2 * Block driver for RAW files (posix)
4 * Copyright (c) 2006 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "qemu-common.h"
25 #include "qemu/timer.h"
27 #include "block/block_int.h"
28 #include "qemu/module.h"
30 #include "block/thread-pool.h"
34 #if defined(__APPLE__) && (__MACH__)
36 #include <sys/param.h>
37 #include <IOKit/IOKitLib.h>
38 #include <IOKit/IOBSD.h>
39 #include <IOKit/storage/IOMediaBSDClient.h>
40 #include <IOKit/storage/IOMedia.h>
41 #include <IOKit/storage/IOCDMedia.h>
42 //#include <IOKit/storage/IOCDTypes.h>
43 #include <CoreFoundation/CoreFoundation.h>
47 #define _POSIX_PTHREAD_SEMANTICS 1
51 #include <sys/types.h>
53 #include <sys/ioctl.h>
54 #include <sys/param.h>
55 #include <linux/cdrom.h>
59 #define FS_NOCOW_FL 0x00800000 /* Do not cow file */
63 #include <linux/fiemap.h>
65 #ifdef CONFIG_FALLOCATE_PUNCH_HOLE
66 #include <linux/falloc.h>
68 #if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
74 #include <sys/ioctl.h>
75 #include <sys/disklabel.h>
80 #include <sys/ioctl.h>
81 #include <sys/disklabel.h>
87 #include <sys/ioctl.h>
88 #include <sys/diskslice.h>
95 //#define DEBUG_FLOPPY
98 #if defined(DEBUG_BLOCK)
99 #define DEBUG_BLOCK_PRINT(formatCstr, ...) do { if (qemu_log_enabled()) \
100 { qemu_log(formatCstr, ## __VA_ARGS__); qemu_log_flush(); } } while (0)
102 #define DEBUG_BLOCK_PRINT(formatCstr, ...)
105 /* OS X does not have O_DSYNC */
108 #define O_DSYNC O_SYNC
109 #elif defined(O_FSYNC)
110 #define O_DSYNC O_FSYNC
114 /* Approximate O_DIRECT with O_DSYNC if O_DIRECT isn't available */
116 #define O_DIRECT O_DSYNC
123 /* if the FD is not accessed during that time (in ns), we try to
124 reopen it to see if the disk has been changed */
125 #define FD_OPEN_TIMEOUT (1000000000)
127 #define MAX_BLOCKSIZE 4096
129 typedef struct BDRVRawState {
135 #if defined(__linux__)
136 /* linux floppy specific */
137 int64_t fd_open_time;
138 int64_t fd_error_time;
140 int fd_media_changed;
142 #ifdef CONFIG_LINUX_AIO
150 bool has_write_zeroes:1;
151 bool discard_zeroes:1;
157 typedef struct BDRVRawReopenState {
160 #ifdef CONFIG_LINUX_AIO
163 } BDRVRawReopenState;
165 static int fd_open(BlockDriverState *bs);
166 static int64_t raw_getlength(BlockDriverState *bs);
168 typedef struct RawPosixAIOData {
169 BlockDriverState *bs;
172 struct iovec *aio_iov;
177 #define aio_ioctl_cmd aio_nbytes /* for QEMU_AIO_IOCTL */
182 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
183 static int cdrom_reopen(BlockDriverState *bs);
186 #if defined(__NetBSD__)
187 static int raw_normalize_devicepath(const char **filename)
189 static char namebuf[PATH_MAX];
190 const char *dp, *fname;
194 dp = strrchr(fname, '/');
195 if (lstat(fname, &sb) < 0) {
196 fprintf(stderr, "%s: stat failed: %s\n",
197 fname, strerror(errno));
201 if (!S_ISBLK(sb.st_mode)) {
206 snprintf(namebuf, PATH_MAX, "r%s", fname);
208 snprintf(namebuf, PATH_MAX, "%.*s/r%s",
209 (int)(dp - fname), fname, dp + 1);
211 fprintf(stderr, "%s is a block device", fname);
213 fprintf(stderr, ", using %s\n", *filename);
218 static int raw_normalize_devicepath(const char **filename)
224 static void raw_probe_alignment(BlockDriverState *bs, int fd, Error **errp)
226 BDRVRawState *s = bs->opaque;
228 unsigned int sector_size;
230 /* For /dev/sg devices the alignment is not really used.
231 With buffered I/O, we don't have any restrictions. */
232 if (bs->sg || !(s->open_flags & O_DIRECT)) {
233 bs->request_alignment = 1;
238 /* Try a few ioctls to get the right size */
239 bs->request_alignment = 0;
243 if (ioctl(fd, BLKSSZGET, §or_size) >= 0) {
244 bs->request_alignment = sector_size;
247 #ifdef DKIOCGETBLOCKSIZE
248 if (ioctl(fd, DKIOCGETBLOCKSIZE, §or_size) >= 0) {
249 bs->request_alignment = sector_size;
252 #ifdef DIOCGSECTORSIZE
253 if (ioctl(fd, DIOCGSECTORSIZE, §or_size) >= 0) {
254 bs->request_alignment = sector_size;
260 if (xfsctl(NULL, fd, XFS_IOC_DIOINFO, &da) >= 0) {
261 bs->request_alignment = da.d_miniosz;
262 /* The kernel returns wrong information for d_mem */
263 /* s->buf_align = da.d_mem; */
268 /* If we could not get the sizes so far, we can only guess them */
271 buf = qemu_memalign(MAX_BLOCKSIZE, 2 * MAX_BLOCKSIZE);
272 for (align = 512; align <= MAX_BLOCKSIZE; align <<= 1) {
273 if (pread(fd, buf + align, MAX_BLOCKSIZE, 0) >= 0) {
274 s->buf_align = align;
281 if (!bs->request_alignment) {
283 buf = qemu_memalign(s->buf_align, MAX_BLOCKSIZE);
284 for (align = 512; align <= MAX_BLOCKSIZE; align <<= 1) {
285 if (pread(fd, buf, align, 0) >= 0) {
286 bs->request_alignment = align;
293 if (!s->buf_align || !bs->request_alignment) {
294 error_setg(errp, "Could not find working O_DIRECT alignment. "
295 "Try cache.direct=off.");
299 static void raw_parse_flags(int bdrv_flags, int *open_flags)
301 assert(open_flags != NULL);
303 *open_flags |= O_BINARY;
304 *open_flags &= ~O_ACCMODE;
305 if (bdrv_flags & BDRV_O_RDWR) {
306 *open_flags |= O_RDWR;
308 *open_flags |= O_RDONLY;
311 /* Use O_DSYNC for write-through caching, no flags for write-back caching,
312 * and O_DIRECT for no caching. */
313 if ((bdrv_flags & BDRV_O_NOCACHE)) {
314 *open_flags |= O_DIRECT;
318 static void raw_detach_aio_context(BlockDriverState *bs)
320 #ifdef CONFIG_LINUX_AIO
321 BDRVRawState *s = bs->opaque;
324 laio_detach_aio_context(s->aio_ctx, bdrv_get_aio_context(bs));
329 static void raw_attach_aio_context(BlockDriverState *bs,
330 AioContext *new_context)
332 #ifdef CONFIG_LINUX_AIO
333 BDRVRawState *s = bs->opaque;
336 laio_attach_aio_context(s->aio_ctx, new_context);
341 #ifdef CONFIG_LINUX_AIO
342 static int raw_set_aio(void **aio_ctx, int *use_aio, int bdrv_flags)
345 assert(aio_ctx != NULL);
346 assert(use_aio != NULL);
348 * Currently Linux do AIO only for files opened with O_DIRECT
349 * specified so check NOCACHE flag too
351 if ((bdrv_flags & (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) ==
352 (BDRV_O_NOCACHE|BDRV_O_NATIVE_AIO)) {
354 /* if non-NULL, laio_init() has already been run */
355 if (*aio_ctx == NULL) {
356 *aio_ctx = laio_init();
373 static void raw_parse_filename(const char *filename, QDict *options,
376 /* The filename does not have to be prefixed by the protocol name, since
377 * "file" is the default protocol; therefore, the return value of this
378 * function call can be ignored. */
379 strstart(filename, "file:", &filename);
381 qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
384 static QemuOptsList raw_runtime_opts = {
386 .head = QTAILQ_HEAD_INITIALIZER(raw_runtime_opts.head),
390 .type = QEMU_OPT_STRING,
391 .help = "File name of the image",
393 { /* end of list */ }
397 static int raw_open_common(BlockDriverState *bs, QDict *options,
398 int bdrv_flags, int open_flags, Error **errp)
400 BDRVRawState *s = bs->opaque;
402 Error *local_err = NULL;
403 const char *filename = NULL;
407 opts = qemu_opts_create(&raw_runtime_opts, NULL, 0, &error_abort);
408 qemu_opts_absorb_qdict(opts, options, &local_err);
410 error_propagate(errp, local_err);
415 filename = qemu_opt_get(opts, "filename");
417 ret = raw_normalize_devicepath(&filename);
419 error_setg_errno(errp, -ret, "Could not normalize device path");
423 s->open_flags = open_flags;
424 raw_parse_flags(bdrv_flags, &s->open_flags);
427 fd = qemu_open(filename, s->open_flags, 0644);
437 #ifdef CONFIG_LINUX_AIO
438 if (raw_set_aio(&s->aio_ctx, &s->use_aio, bdrv_flags)) {
441 error_setg_errno(errp, -ret, "Could not set AIO state");
446 s->has_discard = true;
447 s->has_write_zeroes = true;
449 if (fstat(s->fd, &st) < 0) {
450 error_setg_errno(errp, errno, "Could not stat file");
453 if (S_ISREG(st.st_mode)) {
454 s->discard_zeroes = true;
456 if (S_ISBLK(st.st_mode)) {
457 #ifdef BLKDISCARDZEROES
459 if (ioctl(s->fd, BLKDISCARDZEROES, &arg) == 0 && arg) {
460 s->discard_zeroes = true;
464 /* On Linux 3.10, BLKDISCARD leaves stale data in the page cache. Do
465 * not rely on the contents of discarded blocks unless using O_DIRECT.
