4 * Copyright (c) 2003-2008 Fabrice Bellard
5 * Copyright (c) 2009-2015 Red Hat Inc
10 * Permission is hereby granted, free of charge, to any person obtaining a copy
11 * of this software and associated documentation files (the "Software"), to deal
12 * in the Software without restriction, including without limitation the rights
13 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
14 * copies of the Software, and to permit persons to whom the Software is
15 * furnished to do so, subject to the following conditions:
17 * The above copyright notice and this permission notice shall be included in
18 * all copies or substantial portions of the Software.
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
23 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
24 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
25 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
29 #include "qemu/osdep.h"
30 #include "hw/boards.h"
31 #include "hw/xen/xen.h"
33 #include "migration.h"
34 #include "migration/snapshot.h"
35 #include "migration/misc.h"
36 #include "migration/register.h"
37 #include "migration/global_state.h"
39 #include "qemu-file-channel.h"
40 #include "qemu-file.h"
42 #include "postcopy-ram.h"
43 #include "qapi/error.h"
44 #include "qapi/qapi-commands-migration.h"
45 #include "qapi/qapi-commands-misc.h"
46 #include "qapi/qmp/qerror.h"
47 #include "qemu/error-report.h"
48 #include "sysemu/cpus.h"
49 #include "exec/memory.h"
50 #include "exec/target_page.h"
53 #include "block/snapshot.h"
54 #include "qemu/cutils.h"
55 #include "io/channel-buffer.h"
56 #include "io/channel-file.h"
57 #include "sysemu/replay.h"
59 #include "migration/colo.h"
62 #define ETH_P_RARP 0x8035
64 #define ARP_HTYPE_ETH 0x0001
65 #define ARP_PTYPE_IP 0x0800
66 #define ARP_OP_REQUEST_REV 0x3
68 const unsigned int postcopy_ram_discard_version = 0;
70 /* Subcommands for QEMU_VM_COMMAND */
72 MIG_CMD_INVALID = 0, /* Must be 0 */
73 MIG_CMD_OPEN_RETURN_PATH, /* Tell the dest to open the Return path */
74 MIG_CMD_PING, /* Request a PONG on the RP */
76 MIG_CMD_POSTCOPY_ADVISE, /* Prior to any page transfers, just
77 warn we might want to do PC */
78 MIG_CMD_POSTCOPY_LISTEN, /* Start listening for incoming
79 pages as it's running. */
80 MIG_CMD_POSTCOPY_RUN, /* Start execution */
82 MIG_CMD_POSTCOPY_RAM_DISCARD, /* A list of pages to discard that
83 were previously sent during
84 precopy but are dirty. */
85 MIG_CMD_PACKAGED, /* Send a wrapped stream within this stream */
86 MIG_CMD_ENABLE_COLO, /* Enable COLO */
87 MIG_CMD_POSTCOPY_RESUME, /* resume postcopy on dest */
88 MIG_CMD_RECV_BITMAP, /* Request for recved bitmap on dst */
92 #define MAX_VM_CMD_PACKAGED_SIZE UINT32_MAX
93 static struct mig_cmd_args {
94 ssize_t len; /* -1 = variable */
97 [MIG_CMD_INVALID] = { .len = -1, .name = "INVALID" },
98 [MIG_CMD_OPEN_RETURN_PATH] = { .len = 0, .name = "OPEN_RETURN_PATH" },
99 [MIG_CMD_PING] = { .len = sizeof(uint32_t), .name = "PING" },
100 [MIG_CMD_POSTCOPY_ADVISE] = { .len = -1, .name = "POSTCOPY_ADVISE" },
101 [MIG_CMD_POSTCOPY_LISTEN] = { .len = 0, .name = "POSTCOPY_LISTEN" },
102 [MIG_CMD_POSTCOPY_RUN] = { .len = 0, .name = "POSTCOPY_RUN" },
103 [MIG_CMD_POSTCOPY_RAM_DISCARD] = {
104 .len = -1, .name = "POSTCOPY_RAM_DISCARD" },
105 [MIG_CMD_POSTCOPY_RESUME] = { .len = 0, .name = "POSTCOPY_RESUME" },
106 [MIG_CMD_PACKAGED] = { .len = 4, .name = "PACKAGED" },
107 [MIG_CMD_RECV_BITMAP] = { .len = -1, .name = "RECV_BITMAP" },
108 [MIG_CMD_MAX] = { .len = -1, .name = "MAX" },
111 /* Note for MIG_CMD_POSTCOPY_ADVISE:
112 * The format of arguments is depending on postcopy mode:
113 * - postcopy RAM only
114 * uint64_t host page size
115 * uint64_t taget page size
117 * - postcopy RAM and postcopy dirty bitmaps
118 * format is the same as for postcopy RAM only
120 * - postcopy dirty bitmaps only
121 * Nothing. Command length field is 0.
123 * Be careful: adding a new postcopy entity with some other parameters should
124 * not break format self-description ability. Good way is to introduce some
125 * generic extendable format with an exception for two old entities.
128 static int announce_self_create(uint8_t *buf,
131 /* Ethernet header. */
132 memset(buf, 0xff, 6); /* destination MAC addr */
133 memcpy(buf + 6, mac_addr, 6); /* source MAC addr */
134 *(uint16_t *)(buf + 12) = htons(ETH_P_RARP); /* ethertype */
137 *(uint16_t *)(buf + 14) = htons(ARP_HTYPE_ETH); /* hardware addr space */
138 *(uint16_t *)(buf + 16) = htons(ARP_PTYPE_IP); /* protocol addr space */
139 *(buf + 18) = 6; /* hardware addr length (ethernet) */
140 *(buf + 19) = 4; /* protocol addr length (IPv4) */
141 *(uint16_t *)(buf + 20) = htons(ARP_OP_REQUEST_REV); /* opcode */
142 memcpy(buf + 22, mac_addr, 6); /* source hw addr */
143 memset(buf + 28, 0x00, 4); /* source protocol addr */
144 memcpy(buf + 32, mac_addr, 6); /* target hw addr */
145 memset(buf + 38, 0x00, 4); /* target protocol addr */
147 /* Padding to get up to 60 bytes (ethernet min packet size, minus FCS). */
148 memset(buf + 42, 0x00, 18);
150 return 60; /* len (FCS will be added by hardware) */
153 static void qemu_announce_self_iter(NICState *nic, void *opaque)
158 trace_qemu_announce_self_iter(qemu_ether_ntoa(&nic->conf->macaddr));
159 len = announce_self_create(buf, nic->conf->macaddr.a);
161 qemu_send_packet_raw(qemu_get_queue(nic), buf, len);
165 static void qemu_announce_self_once(void *opaque)
167 static int count = SELF_ANNOUNCE_ROUNDS;
168 QEMUTimer *timer = *(QEMUTimer **)opaque;
170 qemu_foreach_nic(qemu_announce_self_iter, NULL);
173 /* delay 50ms, 150ms, 250ms, ... */
174 timer_mod(timer, qemu_clock_get_ms(QEMU_CLOCK_REALTIME) +
175 self_announce_delay(count));
182 void qemu_announce_self(void)
184 static QEMUTimer *timer;
185 timer = timer_new_ms(QEMU_CLOCK_REALTIME, qemu_announce_self_once, &timer);
186 qemu_announce_self_once(&timer);
189 /***********************************************************/
190 /* savevm/loadvm support */
192 static ssize_t block_writev_buffer(void *opaque, struct iovec *iov, int iovcnt,
198 qemu_iovec_init_external(&qiov, iov, iovcnt);
199 ret = bdrv_writev_vmstate(opaque, &qiov, pos);
207 static ssize_t block_get_buffer(void *opaque, uint8_t *buf, int64_t pos,
210 return bdrv_load_vmstate(opaque, buf, pos, size);
213 static int bdrv_fclose(void *opaque)
215 return bdrv_flush(opaque);
218 static const QEMUFileOps bdrv_read_ops = {
219 .get_buffer = block_get_buffer,
223 static const QEMUFileOps bdrv_write_ops = {
224 .writev_buffer = block_writev_buffer,
228 static QEMUFile *qemu_fopen_bdrv(BlockDriverState *bs, int is_writable)
231 return qemu_fopen_ops(bs, &bdrv_write_ops);
233 return qemu_fopen_ops(bs, &bdrv_read_ops);
237 /* QEMUFile timer support.
238 * Not in qemu-file.c to not add qemu-timer.c as dependency to qemu-file.c
241 void timer_put(QEMUFile *f, QEMUTimer *ts)
243 uint64_t expire_time;
245 expire_time = timer_expire_time_ns(ts);
246 qemu_put_be64(f, expire_time);
249 void timer_get(QEMUFile *f, QEMUTimer *ts)
251 uint64_t expire_time;
253 expire_time = qemu_get_be64(f);
254 if (expire_time != -1) {
255 timer_mod_ns(ts, expire_time);
262 /* VMState timer support.
