]> Git Repo - qemu.git/blob - block.c
virtio-blk: Drop VirtIOBlockRequest.read
[qemu.git] / block.c
1 /*
2  * QEMU System Emulator block driver
3  *
4  * Copyright (c) 2003 Fabrice Bellard
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
38
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
48
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
52
53 struct BdrvDirtyBitmap {
54     HBitmap *bitmap;
55     QLIST_ENTRY(BdrvDirtyBitmap) list;
56 };
57
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63         BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66         BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68                                          int64_t sector_num, int nb_sectors,
69                                          QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71                                          int64_t sector_num, int nb_sectors,
72                                          QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75     BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78     BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80                                                int64_t sector_num,
81                                                QEMUIOVector *qiov,
82                                                int nb_sectors,
83                                                BdrvRequestFlags flags,
84                                                BlockDriverCompletionFunc *cb,
85                                                void *opaque,
86                                                bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89     int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
90
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92     QTAILQ_HEAD_INITIALIZER(bdrv_states);
93
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95     QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
96
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98     QLIST_HEAD_INITIALIZER(bdrv_drivers);
99
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
102
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
105 {
106     return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107              (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108             filename[1] == ':');
109 }
110
111 int is_windows_drive(const char *filename)
112 {
113     if (is_windows_drive_prefix(filename) &&
114         filename[2] == '\0')
115         return 1;
116     if (strstart(filename, "\\\\.\\", NULL) ||
117         strstart(filename, "//./", NULL))
118         return 1;
119     return 0;
120 }
121 #endif
122
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125                         ThrottleConfig *cfg)
126 {
127     int i;
128
129     throttle_config(&bs->throttle_state, cfg);
130
131     for (i = 0; i < 2; i++) {
132         qemu_co_enter_next(&bs->throttled_reqs[i]);
133     }
134 }
135
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
138 {
139     bool drained = false;
140     bool enabled = bs->io_limits_enabled;
141     int i;
142
143     bs->io_limits_enabled = false;
144
145     for (i = 0; i < 2; i++) {
146         while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147             drained = true;
148         }
149     }
150
151     bs->io_limits_enabled = enabled;
152
153     return drained;
154 }
155
156 void bdrv_io_limits_disable(BlockDriverState *bs)
157 {
158     bs->io_limits_enabled = false;
159
160     bdrv_start_throttled_reqs(bs);
161
162     throttle_destroy(&bs->throttle_state);
163 }
164
165 static void bdrv_throttle_read_timer_cb(void *opaque)
166 {
167     BlockDriverState *bs = opaque;
168     qemu_co_enter_next(&bs->throttled_reqs[0]);
169 }
170
171 static void bdrv_throttle_write_timer_cb(void *opaque)
172 {
173     BlockDriverState *bs = opaque;
174     qemu_co_enter_next(&bs->throttled_reqs[1]);
175 }
176
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
179 {
180     assert(!bs->io_limits_enabled);
181     throttle_init(&bs->throttle_state,
182                   bdrv_get_aio_context(bs),
183                   QEMU_CLOCK_VIRTUAL,
184                   bdrv_throttle_read_timer_cb,
185                   bdrv_throttle_write_timer_cb,
186                   bs);
187     bs->io_limits_enabled = true;
188 }
189
190 /* This function makes an IO wait if needed
191  *
192  * @nb_sectors: the number of sectors of the IO
193  * @is_write:   is the IO a write
194  */
195 static void bdrv_io_limits_intercept(BlockDriverState *bs,
196                                      unsigned int bytes,
197                                      bool is_write)
198 {
199     /* does this io must wait */
200     bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201
202     /* if must wait or any request of this type throttled queue the IO */
203     if (must_wait ||
204         !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
205         qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
206     }
207
208     /* the IO will be executed, do the accounting */
209     throttle_account(&bs->throttle_state, is_write, bytes);
210
211
212     /* if the next request must wait -> do nothing */
213     if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214         return;
215     }
216
217     /* else queue next request for execution */
218     qemu_co_queue_next(&bs->throttled_reqs[is_write]);
219 }
220
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 {
223     if (!bs || !bs->drv) {
224         /* 4k should be on the safe side */
225         return 4096;
226     }
227
228     return bs->bl.opt_mem_alignment;
229 }
230
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
233 {
234     const char *p;
235
236 #ifdef _WIN32
237     if (is_windows_drive(path) ||
238         is_windows_drive_prefix(path)) {
239         return 0;
240     }
241     p = path + strcspn(path, ":/\\");
242 #else
243     p = path + strcspn(path, ":/");
244 #endif
245
246     return *p == ':';
247 }
248
249 int path_is_absolute(const char *path)
250 {
251 #ifdef _WIN32
252     /* specific case for names like: "\\.\d:" */
253     if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254         return 1;
255     }
256     return (*path == '/' || *path == '\\');
257 #else
258     return (*path == '/');
259 #endif
260 }
261
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263    path to it by considering it is relative to base_path. URL are
264    supported. */
265 void path_combine(char *dest, int dest_size,
266                   const char *base_path,
267                   const char *filename)
268 {
269     const char *p, *p1;
270     int len;
271
272     if (dest_size <= 0)
273         return;
274     if (path_is_absolute(filename)) {
275         pstrcpy(dest, dest_size, filename);
276     } else {
277         p = strchr(base_path, ':');
278         if (p)
279             p++;
280         else
281             p = base_path;
282         p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
284         {
285             const char *p2;
286             p2 = strrchr(base_path, '\\');
287             if (!p1 || p2 > p1)
288                 p1 = p2;
289         }
290 #endif
291         if (p1)
292             p1++;
293         else
294             p1 = base_path;
295         if (p1 > p)
296             p = p1;
297         len = p - base_path;
298         if (len > dest_size - 1)
299             len = dest_size - 1;
300         memcpy(dest, base_path, len);
301         dest[len] = '\0';
302         pstrcat(dest, dest_size, filename);
303     }
304 }
305
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 {
308     if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309         pstrcpy(dest, sz, bs->backing_file);
310     } else {
311         path_combine(dest, sz, bs->filename, bs->backing_file);
312     }
313 }
314
315 void bdrv_register(BlockDriver *bdrv)
316 {
317     /* Block drivers without coroutine functions need emulation */
318     if (!bdrv->bdrv_co_readv) {
319         bdrv->bdrv_co_readv = bdrv_co_readv_em;
320         bdrv->bdrv_co_writev = bdrv_co_writev_em;
321
322         /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323          * the block driver lacks aio we need to emulate that too.
324          */
325         if (!bdrv->bdrv_aio_readv) {
326             /* add AIO emulation layer */
327             bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328             bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
329         }
330     }
331
332     QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
333 }
334
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
337 {
338     BlockDriverState *bs;
339     int i;
340
341     if (bdrv_find(device_name)) {
342         error_setg(errp, "Device with id '%s' already exists",
343                    device_name);
344         return NULL;
345     }
346     if (bdrv_find_node(device_name)) {
347         error_setg(errp, "Device with node-name '%s' already exists",
348                    device_name);
349         return NULL;
350     }
351
352     bs = g_malloc0(sizeof(BlockDriverState));
353     QLIST_INIT(&bs->dirty_bitmaps);
354     pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
355     if (device_name[0] != '\0') {
356         QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
357     }
358     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
359         QLIST_INIT(&bs->op_blockers[i]);
360     }
361     bdrv_iostatus_disable(bs);
362     notifier_list_init(&bs->close_notifiers);
363     notifier_with_return_list_init(&bs->before_write_notifiers);
364     qemu_co_queue_init(&bs->throttled_reqs[0]);
365     qemu_co_queue_init(&bs->throttled_reqs[1]);
366     bs->refcnt = 1;
367     bs->aio_context = qemu_get_aio_context();
368
369     return bs;
370 }
371
372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
373 {
374     notifier_list_add(&bs->close_notifiers, notify);
375 }
376
377 BlockDriver *bdrv_find_format(const char *format_name)
378 {
379     BlockDriver *drv1;
380     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
381         if (!strcmp(drv1->format_name, format_name)) {
382             return drv1;
383         }
384     }
385     return NULL;
386 }
387
388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
389 {
390     static const char *whitelist_rw[] = {
391         CONFIG_BDRV_RW_WHITELIST
392     };
393     static const char *whitelist_ro[] = {
394         CONFIG_BDRV_RO_WHITELIST
395     };
396     const char **p;
397
398     if (!whitelist_rw[0] && !whitelist_ro[0]) {
399         return 1;               /* no whitelist, anything goes */
400     }
401
402     for (p = whitelist_rw; *p; p++) {
403         if (!strcmp(drv->format_name, *p)) {
404             return 1;
405         }
406     }
407     if (read_only) {
408         for (p = whitelist_ro; *p; p++) {
409             if (!strcmp(drv->format_name, *p)) {
410                 return 1;
411             }
412         }
413     }
414     return 0;
415 }
416
417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
418                                           bool read_only)
419 {
420     BlockDriver *drv = bdrv_find_format(format_name);
421     return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
422 }
423
424 typedef struct CreateCo {
425     BlockDriver *drv;
426     char *filename;
427     QemuOpts *opts;
428     int ret;
429     Error *err;
430 } CreateCo;
431
432 static void coroutine_fn bdrv_create_co_entry(void *opaque)
433 {
434     Error *local_err = NULL;
435     int ret;
436
437     CreateCo *cco = opaque;
438     assert(cco->drv);
439
440     ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err);
441     if (local_err) {
442         error_propagate(&cco->err, local_err);
443     }
444     cco->ret = ret;
445 }
446
447 int bdrv_create(BlockDriver *drv, const char* filename,
448                 QemuOpts *opts, Error **errp)
449 {
450     int ret;
451
452     Coroutine *co;
453     CreateCo cco = {
454         .drv = drv,
455         .filename = g_strdup(filename),
456         .opts = opts,
457         .ret = NOT_DONE,
458         .err = NULL,
459     };
460
461     if (!drv->bdrv_create) {
462         error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
463         ret = -ENOTSUP;
464         goto out;
465     }
466
467     if (qemu_in_coroutine()) {
468         /* Fast-path if already in coroutine context */
469         bdrv_create_co_entry(&cco);
470     } else {
471         co = qemu_coroutine_create(bdrv_create_co_entry);
472         qemu_coroutine_enter(co, &cco);
473         while (cco.ret == NOT_DONE) {
474             qemu_aio_wait();
475         }
476     }
477
478     ret = cco.ret;
479     if (ret < 0) {
480         if (cco.err) {
481             error_propagate(errp, cco.err);
482         } else {
483             error_setg_errno(errp, -ret, "Could not create image");
484         }
485     }
486
487 out:
488     g_free(cco.filename);
489     return ret;
490 }
491
492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
493 {
494     BlockDriver *drv;
495     Error *local_err = NULL;
496     int ret;
497
498     drv = bdrv_find_protocol(filename, true);
499     if (drv == NULL) {
500         error_setg(errp, "Could not find protocol for file '%s'", filename);
501         return -ENOENT;
502     }
503
504     ret = bdrv_create(drv, filename, opts, &local_err);
505     if (local_err) {
506         error_propagate(errp, local_err);
507     }
508     return ret;
509 }
510
511 int bdrv_refresh_limits(BlockDriverState *bs)
512 {
513     BlockDriver *drv = bs->drv;
514
515     memset(&bs->bl, 0, sizeof(bs->bl));
516
517     if (!drv) {
518         return 0;
519     }
520
521     /* Take some limits from the children as a default */
522     if (bs->file) {
523         bdrv_refresh_limits(bs->file);
524         bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
525         bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
526     } else {
527         bs->bl.opt_mem_alignment = 512;
528     }
529
530     if (bs->backing_hd) {
531         bdrv_refresh_limits(bs->backing_hd);
532         bs->bl.opt_transfer_length =
533             MAX(bs->bl.opt_transfer_length,
534                 bs->backing_hd->bl.opt_transfer_length);
535         bs->bl.opt_mem_alignment =
536             MAX(bs->bl.opt_mem_alignment,
537                 bs->backing_hd->bl.opt_mem_alignment);
538     }
539
540     /* Then let the driver override it */
541     if (drv->bdrv_refresh_limits) {
542         return drv->bdrv_refresh_limits(bs);
543     }
544
545     return 0;
546 }
547
548 /*
549  * Create a uniquely-named empty temporary file.
550  * Return 0 upon success, otherwise a negative errno value.
551  */
552 int get_tmp_filename(char *filename, int size)
553 {
554 #ifdef _WIN32
555     char temp_dir[MAX_PATH];
556     /* GetTempFileName requires that its output buffer (4th param)
557        have length MAX_PATH or greater.  */
558     assert(size >= MAX_PATH);
559     return (GetTempPath(MAX_PATH, temp_dir)
560             && GetTempFileName(temp_dir, "qem", 0, filename)
561             ? 0 : -GetLastError());
562 #else
563     int fd;
564     const char *tmpdir;
565     tmpdir = getenv("TMPDIR");
566     if (!tmpdir) {
567         tmpdir = "/var/tmp";
568     }
569     if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
570         return -EOVERFLOW;
571     }
572     fd = mkstemp(filename);
573     if (fd < 0) {
574         return -errno;
575     }
576     if (close(fd) != 0) {
577         unlink(filename);
578         return -errno;
579     }
580     return 0;
581 #endif
582 }
583
584 /*
585  * Detect host devices. By convention, /dev/cdrom[N] is always
586  * recognized as a host CDROM.
587  */
588 static BlockDriver *find_hdev_driver(const char *filename)
589 {
590     int score_max = 0, score;
591     BlockDriver *drv = NULL, *d;
592
593     QLIST_FOREACH(d, &bdrv_drivers, list) {
594         if (d->bdrv_probe_device) {
595             score = d->bdrv_probe_device(filename);
596             if (score > score_max) {
597                 score_max = score;
598                 drv = d;
599             }
600         }
601     }
602
603     return drv;
604 }
605
606 BlockDriver *bdrv_find_protocol(const char *filename,
607                                 bool allow_protocol_prefix)
608 {
609     BlockDriver *drv1;
610     char protocol[128];
611     int len;
612     const char *p;
613
614     /* TODO Drivers without bdrv_file_open must be specified explicitly */
615
616     /*
617      * XXX(hch): we really should not let host device detection
618      * override an explicit protocol specification, but moving this
619      * later breaks access to device names with colons in them.
620      * Thanks to the brain-dead persistent naming schemes on udev-
621      * based Linux systems those actually are quite common.
622      */
623     drv1 = find_hdev_driver(filename);
624     if (drv1) {
625         return drv1;
626     }
627
628     if (!path_has_protocol(filename) || !allow_protocol_prefix) {
629         return bdrv_find_format("file");
630     }
631
632     p = strchr(filename, ':');
633     assert(p != NULL);
634     len = p - filename;
635     if (len > sizeof(protocol) - 1)
636         len = sizeof(protocol) - 1;
637     memcpy(protocol, filename, len);
638     protocol[len] = '\0';
639     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
640         if (drv1->protocol_name &&
641             !strcmp(drv1->protocol_name, protocol)) {
642             return drv1;
643         }
644     }
645     return NULL;
646 }
647
648 static int find_image_format(BlockDriverState *bs, const char *filename,
649                              BlockDriver **pdrv, Error **errp)
650 {
651     int score, score_max;
652     BlockDriver *drv1, *drv;
653     uint8_t buf[2048];
654     int ret = 0;
655
656     /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
657     if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
658         drv = bdrv_find_format("raw");
659         if (!drv) {
660             error_setg(errp, "Could not find raw image format");
661             ret = -ENOENT;
662         }
663         *pdrv = drv;
664         return ret;
665     }
666
667     ret = bdrv_pread(bs, 0, buf, sizeof(buf));
668     if (ret < 0) {
669         error_setg_errno(errp, -ret, "Could not read image for determining its "
670                          "format");
671         *pdrv = NULL;
672         return ret;
673     }
674
675     score_max = 0;
676     drv = NULL;
677     QLIST_FOREACH(drv1, &bdrv_drivers, list) {
678         if (drv1->bdrv_probe) {
679             score = drv1->bdrv_probe(buf, ret, filename);
680             if (score > score_max) {
681                 score_max = score;
682                 drv = drv1;
683             }
684         }
685     }
686     if (!drv) {
687         error_setg(errp, "Could not determine image format: No compatible "
688                    "driver found");
689         ret = -ENOENT;
690     }
691     *pdrv = drv;
692     return ret;
693 }
694
695 /**
696  * Set the current 'total_sectors' value
697  */
698 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
699 {
700     BlockDriver *drv = bs->drv;
701
702     /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
703     if (bs->sg)
704         return 0;
705
706     /* query actual device if possible, otherwise just trust the hint */
707     if (drv->bdrv_getlength) {
708         int64_t length = drv->bdrv_getlength(bs);
709         if (length < 0) {
710             return length;
711         }
712         hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
713     }
714
715     bs->total_sectors = hint;
716     return 0;
717 }
718
719 /**
720  * Set open flags for a given discard mode
721  *
722  * Return 0 on success, -1 if the discard mode was invalid.
723  */
724 int bdrv_parse_discard_flags(const char *mode, int *flags)
725 {
726     *flags &= ~BDRV_O_UNMAP;
727
728     if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
729         /* do nothing */
730     } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
731         *flags |= BDRV_O_UNMAP;
732     } else {
733         return -1;
734     }
735
736     return 0;
737 }
738
739 /**
740  * Set open flags for a given cache mode
741  *
742  * Return 0 on success, -1 if the cache mode was invalid.
743  */
744 int bdrv_parse_cache_flags(const char *mode, int *flags)
745 {
746     *flags &= ~BDRV_O_CACHE_MASK;
747
748     if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
749         *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
750     } else if (!strcmp(mode, "directsync")) {
751         *flags |= BDRV_O_NOCACHE;
752     } else if (!strcmp(mode, "writeback")) {
753         *flags |= BDRV_O_CACHE_WB;
754     } else if (!strcmp(mode, "unsafe")) {
755         *flags |= BDRV_O_CACHE_WB;
756         *flags |= BDRV_O_NO_FLUSH;
757     } else if (!strcmp(mode, "writethrough")) {
758         /* this is the default */
759     } else {
760         return -1;
761     }
762
763     return 0;
764 }
765
766 /**
767  * The copy-on-read flag is actually a reference count so multiple users may
768  * use the feature without worrying about clobbering its previous state.
769  * Copy-on-read stays enabled until all users have called to disable it.
770  */
771 void bdrv_enable_copy_on_read(BlockDriverState *bs)
772 {
773     bs->copy_on_read++;
774 }
775
776 void bdrv_disable_copy_on_read(BlockDriverState *bs)
777 {
778     assert(bs->copy_on_read > 0);
779     bs->copy_on_read--;
780 }
781
782 /*
783  * Returns the flags that a temporary snapshot should get, based on the
784  * originally requested flags (the originally requested image will have flags
785  * like a backing file)
786  */
787 static int bdrv_temp_snapshot_flags(int flags)
788 {
789     return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
790 }
791
792 /*
793  * Returns the flags that bs->file should get, based on the given flags for
794  * the parent BDS
795  */
796 static int bdrv_inherited_flags(int flags)
797 {
798     /* Enable protocol handling, disable format probing for bs->file */
799     flags |= BDRV_O_PROTOCOL;
800
801     /* Our block drivers take care to send flushes and respect unmap policy,
802      * so we can enable both unconditionally on lower layers. */
803     flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
804
805     /* Clear flags that only apply to the top layer */
806     flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
807
808     return flags;
809 }
810
811 /*
812  * Returns the flags that bs->backing_hd should get, based on the given flags
813  * for the parent BDS
814  */
815 static int bdrv_backing_flags(int flags)
816 {
817     /* backing files always opened read-only */
818     flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
819
820     /* snapshot=on is handled on the top layer */
821     flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
822
823     return flags;
824 }
825
826 static int bdrv_open_flags(BlockDriverState *bs, int flags)
827 {
828     int open_flags = flags | BDRV_O_CACHE_WB;
829
830     /*
831      * Clear flags that are internal to the block layer before opening the
832      * image.
