]> Git Repo - qemu.git/blob - hw/ide/ahci.h
9pfs-proxy: tiny cleanups in proxy_pwritev and proxy_preadv
[qemu.git] / hw / ide / ahci.h
1 /*
2  * QEMU AHCI Emulation
3  *
4  * Copyright (c) 2010 [email protected]
5  * Copyright (c) 2010 Roland Elek <[email protected]>
6  * Copyright (c) 2010 Sebastian Herbszt <[email protected]>
7  * Copyright (c) 2010 Alexander Graf <[email protected]>
8  *
9  * This library is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU Lesser General Public
11  * License as published by the Free Software Foundation; either
12  * version 2 of the License, or (at your option) any later version.
13  *
14  * This library is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * Lesser General Public License for more details.
18  *
19  * You should have received a copy of the GNU Lesser General Public
20  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
21  *
22  */
23
24 #ifndef HW_IDE_AHCI_H
25 #define HW_IDE_AHCI_H
26
27 #define AHCI_MEM_BAR_SIZE         0x1000
28 #define AHCI_MAX_PORTS            32
29 #define AHCI_MAX_SG               168 /* hardware max is 64K */
30 #define AHCI_DMA_BOUNDARY         0xffffffff
31 #define AHCI_USE_CLUSTERING       0
32 #define AHCI_MAX_CMDS             32
33 #define AHCI_CMD_SZ               32
34 #define AHCI_CMD_SLOT_SZ          (AHCI_MAX_CMDS * AHCI_CMD_SZ)
35 #define AHCI_RX_FIS_SZ            256
36 #define AHCI_CMD_TBL_CDB          0x40
37 #define AHCI_CMD_TBL_HDR_SZ       0x80
38 #define AHCI_CMD_TBL_SZ           (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
39 #define AHCI_CMD_TBL_AR_SZ        (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
40 #define AHCI_PORT_PRIV_DMA_SZ     (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
41                                    AHCI_RX_FIS_SZ)
42
43 #define AHCI_IRQ_ON_SG            (1U << 31)
44 #define AHCI_CMD_ATAPI            (1 << 5)
45 #define AHCI_CMD_WRITE            (1 << 6)
46 #define AHCI_CMD_PREFETCH         (1 << 7)
47 #define AHCI_CMD_RESET            (1 << 8)
48 #define AHCI_CMD_CLR_BUSY         (1 << 10)
49
50 #define RX_FIS_D2H_REG            0x40 /* offset of D2H Register FIS data */
51 #define RX_FIS_SDB                0x58 /* offset of SDB FIS data */
52 #define RX_FIS_UNK                0x60 /* offset of Unknown FIS data */
53
54 /* global controller registers */
55 #define HOST_CAP                  0x00 /* host capabilities */
56 #define HOST_CTL                  0x04 /* global host control */
57 #define HOST_IRQ_STAT             0x08 /* interrupt status */
58 #define HOST_PORTS_IMPL           0x0c /* bitmap of implemented ports */
59 #define HOST_VERSION              0x10 /* AHCI spec. version compliancy */
60
61 /* HOST_CTL bits */
62 #define HOST_CTL_RESET            (1 << 0)  /* reset controller; self-clear */
63 #define HOST_CTL_IRQ_EN           (1 << 1)  /* global IRQ enable */
64 #define HOST_CTL_AHCI_EN          (1U << 31) /* AHCI enabled */
65
66 /* HOST_CAP bits */
67 #define HOST_CAP_SSC              (1 << 14) /* Slumber capable */
68 #define HOST_CAP_AHCI             (1 << 18) /* AHCI only */
69 #define HOST_CAP_CLO              (1 << 24) /* Command List Override support */
70 #define HOST_CAP_SSS              (1 << 27) /* Staggered Spin-up */
71 #define HOST_CAP_NCQ              (1 << 30) /* Native Command Queueing */
72 #define HOST_CAP_64               (1U << 31) /* PCI DAC (64-bit DMA) support */
73
74 /* registers for each SATA port */
75 #define PORT_LST_ADDR             0x00 /* command list DMA addr */
76 #define PORT_LST_ADDR_HI          0x04 /* command list DMA addr hi */
