We forward-declare Object typedef in "qemu/typedefs.h" since commit ca27b5eb7cd ("qom/object: Move Object typedef to 'qemu/typedefs.h'").
Use it everywhere to make the code simpler.
Thomas Huth [Mon, 15 Feb 2021 09:02:25 +0000 (10:02 +0100)]
net: Use id_generate() in the network subsystem, too
We already got a global function called id_generate() to create unique
IDs within QEMU. Let's use it in the network subsytem, too, instead of
inventing our own ID scheme here.
The qemu-img.rst, qemu-nbd.rst, virtfs-proxy-helper.rst, qemu-trace-stap.rst,
and virtiofsd.rst manuals were moved to docs/tools, so this update MAINTAINERS
accordingly.
backends/dbus-vmstate: Fix short read error handling
When dbus_vmstate_post_load() fails, it complains to stderr. Except
on short read, where it checks with g_return_val_if_fail(). This
fails silently if G_DISABLE_CHECKS is undefined (it should be), or
else pads the short read with uninitialized bytes.
Replace g_return_val_if_fail() by a proper error check.
Peter Maydell [Tue, 9 Mar 2021 13:50:35 +0000 (13:50 +0000)]
Merge remote-tracking branch 'remotes/mcayland/tags/qemu-sparc-20210307' into staging
qemu-sparc queue
# gpg: Signature made Sun 07 Mar 2021 12:07:13 GMT
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "[email protected]"
# gpg: Good signature from "Mark Cave-Ayland <[email protected]>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-20210307: (42 commits)
esp: add support for unaligned accesses
esp: implement non-DMA transfers in PDMA mode
esp: add trivial implementation of the ESP_RFLAGS register
esp: convert cmdbuf from array to Fifo8
esp: convert ti_buf from array to Fifo8
esp: transition to message out phase after SATN and stop command
esp: add maxlen parameter to get_cmd()
esp: raise interrupt after every non-DMA byte transferred to the FIFO
esp: remove old deferred command completion mechanism
esp: defer command completion interrupt on incoming data transfers
esp: latch individual bits in ESP_RINTR register
esp: implement FIFO flush command
esp: add 4 byte PDMA read and write transfers
esp: remove pdma_origin from ESPState
esp: use FIFO for PDMA transfers between initiator and device
esp: fix PDMA target selection
esp: rename get_cmd_cb() to esp_select()
esp: remove CMD pdma_origin
esp: use in-built TC to determine PDMA transfer length
esp: use ti_wptr/ti_rptr to manage the current FIFO position for PDMA
...
* remotes/bonzini-gitlab/tags/for-upstream: (23 commits)
meson: Stop if cfi is enabled with system slirp
trace: skip qemu_set_log_filename if no "-D" option was passed
trace: fix "-trace file=..."
meson: adjust timeouts for some slower tests
build-sys: invoke ninja with -d keepdepfile
qemu-option: do not suggest using the delay option
scsi: move host_status handling into SCSI drivers
scsi: inline sg_io_sense_from_errno() into the callers.
scsi-generic: do not snoop the output of failed commands
scsi: Add mapping for generic SCSI_HOST status to sense codes
scsi: Rename linux-specific SG_ERR codes to generic SCSI_HOST error codes
qemu-config: add error propagation to qemu_config_parse
x86/pvh: extract only 4 bytes of start address for 32 bit kernels
elf_ops: correct loading of 32 bit PVH kernel
lsilogic: Use PCIDevice::exit instead of DeviceState::unrealize
accel: kvm: Add aligment assert for kvm_log_clear_one_slot
accel: kvm: Fix memory waste under mismatch page size
vl.c: do not execute trace_init_backends() before daemonizing
qom: Check for wellformed id in user_creatable_add_type()
chardev: add nodelay option
...