833      */
834     open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL);
835
836     /*
837      * Snapshots should be writable.
838      */
839     if (flags & BDRV_O_TEMPORARY) {
840         open_flags |= BDRV_O_RDWR;
841     }
842
843     return open_flags;
844 }
845
846 static void bdrv_assign_node_name(BlockDriverState *bs,
847                                   const char *node_name,
848                                   Error **errp)
849 {
850     if (!node_name) {
851         return;
852     }
853
854     /* empty string node name is invalid */
855     if (node_name[0] == '\0') {
856         error_setg(errp, "Empty node name");
857         return;
858     }
859
860     /* takes care of avoiding namespaces collisions */
861     if (bdrv_find(node_name)) {
862         error_setg(errp, "node-name=%s is conflicting with a device id",
863                    node_name);
864         return;
865     }
866
867     /* takes care of avoiding duplicates node names */
868     if (bdrv_find_node(node_name)) {
869         error_setg(errp, "Duplicate node name");
870         return;
871     }
872
873     /* copy node name into the bs and insert it into the graph list */
874     pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
875     QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
876 }
877
878 /*
879  * Common part for opening disk images and files
880  *
881  * Removes all processed options from *options.
882  */
883 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
884     QDict *options, int flags, BlockDriver *drv, Error **errp)
885 {
886     int ret, open_flags;
887     const char *filename;
888     const char *node_name = NULL;
889     Error *local_err = NULL;
890
891     assert(drv != NULL);
892     assert(bs->file == NULL);
893     assert(options != NULL && bs->options != options);
894
895     if (file != NULL) {
896         filename = file->filename;
897     } else {
898         filename = qdict_get_try_str(options, "filename");
899     }
900
901     if (drv->bdrv_needs_filename && !filename) {
902         error_setg(errp, "The '%s' block driver requires a file name",
903                    drv->format_name);
904         return -EINVAL;
905     }
906
907     trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
908
909     node_name = qdict_get_try_str(options, "node-name");
910     bdrv_assign_node_name(bs, node_name, &local_err);
911     if (local_err) {
912         error_propagate(errp, local_err);
913         return -EINVAL;
914     }
915     qdict_del(options, "node-name");
916
917     /* bdrv_open() with directly using a protocol as drv. This layer is already
918      * opened, so assign it to bs (while file becomes a closed BlockDriverState)
919      * and return immediately. */
920     if (file != NULL && drv->bdrv_file_open) {
921         bdrv_swap(file, bs);
922         return 0;
923     }
924
925     bs->open_flags = flags;
926     bs->guest_block_size = 512;
927     bs->request_alignment = 512;
928     bs->zero_beyond_eof = true;
929     open_flags = bdrv_open_flags(bs, flags);
930     bs->read_only = !(open_flags & BDRV_O_RDWR);
931     bs->growable = !!(flags & BDRV_O_PROTOCOL);
932
933     if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
934         error_setg(errp,
935                    !bs->read_only && bdrv_is_whitelisted(drv, true)
936                         ? "Driver '%s' can only be used for read-only devices"
937                         : "Driver '%s' is not whitelisted",
938                    drv->format_name);
939         return -ENOTSUP;
940     }
941
942     assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
943     if (flags & BDRV_O_COPY_ON_READ) {
944         if (!bs->read_only) {
945             bdrv_enable_copy_on_read(bs);
946         } else {
947             error_setg(errp, "Can't use copy-on-read on read-only device");
948             return -EINVAL;
949         }
950     }
951
952     if (filename != NULL) {
953         pstrcpy(bs->filename, sizeof(bs->filename), filename);
954     } else {
955         bs->filename[0] = '\0';
956     }
957
958     bs->drv = drv;
959     bs->opaque = g_malloc0(drv->instance_size);
960
961     bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
962
963     /* Open the image, either directly or using a protocol */
964     if (drv->bdrv_file_open) {
965         assert(file == NULL);
966         assert(!drv->bdrv_needs_filename || filename != NULL);
967         ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
968     } else {
969         if (file == NULL) {
970             error_setg(errp, "Can't use '%s' as a block driver for the "
971                        "protocol level", drv->format_name);
972             ret = -EINVAL;
973             goto free_and_fail;
974         }
975         bs->file = file;
976         ret = drv->bdrv_open(bs, options, open_flags, &local_err);
977     }
978
979     if (ret < 0) {
980         if (local_err) {
981             error_propagate(errp, local_err);
982         } else if (bs->filename[0]) {
983             error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
984         } else {
985             error_setg_errno(errp, -ret, "Could not open image");
986         }
987         goto free_and_fail;
988     }
989
990     ret = refresh_total_sectors(bs, bs->total_sectors);
991     if (ret < 0) {
992         error_setg_errno(errp, -ret, "Could not refresh total sector count");
993         goto free_and_fail;
994     }
995
996     bdrv_refresh_limits(bs);
997     assert(bdrv_opt_mem_align(bs) != 0);
998     assert((bs->request_alignment != 0) || bs->sg);
999     return 0;
1000
1001 free_and_fail:
1002     bs->file = NULL;
1003     g_free(bs->opaque);
1004     bs->opaque = NULL;
1005     bs->drv = NULL;
1006     return ret;
1007 }
1008
1009 static QDict *parse_json_filename(const char *filename, Error **errp)
1010 {
1011     QObject *options_obj;
1012     QDict *options;
1013     int ret;
1014
1015     ret = strstart(filename, "json:", &filename);
1016     assert(ret);
1017
1018     options_obj = qobject_from_json(filename);
1019     if (!options_obj) {
1020         error_setg(errp, "Could not parse the JSON options");
1021         return NULL;
1022     }
1023
1024     if (qobject_type(options_obj) != QTYPE_QDICT) {
1025         qobject_decref(options_obj);
1026         error_setg(errp, "Invalid JSON object given");
1027         return NULL;
1028     }
1029
1030     options = qobject_to_qdict(options_obj);
1031     qdict_flatten(options);
1032
1033     return options;
1034 }
1035
1036 /*
1037  * Fills in default options for opening images and converts the legacy
1038  * filename/flags pair to option QDict entries.
1039  */
1040 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags,
1041                              BlockDriver *drv, Error **errp)
1042 {
1043     const char *filename = *pfilename;
1044     const char *drvname;
1045     bool protocol = flags & BDRV_O_PROTOCOL;
1046     bool parse_filename = false;
1047     Error *local_err = NULL;
1048
1049     /* Parse json: pseudo-protocol */
1050     if (filename && g_str_has_prefix(filename, "json:")) {
1051         QDict *json_options = parse_json_filename(filename, &local_err);
1052         if (local_err) {
1053             error_propagate(errp, local_err);
1054             return -EINVAL;
1055         }
1056
1057         /* Options given in the filename have lower priority than options
1058          * specified directly */
1059         qdict_join(*options, json_options, false);
1060         QDECREF(json_options);
1061         *pfilename = filename = NULL;
1062     }
1063
1064     /* Fetch the file name from the options QDict if necessary */
1065     if (protocol && filename) {
1066         if (!qdict_haskey(*options, "filename")) {
1067             qdict_put(*options, "filename", qstring_from_str(filename));
1068             parse_filename = true;
1069         } else {
1070             error_setg(errp, "Can't specify 'file' and 'filename' options at "
1071                              "the same time");
1072             return -EINVAL;
1073         }
1074     }
1075
1076     /* Find the right block driver */
1077     filename = qdict_get_try_str(*options, "filename");
1078     drvname = qdict_get_try_str(*options, "driver");
1079
1080     if (drv) {
1081         if (drvname) {
1082             error_setg(errp, "Driver specified twice");
1083             return -EINVAL;
1084         }
1085         drvname = drv->format_name;
1086         qdict_put(*options, "driver", qstring_from_str(drvname));
1087     } else {
1088         if (!drvname && protocol) {
1089             if (filename) {
1090                 drv = bdrv_find_protocol(filename, parse_filename);
1091                 if (!drv) {
1092                     error_setg(errp, "Unknown protocol");
1093                     return -EINVAL;
1094                 }
1095
1096                 drvname = drv->format_name;
1097                 qdict_put(*options, "driver", qstring_from_str(drvname));
1098             } else {
1099                 error_setg(errp, "Must specify either driver or file");
1100                 return -EINVAL;
1101             }
1102         } else if (drvname) {
1103             drv = bdrv_find_format(drvname);
1104             if (!drv) {
1105                 error_setg(errp, "Unknown driver '%s'", drvname);
1106                 return -ENOENT;
1107             }
1108         }
1109     }
1110
1111     assert(drv || !protocol);
1112
1113     /* Driver-specific filename parsing */
1114     if (drv && drv->bdrv_parse_filename && parse_filename) {
1115         drv->bdrv_parse_filename(filename, *options, &local_err);
1116         if (local_err) {
1117             error_propagate(errp, local_err);
1118             return -EINVAL;
1119         }
1120
1121         if (!drv->bdrv_needs_filename) {
1122             qdict_del(*options, "filename");
1123         }
1124     }
1125
1126     return 0;
1127 }
1128
1129 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1130 {
1131
1132     if (bs->backing_hd) {
1133         assert(bs->backing_blocker);
1134         bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1135     } else if (backing_hd) {
1136         error_setg(&bs->backing_blocker,
1137                    "device is used as backing hd of '%s'",
1138                    bs->device_name);
1139     }
1140
1141     bs->backing_hd = backing_hd;
1142     if (!backing_hd) {
1143         error_free(bs->backing_blocker);
1144         bs->backing_blocker = NULL;
1145         goto out;
1146     }
1147     bs->open_flags &= ~BDRV_O_NO_BACKING;
1148     pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1149     pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1150             backing_hd->drv ? backing_hd->drv->format_name : "");
1151
1152     bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1153     /* Otherwise we won't be able to commit due to check in bdrv_commit */
1154     bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1155                     bs->backing_blocker);
1156 out:
1157     bdrv_refresh_limits(bs);
1158 }
1159
1160 /*
1161  * Opens the backing file for a BlockDriverState if not yet open
1162  *
1163  * options is a QDict of options to pass to the block drivers, or NULL for an
1164  * empty set of options. The reference to the QDict is transferred to this
1165  * function (even on failure), so if the caller intends to reuse the dictionary,
1166  * it needs to use QINCREF() before calling bdrv_file_open.
1167  */
1168 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1169 {
1170     char *backing_filename = g_malloc0(PATH_MAX);
1171     int ret = 0;
1172     BlockDriver *back_drv = NULL;
1173     BlockDriverState *backing_hd;
1174     Error *local_err = NULL;
1175
1176     if (bs->backing_hd != NULL) {
1177         QDECREF(options);
1178         goto free_exit;
1179     }
1180
1181     /* NULL means an empty set of options */
1182     if (options == NULL) {
1183         options = qdict_new();
1184     }
1185
1186     bs->open_flags &= ~BDRV_O_NO_BACKING;
1187     if (qdict_haskey(options, "file.filename")) {
1188         backing_filename[0] = '\0';
1189     } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1190         QDECREF(options);
1191         goto free_exit;
1192     } else {
1193         bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1194     }
1195
1196     if (!bs->drv || !bs->drv->supports_backing) {
1197         ret = -EINVAL;
1198         error_setg(errp, "Driver doesn't support backing files");
1199         QDECREF(options);
1200         goto free_exit;
1201     }
1202
1203     backing_hd = bdrv_new("", errp);
1204
1205     if (bs->backing_format[0] != '\0') {
1206         back_drv = bdrv_find_format(bs->backing_format);
1207     }
1208
1209     assert(bs->backing_hd == NULL);
1210     ret = bdrv_open(&backing_hd,
1211                     *backing_filename ? backing_filename : NULL, NULL, options,
1212                     bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1213     if (ret < 0) {
1214         bdrv_unref(backing_hd);
1215         backing_hd = NULL;
1216         bs->open_flags |= BDRV_O_NO_BACKING;
1217         error_setg(errp, "Could not open backing file: %s",
1218                    error_get_pretty(local_err));
1219         error_free(local_err);
1220         goto free_exit;
1221     }
1222     bdrv_set_backing_hd(bs, backing_hd);
1223
1224 free_exit:
1225     g_free(backing_filename);
1226     return ret;
1227 }
1228
1229 /*
1230  * Opens a disk image whose options are given as BlockdevRef in another block
1231  * device's options.
1232  *
1233  * If allow_none is true, no image will be opened if filename is false and no
1234  * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1235  *
1236  * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1237  * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1238  * itself, all options starting with "${bdref_key}." are considered part of the
1239  * BlockdevRef.
1240  *
1241  * The BlockdevRef will be removed from the options QDict.
1242  *
1243  * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1244  */
1245 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1246                     QDict *options, const char *bdref_key, int flags,
1247                     bool allow_none, Error **errp)
1248 {
1249     QDict *image_options;
1250     int ret;
1251     char *bdref_key_dot;
1252     const char *reference;
1253
1254     assert(pbs);
1255     assert(*pbs == NULL);
1256
1257     bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1258     qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1259     g_free(bdref_key_dot);
1260
1261     reference = qdict_get_try_str(options, bdref_key);
1262     if (!filename && !reference && !qdict_size(image_options)) {
1263         if (allow_none) {
1264             ret = 0;
1265         } else {
1266             error_setg(errp, "A block device must be specified for \"%s\"",
1267                        bdref_key);
1268             ret = -EINVAL;
1269         }
1270         QDECREF(image_options);
1271         goto done;
1272     }
1273
1274     ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1275
1276 done:
1277     qdict_del(options, bdref_key);
1278     return ret;
1279 }
1280
1281 void bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1282 {
1283     /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1284     char *tmp_filename = g_malloc0(PATH_MAX + 1);
1285     int64_t total_size;
1286     BlockDriver *bdrv_qcow2;
1287     QemuOpts *opts = NULL;
1288     QDict *snapshot_options;
1289     BlockDriverState *bs_snapshot;
1290     Error *local_err;
1291     int ret;
1292
1293     /* if snapshot, we create a temporary backing file and open it
1294        instead of opening 'filename' directly */
1295
1296     /* Get the required size from the image */
1297     total_size = bdrv_getlength(bs);
1298     if (total_size < 0) {
1299         error_setg_errno(errp, -total_size, "Could not get image size");
1300         goto out;
1301     }
1302     total_size &= BDRV_SECTOR_MASK;
1303
1304     /* Create the temporary image */
1305     ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1306     if (ret < 0) {
1307         error_setg_errno(errp, -ret, "Could not get temporary filename");
1308         goto out;
1309     }
1310
1311     bdrv_qcow2 = bdrv_find_format("qcow2");
1312     opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0,
1313                             &error_abort);
1314     qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size);
1315     ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err);
1316     qemu_opts_del(opts);
1317     if (ret < 0) {
1318         error_setg_errno(errp, -ret, "Could not create temporary overlay "
1319                          "'%s': %s", tmp_filename,
1320                          error_get_pretty(local_err));
1321         error_free(local_err);
1322         goto out;
1323     }
1324
1325     /* Prepare a new options QDict for the temporary file */
1326     snapshot_options = qdict_new();
1327     qdict_put(snapshot_options, "file.driver",
1328               qstring_from_str("file"));
1329     qdict_put(snapshot_options, "file.filename",
1330               qstring_from_str(tmp_filename));
1331
1332     bs_snapshot = bdrv_new("", &error_abort);
1333
1334     ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1335                     flags, bdrv_qcow2, &local_err);
1336     if (ret < 0) {
1337         error_propagate(errp, local_err);
1338         goto out;
1339     }
1340
1341     bdrv_append(bs_snapshot, bs);
1342
1343 out:
1344     g_free(tmp_filename);
1345 }
1346
1347 /*
1348  * Opens a disk image (raw, qcow2, vmdk, ...)
1349  *
1350  * options is a QDict of options to pass to the block drivers, or NULL for an
1351  * empty set of options. The reference to the QDict belongs to the block layer
1352  * after the call (even on failure), so if the caller intends to reuse the
1353  * dictionary, it needs to use QINCREF() before calling bdrv_open.
1354  *
1355  * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1356  * If it is not NULL, the referenced BDS will be reused.
1357  *
1358  * The reference parameter may be used to specify an existing block device which
1359  * should be opened. If specified, neither options nor a filename may be given,
1360  * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1361  */
1362 int bdrv_open(BlockDriverState **pbs, const char *filename,
1363               const char *reference, QDict *options, int flags,
1364               BlockDriver *drv, Error **errp)
1365 {
1366     int ret;
1367     BlockDriverState *file = NULL, *bs;
1368     const char *drvname;
1369     Error *local_err = NULL;
1370     int snapshot_flags = 0;
1371
1372     assert(pbs);
1373
1374     if (reference) {
1375         bool options_non_empty = options ? qdict_size(options) : false;
1376         QDECREF(options);
1377
1378         if (*pbs) {
1379             error_setg(errp, "Cannot reuse an existing BDS when referencing "
1380                        "another block device");
1381             return -EINVAL;
1382         }
1383
1384         if (filename || options_non_empty) {
1385             error_setg(errp, "Cannot reference an existing block device with "
1386                        "additional options or a new filename");
1387             return -EINVAL;
1388         }
1389
1390         bs = bdrv_lookup_bs(reference, reference, errp);
1391         if (!bs) {
1392             return -ENODEV;
1393         }
1394         bdrv_ref(bs);
1395         *pbs = bs;
1396         return 0;
1397     }
1398
1399     if (*pbs) {
1400         bs = *pbs;
1401     } else {
1402         bs = bdrv_new("", &error_abort);
1403     }
1404
1405     /* NULL means an empty set of options */
1406     if (options == NULL) {
1407         options = qdict_new();
1408     }
1409
1410     ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
1411     if (local_err) {
1412         goto fail;
1413     }
1414
1415     /* Find the right image format driver */
1416     drv = NULL;
1417     drvname = qdict_get_try_str(options, "driver");
1418     if (drvname) {
1419         drv = bdrv_find_format(drvname);
1420         qdict_del(options, "driver");
1421         if (!drv) {
1422             error_setg(errp, "Unknown driver: '%s'", drvname);
1423             ret = -EINVAL;
1424             goto fail;
1425         }
1426     }
1427
1428     assert(drvname || !(flags & BDRV_O_PROTOCOL));
1429     if (drv && !drv->bdrv_file_open) {
1430         /* If the user explicitly wants a format driver here, we'll need to add
1431          * another layer for the protocol in bs->file */
1432         flags &= ~BDRV_O_PROTOCOL;
1433     }
1434
1435     bs->options = options;
1436     options = qdict_clone_shallow(options);
1437
1438     /* Open image file without format layer */
1439     if ((flags & BDRV_O_PROTOCOL) == 0) {
1440         if (flags & BDRV_O_RDWR) {
1441             flags |= BDRV_O_ALLOW_RDWR;
1442         }
1443         if (flags & BDRV_O_SNAPSHOT) {
1444             snapshot_flags = bdrv_temp_snapshot_flags(flags);
1445             flags = bdrv_backing_flags(flags);
1446         }
1447
1448         assert(file == NULL);
1449         ret = bdrv_open_image(&file, filename, options, "file",
1450                               bdrv_inherited_flags(flags),
1451                               true, &local_err);
1452         if (ret < 0) {
1453             goto fail;
1454         }
1455     }
1456
1457     /* Image format probing */
1458     if (!drv && file) {
1459         ret = find_image_format(file, filename, &drv, &local_err);
1460         if (ret < 0) {
1461             goto fail;
1462         }
1463     } else if (!drv) {
1464         error_setg(errp, "Must specify either driver or file");
1465         ret = -EINVAL;
1466         goto fail;
1467     }
1468
1469     /* Open the image */
1470     ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1471     if (ret < 0) {
1472         goto fail;
1473     }
1474
1475     if (file && (bs->file != file)) {
1476         bdrv_unref(file);
1477         file = NULL;
1478     }
1479
1480     /* If there is a backing file, use it */
1481     if ((flags & BDRV_O_NO_BACKING) == 0) {
1482         QDict *backing_options;
1483
1484         qdict_extract_subqdict(options, &backing_options, "backing.");
1485         ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1486         if (ret < 0) {
1487             goto close_and_fail;
1488         }
1489     }
1490
1491     /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1492      * temporary snapshot afterwards. */
1493     if (snapshot_flags) {
1494         bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1495         if (local_err) {
1496             error_propagate(errp, local_err);
1497             goto close_and_fail;
1498         }
1499     }
1500
1501     /* Check if any unknown options were used */
1502     if (options && (qdict_size(options) != 0)) {
1503         const QDictEntry *entry = qdict_first(options);
1504         if (flags & BDRV_O_PROTOCOL) {
1505             error_setg(errp, "Block protocol '%s' doesn't support the option "
1506                        "'%s'", drv->format_name, entry->key);
1507         } else {
1508             error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1509                        "support the option '%s'", drv->format_name,
1510                        bs->device_name, entry->key);
1511         }
1512
1513         ret = -EINVAL;
1514         goto close_and_fail;
1515     }
1516
1517     if (!bdrv_key_required(bs)) {
1518         bdrv_dev_change_media_cb(bs, true);
1519     } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1520                && !runstate_check(RUN_STATE_INMIGRATE)
1521                && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1522         error_setg(errp,
1523                    "Guest must be stopped for opening of encrypted image");
1524         ret = -EBUSY;
1525         goto close_and_fail;
1526     }
1527
1528     QDECREF(options);
1529     *pbs = bs;
1530     return 0;
1531
1532 fail:
1533     if (file != NULL) {
1534         bdrv_unref(file);
1535     }
1536     QDECREF(bs->options);
1537     QDECREF(options);
1538     bs->options = NULL;
1539     if (!*pbs) {
1540         /* If *pbs is NULL, a new BDS has been created in this function and
1541            needs to be freed now. Otherwise, it does not need to be closed,
1542            since it has not really been opened yet. */
1543         bdrv_unref(bs);
1544     }
1545     if (local_err) {
1546         error_propagate(errp, local_err);
1547     }
1548     return ret;
1549
1550 close_and_fail:
1551     /* See fail path, but now the BDS has to be always closed */
1552     if (*pbs) {
1553         bdrv_close(bs);
1554     } else {
1555         bdrv_unref(bs);
1556     }
1557     QDECREF(options);
1558     if (local_err) {
1559         error_propagate(errp, local_err);
1560     }
1561     return ret;
1562 }
1563
1564 typedef struct BlockReopenQueueEntry {
1565      bool prepared;
1566      BDRVReopenState state;
1567      QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1568 } BlockReopenQueueEntry;
1569
1570 /*
1571  * Adds a BlockDriverState to a simple queue for an atomic, transactional
1572  * reopen of multiple devices.