77 #define PORT_FIS_ADDR             0x08 /* FIS rx buf addr */
78 #define PORT_FIS_ADDR_HI          0x0c /* FIS rx buf addr hi */
79 #define PORT_IRQ_STAT             0x10 /* interrupt status */
80 #define PORT_IRQ_MASK             0x14 /* interrupt enable/disable mask */
81 #define PORT_CMD                  0x18 /* port command */
82 #define PORT_TFDATA               0x20 /* taskfile data */
83 #define PORT_SIG                  0x24 /* device TF signature */
84 #define PORT_SCR_STAT             0x28 /* SATA phy register: SStatus */
85 #define PORT_SCR_CTL              0x2c /* SATA phy register: SControl */
86 #define PORT_SCR_ERR              0x30 /* SATA phy register: SError */
87 #define PORT_SCR_ACT              0x34 /* SATA phy register: SActive */
88 #define PORT_CMD_ISSUE            0x38 /* command issue */
89 #define PORT_RESERVED             0x3c /* reserved */
90
91 /* PORT_IRQ_{STAT,MASK} bits */
92 #define PORT_IRQ_COLD_PRES        (1U << 31) /* cold presence detect */
93 #define PORT_IRQ_TF_ERR           (1 << 30) /* task file error */
94 #define PORT_IRQ_HBUS_ERR         (1 << 29) /* host bus fatal error */
95 #define PORT_IRQ_HBUS_DATA_ERR    (1 << 28) /* host bus data error */
96 #define PORT_IRQ_IF_ERR           (1 << 27) /* interface fatal error */
97 #define PORT_IRQ_IF_NONFATAL      (1 << 26) /* interface non-fatal error */
98 #define PORT_IRQ_OVERFLOW         (1 << 24) /* xfer exhausted available S/G */
99 #define PORT_IRQ_BAD_PMP          (1 << 23) /* incorrect port multiplier */
100
101 #define PORT_IRQ_PHYRDY           (1 << 22) /* PhyRdy changed */
102 #define PORT_IRQ_DEV_ILCK         (1 << 7) /* device interlock */
103 #define PORT_IRQ_CONNECT          (1 << 6) /* port connect change status */
104 #define PORT_IRQ_SG_DONE          (1 << 5) /* descriptor processed */
105 #define PORT_IRQ_UNK_FIS          (1 << 4) /* unknown FIS rx'd */
106 #define PORT_IRQ_SDB_FIS          (1 << 3) /* Set Device Bits FIS rx'd */
107 #define PORT_IRQ_DMAS_FIS         (1 << 2) /* DMA Setup FIS rx'd */
108 #define PORT_IRQ_PIOS_FIS         (1 << 1) /* PIO Setup FIS rx'd */
109 #define PORT_IRQ_D2H_REG_FIS      (1 << 0) /* D2H Register FIS rx'd */
110
111 #define PORT_IRQ_FREEZE           (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR |   \
112                                    PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY |    \
113                                    PORT_IRQ_UNK_FIS)
114 #define PORT_IRQ_ERROR            (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR |     \
115                                    PORT_IRQ_HBUS_DATA_ERR)
116 #define DEF_PORT_IRQ              (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |     \
117                                    PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |  \
118                                    PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
119
120 /* PORT_CMD bits */
121 #define PORT_CMD_ATAPI            (1 << 24) /* Device is ATAPI */
122 #define PORT_CMD_LIST_ON          (1 << 15) /* cmd list DMA engine running */
123 #define PORT_CMD_FIS_ON           (1 << 14) /* FIS DMA engine running */
124 #define PORT_CMD_FIS_RX           (1 << 4) /* Enable FIS receive DMA engine */
125 #define PORT_CMD_CLO              (1 << 3) /* Command list override */
126 #define PORT_CMD_POWER_ON         (1 << 2) /* Power up device */
127 #define PORT_CMD_SPIN_UP          (1 << 1) /* Spin up device */
128 #define PORT_CMD_START            (1 << 0) /* Enable port DMA engine */
129
130 #define PORT_CMD_ICC_MASK         (0xf << 28) /* i/f ICC state mask */
