s390x/cpumodel: Set up CPU model for AP device support

A new CPU model feature and two new CPU model facilities are
introduced to support AP devices for a KVM guest.

CPU model features:

1. The S390_FEAT_AP CPU model feature indicates whether AP
   instructions are available to the guest. This feature will
   be enabled only if the AP instructions are available on the
   linux host as determined by the availability of the
   KVM_S390_VM_CRYPTO_ENABLE_APIE VM attribute which is exposed
   by KVM only if the AP instructions are available on the
   host.

   This feature must be turned on from userspace to execute AP
   instructions on the KVM guest. The QEMU command line to turn
   this feature on looks something like this:

	qemu-system-s390x ... -cpu xxx,ap=on ...

   This feature will be supported for zEC12 and newer CPU models.
   The feature will not be supported for older models because
   there are few older systems on which to test and the older
   crypto cards will be going out of service in the relatively
   near future.

CPU model facilities:

1. The S390_FEAT_AP_QUERY_CONFIG_INFO feature indicates whether the
   AP Query Configuration Information (QCI) facility is available
   to the guest as determined by whether the facility is available
   on the host. This feature will be exposed by KVM only if the
   QCI facility is installed on the host.

2. The S390_FEAT_AP_FACILITY_TEST feature indicates whether the AP
   Facility Test (APFT) facility is available to the guest as
   determined by whether the facility is available on the host.
   This feature will be exposed by KVM only if APFT is installed
   on the host.

Signed-off-by: Tony Krowiak <[email protected]>
Tested-by: Pierre Morel <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Halil Pasic <[email protected]>
Reviewed-by: Christian Borntraeger <[email protected]>
Tested-by: Christian Borntraeger <[email protected]>
Message-Id: <20181010170309[email protected]>
Signed-off-by: Cornelia Huck <[email protected]>

diff --git a/target/s390x/cpu_features.c b/target/s390x/cpu_features.c
index 172fb18df7182b65e68377fa53626534e28e27d9..60cfeba48f4ec7b9ed46141e139ceb2cc27e9059 100644 (file)
--- a/target/s390x/cpu_features.c
+++ b/target/s390x/cpu_features.c
@@ -39,8 +39,10 @@ static const S390FeatDef s390_features[] = {
     FEAT_INIT("srs", S390_FEAT_TYPE_STFL, 9, "Sense-running-status facility"),
     FEAT_INIT("csske", S390_FEAT_TYPE_STFL, 10, "Conditional-SSKE facility"),
     FEAT_INIT("ctop", S390_FEAT_TYPE_STFL, 11, "Configuration-topology facility"),
+    FEAT_INIT("apqci", S390_FEAT_TYPE_STFL, 12, "Query AP Configuration Information facility"),
     FEAT_INIT("ipter", S390_FEAT_TYPE_STFL, 13, "IPTE-range facility"),
     FEAT_INIT("nonqks", S390_FEAT_TYPE_STFL, 14, "Nonquiescing key-setting facility"),
+    FEAT_INIT("apft", S390_FEAT_TYPE_STFL, 15, "AP Facilities Test facility"),
     FEAT_INIT("etf2", S390_FEAT_TYPE_STFL, 16, "Extended-translation facility 2"),
     FEAT_INIT("msa-base", S390_FEAT_TYPE_STFL, 17, "Message-security-assist facility (excluding subfunctions)"),
     FEAT_INIT("ldisp", S390_FEAT_TYPE_STFL, 18, "Long-displacement facility"),
@@ -129,6 +131,7 @@ static const S390FeatDef s390_features[] = {
 
     FEAT_INIT_MISC("dateh2", "DAT-enhancement facility 2"),
     FEAT_INIT_MISC("cmm", "Collaborative-memory-management facility"),
+    FEAT_INIT_MISC("ap", "AP instructions installed"),
 
     FEAT_INIT("plo-cl", S390_FEAT_TYPE_PLO, 0, "PLO Compare and load (32 bit in general registers)"),
     FEAT_INIT("plo-clg", S390_FEAT_TYPE_PLO, 1, "PLO Compare and load (64 bit in parameter list)"),

diff --git a/target/s390x/cpu_features_def.h b/target/s390x/cpu_features_def.h
index ac2c947f30a8c75c280d68922fbd61bf0dcd8cc6..5fc7e7bf0116fe3a5d9cb27608973381baf08f9e 100644 (file)
--- a/target/s390x/cpu_features_def.h
+++ b/target/s390x/cpu_features_def.h
@@ -27,8 +27,10 @@ typedef enum {
     S390_FEAT_SENSE_RUNNING_STATUS,
     S390_FEAT_CONDITIONAL_SSKE,
     S390_FEAT_CONFIGURATION_TOPOLOGY,
+    S390_FEAT_AP_QUERY_CONFIG_INFO,
     S390_FEAT_IPTE_RANGE,
     S390_FEAT_NONQ_KEY_SETTING,
+    S390_FEAT_AP_FACILITIES_TEST,
     S390_FEAT_EXTENDED_TRANSLATION_2,
     S390_FEAT_MSA,
     S390_FEAT_LONG_DISPLACEMENT,
@@ -119,6 +121,7 @@ typedef enum {
     /* Misc */
     S390_FEAT_DAT_ENH_2,
     S390_FEAT_CMM,
+    S390_FEAT_AP,
 
     /* PLO */
     S390_FEAT_PLO_CL,

diff --git a/target/s390x/cpu_models.c b/target/s390x/cpu_models.c
index 265d25c937bb2a2e1b190765a8e16c146d920f5a..7c253ff308c51b59883e9971612212edeb0f0b45 100644 (file)
--- a/target/s390x/cpu_models.c
+++ b/target/s390x/cpu_models.c
@@ -786,6 +786,8 @@ static void check_consistency(const S390CPUModel *model)
         { S390_FEAT_PRNO_TRNG_QRTCR, S390_FEAT_MSA_EXT_5 },
         { S390_FEAT_PRNO_TRNG, S390_FEAT_MSA_EXT_5 },
         { S390_FEAT_SIE_KSS, S390_FEAT_SIE_F2 },
+        { S390_FEAT_AP_QUERY_CONFIG_INFO, S390_FEAT_AP },
+        { S390_FEAT_AP_FACILITIES_TEST, S390_FEAT_AP },
     };
     int i;
 

diff --git a/target/s390x/gen-features.c b/target/s390x/gen-features.c
index 384b61cd67b9b639e40c240cf269a37ec9a49380..70015eaaf5dfe85d5b1685e5265bbb0625154a26 100644 (file)
--- a/target/s390x/gen-features.c
+++ b/target/s390x/gen-features.c
@@ -447,6 +447,9 @@ static uint16_t full_GEN12_GA1[] = {
     S390_FEAT_ADAPTER_INT_SUPPRESSION,
     S390_FEAT_EDAT_2,
     S390_FEAT_SIDE_EFFECT_ACCESS_ESOP2,
+    S390_FEAT_AP_QUERY_CONFIG_INFO,
+    S390_FEAT_AP_FACILITIES_TEST,
+    S390_FEAT_AP,
 };
 
 static uint16_t full_GEN12_GA2[] = {