blockdev: Remove IF_* check for read-only blockdev_init

IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.

Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.

Signed-off-by: Kevin Wolf <[email protected]>
Reviewed-by: Eric Blake <[email protected]>

diff --git a/blockdev.c b/blockdev.c
index b11155caef2f9cafc84db6ad9d431d11aca5507e..401ee25e02d53986f1364f084210f1dd8ba3dda0 100644 (file)
--- a/blockdev.c
+++ b/blockdev.c
@@ -528,12 +528,6 @@ static DriveInfo *blockdev_init(QDict *bs_opts,
     if (media == MEDIA_CDROM) {
         /* CDROM is fine for any interface, don't check.  */
         ro = 1;
-    } else if (ro == 1) {
-        if (type != IF_SCSI && type != IF_VIRTIO && type != IF_FLOPPY &&
-            type != IF_NONE && type != IF_PFLASH) {
-            error_report("read-only not supported by this bus type");
-            goto err;
-        }
     }
 
     bdrv_flags |= ro ? 0 : BDRV_O_RDWR;

diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
index 8c3b7f0d3b2da3bbb39de65937ced80ba089dcb6..02a15441fa0120de7ac15034177c9d1b9e64fdb0 100644 (file)
--- a/hw/block/m25p80.c
+++ b/hw/block/m25p80.c
@@ -624,6 +624,11 @@ static int m25p80_init(SSISlave *ss)
     if (dinfo && dinfo->bdrv) {
         DB_PRINT_L(0, "Binding to IF_MTD drive\n");
         s->bdrv = dinfo->bdrv;
+        if (bdrv_is_read_only(s->bdrv)) {
+            fprintf(stderr, "Can't use a read-only drive");
+            return 1;
+        }
+
         /* FIXME: Move to late init */
         if (bdrv_read(s->bdrv, 0, s->storage, DIV_ROUND_UP(s->size,
                                                     BDRV_SECTOR_SIZE))) {

diff --git a/hw/block/xen_disk.c b/hw/block/xen_disk.c
index 8742294dfbddd7c742a68706ffa84b2e02e2a728..098f6c62c780135c4451f14978e59fc7bdb75a63 100644 (file)
--- a/hw/block/xen_disk.c
+++ b/hw/block/xen_disk.c
@@ -830,6 +830,11 @@ static int blk_connect(struct XenDevice *xendev)
         /* setup via qemu cmdline -> already setup for us */
         xen_be_printf(&blkdev->xendev, 2, "get configured bdrv (cmdline setup)\n");
         blkdev->bs = blkdev->dinfo->bdrv;
+        if (bdrv_is_read_only(blkdev->bs) && !readonly) {
+            xen_be_printf(&blkdev->xendev, 0, "Unexpected read-only drive");
+            blkdev->bs = NULL;
+            return -1;
+        }
         /* blkdev->bs is not create by us, we get a reference
          * so we can bdrv_unref() unconditionally */
         bdrv_ref(blkdev->bs);

diff --git a/hw/sd/milkymist-memcard.c b/hw/sd/milkymist-memcard.c
index 42613b3aff5790b0d36d4c7f16aee30b12bc4a00..d1168c9e045130e9cc8a85612596931d031262df 100644 (file)
--- a/hw/sd/milkymist-memcard.c
+++ b/hw/sd/milkymist-memcard.c
@@ -255,6 +255,10 @@ static int milkymist_memcard_init(SysBusDevice *dev)
 
     dinfo = drive_get_next(IF_SD);
     s->card = sd_init(dinfo ? dinfo->bdrv : NULL, false);
+    if (s->card == NULL) {
+        return -1;
+    }
+
     s->enabled = dinfo ? bdrv_is_inserted(dinfo->bdrv) : 0;
 
     memory_region_init_io(&s->regs_region, OBJECT(s), &memcard_mmio_ops, s,

diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c
index bf5d1fbf6d2d4e32862f62019f59db23781a28f9..937a47869a5f522bf0045f913f8bddbef6577d69 100644 (file)
--- a/hw/sd/omap_mmc.c
+++ b/hw/sd/omap_mmc.c
@@ -593,6 +593,9 @@ struct omap_mmc_s *omap_mmc_init(hwaddr base,
 
     /* Instantiate the storage */
     s->card = sd_init(bd, false);
+    if (s->card == NULL) {
+        exit(1);
+    }
 
     return s;
 }
@@ -618,6 +621,9 @@ struct omap_mmc_s *omap2_mmc_init(struct omap_target_agent_s *ta,
 
