2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
55 BDRV_REQ_COPY_ON_READ = 0x1,
56 BDRV_REQ_ZERO_WRITE = 0x2,
59 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
60 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
61 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
62 BlockDriverCompletionFunc *cb, void *opaque);
63 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
64 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
65 BlockDriverCompletionFunc *cb, void *opaque);
66 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
67 int64_t sector_num, int nb_sectors,
69 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
70 int64_t sector_num, int nb_sectors,
72 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
73 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
74 BdrvRequestFlags flags);
75 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
76 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
77 BdrvRequestFlags flags);
78 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
82 BlockDriverCompletionFunc *cb,
85 static void coroutine_fn bdrv_co_do_rw(void *opaque);
86 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
87 int64_t sector_num, int nb_sectors);
89 static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
90 bool is_write, double elapsed_time, uint64_t *wait);
91 static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
92 double elapsed_time, uint64_t *wait);
93 static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
94 bool is_write, int64_t *wait);
96 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
97 QTAILQ_HEAD_INITIALIZER(bdrv_states);
99 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
100 QLIST_HEAD_INITIALIZER(bdrv_drivers);
102 /* If non-zero, use only whitelisted block drivers */
103 static int use_bdrv_whitelist;
106 static int is_windows_drive_prefix(const char *filename)
108 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
109 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
113 int is_windows_drive(const char *filename)
115 if (is_windows_drive_prefix(filename) &&
118 if (strstart(filename, "\\\\.\\", NULL) ||
119 strstart(filename, "//./", NULL))
125 /* throttling disk I/O limits */
126 void bdrv_io_limits_disable(BlockDriverState *bs)
128 bs->io_limits_enabled = false;
130 while (qemu_co_queue_next(&bs->throttled_reqs));
132 if (bs->block_timer) {
133 qemu_del_timer(bs->block_timer);
134 qemu_free_timer(bs->block_timer);
135 bs->block_timer = NULL;
142 static void bdrv_block_timer(void *opaque)
144 BlockDriverState *bs = opaque;
146 qemu_co_queue_next(&bs->throttled_reqs);
149 void bdrv_io_limits_enable(BlockDriverState *bs)
151 qemu_co_queue_init(&bs->throttled_reqs);
152 bs->block_timer = qemu_new_timer_ns(vm_clock, bdrv_block_timer, bs);
153 bs->io_limits_enabled = true;
156 bool bdrv_io_limits_enabled(BlockDriverState *bs)
158 BlockIOLimit *io_limits = &bs->io_limits;
159 return io_limits->bps[BLOCK_IO_LIMIT_READ]
160 || io_limits->bps[BLOCK_IO_LIMIT_WRITE]
161 || io_limits->bps[BLOCK_IO_LIMIT_TOTAL]
162 || io_limits->iops[BLOCK_IO_LIMIT_READ]
163 || io_limits->iops[BLOCK_IO_LIMIT_WRITE]
164 || io_limits->iops[BLOCK_IO_LIMIT_TOTAL];
167 static void bdrv_io_limits_intercept(BlockDriverState *bs,
168 bool is_write, int nb_sectors)
170 int64_t wait_time = -1;
172 if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
173 qemu_co_queue_wait(&bs->throttled_reqs);
176 /* In fact, we hope to keep each request's timing, in FIFO mode. The next
177 * throttled requests will not be dequeued until the current request is
178 * allowed to be serviced. So if the current request still exceeds the
179 * limits, it will be inserted to the head. All requests followed it will
180 * be still in throttled_reqs queue.