Peter Maydell [Mon, 8 Mar 2021 11:57:36 +0000 (11:57 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210308' into staging
target-arm queue:
* sbsa-ref: remove cortex-a53 from list of supported cpus
* sbsa-ref: add 'max' to list of allowed cpus
* target/arm: Add support for FEAT_SSBS, Speculative Store Bypass Safe
* npcm7xx: add EMC model
* xlnx-zynqmp: Remove obsolete 'has_rpu' property
* target/arm: Speed up aarch64 TBL/TBX
* virtio-mmio: improve virtio-mmio get_dev_path alog
* target/arm: Use TCF0 and TFSRE0 for unprivileged tag checks
* target/arm: Restrict v8M IDAU to TCG
* target/arm/cpu: Update coding style to make checkpatch.pl happy
* musicpal, tc6393xb, omap_lcdc, tcx: drop dead code for non-32-bit-RGB surfaces
* Add new board: mps3-an524
* remotes/pmaydell/tags/pull-target-arm-20210308: (49 commits)
hw/arm/mps2: Update old infocenter.arm.com URLs
docs/system/arm/mps2.rst: Document the new mps3-an524 board
hw/arm/mps2-tz: Provide PL031 RTC on mps3-an524
hw/arm/mps2-tz: Stub out USB controller for mps3-an524
hw/arm/mps2-tz: Add new mps3-an524 board
hw/arm/mps2-tz: Get armv7m_load_kernel() size argument from RAMInfo
hw/arm/mps2-tz: Support ROMs as well as RAMs
hw/arm/mps2-tz: Set MachineClass default_ram info from RAMInfo data
hw/arm/mps2-tz: Make RAM arrangement board-specific
hw/arm/mps2-tz: Allow boards to have different PPCInfo data
hw/arm/mps2-tz: Size the uart-irq-orgate based on the number of UARTs
hw/arm/mps2-tz: Move device IRQ info to data structures
hw/arm/mps2-tz: Allow PPCPortInfo structures to specify device interrupts
hw/arm/mps2-tz: Correct wrong interrupt numbers for DMA and SPI
hw/misc/mps2-scc: Implement CFG_REG5 and CFG_REG6 for MPS3 AN524
hw/arm/mps2-tz: Make number of IRQs board-specific
hw/arm/mps2-tz: Condition IRQ splitting on number of CPUs, not board type
hw/arm/mps2-tz: Make FPGAIO switch and LED config per-board
hw/misc/mps2-fpgaio: Support SWITCH register
hw/misc/mps2-fpgaio: Make number of LEDs configurable by board
...
Peter Maydell [Mon, 15 Feb 2021 11:51:38 +0000 (11:51 +0000)]
hw/arm/mps2: Update old infocenter.arm.com URLs
Update old infocenter.arm.com URLs to the equivalent developer.arm.com
ones (the old URLs should redirect, but we might as well avoid the
redirection notice, and the new URLs are pleasantly shorter).
This commit covers the links to the MPS2 board TRM, the various
Application Notes, the IoTKit and SSE-200 documents.
Peter Maydell [Mon, 15 Feb 2021 11:51:35 +0000 (11:51 +0000)]
hw/arm/mps2-tz: Stub out USB controller for mps3-an524
The AN524 has a USB controller (an ISP1763); we don't have a model of
it but we should provide a stub "unimplemented-device" for it. This
is slightly complicated because the USB controller shares a PPC port
with the ethernet controller.
Implement a make_* function which provides creates a container
MemoryRegion with both the ethernet controller and an
unimplemented-device stub for the USB controller.
When the MacOS toolbox ROM transfers data from a target device to an unaligned
memory address, the first/last byte of a 16-bit transfer needs to be handled
separately. This means that the first byte is preloaded into the FIFO before
the transfer, or the last byte remains in the FIFO after the transfer.
The result of this is that the PDMA routines must be updated so that the FIFO
is loaded/unloaded if the last 16-bit word is used (rather than the last byte)
and any remaining byte from a FIFO wraparound is handled correctly.
esp: add trivial implementation of the ESP_RFLAGS register
The bottom 5 bits contain the number of bytes remaining in the FIFO which is
trivial to implement with Fifo8 (the remaining bits are unimplemented and left
as 0 for now).
Rename ESP_CMDBUF_SZ to ESP_CMDFIFO_SZ and cmdbuf_cdb_offset to cmdfifo_cdb_offset
to indicate that the command buffer type has changed from an array to a Fifo8.
This also enables us to remove the ESPState field cmdlen since the command length
is now simply the number of elements used in cmdfifo.
esp: transition to message out phase after SATN and stop command
The SCSI bus should remain in the message out phase after the SATN and stop
command rather than transitioning to the command phase. A new ESPState variable
cmdbuf_cdb_offset is added which stores the offset of the CDB from the start
of cmdbuf when accumulating extended message out phase data.
Currently any extended message out data is discarded in do_cmd() before the CDB
is processed in do_busid_cmd().
Some guests use a mixture of DMA and non-DMA transfers in combination with the
SATN and stop command to transfer message out phase and command phase bytes to
the target. Prepare for the next commit by adding a maxlen parameter to
get_cmd() to allow partial transfers.
esp: remove old deferred command completion mechanism
Commit ea84a44250 "scsi: esp: Defer command completion until previous interrupts
have been handled" provided a mechanism to delay the command completion interrupt
until ESP_RINTR is read after the command has completed.
