Replace the old manual dispatch and validation code by the generic one
provided by qapi common code.
Note that it is now possible to call the following commands that used to
be disabled by compile-time conditionals:
- dump-skeys
- query-spice
- rtc-reset-reinjection
- query-gic-capabilities
Their fallback functions return an appropriate "feature disabled" error.
The generated marshal functions do not visit arguments from commands
that take no arguments. Thus they fail to catch invalid
members. Visit the arguments, if provided, to throw an error in case of
invalid members.
Currently, qmp_check_client_args() checks for invalid arguments and
correctly catches this case. When switching to qmp_dispatch() we want to
keep that behaviour. The commands using 'O' may have arbitrary
arguments, and must have 'gen': false in the qapi schema to skip the
generated checks.
The new code closely resembles code for a command with arguments.
Differences:
- the visit of the argument and its cleanup struct don't visit any
members (because there are none).
- the visit of the argument struct and its cleanup are conditional.
Make it possible to call marshallers manually, without going through
qmp_dispatch(). (this is currently only possible in middle-mode, but
it's also useful in general)
We currently define QMP commands in two places: the QAPI schema and
qmp-commands.hx. The latter is preprocessed, the former is not. We
use the preprocessor to suppress configuration-specific commands. For
instance, query-spice is only available #ifdef CONFIG_SPICE.
QMP command dispatch and query-commands use the qmp-commands.hx
definition, and thus obey the #ifdeffery there. Good, because it lets
QMP clients probe for available features more easily.
query-qmp-schema uses the QAPI schema, and thus lists the
configuration-specific commands even when they're unavailable. Not so
good.
We're about to flip command dispatch and query-commands to the
non-middle-mode command registry, which uses the QAPI schema, so we
can ditch qmp-commands.hx. To avoid regressing query-commands,
arrange for commands that are suppressed with the preprocessor now to
be unregistered with that registry. This will keep them unavailable
and out of query-commands when we flip command dispatch and
query-commands to that registry, exactly as before.
This is a hack. The proper solution is to support
configuration-specific commands in the QAPI schema. Mark it FIXME.
Since a few commands are using 'gen': false, they are not registered
automatically by the generator. Register manually instead.
This is in preparation for removal of qapi 'middle' mode generation.
Note that qmp_init_marshal() function isn't run yet, so the commands
aren't actually registered, until module_call_init(MODULE_INIT_QAPI) is
added in a later patch.
handle_qmp_command() will switch to use qmp_dispatch(). It won't have a
pointer to the marshaller function anymore, but only the name of the
command to invoke. Simplify invalid_qmp_mode() so it can just be called
with the command name.
* remotes/rth/tags/pull-tcg-20160916:
tcg: Optimize fence instructions
target-i386: Generate fences for x86
target-aarch64: Generate fences for aarch64
target-arm: Generate fences in ARMv7 frontend
target-alpha: Generate fence op
tcg/tci: Add support for fence
tcg/sparc: Add support for fence
tcg/s390: Add support for fence
tcg/ppc: Add support for fence
tcg/mips: Add support for fence
tcg/ia64: Add support for fence
tcg/arm: Add support for fence
tcg/aarch64: Add support for fence
tcg/i386: Add support for fence
Introduce TCGOpcode for memory barrier
cpu-exec: Check -dfilter for -d cpu
tcg: Merge GETPC and GETRA
tcg: Support arbitrary size + alignment
Pranith Kumar [Tue, 23 Aug 2016 13:48:25 +0000 (09:48 -0400)]
tcg: Optimize fence instructions
This commit optimizes fence instructions. Two optimizations are
currently implemented: (1) unnecessary duplicate fence instructions,
and (2) merging weaker fences into a stronger fence.
[rth: Merge tcg_optimize_mb back into tcg_optimize, so that we only
loop over the opcode stream once. Merge "unrelated" weaker barriers
into one stronger barrier.]
The return address argument to the softmmu template helpers was
confused. In the legacy case, we wanted to indicate that there
is no return address, and so passed in NULL. However, we then
immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero
value, indicating the presence of an (invalid) return address.
Push the GETPC_ADJ subtraction down to the only point it's required:
immediately before use within cpu_restore_state_from_tb, after all
NULL pointer checks have been completed.
This makes GETPC and GETRA identical. Remove GETRA as the lesser
used macro, replacing all uses with GETPC.
Previously we allowed fully unaligned operations, but not operations
that are aligned but with less alignment than the operation size.
In addition, arm32, ia64, mips, and sparc had been omitted from the
previous overalignment patch, which would have led to that alignment
being enforced.