183 while (bdrv_exceed_io_limits(bs, nb_sectors, is_write, &wait_time)) {
184 qemu_mod_timer(bs->block_timer,
185 wait_time + qemu_get_clock_ns(vm_clock));
186 qemu_co_queue_wait_insert_head(&bs->throttled_reqs);
189 qemu_co_queue_next(&bs->throttled_reqs);
192 /* check if the path starts with "<protocol>:" */
193 static int path_has_protocol(const char *path)
198 if (is_windows_drive(path) ||
199 is_windows_drive_prefix(path)) {
202 p = path + strcspn(path, ":/\\");
204 p = path + strcspn(path, ":/");
210 int path_is_absolute(const char *path)
213 /* specific case for names like: "\\.\d:" */
214 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
217 return (*path == '/' || *path == '\\');
219 return (*path == '/');
223 /* if filename is absolute, just copy it to dest. Otherwise, build a
224 path to it by considering it is relative to base_path. URL are
226 void path_combine(char *dest, int dest_size,
227 const char *base_path,
228 const char *filename)
235 if (path_is_absolute(filename)) {
236 pstrcpy(dest, dest_size, filename);
238 p = strchr(base_path, ':');
243 p1 = strrchr(base_path, '/');
247 p2 = strrchr(base_path, '\\');
259 if (len > dest_size - 1)
261 memcpy(dest, base_path, len);
263 pstrcat(dest, dest_size, filename);
267 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
269 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
270 pstrcpy(dest, sz, bs->backing_file);
272 path_combine(dest, sz, bs->filename, bs->backing_file);
276 void bdrv_register(BlockDriver *bdrv)
278 /* Block drivers without coroutine functions need emulation */
279 if (!bdrv->bdrv_co_readv) {
280 bdrv->bdrv_co_readv = bdrv_co_readv_em;
281 bdrv->bdrv_co_writev = bdrv_co_writev_em;
283 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
284 * the block driver lacks aio we need to emulate that too.
286 if (!bdrv->bdrv_aio_readv) {
287 /* add AIO emulation layer */
288 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
289 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
293 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
296 /* create a new block device (by default it is empty) */
297 BlockDriverState *bdrv_new(const char *device_name)
299 BlockDriverState *bs;
301 bs = g_malloc0(sizeof(BlockDriverState));
302 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
303 if (device_name[0] != '\0') {
304 QTAILQ_INSERT_TAIL(&bdrv_states, bs, list);
306 bdrv_iostatus_disable(bs);
307 notifier_list_init(&bs->close_notifiers);
308 notifier_with_return_list_init(&bs->before_write_notifiers);
313 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
315 notifier_list_add(&bs->close_notifiers, notify);
318 BlockDriver *bdrv_find_format(const char *format_name)
321 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
322 if (!strcmp(drv1->format_name, format_name)) {
329 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
331 static const char *whitelist_rw[] = {
332 CONFIG_BDRV_RW_WHITELIST
334 static const char *whitelist_ro[] = {
335 CONFIG_BDRV_RO_WHITELIST
339 if (!whitelist_rw[0] && !whitelist_ro[0]) {
340 return 1; /* no whitelist, anything goes */
343 for (p = whitelist_rw; *p; p++) {
344 if (!strcmp(drv->format_name, *p)) {
349 for (p = whitelist_ro; *p; p++) {
350 if (!strcmp(drv->format_name, *p)) {
358 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
361 BlockDriver *drv = bdrv_find_format(format_name);
362 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
365 typedef struct CreateCo {
368 QEMUOptionParameter *options;
372 static void coroutine_fn bdrv_create_co_entry(void *opaque)
374 CreateCo *cco = opaque;
377 cco->ret = cco->drv->bdrv_create(cco->filename, cco->options);
380 int bdrv_create(BlockDriver *drv, const char* filename,
381 QEMUOptionParameter *options)
388 .filename = g_strdup(filename),
393 if (!drv->bdrv_create) {
398 if (qemu_in_coroutine()) {
399 /* Fast-path if already in coroutine context */
400 bdrv_create_co_entry(&cco);
402 co = qemu_coroutine_create(bdrv_create_co_entry);
403 qemu_coroutine_enter(co, &cco);
404 while (cco.ret == NOT_DONE) {
412 g_free(cco.filename);
416 int bdrv_create_file(const char* filename, QEMUOptionParameter *options)
420 drv = bdrv_find_protocol(filename);
425 return bdrv_create(drv, filename, options);
429 * Create a uniquely-named empty temporary file.
