target-arm: Merge EL3 CP15 register lists

Merge of the v8_el2_cp_reginfo and el3_cp_reginfo ARMCPRegInfo lists.
Previously, some EL3 registers were restricted to the ARMv8 list under the
impression that they were not needed on ARMv7.  However, this is not the case
as the ARMv7/32-bit variants rely on the ARMv8/64-bit variants to handle
migration and reset.  For this reason they must always exist.

Signed-off-by: Greg Bellows <[email protected]>
Message-id: 1418406450[email protected]
Signed-off-by: Peter Maydell <[email protected]>

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 96abbed93599e2094bc36b32fbe87559656e55e8..3ef0f1f38eda5d81e5cf627deb63dd3630e6bcc5 100644 (file)
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -2413,7 +2413,30 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
-static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
+static const ARMCPRegInfo el3_cp_reginfo[] = {
+    { .name = "SCR_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0,
+      .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
+      .resetvalue = 0, .writefn = scr_write },
+    { .name = "SCR",  .type = ARM_CP_NO_MIGRATE,
+      .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0,
+      .access = PL3_RW, .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3),
+      .resetfn = arm_cp_reset_ignore, .writefn = scr_write },
+    { .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
+      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
+      .access = PL3_RW, .resetvalue = 0,
+      .fieldoffset = offsetof(CPUARMState, cp15.sder) },
+    { .name = "SDER",
+      .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 1,
+      .access = PL3_RW, .resetvalue = 0,
+      .fieldoffset = offsetoflow32(CPUARMState, cp15.sder) },
+      /* TODO: Implement NSACR trapping of secure EL1 accesses to EL3 */
+    { .name = "NSACR", .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2,
+      .access = PL3_W | PL1_R, .resetvalue = 0,
+      .fieldoffset = offsetof(CPUARMState, cp15.nsacr) },
+    { .name = "MVBAR", .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1,
+      .access = PL3_RW, .writefn = vbar_write, .resetvalue = 0,
+      .fieldoffset = offsetof(CPUARMState, cp15.mvbar) },
     { .name = "SCTLR_EL3", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 0,
       .access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
@@ -2451,33 +2474,6 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
     REGINFO_SENTINEL
 };
 
-static const ARMCPRegInfo el3_cp_reginfo[] = {
-    { .name = "SCR_EL3", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0,
-      .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
-      .resetvalue = 0, .writefn = scr_write },
-    { .name = "SCR",  .type = ARM_CP_NO_MIGRATE,
-      .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0,
-      .access = PL3_RW, .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3),
-      .resetfn = arm_cp_reset_ignore, .writefn = scr_write },
-    { .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64,
-      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1,
-      .access = PL3_RW, .resetvalue = 0,
-      .fieldoffset = offsetof(CPUARMState, cp15.sder) },
-    { .name = "SDER",
-      .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 1,
-      .access = PL3_RW, .resetvalue = 0,
-      .fieldoffset = offsetoflow32(CPUARMState, cp15.sder) },
-      /* TODO: Implement NSACR trapping of secure EL1 accesses to EL3 */
-    { .name = "NSACR", .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2,
-      .access = PL3_W | PL1_R, .resetvalue = 0,
-      .fieldoffset = offsetof(CPUARMState, cp15.nsacr) },
-    { .name = "MVBAR", .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1,
-      .access = PL3_RW, .writefn = vbar_write, .resetvalue = 0,
-      .fieldoffset = offsetof(CPUARMState, cp15.mvbar) },
-    REGINFO_SENTINEL
-};
-
 static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri)
 {
     /* Only accessible in EL0 if SCTLR.UCT is set (and only in AArch64,
@@ -3077,9 +3073,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
         }
     }
     if (arm_feature(env, ARM_FEATURE_EL3)) {
-        if (arm_feature(env, ARM_FEATURE_V8)) {
-            define_arm_cp_regs(cpu, v8_el3_cp_reginfo);
-        }
         define_arm_cp_regs(cpu, el3_cp_reginfo);
     }
     if (arm_feature(env, ARM_FEATURE_MPU)) {