2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
54 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
55 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
56 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
57 BlockDriverCompletionFunc *cb, void *opaque);
58 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
59 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
60 BlockDriverCompletionFunc *cb, void *opaque);
61 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
62 int64_t sector_num, int nb_sectors,
64 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
65 int64_t sector_num, int nb_sectors,
67 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
69 BdrvRequestFlags flags);
70 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
72 BdrvRequestFlags flags);
73 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
77 BlockDriverCompletionFunc *cb,
80 static void coroutine_fn bdrv_co_do_rw(void *opaque);
81 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
82 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
84 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
85 QTAILQ_HEAD_INITIALIZER(bdrv_states);
87 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
88 QLIST_HEAD_INITIALIZER(bdrv_drivers);
90 /* If non-zero, use only whitelisted block drivers */
91 static int use_bdrv_whitelist;
94 static int is_windows_drive_prefix(const char *filename)
96 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
97 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
101 int is_windows_drive(const char *filename)
103 if (is_windows_drive_prefix(filename) &&
106 if (strstart(filename, "\\\\.\\", NULL) ||
107 strstart(filename, "//./", NULL))
113 /* throttling disk I/O limits */
114 void bdrv_set_io_limits(BlockDriverState *bs,
119 throttle_config(&bs->throttle_state, cfg);
121 for (i = 0; i < 2; i++) {
122 qemu_co_enter_next(&bs->throttled_reqs[i]);
126 /* this function drain all the throttled IOs */
127 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
129 bool drained = false;
130 bool enabled = bs->io_limits_enabled;
133 bs->io_limits_enabled = false;
135 for (i = 0; i < 2; i++) {
136 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
141 bs->io_limits_enabled = enabled;
146 void bdrv_io_limits_disable(BlockDriverState *bs)
148 bs->io_limits_enabled = false;
150 bdrv_start_throttled_reqs(bs);
152 throttle_destroy(&bs->throttle_state);
155 static void bdrv_throttle_read_timer_cb(void *opaque)
157 BlockDriverState *bs = opaque;
158 qemu_co_enter_next(&bs->throttled_reqs[0]);
161 static void bdrv_throttle_write_timer_cb(void *opaque)
163 BlockDriverState *bs = opaque;
164 qemu_co_enter_next(&bs->throttled_reqs[1]);
167 /* should be called before bdrv_set_io_limits if a limit is set */
168 void bdrv_io_limits_enable(BlockDriverState *bs)
170 assert(!bs->io_limits_enabled);
171 throttle_init(&bs->throttle_state,
173 bdrv_throttle_read_timer_cb,
174 bdrv_throttle_write_timer_cb,
176 bs->io_limits_enabled = true;
179 /* This function makes an IO wait if needed
181 * @nb_sectors: the number of sectors of the IO
182 * @is_write: is the IO a write
184 static void bdrv_io_limits_intercept(BlockDriverState *bs,
188 /* does this io must wait */
189 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
191 /* if must wait or any request of this type throttled queue the IO */
193 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
194 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
197 /* the IO will be executed, do the accounting */
198 throttle_account(&bs->throttle_state,
200 nb_sectors * BDRV_SECTOR_SIZE);
202 /* if the next request must wait -> do nothing */
203 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
207 /* else queue next request for execution */
208 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
211 /* check if the path starts with "<protocol>:" */
212 static int path_has_protocol(const char *path)
217 if (is_windows_drive(path) ||
218 is_windows_drive_prefix(path)) {
221 p = path + strcspn(path, ":/\\");
223 p = path + strcspn(path, ":/");
229 int path_is_absolute(const char *path)
232 /* specific case for names like: "\\.\d:" */
233 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
236 return (*path == '/' || *path == '\\');
238 return (*path == '/');
242 /* if filename is absolute, just copy it to dest. Otherwise, build a
243 path to it by considering it is relative to base_path. URL are
245 void path_combine(char *dest, int dest_size,
246 const char *base_path,
247 const char *filename)
254 if (path_is_absolute(filename)) {
255 pstrcpy(dest, dest_size, filename);
257 p = strchr(base_path, ':');
262 p1 = strrchr(base_path, '/');
266 p2 = strrchr(base_path, '\\');
278 if (len > dest_size - 1)
280 memcpy(dest, base_path, len);
282 pstrcat(dest, dest_size, filename);
286 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
288 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
289 pstrcpy(dest, sz, bs->backing_file);
291 path_combine(dest, sz, bs->filename, bs->backing_file);
295 void bdrv_register(BlockDriver *bdrv)
297 /* Block drivers without coroutine functions need emulation */
298 if (!bdrv->bdrv_co_readv) {
299 bdrv->bdrv_co_readv = bdrv_co_readv_em;
300 bdrv->bdrv_co_writev = bdrv_co_writev_em;
302 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
303 * the block driver lacks aio we need to emulate that too.
305 if (!bdrv->bdrv_aio_readv) {
306 /* add AIO emulation layer */
307 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
308 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
312 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
315 /* create a new block device (by default it is empty) */
316 BlockDriverState *bdrv_new(const char *device_name)
318 BlockDriverState *bs;
320 bs = g_malloc0(sizeof(BlockDriverState));
321 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
322 if (device_name[0] != '\0') {
323 QTAILQ_INSERT_TAIL(&bdrv_states, bs, list);
325 bdrv_iostatus_disable(bs);
326 notifier_list_init(&bs->close_notifiers);
327 notifier_with_return_list_init(&bs->before_write_notifiers);
328 qemu_co_queue_init(&bs->throttled_reqs[0]);
329 qemu_co_queue_init(&bs->throttled_reqs[1]);
335 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
337 notifier_list_add(&bs->close_notifiers, notify);
340 BlockDriver *bdrv_find_format(const char *format_name)
343 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
344 if (!strcmp(drv1->format_name, format_name)) {
351 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
353 static const char *whitelist_rw[] = {
354 CONFIG_BDRV_RW_WHITELIST
356 static const char *whitelist_ro[] = {
357 CONFIG_BDRV_RO_WHITELIST
361 if (!whitelist_rw[0] && !whitelist_ro[0]) {
362 return 1; /* no whitelist, anything goes */
365 for (p = whitelist_rw; *p; p++) {
366 if (!strcmp(drv->format_name, *p)) {
371 for (p = whitelist_ro; *p; p++) {
372 if (!strcmp(drv->format_name, *p)) {
380 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
383 BlockDriver *drv = bdrv_find_format(format_name);
384 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
387 typedef struct CreateCo {
390 QEMUOptionParameter *options;
395 static void coroutine_fn bdrv_create_co_entry(void *opaque)
397 Error *local_err = NULL;
400 CreateCo *cco = opaque;
403 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
404 if (error_is_set(&local_err)) {
405 error_propagate(&cco->err, local_err);
410 int bdrv_create(BlockDriver *drv, const char* filename,
411 QEMUOptionParameter *options, Error **errp)
418 .filename = g_strdup(filename),
424 if (!drv->bdrv_create) {
425 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
430 if (qemu_in_coroutine()) {
431 /* Fast-path if already in coroutine context */
432 bdrv_create_co_entry(&cco);
434 co = qemu_coroutine_create(bdrv_create_co_entry);
435 qemu_coroutine_enter(co, &cco);
436 while (cco.ret == NOT_DONE) {
443 if (error_is_set(&cco.err)) {
444 error_propagate(errp, cco.err);
446 error_setg_errno(errp, -ret, "Could not create image");
451 g_free(cco.filename);
455 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
459 Error *local_err = NULL;
462 drv = bdrv_find_protocol(filename, true);
464 error_setg(errp, "Could not find protocol for file '%s'", filename);
468 ret = bdrv_create(drv, filename, options, &local_err);
469 if (error_is_set(&local_err)) {
470 error_propagate(errp, local_err);
476 * Create a uniquely-named empty temporary file.
477 * Return 0 upon success, otherwise a negative errno value.
479 int get_tmp_filename(char *filename, int size)
482 char temp_dir[MAX_PATH];
483 /* GetTempFileName requires that its output buffer (4th param)
484 have length MAX_PATH or greater. */
485 assert(size >= MAX_PATH);
486 return (GetTempPath(MAX_PATH, temp_dir)
487 && GetTempFileName(temp_dir, "qem", 0, filename)
488 ? 0 : -GetLastError());
492 tmpdir = getenv("TMPDIR");
495 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
498 fd = mkstemp(filename);
502 if (close(fd) != 0) {
511 * Detect host devices. By convention, /dev/cdrom[N] is always
512 * recognized as a host CDROM.
514 static BlockDriver *find_hdev_driver(const char *filename)
516 int score_max = 0, score;
517 BlockDriver *drv = NULL, *d;
519 QLIST_FOREACH(d, &bdrv_drivers, list) {
520 if (d->bdrv_probe_device) {
521 score = d->bdrv_probe_device(filename);
522 if (score > score_max) {
532 BlockDriver *bdrv_find_protocol(const char *filename,
533 bool allow_protocol_prefix)
540 /* TODO Drivers without bdrv_file_open must be specified explicitly */
543 * XXX(hch): we really should not let host device detection
544 * override an explicit protocol specification, but moving this
545 * later breaks access to device names with colons in them.
546 * Thanks to the brain-dead persistent naming schemes on udev-
547 * based Linux systems those actually are quite common.
549 drv1 = find_hdev_driver(filename);
554 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
555 return bdrv_find_format("file");
558 p = strchr(filename, ':');
561 if (len > sizeof(protocol) - 1)
562 len = sizeof(protocol) - 1;
563 memcpy(protocol, filename, len);
564 protocol[len] = '\0';
565 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
566 if (drv1->protocol_name &&
567 !strcmp(drv1->protocol_name, protocol)) {
574 static int find_image_format(BlockDriverState *bs, const char *filename,
575 BlockDriver **pdrv, Error **errp)
577 int score, score_max;
578 BlockDriver *drv1, *drv;
582 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
583 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
584 drv = bdrv_find_format("raw");
586 error_setg(errp, "Could not find raw image format");
593 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
595 error_setg_errno(errp, -ret, "Could not read image for determining its "
603 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
604 if (drv1->bdrv_probe) {
605 score = drv1->bdrv_probe(buf, ret, filename);
606 if (score > score_max) {
613 error_setg(errp, "Could not determine image format: No compatible "
622 * Set the current 'total_sectors' value
624 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
626 BlockDriver *drv = bs->drv;
628 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
632 /* query actual device if possible, otherwise just trust the hint */
633 if (drv->bdrv_getlength) {
634 int64_t length = drv->bdrv_getlength(bs);
638 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
641 bs->total_sectors = hint;
646 * Set open flags for a given discard mode
648 * Return 0 on success, -1 if the discard mode was invalid.
650 int bdrv_parse_discard_flags(const char *mode, int *flags)
652 *flags &= ~BDRV_O_UNMAP;
654 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
656 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
657 *flags |= BDRV_O_UNMAP;
666 * Set open flags for a given cache mode
668 * Return 0 on success, -1 if the cache mode was invalid.
670 int bdrv_parse_cache_flags(const char *mode, int *flags)
672 *flags &= ~BDRV_O_CACHE_MASK;
674 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
675 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
676 } else if (!strcmp(mode, "directsync")) {
677 *flags |= BDRV_O_NOCACHE;
678 } else if (!strcmp(mode, "writeback")) {
679 *flags |= BDRV_O_CACHE_WB;
680 } else if (!strcmp(mode, "unsafe")) {
681 *flags |= BDRV_O_CACHE_WB;
682 *flags |= BDRV_O_NO_FLUSH;
683 } else if (!strcmp(mode, "writethrough")) {
684 /* this is the default */
693 * The copy-on-read flag is actually a reference count so multiple users may
694 * use the feature without worrying about clobbering its previous state.