With the previous fixes for latching the ESP_RINTR bits and deferring the setting
of the command completion interrupt for incoming data to the SCSI callback, this
workaround is no longer required and can be removed.
esp: defer command completion interrupt on incoming data transfers
The MacOS toolbox ROM issues a command to the ESP controller as part of its
"FAST" SCSI routines and then proceeds to read the incoming data soon after
receiving the command completion interrupt.
Unfortunately due to SCSI block transfers being asynchronous the incoming data
may not yet be present causing an underflow error. Resolve this by waiting for
the SCSI subsystem transfer_data callback before raising the command completion
interrupt.
Currently the ESP_RINTR register is set to a specific value as required within
the ESP state machine. In order to implement the upcoming deferred interrupt
functionality it is necessary to set individual bits within ESP_RINTR so that
a deferred interrupt will not overwrite the value of any other interrupt bits.
This also requires fixing up a few locations where the ESP_RINTR and ESP_RSEQ
registers are set/reset unexpectedly.
The MacOS toolbox ROM performs 4 byte reads/writes when transferring data to
and from the target. Since the SCSI bus is 16-bits wide, use the memory API
to split a 4 byte access into 2 x 2 byte accesses.
Now that all data is transferred via the FIFO (ti_buf) there is no need to track
the source buffer being used for the data transfer. This also eliminates the
need for a separate subsection for PDMA state migration.
esp: use FIFO for PDMA transfers between initiator and device
PDMA as implemented on the Quadra 800 uses DREQ to load data into the FIFO
up to a maximum of 16 bytes at a time. The MacOS toolbox ROM requires this
because it mixes FIFO and PDMA transfers whilst checking the FIFO status
and counter registers to ensure success.
Currently the target selection for PDMA is done after the SCSI command has been
delivered which is not correct. Perform target selection as part of the initial
get_cmd() call when the command is submitted: if no target is present, don't
raise DRQ.
If the target is present then switch to the command phase since the MacOS toolbox
ROM checks for this before attempting to submit the SCSI command.
The cmdbuf is really just a copy of FIFO data (including extra message phase
bytes) so its pdma_origin is effectively TI. Fortunately we already know when
we are receiving a SCSI command since do_cmd == 1 which enables us to
distinguish between the two cases in esp_pdma_read()/esp_pdma_write().
esp: use in-built TC to determine PDMA transfer length
Real hardware simply counts down using the in-built TC to determine when the
the PDMA request is complete. Use the TC to determine the PDMA transfer length
which then enables us to remove the redundant pdma_len variable.
esp: move PDMA length adjustments into esp_pdma_read()/esp_pdma_write()
Here the updates to async_len and ti_size are moved into the corresponding
esp_pdma_read()/esp_pdma_write() function to eliminate the reference to
pdma_cur in do_dma_pdma_cb().
Now that PDMA SCSI commands are accumulated in cmdbuf in the same way as normal
commands, the existing logic for locating the start of the SCSI command in
cmdbuf via cmdlen can be used. This enables the PDMA-specific pdma_start and
also get_pdma_buf() to be removed.
esp: remove the buf and buflen parameters from get_cmd()
Now that all SCSI commands are accumulated in cmdbuf, remove the buf and buflen
parameters from get_cmd() since these always reference cmdbuf and ESP_CMDBUF_SZ
respectively.
esp: accumulate SCSI commands for PDMA transfers in cmdbuf instead of pdma_buf
ESP SCSI commands are already accumulated in cmdbuf and so there is no need to
keep a separate pdma_buf buffer. Accumulate SCSI commands for PDMA transfers in
cmdbuf instead of pdma_buf so update cmdlen accordingly and change pdma_origin
for PDMA transfers to CMD which allows the PDMA origin to be removed.
This commit also removes a stray memcpy() from get_cmd() which is a no-op because
cmdlen is always zero at the start of a command.
Notionally the removal of pdma_buf from vmstate_esp_pdma also breaks migration
compatibility for the PDMA subsection until its complete removal by the end of
the series.
The ESP device already keeps track of the remaining bytes left to transfer via
its TC (transfer counter) register which is decremented for each byte that
is transferred across the SCSI bus.
Switch the transfer logic to use the value of TC instead of dma_left and then
remove dma_left completely, adding logic to the vmstate_esp post_load() function
to transfer the old dma_left value to the TC register during migration from
older versions.