263 * Not in vmstate.c to not add qemu-timer.c as dependency to vmstate.c
266 static int get_timer(QEMUFile *f, void *pv, size_t size, VMStateField *field)
273 static int put_timer(QEMUFile *f, void *pv, size_t size, VMStateField *field,
282 const VMStateInfo vmstate_info_timer = {
289 typedef struct CompatEntry {
294 typedef struct SaveStateEntry {
295 QTAILQ_ENTRY(SaveStateEntry) entry;
300 /* version id read from the stream */
303 /* section id read from the stream */
306 const VMStateDescription *vmsd;
312 typedef struct SaveState {
313 QTAILQ_HEAD(, SaveStateEntry) handlers;
314 int global_section_id;
317 uint32_t target_page_bits;
320 static SaveState savevm_state = {
321 .handlers = QTAILQ_HEAD_INITIALIZER(savevm_state.handlers),
322 .global_section_id = 0,
325 static int configuration_pre_save(void *opaque)
327 SaveState *state = opaque;
328 const char *current_name = MACHINE_GET_CLASS(current_machine)->name;
330 state->len = strlen(current_name);
331 state->name = current_name;
332 state->target_page_bits = qemu_target_page_bits();
337 static int configuration_pre_load(void *opaque)
339 SaveState *state = opaque;
341 /* If there is no target-page-bits subsection it means the source
342 * predates the variable-target-page-bits support and is using the
343 * minimum possible value for this CPU.
345 state->target_page_bits = qemu_target_page_bits_min();
349 static int configuration_post_load(void *opaque, int version_id)
351 SaveState *state = opaque;
352 const char *current_name = MACHINE_GET_CLASS(current_machine)->name;
354 if (strncmp(state->name, current_name, state->len) != 0) {
355 error_report("Machine type received is '%.*s' and local is '%s'",
356 (int) state->len, state->name, current_name);
360 if (state->target_page_bits != qemu_target_page_bits()) {
361 error_report("Received TARGET_PAGE_BITS is %d but local is %d",
362 state->target_page_bits, qemu_target_page_bits());
369 /* The target-page-bits subsection is present only if the
370 * target page size is not the same as the default (ie the
371 * minimum page size for a variable-page-size guest CPU).
372 * If it is present then it contains the actual target page
373 * bits for the machine, and migration will fail if the
374 * two ends don't agree about it.
376 static bool vmstate_target_page_bits_needed(void *opaque)
378 return qemu_target_page_bits()
379 > qemu_target_page_bits_min();
382 static const VMStateDescription vmstate_target_page_bits = {
383 .name = "configuration/target-page-bits",
385 .minimum_version_id = 1,
386 .needed = vmstate_target_page_bits_needed,
387 .fields = (VMStateField[]) {
388 VMSTATE_UINT32(target_page_bits, SaveState),
389 VMSTATE_END_OF_LIST()
393 static const VMStateDescription vmstate_configuration = {
394 .name = "configuration",
396 .pre_load = configuration_pre_load,
397 .post_load = configuration_post_load,
398 .pre_save = configuration_pre_save,
399 .fields = (VMStateField[]) {
400 VMSTATE_UINT32(len, SaveState),
401 VMSTATE_VBUFFER_ALLOC_UINT32(name, SaveState, 0, NULL, len),
402 VMSTATE_END_OF_LIST()
404 .subsections = (const VMStateDescription*[]) {
405 &vmstate_target_page_bits,
410 static void dump_vmstate_vmsd(FILE *out_file,
411 const VMStateDescription *vmsd, int indent,
414 static void dump_vmstate_vmsf(FILE *out_file, const VMStateField *field,
417 fprintf(out_file, "%*s{\n", indent, "");
419 fprintf(out_file, "%*s\"field\": \"%s\",\n", indent, "", field->name);
420 fprintf(out_file, "%*s\"version_id\": %d,\n", indent, "",
422 fprintf(out_file, "%*s\"field_exists\": %s,\n", indent, "",
423 field->field_exists ? "true" : "false");
424 fprintf(out_file, "%*s\"size\": %zu", indent, "", field->size);
425 if (field->vmsd != NULL) {
426 fprintf(out_file, ",\n");
427 dump_vmstate_vmsd(out_file, field->vmsd, indent, false);
429 fprintf(out_file, "\n%*s}", indent - 2, "");
432 static void dump_vmstate_vmss(FILE *out_file,
433 const VMStateDescription **subsection,
436 if (*subsection != NULL) {
437 dump_vmstate_vmsd(out_file, *subsection, indent, true);
441 static void dump_vmstate_vmsd(FILE *out_file,
442 const VMStateDescription *vmsd, int indent,
446 fprintf(out_file, "%*s{\n", indent, "");
448 fprintf(out_file, "%*s\"%s\": {\n", indent, "", "Description");
451 fprintf(out_file, "%*s\"name\": \"%s\",\n", indent, "", vmsd->name);
452 fprintf(out_file, "%*s\"version_id\": %d,\n", indent, "",
454 fprintf(out_file, "%*s\"minimum_version_id\": %d", indent, "",
455 vmsd->minimum_version_id);
456 if (vmsd->fields != NULL) {
457 const VMStateField *field = vmsd->fields;
460 fprintf(out_file, ",\n%*s\"Fields\": [\n", indent, "");
462 while (field->name != NULL) {
463 if (field->flags & VMS_MUST_EXIST) {
464 /* Ignore VMSTATE_VALIDATE bits; these don't get migrated */
469 fprintf(out_file, ",\n");
471 dump_vmstate_vmsf(out_file, field, indent + 2);
475 fprintf(out_file, "\n%*s]", indent, "");
477 if (vmsd->subsections != NULL) {
478 const VMStateDescription **subsection = vmsd->subsections;
481 fprintf(out_file, ",\n%*s\"Subsections\": [\n", indent, "");
483 while (*subsection != NULL) {
485 fprintf(out_file, ",\n");
487 dump_vmstate_vmss(out_file, subsection, indent + 2);
491 fprintf(out_file, "\n%*s]", indent, "");
493 fprintf(out_file, "\n%*s}", indent - 2, "");
496 static void dump_machine_type(FILE *out_file)
500 mc = MACHINE_GET_CLASS(current_machine);
502 fprintf(out_file, " \"vmschkmachine\": {\n");
503 fprintf(out_file, " \"Name\": \"%s\"\n", mc->name);
504 fprintf(out_file, " },\n");
507 void dump_vmstate_json_to_file(FILE *out_file)
512 fprintf(out_file, "{\n");
513 dump_machine_type(out_file);
516 list = object_class_get_list(TYPE_DEVICE, true);
517 for (elt = list; elt; elt = elt->next) {
518 DeviceClass *dc = OBJECT_CLASS_CHECK(DeviceClass, elt->data,
528 fprintf(out_file, ",\n");
530 name = object_class_get_name(OBJECT_CLASS(dc));
531 fprintf(out_file, "%*s\"%s\": {\n", indent, "", name);
533 fprintf(out_file, "%*s\"Name\": \"%s\",\n", indent, "", name);
534 fprintf(out_file, "%*s\"version_id\": %d,\n", indent, "",
535 dc->vmsd->version_id);
536 fprintf(out_file, "%*s\"minimum_version_id\": %d,\n", indent, "",
537 dc->vmsd->minimum_version_id);
539 dump_vmstate_vmsd(out_file, dc->vmsd, indent, false);
541 fprintf(out_file, "\n%*s}", indent - 2, "");
544 fprintf(out_file, "\n}\n");
548 static int calculate_new_instance_id(const char *idstr)
553 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
554 if (strcmp(idstr, se->idstr) == 0
555 && instance_id <= se->instance_id) {
556 instance_id = se->instance_id + 1;
562 static int calculate_compat_instance_id(const char *idstr)
567 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
572 if (strcmp(idstr, se->compat->idstr) == 0
573 && instance_id <= se->compat->instance_id) {
574 instance_id = se->compat->instance_id + 1;
580 static inline MigrationPriority save_state_priority(SaveStateEntry *se)
583 return se->vmsd->priority;
585 return MIG_PRI_DEFAULT;
588 static void savevm_state_handler_insert(SaveStateEntry *nse)
590 MigrationPriority priority = save_state_priority(nse);
593 assert(priority <= MIG_PRI_MAX);
595 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
596 if (save_state_priority(se) < priority) {
602 QTAILQ_INSERT_BEFORE(se, nse, entry);
604 QTAILQ_INSERT_TAIL(&savevm_state.handlers, nse, entry);
608 /* TODO: Individual devices generally have very little idea about the rest
609 of the system, so instance_id should be removed/replaced.
610 Meanwhile pass -1 as instance_id if you do not already have a clearly
611 distinguishing id for all instances of your device class. */
612 int register_savevm_live(DeviceState *dev,
621 se = g_new0(SaveStateEntry, 1);
622 se->version_id = version_id;
623 se->section_id = savevm_state.global_section_id++;
627 /* if this is a live_savem then set is_ram */
628 if (ops->save_setup != NULL) {
633 char *id = qdev_get_dev_path(dev);
635 if (snprintf(se->idstr, sizeof(se->idstr), "%s/", id) >=
637 error_report("Path too long for VMState (%s)", id);
645 se->compat = g_new0(CompatEntry, 1);
646 pstrcpy(se->compat->idstr, sizeof(se->compat->idstr), idstr);
647 se->compat->instance_id = instance_id == -1 ?
