pci: set memory type for memory behind the bridge

As we make upper bits in IO and prefetcheable memory
registers writeable, we should declare support
for 64 bit prefetcheable memory and 32 bit io
in the bridge.

This changes the default for apb, dec, but I'm guessing
they got the defaults wrong by accident.
Alternatively, we could let bridges declare lack of
64 bit support and make the upper bits read-only zero.

With this applied, we can drop these bits
from express code.

Reported-by: Gerd Hoffmann <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Could someone familiar with apb,dec ack this please?
Signed-off-by: Anthony Liguori <[email protected]>

diff --git a/hw/pci.c b/hw/pci.c
index 678a8c11173496b923a37ab8a9885b3101abee35..bf046bfcad7beb734a5f584cdad07633e8c87789 100644 (file)
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -614,7 +614,7 @@ static void pci_init_w1cmask(PCIDevice *dev)
                  PCI_STATUS_SIG_SYSTEM_ERROR | PCI_STATUS_DETECTED_PARITY);
 }
 
-static void pci_init_wmask_bridge(PCIDevice *d)
+static void pci_init_mask_bridge(PCIDevice *d)
 {
     /* PCI_PRIMARY_BUS, PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS and
        PCI_SEC_LETENCY_TIMER */
@@ -635,6 +635,14 @@ static void pci_init_wmask_bridge(PCIDevice *d)
     /* PCI_PREF_BASE_UPPER32 and PCI_PREF_LIMIT_UPPER32 */
     memset(d->wmask + PCI_PREF_BASE_UPPER32, 0xff, 8);
 
+    /* Supported memory and i/o types */
+    d->config[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_32;
+    d->config[PCI_IO_LIMIT] |= PCI_IO_RANGE_TYPE_32;
+    pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_BASE,
+                               PCI_PREF_RANGE_TYPE_64);
+    pci_word_test_and_set_mask(d->config + PCI_PREF_MEMORY_LIMIT,
+                               PCI_PREF_RANGE_TYPE_64);
+
 /* TODO: add this define to pci_regs.h in linux and then in qemu. */
 #define  PCI_BRIDGE_CTL_VGA_16BIT      0x10    /* VGA 16-bit decode */
 #define  PCI_BRIDGE_CTL_DISCARD                0x100   /* Primary discard timer */
@@ -657,6 +665,9 @@ static void pci_init_wmask_bridge(PCIDevice *d)
      * completeness. */
     pci_set_word(d->w1cmask + PCI_BRIDGE_CONTROL,
                  PCI_BRIDGE_CTL_DISCARD_STATUS);
+    d->cmask[PCI_IO_BASE] |= PCI_IO_RANGE_TYPE_MASK;
+    pci_word_test_and_set_mask(d->cmask + PCI_PREF_MEMORY_BASE,
+                               PCI_PREF_RANGE_TYPE_MASK);
 }
 
 static int pci_init_multifunction(PCIBus *bus, PCIDevice *dev)
@@ -778,7 +789,7 @@ static PCIDevice *do_pci_register_device(PCIDevice *pci_dev, PCIBus *bus,
     pci_init_wmask(pci_dev);
     pci_init_w1cmask(pci_dev);
     if (pc->is_bridge) {
-        pci_init_wmask_bridge(pci_dev);
+        pci_init_mask_bridge(pci_dev);
     }
     if (pci_init_multifunction(bus, pci_dev)) {
         pci_config_free(pci_dev);