The value of dma_counter is set once at the start of the transfer and remains
the same until the transfer is complete. This allows the check in esp_transfer_data
to be simplified since dma_left will always be non-zero until the transfer is
completed.
esp: apply transfer length adjustment when STC is zero at TC load time
Perform the length adjustment whereby a value of 0 in the STC represents
a transfer length of 0x10000 at the point where the TC is loaded at the
start of a DMA command rather than just when a TI (Transfer Information)
command is executed. This better matches the description as given in the
datasheet.
esp: determine transfer direction directly from SCSI phase
The transfer direction is currently determined by checking the sign of ti_size
but as this series progresses ti_size can be zero at the end of the transfer.
Use the SCSI phase to determine the transfer direction as used in other SCSI
controller implementations.
The QOM object representing ESPState is currently embedded within both the
SYSBUS_ESP and PCI_ESP devices with migration state handled by embedding
vmstate_esp within each device using VMSTATE_STRUCT.
Since the vmstate_esp fields are embedded directly within the migration
stream, the incoming vmstate_esp version_id is lost. The only version information
available is that from vmstate_sysbus_esp_scsi and vmstate_esp_pci_scsi, but
those versions represent their respective devices and not that of the underlying
ESPState.
Resolve this by adding a new version-dependent field in vmstate_sysbus_esp_scsi
and vmstate_esp_pci_scsi which stores the vmstate_esp version_id field within
ESPState to be used to allow migration from older QEMU versions.
Finally bump the vmstate_esp version to 5 to cover the upcoming ESPState changes
within this patch series.
Commit 3e7a84eeccc ("Hexagon build infrastructure") added Hexagon
definitions that should be poisoned on target independent device
code, but forgot to update "exec/poison.h". Do it now.
Alex Bennée [Wed, 24 Feb 2021 16:58:09 +0000 (16:58 +0000)]
accel/tcg: drop the use of CF_HASH_MASK and rename params
We don't really deal in cf_mask most of the time. The one time it's
relevant is when we want to remove an invalidated TB from the QHT
lookup. Everywhere else we should be looking up things without
CF_INVALID set.
Alex Bennée [Wed, 24 Feb 2021 16:58:08 +0000 (16:58 +0000)]
accel/tcg: move CF_CLUSTER calculation to curr_cflags
There is nothing special about this compile flag that doesn't mean we
can't just compute it with curr_cflags() which we should be using when
building a new set.
Alex Bennée [Wed, 24 Feb 2021 16:58:07 +0000 (16:58 +0000)]
accel/tcg: rename tb_lookup__cpu_state and hoist state extraction
Having a function return either and valid TB and some system state
seems excessive. It will make the subsequent re-factoring easier if we
lookup the current state where we are.
tcg: Manage splitwx in tc_ptr_to_region_tree by hand
The use in tcg_tb_lookup is given a random pc that comes from the pc
of a signal handler. Do not assert that the pointer is already within
the code gen buffer at all, much less the writable mirror of it.
Fixes: db0c51a3803 Signed-off-by: Richard Henderson <[email protected]>
Use the provided cpu_ldst.h interfaces. This fixes the build vs
the unconverted uses of g2h(), adds missed memory trace events,
and correctly recognizes when a SIGSEGV belongs to the guest via
set_helper_retaddr().
The ((bl < 0) ^ sub) condition which negates bl is incorrect and will
always lead to this abort. If the constant is positive, sub will make
it negative; if the constant is negative, sub will keep it negative.
hw/sh4/sh7750_regs: Replace link to license by its full content
This file is borrowed from the RTEMS source code, which comes
with a GPL-2.0-or-later license with a header exception.
Expand the GPL-2.0-or-later license in place to not be dependent
on a 3rd party website. This also fix the misleading comment "The
license and distribution terms for this file may be found in the
file LICENSE in this distribution" referring to the RTEMS distribution
and not to the QEMU one.
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_PCI selector for the SH4 PCI controller.
Move the file with the other PCI host devices in hw/pci-host
and add its missing MAINTAINERS entries.
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_TIMER selector for the SH4 timer control unit.
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_SCI selector for the SH4 serial controller.
We want to be able to use the 'SH4' config for architecture
specific features. Add more fine-grained selection by adding
a CONFIG_SH_INTC selector for the SH4 interrupt controller.
hw/sh4: Add missing Kconfig dependency on SH7750 for the R2D board
r2d_init() calls sh7750_init() so depends on SH7750.Harmless
at the moment because nothing actually uses CONFIG_SH7750
(hw/sh4/meson.build always compiles sh7750.c and sh7750_regnames.c
unconditionally).
projects / qemu.git / log