1573  *
1574  * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1575  * already performed, or alternatively may be NULL a new BlockReopenQueue will
1576  * be created and initialized. This newly created BlockReopenQueue should be
1577  * passed back in for subsequent calls that are intended to be of the same
1578  * atomic 'set'.
1579  *
1580  * bs is the BlockDriverState to add to the reopen queue.
1581  *
1582  * flags contains the open flags for the associated bs
1583  *
1584  * returns a pointer to bs_queue, which is either the newly allocated
1585  * bs_queue, or the existing bs_queue being used.
1586  *
1587  */
1588 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1589                                     BlockDriverState *bs, int flags)
1590 {
1591     assert(bs != NULL);
1592
1593     BlockReopenQueueEntry *bs_entry;
1594     if (bs_queue == NULL) {
1595         bs_queue = g_new0(BlockReopenQueue, 1);
1596         QSIMPLEQ_INIT(bs_queue);
1597     }
1598
1599     /* bdrv_open() masks this flag out */
1600     flags &= ~BDRV_O_PROTOCOL;
1601
1602     if (bs->file) {
1603         bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1604     }
1605
1606     bs_entry = g_new0(BlockReopenQueueEntry, 1);
1607     QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1608
1609     bs_entry->state.bs = bs;
1610     bs_entry->state.flags = flags;
1611
1612     return bs_queue;
1613 }
1614
1615 /*
1616  * Reopen multiple BlockDriverStates atomically & transactionally.
1617  *
1618  * The queue passed in (bs_queue) must have been built up previous
1619  * via bdrv_reopen_queue().
1620  *
1621  * Reopens all BDS specified in the queue, with the appropriate
1622  * flags.  All devices are prepared for reopen, and failure of any
1623  * device will cause all device changes to be abandonded, and intermediate
1624  * data cleaned up.
1625  *
1626  * If all devices prepare successfully, then the changes are committed
1627  * to all devices.
1628  *
1629  */
1630 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1631 {
1632     int ret = -1;
1633     BlockReopenQueueEntry *bs_entry, *next;
1634     Error *local_err = NULL;
1635
1636     assert(bs_queue != NULL);
1637
1638     bdrv_drain_all();
1639
1640     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1641         if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1642             error_propagate(errp, local_err);
1643             goto cleanup;
1644         }
1645         bs_entry->prepared = true;
1646     }
1647
1648     /* If we reach this point, we have success and just need to apply the
1649      * changes
1650      */
1651     QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1652         bdrv_reopen_commit(&bs_entry->state);
1653     }
1654
1655     ret = 0;
1656
1657 cleanup:
1658     QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1659         if (ret && bs_entry->prepared) {
1660             bdrv_reopen_abort(&bs_entry->state);
1661         }
1662         g_free(bs_entry);
1663     }
1664     g_free(bs_queue);
1665     return ret;
1666 }
1667
1668
1669 /* Reopen a single BlockDriverState with the specified flags. */
1670 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1671 {
1672     int ret = -1;
1673     Error *local_err = NULL;
1674     BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1675
1676     ret = bdrv_reopen_multiple(queue, &local_err);
1677     if (local_err != NULL) {
1678         error_propagate(errp, local_err);
1679     }
1680     return ret;
1681 }
1682
1683
1684 /*
1685  * Prepares a BlockDriverState for reopen. All changes are staged in the
1686  * 'opaque' field of the BDRVReopenState, which is used and allocated by
1687  * the block driver layer .bdrv_reopen_prepare()
1688  *
1689  * bs is the BlockDriverState to reopen
1690  * flags are the new open flags
1691  * queue is the reopen queue
1692  *
1693  * Returns 0 on success, non-zero on error.  On error errp will be set
1694  * as well.
1695  *
1696  * On failure, bdrv_reopen_abort() will be called to clean up any data.
1697  * It is the responsibility of the caller to then call the abort() or
1698  * commit() for any other BDS that have been left in a prepare() state
1699  *
1700  */
1701 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1702                         Error **errp)
1703 {
1704     int ret = -1;
1705     Error *local_err = NULL;
1706     BlockDriver *drv;
1707
1708     assert(reopen_state != NULL);
1709     assert(reopen_state->bs->drv != NULL);
1710     drv = reopen_state->bs->drv;
1711
1712     /* if we are to stay read-only, do not allow permission change
1713      * to r/w */
1714     if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1715         reopen_state->flags & BDRV_O_RDWR) {
1716         error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1717                   reopen_state->bs->device_name);
1718         goto error;
1719     }
1720
1721
1722     ret = bdrv_flush(reopen_state->bs);
1723     if (ret) {
1724         error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1725                   strerror(-ret));
1726         goto error;
1727     }
1728
1729     if (drv->bdrv_reopen_prepare) {
1730         ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1731         if (ret) {
1732             if (local_err != NULL) {
1733                 error_propagate(errp, local_err);
1734             } else {
1735                 error_setg(errp, "failed while preparing to reopen image '%s'",
1736                            reopen_state->bs->filename);
1737             }
1738             goto error;
1739         }
1740     } else {
1741         /* It is currently mandatory to have a bdrv_reopen_prepare()
1742          * handler for each supported drv. */
1743         error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1744                   drv->format_name, reopen_state->bs->device_name,
1745                  "reopening of file");
1746         ret = -1;
1747         goto error;
1748     }
1749
1750     ret = 0;
1751
1752 error:
1753     return ret;
1754 }
1755
1756 /*
1757  * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1758  * makes them final by swapping the staging BlockDriverState contents into
1759  * the active BlockDriverState contents.
1760  */
1761 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1762 {
1763     BlockDriver *drv;
1764
1765     assert(reopen_state != NULL);
1766     drv = reopen_state->bs->drv;
1767     assert(drv != NULL);
1768
1769     /* If there are any driver level actions to take */
1770     if (drv->bdrv_reopen_commit) {
1771         drv->bdrv_reopen_commit(reopen_state);
1772     }
1773
1774     /* set BDS specific flags now */
1775     reopen_state->bs->open_flags         = reopen_state->flags;
1776     reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1777                                               BDRV_O_CACHE_WB);
1778     reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1779
1780     bdrv_refresh_limits(reopen_state->bs);
1781 }
1782
1783 /*
1784  * Abort the reopen, and delete and free the staged changes in
1785  * reopen_state
1786  */
1787 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1788 {
1789     BlockDriver *drv;
1790
1791     assert(reopen_state != NULL);
1792     drv = reopen_state->bs->drv;
1793     assert(drv != NULL);
1794
1795     if (drv->bdrv_reopen_abort) {
1796         drv->bdrv_reopen_abort(reopen_state);
1797     }
1798 }
1799
1800
1801 void bdrv_close(BlockDriverState *bs)
1802 {
1803     if (bs->job) {
1804         block_job_cancel_sync(bs->job);
1805     }
1806     bdrv_drain_all(); /* complete I/O */
1807     bdrv_flush(bs);
1808     bdrv_drain_all(); /* in case flush left pending I/O */
1809     notifier_list_notify(&bs->close_notifiers, bs);
1810
1811     if (bs->drv) {
1812         if (bs->backing_hd) {
1813             BlockDriverState *backing_hd = bs->backing_hd;
1814             bdrv_set_backing_hd(bs, NULL);
1815             bdrv_unref(backing_hd);
1816         }
1817         bs->drv->bdrv_close(bs);
1818         g_free(bs->opaque);
1819         bs->opaque = NULL;
1820         bs->drv = NULL;
1821         bs->copy_on_read = 0;
1822         bs->backing_file[0] = '\0';
1823         bs->backing_format[0] = '\0';
1824         bs->total_sectors = 0;
1825         bs->encrypted = 0;
1826         bs->valid_key = 0;
1827         bs->sg = 0;
1828         bs->growable = 0;
1829         bs->zero_beyond_eof = false;
1830         QDECREF(bs->options);
1831         bs->options = NULL;
1832
1833         if (bs->file != NULL) {
1834             bdrv_unref(bs->file);
1835             bs->file = NULL;
1836         }
1837     }
1838
1839     bdrv_dev_change_media_cb(bs, false);
1840
1841     /*throttling disk I/O limits*/
1842     if (bs->io_limits_enabled) {
1843         bdrv_io_limits_disable(bs);
1844     }
1845 }
1846
1847 void bdrv_close_all(void)
1848 {
1849     BlockDriverState *bs;
1850
1851     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1852         AioContext *aio_context = bdrv_get_aio_context(bs);
1853
1854         aio_context_acquire(aio_context);
1855         bdrv_close(bs);
1856         aio_context_release(aio_context);
1857     }
1858 }
1859
1860 /* Check if any requests are in-flight (including throttled requests) */
1861 static bool bdrv_requests_pending(BlockDriverState *bs)
1862 {
1863     if (!QLIST_EMPTY(&bs->tracked_requests)) {
1864         return true;
1865     }
1866     if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1867         return true;
1868     }
1869     if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1870         return true;
1871     }
1872     if (bs->file && bdrv_requests_pending(bs->file)) {
1873         return true;
1874     }
1875     if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1876         return true;
1877     }
1878     return false;
1879 }
1880
1881 /*
1882  * Wait for pending requests to complete across all BlockDriverStates
1883  *
1884  * This function does not flush data to disk, use bdrv_flush_all() for that
1885  * after calling this function.
1886  *
1887  * Note that completion of an asynchronous I/O operation can trigger any
1888  * number of other I/O operations on other devices---for example a coroutine
1889  * can be arbitrarily complex and a constant flow of I/O can come until the
1890  * coroutine is complete.  Because of this, it is not possible to have a
1891  * function to drain a single device's I/O queue.
1892  */
1893 void bdrv_drain_all(void)
1894 {
1895     /* Always run first iteration so any pending completion BHs run */
1896     bool busy = true;
1897     BlockDriverState *bs;
1898
1899     while (busy) {
1900         busy = false;
1901
1902         QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1903             AioContext *aio_context = bdrv_get_aio_context(bs);
1904             bool bs_busy;
1905
1906             aio_context_acquire(aio_context);
1907             bdrv_start_throttled_reqs(bs);
1908             bs_busy = bdrv_requests_pending(bs);
1909             bs_busy |= aio_poll(aio_context, bs_busy);
1910             aio_context_release(aio_context);
1911
1912             busy |= bs_busy;
1913         }
1914     }
1915 }
1916
1917 /* make a BlockDriverState anonymous by removing from bdrv_state and
1918  * graph_bdrv_state list.
1919    Also, NULL terminate the device_name to prevent double remove */
1920 void bdrv_make_anon(BlockDriverState *bs)
1921 {
1922     if (bs->device_name[0] != '\0') {
1923         QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1924     }
1925     bs->device_name[0] = '\0';
1926     if (bs->node_name[0] != '\0') {
1927         QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1928     }
1929     bs->node_name[0] = '\0';
1930 }
1931
1932 static void bdrv_rebind(BlockDriverState *bs)
1933 {
1934     if (bs->drv && bs->drv->bdrv_rebind) {
1935         bs->drv->bdrv_rebind(bs);
1936     }
1937 }
1938
1939 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1940                                      BlockDriverState *bs_src)
1941 {
1942     /* move some fields that need to stay attached to the device */
1943
1944     /* dev info */
1945     bs_dest->dev_ops            = bs_src->dev_ops;
1946     bs_dest->dev_opaque         = bs_src->dev_opaque;
1947     bs_dest->dev                = bs_src->dev;
1948     bs_dest->guest_block_size   = bs_src->guest_block_size;
1949     bs_dest->copy_on_read       = bs_src->copy_on_read;
1950
1951     bs_dest->enable_write_cache = bs_src->enable_write_cache;
1952
1953     /* i/o throttled req */
1954     memcpy(&bs_dest->throttle_state,
1955            &bs_src->throttle_state,
1956            sizeof(ThrottleState));
1957     bs_dest->throttled_reqs[0]  = bs_src->throttled_reqs[0];
1958     bs_dest->throttled_reqs[1]  = bs_src->throttled_reqs[1];
1959     bs_dest->io_limits_enabled  = bs_src->io_limits_enabled;
1960
1961     /* r/w error */
1962     bs_dest->on_read_error      = bs_src->on_read_error;
1963     bs_dest->on_write_error     = bs_src->on_write_error;
1964
1965     /* i/o status */
1966     bs_dest->iostatus_enabled   = bs_src->iostatus_enabled;
1967     bs_dest->iostatus           = bs_src->iostatus;
1968
1969     /* dirty bitmap */
1970     bs_dest->dirty_bitmaps      = bs_src->dirty_bitmaps;
1971
1972     /* reference count */
1973     bs_dest->refcnt             = bs_src->refcnt;
1974
1975     /* job */
1976     bs_dest->job                = bs_src->job;
1977
1978     /* keep the same entry in bdrv_states */
1979     pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1980             bs_src->device_name);
1981     bs_dest->device_list = bs_src->device_list;
1982     memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1983            sizeof(bs_dest->op_blockers));
1984 }
1985
1986 /*
1987  * Swap bs contents for two image chains while they are live,
1988  * while keeping required fields on the BlockDriverState that is
1989  * actually attached to a device.
1990  *
1991  * This will modify the BlockDriverState fields, and swap contents
1992  * between bs_new and bs_old. Both bs_new and bs_old are modified.
1993  *
1994  * bs_new is required to be anonymous.
1995  *
1996  * This function does not create any image files.
1997  */
1998 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1999 {
2000     BlockDriverState tmp;
2001
2002     /* The code needs to swap the node_name but simply swapping node_list won't
2003      * work so first remove the nodes from the graph list, do the swap then
2004      * insert them back if needed.
2005      */
2006     if (bs_new->node_name[0] != '\0') {
2007         QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2008     }
2009     if (bs_old->node_name[0] != '\0') {
2010         QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2011     }
2012
2013     /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2014     assert(bs_new->device_name[0] == '\0');
2015     assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2016     assert(bs_new->job == NULL);
2017     assert(bs_new->dev == NULL);
2018     assert(bs_new->io_limits_enabled == false);
2019     assert(!throttle_have_timer(&bs_new->throttle_state));
2020
2021     tmp = *bs_new;
2022     *bs_new = *bs_old;
2023     *bs_old = tmp;
2024
2025     /* there are some fields that should not be swapped, move them back */
2026     bdrv_move_feature_fields(&tmp, bs_old);
2027     bdrv_move_feature_fields(bs_old, bs_new);
2028     bdrv_move_feature_fields(bs_new, &tmp);
2029
2030     /* bs_new shouldn't be in bdrv_states even after the swap!  */
2031     assert(bs_new->device_name[0] == '\0');
2032
2033     /* Check a few fields that should remain attached to the device */
2034     assert(bs_new->dev == NULL);
2035     assert(bs_new->job == NULL);
2036     assert(bs_new->io_limits_enabled == false);
2037     assert(!throttle_have_timer(&bs_new->throttle_state));
2038
2039     /* insert the nodes back into the graph node list if needed */
2040     if (bs_new->node_name[0] != '\0') {
2041         QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2042     }
2043     if (bs_old->node_name[0] != '\0') {
2044         QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2045     }
2046
2047     bdrv_rebind(bs_new);
2048     bdrv_rebind(bs_old);
2049 }
2050
2051 /*
2052  * Add new bs contents at the top of an image chain while the chain is
2053  * live, while keeping required fields on the top layer.
2054  *
2055  * This will modify the BlockDriverState fields, and swap contents
2056  * between bs_new and bs_top. Both bs_new and bs_top are modified.
2057  *
2058  * bs_new is required to be anonymous.
2059  *
2060  * This function does not create any image files.
2061  */
2062 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2063 {
2064     bdrv_swap(bs_new, bs_top);
2065
2066     /* The contents of 'tmp' will become bs_top, as we are
2067      * swapping bs_new and bs_top contents. */
2068     bdrv_set_backing_hd(bs_top, bs_new);
2069 }
2070
2071 static void bdrv_delete(BlockDriverState *bs)
2072 {
2073     assert(!bs->dev);
2074     assert(!bs->job);
2075     assert(bdrv_op_blocker_is_empty(bs));
2076     assert(!bs->refcnt);
2077     assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2078
2079     bdrv_close(bs);
2080
2081     /* remove from list, if necessary */
2082     bdrv_make_anon(bs);
2083
2084     g_free(bs);
2085 }
2086
2087 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2088 /* TODO change to DeviceState *dev when all users are qdevified */
2089 {
2090     if (bs->dev) {
2091         return -EBUSY;
2092     }
2093     bs->dev = dev;
2094     bdrv_iostatus_reset(bs);
2095     return 0;
2096 }
2097
2098 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2099 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2100 {
2101     if (bdrv_attach_dev(bs, dev) < 0) {
2102         abort();
2103     }
2104 }
2105
2106 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2107 /* TODO change to DeviceState *dev when all users are qdevified */
2108 {
2109     assert(bs->dev == dev);
2110     bs->dev = NULL;
2111     bs->dev_ops = NULL;
2112     bs->dev_opaque = NULL;
2113     bs->guest_block_size = 512;
2114 }
2115
2116 /* TODO change to return DeviceState * when all users are qdevified */
2117 void *bdrv_get_attached_dev(BlockDriverState *bs)
2118 {
2119     return bs->dev;
2120 }
2121
2122 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2123                       void *opaque)
2124 {
2125     bs->dev_ops = ops;
2126     bs->dev_opaque = opaque;
2127 }
2128
2129 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2130 {
2131     if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2132         bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2133         bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2134         if (tray_was_closed) {
2135             /* tray open */
2136             qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2137                                               true, &error_abort);
2138         }
2139         if (load) {
2140             /* tray close */
2141             qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2142                                               false, &error_abort);
2143         }
2144     }
2145 }
2146
2147 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2148 {
2149     return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2150 }
2151
2152 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2153 {
2154     if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2155         bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2156     }
2157 }
2158
2159 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2160 {
2161     if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2162         return bs->dev_ops->is_tray_open(bs->dev_opaque);
2163     }
2164     return false;
2165 }
2166
2167 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2168 {
2169     if (bs->dev_ops && bs->dev_ops->resize_cb) {
2170         bs->dev_ops->resize_cb(bs->dev_opaque);
2171     }
2172 }
2173
2174 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2175 {
2176     if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2177         return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2178     }
2179     return false;
2180 }
2181
2182 /*
2183  * Run consistency checks on an image
2184  *
2185  * Returns 0 if the check could be completed (it doesn't mean that the image is
2186  * free of errors) or -errno when an internal error occurred. The results of the
2187  * check are stored in res.