648 calculate_compat_instance_id(idstr) : instance_id;
652 pstrcat(se->idstr, sizeof(se->idstr), idstr);
654 if (instance_id == -1) {
655 se->instance_id = calculate_new_instance_id(se->idstr);
657 se->instance_id = instance_id;
659 assert(!se->compat || se->instance_id == 0);
660 savevm_state_handler_insert(se);
664 void unregister_savevm(DeviceState *dev, const char *idstr, void *opaque)
666 SaveStateEntry *se, *new_se;
670 char *path = qdev_get_dev_path(dev);
672 pstrcpy(id, sizeof(id), path);
673 pstrcat(id, sizeof(id), "/");
677 pstrcat(id, sizeof(id), idstr);
679 QTAILQ_FOREACH_SAFE(se, &savevm_state.handlers, entry, new_se) {
680 if (strcmp(se->idstr, id) == 0 && se->opaque == opaque) {
681 QTAILQ_REMOVE(&savevm_state.handlers, se, entry);
688 int vmstate_register_with_alias_id(DeviceState *dev, int instance_id,
689 const VMStateDescription *vmsd,
690 void *opaque, int alias_id,
691 int required_for_version,
696 /* If this triggers, alias support can be dropped for the vmsd. */
697 assert(alias_id == -1 || required_for_version >= vmsd->minimum_version_id);
699 se = g_new0(SaveStateEntry, 1);
700 se->version_id = vmsd->version_id;
701 se->section_id = savevm_state.global_section_id++;
704 se->alias_id = alias_id;
707 char *id = qdev_get_dev_path(dev);
709 if (snprintf(se->idstr, sizeof(se->idstr), "%s/", id) >=
711 error_setg(errp, "Path too long for VMState (%s)", id);
719 se->compat = g_new0(CompatEntry, 1);
720 pstrcpy(se->compat->idstr, sizeof(se->compat->idstr), vmsd->name);
721 se->compat->instance_id = instance_id == -1 ?
722 calculate_compat_instance_id(vmsd->name) : instance_id;
726 pstrcat(se->idstr, sizeof(se->idstr), vmsd->name);
728 if (instance_id == -1) {
729 se->instance_id = calculate_new_instance_id(se->idstr);
731 se->instance_id = instance_id;
733 assert(!se->compat || se->instance_id == 0);
734 savevm_state_handler_insert(se);
738 void vmstate_unregister(DeviceState *dev, const VMStateDescription *vmsd,
741 SaveStateEntry *se, *new_se;
743 QTAILQ_FOREACH_SAFE(se, &savevm_state.handlers, entry, new_se) {
744 if (se->vmsd == vmsd && se->opaque == opaque) {
745 QTAILQ_REMOVE(&savevm_state.handlers, se, entry);
752 static int vmstate_load(QEMUFile *f, SaveStateEntry *se)
754 trace_vmstate_load(se->idstr, se->vmsd ? se->vmsd->name : "(old)");
755 if (!se->vmsd) { /* Old style */
756 return se->ops->load_state(f, se->opaque, se->load_version_id);
758 return vmstate_load_state(f, se->vmsd, se->opaque, se->load_version_id);
761 static void vmstate_save_old_style(QEMUFile *f, SaveStateEntry *se, QJSON *vmdesc)
763 int64_t old_offset, size;
765 old_offset = qemu_ftell_fast(f);
766 se->ops->save_state(f, se->opaque);
767 size = qemu_ftell_fast(f) - old_offset;
770 json_prop_int(vmdesc, "size", size);
771 json_start_array(vmdesc, "fields");
772 json_start_object(vmdesc, NULL);
773 json_prop_str(vmdesc, "name", "data");
774 json_prop_int(vmdesc, "size", size);
775 json_prop_str(vmdesc, "type", "buffer");
776 json_end_object(vmdesc);
777 json_end_array(vmdesc);
781 static int vmstate_save(QEMUFile *f, SaveStateEntry *se, QJSON *vmdesc)
783 trace_vmstate_save(se->idstr, se->vmsd ? se->vmsd->name : "(old)");
785 vmstate_save_old_style(f, se, vmdesc);
788 return vmstate_save_state(f, se->vmsd, se->opaque, vmdesc);
792 * Write the header for device section (QEMU_VM_SECTION START/END/PART/FULL)
794 static void save_section_header(QEMUFile *f, SaveStateEntry *se,
795 uint8_t section_type)
797 qemu_put_byte(f, section_type);
798 qemu_put_be32(f, se->section_id);
800 if (section_type == QEMU_VM_SECTION_FULL ||
801 section_type == QEMU_VM_SECTION_START) {
803 size_t len = strlen(se->idstr);
804 qemu_put_byte(f, len);
805 qemu_put_buffer(f, (uint8_t *)se->idstr, len);
807 qemu_put_be32(f, se->instance_id);
808 qemu_put_be32(f, se->version_id);
813 * Write a footer onto device sections that catches cases misformatted device
816 static void save_section_footer(QEMUFile *f, SaveStateEntry *se)
818 if (migrate_get_current()->send_section_footer) {
819 qemu_put_byte(f, QEMU_VM_SECTION_FOOTER);
820 qemu_put_be32(f, se->section_id);
825 * qemu_savevm_command_send: Send a 'QEMU_VM_COMMAND' type element with the
826 * command and associated data.
828 * @f: File to send command on
829 * @command: Command type to send
830 * @len: Length of associated data
831 * @data: Data associated with command.
833 static void qemu_savevm_command_send(QEMUFile *f,
834 enum qemu_vm_cmd command,
838 trace_savevm_command_send(command, len);
839 qemu_put_byte(f, QEMU_VM_COMMAND);
840 qemu_put_be16(f, (uint16_t)command);
841 qemu_put_be16(f, len);
842 qemu_put_buffer(f, data, len);
846 void qemu_savevm_send_colo_enable(QEMUFile *f)
848 trace_savevm_send_colo_enable();
849 qemu_savevm_command_send(f, MIG_CMD_ENABLE_COLO, 0, NULL);
852 void qemu_savevm_send_ping(QEMUFile *f, uint32_t value)
856 trace_savevm_send_ping(value);
857 buf = cpu_to_be32(value);
858 qemu_savevm_command_send(f, MIG_CMD_PING, sizeof(value), (uint8_t *)&buf);
861 void qemu_savevm_send_open_return_path(QEMUFile *f)
863 trace_savevm_send_open_return_path();
864 qemu_savevm_command_send(f, MIG_CMD_OPEN_RETURN_PATH, 0, NULL);
867 /* We have a buffer of data to send; we don't want that all to be loaded
868 * by the command itself, so the command contains just the length of the
869 * extra buffer that we then send straight after it.
870 * TODO: Must be a better way to organise that
876 int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len)
880 if (len > MAX_VM_CMD_PACKAGED_SIZE) {
881 error_report("%s: Unreasonably large packaged state: %zu",
886 tmp = cpu_to_be32(len);
888 trace_qemu_savevm_send_packaged();
889 qemu_savevm_command_send(f, MIG_CMD_PACKAGED, 4, (uint8_t *)&tmp);
891 qemu_put_buffer(f, buf, len);
896 /* Send prior to any postcopy transfer */
897 void qemu_savevm_send_postcopy_advise(QEMUFile *f)
899 if (migrate_postcopy_ram()) {
901 tmp[0] = cpu_to_be64(ram_pagesize_summary());
902 tmp[1] = cpu_to_be64(qemu_target_page_size());
904 trace_qemu_savevm_send_postcopy_advise();
905 qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE,
908 qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_ADVISE, 0, NULL);
912 /* Sent prior to starting the destination running in postcopy, discard pages
913 * that have already been sent but redirtied on the source.
914 * CMD_POSTCOPY_RAM_DISCARD consist of:
916 * byte Length of name field (not including 0)
917 * n x byte RAM block name
918 * byte 0 terminator (just for safety)
919 * n x Byte ranges within the named RAMBlock
920 * be64 Start of the range
923 * name: RAMBlock name that these entries are part of
924 * len: Number of page entries
925 * start_list: 'len' addresses
926 * length_list: 'len' addresses
929 void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
931 uint64_t *start_list,
932 uint64_t *length_list)
937 size_t name_len = strlen(name);
939 trace_qemu_savevm_send_postcopy_ram_discard(name, len);
940 assert(name_len < 256);
941 buf = g_malloc0(1 + 1 + name_len + 1 + (8 + 8) * len);
942 buf[0] = postcopy_ram_discard_version;
944 memcpy(buf + 2, name, name_len);
945 tmplen = 2 + name_len;
946 buf[tmplen++] = '\0';
948 for (t = 0; t < len; t++) {
949 stq_be_p(buf + tmplen, start_list[t]);
951 stq_be_p(buf + tmplen, length_list[t]);
954 qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RAM_DISCARD, tmplen, buf);
958 /* Get the destination into a state where it can receive postcopy data. */
959 void qemu_savevm_send_postcopy_listen(QEMUFile *f)
961 trace_savevm_send_postcopy_listen();
962 qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_LISTEN, 0, NULL);
965 /* Kick the destination into running */
966 void qemu_savevm_send_postcopy_run(QEMUFile *f)
968 trace_savevm_send_postcopy_run();
969 qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RUN, 0, NULL);
972 void qemu_savevm_send_postcopy_resume(QEMUFile *f)
974 trace_savevm_send_postcopy_resume();
975 qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RESUME, 0, NULL);
978 void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name)
983 trace_savevm_send_recv_bitmap(block_name);
985 buf[0] = len = strlen(block_name);
986 memcpy(buf + 1, block_name, len);
988 qemu_savevm_command_send(f, MIG_CMD_RECV_BITMAP, len + 1, (uint8_t *)buf);
991 bool qemu_savevm_state_blocked(Error **errp)
995 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
996 if (se->vmsd && se->vmsd->unmigratable) {
997 error_setg(errp, "State blocked by non-migratable device '%s'",
1005 void qemu_savevm_state_header(QEMUFile *f)
1007 trace_savevm_state_header();
1008 qemu_put_be32(f, QEMU_VM_FILE_MAGIC);
1009 qemu_put_be32(f, QEMU_VM_FILE_VERSION);
1011 if (migrate_get_current()->send_configuration) {
1012 qemu_put_byte(f, QEMU_VM_CONFIGURATION);
1013 vmstate_save_state(f, &vmstate_configuration, &savevm_state, 0);
1017 void qemu_savevm_state_setup(QEMUFile *f)
1022 trace_savevm_state_setup();
1023 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1024 if (!se->ops || !se->ops->save_setup) {
1027 if (se->ops && se->ops->is_active) {
1028 if (!se->ops->is_active(se->opaque)) {
1032 save_section_header(f, se, QEMU_VM_SECTION_START);
1034 ret = se->ops->save_setup(f, se->opaque);
1035 save_section_footer(f, se);
1037 qemu_file_set_error(f, ret);
1043 int qemu_savevm_state_resume_prepare(MigrationState *s)
1048 trace_savevm_state_resume_prepare();
1050 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1051 if (!se->ops || !se->ops->resume_prepare) {
1054 if (se->ops && se->ops->is_active) {
1055 if (!se->ops->is_active(se->opaque)) {
1059 ret = se->ops->resume_prepare(s, se->opaque);
1069 * this function has three return values:
1070 * negative: there was one error, and we have -errno.
