configure

   1 #!/bin/sh
   2 #
   3 # qemu configure script (c) 2003 Fabrice Bellard
   4 #
   5
   6 # Unset some variables known to interfere with behavior of common tools,
   7 # just as autoconf does.
   8 CLICOLOR_FORCE= GREP_OPTIONS=
   9 unset CLICOLOR_FORCE GREP_OPTIONS
  10
  11 # Don't allow CCACHE, if present, to use cached results of compile tests!
  12 export CCACHE_RECACHE=yes
  13
  14 # Temporary directory used for files created while
  15 # configure runs. Since it is in the build directory
  16 # we can safely blow away any previous version of it
  17 # (and we need not jump through hoops to try to delete
  18 # it when configure exits.)
  19 TMPDIR1="config-temp"
  20 rm -rf "${TMPDIR1}"
  21 mkdir -p "${TMPDIR1}"
  22 if [ $? -ne 0 ]; then
  23     echo "ERROR: failed to create temporary directory"
  24     exit 1
  25 fi
  26
  27 TMPB="qemu-conf"
  28 TMPC="${TMPDIR1}/${TMPB}.c"
  29 TMPO="${TMPDIR1}/${TMPB}.o"
  30 TMPCXX="${TMPDIR1}/${TMPB}.cxx"
  31 TMPE="${TMPDIR1}/${TMPB}.exe"
  32 TMPMO="${TMPDIR1}/${TMPB}.mo"
  33
  34 rm -f config.log
  35
  36 # Print a helpful header at the top of config.log
  37 echo "# QEMU configure log $(date)" >> config.log
  38 printf "# Configured with:" >> config.log
  39 printf " '%s'" "$0" "$@" >> config.log
  40 echo >> config.log
  41 echo "#" >> config.log
  42
  43 print_error() {
  44     (echo
  45     echo "ERROR: $1"
  46     while test -n "$2"; do
  47         echo "       $2"
  48         shift
  49     done
  50     echo) >&2
  51 }
  52
  53 error_exit() {
  54     print_error "$@"
  55     exit 1
  56 }
  57
  58 do_compiler() {
  59     # Run the compiler, capturing its output to the log. First argument
  60     # is compiler binary to execute.
  61     local compiler="$1"
  62     shift
  63     if test -n "$BASH_VERSION"; then eval '
  64         echo >>config.log "
  65 funcs: ${FUNCNAME[*]}
  66 lines: ${BASH_LINENO[*]}"
  67     '; fi
  68     echo $compiler "$@" >> config.log
  69     $compiler "$@" >> config.log 2>&1 || return $?
  70     # Test passed. If this is an --enable-werror build, rerun
  71     # the test with -Werror and bail out if it fails. This
  72     # makes warning-generating-errors in configure test code
  73     # obvious to developers.
  74     if test "$werror" != "yes"; then
  75         return 0
  76     fi
  77     # Don't bother rerunning the compile if we were already using -Werror
  78     case "$*" in
  79         *-Werror*)
  80            return 0
  81         ;;
  82     esac
  83     echo $compiler -Werror "$@" >> config.log
  84     $compiler -Werror "$@" >> config.log 2>&1 && return $?
  85     error_exit "configure test passed without -Werror but failed with -Werror." \
  86         "This is probably a bug in the configure script. The failing command" \
  87         "will be at the bottom of config.log." \
  88         "You can run configure with --disable-werror to bypass this check."
  89 }
  90
  91 do_cc() {
  92     do_compiler "$cc" "$@"
  93 }
  94
  95 do_cxx() {
  96     do_compiler "$cxx" "$@"
  97 }
  98
  99 update_cxxflags() {
 100     # Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
 101     # options which some versions of GCC's C++ compiler complain about
 102     # because they only make sense for C programs.
 103     QEMU_CXXFLAGS="$QEMU_CXXFLAGS -D__STDC_LIMIT_MACROS"
 104
 105     for arg in $QEMU_CFLAGS; do
 106         case $arg in
 107             -Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
 108             -Wold-style-declaration|-Wold-style-definition|-Wredundant-decls)
 109                 ;;
 110             *)
 111                 QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg
 112                 ;;
 113         esac
 114     done
 115 }
 116
 117 compile_object() {
 118   local_cflags="$1"
 119   do_cc $QEMU_CFLAGS $local_cflags -c -o $TMPO $TMPC
 120 }
 121
 122 compile_prog() {
 123   local_cflags="$1"
 124   local_ldflags="$2"
 125   do_cc $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags
 126 }
 127
 128 # symbolically link $1 to $2.  Portable version of "ln -sf".
 129 symlink() {
 130   rm -rf "$2"
 131   mkdir -p "$(dirname "$2")"
 132   ln -s "$1" "$2"
 133 }
 134
 135 # check whether a command is available to this shell (may be either an
 136 # executable or a builtin)
 137 has() {
 138     type "$1" >/dev/null 2>&1
 139 }
 140
 141 # search for an executable in PATH
 142 path_of() {
 143     local_command="$1"
 144     local_ifs="$IFS"
 145     local_dir=""
 146
 147     # pathname has a dir component?
 148     if [ "${local_command#*/}" != "$local_command" ]; then
 149         if [ -x "$local_command" ] && [ ! -d "$local_command" ]; then
 150             echo "$local_command"
 151             return 0
 152         fi
 153     fi
 154     if [ -z "$local_command" ]; then
 155         return 1
 156     fi
 157
 158     IFS=:
 159     for local_dir in $PATH; do
 160         if [ -x "$local_dir/$local_command" ] && [ ! -d "$local_dir/$local_command" ]; then
 161             echo "$local_dir/$local_command"
 162             IFS="${local_ifs:-$(printf ' \t\n')}"
 163             return 0
 164         fi
 165     done
 166     # not found
 167     IFS="${local_ifs:-$(printf ' \t\n')}"
 168     return 1
 169 }
 170
 171 have_backend () {
 172     echo "$trace_backends" | grep "$1" >/dev/null
 173 }
 174
 175 glob() {
 176     eval test -z '"${1#'"$2"'}"'
 177 }
 178
 179 supported_hax_target() {
 180     test "$hax" = "yes" || return 1
 181     glob "$1" "*-softmmu" || return 1
 182     case "${1%-softmmu}" in
 183         i386|x86_64)
 184             return 0
 185         ;;
 186     esac
 187     return 1
 188 }
 189
 190 supported_kvm_target() {
 191     test "$kvm" = "yes" || return 1
 192     glob "$1" "*-softmmu" || return 1
 193     case "${1%-softmmu}:$cpu" in
 194         arm:arm | aarch64:aarch64 | \
 195         i386:i386 | i386:x86_64 | i386:x32 | \
 196         x86_64:i386 | x86_64:x86_64 | x86_64:x32 | \
 197         mips:mips | mipsel:mips | \
 198         ppc:ppc | ppc64:ppc | ppc:ppc64 | ppc64:ppc64 | \
 199         s390x:s390x)
 200             return 0
 201         ;;
 202     esac
 203     return 1
 204 }
 205
 206 supported_xen_target() {
 207     test "$xen" = "yes" || return 1
 208     glob "$1" "*-softmmu" || return 1
 209     # Only i386 and x86_64 provide the xenpv machine.
 210     case "${1%-softmmu}" in
 211         i386|x86_64)
 212             return 0
 213         ;;
 214     esac
 215     return 1
 216 }
 217
 218 supported_hvf_target() {
 219     test "$hvf" = "yes" || return 1
 220     glob "$1" "*-softmmu" || return 1
 221     case "${1%-softmmu}" in
 222         x86_64)
 223             return 0
 224         ;;
 225     esac
 226     return 1
 227 }
 228
 229 supported_whpx_target() {
 230     test "$whpx" = "yes" || return 1
 231     glob "$1" "*-softmmu" || return 1
 232     case "${1%-softmmu}" in
 233         i386|x86_64)
 234             return 0
 235         ;;
 236     esac
 237     return 1
 238 }
 239
 240 supported_target() {
 241     case "$1" in
 242         *-softmmu)
 243             ;;
 244         *-linux-user)
 245             if test "$linux" != "yes"; then
 246                 print_error "Target '$target' is only available on a Linux host"
 247                 return 1
 248             fi
 249             ;;
 250         *-bsd-user)
 251             if test "$bsd" != "yes"; then
 252                 print_error "Target '$target' is only available on a BSD host"
 253                 return 1
 254             fi
 255             ;;
 256         *)
 257             print_error "Invalid target name '$target'"
 258             return 1
 259             ;;
 260     esac
 261     test "$tcg" = "yes" && return 0
 262     supported_kvm_target "$1" && return 0
 263     supported_xen_target "$1" && return 0
 264     supported_hax_target "$1" && return 0
 265     supported_hvf_target "$1" && return 0
 266     supported_whpx_target "$1" && return 0
 267     print_error "TCG disabled, but hardware accelerator not available for '$target'"
 268     return 1
 269 }
 270
 271
 272 ld_has() {
 273     $ld --help 2>/dev/null | grep ".$1" >/dev/null 2>&1
 274 }
 275
 276 # default parameters
 277 source_path=$(dirname "$0")
 278 cpu=""
 279 iasl="iasl"
 280 interp_prefix="/usr/gnemul/qemu-%M"
 281 static="no"
 282 cross_prefix=""
 283 audio_drv_list=""
 284 block_drv_rw_whitelist=""
 285 block_drv_ro_whitelist=""
 286 host_cc="cc"
 287 libs_softmmu=""
 288 libs_tools=""
 289 audio_pt_int=""
 290 audio_win_int=""
 291 libs_qga=""
 292 debug_info="yes"
 293 stack_protector=""
 294
 295 if test -e "$source_path/.git"
 296 then
 297     git_update=yes
 298     git_submodules="ui/keycodemapdb"
 299 else
 300     git_update=no
 301     git_submodules=""
 302
 303     if ! test -f "$source_path/ui/keycodemapdb/README"
 304     then
 305         echo
 306         echo "ERROR: missing file $source_path/ui/keycodemapdb/README"
 307         echo
 308         echo "This is not a GIT checkout but module content appears to"
 309         echo "be missing. Do not use 'git archive' or GitHub download links"
 310         echo "to acquire QEMU source archives. Non-GIT builds are only"
 311         echo "supported with source archives linked from:"
 312         echo
 313         echo "  https://www.qemu.org/download/"
 314         echo
 315         echo "Developers working with GIT can use scripts/archive-source.sh"
 316         echo "if they need to create valid source archives."
 317         echo
 318         exit 1
 319     fi
 320 fi
 321 git="git"
 322
 323 # Don't accept a target_list environment variable.
 324 unset target_list
 325
 326 # Default value for a variable defining feature "foo".
 327 #  * foo="no"  feature will only be used if --enable-foo arg is given
 328 #  * foo=""    feature will be searched for, and if found, will be used
 329 #              unless --disable-foo is given
 330 #  * foo="yes" this value will only be set by --enable-foo flag.
 331 #              feature will searched for,
 332 #              if not found, configure exits with error
 333 #
 334 # Always add --enable-foo and --disable-foo command line args.
 335 # Distributions want to ensure that several features are compiled in, and it
 336 # is impossible without a --enable-foo that exits if a feature is not found.
 337
 338 bluez=""
 339 brlapi=""
 340 curl=""
 341 curses=""
 342 docs=""
 343 fdt=""
 344 netmap="no"
 345 sdl=""
 346 sdlabi=""
 347 virtfs=""
 348 mpath=""
 349 vnc="yes"
 350 sparse="no"
 351 vde=""
 352 vnc_sasl=""
 353 vnc_jpeg=""
 354 vnc_png=""
 355 xkbcommon=""
 356 xen=""
 357 xen_ctrl_version=""
 358 xen_pv_domain_build="no"
 359 xen_pci_passthrough=""
 360 linux_aio=""
 361 cap_ng=""
 362 attr=""
 363 libattr=""
 364 xfs=""
 365 tcg="yes"
 366 membarrier=""
 367 vhost_net="no"
 368 vhost_crypto="no"
 369 vhost_scsi="no"
 370 vhost_vsock="no"
 371 vhost_user=""
 372 kvm="no"
 373 hax="no"
 374 hvf="no"
 375 whpx="no"
 376 rdma=""
 377 pvrdma=""
 378 gprof="no"
 379 debug_tcg="no"
 380 debug="no"
 381 sanitizers="no"
 382 fortify_source=""
 383 strip_opt="yes"
 384 tcg_interpreter="no"
 385 bigendian="no"
 386 mingw32="no"
 387 gcov="no"
 388 gcov_tool="gcov"
 389 EXESUF=""
 390 DSOSUF=".so"
 391 LDFLAGS_SHARED="-shared"
 392 modules="no"
 393 prefix="/usr/local"
 394 mandir="\${prefix}/share/man"
 395 datadir="\${prefix}/share"
 396 firmwarepath="\${prefix}/share/qemu-firmware"
 397 qemu_docdir="\${prefix}/share/doc/qemu"
 398 bindir="\${prefix}/bin"
 399 libdir="\${prefix}/lib"
 400 libexecdir="\${prefix}/libexec"
 401 includedir="\${prefix}/include"
 402 sysconfdir="\${prefix}/etc"
 403 local_statedir="\${prefix}/var"
 404 confsuffix="/qemu"
 405 slirp="yes"
 406 oss_lib=""
 407 bsd="no"
 408 linux="no"
 409 solaris="no"
 410 profiler="no"
 411 cocoa="no"
 412 softmmu="yes"
 413 linux_user="no"
 414 bsd_user="no"
 415 blobs="yes"
 416 pkgversion=""
 417 pie=""
 418 qom_cast_debug="yes"
 419 trace_backends="log"
 420 trace_file="trace"
 421 spice=""
 422 rbd=""
 423 smartcard=""
 424 libusb=""
 425 usb_redir=""
 426 opengl=""
 427 opengl_dmabuf="no"
 428 cpuid_h="no"
 429 avx2_opt="no"
 430 zlib="yes"
 431 capstone=""
 432 lzo=""
 433 snappy=""
 434 bzip2=""
 435 guest_agent=""
 436 guest_agent_with_vss="no"
 437 guest_agent_ntddscsi="no"
 438 guest_agent_msi=""
 439 vss_win32_sdk=""
 440 win_sdk="no"
 441 want_tools="yes"
 442 libiscsi=""
 443 libnfs=""
 444 coroutine=""
 445 coroutine_pool=""
 446 debug_stack_usage="no"
 447 crypto_afalg="no"
 448 seccomp=""
 449 glusterfs=""
 450 glusterfs_xlator_opt="no"
 451 glusterfs_discard="no"
 452 glusterfs_fallocate="no"
 453 glusterfs_zerofill="no"
 454 gtk=""
 455 gtkabi=""
 456 gtk_gl="no"
 457 tls_priority="NORMAL"
 458 gnutls=""
 459 gnutls_rnd=""
 460 nettle=""
 461 nettle_kdf="no"
 462 gcrypt=""
 463 gcrypt_hmac="no"
 464 gcrypt_kdf="no"
 465 vte=""
 466 virglrenderer=""
 467 tpm="yes"
 468 libssh2=""
 469 live_block_migration="yes"
 470 numa=""
 471 tcmalloc="no"
 472 jemalloc="no"
 473 replication="yes"
 474 vxhs=""
 475 libxml2=""
 476 docker="no"
 477 debug_mutex="no"
 478 libpmem=""
 479
 480 # cross compilers defaults, can be overridden with --cross-cc-ARCH
 481 cross_cc_aarch64="aarch64-linux-gnu-gcc"
 482 cross_cc_aarch64_be="$cross_cc_aarch64"
 483 cross_cc_cflags_aarch64_be="-mbig-endian"
 484 cross_cc_arm="arm-linux-gnueabihf-gcc"
 485 cross_cc_cflags_armeb="-mbig-endian"
 486 cross_cc_i386="i386-pc-linux-gnu-gcc"
 487 cross_cc_cflags_i386=""
 488 cross_cc_powerpc="powerpc-linux-gnu-gcc"
 489 cross_cc_powerpc="powerpc-linux-gnu-gcc"
 490
 491 enabled_cross_compilers=""
 492
 493 supported_cpu="no"
 494 supported_os="no"
 495 bogus_os="no"
 496 malloc_trim=""
 497
 498 # parse CC options first
 499 for opt do
 500   optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
 501   case "$opt" in
 502   --cross-prefix=*) cross_prefix="$optarg"
 503   ;;
 504   --cc=*) CC="$optarg"
 505   ;;
 506   --cxx=*) CXX="$optarg"
 507   ;;
 508   --source-path=*) source_path="$optarg"
 509   ;;
 510   --cpu=*) cpu="$optarg"
 511   ;;
 512   --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg"
 513   ;;
 514   --extra-cxxflags=*) QEMU_CXXFLAGS="$QEMU_CXXFLAGS $optarg"
 515   ;;
 516   --extra-ldflags=*) LDFLAGS="$LDFLAGS $optarg"
 517                      EXTRA_LDFLAGS="$optarg"
 518   ;;
 519   --enable-debug-info) debug_info="yes"
 520   ;;
 521   --disable-debug-info) debug_info="no"
 522   ;;
 523   --cross-cc-*[!a-zA-Z0-9_-]*=*) error_exit "Passed bad --cross-cc-FOO option"
 524   ;;
 525   --cross-cc-cflags-*) cc_arch=${opt#--cross-cc-flags-}; cc_arch=${cc_arch%%=*}
 526                       eval "cross_cc_cflags_${cc_arch}=\$optarg"
 527   ;;
 528   --cross-cc-*) cc_arch=${opt#--cross-cc-}; cc_arch=${cc_arch%%=*}
 529                 eval "cross_cc_${cc_arch}=\$optarg"
 530   ;;
 531   esac
 532 done
 533 # OS specific
 534 # Using uname is really, really broken.  Once we have the right set of checks
 535 # we can eliminate its usage altogether.
 536
 537 # Preferred compiler:
 538 #  ${CC} (if set)
 539 #  ${cross_prefix}gcc (if cross-prefix specified)
 540 #  system compiler
 541 if test -z "${CC}${cross_prefix}"; then
 542   cc="$host_cc"
 543 else
 544   cc="${CC-${cross_prefix}gcc}"
 545 fi
 546
 547 if test -z "${CXX}${cross_prefix}"; then
 548   cxx="c++"
 549 else
 550   cxx="${CXX-${cross_prefix}g++}"
 551 fi
 552
 553 ar="${AR-${cross_prefix}ar}"
 554 as="${AS-${cross_prefix}as}"
 555 ccas="${CCAS-$cc}"
 556 cpp="${CPP-$cc -E}"
 557 objcopy="${OBJCOPY-${cross_prefix}objcopy}"
 558 ld="${LD-${cross_prefix}ld}"
 559 ranlib="${RANLIB-${cross_prefix}ranlib}"
 560 nm="${NM-${cross_prefix}nm}"
 561 strip="${STRIP-${cross_prefix}strip}"
 562 windres="${WINDRES-${cross_prefix}windres}"
 563 pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}"
 564 query_pkg_config() {
 565     "${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@"
 566 }
 567 pkg_config=query_pkg_config
 568 sdl_config="${SDL_CONFIG-${cross_prefix}sdl-config}"
 569 sdl2_config="${SDL2_CONFIG-${cross_prefix}sdl2-config}"
 570
 571 # If the user hasn't specified ARFLAGS, default to 'rv', just as make does.
 572 ARFLAGS="${ARFLAGS-rv}"
 573
 574 # default flags for all hosts
 575 # We use -fwrapv to tell the compiler that we require a C dialect where
 576 # left shift of signed integers is well defined and has the expected
 577 # 2s-complement style results. (Both clang and gcc agree that it
 578 # provides these semantics.)
 579 QEMU_CFLAGS="-fno-strict-aliasing -fno-common -fwrapv $QEMU_CFLAGS"
 580 QEMU_CFLAGS="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
 581 QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
 582 QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
 583 QEMU_INCLUDES="-iquote . -iquote \$(SRC_PATH) -iquote \$(SRC_PATH)/accel/tcg -iquote \$(SRC_PATH)/include"
 584 if test "$debug_info" = "yes"; then
 585     CFLAGS="-g $CFLAGS"
 586     LDFLAGS="-g $LDFLAGS"
 587 fi
 588
 589 # make source path absolute
 590 source_path=$(cd "$source_path"; pwd)
 591
 592 # running configure in the source tree?
 593 # we know that's the case if configure is there.
 594 if test -f "./configure"; then
 595     pwd_is_source_path="y"
 596 else
 597     pwd_is_source_path="n"
 598 fi
 599
 600 check_define() {
 601 cat > $TMPC <<EOF
 602 #if !defined($1)
 603 #error $1 not defined
 604 #endif
 605 int main(void) { return 0; }
 606 EOF
 607   compile_object
 608 }
 609
 610 check_include() {
 611 cat > $TMPC <<EOF
 612 #include <$1>
 613 int main(void) { return 0; }
 614 EOF
 615   compile_object
 616 }
 617
 618 write_c_skeleton() {
 619     cat > $TMPC <<EOF
 620 int main(void) { return 0; }
 621 EOF
 622 }
 623
 624 if check_define __linux__ ; then
 625   targetos="Linux"
 626 elif check_define _WIN32 ; then
 627   targetos='MINGW32'
 628 elif check_define __OpenBSD__ ; then
 629   targetos='OpenBSD'
 630 elif check_define __sun__ ; then
 631   targetos='SunOS'
 632 elif check_define __HAIKU__ ; then
 633   targetos='Haiku'
 634 elif check_define __FreeBSD__ ; then
 635   targetos='FreeBSD'
 636 elif check_define __FreeBSD_kernel__ && check_define __GLIBC__; then
 637   targetos='GNU/kFreeBSD'
 638 elif check_define __DragonFly__ ; then
 639   targetos='DragonFly'
 640 elif check_define __NetBSD__; then
 641   targetos='NetBSD'
 642 elif check_define __APPLE__; then
 643   targetos='Darwin'
 644 else
 645   # This is a fatal error, but don't report it yet, because we
 646   # might be going to just print the --help text, or it might
 647   # be the result of a missing compiler.
 648   targetos='bogus'
 649   bogus_os='yes'
 650 fi
 651
 652 # Some host OSes need non-standard checks for which CPU to use.
 653 # Note that these checks are broken for cross-compilation: if you're
 654 # cross-compiling to one of these OSes then you'll need to specify
 655 # the correct CPU with the --cpu option.
 656 case $targetos in
 657 Darwin)
 658   # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can
 659   # run 64-bit userspace code.
 660   # If the user didn't specify a CPU explicitly and the kernel says this is
 661   # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code.
 662   if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then
 663     cpu="x86_64"
 664   fi
 665   ;;
 666 SunOS)
 667   # $(uname -m) returns i86pc even on an x86_64 box, so default based on isainfo
 668   if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
 669     cpu="x86_64"
 670   fi
 671 esac
 672
 673 if test ! -z "$cpu" ; then
 674   # command line argument
 675   :
 676 elif check_define __i386__ ; then
 677   cpu="i386"
 678 elif check_define __x86_64__ ; then
 679   if check_define __ILP32__ ; then
 680     cpu="x32"
 681   else
 682     cpu="x86_64"
 683   fi
 684 elif check_define __sparc__ ; then
 685   if check_define __arch64__ ; then
 686     cpu="sparc64"
 687   else
 688     cpu="sparc"
 689   fi
 690 elif check_define _ARCH_PPC ; then
 691   if check_define _ARCH_PPC64 ; then
 692     cpu="ppc64"
 693   else
 694     cpu="ppc"
 695   fi
 696 elif check_define __mips__ ; then
 697   cpu="mips"
 698 elif check_define __s390__ ; then
 699   if check_define __s390x__ ; then
 700     cpu="s390x"
 701   else
 702     cpu="s390"
 703   fi
 704 elif check_define __arm__ ; then
 705   cpu="arm"
 706 elif check_define __aarch64__ ; then
 707   cpu="aarch64"
 708 else
 709   cpu=$(uname -m)
 710 fi
 711
 712 ARCH=
 713 # Normalise host CPU name and set ARCH.
 714 # Note that this case should only have supported host CPUs, not guests.
 715 case "$cpu" in
 716   ppc|ppc64|s390|s390x|sparc64|x32)
 717     cpu="$cpu"
 718     supported_cpu="yes"
 719     eval "cross_cc_${cpu}=\$host_cc"
 720   ;;
 721   i386|i486|i586|i686|i86pc|BePC)
 722     cpu="i386"
 723     supported_cpu="yes"
 724     cross_cc_i386=$host_cc
 725   ;;
 726   x86_64|amd64)
 727     cpu="x86_64"
 728     supported_cpu="yes"
 729     cross_cc_x86_64=$host_cc
 730   ;;
 731   armv*b|armv*l|arm)
 732     cpu="arm"
 733     supported_cpu="yes"
 734     cross_cc_arm=$host_cc
 735   ;;
 736   aarch64)
 737     cpu="aarch64"
 738     supported_cpu="yes"
 739     cross_cc_aarch64=$host_cc
 740   ;;
 741   mips*)
 742     cpu="mips"
 743     supported_cpu="yes"
 744     cross_cc_mips=$host_cc
 745   ;;
 746   sparc|sun4[cdmuv])
 747     cpu="sparc"
 748     supported_cpu="yes"
 749     cross_cc_sparc=$host_cc
 750   ;;
 751   *)
 752     # This will result in either an error or falling back to TCI later
 753     ARCH=unknown
 754   ;;
 755 esac
 756 if test -z "$ARCH"; then
 757   ARCH="$cpu"
 758 fi
 759
 760 # OS specific
 761
 762 # host *BSD for user mode
 763 HOST_VARIANT_DIR=""
 764
 765 case $targetos in
 766 MINGW32*)
 767   mingw32="yes"
 768   hax="yes"
 769   audio_possible_drivers="dsound sdl"
 770   if check_include dsound.h; then
 771     audio_drv_list="dsound"
 772   else
 773     audio_drv_list=""
 774   fi
 775   supported_os="yes"
 776 ;;
 777 GNU/kFreeBSD)
 778   bsd="yes"
 779   audio_drv_list="oss"
 780   audio_possible_drivers="oss sdl pa"
 781 ;;
 782 FreeBSD)
 783   bsd="yes"
 784   make="${MAKE-gmake}"
 785   audio_drv_list="oss"
 786   audio_possible_drivers="oss sdl pa"
 787   # needed for kinfo_getvmmap(3) in libutil.h
 788   LIBS="-lutil $LIBS"
 789   # needed for kinfo_getproc
 790   libs_qga="-lutil $libs_qga"
 791   netmap=""  # enable netmap autodetect
 792   HOST_VARIANT_DIR="freebsd"
 793   supported_os="yes"
 794 ;;
 795 DragonFly)
 796   bsd="yes"
 797   make="${MAKE-gmake}"
 798   audio_drv_list="oss"
 799   audio_possible_drivers="oss sdl pa"
 800   HOST_VARIANT_DIR="dragonfly"
 801 ;;
 802 NetBSD)
 803   bsd="yes"
 804   make="${MAKE-gmake}"
 805   audio_drv_list="oss"
 806   audio_possible_drivers="oss sdl"
 807   oss_lib="-lossaudio"
 808   HOST_VARIANT_DIR="netbsd"
 809   supported_os="yes"
 810 ;;
 811 OpenBSD)
 812   bsd="yes"
 813   make="${MAKE-gmake}"
 814   audio_drv_list="sdl"
 815   audio_possible_drivers="sdl"
 816   HOST_VARIANT_DIR="openbsd"
 817   supported_os="yes"
 818 ;;
 819 Darwin)
 820   bsd="yes"
 821   darwin="yes"
 822   hax="yes"
 823   hvf="yes"
 824   LDFLAGS_SHARED="-bundle -undefined dynamic_lookup"
 825   if [ "$cpu" = "x86_64" ] ; then
 826     QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
 827     LDFLAGS="-arch x86_64 $LDFLAGS"
 828   fi
 829   cocoa="yes"
 830   audio_drv_list="coreaudio"
 831   audio_possible_drivers="coreaudio sdl"
 832   LDFLAGS="-framework CoreFoundation -framework IOKit $LDFLAGS"
 833   libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
 834   # Disable attempts to use ObjectiveC features in os/object.h since they
 835   # won't work when we're compiling with gcc as a C compiler.
 836   QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
 837   HOST_VARIANT_DIR="darwin"
 838   supported_os="yes"
 839 ;;
 840 SunOS)
 841   solaris="yes"
 842   make="${MAKE-gmake}"
 843   install="${INSTALL-ginstall}"
 844   smbd="${SMBD-/usr/sfw/sbin/smbd}"
 845   if test -f /usr/include/sys/soundcard.h ; then
 846     audio_drv_list="oss"
 847   fi
 848   audio_possible_drivers="oss sdl"
 849 # needed for CMSG_ macros in sys/socket.h
 850   QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
 851 # needed for TIOCWIN* defines in termios.h
 852   QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS"
 853   QEMU_CFLAGS="-std=gnu99 $QEMU_CFLAGS"
 854   solarisnetlibs="-lsocket -lnsl -lresolv"
 855   LIBS="$solarisnetlibs $LIBS"
 856   libs_qga="$solarisnetlibs $libs_qga"
 857 ;;
 858 Haiku)
 859   haiku="yes"
 860   QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS"
 861   LIBS="-lposix_error_mapper -lnetwork $LIBS"
 862 ;;
 863 Linux)
 864   audio_drv_list="oss"
 865   audio_possible_drivers="oss alsa sdl pa"
 866   linux="yes"
 867   linux_user="yes"
 868   kvm="yes"
 869   vhost_net="yes"
 870   vhost_crypto="yes"
 871   vhost_scsi="yes"
 872   vhost_vsock="yes"
 873   QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers $QEMU_INCLUDES"
 874   supported_os="yes"
 875 ;;
 876 esac
 877
 878 if [ "$bsd" = "yes" ] ; then
 879   if [ "$darwin" != "yes" ] ; then
 880     bsd_user="yes"
 881   fi
 882 fi
 883
 884 : ${make=${MAKE-make}}
 885 : ${install=${INSTALL-install}}
 886 : ${python=${PYTHON-python}}
 887 : ${smbd=${SMBD-/usr/sbin/smbd}}
 888
 889 # Default objcc to clang if available, otherwise use CC
 890 if has clang; then
 891   objcc=clang
 892 else
 893   objcc="$cc"
 894 fi
 895
 896 if test "$mingw32" = "yes" ; then
 897   EXESUF=".exe"
 898   DSOSUF=".dll"
 899   QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
 900   # enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
 901   QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
 902   # MinGW needs -mthreads for TLS and macro _MT.
 903   QEMU_CFLAGS="-mthreads $QEMU_CFLAGS"
 904   LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS"
 905   write_c_skeleton;
 906   if compile_prog "" "-liberty" ; then
 907     LIBS="-liberty $LIBS"
 908   fi
 909   prefix="c:/Program Files/QEMU"
 910   mandir="\${prefix}"
 911   datadir="\${prefix}"
 912   qemu_docdir="\${prefix}"
 913   bindir="\${prefix}"
 914   sysconfdir="\${prefix}"
 915   local_statedir=
 916   confsuffix=""
 917   libs_qga="-lws2_32 -lwinmm -lpowrprof -lwtsapi32 -lwininet -liphlpapi -lnetapi32 $libs_qga"
 918 fi
 919
 920 werror=""
 921
 922 for opt do
 923   optarg=$(expr "x$opt" : 'x[^=]*=\(.*\)')
 924   case "$opt" in
 925   --help|-h) show_help=yes
 926   ;;
 927   --version|-V) exec cat $source_path/VERSION
 928   ;;
 929   --prefix=*) prefix="$optarg"
 930   ;;
 931   --interp-prefix=*) interp_prefix="$optarg"
 932   ;;
 933   --source-path=*)
 934   ;;
 935   --cross-prefix=*)
 936   ;;
 937   --cc=*)
 938   ;;
 939   --host-cc=*) host_cc="$optarg"
 940   ;;
 941   --cxx=*)
 942   ;;
 943   --iasl=*) iasl="$optarg"
 944   ;;
 945   --objcc=*) objcc="$optarg"
 946   ;;
 947   --make=*) make="$optarg"
 948   ;;
 949   --install=*) install="$optarg"
 950   ;;
 951   --python=*) python="$optarg"
 952   ;;
 953   --gcov=*) gcov_tool="$optarg"
 954   ;;
 955   --smbd=*) smbd="$optarg"
 956   ;;
 957   --extra-cflags=*)
 958   ;;
 959   --extra-cxxflags=*)
 960   ;;
 961   --extra-ldflags=*)
 962   ;;
 963   --enable-debug-info)
 964   ;;
 965   --disable-debug-info)
 966   ;;
 967   --cross-cc-*)
 968   ;;
 969   --enable-modules)
 970       modules="yes"
 971   ;;
 972   --disable-modules)
 973       modules="no"
 974   ;;
 975   --cpu=*)
 976   ;;
 977   --target-list=*) target_list="$optarg"
 978   ;;
 979   --enable-trace-backends=*) trace_backends="$optarg"
 980   ;;
 981   # XXX: backwards compatibility
 982   --enable-trace-backend=*) trace_backends="$optarg"
 983   ;;
 984   --with-trace-file=*) trace_file="$optarg"
 985   ;;
 986   --enable-gprof) gprof="yes"
 987   ;;
 988   --enable-gcov) gcov="yes"
 989   ;;
 990   --static)
 991     static="yes"
 992     LDFLAGS="-static $LDFLAGS"
 993     QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS"
 994   ;;
 995   --mandir=*) mandir="$optarg"
 996   ;;
 997   --bindir=*) bindir="$optarg"
 998   ;;
 999   --libdir=*) libdir="$optarg"
1000   ;;
1001   --libexecdir=*) libexecdir="$optarg"
1002   ;;
1003   --includedir=*) includedir="$optarg"
1004   ;;
1005   --datadir=*) datadir="$optarg"
1006   ;;
1007   --with-confsuffix=*) confsuffix="$optarg"
1008   ;;
1009   --docdir=*) qemu_docdir="$optarg"
1010   ;;
1011   --sysconfdir=*) sysconfdir="$optarg"
1012   ;;
1013   --localstatedir=*) local_statedir="$optarg"
1014   ;;
1015   --firmwarepath=*) firmwarepath="$optarg"
1016   ;;
1017   --host=*|--build=*|\
1018   --disable-dependency-tracking|\
1019   --sbindir=*|--sharedstatedir=*|\
1020   --oldincludedir=*|--datarootdir=*|--infodir=*|--localedir=*|\
1021   --htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*)
1022     # These switches are silently ignored, for compatibility with
1023     # autoconf-generated configure scripts. This allows QEMU's
1024     # configure to be used by RPM and similar macros that set
1025     # lots of directory switches by default.