466 * Same for BLKZEROOUT.
468 if (!(bs->open_flags & BDRV_O_NOCACHE)) {
469 s->discard_zeroes = false;
470 s->has_write_zeroes = false;
476 if (platform_test_xfs_fd(s->fd)) {
481 raw_attach_aio_context(bs, bdrv_get_aio_context(bs));
485 if (filename && (bdrv_flags & BDRV_O_TEMPORARY)) {
492 static int raw_open(BlockDriverState *bs, QDict *options, int flags,
495 BDRVRawState *s = bs->opaque;
496 Error *local_err = NULL;
499 s->type = FTYPE_FILE;
500 ret = raw_open_common(bs, options, flags, 0, &local_err);
502 error_propagate(errp, local_err);
507 static int raw_reopen_prepare(BDRVReopenState *state,
508 BlockReopenQueue *queue, Error **errp)
511 BDRVRawReopenState *raw_s;
513 Error *local_err = NULL;
515 assert(state != NULL);
516 assert(state->bs != NULL);
518 s = state->bs->opaque;
520 state->opaque = g_new0(BDRVRawReopenState, 1);
521 raw_s = state->opaque;
523 #ifdef CONFIG_LINUX_AIO
524 raw_s->use_aio = s->use_aio;
526 /* we can use s->aio_ctx instead of a copy, because the use_aio flag is
527 * valid in the 'false' condition even if aio_ctx is set, and raw_set_aio()
528 * won't override aio_ctx if aio_ctx is non-NULL */
529 if (raw_set_aio(&s->aio_ctx, &raw_s->use_aio, state->flags)) {
530 error_setg(errp, "Could not set AIO state");
535 if (s->type == FTYPE_FD || s->type == FTYPE_CD) {
536 raw_s->open_flags |= O_NONBLOCK;
539 raw_parse_flags(state->flags, &raw_s->open_flags);
543 int fcntl_flags = O_APPEND | O_NONBLOCK;
545 fcntl_flags |= O_NOATIME;
549 /* Not all operating systems have O_ASYNC, and those that don't
550 * will not let us track the state into raw_s->open_flags (typically
551 * you achieve the same effect with an ioctl, for example I_SETSIG
552 * on Solaris). But we do not use O_ASYNC, so that's fine.
554 assert((s->open_flags & O_ASYNC) == 0);
557 if ((raw_s->open_flags & ~fcntl_flags) == (s->open_flags & ~fcntl_flags)) {
558 /* dup the original fd */
559 /* TODO: use qemu fcntl wrapper */
560 #ifdef F_DUPFD_CLOEXEC
561 raw_s->fd = fcntl(s->fd, F_DUPFD_CLOEXEC, 0);
563 raw_s->fd = dup(s->fd);
564 if (raw_s->fd != -1) {
565 qemu_set_cloexec(raw_s->fd);
568 if (raw_s->fd >= 0) {
569 ret = fcntl_setfl(raw_s->fd, raw_s->open_flags);
571 qemu_close(raw_s->fd);
577 /* If we cannot use fcntl, or fcntl failed, fall back to qemu_open() */
578 if (raw_s->fd == -1) {
579 assert(!(raw_s->open_flags & O_CREAT));
580 raw_s->fd = qemu_open(state->bs->filename, raw_s->open_flags);
581 if (raw_s->fd == -1) {
582 error_setg_errno(errp, errno, "Could not reopen file");
587 /* Fail already reopen_prepare() if we can't get a working O_DIRECT
588 * alignment with the new fd. */
589 if (raw_s->fd != -1) {
590 raw_probe_alignment(state->bs, raw_s->fd, &local_err);
592 qemu_close(raw_s->fd);
594 error_propagate(errp, local_err);
602 static void raw_reopen_commit(BDRVReopenState *state)
604 BDRVRawReopenState *raw_s = state->opaque;
605 BDRVRawState *s = state->bs->opaque;
607 s->open_flags = raw_s->open_flags;
611 #ifdef CONFIG_LINUX_AIO
612 s->use_aio = raw_s->use_aio;
615 g_free(state->opaque);
616 state->opaque = NULL;
620 static void raw_reopen_abort(BDRVReopenState *state)
622 BDRVRawReopenState *raw_s = state->opaque;
624 /* nothing to do if NULL, we didn't get far enough */
629 if (raw_s->fd >= 0) {
630 qemu_close(raw_s->fd);
633 g_free(state->opaque);
634 state->opaque = NULL;
637 static void raw_refresh_limits(BlockDriverState *bs, Error **errp)
639 BDRVRawState *s = bs->opaque;
641 raw_probe_alignment(bs, s->fd, errp);
642 bs->bl.opt_mem_alignment = s->buf_align;
645 static ssize_t handle_aiocb_ioctl(RawPosixAIOData *aiocb)
649 ret = ioctl(aiocb->aio_fildes, aiocb->aio_ioctl_cmd, aiocb->aio_ioctl_buf);
657 static ssize_t handle_aiocb_flush(RawPosixAIOData *aiocb)
661 ret = qemu_fdatasync(aiocb->aio_fildes);
670 static bool preadv_present = true;
673 qemu_preadv(int fd, const struct iovec *iov, int nr_iov, off_t offset)
675 return preadv(fd, iov, nr_iov, offset);
679 qemu_pwritev(int fd, const struct iovec *iov, int nr_iov, off_t offset)
681 return pwritev(fd, iov, nr_iov, offset);
686 static bool preadv_present = false;
689 qemu_preadv(int fd, const struct iovec *iov, int nr_iov, off_t offset)
695 qemu_pwritev(int fd, const struct iovec *iov, int nr_iov, off_t offset)
702 static ssize_t handle_aiocb_rw_vector(RawPosixAIOData *aiocb)
707 if (aiocb->aio_type & QEMU_AIO_WRITE)
708 len = qemu_pwritev(aiocb->aio_fildes,
713 len = qemu_preadv(aiocb->aio_fildes,
717 } while (len == -1 && errno == EINTR);
726 * Read/writes the data to/from a given linear buffer.