2188  */
2189 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2190 {
2191     if (bs->drv->bdrv_check == NULL) {
2192         return -ENOTSUP;
2193     }
2194
2195     memset(res, 0, sizeof(*res));
2196     return bs->drv->bdrv_check(bs, res, fix);
2197 }
2198
2199 #define COMMIT_BUF_SECTORS 2048
2200
2201 /* commit COW file into the raw image */
2202 int bdrv_commit(BlockDriverState *bs)
2203 {
2204     BlockDriver *drv = bs->drv;
2205     int64_t sector, total_sectors, length, backing_length;
2206     int n, ro, open_flags;
2207     int ret = 0;
2208     uint8_t *buf = NULL;
2209     char filename[PATH_MAX];
2210
2211     if (!drv)
2212         return -ENOMEDIUM;
2213     
2214     if (!bs->backing_hd) {
2215         return -ENOTSUP;
2216     }
2217
2218     if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2219         bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2220         return -EBUSY;
2221     }
2222
2223     ro = bs->backing_hd->read_only;
2224     /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2225     pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2226     open_flags =  bs->backing_hd->open_flags;
2227
2228     if (ro) {
2229         if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2230             return -EACCES;
2231         }
2232     }
2233
2234     length = bdrv_getlength(bs);
2235     if (length < 0) {
2236         ret = length;
2237         goto ro_cleanup;
2238     }
2239
2240     backing_length = bdrv_getlength(bs->backing_hd);
2241     if (backing_length < 0) {
2242         ret = backing_length;
2243         goto ro_cleanup;
2244     }
2245
2246     /* If our top snapshot is larger than the backing file image,
2247      * grow the backing file image if possible.  If not possible,
2248      * we must return an error */
2249     if (length > backing_length) {
2250         ret = bdrv_truncate(bs->backing_hd, length);
2251         if (ret < 0) {
2252             goto ro_cleanup;
2253         }
2254     }
2255
2256     total_sectors = length >> BDRV_SECTOR_BITS;
2257     buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2258
2259     for (sector = 0; sector < total_sectors; sector += n) {
2260         ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2261         if (ret < 0) {
2262             goto ro_cleanup;
2263         }
2264         if (ret) {
2265             ret = bdrv_read(bs, sector, buf, n);
2266             if (ret < 0) {
2267                 goto ro_cleanup;
2268             }
2269
2270             ret = bdrv_write(bs->backing_hd, sector, buf, n);
2271             if (ret < 0) {
2272                 goto ro_cleanup;
2273             }
2274         }
2275     }
2276
2277     if (drv->bdrv_make_empty) {
2278         ret = drv->bdrv_make_empty(bs);
2279         if (ret < 0) {
2280             goto ro_cleanup;
2281         }
2282         bdrv_flush(bs);
2283     }
2284
2285     /*
2286      * Make sure all data we wrote to the backing device is actually
2287      * stable on disk.
2288      */
2289     if (bs->backing_hd) {
2290         bdrv_flush(bs->backing_hd);
2291     }
2292
2293     ret = 0;
2294 ro_cleanup:
2295     g_free(buf);
2296
2297     if (ro) {
2298         /* ignoring error return here */
2299         bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2300     }
2301
2302     return ret;
2303 }
2304
2305 int bdrv_commit_all(void)
2306 {
2307     BlockDriverState *bs;
2308
2309     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2310         AioContext *aio_context = bdrv_get_aio_context(bs);
2311
2312         aio_context_acquire(aio_context);
2313         if (bs->drv && bs->backing_hd) {
2314             int ret = bdrv_commit(bs);
2315             if (ret < 0) {
2316                 aio_context_release(aio_context);
2317                 return ret;
2318             }
2319         }
2320         aio_context_release(aio_context);
2321     }
2322     return 0;
2323 }
2324
2325 /**
2326  * Remove an active request from the tracked requests list
2327  *
2328  * This function should be called when a tracked request is completing.
2329  */
2330 static void tracked_request_end(BdrvTrackedRequest *req)
2331 {
2332     if (req->serialising) {
2333         req->bs->serialising_in_flight--;
2334     }
2335
2336     QLIST_REMOVE(req, list);
2337     qemu_co_queue_restart_all(&req->wait_queue);
2338 }
2339
2340 /**
2341  * Add an active request to the tracked requests list
2342  */
2343 static void tracked_request_begin(BdrvTrackedRequest *req,
2344                                   BlockDriverState *bs,
2345                                   int64_t offset,
2346                                   unsigned int bytes, bool is_write)
2347 {
2348     *req = (BdrvTrackedRequest){
2349         .bs = bs,
2350         .offset         = offset,
2351         .bytes          = bytes,
2352         .is_write       = is_write,
2353         .co             = qemu_coroutine_self(),
2354         .serialising    = false,
2355         .overlap_offset = offset,
2356         .overlap_bytes  = bytes,
2357     };
2358
2359     qemu_co_queue_init(&req->wait_queue);
2360
2361     QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2362 }
2363
2364 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2365 {
2366     int64_t overlap_offset = req->offset & ~(align - 1);
2367     unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2368                                - overlap_offset;
2369
2370     if (!req->serialising) {
2371         req->bs->serialising_in_flight++;
2372         req->serialising = true;
2373     }
2374
2375     req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2376     req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2377 }
2378
2379 /**
2380  * Round a region to cluster boundaries
2381  */
2382 void bdrv_round_to_clusters(BlockDriverState *bs,
2383                             int64_t sector_num, int nb_sectors,
2384                             int64_t *cluster_sector_num,
2385                             int *cluster_nb_sectors)
2386 {
2387     BlockDriverInfo bdi;
2388
2389     if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2390         *cluster_sector_num = sector_num;
2391         *cluster_nb_sectors = nb_sectors;
2392     } else {
2393         int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2394         *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2395         *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2396                                             nb_sectors, c);
2397     }
2398 }
2399
2400 static int bdrv_get_cluster_size(BlockDriverState *bs)
2401 {
2402     BlockDriverInfo bdi;
2403     int ret;
2404
2405     ret = bdrv_get_info(bs, &bdi);
2406     if (ret < 0 || bdi.cluster_size == 0) {
2407         return bs->request_alignment;
2408     } else {
2409         return bdi.cluster_size;
2410     }
2411 }
2412
2413 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2414                                      int64_t offset, unsigned int bytes)
2415 {
2416     /*        aaaa   bbbb */
2417     if (offset >= req->overlap_offset + req->overlap_bytes) {
2418         return false;
2419     }
2420     /* bbbb   aaaa        */
2421     if (req->overlap_offset >= offset + bytes) {
2422         return false;
2423     }
2424     return true;
2425 }
2426
2427 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2428 {
2429     BlockDriverState *bs = self->bs;
2430     BdrvTrackedRequest *req;
2431     bool retry;
2432     bool waited = false;
2433
2434     if (!bs->serialising_in_flight) {
2435         return false;
2436     }
2437
2438     do {
2439         retry = false;
2440         QLIST_FOREACH(req, &bs->tracked_requests, list) {
2441             if (req == self || (!req->serialising && !self->serialising)) {
2442                 continue;
2443             }
2444             if (tracked_request_overlaps(req, self->overlap_offset,
2445                                          self->overlap_bytes))
2446             {
2447                 /* Hitting this means there was a reentrant request, for
2448                  * example, a block driver issuing nested requests.  This must
2449                  * never happen since it means deadlock.
2450                  */
2451                 assert(qemu_coroutine_self() != req->co);
2452
2453                 /* If the request is already (indirectly) waiting for us, or
2454                  * will wait for us as soon as it wakes up, then just go on
2455                  * (instead of producing a deadlock in the former case). */
2456                 if (!req->waiting_for) {
2457                     self->waiting_for = req;
2458                     qemu_co_queue_wait(&req->wait_queue);
2459                     self->waiting_for = NULL;
2460                     retry = true;
2461                     waited = true;
2462                     break;
2463                 }
2464             }
2465         }
2466     } while (retry);
2467
2468     return waited;
2469 }
2470
2471 /*
2472  * Return values:
2473  * 0        - success
2474  * -EINVAL  - backing format specified, but no file
2475  * -ENOSPC  - can't update the backing file because no space is left in the
2476  *            image file header
2477  * -ENOTSUP - format driver doesn't support changing the backing file
2478  */
2479 int bdrv_change_backing_file(BlockDriverState *bs,
2480     const char *backing_file, const char *backing_fmt)
2481 {
2482     BlockDriver *drv = bs->drv;
2483     int ret;
2484
2485     /* Backing file format doesn't make sense without a backing file */
2486     if (backing_fmt && !backing_file) {
2487         return -EINVAL;
2488     }
2489
2490     if (drv->bdrv_change_backing_file != NULL) {
2491         ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2492     } else {
2493         ret = -ENOTSUP;
2494     }
2495
2496     if (ret == 0) {
2497         pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2498         pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2499     }
2500     return ret;
2501 }
2502
2503 /*
2504  * Finds the image layer in the chain that has 'bs' as its backing file.
2505  *
2506  * active is the current topmost image.
2507  *
2508  * Returns NULL if bs is not found in active's image chain,
2509  * or if active == bs.
2510  */
2511 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2512                                     BlockDriverState *bs)
2513 {
2514     BlockDriverState *overlay = NULL;
2515     BlockDriverState *intermediate;
2516
2517     assert(active != NULL);
2518     assert(bs != NULL);
2519
2520     /* if bs is the same as active, then by definition it has no overlay
2521      */
2522     if (active == bs) {
2523         return NULL;
2524     }
2525
2526     intermediate = active;
2527     while (intermediate->backing_hd) {
2528         if (intermediate->backing_hd == bs) {
2529             overlay = intermediate;
2530             break;
2531         }
2532         intermediate = intermediate->backing_hd;
2533     }
2534
2535     return overlay;
2536 }
2537
2538 typedef struct BlkIntermediateStates {
2539     BlockDriverState *bs;
2540     QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2541 } BlkIntermediateStates;
2542
2543
2544 /*
2545  * Drops images above 'base' up to and including 'top', and sets the image
2546  * above 'top' to have base as its backing file.
2547  *
2548  * Requires that the overlay to 'top' is opened r/w, so that the backing file
2549  * information in 'bs' can be properly updated.
2550  *
2551  * E.g., this will convert the following chain:
2552  * bottom <- base <- intermediate <- top <- active
2553  *
2554  * to
2555  *
2556  * bottom <- base <- active
2557  *
2558  * It is allowed for bottom==base, in which case it converts:
2559  *
2560  * base <- intermediate <- top <- active
2561  *
2562  * to
2563  *
2564  * base <- active
2565  *
2566  * Error conditions:
2567  *  if active == top, that is considered an error
2568  *
2569  */
2570 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2571                            BlockDriverState *base)
2572 {
2573     BlockDriverState *intermediate;
2574     BlockDriverState *base_bs = NULL;
2575     BlockDriverState *new_top_bs = NULL;
2576     BlkIntermediateStates *intermediate_state, *next;
2577     int ret = -EIO;
2578
2579     QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2580     QSIMPLEQ_INIT(&states_to_delete);
2581
2582     if (!top->drv || !base->drv) {
2583         goto exit;
2584     }
2585
2586     new_top_bs = bdrv_find_overlay(active, top);
2587
2588     if (new_top_bs == NULL) {
2589         /* we could not find the image above 'top', this is an error */
2590         goto exit;
2591     }
2592
2593     /* special case of new_top_bs->backing_hd already pointing to base - nothing
2594      * to do, no intermediate images */
2595     if (new_top_bs->backing_hd == base) {
2596         ret = 0;
2597         goto exit;
2598     }
2599
2600     intermediate = top;
2601
2602     /* now we will go down through the list, and add each BDS we find
2603      * into our deletion queue, until we hit the 'base'
2604      */
2605     while (intermediate) {
2606         intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2607         intermediate_state->bs = intermediate;
2608         QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2609
2610         if (intermediate->backing_hd == base) {
2611             base_bs = intermediate->backing_hd;
2612             break;
2613         }
2614         intermediate = intermediate->backing_hd;
2615     }
2616     if (base_bs == NULL) {
2617         /* something went wrong, we did not end at the base. safely
2618          * unravel everything, and exit with error */
2619         goto exit;
2620     }
2621
2622     /* success - we can delete the intermediate states, and link top->base */
2623     ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2624                                    base_bs->drv ? base_bs->drv->format_name : "");
2625     if (ret) {
2626         goto exit;
2627     }
2628     bdrv_set_backing_hd(new_top_bs, base_bs);
2629
2630     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2631         /* so that bdrv_close() does not recursively close the chain */
2632         bdrv_set_backing_hd(intermediate_state->bs, NULL);
2633         bdrv_unref(intermediate_state->bs);
2634     }
2635     ret = 0;
2636
2637 exit:
2638     QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2639         g_free(intermediate_state);
2640     }
2641     return ret;
2642 }
2643
2644
2645 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2646                                    size_t size)
2647 {
2648     int64_t len;
2649
2650     if (size > INT_MAX) {
2651         return -EIO;
2652     }
2653
2654     if (!bdrv_is_inserted(bs))
2655         return -ENOMEDIUM;
2656
2657     if (bs->growable)
2658         return 0;
2659
2660     len = bdrv_getlength(bs);
2661
2662     if (offset < 0)
2663         return -EIO;
2664
2665     if ((offset > len) || (len - offset < size))
2666         return -EIO;
2667
2668     return 0;
2669 }
2670
2671 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2672                               int nb_sectors)
2673 {
2674     if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2675         return -EIO;
2676     }
2677
2678     return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2679                                    nb_sectors * BDRV_SECTOR_SIZE);
2680 }
2681
2682 typedef struct RwCo {
2683     BlockDriverState *bs;
2684     int64_t offset;
2685     QEMUIOVector *qiov;
2686     bool is_write;
2687     int ret;
2688     BdrvRequestFlags flags;
2689 } RwCo;
2690
2691 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2692 {
2693     RwCo *rwco = opaque;
2694
2695     if (!rwco->is_write) {
2696         rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2697                                       rwco->qiov->size, rwco->qiov,
2698                                       rwco->flags);
2699     } else {
2700         rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2701                                        rwco->qiov->size, rwco->qiov,
2702                                        rwco->flags);
2703     }
2704 }
2705
2706 /*
2707  * Process a vectored synchronous request using coroutines
2708  */
2709 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2710                         QEMUIOVector *qiov, bool is_write,
2711                         BdrvRequestFlags flags)
2712 {
2713     Coroutine *co;
2714     RwCo rwco = {
2715         .bs = bs,
2716         .offset = offset,
2717         .qiov = qiov,
2718         .is_write = is_write,
2719         .ret = NOT_DONE,
2720         .flags = flags,
2721     };
2722
2723     /**
2724      * In sync call context, when the vcpu is blocked, this throttling timer
2725      * will not fire; so the I/O throttling function has to be disabled here
2726      * if it has been enabled.
2727      */
2728     if (bs->io_limits_enabled) {
2729         fprintf(stderr, "Disabling I/O throttling on '%s' due "
2730                         "to synchronous I/O.\n", bdrv_get_device_name(bs));
2731         bdrv_io_limits_disable(bs);
2732     }
2733
2734     if (qemu_in_coroutine()) {
2735         /* Fast-path if already in coroutine context */
2736         bdrv_rw_co_entry(&rwco);
2737     } else {
2738         AioContext *aio_context = bdrv_get_aio_context(bs);
2739
2740         co = qemu_coroutine_create(bdrv_rw_co_entry);
2741         qemu_coroutine_enter(co, &rwco);
2742         while (rwco.ret == NOT_DONE) {
2743             aio_poll(aio_context, true);
2744         }
2745     }
2746     return rwco.ret;
2747 }
2748
2749 /*
2750  * Process a synchronous request using coroutines
2751  */
2752 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2753                       int nb_sectors, bool is_write, BdrvRequestFlags flags)
2754 {
2755     QEMUIOVector qiov;
2756     struct iovec iov = {
2757         .iov_base = (void *)buf,
2758         .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2759     };
2760
2761     if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2762         return -EINVAL;
2763     }
2764
2765     qemu_iovec_init_external(&qiov, &iov, 1);
2766     return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2767                         &qiov, is_write, flags);
2768 }
2769
2770 /* return < 0 if error. See bdrv_write() for the return codes */
2771 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2772               uint8_t *buf, int nb_sectors)
2773 {
2774     return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2775 }
2776
2777 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2778 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2779                           uint8_t *buf, int nb_sectors)
2780 {
2781     bool enabled;
2782     int ret;
2783
2784     enabled = bs->io_limits_enabled;
2785     bs->io_limits_enabled = false;
2786     ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2787     bs->io_limits_enabled = enabled;
2788     return ret;
2789 }
2790
2791 /* Return < 0 if error. Important errors are:
2792   -EIO         generic I/O error (may happen for all errors)
2793   -ENOMEDIUM   No media inserted.
2794   -EINVAL      Invalid sector number or nb_sectors
2795   -EACCES      Trying to write a read-only device
2796 */
2797 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2798                const uint8_t *buf, int nb_sectors)
2799 {
2800     return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2801 }
2802
2803 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2804                       int nb_sectors, BdrvRequestFlags flags)
2805 {
2806     return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2807                       BDRV_REQ_ZERO_WRITE | flags);
2808 }
2809
2810 /*
2811  * Completely zero out a block device with the help of bdrv_write_zeroes.
