ttyS0\0" \
	530	"ramdiskaddr=600000\0" \
	531	"ramdiskfile=your.ramdisk.u-boot\0" \
	532	"fdtaddr=400000\0" \
	533	"fdtfile=your.fdt.dtb\0" \
	534	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	535	"nfsroot=$serverip:$rootpath " \
	536	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	537	"console=$consoledev,$baudrate $othbootargs\0" \
	538	"ramargs=setenv bootargs root=/dev/ram rw " \
	539	"console=$consoledev,$baudrate $othbootargs\0" \
	540
	541	#define CONFIG_NFSBOOTCOMMAND \
	542	"run nfsargs;" \
	543	"tftp $loadaddr $bootfile;" \
	544	"tftp $fdtaddr $fdtfile;" \
	545	"bootm $loadaddr - $fdtaddr"
	546
	547	#define CONFIG_RAMBOOTCOMMAND \
	548	"run ramargs;" \
	549	"tftp $ramdiskaddr $ramdiskfile;" \
	550	"tftp $loadaddr $bootfile;" \
	551	"bootm $loadaddr $ramdiskaddr"
	552
	553	#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
	554
	555	#endif /* __CONFIG_H */