728 * Returns the number of bytes handles or -errno in case of an error. Short
729 * reads are only returned if the end of the file is reached.
731 static ssize_t handle_aiocb_rw_linear(RawPosixAIOData *aiocb, char *buf)
736 while (offset < aiocb->aio_nbytes) {
737 if (aiocb->aio_type & QEMU_AIO_WRITE) {
738 len = pwrite(aiocb->aio_fildes,
739 (const char *)buf + offset,
740 aiocb->aio_nbytes - offset,
741 aiocb->aio_offset + offset);
743 len = pread(aiocb->aio_fildes,
745 aiocb->aio_nbytes - offset,
746 aiocb->aio_offset + offset);
748 if (len == -1 && errno == EINTR) {
750 } else if (len == -1) {
753 } else if (len == 0) {
762 static ssize_t handle_aiocb_rw(RawPosixAIOData *aiocb)
767 if (!(aiocb->aio_type & QEMU_AIO_MISALIGNED)) {
769 * If there is just a single buffer, and it is properly aligned
770 * we can just use plain pread/pwrite without any problems.
772 if (aiocb->aio_niov == 1) {
773 return handle_aiocb_rw_linear(aiocb, aiocb->aio_iov->iov_base);
776 * We have more than one iovec, and all are properly aligned.
778 * Try preadv/pwritev first and fall back to linearizing the
779 * buffer if it's not supported.
781 if (preadv_present) {
782 nbytes = handle_aiocb_rw_vector(aiocb);
783 if (nbytes == aiocb->aio_nbytes ||
784 (nbytes < 0 && nbytes != -ENOSYS)) {
787 preadv_present = false;
791 * XXX(hch): short read/write. no easy way to handle the reminder
792 * using these interfaces. For now retry using plain
798 * Ok, we have to do it the hard way, copy all segments into
799 * a single aligned buffer.
801 buf = qemu_try_blockalign(aiocb->bs, aiocb->aio_nbytes);
806 if (aiocb->aio_type & QEMU_AIO_WRITE) {
810 for (i = 0; i < aiocb->aio_niov; ++i) {
811 memcpy(p, aiocb->aio_iov[i].iov_base, aiocb->aio_iov[i].iov_len);
812 p += aiocb->aio_iov[i].iov_len;
814 assert(p - buf == aiocb->aio_nbytes);
817 nbytes = handle_aiocb_rw_linear(aiocb, buf);
818 if (!(aiocb->aio_type & QEMU_AIO_WRITE)) {
820 size_t count = aiocb->aio_nbytes, copy;
823 for (i = 0; i < aiocb->aio_niov && count; ++i) {
825 if (copy > aiocb->aio_iov[i].iov_len) {
826 copy = aiocb->aio_iov[i].iov_len;
828 memcpy(aiocb->aio_iov[i].iov_base, p, copy);
829 assert(count >= copy);
841 static int xfs_write_zeroes(BDRVRawState *s, int64_t offset, uint64_t bytes)
843 struct xfs_flock64 fl;
845 memset(&fl, 0, sizeof(fl));
846 fl.l_whence = SEEK_SET;
850 if (xfsctl(NULL, s->fd, XFS_IOC_ZERO_RANGE, &fl) < 0) {
851 DEBUG_BLOCK_PRINT("cannot write zero range (%s)\n", strerror(errno));
858 static int xfs_discard(BDRVRawState *s, int64_t offset, uint64_t bytes)
860 struct xfs_flock64 fl;
862 memset(&fl, 0, sizeof(fl));
863 fl.l_whence = SEEK_SET;
867 if (xfsctl(NULL, s->fd, XFS_IOC_UNRESVSP64, &fl) < 0) {
868 DEBUG_BLOCK_PRINT("cannot punch hole (%s)\n", strerror(errno));
876 static ssize_t handle_aiocb_write_zeroes(RawPosixAIOData *aiocb)
878 int ret = -EOPNOTSUPP;
879 BDRVRawState *s = aiocb->bs->opaque;
881 if (s->has_write_zeroes == 0) {
885 if (aiocb->aio_type & QEMU_AIO_BLKDEV) {
888 uint64_t range[2] = { aiocb->aio_offset, aiocb->aio_nbytes };
889 if (ioctl(aiocb->aio_fildes, BLKZEROOUT, range) == 0) {
892 } while (errno == EINTR);
899 return xfs_write_zeroes(s, aiocb->aio_offset, aiocb->aio_nbytes);
904 if (ret == -ENODEV || ret == -ENOSYS || ret == -EOPNOTSUPP ||
906 s->has_write_zeroes = false;
912 static ssize_t handle_aiocb_discard(RawPosixAIOData *aiocb)
914 int ret = -EOPNOTSUPP;
915 BDRVRawState *s = aiocb->bs->opaque;
917 if (!s->has_discard) {
921 if (aiocb->aio_type & QEMU_AIO_BLKDEV) {
924 uint64_t range[2] = { aiocb->aio_offset, aiocb->aio_nbytes };
925 if (ioctl(aiocb->aio_fildes, BLKDISCARD, range) == 0) {
928 } while (errno == EINTR);
935 return xfs_discard(s, aiocb->aio_offset, aiocb->aio_nbytes);
939 #ifdef CONFIG_FALLOCATE_PUNCH_HOLE
941 if (fallocate(s->fd, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE,
942 aiocb->aio_offset, aiocb->aio_nbytes) == 0) {
945 } while (errno == EINTR);
951 if (ret == -ENODEV || ret == -ENOSYS || ret == -EOPNOTSUPP ||
953 s->has_discard = false;
959 static int aio_worker(void *arg)
961 RawPosixAIOData *aiocb = arg;
964 switch (aiocb->aio_type & QEMU_AIO_TYPE_MASK) {
966 ret = handle_aiocb_rw(aiocb);
967 if (ret >= 0 && ret < aiocb->aio_nbytes && aiocb->bs->growable) {
968 iov_memset(aiocb->aio_iov, aiocb->aio_niov, ret,
969 0, aiocb->aio_nbytes - ret);
971 ret = aiocb->aio_nbytes;
973 if (ret == aiocb->aio_nbytes) {
975 } else if (ret >= 0 && ret < aiocb->aio_nbytes) {
980 ret = handle_aiocb_rw(aiocb);
981 if (ret == aiocb->aio_nbytes) {
983 } else if (ret >= 0 && ret < aiocb->aio_nbytes) {
988 ret = handle_aiocb_flush(aiocb);
991 ret = handle_aiocb_ioctl(aiocb);
993 case QEMU_AIO_DISCARD:
994 ret = handle_aiocb_discard(aiocb);
996 case QEMU_AIO_WRITE_ZEROES:
997 ret = handle_aiocb_write_zeroes(aiocb);
1000 fprintf(stderr, "invalid aio request (0x%x)\n", aiocb->aio_type);
1005 g_slice_free(RawPosixAIOData, aiocb);
1009 static int paio_submit_co(BlockDriverState *bs, int fd,
1010 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
1013 RawPosixAIOData *acb = g_slice_new(RawPosixAIOData);
1017 acb->aio_type = type;
1018 acb->aio_fildes = fd;
1020 acb->aio_nbytes = nb_sectors * BDRV_SECTOR_SIZE;
1021 acb->aio_offset = sector_num * BDRV_SECTOR_SIZE;
1024 acb->aio_iov = qiov->iov;
1025 acb->aio_niov = qiov->niov;
1026 assert(qiov->size == acb->aio_nbytes);
1029 trace_paio_submit_co(sector_num, nb_sectors, type);
1030 pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
1031 return thread_pool_submit_co(pool, aio_worker, acb);
1034 static BlockDriverAIOCB *paio_submit(BlockDriverState *bs, int fd,
1035 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
1036 BlockDriverCompletionFunc *cb, void *opaque, int type)
1038 RawPosixAIOData *acb = g_slice_new(RawPosixAIOData);
1042 acb->aio_type = type;
1043 acb->aio_fildes = fd;
1045 acb->aio_nbytes = nb_sectors * BDRV_SECTOR_SIZE;
1046 acb->aio_offset = sector_num * BDRV_SECTOR_SIZE;
1049 acb->aio_iov = qiov->iov;
1050 acb->aio_niov = qiov->niov;
1051 assert(qiov->size == acb->aio_nbytes);
1054 trace_paio_submit(acb, opaque, sector_num, nb_sectors, type);
1055 pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
1056 return thread_pool_submit_aio(pool, aio_worker, acb, cb, opaque);
1059 static BlockDriverAIOCB *raw_aio_submit(BlockDriverState *bs,
1060 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
1061 BlockDriverCompletionFunc *cb, void *opaque, int type)
1063 BDRVRawState *s = bs->opaque;
1065 if (fd_open(bs) < 0)
1069 * If O_DIRECT is used the buffer needs to be aligned on a sector
1070 * boundary. Check if this is the case or tell the low-level
1071 * driver that it needs to copy the buffer.
