2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
55 BDRV_REQ_COPY_ON_READ = 0x1,
56 BDRV_REQ_ZERO_WRITE = 0x2,
59 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
60 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
61 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
62 BlockDriverCompletionFunc *cb, void *opaque);
63 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
64 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
65 BlockDriverCompletionFunc *cb, void *opaque);
66 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
67 int64_t sector_num, int nb_sectors,
69 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
70 int64_t sector_num, int nb_sectors,
72 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
73 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
74 BdrvRequestFlags flags);
75 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
76 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
77 BdrvRequestFlags flags);
78 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
82 BlockDriverCompletionFunc *cb,
85 static void coroutine_fn bdrv_co_do_rw(void *opaque);
86 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
87 int64_t sector_num, int nb_sectors);
89 static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
90 bool is_write, double elapsed_time, uint64_t *wait);
91 static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
92 double elapsed_time, uint64_t *wait);
93 static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
94 bool is_write, int64_t *wait);
96 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
97 QTAILQ_HEAD_INITIALIZER(bdrv_states);
99 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
100 QLIST_HEAD_INITIALIZER(bdrv_drivers);
102 /* If non-zero, use only whitelisted block drivers */
103 static int use_bdrv_whitelist;
106 static int is_windows_drive_prefix(const char *filename)
108 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
109 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
113 int is_windows_drive(const char *filename)
115 if (is_windows_drive_prefix(filename) &&
118 if (strstart(filename, "\\\\.\\", NULL) ||
119 strstart(filename, "//./", NULL))
125 /* throttling disk I/O limits */
126 void bdrv_io_limits_disable(BlockDriverState *bs)
128 bs->io_limits_enabled = false;
130 do {} while (qemu_co_enter_next(&bs->throttled_reqs));
132 if (bs->block_timer) {
133 timer_del(bs->block_timer);
134 timer_free(bs->block_timer);
135 bs->block_timer = NULL;
142 static void bdrv_block_timer(void *opaque)
144 BlockDriverState *bs = opaque;
146 qemu_co_enter_next(&bs->throttled_reqs);
149 void bdrv_io_limits_enable(BlockDriverState *bs)
151 bs->block_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, bdrv_block_timer, bs);
152 bs->io_limits_enabled = true;
155 bool bdrv_io_limits_enabled(BlockDriverState *bs)
157 BlockIOLimit *io_limits = &bs->io_limits;
158 return io_limits->bps[BLOCK_IO_LIMIT_READ]
159 || io_limits->bps[BLOCK_IO_LIMIT_WRITE]
160 || io_limits->bps[BLOCK_IO_LIMIT_TOTAL]
161 || io_limits->iops[BLOCK_IO_LIMIT_READ]
162 || io_limits->iops[BLOCK_IO_LIMIT_WRITE]
163 || io_limits->iops[BLOCK_IO_LIMIT_TOTAL];
166 static void bdrv_io_limits_intercept(BlockDriverState *bs,
167 bool is_write, int nb_sectors)
169 int64_t wait_time = -1;
171 if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
172 qemu_co_queue_wait(&bs->throttled_reqs);
175 /* In fact, we hope to keep each request's timing, in FIFO mode. The next
176 * throttled requests will not be dequeued until the current request is
177 * allowed to be serviced. So if the current request still exceeds the
178 * limits, it will be inserted to the head. All requests followed it will
179 * be still in throttled_reqs queue.
182 while (bdrv_exceed_io_limits(bs, nb_sectors, is_write, &wait_time)) {
183 timer_mod(bs->block_timer,
184 wait_time + qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL));
185 qemu_co_queue_wait_insert_head(&bs->throttled_reqs);
188 qemu_co_queue_next(&bs->throttled_reqs);
191 /* check if the path starts with "<protocol>:" */
192 static int path_has_protocol(const char *path)
197 if (is_windows_drive(path) ||
198 is_windows_drive_prefix(path)) {
201 p = path + strcspn(path, ":/\\");
203 p = path + strcspn(path, ":/");
209 int path_is_absolute(const char *path)
212 /* specific case for names like: "\\.\d:" */
213 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
216 return (*path == '/' || *path == '\\');
218 return (*path == '/');
222 /* if filename is absolute, just copy it to dest. Otherwise, build a
223 path to it by considering it is relative to base_path. URL are
225 void path_combine(char *dest, int dest_size,
226 const char *base_path,
227 const char *filename)
234 if (path_is_absolute(filename)) {
235 pstrcpy(dest, dest_size, filename);
237 p = strchr(base_path, ':');
242 p1 = strrchr(base_path, '/');
246 p2 = strrchr(base_path, '\\');
258 if (len > dest_size - 1)
260 memcpy(dest, base_path, len);
262 pstrcat(dest, dest_size, filename);
266 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
268 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
269 pstrcpy(dest, sz, bs->backing_file);
271 path_combine(dest, sz, bs->filename, bs->backing_file);
275 void bdrv_register(BlockDriver *bdrv)
277 /* Block drivers without coroutine functions need emulation */
278 if (!bdrv->bdrv_co_readv) {
279 bdrv->bdrv_co_readv = bdrv_co_readv_em;
280 bdrv->bdrv_co_writev = bdrv_co_writev_em;
282 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
283 * the block driver lacks aio we need to emulate that too.
285 if (!bdrv->bdrv_aio_readv) {
286 /* add AIO emulation layer */
287 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
288 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
292 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
295 /* create a new block device (by default it is empty) */
296 BlockDriverState *bdrv_new(const char *device_name)
298 BlockDriverState *bs;
300 bs = g_malloc0(sizeof(BlockDriverState));
301 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
302 if (device_name[0] != '\0') {
303 QTAILQ_INSERT_TAIL(&bdrv_states, bs, list);
305 bdrv_iostatus_disable(bs);
306 notifier_list_init(&bs->close_notifiers);
307 notifier_with_return_list_init(&bs->before_write_notifiers);
308 qemu_co_queue_init(&bs->throttled_reqs);
313 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
315 notifier_list_add(&bs->close_notifiers, notify);
318 BlockDriver *bdrv_find_format(const char *format_name)
321 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
322 if (!strcmp(drv1->format_name, format_name)) {
329 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
331 static const char *whitelist_rw[] = {
332 CONFIG_BDRV_RW_WHITELIST
334 static const char *whitelist_ro[] = {
335 CONFIG_BDRV_RO_WHITELIST
339 if (!whitelist_rw[0] && !whitelist_ro[0]) {
340 return 1; /* no whitelist, anything goes */
343 for (p = whitelist_rw; *p; p++) {
344 if (!strcmp(drv->format_name, *p)) {
349 for (p = whitelist_ro; *p; p++) {
350 if (!strcmp(drv->format_name, *p)) {
358 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
361 BlockDriver *drv = bdrv_find_format(format_name);
362 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
365 typedef struct CreateCo {
368 QEMUOptionParameter *options;
372 static void coroutine_fn bdrv_create_co_entry(void *opaque)
374 CreateCo *cco = opaque;
377 cco->ret = cco->drv->bdrv_create(cco->filename, cco->options);
380 int bdrv_create(BlockDriver *drv, const char* filename,
381 QEMUOptionParameter *options)
388 .filename = g_strdup(filename),
393 if (!drv->bdrv_create) {
398 if (qemu_in_coroutine()) {
399 /* Fast-path if already in coroutine context */
400 bdrv_create_co_entry(&cco);
402 co = qemu_coroutine_create(bdrv_create_co_entry);
403 qemu_coroutine_enter(co, &cco);
404 while (cco.ret == NOT_DONE) {
412 g_free(cco.filename);
416 int bdrv_create_file(const char* filename, QEMUOptionParameter *options)
420 drv = bdrv_find_protocol(filename, true);
425 return bdrv_create(drv, filename, options);
429 * Create a uniquely-named empty temporary file.
430 * Return 0 upon success, otherwise a negative errno value.
432 int get_tmp_filename(char *filename, int size)
435 char temp_dir[MAX_PATH];
436 /* GetTempFileName requires that its output buffer (4th param)
437 have length MAX_PATH or greater. */
438 assert(size >= MAX_PATH);
439 return (GetTempPath(MAX_PATH, temp_dir)
440 && GetTempFileName(temp_dir, "qem", 0, filename)
441 ? 0 : -GetLastError());
445 tmpdir = getenv("TMPDIR");
448 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
451 fd = mkstemp(filename);
455 if (close(fd) != 0) {
464 * Detect host devices. By convention, /dev/cdrom[N] is always
465 * recognized as a host CDROM.
467 static BlockDriver *find_hdev_driver(const char *filename)
469 int score_max = 0, score;
470 BlockDriver *drv = NULL, *d;
472 QLIST_FOREACH(d, &bdrv_drivers, list) {
473 if (d->bdrv_probe_device) {
474 score = d->bdrv_probe_device(filename);
475 if (score > score_max) {
485 BlockDriver *bdrv_find_protocol(const char *filename,
486 bool allow_protocol_prefix)
493 /* TODO Drivers without bdrv_file_open must be specified explicitly */
496 * XXX(hch): we really should not let host device detection
497 * override an explicit protocol specification, but moving this
498 * later breaks access to device names with colons in them.
499 * Thanks to the brain-dead persistent naming schemes on udev-
500 * based Linux systems those actually are quite common.
502 drv1 = find_hdev_driver(filename);
507 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
508 return bdrv_find_format("file");
511 p = strchr(filename, ':');
514 if (len > sizeof(protocol) - 1)
515 len = sizeof(protocol) - 1;
516 memcpy(protocol, filename, len);
517 protocol[len] = '\0';
518 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
519 if (drv1->protocol_name &&
520 !strcmp(drv1->protocol_name, protocol)) {
527 static int find_image_format(BlockDriverState *bs, const char *filename,
530 int score, score_max;
531 BlockDriver *drv1, *drv;
535 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
536 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
537 drv = bdrv_find_format("raw");
545 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
553 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
554 if (drv1->bdrv_probe) {
555 score = drv1->bdrv_probe(buf, ret, filename);
556 if (score > score_max) {
570 * Set the current 'total_sectors' value
572 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
574 BlockDriver *drv = bs->drv;
576 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
580 /* query actual device if possible, otherwise just trust the hint */
581 if (drv->bdrv_getlength) {
582 int64_t length = drv->bdrv_getlength(bs);
586 hint = length >> BDRV_SECTOR_BITS;
589 bs->total_sectors = hint;
594 * Set open flags for a given discard mode
596 * Return 0 on success, -1 if the discard mode was invalid.
598 int bdrv_parse_discard_flags(const char *mode, int *flags)
600 *flags &= ~BDRV_O_UNMAP;
602 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
604 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
605 *flags |= BDRV_O_UNMAP;
614 * Set open flags for a given cache mode
616 * Return 0 on success, -1 if the cache mode was invalid.
618 int bdrv_parse_cache_flags(const char *mode, int *flags)
620 *flags &= ~BDRV_O_CACHE_MASK;
622 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
623 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
624 } else if (!strcmp(mode, "directsync")) {
625 *flags |= BDRV_O_NOCACHE;
626 } else if (!strcmp(mode, "writeback")) {
627 *flags |= BDRV_O_CACHE_WB;
628 } else if (!strcmp(mode, "unsafe")) {
629 *flags |= BDRV_O_CACHE_WB;
630 *flags |= BDRV_O_NO_FLUSH;
631 } else if (!strcmp(mode, "writethrough")) {
632 /* this is the default */
641 * The copy-on-read flag is actually a reference count so multiple users may
642 * use the feature without worrying about clobbering its previous state.
