]> Git Repo - qemu.git/blob - target-arm/kvm_arm.h
virtio-ccw: range check in READ_VQ_CONF
[qemu.git] / target-arm / kvm_arm.h
1 /*
2  * QEMU KVM support -- ARM specific functions.
3  *
4  * Copyright (c) 2012 Linaro Limited
5  *
6  * This work is licensed under the terms of the GNU GPL, version 2 or later.
7  * See the COPYING file in the top-level directory.
8  *
9  */
10
11 #ifndef QEMU_KVM_ARM_H
12 #define QEMU_KVM_ARM_H
13
14 #include "sysemu/kvm.h"
15 #include "exec/memory.h"
16
17 /**
18  * kvm_arm_vcpu_init:
19  * @cs: CPUState
20  *
21  * Initialize (or reinitialize) the VCPU by invoking the
22  * KVM_ARM_VCPU_INIT ioctl with the CPU type and feature
23  * bitmask specified in the CPUState.
24  *
25  * Returns: 0 if success else < 0 error code
26  */
27 int kvm_arm_vcpu_init(CPUState *cs);
28
29 /**
30  * kvm_arm_register_device:
31  * @mr: memory region for this device
32  * @devid: the KVM device ID
33  * @group: device control API group for setting addresses
34  * @attr: device control API address type
35  * @dev_fd: device control device file descriptor (or -1 if not supported)
36  *
37  * Remember the memory region @mr, and when it is mapped by the
38  * machine model, tell the kernel that base address using the
39  * KVM_ARM_SET_DEVICE_ADDRESS ioctl or the newer device control API.  @devid
40  * should be the ID of the device as defined by KVM_ARM_SET_DEVICE_ADDRESS or
41  * the arm-vgic device in the device control API.
42  * The machine model may map
43  * and unmap the device multiple times; the kernel will only be told the final
44  * address at the point where machine init is complete.
45  */
46 void kvm_arm_register_device(MemoryRegion *mr, uint64_t devid, uint64_t group,
47                              uint64_t attr, int dev_fd);
48
49 /**
50  * kvm_arm_init_cpreg_list:
51  * @cs: CPUState
52  *
53  * Initialize the CPUState's cpreg list according to the kernel's
54  * definition of what CPU registers it knows about (and throw away
55  * the previous TCG-created cpreg list).
56  *
57  * Returns: 0 if success, else < 0 error code
58  */
59 int kvm_arm_init_cpreg_list(ARMCPU *cpu);
60
61 /**
62  * kvm_arm_reg_syncs_via_cpreg_list
63  * regidx: KVM register index
64  *
65  * Return true if this KVM register should be synchronized via the
66  * cpreg list of arbitrary system registers, false if it is synchronized
67  * by hand using code in kvm_arch_get/put_registers().
68  */
69 bool kvm_arm_reg_syncs_via_cpreg_list(uint64_t regidx);
70
71 /**
72  * write_list_to_kvmstate:
73  * @cpu: ARMCPU
74  *
75  * For each register listed in the ARMCPU cpreg_indexes list, write
76  * its value from the cpreg_values list into the kernel (via ioctl).
77  * This updates KVM's working data structures from TCG data or
78  * from incoming migration state.
79  *
80  * Returns: true if all register values were updated correctly,
81  * false if some register was unknown to the kernel or could not
82  * be written (eg constant register with the wrong value).
83  * Note that we do not stop early on failure -- we will attempt
84  * writing all registers in the list.
85  */
86 bool write_list_to_kvmstate(ARMCPU *cpu);
87
88 /**
89  * write_kvmstate_to_list:
90  * @cpu: ARMCPU
91  *
92  * For each register listed in the ARMCPU cpreg_indexes list, write
93  * its value from the kernel into the cpreg_values list. This is used to
94  * copy info from KVM's working data structures into TCG or
95  * for outbound migration.
96  *
97  * Returns: true if all register values were read correctly,
98  * false if some register was unknown or could not be read.
99  * Note that we do not stop early on failure -- we will attempt
100  * reading all registers in the list.
101  */
102 bool write_kvmstate_to_list(ARMCPU *cpu);
103
104 /**
105  * kvm_arm_reset_vcpu:
106  * @cpu: ARMCPU
107  *
108  * Called at reset time to kernel registers to their initial values.
109  */
110 void kvm_arm_reset_vcpu(ARMCPU *cpu);
111
112 #ifdef CONFIG_KVM
113 /**
114  * kvm_arm_create_scratch_host_vcpu:
115  * @cpus_to_try: array of QEMU_KVM_ARM_TARGET_* values (terminated with
116  * QEMU_KVM_ARM_TARGET_NONE) to try as fallback if the kernel does not
117  * know the PREFERRED_TARGET ioctl
118  * @fdarray: filled in with kvmfd, vmfd, cpufd file descriptors in that order
119  * @init: filled in with the necessary values for creating a host vcpu
120  *
121  * Create a scratch vcpu in its own VM of the type preferred by the host
122  * kernel (as would be used for '-cpu host'), for purposes of probing it
123  * for capabilities.
124  *
125  * Returns: true on success (and fdarray and init are filled in),
126  * false on failure (and fdarray and init are not valid).
127  */
128 bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try,
129                                       int *fdarray,
130                                       struct kvm_vcpu_init *init);
131
132 /**
133  * kvm_arm_destroy_scratch_host_vcpu:
134  * @fdarray: array of fds as set up by kvm_arm_create_scratch_host_vcpu
135  *
136  * Tear down the scratch vcpu created by kvm_arm_create_scratch_host_vcpu.
137  */
138 void kvm_arm_destroy_scratch_host_vcpu(int *fdarray);
139
140 #define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU
141 #define ARM_HOST_CPU_CLASS(klass) \
142     OBJECT_CLASS_CHECK(ARMHostCPUClass, (klass), TYPE_ARM_HOST_CPU)
143 #define ARM_HOST_CPU_GET_CLASS(obj) \
144     OBJECT_GET_CLASS(ARMHostCPUClass, (obj), TYPE_ARM_HOST_CPU)
145
146 typedef struct ARMHostCPUClass {
147     /*< private >*/
148     ARMCPUClass parent_class;
149     /*< public >*/
150
151     uint64_t features;
152     uint32_t target;
153     const char *dtb_compatible;
154 } ARMHostCPUClass;
155
156 /**
157  * kvm_arm_get_host_cpu_features:
158  * @ahcc: ARMHostCPUClass to fill in
159  *
160  * Probe the capabilities of the host kernel's preferred CPU and fill
161  * in the ARMHostCPUClass struct accordingly.
162  */
163 bool kvm_arm_get_host_cpu_features(ARMHostCPUClass *ahcc);
164
165 #endif
166
167 #endif
This page took 0.032627 seconds and 4 git commands to generate.