1073 if ((bs->open_flags & BDRV_O_NOCACHE)) {
1074 if (!bdrv_qiov_is_aligned(bs, qiov)) {
1075 type |= QEMU_AIO_MISALIGNED;
1076 #ifdef CONFIG_LINUX_AIO
1077 } else if (s->use_aio) {
1078 return laio_submit(bs, s->aio_ctx, s->fd, sector_num, qiov,
1079 nb_sectors, cb, opaque, type);
1084 return paio_submit(bs, s->fd, sector_num, qiov, nb_sectors,
1088 static void raw_aio_plug(BlockDriverState *bs)
1090 #ifdef CONFIG_LINUX_AIO
1091 BDRVRawState *s = bs->opaque;
1093 laio_io_plug(bs, s->aio_ctx);
1098 static void raw_aio_unplug(BlockDriverState *bs)
1100 #ifdef CONFIG_LINUX_AIO
1101 BDRVRawState *s = bs->opaque;
1103 laio_io_unplug(bs, s->aio_ctx, true);
1108 static void raw_aio_flush_io_queue(BlockDriverState *bs)
1110 #ifdef CONFIG_LINUX_AIO
1111 BDRVRawState *s = bs->opaque;
1113 laio_io_unplug(bs, s->aio_ctx, false);
1118 static BlockDriverAIOCB *raw_aio_readv(BlockDriverState *bs,
1119 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
1120 BlockDriverCompletionFunc *cb, void *opaque)
1122 return raw_aio_submit(bs, sector_num, qiov, nb_sectors,
1123 cb, opaque, QEMU_AIO_READ);
1126 static BlockDriverAIOCB *raw_aio_writev(BlockDriverState *bs,
1127 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
1128 BlockDriverCompletionFunc *cb, void *opaque)
1130 return raw_aio_submit(bs, sector_num, qiov, nb_sectors,
1131 cb, opaque, QEMU_AIO_WRITE);
1134 static BlockDriverAIOCB *raw_aio_flush(BlockDriverState *bs,
1135 BlockDriverCompletionFunc *cb, void *opaque)
1137 BDRVRawState *s = bs->opaque;
1139 if (fd_open(bs) < 0)
1142 return paio_submit(bs, s->fd, 0, NULL, 0, cb, opaque, QEMU_AIO_FLUSH);
1145 static void raw_close(BlockDriverState *bs)
1147 BDRVRawState *s = bs->opaque;
1149 raw_detach_aio_context(bs);
1151 #ifdef CONFIG_LINUX_AIO
1153 laio_cleanup(s->aio_ctx);
1162 static int raw_truncate(BlockDriverState *bs, int64_t offset)
1164 BDRVRawState *s = bs->opaque;
1167 if (fstat(s->fd, &st)) {
1171 if (S_ISREG(st.st_mode)) {
1172 if (ftruncate(s->fd, offset) < 0) {
1175 } else if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
1176 if (offset > raw_getlength(bs)) {
1187 static int64_t raw_getlength(BlockDriverState *bs)
1189 BDRVRawState *s = bs->opaque;
1195 if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
1196 struct disklabel dl;
1198 if (ioctl(fd, DIOCGDINFO, &dl))
1200 return (uint64_t)dl.d_secsize *
1201 dl.d_partitions[DISKPART(st.st_rdev)].p_size;
1205 #elif defined(__NetBSD__)
1206 static int64_t raw_getlength(BlockDriverState *bs)
1208 BDRVRawState *s = bs->opaque;
1214 if (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode)) {
1215 struct dkwedge_info dkw;
1217 if (ioctl(fd, DIOCGWEDGEINFO, &dkw) != -1) {
1218 return dkw.dkw_size * 512;
1220 struct disklabel dl;
1222 if (ioctl(fd, DIOCGDINFO, &dl))
1224 return (uint64_t)dl.d_secsize *
1225 dl.d_partitions[DISKPART(st.st_rdev)].p_size;
1230 #elif defined(__sun__)
1231 static int64_t raw_getlength(BlockDriverState *bs)
1233 BDRVRawState *s = bs->opaque;
1234 struct dk_minfo minfo;
1244 * Use the DKIOCGMEDIAINFO ioctl to read the size.
1246 ret = ioctl(s->fd, DKIOCGMEDIAINFO, &minfo);
1248 return minfo.dki_lbsize * minfo.dki_capacity;
1252 * There are reports that lseek on some devices fails, but
1253 * irc discussion said that contingency on contingency was overkill.
1255 size = lseek(s->fd, 0, SEEK_END);
1261 #elif defined(CONFIG_BSD)
1262 static int64_t raw_getlength(BlockDriverState *bs)
1264 BDRVRawState *s = bs->opaque;
1268 #if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
1277 #if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
1280 if (!fstat(fd, &sb) && (S_IFCHR & sb.st_mode)) {
1281 #ifdef DIOCGMEDIASIZE
1282 if (ioctl(fd, DIOCGMEDIASIZE, (off_t *)&size))
1283 #elif defined(DIOCGPART)
1286 if (ioctl(fd, DIOCGPART, &pi) == 0)
1287 size = pi.media_size;
1293 #if defined(__APPLE__) && defined(__MACH__)
1296 size = lseek(fd, 0LL, SEEK_END);
1301 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
1304 /* XXX FreeBSD acd returns UINT_MAX sectors for an empty drive */
1305 if (size == 2048LL * (unsigned)-1)
1307 /* XXX no disc? maybe we need to reopen... */
1308 if (size <= 0 && !reopened && cdrom_reopen(bs) >= 0) {
1315 size = lseek(fd, 0, SEEK_END);
1323 static int64_t raw_getlength(BlockDriverState *bs)
1325 BDRVRawState *s = bs->opaque;
1334 size = lseek(s->fd, 0, SEEK_END);
1342 static int64_t raw_get_allocated_file_size(BlockDriverState *bs)
1345 BDRVRawState *s = bs->opaque;
1347 if (fstat(s->fd, &st) < 0) {
1350 return (int64_t)st.st_blocks * 512;
1353 static int raw_create(const char *filename, QemuOpts *opts, Error **errp)
1357 int64_t total_size = 0;
1360 strstart(filename, "file:", &filename);
1362 /* Read out options */
1364 qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0) / BDRV_SECTOR_SIZE;
1365 nocow = qemu_opt_get_bool(opts, BLOCK_OPT_NOCOW, false);
1367 fd = qemu_open(filename, O_WRONLY | O_CREAT | O_TRUNC | O_BINARY,
1371 error_setg_errno(errp, -result, "Could not create file");
1375 /* Set NOCOW flag to solve performance issue on fs like btrfs.
1376 * This is an optimisation. The FS_IOC_SETFLAGS ioctl return value
1377 * will be ignored since any failure of this operation should not
1378 * block the left work.