2812  * The operation is sped up by checking the block status and only writing
2813  * zeroes to the device if they currently do not return zeroes. Optional
2814  * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2815  *
2816  * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2817  */
2818 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2819 {
2820     int64_t target_size;
2821     int64_t ret, nb_sectors, sector_num = 0;
2822     int n;
2823
2824     target_size = bdrv_getlength(bs);
2825     if (target_size < 0) {
2826         return target_size;
2827     }
2828     target_size /= BDRV_SECTOR_SIZE;
2829
2830     for (;;) {
2831         nb_sectors = target_size - sector_num;
2832         if (nb_sectors <= 0) {
2833             return 0;
2834         }
2835         if (nb_sectors > INT_MAX) {
2836             nb_sectors = INT_MAX;
2837         }
2838         ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2839         if (ret < 0) {
2840             error_report("error getting block status at sector %" PRId64 ": %s",
2841                          sector_num, strerror(-ret));
2842             return ret;
2843         }
2844         if (ret & BDRV_BLOCK_ZERO) {
2845             sector_num += n;
2846             continue;
2847         }
2848         ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2849         if (ret < 0) {
2850             error_report("error writing zeroes at sector %" PRId64 ": %s",
2851                          sector_num, strerror(-ret));
2852             return ret;
2853         }
2854         sector_num += n;
2855     }
2856 }
2857
2858 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2859 {
2860     QEMUIOVector qiov;
2861     struct iovec iov = {
2862         .iov_base = (void *)buf,
2863         .iov_len = bytes,
2864     };
2865     int ret;
2866
2867     if (bytes < 0) {
2868         return -EINVAL;
2869     }
2870
2871     qemu_iovec_init_external(&qiov, &iov, 1);
2872     ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2873     if (ret < 0) {
2874         return ret;
2875     }
2876
2877     return bytes;
2878 }
2879
2880 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2881 {
2882     int ret;
2883
2884     ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2885     if (ret < 0) {
2886         return ret;
2887     }
2888
2889     return qiov->size;
2890 }
2891
2892 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2893                 const void *buf, int bytes)
2894 {
2895     QEMUIOVector qiov;
2896     struct iovec iov = {
2897         .iov_base   = (void *) buf,
2898         .iov_len    = bytes,
2899     };
2900
2901     if (bytes < 0) {
2902         return -EINVAL;
2903     }
2904
2905     qemu_iovec_init_external(&qiov, &iov, 1);
2906     return bdrv_pwritev(bs, offset, &qiov);
2907 }
2908
2909 /*
2910  * Writes to the file and ensures that no writes are reordered across this
2911  * request (acts as a barrier)
2912  *
2913  * Returns 0 on success, -errno in error cases.
2914  */
2915 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2916     const void *buf, int count)
2917 {
2918     int ret;
2919
2920     ret = bdrv_pwrite(bs, offset, buf, count);
2921     if (ret < 0) {
2922         return ret;
2923     }
2924
2925     /* No flush needed for cache modes that already do it */
2926     if (bs->enable_write_cache) {
2927         bdrv_flush(bs);
2928     }
2929
2930     return 0;
2931 }
2932
2933 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2934         int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2935 {
2936     /* Perform I/O through a temporary buffer so that users who scribble over
2937      * their read buffer while the operation is in progress do not end up
2938      * modifying the image file.  This is critical for zero-copy guest I/O
2939      * where anything might happen inside guest memory.
2940      */
2941     void *bounce_buffer;
2942
2943     BlockDriver *drv = bs->drv;
2944     struct iovec iov;
2945     QEMUIOVector bounce_qiov;
2946     int64_t cluster_sector_num;
2947     int cluster_nb_sectors;
2948     size_t skip_bytes;
2949     int ret;
2950
2951     /* Cover entire cluster so no additional backing file I/O is required when
2952      * allocating cluster in the image file.
2953      */
2954     bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2955                            &cluster_sector_num, &cluster_nb_sectors);
2956
2957     trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2958                                    cluster_sector_num, cluster_nb_sectors);
2959
2960     iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2961     iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2962     qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2963
2964     ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2965                              &bounce_qiov);
2966     if (ret < 0) {
2967         goto err;
2968     }
2969
2970     if (drv->bdrv_co_write_zeroes &&
2971         buffer_is_zero(bounce_buffer, iov.iov_len)) {
2972         ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2973                                       cluster_nb_sectors, 0);
2974     } else {
2975         /* This does not change the data on the disk, it is not necessary
2976          * to flush even in cache=writethrough mode.
2977          */
2978         ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2979                                   &bounce_qiov);
2980     }
2981
2982     if (ret < 0) {
2983         /* It might be okay to ignore write errors for guest requests.  If this
2984          * is a deliberate copy-on-read then we don't want to ignore the error.
2985          * Simply report it in all cases.
2986          */
2987         goto err;
2988     }
2989
2990     skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2991     qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2992                         nb_sectors * BDRV_SECTOR_SIZE);
2993
2994 err:
2995     qemu_vfree(bounce_buffer);
2996     return ret;
2997 }
2998
2999 /*
3000  * Forwards an already correctly aligned request to the BlockDriver. This
3001  * handles copy on read and zeroing after EOF; any other features must be
3002  * implemented by the caller.
3003  */
3004 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3005     BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3006     int64_t align, QEMUIOVector *qiov, int flags)
3007 {
3008     BlockDriver *drv = bs->drv;
3009     int ret;
3010
3011     int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3012     unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3013
3014     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3015     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3016
3017     /* Handle Copy on Read and associated serialisation */
3018     if (flags & BDRV_REQ_COPY_ON_READ) {
3019         /* If we touch the same cluster it counts as an overlap.  This
3020          * guarantees that allocating writes will be serialized and not race
3021          * with each other for the same cluster.  For example, in copy-on-read
3022          * it ensures that the CoR read and write operations are atomic and
3023          * guest writes cannot interleave between them. */
3024         mark_request_serialising(req, bdrv_get_cluster_size(bs));
3025     }
3026
3027     wait_serialising_requests(req);
3028
3029     if (flags & BDRV_REQ_COPY_ON_READ) {
3030         int pnum;
3031
3032         ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3033         if (ret < 0) {
3034             goto out;
3035         }
3036
3037         if (!ret || pnum != nb_sectors) {
3038             ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3039             goto out;
3040         }
3041     }
3042
3043     /* Forward the request to the BlockDriver */
3044     if (!(bs->zero_beyond_eof && bs->growable)) {
3045         ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3046     } else {
3047         /* Read zeros after EOF of growable BDSes */
3048         int64_t len, total_sectors, max_nb_sectors;
3049
3050         len = bdrv_getlength(bs);
3051         if (len < 0) {
3052             ret = len;
3053             goto out;
3054         }
3055
3056         total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3057         max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3058                                   align >> BDRV_SECTOR_BITS);
3059         if (max_nb_sectors > 0) {
3060             ret = drv->bdrv_co_readv(bs, sector_num,
3061                                      MIN(nb_sectors, max_nb_sectors), qiov);
3062         } else {
3063             ret = 0;
3064         }
3065
3066         /* Reading beyond end of file is supposed to produce zeroes */
3067         if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3068             uint64_t offset = MAX(0, total_sectors - sector_num);
3069             uint64_t bytes = (sector_num + nb_sectors - offset) *
3070                               BDRV_SECTOR_SIZE;
3071             qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3072         }
3073     }
3074
3075 out:
3076     return ret;
3077 }
3078
3079 /*
3080  * Handle a read request in coroutine context
3081  */
3082 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3083     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3084     BdrvRequestFlags flags)
3085 {
3086     BlockDriver *drv = bs->drv;
3087     BdrvTrackedRequest req;
3088
3089     /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3090     uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3091     uint8_t *head_buf = NULL;
3092     uint8_t *tail_buf = NULL;
3093     QEMUIOVector local_qiov;
3094     bool use_local_qiov = false;
3095     int ret;
3096
3097     if (!drv) {
3098         return -ENOMEDIUM;
3099     }
3100     if (bdrv_check_byte_request(bs, offset, bytes)) {
3101         return -EIO;
3102     }
3103
3104     if (bs->copy_on_read) {
3105         flags |= BDRV_REQ_COPY_ON_READ;
3106     }
3107
3108     /* throttling disk I/O */
3109     if (bs->io_limits_enabled) {
3110         bdrv_io_limits_intercept(bs, bytes, false);
3111     }
3112
3113     /* Align read if necessary by padding qiov */
3114     if (offset & (align - 1)) {
3115         head_buf = qemu_blockalign(bs, align);
3116         qemu_iovec_init(&local_qiov, qiov->niov + 2);
3117         qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3118         qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3119         use_local_qiov = true;
3120
3121         bytes += offset & (align - 1);
3122         offset = offset & ~(align - 1);
3123     }
3124
3125     if ((offset + bytes) & (align - 1)) {
3126         if (!use_local_qiov) {
3127             qemu_iovec_init(&local_qiov, qiov->niov + 1);
3128             qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3129             use_local_qiov = true;
3130         }
3131         tail_buf = qemu_blockalign(bs, align);
3132         qemu_iovec_add(&local_qiov, tail_buf,
3133                        align - ((offset + bytes) & (align - 1)));
3134
3135         bytes = ROUND_UP(bytes, align);
3136     }
3137
3138     tracked_request_begin(&req, bs, offset, bytes, false);
3139     ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3140                               use_local_qiov ? &local_qiov : qiov,
3141                               flags);
3142     tracked_request_end(&req);
3143
3144     if (use_local_qiov) {
3145         qemu_iovec_destroy(&local_qiov);
3146         qemu_vfree(head_buf);
3147         qemu_vfree(tail_buf);
3148     }
3149
3150     return ret;
3151 }
3152
3153 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3154     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3155     BdrvRequestFlags flags)
3156 {
3157     if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3158         return -EINVAL;
3159     }
3160
3161     return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3162                              nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3163 }
3164
3165 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3166     int nb_sectors, QEMUIOVector *qiov)
3167 {
3168     trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3169
3170     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3171 }
3172
3173 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3174     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3175 {
3176     trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3177
3178     return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3179                             BDRV_REQ_COPY_ON_READ);
3180 }
3181
3182 /* if no limit is specified in the BlockLimits use a default
3183  * of 32768 512-byte sectors (16 MiB) per request.
3184  */
3185 #define MAX_WRITE_ZEROES_DEFAULT 32768
3186
3187 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3188     int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3189 {
3190     BlockDriver *drv = bs->drv;
3191     QEMUIOVector qiov;
3192     struct iovec iov = {0};
3193     int ret = 0;
3194
3195     int max_write_zeroes = bs->bl.max_write_zeroes ?
3196                            bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3197
3198     while (nb_sectors > 0 && !ret) {
3199         int num = nb_sectors;
3200
3201         /* Align request.  Block drivers can expect the "bulk" of the request
3202          * to be aligned.
3203          */
3204         if (bs->bl.write_zeroes_alignment
3205             && num > bs->bl.write_zeroes_alignment) {
3206             if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3207                 /* Make a small request up to the first aligned sector.  */
3208                 num = bs->bl.write_zeroes_alignment;
3209                 num -= sector_num % bs->bl.write_zeroes_alignment;
3210             } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3211                 /* Shorten the request to the last aligned sector.  num cannot
3212                  * underflow because num > bs->bl.write_zeroes_alignment.
3213                  */
3214                 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3215             }
3216         }
3217
3218         /* limit request size */
3219         if (num > max_write_zeroes) {
3220             num = max_write_zeroes;
3221         }
3222
3223         ret = -ENOTSUP;
3224         /* First try the efficient write zeroes operation */
3225         if (drv->bdrv_co_write_zeroes) {
3226             ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3227         }
3228
3229         if (ret == -ENOTSUP) {
3230             /* Fall back to bounce buffer if write zeroes is unsupported */
3231             iov.iov_len = num * BDRV_SECTOR_SIZE;
3232             if (iov.iov_base == NULL) {
3233                 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3234                 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3235             }
3236             qemu_iovec_init_external(&qiov, &iov, 1);
3237
3238             ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3239
3240             /* Keep bounce buffer around if it is big enough for all
3241              * all future requests.
3242              */
3243             if (num < max_write_zeroes) {
3244                 qemu_vfree(iov.iov_base);
3245                 iov.iov_base = NULL;
3246             }
3247         }
3248
3249         sector_num += num;
3250         nb_sectors -= num;
3251     }
3252
3253     qemu_vfree(iov.iov_base);
3254     return ret;
3255 }
3256
3257 /*
3258  * Forwards an already correctly aligned write request to the BlockDriver.
3259  */
3260 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3261     BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3262     QEMUIOVector *qiov, int flags)
3263 {
3264     BlockDriver *drv = bs->drv;
3265     bool waited;
3266     int ret;
3267
3268     int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3269     unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3270
3271     assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3272     assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3273
3274     waited = wait_serialising_requests(req);
3275     assert(!waited || !req->serialising);
3276     assert(req->overlap_offset <= offset);
3277     assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3278
3279     ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3280
3281     if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3282         !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3283         qemu_iovec_is_zero(qiov)) {
3284         flags |= BDRV_REQ_ZERO_WRITE;
3285         if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3286             flags |= BDRV_REQ_MAY_UNMAP;
3287         }
3288     }
3289
3290     if (ret < 0) {
3291         /* Do nothing, write notifier decided to fail this request */
3292     } else if (flags & BDRV_REQ_ZERO_WRITE) {
3293         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3294         ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3295     } else {
3296         BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3297         ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3298     }
3299     BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3300
3301     if (ret == 0 && !bs->enable_write_cache) {
3302         ret = bdrv_co_flush(bs);
3303     }
3304
3305     bdrv_set_dirty(bs, sector_num, nb_sectors);
3306
3307     if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3308         bs->wr_highest_sector = sector_num + nb_sectors - 1;
3309     }
3310     if (bs->growable && ret >= 0) {
3311         bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3312     }
3313
3314     return ret;
3315 }
3316
3317 /*
3318  * Handle a write request in coroutine context
3319  */
3320 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3321     int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3322     BdrvRequestFlags flags)
3323 {
3324     BdrvTrackedRequest req;
3325     /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3326     uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3327     uint8_t *head_buf = NULL;
3328     uint8_t *tail_buf = NULL;
3329     QEMUIOVector local_qiov;
3330     bool use_local_qiov = false;
3331     int ret;
3332
3333     if (!bs->drv) {
3334         return -ENOMEDIUM;
3335     }
3336     if (bs->read_only) {
3337         return -EACCES;
3338     }
3339     if (bdrv_check_byte_request(bs, offset, bytes)) {
3340         return -EIO;
3341     }
3342
3343     /* throttling disk I/O */
3344     if (bs->io_limits_enabled) {
3345         bdrv_io_limits_intercept(bs, bytes, true);
3346     }
3347
3348     /*
3349      * Align write if necessary by performing a read-modify-write cycle.
3350      * Pad qiov with the read parts and be sure to have a tracked request not
3351      * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3352      */
3353     tracked_request_begin(&req, bs, offset, bytes, true);
3354
3355     if (offset & (align - 1)) {
3356         QEMUIOVector head_qiov;
3357         struct iovec head_iov;
3358
3359         mark_request_serialising(&req, align);
3360         wait_serialising_requests(&req);
3361
3362         head_buf = qemu_blockalign(bs, align);
3363         head_iov = (struct iovec) {
3364             .iov_base   = head_buf,
3365             .iov_len    = align,
3366         };
3367         qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3368
3369         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3370         ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3371                                   align, &head_qiov, 0);
3372         if (ret < 0) {
3373             goto fail;
3374         }
3375         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3376
3377         qemu_iovec_init(&local_qiov, qiov->niov + 2);
3378         qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3379         qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3380         use_local_qiov = true;
3381
3382         bytes += offset & (align - 1);
3383         offset = offset & ~(align - 1);
3384     }
3385
3386     if ((offset + bytes) & (align - 1)) {
3387         QEMUIOVector tail_qiov;
3388         struct iovec tail_iov;
3389         size_t tail_bytes;
3390         bool waited;
3391
3392         mark_request_serialising(&req, align);
3393         waited = wait_serialising_requests(&req);
3394         assert(!waited || !use_local_qiov);
3395
3396         tail_buf = qemu_blockalign(bs, align);
3397         tail_iov = (struct iovec) {
3398             .iov_base   = tail_buf,
3399             .iov_len    = align,
3400         };
3401         qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3402
3403         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3404         ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3405                                   align, &tail_qiov, 0);
3406         if (ret < 0) {
3407             goto fail;
3408         }
3409         BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3410
3411         if (!use_local_qiov) {
3412             qemu_iovec_init(&local_qiov, qiov->niov + 1);
3413             qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3414             use_local_qiov = true;
3415         }
3416
3417         tail_bytes = (offset + bytes) & (align - 1);
3418         qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3419
3420         bytes = ROUND_UP(bytes, align);
3421     }
3422
3423     ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3424                                use_local_qiov ? &local_qiov : qiov,
3425                                flags);
3426
3427 fail:
3428     tracked_request_end(&req);
3429
3430     if (use_local_qiov) {
3431         qemu_iovec_destroy(&local_qiov);
3432     }
3433     qemu_vfree(head_buf);
3434     qemu_vfree(tail_buf);
3435
3436     return ret;
3437 }
3438
3439 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3440     int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3441     BdrvRequestFlags flags)
3442 {
3443     if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3444         return -EINVAL;
3445     }
3446
3447     return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3448                               nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3449 }
3450
3451 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3452     int nb_sectors, QEMUIOVector *qiov)
3453 {
3454     trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3455
3456     return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3457 }
3458
3459 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3460                                       int64_t sector_num, int nb_sectors,
3461                                       BdrvRequestFlags flags)
3462 {
3463     trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3464
3465     if (!(bs->open_flags & BDRV_O_UNMAP)) {
3466         flags &= ~BDRV_REQ_MAY_UNMAP;
3467     }
3468
3469     return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3470                              BDRV_REQ_ZERO_WRITE | flags);
3471 }
3472
3473 /**
3474  * Truncate file to 'offset' bytes (needed only for file protocols)
3475  */
3476 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3477 {
3478     BlockDriver *drv = bs->drv;
3479     int ret;
3480     if (!drv)
3481         return -ENOMEDIUM;
3482     if (!drv->bdrv_truncate)
3483         return -ENOTSUP;
3484     if (bs->read_only)
3485         return -EACCES;
3486
3487     ret = drv->bdrv_truncate(bs, offset);
3488     if (ret == 0) {
3489         ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3490         bdrv_dev_resize_cb(bs);
3491     }
3492     return ret;
3493 }
3494
3495 /**
3496  * Length of a allocated file in bytes. Sparse files are counted by actual
3497  * allocated space. Return < 0 if error or unknown.
3498  */
3499 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3500 {
3501     BlockDriver *drv = bs->drv;
3502     if (!drv) {
3503         return -ENOMEDIUM;
3504     }
3505     if (drv->bdrv_get_allocated_file_size) {
3506         return drv->bdrv_get_allocated_file_size(bs);
3507     }
3508     if (bs->file) {
3509         return bdrv_get_allocated_file_size(bs->file);
3510     }
3511     return -ENOTSUP;
3512 }
3513
3514 /**
3515  * Length of a file in bytes. Return < 0 if error or unknown.
3516  */
3517 int64_t bdrv_getlength(BlockDriverState *bs)
3518 {
3519     BlockDriver *drv = bs->drv;
3520     if (!drv)
3521         return -ENOMEDIUM;
3522
3523     if (drv->has_variable_length) {
3524         int ret = refresh_total_sectors(bs, bs->total_sectors);
3525         if (ret < 0) {
3526             return ret;
3527         }
3528     }
3529     return bs->total_sectors * BDRV_SECTOR_SIZE;
3530 }
3531
3532 /* return 0 as number of sectors if no device present or error */
3533 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3534 {
3535     int64_t length;
3536     length = bdrv_getlength(bs);
3537     if (length < 0)
3538         length = 0;
3539     else
3540         length = length >> BDRV_SECTOR_BITS;
3541     *nb_sectors_ptr = length;
3542 }
3543
3544 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3545                        BlockdevOnError on_write_error)
3546 {
3547     bs->on_read_error = on_read_error;
3548     bs->on_write_error = on_write_error;
3549 }
3550
3551 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3552 {
3553     return is_read ? bs->on_read_error : bs->on_write_error;
3554 }
3555
3556 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3557 {
3558     BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3559
3560     switch (on_err) {
3561     case BLOCKDEV_ON_ERROR_ENOSPC:
3562         return (error == ENOSPC) ?
3563                BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT;
3564     case BLOCKDEV_ON_ERROR_STOP:
3565         return BLOCK_ERROR_ACTION_STOP;
3566     case BLOCKDEV_ON_ERROR_REPORT:
3567         return BLOCK_ERROR_ACTION_REPORT;
3568     case BLOCKDEV_ON_ERROR_IGNORE:
3569         return BLOCK_ERROR_ACTION_IGNORE;
3570     default:
3571         abort();
3572     }
3573 }
3574
3575 /* This is done by device models because, while the block layer knows
3576  * about the error, it does not know whether an operation comes from
3577  * the device or the block layer (from a job, for example).
