]> Git Repo - qemu.git/blob - hw/sparc32_dma.c
pflash: Remove dead code, no functional changes.
[qemu.git] / hw / sparc32_dma.c
1 /*
2  * QEMU Sparc32 DMA controller emulation
3  *
4  * Copyright (c) 2006 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24
25 #include "hw.h"
26 #include "sparc32_dma.h"
27 #include "sun4m.h"
28 #include "sysbus.h"
29
30 /* debug DMA */
31 //#define DEBUG_DMA
32
33 /*
34  * This is the DMA controller part of chip STP2000 (Master I/O), also
35  * produced as NCR89C100. See
36  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
37  * and
38  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/DMA2.txt
39  */
40
41 #ifdef DEBUG_DMA
42 #define DPRINTF(fmt, ...)                               \
43     do { printf("DMA: " fmt , ## __VA_ARGS__); } while (0)
44 #else
45 #define DPRINTF(fmt, ...)
46 #endif
47
48 #define DMA_REGS 4
49 #define DMA_SIZE (4 * sizeof(uint32_t))
50 /* We need the mask, because one instance of the device is not page
51    aligned (ledma, start address 0x0010) */
52 #define DMA_MASK (DMA_SIZE - 1)
53
54 #define DMA_VER 0xa0000000
55 #define DMA_INTR 1
56 #define DMA_INTREN 0x10
57 #define DMA_WRITE_MEM 0x100
58 #define DMA_LOADED 0x04000000
59 #define DMA_DRAIN_FIFO 0x40
60 #define DMA_RESET 0x80
61
62 typedef struct DMAState DMAState;
63
64 struct DMAState {
65     SysBusDevice busdev;
66     uint32_t dmaregs[DMA_REGS];
67     qemu_irq irq;
68     void *iommu;
69     qemu_irq dev_reset;
70 };
71
72 /* Note: on sparc, the lance 16 bit bus is swapped */
73 void ledma_memory_read(void *opaque, target_phys_addr_t addr,
74                        uint8_t *buf, int len, int do_bswap)
75 {
76     DMAState *s = opaque;
77     int i;
78
79     DPRINTF("DMA write, direction: %c, addr 0x%8.8x\n",
80             s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
81     addr |= s->dmaregs[3];
82     if (do_bswap) {
83         sparc_iommu_memory_read(s->iommu, addr, buf, len);
84     } else {
85         addr &= ~1;
86         len &= ~1;
87         sparc_iommu_memory_read(s->iommu, addr, buf, len);
88         for(i = 0; i < len; i += 2) {
89             bswap16s((uint16_t *)(buf + i));
90         }
91     }
92 }
93
94 void ledma_memory_write(void *opaque, target_phys_addr_t addr,
95                         uint8_t *buf, int len, int do_bswap)
96 {
97     DMAState *s = opaque;
98     int l, i;
99     uint16_t tmp_buf[32];
100
101     DPRINTF("DMA read, direction: %c, addr 0x%8.8x\n",
102             s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
103     addr |= s->dmaregs[3];
104     if (do_bswap) {
105         sparc_iommu_memory_write(s->iommu, addr, buf, len);
106     } else {
107         addr &= ~1;
108         len &= ~1;
109         while (len > 0) {
110             l = len;
111             if (l > sizeof(tmp_buf))
112                 l = sizeof(tmp_buf);
113             for(i = 0; i < l; i += 2) {
114                 tmp_buf[i >> 1] = bswap16(*(uint16_t *)(buf + i));
115             }
116             sparc_iommu_memory_write(s->iommu, addr, (uint8_t *)tmp_buf, l);
117             len -= l;
118             buf += l;
119             addr += l;
120         }
121     }
122 }
123
124 static void dma_set_irq(void *opaque, int irq, int level)
125 {
126     DMAState *s = opaque;
127     if (level) {
128         DPRINTF("Raise IRQ\n");
129         s->dmaregs[0] |= DMA_INTR;
130         qemu_irq_raise(s->irq);
131     } else {
132         s->dmaregs[0] &= ~DMA_INTR;
133         DPRINTF("Lower IRQ\n");
134         qemu_irq_lower(s->irq);
135     }
136 }
137
138 void espdma_memory_read(void *opaque, uint8_t *buf, int len)
139 {
140     DMAState *s = opaque;
141
142     DPRINTF("DMA read, direction: %c, addr 0x%8.8x\n",
143             s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