* remotes/bonzini/tags/for-upstream:
pcspk: adding vmstate for save/restore
kvmvapic: fix state change handler
pc: apic: introduce APIC macro
target-i386: Fixed syscall posssible segfault
log: fix parsing of multiple trace:PATTERN log args
qemu-char: avoid segfault if user lacks of permisson of a given logfile
build-sys: add make 'help' target
linux-user: complete omission of removing uses of strdup
target-i386: fix ordering of fields in CPUX86State
pc: apic: fix touch LAPIC when irqchip is split
scsi: pvscsi: limit process IO loop to ring size
memory: remove memory_region_destructor_rom_device
Change net/socket.c to use socket_*() functions
cutils: Rewrite x86 buffer zero checking
scsi: mptsas: use g_new0 to allocate MPTSASRequest object
virtio-scsi: Don't abort when media is ejected
scsi-disk: Cleaning up around tray open state
David Gibson [Thu, 15 Sep 2016 06:11:48 +0000 (16:11 +1000)]
vfio/pci: Fix regression in MSI routing configuration
d1f6af6 "kvm-irqchip: simplify kvm_irqchip_add_msi_route" was a cleanup
of kvmchip routing configuration, that was mostly intended for x86.
However, it also contains a subtle change in behaviour which breaks EEH[1]
error recovery on certain VFIO passthrough devices on spapr guests. So far
it's only been seen on a BCM5719 NIC on a POWER8 server, but there may be
other hardware with the same problem. It's also possible there could be
circumstances where it causes a bug on x86 as well, though I don't know of
any obvious candidates.
Prior to d1f6af6, both vfio_msix_vector_do_use() and
vfio_add_kvm_msi_virq() used msg == NULL as a special flag to mark this
as the "dummy" vector used to make the host hardware state sync with the
guest expected hardware state in terms of MSI configuration.
Specifically that flag caused vfio_add_kvm_msi_virq() to become a no-op,
meaning the dummy irq would always be delivered via qemu. d1f6af6 changed
vfio_add_kvm_msi_virq() so it takes a vector number instead of the msg
parameter, and determines the correct message itself. The test for !msg
was removed, and not replaced with anything there or in the caller.
With an spapr guest which has a VFIO device, if an EEH error occurs on the
host hardware, then the device will be isolated then reset. This is a
combination of host and guest action, mediated by some EEH related
hypercalls. I haven't fully traced the mechanics, but somehow installing
the kvm irqchip route for the dummy irq on the BCM5719 means that after EEH
reset and recovery, at least some irqs are no longer delivered to the
guest.
In particular, the guest never gets the link up event, and so the NIC is
effectively dead.
[1] EEH (Enhanced Error Handling) is an IBM POWER server specific PCI-*
error reporting and recovery mechanism. The concept is somewhat
similar to PCI-E AER, but the details are different.
Eduardo Habkost [Tue, 14 Jun 2016 16:00:23 +0000 (13:00 -0300)]
win32: don't run subprocess tests on Mingw32 platform
On Tue, Jun 14, 2016 at 04:44:57PM +0100, Daniel P. Berrange wrote:
> The g_test_trap_subprocess() method does not work on the
> Mingw32 platform, causing the test-qdev-global-props
> test case to abort
>
> (test-logging.exe:230): GLib-ERROR **: g_test_trap_subprocess()
> failed: Failed to execute helper program (No such file or directory)
>
> This failure was introduced a while ago in
>
> commit 2177801a4899bf29108b3d471417a5b4d701ec29
> Author: Eduardo Habkost <[email protected]>
> Date: Fri Aug 8 16:03:27 2014 -0300
>
> test-qdev-global-props: Run tests on subprocess
>
> Modify the configure time check to avoid enabling this feature
> on Mingw, rather than trying to rewrite the test to avoid this
> feature.
I would do the following instead, just in case we have extra code
looking at $glib_subprocess one day.
When creating new disk backed by remote file accessed via HTTPS and the
backing file has zero length, qemu-img terminates with uniformative
error message:
qemu-img: disk.qcow2: CURL: Error opening file:
While it may not make much sense to operate on empty file, other block
backends (e.g. raw backend for regular files) seem to allow it. This
patch fixes it for the curl backend and improves the reported error.
Thomas Huth [Thu, 11 Aug 2016 07:21:00 +0000 (09:21 +0200)]
ui/console: Fix non-working backspace key in monitor of gtk UI
In the QEMU monitor pane of the gtk user interface, the backspace
key is not working at all. This happens because of a missing mapping
of the key in the qcode_to_keysym[] table. Thus let's add an entry
there to get the backspace key working again.