1026   ;;
1027   --disable-sdl) sdl="no"
1028   ;;
1029   --enable-sdl) sdl="yes"
1030   ;;
1031   --with-sdlabi=*) sdlabi="$optarg"
1032   ;;
1033   --disable-qom-cast-debug) qom_cast_debug="no"
1034   ;;
1035   --enable-qom-cast-debug) qom_cast_debug="yes"
1036   ;;
1037   --disable-virtfs) virtfs="no"
1038   ;;
1039   --enable-virtfs) virtfs="yes"
1040   ;;
1041   --disable-mpath) mpath="no"
1042   ;;
1043   --enable-mpath) mpath="yes"
1044   ;;
1045   --disable-vnc) vnc="no"
1046   ;;
1047   --enable-vnc) vnc="yes"
1048   ;;
1049   --oss-lib=*) oss_lib="$optarg"
1050   ;;
1051   --audio-drv-list=*) audio_drv_list="$optarg"
1052   ;;
1053   --block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
1054   ;;
1055   --block-drv-ro-whitelist=*) block_drv_ro_whitelist=$(echo "$optarg" | sed -e 's/,/ /g')
1056   ;;
1057   --enable-debug-tcg) debug_tcg="yes"
1058   ;;
1059   --disable-debug-tcg) debug_tcg="no"
1060   ;;
1061   --enable-debug)
1062       # Enable debugging options that aren't excessively noisy
1063       debug_tcg="yes"
1064       debug_mutex="yes"
1065       debug="yes"
1066       strip_opt="no"
1067       fortify_source="no"
1068   ;;
1069   --enable-sanitizers) sanitizers="yes"
1070   ;;
1071   --disable-sanitizers) sanitizers="no"
1072   ;;
1073   --enable-sparse) sparse="yes"
1074   ;;
1075   --disable-sparse) sparse="no"
1076   ;;
1077   --disable-strip) strip_opt="no"
1078   ;;
1079   --disable-vnc-sasl) vnc_sasl="no"
1080   ;;
1081   --enable-vnc-sasl) vnc_sasl="yes"
1082   ;;
1083   --disable-vnc-jpeg) vnc_jpeg="no"
1084   ;;
1085   --enable-vnc-jpeg) vnc_jpeg="yes"
1086   ;;
1087   --disable-vnc-png) vnc_png="no"
1088   ;;
1089   --enable-vnc-png) vnc_png="yes"
1090   ;;
1091   --disable-slirp) slirp="no"
1092   ;;
1093   --disable-vde) vde="no"
1094   ;;
1095   --enable-vde) vde="yes"
1096   ;;
1097   --disable-netmap) netmap="no"
1098   ;;
1099   --enable-netmap) netmap="yes"
1100   ;;
1101   --disable-xen) xen="no"
1102   ;;
1103   --enable-xen) xen="yes"
1104   ;;
1105   --disable-xen-pci-passthrough) xen_pci_passthrough="no"
1106   ;;
1107   --enable-xen-pci-passthrough) xen_pci_passthrough="yes"
1108   ;;
1109   --disable-xen-pv-domain-build) xen_pv_domain_build="no"
1110   ;;
1111   --enable-xen-pv-domain-build) xen_pv_domain_build="yes"
1112   ;;
1113   --disable-brlapi) brlapi="no"
1114   ;;
1115   --enable-brlapi) brlapi="yes"
1116   ;;
1117   --disable-bluez) bluez="no"
1118   ;;
1119   --enable-bluez) bluez="yes"
1120   ;;
1121   --disable-kvm) kvm="no"
1122   ;;
1123   --enable-kvm) kvm="yes"
1124   ;;
1125   --disable-hax) hax="no"
1126   ;;
1127   --enable-hax) hax="yes"
1128   ;;
1129   --disable-hvf) hvf="no"
1130   ;;
1131   --enable-hvf) hvf="yes"
1132   ;;
1133   --disable-whpx) whpx="no"
1134   ;;
1135   --enable-whpx) whpx="yes"
1136   ;;
1137   --disable-tcg-interpreter) tcg_interpreter="no"
1138   ;;
1139   --enable-tcg-interpreter) tcg_interpreter="yes"
1140   ;;
1141   --disable-cap-ng)  cap_ng="no"
1142   ;;
1143   --enable-cap-ng) cap_ng="yes"
1144   ;;
1145   --disable-tcg) tcg="no"
1146   ;;
1147   --enable-tcg) tcg="yes"
1148   ;;
1149   --disable-malloc-trim) malloc_trim="no"
1150   ;;
1151   --enable-malloc-trim) malloc_trim="yes"
1152   ;;
1153   --disable-spice) spice="no"
1154   ;;
1155   --enable-spice) spice="yes"
1156   ;;
1157   --disable-libiscsi) libiscsi="no"
1158   ;;
1159   --enable-libiscsi) libiscsi="yes"
1160   ;;
1161   --disable-libnfs) libnfs="no"
1162   ;;
1163   --enable-libnfs) libnfs="yes"
1164   ;;
1165   --enable-profiler) profiler="yes"
1166   ;;
1167   --disable-cocoa) cocoa="no"
1168   ;;
1169   --enable-cocoa)
1170       cocoa="yes" ;
1171       audio_drv_list="coreaudio $(echo $audio_drv_list | sed s,coreaudio,,g)"
1172   ;;
1173   --disable-system) softmmu="no"
1174   ;;
1175   --enable-system) softmmu="yes"
1176   ;;
1177   --disable-user)
1178       linux_user="no" ;
1179       bsd_user="no" ;
1180   ;;
1181   --enable-user) ;;
1182   --disable-linux-user) linux_user="no"
1183   ;;
1184   --enable-linux-user) linux_user="yes"
1185   ;;
1186   --disable-bsd-user) bsd_user="no"
1187   ;;
1188   --enable-bsd-user) bsd_user="yes"
1189   ;;
1190   --enable-pie) pie="yes"
1191   ;;
1192   --disable-pie) pie="no"
1193   ;;
1194   --enable-werror) werror="yes"
1195   ;;
1196   --disable-werror) werror="no"
1197   ;;
1198   --enable-stack-protector) stack_protector="yes"
1199   ;;
1200   --disable-stack-protector) stack_protector="no"
1201   ;;
1202   --disable-curses) curses="no"
1203   ;;
1204   --enable-curses) curses="yes"
1205   ;;
1206   --disable-curl) curl="no"
1207   ;;
1208   --enable-curl) curl="yes"
1209   ;;
1210   --disable-fdt) fdt="no"
1211   ;;
1212   --enable-fdt) fdt="yes"
1213   ;;
1214   --disable-linux-aio) linux_aio="no"
1215   ;;
1216   --enable-linux-aio) linux_aio="yes"
1217   ;;
1218   --disable-attr) attr="no"
1219   ;;
1220   --enable-attr) attr="yes"
1221   ;;
1222   --disable-membarrier) membarrier="no"
1223   ;;
1224   --enable-membarrier) membarrier="yes"
1225   ;;
1226   --disable-blobs) blobs="no"
1227   ;;
1228   --with-pkgversion=*) pkgversion="$optarg"
1229   ;;
1230   --with-coroutine=*) coroutine="$optarg"
1231   ;;
1232   --disable-coroutine-pool) coroutine_pool="no"
1233   ;;
1234   --enable-coroutine-pool) coroutine_pool="yes"
1235   ;;
1236   --enable-debug-stack-usage) debug_stack_usage="yes"
1237   ;;
1238   --enable-crypto-afalg) crypto_afalg="yes"
1239   ;;
1240   --disable-crypto-afalg) crypto_afalg="no"
1241   ;;
1242   --disable-docs) docs="no"
1243   ;;
1244   --enable-docs) docs="yes"
1245   ;;
1246   --disable-vhost-net) vhost_net="no"
1247   ;;
1248   --enable-vhost-net) vhost_net="yes"
1249   ;;
1250   --disable-vhost-crypto) vhost_crypto="no"
1251   ;;
1252   --enable-vhost-crypto)
1253       vhost_crypto="yes"
1254       if test "$mingw32" = "yes"; then
1255           error_exit "vhost-crypto isn't available on win32"
1256       fi
1257   ;;
1258   --disable-vhost-scsi) vhost_scsi="no"
1259   ;;
1260   --enable-vhost-scsi) vhost_scsi="yes"
1261   ;;
1262   --disable-vhost-vsock) vhost_vsock="no"
1263   ;;
1264   --enable-vhost-vsock) vhost_vsock="yes"
1265   ;;
1266   --disable-opengl) opengl="no"
1267   ;;
1268   --enable-opengl) opengl="yes"
1269   ;;
1270   --disable-rbd) rbd="no"
1271   ;;
1272   --enable-rbd) rbd="yes"
1273   ;;
1274   --disable-xfsctl) xfs="no"
1275   ;;
1276   --enable-xfsctl) xfs="yes"
1277   ;;
1278   --disable-smartcard) smartcard="no"
1279   ;;
1280   --enable-smartcard) smartcard="yes"
1281   ;;
1282   --disable-libusb) libusb="no"
1283   ;;
1284   --enable-libusb) libusb="yes"
1285   ;;
1286   --disable-usb-redir) usb_redir="no"
1287   ;;
1288   --enable-usb-redir) usb_redir="yes"
1289   ;;
1290   --disable-zlib-test) zlib="no"
1291   ;;
1292   --disable-lzo) lzo="no"
1293   ;;
1294   --enable-lzo) lzo="yes"
1295   ;;
1296   --disable-snappy) snappy="no"
1297   ;;
1298   --enable-snappy) snappy="yes"
1299   ;;
1300   --disable-bzip2) bzip2="no"
1301   ;;
1302   --enable-bzip2) bzip2="yes"
1303   ;;
1304   --enable-guest-agent) guest_agent="yes"
1305   ;;
1306   --disable-guest-agent) guest_agent="no"
1307   ;;
1308   --enable-guest-agent-msi) guest_agent_msi="yes"
1309   ;;
1310   --disable-guest-agent-msi) guest_agent_msi="no"
1311   ;;
1312   --with-vss-sdk) vss_win32_sdk=""
1313   ;;
1314   --with-vss-sdk=*) vss_win32_sdk="$optarg"
1315   ;;
1316   --without-vss-sdk) vss_win32_sdk="no"
1317   ;;
1318   --with-win-sdk) win_sdk=""
1319   ;;
1320   --with-win-sdk=*) win_sdk="$optarg"
1321   ;;
1322   --without-win-sdk) win_sdk="no"
1323   ;;
1324   --enable-tools) want_tools="yes"
1325   ;;
1326   --disable-tools) want_tools="no"
1327   ;;
1328   --enable-seccomp) seccomp="yes"
1329   ;;
1330   --disable-seccomp) seccomp="no"
1331   ;;
1332   --disable-glusterfs) glusterfs="no"
1333   ;;
1334   --enable-glusterfs) glusterfs="yes"
1335   ;;
1336   --disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane)
1337       echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2
1338   ;;
1339   --enable-vhdx|--disable-vhdx)
1340       echo "$0: $opt is obsolete, VHDX driver is always built" >&2
1341   ;;
1342   --enable-uuid|--disable-uuid)
1343       echo "$0: $opt is obsolete, UUID support is always built" >&2
1344   ;;
1345   --disable-gtk) gtk="no"
1346   ;;
1347   --enable-gtk) gtk="yes"
1348   ;;
1349   --tls-priority=*) tls_priority="$optarg"
1350   ;;
1351   --disable-gnutls) gnutls="no"
1352   ;;
1353   --enable-gnutls) gnutls="yes"
1354   ;;
1355   --disable-nettle) nettle="no"
1356   ;;
1357   --enable-nettle) nettle="yes"
1358   ;;
1359   --disable-gcrypt) gcrypt="no"
1360   ;;
1361   --enable-gcrypt) gcrypt="yes"
1362   ;;
1363   --enable-rdma) rdma="yes"
1364   ;;
1365   --disable-rdma) rdma="no"
1366   ;;
1367   --enable-pvrdma) pvrdma="yes"
1368   ;;
1369   --disable-pvrdma) pvrdma="no"
1370   ;;
1371   --with-gtkabi=*) gtkabi="$optarg"
1372   ;;
1373   --disable-vte) vte="no"
1374   ;;
1375   --enable-vte) vte="yes"
1376   ;;
1377   --disable-virglrenderer) virglrenderer="no"
1378   ;;
1379   --enable-virglrenderer) virglrenderer="yes"
1380   ;;
1381   --disable-tpm) tpm="no"
1382   ;;
1383   --enable-tpm) tpm="yes"
1384   ;;
1385   --disable-libssh2) libssh2="no"
1386   ;;
1387   --enable-libssh2) libssh2="yes"
1388   ;;
1389   --disable-live-block-migration) live_block_migration="no"
1390   ;;
1391   --enable-live-block-migration) live_block_migration="yes"
1392   ;;
1393   --disable-numa) numa="no"
1394   ;;
1395   --enable-numa) numa="yes"
1396   ;;
1397   --disable-libxml2) libxml2="no"
1398   ;;
1399   --enable-libxml2) libxml2="yes"
1400   ;;
1401   --disable-tcmalloc) tcmalloc="no"
1402   ;;
1403   --enable-tcmalloc) tcmalloc="yes"
1404   ;;
1405   --disable-jemalloc) jemalloc="no"
1406   ;;
1407   --enable-jemalloc) jemalloc="yes"
1408   ;;
1409   --disable-replication) replication="no"
1410   ;;
1411   --enable-replication) replication="yes"
1412   ;;
1413   --disable-vxhs) vxhs="no"
1414   ;;
1415   --enable-vxhs) vxhs="yes"
1416   ;;
1417   --disable-vhost-user) vhost_user="no"
1418   ;;
1419   --enable-vhost-user)
1420       vhost_user="yes"
1421       if test "$mingw32" = "yes"; then
1422           error_exit "vhost-user isn't available on win32"
1423       fi
1424   ;;
1425   --disable-capstone) capstone="no"
1426   ;;
1427   --enable-capstone) capstone="yes"
1428   ;;
1429   --enable-capstone=git) capstone="git"
1430   ;;
1431   --enable-capstone=system) capstone="system"
1432   ;;
1433   --with-git=*) git="$optarg"
1434   ;;
1435   --enable-git-update) git_update=yes
1436   ;;
1437   --disable-git-update) git_update=no
1438   ;;
1439   --enable-debug-mutex) debug_mutex=yes
1440   ;;
1441   --disable-debug-mutex) debug_mutex=no
1442   ;;
1443   --enable-libpmem) libpmem=yes
1444   ;;
1445   --disable-libpmem) libpmem=no
1446   ;;
1447   *)
1448       echo "ERROR: unknown option $opt"
1449       echo "Try '$0 --help' for more information"
1450       exit 1
1451   ;;
1452   esac
1453 done
1454
1455 if test "$vhost_user" = ""; then
1456     if test "$mingw32" = "yes"; then
1457         vhost_user="no"
1458     else
1459         vhost_user="yes"
1460     fi
1461 fi
1462
1463 case "$cpu" in
1464     ppc)
1465            CPU_CFLAGS="-m32"
1466            LDFLAGS="-m32 $LDFLAGS"
1467            cross_cc_powerpc=$cc
1468            cross_cc_cflags_powerpc=$CPU_CFLAGS
1469            ;;
1470     ppc64)
1471            CPU_CFLAGS="-m64"
1472            LDFLAGS="-m64 $LDFLAGS"
1473            cross_cc_ppc64=$cc
1474            cross_cc_cflags_ppc64=$CPU_CFLAGS
1475            ;;
1476     sparc)
1477            CPU_CFLAGS="-m32 -mv8plus -mcpu=ultrasparc"
1478            LDFLAGS="-m32 -mv8plus $LDFLAGS"
1479            cross_cc_sparc=$cc
1480            cross_cc_cflags_sparc=$CPU_CFLAGS
1481            ;;
1482     sparc64)
1483            CPU_CFLAGS="-m64 -mcpu=ultrasparc"
1484            LDFLAGS="-m64 $LDFLAGS"
1485            cross_cc_sparc64=$cc
1486            cross_cc_cflags_sparc64=$CPU_CFLAGS
1487            ;;
1488     s390)
1489            CPU_CFLAGS="-m31"
1490            LDFLAGS="-m31 $LDFLAGS"
1491            cross_cc_s390=$cc
1492            cross_cc_cflags_s390=$CPU_CFLAGS
1493            ;;
1494     s390x)
1495            CPU_CFLAGS="-m64"
1496            LDFLAGS="-m64 $LDFLAGS"
1497            cross_cc_s390x=$cc
1498            cross_cc_cflags_s390x=$CPU_CFLAGS
1499            ;;
1500     i386)
1501            CPU_CFLAGS="-m32"
1502            LDFLAGS="-m32 $LDFLAGS"
1503            cross_cc_i386=$cc
1504            cross_cc_cflags_i386=$CPU_CFLAGS
1505            ;;
1506     x86_64)
1507            # ??? Only extremely old AMD cpus do not have cmpxchg16b.
1508            # If we truly care, we should simply detect this case at
1509            # runtime and generate the fallback to serial emulation.
1510            CPU_CFLAGS="-m64 -mcx16"
1511            LDFLAGS="-m64 $LDFLAGS"
1512            cross_cc_x86_64=$cc
1513            cross_cc_cflags_x86_64=$CPU_CFLAGS
1514            ;;
1515     x32)
1516            CPU_CFLAGS="-mx32"
1517            LDFLAGS="-mx32 $LDFLAGS"
1518            cross_cc_i386=$cc
1519            cross_cc_cflags_i386=$CPU_CFLAGS
1520            ;;
1521     # No special flags required for other host CPUs
1522 esac
1523
1524 QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS"
1525
1526 # For user-mode emulation the host arch has to be one we explicitly
1527 # support, even if we're using TCI.
1528 if [ "$ARCH" = "unknown" ]; then
1529   bsd_user="no"
1530   linux_user="no"
1531 fi
1532
1533 default_target_list=""
1534
1535 mak_wilds=""
1536
1537 if [ "$softmmu" = "yes" ]; then
1538     mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
1539 fi
1540 if [ "$linux_user" = "yes" ]; then
1541     mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
1542 fi
1543 if [ "$bsd_user" = "yes" ]; then
1544     mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
1545 fi
1546
1547 for config in $mak_wilds; do
1548     default_target_list="${default_target_list} $(basename "$config" .mak)"
1549 done
1550
1551 # Enumerate public trace backends for --help output
1552 trace_backend_list=$(echo $(grep -le '^PUBLIC = True$' "$source_path"/scripts/tracetool/backend/*.py | sed -e 's/^.*\/\(.*\)\.py$/\1/'))
1553
1554 if test x"$show_help" = x"yes" ; then
1555 cat << EOF
1556
1557 Usage: configure [options]
1558 Options: [defaults in brackets after descriptions]
1559
1560 Standard options:
1561   --help                   print this message
1562   --prefix=PREFIX          install in PREFIX [$prefix]
1563   --interp-prefix=PREFIX   where to find shared libraries, etc.
1564                            use %M for cpu name [$interp_prefix]
1565   --target-list=LIST       set target list (default: build everything)
1566 $(echo Available targets: $default_target_list | \
1567   fold -s -w 53 | sed -e 's/^/                           /')
1568
1569 Advanced options (experts only):
1570   --source-path=PATH       path of source code [$source_path]
1571   --cross-prefix=PREFIX    use PREFIX for compile tools [$cross_prefix]
1572   --cc=CC                  use C compiler CC [$cc]
1573   --iasl=IASL              use ACPI compiler IASL [$iasl]
1574   --host-cc=CC             use C compiler CC [$host_cc] for code run at
1575                            build time
1576   --cxx=CXX                use C++ compiler CXX [$cxx]
1577   --objcc=OBJCC            use Objective-C compiler OBJCC [$objcc]
1578   --extra-cflags=CFLAGS    append extra C compiler flags QEMU_CFLAGS
1579   --extra-cxxflags=CXXFLAGS append extra C++ compiler flags QEMU_CXXFLAGS
1580   --extra-ldflags=LDFLAGS  append extra linker flags LDFLAGS
1581   --cross-cc-ARCH=CC       use compiler when building ARCH guest test cases
1582   --cross-cc-flags-ARCH=   use compiler flags when building ARCH guest tests
1583   --make=MAKE              use specified make [$make]
1584   --install=INSTALL        use specified install [$install]
1585   --python=PYTHON          use specified python [$python]
1586   --smbd=SMBD              use specified smbd [$smbd]
1587   --with-git=GIT           use specified git [$git]
1588   --static                 enable static build [$static]
1589   --mandir=PATH            install man pages in PATH
1590   --datadir=PATH           install firmware in PATH$confsuffix
1591   --docdir=PATH            install documentation in PATH$confsuffix
1592   --bindir=PATH            install binaries in PATH
1593   --libdir=PATH            install libraries in PATH
1594   --libexecdir=PATH        install helper binaries in PATH
1595   --sysconfdir=PATH        install config in PATH$confsuffix
1596   --localstatedir=PATH     install local state in PATH (set at runtime on win32)
1597   --firmwarepath=PATH      search PATH for firmware files
1598   --with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix]
1599   --with-pkgversion=VERS   use specified string as sub-version of the package
1600   --enable-debug           enable common debug build options
1601   --enable-sanitizers      enable default sanitizers
1602   --disable-strip          disable stripping binaries
1603   --disable-werror         disable compilation abort on warning
1604   --disable-stack-protector disable compiler-provided stack protection
1605   --audio-drv-list=LIST    set audio drivers list:
1606                            Available drivers: $audio_possible_drivers
1607   --block-drv-whitelist=L  Same as --block-drv-rw-whitelist=L
1608   --block-drv-rw-whitelist=L
1609                            set block driver read-write whitelist
1610                            (affects only QEMU, not qemu-img)
1611   --block-drv-ro-whitelist=L
1612                            set block driver read-only whitelist
1613                            (affects only QEMU, not qemu-img)
1614   --enable-trace-backends=B Set trace backend
1615                            Available backends: $trace_backend_list
1616   --with-trace-file=NAME   Full PATH,NAME of file to store traces
1617                            Default:trace-<pid>
1618   --disable-slirp          disable SLIRP userspace network connectivity
1619   --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)
1620   --enable-malloc-trim     enable libc malloc_trim() for memory optimization
1621   --oss-lib                path to OSS library
1622   --cpu=CPU                Build for host CPU [$cpu]
1623   --with-coroutine=BACKEND coroutine backend. Supported options:
1624                            ucontext, sigaltstack, windows
1625   --enable-gcov            enable test coverage analysis with gcov
1626   --gcov=GCOV              use specified gcov [$gcov_tool]
1627   --disable-blobs          disable installing provided firmware blobs
1628   --with-vss-sdk=SDK-path  enable Windows VSS support in QEMU Guest Agent
1629   --with-win-sdk=SDK-path  path to Windows Platform SDK (to build VSS .tlb)
1630   --tls-priority           default TLS protocol/cipher priority string
1631   --enable-gprof           QEMU profiling with gprof
1632   --enable-profiler        profiler support
1633   --enable-xen-pv-domain-build
1634                            xen pv domain builder
1635   --enable-debug-stack-usage
1636                            track the maximum stack usage of stacks created by qemu_alloc_stack
1637
1638 Optional features, enabled with --enable-FEATURE and
1639 disabled with --disable-FEATURE, default is enabled if available:
1640
1641   system          all system emulation targets
1642   user            supported user emulation targets
1643   linux-user      all linux usermode emulation targets
1644   bsd-user        all BSD usermode emulation targets
1645   docs            build documentation
1646   guest-agent     build the QEMU Guest Agent
1647   guest-agent-msi build guest agent Windows MSI installation package
1648   pie             Position Independent Executables
1649   modules         modules support
1650   debug-tcg       TCG debugging (default is disabled)
1651   debug-info      debugging information
1652   sparse          sparse checker
1653
1654   gnutls          GNUTLS cryptography support
1655   nettle          nettle cryptography support
1656   gcrypt          libgcrypt cryptography support
1657   sdl             SDL UI
1658   --with-sdlabi     select preferred SDL ABI 1.2 or 2.0
1659   gtk             gtk UI
1660   --with-gtkabi     select preferred GTK ABI 2.0 or 3.0
1661   vte             vte support for the gtk UI
1662   curses          curses UI
1663   vnc             VNC UI support
1664   vnc-sasl        SASL encryption for VNC server
1665   vnc-jpeg        JPEG lossy compression for VNC server
1666   vnc-png         PNG compression for VNC server
1667   cocoa           Cocoa UI (Mac OS X only)
1668   virtfs          VirtFS
1669   mpath           Multipath persistent reservation passthrough
1670   xen             xen backend driver support
1671   xen-pci-passthrough    PCI passthrough support for Xen
1672   brlapi          BrlAPI (Braile)
1673   curl            curl connectivity
1674   membarrier      membarrier system call (for Linux 4.14+ or Windows)
1675   fdt             fdt device tree
1676   bluez           bluez stack connectivity
1677   kvm             KVM acceleration support
1678   hax             HAX acceleration support
1679   hvf             Hypervisor.framework acceleration support
1680   whpx            Windows Hypervisor Platform acceleration support
1681   rdma            Enable RDMA-based migration
1682   pvrdma          Enable PVRDMA support
1683   vde             support for vde network
1684   netmap          support for netmap network
1685   linux-aio       Linux AIO support
1686   cap-ng          libcap-ng support
1687   attr            attr and xattr support
1688   vhost-net       vhost-net acceleration support
1689   vhost-crypto    vhost-crypto acceleration support
1690   spice           spice
1691   rbd             rados block device (rbd)
1692   libiscsi        iscsi support
1693   libnfs          nfs support
1694   smartcard       smartcard support (libcacard)
1695   libusb          libusb (for usb passthrough)
1696   live-block-migration   Block migration in the main migration stream
1697   usb-redir       usb network redirection support
1698   lzo             support of lzo compression library
1699   snappy          support of snappy compression library
1700   bzip2           support of bzip2 compression library
1701                   (for reading bzip2-compressed dmg images)
1702   seccomp         seccomp support
1703   coroutine-pool  coroutine freelist (better performance)
1704   glusterfs       GlusterFS backend
1705   tpm             TPM support
1706   libssh2         ssh block device support
1707   numa            libnuma support
1708   libxml2         for Parallels image format
1709   tcmalloc        tcmalloc support
1710   jemalloc        jemalloc support
1711   replication     replication support
1712   vhost-vsock     virtio sockets device support
1713   opengl          opengl support
1714   virglrenderer   virgl rendering support
1715   xfsctl          xfsctl support
1716   qom-cast-debug  cast debugging support
1717   tools           build qemu-io, qemu-nbd and qemu-image tools
1718   vxhs            Veritas HyperScale vDisk backend support
1719   crypto-afalg    Linux AF_ALG crypto backend driver
1720   vhost-user      vhost-user support
1721   capstone        capstone disassembler support
1722   debug-mutex     mutex debugging support
1723   libpmem         libpmem support
1724
1725 NOTE: The object files are built at the place where configure is launched
1726 EOF
1727 exit 0
1728 fi
1729
1730 if ! has $python; then
1731   error_exit "Python not found. Use --python=/path/to/python"
1732 fi
1733
1734 # Note that if the Python conditional here evaluates True we will exit
1735 # with status 1 which is a shell 'false' value.
1736 if ! $python -c 'import sys; sys.exit(sys.version_info < (2,7))'; then
1737   error_exit "Cannot use '$python', Python 2 >= 2.7 or Python 3 is required." \
1738       "Use --python=/path/to/python to specify a supported Python."
1739 fi
1740
1741 # Suppress writing compiled files
1742 python="$python -B"
1743
1744 # Check that the C compiler works. Doing this here before testing
1745 # the host CPU ensures that we had a valid CC to autodetect the
1746 # $cpu var (and we should bail right here if that's not the case).
1747 # It also allows the help message to be printed without a CC.
1748 write_c_skeleton;
1749 if compile_object ; then
1750   : C compiler works ok
1751 else
1752     error_exit "\"$cc\" either does not exist or does not work"
1753 fi
1754 if ! compile_prog ; then
1755     error_exit "\"$cc\" cannot build an executable (is your linker broken?)"
1756 fi
1757
1758 # Now we have handled --enable-tcg-interpreter and know we're not just
1759 # printing the help message, bail out if the host CPU isn't supported.
1760 if test "$ARCH" = "unknown"; then
1761     if test "$tcg_interpreter" = "yes" ; then
1762         echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)"
1763     else
1764         error_exit "Unsupported CPU = $cpu, try --enable-tcg-interpreter"
1765     fi
1766 fi
1767
1768 # Consult white-list to determine whether to enable werror
1769 # by default.  Only enable by default for git builds
1770 if test -z "$werror" ; then
1771     if test -d "$source_path/.git" -a \
1772         \( "$linux" = "yes" -o "$mingw32" = "yes" \) ; then
1773         werror="yes"
1774     else
1775         werror="no"
1776     fi
1777 fi
1778
1779 if test "$bogus_os" = "yes"; then
1780     # Now that we know that we're not printing the help and that
1781     # the compiler works (so the results of the check_defines we used
1782     # to identify the OS are reliable), if we didn't recognize the
1783     # host OS we should stop now.
1784     error_exit "Unrecognized host OS (uname -s reports '$(uname -s)')"
1785 fi
1786
1787 gcc_flags="-Wold-style-declaration -Wold-style-definition -Wtype-limits"
1788 gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags"
1789 gcc_flags="-Wno-missing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
1790 gcc_flags="-Wendif-labels -Wno-shift-negative-value $gcc_flags"
1791 gcc_flags="-Wno-initializer-overrides -Wexpansion-to-defined $gcc_flags"
1792 gcc_flags="-Wno-string-plus-int $gcc_flags"
1793 gcc_flags="-Wno-error=address-of-packed-member $gcc_flags"
1794 # Note that we do not add -Werror to gcc_flags here, because that would
1795 # enable it for all configure tests. If a configure test failed due
1796 # to -Werror this would just silently disable some features,
1797 # so it's too error prone.
1798
1799 cc_has_warning_flag() {
1800     write_c_skeleton;
1801
1802     # Use the positive sense of the flag when testing for -Wno-wombat
1803     # support (gcc will happily accept the -Wno- form of unknown
1804     # warning options).
1805     optflag="$(echo $1 | sed -e 's/^-Wno-/-W/')"
1806     compile_prog "-Werror $optflag" ""
1807 }
1808
1809 for flag in $gcc_flags; do
1810     if cc_has_warning_flag $flag ; then
1811         QEMU_CFLAGS="$QEMU_CFLAGS $flag"
1812     fi
1813 done
1814
1815 if test "$stack_protector" != "no"; then
1816   cat > $TMPC << EOF
1817 int main(int argc, char *argv[])
1818 {
1819     char arr[64], *p = arr, *c = argv[0];
1820     while (*c) {
1821         *p++ = *c++;
1822     }
1823     return 0;
1824 }
1825 EOF
1826   gcc_flags="-fstack-protector-strong -fstack-protector-all"
1827   sp_on=0
1828   for flag in $gcc_flags; do
1829     # We need to check both a compile and a link, since some compiler
1830     # setups fail only on a .c->.o compile and some only at link time
1831     if do_cc $QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC &&
1832        compile_prog "-Werror $flag" ""; then
1833       QEMU_CFLAGS="$QEMU_CFLAGS $flag"
1834       sp_on=1
1835       break
1836     fi
1837   done
1838   if test "$stack_protector" = yes; then
1839     if test $sp_on = 0; then
1840       error_exit "Stack protector not supported"
1841     fi
1842   fi
1843 fi
1844
1845 # Disable -Wmissing-braces on older compilers that warn even for
1846 # the "universal" C zero initializer {0}.
1847 cat > $TMPC << EOF
1848 struct {
1849   int a[2];
1850 } x = {0};
1851 EOF
1852 if compile_object "-Werror" "" ; then
1853   :
1854 else
1855   QEMU_CFLAGS="$QEMU_CFLAGS -Wno-missing-braces"
1856 fi
1857
1858 # Workaround for http://gcc.gnu.org/PR55489.  Happens with -fPIE/-fPIC and
1859 # large functions that use global variables.  The bug is in all releases of
1860 # GCC, but it became particularly acute in 4.6.x and 4.7.x.  It is fixed in
1861 # 4.7.3 and 4.8.0.  We should be able to delete this at the end of 2013.
1862 cat > $TMPC << EOF
1863 #if __GNUC__ == 4 && (__GNUC_MINOR__ == 6 || (__GNUC_MINOR__ == 7 && __GNUC_PATCHLEVEL__ <= 2))
1864 int main(void) { return 0; }
1865 #else
1866 #error No bug in this compiler.
1867 #endif
1868 EOF
1869 if compile_prog "-Werror -fno-gcse" "" ; then
1870   TRANSLATE_OPT_CFLAGS=-fno-gcse
1871 fi
1872
1873 if test "$static" = "yes" ; then
1874   if test "$modules" = "yes" ; then
1875     error_exit "static and modules are mutually incompatible"
1876   fi
1877   if test "$pie" = "yes" ; then
1878     error_exit "static and pie are mutually incompatible"
1879   else
1880     pie="no"
1881   fi
1882 fi
1883
1884 # Unconditional check for compiler __thread support
1885   cat > $TMPC << EOF
1886 static __thread int tls_var;
1887 int main(void) { return tls_var; }
1888 EOF
1889
1890 if ! compile_prog "-Werror" "" ; then
1891     error_exit "Your compiler does not support the __thread specifier for " \
1892         "Thread-Local Storage (TLS). Please upgrade to a version that does."