695 * Copy-on-read stays enabled until all users have called to disable it.
697 void bdrv_enable_copy_on_read(BlockDriverState *bs)
702 void bdrv_disable_copy_on_read(BlockDriverState *bs)
704 assert(bs->copy_on_read > 0);
708 static int bdrv_open_flags(BlockDriverState *bs, int flags)
710 int open_flags = flags | BDRV_O_CACHE_WB;
713 * Clear flags that are internal to the block layer before opening the
716 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
719 * Snapshots should be writable.
721 if (bs->is_temporary) {
722 open_flags |= BDRV_O_RDWR;
729 * Common part for opening disk images and files
731 * Removes all processed options from *options.
733 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
734 QDict *options, int flags, BlockDriver *drv, Error **errp)
737 const char *filename;
738 Error *local_err = NULL;
741 assert(bs->file == NULL);
742 assert(options != NULL && bs->options != options);
745 filename = file->filename;
747 filename = qdict_get_try_str(options, "filename");
750 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
752 /* bdrv_open() with directly using a protocol as drv. This layer is already
753 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
754 * and return immediately. */
755 if (file != NULL && drv->bdrv_file_open) {
760 bs->open_flags = flags;
761 bs->buffer_alignment = 512;
762 bs->zero_beyond_eof = true;
763 open_flags = bdrv_open_flags(bs, flags);
764 bs->read_only = !(open_flags & BDRV_O_RDWR);
766 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
768 !bs->read_only && bdrv_is_whitelisted(drv, true)
769 ? "Driver '%s' can only be used for read-only devices"
770 : "Driver '%s' is not whitelisted",
775 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
776 if (flags & BDRV_O_COPY_ON_READ) {
777 if (!bs->read_only) {
778 bdrv_enable_copy_on_read(bs);
780 error_setg(errp, "Can't use copy-on-read on read-only device");
785 if (filename != NULL) {
786 pstrcpy(bs->filename, sizeof(bs->filename), filename);
788 bs->filename[0] = '\0';
792 bs->opaque = g_malloc0(drv->instance_size);
794 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
796 /* Open the image, either directly or using a protocol */
797 if (drv->bdrv_file_open) {
798 assert(file == NULL);
799 assert(!drv->bdrv_needs_filename || filename != NULL);
800 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
803 error_setg(errp, "Can't use '%s' as a block driver for the "
804 "protocol level", drv->format_name);
809 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
813 if (error_is_set(&local_err)) {
814 error_propagate(errp, local_err);
815 } else if (bs->filename[0]) {
816 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
818 error_setg_errno(errp, -ret, "Could not open image");
823 ret = refresh_total_sectors(bs, bs->total_sectors);
825 error_setg_errno(errp, -ret, "Could not refresh total sector count");
830 if (bs->is_temporary) {
831 assert(bs->filename[0] != '\0');
832 unlink(bs->filename);
846 * Opens a file using a protocol (file, host_device, nbd, ...)
848 * options is a QDict of options to pass to the block drivers, or NULL for an
849 * empty set of options. The reference to the QDict belongs to the block layer
850 * after the call (even on failure), so if the caller intends to reuse the
851 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
853 int bdrv_file_open(BlockDriverState **pbs, const char *filename,
854 QDict *options, int flags, Error **errp)
856 BlockDriverState *bs;
859 bool allow_protocol_prefix = false;
860 Error *local_err = NULL;
863 /* NULL means an empty set of options */
864 if (options == NULL) {
865 options = qdict_new();
869 bs->options = options;
870 options = qdict_clone_shallow(options);
872 /* Fetch the file name from the options QDict if necessary */
874 filename = qdict_get_try_str(options, "filename");
875 } else if (filename && !qdict_haskey(options, "filename")) {
876 qdict_put(options, "filename", qstring_from_str(filename));
877 allow_protocol_prefix = true;
879 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
885 /* Find the right block driver */
886 drvname = qdict_get_try_str(options, "driver");
888 drv = bdrv_find_format(drvname);
890 error_setg(errp, "Unknown driver '%s'", drvname);
892 qdict_del(options, "driver");
893 } else if (filename) {
894 drv = bdrv_find_protocol(filename, allow_protocol_prefix);
896 error_setg(errp, "Unknown protocol");
899 error_setg(errp, "Must specify either driver or file");
904 /* errp has been set already */
909 /* Parse the filename and open it */
910 if (drv->bdrv_parse_filename && filename) {
911 drv->bdrv_parse_filename(filename, options, &local_err);
912 if (error_is_set(&local_err)) {
913 error_propagate(errp, local_err);
917 qdict_del(options, "filename");
918 } else if (drv->bdrv_needs_filename && !filename) {
919 error_setg(errp, "The '%s' block driver requires a file name",
925 ret = bdrv_open_common(bs, NULL, options, flags, drv, &local_err);
927 error_propagate(errp, local_err);
931 /* Check if any unknown options were used */
932 if (qdict_size(options) != 0) {
933 const QDictEntry *entry = qdict_first(options);
934 error_setg(errp, "Block protocol '%s' doesn't support the option '%s'",
935 drv->format_name, entry->key);
948 QDECREF(bs->options);
955 * Opens the backing file for a BlockDriverState if not yet open
957 * options is a QDict of options to pass to the block drivers, or NULL for an
958 * empty set of options. The reference to the QDict is transferred to this
959 * function (even on failure), so if the caller intends to reuse the dictionary,
960 * it needs to use QINCREF() before calling bdrv_file_open.
962 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
964 char backing_filename[PATH_MAX];
966 BlockDriver *back_drv = NULL;
967 Error *local_err = NULL;
969 if (bs->backing_hd != NULL) {
974 /* NULL means an empty set of options */
975 if (options == NULL) {
976 options = qdict_new();
979 bs->open_flags &= ~BDRV_O_NO_BACKING;
980 if (qdict_haskey(options, "file.filename")) {
981 backing_filename[0] = '\0';
982 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
986 bdrv_get_full_backing_filename(bs, backing_filename,
987 sizeof(backing_filename));
990 bs->backing_hd = bdrv_new("");
992 if (bs->backing_format[0] != '\0') {
993 back_drv = bdrv_find_format(bs->backing_format);
996 /* backing files always opened read-only */
997 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
998 BDRV_O_COPY_ON_READ);
1000 ret = bdrv_open(bs->backing_hd,
1001 *backing_filename ? backing_filename : NULL, options,
1002 back_flags, back_drv, &local_err);
1004 bdrv_unref(bs->backing_hd);
1005 bs->backing_hd = NULL;
1006 bs->open_flags |= BDRV_O_NO_BACKING;
1007 error_setg(errp, "Could not open backing file: %s",
1008 error_get_pretty(local_err));
1009 error_free(local_err);
1012 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1013 bs->backing_hd->file->filename);
1018 * Opens a disk image (raw, qcow2, vmdk, ...)
1020 * options is a QDict of options to pass to the block drivers, or NULL for an
1021 * empty set of options. The reference to the QDict belongs to the block layer
1022 * after the call (even on failure), so if the caller intends to reuse the
1023 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1025 int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
1026 int flags, BlockDriver *drv, Error **errp)
1029 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1030 char tmp_filename[PATH_MAX + 1];
1031 BlockDriverState *file = NULL;
1032 QDict *file_options = NULL;
1033 const char *drvname;
1034 Error *local_err = NULL;
1036 /* NULL means an empty set of options */
1037 if (options == NULL) {
1038 options = qdict_new();
1041 bs->options = options;
1042 options = qdict_clone_shallow(options);
1044 /* For snapshot=on, create a temporary qcow2 overlay */
1045 if (flags & BDRV_O_SNAPSHOT) {
1046 BlockDriverState *bs1;
1048 BlockDriver *bdrv_qcow2;
1049 QEMUOptionParameter *create_options;
1050 char backing_filename[PATH_MAX];
1052 if (qdict_size(options) != 0) {
1053 error_setg(errp, "Can't use snapshot=on with driver-specific options");
1057 assert(filename != NULL);
1059 /* if snapshot, we create a temporary backing file and open it
1060 instead of opening 'filename' directly */
1062 /* if there is a backing file, use it */
1064 ret = bdrv_open(bs1, filename, NULL, 0, drv, &local_err);
1069 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1073 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1075 error_setg_errno(errp, -ret, "Could not get temporary filename");
1079 /* Real path is meaningless for protocols */
1080 if (path_has_protocol(filename)) {
1081 snprintf(backing_filename, sizeof(backing_filename),
1083 } else if (!realpath(filename, backing_filename)) {
1085 error_setg_errno(errp, errno, "Could not resolve path '%s'", filename);
1089 bdrv_qcow2 = bdrv_find_format("qcow2");
1090 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1093 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1094 set_option_parameter(create_options, BLOCK_OPT_BACKING_FILE,
1097 set_option_parameter(create_options, BLOCK_OPT_BACKING_FMT,
1101 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1102 free_option_parameters(create_options);
1104 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1105 "'%s': %s", tmp_filename,
1106 error_get_pretty(local_err));
1107 error_free(local_err);
1112 filename = tmp_filename;
1114 bs->is_temporary = 1;
1117 /* Open image file without format layer */
1118 if (flags & BDRV_O_RDWR) {
1119 flags |= BDRV_O_ALLOW_RDWR;
1122 qdict_extract_subqdict(options, &file_options, "file.");
1124 ret = bdrv_file_open(&file, filename, file_options,
1125 bdrv_open_flags(bs, flags | BDRV_O_UNMAP), &local_err);
1130 /* Find the right image format driver */
1131 drvname = qdict_get_try_str(options, "driver");
1133 drv = bdrv_find_format(drvname);
1134 qdict_del(options, "driver");
1136 error_setg(errp, "Invalid driver: '%s'", drvname);
1138 goto unlink_and_fail;
1143 ret = find_image_format(file, filename, &drv, &local_err);
1147 goto unlink_and_fail;
1150 /* Open the image */
1151 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1153 goto unlink_and_fail;
1156 if (bs->file != file) {
1161 /* If there is a backing file, use it */
1162 if ((flags & BDRV_O_NO_BACKING) == 0) {
1163 QDict *backing_options;
1165 qdict_extract_subqdict(options, &backing_options, "backing.");
1166 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1168 goto close_and_fail;
1172 /* Check if any unknown options were used */
1173 if (qdict_size(options) != 0) {
1174 const QDictEntry *entry = qdict_first(options);
1175 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1176 "support the option '%s'", drv->format_name, bs->device_name,
1180 goto close_and_fail;
1184 if (!bdrv_key_required(bs)) {
1185 bdrv_dev_change_media_cb(bs, true);
1194 if (bs->is_temporary) {
1198 QDECREF(bs->options);
1201 if (error_is_set(&local_err)) {
1202 error_propagate(errp, local_err);
1209 if (error_is_set(&local_err)) {
1210 error_propagate(errp, local_err);
1215 typedef struct BlockReopenQueueEntry {
1217 BDRVReopenState state;
1218 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1219 } BlockReopenQueueEntry;
1222 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1223 * reopen of multiple devices.
1225 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1226 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1227 * be created and initialized. This newly created BlockReopenQueue should be
1228 * passed back in for subsequent calls that are intended to be of the same
1231 * bs is the BlockDriverState to add to the reopen queue.
1233 * flags contains the open flags for the associated bs
1235 * returns a pointer to bs_queue, which is either the newly allocated
1236 * bs_queue, or the existing bs_queue being used.