1071 * 0 : We haven't finished, caller have to go again
1072 * 1 : We have finished, we can go to complete phase
1074 int qemu_savevm_state_iterate(QEMUFile *f, bool postcopy)
1079 trace_savevm_state_iterate();
1080 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1081 if (!se->ops || !se->ops->save_live_iterate) {
1084 if (se->ops && se->ops->is_active) {
1085 if (!se->ops->is_active(se->opaque)) {
1089 if (se->ops && se->ops->is_active_iterate) {
1090 if (!se->ops->is_active_iterate(se->opaque)) {
1095 * In the postcopy phase, any device that doesn't know how to
1096 * do postcopy should have saved it's state in the _complete
1097 * call that's already run, it might get confused if we call
1098 * iterate afterwards.
1101 !(se->ops->has_postcopy && se->ops->has_postcopy(se->opaque))) {
1104 if (qemu_file_rate_limit(f)) {
1107 trace_savevm_section_start(se->idstr, se->section_id);
1109 save_section_header(f, se, QEMU_VM_SECTION_PART);
1111 ret = se->ops->save_live_iterate(f, se->opaque);
1112 trace_savevm_section_end(se->idstr, se->section_id, ret);
1113 save_section_footer(f, se);
1116 qemu_file_set_error(f, ret);
1119 /* Do not proceed to the next vmstate before this one reported
1120 completion of the current stage. This serializes the migration
1121 and reduces the probability that a faster changing state is
1122 synchronized over and over again. */
1129 static bool should_send_vmdesc(void)
1131 MachineState *machine = MACHINE(qdev_get_machine());
1132 bool in_postcopy = migration_in_postcopy();
1133 return !machine->suppress_vmdesc && !in_postcopy;
1137 * Calls the save_live_complete_postcopy methods
1138 * causing the last few pages to be sent immediately and doing any associated
1140 * Note postcopy also calls qemu_savevm_state_complete_precopy to complete
1141 * all the other devices, but that happens at the point we switch to postcopy.
1143 void qemu_savevm_state_complete_postcopy(QEMUFile *f)
1148 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1149 if (!se->ops || !se->ops->save_live_complete_postcopy) {
1152 if (se->ops && se->ops->is_active) {
1153 if (!se->ops->is_active(se->opaque)) {
1157 trace_savevm_section_start(se->idstr, se->section_id);
1159 qemu_put_byte(f, QEMU_VM_SECTION_END);
1160 qemu_put_be32(f, se->section_id);
1162 ret = se->ops->save_live_complete_postcopy(f, se->opaque);
1163 trace_savevm_section_end(se->idstr, se->section_id, ret);
1164 save_section_footer(f, se);
1166 qemu_file_set_error(f, ret);
1171 qemu_put_byte(f, QEMU_VM_EOF);
1175 int qemu_savevm_state_complete_precopy(QEMUFile *f, bool iterable_only,
1176 bool inactivate_disks)
1182 bool in_postcopy = migration_in_postcopy();
1184 trace_savevm_state_complete_precopy();
1186 cpu_synchronize_all_states();
1188 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1190 (in_postcopy && se->ops->has_postcopy &&
1191 se->ops->has_postcopy(se->opaque)) ||
1192 (in_postcopy && !iterable_only) ||
1193 !se->ops->save_live_complete_precopy) {
1197 if (se->ops && se->ops->is_active) {
1198 if (!se->ops->is_active(se->opaque)) {
1202 trace_savevm_section_start(se->idstr, se->section_id);
1204 save_section_header(f, se, QEMU_VM_SECTION_END);
1206 ret = se->ops->save_live_complete_precopy(f, se->opaque);
1207 trace_savevm_section_end(se->idstr, se->section_id, ret);
1208 save_section_footer(f, se);
1210 qemu_file_set_error(f, ret);
1215 if (iterable_only) {
1219 vmdesc = qjson_new();
1220 json_prop_int(vmdesc, "page_size", qemu_target_page_size());
1221 json_start_array(vmdesc, "devices");
1222 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1224 if ((!se->ops || !se->ops->save_state) && !se->vmsd) {
1227 if (se->vmsd && !vmstate_save_needed(se->vmsd, se->opaque)) {
1228 trace_savevm_section_skip(se->idstr, se->section_id);
1232 trace_savevm_section_start(se->idstr, se->section_id);
1234 json_start_object(vmdesc, NULL);
1235 json_prop_str(vmdesc, "name", se->idstr);
1236 json_prop_int(vmdesc, "instance_id", se->instance_id);
1238 save_section_header(f, se, QEMU_VM_SECTION_FULL);
1239 ret = vmstate_save(f, se, vmdesc);
1241 qemu_file_set_error(f, ret);
1244 trace_savevm_section_end(se->idstr, se->section_id, 0);
1245 save_section_footer(f, se);
1247 json_end_object(vmdesc);
1250 if (inactivate_disks) {
1251 /* Inactivate before sending QEMU_VM_EOF so that the
1252 * bdrv_invalidate_cache_all() on the other end won't fail. */
1253 ret = bdrv_inactivate_all();
1255 error_report("%s: bdrv_inactivate_all() failed (%d)",
1257 qemu_file_set_error(f, ret);
1262 /* Postcopy stream will still be going */
1263 qemu_put_byte(f, QEMU_VM_EOF);
1266 json_end_array(vmdesc);
1267 qjson_finish(vmdesc);
1268 vmdesc_len = strlen(qjson_get_str(vmdesc));
1270 if (should_send_vmdesc()) {
1271 qemu_put_byte(f, QEMU_VM_VMDESCRIPTION);
1272 qemu_put_be32(f, vmdesc_len);
1273 qemu_put_buffer(f, (uint8_t *)qjson_get_str(vmdesc), vmdesc_len);
1275 qjson_destroy(vmdesc);
1281 /* Give an estimate of the amount left to be transferred,
1282 * the result is split into the amount for units that can and
1283 * for units that can't do postcopy.