1893 fi
1894
1895 if test "$pie" = ""; then
1896   case "$cpu-$targetos" in
1897     i386-Linux|x86_64-Linux|x32-Linux|i386-OpenBSD|x86_64-OpenBSD)
1898       ;;
1899     *)
1900       pie="no"
1901       ;;
1902   esac
1903 fi
1904
1905 if test "$pie" != "no" ; then
1906   cat > $TMPC << EOF
1907
1908 #ifdef __linux__
1909 #  define THREAD __thread
1910 #else
1911 #  define THREAD
1912 #endif
1913
1914 static THREAD int tls_var;
1915
1916 int main(void) { return tls_var; }
1917
1918 EOF
1919   if compile_prog "-fPIE -DPIE" "-pie"; then
1920     QEMU_CFLAGS="-fPIE -DPIE $QEMU_CFLAGS"
1921     LDFLAGS="-pie $LDFLAGS"
1922     pie="yes"
1923     if compile_prog "" "-Wl,-z,relro -Wl,-z,now" ; then
1924       LDFLAGS="-Wl,-z,relro -Wl,-z,now $LDFLAGS"
1925     fi
1926   else
1927     if test "$pie" = "yes"; then
1928       error_exit "PIE not available due to missing toolchain support"
1929     else
1930       echo "Disabling PIE due to missing toolchain support"
1931       pie="no"
1932     fi
1933   fi
1934
1935   if compile_prog "-Werror -fno-pie" "-nopie"; then
1936     CFLAGS_NOPIE="-fno-pie"
1937     LDFLAGS_NOPIE="-nopie"
1938   fi
1939 fi
1940
1941 ##########################################
1942 # __sync_fetch_and_and requires at least -march=i486. Many toolchains
1943 # use i686 as default anyway, but for those that don't, an explicit
1944 # specification is necessary
1945
1946 if test "$cpu" = "i386"; then
1947   cat > $TMPC << EOF
1948 static int sfaa(int *ptr)
1949 {
1950   return __sync_fetch_and_and(ptr, 0);
1951 }
1952
1953 int main(void)
1954 {
1955   int val = 42;
1956   val = __sync_val_compare_and_swap(&val, 0, 1);
1957   sfaa(&val);
1958   return val;
1959 }
1960 EOF
1961   if ! compile_prog "" "" ; then
1962     QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS"
1963   fi
1964 fi
1965
1966 #########################################
1967 # Solaris specific configure tool chain decisions
1968
1969 if test "$solaris" = "yes" ; then
1970   if has $install; then
1971     :
1972   else
1973     error_exit "Solaris install program not found. Use --install=/usr/ucb/install or" \
1974         "install fileutils from www.blastwave.org using pkg-get -i fileutils" \
1975         "to get ginstall which is used by default (which lives in /opt/csw/bin)"
1976   fi
1977   if test "$(path_of $install)" = "/usr/sbin/install" ; then
1978     error_exit "Solaris /usr/sbin/install is not an appropriate install program." \
1979         "try ginstall from the GNU fileutils available from www.blastwave.org" \
1980         "using pkg-get -i fileutils, or use --install=/usr/ucb/install"
1981   fi
1982   if has ar; then
1983     :
1984   else
1985     if test -f /usr/ccs/bin/ar ; then
1986       error_exit "No path includes ar" \
1987           "Add /usr/ccs/bin to your path and rerun configure"
1988     fi
1989     error_exit "No path includes ar"
1990   fi
1991 fi
1992
1993 if test -z "${target_list+xxx}" ; then
1994     for target in $default_target_list; do
1995         supported_target $target 2>/dev/null && \
1996             target_list="$target_list $target"
1997     done
1998     target_list="${target_list# }"
1999 else
2000     target_list=$(echo "$target_list" | sed -e 's/,/ /g')
2001     for target in $target_list; do
2002         # Check that we recognised the target name; this allows a more
2003         # friendly error message than if we let it fall through.
2004         case " $default_target_list " in
2005             *" $target "*)
2006                 ;;
2007             *)
2008                 error_exit "Unknown target name '$target'"
2009                 ;;
2010         esac
2011         supported_target $target || exit 1
2012     done
2013 fi
2014
2015 # see if system emulation was really requested
2016 case " $target_list " in
2017   *"-softmmu "*) softmmu=yes
2018   ;;
2019   *) softmmu=no
2020   ;;
2021 esac
2022
2023 feature_not_found() {
2024   feature=$1
2025   remedy=$2
2026
2027   error_exit "User requested feature $feature" \
2028       "configure was not able to find it." \
2029       "$remedy"
2030 }
2031
2032 # ---
2033 # big/little endian test
2034 cat > $TMPC << EOF
2035 short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
2036 short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
2037 extern int foo(short *, short *);
2038 int main(int argc, char *argv[]) {
2039     return foo(big_endian, little_endian);
2040 }
2041 EOF
2042
2043 if compile_object ; then
2044     if strings -a $TMPO | grep -q BiGeNdIaN ; then
2045         bigendian="yes"
2046     elif strings -a $TMPO | grep -q LiTtLeEnDiAn ; then
2047         bigendian="no"
2048     else
2049         echo big/little test failed
2050     fi
2051 else
2052     echo big/little test failed
2053 fi
2054
2055 ##########################################
2056 # cocoa implies not SDL or GTK
2057 # (the cocoa UI code currently assumes it is always the active UI
2058 # and doesn't interact well with other UI frontend code)
2059 if test "$cocoa" = "yes"; then
2060     if test "$sdl" = "yes"; then
2061         error_exit "Cocoa and SDL UIs cannot both be enabled at once"
2062     fi
2063     if test "$gtk" = "yes"; then
2064         error_exit "Cocoa and GTK UIs cannot both be enabled at once"
2065     fi
2066     gtk=no
2067     sdl=no
2068 fi
2069
2070 # Some versions of Mac OS X incorrectly define SIZE_MAX
2071 cat > $TMPC << EOF
2072 #include <stdint.h>
2073 #include <stdio.h>
2074 int main(int argc, char *argv[]) {
2075     return printf("%zu", SIZE_MAX);
2076 }
2077 EOF
2078 have_broken_size_max=no
2079 if ! compile_object -Werror ; then
2080     have_broken_size_max=yes
2081 fi
2082
2083 ##########################################
2084 # L2TPV3 probe
2085
2086 cat > $TMPC <<EOF
2087 #include <sys/socket.h>
2088 #include <linux/ip.h>
2089 int main(void) { return sizeof(struct mmsghdr); }
2090 EOF
2091 if compile_prog "" "" ; then
2092   l2tpv3=yes
2093 else
2094   l2tpv3=no
2095 fi
2096
2097 ##########################################
2098 # MinGW / Mingw-w64 localtime_r/gmtime_r check
2099
2100 if test "$mingw32" = "yes"; then
2101     # Some versions of MinGW / Mingw-w64 lack localtime_r
2102     # and gmtime_r entirely.
2103     #
2104     # Some versions of Mingw-w64 define a macro for
2105     # localtime_r/gmtime_r.
2106     #
2107     # Some versions of Mingw-w64 will define functions
2108     # for localtime_r/gmtime_r, but only if you have
2109     # _POSIX_THREAD_SAFE_FUNCTIONS defined. For fun
2110     # though, unistd.h and pthread.h both define
2111     # that for you.
2112     #
2113     # So this #undef localtime_r and #include <unistd.h>
2114     # are not in fact redundant.
2115 cat > $TMPC << EOF
2116 #include <unistd.h>
2117 #include <time.h>
2118 #undef localtime_r
2119 int main(void) { localtime_r(NULL, NULL); return 0; }
2120 EOF
2121     if compile_prog "" "" ; then
2122         localtime_r="yes"
2123     else
2124         localtime_r="no"
2125     fi
2126 fi
2127
2128 ##########################################
2129 # pkg-config probe
2130
2131 if ! has "$pkg_config_exe"; then
2132   error_exit "pkg-config binary '$pkg_config_exe' not found"
2133 fi
2134
2135 ##########################################
2136 # NPTL probe
2137
2138 if test "$linux_user" = "yes"; then
2139   cat > $TMPC <<EOF
2140 #include <sched.h>
2141 #include <linux/futex.h>
2142 int main(void) {
2143 #if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT)
2144 #error bork
2145 #endif
2146   return 0;
2147 }
2148 EOF
2149   if ! compile_object ; then
2150     feature_not_found "nptl" "Install glibc and linux kernel headers."
2151   fi
2152 fi
2153
2154 #########################################
2155 # zlib check
2156
2157 if test "$zlib" != "no" ; then
2158     cat > $TMPC << EOF
2159 #include <zlib.h>
2160 int main(void) { zlibVersion(); return 0; }
2161 EOF
2162     if compile_prog "" "-lz" ; then
2163         :
2164     else
2165         error_exit "zlib check failed" \
2166             "Make sure to have the zlib libs and headers installed."
2167     fi
2168 fi
2169 LIBS="$LIBS -lz"
2170
2171 ##########################################
2172 # lzo check
2173
2174 if test "$lzo" != "no" ; then
2175     cat > $TMPC << EOF
2176 #include <lzo/lzo1x.h>
2177 int main(void) { lzo_version(); return 0; }
2178 EOF
2179     if compile_prog "" "-llzo2" ; then
2180         libs_softmmu="$libs_softmmu -llzo2"
2181         lzo="yes"
2182     else
2183         if test "$lzo" = "yes"; then
2184             feature_not_found "liblzo2" "Install liblzo2 devel"
2185         fi
2186         lzo="no"
2187     fi
2188 fi
2189
2190 ##########################################
2191 # snappy check
2192
2193 if test "$snappy" != "no" ; then
2194     cat > $TMPC << EOF
2195 #include <snappy-c.h>
2196 int main(void) { snappy_max_compressed_length(4096); return 0; }
2197 EOF
2198     if compile_prog "" "-lsnappy" ; then
2199         libs_softmmu="$libs_softmmu -lsnappy"
2200         snappy="yes"
2201     else
2202         if test "$snappy" = "yes"; then
2203             feature_not_found "libsnappy" "Install libsnappy devel"
2204         fi
2205         snappy="no"
2206     fi
2207 fi
2208
2209 ##########################################
2210 # bzip2 check
2211
2212 if test "$bzip2" != "no" ; then
2213     cat > $TMPC << EOF
2214 #include <bzlib.h>
2215 int main(void) { BZ2_bzlibVersion(); return 0; }
2216 EOF
2217     if compile_prog "" "-lbz2" ; then
2218         bzip2="yes"
2219     else
2220         if test "$bzip2" = "yes"; then
2221             feature_not_found "libbzip2" "Install libbzip2 devel"
2222         fi
2223         bzip2="no"
2224     fi
2225 fi
2226
2227 ##########################################
2228 # libseccomp check
2229
2230 libseccomp_minver="2.2.0"
2231 if test "$seccomp" != "no" ; then
2232     case "$cpu" in
2233     i386|x86_64|mips)
2234         ;;
2235     arm|aarch64)
2236         libseccomp_minver="2.2.3"
2237         ;;
2238     ppc|ppc64|s390x)
2239         libseccomp_minver="2.3.0"
2240         ;;
2241     *)
2242         libseccomp_minver=""
2243         ;;
2244     esac
2245
2246     if test "$libseccomp_minver" != "" &&
2247        $pkg_config --atleast-version=$libseccomp_minver libseccomp ; then
2248         seccomp_cflags="$($pkg_config --cflags libseccomp)"
2249         seccomp_libs="$($pkg_config --libs libseccomp)"
2250         seccomp="yes"
2251     else
2252         if test "$seccomp" = "yes" ; then
2253             if test "$libseccomp_minver" != "" ; then
2254                 feature_not_found "libseccomp" \
2255                     "Install libseccomp devel >= $libseccomp_minver"
2256             else
2257                 feature_not_found "libseccomp" \
2258                     "libseccomp is not supported for host cpu $cpu"
2259             fi
2260         fi
2261         seccomp="no"
2262     fi
2263 fi
2264 ##########################################
2265 # xen probe
2266
2267 if test "$xen" != "no" ; then
2268   # Check whether Xen library path is specified via --extra-ldflags to avoid
2269   # overriding this setting with pkg-config output. If not, try pkg-config
2270   # to obtain all needed flags.
2271
2272   if ! echo $EXTRA_LDFLAGS | grep tools/libxc > /dev/null && \
2273      $pkg_config --exists xencontrol ; then
2274     xen_ctrl_version="$(printf '%d%02d%02d' \
2275       $($pkg_config --modversion xencontrol | sed 's/\./ /g') )"
2276     xen=yes
2277     xen_pc="xencontrol xenstore xenguest xenforeignmemory xengnttab"
2278     xen_pc="$xen_pc xenevtchn xendevicemodel"
2279     if $pkg_config --exists xentoolcore; then
2280       xen_pc="$xen_pc xentoolcore"
2281     fi
2282     QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags $xen_pc)"
2283     libs_softmmu="$($pkg_config --libs $xen_pc) $libs_softmmu"
2284     LDFLAGS="$($pkg_config --libs $xen_pc) $LDFLAGS"
2285   else
2286
2287     xen_libs="-lxenstore -lxenctrl -lxenguest"
2288     xen_stable_libs="-lxenforeignmemory -lxengnttab -lxenevtchn"
2289
2290     # First we test whether Xen headers and libraries are available.
2291     # If no, we are done and there is no Xen support.
2292     # If yes, more tests are run to detect the Xen version.
2293
2294     # Xen (any)
2295     cat > $TMPC <<EOF
2296 #include <xenctrl.h>
2297 int main(void) {
2298   return 0;
2299 }
2300 EOF
2301     if ! compile_prog "" "$xen_libs" ; then
2302       # Xen not found
2303       if test "$xen" = "yes" ; then
2304         feature_not_found "xen" "Install xen devel"
2305       fi
2306       xen=no
2307
2308     # Xen unstable
2309     elif
2310         cat > $TMPC <<EOF &&
2311 #undef XC_WANT_COMPAT_DEVICEMODEL_API
2312 #define __XEN_TOOLS__
2313 #include <xendevicemodel.h>
2314 #include <xenforeignmemory.h>
2315 int main(void) {
2316   xendevicemodel_handle *xd;
2317   xenforeignmemory_handle *xfmem;
2318
2319   xd = xendevicemodel_open(0, 0);
2320   xendevicemodel_pin_memory_cacheattr(xd, 0, 0, 0, 0);
2321
2322   xfmem = xenforeignmemory_open(0, 0);
2323   xenforeignmemory_map_resource(xfmem, 0, 0, 0, 0, 0, NULL, 0, 0);
2324
2325   return 0;
2326 }
2327 EOF
2328         compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
2329       then
2330       xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
2331       xen_ctrl_version=41100
2332       xen=yes
2333     elif
2334         cat > $TMPC <<EOF &&
2335 #undef XC_WANT_COMPAT_MAP_FOREIGN_API
2336 #include <xenforeignmemory.h>
2337 #include <xentoolcore.h>
2338 int main(void) {
2339   xenforeignmemory_handle *xfmem;
2340
2341   xfmem = xenforeignmemory_open(0, 0);
2342   xenforeignmemory_map2(xfmem, 0, 0, 0, 0, 0, 0, 0);
2343   xentoolcore_restrict_all(0);
2344
2345   return 0;
2346 }
2347 EOF
2348         compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs -lxentoolcore"
2349       then
2350       xen_stable_libs="-lxendevicemodel $xen_stable_libs -lxentoolcore"
2351       xen_ctrl_version=41000
2352       xen=yes
2353     elif
2354         cat > $TMPC <<EOF &&
2355 #undef XC_WANT_COMPAT_DEVICEMODEL_API
2356 #define __XEN_TOOLS__
2357 #include <xendevicemodel.h>
2358 int main(void) {
2359   xendevicemodel_handle *xd;
2360
2361   xd = xendevicemodel_open(0, 0);
2362   xendevicemodel_close(xd);
2363
2364   return 0;
2365 }
2366 EOF
2367         compile_prog "" "$xen_libs -lxendevicemodel $xen_stable_libs"
2368       then
2369       xen_stable_libs="-lxendevicemodel $xen_stable_libs"
2370       xen_ctrl_version=40900
2371       xen=yes
2372     elif
2373         cat > $TMPC <<EOF &&
2374 /*
2375  * If we have stable libs the we don't want the libxc compat
2376  * layers, regardless of what CFLAGS we may have been given.
2377  *
2378  * Also, check if xengnttab_grant_copy_segment_t is defined and
2379  * grant copy operation is implemented.
2380  */
2381 #undef XC_WANT_COMPAT_EVTCHN_API
2382 #undef XC_WANT_COMPAT_GNTTAB_API
2383 #undef XC_WANT_COMPAT_MAP_FOREIGN_API
2384 #include <xenctrl.h>
2385 #include <xenstore.h>
2386 #include <xenevtchn.h>
2387 #include <xengnttab.h>
2388 #include <xenforeignmemory.h>
2389 #include <stdint.h>
2390 #include <xen/hvm/hvm_info_table.h>
2391 #if !defined(HVM_MAX_VCPUS)
2392 # error HVM_MAX_VCPUS not defined
2393 #endif
2394 int main(void) {
2395   xc_interface *xc = NULL;
2396   xenforeignmemory_handle *xfmem;
2397   xenevtchn_handle *xe;
2398   xengnttab_handle *xg;
2399   xen_domain_handle_t handle;
2400   xengnttab_grant_copy_segment_t* seg = NULL;
2401
2402   xs_daemon_open();
2403
2404   xc = xc_interface_open(0, 0, 0);
2405   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2406   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2407   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2408   xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
2409   xc_domain_create(xc, 0, handle, 0, NULL, NULL);
2410
2411   xfmem = xenforeignmemory_open(0, 0);
2412   xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
2413
2414   xe = xenevtchn_open(0, 0);
2415   xenevtchn_fd(xe);
2416
2417   xg = xengnttab_open(0, 0);
2418   xengnttab_grant_copy(xg, 0, seg);
2419
2420   return 0;
2421 }
2422 EOF
2423         compile_prog "" "$xen_libs $xen_stable_libs"
2424       then
2425       xen_ctrl_version=40800
2426       xen=yes
2427     elif
2428         cat > $TMPC <<EOF &&
2429 /*
2430  * If we have stable libs the we don't want the libxc compat
2431  * layers, regardless of what CFLAGS we may have been given.
2432  */
2433 #undef XC_WANT_COMPAT_EVTCHN_API
2434 #undef XC_WANT_COMPAT_GNTTAB_API
2435 #undef XC_WANT_COMPAT_MAP_FOREIGN_API
2436 #include <xenctrl.h>
2437 #include <xenstore.h>
2438 #include <xenevtchn.h>
2439 #include <xengnttab.h>
2440 #include <xenforeignmemory.h>
2441 #include <stdint.h>
2442 #include <xen/hvm/hvm_info_table.h>
2443 #if !defined(HVM_MAX_VCPUS)
2444 # error HVM_MAX_VCPUS not defined
2445 #endif
2446 int main(void) {
2447   xc_interface *xc = NULL;
2448   xenforeignmemory_handle *xfmem;
2449   xenevtchn_handle *xe;
2450   xengnttab_handle *xg;
2451   xen_domain_handle_t handle;
2452
2453   xs_daemon_open();
2454
2455   xc = xc_interface_open(0, 0, 0);
2456   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2457   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2458   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2459   xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
2460   xc_domain_create(xc, 0, handle, 0, NULL, NULL);
2461
2462   xfmem = xenforeignmemory_open(0, 0);
2463   xenforeignmemory_map(xfmem, 0, 0, 0, 0, 0);
2464
2465   xe = xenevtchn_open(0, 0);
2466   xenevtchn_fd(xe);
2467
2468   xg = xengnttab_open(0, 0);
2469   xengnttab_map_grant_ref(xg, 0, 0, 0);
2470
2471   return 0;
2472 }
2473 EOF
2474         compile_prog "" "$xen_libs $xen_stable_libs"
2475       then
2476       xen_ctrl_version=40701
2477       xen=yes
2478     elif
2479         cat > $TMPC <<EOF &&
2480 #include <xenctrl.h>
2481 #include <stdint.h>
2482 int main(void) {
2483   xc_interface *xc = NULL;
2484   xen_domain_handle_t handle;
2485   xc_domain_create(xc, 0, handle, 0, NULL, NULL);
2486   return 0;
2487 }
2488 EOF
2489         compile_prog "" "$xen_libs"
2490       then
2491       xen_ctrl_version=40700
2492       xen=yes
2493
2494     # Xen 4.6
2495     elif
2496         cat > $TMPC <<EOF &&
2497 #include <xenctrl.h>
2498 #include <xenstore.h>
2499 #include <stdint.h>
2500 #include <xen/hvm/hvm_info_table.h>
2501 #if !defined(HVM_MAX_VCPUS)
2502 # error HVM_MAX_VCPUS not defined
2503 #endif
2504 int main(void) {
2505   xc_interface *xc;
2506   xs_daemon_open();
2507   xc = xc_interface_open(0, 0, 0);
2508   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2509   xc_gnttab_open(NULL, 0);
2510   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2511   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2512   xc_hvm_create_ioreq_server(xc, 0, HVM_IOREQSRV_BUFIOREQ_ATOMIC, NULL);
2513   xc_reserved_device_memory_map(xc, 0, 0, 0, 0, NULL, 0);
2514   return 0;
2515 }
2516 EOF
2517         compile_prog "" "$xen_libs"
2518       then
2519       xen_ctrl_version=40600
2520       xen=yes
2521
2522     # Xen 4.5
2523     elif
2524         cat > $TMPC <<EOF &&
2525 #include <xenctrl.h>
2526 #include <xenstore.h>
2527 #include <stdint.h>
2528 #include <xen/hvm/hvm_info_table.h>
2529 #if !defined(HVM_MAX_VCPUS)
2530 # error HVM_MAX_VCPUS not defined
2531 #endif
2532 int main(void) {
2533   xc_interface *xc;
2534   xs_daemon_open();
2535   xc = xc_interface_open(0, 0, 0);
2536   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2537   xc_gnttab_open(NULL, 0);
2538   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2539   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2540   xc_hvm_create_ioreq_server(xc, 0, 0, NULL);
2541   return 0;
2542 }
2543 EOF
2544         compile_prog "" "$xen_libs"
2545       then
2546       xen_ctrl_version=40500
2547       xen=yes
2548
2549     elif
2550         cat > $TMPC <<EOF &&
2551 #include <xenctrl.h>
2552 #include <xenstore.h>
2553 #include <stdint.h>
2554 #include <xen/hvm/hvm_info_table.h>
2555 #if !defined(HVM_MAX_VCPUS)
2556 # error HVM_MAX_VCPUS not defined
2557 #endif
2558 int main(void) {
2559   xc_interface *xc;
2560   xs_daemon_open();
2561   xc = xc_interface_open(0, 0, 0);
2562   xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
2563   xc_gnttab_open(NULL, 0);
2564   xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
2565   xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
2566   return 0;
2567 }
2568 EOF
2569         compile_prog "" "$xen_libs"
2570       then
2571       xen_ctrl_version=40200
2572       xen=yes
2573
2574     else
2575       if test "$xen" = "yes" ; then
2576         feature_not_found "xen (unsupported version)" \
2577                           "Install a supported xen (xen 4.2 or newer)"
2578       fi
2579       xen=no
2580     fi
2581
2582     if test "$xen" = yes; then
2583       if test $xen_ctrl_version -ge 40701  ; then
2584         libs_softmmu="$xen_stable_libs $libs_softmmu"
2585       fi
2586       libs_softmmu="$xen_libs $libs_softmmu"
2587     fi
2588   fi
2589 fi
2590
2591 if test "$xen_pci_passthrough" != "no"; then
2592   if test "$xen" = "yes" && test "$linux" = "yes"; then
2593     xen_pci_passthrough=yes
2594   else
2595     if test "$xen_pci_passthrough" = "yes"; then
2596       error_exit "User requested feature Xen PCI Passthrough" \
2597           " but this feature requires /sys from Linux"
2598     fi
2599     xen_pci_passthrough=no
2600   fi
2601 fi
2602
2603 if test "$xen_pv_domain_build" = "yes" &&
2604    test "$xen" != "yes"; then
2605     error_exit "User requested Xen PV domain builder support" \
2606                "which requires Xen support."
2607 fi
2608
2609 ##########################################
2610 # Windows Hypervisor Platform accelerator (WHPX) check
2611 if test "$whpx" != "no" ; then
2612     if check_include "WinHvPlatform.h" && check_include "WinHvEmulation.h"; then
2613         whpx="yes"
2614     else
2615         if test "$whpx" = "yes"; then
2616             feature_not_found "WinHvPlatform" "WinHvEmulation is not installed"
2617         fi
2618         whpx="no"
2619     fi
2620 fi
2621
2622 ##########################################
2623 # Sparse probe
2624 if test "$sparse" != "no" ; then
2625   if has cgcc; then
2626     sparse=yes
2627   else
2628     if test "$sparse" = "yes" ; then
2629       feature_not_found "sparse" "Install sparse binary"
2630     fi
2631     sparse=no
2632   fi
2633 fi
2634
2635 ##########################################
2636 # X11 probe
2637 if $pkg_config --exists "x11"; then
2638     have_x11=yes
2639     x11_cflags=$($pkg_config --cflags x11)
2640     x11_libs=$($pkg_config --libs x11)
2641 fi
2642
2643 ##########################################
2644 # GTK probe
2645
2646 if test "$gtk" != "no"; then
2647     if test "$gtkabi" = ""; then
2648         # The GTK ABI was not specified explicitly, so try whether 3.0 is available.
2649         # Use 2.0 as a fallback if that is available.
2650         if $pkg_config --exists "gtk+-3.0 >= 3.0.0"; then
2651             gtkabi=3.0
2652         elif $pkg_config --exists "gtk+-2.0 >= 2.18.0"; then
2653             gtkabi=2.0
2654         else
2655             gtkabi=3.0
2656         fi
2657     fi
2658     gtkpackage="gtk+-$gtkabi"
2659     gtkx11package="gtk+-x11-$gtkabi"
2660     if test "$gtkabi" = "3.0" ; then
2661       gtkversion="3.0.0"
2662     else
2663       gtkversion="2.18.0"
2664     fi
2665     if $pkg_config --exists "$gtkpackage >= $gtkversion"; then
2666         gtk_cflags=$($pkg_config --cflags $gtkpackage)
2667         gtk_libs=$($pkg_config --libs $gtkpackage)
2668         gtk_version=$($pkg_config --modversion $gtkpackage)
2669         if $pkg_config --exists "$gtkx11package >= $gtkversion"; then
2670             need_x11=yes
2671             gtk_cflags="$gtk_cflags $x11_cflags"
2672             gtk_libs="$gtk_libs $x11_libs"
2673         fi
2674         gtk="yes"
2675     elif test "$gtk" = "yes"; then
2676         feature_not_found "gtk" "Install gtk3-devel"
2677     else
2678         gtk="no"
2679     fi
2680 fi
2681
2682
2683 ##########################################
2684 # GNUTLS probe
2685
2686 gnutls_works() {
2687     # Unfortunately some distros have bad pkg-config information for gnutls
2688     # such that it claims to exist but you get a compiler error if you try
2689     # to use the options returned by --libs. Specifically, Ubuntu for --static
2690     # builds doesn't work:
2691     # https://bugs.launchpad.net/ubuntu/+source/gnutls26/+bug/1478035
2692     #
2693     # So sanity check the cflags/libs before assuming gnutls can be used.
2694     if ! $pkg_config --exists "gnutls"; then
2695         return 1
2696     fi
2697
2698     write_c_skeleton
2699     compile_prog "$($pkg_config --cflags gnutls)" "$($pkg_config --libs gnutls)"
2700 }
2701
2702 gnutls_gcrypt=no
2703 gnutls_nettle=no
2704 if test "$gnutls" != "no"; then
2705     if gnutls_works; then
2706         gnutls_cflags=$($pkg_config --cflags gnutls)
2707         gnutls_libs=$($pkg_config --libs gnutls)
2708         libs_softmmu="$gnutls_libs $libs_softmmu"
2709         libs_tools="$gnutls_libs $libs_tools"
2710         QEMU_CFLAGS="$QEMU_CFLAGS $gnutls_cflags"
2711         gnutls="yes"
2712
2713         # gnutls_rnd requires >= 2.11.0
2714         if $pkg_config --exists "gnutls >= 2.11.0"; then
2715             gnutls_rnd="yes"
2716         else
2717             gnutls_rnd="no"
2718         fi
2719
2720         if $pkg_config --exists 'gnutls >= 3.0'; then
2721             gnutls_gcrypt=no
2722             gnutls_nettle=yes
2723         elif $pkg_config --exists 'gnutls >= 2.12'; then
2724             case $($pkg_config --libs --static gnutls) in
2725                 *gcrypt*)
2726                     gnutls_gcrypt=yes
2727                     gnutls_nettle=no
2728                     ;;
2729                 *nettle*)
2730                     gnutls_gcrypt=no
2731                     gnutls_nettle=yes
2732                     ;;
2733                 *)
2734                     gnutls_gcrypt=yes
2735                     gnutls_nettle=no
2736                     ;;
2737             esac
2738         else
2739             gnutls_gcrypt=yes
2740             gnutls_nettle=no
2741         fi
2742     elif test "$gnutls" = "yes"; then
2743         feature_not_found "gnutls" "Install gnutls devel"
2744     else
2745         gnutls="no"
2746         gnutls_rnd="no"
2747     fi
2748 else
2749     gnutls_rnd="no"
2750 fi
2751
2752
2753 # If user didn't give a --disable/enable-gcrypt flag,
2754 # then mark as disabled if user requested nettle
2755 # explicitly, or if gnutls links to nettle
2756 if test -z "$gcrypt"
2757 then
2758     if test "$nettle" = "yes" || test "$gnutls_nettle" = "yes"
2759     then
2760         gcrypt="no"
2761     fi
2762 fi
2763
2764 # If user didn't give a --disable/enable-nettle flag,
2765 # then mark as disabled if user requested gcrypt
2766 # explicitly, or if gnutls links to gcrypt
2767 if test -z "$nettle"
2768 then
2769     if test "$gcrypt" = "yes" || test "$gnutls_gcrypt" = "yes"
2770     then
2771         nettle="no"
2772     fi
2773 fi
2774
2775 has_libgcrypt_config() {
2776     if ! has "libgcrypt-config"
2777     then
2778         return 1
2779     fi
2780
2781     if test -n "$cross_prefix"
2782     then
2783         host=$(libgcrypt-config --host)
2784         if test "$host-" != $cross_prefix
2785         then
2786             return 1
2787         fi
2788     fi
2789
2790     return 0
2791 }
2792
2793 if test "$gcrypt" != "no"; then
2794     if has_libgcrypt_config; then
2795         gcrypt_cflags=$(libgcrypt-config --cflags)
2796         gcrypt_libs=$(libgcrypt-config --libs)
2797         # Debian has remove -lgpg-error from libgcrypt-config
2798         # as it "spreads unnecessary dependencies" which in
2799         # turn breaks static builds...
2800         if test "$static" = "yes"
2801         then
2802             gcrypt_libs="$gcrypt_libs -lgpg-error"
2803         fi
2804         libs_softmmu="$gcrypt_libs $libs_softmmu"
2805         libs_tools="$gcrypt_libs $libs_tools"
2806         QEMU_CFLAGS="$QEMU_CFLAGS $gcrypt_cflags"
2807         gcrypt="yes"
2808         if test -z "$nettle"; then
2809            nettle="no"
2810         fi
2811
2812         cat > $TMPC << EOF
2813 #include <gcrypt.h>
2814 int main(void) {
2815   gcry_kdf_derive(NULL, 0, GCRY_KDF_PBKDF2,
2816                   GCRY_MD_SHA256,
2817                   NULL, 0, 0, 0, NULL);
2818  return 0;
2819 }
2820 EOF
2821         if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
2822             gcrypt_kdf=yes
2823         fi
2824
2825         cat > $TMPC << EOF
2826 #include <gcrypt.h>
2827 int main(void) {
2828   gcry_mac_hd_t handle;
2829   gcry_mac_open(&handle, GCRY_MAC_HMAC_MD5,
2830                 GCRY_MAC_FLAG_SECURE, NULL);
2831   return 0;
2832 }
2833 EOF
2834         if compile_prog "$gcrypt_cflags" "$gcrypt_libs" ; then
2835             gcrypt_hmac=yes
2836         fi
2837     else
2838         if test "$gcrypt" = "yes"; then
2839             feature_not_found "gcrypt" "Install gcrypt devel"
2840         else
2841             gcrypt="no"
2842         fi
2843     fi
2844 fi
2845
2846
2847 if test "$nettle" != "no"; then
2848     if $pkg_config --exists "nettle"; then
2849         nettle_cflags=$($pkg_config --cflags nettle)
2850         nettle_libs=$($pkg_config --libs nettle)
2851         nettle_version=$($pkg_config --modversion nettle)
2852         libs_softmmu="$nettle_libs $libs_softmmu"
2853         libs_tools="$nettle_libs $libs_tools"
2854         QEMU_CFLAGS="$QEMU_CFLAGS $nettle_cflags"
2855         nettle="yes"
2856
2857         cat > $TMPC << EOF
2858 #include <stddef.h>
2859 #include <nettle/pbkdf2.h>
2860 int main(void) {
2861      pbkdf2_hmac_sha256(8, NULL, 1000, 8, NULL, 8, NULL);
2862      return 0;
2863 }
2864 EOF
2865         if compile_prog "$nettle_cflags" "$nettle_libs" ; then
2866             nettle_kdf=yes
2867         fi
2868     else
2869         if test "$nettle" = "yes"; then
2870             feature_not_found "nettle" "Install nettle devel"
2871         else
2872             nettle="no"
2873         fi
2874     fi
2875 fi
2876
2877 if test "$gcrypt" = "yes" && test "$nettle" = "yes"
2878 then
2879     error_exit "Only one of gcrypt & nettle can be enabled"
2880 fi
2881
2882 ##########################################
2883 # libtasn1 - only for the TLS creds/session test suite
2884
2885 tasn1=yes
2886 tasn1_cflags=""
2887 tasn1_libs=""
2888 if $pkg_config --exists "libtasn1"; then
2889     tasn1_cflags=$($pkg_config --cflags libtasn1)
2890     tasn1_libs=$($pkg_config --libs libtasn1)
2891 else
2892     tasn1=no
2893 fi
2894
2895
2896 ##########################################
2897 # getifaddrs (for tests/test-io-channel-socket )
2898
2899 have_ifaddrs_h=yes
2900 if ! check_include "ifaddrs.h" ; then
2901   have_ifaddrs_h=no
2902 fi
2903
2904 ##########################################
2905 # VTE probe
2906
2907 if test "$vte" != "no"; then
2908     if test "$gtkabi" = "3.0"; then
2909       vteminversion="0.32.0"
2910       if $pkg_config --exists "vte-2.91"; then
2911         vtepackage="vte-2.91"
2912       else
2913         vtepackage="vte-2.90"
2914       fi
2915     else
2916       vtepackage="vte"
2917       vteminversion="0.24.0"
2918     fi
2919     if $pkg_config --exists "$vtepackage >= $vteminversion"; then
2920         vte_cflags=$($pkg_config --cflags $vtepackage)
2921         vte_libs=$($pkg_config --libs $vtepackage)
2922         vteversion=$($pkg_config --modversion $vtepackage)
2923         vte="yes"
2924     elif test "$vte" = "yes"; then
2925         if test "$gtkabi" = "3.0"; then
2926             feature_not_found "vte" "Install libvte-2.90/2.91 devel"
2927         else
2928             feature_not_found "vte" "Install libvte devel"
2929         fi
2930     else
2931         vte="no"
2932     fi
2933 fi
2934
2935 ##########################################
2936 # SDL probe
2937
2938 # Look for sdl configuration program (pkg-config or sdl-config).  Try
2939 # sdl-config even without cross prefix, and favour pkg-config over sdl-config.