1239 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1240 BlockDriverState *bs, int flags)
1244 BlockReopenQueueEntry *bs_entry;
1245 if (bs_queue == NULL) {
1246 bs_queue = g_new0(BlockReopenQueue, 1);
1247 QSIMPLEQ_INIT(bs_queue);
1251 bdrv_reopen_queue(bs_queue, bs->file, flags);
1254 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1255 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1257 bs_entry->state.bs = bs;
1258 bs_entry->state.flags = flags;
1264 * Reopen multiple BlockDriverStates atomically & transactionally.
1266 * The queue passed in (bs_queue) must have been built up previous
1267 * via bdrv_reopen_queue().
1269 * Reopens all BDS specified in the queue, with the appropriate
1270 * flags. All devices are prepared for reopen, and failure of any
1271 * device will cause all device changes to be abandonded, and intermediate
1274 * If all devices prepare successfully, then the changes are committed
1278 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1281 BlockReopenQueueEntry *bs_entry, *next;
1282 Error *local_err = NULL;
1284 assert(bs_queue != NULL);
1288 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1289 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1290 error_propagate(errp, local_err);
1293 bs_entry->prepared = true;
1296 /* If we reach this point, we have success and just need to apply the
1299 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1300 bdrv_reopen_commit(&bs_entry->state);
1306 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1307 if (ret && bs_entry->prepared) {
1308 bdrv_reopen_abort(&bs_entry->state);
1317 /* Reopen a single BlockDriverState with the specified flags. */
1318 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1321 Error *local_err = NULL;
1322 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1324 ret = bdrv_reopen_multiple(queue, &local_err);
1325 if (local_err != NULL) {
1326 error_propagate(errp, local_err);
1333 * Prepares a BlockDriverState for reopen. All changes are staged in the
1334 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1335 * the block driver layer .bdrv_reopen_prepare()
1337 * bs is the BlockDriverState to reopen
1338 * flags are the new open flags
1339 * queue is the reopen queue
1341 * Returns 0 on success, non-zero on error. On error errp will be set
1344 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1345 * It is the responsibility of the caller to then call the abort() or
1346 * commit() for any other BDS that have been left in a prepare() state
1349 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1353 Error *local_err = NULL;
1356 assert(reopen_state != NULL);
1357 assert(reopen_state->bs->drv != NULL);
1358 drv = reopen_state->bs->drv;
1360 /* if we are to stay read-only, do not allow permission change
1362 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1363 reopen_state->flags & BDRV_O_RDWR) {
1364 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1365 reopen_state->bs->device_name);
1370 ret = bdrv_flush(reopen_state->bs);
1372 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1377 if (drv->bdrv_reopen_prepare) {
1378 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1380 if (local_err != NULL) {
1381 error_propagate(errp, local_err);
1383 error_setg(errp, "failed while preparing to reopen image '%s'",
1384 reopen_state->bs->filename);
1389 /* It is currently mandatory to have a bdrv_reopen_prepare()
1390 * handler for each supported drv. */
1391 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1392 drv->format_name, reopen_state->bs->device_name,
1393 "reopening of file");
1405 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1406 * makes them final by swapping the staging BlockDriverState contents into
1407 * the active BlockDriverState contents.
1409 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1413 assert(reopen_state != NULL);
1414 drv = reopen_state->bs->drv;
1415 assert(drv != NULL);
1417 /* If there are any driver level actions to take */
1418 if (drv->bdrv_reopen_commit) {
1419 drv->bdrv_reopen_commit(reopen_state);
1422 /* set BDS specific flags now */
1423 reopen_state->bs->open_flags = reopen_state->flags;
1424 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1426 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1430 * Abort the reopen, and delete and free the staged changes in
1433 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1437 assert(reopen_state != NULL);
1438 drv = reopen_state->bs->drv;
1439 assert(drv != NULL);
1441 if (drv->bdrv_reopen_abort) {
1442 drv->bdrv_reopen_abort(reopen_state);
1447 void bdrv_close(BlockDriverState *bs)
1450 block_job_cancel_sync(bs->job);
1452 bdrv_drain_all(); /* complete I/O */
1454 bdrv_drain_all(); /* in case flush left pending I/O */
1455 notifier_list_notify(&bs->close_notifiers, bs);
1458 if (bs->backing_hd) {
1459 bdrv_unref(bs->backing_hd);
1460 bs->backing_hd = NULL;
1462 bs->drv->bdrv_close(bs);
1465 if (bs->is_temporary) {
1466 unlink(bs->filename);
1471 bs->copy_on_read = 0;
1472 bs->backing_file[0] = '\0';
1473 bs->backing_format[0] = '\0';
1474 bs->total_sectors = 0;
1479 bs->zero_beyond_eof = false;
1480 QDECREF(bs->options);
1483 if (bs->file != NULL) {
1484 bdrv_unref(bs->file);
1489 bdrv_dev_change_media_cb(bs, false);
1491 /*throttling disk I/O limits*/
1492 if (bs->io_limits_enabled) {
1493 bdrv_io_limits_disable(bs);
1497 void bdrv_close_all(void)
1499 BlockDriverState *bs;
1501 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1506 /* Check if any requests are in-flight (including throttled requests) */
1507 static bool bdrv_requests_pending(BlockDriverState *bs)
1509 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1512 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1515 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1518 if (bs->file && bdrv_requests_pending(bs->file)) {
1521 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1527 static bool bdrv_requests_pending_all(void)
1529 BlockDriverState *bs;
1530 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1531 if (bdrv_requests_pending(bs)) {
1539 * Wait for pending requests to complete across all BlockDriverStates
1541 * This function does not flush data to disk, use bdrv_flush_all() for that
1542 * after calling this function.
1544 * Note that completion of an asynchronous I/O operation can trigger any
1545 * number of other I/O operations on other devices---for example a coroutine
1546 * can be arbitrarily complex and a constant flow of I/O can come until the
1547 * coroutine is complete. Because of this, it is not possible to have a
1548 * function to drain a single device's I/O queue.
1550 void bdrv_drain_all(void)
1552 /* Always run first iteration so any pending completion BHs run */
1554 BlockDriverState *bs;
1557 /* FIXME: We do not have timer support here, so this is effectively
1560 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1561 if (bdrv_start_throttled_reqs(bs)) {
1566 busy = bdrv_requests_pending_all();
1567 busy |= aio_poll(qemu_get_aio_context(), busy);
1571 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1572 Also, NULL terminate the device_name to prevent double remove */
1573 void bdrv_make_anon(BlockDriverState *bs)
1575 if (bs->device_name[0] != '\0') {
1576 QTAILQ_REMOVE(&bdrv_states, bs, list);
1578 bs->device_name[0] = '\0';
1581 static void bdrv_rebind(BlockDriverState *bs)
1583 if (bs->drv && bs->drv->bdrv_rebind) {
1584 bs->drv->bdrv_rebind(bs);
1588 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1589 BlockDriverState *bs_src)
1591 /* move some fields that need to stay attached to the device */
1592 bs_dest->open_flags = bs_src->open_flags;
1595 bs_dest->dev_ops = bs_src->dev_ops;
1596 bs_dest->dev_opaque = bs_src->dev_opaque;
1597 bs_dest->dev = bs_src->dev;
1598 bs_dest->buffer_alignment = bs_src->buffer_alignment;
1599 bs_dest->copy_on_read = bs_src->copy_on_read;
1601 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1603 /* i/o throttled req */
1604 memcpy(&bs_dest->throttle_state,
1605 &bs_src->throttle_state,
1606 sizeof(ThrottleState));
1607 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1608 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1609 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1612 bs_dest->on_read_error = bs_src->on_read_error;
1613 bs_dest->on_write_error = bs_src->on_write_error;
1616 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1617 bs_dest->iostatus = bs_src->iostatus;
1620 bs_dest->dirty_bitmap = bs_src->dirty_bitmap;
1622 /* reference count */
1623 bs_dest->refcnt = bs_src->refcnt;
1626 bs_dest->in_use = bs_src->in_use;
1627 bs_dest->job = bs_src->job;
1629 /* keep the same entry in bdrv_states */
1630 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1631 bs_src->device_name);
1632 bs_dest->list = bs_src->list;
1636 * Swap bs contents for two image chains while they are live,
1637 * while keeping required fields on the BlockDriverState that is
1638 * actually attached to a device.
1640 * This will modify the BlockDriverState fields, and swap contents
1641 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1643 * bs_new is required to be anonymous.
1645 * This function does not create any image files.
1647 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1649 BlockDriverState tmp;
1651 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1652 assert(bs_new->device_name[0] == '\0');
1653 assert(bs_new->dirty_bitmap == NULL);
1654 assert(bs_new->job == NULL);
1655 assert(bs_new->dev == NULL);
1656 assert(bs_new->in_use == 0);
1657 assert(bs_new->io_limits_enabled == false);
1658 assert(!throttle_have_timer(&bs_new->throttle_state));
1664 /* there are some fields that should not be swapped, move them back */
1665 bdrv_move_feature_fields(&tmp, bs_old);
1666 bdrv_move_feature_fields(bs_old, bs_new);
1667 bdrv_move_feature_fields(bs_new, &tmp);
1669 /* bs_new shouldn't be in bdrv_states even after the swap! */
1670 assert(bs_new->device_name[0] == '\0');
1672 /* Check a few fields that should remain attached to the device */
1673 assert(bs_new->dev == NULL);
1674 assert(bs_new->job == NULL);
1675 assert(bs_new->in_use == 0);
1676 assert(bs_new->io_limits_enabled == false);
1677 assert(!throttle_have_timer(&bs_new->throttle_state));
1679 bdrv_rebind(bs_new);
1680 bdrv_rebind(bs_old);
1684 * Add new bs contents at the top of an image chain while the chain is
1685 * live, while keeping required fields on the top layer.
1687 * This will modify the BlockDriverState fields, and swap contents
1688 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1690 * bs_new is required to be anonymous.
1692 * This function does not create any image files.
1694 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1696 bdrv_swap(bs_new, bs_top);
1698 /* The contents of 'tmp' will become bs_top, as we are
1699 * swapping bs_new and bs_top contents. */
1700 bs_top->backing_hd = bs_new;
1701 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1702 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1704 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1705 bs_new->drv ? bs_new->drv->format_name : "");
1708 static void bdrv_delete(BlockDriverState *bs)
1712 assert(!bs->in_use);
1713 assert(!bs->refcnt);
1717 /* remove from list, if necessary */
1723 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1724 /* TODO change to DeviceState *dev when all users are qdevified */
1730 bdrv_iostatus_reset(bs);
1734 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1735 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1737 if (bdrv_attach_dev(bs, dev) < 0) {
1742 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1743 /* TODO change to DeviceState *dev when all users are qdevified */
1745 assert(bs->dev == dev);
1748 bs->dev_opaque = NULL;
1749 bs->buffer_alignment = 512;
1752 /* TODO change to return DeviceState * when all users are qdevified */
1753 void *bdrv_get_attached_dev(BlockDriverState *bs)
1758 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1762 bs->dev_opaque = opaque;
1765 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1766 enum MonitorEvent ev,
1767 BlockErrorAction action, bool is_read)
1770 const char *action_str;
1773 case BDRV_ACTION_REPORT:
1774 action_str = "report";
1776 case BDRV_ACTION_IGNORE:
1777 action_str = "ignore";
1779 case BDRV_ACTION_STOP:
1780 action_str = "stop";
1786 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1789 is_read ? "read" : "write");
1790 monitor_protocol_event(ev, data);
1792 qobject_decref(data);
1795 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
1799 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1800 bdrv_get_device_name(bs), ejected);
1801 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
1803 qobject_decref(data);
1806 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
1808 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
1809 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
1810 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
1811 if (tray_was_closed) {
1813 bdrv_emit_qmp_eject_event(bs, true);
1817 bdrv_emit_qmp_eject_event(bs, false);
1822 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
1824 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
1827 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
1829 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
1830 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
1834 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
1836 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
1837 return bs->dev_ops->is_tray_open(bs->dev_opaque);
1842 static void bdrv_dev_resize_cb(BlockDriverState *bs)
1844 if (bs->dev_ops && bs->dev_ops->resize_cb) {
1845 bs->dev_ops->resize_cb(bs->dev_opaque);
1849 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
1851 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
1852 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
1858 * Run consistency checks on an image
1860 * Returns 0 if the check could be completed (it doesn't mean that the image is
1861 * free of errors) or -errno when an internal error occurred. The results of the
1862 * check are stored in res.