3578  */
3579 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3580                        bool is_read, int error)
3581 {
3582     assert(error >= 0);
3583
3584     if (action == BLOCK_ERROR_ACTION_STOP) {
3585         /* First set the iostatus, so that "info block" returns an iostatus
3586          * that matches the events raised so far (an additional error iostatus
3587          * is fine, but not a lost one).
3588          */
3589         bdrv_iostatus_set_err(bs, error);
3590
3591         /* Then raise the request to stop the VM and the event.
3592          * qemu_system_vmstop_request_prepare has two effects.  First,
3593          * it ensures that the STOP event always comes after the
3594          * BLOCK_IO_ERROR event.  Second, it ensures that even if management
3595          * can observe the STOP event and do a "cont" before the STOP
3596          * event is issued, the VM will not stop.  In this case, vm_start()
3597          * also ensures that the STOP/RESUME pair of events is emitted.
3598          */
3599         qemu_system_vmstop_request_prepare();
3600         qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3601                                        is_read ? IO_OPERATION_TYPE_READ :
3602                                        IO_OPERATION_TYPE_WRITE,
3603                                        action, &error_abort);
3604         qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
3605     } else {
3606         qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3607                                        is_read ? IO_OPERATION_TYPE_READ :
3608                                        IO_OPERATION_TYPE_WRITE,
3609                                        action, &error_abort);
3610     }
3611 }
3612
3613 int bdrv_is_read_only(BlockDriverState *bs)
3614 {
3615     return bs->read_only;
3616 }
3617
3618 int bdrv_is_sg(BlockDriverState *bs)
3619 {
3620     return bs->sg;
3621 }
3622
3623 int bdrv_enable_write_cache(BlockDriverState *bs)
3624 {
3625     return bs->enable_write_cache;
3626 }
3627
3628 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3629 {
3630     bs->enable_write_cache = wce;
3631
3632     /* so a reopen() will preserve wce */
3633     if (wce) {
3634         bs->open_flags |= BDRV_O_CACHE_WB;
3635     } else {
3636         bs->open_flags &= ~BDRV_O_CACHE_WB;
3637     }
3638 }
3639
3640 int bdrv_is_encrypted(BlockDriverState *bs)
3641 {
3642     if (bs->backing_hd && bs->backing_hd->encrypted)
3643         return 1;
3644     return bs->encrypted;
3645 }
3646
3647 int bdrv_key_required(BlockDriverState *bs)
3648 {
3649     BlockDriverState *backing_hd = bs->backing_hd;
3650
3651     if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3652         return 1;
3653     return (bs->encrypted && !bs->valid_key);
3654 }
3655
3656 int bdrv_set_key(BlockDriverState *bs, const char *key)
3657 {
3658     int ret;
3659     if (bs->backing_hd && bs->backing_hd->encrypted) {
3660         ret = bdrv_set_key(bs->backing_hd, key);
3661         if (ret < 0)
3662             return ret;
3663         if (!bs->encrypted)
3664             return 0;
3665     }
3666     if (!bs->encrypted) {
3667         return -EINVAL;
3668     } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3669         return -ENOMEDIUM;
3670     }
3671     ret = bs->drv->bdrv_set_key(bs, key);
3672     if (ret < 0) {
3673         bs->valid_key = 0;
3674     } else if (!bs->valid_key) {
3675         bs->valid_key = 1;
3676         /* call the change callback now, we skipped it on open */
3677         bdrv_dev_change_media_cb(bs, true);
3678     }
3679     return ret;
3680 }
3681
3682 const char *bdrv_get_format_name(BlockDriverState *bs)
3683 {
3684     return bs->drv ? bs->drv->format_name : NULL;
3685 }
3686
3687 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3688                          void *opaque)
3689 {
3690     BlockDriver *drv;
3691     int count = 0;
3692     const char **formats = NULL;
3693
3694     QLIST_FOREACH(drv, &bdrv_drivers, list) {
3695         if (drv->format_name) {
3696             bool found = false;
3697             int i = count;
3698             while (formats && i && !found) {
3699                 found = !strcmp(formats[--i], drv->format_name);
3700             }
3701
3702             if (!found) {
3703                 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3704                 formats[count++] = drv->format_name;
3705                 it(opaque, drv->format_name);
3706             }
3707         }
3708     }
3709     g_free(formats);
3710 }
3711
3712 /* This function is to find block backend bs */
3713 BlockDriverState *bdrv_find(const char *name)
3714 {
3715     BlockDriverState *bs;
3716
3717     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3718         if (!strcmp(name, bs->device_name)) {
3719             return bs;
3720         }
3721     }
3722     return NULL;
3723 }
3724
3725 /* This function is to find a node in the bs graph */
3726 BlockDriverState *bdrv_find_node(const char *node_name)
3727 {
3728     BlockDriverState *bs;
3729
3730     assert(node_name);
3731
3732     QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3733         if (!strcmp(node_name, bs->node_name)) {
3734             return bs;
3735         }
3736     }
3737     return NULL;
3738 }
3739
3740 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3741 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3742 {
3743     BlockDeviceInfoList *list, *entry;
3744     BlockDriverState *bs;
3745
3746     list = NULL;
3747     QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3748         entry = g_malloc0(sizeof(*entry));
3749         entry->value = bdrv_block_device_info(bs);
3750         entry->next = list;
3751         list = entry;
3752     }
3753
3754     return list;
3755 }
3756
3757 BlockDriverState *bdrv_lookup_bs(const char *device,
3758                                  const char *node_name,
3759                                  Error **errp)
3760 {
3761     BlockDriverState *bs = NULL;
3762
3763     if (device) {
3764         bs = bdrv_find(device);
3765
3766         if (bs) {
3767             return bs;
3768         }
3769     }
3770
3771     if (node_name) {
3772         bs = bdrv_find_node(node_name);
3773
3774         if (bs) {
3775             return bs;
3776         }
3777     }
3778
3779     error_setg(errp, "Cannot find device=%s nor node_name=%s",
3780                      device ? device : "",
3781                      node_name ? node_name : "");
3782     return NULL;
3783 }
3784
3785 BlockDriverState *bdrv_next(BlockDriverState *bs)
3786 {
3787     if (!bs) {
3788         return QTAILQ_FIRST(&bdrv_states);
3789     }
3790     return QTAILQ_NEXT(bs, device_list);
3791 }
3792
3793 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3794 {
3795     BlockDriverState *bs;
3796
3797     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3798         it(opaque, bs);
3799     }
3800 }
3801
3802 const char *bdrv_get_device_name(BlockDriverState *bs)
3803 {
3804     return bs->device_name;
3805 }
3806
3807 int bdrv_get_flags(BlockDriverState *bs)
3808 {
3809     return bs->open_flags;
3810 }
3811
3812 int bdrv_flush_all(void)
3813 {
3814     BlockDriverState *bs;
3815     int result = 0;
3816
3817     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3818         AioContext *aio_context = bdrv_get_aio_context(bs);
3819         int ret;
3820
3821         aio_context_acquire(aio_context);
3822         ret = bdrv_flush(bs);
3823         if (ret < 0 && !result) {
3824             result = ret;
3825         }
3826         aio_context_release(aio_context);
3827     }
3828
3829     return result;
3830 }
3831
3832 int bdrv_has_zero_init_1(BlockDriverState *bs)
3833 {
3834     return 1;
3835 }
3836
3837 int bdrv_has_zero_init(BlockDriverState *bs)
3838 {
3839     assert(bs->drv);
3840
3841     /* If BS is a copy on write image, it is initialized to
3842        the contents of the base image, which may not be zeroes.  */
3843     if (bs->backing_hd) {
3844         return 0;
3845     }
3846     if (bs->drv->bdrv_has_zero_init) {
3847         return bs->drv->bdrv_has_zero_init(bs);
3848     }
3849
3850     /* safe default */
3851     return 0;
3852 }
3853
3854 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3855 {
3856     BlockDriverInfo bdi;
3857
3858     if (bs->backing_hd) {
3859         return false;
3860     }
3861
3862     if (bdrv_get_info(bs, &bdi) == 0) {
3863         return bdi.unallocated_blocks_are_zero;
3864     }
3865
3866     return false;
3867 }
3868
3869 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3870 {
3871     BlockDriverInfo bdi;
3872
3873     if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3874         return false;
3875     }
3876
3877     if (bdrv_get_info(bs, &bdi) == 0) {
3878         return bdi.can_write_zeroes_with_unmap;
3879     }
3880
3881     return false;
3882 }
3883
3884 typedef struct BdrvCoGetBlockStatusData {
3885     BlockDriverState *bs;
3886     BlockDriverState *base;
3887     int64_t sector_num;
3888     int nb_sectors;
3889     int *pnum;
3890     int64_t ret;
3891     bool done;
3892 } BdrvCoGetBlockStatusData;
3893
3894 /*
3895  * Returns true iff the specified sector is present in the disk image. Drivers
3896  * not implementing the functionality are assumed to not support backing files,
3897  * hence all their sectors are reported as allocated.
3898  *
3899  * If 'sector_num' is beyond the end of the disk image the return value is 0
3900  * and 'pnum' is set to 0.
3901  *
3902  * 'pnum' is set to the number of sectors (including and immediately following
3903  * the specified sector) that are known to be in the same
3904  * allocated/unallocated state.
3905  *
3906  * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors goes
3907  * beyond the end of the disk image it will be clamped.
3908  */
3909 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3910                                                      int64_t sector_num,
3911                                                      int nb_sectors, int *pnum)
3912 {
3913     int64_t length;
3914     int64_t n;
3915     int64_t ret, ret2;
3916
3917     length = bdrv_getlength(bs);
3918     if (length < 0) {
3919         return length;
3920     }
3921
3922     if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3923         *pnum = 0;
3924         return 0;
3925     }
3926
3927     n = bs->total_sectors - sector_num;
3928     if (n < nb_sectors) {
3929         nb_sectors = n;
3930     }
3931
3932     if (!bs->drv->bdrv_co_get_block_status) {
3933         *pnum = nb_sectors;
3934         ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3935         if (bs->drv->protocol_name) {
3936             ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3937         }
3938         return ret;
3939     }
3940
3941     ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3942     if (ret < 0) {
3943         *pnum = 0;
3944         return ret;
3945     }
3946
3947     if (ret & BDRV_BLOCK_RAW) {
3948         assert(ret & BDRV_BLOCK_OFFSET_VALID);
3949         return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3950                                      *pnum, pnum);
3951     }
3952
3953     if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3954         ret |= BDRV_BLOCK_ALLOCATED;
3955     }
3956
3957     if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3958         if (bdrv_unallocated_blocks_are_zero(bs)) {
3959             ret |= BDRV_BLOCK_ZERO;
3960         } else if (bs->backing_hd) {
3961             BlockDriverState *bs2 = bs->backing_hd;
3962             int64_t length2 = bdrv_getlength(bs2);
3963             if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3964                 ret |= BDRV_BLOCK_ZERO;
3965             }
3966         }
3967     }
3968
3969     if (bs->file &&
3970         (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3971         (ret & BDRV_BLOCK_OFFSET_VALID)) {
3972         ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3973                                         *pnum, pnum);
3974         if (ret2 >= 0) {
3975             /* Ignore errors.  This is just providing extra information, it
3976              * is useful but not necessary.
3977              */
3978             ret |= (ret2 & BDRV_BLOCK_ZERO);
3979         }
3980     }
3981
3982     return ret;
3983 }
3984
3985 /* Coroutine wrapper for bdrv_get_block_status() */
3986 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3987 {
3988     BdrvCoGetBlockStatusData *data = opaque;
3989     BlockDriverState *bs = data->bs;
3990
3991     data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3992                                          data->pnum);
3993     data->done = true;
3994 }
3995
3996 /*
3997  * Synchronous wrapper around bdrv_co_get_block_status().
3998  *
3999  * See bdrv_co_get_block_status() for details.
4000  */
4001 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4002                               int nb_sectors, int *pnum)
4003 {
4004     Coroutine *co;
4005     BdrvCoGetBlockStatusData data = {
4006         .bs = bs,
4007         .sector_num = sector_num,
4008         .nb_sectors = nb_sectors,
4009         .pnum = pnum,
4010         .done = false,
4011     };
4012
4013     if (qemu_in_coroutine()) {
4014         /* Fast-path if already in coroutine context */
4015         bdrv_get_block_status_co_entry(&data);
4016     } else {
4017         AioContext *aio_context = bdrv_get_aio_context(bs);
4018
4019         co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4020         qemu_coroutine_enter(co, &data);
4021         while (!data.done) {
4022             aio_poll(aio_context, true);
4023         }
4024     }
4025     return data.ret;
4026 }
4027
4028 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4029                                    int nb_sectors, int *pnum)
4030 {
4031     int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4032     if (ret < 0) {
4033         return ret;
4034     }
4035     return (ret & BDRV_BLOCK_ALLOCATED);
4036 }
4037
4038 /*
4039  * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4040  *
4041  * Return true if the given sector is allocated in any image between
4042  * BASE and TOP (inclusive).  BASE can be NULL to check if the given
4043  * sector is allocated in any image of the chain.  Return false otherwise.
4044  *
4045  * 'pnum' is set to the number of sectors (including and immediately following
4046  *  the specified sector) that are known to be in the same
4047  *  allocated/unallocated state.
4048  *
4049  */
4050 int bdrv_is_allocated_above(BlockDriverState *top,
4051                             BlockDriverState *base,
4052                             int64_t sector_num,
4053                             int nb_sectors, int *pnum)
4054 {
4055     BlockDriverState *intermediate;
4056     int ret, n = nb_sectors;
4057
4058     intermediate = top;
4059     while (intermediate && intermediate != base) {
4060         int pnum_inter;
4061         ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4062                                 &pnum_inter);
4063         if (ret < 0) {
4064             return ret;
4065         } else if (ret) {
4066             *pnum = pnum_inter;
4067             return 1;
4068         }
4069
4070         /*
4071          * [sector_num, nb_sectors] is unallocated on top but intermediate
4072          * might have
4073          *
4074          * [sector_num+x, nr_sectors] allocated.
4075          */
4076         if (n > pnum_inter &&
4077             (intermediate == top ||
4078              sector_num + pnum_inter < intermediate->total_sectors)) {
4079             n = pnum_inter;
4080         }
4081
4082         intermediate = intermediate->backing_hd;
4083     }
4084
4085     *pnum = n;
4086     return 0;
4087 }
4088
4089 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4090 {
4091     if (bs->backing_hd && bs->backing_hd->encrypted)
4092         return bs->backing_file;
4093     else if (bs->encrypted)
4094         return bs->filename;
4095     else
4096         return NULL;
4097 }
4098
4099 void bdrv_get_backing_filename(BlockDriverState *bs,
4100                                char *filename, int filename_size)
4101 {
4102     pstrcpy(filename, filename_size, bs->backing_file);
4103 }
4104
4105 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4106                           const uint8_t *buf, int nb_sectors)
4107 {
4108     BlockDriver *drv = bs->drv;
4109     if (!drv)
4110         return -ENOMEDIUM;
4111     if (!drv->bdrv_write_compressed)
4112         return -ENOTSUP;
4113     if (bdrv_check_request(bs, sector_num, nb_sectors))
4114         return -EIO;
4115
4116     assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4117
4118     return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4119 }
4120
4121 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4122 {
4123     BlockDriver *drv = bs->drv;
4124     if (!drv)
4125         return -ENOMEDIUM;
4126     if (!drv->bdrv_get_info)
4127         return -ENOTSUP;
4128     memset(bdi, 0, sizeof(*bdi));
4129     return drv->bdrv_get_info(bs, bdi);
4130 }
4131
4132 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4133 {
4134     BlockDriver *drv = bs->drv;
4135     if (drv && drv->bdrv_get_specific_info) {
4136         return drv->bdrv_get_specific_info(bs);
4137     }
4138     return NULL;
4139 }
4140
4141 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4142                       int64_t pos, int size)
4143 {
4144     QEMUIOVector qiov;
4145     struct iovec iov = {
4146         .iov_base   = (void *) buf,
4147         .iov_len    = size,
4148     };
4149
4150     qemu_iovec_init_external(&qiov, &iov, 1);
4151     return bdrv_writev_vmstate(bs, &qiov, pos);
4152 }
4153
4154 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4155 {
4156     BlockDriver *drv = bs->drv;
4157
4158     if (!drv) {
4159         return -ENOMEDIUM;
4160     } else if (drv->bdrv_save_vmstate) {
4161         return drv->bdrv_save_vmstate(bs, qiov, pos);
4162     } else if (bs->file) {
4163         return bdrv_writev_vmstate(bs->file, qiov, pos);
4164     }
4165
4166     return -ENOTSUP;
4167 }
4168
4169 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4170                       int64_t pos, int size)
4171 {
4172     BlockDriver *drv = bs->drv;
4173     if (!drv)
4174         return -ENOMEDIUM;
4175     if (drv->bdrv_load_vmstate)
4176         return drv->bdrv_load_vmstate(bs, buf, pos, size);
4177     if (bs->file)
4178         return bdrv_load_vmstate(bs->file, buf, pos, size);
4179     return -ENOTSUP;
4180 }
4181
4182 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4183 {
4184     if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4185         return;
4186     }
4187
4188     bs->drv->bdrv_debug_event(bs, event);
4189 }
4190
4191 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4192                           const char *tag)
4193 {
4194     while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4195         bs = bs->file;
4196     }
4197
4198     if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4199         return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4200     }
4201
4202     return -ENOTSUP;
4203 }
4204
4205 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4206 {
4207     while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4208         bs = bs->file;
4209     }
4210
4211     if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4212         return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4213     }
4214
4215     return -ENOTSUP;
4216 }
4217
4218 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4219 {
4220     while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4221         bs = bs->file;
4222     }
4223
4224     if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4225         return bs->drv->bdrv_debug_resume(bs, tag);
4226     }
4227
4228     return -ENOTSUP;
4229 }
4230
4231 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4232 {
4233     while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4234         bs = bs->file;
4235     }
4236
4237     if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4238         return bs->drv->bdrv_debug_is_suspended(bs, tag);
4239     }
4240
4241     return false;
4242 }
4243
4244 int bdrv_is_snapshot(BlockDriverState *bs)
4245 {
4246     return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4247 }
4248
4249 /* backing_file can either be relative, or absolute, or a protocol.  If it is
4250  * relative, it must be relative to the chain.  So, passing in bs->filename
4251  * from a BDS as backing_file should not be done, as that may be relative to
4252  * the CWD rather than the chain. */
4253 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4254         const char *backing_file)
4255 {
4256     char *filename_full = NULL;
4257     char *backing_file_full = NULL;
4258     char *filename_tmp = NULL;
4259     int is_protocol = 0;
4260     BlockDriverState *curr_bs = NULL;
4261     BlockDriverState *retval = NULL;
4262
4263     if (!bs || !bs->drv || !backing_file) {
4264         return NULL;
4265     }
4266
4267     filename_full     = g_malloc(PATH_MAX);
4268     backing_file_full = g_malloc(PATH_MAX);
4269     filename_tmp      = g_malloc(PATH_MAX);
4270
4271     is_protocol = path_has_protocol(backing_file);
4272
4273     for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4274
4275         /* If either of the filename paths is actually a protocol, then
4276          * compare unmodified paths; otherwise make paths relative */
4277         if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4278             if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4279                 retval = curr_bs->backing_hd;
4280                 break;
4281             }
4282         } else {
4283             /* If not an absolute filename path, make it relative to the current
4284              * image's filename path */
4285             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4286                          backing_file);
4287
4288             /* We are going to compare absolute pathnames */
4289             if (!realpath(filename_tmp, filename_full)) {
4290                 continue;
4291             }
4292
4293             /* We need to make sure the backing filename we are comparing against
4294              * is relative to the current image filename (or absolute) */
4295             path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4296                          curr_bs->backing_file);
4297
4298             if (!realpath(filename_tmp, backing_file_full)) {
4299                 continue;
4300             }
4301
4302             if (strcmp(backing_file_full, filename_full) == 0) {
4303                 retval = curr_bs->backing_hd;
4304                 break;
4305             }
4306         }
4307     }
4308
4309     g_free(filename_full);
4310     g_free(backing_file_full);
4311     g_free(filename_tmp);
4312     return retval;
4313 }
4314
4315 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4316 {
4317     if (!bs->drv) {
4318         return 0;
4319     }
4320
4321     if (!bs->backing_hd) {
4322         return 0;
4323     }
4324
4325     return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4326 }
4327
4328 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4329 {
4330     BlockDriverState *curr_bs = NULL;
4331
4332     if (!bs) {
4333         return NULL;
4334     }
4335
4336     curr_bs = bs;
4337
4338     while (curr_bs->backing_hd) {
4339         curr_bs = curr_bs->backing_hd;
4340     }
4341     return curr_bs;
4342 }
4343
4344 /**************************************************************/
4345 /* async I/Os */
4346
4347 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4348                                  QEMUIOVector *qiov, int nb_sectors,
4349                                  BlockDriverCompletionFunc *cb, void *opaque)
4350 {
4351     trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4352
4353     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4354                                  cb, opaque, false);
4355 }
4356
4357 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4358                                   QEMUIOVector *qiov, int nb_sectors,
4359                                   BlockDriverCompletionFunc *cb, void *opaque)
4360 {
4361     trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4362
4363     return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4364                                  cb, opaque, true);
4365 }
4366
4367 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4368         int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4369         BlockDriverCompletionFunc *cb, void *opaque)
4370 {
4371     trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4372
4373     return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4374                                  BDRV_REQ_ZERO_WRITE | flags,
4375                                  cb, opaque, true);
4376 }
4377
4378
4379 typedef struct MultiwriteCB {
4380     int error;
4381     int num_requests;
4382     int num_callbacks;
4383     struct {
4384         BlockDriverCompletionFunc *cb;
4385         void *opaque;
4386         QEMUIOVector *free_qiov;
4387     } callbacks[];
4388 } MultiwriteCB;
4389
4390 static void multiwrite_user_cb(MultiwriteCB *mcb)
4391 {
4392     int i;
4393
4394     for (i = 0; i < mcb->num_callbacks; i++) {
4395         mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4396         if (mcb->callbacks[i].free_qiov) {
4397             qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4398         }
4399         g_free(mcb->callbacks[i].free_qiov);
4400     }
4401 }
4402
4403 static void multiwrite_cb(void *opaque, int ret)
4404 {
4405     MultiwriteCB *mcb = opaque;
4406
4407     trace_multiwrite_cb(mcb, ret);
4408
4409     if (ret < 0 && !mcb->error) {
4410         mcb->error = ret;
4411     }
4412
4413     mcb->num_requests--;
4414     if (mcb->num_requests == 0) {
4415         multiwrite_user_cb(mcb);
4416         g_free(mcb);
4417     }
4418 }
4419
4420 static int multiwrite_req_compare(const void *a, const void *b)
4421 {
4422     const BlockRequest *req1 = a, *req2 = b;
4423
4424     /*
4425      * Note that we can't simply subtract req2->sector from req1->sector
4426      * here as that could overflow the return value.