2940
2941 sdl_probe ()
2942 {
2943   sdl_too_old=no
2944   if test "$sdlabi" = ""; then
2945       if $pkg_config --exists "sdl2"; then
2946           sdlabi=2.0
2947       elif $pkg_config --exists "sdl"; then
2948           sdlabi=1.2
2949       else
2950           sdlabi=2.0
2951       fi
2952   fi
2953
2954   if test $sdlabi = "2.0"; then
2955       sdl_config=$sdl2_config
2956       sdlname=sdl2
2957       sdlconfigname=sdl2_config
2958   elif test $sdlabi = "1.2"; then
2959       sdlname=sdl
2960       sdlconfigname=sdl_config
2961   else
2962       error_exit "Unknown sdlabi $sdlabi, must be 1.2 or 2.0"
2963   fi
2964
2965   if test "$(basename $sdl_config)" != $sdlconfigname && ! has ${sdl_config}; then
2966     sdl_config=$sdlconfigname
2967   fi
2968
2969   if $pkg_config $sdlname --exists; then
2970     sdlconfig="$pkg_config $sdlname"
2971     sdlversion=$($sdlconfig --modversion 2>/dev/null)
2972   elif has ${sdl_config}; then
2973     sdlconfig="$sdl_config"
2974     sdlversion=$($sdlconfig --version)
2975   else
2976     if test "$sdl" = "yes" ; then
2977       feature_not_found "sdl" "Install SDL2-devel"
2978     fi
2979     sdl=no
2980     # no need to do the rest
2981     return
2982   fi
2983   if test -n "$cross_prefix" && test "$(basename "$sdlconfig")" = sdl-config; then
2984     echo warning: using "\"$sdlconfig\"" to detect cross-compiled sdl >&2
2985   fi
2986
2987   cat > $TMPC << EOF
2988 #include <SDL.h>
2989 #undef main /* We don't want SDL to override our main() */
2990 int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
2991 EOF
2992   sdl_cflags=$($sdlconfig --cflags 2>/dev/null)
2993   sdl_cflags="$sdl_cflags -Wno-undef"  # workaround 2.0.8 bug
2994   if test "$static" = "yes" ; then
2995     if $pkg_config $sdlname --exists; then
2996       sdl_libs=$($pkg_config $sdlname --static --libs 2>/dev/null)
2997     else
2998       sdl_libs=$($sdlconfig --static-libs 2>/dev/null)
2999     fi
3000   else
3001     sdl_libs=$($sdlconfig --libs 2>/dev/null)
3002   fi
3003   if compile_prog "$sdl_cflags" "$sdl_libs" ; then
3004     if test $(echo $sdlversion | sed 's/[^0-9]//g') -lt 121 ; then
3005       sdl_too_old=yes
3006     else
3007       sdl=yes
3008     fi
3009
3010     # static link with sdl ? (note: sdl.pc's --static --libs is broken)
3011     if test "$sdl" = "yes" -a "$static" = "yes" ; then
3012       if test $? = 0 && echo $sdl_libs | grep -- -laa > /dev/null; then
3013          sdl_libs="$sdl_libs $(aalib-config --static-libs 2>/dev/null)"
3014          sdl_cflags="$sdl_cflags $(aalib-config --cflags 2>/dev/null)"
3015       fi
3016       if compile_prog "$sdl_cflags" "$sdl_libs" ; then
3017         :
3018       else
3019         sdl=no
3020       fi
3021     fi # static link
3022   else # sdl not found
3023     if test "$sdl" = "yes" ; then
3024       feature_not_found "sdl" "Install SDL devel"
3025     fi
3026     sdl=no
3027   fi # sdl compile test
3028 }
3029
3030 if test "$sdl" != "no" ; then
3031   sdl_probe
3032 fi
3033
3034 if test "$sdl" = "yes" ; then
3035   cat > $TMPC <<EOF
3036 #include <SDL.h>
3037 #if defined(SDL_VIDEO_DRIVER_X11)
3038 #include <X11/XKBlib.h>
3039 #else
3040 #error No x11 support
3041 #endif
3042 int main(void) { return 0; }
3043 EOF
3044   if compile_prog "$sdl_cflags $x11_cflags" "$sdl_libs $x11_libs" ; then
3045     need_x11=yes
3046     sdl_cflags="$sdl_cflags $x11_cflags"
3047     sdl_libs="$sdl_libs $x11_libs"
3048   fi
3049 fi
3050
3051 ##########################################
3052 # RDMA needs OpenFabrics libraries
3053 if test "$rdma" != "no" ; then
3054   cat > $TMPC <<EOF
3055 #include <rdma/rdma_cma.h>
3056 int main(void) { return 0; }
3057 EOF
3058   rdma_libs="-lrdmacm -libverbs -libumad"
3059   if compile_prog "" "$rdma_libs" ; then
3060     rdma="yes"
3061     libs_softmmu="$libs_softmmu $rdma_libs"
3062   else
3063     if test "$rdma" = "yes" ; then
3064         error_exit \
3065             " OpenFabrics librdmacm/libibverbs/libibumad not present." \
3066             " Your options:" \
3067             "  (1) Fast: Install infiniband packages (devel) from your distro." \
3068             "  (2) Cleanest: Install libraries from www.openfabrics.org" \
3069             "  (3) Also: Install softiwarp if you don't have RDMA hardware"
3070     fi
3071     rdma="no"
3072   fi
3073 fi
3074
3075 ##########################################
3076 # PVRDMA detection
3077
3078 cat > $TMPC <<EOF &&
3079 #include <sys/mman.h>
3080
3081 int
3082 main(void)
3083 {
3084     char buf = 0;
3085     void *addr = &buf;
3086     addr = mremap(addr, 0, 1, MREMAP_MAYMOVE | MREMAP_FIXED);
3087
3088     return 0;
3089 }
3090 EOF
3091
3092 if test "$rdma" = "yes" ; then
3093     case "$pvrdma" in
3094     "")
3095         if compile_prog "" ""; then
3096             pvrdma="yes"
3097         else
3098             pvrdma="no"
3099         fi
3100         ;;
3101     "yes")
3102         if ! compile_prog "" ""; then
3103             error_exit "PVRDMA is not supported since mremap is not implemented"
3104         fi
3105         pvrdma="yes"
3106         ;;
3107     "no")
3108         pvrdma="no"
3109         ;;
3110     esac
3111 else
3112     if test "$pvrdma" = "yes" ; then
3113         error_exit "PVRDMA requires rdma suppport"
3114     fi
3115     pvrdma="no"
3116 fi
3117
3118 ##########################################
3119 # VNC SASL detection
3120 if test "$vnc" = "yes" -a "$vnc_sasl" != "no" ; then
3121   cat > $TMPC <<EOF
3122 #include <sasl/sasl.h>
3123 #include <stdio.h>
3124 int main(void) { sasl_server_init(NULL, "qemu"); return 0; }
3125 EOF
3126   # Assuming Cyrus-SASL installed in /usr prefix
3127   vnc_sasl_cflags=""
3128   vnc_sasl_libs="-lsasl2"
3129   if compile_prog "$vnc_sasl_cflags" "$vnc_sasl_libs" ; then
3130     vnc_sasl=yes
3131     libs_softmmu="$vnc_sasl_libs $libs_softmmu"
3132     QEMU_CFLAGS="$QEMU_CFLAGS $vnc_sasl_cflags"
3133   else
3134     if test "$vnc_sasl" = "yes" ; then
3135       feature_not_found "vnc-sasl" "Install Cyrus SASL devel"
3136     fi
3137     vnc_sasl=no
3138   fi
3139 fi
3140
3141 ##########################################
3142 # VNC JPEG detection
3143 if test "$vnc" = "yes" -a "$vnc_jpeg" != "no" ; then
3144 cat > $TMPC <<EOF
3145 #include <stdio.h>
3146 #include <jpeglib.h>
3147 int main(void) { struct jpeg_compress_struct s; jpeg_create_compress(&s); return 0; }
3148 EOF
3149     vnc_jpeg_cflags=""
3150     vnc_jpeg_libs="-ljpeg"
3151   if compile_prog "$vnc_jpeg_cflags" "$vnc_jpeg_libs" ; then
3152     vnc_jpeg=yes
3153     libs_softmmu="$vnc_jpeg_libs $libs_softmmu"
3154     QEMU_CFLAGS="$QEMU_CFLAGS $vnc_jpeg_cflags"
3155   else
3156     if test "$vnc_jpeg" = "yes" ; then
3157       feature_not_found "vnc-jpeg" "Install libjpeg-turbo devel"
3158     fi
3159     vnc_jpeg=no
3160   fi
3161 fi
3162
3163 ##########################################
3164 # VNC PNG detection
3165 if test "$vnc" = "yes" -a "$vnc_png" != "no" ; then
3166 cat > $TMPC <<EOF
3167 //#include <stdio.h>
3168 #include <png.h>
3169 #include <stddef.h>
3170 int main(void) {
3171     png_structp png_ptr;
3172     png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL);
3173     return png_ptr != 0;
3174 }
3175 EOF
3176   if $pkg_config libpng --exists; then
3177     vnc_png_cflags=$($pkg_config libpng --cflags)
3178     vnc_png_libs=$($pkg_config libpng --libs)
3179   else
3180     vnc_png_cflags=""
3181     vnc_png_libs="-lpng"
3182   fi
3183   if compile_prog "$vnc_png_cflags" "$vnc_png_libs" ; then
3184     vnc_png=yes
3185     libs_softmmu="$vnc_png_libs $libs_softmmu"
3186     QEMU_CFLAGS="$QEMU_CFLAGS $vnc_png_cflags"
3187   else
3188     if test "$vnc_png" = "yes" ; then
3189       feature_not_found "vnc-png" "Install libpng devel"
3190     fi
3191     vnc_png=no
3192   fi
3193 fi
3194
3195 ##########################################
3196 # xkbcommon probe
3197 if test "$xkbcommon" != "no" ; then
3198   if $pkg_config xkbcommon --exists; then
3199     xkbcommon_cflags=$($pkg_config xkbcommon --cflags)
3200     xkbcommon_libs=$($pkg_config xkbcommon --libs)
3201     xkbcommon=yes
3202   else
3203     if test "$xkbcommon" = "yes" ; then
3204       feature_not_found "xkbcommon" "Install libxkbcommon-devel"
3205     fi
3206     xkbcommon=no
3207   fi
3208 fi
3209
3210 ##########################################
3211 # fnmatch() probe, used for ACL routines
3212 fnmatch="no"
3213 cat > $TMPC << EOF
3214 #include <fnmatch.h>
3215 int main(void)
3216 {
3217     fnmatch("foo", "foo", 0);
3218     return 0;
3219 }
3220 EOF
3221 if compile_prog "" "" ; then
3222    fnmatch="yes"
3223 fi
3224
3225 ##########################################
3226 # xfsctl() probe, used for file-posix.c
3227 if test "$xfs" != "no" ; then
3228   cat > $TMPC << EOF
3229 #include <stddef.h>  /* NULL */
3230 #include <xfs/xfs.h>
3231 int main(void)
3232 {
3233     xfsctl(NULL, 0, 0, NULL);
3234     return 0;
3235 }
3236 EOF
3237   if compile_prog "" "" ; then
3238     xfs="yes"
3239   else
3240     if test "$xfs" = "yes" ; then
3241       feature_not_found "xfs" "Instal xfsprogs/xfslibs devel"
3242     fi
3243     xfs=no
3244   fi
3245 fi
3246
3247 ##########################################
3248 # vde libraries probe
3249 if test "$vde" != "no" ; then
3250   vde_libs="-lvdeplug"
3251   cat > $TMPC << EOF
3252 #include <libvdeplug.h>
3253 int main(void)
3254 {
3255     struct vde_open_args a = {0, 0, 0};
3256     char s[] = "";
3257     vde_open(s, s, &a);
3258     return 0;
3259 }
3260 EOF
3261   if compile_prog "" "$vde_libs" ; then
3262     vde=yes
3263   else
3264     if test "$vde" = "yes" ; then
3265       feature_not_found "vde" "Install vde (Virtual Distributed Ethernet) devel"
3266     fi
3267     vde=no
3268   fi
3269 fi
3270
3271 ##########################################
3272 # netmap support probe
3273 # Apart from looking for netmap headers, we make sure that the host API version
3274 # supports the netmap backend (>=11). The upper bound (15) is meant to simulate
3275 # a minor/major version number. Minor new features will be marked with values up
3276 # to 15, and if something happens that requires a change to the backend we will
3277 # move above 15, submit the backend fixes and modify this two bounds.
3278 if test "$netmap" != "no" ; then
3279   cat > $TMPC << EOF
3280 #include <inttypes.h>
3281 #include <net/if.h>
3282 #include <net/netmap.h>
3283 #include <net/netmap_user.h>
3284 #if (NETMAP_API < 11) || (NETMAP_API > 15)
3285 #error
3286 #endif
3287 int main(void) { return 0; }
3288 EOF
3289   if compile_prog "" "" ; then
3290     netmap=yes
3291   else
3292     if test "$netmap" = "yes" ; then
3293       feature_not_found "netmap"
3294     fi
3295     netmap=no
3296   fi
3297 fi
3298
3299 ##########################################
3300 # libcap-ng library probe
3301 if test "$cap_ng" != "no" ; then
3302   cap_libs="-lcap-ng"
3303   cat > $TMPC << EOF
3304 #include <cap-ng.h>
3305 int main(void)
3306 {
3307     capng_capability_to_name(CAPNG_EFFECTIVE);
3308     return 0;
3309 }
3310 EOF
3311   if compile_prog "" "$cap_libs" ; then
3312     cap_ng=yes
3313     libs_tools="$cap_libs $libs_tools"
3314   else
3315     if test "$cap_ng" = "yes" ; then
3316       feature_not_found "cap_ng" "Install libcap-ng devel"
3317     fi
3318     cap_ng=no
3319   fi
3320 fi
3321
3322 ##########################################
3323 # Sound support libraries probe
3324
3325 audio_drv_probe()
3326 {
3327     drv=$1
3328     hdr=$2
3329     lib=$3
3330     exp=$4
3331     cfl=$5
3332         cat > $TMPC << EOF
3333 #include <$hdr>
3334 int main(void) { $exp }
3335 EOF
3336     if compile_prog "$cfl" "$lib" ; then
3337         :
3338     else
3339         error_exit "$drv check failed" \
3340             "Make sure to have the $drv libs and headers installed."
3341     fi
3342 }
3343
3344 audio_drv_list=$(echo "$audio_drv_list" | sed -e 's/,/ /g')
3345 for drv in $audio_drv_list; do
3346     case $drv in
3347     alsa)
3348     audio_drv_probe $drv alsa/asoundlib.h -lasound \
3349         "return snd_pcm_close((snd_pcm_t *)0);"
3350     alsa_libs="-lasound"
3351     ;;
3352
3353     pa)
3354     audio_drv_probe $drv pulse/pulseaudio.h "-lpulse" \
3355         "pa_context_set_source_output_volume(NULL, 0, NULL, NULL, NULL); return 0;"
3356     pulse_libs="-lpulse"
3357     audio_pt_int="yes"
3358     ;;
3359
3360     sdl)
3361     if test "$sdl" = "no"; then
3362         error_exit "sdl not found or disabled, can not use sdl audio driver"
3363     fi
3364     ;;
3365
3366     coreaudio)
3367       coreaudio_libs="-framework CoreAudio"
3368     ;;
3369
3370     dsound)
3371       dsound_libs="-lole32 -ldxguid"
3372       audio_win_int="yes"
3373     ;;
3374
3375     oss)
3376       oss_libs="$oss_lib"
3377     ;;
3378
3379     wav)
3380     # XXX: Probes for CoreAudio, DirectSound
3381     ;;
3382
3383     *)
3384     echo "$audio_possible_drivers" | grep -q "\<$drv\>" || {
3385         error_exit "Unknown driver '$drv' selected" \
3386             "Possible drivers are: $audio_possible_drivers"
3387     }
3388     ;;
3389     esac
3390 done
3391
3392 ##########################################
3393 # BrlAPI probe
3394
3395 if test "$brlapi" != "no" ; then
3396   brlapi_libs="-lbrlapi"
3397   cat > $TMPC << EOF
3398 #include <brlapi.h>
3399 #include <stddef.h>
3400 int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); }
3401 EOF
3402   if compile_prog "" "$brlapi_libs" ; then
3403     brlapi=yes
3404   else
3405     if test "$brlapi" = "yes" ; then
3406       feature_not_found "brlapi" "Install brlapi devel"
3407     fi
3408     brlapi=no
3409   fi
3410 fi
3411
3412 ##########################################
3413 # curses probe
3414 if test "$curses" != "no" ; then
3415   if test "$mingw32" = "yes" ; then
3416     curses_inc_list="$($pkg_config --cflags ncurses 2>/dev/null):"
3417     curses_lib_list="$($pkg_config --libs ncurses 2>/dev/null):-lpdcurses"
3418   else
3419     curses_inc_list="$($pkg_config --cflags ncursesw 2>/dev/null):-I/usr/include/ncursesw:"
3420     curses_lib_list="$($pkg_config --libs ncursesw 2>/dev/null):-lncursesw:-lcursesw"
3421   fi
3422   curses_found=no
3423   cat > $TMPC << EOF
3424 #include <locale.h>
3425 #include <curses.h>
3426 #include <wchar.h>
3427 int main(void) {
3428   wchar_t wch = L'w';
3429   setlocale(LC_ALL, "");
3430   resize_term(0, 0);
3431   addwstr(L"wide chars\n");
3432   addnwstr(&wch, 1);
3433   add_wch(WACS_DEGREE);
3434   return 0;
3435 }
3436 EOF
3437   IFS=:
3438   for curses_inc in $curses_inc_list; do
3439     # Make sure we get the wide character prototypes
3440     curses_inc="-DNCURSES_WIDECHAR $curses_inc"
3441     IFS=:
3442     for curses_lib in $curses_lib_list; do
3443       unset IFS
3444       if compile_prog "$curses_inc" "$curses_lib" ; then
3445         curses_found=yes
3446         break
3447       fi
3448     done
3449     if test "$curses_found" = yes ; then
3450       break
3451     fi
3452   done
3453   unset IFS
3454   if test "$curses_found" = "yes" ; then
3455     curses=yes
3456   else
3457     if test "$curses" = "yes" ; then
3458       feature_not_found "curses" "Install ncurses devel"
3459     fi
3460     curses=no
3461   fi
3462 fi
3463
3464 ##########################################
3465 # curl probe
3466 if test "$curl" != "no" ; then
3467   if $pkg_config libcurl --exists; then
3468     curlconfig="$pkg_config libcurl"
3469   else
3470     curlconfig=curl-config
3471   fi
3472   cat > $TMPC << EOF
3473 #include <curl/curl.h>
3474 int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; }
3475 EOF
3476   curl_cflags=$($curlconfig --cflags 2>/dev/null)
3477   curl_libs=$($curlconfig --libs 2>/dev/null)
3478   if compile_prog "$curl_cflags" "$curl_libs" ; then
3479     curl=yes
3480   else
3481     if test "$curl" = "yes" ; then
3482       feature_not_found "curl" "Install libcurl devel"
3483     fi
3484     curl=no
3485   fi
3486 fi # test "$curl"
3487
3488 ##########################################
3489 # bluez support probe
3490 if test "$bluez" != "no" ; then
3491   cat > $TMPC << EOF
3492 #include <bluetooth/bluetooth.h>
3493 int main(void) { return bt_error(0); }
3494 EOF
3495   bluez_cflags=$($pkg_config --cflags bluez 2>/dev/null)
3496   bluez_libs=$($pkg_config --libs bluez 2>/dev/null)
3497   if compile_prog "$bluez_cflags" "$bluez_libs" ; then
3498     bluez=yes
3499     libs_softmmu="$bluez_libs $libs_softmmu"
3500   else
3501     if test "$bluez" = "yes" ; then
3502       feature_not_found "bluez" "Install bluez-libs/libbluetooth devel"
3503     fi
3504     bluez="no"
3505   fi
3506 fi
3507
3508 ##########################################
3509 # glib support probe
3510
3511 glib_req_ver=2.40
3512 glib_modules=gthread-2.0
3513 if test "$modules" = yes; then
3514     glib_modules="$glib_modules gmodule-export-2.0"
3515 fi
3516
3517 # This workaround is required due to a bug in pkg-config file for glib as it
3518 # doesn't define GLIB_STATIC_COMPILATION for pkg-config --static
3519
3520 if test "$static" = yes -a "$mingw32" = yes; then
3521     QEMU_CFLAGS="-DGLIB_STATIC_COMPILATION $QEMU_CFLAGS"
3522 fi
3523
3524 for i in $glib_modules; do
3525     if $pkg_config --atleast-version=$glib_req_ver $i; then
3526         glib_cflags=$($pkg_config --cflags $i)
3527         glib_libs=$($pkg_config --libs $i)
3528         QEMU_CFLAGS="$glib_cflags $QEMU_CFLAGS"
3529         LIBS="$glib_libs $LIBS"
3530         libs_qga="$glib_libs $libs_qga"
3531     else
3532         error_exit "glib-$glib_req_ver $i is required to compile QEMU"
3533     fi
3534 done
3535
3536 # Sanity check that the current size_t matches the
3537 # size that glib thinks it should be. This catches
3538 # problems on multi-arch where people try to build
3539 # 32-bit QEMU while pointing at 64-bit glib headers
3540 cat > $TMPC <<EOF
3541 #include <glib.h>
3542 #include <unistd.h>
3543
3544 #define QEMU_BUILD_BUG_ON(x) \
3545   typedef char qemu_build_bug_on[(x)?-1:1] __attribute__((unused));
3546
3547 int main(void) {
3548    QEMU_BUILD_BUG_ON(sizeof(size_t) != GLIB_SIZEOF_SIZE_T);
3549    return 0;
3550 }
3551 EOF
3552
3553 if ! compile_prog "$CFLAGS" "$LIBS" ; then
3554     error_exit "sizeof(size_t) doesn't match GLIB_SIZEOF_SIZE_T."\
3555                "You probably need to set PKG_CONFIG_LIBDIR"\
3556                "to point to the right pkg-config files for your"\
3557                "build target"
3558 fi
3559
3560 # g_test_trap_subprocess added in 2.38. Used by some tests.
3561 glib_subprocess=yes
3562 if ! $pkg_config --atleast-version=2.38 glib-2.0; then
3563     glib_subprocess=no
3564 fi
3565
3566 # Silence clang 3.5.0 warnings about glib attribute __alloc_size__ usage
3567 cat > $TMPC << EOF
3568 #include <glib.h>
3569 int main(void) { return 0; }
3570 EOF
3571 if ! compile_prog "$glib_cflags -Werror" "$glib_libs" ; then
3572     if cc_has_warning_flag "-Wno-unknown-attributes"; then
3573         glib_cflags="-Wno-unknown-attributes $glib_cflags"
3574         CFLAGS="-Wno-unknown-attributes $CFLAGS"
3575     fi
3576 fi
3577
3578 ##########################################
3579 # SHA command probe for modules
3580 if test "$modules" = yes; then
3581     shacmd_probe="sha1sum sha1 shasum"
3582     for c in $shacmd_probe; do
3583         if has $c; then
3584             shacmd="$c"
3585             break
3586         fi
3587     done
3588     if test "$shacmd" = ""; then
3589         error_exit "one of the checksum commands is required to enable modules: $shacmd_probe"
3590     fi
3591 fi
3592
3593 ##########################################
3594 # pixman support probe
3595
3596 if test "$want_tools" = "no" -a "$softmmu" = "no"; then
3597   pixman_cflags=
3598   pixman_libs=
3599 elif $pkg_config --atleast-version=0.21.8 pixman-1 > /dev/null 2>&1; then
3600   pixman_cflags=$($pkg_config --cflags pixman-1)
3601   pixman_libs=$($pkg_config --libs pixman-1)
3602 else
3603   error_exit "pixman >= 0.21.8 not present." \
3604       "Please install the pixman devel package."
3605 fi
3606
3607 ##########################################
3608 # libmpathpersist probe
3609
3610 if test "$mpath" != "no" ; then
3611   # probe for the new API
3612   cat > $TMPC <<EOF
3613 #include <libudev.h>
3614 #include <mpath_persist.h>
3615 unsigned mpath_mx_alloc_len = 1024;
3616 int logsink;
3617 static struct config *multipath_conf;
3618 extern struct udev *udev;
3619 extern struct config *get_multipath_config(void);
3620 extern void put_multipath_config(struct config *conf);
3621 struct udev *udev;
3622 struct config *get_multipath_config(void) { return multipath_conf; }
3623 void put_multipath_config(struct config *conf) { }
3624
3625 int main(void) {
3626     udev = udev_new();
3627     multipath_conf = mpath_lib_init();
3628     return 0;
3629 }
3630 EOF
3631   if compile_prog "" "-ludev -lmultipath -lmpathpersist" ; then
3632     mpathpersist=yes
3633     mpathpersist_new_api=yes
3634   else
3635     # probe for the old API
3636     cat > $TMPC <<EOF
3637 #include <libudev.h>
3638 #include <mpath_persist.h>
3639 unsigned mpath_mx_alloc_len = 1024;
3640 int logsink;
3641 int main(void) {
3642     struct udev *udev = udev_new();
3643     mpath_lib_init(udev);
3644     return 0;
3645 }
3646 EOF
3647     if compile_prog "" "-ludev -lmultipath -lmpathpersist" ; then
3648       mpathpersist=yes
3649       mpathpersist_new_api=no
3650     else
3651       mpathpersist=no
3652     fi
3653   fi
3654 else
3655   mpathpersist=no
3656 fi
3657
3658 ##########################################
3659 # libcap probe
3660
3661 if test "$cap" != "no" ; then
3662   cat > $TMPC <<EOF
3663 #include <stdio.h>
3664 #include <sys/capability.h>
3665 int main(void) { cap_t caps; caps = cap_init(); return caps != NULL; }
3666 EOF
3667   if compile_prog "" "-lcap" ; then
3668     cap=yes
3669   else
3670     cap=no
3671   fi
3672 fi
3673
3674 ##########################################
3675 # pthread probe
3676 PTHREADLIBS_LIST="-pthread -lpthread -lpthreadGC2"
3677
3678 pthread=no
3679 cat > $TMPC << EOF
3680 #include <pthread.h>
3681 static void *f(void *p) { return NULL; }
3682 int main(void) {
3683   pthread_t thread;
3684   pthread_create(&thread, 0, f, 0);
3685   return 0;
3686 }
3687 EOF
3688 if compile_prog "" "" ; then
3689   pthread=yes
3690 else
3691   for pthread_lib in $PTHREADLIBS_LIST; do
3692     if compile_prog "" "$pthread_lib" ; then
3693       pthread=yes
3694       found=no
3695       for lib_entry in $LIBS; do
3696         if test "$lib_entry" = "$pthread_lib"; then
3697           found=yes
3698           break
3699         fi
3700       done
3701       if test "$found" = "no"; then
3702         LIBS="$pthread_lib $LIBS"
3703         libs_qga="$pthread_lib $libs_qga"
3704       fi
3705       PTHREAD_LIB="$pthread_lib"
3706       break
3707     fi
3708   done
3709 fi
3710
3711 if test "$mingw32" != yes -a "$pthread" = no; then
3712   error_exit "pthread check failed" \
3713       "Make sure to have the pthread libs and headers installed."
3714 fi
3715
3716 # check for pthread_setname_np
3717 pthread_setname_np=no
3718 cat > $TMPC << EOF
3719 #include <pthread.h>
3720
3721 static void *f(void *p) { return NULL; }
3722 int main(void)
3723 {
3724     pthread_t thread;
3725     pthread_create(&thread, 0, f, 0);
3726     pthread_setname_np(thread, "QEMU");
3727     return 0;
3728 }
3729 EOF
3730 if compile_prog "" "$pthread_lib" ; then
3731   pthread_setname_np=yes
3732 fi
3733
3734 ##########################################
3735 # rbd probe
3736 if test "$rbd" != "no" ; then
3737   cat > $TMPC <<EOF
3738 #include <stdio.h>
3739 #include <rbd/librbd.h>
3740 int main(void) {
3741     rados_t cluster;
3742     rados_create(&cluster, NULL);
3743     return 0;
3744 }
3745 EOF
3746   rbd_libs="-lrbd -lrados"
3747   if compile_prog "" "$rbd_libs" ; then
3748     rbd=yes
3749   else
3750     if test "$rbd" = "yes" ; then
3751       feature_not_found "rados block device" "Install librbd/ceph devel"
3752     fi
3753     rbd=no
3754   fi
3755 fi
3756
3757 ##########################################
3758 # libssh2 probe
3759 min_libssh2_version=1.2.8
3760 if test "$libssh2" != "no" ; then
3761   if $pkg_config --atleast-version=$min_libssh2_version libssh2; then
3762     libssh2_cflags=$($pkg_config libssh2 --cflags)
3763     libssh2_libs=$($pkg_config libssh2 --libs)
3764     libssh2=yes
3765   else
3766     if test "$libssh2" = "yes" ; then
3767       error_exit "libssh2 >= $min_libssh2_version required for --enable-libssh2"
3768     fi
3769     libssh2=no
3770   fi
3771 fi
3772
3773 ##########################################
3774 # libssh2_sftp_fsync probe
3775
3776 if test "$libssh2" = "yes"; then
3777   cat > $TMPC <<EOF
3778 #include <stdio.h>
3779 #include <libssh2.h>
3780 #include <libssh2_sftp.h>
3781 int main(void) {
3782     LIBSSH2_SESSION *session;
3783     LIBSSH2_SFTP *sftp;
3784     LIBSSH2_SFTP_HANDLE *sftp_handle;
3785     session = libssh2_session_init ();
3786     sftp = libssh2_sftp_init (session);
3787     sftp_handle = libssh2_sftp_open (sftp, "/", 0, 0);
3788     libssh2_sftp_fsync (sftp_handle);
3789     return 0;
3790 }
3791 EOF
3792   # libssh2_cflags/libssh2_libs defined in previous test.
3793   if compile_prog "$libssh2_cflags" "$libssh2_libs" ; then
3794     QEMU_CFLAGS="-DHAS_LIBSSH2_SFTP_FSYNC $QEMU_CFLAGS"
3795   fi
3796 fi
3797
3798 ##########################################
3799 # linux-aio probe
3800
3801 if test "$linux_aio" != "no" ; then
3802   cat > $TMPC <<EOF
3803 #include <libaio.h>
3804 #include <sys/eventfd.h>
3805 #include <stddef.h>
3806 int main(void) { io_setup(0, NULL); io_set_eventfd(NULL, 0); eventfd(0, 0); return 0; }
3807 EOF
3808   if compile_prog "" "-laio" ; then
3809     linux_aio=yes
3810   else
3811     if test "$linux_aio" = "yes" ; then
3812       feature_not_found "linux AIO" "Install libaio devel"
3813     fi
3814     linux_aio=no
3815   fi
3816 fi
3817
3818 ##########################################
3819 # TPM passthrough is only on x86 Linux
3820
3821 if test "$targetos" = Linux && test "$cpu" = i386 -o "$cpu" = x86_64; then
3822   tpm_passthrough=$tpm
3823 else
3824   tpm_passthrough=no
3825 fi
3826
3827 # TPM emulator is for all posix systems
3828 if test "$mingw32" != "yes"; then
3829   tpm_emulator=$tpm
3830 else
3831   tpm_emulator=no
3832 fi
3833 ##########################################
3834 # attr probe
3835
3836 if test "$attr" != "no" ; then
3837   cat > $TMPC <<EOF
3838 #include <stdio.h>
3839 #include <sys/types.h>
3840 #ifdef CONFIG_LIBATTR
3841 #include <attr/xattr.h>
3842 #else
3843 #include <sys/xattr.h>
3844 #endif
3845 int main(void) { getxattr(NULL, NULL, NULL, 0); setxattr(NULL, NULL, NULL, 0, 0); return 0; }
3846 EOF
3847   if compile_prog "" "" ; then
3848     attr=yes
3849   # Older distros have <attr/xattr.h>, and need -lattr:
3850   elif compile_prog "-DCONFIG_LIBATTR" "-lattr" ; then
3851     attr=yes
3852     LIBS="-lattr $LIBS"
3853     libattr=yes
3854   else
3855     if test "$attr" = "yes" ; then
3856       feature_not_found "ATTR" "Install libc6 or libattr devel"
3857     fi
3858     attr=no
3859   fi
3860 fi
3861
3862 ##########################################
3863 # iovec probe
3864 cat > $TMPC <<EOF
3865 #include <sys/types.h>
3866 #include <sys/uio.h>
3867 #include <unistd.h>
3868 int main(void) { return sizeof(struct iovec); }
3869 EOF
3870 iovec=no
3871 if compile_prog "" "" ; then
3872   iovec=yes
3873 fi
3874
3875 ##########################################
3876 # preadv probe
3877 cat > $TMPC <<EOF
3878 #include <sys/types.h>
3879 #include <sys/uio.h>
3880 #include <unistd.h>
3881 int main(void) { return preadv(0, 0, 0, 0); }
3882 EOF
3883 preadv=no
3884 if compile_prog "" "" ; then
3885   preadv=yes
3886 fi
3887
3888 ##########################################
3889 # fdt probe
3890 # fdt support is mandatory for at least some target architectures,
3891 # so insist on it if we're building those system emulators.
3892 fdt_required=no
3893 for target in $target_list; do
3894   case $target in
3895     aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu|mips64el-softmmu|riscv*-softmmu)
3896       fdt_required=yes
3897     ;;
3898   esac
3899 done
3900
3901 if test "$fdt_required" = "yes"; then
3902   if test "$fdt" = "no"; then
3903     error_exit "fdt disabled but some requested targets require it." \
3904       "You can turn off fdt only if you also disable all the system emulation" \
3905       "targets which need it (by specifying a cut down --target-list)."