643 * Copy-on-read stays enabled until all users have called to disable it.
645 void bdrv_enable_copy_on_read(BlockDriverState *bs)
650 void bdrv_disable_copy_on_read(BlockDriverState *bs)
652 assert(bs->copy_on_read > 0);
656 static int bdrv_open_flags(BlockDriverState *bs, int flags)
658 int open_flags = flags | BDRV_O_CACHE_WB;
661 * Clear flags that are internal to the block layer before opening the
664 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
667 * Snapshots should be writable.
669 if (bs->is_temporary) {
670 open_flags |= BDRV_O_RDWR;
677 * Common part for opening disk images and files
679 * Removes all processed options from *options.
681 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
682 QDict *options, int flags, BlockDriver *drv)
685 const char *filename;
688 assert(bs->file == NULL);
689 assert(options != NULL && bs->options != options);
692 filename = file->filename;
694 filename = qdict_get_try_str(options, "filename");
697 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
699 /* bdrv_open() with directly using a protocol as drv. This layer is already
700 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
701 * and return immediately. */
702 if (file != NULL && drv->bdrv_file_open) {
707 bs->open_flags = flags;
708 bs->buffer_alignment = 512;
709 bs->zero_beyond_eof = true;
710 open_flags = bdrv_open_flags(bs, flags);
711 bs->read_only = !(open_flags & BDRV_O_RDWR);
713 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
717 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
718 if (!bs->read_only && (flags & BDRV_O_COPY_ON_READ)) {
719 bdrv_enable_copy_on_read(bs);
722 if (filename != NULL) {
723 pstrcpy(bs->filename, sizeof(bs->filename), filename);
725 bs->filename[0] = '\0';
729 bs->opaque = g_malloc0(drv->instance_size);
731 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
733 /* Open the image, either directly or using a protocol */
734 if (drv->bdrv_file_open) {
735 assert(file == NULL);
736 assert(drv->bdrv_parse_filename || filename != NULL);
737 ret = drv->bdrv_file_open(bs, options, open_flags);
740 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't use '%s' as a "
741 "block driver for the protocol level",
747 ret = drv->bdrv_open(bs, options, open_flags);
754 ret = refresh_total_sectors(bs, bs->total_sectors);
760 if (bs->is_temporary) {
761 assert(filename != NULL);
776 * Opens a file using a protocol (file, host_device, nbd, ...)
778 * options is a QDict of options to pass to the block drivers, or NULL for an
779 * empty set of options. The reference to the QDict belongs to the block layer
780 * after the call (even on failure), so if the caller intends to reuse the
781 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
783 int bdrv_file_open(BlockDriverState **pbs, const char *filename,
784 QDict *options, int flags)
786 BlockDriverState *bs;
789 bool allow_protocol_prefix = false;
792 /* NULL means an empty set of options */
793 if (options == NULL) {
794 options = qdict_new();
798 bs->options = options;
799 options = qdict_clone_shallow(options);
801 /* Fetch the file name from the options QDict if necessary */
803 filename = qdict_get_try_str(options, "filename");
804 } else if (filename && !qdict_haskey(options, "filename")) {
805 qdict_put(options, "filename", qstring_from_str(filename));
806 allow_protocol_prefix = true;
808 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't specify 'file' and "
809 "'filename' options at the same time");
814 /* Find the right block driver */
815 drvname = qdict_get_try_str(options, "driver");
817 drv = bdrv_find_whitelisted_format(drvname, !(flags & BDRV_O_RDWR));
818 qdict_del(options, "driver");
819 } else if (filename) {
820 drv = bdrv_find_protocol(filename, allow_protocol_prefix);
822 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Unknown protocol");
825 qerror_report(ERROR_CLASS_GENERIC_ERROR,
826 "Must specify either driver or file");
835 /* Parse the filename and open it */
836 if (drv->bdrv_parse_filename && filename) {
837 Error *local_err = NULL;
838 drv->bdrv_parse_filename(filename, options, &local_err);
839 if (error_is_set(&local_err)) {
840 qerror_report_err(local_err);
841 error_free(local_err);
845 qdict_del(options, "filename");
846 } else if (!drv->bdrv_parse_filename && !filename) {
847 qerror_report(ERROR_CLASS_GENERIC_ERROR,
848 "The '%s' block driver requires a file name",
854 ret = bdrv_open_common(bs, NULL, options, flags, drv);
859 /* Check if any unknown options were used */
860 if (qdict_size(options) != 0) {
861 const QDictEntry *entry = qdict_first(options);
862 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block protocol '%s' doesn't "
863 "support the option '%s'",
864 drv->format_name, entry->key);
877 QDECREF(bs->options);
884 * Opens the backing file for a BlockDriverState if not yet open
886 * options is a QDict of options to pass to the block drivers, or NULL for an
887 * empty set of options. The reference to the QDict is transferred to this
888 * function (even on failure), so if the caller intends to reuse the dictionary,
889 * it needs to use QINCREF() before calling bdrv_file_open.
891 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options)
893 char backing_filename[PATH_MAX];
895 BlockDriver *back_drv = NULL;
897 if (bs->backing_hd != NULL) {
902 /* NULL means an empty set of options */
903 if (options == NULL) {
904 options = qdict_new();
907 bs->open_flags &= ~BDRV_O_NO_BACKING;
908 if (qdict_haskey(options, "file.filename")) {
909 backing_filename[0] = '\0';
910 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
915 bs->backing_hd = bdrv_new("");
916 bdrv_get_full_backing_filename(bs, backing_filename,
917 sizeof(backing_filename));
919 if (bs->backing_format[0] != '\0') {
920 back_drv = bdrv_find_format(bs->backing_format);
923 /* backing files always opened read-only */
924 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT);
926 ret = bdrv_open(bs->backing_hd,
927 *backing_filename ? backing_filename : NULL, options,
928 back_flags, back_drv);
930 bdrv_delete(bs->backing_hd);
931 bs->backing_hd = NULL;
932 bs->open_flags |= BDRV_O_NO_BACKING;
938 static void extract_subqdict(QDict *src, QDict **dst, const char *start)
940 const QDictEntry *entry, *next;
944 entry = qdict_first(src);
946 while (entry != NULL) {
947 next = qdict_next(src, entry);
948 if (strstart(entry->key, start, &p)) {
949 qobject_incref(entry->value);
950 qdict_put_obj(*dst, p, entry->value);
951 qdict_del(src, entry->key);
958 * Opens a disk image (raw, qcow2, vmdk, ...)
960 * options is a QDict of options to pass to the block drivers, or NULL for an
961 * empty set of options. The reference to the QDict belongs to the block layer
962 * after the call (even on failure), so if the caller intends to reuse the
963 * dictionary, it needs to use QINCREF() before calling bdrv_open.
965 int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
966 int flags, BlockDriver *drv)
969 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
970 char tmp_filename[PATH_MAX + 1];
971 BlockDriverState *file = NULL;
972 QDict *file_options = NULL;
975 /* NULL means an empty set of options */
976 if (options == NULL) {
977 options = qdict_new();
980 bs->options = options;
981 options = qdict_clone_shallow(options);
983 /* For snapshot=on, create a temporary qcow2 overlay */
984 if (flags & BDRV_O_SNAPSHOT) {
985 BlockDriverState *bs1;
987 BlockDriver *bdrv_qcow2;
988 QEMUOptionParameter *create_options;
989 char backing_filename[PATH_MAX];
991 if (qdict_size(options) != 0) {
992 error_report("Can't use snapshot=on with driver-specific options");
996 assert(filename != NULL);
998 /* if snapshot, we create a temporary backing file and open it
999 instead of opening 'filename' directly */
1001 /* if there is a backing file, use it */
1003 ret = bdrv_open(bs1, filename, NULL, 0, drv);
1008 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1012 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1017 /* Real path is meaningless for protocols */
1018 if (path_has_protocol(filename)) {
1019 snprintf(backing_filename, sizeof(backing_filename),
1021 } else if (!realpath(filename, backing_filename)) {
1026 bdrv_qcow2 = bdrv_find_format("qcow2");
1027 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1030 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1031 set_option_parameter(create_options, BLOCK_OPT_BACKING_FILE,
1034 set_option_parameter(create_options, BLOCK_OPT_BACKING_FMT,
1038 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options);
1039 free_option_parameters(create_options);
1044 filename = tmp_filename;
1046 bs->is_temporary = 1;
1049 /* Open image file without format layer */
1050 if (flags & BDRV_O_RDWR) {
1051 flags |= BDRV_O_ALLOW_RDWR;
1054 extract_subqdict(options, &file_options, "file.");
1056 ret = bdrv_file_open(&file, filename, file_options,
1057 bdrv_open_flags(bs, flags | BDRV_O_UNMAP));
1062 /* Find the right image format driver */
1063 drvname = qdict_get_try_str(options, "driver");
1065 drv = bdrv_find_whitelisted_format(drvname, !(flags & BDRV_O_RDWR));
1066 qdict_del(options, "driver");
1070 ret = find_image_format(file, filename, &drv);
1074 goto unlink_and_fail;
1077 /* Open the image */
1078 ret = bdrv_open_common(bs, file, options, flags, drv);
1080 goto unlink_and_fail;
1083 if (bs->file != file) {
1088 /* If there is a backing file, use it */
1089 if ((flags & BDRV_O_NO_BACKING) == 0) {
1090 QDict *backing_options;
1092 extract_subqdict(options, &backing_options, "backing.");
1093 ret = bdrv_open_backing_file(bs, backing_options);
1095 goto close_and_fail;
1099 /* Check if any unknown options were used */
1100 if (qdict_size(options) != 0) {
1101 const QDictEntry *entry = qdict_first(options);
1102 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block format '%s' used by "
1103 "device '%s' doesn't support the option '%s'",
1104 drv->format_name, bs->device_name, entry->key);
1107 goto close_and_fail;
1111 if (!bdrv_key_required(bs)) {
1112 bdrv_dev_change_media_cb(bs, true);
1115 /* throttling disk I/O limits */
1116 if (bs->io_limits_enabled) {
1117 bdrv_io_limits_enable(bs);
1126 if (bs->is_temporary) {
1130 QDECREF(bs->options);
1141 typedef struct BlockReopenQueueEntry {
1143 BDRVReopenState state;
1144 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1145 } BlockReopenQueueEntry;
1148 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1149 * reopen of multiple devices.
1151 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1152 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1153 * be created and initialized. This newly created BlockReopenQueue should be
1154 * passed back in for subsequent calls that are intended to be of the same
1157 * bs is the BlockDriverState to add to the reopen queue.
1159 * flags contains the open flags for the associated bs
1161 * returns a pointer to bs_queue, which is either the newly allocated
1162 * bs_queue, or the existing bs_queue being used.
1165 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1166 BlockDriverState *bs, int flags)
1170 BlockReopenQueueEntry *bs_entry;
1171 if (bs_queue == NULL) {
1172 bs_queue = g_new0(BlockReopenQueue, 1);
1173 QSIMPLEQ_INIT(bs_queue);
1177 bdrv_reopen_queue(bs_queue, bs->file, flags);
1180 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1181 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1183 bs_entry->state.bs = bs;
1184 bs_entry->state.flags = flags;
1190 * Reopen multiple BlockDriverStates atomically & transactionally.
1192 * The queue passed in (bs_queue) must have been built up previous
1193 * via bdrv_reopen_queue().