4427      */
4428     if (req1->sector > req2->sector) {
4429         return 1;
4430     } else if (req1->sector < req2->sector) {
4431         return -1;
4432     } else {
4433         return 0;
4434     }
4435 }
4436
4437 /*
4438  * Takes a bunch of requests and tries to merge them. Returns the number of
4439  * requests that remain after merging.
4440  */
4441 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4442     int num_reqs, MultiwriteCB *mcb)
4443 {
4444     int i, outidx;
4445
4446     // Sort requests by start sector
4447     qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4448
4449     // Check if adjacent requests touch the same clusters. If so, combine them,
4450     // filling up gaps with zero sectors.
4451     outidx = 0;
4452     for (i = 1; i < num_reqs; i++) {
4453         int merge = 0;
4454         int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4455
4456         // Handle exactly sequential writes and overlapping writes.
4457         if (reqs[i].sector <= oldreq_last) {
4458             merge = 1;
4459         }
4460
4461         if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4462             merge = 0;
4463         }
4464
4465         if (merge) {
4466             size_t size;
4467             QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4468             qemu_iovec_init(qiov,
4469                 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4470
4471             // Add the first request to the merged one. If the requests are
4472             // overlapping, drop the last sectors of the first request.
4473             size = (reqs[i].sector - reqs[outidx].sector) << 9;
4474             qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4475
4476             // We should need to add any zeros between the two requests
4477             assert (reqs[i].sector <= oldreq_last);
4478
4479             // Add the second request
4480             qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4481
4482             reqs[outidx].nb_sectors = qiov->size >> 9;
4483             reqs[outidx].qiov = qiov;
4484
4485             mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4486         } else {
4487             outidx++;
4488             reqs[outidx].sector     = reqs[i].sector;
4489             reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4490             reqs[outidx].qiov       = reqs[i].qiov;
4491         }
4492     }
4493
4494     return outidx + 1;
4495 }
4496
4497 /*
4498  * Submit multiple AIO write requests at once.
4499  *
4500  * On success, the function returns 0 and all requests in the reqs array have
4501  * been submitted. In error case this function returns -1, and any of the
4502  * requests may or may not be submitted yet. In particular, this means that the
4503  * callback will be called for some of the requests, for others it won't. The
4504  * caller must check the error field of the BlockRequest to wait for the right
4505  * callbacks (if error != 0, no callback will be called).
4506  *
4507  * The implementation may modify the contents of the reqs array, e.g. to merge
4508  * requests. However, the fields opaque and error are left unmodified as they
4509  * are used to signal failure for a single request to the caller.
4510  */
4511 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4512 {
4513     MultiwriteCB *mcb;
4514     int i;
4515
4516     /* don't submit writes if we don't have a medium */
4517     if (bs->drv == NULL) {
4518         for (i = 0; i < num_reqs; i++) {
4519             reqs[i].error = -ENOMEDIUM;
4520         }
4521         return -1;
4522     }
4523
4524     if (num_reqs == 0) {
4525         return 0;
4526     }
4527
4528     // Create MultiwriteCB structure
4529     mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4530     mcb->num_requests = 0;
4531     mcb->num_callbacks = num_reqs;
4532
4533     for (i = 0; i < num_reqs; i++) {
4534         mcb->callbacks[i].cb = reqs[i].cb;
4535         mcb->callbacks[i].opaque = reqs[i].opaque;
4536     }
4537
4538     // Check for mergable requests
4539     num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4540
4541     trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4542
4543     /* Run the aio requests. */
4544     mcb->num_requests = num_reqs;
4545     for (i = 0; i < num_reqs; i++) {
4546         bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4547                               reqs[i].nb_sectors, reqs[i].flags,
4548                               multiwrite_cb, mcb,
4549                               true);
4550     }
4551
4552     return 0;
4553 }
4554
4555 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4556 {
4557     acb->aiocb_info->cancel(acb);
4558 }
4559
4560 /**************************************************************/
4561 /* async block device emulation */
4562
4563 typedef struct BlockDriverAIOCBSync {
4564     BlockDriverAIOCB common;
4565     QEMUBH *bh;
4566     int ret;
4567     /* vector translation state */
4568     QEMUIOVector *qiov;
4569     uint8_t *bounce;
4570     int is_write;
4571 } BlockDriverAIOCBSync;
4572
4573 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4574 {
4575     BlockDriverAIOCBSync *acb =
4576         container_of(blockacb, BlockDriverAIOCBSync, common);
4577     qemu_bh_delete(acb->bh);
4578     acb->bh = NULL;
4579     qemu_aio_release(acb);
4580 }
4581
4582 static const AIOCBInfo bdrv_em_aiocb_info = {
4583     .aiocb_size         = sizeof(BlockDriverAIOCBSync),
4584     .cancel             = bdrv_aio_cancel_em,
4585 };
4586
4587 static void bdrv_aio_bh_cb(void *opaque)
4588 {
4589     BlockDriverAIOCBSync *acb = opaque;
4590
4591     if (!acb->is_write)
4592         qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4593     qemu_vfree(acb->bounce);
4594     acb->common.cb(acb->common.opaque, acb->ret);
4595     qemu_bh_delete(acb->bh);
4596     acb->bh = NULL;
4597     qemu_aio_release(acb);
4598 }
4599
4600 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4601                                             int64_t sector_num,
4602                                             QEMUIOVector *qiov,
4603                                             int nb_sectors,
4604                                             BlockDriverCompletionFunc *cb,
4605                                             void *opaque,
4606                                             int is_write)
4607
4608 {
4609     BlockDriverAIOCBSync *acb;
4610
4611     acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4612     acb->is_write = is_write;
4613     acb->qiov = qiov;
4614     acb->bounce = qemu_blockalign(bs, qiov->size);
4615     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
4616
4617     if (is_write) {
4618         qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4619         acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4620     } else {
4621         acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4622     }
4623
4624     qemu_bh_schedule(acb->bh);
4625
4626     return &acb->common;
4627 }
4628
4629 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4630         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4631         BlockDriverCompletionFunc *cb, void *opaque)
4632 {
4633     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4634 }
4635
4636 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4637         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4638         BlockDriverCompletionFunc *cb, void *opaque)
4639 {
4640     return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4641 }
4642
4643
4644 typedef struct BlockDriverAIOCBCoroutine {
4645     BlockDriverAIOCB common;
4646     BlockRequest req;
4647     bool is_write;
4648     bool *done;
4649     QEMUBH* bh;
4650 } BlockDriverAIOCBCoroutine;
4651
4652 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4653 {
4654     AioContext *aio_context = bdrv_get_aio_context(blockacb->bs);
4655     BlockDriverAIOCBCoroutine *acb =
4656         container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4657     bool done = false;
4658
4659     acb->done = &done;
4660     while (!done) {
4661         aio_poll(aio_context, true);
4662     }
4663 }
4664
4665 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4666     .aiocb_size         = sizeof(BlockDriverAIOCBCoroutine),
4667     .cancel             = bdrv_aio_co_cancel_em,
4668 };
4669
4670 static void bdrv_co_em_bh(void *opaque)
4671 {
4672     BlockDriverAIOCBCoroutine *acb = opaque;
4673
4674     acb->common.cb(acb->common.opaque, acb->req.error);
4675
4676     if (acb->done) {
4677         *acb->done = true;
4678     }
4679
4680     qemu_bh_delete(acb->bh);
4681     qemu_aio_release(acb);
4682 }
4683
4684 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4685 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4686 {
4687     BlockDriverAIOCBCoroutine *acb = opaque;
4688     BlockDriverState *bs = acb->common.bs;
4689
4690     if (!acb->is_write) {
4691         acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4692             acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4693     } else {
4694         acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4695             acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4696     }
4697
4698     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4699     qemu_bh_schedule(acb->bh);
4700 }
4701
4702 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4703                                                int64_t sector_num,
4704                                                QEMUIOVector *qiov,
4705                                                int nb_sectors,
4706                                                BdrvRequestFlags flags,
4707                                                BlockDriverCompletionFunc *cb,
4708                                                void *opaque,
4709                                                bool is_write)
4710 {
4711     Coroutine *co;
4712     BlockDriverAIOCBCoroutine *acb;
4713
4714     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4715     acb->req.sector = sector_num;
4716     acb->req.nb_sectors = nb_sectors;
4717     acb->req.qiov = qiov;
4718     acb->req.flags = flags;
4719     acb->is_write = is_write;
4720     acb->done = NULL;
4721
4722     co = qemu_coroutine_create(bdrv_co_do_rw);
4723     qemu_coroutine_enter(co, acb);
4724
4725     return &acb->common;
4726 }
4727
4728 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4729 {
4730     BlockDriverAIOCBCoroutine *acb = opaque;
4731     BlockDriverState *bs = acb->common.bs;
4732
4733     acb->req.error = bdrv_co_flush(bs);
4734     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4735     qemu_bh_schedule(acb->bh);
4736 }
4737
4738 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4739         BlockDriverCompletionFunc *cb, void *opaque)
4740 {
4741     trace_bdrv_aio_flush(bs, opaque);
4742
4743     Coroutine *co;
4744     BlockDriverAIOCBCoroutine *acb;
4745
4746     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4747     acb->done = NULL;
4748
4749     co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4750     qemu_coroutine_enter(co, acb);
4751
4752     return &acb->common;
4753 }
4754
4755 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4756 {
4757     BlockDriverAIOCBCoroutine *acb = opaque;
4758     BlockDriverState *bs = acb->common.bs;
4759
4760     acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4761     acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4762     qemu_bh_schedule(acb->bh);
4763 }
4764
4765 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4766         int64_t sector_num, int nb_sectors,
4767         BlockDriverCompletionFunc *cb, void *opaque)
4768 {
4769     Coroutine *co;
4770     BlockDriverAIOCBCoroutine *acb;
4771
4772     trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4773
4774     acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4775     acb->req.sector = sector_num;
4776     acb->req.nb_sectors = nb_sectors;
4777     acb->done = NULL;
4778     co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4779     qemu_coroutine_enter(co, acb);
4780
4781     return &acb->common;
4782 }
4783
4784 void bdrv_init(void)
4785 {
4786     module_call_init(MODULE_INIT_BLOCK);
4787 }
4788
4789 void bdrv_init_with_whitelist(void)
4790 {
4791     use_bdrv_whitelist = 1;
4792     bdrv_init();
4793 }
4794
4795 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4796                    BlockDriverCompletionFunc *cb, void *opaque)
4797 {
4798     BlockDriverAIOCB *acb;
4799
4800     acb = g_slice_alloc(aiocb_info->aiocb_size);
4801     acb->aiocb_info = aiocb_info;
4802     acb->bs = bs;
4803     acb->cb = cb;
4804     acb->opaque = opaque;
4805     return acb;
4806 }
4807
4808 void qemu_aio_release(void *p)
4809 {
4810     BlockDriverAIOCB *acb = p;
4811     g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4812 }
4813
4814 /**************************************************************/
4815 /* Coroutine block device emulation */
4816
4817 typedef struct CoroutineIOCompletion {
4818     Coroutine *coroutine;
4819     int ret;
4820 } CoroutineIOCompletion;
4821
4822 static void bdrv_co_io_em_complete(void *opaque, int ret)
4823 {
4824     CoroutineIOCompletion *co = opaque;
4825
4826     co->ret = ret;
4827     qemu_coroutine_enter(co->coroutine, NULL);
4828 }
4829
4830 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4831                                       int nb_sectors, QEMUIOVector *iov,
4832                                       bool is_write)
4833 {
4834     CoroutineIOCompletion co = {
4835         .coroutine = qemu_coroutine_self(),
4836     };
4837     BlockDriverAIOCB *acb;
4838
4839     if (is_write) {
4840         acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4841                                        bdrv_co_io_em_complete, &co);
4842     } else {
4843         acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4844                                       bdrv_co_io_em_complete, &co);
4845     }
4846
4847     trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4848     if (!acb) {
4849         return -EIO;
4850     }
4851     qemu_coroutine_yield();
4852
4853     return co.ret;
4854 }
4855
4856 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4857                                          int64_t sector_num, int nb_sectors,
4858                                          QEMUIOVector *iov)
4859 {
4860     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4861 }
4862
4863 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4864                                          int64_t sector_num, int nb_sectors,
4865                                          QEMUIOVector *iov)
4866 {
4867     return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4868 }
4869
4870 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4871 {
4872     RwCo *rwco = opaque;
4873
4874     rwco->ret = bdrv_co_flush(rwco->bs);
4875 }
4876
4877 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4878 {
4879     int ret;
4880
4881     if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4882         return 0;
4883     }
4884
4885     /* Write back cached data to the OS even with cache=unsafe */
4886     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4887     if (bs->drv->bdrv_co_flush_to_os) {
4888         ret = bs->drv->bdrv_co_flush_to_os(bs);
4889         if (ret < 0) {
4890             return ret;
4891         }
4892     }
4893
4894     /* But don't actually force it to the disk with cache=unsafe */
4895     if (bs->open_flags & BDRV_O_NO_FLUSH) {
4896         goto flush_parent;
4897     }
4898
4899     BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4900     if (bs->drv->bdrv_co_flush_to_disk) {
4901         ret = bs->drv->bdrv_co_flush_to_disk(bs);
4902     } else if (bs->drv->bdrv_aio_flush) {
4903         BlockDriverAIOCB *acb;
4904         CoroutineIOCompletion co = {
4905             .coroutine = qemu_coroutine_self(),
4906         };
4907
4908         acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4909         if (acb == NULL) {
4910             ret = -EIO;
4911         } else {
4912             qemu_coroutine_yield();
4913             ret = co.ret;
4914         }
4915     } else {
4916         /*
4917          * Some block drivers always operate in either writethrough or unsafe
4918          * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4919          * know how the server works (because the behaviour is hardcoded or
4920          * depends on server-side configuration), so we can't ensure that
4921          * everything is safe on disk. Returning an error doesn't work because
4922          * that would break guests even if the server operates in writethrough
4923          * mode.
4924          *
4925          * Let's hope the user knows what he's doing.
4926          */
4927         ret = 0;
4928     }
4929     if (ret < 0) {
4930         return ret;
4931     }
4932
4933     /* Now flush the underlying protocol.  It will also have BDRV_O_NO_FLUSH
4934      * in the case of cache=unsafe, so there are no useless flushes.
4935      */
4936 flush_parent:
4937     return bdrv_co_flush(bs->file);
4938 }
4939
4940 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4941 {
4942     Error *local_err = NULL;
4943     int ret;
4944
4945     if (!bs->drv)  {
4946         return;
4947     }
4948
4949     if (bs->drv->bdrv_invalidate_cache) {
4950         bs->drv->bdrv_invalidate_cache(bs, &local_err);
4951     } else if (bs->file) {
4952         bdrv_invalidate_cache(bs->file, &local_err);
4953     }
4954     if (local_err) {
4955         error_propagate(errp, local_err);
4956         return;
4957     }
4958
4959     ret = refresh_total_sectors(bs, bs->total_sectors);
4960     if (ret < 0) {
4961         error_setg_errno(errp, -ret, "Could not refresh total sector count");
4962         return;
4963     }
4964 }
4965
4966 void bdrv_invalidate_cache_all(Error **errp)
4967 {
4968     BlockDriverState *bs;
4969     Error *local_err = NULL;
4970
4971     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4972         AioContext *aio_context = bdrv_get_aio_context(bs);
4973
4974         aio_context_acquire(aio_context);
4975         bdrv_invalidate_cache(bs, &local_err);
4976         aio_context_release(aio_context);
4977         if (local_err) {
4978             error_propagate(errp, local_err);
4979             return;
4980         }
4981     }
4982 }
4983
4984 void bdrv_clear_incoming_migration_all(void)
4985 {
4986     BlockDriverState *bs;
4987
4988     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4989         AioContext *aio_context = bdrv_get_aio_context(bs);
4990
4991         aio_context_acquire(aio_context);
4992         bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4993         aio_context_release(aio_context);
4994     }
4995 }
4996
4997 int bdrv_flush(BlockDriverState *bs)
4998 {
4999     Coroutine *co;
5000     RwCo rwco = {
5001         .bs = bs,
5002         .ret = NOT_DONE,
5003     };
5004
5005     if (qemu_in_coroutine()) {
5006         /* Fast-path if already in coroutine context */
5007         bdrv_flush_co_entry(&rwco);
5008     } else {
5009         AioContext *aio_context = bdrv_get_aio_context(bs);
5010
5011         co = qemu_coroutine_create(bdrv_flush_co_entry);
5012         qemu_coroutine_enter(co, &rwco);
5013         while (rwco.ret == NOT_DONE) {
5014             aio_poll(aio_context, true);
5015         }
5016     }
5017
5018     return rwco.ret;
5019 }
5020
5021 typedef struct DiscardCo {
5022     BlockDriverState *bs;
5023     int64_t sector_num;
5024     int nb_sectors;
5025     int ret;
5026 } DiscardCo;
5027 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5028 {
5029     DiscardCo *rwco = opaque;
5030
5031     rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5032 }
5033
5034 /* if no limit is specified in the BlockLimits use a default
5035  * of 32768 512-byte sectors (16 MiB) per request.