131 #define PORT_CMD_ICC_ACTIVE       (0x1 << 28) /* Put i/f in active state */
132 #define PORT_CMD_ICC_PARTIAL      (0x2 << 28) /* Put i/f in partial state */
133 #define PORT_CMD_ICC_SLUMBER      (0x6 << 28) /* Put i/f in slumber state */
134
135 /* ap->flags bits */
136 #define AHCI_FLAG_NO_NCQ                  (1 << 24)
137 #define AHCI_FLAG_IGN_IRQ_IF_ERR          (1 << 25) /* ignore IRQ_IF_ERR */
138 #define AHCI_FLAG_HONOR_PI                (1 << 26) /* honor PORTS_IMPL */
139 #define AHCI_FLAG_IGN_SERR_INTERNAL       (1 << 27) /* ignore SERR_INTERNAL */
140 #define AHCI_FLAG_32BIT_ONLY              (1 << 28) /* force 32bit */
141
142 #define ATA_SRST                          (1 << 2)  /* software reset */
143
144 #define STATE_RUN                         0
145 #define STATE_RESET                       1
146
147 #define SATA_SCR_SSTATUS_DET_NODEV        0x0
148 #define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
149
150 #define SATA_SCR_SSTATUS_SPD_NODEV        0x00
151 #define SATA_SCR_SSTATUS_SPD_GEN1         0x10
152
153 #define SATA_SCR_SSTATUS_IPM_NODEV        0x000
154 #define SATA_SCR_SSTATUS_IPM_ACTIVE       0X100
155
156 #define AHCI_SCR_SCTL_DET                 0xf
157
158 #define SATA_FIS_TYPE_REGISTER_H2D        0x27
159 #define   SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
160 #define SATA_FIS_TYPE_REGISTER_D2H        0x34
161 #define SATA_FIS_TYPE_PIO_SETUP           0x5f
162 #define SATA_FIS_TYPE_SDB                 0xA1
163
164 #define AHCI_CMD_HDR_CMD_FIS_LEN           0x1f
165 #define AHCI_CMD_HDR_PRDT_LEN              16
166
167 #define SATA_SIGNATURE_CDROM               0xeb140000
168 #define SATA_SIGNATURE_DISK                0x00000101
169
170 #define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
171                                             /* Shouldn't this be 0x2c? */
172
173 #define AHCI_PORT_REGS_START_ADDR          0x100
174 #define AHCI_PORT_ADDR_OFFSET_MASK         0x7f
175 #define AHCI_PORT_ADDR_OFFSET_LEN          0x80
176
177 #define AHCI_NUM_COMMAND_SLOTS             31
178 #define AHCI_SUPPORTED_SPEED               20
179 #define AHCI_SUPPORTED_SPEED_GEN1          1
180 #define AHCI_VERSION_1_0                   0x10000
181
182 #define AHCI_PROGMODE_MAJOR_REV_1          1
183
184 #define AHCI_COMMAND_TABLE_ACMD            0x40
185
186 #define AHCI_PRDT_SIZE_MASK                0x3fffff
187
188 #define IDE_FEATURE_DMA                    1
189
190 #define READ_FPDMA_QUEUED                  0x60
191 #define WRITE_FPDMA_QUEUED                 0x61
192 #define NCQ_NON_DATA                       0x63
193 #define RECEIVE_FPDMA_QUEUED               0x65
194 #define SEND_FPDMA_QUEUED                  0x64
195
196 #define RES_FIS_DSFIS                      0x00
197 #define RES_FIS_PSFIS                      0x20
198 #define RES_FIS_RFIS                       0x40
199 #define RES_FIS_SDBFIS                     0x58
200 #define RES_FIS_UFIS                       0x60
201
202 #define SATA_CAP_SIZE           0x8
203 #define SATA_CAP_REV            0x2
204 #define SATA_CAP_BAR            0x4
205
206 typedef struct AHCIControlRegs {
207     uint32_t    cap;
208     uint32_t    ghc;
209     uint32_t    irqstatus;
210     uint32_t    impl;
211     uint32_t    version;
212 } AHCIControlRegs;
213
214 typedef struct AHCIPortRegs {
215     uint32_t    lst_addr;
216     uint32_t    lst_addr_hi;
217     uint32_t    fis_addr;
218     uint32_t    fis_addr_hi;
219     uint32_t    irq_stat;
220     uint32_t    irq_mask;
221     uint32_t    cmd;
222     uint32_t    unused0;
223     uint32_t    tfdata;
224     uint32_t    sig;