1195 * Reopens all BDS specified in the queue, with the appropriate
1196 * flags. All devices are prepared for reopen, and failure of any
1197 * device will cause all device changes to be abandonded, and intermediate
1200 * If all devices prepare successfully, then the changes are committed
1204 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1207 BlockReopenQueueEntry *bs_entry, *next;
1208 Error *local_err = NULL;
1210 assert(bs_queue != NULL);
1214 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1215 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1216 error_propagate(errp, local_err);
1219 bs_entry->prepared = true;
1222 /* If we reach this point, we have success and just need to apply the
1225 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1226 bdrv_reopen_commit(&bs_entry->state);
1232 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1233 if (ret && bs_entry->prepared) {
1234 bdrv_reopen_abort(&bs_entry->state);
1243 /* Reopen a single BlockDriverState with the specified flags. */
1244 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1247 Error *local_err = NULL;
1248 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1250 ret = bdrv_reopen_multiple(queue, &local_err);
1251 if (local_err != NULL) {
1252 error_propagate(errp, local_err);
1259 * Prepares a BlockDriverState for reopen. All changes are staged in the
1260 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1261 * the block driver layer .bdrv_reopen_prepare()
1263 * bs is the BlockDriverState to reopen
1264 * flags are the new open flags
1265 * queue is the reopen queue
1267 * Returns 0 on success, non-zero on error. On error errp will be set
1270 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1271 * It is the responsibility of the caller to then call the abort() or
1272 * commit() for any other BDS that have been left in a prepare() state
1275 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1279 Error *local_err = NULL;
1282 assert(reopen_state != NULL);
1283 assert(reopen_state->bs->drv != NULL);
1284 drv = reopen_state->bs->drv;
1286 /* if we are to stay read-only, do not allow permission change
1288 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1289 reopen_state->flags & BDRV_O_RDWR) {
1290 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1291 reopen_state->bs->device_name);
1296 ret = bdrv_flush(reopen_state->bs);
1298 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1303 if (drv->bdrv_reopen_prepare) {
1304 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1306 if (local_err != NULL) {
1307 error_propagate(errp, local_err);
1309 error_setg(errp, "failed while preparing to reopen image '%s'",
1310 reopen_state->bs->filename);
1315 /* It is currently mandatory to have a bdrv_reopen_prepare()
1316 * handler for each supported drv. */
1317 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1318 drv->format_name, reopen_state->bs->device_name,
1319 "reopening of file");
1331 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1332 * makes them final by swapping the staging BlockDriverState contents into
1333 * the active BlockDriverState contents.
1335 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1339 assert(reopen_state != NULL);
1340 drv = reopen_state->bs->drv;
1341 assert(drv != NULL);
1343 /* If there are any driver level actions to take */
1344 if (drv->bdrv_reopen_commit) {
1345 drv->bdrv_reopen_commit(reopen_state);
1348 /* set BDS specific flags now */
1349 reopen_state->bs->open_flags = reopen_state->flags;
1350 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1352 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1356 * Abort the reopen, and delete and free the staged changes in
1359 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1363 assert(reopen_state != NULL);
1364 drv = reopen_state->bs->drv;
1365 assert(drv != NULL);
1367 if (drv->bdrv_reopen_abort) {
1368 drv->bdrv_reopen_abort(reopen_state);
1373 void bdrv_close(BlockDriverState *bs)
1376 block_job_cancel_sync(bs->job);
1378 bdrv_drain_all(); /* complete I/O */
1380 bdrv_drain_all(); /* in case flush left pending I/O */
1381 notifier_list_notify(&bs->close_notifiers, bs);
1384 if (bs->backing_hd) {
1385 bdrv_delete(bs->backing_hd);
1386 bs->backing_hd = NULL;
1388 bs->drv->bdrv_close(bs);
1391 if (bs->is_temporary) {
1392 unlink(bs->filename);
1397 bs->copy_on_read = 0;
1398 bs->backing_file[0] = '\0';
1399 bs->backing_format[0] = '\0';
1400 bs->total_sectors = 0;
1405 bs->zero_beyond_eof = false;
1406 QDECREF(bs->options);
1409 if (bs->file != NULL) {
1410 bdrv_delete(bs->file);
1415 bdrv_dev_change_media_cb(bs, false);
1417 /*throttling disk I/O limits*/
1418 if (bs->io_limits_enabled) {
1419 bdrv_io_limits_disable(bs);
1423 void bdrv_close_all(void)
1425 BlockDriverState *bs;
1427 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1432 /* Check if any requests are in-flight (including throttled requests) */
1433 static bool bdrv_requests_pending(BlockDriverState *bs)
1435 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1438 if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
1441 if (bs->file && bdrv_requests_pending(bs->file)) {
1444 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1450 static bool bdrv_requests_pending_all(void)
1452 BlockDriverState *bs;
1453 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1454 if (bdrv_requests_pending(bs)) {
1462 * Wait for pending requests to complete across all BlockDriverStates
1464 * This function does not flush data to disk, use bdrv_flush_all() for that
1465 * after calling this function.
1467 * Note that completion of an asynchronous I/O operation can trigger any
1468 * number of other I/O operations on other devices---for example a coroutine
1469 * can be arbitrarily complex and a constant flow of I/O can come until the
1470 * coroutine is complete. Because of this, it is not possible to have a
1471 * function to drain a single device's I/O queue.
1473 void bdrv_drain_all(void)
1475 /* Always run first iteration so any pending completion BHs run */
1477 BlockDriverState *bs;
1480 /* FIXME: We do not have timer support here, so this is effectively
1483 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1484 while (qemu_co_enter_next(&bs->throttled_reqs)) {
1489 busy = bdrv_requests_pending_all();
1490 busy |= aio_poll(qemu_get_aio_context(), busy);
1494 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1495 Also, NULL terminate the device_name to prevent double remove */
1496 void bdrv_make_anon(BlockDriverState *bs)
1498 if (bs->device_name[0] != '\0') {
1499 QTAILQ_REMOVE(&bdrv_states, bs, list);
1501 bs->device_name[0] = '\0';
1504 static void bdrv_rebind(BlockDriverState *bs)
1506 if (bs->drv && bs->drv->bdrv_rebind) {
1507 bs->drv->bdrv_rebind(bs);
1511 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1512 BlockDriverState *bs_src)
1514 /* move some fields that need to stay attached to the device */
1515 bs_dest->open_flags = bs_src->open_flags;
1518 bs_dest->dev_ops = bs_src->dev_ops;
1519 bs_dest->dev_opaque = bs_src->dev_opaque;
1520 bs_dest->dev = bs_src->dev;
1521 bs_dest->buffer_alignment = bs_src->buffer_alignment;
1522 bs_dest->copy_on_read = bs_src->copy_on_read;
1524 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1526 /* i/o timing parameters */
1527 bs_dest->slice_start = bs_src->slice_start;
1528 bs_dest->slice_end = bs_src->slice_end;
1529 bs_dest->slice_submitted = bs_src->slice_submitted;
1530 bs_dest->io_limits = bs_src->io_limits;
1531 bs_dest->throttled_reqs = bs_src->throttled_reqs;
1532 bs_dest->block_timer = bs_src->block_timer;
1533 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1536 bs_dest->on_read_error = bs_src->on_read_error;
1537 bs_dest->on_write_error = bs_src->on_write_error;
1540 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1541 bs_dest->iostatus = bs_src->iostatus;
1544 bs_dest->dirty_bitmap = bs_src->dirty_bitmap;
1547 bs_dest->in_use = bs_src->in_use;
1548 bs_dest->job = bs_src->job;
1550 /* keep the same entry in bdrv_states */
1551 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1552 bs_src->device_name);
1553 bs_dest->list = bs_src->list;
1557 * Swap bs contents for two image chains while they are live,
1558 * while keeping required fields on the BlockDriverState that is
1559 * actually attached to a device.
1561 * This will modify the BlockDriverState fields, and swap contents
1562 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1564 * bs_new is required to be anonymous.
1566 * This function does not create any image files.
1568 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1570 BlockDriverState tmp;
1572 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1573 assert(bs_new->device_name[0] == '\0');
1574 assert(bs_new->dirty_bitmap == NULL);
1575 assert(bs_new->job == NULL);
1576 assert(bs_new->dev == NULL);
1577 assert(bs_new->in_use == 0);
1578 assert(bs_new->io_limits_enabled == false);
1579 assert(bs_new->block_timer == NULL);
1585 /* there are some fields that should not be swapped, move them back */
1586 bdrv_move_feature_fields(&tmp, bs_old);
1587 bdrv_move_feature_fields(bs_old, bs_new);
1588 bdrv_move_feature_fields(bs_new, &tmp);
1590 /* bs_new shouldn't be in bdrv_states even after the swap! */
1591 assert(bs_new->device_name[0] == '\0');
1593 /* Check a few fields that should remain attached to the device */
1594 assert(bs_new->dev == NULL);
1595 assert(bs_new->job == NULL);
1596 assert(bs_new->in_use == 0);
1597 assert(bs_new->io_limits_enabled == false);
1598 assert(bs_new->block_timer == NULL);
1600 bdrv_rebind(bs_new);
1601 bdrv_rebind(bs_old);
1605 * Add new bs contents at the top of an image chain while the chain is
1606 * live, while keeping required fields on the top layer.
1608 * This will modify the BlockDriverState fields, and swap contents
1609 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1611 * bs_new is required to be anonymous.
1613 * This function does not create any image files.
1615 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1617 bdrv_swap(bs_new, bs_top);
1619 /* The contents of 'tmp' will become bs_top, as we are
1620 * swapping bs_new and bs_top contents. */
1621 bs_top->backing_hd = bs_new;
1622 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1623 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1625 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1626 bs_new->drv ? bs_new->drv->format_name : "");
1629 void bdrv_delete(BlockDriverState *bs)
1633 assert(!bs->in_use);
1637 /* remove from list, if necessary */
1643 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1644 /* TODO change to DeviceState *dev when all users are qdevified */
1650 bdrv_iostatus_reset(bs);
1654 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1655 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1657 if (bdrv_attach_dev(bs, dev) < 0) {
1662 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1663 /* TODO change to DeviceState *dev when all users are qdevified */
1665 assert(bs->dev == dev);
1668 bs->dev_opaque = NULL;
1669 bs->buffer_alignment = 512;
1672 /* TODO change to return DeviceState * when all users are qdevified */
1673 void *bdrv_get_attached_dev(BlockDriverState *bs)
1678 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1682 bs->dev_opaque = opaque;
1685 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1686 enum MonitorEvent ev,
1687 BlockErrorAction action, bool is_read)
1690 const char *action_str;
1693 case BDRV_ACTION_REPORT:
1694 action_str = "report";
1696 case BDRV_ACTION_IGNORE:
1697 action_str = "ignore";
1699 case BDRV_ACTION_STOP:
1700 action_str = "stop";
1706 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1709 is_read ? "read" : "write");
1710 monitor_protocol_event(ev, data);
1712 qobject_decref(data);
1715 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
1719 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1720 bdrv_get_device_name(bs), ejected);
1721 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
1723 qobject_decref(data);
1726 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
1728 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
1729 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
1730 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
1731 if (tray_was_closed) {
1733 bdrv_emit_qmp_eject_event(bs, true);
1737 bdrv_emit_qmp_eject_event(bs, false);
1742 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
1744 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
1747 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
1749 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
1750 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
1754 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
1756 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
1757 return bs->dev_ops->is_tray_open(bs->dev_opaque);
1762 static void bdrv_dev_resize_cb(BlockDriverState *bs)
1764 if (bs->dev_ops && bs->dev_ops->resize_cb) {
1765 bs->dev_ops->resize_cb(bs->dev_opaque);
1769 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
1771 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
1772 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
1778 * Run consistency checks on an image
1780 * Returns 0 if the check could be completed (it doesn't mean that the image is
1781 * free of errors) or -errno when an internal error occurred. The results of the
1782 * check are stored in res.