1381 if (ioctl(fd, FS_IOC_GETFLAGS, &attr) == 0) {
1382 attr |= FS_NOCOW_FL;
1383 ioctl(fd, FS_IOC_SETFLAGS, &attr);
1388 if (ftruncate(fd, total_size * BDRV_SECTOR_SIZE) != 0) {
1390 error_setg_errno(errp, -result, "Could not resize file");
1392 if (qemu_close(fd) != 0) {
1394 error_setg_errno(errp, -result, "Could not close the new file");
1400 static int64_t try_fiemap(BlockDriverState *bs, off_t start, off_t *data,
1401 off_t *hole, int nb_sectors, int *pnum)
1403 #ifdef CONFIG_FIEMAP
1404 BDRVRawState *s = bs->opaque;
1405 int64_t ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | start;
1408 struct fiemap_extent fe;
1411 if (s->skip_fiemap) {
1415 f.fm.fm_start = start;
1416 f.fm.fm_length = (int64_t)nb_sectors * BDRV_SECTOR_SIZE;
1418 f.fm.fm_extent_count = 1;
1419 f.fm.fm_reserved = 0;
1420 if (ioctl(s->fd, FS_IOC_FIEMAP, &f) == -1) {
1421 s->skip_fiemap = true;
1425 if (f.fm.fm_mapped_extents == 0) {
1426 /* No extents found, data is beyond f.fm.fm_start + f.fm.fm_length.
1427 * f.fm.fm_start + f.fm.fm_length must be clamped to the file size!
1429 off_t length = lseek(s->fd, 0, SEEK_END);
1430 *hole = f.fm.fm_start;
1431 *data = MIN(f.fm.fm_start + f.fm.fm_length, length);
1433 *data = f.fe.fe_logical;
1434 *hole = f.fe.fe_logical + f.fe.fe_length;
1435 if (f.fe.fe_flags & FIEMAP_EXTENT_UNWRITTEN) {
1436 ret |= BDRV_BLOCK_ZERO;
1446 static int64_t try_seek_hole(BlockDriverState *bs, off_t start, off_t *data,
1447 off_t *hole, int *pnum)
1449 #if defined SEEK_HOLE && defined SEEK_DATA
1450 BDRVRawState *s = bs->opaque;
1452 *hole = lseek(s->fd, start, SEEK_HOLE);
1454 /* -ENXIO indicates that sector_num was past the end of the file.
1455 * There is a virtual hole there. */
1456 assert(errno != -ENXIO);
1461 if (*hole > start) {
1464 /* On a hole. We need another syscall to find its end. */
1465 *data = lseek(s->fd, start, SEEK_DATA);
1467 *data = lseek(s->fd, 0, SEEK_END);
1471 return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | start;
1478 * Returns true iff the specified sector is present in the disk image. Drivers
1479 * not implementing the functionality are assumed to not support backing files,
1480 * hence all their sectors are reported as allocated.
1482 * If 'sector_num' is beyond the end of the disk image the return value is 0
1483 * and 'pnum' is set to 0.
1485 * 'pnum' is set to the number of sectors (including and immediately following
1486 * the specified sector) that are known to be in the same
1487 * allocated/unallocated state.
1489 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
1490 * beyond the end of the disk image it will be clamped.
1492 static int64_t coroutine_fn raw_co_get_block_status(BlockDriverState *bs,
1494 int nb_sectors, int *pnum)
1496 off_t start, data = 0, hole = 0;
1504 start = sector_num * BDRV_SECTOR_SIZE;
1506 ret = try_fiemap(bs, start, &data, &hole, nb_sectors, pnum);
1508 ret = try_seek_hole(bs, start, &data, &hole, pnum);
1510 /* Assume everything is allocated. */
1512 hole = start + nb_sectors * BDRV_SECTOR_SIZE;
1513 ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | start;
1517 if (data <= start) {
1518 /* On a data extent, compute sectors to the end of the extent. */
1519 *pnum = MIN(nb_sectors, (hole - start) / BDRV_SECTOR_SIZE);
1521 /* On a hole, compute sectors to the beginning of the next extent. */
1522 *pnum = MIN(nb_sectors, (data - start) / BDRV_SECTOR_SIZE);
1523 ret &= ~BDRV_BLOCK_DATA;
1524 ret |= BDRV_BLOCK_ZERO;
1530 static coroutine_fn BlockDriverAIOCB *raw_aio_discard(BlockDriverState *bs,
1531 int64_t sector_num, int nb_sectors,
1532 BlockDriverCompletionFunc *cb, void *opaque)
1534 BDRVRawState *s = bs->opaque;
1536 return paio_submit(bs, s->fd, sector_num, NULL, nb_sectors,
1537 cb, opaque, QEMU_AIO_DISCARD);
1540 static int coroutine_fn raw_co_write_zeroes(
1541 BlockDriverState *bs, int64_t sector_num,
1542 int nb_sectors, BdrvRequestFlags flags)
1544 BDRVRawState *s = bs->opaque;
1546 if (!(flags & BDRV_REQ_MAY_UNMAP)) {
1547 return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
1548 QEMU_AIO_WRITE_ZEROES);
1549 } else if (s->discard_zeroes) {
1550 return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
1556 static int raw_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
1558 BDRVRawState *s = bs->opaque;
1560 bdi->unallocated_blocks_are_zero = s->discard_zeroes;
1561 bdi->can_write_zeroes_with_unmap = s->discard_zeroes;
1565 static QemuOptsList raw_create_opts = {
1566 .name = "raw-create-opts",
1567 .head = QTAILQ_HEAD_INITIALIZER(raw_create_opts.head),
1570 .name = BLOCK_OPT_SIZE,
1571 .type = QEMU_OPT_SIZE,
1572 .help = "Virtual disk size"
1575 .name = BLOCK_OPT_NOCOW,
1576 .type = QEMU_OPT_BOOL,
1577 .help = "Turn off copy-on-write (valid only on btrfs)"
1579 { /* end of list */ }
1583 static BlockDriver bdrv_file = {
1584 .format_name = "file",
1585 .protocol_name = "file",
1586 .instance_size = sizeof(BDRVRawState),
1587 .bdrv_needs_filename = true,
1588 .bdrv_probe = NULL, /* no probe for protocols */
1589 .bdrv_parse_filename = raw_parse_filename,
1590 .bdrv_file_open = raw_open,
1591 .bdrv_reopen_prepare = raw_reopen_prepare,
1592 .bdrv_reopen_commit = raw_reopen_commit,
1593 .bdrv_reopen_abort = raw_reopen_abort,
1594 .bdrv_close = raw_close,
1595 .bdrv_create = raw_create,
1596 .bdrv_has_zero_init = bdrv_has_zero_init_1,
1597 .bdrv_co_get_block_status = raw_co_get_block_status,
1598 .bdrv_co_write_zeroes = raw_co_write_zeroes,
1600 .bdrv_aio_readv = raw_aio_readv,
1601 .bdrv_aio_writev = raw_aio_writev,
1602 .bdrv_aio_flush = raw_aio_flush,
1603 .bdrv_aio_discard = raw_aio_discard,
1604 .bdrv_refresh_limits = raw_refresh_limits,
1605 .bdrv_io_plug = raw_aio_plug,
1606 .bdrv_io_unplug = raw_aio_unplug,
1607 .bdrv_flush_io_queue = raw_aio_flush_io_queue,
1609 .bdrv_truncate = raw_truncate,
1610 .bdrv_getlength = raw_getlength,
1611 .bdrv_get_info = raw_get_info,
1612 .bdrv_get_allocated_file_size
1613 = raw_get_allocated_file_size,
1615 .bdrv_detach_aio_context = raw_detach_aio_context,
1616 .bdrv_attach_aio_context = raw_attach_aio_context,
1618 .create_opts = &raw_create_opts,
1621 /***********************************************/
1624 #if defined(__APPLE__) && defined(__MACH__)
1625 static kern_return_t FindEjectableCDMedia( io_iterator_t *mediaIterator );
1626 static kern_return_t GetBSDPath( io_iterator_t mediaIterator, char *bsdPath, CFIndex maxPathSize );
1628 kern_return_t FindEjectableCDMedia( io_iterator_t *mediaIterator )
1630 kern_return_t kernResult;
1631 mach_port_t masterPort;
1632 CFMutableDictionaryRef classesToMatch;
1634 kernResult = IOMasterPort( MACH_PORT_NULL, &masterPort );
1635 if ( KERN_SUCCESS != kernResult ) {
1636 printf( "IOMasterPort returned %d\n", kernResult );