1864 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
1866 if (bs->drv->bdrv_check == NULL) {
1870 memset(res, 0, sizeof(*res));
1871 return bs->drv->bdrv_check(bs, res, fix);
1874 #define COMMIT_BUF_SECTORS 2048
1876 /* commit COW file into the raw image */
1877 int bdrv_commit(BlockDriverState *bs)
1879 BlockDriver *drv = bs->drv;
1880 int64_t sector, total_sectors;
1881 int n, ro, open_flags;
1884 char filename[PATH_MAX];
1889 if (!bs->backing_hd) {
1893 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
1897 ro = bs->backing_hd->read_only;
1898 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1899 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
1900 open_flags = bs->backing_hd->open_flags;
1903 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
1908 total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
1909 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
1911 for (sector = 0; sector < total_sectors; sector += n) {
1912 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
1917 if (bdrv_read(bs, sector, buf, n) != 0) {
1922 if (bdrv_write(bs->backing_hd, sector, buf, n) != 0) {
1929 if (drv->bdrv_make_empty) {
1930 ret = drv->bdrv_make_empty(bs);
1935 * Make sure all data we wrote to the backing device is actually
1939 bdrv_flush(bs->backing_hd);
1945 /* ignoring error return here */
1946 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
1952 int bdrv_commit_all(void)
1954 BlockDriverState *bs;
1956 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1957 if (bs->drv && bs->backing_hd) {
1958 int ret = bdrv_commit(bs);
1968 * Remove an active request from the tracked requests list
1970 * This function should be called when a tracked request is completing.
1972 static void tracked_request_end(BdrvTrackedRequest *req)
1974 QLIST_REMOVE(req, list);
1975 qemu_co_queue_restart_all(&req->wait_queue);
1979 * Add an active request to the tracked requests list
1981 static void tracked_request_begin(BdrvTrackedRequest *req,
1982 BlockDriverState *bs,
1984 int nb_sectors, bool is_write)
1986 *req = (BdrvTrackedRequest){
1988 .sector_num = sector_num,
1989 .nb_sectors = nb_sectors,
1990 .is_write = is_write,
1991 .co = qemu_coroutine_self(),
1994 qemu_co_queue_init(&req->wait_queue);
1996 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2000 * Round a region to cluster boundaries
2002 void bdrv_round_to_clusters(BlockDriverState *bs,
2003 int64_t sector_num, int nb_sectors,
2004 int64_t *cluster_sector_num,
2005 int *cluster_nb_sectors)
2007 BlockDriverInfo bdi;
2009 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2010 *cluster_sector_num = sector_num;
2011 *cluster_nb_sectors = nb_sectors;
2013 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2014 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2015 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2020 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2021 int64_t sector_num, int nb_sectors) {
2023 if (sector_num >= req->sector_num + req->nb_sectors) {
2027 if (req->sector_num >= sector_num + nb_sectors) {
2033 static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
2034 int64_t sector_num, int nb_sectors)
2036 BdrvTrackedRequest *req;
2037 int64_t cluster_sector_num;
2038 int cluster_nb_sectors;
2041 /* If we touch the same cluster it counts as an overlap. This guarantees
2042 * that allocating writes will be serialized and not race with each other
2043 * for the same cluster. For example, in copy-on-read it ensures that the
2044 * CoR read and write operations are atomic and guest writes cannot
2045 * interleave between them.
2047 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2048 &cluster_sector_num, &cluster_nb_sectors);
2052 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2053 if (tracked_request_overlaps(req, cluster_sector_num,
2054 cluster_nb_sectors)) {
2055 /* Hitting this means there was a reentrant request, for
2056 * example, a block driver issuing nested requests. This must
2057 * never happen since it means deadlock.
2059 assert(qemu_coroutine_self() != req->co);
2061 qemu_co_queue_wait(&req->wait_queue);
2072 * -EINVAL - backing format specified, but no file
2073 * -ENOSPC - can't update the backing file because no space is left in the
2075 * -ENOTSUP - format driver doesn't support changing the backing file
2077 int bdrv_change_backing_file(BlockDriverState *bs,
2078 const char *backing_file, const char *backing_fmt)
2080 BlockDriver *drv = bs->drv;
2083 /* Backing file format doesn't make sense without a backing file */
2084 if (backing_fmt && !backing_file) {
2088 if (drv->bdrv_change_backing_file != NULL) {
2089 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2095 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2096 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2102 * Finds the image layer in the chain that has 'bs' as its backing file.
2104 * active is the current topmost image.
2106 * Returns NULL if bs is not found in active's image chain,
2107 * or if active == bs.
2109 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2110 BlockDriverState *bs)
2112 BlockDriverState *overlay = NULL;
2113 BlockDriverState *intermediate;
2115 assert(active != NULL);
2118 /* if bs is the same as active, then by definition it has no overlay
2124 intermediate = active;
2125 while (intermediate->backing_hd) {
2126 if (intermediate->backing_hd == bs) {
2127 overlay = intermediate;
2130 intermediate = intermediate->backing_hd;
2136 typedef struct BlkIntermediateStates {
2137 BlockDriverState *bs;
2138 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2139 } BlkIntermediateStates;
2143 * Drops images above 'base' up to and including 'top', and sets the image
2144 * above 'top' to have base as its backing file.
2146 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2147 * information in 'bs' can be properly updated.
2149 * E.g., this will convert the following chain:
2150 * bottom <- base <- intermediate <- top <- active
2154 * bottom <- base <- active
2156 * It is allowed for bottom==base, in which case it converts:
2158 * base <- intermediate <- top <- active
2165 * if active == top, that is considered an error
2168 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2169 BlockDriverState *base)
2171 BlockDriverState *intermediate;
2172 BlockDriverState *base_bs = NULL;
2173 BlockDriverState *new_top_bs = NULL;
2174 BlkIntermediateStates *intermediate_state, *next;
2177 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2178 QSIMPLEQ_INIT(&states_to_delete);
2180 if (!top->drv || !base->drv) {
2184 new_top_bs = bdrv_find_overlay(active, top);
2186 if (new_top_bs == NULL) {
2187 /* we could not find the image above 'top', this is an error */
2191 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2192 * to do, no intermediate images */
2193 if (new_top_bs->backing_hd == base) {
2200 /* now we will go down through the list, and add each BDS we find
2201 * into our deletion queue, until we hit the 'base'
2203 while (intermediate) {
2204 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2205 intermediate_state->bs = intermediate;
2206 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2208 if (intermediate->backing_hd == base) {
2209 base_bs = intermediate->backing_hd;
2212 intermediate = intermediate->backing_hd;
2214 if (base_bs == NULL) {
2215 /* something went wrong, we did not end at the base. safely
2216 * unravel everything, and exit with error */
2220 /* success - we can delete the intermediate states, and link top->base */
2221 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2222 base_bs->drv ? base_bs->drv->format_name : "");
2226 new_top_bs->backing_hd = base_bs;
2229 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2230 /* so that bdrv_close() does not recursively close the chain */
2231 intermediate_state->bs->backing_hd = NULL;
2232 bdrv_unref(intermediate_state->bs);
2237 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2238 g_free(intermediate_state);
2244 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2249 if (!bdrv_is_inserted(bs))
2255 len = bdrv_getlength(bs);
2260 if ((offset > len) || (len - offset < size))
2266 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2269 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2270 nb_sectors * BDRV_SECTOR_SIZE);
2273 typedef struct RwCo {
2274 BlockDriverState *bs;
2280 BdrvRequestFlags flags;
2283 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2285 RwCo *rwco = opaque;
2287 if (!rwco->is_write) {
2288 rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
2289 rwco->nb_sectors, rwco->qiov,
2292 rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
2293 rwco->nb_sectors, rwco->qiov,
2299 * Process a vectored synchronous request using coroutines
2301 static int bdrv_rwv_co(BlockDriverState *bs, int64_t sector_num,
2302 QEMUIOVector *qiov, bool is_write,
2303 BdrvRequestFlags flags)
2308 .sector_num = sector_num,
2309 .nb_sectors = qiov->size >> BDRV_SECTOR_BITS,
2311 .is_write = is_write,
2315 assert((qiov->size & (BDRV_SECTOR_SIZE - 1)) == 0);
2318 * In sync call context, when the vcpu is blocked, this throttling timer
2319 * will not fire; so the I/O throttling function has to be disabled here
2320 * if it has been enabled.
2322 if (bs->io_limits_enabled) {
2323 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2324 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2325 bdrv_io_limits_disable(bs);
2328 if (qemu_in_coroutine()) {
2329 /* Fast-path if already in coroutine context */
2330 bdrv_rw_co_entry(&rwco);
2332 co = qemu_coroutine_create(bdrv_rw_co_entry);
2333 qemu_coroutine_enter(co, &rwco);
2334 while (rwco.ret == NOT_DONE) {
2342 * Process a synchronous request using coroutines
2344 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2345 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2348 struct iovec iov = {
2349 .iov_base = (void *)buf,
2350 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2353 qemu_iovec_init_external(&qiov, &iov, 1);
2354 return bdrv_rwv_co(bs, sector_num, &qiov, is_write, flags);
2357 /* return < 0 if error. See bdrv_write() for the return codes */
2358 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2359 uint8_t *buf, int nb_sectors)
2361 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2364 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2365 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2366 uint8_t *buf, int nb_sectors)
2371 enabled = bs->io_limits_enabled;
2372 bs->io_limits_enabled = false;
2373 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2374 bs->io_limits_enabled = enabled;
2378 /* Return < 0 if error. Important errors are:
2379 -EIO generic I/O error (may happen for all errors)
2380 -ENOMEDIUM No media inserted.
2381 -EINVAL Invalid sector number or nb_sectors
2382 -EACCES Trying to write a read-only device
2384 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2385 const uint8_t *buf, int nb_sectors)
2387 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2390 int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov)
2392 return bdrv_rwv_co(bs, sector_num, qiov, true, 0);
2395 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2396 int nb_sectors, BdrvRequestFlags flags)
2398 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2399 BDRV_REQ_ZERO_WRITE | flags);
2403 * Completely zero out a block device with the help of bdrv_write_zeroes.