225     uint32_t    scr_stat;
226     uint32_t    scr_ctl;
227     uint32_t    scr_err;
228     uint32_t    scr_act;
229     uint32_t    cmd_issue;
230     uint32_t    reserved;
231 } AHCIPortRegs;
232
233 typedef struct AHCICmdHdr {
234     uint32_t    opts;
235     uint32_t    status;
236     uint64_t    tbl_addr;
237     uint32_t    reserved[4];
238 } QEMU_PACKED AHCICmdHdr;
239
240 typedef struct AHCI_SG {
241     uint64_t    addr;
242     uint32_t    reserved;
243     uint32_t    flags_size;
244 } QEMU_PACKED AHCI_SG;
245
246 typedef struct AHCIDevice AHCIDevice;
247
248 typedef struct NCQTransferState {
249     AHCIDevice *drive;
250     BlockAIOCB *aiocb;
251     QEMUSGList sglist;
252     BlockAcctCookie acct;
253     uint16_t sector_count;
254     uint64_t lba;
255     uint8_t tag;
256     int slot;
257     int used;
258 } NCQTransferState;
259
260 struct AHCIDevice {
261     IDEDMA dma;
262     IDEBus port;
263     int port_no;
264     uint32_t port_state;
265     uint32_t finished;
266     AHCIPortRegs port_regs;
267     struct AHCIState *hba;
268     QEMUBH *check_bh;
269     uint8_t *lst;
270     uint8_t *res_fis;
271     bool done_atapi_packet;
272     int32_t busy_slot;
273     bool init_d2h_sent;
274     AHCICmdHdr *cur_cmd;
275     NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
276 };
277
278 typedef struct AHCIState {
279     AHCIDevice *dev;
280     AHCIControlRegs control_regs;
281     MemoryRegion mem;
282     MemoryRegion idp;       /* Index-Data Pair I/O port space */
283     unsigned idp_offset;    /* Offset of index in I/O port space */
284     uint32_t idp_index;     /* Current IDP index */
285     int32_t ports;
286     qemu_irq irq;
287     AddressSpace *as;
288 } AHCIState;
289
290 typedef struct AHCIPCIState {
291     /*< private >*/
292     PCIDevice parent_obj;
293     /*< public >*/
294
295     AHCIState ahci;
296 } AHCIPCIState;
297
298 #define TYPE_ICH9_AHCI "ich9-ahci"
299
300 #define ICH_AHCI(obj) \
301     OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
302
303 extern const VMStateDescription vmstate_ahci;
304
305 #define VMSTATE_AHCI(_field, _state) {                               \
306     .name       = (stringify(_field)),                               \
307     .size       = sizeof(AHCIState),                                 \
308     .vmsd       = &vmstate_ahci,                                     \
309     .flags      = VMS_STRUCT,                                        \
310     .offset     = vmstate_offset_value(_state, _field, AHCIState),   \
311 }
312
313 typedef struct NCQFrame {
314     uint8_t fis_type;
315     uint8_t c;
316     uint8_t command;
317     uint8_t sector_count_low;
318     uint8_t lba0;
319     uint8_t lba1;
320     uint8_t lba2;
321     uint8_t fua;
322     uint8_t lba3;
323     uint8_t lba4;
324     uint8_t lba5;
325     uint8_t sector_count_high;
326     uint8_t tag;
327     uint8_t reserved5;
328     uint8_t reserved6;
329     uint8_t control;
330     uint8_t reserved7;
331     uint8_t reserved8;
332     uint8_t reserved9;
333     uint8_t reserved10;
334 } QEMU_PACKED NCQFrame;
335
336 typedef struct SDBFIS {
337     uint8_t type;
338     uint8_t flags;
339     uint8_t status;
340     uint8_t error;
341     uint32_t payload;
342 } QEMU_PACKED SDBFIS;
343
344 void ahci_init(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
345 void ahci_uninit(AHCIState *s);
346
347 void ahci_reset(AHCIState *s);
348
349 void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd);
350
351 #endif /* HW_IDE_AHCI_H */
This page took 0.043483 seconds and 4 git commands to generate.