1285 void qemu_savevm_state_pending(QEMUFile *f, uint64_t threshold_size,
1286 uint64_t *res_precopy_only,
1287 uint64_t *res_compatible,
1288 uint64_t *res_postcopy_only)
1292 *res_precopy_only = 0;
1293 *res_compatible = 0;
1294 *res_postcopy_only = 0;
1297 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1298 if (!se->ops || !se->ops->save_live_pending) {
1301 if (se->ops && se->ops->is_active) {
1302 if (!se->ops->is_active(se->opaque)) {
1306 se->ops->save_live_pending(f, se->opaque, threshold_size,
1307 res_precopy_only, res_compatible,
1312 void qemu_savevm_state_cleanup(void)
1316 trace_savevm_state_cleanup();
1317 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1318 if (se->ops && se->ops->save_cleanup) {
1319 se->ops->save_cleanup(se->opaque);
1324 static int qemu_savevm_state(QEMUFile *f, Error **errp)
1327 MigrationState *ms = migrate_get_current();
1328 MigrationStatus status;
1332 ms->to_dst_file = f;
1334 if (migration_is_blocked(errp)) {
1339 if (migrate_use_block()) {
1340 error_setg(errp, "Block migration and snapshots are incompatible");
1345 qemu_mutex_unlock_iothread();
1346 qemu_savevm_state_header(f);
1347 qemu_savevm_state_setup(f);
1348 qemu_mutex_lock_iothread();
1350 while (qemu_file_get_error(f) == 0) {
1351 if (qemu_savevm_state_iterate(f, false) > 0) {
1356 ret = qemu_file_get_error(f);
1358 qemu_savevm_state_complete_precopy(f, false, false);
1359 ret = qemu_file_get_error(f);
1361 qemu_savevm_state_cleanup();
1363 error_setg_errno(errp, -ret, "Error while writing VM state");
1368 status = MIGRATION_STATUS_FAILED;
1370 status = MIGRATION_STATUS_COMPLETED;
1372 migrate_set_state(&ms->state, MIGRATION_STATUS_SETUP, status);
1374 /* f is outer parameter, it should not stay in global migration state after
1375 * this function finished */
1376 ms->to_dst_file = NULL;
1381 void qemu_savevm_live_state(QEMUFile *f)
1383 /* save QEMU_VM_SECTION_END section */
1384 qemu_savevm_state_complete_precopy(f, true, false);
1385 qemu_put_byte(f, QEMU_VM_EOF);
1388 int qemu_save_device_state(QEMUFile *f)
1392 if (!migration_in_colo_state()) {
1393 qemu_put_be32(f, QEMU_VM_FILE_MAGIC);
1394 qemu_put_be32(f, QEMU_VM_FILE_VERSION);
1396 cpu_synchronize_all_states();
1398 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1404 if ((!se->ops || !se->ops->save_state) && !se->vmsd) {
1407 if (se->vmsd && !vmstate_save_needed(se->vmsd, se->opaque)) {
1411 save_section_header(f, se, QEMU_VM_SECTION_FULL);
1413 ret = vmstate_save(f, se, NULL);
1418 save_section_footer(f, se);
1421 qemu_put_byte(f, QEMU_VM_EOF);
1423 return qemu_file_get_error(f);
1426 static SaveStateEntry *find_se(const char *idstr, int instance_id)
1430 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
1431 if (!strcmp(se->idstr, idstr) &&
1432 (instance_id == se->instance_id ||
1433 instance_id == se->alias_id))
1435 /* Migrating from an older version? */
1436 if (strstr(se->idstr, idstr) && se->compat) {
1437 if (!strcmp(se->compat->idstr, idstr) &&
1438 (instance_id == se->compat->instance_id ||
1439 instance_id == se->alias_id))
1446 enum LoadVMExitCodes {
1447 /* Allow a command to quit all layers of nested loadvm loops */
1451 /* ------ incoming postcopy messages ------ */
1452 /* 'advise' arrives before any transfers just to tell us that a postcopy
1453 * *might* happen - it might be skipped if precopy transferred everything
1456 static int loadvm_postcopy_handle_advise(MigrationIncomingState *mis,
1459 PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_ADVISE);
1460 uint64_t remote_pagesize_summary, local_pagesize_summary, remote_tps;
1461 Error *local_err = NULL;
1463 trace_loadvm_postcopy_handle_advise();
1464 if (ps != POSTCOPY_INCOMING_NONE) {
1465 error_report("CMD_POSTCOPY_ADVISE in wrong postcopy state (%d)", ps);
1471 if (migrate_postcopy_ram()) {
1472 error_report("RAM postcopy is enabled but have 0 byte advise");
1477 if (!migrate_postcopy_ram()) {
1478 error_report("RAM postcopy is disabled but have 16 byte advise");
1483 error_report("CMD_POSTCOPY_ADVISE invalid length (%d)", len);
1487 if (!postcopy_ram_supported_by_host(mis)) {
1488 postcopy_state_set(POSTCOPY_INCOMING_NONE);
1492 remote_pagesize_summary = qemu_get_be64(mis->from_src_file);
1493 local_pagesize_summary = ram_pagesize_summary();
1495 if (remote_pagesize_summary != local_pagesize_summary) {
1497 * This detects two potential causes of mismatch:
1498 * a) A mismatch in host page sizes
1499 * Some combinations of mismatch are probably possible but it gets
1500 * a bit more complicated. In particular we need to place whole
1501 * host pages on the dest at once, and we need to ensure that we
1502 * handle dirtying to make sure we never end up sending part of
1503 * a hostpage on it's own.
1504 * b) The use of different huge page sizes on source/destination
1505 * a more fine grain test is performed during RAM block migration
1506 * but this test here causes a nice early clear failure, and
1507 * also fails when passed to an older qemu that doesn't
1510 error_report("Postcopy needs matching RAM page sizes (s=%" PRIx64
1512 remote_pagesize_summary, local_pagesize_summary);
1516 remote_tps = qemu_get_be64(mis->from_src_file);
1517 if (remote_tps != qemu_target_page_size()) {
1519 * Again, some differences could be dealt with, but for now keep it
1522 error_report("Postcopy needs matching target page sizes (s=%d d=%zd)",
1523 (int)remote_tps, qemu_target_page_size());
1527 if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_ADVISE, &local_err)) {
1528 error_report_err(local_err);
1532 if (ram_postcopy_incoming_init(mis)) {
1536 postcopy_state_set(POSTCOPY_INCOMING_ADVISE);
1541 /* After postcopy we will be told to throw some pages away since they're
1542 * dirty and will have to be demand fetched. Must happen before CPU is
1544 * There can be 0..many of these messages, each encoding multiple pages.
1546 static int loadvm_postcopy_ram_handle_discard(MigrationIncomingState *mis,
1551 PostcopyState ps = postcopy_state_get();
1553 trace_loadvm_postcopy_ram_handle_discard();
1556 case POSTCOPY_INCOMING_ADVISE:
1558 tmp = postcopy_ram_prepare_discard(mis);
1564 case POSTCOPY_INCOMING_DISCARD:
1565 /* Expected state */
1569 error_report("CMD_POSTCOPY_RAM_DISCARD in wrong postcopy state (%d)",
1573 /* We're expecting a
1575 * a RAM ID string (length byte, name, 0 term)
1576 * then at least 1 16 byte chunk
1578 if (len < (1 + 1 + 1 + 1 + 2 * 8)) {
1579 error_report("CMD_POSTCOPY_RAM_DISCARD invalid length (%d)", len);
1583 tmp = qemu_get_byte(mis->from_src_file);
1584 if (tmp != postcopy_ram_discard_version) {
1585 error_report("CMD_POSTCOPY_RAM_DISCARD invalid version (%d)", tmp);
1589 if (!qemu_get_counted_string(mis->from_src_file, ramid)) {
1590 error_report("CMD_POSTCOPY_RAM_DISCARD Failed to read RAMBlock ID");
1593 tmp = qemu_get_byte(mis->from_src_file);
1595 error_report("CMD_POSTCOPY_RAM_DISCARD missing nil (%d)", tmp);
1599 len -= 3 + strlen(ramid);
1601 error_report("CMD_POSTCOPY_RAM_DISCARD invalid length (%d)", len);
1604 trace_loadvm_postcopy_ram_handle_discard_header(ramid, len);
1606 uint64_t start_addr, block_length;
1607 start_addr = qemu_get_be64(mis->from_src_file);
1608 block_length = qemu_get_be64(mis->from_src_file);
1611 int ret = ram_discard_range(ramid, start_addr, block_length);
1616 trace_loadvm_postcopy_ram_handle_discard_end();
1622 * Triggered by a postcopy_listen command; this thread takes over reading
1623 * the input stream, leaving the main thread free to carry on loading the rest
1624 * of the device state (from RAM).
1625 * (TODO:This could do with being in a postcopy file - but there again it's
1626 * just another input loop, not that postcopy specific)
1628 static void *postcopy_ram_listen_thread(void *opaque)
1630 MigrationIncomingState *mis = migration_incoming_get_current();
1631 QEMUFile *f = mis->from_src_file;
1634 migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
1635 MIGRATION_STATUS_POSTCOPY_ACTIVE);
1636 qemu_sem_post(&mis->listen_thread_sem);
1637 trace_postcopy_ram_listen_thread_start();
1639 rcu_register_thread();
1641 * Because we're a thread and not a coroutine we can't yield
1642 * in qemu_file, and thus we must be blocking now.
1644 qemu_file_set_blocking(f, true);
1645 load_res = qemu_loadvm_state_main(f, mis);
1648 * This is tricky, but, mis->from_src_file can change after it
1649 * returns, when postcopy recovery happened. In the future, we may
1650 * want a wrapper for the QEMUFile handle.
1652 f = mis->from_src_file;
1654 /* And non-blocking again so we don't block in any cleanup */
1655 qemu_file_set_blocking(f, false);
1657 trace_postcopy_ram_listen_thread_exit();
1659 error_report("%s: loadvm failed: %d", __func__, load_res);
1660 qemu_file_set_error(f, load_res);
1661 migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
1662 MIGRATION_STATUS_FAILED);
1665 * This looks good, but it's possible that the device loading in the
1666 * main thread hasn't finished yet, and so we might not be in 'RUN'
1667 * state yet; wait for the end of the main thread.
1669 qemu_event_wait(&mis->main_thread_load_event);
1671 postcopy_ram_incoming_cleanup(mis);
1675 * If something went wrong then we have a bad state so exit;
1676 * depending how far we got it might be possible at this point
1677 * to leave the guest running and fire MCEs for pages that never
1678 * arrived as a desperate recovery step.
1680 rcu_unregister_thread();
1684 migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
1685 MIGRATION_STATUS_COMPLETED);
1687 * If everything has worked fine, then the main thread has waited
1688 * for us to start, and we're the last use of the mis.
1689 * (If something broke then qemu will have to exit anyway since it's
1690 * got a bad migration state).
