pc: Fix CMOS info for drives defined with -device

Drives defined with -drive if=ide get get created along with the IDE
controller, inside machine->init().  That's before cmos_init().
Drives defined with -device get created during generic device init.
That's after cmos_init().  Because of that, CMOS has no information on
them (type, geometry, translation).  Older versions of Windows such as
XP reportedly choke on that.

Split off the part of CMOS initialization that needs to know about
-device devices, and turn it into a reset handler, so it runs after
device creation.

Signed-off-by: Markus Armbruster <[email protected]>
Signed-off-by: Kevin Wolf <[email protected]>

diff --git a/hw/ide.h b/hw/ide.h
index 82b3c11283429feed6bd1d09af23794a31011701..2b5ae7c39e6e9a2147b86c787f8488a705136776 100644 (file)
--- a/hw/ide.h
+++ b/hw/ide.h
@@ -24,4 +24,6 @@ void mmio_ide_init (target_phys_addr_t membase, target_phys_addr_t membase2,
                     qemu_irq irq, int shift,
                     DriveInfo *hd0, DriveInfo *hd1);
 
+void ide_get_bs(BlockDriverState *bs[], BusState *qbus);
+
 #endif /* HW_IDE_H */

diff --git a/hw/ide/qdev.c b/hw/ide/qdev.c
index b34c47333623586746586b9689fd0159c8125bb3..2977a168e5c3f9e1646eec9d11eb177587b2382d 100644 (file)
--- a/hw/ide/qdev.c
+++ b/hw/ide/qdev.c
@@ -88,6 +88,13 @@ IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive)
     return DO_UPCAST(IDEDevice, qdev, dev);
 }
 
+void ide_get_bs(BlockDriverState *bs[], BusState *qbus)
+{
+    IDEBus *bus = DO_UPCAST(IDEBus, qbus, qbus);
+    bs[0] = bus->master ? bus->master->conf.bs : NULL;
+    bs[1] = bus->slave  ? bus->slave->conf.bs  : NULL;
+}
+
 /* --------------------------------- */
 
 typedef struct IDEDrive {

diff --git a/hw/pc.c b/hw/pc.c
index 25ebafac80e9dcfe9981cb6e66659ddfc33cad4f..b577fb1bc6b17a29bb6b1d8a88a146c082ca579d 100644 (file)
--- a/hw/pc.c
+++ b/hw/pc.c
@@ -25,6 +25,7 @@
 #include "pc.h"
 #include "apic.h"
 #include "fdc.h"
+#include "ide.h"
 #include "pci.h"
 #include "vmware_vga.h"
 #include "monitor.h"
@@ -275,14 +276,65 @@ static int pc_boot_set(void *opaque, const char *boot_device)
     return set_boot_dev(opaque, boot_device, 0);
 }
 
-/* hd_table must contain 4 block drivers */
+typedef struct pc_cmos_init_late_arg {
+    ISADevice *rtc_state;
+    BusState *idebus0, *idebus1;
+} pc_cmos_init_late_arg;
+
+static void pc_cmos_init_late(void *opaque)
+{
+    pc_cmos_init_late_arg *arg = opaque;
+    ISADevice *s = arg->rtc_state;
+    int val;
+    BlockDriverState *hd_table[4];
+    int i;
+
+    ide_get_bs(hd_table, arg->idebus0);
+    ide_get_bs(hd_table + 2, arg->idebus1);
+
+    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
+    if (hd_table[0])
+        cmos_init_hd(0x19, 0x1b, hd_table[0], s);
+    if (hd_table[1])
+        cmos_init_hd(0x1a, 0x24, hd_table[1], s);
+
+    val = 0;
+    for (i = 0; i < 4; i++) {
+        if (hd_table[i]) {
+            int cylinders, heads, sectors, translation;
+            /* NOTE: bdrv_get_geometry_hint() returns the physical
+                geometry.  It is always such that: 1 <= sects <= 63, 1
+                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
+                geometry can be different if a translation is done. */
+            translation = bdrv_get_translation_hint(hd_table[i]);
+            if (translation == BIOS_ATA_TRANSLATION_AUTO) {
+                bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
+                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
+                    /* No translation. */
+                    translation = 0;
+                } else {
+                    /* LBA translation. */
+                    translation = 1;
+                }
+            } else {
+                translation--;
+            }
+            val |= translation << (i * 2);
+        }
+    }
+    rtc_set_memory(s, 0x39, val);
+
+    qemu_unregister_reset(pc_cmos_init_late, opaque);
+}
+
 void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
-                  const char *boot_device, DriveInfo **hd_table,
+                  const char *boot_device,
+                  BusState *idebus0, BusState *idebus1,
                   FDCtrl *floppy_controller, ISADevice *s)
 {
     int val;
     int fd0, fd1, nb;
-    int i;
+    static pc_cmos_init_late_arg arg;
 