2404 * The operation is sped up by checking the block status and only writing
2405 * zeroes to the device if they currently do not return zeroes. Optional
2406 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2408 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2410 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2412 int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
2413 int64_t ret, nb_sectors, sector_num = 0;
2417 nb_sectors = target_size - sector_num;
2418 if (nb_sectors <= 0) {
2421 if (nb_sectors > INT_MAX) {
2422 nb_sectors = INT_MAX;
2424 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2425 if (ret & BDRV_BLOCK_ZERO) {
2429 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2431 error_report("error writing zeroes at sector %" PRId64 ": %s",
2432 sector_num, strerror(-ret));
2439 int bdrv_pread(BlockDriverState *bs, int64_t offset,
2440 void *buf, int count1)
2442 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2443 int len, nb_sectors, count;
2448 /* first read to align to sector start */
2449 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2452 sector_num = offset >> BDRV_SECTOR_BITS;
2454 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2456 memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
2464 /* read the sectors "in place" */
2465 nb_sectors = count >> BDRV_SECTOR_BITS;
2466 if (nb_sectors > 0) {
2467 if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
2469 sector_num += nb_sectors;
2470 len = nb_sectors << BDRV_SECTOR_BITS;
2475 /* add data from the last sector */
2477 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2479 memcpy(buf, tmp_buf, count);
2484 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2486 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2487 int len, nb_sectors, count;
2493 /* first write to align to sector start */
2494 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2497 sector_num = offset >> BDRV_SECTOR_BITS;
2499 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2501 qemu_iovec_to_buf(qiov, 0, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)),
2503 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2511 /* write the sectors "in place" */
2512 nb_sectors = count >> BDRV_SECTOR_BITS;
2513 if (nb_sectors > 0) {
2514 QEMUIOVector qiov_inplace;
2516 qemu_iovec_init(&qiov_inplace, qiov->niov);
2517 qemu_iovec_concat(&qiov_inplace, qiov, len,
2518 nb_sectors << BDRV_SECTOR_BITS);
2519 ret = bdrv_writev(bs, sector_num, &qiov_inplace);
2520 qemu_iovec_destroy(&qiov_inplace);
2525 sector_num += nb_sectors;
2526 len = nb_sectors << BDRV_SECTOR_BITS;
2530 /* add data from the last sector */
2532 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2534 qemu_iovec_to_buf(qiov, qiov->size - count, tmp_buf, count);
2535 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2541 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2542 const void *buf, int count1)
2545 struct iovec iov = {
2546 .iov_base = (void *) buf,
2550 qemu_iovec_init_external(&qiov, &iov, 1);
2551 return bdrv_pwritev(bs, offset, &qiov);
2555 * Writes to the file and ensures that no writes are reordered across this
2556 * request (acts as a barrier)
2558 * Returns 0 on success, -errno in error cases.
2560 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2561 const void *buf, int count)
2565 ret = bdrv_pwrite(bs, offset, buf, count);
2570 /* No flush needed for cache modes that already do it */
2571 if (bs->enable_write_cache) {
2578 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2579 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2581 /* Perform I/O through a temporary buffer so that users who scribble over
2582 * their read buffer while the operation is in progress do not end up
2583 * modifying the image file. This is critical for zero-copy guest I/O
2584 * where anything might happen inside guest memory.
2586 void *bounce_buffer;
2588 BlockDriver *drv = bs->drv;
2590 QEMUIOVector bounce_qiov;
2591 int64_t cluster_sector_num;
2592 int cluster_nb_sectors;
2596 /* Cover entire cluster so no additional backing file I/O is required when
2597 * allocating cluster in the image file.
2599 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2600 &cluster_sector_num, &cluster_nb_sectors);
2602 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2603 cluster_sector_num, cluster_nb_sectors);
2605 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2606 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2607 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2609 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2615 if (drv->bdrv_co_write_zeroes &&
2616 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2617 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2618 cluster_nb_sectors, 0);
2620 /* This does not change the data on the disk, it is not necessary
2621 * to flush even in cache=writethrough mode.
2623 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2628 /* It might be okay to ignore write errors for guest requests. If this
2629 * is a deliberate copy-on-read then we don't want to ignore the error.
2630 * Simply report it in all cases.
2635 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2636 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2637 nb_sectors * BDRV_SECTOR_SIZE);
2640 qemu_vfree(bounce_buffer);
2645 * Handle a read request in coroutine context
2647 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
2648 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2649 BdrvRequestFlags flags)
2651 BlockDriver *drv = bs->drv;
2652 BdrvTrackedRequest req;
2658 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2662 if (bs->copy_on_read) {
2663 flags |= BDRV_REQ_COPY_ON_READ;
2665 if (flags & BDRV_REQ_COPY_ON_READ) {
2666 bs->copy_on_read_in_flight++;
2669 if (bs->copy_on_read_in_flight) {
2670 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2673 /* throttling disk I/O */
2674 if (bs->io_limits_enabled) {
2675 bdrv_io_limits_intercept(bs, nb_sectors, false);
2678 tracked_request_begin(&req, bs, sector_num, nb_sectors, false);
2680 if (flags & BDRV_REQ_COPY_ON_READ) {
2683 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2688 if (!ret || pnum != nb_sectors) {
2689 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2694 if (!(bs->zero_beyond_eof && bs->growable)) {
2695 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2697 /* Read zeros after EOF of growable BDSes */
2698 int64_t len, total_sectors, max_nb_sectors;
2700 len = bdrv_getlength(bs);
2706 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
2707 max_nb_sectors = MAX(0, total_sectors - sector_num);
2708 if (max_nb_sectors > 0) {
2709 ret = drv->bdrv_co_readv(bs, sector_num,
2710 MIN(nb_sectors, max_nb_sectors), qiov);
2715 /* Reading beyond end of file is supposed to produce zeroes */
2716 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2717 uint64_t offset = MAX(0, total_sectors - sector_num);
2718 uint64_t bytes = (sector_num + nb_sectors - offset) *
2720 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
2725 tracked_request_end(&req);
2727 if (flags & BDRV_REQ_COPY_ON_READ) {
2728 bs->copy_on_read_in_flight--;
2734 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
2735 int nb_sectors, QEMUIOVector *qiov)
2737 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
2739 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
2742 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
2743 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2745 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
2747 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
2748 BDRV_REQ_COPY_ON_READ);
2751 /* if no limit is specified in the BlockLimits use a default
2752 * of 32768 512-byte sectors (16 MiB) per request.
2754 #define MAX_WRITE_ZEROES_DEFAULT 32768
2756 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
2757 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
2759 BlockDriver *drv = bs->drv;
2761 struct iovec iov = {0};
2764 int max_write_zeroes = bs->bl.max_write_zeroes ?
2765 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
2767 while (nb_sectors > 0 && !ret) {
2768 int num = nb_sectors;
2771 if (bs->bl.write_zeroes_alignment &&
2772 num >= bs->bl.write_zeroes_alignment &&
2773 sector_num % bs->bl.write_zeroes_alignment) {
2774 if (num > bs->bl.write_zeroes_alignment) {
2775 num = bs->bl.write_zeroes_alignment;
2777 num -= sector_num % bs->bl.write_zeroes_alignment;
2780 /* limit request size */
2781 if (num > max_write_zeroes) {
2782 num = max_write_zeroes;
2786 /* First try the efficient write zeroes operation */
2787 if (drv->bdrv_co_write_zeroes) {
2788 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
2791 if (ret == -ENOTSUP) {
2792 /* Fall back to bounce buffer if write zeroes is unsupported */
2793 iov.iov_len = num * BDRV_SECTOR_SIZE;
2794 if (iov.iov_base == NULL) {
2795 /* allocate bounce buffer only once and ensure that it
2796 * is big enough for this and all future requests.
2798 size_t bufsize = num <= nb_sectors ? num : max_write_zeroes;
2799 iov.iov_base = qemu_blockalign(bs, bufsize * BDRV_SECTOR_SIZE);
2800 memset(iov.iov_base, 0, bufsize * BDRV_SECTOR_SIZE);
2802 qemu_iovec_init_external(&qiov, &iov, 1);
2804 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
2811 qemu_vfree(iov.iov_base);
2816 * Handle a write request in coroutine context
2818 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
2819 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2820 BdrvRequestFlags flags)
2822 BlockDriver *drv = bs->drv;
2823 BdrvTrackedRequest req;
2829 if (bs->read_only) {
2832 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2836 if (bs->copy_on_read_in_flight) {
2837 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2840 /* throttling disk I/O */
2841 if (bs->io_limits_enabled) {
2842 bdrv_io_limits_intercept(bs, nb_sectors, true);
2845 tracked_request_begin(&req, bs, sector_num, nb_sectors, true);
2847 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, &req);
2850 /* Do nothing, write notifier decided to fail this request */
2851 } else if (flags & BDRV_REQ_ZERO_WRITE) {
2852 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
2854 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
2857 if (ret == 0 && !bs->enable_write_cache) {
2858 ret = bdrv_co_flush(bs);
2861 if (bs->dirty_bitmap) {
2862 bdrv_set_dirty(bs, sector_num, nb_sectors);
2865 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
2866 bs->wr_highest_sector = sector_num + nb_sectors - 1;
2868 if (bs->growable && ret >= 0) {
2869 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
2872 tracked_request_end(&req);
2877 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
2878 int nb_sectors, QEMUIOVector *qiov)
2880 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
2882 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
2885 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
2886 int64_t sector_num, int nb_sectors,
2887 BdrvRequestFlags flags)
2889 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2891 if (!(bs->open_flags & BDRV_O_UNMAP)) {
2892 flags &= ~BDRV_REQ_MAY_UNMAP;
2895 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
2896 BDRV_REQ_ZERO_WRITE | flags);
2900 * Truncate file to 'offset' bytes (needed only for file protocols)
2902 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
2904 BlockDriver *drv = bs->drv;
2908 if (!drv->bdrv_truncate)
2912 if (bdrv_in_use(bs))
2914 ret = drv->bdrv_truncate(bs, offset);
2916 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
2917 bdrv_dev_resize_cb(bs);
2923 * Length of a allocated file in bytes. Sparse files are counted by actual
2924 * allocated space. Return < 0 if error or unknown.
2926 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
2928 BlockDriver *drv = bs->drv;
2932 if (drv->bdrv_get_allocated_file_size) {
2933 return drv->bdrv_get_allocated_file_size(bs);
2936 return bdrv_get_allocated_file_size(bs->file);
2942 * Length of a file in bytes. Return < 0 if error or unknown.
2944 int64_t bdrv_getlength(BlockDriverState *bs)
2946 BlockDriver *drv = bs->drv;
2950 if (drv->has_variable_length) {
2951 int ret = refresh_total_sectors(bs, bs->total_sectors);
2956 return bs->total_sectors * BDRV_SECTOR_SIZE;
2959 /* return 0 as number of sectors if no device present or error */
2960 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
2963 length = bdrv_getlength(bs);
2967 length = length >> BDRV_SECTOR_BITS;
2968 *nb_sectors_ptr = length;
2971 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
2972 BlockdevOnError on_write_error)
2974 bs->on_read_error = on_read_error;
2975 bs->on_write_error = on_write_error;
2978 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
2980 return is_read ? bs->on_read_error : bs->on_write_error;
2983 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
2985 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
2988 case BLOCKDEV_ON_ERROR_ENOSPC:
2989 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
2990 case BLOCKDEV_ON_ERROR_STOP:
2991 return BDRV_ACTION_STOP;
2992 case BLOCKDEV_ON_ERROR_REPORT:
2993 return BDRV_ACTION_REPORT;
2994 case BLOCKDEV_ON_ERROR_IGNORE:
2995 return BDRV_ACTION_IGNORE;
3001 /* This is done by device models because, while the block layer knows
3002 * about the error, it does not know whether an operation comes from
3003 * the device or the block layer (from a job, for example).