1692 migration_incoming_state_destroy();
1693 qemu_loadvm_state_cleanup();
1695 rcu_unregister_thread();
1696 mis->have_listen_thread = false;
1700 /* After this message we must be able to immediately receive postcopy data */
1701 static int loadvm_postcopy_handle_listen(MigrationIncomingState *mis)
1703 PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_LISTENING);
1704 trace_loadvm_postcopy_handle_listen();
1705 Error *local_err = NULL;
1707 if (ps != POSTCOPY_INCOMING_ADVISE && ps != POSTCOPY_INCOMING_DISCARD) {
1708 error_report("CMD_POSTCOPY_LISTEN in wrong postcopy state (%d)", ps);
1711 if (ps == POSTCOPY_INCOMING_ADVISE) {
1713 * A rare case, we entered listen without having to do any discards,
1714 * so do the setup that's normally done at the time of the 1st discard.
1716 if (migrate_postcopy_ram()) {
1717 postcopy_ram_prepare_discard(mis);
1722 * Sensitise RAM - can now generate requests for blocks that don't exist
1723 * However, at this point the CPU shouldn't be running, and the IO
1724 * shouldn't be doing anything yet so don't actually expect requests
1726 if (migrate_postcopy_ram()) {
1727 if (postcopy_ram_enable_notify(mis)) {
1732 if (postcopy_notify(POSTCOPY_NOTIFY_INBOUND_LISTEN, &local_err)) {
1733 error_report_err(local_err);
1737 if (mis->have_listen_thread) {
1738 error_report("CMD_POSTCOPY_RAM_LISTEN already has a listen thread");
1742 mis->have_listen_thread = true;
1743 /* Start up the listening thread and wait for it to signal ready */
1744 qemu_sem_init(&mis->listen_thread_sem, 0);
1745 qemu_thread_create(&mis->listen_thread, "postcopy/listen",
1746 postcopy_ram_listen_thread, NULL,
1747 QEMU_THREAD_DETACHED);
1748 qemu_sem_wait(&mis->listen_thread_sem);
1749 qemu_sem_destroy(&mis->listen_thread_sem);
1759 static void loadvm_postcopy_handle_run_bh(void *opaque)
1761 Error *local_err = NULL;
1762 HandleRunBhData *data = opaque;
1764 /* TODO we should move all of this lot into postcopy_ram.c or a shared code
1767 cpu_synchronize_all_post_init();
1769 qemu_announce_self();
1771 /* Make sure all file formats flush their mutable metadata.
1772 * If we get an error here, just don't restart the VM yet. */
1773 bdrv_invalidate_cache_all(&local_err);
1775 error_report_err(local_err);
1780 trace_loadvm_postcopy_handle_run_cpu_sync();
1781 cpu_synchronize_all_post_init();
1783 trace_loadvm_postcopy_handle_run_vmstart();
1785 dirty_bitmap_mig_before_vm_start();
1788 /* Hold onto your hats, starting the CPU */
1791 /* leave it paused and let management decide when to start the CPU */
1792 runstate_set(RUN_STATE_PAUSED);
1795 qemu_bh_delete(data->bh);
1799 /* After all discards we can start running and asking for pages */
1800 static int loadvm_postcopy_handle_run(MigrationIncomingState *mis)
1802 PostcopyState ps = postcopy_state_set(POSTCOPY_INCOMING_RUNNING);
1803 HandleRunBhData *data;
1805 trace_loadvm_postcopy_handle_run();
1806 if (ps != POSTCOPY_INCOMING_LISTENING) {
1807 error_report("CMD_POSTCOPY_RUN in wrong postcopy state (%d)", ps);
1811 data = g_new(HandleRunBhData, 1);
1812 data->bh = qemu_bh_new(loadvm_postcopy_handle_run_bh, data);
1813 qemu_bh_schedule(data->bh);
1815 /* We need to finish reading the stream from the package
1816 * and also stop reading anything more from the stream that loaded the
1817 * package (since it's now being read by the listener thread).
1818 * LOADVM_QUIT will quit all the layers of nested loadvm loops.
1823 static int loadvm_postcopy_handle_resume(MigrationIncomingState *mis)
1825 if (mis->state != MIGRATION_STATUS_POSTCOPY_RECOVER) {
1826 error_report("%s: illegal resume received", __func__);
1827 /* Don't fail the load, only for this. */
1832 * This means source VM is ready to resume the postcopy migration.
1833 * It's time to switch state and release the fault thread to
1834 * continue service page faults.
1836 migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_RECOVER,
1837 MIGRATION_STATUS_POSTCOPY_ACTIVE);
1838 qemu_sem_post(&mis->postcopy_pause_sem_fault);
1840 trace_loadvm_postcopy_handle_resume();
1842 /* Tell source that "we are ready" */
1843 migrate_send_rp_resume_ack(mis, MIGRATION_RESUME_ACK_VALUE);
1849 * Immediately following this command is a blob of data containing an embedded
1850 * chunk of migration stream; read it and load it.
1852 * @mis: Incoming state
1853 * @length: Length of packaged data to read
1855 * Returns: Negative values on error
1858 static int loadvm_handle_cmd_packaged(MigrationIncomingState *mis)
1862 QIOChannelBuffer *bioc;
1864 length = qemu_get_be32(mis->from_src_file);
1865 trace_loadvm_handle_cmd_packaged(length);
1867 if (length > MAX_VM_CMD_PACKAGED_SIZE) {
1868 error_report("Unreasonably large packaged state: %zu", length);
1872 bioc = qio_channel_buffer_new(length);
1873 qio_channel_set_name(QIO_CHANNEL(bioc), "migration-loadvm-buffer");
1874 ret = qemu_get_buffer(mis->from_src_file,
1877 if (ret != length) {
1878 object_unref(OBJECT(bioc));
1879 error_report("CMD_PACKAGED: Buffer receive fail ret=%d length=%zu",
1881 return (ret < 0) ? ret : -EAGAIN;
1883 bioc->usage += length;
1884 trace_loadvm_handle_cmd_packaged_received(ret);
1886 QEMUFile *packf = qemu_fopen_channel_input(QIO_CHANNEL(bioc));
1888 ret = qemu_loadvm_state_main(packf, mis);
1889 trace_loadvm_handle_cmd_packaged_main(ret);
1891 object_unref(OBJECT(bioc));
1897 * Handle request that source requests for recved_bitmap on
1898 * destination. Payload format:
1900 * len (1 byte) + ramblock_name (<255 bytes)
1902 static int loadvm_handle_recv_bitmap(MigrationIncomingState *mis,
1905 QEMUFile *file = mis->from_src_file;
1907 char block_name[256];
1910 cnt = qemu_get_counted_string(file, block_name);
1912 error_report("%s: failed to read block name", __func__);
1916 /* Validate before using the data */
1917 if (qemu_file_get_error(file)) {
1918 return qemu_file_get_error(file);
1921 if (len != cnt + 1) {
1922 error_report("%s: invalid payload length (%d)", __func__, len);
1926 rb = qemu_ram_block_by_name(block_name);
1928 error_report("%s: block '%s' not found", __func__, block_name);
1932 migrate_send_rp_recv_bitmap(mis, block_name);
1934 trace_loadvm_handle_recv_bitmap(block_name);
1939 static int loadvm_process_enable_colo(MigrationIncomingState *mis)
1941 migration_incoming_enable_colo();
1942 return colo_init_ram_cache();
1946 * Process an incoming 'QEMU_VM_COMMAND'
1947 * 0 just a normal return
1948 * LOADVM_QUIT All good, but exit the loop
1951 static int loadvm_process_command(QEMUFile *f)
1953 MigrationIncomingState *mis = migration_incoming_get_current();
1958 cmd = qemu_get_be16(f);
1959 len = qemu_get_be16(f);
1961 /* Check validity before continue processing of cmds */
1962 if (qemu_file_get_error(f)) {
1963 return qemu_file_get_error(f);
1966 trace_loadvm_process_command(cmd, len);
1967 if (cmd >= MIG_CMD_MAX || cmd == MIG_CMD_INVALID) {
1968 error_report("MIG_CMD 0x%x unknown (len 0x%x)", cmd, len);
1972 if (mig_cmd_args[cmd].len != -1 && mig_cmd_args[cmd].len != len) {
1973 error_report("%s received with bad length - expecting %zu, got %d",
1974 mig_cmd_args[cmd].name,
1975 (size_t)mig_cmd_args[cmd].len, len);
1980 case MIG_CMD_OPEN_RETURN_PATH:
1981 if (mis->to_src_file) {
1982 error_report("CMD_OPEN_RETURN_PATH called when RP already open");
1983 /* Not really a problem, so don't give up */
1986 mis->to_src_file = qemu_file_get_return_path(f);
1987 if (!mis->to_src_file) {
1988 error_report("CMD_OPEN_RETURN_PATH failed");
1994 tmp32 = qemu_get_be32(f);
1995 trace_loadvm_process_command_ping(tmp32);
1996 if (!mis->to_src_file) {
1997 error_report("CMD_PING (0x%x) received with no return path",
2001 migrate_send_rp_pong(mis, tmp32);
2004 case MIG_CMD_PACKAGED:
2005 return loadvm_handle_cmd_packaged(mis);
2007 case MIG_CMD_POSTCOPY_ADVISE:
2008 return loadvm_postcopy_handle_advise(mis, len);
2010 case MIG_CMD_POSTCOPY_LISTEN:
2011 return loadvm_postcopy_handle_listen(mis);
2013 case MIG_CMD_POSTCOPY_RUN:
2014 return loadvm_postcopy_handle_run(mis);