But some small pieces of the HPPA backend still survived until
today. Since we also do not have support for a HPPA target in
QEMU, we can nowadays safely remove the remaining HPPA parts
(like the disassembler code, or the detection of HPPA in the
configure script).
Andrew Dutcher [Wed, 17 Aug 2016 00:14:55 +0000 (17:14 -0700)]
fpu: add mechanism to check for invalid long double formats
All operations that take a floatx80 as an operand need to have their
inputs checked for malformed encodings. In all of these cases, use the
function floatx80_invalid_encoding to perform the check. If an invalid
operand is found, raise an invalid operation exception, and then return
either NaN (for fp-typed results) or the integer indefinite value (the
minimum representable signed integer value, for int-typed results).
For the non-quiet comparison operations, this touches adjacent code in
order to pass style checks.
Programmingkid [Tue, 16 Aug 2016 02:11:06 +0000 (22:11 -0400)]
ui/cocoa.m: Make a better about dialog
The about dialog in QEMU on Mac OS X is very plain and unhelpful. This patch
makes the about dialog look a lot better and have some descriptive information
on what version of QEMU the user is running.
Peter Maydell [Thu, 15 Sep 2016 09:24:22 +0000 (10:24 +0100)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* minor patches here and there
* MTTCG: lock-free TB lookup
* SCSI: bugfixes for MPTSAS, MegaSAS, LSI53c, vmw_pvscsi
* buffer_is_zero rewrite (except for one patch)
* chardev: qemu_chr_fe_write checks
* checkpatch improvement for markdown preformatted text
* default-configs cleanups
* atomics cleanups
* remotes/bonzini/tags/for-upstream: (58 commits)
cutils: Add generic prefetch
cutils: Add SSE4 version
cutils: Add test for buffer_is_zero
cutils: Remove ppc buffer zero checking
cutils: Remove aarch64 buffer zero checking
cutils: Rearrange buffer_is_zero acceleration
cutils: Export only buffer_is_zero
cutils: Remove SPLAT macro
cutils: Move buffer_is_zero and subroutines to a new file
ppc: do not redefine CPUPPCState
x86/lapic: Load LAPIC state at post_load
optionrom: do not rely on compiler's bswap optimization
checkpatch: Fix whitespace checks for documentation code blocks
atomics: Use __atomic_*_n() variant primitives
atomics: Remove redundant barrier()'s
kvm-all: drop kvm_setup_guest_memory
i8257: Make device "i8257" unavailable with -device
Revert "megasas: remove useless check for cmd->frame"
char: convert qemu_chr_fe_write to qemu_chr_fe_write_all
hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_all
...
Signed-off-by: Peter Maydell <[email protected]>
Conflicts:
cpus.c
tests/Makefile.include
In user-mode emulation env->idt.base memory is
allocated in linux-user/main.c with
size 8*512 = 4096 (for 64-bit).
When fake interrupt EXCP_SYSCALL is thrown
do_interrupt_user checks destination privilege level
for this fake exception, and tries to read 4 bytes
at address base + (256 * 2^4)=4096, that causes
segfault.
Privlege level was checked only for int's, so lets
read dpl from memory only for this case.
as when finding a 'trace:' prefix, it is not clever
enough to strip anything after the next comma. As
a result only the last 'trace:' match ever works.
Rather than trying to be more clever with parsing the
command line arg in place, simplify the code by
using g_strsplit to break it into individual strings
on ','. These resulting pieces can be directly used
without worrying about trailing data from the next
option.
Lin Ma [Wed, 14 Sep 2016 06:22:50 +0000 (14:22 +0800)]
qemu-char: avoid segfault if user lacks of permisson of a given logfile
Function qemu_chr_alloc returns NULL if it failed to open logfile by any reason,
says no write permission. For backends tty, stdio and msmouse, They need to
check this return value to avoid segfault in this case.
From the trace we can see there is an interrupt window exit
after the first interrupt EOI(irq 62), and the same irq(62)
is injected duplicately after the interrupt window.
QEMU does KVM_INTERRUPT(62) ioctl after KVM exits with
KVM_EXIT_IRQ_WINDOW_OPEN, which QEMU requested while the
guest was printing. The printing calls
which later calls cpu_get_pic_interrupt() in kvm_arch_pre_run(),
but that function uses stale information from APIC and injects
62 again. If we synchronized the APIC, then the test would #GP,
because there would be no injectable interrupt in LAPIC or PIC,
so pic_read_irq() would return 15, thinking it was spurious.
