target/arm/kvm: host cpu: Add support for sve<N> properties

Allow cpu 'host' to enable SVE when it's available, unless the
user chooses to disable it with the added 'sve=off' cpu property.
Also give the user the ability to select vector lengths with the
sve<N> properties. We don't adopt 'max' cpu's other sve property,
sve-max-vq, because that property is difficult to use with KVM.
That property assumes all vector lengths in the range from 1 up
to and including the specified maximum length are supported, but
there may be optional lengths not supported by the host in that
range. With KVM one must be more specific when enabling vector
lengths.

Signed-off-by: Andrew Jones <[email protected]>
Reviewed-by: Eric Auger <[email protected]>
Reviewed-by: Richard Henderson <[email protected]>
Tested-by: Masayoshi Mizuma <[email protected]>
Message-id: 20191031142734[email protected]
Signed-off-by: Peter Maydell <[email protected]>

diff --git a/docs/arm-cpu-features.rst b/docs/arm-cpu-features.rst
index bed218d4461948ece6d6342171faaba9b0c49f44..1b367e22e16e272c46ccc86ccc488d3a808ca376 100644 (file)
--- a/docs/arm-cpu-features.rst
+++ b/docs/arm-cpu-features.rst
@@ -272,31 +272,36 @@ SVE CPU Property Examples
 
      $ qemu-system-aarch64 -M virt -cpu max
 
-  3) Only enable the 128-bit vector length::
+  3) When KVM is enabled, implicitly enable all host CPU supported vector
+     lengths with the `host` CPU type::
+
+     $ qemu-system-aarch64 -M virt,accel=kvm -cpu host
+
+  4) Only enable the 128-bit vector length::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve128=on
 
-  4) Disable the 512-bit vector length and all larger vector lengths,
+  5) Disable the 512-bit vector length and all larger vector lengths,
      since 512 is a power-of-two.  This results in all the smaller,
      uninitialized lengths (128, 256, and 384) defaulting to enabled::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve512=off
 
-  5) Enable the 128-bit, 256-bit, and 512-bit vector lengths::
+  6) Enable the 128-bit, 256-bit, and 512-bit vector lengths::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve128=on,sve256=on,sve512=on
 
-  6) The same as (5), but since the 128-bit and 256-bit vector
+  7) The same as (6), but since the 128-bit and 256-bit vector
      lengths are required for the 512-bit vector length to be enabled,
      then allow them to be auto-enabled::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve512=on
 
-  7) Do the same as (6), but by first disabling SVE and then re-enabling it::
+  8) Do the same as (7), but by first disabling SVE and then re-enabling it::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve=off,sve512=on,sve=on
 
-  8) Force errors regarding the last vector length::
+  9) Force errors regarding the last vector length::
 
      $ qemu-system-aarch64 -M virt -cpu max,sve128=off
      $ qemu-system-aarch64 -M virt -cpu max,sve=off,sve128=off,sve=on
@@ -308,5 +313,5 @@ The examples in "SVE CPU Property Examples" exhibit many ways to select
 vector lengths which developers may find useful in order to avoid overly
 verbose command lines.  However, the recommended way to select vector
 lengths is to explicitly enable each desired length.  Therefore only
-example's (1), (3), and (5) exhibit recommended uses of the properties.
+example's (1), (4), and (6) exhibit recommended uses of the properties.
 

diff --git a/target/arm/cpu.c b/target/arm/cpu.c
index 17d1f2b2894df65386915dc13188d3a7b43fe827..7a4ac9339bf9f02b462b79470db67b5481e6b3a4 100644 (file)
--- a/target/arm/cpu.c
+++ b/target/arm/cpu.c
@@ -2670,6 +2670,9 @@ static void arm_host_initfn(Object *obj)
     ARMCPU *cpu = ARM_CPU(obj);
 
     kvm_arm_set_cpu_features_from_host(cpu);
+    if (arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
+        aarch64_add_sve_properties(obj);
+    }
     arm_cpu_post_init(obj);
 }
 