3005 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3006 bool is_read, int error)
3009 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3010 if (action == BDRV_ACTION_STOP) {
3011 vm_stop(RUN_STATE_IO_ERROR);
3012 bdrv_iostatus_set_err(bs, error);
3016 int bdrv_is_read_only(BlockDriverState *bs)
3018 return bs->read_only;
3021 int bdrv_is_sg(BlockDriverState *bs)
3026 int bdrv_enable_write_cache(BlockDriverState *bs)
3028 return bs->enable_write_cache;
3031 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3033 bs->enable_write_cache = wce;
3035 /* so a reopen() will preserve wce */
3037 bs->open_flags |= BDRV_O_CACHE_WB;
3039 bs->open_flags &= ~BDRV_O_CACHE_WB;
3043 int bdrv_is_encrypted(BlockDriverState *bs)
3045 if (bs->backing_hd && bs->backing_hd->encrypted)
3047 return bs->encrypted;
3050 int bdrv_key_required(BlockDriverState *bs)
3052 BlockDriverState *backing_hd = bs->backing_hd;
3054 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3056 return (bs->encrypted && !bs->valid_key);
3059 int bdrv_set_key(BlockDriverState *bs, const char *key)
3062 if (bs->backing_hd && bs->backing_hd->encrypted) {
3063 ret = bdrv_set_key(bs->backing_hd, key);
3069 if (!bs->encrypted) {
3071 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3074 ret = bs->drv->bdrv_set_key(bs, key);
3077 } else if (!bs->valid_key) {
3079 /* call the change callback now, we skipped it on open */
3080 bdrv_dev_change_media_cb(bs, true);
3085 const char *bdrv_get_format_name(BlockDriverState *bs)
3087 return bs->drv ? bs->drv->format_name : NULL;
3090 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3095 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3096 it(opaque, drv->format_name);
3100 BlockDriverState *bdrv_find(const char *name)
3102 BlockDriverState *bs;
3104 QTAILQ_FOREACH(bs, &bdrv_states, list) {
3105 if (!strcmp(name, bs->device_name)) {
3112 BlockDriverState *bdrv_next(BlockDriverState *bs)
3115 return QTAILQ_FIRST(&bdrv_states);
3117 return QTAILQ_NEXT(bs, list);
3120 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3122 BlockDriverState *bs;
3124 QTAILQ_FOREACH(bs, &bdrv_states, list) {
3129 const char *bdrv_get_device_name(BlockDriverState *bs)
3131 return bs->device_name;
3134 int bdrv_get_flags(BlockDriverState *bs)
3136 return bs->open_flags;
3139 int bdrv_flush_all(void)
3141 BlockDriverState *bs;
3144 QTAILQ_FOREACH(bs, &bdrv_states, list) {
3145 int ret = bdrv_flush(bs);
3146 if (ret < 0 && !result) {
3154 int bdrv_has_zero_init_1(BlockDriverState *bs)
3159 int bdrv_has_zero_init(BlockDriverState *bs)
3163 /* If BS is a copy on write image, it is initialized to
3164 the contents of the base image, which may not be zeroes. */
3165 if (bs->backing_hd) {
3168 if (bs->drv->bdrv_has_zero_init) {
3169 return bs->drv->bdrv_has_zero_init(bs);
3176 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3178 BlockDriverInfo bdi;
3180 if (bs->backing_hd) {
3184 if (bdrv_get_info(bs, &bdi) == 0) {
3185 return bdi.unallocated_blocks_are_zero;
3191 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3193 BlockDriverInfo bdi;
3195 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3199 if (bdrv_get_info(bs, &bdi) == 0) {
3200 return bdi.can_write_zeroes_with_unmap;
3206 typedef struct BdrvCoGetBlockStatusData {
3207 BlockDriverState *bs;
3208 BlockDriverState *base;
3214 } BdrvCoGetBlockStatusData;
3217 * Returns true iff the specified sector is present in the disk image. Drivers
3218 * not implementing the functionality are assumed to not support backing files,
3219 * hence all their sectors are reported as allocated.
3221 * If 'sector_num' is beyond the end of the disk image the return value is 0
3222 * and 'pnum' is set to 0.
3224 * 'pnum' is set to the number of sectors (including and immediately following
3225 * the specified sector) that are known to be in the same
3226 * allocated/unallocated state.
3228 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3229 * beyond the end of the disk image it will be clamped.
3231 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3233 int nb_sectors, int *pnum)
3239 length = bdrv_getlength(bs);
3244 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3249 n = bs->total_sectors - sector_num;
3250 if (n < nb_sectors) {
3254 if (!bs->drv->bdrv_co_get_block_status) {
3256 ret = BDRV_BLOCK_DATA;
3257 if (bs->drv->protocol_name) {
3258 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3263 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3269 if (ret & BDRV_BLOCK_RAW) {
3270 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3271 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3275 if (!(ret & BDRV_BLOCK_DATA)) {
3276 if (bdrv_has_zero_init(bs)) {
3277 ret |= BDRV_BLOCK_ZERO;
3278 } else if (bs->backing_hd) {
3279 BlockDriverState *bs2 = bs->backing_hd;
3280 int64_t length2 = bdrv_getlength(bs2);
3281 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3282 ret |= BDRV_BLOCK_ZERO;
3288 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3289 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3290 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3293 /* Ignore errors. This is just providing extra information, it
3294 * is useful but not necessary.
3296 ret |= (ret2 & BDRV_BLOCK_ZERO);
3303 /* Coroutine wrapper for bdrv_get_block_status() */
3304 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3306 BdrvCoGetBlockStatusData *data = opaque;
3307 BlockDriverState *bs = data->bs;
3309 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3315 * Synchronous wrapper around bdrv_co_get_block_status().
3317 * See bdrv_co_get_block_status() for details.
3319 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3320 int nb_sectors, int *pnum)
3323 BdrvCoGetBlockStatusData data = {
3325 .sector_num = sector_num,
3326 .nb_sectors = nb_sectors,
3331 if (qemu_in_coroutine()) {
3332 /* Fast-path if already in coroutine context */
3333 bdrv_get_block_status_co_entry(&data);
3335 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3336 qemu_coroutine_enter(co, &data);
3337 while (!data.done) {
3344 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3345 int nb_sectors, int *pnum)
3347 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3352 (ret & BDRV_BLOCK_DATA) ||
3353 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3357 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3359 * Return true if the given sector is allocated in any image between
3360 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3361 * sector is allocated in any image of the chain. Return false otherwise.
3363 * 'pnum' is set to the number of sectors (including and immediately following
3364 * the specified sector) that are known to be in the same
3365 * allocated/unallocated state.
3368 int bdrv_is_allocated_above(BlockDriverState *top,
3369 BlockDriverState *base,
3371 int nb_sectors, int *pnum)
3373 BlockDriverState *intermediate;
3374 int ret, n = nb_sectors;
3377 while (intermediate && intermediate != base) {
3379 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3389 * [sector_num, nb_sectors] is unallocated on top but intermediate
3392 * [sector_num+x, nr_sectors] allocated.
3394 if (n > pnum_inter &&
3395 (intermediate == top ||
3396 sector_num + pnum_inter < intermediate->total_sectors)) {
3400 intermediate = intermediate->backing_hd;
3407 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3409 if (bs->backing_hd && bs->backing_hd->encrypted)
3410 return bs->backing_file;
3411 else if (bs->encrypted)
3412 return bs->filename;
3417 void bdrv_get_backing_filename(BlockDriverState *bs,
3418 char *filename, int filename_size)
3420 pstrcpy(filename, filename_size, bs->backing_file);
3423 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3424 const uint8_t *buf, int nb_sectors)
3426 BlockDriver *drv = bs->drv;
3429 if (!drv->bdrv_write_compressed)
3431 if (bdrv_check_request(bs, sector_num, nb_sectors))
3434 assert(!bs->dirty_bitmap);
3436 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3439 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3441 BlockDriver *drv = bs->drv;
3444 if (!drv->bdrv_get_info)
3446 memset(bdi, 0, sizeof(*bdi));
3447 return drv->bdrv_get_info(bs, bdi);
3450 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
3452 BlockDriver *drv = bs->drv;
3453 if (drv && drv->bdrv_get_specific_info) {
3454 return drv->bdrv_get_specific_info(bs);
3459 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3460 int64_t pos, int size)
3463 struct iovec iov = {
3464 .iov_base = (void *) buf,
3468 qemu_iovec_init_external(&qiov, &iov, 1);
3469 return bdrv_writev_vmstate(bs, &qiov, pos);
3472 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3474 BlockDriver *drv = bs->drv;
3478 } else if (drv->bdrv_save_vmstate) {
3479 return drv->bdrv_save_vmstate(bs, qiov, pos);
3480 } else if (bs->file) {
3481 return bdrv_writev_vmstate(bs->file, qiov, pos);
3487 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3488 int64_t pos, int size)
3490 BlockDriver *drv = bs->drv;
3493 if (drv->bdrv_load_vmstate)
3494 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3496 return bdrv_load_vmstate(bs->file, buf, pos, size);
3500 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
3502 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
3506 bs->drv->bdrv_debug_event(bs, event);
3509 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
3512 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
3516 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
3517 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
3523 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
3525 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
3529 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
3530 return bs->drv->bdrv_debug_resume(bs, tag);
3536 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
3538 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
3542 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
3543 return bs->drv->bdrv_debug_is_suspended(bs, tag);
3549 int bdrv_is_snapshot(BlockDriverState *bs)
3551 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
3554 /* backing_file can either be relative, or absolute, or a protocol. If it is
3555 * relative, it must be relative to the chain. So, passing in bs->filename
3556 * from a BDS as backing_file should not be done, as that may be relative to
3557 * the CWD rather than the chain. */
3558 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
3559 const char *backing_file)
3561 char *filename_full = NULL;
3562 char *backing_file_full = NULL;
3563 char *filename_tmp = NULL;
3564 int is_protocol = 0;
3565 BlockDriverState *curr_bs = NULL;
3566 BlockDriverState *retval = NULL;
3568 if (!bs || !bs->drv || !backing_file) {
3572 filename_full = g_malloc(PATH_MAX);
3573 backing_file_full = g_malloc(PATH_MAX);
3574 filename_tmp = g_malloc(PATH_MAX);
3576 is_protocol = path_has_protocol(backing_file);
3578 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
3580 /* If either of the filename paths is actually a protocol, then
3581 * compare unmodified paths; otherwise make paths relative */
3582 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
3583 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
3584 retval = curr_bs->backing_hd;
3588 /* If not an absolute filename path, make it relative to the current
3589 * image's filename path */
3590 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3593 /* We are going to compare absolute pathnames */
3594 if (!realpath(filename_tmp, filename_full)) {
3598 /* We need to make sure the backing filename we are comparing against
3599 * is relative to the current image filename (or absolute) */
3600 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3601 curr_bs->backing_file);
3603 if (!realpath(filename_tmp, backing_file_full)) {
3607 if (strcmp(backing_file_full, filename_full) == 0) {
3608 retval = curr_bs->backing_hd;
3614 g_free(filename_full);
3615 g_free(backing_file_full);
3616 g_free(filename_tmp);
3620 int bdrv_get_backing_file_depth(BlockDriverState *bs)
3626 if (!bs->backing_hd) {
3630 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
3633 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
3635 BlockDriverState *curr_bs = NULL;
3643 while (curr_bs->backing_hd) {
3644 curr_bs = curr_bs->backing_hd;
3649 /**************************************************************/
3652 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
3653 QEMUIOVector *qiov, int nb_sectors,
3654 BlockDriverCompletionFunc *cb, void *opaque)
3656 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
3658 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3662 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
3663 QEMUIOVector *qiov, int nb_sectors,
3664 BlockDriverCompletionFunc *cb, void *opaque)
3666 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
3668 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3673 typedef struct MultiwriteCB {
3678 BlockDriverCompletionFunc *cb;
3680 QEMUIOVector *free_qiov;
3684 static void multiwrite_user_cb(MultiwriteCB *mcb)
3688 for (i = 0; i < mcb->num_callbacks; i++) {
3689 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
3690 if (mcb->callbacks[i].free_qiov) {
3691 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
3693 g_free(mcb->callbacks[i].free_qiov);
3697 static void multiwrite_cb(void *opaque, int ret)
3699 MultiwriteCB *mcb = opaque;
3701 trace_multiwrite_cb(mcb, ret);
3703 if (ret < 0 && !mcb->error) {
3707 mcb->num_requests--;
3708 if (mcb->num_requests == 0) {
3709 multiwrite_user_cb(mcb);
3714 static int multiwrite_req_compare(const void *a, const void *b)
3716 const BlockRequest *req1 = a, *req2 = b;
3719 * Note that we can't simply subtract req2->sector from req1->sector
3720 * here as that could overflow the return value.