This patch fix it by don't touch LAPIC if LAPIC is in kernel.
Vmware Paravirtual SCSI emulator while processing IO requests
could run into an infinite loop if 'pvscsi_ring_pop_req_descr'
always returned positive value. Limit IO loop to the ring size.
Use socket_*() functions from include/qemu/sockets.h instead of
listen()/bind()/connect()/parse_host_port(). socket_*() fucntions are
QAPI based and this patch performs this api conversion since
everything will be using QAPI based sockets in the future. Also add a
helper function socket_address_to_string() in util/qemu-sockets.c
which returns the string representation of socket address. The task was
listed on http://wiki.qemu.org/BiteSizedTasks page.
Li Qiang [Mon, 12 Sep 2016 12:44:11 +0000 (18:14 +0530)]
scsi: mptsas: use g_new0 to allocate MPTSASRequest object
When processing IO request in mptsas, it uses g_new to allocate
a 'req' object. If an error occurs before 'req->sreq' is
allocated, It could lead to an OOB write in mptsas_free_request
function. Use g_new0 to avoid it.
Even if tray is not open, it can be empty (blk_is_inserted() == false).
Handle both cases correctly by replacing the s->tray_open checks with
blk_is_available(), which is an AND of the two.
Also simplify successive checks of them into blk_is_available(), in a
couple cases.
Isaac Lozano [Sat, 6 Aug 2016 10:06:02 +0000 (03:06 -0700)]
usb-mtp: added object properties
Windows uses object properties to determine the size of a file, so to
add object properties, we must also add a minimum set of new commands
and object properties. Most object properties are data that we already
have, except for the unique persistant object identifier. Windows
doesn't use this property, it seems, so we can cheat a bit and just use
the object handle for it.
For ppc64le, gcc6 does extremely poorly with the Altivec code.
Moreover, on POWER7 and POWER8, a hand-optimized Altivec version
turns out to be no faster than the revised integer version, and
therefore not worth the effort.
The revised integer version is 4 times faster than the neon version
on an AppliedMicro Mustang. Even with hand scheduling and additional
unrolling I cannot make any neon version run as fast as the integer.
Since the two users don't make use of the returned offset,
beyond ensuring that the entire buffer is zero, consider the
can_use_buffer_find_nonzero_offset and buffer_find_nonzero_offset
functions internal.
Load the LAPIC state during post_load (rather than when the CPU
starts).
This allows an interrupt to be delivered from the ioapic to
the lapic prior to cpu loading, in particular the RTC that starts
ticking as soon as we load it's state.
Fixes a case where Windows hangs after migration due to RTC interrupts
disappearing.
Paolo Bonzini [Fri, 2 Sep 2016 15:36:23 +0000 (17:36 +0200)]
optionrom: do not rely on compiler's bswap optimization
Recent compilers can detect and inline manually-written bswap code,
but GCC 4.2.1 (the last GPLv2 version) cannot and generates really
awful code. Depending on how the compiler is configured, it might
also not want to generate bswap because it was not in i386. Using
asm is fine because TCG knows about bswap and all processors with
virtualization extensions also do.
checkpatch: Fix whitespace checks for documentation code blocks
Prevent blank lines in documentation code blocks to be signalled as
incorrect trailing whitespace.
Code blocks in documentation are 4-column aligned, and blank lines in
them should have exactly 4 columns of trailing whitespace to prevent
QEMU's wiki to render them as separate code blocks.
Pranith Kumar [Mon, 29 Aug 2016 17:17:01 +0000 (13:17 -0400)]
atomics: Use __atomic_*_n() variant primitives
Use the __atomic_*_n() primitives which take the value as argument. It
is not necessary to store the value locally before calling the
primitive, hence saving us a stack store and load.
Pranith Kumar [Wed, 24 Aug 2016 20:44:23 +0000 (16:44 -0400)]
atomics: Remove redundant barrier()'s
Remove the redundant barrier() after the fence as agreed in previous
discussion here:
https://lists.gnu.org/archive/html/qemu-devel/2016-04/msg00489.html
Cao jin [Mon, 12 Sep 2016 06:34:56 +0000 (14:34 +0800)]
kvm-all: drop kvm_setup_guest_memory
kvm_setup_guest_memory only does "madvise to QEMU_MADV_DONTFORK" and
is only called by ram_block_add, which actually is duplicate code.
Bonus: add simple comment for kvm_has_sync_mmu to make life easier.
projects / qemu.git / log