5036  */
5037 #define MAX_DISCARD_DEFAULT 32768
5038
5039 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5040                                  int nb_sectors)
5041 {
5042     int max_discard;
5043
5044     if (!bs->drv) {
5045         return -ENOMEDIUM;
5046     } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5047         return -EIO;
5048     } else if (bs->read_only) {
5049         return -EROFS;
5050     }
5051
5052     bdrv_reset_dirty(bs, sector_num, nb_sectors);
5053
5054     /* Do nothing if disabled.  */
5055     if (!(bs->open_flags & BDRV_O_UNMAP)) {
5056         return 0;
5057     }
5058
5059     if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5060         return 0;
5061     }
5062
5063     max_discard = bs->bl.max_discard ?  bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5064     while (nb_sectors > 0) {
5065         int ret;
5066         int num = nb_sectors;
5067
5068         /* align request */
5069         if (bs->bl.discard_alignment &&
5070             num >= bs->bl.discard_alignment &&
5071             sector_num % bs->bl.discard_alignment) {
5072             if (num > bs->bl.discard_alignment) {
5073                 num = bs->bl.discard_alignment;
5074             }
5075             num -= sector_num % bs->bl.discard_alignment;
5076         }
5077
5078         /* limit request size */
5079         if (num > max_discard) {
5080             num = max_discard;
5081         }
5082
5083         if (bs->drv->bdrv_co_discard) {
5084             ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5085         } else {
5086             BlockDriverAIOCB *acb;
5087             CoroutineIOCompletion co = {
5088                 .coroutine = qemu_coroutine_self(),
5089             };
5090
5091             acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5092                                             bdrv_co_io_em_complete, &co);
5093             if (acb == NULL) {
5094                 return -EIO;
5095             } else {
5096                 qemu_coroutine_yield();
5097                 ret = co.ret;
5098             }
5099         }
5100         if (ret && ret != -ENOTSUP) {
5101             return ret;
5102         }
5103
5104         sector_num += num;
5105         nb_sectors -= num;
5106     }
5107     return 0;
5108 }
5109
5110 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5111 {
5112     Coroutine *co;
5113     DiscardCo rwco = {
5114         .bs = bs,
5115         .sector_num = sector_num,
5116         .nb_sectors = nb_sectors,
5117         .ret = NOT_DONE,
5118     };
5119
5120     if (qemu_in_coroutine()) {
5121         /* Fast-path if already in coroutine context */
5122         bdrv_discard_co_entry(&rwco);
5123     } else {
5124         AioContext *aio_context = bdrv_get_aio_context(bs);
5125
5126         co = qemu_coroutine_create(bdrv_discard_co_entry);
5127         qemu_coroutine_enter(co, &rwco);
5128         while (rwco.ret == NOT_DONE) {
5129             aio_poll(aio_context, true);
5130         }
5131     }
5132
5133     return rwco.ret;
5134 }
5135
5136 /**************************************************************/
5137 /* removable device support */
5138
5139 /**
5140  * Return TRUE if the media is present
5141  */
5142 int bdrv_is_inserted(BlockDriverState *bs)
5143 {
5144     BlockDriver *drv = bs->drv;
5145
5146     if (!drv)
5147         return 0;
5148     if (!drv->bdrv_is_inserted)
5149         return 1;
5150     return drv->bdrv_is_inserted(bs);
5151 }
5152
5153 /**
5154  * Return whether the media changed since the last call to this
5155  * function, or -ENOTSUP if we don't know.  Most drivers don't know.
5156  */
5157 int bdrv_media_changed(BlockDriverState *bs)
5158 {
5159     BlockDriver *drv = bs->drv;
5160
5161     if (drv && drv->bdrv_media_changed) {
5162         return drv->bdrv_media_changed(bs);
5163     }
5164     return -ENOTSUP;
5165 }
5166
5167 /**
5168  * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5169  */
5170 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5171 {
5172     BlockDriver *drv = bs->drv;
5173
5174     if (drv && drv->bdrv_eject) {
5175         drv->bdrv_eject(bs, eject_flag);
5176     }
5177
5178     if (bs->device_name[0] != '\0') {
5179         qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
5180                                           eject_flag, &error_abort);
5181     }
5182 }
5183
5184 /**
5185  * Lock or unlock the media (if it is locked, the user won't be able
5186  * to eject it manually).
5187  */
5188 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5189 {
5190     BlockDriver *drv = bs->drv;
5191
5192     trace_bdrv_lock_medium(bs, locked);
5193
5194     if (drv && drv->bdrv_lock_medium) {
5195         drv->bdrv_lock_medium(bs, locked);
5196     }
5197 }
5198
5199 /* needed for generic scsi interface */
5200
5201 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5202 {
5203     BlockDriver *drv = bs->drv;
5204
5205     if (drv && drv->bdrv_ioctl)
5206         return drv->bdrv_ioctl(bs, req, buf);
5207     return -ENOTSUP;
5208 }
5209
5210 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5211         unsigned long int req, void *buf,
5212         BlockDriverCompletionFunc *cb, void *opaque)
5213 {
5214     BlockDriver *drv = bs->drv;
5215
5216     if (drv && drv->bdrv_aio_ioctl)
5217         return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5218     return NULL;
5219 }
5220
5221 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5222 {
5223     bs->guest_block_size = align;
5224 }
5225
5226 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5227 {
5228     return qemu_memalign(bdrv_opt_mem_align(bs), size);
5229 }
5230
5231 /*
5232  * Check if all memory in this vector is sector aligned.
5233  */
5234 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5235 {
5236     int i;
5237     size_t alignment = bdrv_opt_mem_align(bs);
5238
5239     for (i = 0; i < qiov->niov; i++) {
5240         if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5241             return false;
5242         }
5243         if (qiov->iov[i].iov_len % alignment) {
5244             return false;
5245         }
5246     }
5247
5248     return true;
5249 }
5250
5251 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5252                                           Error **errp)
5253 {
5254     int64_t bitmap_size;
5255     BdrvDirtyBitmap *bitmap;
5256
5257     assert((granularity & (granularity - 1)) == 0);
5258
5259     granularity >>= BDRV_SECTOR_BITS;
5260     assert(granularity);
5261     bitmap_size = bdrv_getlength(bs);
5262     if (bitmap_size < 0) {
5263         error_setg_errno(errp, -bitmap_size, "could not get length of device");
5264         errno = -bitmap_size;
5265         return NULL;
5266     }
5267     bitmap_size >>= BDRV_SECTOR_BITS;
5268     bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5269     bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5270     QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5271     return bitmap;
5272 }
5273
5274 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5275 {
5276     BdrvDirtyBitmap *bm, *next;
5277     QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5278         if (bm == bitmap) {
5279             QLIST_REMOVE(bitmap, list);
5280             hbitmap_free(bitmap->bitmap);
5281             g_free(bitmap);
5282             return;
5283         }
5284     }
5285 }
5286
5287 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5288 {
5289     BdrvDirtyBitmap *bm;
5290     BlockDirtyInfoList *list = NULL;
5291     BlockDirtyInfoList **plist = &list;
5292
5293     QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5294         BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5295         BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5296         info->count = bdrv_get_dirty_count(bs, bm);
5297         info->granularity =
5298             ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5299         entry->value = info;
5300         *plist = entry;
5301         plist = &entry->next;
5302     }
5303
5304     return list;
5305 }
5306
5307 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5308 {
5309     if (bitmap) {
5310         return hbitmap_get(bitmap->bitmap, sector);
5311     } else {
5312         return 0;
5313     }
5314 }
5315
5316 void bdrv_dirty_iter_init(BlockDriverState *bs,
5317                           BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5318 {
5319     hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5320 }
5321
5322 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5323                     int nr_sectors)
5324 {
5325     BdrvDirtyBitmap *bitmap;
5326     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5327         hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5328     }
5329 }
5330
5331 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5332 {
5333     BdrvDirtyBitmap *bitmap;
5334     QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5335         hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5336     }
5337 }
5338
5339 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5340 {
5341     return hbitmap_count(bitmap->bitmap);
5342 }
5343
5344 /* Get a reference to bs */
5345 void bdrv_ref(BlockDriverState *bs)
5346 {
5347     bs->refcnt++;
5348 }
5349
5350 /* Release a previously grabbed reference to bs.
5351  * If after releasing, reference count is zero, the BlockDriverState is
5352  * deleted. */
5353 void bdrv_unref(BlockDriverState *bs)
5354 {
5355     assert(bs->refcnt > 0);
5356     if (--bs->refcnt == 0) {
5357         bdrv_delete(bs);
5358     }
5359 }
5360
5361 struct BdrvOpBlocker {
5362     Error *reason;
5363     QLIST_ENTRY(BdrvOpBlocker) list;
5364 };
5365
5366 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5367 {
5368     BdrvOpBlocker *blocker;
5369     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5370     if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5371         blocker = QLIST_FIRST(&bs->op_blockers[op]);
5372         if (errp) {
5373             error_setg(errp, "Device '%s' is busy: %s",
5374                        bs->device_name, error_get_pretty(blocker->reason));
5375         }
5376         return true;
5377     }
5378     return false;
5379 }
5380
5381 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5382 {
5383     BdrvOpBlocker *blocker;
5384     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5385
5386     blocker = g_malloc0(sizeof(BdrvOpBlocker));
5387     blocker->reason = reason;
5388     QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5389 }
5390
5391 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5392 {
5393     BdrvOpBlocker *blocker, *next;
5394     assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5395     QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5396         if (blocker->reason == reason) {
5397             QLIST_REMOVE(blocker, list);
5398             g_free(blocker);
5399         }
5400     }
5401 }
5402
5403 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5404 {
5405     int i;
5406     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5407         bdrv_op_block(bs, i, reason);
5408     }
5409 }
5410
5411 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5412 {
5413     int i;
5414     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5415         bdrv_op_unblock(bs, i, reason);
5416     }
5417 }
5418
5419 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5420 {
5421     int i;
5422
5423     for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5424         if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5425             return false;
5426         }
5427     }
5428     return true;
5429 }
5430
5431 void bdrv_iostatus_enable(BlockDriverState *bs)
5432 {
5433     bs->iostatus_enabled = true;
5434     bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5435 }
5436
5437 /* The I/O status is only enabled if the drive explicitly
5438  * enables it _and_ the VM is configured to stop on errors */
5439 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5440 {
5441     return (bs->iostatus_enabled &&
5442            (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5443             bs->on_write_error == BLOCKDEV_ON_ERROR_STOP   ||
5444             bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5445 }
5446
5447 void bdrv_iostatus_disable(BlockDriverState *bs)
5448 {
5449     bs->iostatus_enabled = false;
5450 }
5451
5452 void bdrv_iostatus_reset(BlockDriverState *bs)
5453 {
5454     if (bdrv_iostatus_is_enabled(bs)) {
5455         bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5456         if (bs->job) {
5457             block_job_iostatus_reset(bs->job);
5458         }
5459     }
5460 }
5461
5462 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5463 {
5464     assert(bdrv_iostatus_is_enabled(bs));
5465     if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5466         bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5467                                          BLOCK_DEVICE_IO_STATUS_FAILED;
5468     }
5469 }
5470
5471 void
5472 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5473         enum BlockAcctType type)
5474 {
5475     assert(type < BDRV_MAX_IOTYPE);
5476
5477     cookie->bytes = bytes;
5478     cookie->start_time_ns = get_clock();
5479     cookie->type = type;
5480 }
5481
5482 void
5483 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5484 {
5485     assert(cookie->type < BDRV_MAX_IOTYPE);
5486
5487     bs->nr_bytes[cookie->type] += cookie->bytes;
5488     bs->nr_ops[cookie->type]++;
5489     bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5490 }
5491
5492 void bdrv_img_create(const char *filename, const char *fmt,
5493                      const char *base_filename, const char *base_fmt,
5494                      char *options, uint64_t img_size, int flags,
5495                      Error **errp, bool quiet)
5496 {
5497     QemuOptsList *create_opts = NULL;
5498     QemuOpts *opts = NULL;
5499     const char *backing_fmt, *backing_file;
5500     int64_t size;
5501     BlockDriver *drv, *proto_drv;
5502     BlockDriver *backing_drv = NULL;
5503     Error *local_err = NULL;
5504     int ret = 0;
5505
5506     /* Find driver and parse its options */
5507     drv = bdrv_find_format(fmt);
5508     if (!drv) {
5509         error_setg(errp, "Unknown file format '%s'", fmt);
5510         return;
5511     }
5512
5513     proto_drv = bdrv_find_protocol(filename, true);
5514     if (!proto_drv) {
5515         error_setg(errp, "Unknown protocol '%s'", filename);
5516         return;
5517     }
5518
5519     create_opts = qemu_opts_append(create_opts, drv->create_opts);
5520     create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
5521
5522     /* Create parameter list with default values */
5523     opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
5524     qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size);
5525
5526     /* Parse -o options */
5527     if (options) {
5528         if (qemu_opts_do_parse(opts, options, NULL) != 0) {
5529             error_setg(errp, "Invalid options for file format '%s'", fmt);
5530             goto out;
5531         }
5532     }
5533
5534     if (base_filename) {
5535         if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) {
5536             error_setg(errp, "Backing file not supported for file format '%s'",
5537                        fmt);
5538             goto out;
5539         }
5540     }
5541
5542     if (base_fmt) {
5543         if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5544             error_setg(errp, "Backing file format not supported for file "
5545                              "format '%s'", fmt);
5546             goto out;
5547         }
5548     }
5549
5550     backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
5551     if (backing_file) {
5552         if (!strcmp(filename, backing_file)) {
5553             error_setg(errp, "Error: Trying to create an image with the "
5554                              "same filename as the backing file");
5555             goto out;
5556         }
5557     }
5558
5559     backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
5560     if (backing_fmt) {
5561         backing_drv = bdrv_find_format(backing_fmt);
5562         if (!backing_drv) {
5563             error_setg(errp, "Unknown backing file format '%s'",
5564                        backing_fmt);
5565             goto out;
5566         }
5567     }
5568
5569     // The size for the image must always be specified, with one exception:
5570     // If we are using a backing file, we can obtain the size from there
5571     size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
5572     if (size == -1) {
5573         if (backing_file) {
5574             BlockDriverState *bs;
5575             uint64_t size;
5576             int back_flags;
5577
5578             /* backing files always opened read-only */
5579             back_flags =
5580                 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5581
5582             bs = NULL;
5583             ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags,
5584                             backing_drv, &local_err);
5585             if (ret < 0) {
5586                 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5587                                  backing_file,
5588                                  error_get_pretty(local_err));
5589                 error_free(local_err);
5590                 local_err = NULL;
5591                 goto out;
5592             }
5593             bdrv_get_geometry(bs, &size);
5594             size *= 512;
5595
5596             qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size);
5597
5598             bdrv_unref(bs);
5599         } else {
5600             error_setg(errp, "Image creation needs a size parameter");
5601             goto out;
5602         }
5603     }
5604
5605     if (!quiet) {
5606         printf("Formatting '%s', fmt=%s ", filename, fmt);
5607         qemu_opts_print(opts);
5608         puts("");
5609     }
5610
5611     ret = bdrv_create(drv, filename, opts, &local_err);
5612
5613     if (ret == -EFBIG) {
5614         /* This is generally a better message than whatever the driver would
5615          * deliver (especially because of the cluster_size_hint), since that
5616          * is most probably not much different from "image too large". */
5617         const char *cluster_size_hint = "";
5618         if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) {
5619             cluster_size_hint = " (try using a larger cluster size)";
5620         }
5621         error_setg(errp, "The image size is too large for file format '%s'"
5622                    "%s", fmt, cluster_size_hint);
5623         error_free(local_err);
5624         local_err = NULL;
5625     }
5626
5627 out:
5628     qemu_opts_del(opts);
5629     qemu_opts_free(create_opts);
5630     if (local_err) {
5631         error_propagate(errp, local_err);
5632     }
5633 }
5634
5635 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5636 {
5637     return bs->aio_context;
5638 }
5639
5640 void bdrv_detach_aio_context(BlockDriverState *bs)
5641 {
5642     if (!bs->drv) {
5643         return;
5644     }
5645
5646     if (bs->io_limits_enabled) {
5647         throttle_detach_aio_context(&bs->throttle_state);
5648     }
5649     if (bs->drv->bdrv_detach_aio_context) {
5650         bs->drv->bdrv_detach_aio_context(bs);
5651     }
5652     if (bs->file) {
5653         bdrv_detach_aio_context(bs->file);
5654     }
5655     if (bs->backing_hd) {
5656         bdrv_detach_aio_context(bs->backing_hd);
5657     }
5658
5659     bs->aio_context = NULL;
5660 }
5661
5662 void bdrv_attach_aio_context(BlockDriverState *bs,
5663                              AioContext *new_context)
5664 {
5665     if (!bs->drv) {
5666         return;
5667     }
5668
5669     bs->aio_context = new_context;
5670
5671     if (bs->backing_hd) {
5672         bdrv_attach_aio_context(bs->backing_hd, new_context);
5673     }
5674     if (bs->file) {
5675         bdrv_attach_aio_context(bs->file, new_context);
5676     }
5677     if (bs->drv->bdrv_attach_aio_context) {
5678         bs->drv->bdrv_attach_aio_context(bs, new_context);
5679     }
5680     if (bs->io_limits_enabled) {
5681         throttle_attach_aio_context(&bs->throttle_state, new_context);
5682     }
5683 }
5684
5685 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
5686 {
5687     bdrv_drain_all(); /* ensure there are no in-flight requests */
5688
5689     bdrv_detach_aio_context(bs);
5690
5691     /* This function executes in the old AioContext so acquire the new one in
5692      * case it runs in a different thread.
5693      */
5694     aio_context_acquire(new_context);
5695     bdrv_attach_aio_context(bs, new_context);
5696     aio_context_release(new_context);
5697 }
5698
5699 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5700                                     NotifierWithReturn *notifier)
5701 {
5702     notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5703 }
5704
5705 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts)
5706 {
5707     if (!bs->drv->bdrv_amend_options) {
5708         return -ENOTSUP;
5709     }
5710     return bs->drv->bdrv_amend_options(bs, opts);
5711 }
5712
5713 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5714  * of block filter and by bdrv_is_first_non_filter.
5715  * It is used to test if the given bs is the candidate or recurse more in the
5716  * node graph.
5717  */
5718 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5719                                       BlockDriverState *candidate)
5720 {
5721     /* return false if basic checks fails */
5722     if (!bs || !bs->drv) {
5723         return false;
5724     }
5725
5726     /* the code reached a non block filter driver -> check if the bs is
5727      * the same as the candidate. It's the recursion termination condition.
5728      */
5729     if (!bs->drv->is_filter) {
5730         return bs == candidate;
5731     }
5732     /* Down this path the driver is a block filter driver */
5733
5734     /* If the block filter recursion method is defined use it to recurse down
5735      * the node graph.
5736      */
5737     if (bs->drv->bdrv_recurse_is_first_non_filter) {
5738         return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5739     }
5740
5741     /* the driver is a block filter but don't allow to recurse -> return false
5742      */
5743     return false;
5744 }
5745
5746 /* This function checks if the candidate is the first non filter bs down it's
5747  * bs chain. Since we don't have pointers to parents it explore all bs chains
5748  * from the top. Some filters can choose not to pass down the recursion.
5749  */
5750 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5751 {
5752     BlockDriverState *bs;
5753
5754     /* walk down the bs forest recursively */
5755     QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5756         bool perm;
5757
5758         /* try to recurse in this top level bs */
5759         perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5760
5761         /* candidate is the first non filter */
5762         if (perm) {
5763             return true;
5764         }
5765     }
5766
5767     return false;
5768 }
This page took 0.337341 seconds and 4 git commands to generate.