3722 if (req1->sector > req2->sector) {
3724 } else if (req1->sector < req2->sector) {
3732 * Takes a bunch of requests and tries to merge them. Returns the number of
3733 * requests that remain after merging.
3735 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
3736 int num_reqs, MultiwriteCB *mcb)
3740 // Sort requests by start sector
3741 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
3743 // Check if adjacent requests touch the same clusters. If so, combine them,
3744 // filling up gaps with zero sectors.
3746 for (i = 1; i < num_reqs; i++) {
3748 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
3750 // Handle exactly sequential writes and overlapping writes.
3751 if (reqs[i].sector <= oldreq_last) {
3755 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
3761 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
3762 qemu_iovec_init(qiov,
3763 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
3765 // Add the first request to the merged one. If the requests are
3766 // overlapping, drop the last sectors of the first request.
3767 size = (reqs[i].sector - reqs[outidx].sector) << 9;
3768 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
3770 // We should need to add any zeros between the two requests
3771 assert (reqs[i].sector <= oldreq_last);
3773 // Add the second request
3774 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
3776 reqs[outidx].nb_sectors = qiov->size >> 9;
3777 reqs[outidx].qiov = qiov;
3779 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
3782 reqs[outidx].sector = reqs[i].sector;
3783 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
3784 reqs[outidx].qiov = reqs[i].qiov;
3792 * Submit multiple AIO write requests at once.
3794 * On success, the function returns 0 and all requests in the reqs array have
3795 * been submitted. In error case this function returns -1, and any of the
3796 * requests may or may not be submitted yet. In particular, this means that the
3797 * callback will be called for some of the requests, for others it won't. The
3798 * caller must check the error field of the BlockRequest to wait for the right
3799 * callbacks (if error != 0, no callback will be called).
3801 * The implementation may modify the contents of the reqs array, e.g. to merge
3802 * requests. However, the fields opaque and error are left unmodified as they
3803 * are used to signal failure for a single request to the caller.
3805 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
3810 /* don't submit writes if we don't have a medium */
3811 if (bs->drv == NULL) {
3812 for (i = 0; i < num_reqs; i++) {
3813 reqs[i].error = -ENOMEDIUM;
3818 if (num_reqs == 0) {
3822 // Create MultiwriteCB structure
3823 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
3824 mcb->num_requests = 0;
3825 mcb->num_callbacks = num_reqs;
3827 for (i = 0; i < num_reqs; i++) {
3828 mcb->callbacks[i].cb = reqs[i].cb;
3829 mcb->callbacks[i].opaque = reqs[i].opaque;
3832 // Check for mergable requests
3833 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
3835 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
3837 /* Run the aio requests. */
3838 mcb->num_requests = num_reqs;
3839 for (i = 0; i < num_reqs; i++) {
3840 bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
3841 reqs[i].nb_sectors, multiwrite_cb, mcb);
3847 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
3849 acb->aiocb_info->cancel(acb);
3852 /**************************************************************/
3853 /* async block device emulation */
3855 typedef struct BlockDriverAIOCBSync {
3856 BlockDriverAIOCB common;
3859 /* vector translation state */
3863 } BlockDriverAIOCBSync;
3865 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
3867 BlockDriverAIOCBSync *acb =
3868 container_of(blockacb, BlockDriverAIOCBSync, common);
3869 qemu_bh_delete(acb->bh);
3871 qemu_aio_release(acb);
3874 static const AIOCBInfo bdrv_em_aiocb_info = {
3875 .aiocb_size = sizeof(BlockDriverAIOCBSync),
3876 .cancel = bdrv_aio_cancel_em,
3879 static void bdrv_aio_bh_cb(void *opaque)
3881 BlockDriverAIOCBSync *acb = opaque;
3884 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
3885 qemu_vfree(acb->bounce);
3886 acb->common.cb(acb->common.opaque, acb->ret);
3887 qemu_bh_delete(acb->bh);
3889 qemu_aio_release(acb);
3892 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
3896 BlockDriverCompletionFunc *cb,
3901 BlockDriverAIOCBSync *acb;
3903 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
3904 acb->is_write = is_write;
3906 acb->bounce = qemu_blockalign(bs, qiov->size);
3907 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
3910 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
3911 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
3913 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
3916 qemu_bh_schedule(acb->bh);
3918 return &acb->common;
3921 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
3922 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3923 BlockDriverCompletionFunc *cb, void *opaque)
3925 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
3928 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
3929 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3930 BlockDriverCompletionFunc *cb, void *opaque)
3932 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
3936 typedef struct BlockDriverAIOCBCoroutine {
3937 BlockDriverAIOCB common;
3942 } BlockDriverAIOCBCoroutine;
3944 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
3946 BlockDriverAIOCBCoroutine *acb =
3947 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
3956 static const AIOCBInfo bdrv_em_co_aiocb_info = {
3957 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
3958 .cancel = bdrv_aio_co_cancel_em,
3961 static void bdrv_co_em_bh(void *opaque)
3963 BlockDriverAIOCBCoroutine *acb = opaque;
3965 acb->common.cb(acb->common.opaque, acb->req.error);
3971 qemu_bh_delete(acb->bh);
3972 qemu_aio_release(acb);
3975 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3976 static void coroutine_fn bdrv_co_do_rw(void *opaque)
3978 BlockDriverAIOCBCoroutine *acb = opaque;
3979 BlockDriverState *bs = acb->common.bs;
3981 if (!acb->is_write) {
3982 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
3983 acb->req.nb_sectors, acb->req.qiov, 0);
3985 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
3986 acb->req.nb_sectors, acb->req.qiov, 0);
3989 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3990 qemu_bh_schedule(acb->bh);
3993 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
3997 BlockDriverCompletionFunc *cb,
4002 BlockDriverAIOCBCoroutine *acb;
4004 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4005 acb->req.sector = sector_num;
4006 acb->req.nb_sectors = nb_sectors;
4007 acb->req.qiov = qiov;
4008 acb->is_write = is_write;
4011 co = qemu_coroutine_create(bdrv_co_do_rw);
4012 qemu_coroutine_enter(co, acb);
4014 return &acb->common;
4017 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4019 BlockDriverAIOCBCoroutine *acb = opaque;
4020 BlockDriverState *bs = acb->common.bs;
4022 acb->req.error = bdrv_co_flush(bs);
4023 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4024 qemu_bh_schedule(acb->bh);
4027 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4028 BlockDriverCompletionFunc *cb, void *opaque)
4030 trace_bdrv_aio_flush(bs, opaque);
4033 BlockDriverAIOCBCoroutine *acb;
4035 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4038 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4039 qemu_coroutine_enter(co, acb);
4041 return &acb->common;
4044 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4046 BlockDriverAIOCBCoroutine *acb = opaque;
4047 BlockDriverState *bs = acb->common.bs;
4049 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4050 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4051 qemu_bh_schedule(acb->bh);
4054 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4055 int64_t sector_num, int nb_sectors,
4056 BlockDriverCompletionFunc *cb, void *opaque)
4059 BlockDriverAIOCBCoroutine *acb;
4061 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4063 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4064 acb->req.sector = sector_num;
4065 acb->req.nb_sectors = nb_sectors;
4067 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4068 qemu_coroutine_enter(co, acb);
4070 return &acb->common;
4073 void bdrv_init(void)
4075 module_call_init(MODULE_INIT_BLOCK);
4078 void bdrv_init_with_whitelist(void)
4080 use_bdrv_whitelist = 1;
4084 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4085 BlockDriverCompletionFunc *cb, void *opaque)
4087 BlockDriverAIOCB *acb;
4089 acb = g_slice_alloc(aiocb_info->aiocb_size);
4090 acb->aiocb_info = aiocb_info;
4093 acb->opaque = opaque;
4097 void qemu_aio_release(void *p)
4099 BlockDriverAIOCB *acb = p;
4100 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4103 /**************************************************************/
4104 /* Coroutine block device emulation */
4106 typedef struct CoroutineIOCompletion {
4107 Coroutine *coroutine;
4109 } CoroutineIOCompletion;
4111 static void bdrv_co_io_em_complete(void *opaque, int ret)
4113 CoroutineIOCompletion *co = opaque;
4116 qemu_coroutine_enter(co->coroutine, NULL);
4119 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4120 int nb_sectors, QEMUIOVector *iov,
4123 CoroutineIOCompletion co = {
4124 .coroutine = qemu_coroutine_self(),
4126 BlockDriverAIOCB *acb;
4129 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4130 bdrv_co_io_em_complete, &co);
4132 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4133 bdrv_co_io_em_complete, &co);
4136 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4140 qemu_coroutine_yield();
4145 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4146 int64_t sector_num, int nb_sectors,
4149 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4152 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4153 int64_t sector_num, int nb_sectors,
4156 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4159 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4161 RwCo *rwco = opaque;
4163 rwco->ret = bdrv_co_flush(rwco->bs);
4166 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4170 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4174 /* Write back cached data to the OS even with cache=unsafe */
4175 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4176 if (bs->drv->bdrv_co_flush_to_os) {
4177 ret = bs->drv->bdrv_co_flush_to_os(bs);
4183 /* But don't actually force it to the disk with cache=unsafe */
4184 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4188 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4189 if (bs->drv->bdrv_co_flush_to_disk) {
4190 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4191 } else if (bs->drv->bdrv_aio_flush) {
4192 BlockDriverAIOCB *acb;
4193 CoroutineIOCompletion co = {
4194 .coroutine = qemu_coroutine_self(),
4197 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4201 qemu_coroutine_yield();
4206 * Some block drivers always operate in either writethrough or unsafe
4207 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4208 * know how the server works (because the behaviour is hardcoded or
4209 * depends on server-side configuration), so we can't ensure that
4210 * everything is safe on disk. Returning an error doesn't work because
4211 * that would break guests even if the server operates in writethrough
4214 * Let's hope the user knows what he's doing.
4222 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4223 * in the case of cache=unsafe, so there are no useless flushes.
4226 return bdrv_co_flush(bs->file);
4229 void bdrv_invalidate_cache(BlockDriverState *bs)
4231 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4232 bs->drv->bdrv_invalidate_cache(bs);
4236 void bdrv_invalidate_cache_all(void)
4238 BlockDriverState *bs;
4240 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4241 bdrv_invalidate_cache(bs);
4245 void bdrv_clear_incoming_migration_all(void)
4247 BlockDriverState *bs;
4249 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4250 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4254 int bdrv_flush(BlockDriverState *bs)
4262 if (qemu_in_coroutine()) {
4263 /* Fast-path if already in coroutine context */
4264 bdrv_flush_co_entry(&rwco);
4266 co = qemu_coroutine_create(bdrv_flush_co_entry);
4267 qemu_coroutine_enter(co, &rwco);
4268 while (rwco.ret == NOT_DONE) {
4276 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4278 RwCo *rwco = opaque;
4280 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4283 /* if no limit is specified in the BlockLimits use a default
4284 * of 32768 512-byte sectors (16 MiB) per request.