1784 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
1786 if (bs->drv->bdrv_check == NULL) {
1790 memset(res, 0, sizeof(*res));
1791 return bs->drv->bdrv_check(bs, res, fix);
1794 #define COMMIT_BUF_SECTORS 2048
1796 /* commit COW file into the raw image */
1797 int bdrv_commit(BlockDriverState *bs)
1799 BlockDriver *drv = bs->drv;
1800 int64_t sector, total_sectors;
1801 int n, ro, open_flags;
1804 char filename[PATH_MAX];
1809 if (!bs->backing_hd) {
1813 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
1817 ro = bs->backing_hd->read_only;
1818 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1819 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
1820 open_flags = bs->backing_hd->open_flags;
1823 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
1828 total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
1829 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
1831 for (sector = 0; sector < total_sectors; sector += n) {
1832 if (bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n)) {
1834 if (bdrv_read(bs, sector, buf, n) != 0) {
1839 if (bdrv_write(bs->backing_hd, sector, buf, n) != 0) {
1846 if (drv->bdrv_make_empty) {
1847 ret = drv->bdrv_make_empty(bs);
1852 * Make sure all data we wrote to the backing device is actually
1856 bdrv_flush(bs->backing_hd);
1862 /* ignoring error return here */
1863 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
1869 int bdrv_commit_all(void)
1871 BlockDriverState *bs;
1873 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1874 if (bs->drv && bs->backing_hd) {
1875 int ret = bdrv_commit(bs);
1885 * Remove an active request from the tracked requests list
1887 * This function should be called when a tracked request is completing.
1889 static void tracked_request_end(BdrvTrackedRequest *req)
1891 QLIST_REMOVE(req, list);
1892 qemu_co_queue_restart_all(&req->wait_queue);
1896 * Add an active request to the tracked requests list
1898 static void tracked_request_begin(BdrvTrackedRequest *req,
1899 BlockDriverState *bs,
1901 int nb_sectors, bool is_write)
1903 *req = (BdrvTrackedRequest){
1905 .sector_num = sector_num,
1906 .nb_sectors = nb_sectors,
1907 .is_write = is_write,
1908 .co = qemu_coroutine_self(),
1911 qemu_co_queue_init(&req->wait_queue);
1913 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
1917 * Round a region to cluster boundaries
1919 void bdrv_round_to_clusters(BlockDriverState *bs,
1920 int64_t sector_num, int nb_sectors,
1921 int64_t *cluster_sector_num,
1922 int *cluster_nb_sectors)
1924 BlockDriverInfo bdi;
1926 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
1927 *cluster_sector_num = sector_num;
1928 *cluster_nb_sectors = nb_sectors;
1930 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
1931 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
1932 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
1937 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
1938 int64_t sector_num, int nb_sectors) {
1940 if (sector_num >= req->sector_num + req->nb_sectors) {
1944 if (req->sector_num >= sector_num + nb_sectors) {
1950 static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
1951 int64_t sector_num, int nb_sectors)
1953 BdrvTrackedRequest *req;
1954 int64_t cluster_sector_num;
1955 int cluster_nb_sectors;
1958 /* If we touch the same cluster it counts as an overlap. This guarantees
1959 * that allocating writes will be serialized and not race with each other
1960 * for the same cluster. For example, in copy-on-read it ensures that the
1961 * CoR read and write operations are atomic and guest writes cannot
1962 * interleave between them.
1964 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
1965 &cluster_sector_num, &cluster_nb_sectors);
1969 QLIST_FOREACH(req, &bs->tracked_requests, list) {
1970 if (tracked_request_overlaps(req, cluster_sector_num,
1971 cluster_nb_sectors)) {
1972 /* Hitting this means there was a reentrant request, for
1973 * example, a block driver issuing nested requests. This must
1974 * never happen since it means deadlock.
1976 assert(qemu_coroutine_self() != req->co);
1978 qemu_co_queue_wait(&req->wait_queue);
1989 * -EINVAL - backing format specified, but no file
1990 * -ENOSPC - can't update the backing file because no space is left in the
1992 * -ENOTSUP - format driver doesn't support changing the backing file
1994 int bdrv_change_backing_file(BlockDriverState *bs,
1995 const char *backing_file, const char *backing_fmt)
1997 BlockDriver *drv = bs->drv;
2000 /* Backing file format doesn't make sense without a backing file */
2001 if (backing_fmt && !backing_file) {
2005 if (drv->bdrv_change_backing_file != NULL) {
2006 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2012 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2013 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2019 * Finds the image layer in the chain that has 'bs' as its backing file.
2021 * active is the current topmost image.
2023 * Returns NULL if bs is not found in active's image chain,
2024 * or if active == bs.
2026 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2027 BlockDriverState *bs)
2029 BlockDriverState *overlay = NULL;
2030 BlockDriverState *intermediate;
2032 assert(active != NULL);
2035 /* if bs is the same as active, then by definition it has no overlay
2041 intermediate = active;
2042 while (intermediate->backing_hd) {
2043 if (intermediate->backing_hd == bs) {
2044 overlay = intermediate;
2047 intermediate = intermediate->backing_hd;
2053 typedef struct BlkIntermediateStates {
2054 BlockDriverState *bs;
2055 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2056 } BlkIntermediateStates;
2060 * Drops images above 'base' up to and including 'top', and sets the image
2061 * above 'top' to have base as its backing file.
2063 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2064 * information in 'bs' can be properly updated.
2066 * E.g., this will convert the following chain:
2067 * bottom <- base <- intermediate <- top <- active
2071 * bottom <- base <- active
2073 * It is allowed for bottom==base, in which case it converts:
2075 * base <- intermediate <- top <- active
2082 * if active == top, that is considered an error
2085 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2086 BlockDriverState *base)
2088 BlockDriverState *intermediate;
2089 BlockDriverState *base_bs = NULL;
2090 BlockDriverState *new_top_bs = NULL;
2091 BlkIntermediateStates *intermediate_state, *next;
2094 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2095 QSIMPLEQ_INIT(&states_to_delete);
2097 if (!top->drv || !base->drv) {
2101 new_top_bs = bdrv_find_overlay(active, top);
2103 if (new_top_bs == NULL) {
2104 /* we could not find the image above 'top', this is an error */
2108 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2109 * to do, no intermediate images */
2110 if (new_top_bs->backing_hd == base) {
2117 /* now we will go down through the list, and add each BDS we find
2118 * into our deletion queue, until we hit the 'base'
2120 while (intermediate) {
2121 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2122 intermediate_state->bs = intermediate;
2123 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2125 if (intermediate->backing_hd == base) {
2126 base_bs = intermediate->backing_hd;
2129 intermediate = intermediate->backing_hd;
2131 if (base_bs == NULL) {
2132 /* something went wrong, we did not end at the base. safely
2133 * unravel everything, and exit with error */
2137 /* success - we can delete the intermediate states, and link top->base */
2138 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2139 base_bs->drv ? base_bs->drv->format_name : "");
2143 new_top_bs->backing_hd = base_bs;
2146 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2147 /* so that bdrv_close() does not recursively close the chain */
2148 intermediate_state->bs->backing_hd = NULL;
2149 bdrv_delete(intermediate_state->bs);
2154 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2155 g_free(intermediate_state);
2161 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2166 if (!bdrv_is_inserted(bs))
2172 len = bdrv_getlength(bs);
2177 if ((offset > len) || (len - offset < size))
2183 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2186 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2187 nb_sectors * BDRV_SECTOR_SIZE);
2190 typedef struct RwCo {
2191 BlockDriverState *bs;
2197 BdrvRequestFlags flags;
2200 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2202 RwCo *rwco = opaque;
2204 if (!rwco->is_write) {
2205 rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
2206 rwco->nb_sectors, rwco->qiov,
2209 rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
2210 rwco->nb_sectors, rwco->qiov,
2216 * Process a vectored synchronous request using coroutines
2218 static int bdrv_rwv_co(BlockDriverState *bs, int64_t sector_num,
2219 QEMUIOVector *qiov, bool is_write,
2220 BdrvRequestFlags flags)
2225 .sector_num = sector_num,
2226 .nb_sectors = qiov->size >> BDRV_SECTOR_BITS,
2228 .is_write = is_write,
2232 assert((qiov->size & (BDRV_SECTOR_SIZE - 1)) == 0);
2235 * In sync call context, when the vcpu is blocked, this throttling timer
2236 * will not fire; so the I/O throttling function has to be disabled here
2237 * if it has been enabled.
2239 if (bs->io_limits_enabled) {
2240 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2241 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2242 bdrv_io_limits_disable(bs);
2245 if (qemu_in_coroutine()) {
2246 /* Fast-path if already in coroutine context */
2247 bdrv_rw_co_entry(&rwco);
2249 co = qemu_coroutine_create(bdrv_rw_co_entry);
2250 qemu_coroutine_enter(co, &rwco);
2251 while (rwco.ret == NOT_DONE) {
2259 * Process a synchronous request using coroutines
2261 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2262 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2265 struct iovec iov = {
2266 .iov_base = (void *)buf,
2267 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2270 qemu_iovec_init_external(&qiov, &iov, 1);
2271 return bdrv_rwv_co(bs, sector_num, &qiov, is_write, flags);
2274 /* return < 0 if error. See bdrv_write() for the return codes */
2275 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2276 uint8_t *buf, int nb_sectors)
2278 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2281 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2282 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2283 uint8_t *buf, int nb_sectors)
2288 enabled = bs->io_limits_enabled;
2289 bs->io_limits_enabled = false;
2290 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2291 bs->io_limits_enabled = enabled;
2295 /* Return < 0 if error. Important errors are:
2296 -EIO generic I/O error (may happen for all errors)
2297 -ENOMEDIUM No media inserted.
2298 -EINVAL Invalid sector number or nb_sectors
2299 -EACCES Trying to write a read-only device
2301 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2302 const uint8_t *buf, int nb_sectors)
2304 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2307 int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov)
2309 return bdrv_rwv_co(bs, sector_num, qiov, true, 0);
2312 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
2314 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2315 BDRV_REQ_ZERO_WRITE);
2318 int bdrv_pread(BlockDriverState *bs, int64_t offset,
2319 void *buf, int count1)
2321 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2322 int len, nb_sectors, count;
2327 /* first read to align to sector start */
2328 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2331 sector_num = offset >> BDRV_SECTOR_BITS;
2333 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2335 memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
2343 /* read the sectors "in place" */
2344 nb_sectors = count >> BDRV_SECTOR_BITS;
2345 if (nb_sectors > 0) {
2346 if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
2348 sector_num += nb_sectors;
2349 len = nb_sectors << BDRV_SECTOR_BITS;
2354 /* add data from the last sector */
2356 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2358 memcpy(buf, tmp_buf, count);
2363 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2365 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2366 int len, nb_sectors, count;
2372 /* first write to align to sector start */
2373 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2376 sector_num = offset >> BDRV_SECTOR_BITS;
2378 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2380 qemu_iovec_to_buf(qiov, 0, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)),
2382 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2390 /* write the sectors "in place" */
2391 nb_sectors = count >> BDRV_SECTOR_BITS;
2392 if (nb_sectors > 0) {
2393 QEMUIOVector qiov_inplace;
2395 qemu_iovec_init(&qiov_inplace, qiov->niov);
2396 qemu_iovec_concat(&qiov_inplace, qiov, len,
2397 nb_sectors << BDRV_SECTOR_BITS);
2398 ret = bdrv_writev(bs, sector_num, &qiov_inplace);
2399 qemu_iovec_destroy(&qiov_inplace);
2404 sector_num += nb_sectors;
2405 len = nb_sectors << BDRV_SECTOR_BITS;
2409 /* add data from the last sector */
2411 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2413 qemu_iovec_to_buf(qiov, qiov->size - count, tmp_buf, count);
2414 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2420 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2421 const void *buf, int count1)
2424 struct iovec iov = {
2425 .iov_base = (void *) buf,
2429 qemu_iovec_init_external(&qiov, &iov, 1);
2430 return bdrv_pwritev(bs, offset, &qiov);
2434 * Writes to the file and ensures that no writes are reordered across this
2435 * request (acts as a barrier)
2437 * Returns 0 on success, -errno in error cases.