1639 classesToMatch = IOServiceMatching( kIOCDMediaClass );
1640 if ( classesToMatch == NULL ) {
1641 printf( "IOServiceMatching returned a NULL dictionary.\n" );
1643 CFDictionarySetValue( classesToMatch, CFSTR( kIOMediaEjectableKey ), kCFBooleanTrue );
1645 kernResult = IOServiceGetMatchingServices( masterPort, classesToMatch, mediaIterator );
1646 if ( KERN_SUCCESS != kernResult )
1648 printf( "IOServiceGetMatchingServices returned %d\n", kernResult );
1654 kern_return_t GetBSDPath( io_iterator_t mediaIterator, char *bsdPath, CFIndex maxPathSize )
1656 io_object_t nextMedia;
1657 kern_return_t kernResult = KERN_FAILURE;
1659 nextMedia = IOIteratorNext( mediaIterator );
1662 CFTypeRef bsdPathAsCFString;
1663 bsdPathAsCFString = IORegistryEntryCreateCFProperty( nextMedia, CFSTR( kIOBSDNameKey ), kCFAllocatorDefault, 0 );
1664 if ( bsdPathAsCFString ) {
1665 size_t devPathLength;
1666 strcpy( bsdPath, _PATH_DEV );
1667 strcat( bsdPath, "r" );
1668 devPathLength = strlen( bsdPath );
1669 if ( CFStringGetCString( bsdPathAsCFString, bsdPath + devPathLength, maxPathSize - devPathLength, kCFStringEncodingASCII ) ) {
1670 kernResult = KERN_SUCCESS;
1672 CFRelease( bsdPathAsCFString );
1674 IOObjectRelease( nextMedia );
1682 static int hdev_probe_device(const char *filename)
1686 /* allow a dedicated CD-ROM driver to match with a higher priority */
1687 if (strstart(filename, "/dev/cdrom", NULL))
1690 if (stat(filename, &st) >= 0 &&
1691 (S_ISCHR(st.st_mode) || S_ISBLK(st.st_mode))) {
1698 static int check_hdev_writable(BDRVRawState *s)
1700 #if defined(BLKROGET)
1701 /* Linux block devices can be configured "read-only" using blockdev(8).
1702 * This is independent of device node permissions and therefore open(2)
1703 * with O_RDWR succeeds. Actual writes fail with EPERM.
1705 * bdrv_open() is supposed to fail if the disk is read-only. Explicitly
1706 * check for read-only block devices so that Linux block devices behave
1712 if (fstat(s->fd, &st)) {
1716 if (!S_ISBLK(st.st_mode)) {
1720 if (ioctl(s->fd, BLKROGET, &readonly) < 0) {
1727 #endif /* defined(BLKROGET) */
1731 static void hdev_parse_filename(const char *filename, QDict *options,
1734 /* The prefix is optional, just as for "file". */
1735 strstart(filename, "host_device:", &filename);
1737 qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
1740 static int hdev_open(BlockDriverState *bs, QDict *options, int flags,
1743 BDRVRawState *s = bs->opaque;
1744 Error *local_err = NULL;
1746 const char *filename = qdict_get_str(options, "filename");
1748 #if defined(__APPLE__) && defined(__MACH__)
1749 if (strstart(filename, "/dev/cdrom", NULL)) {
1750 kern_return_t kernResult;
1751 io_iterator_t mediaIterator;
1752 char bsdPath[ MAXPATHLEN ];
1755 kernResult = FindEjectableCDMedia( &mediaIterator );
1756 kernResult = GetBSDPath( mediaIterator, bsdPath, sizeof( bsdPath ) );
1758 if ( bsdPath[ 0 ] != '\0' ) {
1759 strcat(bsdPath,"s0");
1760 /* some CDs don't have a partition 0 */
1761 fd = qemu_open(bsdPath, O_RDONLY | O_BINARY | O_LARGEFILE);
1763 bsdPath[strlen(bsdPath)-1] = '1';
1768 qdict_put(options, "filename", qstring_from_str(filename));
1771 if ( mediaIterator )
1772 IOObjectRelease( mediaIterator );
1776 s->type = FTYPE_FILE;
1777 #if defined(__linux__)
1779 char resolved_path[ MAXPATHLEN ], *temp;
1781 temp = realpath(filename, resolved_path);
1782 if (temp && strstart(temp, "/dev/sg", NULL)) {
1788 ret = raw_open_common(bs, options, flags, 0, &local_err);
1791 error_propagate(errp, local_err);
1796 if (flags & BDRV_O_RDWR) {
1797 ret = check_hdev_writable(s);
1800 error_setg_errno(errp, -ret, "The device is not writable");
1808 #if defined(__linux__)
1809 /* Note: we do not have a reliable method to detect if the floppy is
1810 present. The current method is to try to open the floppy at every
1811 I/O and to keep it opened during a few hundreds of ms. */
1812 static int fd_open(BlockDriverState *bs)
1814 BDRVRawState *s = bs->opaque;
1815 int last_media_present;
1817 if (s->type != FTYPE_FD)
1819 last_media_present = (s->fd >= 0);
1821 (get_clock() - s->fd_open_time) >= FD_OPEN_TIMEOUT) {
1825 printf("Floppy closed\n");
1829 if (s->fd_got_error &&
1830 (get_clock() - s->fd_error_time) < FD_OPEN_TIMEOUT) {
1832 printf("No floppy (open delayed)\n");
1836 s->fd = qemu_open(bs->filename, s->open_flags & ~O_NONBLOCK);
1838 s->fd_error_time = get_clock();
1839 s->fd_got_error = 1;
1840 if (last_media_present)
1841 s->fd_media_changed = 1;
1843 printf("No floppy\n");
1848 printf("Floppy opened\n");
1851 if (!last_media_present)
1852 s->fd_media_changed = 1;
1853 s->fd_open_time = get_clock();
1854 s->fd_got_error = 0;
1858 static int hdev_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
1860 BDRVRawState *s = bs->opaque;
1862 return ioctl(s->fd, req, buf);
1865 static BlockDriverAIOCB *hdev_aio_ioctl(BlockDriverState *bs,
1866 unsigned long int req, void *buf,
1867 BlockDriverCompletionFunc *cb, void *opaque)
1869 BDRVRawState *s = bs->opaque;
1870 RawPosixAIOData *acb;
1873 if (fd_open(bs) < 0)
1876 acb = g_slice_new(RawPosixAIOData);
1878 acb->aio_type = QEMU_AIO_IOCTL;
1879 acb->aio_fildes = s->fd;
1880 acb->aio_offset = 0;
1881 acb->aio_ioctl_buf = buf;
1882 acb->aio_ioctl_cmd = req;
1883 pool = aio_get_thread_pool(bdrv_get_aio_context(bs));
1884 return thread_pool_submit_aio(pool, aio_worker, acb, cb, opaque);
1887 #elif defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
1888 static int fd_open(BlockDriverState *bs)
1890 BDRVRawState *s = bs->opaque;
1892 /* this is just to ensure s->fd is sane (its called by io ops) */
1897 #else /* !linux && !FreeBSD */
1899 static int fd_open(BlockDriverState *bs)
1904 #endif /* !linux && !FreeBSD */
1906 static coroutine_fn BlockDriverAIOCB *hdev_aio_discard(BlockDriverState *bs,
1907 int64_t sector_num, int nb_sectors,
1908 BlockDriverCompletionFunc *cb, void *opaque)
1910 BDRVRawState *s = bs->opaque;
1912 if (fd_open(bs) < 0) {
1915 return paio_submit(bs, s->fd, sector_num, NULL, nb_sectors,
1916 cb, opaque, QEMU_AIO_DISCARD|QEMU_AIO_BLKDEV);
1919 static coroutine_fn int hdev_co_write_zeroes(BlockDriverState *bs,
1920 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
1922 BDRVRawState *s = bs->opaque;
1929 if (!(flags & BDRV_REQ_MAY_UNMAP)) {
1930 return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
1931 QEMU_AIO_WRITE_ZEROES|QEMU_AIO_BLKDEV);
1932 } else if (s->discard_zeroes) {
1933 return paio_submit_co(bs, s->fd, sector_num, NULL, nb_sectors,
1934 QEMU_AIO_DISCARD|QEMU_AIO_BLKDEV);
1939 static int hdev_create(const char *filename, QemuOpts *opts,
1944 struct stat stat_buf;
1945 int64_t total_size = 0;
1948 /* This function is used by all three protocol block drivers and therefore
1949 * any of these three prefixes may be given.
