2 * QEMU ETRAX Ethernet Controller.
4 * Copyright (c) 2008 Edgar E. Iglesias, Axis Communications AB.
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
32 /* Advertisement control register. */
33 #define ADVERTISE_10HALF 0x0020 /* Try for 10mbps half-duplex */
34 #define ADVERTISE_10FULL 0x0040 /* Try for 10mbps full-duplex */
35 #define ADVERTISE_100HALF 0x0080 /* Try for 100mbps half-duplex */
36 #define ADVERTISE_100FULL 0x0100 /* Try for 100mbps full-duplex */
39 * The MDIO extensions in the TDK PHY model were reversed engineered from the
40 * linux driver (PHYID and Diagnostics reg).
41 * TODO: Add friendly names for the register nums.
49 unsigned int (*read)(struct qemu_phy *phy, unsigned int req);
50 void (*write)(struct qemu_phy *phy, unsigned int req,
54 static unsigned int tdk_read(struct qemu_phy *phy, unsigned int req)
66 /* Speeds and modes. */
67 r |= (1 << 13) | (1 << 14);
68 r |= (1 << 11) | (1 << 12);
69 r |= (1 << 5); /* Autoneg complete. */
70 r |= (1 << 3); /* Autoneg able. */
71 r |= (1 << 2); /* link. */
74 /* Link partner ability.
75 We are kind; always agree with whatever best mode
76 the guest advertises. */
77 r = 1 << 14; /* Success. */
78 /* Copy advertised modes. */
79 r |= phy->regs[4] & (15 << 5);
80 /* Autoneg support. */
85 /* Diagnostics reg. */
92 /* Are we advertising 100 half or 100 duplex ? */
93 speed_100 = !!(phy->regs[4] & ADVERTISE_100HALF);
94 speed_100 |= !!(phy->regs[4] & ADVERTISE_100FULL);
96 /* Are we advertising 10 duplex or 100 duplex ? */
97 duplex = !!(phy->regs[4] & ADVERTISE_100FULL);
98 duplex |= !!(phy->regs[4] & ADVERTISE_10FULL);
99 r = (speed_100 << 10) | (duplex << 11);
104 r = phy->regs[regnum];
107 D(printf("\n%s %x = reg[%d]\n", __func__, r, regnum));
112 tdk_write(struct qemu_phy *phy, unsigned int req, unsigned int data)
117 D(printf("%s reg[%d] = %x\n", __func__, regnum, data));
120 phy->regs[regnum] = data;
126 tdk_init(struct qemu_phy *phy)
128 phy->regs[0] = 0x3100;
130 phy->regs[2] = 0x0300;
131 phy->regs[3] = 0xe400;
132 /* Autonegotiation advertisement reg. */
133 phy->regs[4] = 0x01E1;
136 phy->read = tdk_read;
137 phy->write = tdk_write;
164 struct qemu_phy *devs[32];
168 mdio_attach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
170 bus->devs[addr & 0x1f] = phy;
173 #ifdef USE_THIS_DEAD_CODE
175 mdio_detach(struct qemu_mdio *bus, struct qemu_phy *phy, unsigned int addr)
177 bus->devs[addr & 0x1f] = NULL;
181 static void mdio_read_req(struct qemu_mdio *bus)
183 struct qemu_phy *phy;
185 phy = bus->devs[bus->addr];
186 if (phy && phy->read)
187 bus->data = phy->read(phy, bus->req);
192 static void mdio_write_req(struct qemu_mdio *bus)
194 struct qemu_phy *phy;
196 phy = bus->devs[bus->addr];
197 if (phy && phy->write)
198 phy->write(phy, bus->req, bus->data);
201 static void mdio_cycle(struct qemu_mdio *bus)
205 D(printf("mdc=%d mdio=%d state=%d cnt=%d drv=%d\n",
206 bus->mdc, bus->mdio, bus->state, bus->cnt, bus->drive));
209 printf("%d", bus->mdio);
215 if (bus->cnt >= (32 * 2) && !bus->mdio) {
225 printf("WARNING: no SOF\n");
226 if (bus->cnt == 1*2) {
236 bus->opc |= bus->mdio & 1;
237 if (bus->cnt == 2*2) {