4286 #define MAX_DISCARD_DEFAULT 32768
4288 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4293 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4295 } else if (bs->read_only) {
4299 if (bs->dirty_bitmap) {
4300 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4303 /* Do nothing if disabled. */
4304 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4308 if (bs->drv->bdrv_co_discard) {
4309 int max_discard = bs->bl.max_discard ?
4310 bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4312 while (nb_sectors > 0) {
4314 int num = nb_sectors;
4317 if (bs->bl.discard_alignment &&
4318 num >= bs->bl.discard_alignment &&
4319 sector_num % bs->bl.discard_alignment) {
4320 if (num > bs->bl.discard_alignment) {
4321 num = bs->bl.discard_alignment;
4323 num -= sector_num % bs->bl.discard_alignment;
4326 /* limit request size */
4327 if (num > max_discard) {
4331 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4340 } else if (bs->drv->bdrv_aio_discard) {
4341 BlockDriverAIOCB *acb;
4342 CoroutineIOCompletion co = {
4343 .coroutine = qemu_coroutine_self(),
4346 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4347 bdrv_co_io_em_complete, &co);
4351 qemu_coroutine_yield();
4359 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4364 .sector_num = sector_num,
4365 .nb_sectors = nb_sectors,
4369 if (qemu_in_coroutine()) {
4370 /* Fast-path if already in coroutine context */
4371 bdrv_discard_co_entry(&rwco);
4373 co = qemu_coroutine_create(bdrv_discard_co_entry);
4374 qemu_coroutine_enter(co, &rwco);
4375 while (rwco.ret == NOT_DONE) {
4383 /**************************************************************/
4384 /* removable device support */
4387 * Return TRUE if the media is present
4389 int bdrv_is_inserted(BlockDriverState *bs)
4391 BlockDriver *drv = bs->drv;
4395 if (!drv->bdrv_is_inserted)
4397 return drv->bdrv_is_inserted(bs);
4401 * Return whether the media changed since the last call to this
4402 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4404 int bdrv_media_changed(BlockDriverState *bs)
4406 BlockDriver *drv = bs->drv;
4408 if (drv && drv->bdrv_media_changed) {
4409 return drv->bdrv_media_changed(bs);
4415 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4417 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4419 BlockDriver *drv = bs->drv;
4421 if (drv && drv->bdrv_eject) {
4422 drv->bdrv_eject(bs, eject_flag);
4425 if (bs->device_name[0] != '\0') {
4426 bdrv_emit_qmp_eject_event(bs, eject_flag);
4431 * Lock or unlock the media (if it is locked, the user won't be able
4432 * to eject it manually).
4434 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4436 BlockDriver *drv = bs->drv;
4438 trace_bdrv_lock_medium(bs, locked);
4440 if (drv && drv->bdrv_lock_medium) {
4441 drv->bdrv_lock_medium(bs, locked);
4445 /* needed for generic scsi interface */
4447 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4449 BlockDriver *drv = bs->drv;
4451 if (drv && drv->bdrv_ioctl)
4452 return drv->bdrv_ioctl(bs, req, buf);
4456 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4457 unsigned long int req, void *buf,
4458 BlockDriverCompletionFunc *cb, void *opaque)
4460 BlockDriver *drv = bs->drv;
4462 if (drv && drv->bdrv_aio_ioctl)
4463 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4467 void bdrv_set_buffer_alignment(BlockDriverState *bs, int align)
4469 bs->buffer_alignment = align;
4472 void *qemu_blockalign(BlockDriverState *bs, size_t size)
4474 return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size);
4478 * Check if all memory in this vector is sector aligned.
4480 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
4484 for (i = 0; i < qiov->niov; i++) {
4485 if ((uintptr_t) qiov->iov[i].iov_base % bs->buffer_alignment) {
4493 void bdrv_set_dirty_tracking(BlockDriverState *bs, int granularity)
4495 int64_t bitmap_size;
4497 assert((granularity & (granularity - 1)) == 0);
4500 granularity >>= BDRV_SECTOR_BITS;
4501 assert(!bs->dirty_bitmap);
4502 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
4503 bs->dirty_bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
4505 if (bs->dirty_bitmap) {
4506 hbitmap_free(bs->dirty_bitmap);
4507 bs->dirty_bitmap = NULL;
4512 int bdrv_get_dirty(BlockDriverState *bs, int64_t sector)
4514 if (bs->dirty_bitmap) {
4515 return hbitmap_get(bs->dirty_bitmap, sector);
4521 void bdrv_dirty_iter_init(BlockDriverState *bs, HBitmapIter *hbi)
4523 hbitmap_iter_init(hbi, bs->dirty_bitmap, 0);
4526 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
4529 hbitmap_set(bs->dirty_bitmap, cur_sector, nr_sectors);
4532 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector,
4535 hbitmap_reset(bs->dirty_bitmap, cur_sector, nr_sectors);
4538 int64_t bdrv_get_dirty_count(BlockDriverState *bs)
4540 if (bs->dirty_bitmap) {
4541 return hbitmap_count(bs->dirty_bitmap);
4547 /* Get a reference to bs */
4548 void bdrv_ref(BlockDriverState *bs)
4553 /* Release a previously grabbed reference to bs.
4554 * If after releasing, reference count is zero, the BlockDriverState is
4556 void bdrv_unref(BlockDriverState *bs)
4558 assert(bs->refcnt > 0);
4559 if (--bs->refcnt == 0) {
4564 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
4566 assert(bs->in_use != in_use);
4567 bs->in_use = in_use;
4570 int bdrv_in_use(BlockDriverState *bs)
4575 void bdrv_iostatus_enable(BlockDriverState *bs)
4577 bs->iostatus_enabled = true;
4578 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4581 /* The I/O status is only enabled if the drive explicitly
4582 * enables it _and_ the VM is configured to stop on errors */
4583 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
4585 return (bs->iostatus_enabled &&
4586 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
4587 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
4588 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
4591 void bdrv_iostatus_disable(BlockDriverState *bs)
4593 bs->iostatus_enabled = false;
4596 void bdrv_iostatus_reset(BlockDriverState *bs)
4598 if (bdrv_iostatus_is_enabled(bs)) {
4599 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4601 block_job_iostatus_reset(bs->job);
4606 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
4608 assert(bdrv_iostatus_is_enabled(bs));
4609 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
4610 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
4611 BLOCK_DEVICE_IO_STATUS_FAILED;
4616 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
4617 enum BlockAcctType type)
4619 assert(type < BDRV_MAX_IOTYPE);
4621 cookie->bytes = bytes;
4622 cookie->start_time_ns = get_clock();
4623 cookie->type = type;
4627 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
4629 assert(cookie->type < BDRV_MAX_IOTYPE);
4631 bs->nr_bytes[cookie->type] += cookie->bytes;
4632 bs->nr_ops[cookie->type]++;
4633 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
4636 void bdrv_img_create(const char *filename, const char *fmt,
4637 const char *base_filename, const char *base_fmt,
4638 char *options, uint64_t img_size, int flags,
4639 Error **errp, bool quiet)
4641 QEMUOptionParameter *param = NULL, *create_options = NULL;
4642 QEMUOptionParameter *backing_fmt, *backing_file, *size;
4643 BlockDriverState *bs = NULL;
4644 BlockDriver *drv, *proto_drv;
4645 BlockDriver *backing_drv = NULL;
4646 Error *local_err = NULL;
4649 /* Find driver and parse its options */
4650 drv = bdrv_find_format(fmt);
4652 error_setg(errp, "Unknown file format '%s'", fmt);
4656 proto_drv = bdrv_find_protocol(filename, true);
4658 error_setg(errp, "Unknown protocol '%s'", filename);
4662 create_options = append_option_parameters(create_options,
4663 drv->create_options);
4664 create_options = append_option_parameters(create_options,
4665 proto_drv->create_options);
4667 /* Create parameter list with default values */
4668 param = parse_option_parameters("", create_options, param);
4670 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
4672 /* Parse -o options */
4674 param = parse_option_parameters(options, create_options, param);
4675 if (param == NULL) {
4676 error_setg(errp, "Invalid options for file format '%s'.", fmt);
4681 if (base_filename) {
4682 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
4684 error_setg(errp, "Backing file not supported for file format '%s'",
4691 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
4692 error_setg(errp, "Backing file format not supported for file "
4693 "format '%s'", fmt);
4698 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
4699 if (backing_file && backing_file->value.s) {
4700 if (!strcmp(filename, backing_file->value.s)) {
4701 error_setg(errp, "Error: Trying to create an image with the "
4702 "same filename as the backing file");
4707 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
4708 if (backing_fmt && backing_fmt->value.s) {
4709 backing_drv = bdrv_find_format(backing_fmt->value.s);
4711 error_setg(errp, "Unknown backing file format '%s'",
4712 backing_fmt->value.s);
4717 // The size for the image must always be specified, with one exception:
4718 // If we are using a backing file, we can obtain the size from there
4719 size = get_option_parameter(param, BLOCK_OPT_SIZE);
4720 if (size && size->value.n == -1) {
4721 if (backing_file && backing_file->value.s) {
4726 /* backing files always opened read-only */
4728 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
4732 ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
4733 backing_drv, &local_err);
4735 error_setg_errno(errp, -ret, "Could not open '%s': %s",
4736 backing_file->value.s,
4737 error_get_pretty(local_err));
4738 error_free(local_err);
4742 bdrv_get_geometry(bs, &size);
4745 snprintf(buf, sizeof(buf), "%" PRId64, size);
4746 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
4748 error_setg(errp, "Image creation needs a size parameter");
4754 printf("Formatting '%s', fmt=%s ", filename, fmt);
4755 print_option_parameters(param);
4758 ret = bdrv_create(drv, filename, param, &local_err);
4759 if (ret == -EFBIG) {
4760 /* This is generally a better message than whatever the driver would
4761 * deliver (especially because of the cluster_size_hint), since that
4762 * is most probably not much different from "image too large". */
4763 const char *cluster_size_hint = "";
4764 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
4765 cluster_size_hint = " (try using a larger cluster size)";
4767 error_setg(errp, "The image size is too large for file format '%s'"
4768 "%s", fmt, cluster_size_hint);
4769 error_free(local_err);
4774 free_option_parameters(create_options);
4775 free_option_parameters(param);
4780 if (error_is_set(&local_err)) {
4781 error_propagate(errp, local_err);
4785 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
4787 /* Currently BlockDriverState always uses the main loop AioContext */
4788 return qemu_get_aio_context();
4791 void bdrv_add_before_write_notifier(BlockDriverState *bs,
4792 NotifierWithReturn *notifier)
4794 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
4797 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
4799 if (bs->drv->bdrv_amend_options == NULL) {
4802 return bs->drv->bdrv_amend_options(bs, options);
4805 ExtSnapshotPerm bdrv_check_ext_snapshot(BlockDriverState *bs)
4807 if (bs->drv->bdrv_check_ext_snapshot) {
4808 return bs->drv->bdrv_check_ext_snapshot(bs);
4811 if (bs->file && bs->file->drv && bs->file->drv->bdrv_check_ext_snapshot) {
4812 return bs->file->drv->bdrv_check_ext_snapshot(bs);
4815 /* external snapshots are allowed by default */
4816 return EXT_SNAPSHOT_ALLOWED;
4819 ExtSnapshotPerm bdrv_check_ext_snapshot_forbidden(BlockDriverState *bs)
4821 return EXT_SNAPSHOT_FORBIDDEN;