1950 * The return value has to be stored somewhere, otherwise this is an error
1951 * due to -Werror=unused-value. */
1953 strstart(filename, "host_device:", &filename) ||
1954 strstart(filename, "host_cdrom:" , &filename) ||
1955 strstart(filename, "host_floppy:", &filename);
1959 /* Read out options */
1961 qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0) / BDRV_SECTOR_SIZE;
1963 fd = qemu_open(filename, O_WRONLY | O_BINARY);
1966 error_setg_errno(errp, -ret, "Could not open device");
1970 if (fstat(fd, &stat_buf) < 0) {
1972 error_setg_errno(errp, -ret, "Could not stat device");
1973 } else if (!S_ISBLK(stat_buf.st_mode) && !S_ISCHR(stat_buf.st_mode)) {
1975 "The given file is neither a block nor a character device");
1977 } else if (lseek(fd, 0, SEEK_END) < total_size * BDRV_SECTOR_SIZE) {
1978 error_setg(errp, "Device is too small");
1986 static BlockDriver bdrv_host_device = {
1987 .format_name = "host_device",
1988 .protocol_name = "host_device",
1989 .instance_size = sizeof(BDRVRawState),
1990 .bdrv_needs_filename = true,
1991 .bdrv_probe_device = hdev_probe_device,
1992 .bdrv_parse_filename = hdev_parse_filename,
1993 .bdrv_file_open = hdev_open,
1994 .bdrv_close = raw_close,
1995 .bdrv_reopen_prepare = raw_reopen_prepare,
1996 .bdrv_reopen_commit = raw_reopen_commit,
1997 .bdrv_reopen_abort = raw_reopen_abort,
1998 .bdrv_create = hdev_create,
1999 .create_opts = &raw_create_opts,
2000 .bdrv_co_write_zeroes = hdev_co_write_zeroes,
2002 .bdrv_aio_readv = raw_aio_readv,
2003 .bdrv_aio_writev = raw_aio_writev,
2004 .bdrv_aio_flush = raw_aio_flush,
2005 .bdrv_aio_discard = hdev_aio_discard,
2006 .bdrv_refresh_limits = raw_refresh_limits,
2007 .bdrv_io_plug = raw_aio_plug,
2008 .bdrv_io_unplug = raw_aio_unplug,
2009 .bdrv_flush_io_queue = raw_aio_flush_io_queue,
2011 .bdrv_truncate = raw_truncate,
2012 .bdrv_getlength = raw_getlength,
2013 .bdrv_get_info = raw_get_info,
2014 .bdrv_get_allocated_file_size
2015 = raw_get_allocated_file_size,
2017 .bdrv_detach_aio_context = raw_detach_aio_context,
2018 .bdrv_attach_aio_context = raw_attach_aio_context,
2020 /* generic scsi device */
2022 .bdrv_ioctl = hdev_ioctl,
2023 .bdrv_aio_ioctl = hdev_aio_ioctl,
2028 static void floppy_parse_filename(const char *filename, QDict *options,
2031 /* The prefix is optional, just as for "file". */
2032 strstart(filename, "host_floppy:", &filename);
2034 qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
2037 static int floppy_open(BlockDriverState *bs, QDict *options, int flags,
2040 BDRVRawState *s = bs->opaque;
2041 Error *local_err = NULL;
2046 /* open will not fail even if no floppy is inserted, so add O_NONBLOCK */
2047 ret = raw_open_common(bs, options, flags, O_NONBLOCK, &local_err);
2050 error_propagate(errp, local_err);
2055 /* close fd so that we can reopen it as needed */
2058 s->fd_media_changed = 1;
2063 static int floppy_probe_device(const char *filename)
2067 struct floppy_struct fdparam;
2070 if (strstart(filename, "/dev/fd", NULL) &&
2071 !strstart(filename, "/dev/fdset/", NULL)) {
2075 fd = qemu_open(filename, O_RDONLY | O_NONBLOCK);
2079 ret = fstat(fd, &st);
2080 if (ret == -1 || !S_ISBLK(st.st_mode)) {
2084 /* Attempt to detect via a floppy specific ioctl */
2085 ret = ioctl(fd, FDGETPRM, &fdparam);
2096 static int floppy_is_inserted(BlockDriverState *bs)
2098 return fd_open(bs) >= 0;
2101 static int floppy_media_changed(BlockDriverState *bs)
2103 BDRVRawState *s = bs->opaque;
2107 * XXX: we do not have a true media changed indication.
2108 * It does not work if the floppy is changed without trying to read it.
2111 ret = s->fd_media_changed;
2112 s->fd_media_changed = 0;
2114 printf("Floppy changed=%d\n", ret);
2119 static void floppy_eject(BlockDriverState *bs, bool eject_flag)
2121 BDRVRawState *s = bs->opaque;
2128 fd = qemu_open(bs->filename, s->open_flags | O_NONBLOCK);
2130 if (ioctl(fd, FDEJECT, 0) < 0)
2136 static BlockDriver bdrv_host_floppy = {
2137 .format_name = "host_floppy",
2138 .protocol_name = "host_floppy",
2139 .instance_size = sizeof(BDRVRawState),
2140 .bdrv_needs_filename = true,
2141 .bdrv_probe_device = floppy_probe_device,
2142 .bdrv_parse_filename = floppy_parse_filename,
2143 .bdrv_file_open = floppy_open,
2144 .bdrv_close = raw_close,
2145 .bdrv_reopen_prepare = raw_reopen_prepare,
2146 .bdrv_reopen_commit = raw_reopen_commit,
2147 .bdrv_reopen_abort = raw_reopen_abort,
2148 .bdrv_create = hdev_create,
2149 .create_opts = &raw_create_opts,
2151 .bdrv_aio_readv = raw_aio_readv,
2152 .bdrv_aio_writev = raw_aio_writev,
2153 .bdrv_aio_flush = raw_aio_flush,
2154 .bdrv_refresh_limits = raw_refresh_limits,
2155 .bdrv_io_plug = raw_aio_plug,
2156 .bdrv_io_unplug = raw_aio_unplug,
2157 .bdrv_flush_io_queue = raw_aio_flush_io_queue,
2159 .bdrv_truncate = raw_truncate,
2160 .bdrv_getlength = raw_getlength,
2161 .has_variable_length = true,
2162 .bdrv_get_allocated_file_size
2163 = raw_get_allocated_file_size,
2165 .bdrv_detach_aio_context = raw_detach_aio_context,
2166 .bdrv_attach_aio_context = raw_attach_aio_context,
2168 /* removable device support */
2169 .bdrv_is_inserted = floppy_is_inserted,
2170 .bdrv_media_changed = floppy_media_changed,
2171 .bdrv_eject = floppy_eject,
2175 #if defined(__linux__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
2176 static void cdrom_parse_filename(const char *filename, QDict *options,
2179 /* The prefix is optional, just as for "file". */
2180 strstart(filename, "host_cdrom:", &filename);
2182 qdict_put_obj(options, "filename", QOBJECT(qstring_from_str(filename)));
2187 static int cdrom_open(BlockDriverState *bs, QDict *options, int flags,
2190 BDRVRawState *s = bs->opaque;
2191 Error *local_err = NULL;
2196 /* open will not fail even if no CD is inserted, so add O_NONBLOCK */