3906   fi
3907   fdt=yes
3908 fi
3909
3910 if test "$fdt" != "no" ; then
3911   fdt_libs="-lfdt"
3912   # explicitly check for libfdt_env.h as it is missing in some stable installs
3913   # and test for required functions to make sure we are on a version >= 1.4.2
3914   cat > $TMPC << EOF
3915 #include <libfdt.h>
3916 #include <libfdt_env.h>
3917 int main(void) { fdt_first_subnode(0, 0); return 0; }
3918 EOF
3919   if compile_prog "" "$fdt_libs" ; then
3920     # system DTC is good - use it
3921     fdt=system
3922   else
3923       # have GIT checkout, so activate dtc submodule
3924       if test -e "${source_path}/.git" ; then
3925           git_submodules="${git_submodules} dtc"
3926       fi
3927       if test -d "${source_path}/dtc/libfdt" || test -e "${source_path}/.git" ; then
3928           fdt=git
3929           mkdir -p dtc
3930           if [ "$pwd_is_source_path" != "y" ] ; then
3931               symlink "$source_path/dtc/Makefile" "dtc/Makefile"
3932               symlink "$source_path/dtc/scripts" "dtc/scripts"
3933           fi
3934           fdt_cflags="-I\$(SRC_PATH)/dtc/libfdt"
3935           fdt_ldflags="-L\$(BUILD_DIR)/dtc/libfdt"
3936           fdt_libs="$fdt_libs"
3937       elif test "$fdt" = "yes" ; then
3938           # Not a git build & no libfdt found, prompt for system install
3939           error_exit "DTC (libfdt) version >= 1.4.2 not present." \
3940                      "Please install the DTC (libfdt) devel package"
3941       else
3942           # don't have and don't want
3943           fdt_libs=
3944           fdt=no
3945       fi
3946   fi
3947 fi
3948
3949 libs_softmmu="$libs_softmmu $fdt_libs"
3950
3951 ##########################################
3952 # opengl probe (for sdl2, gtk, milkymist-tmu2)
3953
3954 if test "$opengl" != "no" ; then
3955   opengl_pkgs="epoxy gbm"
3956   if $pkg_config $opengl_pkgs; then
3957     opengl_cflags="$($pkg_config --cflags $opengl_pkgs)"
3958     opengl_libs="$($pkg_config --libs $opengl_pkgs)"
3959     opengl=yes
3960     if test "$gtk" = "yes" && $pkg_config --exists "$gtkpackage >= 3.16"; then
3961         gtk_gl="yes"
3962     fi
3963     QEMU_CFLAGS="$QEMU_CFLAGS $opengl_cflags"
3964   else
3965     if test "$opengl" = "yes" ; then
3966       feature_not_found "opengl" "Please install opengl (mesa) devel pkgs: $opengl_pkgs"
3967     fi
3968     opengl_cflags=""
3969     opengl_libs=""
3970     opengl=no
3971   fi
3972 fi
3973
3974 if test "$opengl" = "yes"; then
3975   cat > $TMPC << EOF
3976 #include <epoxy/egl.h>
3977 #ifndef EGL_MESA_image_dma_buf_export
3978 # error mesa/epoxy lacks support for dmabufs (mesa 10.6+)
3979 #endif
3980 int main(void) { return 0; }
3981 EOF
3982   if compile_prog "" "" ; then
3983     opengl_dmabuf=yes
3984   fi
3985 fi
3986
3987 ##########################################
3988 # libxml2 probe
3989 if test "$libxml2" != "no" ; then
3990     if $pkg_config --exists libxml-2.0; then
3991         libxml2="yes"
3992         libxml2_cflags=$($pkg_config --cflags libxml-2.0)
3993         libxml2_libs=$($pkg_config --libs libxml-2.0)
3994     else
3995         if test "$libxml2" = "yes"; then
3996             feature_not_found "libxml2" "Install libxml2 devel"
3997         fi
3998         libxml2="no"
3999     fi
4000 fi
4001
4002 ##########################################
4003 # glusterfs probe
4004 if test "$glusterfs" != "no" ; then
4005   if $pkg_config --atleast-version=3 glusterfs-api; then
4006     glusterfs="yes"
4007     glusterfs_cflags=$($pkg_config --cflags glusterfs-api)
4008     glusterfs_libs=$($pkg_config --libs glusterfs-api)
4009     if $pkg_config --atleast-version=4 glusterfs-api; then
4010       glusterfs_xlator_opt="yes"
4011     fi
4012     if $pkg_config --atleast-version=5 glusterfs-api; then
4013       glusterfs_discard="yes"
4014     fi
4015     if $pkg_config --atleast-version=6 glusterfs-api; then
4016       glusterfs_fallocate="yes"
4017       glusterfs_zerofill="yes"
4018     fi
4019   else
4020     if test "$glusterfs" = "yes" ; then
4021       feature_not_found "GlusterFS backend support" \
4022           "Install glusterfs-api devel >= 3"
4023     fi
4024     glusterfs="no"
4025   fi
4026 fi
4027
4028 # Check for inotify functions when we are building linux-user
4029 # emulator.  This is done because older glibc versions don't
4030 # have syscall stubs for these implemented.  In that case we
4031 # don't provide them even if kernel supports them.
4032 #
4033 inotify=no
4034 cat > $TMPC << EOF
4035 #include <sys/inotify.h>
4036
4037 int
4038 main(void)
4039 {
4040         /* try to start inotify */
4041         return inotify_init();
4042 }
4043 EOF
4044 if compile_prog "" "" ; then
4045   inotify=yes
4046 fi
4047
4048 inotify1=no
4049 cat > $TMPC << EOF
4050 #include <sys/inotify.h>
4051
4052 int
4053 main(void)
4054 {
4055     /* try to start inotify */
4056     return inotify_init1(0);
4057 }
4058 EOF
4059 if compile_prog "" "" ; then
4060   inotify1=yes
4061 fi
4062
4063 # check if pipe2 is there
4064 pipe2=no
4065 cat > $TMPC << EOF
4066 #include <unistd.h>
4067 #include <fcntl.h>
4068
4069 int main(void)
4070 {
4071     int pipefd[2];
4072     return pipe2(pipefd, O_CLOEXEC);
4073 }
4074 EOF
4075 if compile_prog "" "" ; then
4076   pipe2=yes
4077 fi
4078
4079 # check if accept4 is there
4080 accept4=no
4081 cat > $TMPC << EOF
4082 #include <sys/socket.h>
4083 #include <stddef.h>
4084
4085 int main(void)
4086 {
4087     accept4(0, NULL, NULL, SOCK_CLOEXEC);
4088     return 0;
4089 }
4090 EOF
4091 if compile_prog "" "" ; then
4092   accept4=yes
4093 fi
4094
4095 # check if tee/splice is there. vmsplice was added same time.
4096 splice=no
4097 cat > $TMPC << EOF
4098 #include <unistd.h>
4099 #include <fcntl.h>
4100 #include <limits.h>
4101
4102 int main(void)
4103 {
4104     int len, fd = 0;
4105     len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK);
4106     splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE);
4107     return 0;
4108 }
4109 EOF
4110 if compile_prog "" "" ; then
4111   splice=yes
4112 fi
4113
4114 ##########################################
4115 # libnuma probe
4116
4117 if test "$numa" != "no" ; then
4118   cat > $TMPC << EOF
4119 #include <numa.h>
4120 int main(void) { return numa_available(); }
4121 EOF
4122
4123   if compile_prog "" "-lnuma" ; then
4124     numa=yes
4125     libs_softmmu="-lnuma $libs_softmmu"
4126   else
4127     if test "$numa" = "yes" ; then
4128       feature_not_found "numa" "install numactl devel"
4129     fi
4130     numa=no
4131   fi
4132 fi
4133
4134 if test "$tcmalloc" = "yes" && test "$jemalloc" = "yes" ; then
4135     echo "ERROR: tcmalloc && jemalloc can't be used at the same time"
4136     exit 1
4137 fi
4138
4139 # Even if malloc_trim() is available, these non-libc memory allocators
4140 # do not support it.
4141 if test "$tcmalloc" = "yes" || test "$jemalloc" = "yes" ; then
4142     if test "$malloc_trim" = "yes" ; then
4143         echo "Disabling malloc_trim with non-libc memory allocator"
4144     fi
4145     malloc_trim="no"
4146 fi
4147
4148 #######################################
4149 # malloc_trim
4150
4151 if test "$malloc_trim" != "no" ; then
4152     cat > $TMPC << EOF
4153 #include <malloc.h>
4154 int main(void) { malloc_trim(0); return 0; }
4155 EOF
4156     if compile_prog "" "" ; then
4157         malloc_trim="yes"
4158     else
4159         malloc_trim="no"
4160     fi
4161 fi
4162
4163 ##########################################
4164 # tcmalloc probe
4165
4166 if test "$tcmalloc" = "yes" ; then
4167   cat > $TMPC << EOF
4168 #include <stdlib.h>
4169 int main(void) { malloc(1); return 0; }
4170 EOF
4171
4172   if compile_prog "" "-ltcmalloc" ; then
4173     LIBS="-ltcmalloc $LIBS"
4174   else
4175     feature_not_found "tcmalloc" "install gperftools devel"
4176   fi
4177 fi
4178
4179 ##########################################
4180 # jemalloc probe
4181
4182 if test "$jemalloc" = "yes" ; then
4183   cat > $TMPC << EOF
4184 #include <stdlib.h>
4185 int main(void) { malloc(1); return 0; }
4186 EOF
4187
4188   if compile_prog "" "-ljemalloc" ; then
4189     LIBS="-ljemalloc $LIBS"
4190   else
4191     feature_not_found "jemalloc" "install jemalloc devel"
4192   fi
4193 fi
4194
4195 ##########################################
4196 # signalfd probe
4197 signalfd="no"
4198 cat > $TMPC << EOF
4199 #include <unistd.h>
4200 #include <sys/syscall.h>
4201 #include <signal.h>
4202 int main(void) { return syscall(SYS_signalfd, -1, NULL, _NSIG / 8); }
4203 EOF
4204
4205 if compile_prog "" "" ; then
4206   signalfd=yes
4207 fi
4208
4209 # check if eventfd is supported
4210 eventfd=no
4211 cat > $TMPC << EOF
4212 #include <sys/eventfd.h>
4213
4214 int main(void)
4215 {
4216     return eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
4217 }
4218 EOF
4219 if compile_prog "" "" ; then
4220   eventfd=yes
4221 fi
4222
4223 # check if memfd is supported
4224 memfd=no
4225 cat > $TMPC << EOF
4226 #include <sys/mman.h>
4227
4228 int main(void)
4229 {
4230     return memfd_create("foo", MFD_ALLOW_SEALING);
4231 }
4232 EOF
4233 if compile_prog "" "" ; then
4234   memfd=yes
4235 fi
4236
4237
4238
4239 # check for fallocate
4240 fallocate=no
4241 cat > $TMPC << EOF
4242 #include <fcntl.h>
4243
4244 int main(void)
4245 {
4246     fallocate(0, 0, 0, 0);
4247     return 0;
4248 }
4249 EOF
4250 if compile_prog "" "" ; then
4251   fallocate=yes
4252 fi
4253
4254 # check for fallocate hole punching
4255 fallocate_punch_hole=no
4256 cat > $TMPC << EOF
4257 #include <fcntl.h>
4258 #include <linux/falloc.h>
4259
4260 int main(void)
4261 {
4262     fallocate(0, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 0, 0);
4263     return 0;
4264 }
4265 EOF
4266 if compile_prog "" "" ; then
4267   fallocate_punch_hole=yes
4268 fi
4269
4270 # check that fallocate supports range zeroing inside the file
4271 fallocate_zero_range=no
4272 cat > $TMPC << EOF
4273 #include <fcntl.h>
4274 #include <linux/falloc.h>
4275
4276 int main(void)
4277 {
4278     fallocate(0, FALLOC_FL_ZERO_RANGE, 0, 0);
4279     return 0;
4280 }
4281 EOF
4282 if compile_prog "" "" ; then
4283   fallocate_zero_range=yes
4284 fi
4285
4286 # check for posix_fallocate
4287 posix_fallocate=no
4288 cat > $TMPC << EOF
4289 #include <fcntl.h>
4290
4291 int main(void)
4292 {
4293     posix_fallocate(0, 0, 0);
4294     return 0;
4295 }
4296 EOF
4297 if compile_prog "" "" ; then
4298     posix_fallocate=yes
4299 fi
4300
4301 # check for sync_file_range
4302 sync_file_range=no
4303 cat > $TMPC << EOF
4304 #include <fcntl.h>
4305
4306 int main(void)
4307 {
4308     sync_file_range(0, 0, 0, 0);
4309     return 0;
4310 }
4311 EOF
4312 if compile_prog "" "" ; then
4313   sync_file_range=yes
4314 fi
4315
4316 # check for linux/fiemap.h and FS_IOC_FIEMAP
4317 fiemap=no
4318 cat > $TMPC << EOF
4319 #include <sys/ioctl.h>
4320 #include <linux/fs.h>
4321 #include <linux/fiemap.h>
4322
4323 int main(void)
4324 {
4325     ioctl(0, FS_IOC_FIEMAP, 0);
4326     return 0;
4327 }
4328 EOF
4329 if compile_prog "" "" ; then
4330   fiemap=yes
4331 fi
4332
4333 # check for dup3
4334 dup3=no
4335 cat > $TMPC << EOF
4336 #include <unistd.h>
4337
4338 int main(void)
4339 {
4340     dup3(0, 0, 0);
4341     return 0;
4342 }
4343 EOF
4344 if compile_prog "" "" ; then
4345   dup3=yes
4346 fi
4347
4348 # check for ppoll support
4349 ppoll=no
4350 cat > $TMPC << EOF
4351 #include <poll.h>
4352
4353 int main(void)
4354 {
4355     struct pollfd pfd = { .fd = 0, .events = 0, .revents = 0 };
4356     ppoll(&pfd, 1, 0, 0);
4357     return 0;
4358 }
4359 EOF
4360 if compile_prog "" "" ; then
4361   ppoll=yes
4362 fi
4363
4364 # check for prctl(PR_SET_TIMERSLACK , ... ) support
4365 prctl_pr_set_timerslack=no
4366 cat > $TMPC << EOF
4367 #include <sys/prctl.h>
4368
4369 int main(void)
4370 {
4371     prctl(PR_SET_TIMERSLACK, 1, 0, 0, 0);
4372     return 0;
4373 }
4374 EOF
4375 if compile_prog "" "" ; then
4376   prctl_pr_set_timerslack=yes
4377 fi
4378
4379 # check for epoll support
4380 epoll=no
4381 cat > $TMPC << EOF
4382 #include <sys/epoll.h>
4383
4384 int main(void)
4385 {
4386     epoll_create(0);
4387     return 0;
4388 }
4389 EOF
4390 if compile_prog "" "" ; then
4391   epoll=yes
4392 fi
4393
4394 # epoll_create1 is a later addition
4395 # so we must check separately for its presence
4396 epoll_create1=no
4397 cat > $TMPC << EOF
4398 #include <sys/epoll.h>
4399
4400 int main(void)
4401 {
4402     /* Note that we use epoll_create1 as a value, not as
4403      * a function being called. This is necessary so that on
4404      * old SPARC glibc versions where the function was present in
4405      * the library but not declared in the header file we will
4406      * fail the configure check. (Otherwise we will get a compiler
4407      * warning but not an error, and will proceed to fail the
4408      * qemu compile where we compile with -Werror.)
4409      */
4410     return (int)(uintptr_t)&epoll_create1;
4411 }
4412 EOF
4413 if compile_prog "" "" ; then
4414   epoll_create1=yes
4415 fi
4416
4417 # check for sendfile support
4418 sendfile=no
4419 cat > $TMPC << EOF
4420 #include <sys/sendfile.h>
4421
4422 int main(void)
4423 {
4424     return sendfile(0, 0, 0, 0);
4425 }
4426 EOF
4427 if compile_prog "" "" ; then
4428   sendfile=yes
4429 fi
4430
4431 # check for timerfd support (glibc 2.8 and newer)
4432 timerfd=no
4433 cat > $TMPC << EOF
4434 #include <sys/timerfd.h>
4435
4436 int main(void)
4437 {
4438     return(timerfd_create(CLOCK_REALTIME, 0));
4439 }
4440 EOF
4441 if compile_prog "" "" ; then
4442   timerfd=yes
4443 fi
4444
4445 # check for setns and unshare support
4446 setns=no
4447 cat > $TMPC << EOF
4448 #include <sched.h>
4449
4450 int main(void)
4451 {
4452     int ret;
4453     ret = setns(0, 0);
4454     ret = unshare(0);
4455     return ret;
4456 }
4457 EOF
4458 if compile_prog "" "" ; then
4459   setns=yes
4460 fi
4461
4462 # clock_adjtime probe
4463 clock_adjtime=no
4464 cat > $TMPC <<EOF
4465 #include <time.h>
4466
4467 int main(void)
4468 {
4469     return clock_adjtime(0, 0);
4470 }
4471 EOF
4472 clock_adjtime=no
4473 if compile_prog "" "" ; then
4474   clock_adjtime=yes
4475 fi
4476
4477 # syncfs probe
4478 syncfs=no
4479 cat > $TMPC <<EOF
4480 #include <unistd.h>
4481
4482 int main(void)
4483 {
4484     return syncfs(0);
4485 }
4486 EOF
4487 syncfs=no
4488 if compile_prog "" "" ; then
4489   syncfs=yes
4490 fi
4491
4492 # Check if tools are available to build documentation.
4493 if test "$docs" != "no" ; then
4494   if has makeinfo && has pod2man; then
4495     docs=yes
4496   else
4497     if test "$docs" = "yes" ; then
4498       feature_not_found "docs" "Install texinfo and Perl/perl-podlators"
4499     fi
4500     docs=no
4501   fi
4502 fi
4503
4504 # Search for bswap_32 function
4505 byteswap_h=no
4506 cat > $TMPC << EOF
4507 #include <byteswap.h>
4508 int main(void) { return bswap_32(0); }
4509 EOF
4510 if compile_prog "" "" ; then
4511   byteswap_h=yes
4512 fi
4513
4514 # Search for bswap32 function
4515 bswap_h=no
4516 cat > $TMPC << EOF
4517 #include <sys/endian.h>
4518 #include <sys/types.h>
4519 #include <machine/bswap.h>
4520 int main(void) { return bswap32(0); }
4521 EOF
4522 if compile_prog "" "" ; then
4523   bswap_h=yes
4524 fi
4525
4526 ##########################################
4527 # Do we have libiscsi >= 1.9.0
4528 if test "$libiscsi" != "no" ; then
4529   if $pkg_config --atleast-version=1.9.0 libiscsi; then
4530     libiscsi="yes"
4531     libiscsi_cflags=$($pkg_config --cflags libiscsi)
4532     libiscsi_libs=$($pkg_config --libs libiscsi)
4533   else
4534     if test "$libiscsi" = "yes" ; then
4535       feature_not_found "libiscsi" "Install libiscsi >= 1.9.0"
4536     fi
4537     libiscsi="no"
4538   fi
4539 fi
4540
4541 ##########################################
4542 # Do we need libm
4543 cat > $TMPC << EOF
4544 #include <math.h>
4545 int main(int argc, char **argv) { return isnan(sin((double)argc)); }
4546 EOF
4547 if compile_prog "" "" ; then
4548   :
4549 elif compile_prog "" "-lm" ; then
4550   LIBS="-lm $LIBS"
4551   libs_qga="-lm $libs_qga"
4552 else
4553   error_exit "libm check failed"
4554 fi
4555
4556 ##########################################
4557 # Do we need librt
4558 # uClibc provides 2 versions of clock_gettime(), one with realtime
4559 # support and one without. This means that the clock_gettime() don't
4560 # need -lrt. We still need it for timer_create() so we check for this
4561 # function in addition.
4562 cat > $TMPC <<EOF
4563 #include <signal.h>
4564 #include <time.h>
4565 int main(void) {
4566   timer_create(CLOCK_REALTIME, NULL, NULL);
4567   return clock_gettime(CLOCK_REALTIME, NULL);
4568 }
4569 EOF
4570
4571 if compile_prog "" "" ; then
4572   :
4573 # we need pthread for static linking. use previous pthread test result
4574 elif compile_prog "" "$pthread_lib -lrt" ; then
4575   LIBS="$LIBS -lrt"
4576   libs_qga="$libs_qga -lrt"
4577 fi
4578
4579 if test "$darwin" != "yes" -a "$mingw32" != "yes" -a "$solaris" != yes -a \
4580         "$haiku" != "yes" ; then
4581     libs_softmmu="-lutil $libs_softmmu"
4582 fi
4583
4584 ##########################################
4585 # spice probe
4586 if test "$spice" != "no" ; then
4587   cat > $TMPC << EOF
4588 #include <spice.h>
4589 int main(void) { spice_server_new(); return 0; }
4590 EOF
4591   spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null)
4592   spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null)
4593   if $pkg_config --atleast-version=0.12.0 spice-server && \
4594      $pkg_config --atleast-version=0.12.3 spice-protocol && \
4595      compile_prog "$spice_cflags" "$spice_libs" ; then
4596     spice="yes"
4597     libs_softmmu="$libs_softmmu $spice_libs"
4598     QEMU_CFLAGS="$QEMU_CFLAGS $spice_cflags"
4599     spice_protocol_version=$($pkg_config --modversion spice-protocol)
4600     spice_server_version=$($pkg_config --modversion spice-server)
4601   else
4602     if test "$spice" = "yes" ; then
4603       feature_not_found "spice" \
4604           "Install spice-server(>=0.12.0) and spice-protocol(>=0.12.3) devel"
4605     fi
4606     spice="no"
4607   fi
4608 fi
4609
4610 # check for smartcard support
4611 if test "$smartcard" != "no"; then
4612     if $pkg_config --atleast-version=2.5.1 libcacard; then
4613         libcacard_cflags=$($pkg_config --cflags libcacard)
4614         libcacard_libs=$($pkg_config --libs libcacard)
4615         smartcard="yes"
4616     else
4617         if test "$smartcard" = "yes"; then
4618             feature_not_found "smartcard" "Install libcacard devel"
4619         fi
4620         smartcard="no"
4621     fi
4622 fi
4623
4624 # check for libusb
4625 if test "$libusb" != "no" ; then
4626     if $pkg_config --atleast-version=1.0.13 libusb-1.0; then
4627         libusb="yes"
4628         libusb_cflags=$($pkg_config --cflags libusb-1.0)
4629         libusb_libs=$($pkg_config --libs libusb-1.0)
4630     else
4631         if test "$libusb" = "yes"; then
4632             feature_not_found "libusb" "Install libusb devel >= 1.0.13"
4633         fi
4634         libusb="no"
4635     fi
4636 fi
4637
4638 # check for usbredirparser for usb network redirection support
4639 if test "$usb_redir" != "no" ; then
4640     if $pkg_config --atleast-version=0.6 libusbredirparser-0.5; then
4641         usb_redir="yes"
4642         usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5)
4643         usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5)
4644     else
4645         if test "$usb_redir" = "yes"; then
4646             feature_not_found "usb-redir" "Install usbredir devel"
4647         fi
4648         usb_redir="no"
4649     fi
4650 fi
4651
4652 ##########################################
4653 # check if we have VSS SDK headers for win
4654
4655 if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$vss_win32_sdk" != "no" ; then
4656   case "$vss_win32_sdk" in
4657     "")   vss_win32_include="-isystem $source_path" ;;
4658     *\ *) # The SDK is installed in "Program Files" by default, but we cannot
4659           # handle path with spaces. So we symlink the headers into ".sdk/vss".
4660           vss_win32_include="-isystem $source_path/.sdk/vss"
4661           symlink "$vss_win32_sdk/inc" "$source_path/.sdk/vss/inc"
4662           ;;
4663     *)    vss_win32_include="-isystem $vss_win32_sdk"
4664   esac
4665   cat > $TMPC << EOF
4666 #define __MIDL_user_allocate_free_DEFINED__
4667 #include <inc/win2003/vss.h>
4668 int main(void) { return VSS_CTX_BACKUP; }
4669 EOF
4670   if compile_prog "$vss_win32_include" "" ; then
4671     guest_agent_with_vss="yes"
4672     QEMU_CFLAGS="$QEMU_CFLAGS $vss_win32_include"
4673     libs_qga="-lole32 -loleaut32 -lshlwapi -lstdc++ -Wl,--enable-stdcall-fixup $libs_qga"
4674     qga_vss_provider="qga/vss-win32/qga-vss.dll qga/vss-win32/qga-vss.tlb"
4675   else
4676     if test "$vss_win32_sdk" != "" ; then
4677       echo "ERROR: Please download and install Microsoft VSS SDK:"
4678       echo "ERROR:   http://www.microsoft.com/en-us/download/details.aspx?id=23490"
4679       echo "ERROR: On POSIX-systems, you can extract the SDK headers by:"
4680       echo "ERROR:   scripts/extract-vsssdk-headers setup.exe"
4681       echo "ERROR: The headers are extracted in the directory \`inc'."
4682       feature_not_found "VSS support"
4683     fi
4684     guest_agent_with_vss="no"
4685   fi
4686 fi
4687
4688 ##########################################
4689 # lookup Windows platform SDK (if not specified)
4690 # The SDK is needed only to build .tlb (type library) file of guest agent
4691 # VSS provider from the source. It is usually unnecessary because the
4692 # pre-compiled .tlb file is included.
4693
4694 if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$guest_agent_with_vss" = "yes" ; then
4695   if test -z "$win_sdk"; then
4696     programfiles="$PROGRAMFILES"
4697     test -n "$PROGRAMW6432" && programfiles="$PROGRAMW6432"
4698     if test -n "$programfiles"; then
4699       win_sdk=$(ls -d "$programfiles/Microsoft SDKs/Windows/v"* | tail -1) 2>/dev/null
4700     else
4701       feature_not_found "Windows SDK"
4702     fi
4703   elif test "$win_sdk" = "no"; then
4704     win_sdk=""
4705   fi
4706 fi
4707
4708 ##########################################
4709 # check if mingw environment provides a recent ntddscsi.h
4710 if test "$mingw32" = "yes" -a "$guest_agent" != "no"; then
4711   cat > $TMPC << EOF
4712 #include <windows.h>
4713 #include <ntddscsi.h>
4714 int main(void) {
4715 #if !defined(IOCTL_SCSI_GET_ADDRESS)
4716 #error Missing required ioctl definitions
4717 #endif
4718   SCSI_ADDRESS addr = { .Lun = 0, .TargetId = 0, .PathId = 0 };
4719   return addr.Lun;
4720 }
4721 EOF
4722   if compile_prog "" "" ; then
4723     guest_agent_ntddscsi=yes
4724     libs_qga="-lsetupapi $libs_qga"
4725   fi
4726 fi
4727
4728 ##########################################
4729 # virgl renderer probe
4730
4731 if test "$virglrenderer" != "no" ; then
4732   cat > $TMPC << EOF
4733 #include <virglrenderer.h>
4734 int main(void) { virgl_renderer_poll(); return 0; }
4735 EOF
4736   virgl_cflags=$($pkg_config --cflags virglrenderer 2>/dev/null)
4737   virgl_libs=$($pkg_config --libs virglrenderer 2>/dev/null)
4738   virgl_version=$($pkg_config --modversion virglrenderer 2>/dev/null)
4739   if $pkg_config virglrenderer >/dev/null 2>&1 && \
4740      compile_prog "$virgl_cflags" "$virgl_libs" ; then
4741     virglrenderer="yes"
4742   else
4743     if test "$virglrenderer" = "yes" ; then
4744       feature_not_found "virglrenderer"
4745     fi
4746     virglrenderer="no"
4747   fi
4748 fi
4749
4750 ##########################################
4751 # capstone
4752
4753 case "$capstone" in
4754   "" | yes)
4755     if $pkg_config capstone; then
4756       capstone=system
4757     elif test -e "${source_path}/.git" -a $git_update = 'yes' ; then
4758       capstone=git
4759     elif test -e "${source_path}/capstone/Makefile" ; then
4760       capstone=internal
4761     elif test -z "$capstone" ; then
4762       capstone=no
4763     else
4764       feature_not_found "capstone" "Install capstone devel or git submodule"
4765     fi
4766     ;;
4767
4768   system)
4769     if ! $pkg_config capstone; then
4770       feature_not_found "capstone" "Install capstone devel"
4771     fi
4772     ;;
4773 esac
4774
4775 case "$capstone" in
4776   git | internal)
4777     if test "$capstone" = git; then
4778       git_submodules="${git_submodules} capstone"
4779     fi
4780     mkdir -p capstone
4781     QEMU_CFLAGS="$QEMU_CFLAGS -I\$(SRC_PATH)/capstone/include"
4782     if test "$mingw32" = "yes"; then
4783       LIBCAPSTONE=capstone.lib
4784     else
4785       LIBCAPSTONE=libcapstone.a
4786     fi
4787     LIBS="-L\$(BUILD_DIR)/capstone -lcapstone $LIBS"
4788     ;;
4789
4790   system)
4791     QEMU_CFLAGS="$QEMU_CFLAGS $($pkg_config --cflags capstone)"
4792     LIBS="$($pkg_config --libs capstone) $LIBS"
4793     ;;
4794
4795   no)
4796     ;;
4797   *)
4798     error_exit "Unknown state for capstone: $capstone"
4799     ;;
4800 esac
4801
4802 ##########################################
4803 # check if we have fdatasync
4804
4805 fdatasync=no
4806 cat > $TMPC << EOF
4807 #include <unistd.h>
4808 int main(void) {
4809 #if defined(_POSIX_SYNCHRONIZED_IO) && _POSIX_SYNCHRONIZED_IO > 0
4810 return fdatasync(0);
4811 #else
4812 #error Not supported
4813 #endif
4814 }
4815 EOF
4816 if compile_prog "" "" ; then
4817     fdatasync=yes
4818 fi
4819
4820 ##########################################
4821 # check if we have madvise
4822
4823 madvise=no
4824 cat > $TMPC << EOF
4825 #include <sys/types.h>
4826 #include <sys/mman.h>
4827 #include <stddef.h>
4828 int main(void) { return madvise(NULL, 0, MADV_DONTNEED); }
4829 EOF
4830 if compile_prog "" "" ; then
4831     madvise=yes
4832 fi
4833
4834 ##########################################
4835 # check if we have posix_madvise
4836
4837 posix_madvise=no
4838 cat > $TMPC << EOF
4839 #include <sys/mman.h>
4840 #include <stddef.h>
4841 int main(void) { return posix_madvise(NULL, 0, POSIX_MADV_DONTNEED); }
4842 EOF
4843 if compile_prog "" "" ; then
4844     posix_madvise=yes
4845 fi
4846
4847 ##########################################
4848 # check if we have posix_memalign()
4849
4850 posix_memalign=no
4851 cat > $TMPC << EOF
4852 #include <stdlib.h>
4853 int main(void) {
4854     void *p;
4855     return posix_memalign(&p, 8, 8);
4856 }
4857 EOF
4858 if compile_prog "" "" ; then
4859     posix_memalign=yes
4860 fi
4861
4862 ##########################################
4863 # check if we have posix_syslog
4864
4865 posix_syslog=no
4866 cat > $TMPC << EOF
4867 #include <syslog.h>
4868 int main(void) { openlog("qemu", LOG_PID, LOG_DAEMON); syslog(LOG_INFO, "configure"); return 0; }
4869 EOF
4870 if compile_prog "" "" ; then
4871     posix_syslog=yes
4872 fi
4873
4874 ##########################################
4875 # check if we have sem_timedwait
4876
4877 sem_timedwait=no
4878 cat > $TMPC << EOF
4879 #include <semaphore.h>
4880 int main(void) { return sem_timedwait(0, 0); }
4881 EOF
4882 if compile_prog "" "" ; then
4883     sem_timedwait=yes
4884 fi
4885
4886 ##########################################
4887 # check if we have strchrnul
4888
4889 strchrnul=no
4890 cat > $TMPC << EOF
4891 #include <string.h>
4892 int main(void);
4893 // Use a haystack that the compiler shouldn't be able to constant fold
4894 char *haystack = (char*)&main;
4895 int main(void) { return strchrnul(haystack, 'x') != &haystack[6]; }
4896 EOF
4897 if compile_prog "" "" ; then
4898     strchrnul=yes
4899 fi
4900
4901 ##########################################
4902 # check if trace backend exists
4903
4904 $python "$source_path/scripts/tracetool.py" "--backends=$trace_backends" --check-backends  > /dev/null 2> /dev/null
4905 if test "$?" -ne 0 ; then
4906   error_exit "invalid trace backends" \
4907       "Please choose supported trace backends."
4908 fi
4909
4910 ##########################################
4911 # For 'ust' backend, test if ust headers are present
4912 if have_backend "ust"; then
4913   cat > $TMPC << EOF
4914 #include <lttng/tracepoint.h>
4915 int main(void) { return 0; }
4916 EOF
4917   if compile_prog "" "-Wl,--no-as-needed -ldl" ; then
4918     if $pkg_config lttng-ust --exists; then
4919       lttng_ust_libs=$($pkg_config --libs lttng-ust)
4920     else
4921       lttng_ust_libs="-llttng-ust -ldl"
4922     fi
4923     if $pkg_config liburcu-bp --exists; then
4924       urcu_bp_libs=$($pkg_config --libs liburcu-bp)
4925     else
4926       urcu_bp_libs="-lurcu-bp"
4927     fi
4928
4929     LIBS="$lttng_ust_libs $urcu_bp_libs $LIBS"
4930     libs_qga="$lttng_ust_libs $urcu_bp_libs $libs_qga"
4931   else
4932     error_exit "Trace backend 'ust' missing lttng-ust header files"
4933   fi
4934 fi
4935
4936 ##########################################
4937 # For 'dtrace' backend, test if 'dtrace' command is present
4938 if have_backend "dtrace"; then
4939   if ! has 'dtrace' ; then
4940     error_exit "dtrace command is not found in PATH $PATH"
4941   fi
4942   trace_backend_stap="no"
4943   if has 'stap' ; then
4944     trace_backend_stap="yes"
4945   fi
4946 fi
4947
4948 ##########################################
4949 # check and set a backend for coroutine
4950
4951 # We prefer ucontext, but it's not always possible. The fallback
4952 # is sigcontext. On Windows the only valid backend is the Windows
4953 # specific one.