2439 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2440 const void *buf, int count)
2444 ret = bdrv_pwrite(bs, offset, buf, count);
2449 /* No flush needed for cache modes that already do it */
2450 if (bs->enable_write_cache) {
2457 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2458 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2460 /* Perform I/O through a temporary buffer so that users who scribble over
2461 * their read buffer while the operation is in progress do not end up
2462 * modifying the image file. This is critical for zero-copy guest I/O
2463 * where anything might happen inside guest memory.
2465 void *bounce_buffer;
2467 BlockDriver *drv = bs->drv;
2469 QEMUIOVector bounce_qiov;
2470 int64_t cluster_sector_num;
2471 int cluster_nb_sectors;
2475 /* Cover entire cluster so no additional backing file I/O is required when
2476 * allocating cluster in the image file.
2478 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2479 &cluster_sector_num, &cluster_nb_sectors);
2481 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2482 cluster_sector_num, cluster_nb_sectors);
2484 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2485 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2486 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2488 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2494 if (drv->bdrv_co_write_zeroes &&
2495 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2496 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2497 cluster_nb_sectors);
2499 /* This does not change the data on the disk, it is not necessary
2500 * to flush even in cache=writethrough mode.
2502 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2507 /* It might be okay to ignore write errors for guest requests. If this
2508 * is a deliberate copy-on-read then we don't want to ignore the error.
2509 * Simply report it in all cases.
2514 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2515 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2516 nb_sectors * BDRV_SECTOR_SIZE);
2519 qemu_vfree(bounce_buffer);
2524 * Handle a read request in coroutine context
2526 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
2527 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2528 BdrvRequestFlags flags)
2530 BlockDriver *drv = bs->drv;
2531 BdrvTrackedRequest req;
2537 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2541 /* throttling disk read I/O */
2542 if (bs->io_limits_enabled) {
2543 bdrv_io_limits_intercept(bs, false, nb_sectors);
2546 if (bs->copy_on_read) {
2547 flags |= BDRV_REQ_COPY_ON_READ;
2549 if (flags & BDRV_REQ_COPY_ON_READ) {
2550 bs->copy_on_read_in_flight++;
2553 if (bs->copy_on_read_in_flight) {
2554 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2557 tracked_request_begin(&req, bs, sector_num, nb_sectors, false);
2559 if (flags & BDRV_REQ_COPY_ON_READ) {
2562 ret = bdrv_co_is_allocated(bs, sector_num, nb_sectors, &pnum);
2567 if (!ret || pnum != nb_sectors) {
2568 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2573 if (!(bs->zero_beyond_eof && bs->growable)) {
2574 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2576 /* Read zeros after EOF of growable BDSes */
2577 int64_t len, total_sectors, max_nb_sectors;
2579 len = bdrv_getlength(bs);
2585 total_sectors = len >> BDRV_SECTOR_BITS;
2586 max_nb_sectors = MAX(0, total_sectors - sector_num);
2587 if (max_nb_sectors > 0) {
2588 ret = drv->bdrv_co_readv(bs, sector_num,
2589 MIN(nb_sectors, max_nb_sectors), qiov);
2594 /* Reading beyond end of file is supposed to produce zeroes */
2595 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2596 uint64_t offset = MAX(0, total_sectors - sector_num);
2597 uint64_t bytes = (sector_num + nb_sectors - offset) *
2599 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
2604 tracked_request_end(&req);
2606 if (flags & BDRV_REQ_COPY_ON_READ) {
2607 bs->copy_on_read_in_flight--;
2613 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
2614 int nb_sectors, QEMUIOVector *qiov)
2616 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
2618 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
2621 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
2622 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2624 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
2626 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
2627 BDRV_REQ_COPY_ON_READ);
2630 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
2631 int64_t sector_num, int nb_sectors)
2633 BlockDriver *drv = bs->drv;
2638 /* TODO Emulate only part of misaligned requests instead of letting block
2639 * drivers return -ENOTSUP and emulate everything */
2641 /* First try the efficient write zeroes operation */
2642 if (drv->bdrv_co_write_zeroes) {
2643 ret = drv->bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2644 if (ret != -ENOTSUP) {
2649 /* Fall back to bounce buffer if write zeroes is unsupported */
2650 iov.iov_len = nb_sectors * BDRV_SECTOR_SIZE;
2651 iov.iov_base = qemu_blockalign(bs, iov.iov_len);
2652 memset(iov.iov_base, 0, iov.iov_len);
2653 qemu_iovec_init_external(&qiov, &iov, 1);
2655 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, &qiov);
2657 qemu_vfree(iov.iov_base);
2662 * Handle a write request in coroutine context
2664 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
2665 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2666 BdrvRequestFlags flags)
2668 BlockDriver *drv = bs->drv;
2669 BdrvTrackedRequest req;
2675 if (bs->read_only) {
2678 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2682 /* throttling disk write I/O */
2683 if (bs->io_limits_enabled) {
2684 bdrv_io_limits_intercept(bs, true, nb_sectors);
2687 if (bs->copy_on_read_in_flight) {
2688 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2691 tracked_request_begin(&req, bs, sector_num, nb_sectors, true);
2693 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, &req);
2696 /* Do nothing, write notifier decided to fail this request */
2697 } else if (flags & BDRV_REQ_ZERO_WRITE) {
2698 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors);
2700 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
2703 if (ret == 0 && !bs->enable_write_cache) {
2704 ret = bdrv_co_flush(bs);
2707 if (bs->dirty_bitmap) {
2708 bdrv_set_dirty(bs, sector_num, nb_sectors);
2711 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
2712 bs->wr_highest_sector = sector_num + nb_sectors - 1;
2715 tracked_request_end(&req);
2720 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
2721 int nb_sectors, QEMUIOVector *qiov)
2723 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
2725 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
2728 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
2729 int64_t sector_num, int nb_sectors)
2731 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2733 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
2734 BDRV_REQ_ZERO_WRITE);
2738 * Truncate file to 'offset' bytes (needed only for file protocols)
2740 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
2742 BlockDriver *drv = bs->drv;
2746 if (!drv->bdrv_truncate)
2750 if (bdrv_in_use(bs))
2752 ret = drv->bdrv_truncate(bs, offset);
2754 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
2755 bdrv_dev_resize_cb(bs);
2761 * Length of a allocated file in bytes. Sparse files are counted by actual
2762 * allocated space. Return < 0 if error or unknown.
2764 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
2766 BlockDriver *drv = bs->drv;
2770 if (drv->bdrv_get_allocated_file_size) {
2771 return drv->bdrv_get_allocated_file_size(bs);
2774 return bdrv_get_allocated_file_size(bs->file);
2780 * Length of a file in bytes. Return < 0 if error or unknown.
2782 int64_t bdrv_getlength(BlockDriverState *bs)
2784 BlockDriver *drv = bs->drv;
2788 if (bs->growable || bdrv_dev_has_removable_media(bs)) {
2789 if (drv->bdrv_getlength) {
2790 return drv->bdrv_getlength(bs);
2793 return bs->total_sectors * BDRV_SECTOR_SIZE;
2796 /* return 0 as number of sectors if no device present or error */
2797 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
2800 length = bdrv_getlength(bs);
2804 length = length >> BDRV_SECTOR_BITS;
2805 *nb_sectors_ptr = length;
2808 /* throttling disk io limits */
2809 void bdrv_set_io_limits(BlockDriverState *bs,
2810 BlockIOLimit *io_limits)
2812 bs->io_limits = *io_limits;
2813 bs->io_limits_enabled = bdrv_io_limits_enabled(bs);
2816 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
2817 BlockdevOnError on_write_error)
2819 bs->on_read_error = on_read_error;
2820 bs->on_write_error = on_write_error;
2823 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
2825 return is_read ? bs->on_read_error : bs->on_write_error;
2828 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
2830 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
2833 case BLOCKDEV_ON_ERROR_ENOSPC:
2834 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
2835 case BLOCKDEV_ON_ERROR_STOP:
2836 return BDRV_ACTION_STOP;
2837 case BLOCKDEV_ON_ERROR_REPORT:
2838 return BDRV_ACTION_REPORT;
2839 case BLOCKDEV_ON_ERROR_IGNORE:
2840 return BDRV_ACTION_IGNORE;
2846 /* This is done by device models because, while the block layer knows
2847 * about the error, it does not know whether an operation comes from
2848 * the device or the block layer (from a job, for example).
2850 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
2851 bool is_read, int error)
2854 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
2855 if (action == BDRV_ACTION_STOP) {
2856 vm_stop(RUN_STATE_IO_ERROR);
2857 bdrv_iostatus_set_err(bs, error);
2861 int bdrv_is_read_only(BlockDriverState *bs)
2863 return bs->read_only;
2866 int bdrv_is_sg(BlockDriverState *bs)
2871 int bdrv_enable_write_cache(BlockDriverState *bs)
2873 return bs->enable_write_cache;
2876 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
2878 bs->enable_write_cache = wce;
2880 /* so a reopen() will preserve wce */
2882 bs->open_flags |= BDRV_O_CACHE_WB;
2884 bs->open_flags &= ~BDRV_O_CACHE_WB;
2888 int bdrv_is_encrypted(BlockDriverState *bs)
2890 if (bs->backing_hd && bs->backing_hd->encrypted)
2892 return bs->encrypted;
2895 int bdrv_key_required(BlockDriverState *bs)
2897 BlockDriverState *backing_hd = bs->backing_hd;
2899 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
2901 return (bs->encrypted && !bs->valid_key);
2904 int bdrv_set_key(BlockDriverState *bs, const char *key)
2907 if (bs->backing_hd && bs->backing_hd->encrypted) {
2908 ret = bdrv_set_key(bs->backing_hd, key);
2914 if (!bs->encrypted) {
2916 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
2919 ret = bs->drv->bdrv_set_key(bs, key);
2922 } else if (!bs->valid_key) {
2924 /* call the change callback now, we skipped it on open */
2925 bdrv_dev_change_media_cb(bs, true);
2930 const char *bdrv_get_format_name(BlockDriverState *bs)
2932 return bs->drv ? bs->drv->format_name : NULL;
2935 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
2940 QLIST_FOREACH(drv, &bdrv_drivers, list) {
2941 it(opaque, drv->format_name);
2945 BlockDriverState *bdrv_find(const char *name)
2947 BlockDriverState *bs;
2949 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2950 if (!strcmp(name, bs->device_name)) {
2957 BlockDriverState *bdrv_next(BlockDriverState *bs)
2960 return QTAILQ_FIRST(&bdrv_states);
2962 return QTAILQ_NEXT(bs, list);
2965 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
2967 BlockDriverState *bs;
2969 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2974 const char *bdrv_get_device_name(BlockDriverState *bs)
2976 return bs->device_name;
2979 int bdrv_get_flags(BlockDriverState *bs)
2981 return bs->open_flags;
2984 int bdrv_flush_all(void)
2986 BlockDriverState *bs;
2989 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2990 int ret = bdrv_flush(bs);
2991 if (ret < 0 && !result) {
2999 int bdrv_has_zero_init_1(BlockDriverState *bs)
3004 int bdrv_has_zero_init(BlockDriverState *bs)
3008 if (bs->drv->bdrv_has_zero_init) {
3009 return bs->drv->bdrv_has_zero_init(bs);
3016 typedef struct BdrvCoIsAllocatedData {
3017 BlockDriverState *bs;
3018 BlockDriverState *base;
3024 } BdrvCoIsAllocatedData;
3027 * Returns true iff the specified sector is present in the disk image. Drivers
3028 * not implementing the functionality are assumed to not support backing files,
3029 * hence all their sectors are reported as allocated.