     /* Instantiate the storage */
     s->card = sd_init(bd, false);
+    if (s->card == NULL) {
+        exit(1);
+    }
 
     s->cdet = qemu_allocate_irqs(omap_mmc_cover_cb, s, 1)[0];
     sd_set_cb(s->card, NULL, s->cdet);

diff --git a/hw/sd/pl181.c b/hw/sd/pl181.c
index 03875bf6ca38a1e2e104d2b111a480e5a88f06f0..c35896d28c786563378d49a3565a244ffcf8bccb 100644 (file)
--- a/hw/sd/pl181.c
+++ b/hw/sd/pl181.c
@@ -491,6 +491,10 @@ static int pl181_init(SysBusDevice *sbd)
     qdev_init_gpio_out(dev, s->cardstatus, 2);
     dinfo = drive_get_next(IF_SD);
     s->card = sd_init(dinfo ? dinfo->bdrv : NULL, false);
+    if (s->card == NULL) {
+        return -1;
+    }
+
     return 0;
 }
 

diff --git a/hw/sd/pxa2xx_mmci.c b/hw/sd/pxa2xx_mmci.c
index 90c955fe62911c33f1a575a290b52a38c378cf7e..b9d8b1a3e1a2e13f9d62b01ed68e0b513d928f9b 100644 (file)
--- a/hw/sd/pxa2xx_mmci.c
+++ b/hw/sd/pxa2xx_mmci.c
@@ -539,6 +539,9 @@ PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem,
 
     /* Instantiate the actual storage */
     s->card = sd_init(bd, false);
+    if (s->card == NULL) {
+        exit(1);
+    }
 
     register_savevm(NULL, "pxa2xx_mmci", 0, 0,
                     pxa2xx_mmci_save, pxa2xx_mmci_load, s);

diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 346d86f69c81513392da81519a6203b9ea41a7b3..7380f063f7ceccb78a3e07197e5c62f4764499fe 100644 (file)
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -494,6 +494,11 @@ SDState *sd_init(BlockDriverState *bs, bool is_spi)
 {
     SDState *sd;
 
+    if (bdrv_is_read_only(bs)) {
+        fprintf(stderr, "sd_init: Cannot use read-only drive\n");
+        return NULL;
+    }
+
     sd = (SDState *) g_malloc0(sizeof(SDState));
     sd->buf = qemu_blockalign(bs, 512);
     sd->spi = is_spi;

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 1483e196cd8c33115d22b648dbe936ff553fb0a0..0906a1d62b25ba0480d0a36a54ea7e4676272801 100644 (file)
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -1166,6 +1166,9 @@ static void sdhci_initfn(Object *obj)
 
     di = drive_get_next(IF_SD);
     s->card = sd_init(di ? di->bdrv : NULL, false);
+    if (s->card == NULL) {
+        exit(1);
+    }
     s->eject_cb = qemu_allocate_irqs(sdhci_insert_eject_cb, s, 1)[0];
     s->ro_cb = qemu_allocate_irqs(sdhci_card_readonly_cb, s, 1)[0];
     sd_set_cb(s->card, s->ro_cb, s->eject_cb);

diff --git a/hw/sd/ssi-sd.c b/hw/sd/ssi-sd.c
index d47e2377f965c29da2171451e5af873c5c924d8e..1bb56c4d54b92248815e561d76b1a0ce6098d1ea 100644 (file)
--- a/hw/sd/ssi-sd.c
+++ b/hw/sd/ssi-sd.c
@@ -246,6 +246,9 @@ static int ssi_sd_init(SSISlave *dev)
     s->mode = SSI_SD_CMD;
     dinfo = drive_get_next(IF_SD);
     s->sd = sd_init(dinfo ? dinfo->bdrv : NULL, true);
+    if (s->sd == NULL) {
+        return -1;
+    }
     register_savevm(&dev->qdev, "ssi_sd", -1, 1, ssi_sd_save, ssi_sd_load, s);
     return 0;
 }

diff --git a/tests/qemu-iotests/051.out b/tests/qemu-iotests/051.out
index e58776a04699e6b4024cdf71bfa40e7a49190848..2839e32807309135affd4e9a60d0e0b638e9142e 100644 (file)
--- a/tests/qemu-iotests/051.out
+++ b/tests/qemu-iotests/051.out
@@ -139,7 +139,10 @@ QEMU X.Y.Z monitor - type 'help' for more information
 (qemu) q\e[K\e[Dqu\e[K\e[D\e[Dqui\e[K\e[D\e[D\e[Dquit\e[K\r
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
-QEMU_PROG: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on: read-only not supported by this bus type
+QEMU X.Y.Z monitor - type 'help' for more information\r
+(qemu) QEMU_PROG: Can't use a read-only drive
+QEMU_PROG: Device initialization failed.
+QEMU_PROG: Initialization of device ide-hd failed
 
 Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
 QEMU X.Y.Z monitor - type 'help' for more information\r