2016 case MIG_CMD_POSTCOPY_RAM_DISCARD:
2017 return loadvm_postcopy_ram_handle_discard(mis, len);
2019 case MIG_CMD_POSTCOPY_RESUME:
2020 return loadvm_postcopy_handle_resume(mis);
2022 case MIG_CMD_RECV_BITMAP:
2023 return loadvm_handle_recv_bitmap(mis, len);
2025 case MIG_CMD_ENABLE_COLO:
2026 return loadvm_process_enable_colo(mis);
2033 * Read a footer off the wire and check that it matches the expected section
2035 * Returns: true if the footer was good
2036 * false if there is a problem (and calls error_report to say why)
2038 static bool check_section_footer(QEMUFile *f, SaveStateEntry *se)
2042 uint32_t read_section_id;
2044 if (!migrate_get_current()->send_section_footer) {
2045 /* No footer to check */
2049 read_mark = qemu_get_byte(f);
2051 ret = qemu_file_get_error(f);
2053 error_report("%s: Read section footer failed: %d",
2058 if (read_mark != QEMU_VM_SECTION_FOOTER) {
2059 error_report("Missing section footer for %s", se->idstr);
2063 read_section_id = qemu_get_be32(f);
2064 if (read_section_id != se->load_section_id) {
2065 error_report("Mismatched section id in footer for %s -"
2066 " read 0x%x expected 0x%x",
2067 se->idstr, read_section_id, se->load_section_id);
2076 qemu_loadvm_section_start_full(QEMUFile *f, MigrationIncomingState *mis)
2078 uint32_t instance_id, version_id, section_id;
2083 /* Read section start */
2084 section_id = qemu_get_be32(f);
2085 if (!qemu_get_counted_string(f, idstr)) {
2086 error_report("Unable to read ID string for section %u",
2090 instance_id = qemu_get_be32(f);
2091 version_id = qemu_get_be32(f);
2093 ret = qemu_file_get_error(f);
2095 error_report("%s: Failed to read instance/version ID: %d",
2100 trace_qemu_loadvm_state_section_startfull(section_id, idstr,
2101 instance_id, version_id);
2102 /* Find savevm section */
2103 se = find_se(idstr, instance_id);
2105 error_report("Unknown savevm section or instance '%s' %d. "
2106 "Make sure that your current VM setup matches your "
2107 "saved VM setup, including any hotplugged devices",
2108 idstr, instance_id);
2112 /* Validate version */
2113 if (version_id > se->version_id) {
2114 error_report("savevm: unsupported version %d for '%s' v%d",
2115 version_id, idstr, se->version_id);
2118 se->load_version_id = version_id;
2119 se->load_section_id = section_id;
2121 /* Validate if it is a device's state */
2122 if (xen_enabled() && se->is_ram) {
2123 error_report("loadvm: %s RAM loading not allowed on Xen", idstr);
2127 ret = vmstate_load(f, se);
2129 error_report("error while loading state for instance 0x%x of"
2130 " device '%s'", instance_id, idstr);
2133 if (!check_section_footer(f, se)) {
2141 qemu_loadvm_section_part_end(QEMUFile *f, MigrationIncomingState *mis)
2143 uint32_t section_id;
2147 section_id = qemu_get_be32(f);
2149 ret = qemu_file_get_error(f);
2151 error_report("%s: Failed to read section ID: %d",
2156 trace_qemu_loadvm_state_section_partend(section_id);
2157 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
2158 if (se->load_section_id == section_id) {
2163 error_report("Unknown savevm section %d", section_id);
2167 ret = vmstate_load(f, se);
2169 error_report("error while loading state section id %d(%s)",
2170 section_id, se->idstr);
2173 if (!check_section_footer(f, se)) {
2180 static int qemu_loadvm_state_setup(QEMUFile *f)
2185 trace_loadvm_state_setup();
2186 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
2187 if (!se->ops || !se->ops->load_setup) {
2190 if (se->ops && se->ops->is_active) {
2191 if (!se->ops->is_active(se->opaque)) {
2196 ret = se->ops->load_setup(f, se->opaque);
2198 qemu_file_set_error(f, ret);
2199 error_report("Load state of device %s failed", se->idstr);
2206 void qemu_loadvm_state_cleanup(void)
2210 trace_loadvm_state_cleanup();
2211 QTAILQ_FOREACH(se, &savevm_state.handlers, entry) {
2212 if (se->ops && se->ops->load_cleanup) {
2213 se->ops->load_cleanup(se->opaque);
2218 /* Return true if we should continue the migration, or false. */
2219 static bool postcopy_pause_incoming(MigrationIncomingState *mis)
2221 trace_postcopy_pause_incoming();
2223 /* Clear the triggered bit to allow one recovery */
2224 mis->postcopy_recover_triggered = false;
2226 assert(mis->from_src_file);
2227 qemu_file_shutdown(mis->from_src_file);
2228 qemu_fclose(mis->from_src_file);
2229 mis->from_src_file = NULL;
2231 assert(mis->to_src_file);
2232 qemu_file_shutdown(mis->to_src_file);
2233 qemu_mutex_lock(&mis->rp_mutex);
2234 qemu_fclose(mis->to_src_file);
2235 mis->to_src_file = NULL;
2236 qemu_mutex_unlock(&mis->rp_mutex);
2238 migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
2239 MIGRATION_STATUS_POSTCOPY_PAUSED);
2241 /* Notify the fault thread for the invalidated file handle */
2242 postcopy_fault_thread_notify(mis);
2244 error_report("Detected IO failure for postcopy. "
2245 "Migration paused.");
2247 while (mis->state == MIGRATION_STATUS_POSTCOPY_PAUSED) {
2248 qemu_sem_wait(&mis->postcopy_pause_sem_dst);
2251 trace_postcopy_pause_incoming_continued();
2256 int qemu_loadvm_state_main(QEMUFile *f, MigrationIncomingState *mis)
2258 uint8_t section_type;
2263 section_type = qemu_get_byte(f);
2265 if (qemu_file_get_error(f)) {
2266 ret = qemu_file_get_error(f);
2270 trace_qemu_loadvm_state_section(section_type);
2271 switch (section_type) {
2272 case QEMU_VM_SECTION_START:
2273 case QEMU_VM_SECTION_FULL:
2274 ret = qemu_loadvm_section_start_full(f, mis);
2279 case QEMU_VM_SECTION_PART:
2280 case QEMU_VM_SECTION_END:
2281 ret = qemu_loadvm_section_part_end(f, mis);
2286 case QEMU_VM_COMMAND:
2287 ret = loadvm_process_command(f);
2288 trace_qemu_loadvm_state_section_command(ret);
2289 if ((ret < 0) || (ret & LOADVM_QUIT)) {
2294 /* This is the end of migration */
2297 error_report("Unknown savevm section type %d", section_type);
2305 qemu_file_set_error(f, ret);
2308 * If we are during an active postcopy, then we pause instead
2309 * of bail out to at least keep the VM's dirty data. Note
2310 * that POSTCOPY_INCOMING_LISTENING stage is still not enough,
2311 * during which we're still receiving device states and we
2312 * still haven't yet started the VM on destination.
2314 if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING &&
2315 postcopy_pause_incoming(mis)) {
2316 /* Reset f to point to the newly created channel */
2317 f = mis->from_src_file;
2324 int qemu_loadvm_state(QEMUFile *f)
2326 MigrationIncomingState *mis = migration_incoming_get_current();
2327 Error *local_err = NULL;
2331 if (qemu_savevm_state_blocked(&local_err)) {
2332 error_report_err(local_err);
2336 v = qemu_get_be32(f);
2337 if (v != QEMU_VM_FILE_MAGIC) {
2338 error_report("Not a migration stream");
2342 v = qemu_get_be32(f);
2343 if (v == QEMU_VM_FILE_VERSION_COMPAT) {
2344 error_report("SaveVM v2 format is obsolete and don't work anymore");
2347 if (v != QEMU_VM_FILE_VERSION) {
2348 error_report("Unsupported migration stream version");
2352 if (qemu_loadvm_state_setup(f) != 0) {
2356 if (migrate_get_current()->send_configuration) {
2357 if (qemu_get_byte(f) != QEMU_VM_CONFIGURATION) {
2358 error_report("Configuration section missing");
2359 qemu_loadvm_state_cleanup();
2362 ret = vmstate_load_state(f, &vmstate_configuration, &savevm_state, 0);
2365 qemu_loadvm_state_cleanup();
2370 cpu_synchronize_all_pre_loadvm();
2372 ret = qemu_loadvm_state_main(f, mis);
2373 qemu_event_set(&mis->main_thread_load_event);
2375 trace_qemu_loadvm_state_post_main(ret);
2377 if (mis->have_listen_thread) {
2378 /* Listen thread still going, can't clean up yet */
2383 ret = qemu_file_get_error(f);
2387 * Try to read in the VMDESC section as well, so that dumping tools that
2388 * intercept our migration stream have the chance to see it.
2391 /* We've got to be careful; if we don't read the data and just shut the fd
2392 * then the sender can error if we close while it's still sending.
2393 * We also mustn't read data that isn't there; some transports (RDMA)
2394 * will stall waiting for that data when the source has already closed.