2197 ret = raw_open_common(bs, options, flags, O_NONBLOCK, &local_err);
2199 error_propagate(errp, local_err);
2204 static int cdrom_probe_device(const char *filename)
2210 fd = qemu_open(filename, O_RDONLY | O_NONBLOCK);
2214 ret = fstat(fd, &st);
2215 if (ret == -1 || !S_ISBLK(st.st_mode)) {
2219 /* Attempt to detect via a CDROM specific ioctl */
2220 ret = ioctl(fd, CDROM_DRIVE_STATUS, CDSL_CURRENT);
2230 static int cdrom_is_inserted(BlockDriverState *bs)
2232 BDRVRawState *s = bs->opaque;
2235 ret = ioctl(s->fd, CDROM_DRIVE_STATUS, CDSL_CURRENT);
2236 if (ret == CDS_DISC_OK)
2241 static void cdrom_eject(BlockDriverState *bs, bool eject_flag)
2243 BDRVRawState *s = bs->opaque;
2246 if (ioctl(s->fd, CDROMEJECT, NULL) < 0)
2247 perror("CDROMEJECT");
2249 if (ioctl(s->fd, CDROMCLOSETRAY, NULL) < 0)
2250 perror("CDROMEJECT");
2254 static void cdrom_lock_medium(BlockDriverState *bs, bool locked)
2256 BDRVRawState *s = bs->opaque;
2258 if (ioctl(s->fd, CDROM_LOCKDOOR, locked) < 0) {
2260 * Note: an error can happen if the distribution automatically
2263 /* perror("CDROM_LOCKDOOR"); */
2267 static BlockDriver bdrv_host_cdrom = {
2268 .format_name = "host_cdrom",
2269 .protocol_name = "host_cdrom",
2270 .instance_size = sizeof(BDRVRawState),
2271 .bdrv_needs_filename = true,
2272 .bdrv_probe_device = cdrom_probe_device,
2273 .bdrv_parse_filename = cdrom_parse_filename,
2274 .bdrv_file_open = cdrom_open,
2275 .bdrv_close = raw_close,
2276 .bdrv_reopen_prepare = raw_reopen_prepare,
2277 .bdrv_reopen_commit = raw_reopen_commit,
2278 .bdrv_reopen_abort = raw_reopen_abort,
2279 .bdrv_create = hdev_create,
2280 .create_opts = &raw_create_opts,
2282 .bdrv_aio_readv = raw_aio_readv,
2283 .bdrv_aio_writev = raw_aio_writev,
2284 .bdrv_aio_flush = raw_aio_flush,
2285 .bdrv_refresh_limits = raw_refresh_limits,
2286 .bdrv_io_plug = raw_aio_plug,
2287 .bdrv_io_unplug = raw_aio_unplug,
2288 .bdrv_flush_io_queue = raw_aio_flush_io_queue,
2290 .bdrv_truncate = raw_truncate,
2291 .bdrv_getlength = raw_getlength,
2292 .has_variable_length = true,
2293 .bdrv_get_allocated_file_size
2294 = raw_get_allocated_file_size,
2296 .bdrv_detach_aio_context = raw_detach_aio_context,
2297 .bdrv_attach_aio_context = raw_attach_aio_context,
2299 /* removable device support */
2300 .bdrv_is_inserted = cdrom_is_inserted,
2301 .bdrv_eject = cdrom_eject,
2302 .bdrv_lock_medium = cdrom_lock_medium,
2304 /* generic scsi device */
2305 .bdrv_ioctl = hdev_ioctl,
2306 .bdrv_aio_ioctl = hdev_aio_ioctl,
2308 #endif /* __linux__ */
2310 #if defined (__FreeBSD__) || defined(__FreeBSD_kernel__)
2311 static int cdrom_open(BlockDriverState *bs, QDict *options, int flags,
2314 BDRVRawState *s = bs->opaque;
2315 Error *local_err = NULL;
2320 ret = raw_open_common(bs, options, flags, 0, &local_err);
2323 error_propagate(errp, local_err);
2328 /* make sure the door isn't locked at this time */
2329 ioctl(s->fd, CDIOCALLOW);
2333 static int cdrom_probe_device(const char *filename)
2335 if (strstart(filename, "/dev/cd", NULL) ||
2336 strstart(filename, "/dev/acd", NULL))
2341 static int cdrom_reopen(BlockDriverState *bs)
2343 BDRVRawState *s = bs->opaque;
2347 * Force reread of possibly changed/newly loaded disc,
2348 * FreeBSD seems to not notice sometimes...
2352 fd = qemu_open(bs->filename, s->open_flags, 0644);
2359 /* make sure the door isn't locked at this time */
2360 ioctl(s->fd, CDIOCALLOW);
2364 static int cdrom_is_inserted(BlockDriverState *bs)
2366 return raw_getlength(bs) > 0;
2369 static void cdrom_eject(BlockDriverState *bs, bool eject_flag)
2371 BDRVRawState *s = bs->opaque;
2376 (void) ioctl(s->fd, CDIOCALLOW);
2379 if (ioctl(s->fd, CDIOCEJECT) < 0)
2380 perror("CDIOCEJECT");
2382 if (ioctl(s->fd, CDIOCCLOSE) < 0)
2383 perror("CDIOCCLOSE");
2389 static void cdrom_lock_medium(BlockDriverState *bs, bool locked)
2391 BDRVRawState *s = bs->opaque;
2395 if (ioctl(s->fd, (locked ? CDIOCPREVENT : CDIOCALLOW)) < 0) {
2397 * Note: an error can happen if the distribution automatically
2400 /* perror("CDROM_LOCKDOOR"); */
2404 static BlockDriver bdrv_host_cdrom = {
2405 .format_name = "host_cdrom",
2406 .protocol_name = "host_cdrom",
2407 .instance_size = sizeof(BDRVRawState),
2408 .bdrv_needs_filename = true,
2409 .bdrv_probe_device = cdrom_probe_device,
2410 .bdrv_parse_filename = cdrom_parse_filename,
2411 .bdrv_file_open = cdrom_open,
2412 .bdrv_close = raw_close,
2413 .bdrv_reopen_prepare = raw_reopen_prepare,
2414 .bdrv_reopen_commit = raw_reopen_commit,
2415 .bdrv_reopen_abort = raw_reopen_abort,
2416 .bdrv_create = hdev_create,
2417 .create_opts = &raw_create_opts,
2419 .bdrv_aio_readv = raw_aio_readv,
2420 .bdrv_aio_writev = raw_aio_writev,
2421 .bdrv_aio_flush = raw_aio_flush,
2422 .bdrv_refresh_limits = raw_refresh_limits,
2423 .bdrv_io_plug = raw_aio_plug,
2424 .bdrv_io_unplug = raw_aio_unplug,
2425 .bdrv_flush_io_queue = raw_aio_flush_io_queue,
2427 .bdrv_truncate = raw_truncate,
2428 .bdrv_getlength = raw_getlength,
2429 .has_variable_length = true,
2430 .bdrv_get_allocated_file_size
2431 = raw_get_allocated_file_size,
2433 .bdrv_detach_aio_context = raw_detach_aio_context,
2434 .bdrv_attach_aio_context = raw_attach_aio_context,
2436 /* removable device support */
2437 .bdrv_is_inserted = cdrom_is_inserted,
2438 .bdrv_eject = cdrom_eject,
2439 .bdrv_lock_medium = cdrom_lock_medium,
2441 #endif /* __FreeBSD__ */
2443 static void bdrv_file_init(void)
2446 * Register all the drivers. Note that order is important, the driver
2447 * registered last will get probed first.
2449 bdrv_register(&bdrv_file);
2450 bdrv_register(&bdrv_host_device);
2452 bdrv_register(&bdrv_host_floppy);
2453 bdrv_register(&bdrv_host_cdrom);
2455 #if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
2456 bdrv_register(&bdrv_host_cdrom);
2460 block_init(bdrv_file_init);