247 bus->addr |= bus->mdio & 1;
249 if (bus->cnt == 5*2) {
259 bus->req |= bus->mdio & 1;
260 if (bus->cnt == 5*2) {
262 bus->state = TURNAROUND;
267 if (bus->mdc && bus->cnt == 2*2) {
274 bus->mdio = bus->data & 1;
282 bus->mdio = !!(bus->data & (1 << 15));
288 bus->data |= bus->mdio;
290 if (bus->cnt == 16 * 2) {
292 bus->state = PREAMBLE;
304 /* ETRAX-FS Ethernet MAC block starts here. */
306 #define RW_MA0_LO 0x00
307 #define RW_MA0_HI 0x01
308 #define RW_MA1_LO 0x02
309 #define RW_MA1_HI 0x03
310 #define RW_GA_LO 0x04
311 #define RW_GA_HI 0x05
312 #define RW_GEN_CTRL 0x06
313 #define RW_REC_CTRL 0x07
314 #define RW_TR_CTRL 0x08
315 #define RW_CLR_ERR 0x09
316 #define RW_MGM_CTRL 0x0a
318 #define FS_ETH_MAX_REGS 0x17
327 /* Two addrs in the filter. */
328 uint8_t macaddr[2][6];
329 uint32_t regs[FS_ETH_MAX_REGS];
331 struct etraxfs_dma_client *dma_out;
332 struct etraxfs_dma_client *dma_in;
335 struct qemu_mdio mdio_bus;
336 unsigned int phyaddr;
343 static void eth_validate_duplex(struct fs_eth *eth)
345 struct qemu_phy *phy;
346 unsigned int phy_duplex;
347 unsigned int mac_duplex;
350 phy = eth->mdio_bus.devs[eth->phyaddr];
351 phy_duplex = !!(phy->read(phy, 18) & (1 << 11));
352 mac_duplex = !!(eth->regs[RW_REC_CTRL] & 128);
354 if (mac_duplex != phy_duplex)
357 if (eth->regs[RW_GEN_CTRL] & 1) {
358 if (new_mm != eth->duplex_mismatch) {
360 printf("HW: WARNING "
361 "ETH duplex mismatch MAC=%d PHY=%d\n",
362 mac_duplex, phy_duplex);
364 printf("HW: ETH duplex ok.\n");
366 eth->duplex_mismatch = new_mm;
370 static uint32_t eth_readl (void *opaque, target_phys_addr_t addr)
372 struct fs_eth *eth = opaque;
379 r = eth->mdio_bus.mdio & 1;
383 D(printf ("%s %x\n", __func__, addr * 4));
389 static void eth_update_ma(struct fs_eth *eth, int ma)
400 eth->macaddr[ma][i++] = eth->regs[reg];
401 eth->macaddr[ma][i++] = eth->regs[reg] >> 8;
402 eth->macaddr[ma][i++] = eth->regs[reg] >> 16;
403 eth->macaddr[ma][i++] = eth->regs[reg] >> 24;
404 eth->macaddr[ma][i++] = eth->regs[reg + 4];
405 eth->macaddr[ma][i++] = eth->regs[reg + 4] >> 8;
407 D(printf("set mac%d=%x.%x.%x.%x.%x.%x\n", ma,
408 eth->macaddr[ma][0], eth->macaddr[ma][1],
409 eth->macaddr[ma][2], eth->macaddr[ma][3],
410 eth->macaddr[ma][4], eth->macaddr[ma][5]));
414 eth_writel (void *opaque, target_phys_addr_t addr, uint32_t value)
416 struct fs_eth *eth = opaque;
423 eth->regs[addr] = value;
424 eth_update_ma(eth, 0);
428 eth->regs[addr] = value;
429 eth_update_ma(eth, 1);
433 /* Attach an MDIO/PHY abstraction. */
435 eth->mdio_bus.mdio = value & 1;
436 if (eth->mdio_bus.mdc != (value & 4)) {
437 mdio_cycle(ð->mdio_bus);
438 eth_validate_duplex(eth);
440 eth->mdio_bus.mdc = !!(value & 4);
444 eth->regs[addr] = value;
445 eth_validate_duplex(eth);
449 eth->regs[addr] = value;
450 D(printf ("%s %x %x\n",
451 __func__, addr, value));
456 /* The ETRAX FS has a groupt address table (GAT) which works like a k=1 bloom
457 filter dropping group addresses we have not joined. The filter has 64
458 bits (m). The has function is a simple nible xor of the group addr. */
459 static int eth_match_groupaddr(struct fs_eth *eth, const unsigned char *sa)