4954
4955 ucontext_works=no
4956 if test "$darwin" != "yes"; then
4957   cat > $TMPC << EOF
4958 #include <ucontext.h>
4959 #ifdef __stub_makecontext
4960 #error Ignoring glibc stub makecontext which will always fail
4961 #endif
4962 int main(void) { makecontext(0, 0, 0); return 0; }
4963 EOF
4964   if compile_prog "" "" ; then
4965     ucontext_works=yes
4966   fi
4967 fi
4968
4969 if test "$coroutine" = ""; then
4970   if test "$mingw32" = "yes"; then
4971     coroutine=win32
4972   elif test "$ucontext_works" = "yes"; then
4973     coroutine=ucontext
4974   else
4975     coroutine=sigaltstack
4976   fi
4977 else
4978   case $coroutine in
4979   windows)
4980     if test "$mingw32" != "yes"; then
4981       error_exit "'windows' coroutine backend only valid for Windows"
4982     fi
4983     # Unfortunately the user visible backend name doesn't match the
4984     # coroutine-*.c filename for this case, so we have to adjust it here.
4985     coroutine=win32
4986     ;;
4987   ucontext)
4988     if test "$ucontext_works" != "yes"; then
4989       feature_not_found "ucontext"
4990     fi
4991     ;;
4992   sigaltstack)
4993     if test "$mingw32" = "yes"; then
4994       error_exit "only the 'windows' coroutine backend is valid for Windows"
4995     fi
4996     ;;
4997   *)
4998     error_exit "unknown coroutine backend $coroutine"
4999     ;;
5000   esac
5001 fi
5002
5003 if test "$coroutine_pool" = ""; then
5004   coroutine_pool=yes
5005 fi
5006
5007 if test "$debug_stack_usage" = "yes"; then
5008   if test "$coroutine_pool" = "yes"; then
5009     echo "WARN: disabling coroutine pool for stack usage debugging"
5010     coroutine_pool=no
5011   fi
5012 fi
5013
5014
5015 ##########################################
5016 # check if we have open_by_handle_at
5017
5018 open_by_handle_at=no
5019 cat > $TMPC << EOF
5020 #include <fcntl.h>
5021 #if !defined(AT_EMPTY_PATH)
5022 # error missing definition
5023 #else
5024 int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); }
5025 #endif
5026 EOF
5027 if compile_prog "" "" ; then
5028     open_by_handle_at=yes
5029 fi
5030
5031 ########################################
5032 # check if we have linux/magic.h
5033
5034 linux_magic_h=no
5035 cat > $TMPC << EOF
5036 #include <linux/magic.h>
5037 int main(void) {
5038   return 0;
5039 }
5040 EOF
5041 if compile_prog "" "" ; then
5042     linux_magic_h=yes
5043 fi
5044
5045 ########################################
5046 # check whether we can disable warning option with a pragma (this is needed
5047 # to silence warnings in the headers of some versions of external libraries).
5048 # This test has to be compiled with -Werror as otherwise an unknown pragma is
5049 # only a warning.
5050 #
5051 # If we can't selectively disable warning in the code, disable -Werror so that
5052 # the build doesn't fail anyway.
5053
5054 pragma_disable_unused_but_set=no
5055 cat > $TMPC << EOF
5056 #pragma GCC diagnostic push
5057 #pragma GCC diagnostic ignored "-Wstrict-prototypes"
5058 #pragma GCC diagnostic pop
5059
5060 int main(void) {
5061     return 0;
5062 }
5063 EOF
5064 if compile_prog "-Werror" "" ; then
5065     pragma_diagnostic_available=yes
5066 else
5067     werror=no
5068 fi
5069
5070 ########################################
5071 # check if we have valgrind/valgrind.h
5072
5073 valgrind_h=no
5074 cat > $TMPC << EOF
5075 #include <valgrind/valgrind.h>
5076 int main(void) {
5077   return 0;
5078 }
5079 EOF
5080 if compile_prog "" "" ; then
5081     valgrind_h=yes
5082 fi
5083
5084 ########################################
5085 # check if environ is declared
5086
5087 has_environ=no
5088 cat > $TMPC << EOF
5089 #include <unistd.h>
5090 int main(void) {
5091     environ = 0;
5092     return 0;
5093 }
5094 EOF
5095 if compile_prog "" "" ; then
5096     has_environ=yes
5097 fi
5098
5099 ########################################
5100 # check if cpuid.h is usable.
5101
5102 cat > $TMPC << EOF
5103 #include <cpuid.h>
5104 int main(void) {
5105     unsigned a, b, c, d;
5106     int max = __get_cpuid_max(0, 0);
5107
5108     if (max >= 1) {
5109         __cpuid(1, a, b, c, d);
5110     }
5111
5112     if (max >= 7) {
5113         __cpuid_count(7, 0, a, b, c, d);
5114     }
5115
5116     return 0;
5117 }
5118 EOF
5119 if compile_prog "" "" ; then
5120     cpuid_h=yes
5121 fi
5122
5123 ##########################################
5124 # avx2 optimization requirement check
5125 #
5126 # There is no point enabling this if cpuid.h is not usable,
5127 # since we won't be able to select the new routines.
5128
5129 if test $cpuid_h = yes; then
5130   cat > $TMPC << EOF
5131 #pragma GCC push_options
5132 #pragma GCC target("avx2")
5133 #include <cpuid.h>
5134 #include <immintrin.h>
5135 static int bar(void *a) {
5136     __m256i x = *(__m256i *)a;
5137     return _mm256_testz_si256(x, x);
5138 }
5139 int main(int argc, char *argv[]) { return bar(argv[0]); }
5140 EOF
5141   if compile_object "" ; then
5142     avx2_opt="yes"
5143   fi
5144 fi
5145
5146 ########################################
5147 # check if __[u]int128_t is usable.
5148
5149 int128=no
5150 cat > $TMPC << EOF
5151 #if defined(__clang_major__) && defined(__clang_minor__)
5152 # if ((__clang_major__ < 3) || (__clang_major__ == 3) && (__clang_minor__ < 2))
5153 #  error __int128_t does not work in CLANG before 3.2
5154 # endif
5155 #endif
5156 __int128_t a;
5157 __uint128_t b;
5158 int main (void) {
5159   a = a + b;
5160   b = a * b;
5161   a = a * a;
5162   return 0;
5163 }
5164 EOF
5165 if compile_prog "" "" ; then
5166     int128=yes
5167 fi
5168
5169 #########################################
5170 # See if 128-bit atomic operations are supported.
5171
5172 atomic128=no
5173 if test "$int128" = "yes"; then
5174   cat > $TMPC << EOF
5175 int main(void)
5176 {
5177   unsigned __int128 x = 0, y = 0;
5178   y = __atomic_load_16(&x, 0);
5179   __atomic_store_16(&x, y, 0);
5180   __atomic_compare_exchange_16(&x, &y, x, 0, 0, 0);
5181   return 0;
5182 }
5183 EOF
5184   if compile_prog "" "" ; then
5185     atomic128=yes
5186   fi
5187 fi
5188
5189 #########################################
5190 # See if 64-bit atomic operations are supported.
5191 # Note that without __atomic builtins, we can only
5192 # assume atomic loads/stores max at pointer size.
5193
5194 cat > $TMPC << EOF
5195 #include <stdint.h>
5196 int main(void)
5197 {
5198   uint64_t x = 0, y = 0;
5199 #ifdef __ATOMIC_RELAXED
5200   y = __atomic_load_8(&x, 0);
5201   __atomic_store_8(&x, y, 0);
5202   __atomic_compare_exchange_8(&x, &y, x, 0, 0, 0);
5203   __atomic_exchange_8(&x, y, 0);
5204   __atomic_fetch_add_8(&x, y, 0);
5205 #else
5206   typedef char is_host64[sizeof(void *) >= sizeof(uint64_t) ? 1 : -1];
5207   __sync_lock_test_and_set(&x, y);
5208   __sync_val_compare_and_swap(&x, y, 0);
5209   __sync_fetch_and_add(&x, y);
5210 #endif
5211   return 0;
5212 }
5213 EOF
5214 if compile_prog "" "" ; then
5215   atomic64=yes
5216 fi
5217
5218 ########################################
5219 # See if 16-byte vector operations are supported.
5220 # Even without a vector unit the compiler may expand these.
5221 # There is a bug in old GCC for PPC that crashes here.
5222 # Unfortunately it's the system compiler for Centos 7.
5223
5224 cat > $TMPC << EOF
5225 typedef unsigned char U1 __attribute__((vector_size(16)));
5226 typedef unsigned short U2 __attribute__((vector_size(16)));
5227 typedef unsigned int U4 __attribute__((vector_size(16)));
5228 typedef unsigned long long U8 __attribute__((vector_size(16)));
5229 typedef signed char S1 __attribute__((vector_size(16)));
5230 typedef signed short S2 __attribute__((vector_size(16)));
5231 typedef signed int S4 __attribute__((vector_size(16)));
5232 typedef signed long long S8 __attribute__((vector_size(16)));
5233 static U1 a1, b1;
5234 static U2 a2, b2;
5235 static U4 a4, b4;
5236 static U8 a8, b8;
5237 static S1 c1;
5238 static S2 c2;
5239 static S4 c4;
5240 static S8 c8;
5241 static int i;
5242 void helper(void *d, void *a, int shift, int i);
5243 void helper(void *d, void *a, int shift, int i)
5244 {
5245   *(U1 *)(d + i) = *(U1 *)(a + i) << shift;
5246   *(U2 *)(d + i) = *(U2 *)(a + i) << shift;
5247   *(U4 *)(d + i) = *(U4 *)(a + i) << shift;
5248   *(U8 *)(d + i) = *(U8 *)(a + i) << shift;
5249 }
5250 int main(void)
5251 {
5252   a1 += b1; a2 += b2; a4 += b4; a8 += b8;
5253   a1 -= b1; a2 -= b2; a4 -= b4; a8 -= b8;
5254   a1 *= b1; a2 *= b2; a4 *= b4; a8 *= b8;
5255   a1 &= b1; a2 &= b2; a4 &= b4; a8 &= b8;
5256   a1 |= b1; a2 |= b2; a4 |= b4; a8 |= b8;
5257   a1 ^= b1; a2 ^= b2; a4 ^= b4; a8 ^= b8;
5258   a1 <<= i; a2 <<= i; a4 <<= i; a8 <<= i;
5259   a1 >>= i; a2 >>= i; a4 >>= i; a8 >>= i;
5260   c1 >>= i; c2 >>= i; c4 >>= i; c8 >>= i;
5261   return 0;
5262 }
5263 EOF
5264
5265 vector16=no
5266 if compile_prog "" "" ; then
5267   vector16=yes
5268 fi
5269
5270 ########################################
5271 # check if getauxval is available.
5272
5273 getauxval=no
5274 cat > $TMPC << EOF
5275 #include <sys/auxv.h>
5276 int main(void) {
5277   return getauxval(AT_HWCAP) == 0;
5278 }
5279 EOF
5280 if compile_prog "" "" ; then
5281     getauxval=yes
5282 fi
5283
5284 ########################################
5285 # check if ccache is interfering with
5286 # semantic analysis of macros
5287
5288 unset CCACHE_CPP2
5289 ccache_cpp2=no
5290 cat > $TMPC << EOF
5291 static const int Z = 1;
5292 #define fn() ({ Z; })
5293 #define TAUT(X) ((X) == Z)
5294 #define PAREN(X, Y) (X == Y)
5295 #define ID(X) (X)
5296 int main(int argc, char *argv[])
5297 {
5298     int x = 0, y = 0;
5299     x = ID(x);
5300     x = fn();
5301     fn();
5302     if (PAREN(x, y)) return 0;
5303     if (TAUT(Z)) return 0;
5304     return 0;
5305 }
5306 EOF
5307
5308 if ! compile_object "-Werror"; then
5309     ccache_cpp2=yes
5310 fi
5311
5312 #################################################
5313 # clang does not support glibc + FORTIFY_SOURCE.
5314
5315 if test "$fortify_source" != "no"; then
5316   if echo | $cc -dM -E - | grep __clang__ > /dev/null 2>&1 ; then
5317     fortify_source="no";
5318   elif test -n "$cxx" && has $cxx &&
5319        echo | $cxx -dM -E - | grep __clang__ >/dev/null 2>&1 ; then
5320     fortify_source="no";
5321   else
5322     fortify_source="yes"
5323   fi
5324 fi
5325
5326 ###############################################
5327 # Check if copy_file_range is provided by glibc
5328 have_copy_file_range=no
5329 cat > $TMPC << EOF
5330 #include <unistd.h>
5331 int main(void) {
5332   copy_file_range(0, NULL, 0, NULL, 0, 0);
5333   return 0;
5334 }
5335 EOF
5336 if compile_prog "" "" ; then
5337     have_copy_file_range=yes
5338 fi
5339
5340 ##########################################
5341 # check if struct fsxattr is available via linux/fs.h
5342
5343 have_fsxattr=no
5344 cat > $TMPC << EOF
5345 #include <linux/fs.h>
5346 struct fsxattr foo;
5347 int main(void) {
5348   return 0;
5349 }
5350 EOF
5351 if compile_prog "" "" ; then
5352     have_fsxattr=yes
5353 fi
5354
5355 ##########################################
5356 # check for usable membarrier system call
5357 if test "$membarrier" = "yes"; then
5358     have_membarrier=no
5359     if test "$mingw32" = "yes" ; then
5360         have_membarrier=yes
5361     elif test "$linux" = "yes" ; then
5362         cat > $TMPC << EOF
5363     #include <linux/membarrier.h>
5364     #include <sys/syscall.h>
5365     #include <unistd.h>
5366     #include <stdlib.h>
5367     int main(void) {
5368         syscall(__NR_membarrier, MEMBARRIER_CMD_QUERY, 0);
5369         syscall(__NR_membarrier, MEMBARRIER_CMD_SHARED, 0);
5370         exit(0);
5371     }
5372 EOF
5373         if compile_prog "" "" ; then
5374             have_membarrier=yes
5375         fi
5376     fi
5377     if test "$have_membarrier" = "no"; then
5378       feature_not_found "membarrier" "membarrier system call not available"
5379     fi
5380 else
5381     # Do not enable it by default even for Mingw32, because it doesn't
5382     # work on Wine.
5383     membarrier=no
5384 fi
5385
5386 ##########################################
5387 # check if rtnetlink.h exists and is useful
5388 have_rtnetlink=no
5389 cat > $TMPC << EOF
5390 #include <linux/rtnetlink.h>
5391 int main(void) {
5392   return IFLA_PROTO_DOWN;
5393 }
5394 EOF
5395 if compile_prog "" "" ; then
5396     have_rtnetlink=yes
5397 fi
5398
5399 ##########################################
5400 # check for usable AF_VSOCK environment
5401 have_af_vsock=no
5402 cat > $TMPC << EOF
5403 #include <errno.h>
5404 #include <sys/types.h>
5405 #include <sys/socket.h>
5406 #if !defined(AF_VSOCK)
5407 # error missing AF_VSOCK flag
5408 #endif
5409 #include <linux/vm_sockets.h>
5410 int main(void) {
5411     int sock, ret;
5412     struct sockaddr_vm svm;
5413     socklen_t len = sizeof(svm);
5414     sock = socket(AF_VSOCK, SOCK_STREAM, 0);
5415     ret = getpeername(sock, (struct sockaddr *)&svm, &len);
5416     if ((ret == -1) && (errno == ENOTCONN)) {
5417         return 0;
5418     }
5419     return -1;
5420 }
5421 EOF
5422 if compile_prog "" "" ; then
5423     have_af_vsock=yes
5424 fi
5425
5426 ##########################################
5427 # check for usable AF_ALG environment
5428 hava_afalg=no
5429 cat > $TMPC << EOF
5430 #include <errno.h>
5431 #include <sys/types.h>
5432 #include <sys/socket.h>
5433 #include <linux/if_alg.h>
5434 int main(void) {
5435     int sock;
5436     sock = socket(AF_ALG, SOCK_SEQPACKET, 0);
5437     return sock;
5438 }
5439 EOF
5440 if compile_prog "" "" ; then
5441     have_afalg=yes
5442 fi
5443 if test "$crypto_afalg" = "yes"
5444 then
5445     if test "$have_afalg" != "yes"
5446     then
5447         error_exit "AF_ALG requested but could not be detected"
5448     fi
5449 fi
5450
5451
5452 #################################################
5453 # Check to see if we have the Hypervisor framework
5454 if [ "$darwin" = "yes" ] ; then
5455   cat > $TMPC << EOF
5456 #include <Hypervisor/hv.h>
5457 int main() { return 0;}
5458 EOF
5459   if ! compile_object ""; then
5460     hvf='no'
5461   else
5462     hvf='yes'
5463     LDFLAGS="-framework Hypervisor $LDFLAGS"
5464   fi
5465 fi
5466
5467 #################################################
5468 # Sparc implicitly links with --relax, which is
5469 # incompatible with -r, so --no-relax should be
5470 # given. It does no harm to give it on other
5471 # platforms too.
5472
5473 # Note: the prototype is needed since QEMU_CFLAGS
5474 #       contains -Wmissing-prototypes
5475 cat > $TMPC << EOF
5476 extern int foo(void);
5477 int foo(void) { return 0; }
5478 EOF
5479 if ! compile_object ""; then
5480   error_exit "Failed to compile object file for LD_REL_FLAGS test"
5481 fi
5482 for i in '-Wl,-r -Wl,--no-relax' -Wl,-r -r; do
5483   if do_cc -nostdlib $i -o $TMPMO $TMPO; then
5484     LD_REL_FLAGS=$i
5485     break
5486   fi
5487 done
5488 if test "$modules" = "yes" && test "$LD_REL_FLAGS" = ""; then
5489   feature_not_found "modules" "Cannot find how to build relocatable objects"
5490 fi
5491
5492 ##########################################
5493 # check for sysmacros.h
5494
5495 have_sysmacros=no
5496 cat > $TMPC << EOF
5497 #include <sys/sysmacros.h>
5498 int main(void) {
5499     return makedev(0, 0);
5500 }
5501 EOF
5502 if compile_prog "" "" ; then
5503     have_sysmacros=yes
5504 fi
5505
5506 ##########################################
5507 # Veritas HyperScale block driver VxHS
5508 # Check if libvxhs is installed
5509
5510 if test "$vxhs" != "no" ; then
5511   cat > $TMPC <<EOF
5512 #include <stdint.h>
5513 #include <qnio/qnio_api.h>
5514
5515 void *vxhs_callback;
5516
5517 int main(void) {
5518     iio_init(QNIO_VERSION, vxhs_callback);
5519     return 0;
5520 }
5521 EOF
5522   vxhs_libs="-lvxhs -lssl"
5523   if compile_prog "" "$vxhs_libs" ; then
5524     vxhs=yes
5525   else
5526     if test "$vxhs" = "yes" ; then
5527       feature_not_found "vxhs block device" "Install libvxhs See github"
5528     fi
5529     vxhs=no
5530   fi
5531 fi
5532
5533 ##########################################
5534 # check for _Static_assert()
5535
5536 have_static_assert=no
5537 cat > $TMPC << EOF
5538 _Static_assert(1, "success");
5539 int main(void) {
5540     return 0;
5541 }
5542 EOF
5543 if compile_prog "" "" ; then
5544     have_static_assert=yes
5545 fi
5546
5547 ##########################################
5548 # check for utmpx.h, it is missing e.g. on OpenBSD
5549
5550 have_utmpx=no
5551 cat > $TMPC << EOF
5552 #include <utmpx.h>
5553 struct utmpx user_info;
5554 int main(void) {
5555     return 0;
5556 }
5557 EOF
5558 if compile_prog "" "" ; then
5559     have_utmpx=yes
5560 fi
5561
5562 ##########################################
5563 # checks for sanitizers
5564
5565 have_asan=no
5566 have_ubsan=no
5567 have_asan_iface_h=no
5568 have_asan_iface_fiber=no
5569
5570 if test "$sanitizers" = "yes" ; then
5571   write_c_skeleton
5572   if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" ""; then
5573       have_asan=yes
5574   fi
5575
5576   # we could use a simple skeleton for flags checks, but this also
5577   # detect the static linking issue of ubsan, see also:
5578   # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84285
5579   cat > $TMPC << EOF
5580 #include <stdlib.h>
5581 int main(void) {
5582     void *tmp = malloc(10);
5583     return *(int *)(tmp + 2);
5584 }
5585 EOF
5586   if compile_prog "$CPU_CFLAGS -Werror -fsanitize=undefined" ""; then
5587       have_ubsan=yes
5588   fi
5589
5590   if check_include "sanitizer/asan_interface.h" ; then
5591       have_asan_iface_h=yes
5592   fi
5593
5594   cat > $TMPC << EOF
5595 #include <sanitizer/asan_interface.h>
5596 int main(void) {
5597   __sanitizer_start_switch_fiber(0, 0, 0);
5598   return 0;
5599 }
5600 EOF
5601   if compile_prog "$CPU_CFLAGS -Werror -fsanitize=address" "" ; then
5602       have_asan_iface_fiber=yes
5603   fi
5604 fi
5605
5606 ##########################################
5607 # Docker and cross-compiler support
5608 #
5609 # This is specifically for building test
5610 # cases for foreign architectures, not
5611 # cross-compiling QEMU itself.
5612
5613 if has "docker"; then
5614     docker=$($python $source_path/tests/docker/docker.py probe)
5615 fi
5616
5617 ##########################################
5618 # check for libpmem
5619
5620 if test "$libpmem" != "no"; then
5621         if $pkg_config --exists "libpmem"; then
5622                 libpmem="yes"
5623                 libpmem_libs=$($pkg_config --libs libpmem)
5624                 libpmem_cflags=$($pkg_config --cflags libpmem)
5625                 libs_softmmu="$libs_softmmu $libpmem_libs"
5626                 QEMU_CFLAGS="$QEMU_CFLAGS $libpmem_cflags"
5627         else
5628                 if test "$libpmem" = "yes" ; then
5629                         feature_not_found "libpmem" "Install nvml or pmdk"
5630                 fi
5631                 libpmem="no"
5632         fi
5633 fi
5634
5635 ##########################################
5636 # End of CC checks
5637 # After here, no more $cc or $ld runs
5638
5639 write_c_skeleton
5640
5641 if test "$gcov" = "yes" ; then
5642   CFLAGS="-fprofile-arcs -ftest-coverage -g $CFLAGS"
5643   LDFLAGS="-fprofile-arcs -ftest-coverage $LDFLAGS"
5644 elif test "$fortify_source" = "yes" ; then
5645   CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS"
5646 elif test "$debug" = "no"; then
5647   CFLAGS="-O2 $CFLAGS"
5648 fi
5649
5650 if test "$have_asan" = "yes"; then
5651   CFLAGS="-fsanitize=address $CFLAGS"
5652   if test "$have_asan_iface_h" = "no" ; then
5653       echo "ASAN build enabled, but ASAN header missing." \
5654            "Without code annotation, the report may be inferior."
5655   elif test "$have_asan_iface_fiber" = "no" ; then
5656       echo "ASAN build enabled, but ASAN header is too old." \
5657            "Without code annotation, the report may be inferior."
5658   fi
5659 fi
5660 if test "$have_ubsan" = "yes"; then
5661   CFLAGS="-fsanitize=undefined $CFLAGS"
5662 fi
5663
5664 ##########################################
5665 # Do we have libnfs
5666 if test "$libnfs" != "no" ; then
5667   if $pkg_config --atleast-version=1.9.3 libnfs; then
5668     libnfs="yes"
5669     libnfs_libs=$($pkg_config --libs libnfs)
5670   else
5671     if test "$libnfs" = "yes" ; then
5672       feature_not_found "libnfs" "Install libnfs devel >= 1.9.3"
5673     fi
5674     libnfs="no"
5675   fi
5676 fi
5677
5678 # Now we've finished running tests it's OK to add -Werror to the compiler flags
5679 if test "$werror" = "yes"; then
5680     QEMU_CFLAGS="-Werror $QEMU_CFLAGS"
5681 fi
5682
5683 if test "$solaris" = "no" ; then
5684     if $ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then
5685         LDFLAGS="-Wl,--warn-common $LDFLAGS"
5686     fi
5687 fi
5688
5689 # test if pod2man has --utf8 option
5690 if pod2man --help | grep -q utf8; then
5691     POD2MAN="pod2man --utf8"
5692 else
5693     POD2MAN="pod2man"
5694 fi
5695
5696 # Use ASLR, no-SEH and DEP if available
5697 if test "$mingw32" = "yes" ; then
5698     for flag in --dynamicbase --no-seh --nxcompat; do
5699         if ld_has $flag ; then
5700             LDFLAGS="-Wl,$flag $LDFLAGS"
5701         fi
5702     done
5703 fi
5704
5705 qemu_confdir=$sysconfdir$confsuffix
5706 qemu_moddir=$libdir$confsuffix
5707 qemu_datadir=$datadir$confsuffix
5708 qemu_localedir="$datadir/locale"
5709
5710 # We can only support ivshmem if we have eventfd
5711 if [ "$eventfd" = "yes" ]; then
5712   ivshmem=yes
5713 fi
5714
5715 tools=""
5716 if test "$want_tools" = "yes" ; then
5717   tools="qemu-img\$(EXESUF) qemu-io\$(EXESUF) qemu-edid\$(EXESUF) $tools"
5718   if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then
5719     tools="qemu-nbd\$(EXESUF) $tools"
5720   fi
5721   if [ "$ivshmem" = "yes" ]; then
5722     tools="ivshmem-client\$(EXESUF) ivshmem-server\$(EXESUF) $tools"
5723   fi
5724   if [ "$posix" = "yes" ] && [ "$curl" = "yes" ]; then
5725     tools="elf2dmp $tools"
5726   fi
5727 fi
5728 if test "$softmmu" = yes ; then
5729   if test "$linux" = yes; then
5730     if test "$virtfs" != no && test "$cap" = yes && test "$attr" = yes ; then
5731       virtfs=yes
5732       tools="$tools fsdev/virtfs-proxy-helper\$(EXESUF)"
5733     else
5734       if test "$virtfs" = yes; then
5735         error_exit "VirtFS requires libcap devel and libattr devel"
5736       fi
5737       virtfs=no
5738     fi
5739     if test "$mpath" != no && test "$mpathpersist" = yes ; then
5740       mpath=yes
5741     else
5742       if test "$mpath" = yes; then
5743         error_exit "Multipath requires libmpathpersist devel"
5744       fi
5745       mpath=no
5746     fi
5747     tools="$tools scsi/qemu-pr-helper\$(EXESUF)"
5748   else
5749     if test "$virtfs" = yes; then
5750       error_exit "VirtFS is supported only on Linux"
5751     fi
5752     virtfs=no
5753     if test "$mpath" = yes; then
5754       error_exit "Multipath is supported only on Linux"
5755     fi
5756     mpath=no
5757   fi
5758   if test "$xkbcommon" = "yes"; then
5759     tools="qemu-keymap\$(EXESUF) $tools"
5760   fi
5761 fi
5762
5763 # Probe for guest agent support/options
5764
5765 if [ "$guest_agent" != "no" ]; then
5766   if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
5767       tools="qemu-ga $tools"
5768       guest_agent=yes
5769   elif [ "$guest_agent" != yes ]; then
5770       guest_agent=no
5771   else
5772       error_exit "Guest agent is not supported on this platform"
5773   fi
5774 fi
5775
5776 # Guest agent Window MSI  package
5777
5778 if test "$guest_agent" != yes; then
5779   if test "$guest_agent_msi" = yes; then
5780     error_exit "MSI guest agent package requires guest agent enabled"
5781   fi
5782   guest_agent_msi=no
5783 elif test "$mingw32" != "yes"; then
5784   if test "$guest_agent_msi" = "yes"; then
5785     error_exit "MSI guest agent package is available only for MinGW Windows cross-compilation"
5786   fi
5787   guest_agent_msi=no
5788 elif ! has wixl; then
5789   if test "$guest_agent_msi" = "yes"; then
5790     error_exit "MSI guest agent package requires wixl tool installed ( usually from msitools package )"
5791   fi
5792   guest_agent_msi=no
5793 else
5794   # we support qemu-ga, mingw32, and wixl: default to MSI enabled if it wasn't
5795   # disabled explicitly
5796   if test "$guest_agent_msi" != "no"; then
5797     guest_agent_msi=yes
5798   fi
5799 fi
5800
5801 if test "$guest_agent_msi" = "yes"; then
5802   if test "$guest_agent_with_vss" = "yes"; then
5803     QEMU_GA_MSI_WITH_VSS="-D InstallVss"
5804   fi
5805
5806   if test "$QEMU_GA_MANUFACTURER" = ""; then
5807     QEMU_GA_MANUFACTURER=QEMU
5808   fi
5809
5810   if test "$QEMU_GA_DISTRO" = ""; then
5811     QEMU_GA_DISTRO=Linux
5812   fi
5813
5814   if test "$QEMU_GA_VERSION" = ""; then
5815       QEMU_GA_VERSION=$(cat $source_path/VERSION)
5816   fi
5817
5818   QEMU_GA_MSI_MINGW_DLL_PATH="-D Mingw_dlls=$($pkg_config --variable=prefix glib-2.0)/bin"
5819
5820   case "$cpu" in
5821   x86_64)
5822     QEMU_GA_MSI_ARCH="-a x64 -D Arch=64"
5823     ;;
5824   i386)
5825     QEMU_GA_MSI_ARCH="-D Arch=32"
5826     ;;
5827   *)
5828     error_exit "CPU $cpu not supported for building installation package"
5829     ;;
5830   esac
5831 fi
5832
5833 # Mac OS X ships with a broken assembler
5834 roms=
5835 if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) -a \
5836         "$targetos" != "Darwin" -a "$targetos" != "SunOS" -a \
5837         "$softmmu" = yes ; then
5838     # Different host OS linkers have different ideas about the name of the ELF
5839     # emulation. Linux and OpenBSD/amd64 use 'elf_i386'; FreeBSD uses the _fbsd
5840     # variant; OpenBSD/i386 uses the _obsd variant; and Windows uses i386pe.
5841     for emu in elf_i386 elf_i386_fbsd elf_i386_obsd i386pe; do
5842         if "$ld" -verbose 2>&1 | grep -q "^[[:space:]]*$emu[[:space:]]*$"; then
5843             ld_i386_emulation="$emu"
5844             roms="optionrom"
5845             break
5846         fi
5847     done
5848 fi
5849 if test "$cpu" = "ppc64" -a "$targetos" != "Darwin" ; then
5850   roms="$roms spapr-rtas"
5851 fi
5852
5853 if test "$cpu" = "s390x" ; then
5854   roms="$roms s390-ccw"
5855 fi
5856
5857 # Probe for the need for relocating the user-only binary.
5858 if ( [ "$linux_user" = yes ] || [ "$bsd_user" = yes ] ) && [ "$pie" = no ]; then
5859   textseg_addr=
5860   case "$cpu" in
5861     arm | i386 | ppc* | s390* | sparc* | x86_64 | x32)
5862       # ??? Rationale for choosing this address
5863       textseg_addr=0x60000000
5864       ;;
5865     mips)
5866       # A 256M aligned address, high in the address space, with enough
5867       # room for the code_gen_buffer above it before the stack.
5868       textseg_addr=0x60000000
5869       ;;
5870   esac
5871   if [ -n "$textseg_addr" ]; then
5872     cat > $TMPC <<EOF
5873     int main(void) { return 0; }
5874 EOF
5875     textseg_ldflags="-Wl,-Ttext-segment=$textseg_addr"
5876     if ! compile_prog "" "$textseg_ldflags"; then
5877       # In case ld does not support -Ttext-segment, edit the default linker
5878       # script via sed to set the .text start addr.  This is needed on FreeBSD
5879       # at least.
5880       if ! $ld --verbose >/dev/null 2>&1; then
5881         error_exit \
5882             "We need to link the QEMU user mode binaries at a" \
5883             "specific text address. Unfortunately your linker" \
5884             "doesn't support either the -Ttext-segment option or" \
5885             "printing the default linker script with --verbose." \
5886             "If you don't want the user mode binaries, pass the" \
5887             "--disable-user option to configure."
5888       fi
5889
5890       $ld --verbose | sed \
5891         -e '1,/==================================================/d' \
5892         -e '/==================================================/,$d' \
5893         -e "s/[.] = [0-9a-fx]* [+] SIZEOF_HEADERS/. = $textseg_addr + SIZEOF_HEADERS/" \
5894         -e "s/__executable_start = [0-9a-fx]*/__executable_start = $textseg_addr/" > config-host.ld
5895       textseg_ldflags="-Wl,-T../config-host.ld"
5896     fi
5897   fi
5898 fi
5899
5900 # Check that the C++ compiler exists and works with the C compiler.
5901 # All the QEMU_CXXFLAGS are based on QEMU_CFLAGS. Keep this at the end to don't miss any other that could be added.