3031 * If 'sector_num' is beyond the end of the disk image the return value is 0
3032 * and 'pnum' is set to 0.
3034 * 'pnum' is set to the number of sectors (including and immediately following
3035 * the specified sector) that are known to be in the same
3036 * allocated/unallocated state.
3038 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3039 * beyond the end of the disk image it will be clamped.
3041 int coroutine_fn bdrv_co_is_allocated(BlockDriverState *bs, int64_t sector_num,
3042 int nb_sectors, int *pnum)
3046 if (sector_num >= bs->total_sectors) {
3051 n = bs->total_sectors - sector_num;
3052 if (n < nb_sectors) {
3056 if (!bs->drv->bdrv_co_is_allocated) {
3061 return bs->drv->bdrv_co_is_allocated(bs, sector_num, nb_sectors, pnum);
3064 /* Coroutine wrapper for bdrv_is_allocated() */
3065 static void coroutine_fn bdrv_is_allocated_co_entry(void *opaque)
3067 BdrvCoIsAllocatedData *data = opaque;
3068 BlockDriverState *bs = data->bs;
3070 data->ret = bdrv_co_is_allocated(bs, data->sector_num, data->nb_sectors,
3076 * Synchronous wrapper around bdrv_co_is_allocated().
3078 * See bdrv_co_is_allocated() for details.
3080 int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
3084 BdrvCoIsAllocatedData data = {
3086 .sector_num = sector_num,
3087 .nb_sectors = nb_sectors,
3092 co = qemu_coroutine_create(bdrv_is_allocated_co_entry);
3093 qemu_coroutine_enter(co, &data);
3094 while (!data.done) {
3101 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3103 * Return true if the given sector is allocated in any image between
3104 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3105 * sector is allocated in any image of the chain. Return false otherwise.
3107 * 'pnum' is set to the number of sectors (including and immediately following
3108 * the specified sector) that are known to be in the same
3109 * allocated/unallocated state.
3112 int coroutine_fn bdrv_co_is_allocated_above(BlockDriverState *top,
3113 BlockDriverState *base,
3115 int nb_sectors, int *pnum)
3117 BlockDriverState *intermediate;
3118 int ret, n = nb_sectors;
3121 while (intermediate && intermediate != base) {
3123 ret = bdrv_co_is_allocated(intermediate, sector_num, nb_sectors,
3133 * [sector_num, nb_sectors] is unallocated on top but intermediate
3136 * [sector_num+x, nr_sectors] allocated.
3138 if (n > pnum_inter &&
3139 (intermediate == top ||
3140 sector_num + pnum_inter < intermediate->total_sectors)) {
3144 intermediate = intermediate->backing_hd;
3151 /* Coroutine wrapper for bdrv_is_allocated_above() */
3152 static void coroutine_fn bdrv_is_allocated_above_co_entry(void *opaque)
3154 BdrvCoIsAllocatedData *data = opaque;
3155 BlockDriverState *top = data->bs;
3156 BlockDriverState *base = data->base;
3158 data->ret = bdrv_co_is_allocated_above(top, base, data->sector_num,
3159 data->nb_sectors, data->pnum);
3164 * Synchronous wrapper around bdrv_co_is_allocated_above().
3166 * See bdrv_co_is_allocated_above() for details.
3168 int bdrv_is_allocated_above(BlockDriverState *top, BlockDriverState *base,
3169 int64_t sector_num, int nb_sectors, int *pnum)
3172 BdrvCoIsAllocatedData data = {
3175 .sector_num = sector_num,
3176 .nb_sectors = nb_sectors,
3181 co = qemu_coroutine_create(bdrv_is_allocated_above_co_entry);
3182 qemu_coroutine_enter(co, &data);
3183 while (!data.done) {
3189 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3191 if (bs->backing_hd && bs->backing_hd->encrypted)
3192 return bs->backing_file;
3193 else if (bs->encrypted)
3194 return bs->filename;
3199 void bdrv_get_backing_filename(BlockDriverState *bs,
3200 char *filename, int filename_size)
3202 pstrcpy(filename, filename_size, bs->backing_file);
3205 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3206 const uint8_t *buf, int nb_sectors)
3208 BlockDriver *drv = bs->drv;
3211 if (!drv->bdrv_write_compressed)
3213 if (bdrv_check_request(bs, sector_num, nb_sectors))
3216 assert(!bs->dirty_bitmap);
3218 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3221 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3223 BlockDriver *drv = bs->drv;
3226 if (!drv->bdrv_get_info)
3228 memset(bdi, 0, sizeof(*bdi));
3229 return drv->bdrv_get_info(bs, bdi);
3232 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3233 int64_t pos, int size)
3236 struct iovec iov = {
3237 .iov_base = (void *) buf,
3241 qemu_iovec_init_external(&qiov, &iov, 1);
3242 return bdrv_writev_vmstate(bs, &qiov, pos);
3245 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3247 BlockDriver *drv = bs->drv;
3251 } else if (drv->bdrv_save_vmstate) {
3252 return drv->bdrv_save_vmstate(bs, qiov, pos);
3253 } else if (bs->file) {
3254 return bdrv_writev_vmstate(bs->file, qiov, pos);
3260 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3261 int64_t pos, int size)
3263 BlockDriver *drv = bs->drv;
3266 if (drv->bdrv_load_vmstate)
3267 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3269 return bdrv_load_vmstate(bs->file, buf, pos, size);
3273 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
3275 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
3279 bs->drv->bdrv_debug_event(bs, event);
3282 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
3285 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
3289 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
3290 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
3296 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
3298 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
3302 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
3303 return bs->drv->bdrv_debug_resume(bs, tag);
3309 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
3311 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
3315 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
3316 return bs->drv->bdrv_debug_is_suspended(bs, tag);
3322 int bdrv_is_snapshot(BlockDriverState *bs)
3324 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
3327 /* backing_file can either be relative, or absolute, or a protocol. If it is
3328 * relative, it must be relative to the chain. So, passing in bs->filename
3329 * from a BDS as backing_file should not be done, as that may be relative to
3330 * the CWD rather than the chain. */
3331 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
3332 const char *backing_file)
3334 char *filename_full = NULL;
3335 char *backing_file_full = NULL;
3336 char *filename_tmp = NULL;
3337 int is_protocol = 0;
3338 BlockDriverState *curr_bs = NULL;
3339 BlockDriverState *retval = NULL;
3341 if (!bs || !bs->drv || !backing_file) {
3345 filename_full = g_malloc(PATH_MAX);
3346 backing_file_full = g_malloc(PATH_MAX);
3347 filename_tmp = g_malloc(PATH_MAX);
3349 is_protocol = path_has_protocol(backing_file);
3351 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
3353 /* If either of the filename paths is actually a protocol, then
3354 * compare unmodified paths; otherwise make paths relative */
3355 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
3356 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
3357 retval = curr_bs->backing_hd;
3361 /* If not an absolute filename path, make it relative to the current
3362 * image's filename path */
3363 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3366 /* We are going to compare absolute pathnames */
3367 if (!realpath(filename_tmp, filename_full)) {
3371 /* We need to make sure the backing filename we are comparing against
3372 * is relative to the current image filename (or absolute) */
3373 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3374 curr_bs->backing_file);
3376 if (!realpath(filename_tmp, backing_file_full)) {
3380 if (strcmp(backing_file_full, filename_full) == 0) {
3381 retval = curr_bs->backing_hd;
3387 g_free(filename_full);
3388 g_free(backing_file_full);
3389 g_free(filename_tmp);
3393 int bdrv_get_backing_file_depth(BlockDriverState *bs)
3399 if (!bs->backing_hd) {
3403 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
3406 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
3408 BlockDriverState *curr_bs = NULL;
3416 while (curr_bs->backing_hd) {
3417 curr_bs = curr_bs->backing_hd;
3422 /**************************************************************/
3425 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
3426 QEMUIOVector *qiov, int nb_sectors,
3427 BlockDriverCompletionFunc *cb, void *opaque)
3429 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
3431 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3435 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
3436 QEMUIOVector *qiov, int nb_sectors,
3437 BlockDriverCompletionFunc *cb, void *opaque)
3439 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
3441 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3446 typedef struct MultiwriteCB {
3451 BlockDriverCompletionFunc *cb;
3453 QEMUIOVector *free_qiov;
3457 static void multiwrite_user_cb(MultiwriteCB *mcb)
3461 for (i = 0; i < mcb->num_callbacks; i++) {
3462 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
3463 if (mcb->callbacks[i].free_qiov) {
3464 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
3466 g_free(mcb->callbacks[i].free_qiov);
3470 static void multiwrite_cb(void *opaque, int ret)
3472 MultiwriteCB *mcb = opaque;
3474 trace_multiwrite_cb(mcb, ret);
3476 if (ret < 0 && !mcb->error) {
3480 mcb->num_requests--;
3481 if (mcb->num_requests == 0) {
3482 multiwrite_user_cb(mcb);
3487 static int multiwrite_req_compare(const void *a, const void *b)
3489 const BlockRequest *req1 = a, *req2 = b;
3492 * Note that we can't simply subtract req2->sector from req1->sector
3493 * here as that could overflow the return value.
3495 if (req1->sector > req2->sector) {
3497 } else if (req1->sector < req2->sector) {
3505 * Takes a bunch of requests and tries to merge them. Returns the number of
3506 * requests that remain after merging.
3508 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
3509 int num_reqs, MultiwriteCB *mcb)
3513 // Sort requests by start sector
3514 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
3516 // Check if adjacent requests touch the same clusters. If so, combine them,
3517 // filling up gaps with zero sectors.
3519 for (i = 1; i < num_reqs; i++) {
3521 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
3523 // Handle exactly sequential writes and overlapping writes.
3524 if (reqs[i].sector <= oldreq_last) {
3528 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
3534 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
3535 qemu_iovec_init(qiov,
3536 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
3538 // Add the first request to the merged one. If the requests are
3539 // overlapping, drop the last sectors of the first request.
3540 size = (reqs[i].sector - reqs[outidx].sector) << 9;
3541 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
3543 // We should need to add any zeros between the two requests
3544 assert (reqs[i].sector <= oldreq_last);
3546 // Add the second request
3547 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
3549 reqs[outidx].nb_sectors = qiov->size >> 9;
3550 reqs[outidx].qiov = qiov;
3552 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
3555 reqs[outidx].sector = reqs[i].sector;
3556 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
3557 reqs[outidx].qiov = reqs[i].qiov;
3565 * Submit multiple AIO write requests at once.