diff --git a/target/arm/cpu.h b/target/arm/cpu.h
index a044d6028b6a6fecc7ef681007d0d9021a800bb9..e1a66a2d1cc0ef4ec47c2034e59cade4da61fcc6 100644 (file)
--- a/target/arm/cpu.h
+++ b/target/arm/cpu.h
@@ -977,11 +977,13 @@ int aarch64_cpu_gdb_write_register(CPUState *cpu, uint8_t *buf, int reg);
 void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq);
 void aarch64_sve_change_el(CPUARMState *env, int old_el,
                            int new_el, bool el0_a64);
+void aarch64_add_sve_properties(Object *obj);
 #else
 static inline void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) { }
 static inline void aarch64_sve_change_el(CPUARMState *env, int o,
                                          int n, bool a)
 { }
+static inline void aarch64_add_sve_properties(Object *obj) { }
 #endif
 
 #if !defined(CONFIG_TCG)

diff --git a/target/arm/cpu64.c b/target/arm/cpu64.c
index c161a146ff0d17b08bb1fa711e846261fcf364bc..68baf0482ffa24cdf540cd737669c62fa1db2aca 100644 (file)
--- a/target/arm/cpu64.c
+++ b/target/arm/cpu64.c
@@ -594,6 +594,21 @@ static void cpu_arm_set_sve(Object *obj, Visitor *v, const char *name,
     cpu->isar.id_aa64pfr0 = t;
 }
 
+void aarch64_add_sve_properties(Object *obj)
+{
+    uint32_t vq;
+
+    object_property_add(obj, "sve", "bool", cpu_arm_get_sve,
+                        cpu_arm_set_sve, NULL, NULL, &error_fatal);
+
+    for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
+        char name[8];
+        sprintf(name, "sve%d", vq * 128);
+        object_property_add(obj, name, "bool", cpu_arm_get_sve_vq,
+                            cpu_arm_set_sve_vq, NULL, NULL, &error_fatal);
+    }
+}
+
 /* -cpu max: if KVM is enabled, like -cpu host (best possible with this host);
  * otherwise, a CPU with as many features enabled as our emulation supports.
  * The version of '-cpu max' for qemu-system-arm is defined in cpu.c;
@@ -602,17 +617,11 @@ static void cpu_arm_set_sve(Object *obj, Visitor *v, const char *name,
 static void aarch64_max_initfn(Object *obj)
 {
     ARMCPU *cpu = ARM_CPU(obj);
-    uint32_t vq;
-    uint64_t t;
 
     if (kvm_enabled()) {
         kvm_arm_set_cpu_features_from_host(cpu);
-        if (kvm_arm_sve_supported(CPU(cpu))) {
-            t = cpu->isar.id_aa64pfr0;
-            t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1);
-            cpu->isar.id_aa64pfr0 = t;
-        }
     } else {
+        uint64_t t;
         uint32_t u;
         aarch64_a57_initfn(obj);
 
@@ -712,17 +721,9 @@ static void aarch64_max_initfn(Object *obj)
 #endif
     }
 
-    object_property_add(obj, "sve", "bool", cpu_arm_get_sve,
-                        cpu_arm_set_sve, NULL, NULL, &error_fatal);
+    aarch64_add_sve_properties(obj);
     object_property_add(obj, "sve-max-vq", "uint32", cpu_max_get_sve_max_vq,
                         cpu_max_set_sve_max_vq, NULL, NULL, &error_fatal);
-
-    for (vq = 1; vq <= ARM_MAX_VQ; ++vq) {
-        char name[8];
-        sprintf(name, "sve%d", vq * 128);
-        object_property_add(obj, name, "bool", cpu_arm_get_sve_vq,
-                            cpu_arm_set_sve_vq, NULL, NULL, &error_fatal);
-    }
 }
 
 struct ARMCPUInfo {

diff --git a/target/arm/kvm64.c b/target/arm/kvm64.c
index c93bbee425ae91debaf28a7e857bccd5d984d88c..876184b8fe4dea63f0a5f31d1f269f2839727bf3 100644 (file)
--- a/target/arm/kvm64.c
+++ b/target/arm/kvm64.c
@@ -488,7 +488,9 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
      * and then query that CPU for the relevant ID registers.
      */
     int fdarray[3];
+    bool sve_supported;
     uint64_t features = 0;
+    uint64_t t;
     int err;
 