5902 if has $cxx; then
5903     cat > $TMPC <<EOF
5904 int c_function(void);
5905 int main(void) { return c_function(); }
5906 EOF
5907
5908     compile_object
5909
5910     cat > $TMPCXX <<EOF
5911 extern "C" {
5912    int c_function(void);
5913 }
5914 int c_function(void) { return 42; }
5915 EOF
5916
5917     update_cxxflags
5918
5919     if do_cxx $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $LDFLAGS; then
5920         # C++ compiler $cxx works ok with C compiler $cc
5921         :
5922     else
5923         echo "C++ compiler $cxx does not work with C compiler $cc"
5924         echo "Disabling C++ specific optional code"
5925         cxx=
5926     fi
5927 else
5928     echo "No C++ compiler available; disabling C++ specific optional code"
5929     cxx=
5930 fi
5931
5932 echo_version() {
5933     if test "$1" = "yes" ; then
5934         echo "($2)"
5935     fi
5936 }
5937
5938 # prepend pixman and ftd flags after all config tests are done
5939 QEMU_CFLAGS="$pixman_cflags $fdt_cflags $QEMU_CFLAGS"
5940 QEMU_LDFLAGS="$fdt_ldflags $QEMU_LDFLAGS"
5941 libs_softmmu="$pixman_libs $libs_softmmu"
5942
5943 echo "Install prefix    $prefix"
5944 echo "BIOS directory    $(eval echo $qemu_datadir)"
5945 echo "firmware path     $(eval echo $firmwarepath)"
5946 echo "binary directory  $(eval echo $bindir)"
5947 echo "library directory $(eval echo $libdir)"
5948 echo "module directory  $(eval echo $qemu_moddir)"
5949 echo "libexec directory $(eval echo $libexecdir)"
5950 echo "include directory $(eval echo $includedir)"
5951 echo "config directory  $(eval echo $sysconfdir)"
5952 if test "$mingw32" = "no" ; then
5953 echo "local state directory   $(eval echo $local_statedir)"
5954 echo "Manual directory  $(eval echo $mandir)"
5955 echo "ELF interp prefix $interp_prefix"
5956 else
5957 echo "local state directory   queried at runtime"
5958 echo "Windows SDK       $win_sdk"
5959 fi
5960 echo "Source path       $source_path"
5961 echo "GIT binary        $git"
5962 echo "GIT submodules    $git_submodules"
5963 echo "C compiler        $cc"
5964 echo "Host C compiler   $host_cc"
5965 echo "C++ compiler      $cxx"
5966 echo "Objective-C compiler $objcc"
5967 echo "ARFLAGS           $ARFLAGS"
5968 echo "CFLAGS            $CFLAGS"
5969 echo "QEMU_CFLAGS       $QEMU_CFLAGS"
5970 echo "LDFLAGS           $LDFLAGS"
5971 echo "QEMU_LDFLAGS      $QEMU_LDFLAGS"
5972 echo "make              $make"
5973 echo "install           $install"
5974 echo "python            $python"
5975 if test "$slirp" = "yes" ; then
5976     echo "smbd              $smbd"
5977 fi
5978 echo "module support    $modules"
5979 echo "host CPU          $cpu"
5980 echo "host big endian   $bigendian"
5981 echo "target list       $target_list"
5982 echo "gprof enabled     $gprof"
5983 echo "sparse enabled    $sparse"
5984 echo "strip binaries    $strip_opt"
5985 echo "profiler          $profiler"
5986 echo "static build      $static"
5987 if test "$darwin" = "yes" ; then
5988     echo "Cocoa support     $cocoa"
5989 fi
5990 echo "SDL support       $sdl $(echo_version $sdl $sdlversion)"
5991 echo "GTK support       $gtk $(echo_version $gtk $gtk_version)"
5992 echo "GTK GL support    $gtk_gl"
5993 echo "VTE support       $vte $(echo_version $vte $vteversion)"
5994 echo "TLS priority      $tls_priority"
5995 echo "GNUTLS support    $gnutls"
5996 echo "GNUTLS rnd        $gnutls_rnd"
5997 echo "libgcrypt         $gcrypt"
5998 echo "libgcrypt kdf     $gcrypt_kdf"
5999 echo "nettle            $nettle $(echo_version $nettle $nettle_version)"
6000 echo "nettle kdf        $nettle_kdf"
6001 echo "libtasn1          $tasn1"
6002 echo "curses support    $curses"
6003 echo "virgl support     $virglrenderer $(echo_version $virglrenderer $virgl_version)"
6004 echo "curl support      $curl"
6005 echo "mingw32 support   $mingw32"
6006 echo "Audio drivers     $audio_drv_list"
6007 echo "Block whitelist (rw) $block_drv_rw_whitelist"
6008 echo "Block whitelist (ro) $block_drv_ro_whitelist"
6009 echo "VirtFS support    $virtfs"
6010 echo "Multipath support $mpath"
6011 echo "VNC support       $vnc"
6012 if test "$vnc" = "yes" ; then
6013     echo "VNC SASL support  $vnc_sasl"
6014     echo "VNC JPEG support  $vnc_jpeg"
6015     echo "VNC PNG support   $vnc_png"
6016 fi
6017 if test -n "$sparc_cpu"; then
6018     echo "Target Sparc Arch $sparc_cpu"
6019 fi
6020 echo "xen support       $xen"
6021 if test "$xen" = "yes" ; then
6022   echo "xen ctrl version  $xen_ctrl_version"
6023   echo "pv dom build      $xen_pv_domain_build"
6024 fi
6025 echo "brlapi support    $brlapi"
6026 echo "bluez  support    $bluez"
6027 echo "Documentation     $docs"
6028 echo "PIE               $pie"
6029 echo "vde support       $vde"
6030 echo "netmap support    $netmap"
6031 echo "Linux AIO support $linux_aio"
6032 echo "ATTR/XATTR support $attr"
6033 echo "Install blobs     $blobs"
6034 echo "KVM support       $kvm"
6035 echo "HAX support       $hax"
6036 echo "HVF support       $hvf"
6037 echo "WHPX support      $whpx"
6038 echo "TCG support       $tcg"
6039 if test "$tcg" = "yes" ; then
6040     echo "TCG debug enabled $debug_tcg"
6041     echo "TCG interpreter   $tcg_interpreter"
6042 fi
6043 echo "malloc trim support $malloc_trim"
6044 echo "RDMA support      $rdma"
6045 echo "PVRDMA support    $pvrdma"
6046 echo "fdt support       $fdt"
6047 echo "membarrier        $membarrier"
6048 echo "preadv support    $preadv"
6049 echo "fdatasync         $fdatasync"
6050 echo "madvise           $madvise"
6051 echo "posix_madvise     $posix_madvise"
6052 echo "posix_memalign    $posix_memalign"
6053 echo "libcap-ng support $cap_ng"
6054 echo "vhost-net support $vhost_net"
6055 echo "vhost-crypto support $vhost_crypto"
6056 echo "vhost-scsi support $vhost_scsi"
6057 echo "vhost-vsock support $vhost_vsock"
6058 echo "vhost-user support $vhost_user"
6059 echo "Trace backends    $trace_backends"
6060 if have_backend "simple"; then
6061 echo "Trace output file $trace_file-<pid>"
6062 fi
6063 echo "spice support     $spice $(echo_version $spice $spice_protocol_version/$spice_server_version)"
6064 echo "rbd support       $rbd"
6065 echo "xfsctl support    $xfs"
6066 echo "smartcard support $smartcard"
6067 echo "libusb            $libusb"
6068 echo "usb net redir     $usb_redir"
6069 echo "OpenGL support    $opengl"
6070 echo "OpenGL dmabufs    $opengl_dmabuf"
6071 echo "libiscsi support  $libiscsi"
6072 echo "libnfs support    $libnfs"
6073 echo "build guest agent $guest_agent"
6074 echo "QGA VSS support   $guest_agent_with_vss"
6075 echo "QGA w32 disk info $guest_agent_ntddscsi"
6076 echo "QGA MSI support   $guest_agent_msi"
6077 echo "seccomp support   $seccomp"
6078 echo "coroutine backend $coroutine"
6079 echo "coroutine pool    $coroutine_pool"
6080 echo "debug stack usage $debug_stack_usage"
6081 echo "mutex debugging   $debug_mutex"
6082 echo "crypto afalg      $crypto_afalg"
6083 echo "GlusterFS support $glusterfs"
6084 echo "gcov              $gcov_tool"
6085 echo "gcov enabled      $gcov"
6086 echo "TPM support       $tpm"
6087 echo "libssh2 support   $libssh2"
6088 echo "TPM passthrough   $tpm_passthrough"
6089 echo "TPM emulator      $tpm_emulator"
6090 echo "QOM debugging     $qom_cast_debug"
6091 echo "Live block migration $live_block_migration"
6092 echo "lzo support       $lzo"
6093 echo "snappy support    $snappy"
6094 echo "bzip2 support     $bzip2"
6095 echo "NUMA host support $numa"
6096 echo "libxml2           $libxml2"
6097 echo "tcmalloc support  $tcmalloc"
6098 echo "jemalloc support  $jemalloc"
6099 echo "avx2 optimization $avx2_opt"
6100 echo "replication support $replication"
6101 echo "VxHS block device $vxhs"
6102 echo "capstone          $capstone"
6103 echo "docker            $docker"
6104 echo "libpmem support   $libpmem"
6105
6106 if test "$sdl_too_old" = "yes"; then
6107 echo "-> Your SDL version is too old - please upgrade to have SDL support"
6108 fi
6109
6110 if test "$gtkabi" = "2.0"; then
6111     echo
6112     echo "WARNING: Use of GTK 2.0 is deprecated and will be removed in"
6113     echo "WARNING: future releases. Please switch to using GTK 3.0"
6114 fi
6115
6116 if test "$sdlabi" = "1.2"; then
6117     echo
6118     echo "WARNING: Use of SDL 1.2 is deprecated and will be removed in"
6119     echo "WARNING: future releases. Please switch to using SDL 2.0"
6120 fi
6121
6122 if test "$supported_cpu" = "no"; then
6123     echo
6124     echo "WARNING: SUPPORT FOR THIS HOST CPU WILL GO AWAY IN FUTURE RELEASES!"
6125     echo
6126     echo "CPU host architecture $cpu support is not currently maintained."
6127     echo "The QEMU project intends to remove support for this host CPU in"
6128     echo "a future release if nobody volunteers to maintain it and to"
6129     echo "provide a build host for our continuous integration setup."
6130     echo "configure has succeeded and you can continue to build, but"
6131     echo "if you care about QEMU on this platform you should contact"
6132     echo "us upstream at [email protected]."
6133 fi
6134
6135 if test "$supported_os" = "no"; then
6136     echo
6137     echo "WARNING: SUPPORT FOR THIS HOST OS WILL GO AWAY IN FUTURE RELEASES!"
6138     echo
6139     echo "Host OS $targetos support is not currently maintained."
6140     echo "The QEMU project intends to remove support for this host OS in"
6141     echo "a future release if nobody volunteers to maintain it and to"
6142     echo "provide a build host for our continuous integration setup."
6143     echo "configure has succeeded and you can continue to build, but"
6144     echo "if you care about QEMU on this platform you should contact"
6145     echo "us upstream at [email protected]."
6146 fi
6147
6148 config_host_mak="config-host.mak"
6149
6150 echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
6151
6152 echo "# Automatically generated by configure - do not modify" > $config_host_mak
6153 echo >> $config_host_mak
6154
6155 echo all: >> $config_host_mak
6156 echo "prefix=$prefix" >> $config_host_mak
6157 echo "bindir=$bindir" >> $config_host_mak
6158 echo "libdir=$libdir" >> $config_host_mak
6159 echo "libexecdir=$libexecdir" >> $config_host_mak
6160 echo "includedir=$includedir" >> $config_host_mak
6161 echo "mandir=$mandir" >> $config_host_mak
6162 echo "sysconfdir=$sysconfdir" >> $config_host_mak
6163 echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
6164 echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
6165 echo "qemu_firmwarepath=$firmwarepath" >> $config_host_mak
6166 echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
6167 echo "qemu_moddir=$qemu_moddir" >> $config_host_mak
6168 if test "$mingw32" = "no" ; then
6169   echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
6170 fi
6171 echo "qemu_helperdir=$libexecdir" >> $config_host_mak
6172 echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
6173 echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
6174 echo "GIT=$git" >> $config_host_mak
6175 echo "GIT_SUBMODULES=$git_submodules" >> $config_host_mak
6176 echo "GIT_UPDATE=$git_update" >> $config_host_mak
6177
6178 echo "ARCH=$ARCH" >> $config_host_mak
6179
6180 if test "$debug_tcg" = "yes" ; then
6181   echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
6182 fi
6183 if test "$strip_opt" = "yes" ; then
6184   echo "STRIP=${strip}" >> $config_host_mak
6185 fi
6186 if test "$bigendian" = "yes" ; then
6187   echo "HOST_WORDS_BIGENDIAN=y" >> $config_host_mak
6188 fi
6189 if test "$mingw32" = "yes" ; then
6190   echo "CONFIG_WIN32=y" >> $config_host_mak
6191   rc_version=$(cat $source_path/VERSION)
6192   version_major=${rc_version%%.*}
6193   rc_version=${rc_version#*.}
6194   version_minor=${rc_version%%.*}
6195   rc_version=${rc_version#*.}
6196   version_subminor=${rc_version%%.*}
6197   version_micro=0
6198   echo "CONFIG_FILEVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
6199   echo "CONFIG_PRODUCTVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
6200   if test "$guest_agent_with_vss" = "yes" ; then
6201     echo "CONFIG_QGA_VSS=y" >> $config_host_mak
6202     echo "QGA_VSS_PROVIDER=$qga_vss_provider" >> $config_host_mak
6203     echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak
6204   fi
6205   if test "$guest_agent_ntddscsi" = "yes" ; then
6206     echo "CONFIG_QGA_NTDDDISK=y" >> $config_host_mak
6207   fi
6208   if test "$guest_agent_msi" = "yes"; then
6209     echo "QEMU_GA_MSI_ENABLED=yes" >> $config_host_mak
6210     echo "QEMU_GA_MSI_MINGW_DLL_PATH=${QEMU_GA_MSI_MINGW_DLL_PATH}" >> $config_host_mak
6211     echo "QEMU_GA_MSI_WITH_VSS=${QEMU_GA_MSI_WITH_VSS}" >> $config_host_mak
6212     echo "QEMU_GA_MSI_ARCH=${QEMU_GA_MSI_ARCH}" >> $config_host_mak
6213     echo "QEMU_GA_MANUFACTURER=${QEMU_GA_MANUFACTURER}" >> $config_host_mak
6214     echo "QEMU_GA_DISTRO=${QEMU_GA_DISTRO}" >> $config_host_mak
6215     echo "QEMU_GA_VERSION=${QEMU_GA_VERSION}" >> $config_host_mak
6216   fi
6217 else
6218   echo "CONFIG_POSIX=y" >> $config_host_mak
6219 fi
6220
6221 if test "$linux" = "yes" ; then
6222   echo "CONFIG_LINUX=y" >> $config_host_mak
6223 fi
6224
6225 if test "$darwin" = "yes" ; then
6226   echo "CONFIG_DARWIN=y" >> $config_host_mak
6227 fi
6228
6229 if test "$solaris" = "yes" ; then
6230   echo "CONFIG_SOLARIS=y" >> $config_host_mak
6231 fi
6232 if test "$haiku" = "yes" ; then
6233   echo "CONFIG_HAIKU=y" >> $config_host_mak
6234 fi
6235 if test "$static" = "yes" ; then
6236   echo "CONFIG_STATIC=y" >> $config_host_mak
6237 fi
6238 if test "$profiler" = "yes" ; then
6239   echo "CONFIG_PROFILER=y" >> $config_host_mak
6240 fi
6241 if test "$slirp" = "yes" ; then
6242   echo "CONFIG_SLIRP=y" >> $config_host_mak
6243   echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
6244 fi
6245 if test "$vde" = "yes" ; then
6246   echo "CONFIG_VDE=y" >> $config_host_mak
6247   echo "VDE_LIBS=$vde_libs" >> $config_host_mak
6248 fi
6249 if test "$netmap" = "yes" ; then
6250   echo "CONFIG_NETMAP=y" >> $config_host_mak
6251 fi
6252 if test "$l2tpv3" = "yes" ; then
6253   echo "CONFIG_L2TPV3=y" >> $config_host_mak
6254 fi
6255 if test "$cap_ng" = "yes" ; then
6256   echo "CONFIG_LIBCAP=y" >> $config_host_mak
6257 fi
6258 echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak
6259 for drv in $audio_drv_list; do
6260     def=CONFIG_AUDIO_$(echo $drv | LC_ALL=C tr '[a-z]' '[A-Z]')
6261     case "$drv" in
6262         alsa | oss | pa | sdl)
6263             echo "$def=m" >> $config_host_mak ;;
6264         *)
6265             echo "$def=y" >> $config_host_mak ;;
6266     esac
6267 done
6268 echo "ALSA_LIBS=$alsa_libs" >> $config_host_mak
6269 echo "PULSE_LIBS=$pulse_libs" >> $config_host_mak
6270 echo "COREAUDIO_LIBS=$coreaudio_libs" >> $config_host_mak
6271 echo "DSOUND_LIBS=$dsound_libs" >> $config_host_mak
6272 echo "OSS_LIBS=$oss_libs" >> $config_host_mak
6273 if test "$audio_pt_int" = "yes" ; then
6274   echo "CONFIG_AUDIO_PT_INT=y" >> $config_host_mak
6275 fi
6276 if test "$audio_win_int" = "yes" ; then
6277   echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak
6278 fi
6279 echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
6280 echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
6281 if test "$vnc" = "yes" ; then
6282   echo "CONFIG_VNC=y" >> $config_host_mak
6283 fi
6284 if test "$vnc_sasl" = "yes" ; then
6285   echo "CONFIG_VNC_SASL=y" >> $config_host_mak
6286 fi
6287 if test "$vnc_jpeg" = "yes" ; then
6288   echo "CONFIG_VNC_JPEG=y" >> $config_host_mak
6289 fi
6290 if test "$vnc_png" = "yes" ; then
6291   echo "CONFIG_VNC_PNG=y" >> $config_host_mak
6292 fi
6293 if test "$xkbcommon" = "yes" ; then
6294   echo "XKBCOMMON_CFLAGS=$xkbcommon_cflags" >> $config_host_mak
6295   echo "XKBCOMMON_LIBS=$xkbcommon_libs" >> $config_host_mak
6296 fi
6297 if test "$fnmatch" = "yes" ; then
6298   echo "CONFIG_FNMATCH=y" >> $config_host_mak
6299 fi
6300 if test "$xfs" = "yes" ; then
6301   echo "CONFIG_XFS=y" >> $config_host_mak
6302 fi
6303 qemu_version=$(head $source_path/VERSION)
6304 echo "VERSION=$qemu_version" >>$config_host_mak
6305 echo "PKGVERSION=$pkgversion" >>$config_host_mak
6306 echo "SRC_PATH=$source_path" >> $config_host_mak
6307 echo "TARGET_DIRS=$target_list" >> $config_host_mak
6308 if [ "$docs" = "yes" ] ; then
6309   echo "BUILD_DOCS=yes" >> $config_host_mak
6310 fi
6311 if test "$modules" = "yes"; then
6312   # $shacmd can generate a hash started with digit, which the compiler doesn't
6313   # like as an symbol. So prefix it with an underscore
6314   echo "CONFIG_STAMP=_$( (echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ )" >> $config_host_mak
6315   echo "CONFIG_MODULES=y" >> $config_host_mak
6316 fi
6317 if test "$have_x11" = "yes" -a "$need_x11" = "yes"; then
6318   echo "CONFIG_X11=y" >> $config_host_mak
6319   echo "X11_CFLAGS=$x11_cflags" >> $config_host_mak
6320   echo "X11_LIBS=$x11_libs" >> $config_host_mak
6321 fi
6322 if test "$sdl" = "yes" ; then
6323   echo "CONFIG_SDL=m" >> $config_host_mak
6324   echo "CONFIG_SDLABI=$sdlabi" >> $config_host_mak
6325   echo "SDL_CFLAGS=$sdl_cflags" >> $config_host_mak
6326   echo "SDL_LIBS=$sdl_libs" >> $config_host_mak
6327 fi
6328 if test "$cocoa" = "yes" ; then
6329   echo "CONFIG_COCOA=y" >> $config_host_mak
6330 fi
6331 if test "$curses" = "yes" ; then
6332   echo "CONFIG_CURSES=m" >> $config_host_mak
6333   echo "CURSES_CFLAGS=$curses_inc" >> $config_host_mak
6334   echo "CURSES_LIBS=$curses_lib" >> $config_host_mak
6335 fi
6336 if test "$pipe2" = "yes" ; then
6337   echo "CONFIG_PIPE2=y" >> $config_host_mak
6338 fi
6339 if test "$accept4" = "yes" ; then
6340   echo "CONFIG_ACCEPT4=y" >> $config_host_mak
6341 fi
6342 if test "$splice" = "yes" ; then
6343   echo "CONFIG_SPLICE=y" >> $config_host_mak
6344 fi
6345 if test "$eventfd" = "yes" ; then
6346   echo "CONFIG_EVENTFD=y" >> $config_host_mak
6347 fi
6348 if test "$memfd" = "yes" ; then
6349   echo "CONFIG_MEMFD=y" >> $config_host_mak
6350 fi
6351 if test "$fallocate" = "yes" ; then
6352   echo "CONFIG_FALLOCATE=y" >> $config_host_mak
6353 fi
6354 if test "$fallocate_punch_hole" = "yes" ; then
6355   echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak
6356 fi
6357 if test "$fallocate_zero_range" = "yes" ; then
6358   echo "CONFIG_FALLOCATE_ZERO_RANGE=y" >> $config_host_mak
6359 fi
6360 if test "$posix_fallocate" = "yes" ; then
6361   echo "CONFIG_POSIX_FALLOCATE=y" >> $config_host_mak
6362 fi
6363 if test "$sync_file_range" = "yes" ; then
6364   echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak
6365 fi
6366 if test "$fiemap" = "yes" ; then
6367   echo "CONFIG_FIEMAP=y" >> $config_host_mak
6368 fi
6369 if test "$dup3" = "yes" ; then
6370   echo "CONFIG_DUP3=y" >> $config_host_mak
6371 fi
6372 if test "$ppoll" = "yes" ; then
6373   echo "CONFIG_PPOLL=y" >> $config_host_mak
6374 fi
6375 if test "$prctl_pr_set_timerslack" = "yes" ; then
6376   echo "CONFIG_PRCTL_PR_SET_TIMERSLACK=y" >> $config_host_mak
6377 fi
6378 if test "$epoll" = "yes" ; then
6379   echo "CONFIG_EPOLL=y" >> $config_host_mak
6380 fi
6381 if test "$epoll_create1" = "yes" ; then
6382   echo "CONFIG_EPOLL_CREATE1=y" >> $config_host_mak
6383 fi
6384 if test "$sendfile" = "yes" ; then
6385   echo "CONFIG_SENDFILE=y" >> $config_host_mak
6386 fi
6387 if test "$timerfd" = "yes" ; then
6388   echo "CONFIG_TIMERFD=y" >> $config_host_mak
6389 fi
6390 if test "$setns" = "yes" ; then
6391   echo "CONFIG_SETNS=y" >> $config_host_mak
6392 fi
6393 if test "$clock_adjtime" = "yes" ; then
6394   echo "CONFIG_CLOCK_ADJTIME=y" >> $config_host_mak
6395 fi
6396 if test "$syncfs" = "yes" ; then
6397   echo "CONFIG_SYNCFS=y" >> $config_host_mak
6398 fi
6399 if test "$inotify" = "yes" ; then
6400   echo "CONFIG_INOTIFY=y" >> $config_host_mak
6401 fi
6402 if test "$inotify1" = "yes" ; then
6403   echo "CONFIG_INOTIFY1=y" >> $config_host_mak
6404 fi
6405 if test "$sem_timedwait" = "yes" ; then
6406   echo "CONFIG_SEM_TIMEDWAIT=y" >> $config_host_mak
6407 fi
6408 if test "$strchrnul" = "yes" ; then
6409   echo "HAVE_STRCHRNUL=y" >> $config_host_mak
6410 fi
6411 if test "$byteswap_h" = "yes" ; then
6412   echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak
6413 fi
6414 if test "$bswap_h" = "yes" ; then
6415   echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak
6416 fi
6417 if test "$curl" = "yes" ; then
6418   echo "CONFIG_CURL=m" >> $config_host_mak
6419   echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak
6420   echo "CURL_LIBS=$curl_libs" >> $config_host_mak
6421 fi
6422 if test "$brlapi" = "yes" ; then
6423   echo "CONFIG_BRLAPI=y" >> $config_host_mak
6424   echo "BRLAPI_LIBS=$brlapi_libs" >> $config_host_mak
6425 fi
6426 if test "$bluez" = "yes" ; then
6427   echo "CONFIG_BLUEZ=y" >> $config_host_mak
6428   echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak
6429 fi
6430 if test "$gtk" = "yes" ; then
6431   echo "CONFIG_GTK=m" >> $config_host_mak
6432   echo "CONFIG_GTKABI=$gtkabi" >> $config_host_mak
6433   echo "GTK_CFLAGS=$gtk_cflags" >> $config_host_mak
6434   echo "GTK_LIBS=$gtk_libs" >> $config_host_mak
6435   if test "$gtk_gl" = "yes" ; then
6436     echo "CONFIG_GTK_GL=y" >> $config_host_mak
6437   fi
6438 fi
6439 echo "CONFIG_TLS_PRIORITY=\"$tls_priority\"" >> $config_host_mak
6440 if test "$gnutls" = "yes" ; then
6441   echo "CONFIG_GNUTLS=y" >> $config_host_mak
6442 fi
6443 if test "$gnutls_rnd" = "yes" ; then
6444   echo "CONFIG_GNUTLS_RND=y" >> $config_host_mak
6445 fi
6446 if test "$gcrypt" = "yes" ; then
6447   echo "CONFIG_GCRYPT=y" >> $config_host_mak
6448   if test "$gcrypt_hmac" = "yes" ; then
6449     echo "CONFIG_GCRYPT_HMAC=y" >> $config_host_mak
6450   fi
6451   if test "$gcrypt_kdf" = "yes" ; then
6452     echo "CONFIG_GCRYPT_KDF=y" >> $config_host_mak
6453   fi
6454 fi
6455 if test "$nettle" = "yes" ; then
6456   echo "CONFIG_NETTLE=y" >> $config_host_mak
6457   echo "CONFIG_NETTLE_VERSION_MAJOR=${nettle_version%%.*}" >> $config_host_mak
6458   if test "$nettle_kdf" = "yes" ; then
6459     echo "CONFIG_NETTLE_KDF=y" >> $config_host_mak
6460   fi
6461 fi
6462 if test "$tasn1" = "yes" ; then
6463   echo "CONFIG_TASN1=y" >> $config_host_mak
6464 fi
6465 if test "$have_ifaddrs_h" = "yes" ; then
6466     echo "HAVE_IFADDRS_H=y" >> $config_host_mak
6467 fi
6468 if test "$have_broken_size_max" = "yes" ; then
6469     echo "HAVE_BROKEN_SIZE_MAX=y" >> $config_host_mak
6470 fi
6471
6472 # Work around a system header bug with some kernel/XFS header
6473 # versions where they both try to define 'struct fsxattr':
6474 # xfs headers will not try to redefine structs from linux headers
6475 # if this macro is set.
6476 if test "$have_fsxattr" = "yes" ; then
6477     echo "HAVE_FSXATTR=y" >> $config_host_mak
6478 fi
6479 if test "$have_copy_file_range" = "yes" ; then
6480     echo "HAVE_COPY_FILE_RANGE=y" >> $config_host_mak
6481 fi
6482 if test "$vte" = "yes" ; then
6483   echo "CONFIG_VTE=y" >> $config_host_mak
6484   echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak
6485   echo "VTE_LIBS=$vte_libs" >> $config_host_mak
6486 fi
6487 if test "$virglrenderer" = "yes" ; then
6488   echo "CONFIG_VIRGL=y" >> $config_host_mak
6489   echo "VIRGL_CFLAGS=$virgl_cflags" >> $config_host_mak
6490   echo "VIRGL_LIBS=$virgl_libs" >> $config_host_mak
6491 fi
6492 if test "$xen" = "yes" ; then
6493   echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
6494   echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
6495   if test "$xen_pv_domain_build" = "yes" ; then
6496     echo "CONFIG_XEN_PV_DOMAIN_BUILD=y" >> $config_host_mak
6497   fi
6498 fi
6499 if test "$linux_aio" = "yes" ; then
6500   echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
6501 fi
6502 if test "$attr" = "yes" ; then
6503   echo "CONFIG_ATTR=y" >> $config_host_mak
6504 fi
6505 if test "$libattr" = "yes" ; then
6506   echo "CONFIG_LIBATTR=y" >> $config_host_mak
6507 fi
6508 if test "$virtfs" = "yes" ; then
6509   echo "CONFIG_VIRTFS=y" >> $config_host_mak
6510 fi
6511 if test "$mpath" = "yes" ; then
6512   echo "CONFIG_MPATH=y" >> $config_host_mak
6513   if test "$mpathpersist_new_api" = "yes"; then
6514     echo "CONFIG_MPATH_NEW_API=y" >> $config_host_mak
6515   fi
6516 fi
6517 if test "$vhost_scsi" = "yes" ; then
6518   echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
6519 fi
6520 if test "$vhost_net" = "yes" -a "$vhost_user" = "yes"; then
6521   echo "CONFIG_VHOST_NET_USED=y" >> $config_host_mak
6522 fi
6523 if test "$vhost_crypto" = "yes" ; then
6524   echo "CONFIG_VHOST_CRYPTO=y" >> $config_host_mak
6525 fi
6526 if test "$vhost_vsock" = "yes" ; then
6527   echo "CONFIG_VHOST_VSOCK=y" >> $config_host_mak
6528 fi
6529 if test "$vhost_user" = "yes" ; then
6530   echo "CONFIG_VHOST_USER=y" >> $config_host_mak
6531 fi
6532 if test "$blobs" = "yes" ; then
6533   echo "INSTALL_BLOBS=yes" >> $config_host_mak
6534 fi
6535 if test "$iovec" = "yes" ; then
6536   echo "CONFIG_IOVEC=y" >> $config_host_mak
6537 fi
6538 if test "$preadv" = "yes" ; then
6539   echo "CONFIG_PREADV=y" >> $config_host_mak
6540 fi
6541 if test "$fdt" != "no" ; then
6542   echo "CONFIG_FDT=y" >> $config_host_mak
6543 fi
6544 if test "$membarrier" = "yes" ; then
6545   echo "CONFIG_MEMBARRIER=y" >> $config_host_mak
6546 fi
6547 if test "$signalfd" = "yes" ; then
6548   echo "CONFIG_SIGNALFD=y" >> $config_host_mak
6549 fi
6550 if test "$tcg" = "yes"; then
6551   echo "CONFIG_TCG=y" >> $config_host_mak
6552   if test "$tcg_interpreter" = "yes" ; then
6553     echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
6554   fi
6555 fi
6556 if test "$fdatasync" = "yes" ; then
6557   echo "CONFIG_FDATASYNC=y" >> $config_host_mak
6558 fi
6559 if test "$madvise" = "yes" ; then
6560   echo "CONFIG_MADVISE=y" >> $config_host_mak
6561 fi
6562 if test "$posix_madvise" = "yes" ; then
6563   echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak
6564 fi
6565 if test "$posix_memalign" = "yes" ; then
6566   echo "CONFIG_POSIX_MEMALIGN=y" >> $config_host_mak
6567 fi
6568
6569 if test "$spice" = "yes" ; then
6570   echo "CONFIG_SPICE=y" >> $config_host_mak
6571 fi
6572
6573 if test "$smartcard" = "yes" ; then
6574   echo "CONFIG_SMARTCARD=y" >> $config_host_mak
6575   echo "SMARTCARD_CFLAGS=$libcacard_cflags" >> $config_host_mak
6576   echo "SMARTCARD_LIBS=$libcacard_libs" >> $config_host_mak
6577 fi
6578
6579 if test "$libusb" = "yes" ; then
6580   echo "CONFIG_USB_LIBUSB=y" >> $config_host_mak
6581   echo "LIBUSB_CFLAGS=$libusb_cflags" >> $config_host_mak
6582   echo "LIBUSB_LIBS=$libusb_libs" >> $config_host_mak
6583 fi
6584
6585 if test "$usb_redir" = "yes" ; then
6586   echo "CONFIG_USB_REDIR=y" >> $config_host_mak
6587   echo "USB_REDIR_CFLAGS=$usb_redir_cflags" >> $config_host_mak
6588   echo "USB_REDIR_LIBS=$usb_redir_libs" >> $config_host_mak
6589 fi
6590
6591 if test "$opengl" = "yes" ; then
6592   echo "CONFIG_OPENGL=y" >> $config_host_mak
6593   echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak
6594   if test "$opengl_dmabuf" = "yes" ; then
6595     echo "CONFIG_OPENGL_DMABUF=y" >> $config_host_mak
6596   fi
6597 fi
6598
6599 if test "$malloc_trim" = "yes" ; then
6600   echo "CONFIG_MALLOC_TRIM=y" >> $config_host_mak
6601 fi
6602
6603 if test "$avx2_opt" = "yes" ; then
6604   echo "CONFIG_AVX2_OPT=y" >> $config_host_mak
6605 fi
6606
6607 if test "$lzo" = "yes" ; then
6608   echo "CONFIG_LZO=y" >> $config_host_mak
6609 fi
6610
6611 if test "$snappy" = "yes" ; then
6612   echo "CONFIG_SNAPPY=y" >> $config_host_mak
6613 fi
6614
6615 if test "$bzip2" = "yes" ; then
6616   echo "CONFIG_BZIP2=y" >> $config_host_mak
6617   echo "BZIP2_LIBS=-lbz2" >> $config_host_mak
6618 fi
6619
6620 if test "$libiscsi" = "yes" ; then
6621   echo "CONFIG_LIBISCSI=m" >> $config_host_mak
6622   echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
6623   echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak
6624 fi
6625
6626 if test "$libnfs" = "yes" ; then
6627   echo "CONFIG_LIBNFS=m" >> $config_host_mak
6628   echo "LIBNFS_LIBS=$libnfs_libs" >> $config_host_mak
6629 fi
6630
6631 if test "$seccomp" = "yes"; then
6632   echo "CONFIG_SECCOMP=y" >> $config_host_mak
6633   echo "SECCOMP_CFLAGS=$seccomp_cflags" >> $config_host_mak
6634   echo "SECCOMP_LIBS=$seccomp_libs" >> $config_host_mak
6635 fi
6636
6637 # XXX: suppress that
6638 if [ "$bsd" = "yes" ] ; then
6639   echo "CONFIG_BSD=y" >> $config_host_mak
6640 fi
6641
6642 if test "$localtime_r" = "yes" ; then
6643   echo "CONFIG_LOCALTIME_R=y" >> $config_host_mak
6644 fi
6645 if test "$qom_cast_debug" = "yes" ; then
6646   echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
6647 fi
6648 if test "$rbd" = "yes" ; then
6649   echo "CONFIG_RBD=m" >> $config_host_mak
6650   echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
6651   echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
6652 fi
6653
6654 echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
6655 if test "$coroutine_pool" = "yes" ; then
6656   echo "CONFIG_COROUTINE_POOL=1" >> $config_host_mak
6657 else
6658   echo "CONFIG_COROUTINE_POOL=0" >> $config_host_mak
6659 fi
6660
6661 if test "$debug_stack_usage" = "yes" ; then
6662   echo "CONFIG_DEBUG_STACK_USAGE=y" >> $config_host_mak
6663 fi
6664
6665 if test "$crypto_afalg" = "yes" ; then
6666   echo "CONFIG_AF_ALG=y" >> $config_host_mak
6667 fi
6668
6669 if test "$open_by_handle_at" = "yes" ; then
6670   echo "CONFIG_OPEN_BY_HANDLE=y" >> $config_host_mak
6671 fi
6672
6673 if test "$linux_magic_h" = "yes" ; then
6674   echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak
6675 fi
6676
6677 if test "$pragma_diagnostic_available" = "yes" ; then
6678   echo "CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE=y" >> $config_host_mak
6679 fi
6680
6681 if test "$valgrind_h" = "yes" ; then
6682   echo "CONFIG_VALGRIND_H=y" >> $config_host_mak
6683 fi
6684
6685 if test "$have_asan_iface_fiber" = "yes" ; then
6686     echo "CONFIG_ASAN_IFACE_FIBER=y" >> $config_host_mak
6687 fi
6688
6689 if test "$has_environ" = "yes" ; then
6690   echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
6691 fi
6692
6693 if test "$cpuid_h" = "yes" ; then
6694   echo "CONFIG_CPUID_H=y" >> $config_host_mak
6695 fi
6696
6697 if test "$int128" = "yes" ; then
6698   echo "CONFIG_INT128=y" >> $config_host_mak
6699 fi
6700
6701 if test "$atomic128" = "yes" ; then
6702   echo "CONFIG_ATOMIC128=y" >> $config_host_mak
6703 fi
6704
6705 if test "$atomic64" = "yes" ; then
6706   echo "CONFIG_ATOMIC64=y" >> $config_host_mak
6707 fi
6708
6709 if test "$vector16" = "yes" ; then
6710   echo "CONFIG_VECTOR16=y" >> $config_host_mak
6711 fi
6712
6713 if test "$getauxval" = "yes" ; then
6714   echo "CONFIG_GETAUXVAL=y" >> $config_host_mak
6715 fi
6716
6717 if test "$glusterfs" = "yes" ; then
6718   echo "CONFIG_GLUSTERFS=m" >> $config_host_mak
6719   echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak
6720   echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
6721 fi
6722
6723 if test "$glusterfs_xlator_opt" = "yes" ; then
6724   echo "CONFIG_GLUSTERFS_XLATOR_OPT=y" >> $config_host_mak
6725 fi
6726
6727 if test "$glusterfs_discard" = "yes" ; then
6728   echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
6729 fi
6730
6731 if test "$glusterfs_fallocate" = "yes" ; then
6732   echo "CONFIG_GLUSTERFS_FALLOCATE=y" >> $config_host_mak
6733 fi
6734
6735 if test "$glusterfs_zerofill" = "yes" ; then
6736   echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
6737 fi
6738
6739 if test "$libssh2" = "yes" ; then
6740   echo "CONFIG_LIBSSH2=m" >> $config_host_mak
6741   echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
6742   echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
6743 fi
6744
6745 if test "$live_block_migration" = "yes" ; then
6746   echo "CONFIG_LIVE_BLOCK_MIGRATION=y" >> $config_host_mak
6747 fi
6748
6749 if test "$tpm" = "yes"; then
6750   echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
6751   # TPM passthrough support?