3567 * On success, the function returns 0 and all requests in the reqs array have
3568 * been submitted. In error case this function returns -1, and any of the
3569 * requests may or may not be submitted yet. In particular, this means that the
3570 * callback will be called for some of the requests, for others it won't. The
3571 * caller must check the error field of the BlockRequest to wait for the right
3572 * callbacks (if error != 0, no callback will be called).
3574 * The implementation may modify the contents of the reqs array, e.g. to merge
3575 * requests. However, the fields opaque and error are left unmodified as they
3576 * are used to signal failure for a single request to the caller.
3578 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
3583 /* don't submit writes if we don't have a medium */
3584 if (bs->drv == NULL) {
3585 for (i = 0; i < num_reqs; i++) {
3586 reqs[i].error = -ENOMEDIUM;
3591 if (num_reqs == 0) {
3595 // Create MultiwriteCB structure
3596 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
3597 mcb->num_requests = 0;
3598 mcb->num_callbacks = num_reqs;
3600 for (i = 0; i < num_reqs; i++) {
3601 mcb->callbacks[i].cb = reqs[i].cb;
3602 mcb->callbacks[i].opaque = reqs[i].opaque;
3605 // Check for mergable requests
3606 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
3608 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
3610 /* Run the aio requests. */
3611 mcb->num_requests = num_reqs;
3612 for (i = 0; i < num_reqs; i++) {
3613 bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
3614 reqs[i].nb_sectors, multiwrite_cb, mcb);
3620 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
3622 acb->aiocb_info->cancel(acb);
3625 /* block I/O throttling */
3626 static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
3627 bool is_write, double elapsed_time, uint64_t *wait)
3629 uint64_t bps_limit = 0;
3631 double bytes_limit, bytes_base, bytes_res;
3632 double slice_time, wait_time;
3634 if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
3635 bps_limit = bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
3636 } else if (bs->io_limits.bps[is_write]) {
3637 bps_limit = bs->io_limits.bps[is_write];
3646 slice_time = bs->slice_end - bs->slice_start;
3647 slice_time /= (NANOSECONDS_PER_SECOND);
3648 bytes_limit = bps_limit * slice_time;
3649 bytes_base = bs->slice_submitted.bytes[is_write];
3650 if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
3651 bytes_base += bs->slice_submitted.bytes[!is_write];
3654 /* bytes_base: the bytes of data which have been read/written; and
3655 * it is obtained from the history statistic info.
3656 * bytes_res: the remaining bytes of data which need to be read/written.
3657 * (bytes_base + bytes_res) / bps_limit: used to calcuate
3658 * the total time for completing reading/writting all data.
3660 bytes_res = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;
3662 if (bytes_base + bytes_res <= bytes_limit) {
3670 /* Calc approx time to dispatch */
3671 wait_time = (bytes_base + bytes_res) / bps_limit - elapsed_time;
3673 /* When the I/O rate at runtime exceeds the limits,
3674 * bs->slice_end need to be extended in order that the current statistic
3675 * info can be kept until the timer fire, so it is increased and tuned
3676 * based on the result of experiment.
3678 extension = wait_time * NANOSECONDS_PER_SECOND;
3679 extension = DIV_ROUND_UP(extension, BLOCK_IO_SLICE_TIME) *
3680 BLOCK_IO_SLICE_TIME;
3681 bs->slice_end += extension;
3683 *wait = wait_time * NANOSECONDS_PER_SECOND;
3689 static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
3690 double elapsed_time, uint64_t *wait)
3692 uint64_t iops_limit = 0;
3693 double ios_limit, ios_base;
3694 double slice_time, wait_time;
3696 if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
3697 iops_limit = bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
3698 } else if (bs->io_limits.iops[is_write]) {
3699 iops_limit = bs->io_limits.iops[is_write];
3708 slice_time = bs->slice_end - bs->slice_start;
3709 slice_time /= (NANOSECONDS_PER_SECOND);
3710 ios_limit = iops_limit * slice_time;
3711 ios_base = bs->slice_submitted.ios[is_write];
3712 if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
3713 ios_base += bs->slice_submitted.ios[!is_write];
3716 if (ios_base + 1 <= ios_limit) {
3724 /* Calc approx time to dispatch, in seconds */
3725 wait_time = (ios_base + 1) / iops_limit;
3726 if (wait_time > elapsed_time) {
3727 wait_time = wait_time - elapsed_time;
3732 /* Exceeded current slice, extend it by another slice time */
3733 bs->slice_end += BLOCK_IO_SLICE_TIME;
3735 *wait = wait_time * NANOSECONDS_PER_SECOND;
3741 static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
3742 bool is_write, int64_t *wait)
3744 int64_t now, max_wait;
3745 uint64_t bps_wait = 0, iops_wait = 0;
3746 double elapsed_time;
3747 int bps_ret, iops_ret;
3749 now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
3750 if (now > bs->slice_end) {
3751 bs->slice_start = now;
3752 bs->slice_end = now + BLOCK_IO_SLICE_TIME;
3753 memset(&bs->slice_submitted, 0, sizeof(bs->slice_submitted));
3756 elapsed_time = now - bs->slice_start;
3757 elapsed_time /= (NANOSECONDS_PER_SECOND);
3759 bps_ret = bdrv_exceed_bps_limits(bs, nb_sectors,
3760 is_write, elapsed_time, &bps_wait);
3761 iops_ret = bdrv_exceed_iops_limits(bs, is_write,
3762 elapsed_time, &iops_wait);
3763 if (bps_ret || iops_ret) {
3764 max_wait = bps_wait > iops_wait ? bps_wait : iops_wait;
3769 now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
3770 if (bs->slice_end < now + max_wait) {
3771 bs->slice_end = now + max_wait;
3781 bs->slice_submitted.bytes[is_write] += (int64_t)nb_sectors *
3783 bs->slice_submitted.ios[is_write]++;
3788 /**************************************************************/
3789 /* async block device emulation */
3791 typedef struct BlockDriverAIOCBSync {
3792 BlockDriverAIOCB common;
3795 /* vector translation state */
3799 } BlockDriverAIOCBSync;
3801 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
3803 BlockDriverAIOCBSync *acb =
3804 container_of(blockacb, BlockDriverAIOCBSync, common);
3805 qemu_bh_delete(acb->bh);
3807 qemu_aio_release(acb);
3810 static const AIOCBInfo bdrv_em_aiocb_info = {
3811 .aiocb_size = sizeof(BlockDriverAIOCBSync),
3812 .cancel = bdrv_aio_cancel_em,
3815 static void bdrv_aio_bh_cb(void *opaque)
3817 BlockDriverAIOCBSync *acb = opaque;
3820 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
3821 qemu_vfree(acb->bounce);
3822 acb->common.cb(acb->common.opaque, acb->ret);
3823 qemu_bh_delete(acb->bh);
3825 qemu_aio_release(acb);
3828 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
3832 BlockDriverCompletionFunc *cb,
3837 BlockDriverAIOCBSync *acb;
3839 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
3840 acb->is_write = is_write;
3842 acb->bounce = qemu_blockalign(bs, qiov->size);
3843 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
3846 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
3847 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
3849 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
3852 qemu_bh_schedule(acb->bh);
3854 return &acb->common;
3857 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
3858 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3859 BlockDriverCompletionFunc *cb, void *opaque)
3861 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
3864 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
3865 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3866 BlockDriverCompletionFunc *cb, void *opaque)
3868 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
3872 typedef struct BlockDriverAIOCBCoroutine {
3873 BlockDriverAIOCB common;
3878 } BlockDriverAIOCBCoroutine;
3880 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
3882 BlockDriverAIOCBCoroutine *acb =
3883 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
3892 static const AIOCBInfo bdrv_em_co_aiocb_info = {
3893 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
3894 .cancel = bdrv_aio_co_cancel_em,
3897 static void bdrv_co_em_bh(void *opaque)
3899 BlockDriverAIOCBCoroutine *acb = opaque;
3901 acb->common.cb(acb->common.opaque, acb->req.error);
3907 qemu_bh_delete(acb->bh);
3908 qemu_aio_release(acb);
3911 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3912 static void coroutine_fn bdrv_co_do_rw(void *opaque)
3914 BlockDriverAIOCBCoroutine *acb = opaque;
3915 BlockDriverState *bs = acb->common.bs;
3917 if (!acb->is_write) {
3918 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
3919 acb->req.nb_sectors, acb->req.qiov, 0);
3921 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
3922 acb->req.nb_sectors, acb->req.qiov, 0);
3925 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3926 qemu_bh_schedule(acb->bh);
3929 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
3933 BlockDriverCompletionFunc *cb,
3938 BlockDriverAIOCBCoroutine *acb;
3940 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
3941 acb->req.sector = sector_num;
3942 acb->req.nb_sectors = nb_sectors;
3943 acb->req.qiov = qiov;
3944 acb->is_write = is_write;
3947 co = qemu_coroutine_create(bdrv_co_do_rw);
3948 qemu_coroutine_enter(co, acb);
3950 return &acb->common;
3953 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
3955 BlockDriverAIOCBCoroutine *acb = opaque;
3956 BlockDriverState *bs = acb->common.bs;
3958 acb->req.error = bdrv_co_flush(bs);
3959 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3960 qemu_bh_schedule(acb->bh);
3963 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
3964 BlockDriverCompletionFunc *cb, void *opaque)
3966 trace_bdrv_aio_flush(bs, opaque);
3969 BlockDriverAIOCBCoroutine *acb;
3971 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
3974 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
3975 qemu_coroutine_enter(co, acb);
3977 return &acb->common;
3980 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
3982 BlockDriverAIOCBCoroutine *acb = opaque;
3983 BlockDriverState *bs = acb->common.bs;
3985 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
3986 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3987 qemu_bh_schedule(acb->bh);
3990 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
3991 int64_t sector_num, int nb_sectors,
3992 BlockDriverCompletionFunc *cb, void *opaque)
3995 BlockDriverAIOCBCoroutine *acb;
3997 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
3999 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4000 acb->req.sector = sector_num;
4001 acb->req.nb_sectors = nb_sectors;
4003 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4004 qemu_coroutine_enter(co, acb);
4006 return &acb->common;
4009 void bdrv_init(void)
4011 module_call_init(MODULE_INIT_BLOCK);
4014 void bdrv_init_with_whitelist(void)
4016 use_bdrv_whitelist = 1;
4020 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4021 BlockDriverCompletionFunc *cb, void *opaque)
4023 BlockDriverAIOCB *acb;
4025 acb = g_slice_alloc(aiocb_info->aiocb_size);
4026 acb->aiocb_info = aiocb_info;
4029 acb->opaque = opaque;
4033 void qemu_aio_release(void *p)
4035 BlockDriverAIOCB *acb = p;
4036 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4039 /**************************************************************/
4040 /* Coroutine block device emulation */
4042 typedef struct CoroutineIOCompletion {
4043 Coroutine *coroutine;
4045 } CoroutineIOCompletion;
4047 static void bdrv_co_io_em_complete(void *opaque, int ret)
4049 CoroutineIOCompletion *co = opaque;
4052 qemu_coroutine_enter(co->coroutine, NULL);
4055 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4056 int nb_sectors, QEMUIOVector *iov,
4059 CoroutineIOCompletion co = {
4060 .coroutine = qemu_coroutine_self(),
4062 BlockDriverAIOCB *acb;
4065 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4066 bdrv_co_io_em_complete, &co);
4068 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4069 bdrv_co_io_em_complete, &co);
4072 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4076 qemu_coroutine_yield();
4081 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4082 int64_t sector_num, int nb_sectors,
4085 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4088 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4089 int64_t sector_num, int nb_sectors,
4092 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4095 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4097 RwCo *rwco = opaque;
4099 rwco->ret = bdrv_co_flush(rwco->bs);
4102 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4106 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4110 /* Write back cached data to the OS even with cache=unsafe */
4111 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4112 if (bs->drv->bdrv_co_flush_to_os) {
4113 ret = bs->drv->bdrv_co_flush_to_os(bs);
4119 /* But don't actually force it to the disk with cache=unsafe */
4120 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4124 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4125 if (bs->drv->bdrv_co_flush_to_disk) {
4126 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4127 } else if (bs->drv->bdrv_aio_flush) {
4128 BlockDriverAIOCB *acb;
4129 CoroutineIOCompletion co = {
4130 .coroutine = qemu_coroutine_self(),
4133 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4137 qemu_coroutine_yield();
4142 * Some block drivers always operate in either writethrough or unsafe
4143 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4144 * know how the server works (because the behaviour is hardcoded or
4145 * depends on server-side configuration), so we can't ensure that
4146 * everything is safe on disk. Returning an error doesn't work because
4147 * that would break guests even if the server operates in writethrough
4150 * Let's hope the user knows what he's doing.