     /* various important CMOS locations needed by PC/Bochs bios */
 
@@ -351,38 +403,10 @@ void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
     rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
 
     /* hard drives */
-
-    rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
-    if (hd_table[0])
-        cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv, s);
-    if (hd_table[1])
-        cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv, s);
-
-    val = 0;
-    for (i = 0; i < 4; i++) {
-        if (hd_table[i]) {
-            int cylinders, heads, sectors, translation;
-            /* NOTE: bdrv_get_geometry_hint() returns the physical
-                geometry.  It is always such that: 1 <= sects <= 63, 1
-                <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
-                geometry can be different if a translation is done. */
-            translation = bdrv_get_translation_hint(hd_table[i]->bdrv);
-            if (translation == BIOS_ATA_TRANSLATION_AUTO) {
-                bdrv_get_geometry_hint(hd_table[i]->bdrv, &cylinders, &heads, &sectors);
-                if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
-                    /* No translation. */
-                    translation = 0;
-                } else {
-                    /* LBA translation. */
-                    translation = 1;
-                }
-            } else {
-                translation--;
-            }
-            val |= translation << (i * 2);
-        }
-    }
-    rtc_set_memory(s, 0x39, val);
+    arg.rtc_state = s;
+    arg.idebus0 = idebus0;
+    arg.idebus1 = idebus1;
+    qemu_register_reset(pc_cmos_init_late, &arg);
 }
 
 static void handle_a20_line_change(void *opaque, int irq, int level)

diff --git a/hw/pc.h b/hw/pc.h
index ccfd7add99c6c93b7cf746ac47c934319056cd88..63b0249f2fe2e997b8bbb9813b577b4d32effd19 100644 (file)
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -104,7 +104,8 @@ void pc_init_ne2k_isa(NICInfo *nd);
 void pc_audio_init (PCIBus *pci_bus, qemu_irq *pic);
 #endif
 void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
-                  const char *boot_device, DriveInfo **hd_table,
+                  const char *boot_device,
+                  BusState *ide0, BusState *ide1,
                   FDCtrl *floppy_controller, ISADevice *s);
 void pc_pci_device_init(PCIBus *pci_bus);
 

diff --git a/hw/pc_piix.c b/hw/pc_piix.c
index f670fd7a783c52a47c0b182f04f29e3b5995b8f0..519e8a5ccb2e8c22c0e2fb3fa801fcb41b5c0962 100644 (file)
--- a/hw/pc_piix.c
+++ b/hw/pc_piix.c
@@ -79,6 +79,7 @@ static void pc_init1(ram_addr_t ram_size,
     IsaIrqState *isa_irq_state;
     DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
     FDCtrl *floppy_controller;
+    BusState *idebus[MAX_IDE_BUS];
     ISADevice *rtc_state;
 
     pc_cpus_init(cpu_model);
@@ -132,18 +133,23 @@ static void pc_init1(ram_addr_t ram_size,
     }
 
     if (pci_enabled) {
-        pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
+        PCIDevice *dev;
+        dev = pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
+        idebus[0] = qdev_get_child_bus(&dev->qdev, "ide.0");
+        idebus[1] = qdev_get_child_bus(&dev->qdev, "ide.1");
     } else {
         for(i = 0; i < MAX_IDE_BUS; i++) {
-            isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
-                        hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
+            ISADevice *dev;
+            dev = isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
+                               hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
+            idebus[i] = qdev_get_child_bus(&dev->qdev, "ide.0");
         }
     }
 
     pc_audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
 
-    pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd,
-                 floppy_controller, rtc_state);
+    pc_cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device,
+                 idebus[0], idebus[1], floppy_controller, rtc_state);
 
     if (pci_enabled && usb_enabled) {
         usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);