462 int m_individual = eth->regs[RW_REC_CTRL] & 4;
465 /* First bit on the wire of a MAC address signals multicast or
467 if (!m_individual && !sa[0] & 1)
470 /* Calculate the hash index for the GA registers. */
473 hsh ^= ((*sa) >> 6) & 0x03;
475 hsh ^= ((*sa) << 2) & 0x03c;
476 hsh ^= ((*sa) >> 4) & 0xf;
478 hsh ^= ((*sa) << 4) & 0x30;
479 hsh ^= ((*sa) >> 2) & 0x3f;
482 hsh ^= ((*sa) >> 6) & 0x03;
484 hsh ^= ((*sa) << 2) & 0x03c;
485 hsh ^= ((*sa) >> 4) & 0xf;
487 hsh ^= ((*sa) << 4) & 0x30;
488 hsh ^= ((*sa) >> 2) & 0x3f;
492 match = eth->regs[RW_GA_HI] & (1 << (hsh - 32));
494 match = eth->regs[RW_GA_LO] & (1 << hsh);
495 D(printf("hsh=%x ga=%x.%x mtch=%d\n", hsh,
496 eth->regs[RW_GA_HI], eth->regs[RW_GA_LO], match));
500 static int eth_can_receive(void *opaque)
505 static void eth_receive(void *opaque, const uint8_t *buf, int size)
507 unsigned char sa_bcast[6] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
508 struct fs_eth *eth = opaque;
509 int use_ma0 = eth->regs[RW_REC_CTRL] & 1;
510 int use_ma1 = eth->regs[RW_REC_CTRL] & 2;
511 int r_bcast = eth->regs[RW_REC_CTRL] & 8;
516 D(printf("%x.%x.%x.%x.%x.%x ma=%d %d bc=%d\n",
517 buf[0], buf[1], buf[2], buf[3], buf[4], buf[5],
518 use_ma0, use_ma1, r_bcast));
520 /* Does the frame get through the address filters? */
521 if ((!use_ma0 || memcmp(buf, eth->macaddr[0], 6))
522 && (!use_ma1 || memcmp(buf, eth->macaddr[1], 6))
523 && (!r_bcast || memcmp(buf, sa_bcast, 6))
524 && !eth_match_groupaddr(eth, buf))
527 /* FIXME: Find another way to pass on the fake csum. */
528 etraxfs_dmac_input(eth->dma_in, (void *)buf, size + 4, 1);
531 static int eth_tx_push(void *opaque, unsigned char *buf, int len)
533 struct fs_eth *eth = opaque;
535 D(printf("%s buf=%p len=%d\n", __func__, buf, len));
536 qemu_send_packet(eth->vc, buf, len);
540 static void eth_set_link(VLANClientState *vc)
542 struct fs_eth *eth = vc->opaque;
543 D(printf("%s %d\n", __func__, vc->link_down));
544 eth->phy.link = !vc->link_down;
547 static CPUReadMemoryFunc *eth_read[] = {
552 static CPUWriteMemoryFunc *eth_write[] = {
557 static void eth_cleanup(VLANClientState *vc)
559 struct fs_eth *eth = vc->opaque;
561 cpu_unregister_io_memory(eth->ethregs);
563 qemu_free(eth->dma_out);
567 void *etraxfs_eth_init(NICInfo *nd, CPUState *env,
568 qemu_irq *irq, target_phys_addr_t base, int phyaddr)
570 struct etraxfs_dma_client *dma = NULL;
571 struct fs_eth *eth = NULL;
573 qemu_check_nic_model(nd, "fseth");
575 dma = qemu_mallocz(sizeof *dma * 2);
577 eth = qemu_mallocz(sizeof *eth);
579 dma[0].client.push = eth_tx_push;
580 dma[0].client.opaque = eth;
581 dma[1].client.opaque = eth;
582 dma[1].client.pull = NULL;
587 eth->dma_in = dma + 1;
589 /* Connect the phy. */
590 eth->phyaddr = phyaddr & 0x1f;
592 mdio_attach(ð->mdio_bus, ð->phy, eth->phyaddr);
594 eth->ethregs = cpu_register_io_memory(0, eth_read, eth_write, eth);
595 cpu_register_physical_memory (base, 0x5c, eth->ethregs);
597 eth->vc = qemu_new_vlan_client(nd->vlan, nd->model, nd->name,
598 eth_receive, eth_can_receive,
600 eth->vc->opaque = eth;
601 eth->vc->link_status_changed = eth_set_link;