     /* Old kernels may not know about the PREFERRED_TARGET ioctl: however
@@ -578,13 +580,23 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
                               ARM64_SYS_REG(3, 0, 0, 3, 2));
     }
 
+    sve_supported = ioctl(fdarray[0], KVM_CHECK_EXTENSION, KVM_CAP_ARM_SVE) > 0;
+
     kvm_arm_destroy_scratch_host_vcpu(fdarray);
 
     if (err < 0) {
         return false;
     }
 
-   /* We can assume any KVM supporting CPU is at least a v8
+    /* Add feature bits that can't appear until after VCPU init. */
+    if (sve_supported) {
+        t = ahcf->isar.id_aa64pfr0;
+        t = FIELD_DP64(t, ID_AA64PFR0, SVE, 1);
+        ahcf->isar.id_aa64pfr0 = t;
+    }
+
+    /*
+     * We can assume any KVM supporting CPU is at least a v8
      * with VFPv4+Neon; this in turn implies most of the other
      * feature bits.
      */

diff --git a/tests/arm-cpu-features.c b/tests/arm-cpu-features.c
index ffdbc3fce6975779736128638c4a4d1146504306..6e99aa951e74a98df753d18efc2178fb0d766dab 100644 (file)
--- a/tests/arm-cpu-features.c
+++ b/tests/arm-cpu-features.c
@@ -458,8 +458,8 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
             "We cannot guarantee the CPU type 'cortex-a15' works "
             "with KVM on this host", NULL);
 
-        assert_has_feature(qts, "max", "sve");
-        resp = do_query_no_props(qts, "max");
+        assert_has_feature(qts, "host", "sve");
+        resp = do_query_no_props(qts, "host");
         kvm_supports_sve = resp_get_feature(resp, "sve");
         vls = resp_get_sve_vls(resp);
         qobject_unref(resp);
@@ -470,7 +470,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
             sprintf(max_name, "sve%d", max_vq * 128);
 
             /* Enabling a supported length is of course fine. */
-            assert_sve_vls(qts, "max", vls, "{ %s: true }", max_name);
+            assert_sve_vls(qts, "host", vls, "{ %s: true }", max_name);
 
             /* Get the next supported length smaller than max-vq. */
             vq = 64 - __builtin_clzll(vls & ~BIT_ULL(max_vq - 1));
@@ -479,7 +479,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
                  * We have at least one length smaller than max-vq,
                  * so we can disable max-vq.
                  */
-                assert_sve_vls(qts, "max", (vls & ~BIT_ULL(max_vq - 1)),
+                assert_sve_vls(qts, "host", (vls & ~BIT_ULL(max_vq - 1)),
                                "{ %s: false }", max_name);
 
                 /*
@@ -489,7 +489,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
                  */
                 sprintf(name, "sve%d", vq * 128);
                 error = g_strdup_printf("cannot disable %s", name);
-                assert_error(qts, "max", error,
+                assert_error(qts, "host", error,
                              "{ %s: true, %s: false }",
                              max_name, name);
                 g_free(error);
@@ -502,7 +502,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
             vq = __builtin_ffsll(vls);
             sprintf(name, "sve%d", vq * 128);
             error = g_strdup_printf("cannot disable %s", name);
-            assert_error(qts, "max", error, "{ %s: false }", name);
+            assert_error(qts, "host", error, "{ %s: false }", name);
             g_free(error);
 
             /* Get an unsupported length. */
@@ -514,7 +514,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
             if (vq <= SVE_MAX_VQ) {
                 sprintf(name, "sve%d", vq * 128);
                 error = g_strdup_printf("cannot enable %s", name);
-                assert_error(qts, "max", error, "{ %s: true }", name);
+                assert_error(qts, "host", error, "{ %s: true }", name);
                 g_free(error);
             }
         } else {
@@ -523,8 +523,7 @@ static void test_query_cpu_model_expansion_kvm(const void *data)
     } else {
         assert_has_not_feature(qts, "host", "aarch64");
         assert_has_not_feature(qts, "host", "pmu");
-
-        assert_has_not_feature(qts, "max", "sve");
+        assert_has_not_feature(qts, "host", "sve");
     }
 
     qtest_quit(qts);