6752   if test "$tpm_passthrough" = "yes"; then
6753     echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
6754   fi
6755   # TPM emulator support?
6756   if test "$tpm_emulator" = "yes"; then
6757     echo "CONFIG_TPM_EMULATOR=y" >> $config_host_mak
6758   fi
6759 fi
6760
6761 echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
6762 if have_backend "nop"; then
6763   echo "CONFIG_TRACE_NOP=y" >> $config_host_mak
6764 fi
6765 if have_backend "simple"; then
6766   echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak
6767   # Set the appropriate trace file.
6768   trace_file="\"$trace_file-\" FMT_pid"
6769 fi
6770 if have_backend "log"; then
6771   echo "CONFIG_TRACE_LOG=y" >> $config_host_mak
6772 fi
6773 if have_backend "ust"; then
6774   echo "CONFIG_TRACE_UST=y" >> $config_host_mak
6775 fi
6776 if have_backend "dtrace"; then
6777   echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak
6778   if test "$trace_backend_stap" = "yes" ; then
6779     echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak
6780   fi
6781 fi
6782 if have_backend "ftrace"; then
6783   if test "$linux" = "yes" ; then
6784     echo "CONFIG_TRACE_FTRACE=y" >> $config_host_mak
6785   else
6786     feature_not_found "ftrace(trace backend)" "ftrace requires Linux"
6787   fi
6788 fi
6789 if have_backend "syslog"; then
6790   if test "$posix_syslog" = "yes" ; then
6791     echo "CONFIG_TRACE_SYSLOG=y" >> $config_host_mak
6792   else
6793     feature_not_found "syslog(trace backend)" "syslog not available"
6794   fi
6795 fi
6796 echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
6797
6798 if test "$rdma" = "yes" ; then
6799   echo "CONFIG_RDMA=y" >> $config_host_mak
6800   echo "RDMA_LIBS=$rdma_libs" >> $config_host_mak
6801 fi
6802
6803 if test "$pvrdma" = "yes" ; then
6804   echo "CONFIG_PVRDMA=y" >> $config_host_mak
6805 fi
6806
6807 if test "$have_rtnetlink" = "yes" ; then
6808   echo "CONFIG_RTNETLINK=y" >> $config_host_mak
6809 fi
6810
6811 if test "$libxml2" = "yes" ; then
6812   echo "CONFIG_LIBXML2=y" >> $config_host_mak
6813   echo "LIBXML2_CFLAGS=$libxml2_cflags" >> $config_host_mak
6814   echo "LIBXML2_LIBS=$libxml2_libs" >> $config_host_mak
6815 fi
6816
6817 if test "$replication" = "yes" ; then
6818   echo "CONFIG_REPLICATION=y" >> $config_host_mak
6819 fi
6820
6821 if test "$have_af_vsock" = "yes" ; then
6822   echo "CONFIG_AF_VSOCK=y" >> $config_host_mak
6823 fi
6824
6825 if test "$have_sysmacros" = "yes" ; then
6826   echo "CONFIG_SYSMACROS=y" >> $config_host_mak
6827 fi
6828
6829 if test "$have_static_assert" = "yes" ; then
6830   echo "CONFIG_STATIC_ASSERT=y" >> $config_host_mak
6831 fi
6832
6833 if test "$have_utmpx" = "yes" ; then
6834   echo "HAVE_UTMPX=y" >> $config_host_mak
6835 fi
6836
6837 if test "$ivshmem" = "yes" ; then
6838   echo "CONFIG_IVSHMEM=y" >> $config_host_mak
6839 fi
6840 if test "$capstone" != "no" ; then
6841   echo "CONFIG_CAPSTONE=y" >> $config_host_mak
6842 fi
6843 if test "$debug_mutex" = "yes" ; then
6844   echo "CONFIG_DEBUG_MUTEX=y" >> $config_host_mak
6845 fi
6846
6847 # Hold two types of flag:
6848 #   CONFIG_THREAD_SETNAME_BYTHREAD  - we've got a way of setting the name on
6849 #                                     a thread we have a handle to
6850 #   CONFIG_PTHREAD_SETNAME_NP       - A way of doing it on a particular
6851 #                                     platform
6852 if test "$pthread_setname_np" = "yes" ; then
6853   echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak
6854   echo "CONFIG_PTHREAD_SETNAME_NP=y" >> $config_host_mak
6855 fi
6856
6857 if test "$vxhs" = "yes" ; then
6858   echo "CONFIG_VXHS=y" >> $config_host_mak
6859   echo "VXHS_LIBS=$vxhs_libs" >> $config_host_mak
6860 fi
6861
6862 if test "$libpmem" = "yes" ; then
6863   echo "CONFIG_LIBPMEM=y" >> $config_host_mak
6864 fi
6865
6866 if test "$tcg_interpreter" = "yes"; then
6867   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
6868 elif test "$ARCH" = "sparc64" ; then
6869   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/sparc $QEMU_INCLUDES"
6870 elif test "$ARCH" = "s390x" ; then
6871   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES"
6872 elif test "$ARCH" = "x86_64" -o "$ARCH" = "x32" ; then
6873   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES"
6874 elif test "$ARCH" = "ppc64" ; then
6875   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/ppc $QEMU_INCLUDES"
6876 else
6877   QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES"
6878 fi
6879 QEMU_INCLUDES="-iquote \$(SRC_PATH)/tcg $QEMU_INCLUDES"
6880
6881 echo "TOOLS=$tools" >> $config_host_mak
6882 echo "ROMS=$roms" >> $config_host_mak
6883 echo "MAKE=$make" >> $config_host_mak
6884 echo "INSTALL=$install" >> $config_host_mak
6885 echo "INSTALL_DIR=$install -d -m 0755" >> $config_host_mak
6886 echo "INSTALL_DATA=$install -c -m 0644" >> $config_host_mak
6887 echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak
6888 echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
6889 echo "PYTHON=$python" >> $config_host_mak
6890 echo "CC=$cc" >> $config_host_mak
6891 if $iasl -h > /dev/null 2>&1; then
6892   echo "IASL=$iasl" >> $config_host_mak
6893 fi
6894 echo "HOST_CC=$host_cc" >> $config_host_mak
6895 echo "CXX=$cxx" >> $config_host_mak
6896 echo "OBJCC=$objcc" >> $config_host_mak
6897 echo "AR=$ar" >> $config_host_mak
6898 echo "ARFLAGS=$ARFLAGS" >> $config_host_mak
6899 echo "AS=$as" >> $config_host_mak
6900 echo "CCAS=$ccas" >> $config_host_mak
6901 echo "CPP=$cpp" >> $config_host_mak
6902 echo "OBJCOPY=$objcopy" >> $config_host_mak
6903 echo "LD=$ld" >> $config_host_mak
6904 echo "RANLIB=$ranlib" >> $config_host_mak
6905 echo "NM=$nm" >> $config_host_mak
6906 echo "WINDRES=$windres" >> $config_host_mak
6907 echo "CFLAGS=$CFLAGS" >> $config_host_mak
6908 echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
6909 echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
6910 echo "QEMU_CXXFLAGS=$QEMU_CXXFLAGS" >> $config_host_mak
6911 echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
6912 if test "$sparse" = "yes" ; then
6913   echo "CC           := REAL_CC=\"\$(CC)\" cgcc"       >> $config_host_mak
6914   echo "CPP          := REAL_CC=\"\$(CPP)\" cgcc"      >> $config_host_mak
6915   echo "CXX          := REAL_CC=\"\$(CXX)\" cgcc"      >> $config_host_mak
6916   echo "HOST_CC      := REAL_CC=\"\$(HOST_CC)\" cgcc"  >> $config_host_mak
6917   echo "QEMU_CFLAGS  += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
6918 fi
6919 if test "$cross_prefix" != ""; then
6920   echo "AUTOCONF_HOST := --host=${cross_prefix%-}"     >> $config_host_mak
6921 else
6922   echo "AUTOCONF_HOST := "                             >> $config_host_mak
6923 fi
6924 echo "LDFLAGS=$LDFLAGS" >> $config_host_mak
6925 echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak
6926 echo "QEMU_LDFLAGS=$QEMU_LDFLAGS" >> $config_host_mak
6927 echo "LD_REL_FLAGS=$LD_REL_FLAGS" >> $config_host_mak
6928 echo "LD_I386_EMULATION=$ld_i386_emulation" >> $config_host_mak
6929 echo "LIBS+=$LIBS" >> $config_host_mak
6930 echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
6931 echo "PTHREAD_LIB=$PTHREAD_LIB" >> $config_host_mak
6932 echo "EXESUF=$EXESUF" >> $config_host_mak
6933 echo "DSOSUF=$DSOSUF" >> $config_host_mak
6934 echo "LDFLAGS_SHARED=$LDFLAGS_SHARED" >> $config_host_mak
6935 echo "LIBS_QGA+=$libs_qga" >> $config_host_mak
6936 echo "TASN1_LIBS=$tasn1_libs" >> $config_host_mak
6937 echo "TASN1_CFLAGS=$tasn1_cflags" >> $config_host_mak
6938 echo "POD2MAN=$POD2MAN" >> $config_host_mak
6939 echo "TRANSLATE_OPT_CFLAGS=$TRANSLATE_OPT_CFLAGS" >> $config_host_mak
6940 if test "$gcov" = "yes" ; then
6941   echo "CONFIG_GCOV=y" >> $config_host_mak
6942   echo "GCOV=$gcov_tool" >> $config_host_mak
6943 fi
6944
6945 if test "$docker" != "no"; then
6946     echo "HAVE_USER_DOCKER=y" >> $config_host_mak
6947 fi
6948
6949 # use included Linux headers
6950 if test "$linux" = "yes" ; then
6951   mkdir -p linux-headers
6952   case "$cpu" in
6953   i386|x86_64|x32)
6954     linux_arch=x86
6955     ;;
6956   ppc|ppc64)
6957     linux_arch=powerpc
6958     ;;
6959   s390x)
6960     linux_arch=s390
6961     ;;
6962   aarch64)
6963     linux_arch=arm64
6964     ;;
6965   mips64)
6966     linux_arch=mips
6967     ;;
6968   *)
6969     # For most CPUs the kernel architecture name and QEMU CPU name match.
6970     linux_arch="$cpu"
6971     ;;
6972   esac
6973     # For non-KVM architectures we will not have asm headers
6974     if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
6975       symlink "$source_path/linux-headers/asm-$linux_arch" linux-headers/asm
6976     fi
6977 fi
6978
6979 for target in $target_list; do
6980 target_dir="$target"
6981 config_target_mak=$target_dir/config-target.mak
6982 target_name=$(echo $target | cut -d '-' -f 1)
6983 target_bigendian="no"
6984
6985 case "$target_name" in
6986   armeb|aarch64_be|hppa|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or1k|ppc|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb)
6987   target_bigendian=yes
6988   ;;
6989 esac
6990 target_softmmu="no"
6991 target_user_only="no"
6992 target_linux_user="no"
6993 target_bsd_user="no"
6994 case "$target" in
6995   ${target_name}-softmmu)
6996     target_softmmu="yes"
6997     ;;
6998   ${target_name}-linux-user)
6999     target_user_only="yes"
7000     target_linux_user="yes"
7001     ;;
7002   ${target_name}-bsd-user)
7003     target_user_only="yes"
7004     target_bsd_user="yes"
7005     ;;
7006   *)
7007     error_exit "Target '$target' not recognised"
7008     exit 1
7009     ;;
7010 esac
7011
7012 target_compiler=""
7013 target_compiler_static=""
7014 target_compiler_cflags=""
7015
7016 mkdir -p $target_dir
7017 echo "# Automatically generated by configure - do not modify" > $config_target_mak
7018
7019 bflt="no"
7020 mttcg="no"
7021 interp_prefix1=$(echo "$interp_prefix" | sed "s/%M/$target_name/g")
7022 gdb_xml_files=""
7023
7024 TARGET_ARCH="$target_name"
7025 TARGET_BASE_ARCH=""
7026 TARGET_ABI_DIR=""
7027
7028 case "$target_name" in
7029   i386)
7030     mttcg="yes"
7031     gdb_xml_files="i386-32bit.xml i386-32bit-core.xml i386-32bit-sse.xml"
7032     target_compiler=$cross_cc_i386
7033     target_compiler_cflags=$cross_cc_ccflags_i386
7034   ;;
7035   x86_64)
7036     TARGET_BASE_ARCH=i386
7037     mttcg="yes"
7038     gdb_xml_files="i386-64bit.xml i386-64bit-core.xml i386-64bit-sse.xml"
7039     target_compiler=$cross_cc_x86_64
7040   ;;
7041   alpha)
7042     mttcg="yes"
7043     target_compiler=$cross_cc_alpha
7044   ;;
7045   arm|armeb)
7046     TARGET_ARCH=arm
7047     bflt="yes"
7048     mttcg="yes"
7049     gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
7050     target_compiler=$cross_cc_arm
7051     eval "target_compiler_cflags=\$cross_cc_cflags_${target_name}"
7052   ;;
7053   aarch64|aarch64_be)
7054     TARGET_ARCH=aarch64
7055     TARGET_BASE_ARCH=arm
7056     bflt="yes"
7057     mttcg="yes"
7058     gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
7059     target_compiler=$cross_cc_aarch64
7060     eval "target_compiler_cflags=\$cross_cc_cflags_${target_name}"
7061   ;;
7062   cris)
7063     target_compiler=$cross_cc_cris
7064   ;;
7065   hppa)
7066     mttcg="yes"
7067     target_compiler=$cross_cc_hppa
7068   ;;
7069   lm32)
7070     target_compiler=$cross_cc_lm32
7071   ;;
7072   m68k)
7073     bflt="yes"
7074     gdb_xml_files="cf-core.xml cf-fp.xml m68k-fp.xml"
7075     target_compiler=$cross_cc_m68k
7076   ;;
7077   microblaze|microblazeel)
7078     TARGET_ARCH=microblaze
7079     bflt="yes"
7080     echo "TARGET_ABI32=y" >> $config_target_mak
7081     target_compiler=$cross_cc_microblaze
7082   ;;
7083   mips|mipsel)
7084     TARGET_ARCH=mips
7085     target_compiler=$cross_cc_mips
7086     echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
7087   ;;
7088   mipsn32|mipsn32el)
7089     TARGET_ARCH=mips64
7090     TARGET_BASE_ARCH=mips
7091     target_compiler=$cross_cc_mipsn32
7092     echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
7093     echo "TARGET_ABI32=y" >> $config_target_mak
7094   ;;
7095   mips64|mips64el)
7096     TARGET_ARCH=mips64
7097     TARGET_BASE_ARCH=mips
7098     target_compiler=$cross_cc_mips64
7099     echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
7100   ;;
7101   moxie)
7102     target_compiler=$cross_cc_moxie
7103   ;;
7104   nios2)
7105     target_compiler=$cross_cc_nios2
7106   ;;
7107   or1k)
7108     target_compiler=$cross_cc_or1k
7109     TARGET_ARCH=openrisc
7110     TARGET_BASE_ARCH=openrisc
7111   ;;
7112   ppc)
7113     gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
7114     target_compiler=$cross_cc_powerpc
7115   ;;
7116   ppc64)
7117     TARGET_BASE_ARCH=ppc
7118     TARGET_ABI_DIR=ppc
7119     mttcg=yes
7120     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
7121     target_compiler=$cross_cc_ppc64
7122   ;;
7123   ppc64le)
7124     TARGET_ARCH=ppc64
7125     TARGET_BASE_ARCH=ppc
7126     TARGET_ABI_DIR=ppc
7127     mttcg=yes
7128     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
7129     target_compiler=$cross_cc_ppc64le
7130   ;;
7131   ppc64abi32)
7132     TARGET_ARCH=ppc64
7133     TARGET_BASE_ARCH=ppc
7134     TARGET_ABI_DIR=ppc
7135     echo "TARGET_ABI32=y" >> $config_target_mak
7136     gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml power-vsx.xml"
7137     target_compiler=$cross_cc_ppc64abi32
7138   ;;
7139   riscv32)
7140     TARGET_BASE_ARCH=riscv
7141     TARGET_ABI_DIR=riscv
7142     mttcg=yes
7143     target_compiler=$cross_cc_riscv32
7144   ;;
7145   riscv64)
7146     TARGET_BASE_ARCH=riscv
7147     TARGET_ABI_DIR=riscv
7148     mttcg=yes
7149     target_compiler=$cross_cc_riscv64
7150   ;;
7151   sh4|sh4eb)
7152     TARGET_ARCH=sh4
7153     bflt="yes"
7154     target_compiler=$cross_cc_sh4
7155   ;;
7156   sparc)
7157     target_compiler=$cross_cc_sparc
7158   ;;
7159   sparc64)
7160     TARGET_BASE_ARCH=sparc
7161     target_compiler=$cross_cc_sparc64
7162   ;;
7163   sparc32plus)
7164     TARGET_ARCH=sparc64
7165     TARGET_BASE_ARCH=sparc
7166     TARGET_ABI_DIR=sparc
7167     target_compiler=$cross_cc_sparc32plus
7168     echo "TARGET_ABI32=y" >> $config_target_mak
7169   ;;
7170   s390x)
7171     mttcg=yes
7172     gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml s390-vx.xml s390-cr.xml s390-virt.xml s390-gs.xml"
7173     target_compiler=$cross_cc_s390x
7174   ;;
7175   tilegx)
7176     target_compiler=$cross_cc_tilegx
7177   ;;
7178   tricore)
7179     target_compiler=$cross_cc_tricore
7180   ;;
7181   unicore32)
7182     target_compiler=$cross_cc_unicore32
7183   ;;
7184   xtensa|xtensaeb)
7185     TARGET_ARCH=xtensa
7186     mttcg="yes"
7187     target_compiler=$cross_cc_xtensa
7188   ;;
7189   *)
7190     error_exit "Unsupported target CPU"
7191   ;;
7192 esac
7193 # TARGET_BASE_ARCH needs to be defined after TARGET_ARCH
7194 if [ "$TARGET_BASE_ARCH" = "" ]; then
7195   TARGET_BASE_ARCH=$TARGET_ARCH
7196 fi
7197
7198 # Do we have a cross compiler for this target?
7199 if has $target_compiler; then
7200
7201     write_c_skeleton
7202
7203     if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC -static ; then
7204         # For host systems we might get away with building without -static
7205         if ! do_compiler "$target_compiler" $target_compiler_cflags -o $TMPE $TMPC ; then
7206             target_compiler=""
7207         else
7208             enabled_cross_compilers="${enabled_cross_compilers} '${target_compiler}'"
7209             target_compiler_static="n"
7210         fi
7211     else
7212         enabled_cross_compilers="${enabled_cross_compilers} '${target_compiler}'"
7213         target_compiler_static="y"
7214     fi
7215 else
7216     target_compiler=""
7217 fi
7218
7219 symlink "$source_path/Makefile.target" "$target_dir/Makefile"
7220
7221 upper() {
7222     echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]'
7223 }
7224
7225 target_arch_name="$(upper $TARGET_ARCH)"
7226 echo "TARGET_$target_arch_name=y" >> $config_target_mak
7227 echo "TARGET_NAME=$target_name" >> $config_target_mak
7228 echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
7229 if [ "$TARGET_ABI_DIR" = "" ]; then
7230   TARGET_ABI_DIR=$TARGET_ARCH
7231 fi
7232 echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
7233 if [ "$HOST_VARIANT_DIR" != "" ]; then
7234     echo "HOST_VARIANT_DIR=$HOST_VARIANT_DIR" >> $config_target_mak
7235 fi
7236
7237 if supported_xen_target $target; then
7238     echo "CONFIG_XEN=y" >> $config_target_mak
7239     if test "$xen_pci_passthrough" = yes; then
7240         echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
7241     fi
7242 fi
7243 if supported_kvm_target $target; then
7244     echo "CONFIG_KVM=y" >> $config_target_mak
7245     if test "$vhost_net" = "yes" ; then
7246         echo "CONFIG_VHOST_NET=y" >> $config_target_mak
7247         if test "$vhost_user" = "yes" ; then
7248             echo "CONFIG_VHOST_USER_NET_TEST_$target_name=y" >> $config_host_mak
7249         fi
7250     fi
7251 fi
7252 if supported_hax_target $target; then
7253     echo "CONFIG_HAX=y" >> $config_target_mak
7254 fi
7255 if supported_hvf_target $target; then
7256     echo "CONFIG_HVF=y" >> $config_target_mak
7257 fi
7258 if supported_whpx_target $target; then
7259     echo "CONFIG_WHPX=y" >> $config_target_mak
7260 fi
7261 if test "$target_bigendian" = "yes" ; then
7262   echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
7263 fi
7264 if test "$target_softmmu" = "yes" ; then
7265   echo "CONFIG_SOFTMMU=y" >> $config_target_mak
7266   if test "$mttcg" = "yes" ; then
7267     echo "TARGET_SUPPORTS_MTTCG=y" >> $config_target_mak
7268   fi
7269 fi
7270 if test "$target_user_only" = "yes" ; then
7271   echo "CONFIG_USER_ONLY=y" >> $config_target_mak
7272   echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak
7273 fi
7274 if test "$target_linux_user" = "yes" ; then
7275   echo "CONFIG_LINUX_USER=y" >> $config_target_mak
7276 fi
7277 list=""
7278 if test ! -z "$gdb_xml_files" ; then
7279   for x in $gdb_xml_files; do
7280     list="$list $source_path/gdb-xml/$x"
7281   done
7282   echo "TARGET_XML_FILES=$list" >> $config_target_mak
7283 fi
7284
7285 if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then
7286   echo "TARGET_HAS_BFLT=y" >> $config_target_mak
7287 fi
7288 if test "$target_bsd_user" = "yes" ; then
7289   echo "CONFIG_BSD_USER=y" >> $config_target_mak
7290 fi
7291
7292 if test -n "$target_compiler"; then
7293   echo "CROSS_CC_GUEST=\"$target_compiler\"" >> $config_target_mak
7294
7295   if test -n "$target_compiler_static"; then
7296       echo "CROSS_CC_GUEST_STATIC=$target_compiler_static" >> $config_target_mak
7297   fi
7298
7299   if test -n "$target_compiler_cflags"; then
7300       echo "CROSS_CC_GUEST_CFLAGS=$target_compiler_cflags" >> $config_target_mak
7301   fi
7302 fi
7303
7304
7305 # generate QEMU_CFLAGS/LDFLAGS for targets
7306
7307 cflags=""
7308 ldflags=""
7309
7310 disas_config() {
7311   echo "CONFIG_${1}_DIS=y" >> $config_target_mak
7312   echo "CONFIG_${1}_DIS=y" >> config-all-disas.mak
7313 }
7314
7315 for i in $ARCH $TARGET_BASE_ARCH ; do
7316   case "$i" in
7317   alpha)
7318     disas_config "ALPHA"
7319   ;;
7320   aarch64)
7321     if test -n "${cxx}"; then
7322       disas_config "ARM_A64"
7323     fi
7324   ;;
7325   arm)
7326     disas_config "ARM"
7327     if test -n "${cxx}"; then
7328       disas_config "ARM_A64"
7329     fi
7330   ;;
7331   cris)
7332     disas_config "CRIS"
7333   ;;
7334   hppa)
7335     disas_config "HPPA"
7336   ;;
7337   i386|x86_64|x32)
7338     disas_config "I386"
7339   ;;
7340   lm32)
7341     disas_config "LM32"
7342   ;;
7343   m68k)
7344     disas_config "M68K"
7345   ;;
7346   microblaze*)
7347     disas_config "MICROBLAZE"
7348   ;;
7349   mips*)
7350     disas_config "MIPS"
7351   ;;
7352   moxie*)
7353     disas_config "MOXIE"
7354   ;;
7355   nios2)
7356     disas_config "NIOS2"
7357   ;;
7358   or1k)
7359     disas_config "OPENRISC"
7360   ;;
7361   ppc*)
7362     disas_config "PPC"
7363   ;;
7364   riscv)
7365     disas_config "RISCV"
7366   ;;
7367   s390*)
7368     disas_config "S390"
7369   ;;
7370   sh4)
7371     disas_config "SH4"
7372   ;;
7373   sparc*)
7374     disas_config "SPARC"
7375   ;;
7376   xtensa*)
7377     disas_config "XTENSA"
7378   ;;
7379   esac
7380 done
7381 if test "$tcg_interpreter" = "yes" ; then
7382   disas_config "TCI"
7383 fi
7384
7385 case "$ARCH" in
7386 alpha)
7387   # Ensure there's only a single GP
7388   cflags="-msmall-data $cflags"
7389 ;;
7390 esac
7391
7392 if test "$gprof" = "yes" ; then
7393   echo "TARGET_GPROF=yes" >> $config_target_mak
7394   if test "$target_linux_user" = "yes" ; then
7395     cflags="-p $cflags"
7396     ldflags="-p $ldflags"
7397   fi
7398   if test "$target_softmmu" = "yes" ; then
7399     ldflags="-p $ldflags"
7400     echo "GPROF_CFLAGS=-p" >> $config_target_mak
7401   fi
7402 fi
7403
7404 if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
7405   ldflags="$ldflags $textseg_ldflags"
7406 fi
7407
7408 # Newer kernels on s390 check for an S390_PGSTE program header and
7409 # enable the pgste page table extensions in that case. This makes
7410 # the vm.allocate_pgste sysctl unnecessary. We enable this program
7411 # header if
7412 #  - we build on s390x
7413 #  - we build the system emulation for s390x (qemu-system-s390x)
7414 #  - KVM is enabled
7415 #  - the linker supports --s390-pgste
7416 if test "$TARGET_ARCH" = "s390x" -a "$target_softmmu" = "yes"  -a "$ARCH" = "s390x" -a "$kvm" = "yes"; then
7417     if ld_has --s390-pgste ; then
7418         ldflags="-Wl,--s390-pgste $ldflags"
7419     fi
7420 fi
7421
7422 echo "LDFLAGS+=$ldflags" >> $config_target_mak
7423 echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
7424
7425 done # for target in $targets
7426
7427 if test -n "$enabled_cross_compilers"; then
7428     echo
7429     echo "NOTE: cross-compilers enabled: $enabled_cross_compilers"
7430 fi
7431
7432 if [ "$fdt" = "git" ]; then
7433   echo "config-host.h: subdir-dtc" >> $config_host_mak
7434 fi
7435 if [ "$capstone" = "git" -o "$capstone" = "internal" ]; then
7436   echo "config-host.h: subdir-capstone" >> $config_host_mak
7437 fi
7438 if test -n "$LIBCAPSTONE"; then
7439   echo "LIBCAPSTONE=$LIBCAPSTONE" >> $config_host_mak
7440 fi
7441
7442 if test "$numa" = "yes"; then
7443   echo "CONFIG_NUMA=y" >> $config_host_mak
7444 fi
7445
7446 if test "$ccache_cpp2" = "yes"; then
7447   echo "export CCACHE_CPP2=y" >> $config_host_mak
7448 fi
7449
7450 # build tree in object directory in case the source is not in the current directory
7451 DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests tests/vm"
7452 DIRS="$DIRS docs docs/interop fsdev scsi"
7453 DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
7454 DIRS="$DIRS roms/seabios roms/vgabios"
7455 FILES="Makefile tests/tcg/Makefile qdict-test-data.txt"
7456 FILES="$FILES tests/tcg/cris/Makefile tests/tcg/cris/.gdbinit"
7457 FILES="$FILES tests/tcg/lm32/Makefile tests/tcg/xtensa/Makefile po/Makefile"
7458 FILES="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps"
7459 FILES="$FILES pc-bios/spapr-rtas/Makefile"
7460 FILES="$FILES pc-bios/s390-ccw/Makefile"
7461 FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
7462 FILES="$FILES pc-bios/qemu-icon.bmp"
7463 FILES="$FILES .gdbinit scripts" # scripts needed by relative path in .gdbinit
7464 for bios_file in \
7465     $source_path/pc-bios/*.bin \
7466     $source_path/pc-bios/*.lid \
7467     $source_path/pc-bios/*.aml \
7468     $source_path/pc-bios/*.rom \
7469     $source_path/pc-bios/*.dtb \
7470     $source_path/pc-bios/*.img \
7471     $source_path/pc-bios/openbios-* \
7472     $source_path/pc-bios/u-boot.* \
7473     $source_path/pc-bios/palcode-*
7474 do
7475     FILES="$FILES pc-bios/$(basename $bios_file)"
7476 done
7477 for test_file in $(find $source_path/tests/acpi-test-data -type f)
7478 do
7479     FILES="$FILES tests/acpi-test-data$(echo $test_file | sed -e 's/.*acpi-test-data//')"
7480 done
7481 for test_file in $(find $source_path/tests/hex-loader-check-data -type f)
7482 do
7483     FILES="$FILES tests/hex-loader-check-data$(echo $test_file | sed -e 's/.*hex-loader-check-data//')"
7484 done
7485 mkdir -p $DIRS
7486 for f in $FILES ; do
7487     if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then
7488         symlink "$source_path/$f" "$f"
7489     fi
7490 done
7491
7492 # temporary config to build submodules
7493 for rom in seabios vgabios ; do
7494     config_mak=roms/$rom/config.mak
7495     echo "# Automatically generated by configure - do not modify" > $config_mak
7496     echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak
7497     echo "AS=$as" >> $config_mak
7498     echo "CCAS=$ccas" >> $config_mak
7499     echo "CC=$cc" >> $config_mak
7500     echo "BCC=bcc" >> $config_mak
7501     echo "CPP=$cpp" >> $config_mak
7502     echo "OBJCOPY=objcopy" >> $config_mak
7503     echo "IASL=$iasl" >> $config_mak
7504     echo "LD=$ld" >> $config_mak
7505     echo "RANLIB=$ranlib" >> $config_mak
7506 done
7507
7508 # set up tests data directory
7509 for tests_subdir in acceptance data; do
7510     if [ ! -e tests/$tests_subdir ]; then
7511         symlink "$source_path/tests/$tests_subdir" tests/$tests_subdir
7512     fi
7513 done
7514
7515 # set up qemu-iotests in this build directory
7516 iotests_common_env="tests/qemu-iotests/common.env"
7517 iotests_check="tests/qemu-iotests/check"
7518
7519 echo "# Automatically generated by configure - do not modify" > "$iotests_common_env"
7520 echo >> "$iotests_common_env"
7521 echo "export PYTHON='$python'" >> "$iotests_common_env"
7522
7523 if [ ! -e "$iotests_check" ]; then
7524     symlink "$source_path/$iotests_check" "$iotests_check"
7525 fi
7526
7527 # Save the configure command line for later reuse.
7528 cat <<EOD >config.status
7529 #!/bin/sh
7530 # Generated by configure.
7531 # Run this file to recreate the current configuration.
7532 # Compiler output produced by configure, useful for debugging
7533 # configure, is in config.log if it exists.
7534 EOD
7535
7536 preserve_env() {
7537     envname=$1
7538
7539     eval envval=\$$envname
7540
7541     if test -n "$envval"
7542     then
7543         echo "$envname='$envval'" >> config.status
7544         echo "export $envname" >> config.status
7545     else
7546         echo "unset $envname" >> config.status
7547     fi
7548 }
7549
7550 # Preserve various env variables that influence what
7551 # features/build target configure will detect
7552 preserve_env AR
7553 preserve_env AS
7554 preserve_env CC
7555 preserve_env CPP
7556 preserve_env CXX
7557 preserve_env INSTALL
7558 preserve_env LD
7559 preserve_env LD_LIBRARY_PATH
7560 preserve_env LIBTOOL
7561 preserve_env MAKE
7562 preserve_env NM
7563 preserve_env OBJCOPY
7564 preserve_env PATH
7565 preserve_env PKG_CONFIG
7566 preserve_env PKG_CONFIG_LIBDIR
7567 preserve_env PKG_CONFIG_PATH
7568 preserve_env PYTHON
7569 preserve_env SDL_CONFIG
7570 preserve_env SDL2_CONFIG
7571 preserve_env SMBD
7572 preserve_env STRIP
7573 preserve_env WINDRES
7574
7575 printf "exec" >>config.status
7576 printf " '%s'" "$0" "$@" >>config.status
7577 echo ' "$@"' >>config.status
7578 chmod +x config.status
7579
7580 rm -r "$TMPDIR1"