2396 if (ret == 0 && should_send_vmdesc()) {
2399 uint8_t section_type = qemu_get_byte(f);
2401 if (section_type != QEMU_VM_VMDESCRIPTION) {
2402 error_report("Expected vmdescription section, but got %d",
2405 * It doesn't seem worth failing at this point since
2406 * we apparently have an otherwise valid VM state
2409 buf = g_malloc(0x1000);
2410 size = qemu_get_be32(f);
2413 uint32_t read_chunk = MIN(size, 0x1000);
2414 qemu_get_buffer(f, buf, read_chunk);
2421 qemu_loadvm_state_cleanup();
2422 cpu_synchronize_all_post_init();
2427 int qemu_load_device_state(QEMUFile *f)
2429 MigrationIncomingState *mis = migration_incoming_get_current();
2432 /* Load QEMU_VM_SECTION_FULL section */
2433 ret = qemu_loadvm_state_main(f, mis);
2435 error_report("Failed to load device state: %d", ret);
2439 cpu_synchronize_all_post_init();
2443 int save_snapshot(const char *name, Error **errp)
2445 BlockDriverState *bs, *bs1;
2446 QEMUSnapshotInfo sn1, *sn = &sn1, old_sn1, *old_sn = &old_sn1;
2449 int saved_vm_running;
2450 uint64_t vm_state_size;
2453 AioContext *aio_context;
2455 if (!replay_can_snapshot()) {
2456 error_report("Record/replay does not allow making snapshot "
2457 "right now. Try once more later.");
2461 if (!bdrv_all_can_snapshot(&bs)) {
2462 error_setg(errp, "Device '%s' is writable but does not support "
2463 "snapshots", bdrv_get_device_name(bs));
2467 /* Delete old snapshots of the same name */
2469 ret = bdrv_all_delete_snapshot(name, &bs1, errp);
2471 error_prepend(errp, "Error while deleting snapshot on device "
2472 "'%s': ", bdrv_get_device_name(bs1));
2477 bs = bdrv_all_find_vmstate_bs();
2479 error_setg(errp, "No block device can accept snapshots");
2482 aio_context = bdrv_get_aio_context(bs);
2484 saved_vm_running = runstate_is_running();
2486 ret = global_state_store();
2488 error_setg(errp, "Error saving global state");
2491 vm_stop(RUN_STATE_SAVE_VM);
2493 bdrv_drain_all_begin();
2495 aio_context_acquire(aio_context);
2497 memset(sn, 0, sizeof(*sn));
2499 /* fill auxiliary fields */
2500 qemu_gettimeofday(&tv);
2501 sn->date_sec = tv.tv_sec;
2502 sn->date_nsec = tv.tv_usec * 1000;
2503 sn->vm_clock_nsec = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
2506 ret = bdrv_snapshot_find(bs, old_sn, name);
2508 pstrcpy(sn->name, sizeof(sn->name), old_sn->name);
2509 pstrcpy(sn->id_str, sizeof(sn->id_str), old_sn->id_str);
2511 pstrcpy(sn->name, sizeof(sn->name), name);
2514 /* cast below needed for OpenBSD where tv_sec is still 'long' */
2515 localtime_r((const time_t *)&tv.tv_sec, &tm);
2516 strftime(sn->name, sizeof(sn->name), "vm-%Y%m%d%H%M%S", &tm);
2519 /* save the VM state */
2520 f = qemu_fopen_bdrv(bs, 1);
2522 error_setg(errp, "Could not open VM state file");
2525 ret = qemu_savevm_state(f, errp);
2526 vm_state_size = qemu_ftell(f);
2532 /* The bdrv_all_create_snapshot() call that follows acquires the AioContext
2533 * for itself. BDRV_POLL_WHILE() does not support nested locking because
2534 * it only releases the lock once. Therefore synchronous I/O will deadlock
2535 * unless we release the AioContext before bdrv_all_create_snapshot().
2537 aio_context_release(aio_context);
2540 ret = bdrv_all_create_snapshot(sn, bs, vm_state_size, &bs);
2542 error_setg(errp, "Error while creating snapshot on '%s'",
2543 bdrv_get_device_name(bs));
2551 aio_context_release(aio_context);
2554 bdrv_drain_all_end();
2556 if (saved_vm_running) {
2562 void qmp_xen_save_devices_state(const char *filename, bool has_live, bool live,
2566 QIOChannelFile *ioc;
2567 int saved_vm_running;
2571 /* live default to true so old version of Xen tool stack can have a
2572 * successfull live migration */
2576 saved_vm_running = runstate_is_running();
2577 vm_stop(RUN_STATE_SAVE_VM);
2578 global_state_store_running();
2580 ioc = qio_channel_file_new_path(filename, O_WRONLY | O_CREAT, 0660, errp);
2584 qio_channel_set_name(QIO_CHANNEL(ioc), "migration-xen-save-state");
2585 f = qemu_fopen_channel_output(QIO_CHANNEL(ioc));
2586 object_unref(OBJECT(ioc));
2587 ret = qemu_save_device_state(f);
2588 if (ret < 0 || qemu_fclose(f) < 0) {
2589 error_setg(errp, QERR_IO_ERROR);
2591 /* libxl calls the QMP command "stop" before calling
2592 * "xen-save-devices-state" and in case of migration failure, libxl
2593 * would call "cont".
2594 * So call bdrv_inactivate_all (release locks) here to let the other
2595 * side of the migration take controle of the images.
2597 if (live && !saved_vm_running) {
2598 ret = bdrv_inactivate_all();
2600 error_setg(errp, "%s: bdrv_inactivate_all() failed (%d)",
2607 if (saved_vm_running) {
2612 void qmp_xen_load_devices_state(const char *filename, Error **errp)
2615 QIOChannelFile *ioc;
2618 /* Guest must be paused before loading the device state; the RAM state
2619 * will already have been loaded by xc
2621 if (runstate_is_running()) {
2622 error_setg(errp, "Cannot update device state while vm is running");
2625 vm_stop(RUN_STATE_RESTORE_VM);
2627 ioc = qio_channel_file_new_path(filename, O_RDONLY | O_BINARY, 0, errp);
2631 qio_channel_set_name(QIO_CHANNEL(ioc), "migration-xen-load-state");
2632 f = qemu_fopen_channel_input(QIO_CHANNEL(ioc));
2633 object_unref(OBJECT(ioc));
2635 ret = qemu_loadvm_state(f);
2638 error_setg(errp, QERR_IO_ERROR);
2640 migration_incoming_state_destroy();
2643 int load_snapshot(const char *name, Error **errp)
2645 BlockDriverState *bs, *bs_vm_state;
2646 QEMUSnapshotInfo sn;
2649 AioContext *aio_context;
2650 MigrationIncomingState *mis = migration_incoming_get_current();
2652 if (!replay_can_snapshot()) {
2653 error_report("Record/replay does not allow loading snapshot "
2654 "right now. Try once more later.");
2658 if (!bdrv_all_can_snapshot(&bs)) {
2660 "Device '%s' is writable but does not support snapshots",
2661 bdrv_get_device_name(bs));
2664 ret = bdrv_all_find_snapshot(name, &bs);
2667 "Device '%s' does not have the requested snapshot '%s'",
2668 bdrv_get_device_name(bs), name);
2672 bs_vm_state = bdrv_all_find_vmstate_bs();
2674 error_setg(errp, "No block device supports snapshots");
2677 aio_context = bdrv_get_aio_context(bs_vm_state);
2679 /* Don't even try to load empty VM states */
2680 aio_context_acquire(aio_context);
2681 ret = bdrv_snapshot_find(bs_vm_state, &sn, name);
2682 aio_context_release(aio_context);
2685 } else if (sn.vm_state_size == 0) {
2686 error_setg(errp, "This is a disk-only snapshot. Revert to it "
2687 " offline using qemu-img");
2691 /* Flush all IO requests so they don't interfere with the new state. */
2692 bdrv_drain_all_begin();
2694 ret = bdrv_all_goto_snapshot(name, &bs, errp);
2696 error_prepend(errp, "Could not load snapshot '%s' on '%s': ",
2697 name, bdrv_get_device_name(bs));
2701 /* restore the VM state */
2702 f = qemu_fopen_bdrv(bs_vm_state, 0);
2704 error_setg(errp, "Could not open VM state file");
2709 qemu_system_reset(SHUTDOWN_CAUSE_NONE);
2710 mis->from_src_file = f;
2712 aio_context_acquire(aio_context);
2713 ret = qemu_loadvm_state(f);
2714 migration_incoming_state_destroy();
2715 aio_context_release(aio_context);
2717 bdrv_drain_all_end();
2720 error_setg(errp, "Error %d while loading VM state", ret);
2727 bdrv_drain_all_end();
2731 void vmstate_register_ram(MemoryRegion *mr, DeviceState *dev)
2733 qemu_ram_set_idstr(mr->ram_block,
2734 memory_region_name(mr), dev);
2735 qemu_ram_set_migratable(mr->ram_block);
2738 void vmstate_unregister_ram(MemoryRegion *mr, DeviceState *dev)
2740 qemu_ram_unset_idstr(mr->ram_block);
2741 qemu_ram_unset_migratable(mr->ram_block);
2744 void vmstate_register_ram_global(MemoryRegion *mr)
2746 vmstate_register_ram(mr, NULL);
2749 bool vmstate_check_only_migratable(const VMStateDescription *vmsd)
2751 /* check needed if --only-migratable is specified */
2752 if (!migrate_get_current()->only_migratable) {
2756 return !(vmsd && vmsd->unmigratable);