144     sparc_iommu_memory_read(s->iommu, s->dmaregs[1], buf, len);
145     DPRINTF("Raise IRQ\n");
146     s->dmaregs[0] |= DMA_INTR;
147     s->dmaregs[1] += len;
148 }
149
150 void espdma_memory_write(void *opaque, uint8_t *buf, int len)
151 {
152     DMAState *s = opaque;
153
154     DPRINTF("DMA write, direction: %c, addr 0x%8.8x\n",
155             s->dmaregs[0] & DMA_WRITE_MEM ? 'w': 'r', s->dmaregs[1]);
156     sparc_iommu_memory_write(s->iommu, s->dmaregs[1], buf, len);
157     DPRINTF("Raise IRQ\n");
158     s->dmaregs[0] |= DMA_INTR;
159     s->dmaregs[1] += len;
160 }
161
162 static uint32_t dma_mem_readl(void *opaque, target_phys_addr_t addr)
163 {
164     DMAState *s = opaque;
165     uint32_t saddr;
166
167     saddr = (addr & DMA_MASK) >> 2;
168     DPRINTF("read dmareg " TARGET_FMT_plx ": 0x%8.8x\n", addr,
169             s->dmaregs[saddr]);
170
171     return s->dmaregs[saddr];
172 }
173
174 static void dma_mem_writel(void *opaque, target_phys_addr_t addr, uint32_t val)
175 {
176     DMAState *s = opaque;
177     uint32_t saddr;
178
179     saddr = (addr & DMA_MASK) >> 2;
180     DPRINTF("write dmareg " TARGET_FMT_plx ": 0x%8.8x -> 0x%8.8x\n", addr,
181             s->dmaregs[saddr], val);
182     switch (saddr) {
183     case 0:
184         if (!(val & DMA_INTREN)) {
185             DPRINTF("Lower IRQ\n");
186             qemu_irq_lower(s->irq);
187         }
188         if (val & DMA_RESET) {
189             qemu_irq_raise(s->dev_reset);
190             qemu_irq_lower(s->dev_reset);
191         } else if (val & DMA_DRAIN_FIFO) {
192             val &= ~DMA_DRAIN_FIFO;
193         } else if (val == 0)
194             val = DMA_DRAIN_FIFO;
195         val &= 0x0fffffff;
196         val |= DMA_VER;
197         break;
198     case 1:
199         s->dmaregs[0] |= DMA_LOADED;
200         break;
201     default:
202         break;
203     }
204     s->dmaregs[saddr] = val;
205 }
206
207 static CPUReadMemoryFunc * const dma_mem_read[3] = {
208     NULL,
209     NULL,
210     dma_mem_readl,
211 };
212
213 static CPUWriteMemoryFunc * const dma_mem_write[3] = {
214     NULL,
215     NULL,
216     dma_mem_writel,
217 };
218
219 static void dma_reset(DeviceState *d)
220 {
221     DMAState *s = container_of(d, DMAState, busdev.qdev);
222
223     memset(s->dmaregs, 0, DMA_SIZE);
224     s->dmaregs[0] = DMA_VER;
225 }
226
227 static const VMStateDescription vmstate_dma = {
228     .name ="sparc32_dma",
229     .version_id = 2,
230     .minimum_version_id = 2,
231     .minimum_version_id_old = 2,
232     .fields      = (VMStateField []) {
233         VMSTATE_UINT32_ARRAY(dmaregs, DMAState, DMA_REGS),
234         VMSTATE_END_OF_LIST()
235     }
236 };
237
238 static int sparc32_dma_init1(SysBusDevice *dev)
239 {
240     DMAState *s = FROM_SYSBUS(DMAState, dev);
241     int dma_io_memory;
242
243     sysbus_init_irq(dev, &s->irq);
244
245     dma_io_memory = cpu_register_io_memory(dma_mem_read, dma_mem_write, s);
246     sysbus_init_mmio(dev, DMA_SIZE, dma_io_memory);
247
248     qdev_init_gpio_in(&dev->qdev, dma_set_irq, 1);
249     qdev_init_gpio_out(&dev->qdev, &s->dev_reset, 1);
250
251     return 0;
252 }
253
254 static SysBusDeviceInfo sparc32_dma_info = {
255     .init = sparc32_dma_init1,
256     .qdev.name  = "sparc32_dma",
257     .qdev.size  = sizeof(DMAState),
258     .qdev.vmsd  = &vmstate_dma,
259     .qdev.reset = dma_reset,
260     .qdev.props = (Property[]) {
261         DEFINE_PROP_PTR("iommu_opaque", DMAState, iommu),
262         DEFINE_PROP_END_OF_LIST(),
263     }
264 };
265
266 static void sparc32_dma_register_devices(void)
267 {
268     sysbus_register_withprop(&sparc32_dma_info);
269 }
270
271 device_init(sparc32_dma_register_devices)
This page took 0.037846 seconds and 4 git commands to generate.