4158 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4159 * in the case of cache=unsafe, so there are no useless flushes.
4162 return bdrv_co_flush(bs->file);
4165 void bdrv_invalidate_cache(BlockDriverState *bs)
4167 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4168 bs->drv->bdrv_invalidate_cache(bs);
4172 void bdrv_invalidate_cache_all(void)
4174 BlockDriverState *bs;
4176 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4177 bdrv_invalidate_cache(bs);
4181 void bdrv_clear_incoming_migration_all(void)
4183 BlockDriverState *bs;
4185 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4186 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4190 int bdrv_flush(BlockDriverState *bs)
4198 if (qemu_in_coroutine()) {
4199 /* Fast-path if already in coroutine context */
4200 bdrv_flush_co_entry(&rwco);
4202 co = qemu_coroutine_create(bdrv_flush_co_entry);
4203 qemu_coroutine_enter(co, &rwco);
4204 while (rwco.ret == NOT_DONE) {
4212 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4214 RwCo *rwco = opaque;
4216 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4219 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4224 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4226 } else if (bs->read_only) {
4230 if (bs->dirty_bitmap) {
4231 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4234 /* Do nothing if disabled. */
4235 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4239 if (bs->drv->bdrv_co_discard) {
4240 return bs->drv->bdrv_co_discard(bs, sector_num, nb_sectors);
4241 } else if (bs->drv->bdrv_aio_discard) {
4242 BlockDriverAIOCB *acb;
4243 CoroutineIOCompletion co = {
4244 .coroutine = qemu_coroutine_self(),
4247 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4248 bdrv_co_io_em_complete, &co);
4252 qemu_coroutine_yield();
4260 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4265 .sector_num = sector_num,
4266 .nb_sectors = nb_sectors,
4270 if (qemu_in_coroutine()) {
4271 /* Fast-path if already in coroutine context */
4272 bdrv_discard_co_entry(&rwco);
4274 co = qemu_coroutine_create(bdrv_discard_co_entry);
4275 qemu_coroutine_enter(co, &rwco);
4276 while (rwco.ret == NOT_DONE) {
4284 /**************************************************************/
4285 /* removable device support */
4288 * Return TRUE if the media is present
4290 int bdrv_is_inserted(BlockDriverState *bs)
4292 BlockDriver *drv = bs->drv;
4296 if (!drv->bdrv_is_inserted)
4298 return drv->bdrv_is_inserted(bs);
4302 * Return whether the media changed since the last call to this
4303 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4305 int bdrv_media_changed(BlockDriverState *bs)
4307 BlockDriver *drv = bs->drv;
4309 if (drv && drv->bdrv_media_changed) {
4310 return drv->bdrv_media_changed(bs);
4316 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4318 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4320 BlockDriver *drv = bs->drv;
4322 if (drv && drv->bdrv_eject) {
4323 drv->bdrv_eject(bs, eject_flag);
4326 if (bs->device_name[0] != '\0') {
4327 bdrv_emit_qmp_eject_event(bs, eject_flag);
4332 * Lock or unlock the media (if it is locked, the user won't be able
4333 * to eject it manually).
4335 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4337 BlockDriver *drv = bs->drv;
4339 trace_bdrv_lock_medium(bs, locked);
4341 if (drv && drv->bdrv_lock_medium) {
4342 drv->bdrv_lock_medium(bs, locked);
4346 /* needed for generic scsi interface */
4348 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4350 BlockDriver *drv = bs->drv;
4352 if (drv && drv->bdrv_ioctl)
4353 return drv->bdrv_ioctl(bs, req, buf);
4357 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4358 unsigned long int req, void *buf,
4359 BlockDriverCompletionFunc *cb, void *opaque)
4361 BlockDriver *drv = bs->drv;
4363 if (drv && drv->bdrv_aio_ioctl)
4364 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4368 void bdrv_set_buffer_alignment(BlockDriverState *bs, int align)
4370 bs->buffer_alignment = align;
4373 void *qemu_blockalign(BlockDriverState *bs, size_t size)
4375 return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size);
4379 * Check if all memory in this vector is sector aligned.
4381 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
4385 for (i = 0; i < qiov->niov; i++) {
4386 if ((uintptr_t) qiov->iov[i].iov_base % bs->buffer_alignment) {
4394 void bdrv_set_dirty_tracking(BlockDriverState *bs, int granularity)
4396 int64_t bitmap_size;
4398 assert((granularity & (granularity - 1)) == 0);
4401 granularity >>= BDRV_SECTOR_BITS;
4402 assert(!bs->dirty_bitmap);
4403 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
4404 bs->dirty_bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
4406 if (bs->dirty_bitmap) {
4407 hbitmap_free(bs->dirty_bitmap);
4408 bs->dirty_bitmap = NULL;
4413 int bdrv_get_dirty(BlockDriverState *bs, int64_t sector)
4415 if (bs->dirty_bitmap) {
4416 return hbitmap_get(bs->dirty_bitmap, sector);
4422 void bdrv_dirty_iter_init(BlockDriverState *bs, HBitmapIter *hbi)
4424 hbitmap_iter_init(hbi, bs->dirty_bitmap, 0);
4427 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
4430 hbitmap_set(bs->dirty_bitmap, cur_sector, nr_sectors);
4433 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector,
4436 hbitmap_reset(bs->dirty_bitmap, cur_sector, nr_sectors);
4439 int64_t bdrv_get_dirty_count(BlockDriverState *bs)
4441 if (bs->dirty_bitmap) {
4442 return hbitmap_count(bs->dirty_bitmap);
4448 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
4450 assert(bs->in_use != in_use);
4451 bs->in_use = in_use;
4454 int bdrv_in_use(BlockDriverState *bs)
4459 void bdrv_iostatus_enable(BlockDriverState *bs)
4461 bs->iostatus_enabled = true;
4462 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4465 /* The I/O status is only enabled if the drive explicitly
4466 * enables it _and_ the VM is configured to stop on errors */
4467 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
4469 return (bs->iostatus_enabled &&
4470 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
4471 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
4472 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
4475 void bdrv_iostatus_disable(BlockDriverState *bs)
4477 bs->iostatus_enabled = false;
4480 void bdrv_iostatus_reset(BlockDriverState *bs)
4482 if (bdrv_iostatus_is_enabled(bs)) {
4483 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4485 block_job_iostatus_reset(bs->job);
4490 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
4492 assert(bdrv_iostatus_is_enabled(bs));
4493 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
4494 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
4495 BLOCK_DEVICE_IO_STATUS_FAILED;
4500 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
4501 enum BlockAcctType type)
4503 assert(type < BDRV_MAX_IOTYPE);
4505 cookie->bytes = bytes;
4506 cookie->start_time_ns = get_clock();
4507 cookie->type = type;
4511 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
4513 assert(cookie->type < BDRV_MAX_IOTYPE);
4515 bs->nr_bytes[cookie->type] += cookie->bytes;
4516 bs->nr_ops[cookie->type]++;
4517 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
4520 void bdrv_img_create(const char *filename, const char *fmt,
4521 const char *base_filename, const char *base_fmt,
4522 char *options, uint64_t img_size, int flags,
4523 Error **errp, bool quiet)
4525 QEMUOptionParameter *param = NULL, *create_options = NULL;
4526 QEMUOptionParameter *backing_fmt, *backing_file, *size;
4527 BlockDriverState *bs = NULL;
4528 BlockDriver *drv, *proto_drv;
4529 BlockDriver *backing_drv = NULL;
4532 /* Find driver and parse its options */
4533 drv = bdrv_find_format(fmt);
4535 error_setg(errp, "Unknown file format '%s'", fmt);
4539 proto_drv = bdrv_find_protocol(filename, true);
4541 error_setg(errp, "Unknown protocol '%s'", filename);
4545 create_options = append_option_parameters(create_options,
4546 drv->create_options);
4547 create_options = append_option_parameters(create_options,
4548 proto_drv->create_options);
4550 /* Create parameter list with default values */
4551 param = parse_option_parameters("", create_options, param);
4553 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
4555 /* Parse -o options */
4557 param = parse_option_parameters(options, create_options, param);
4558 if (param == NULL) {
4559 error_setg(errp, "Invalid options for file format '%s'.", fmt);
4564 if (base_filename) {
4565 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
4567 error_setg(errp, "Backing file not supported for file format '%s'",
4574 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
4575 error_setg(errp, "Backing file format not supported for file "
4576 "format '%s'", fmt);
4581 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
4582 if (backing_file && backing_file->value.s) {
4583 if (!strcmp(filename, backing_file->value.s)) {
4584 error_setg(errp, "Error: Trying to create an image with the "
4585 "same filename as the backing file");
4590 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
4591 if (backing_fmt && backing_fmt->value.s) {
4592 backing_drv = bdrv_find_format(backing_fmt->value.s);
4594 error_setg(errp, "Unknown backing file format '%s'",
4595 backing_fmt->value.s);
4600 // The size for the image must always be specified, with one exception:
4601 // If we are using a backing file, we can obtain the size from there
4602 size = get_option_parameter(param, BLOCK_OPT_SIZE);
4603 if (size && size->value.n == -1) {
4604 if (backing_file && backing_file->value.s) {
4609 /* backing files always opened read-only */
4611 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
4615 ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
4618 error_setg_errno(errp, -ret, "Could not open '%s'",
4619 backing_file->value.s);
4622 bdrv_get_geometry(bs, &size);
4625 snprintf(buf, sizeof(buf), "%" PRId64, size);
4626 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
4628 error_setg(errp, "Image creation needs a size parameter");
4634 printf("Formatting '%s', fmt=%s ", filename, fmt);
4635 print_option_parameters(param);
4638 ret = bdrv_create(drv, filename, param);
4640 if (ret == -ENOTSUP) {
4641 error_setg(errp,"Formatting or formatting option not supported for "
4642 "file format '%s'", fmt);
4643 } else if (ret == -EFBIG) {
4644 const char *cluster_size_hint = "";
4645 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
4646 cluster_size_hint = " (try using a larger cluster size)";
4648 error_setg(errp, "The image size is too large for file format '%s'%s",
4649 fmt, cluster_size_hint);
4651 error_setg(errp, "%s: error while creating %s: %s", filename, fmt,
4657 free_option_parameters(create_options);
4658 free_option_parameters(param);
4665 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
4667 /* Currently BlockDriverState always uses the main loop AioContext */
4668 return qemu_get_aio_context();
4671 void bdrv_add_before_write_notifier(BlockDriverState *bs,
4672 NotifierWithReturn *notifier)
4674 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);