430 * Return 0 upon success, otherwise a negative errno value.
432 int get_tmp_filename(char *filename, int size)
435 char temp_dir[MAX_PATH];
436 /* GetTempFileName requires that its output buffer (4th param)
437 have length MAX_PATH or greater. */
438 assert(size >= MAX_PATH);
439 return (GetTempPath(MAX_PATH, temp_dir)
440 && GetTempFileName(temp_dir, "qem", 0, filename)
441 ? 0 : -GetLastError());
445 tmpdir = getenv("TMPDIR");
448 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
451 fd = mkstemp(filename);
455 if (close(fd) != 0) {
464 * Detect host devices. By convention, /dev/cdrom[N] is always
465 * recognized as a host CDROM.
467 static BlockDriver *find_hdev_driver(const char *filename)
469 int score_max = 0, score;
470 BlockDriver *drv = NULL, *d;
472 QLIST_FOREACH(d, &bdrv_drivers, list) {
473 if (d->bdrv_probe_device) {
474 score = d->bdrv_probe_device(filename);
475 if (score > score_max) {
485 BlockDriver *bdrv_find_protocol(const char *filename)
492 /* TODO Drivers without bdrv_file_open must be specified explicitly */
495 * XXX(hch): we really should not let host device detection
496 * override an explicit protocol specification, but moving this
497 * later breaks access to device names with colons in them.
498 * Thanks to the brain-dead persistent naming schemes on udev-
499 * based Linux systems those actually are quite common.
501 drv1 = find_hdev_driver(filename);
506 if (!path_has_protocol(filename)) {
507 return bdrv_find_format("file");
509 p = strchr(filename, ':');
512 if (len > sizeof(protocol) - 1)
513 len = sizeof(protocol) - 1;
514 memcpy(protocol, filename, len);
515 protocol[len] = '\0';
516 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
517 if (drv1->protocol_name &&
518 !strcmp(drv1->protocol_name, protocol)) {
525 static int find_image_format(BlockDriverState *bs, const char *filename,
528 int score, score_max;
529 BlockDriver *drv1, *drv;
533 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
534 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
535 drv = bdrv_find_format("raw");
543 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
551 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
552 if (drv1->bdrv_probe) {
553 score = drv1->bdrv_probe(buf, ret, filename);
554 if (score > score_max) {
568 * Set the current 'total_sectors' value
570 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
572 BlockDriver *drv = bs->drv;
574 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
578 /* query actual device if possible, otherwise just trust the hint */
579 if (drv->bdrv_getlength) {
580 int64_t length = drv->bdrv_getlength(bs);
584 hint = length >> BDRV_SECTOR_BITS;
587 bs->total_sectors = hint;
592 * Set open flags for a given discard mode
594 * Return 0 on success, -1 if the discard mode was invalid.
596 int bdrv_parse_discard_flags(const char *mode, int *flags)
598 *flags &= ~BDRV_O_UNMAP;
600 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
602 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
603 *flags |= BDRV_O_UNMAP;
612 * Set open flags for a given cache mode
614 * Return 0 on success, -1 if the cache mode was invalid.
616 int bdrv_parse_cache_flags(const char *mode, int *flags)
618 *flags &= ~BDRV_O_CACHE_MASK;
620 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
621 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
622 } else if (!strcmp(mode, "directsync")) {
623 *flags |= BDRV_O_NOCACHE;
624 } else if (!strcmp(mode, "writeback")) {
625 *flags |= BDRV_O_CACHE_WB;
626 } else if (!strcmp(mode, "unsafe")) {
627 *flags |= BDRV_O_CACHE_WB;
628 *flags |= BDRV_O_NO_FLUSH;
629 } else if (!strcmp(mode, "writethrough")) {
630 /* this is the default */
639 * The copy-on-read flag is actually a reference count so multiple users may
640 * use the feature without worrying about clobbering its previous state.
641 * Copy-on-read stays enabled until all users have called to disable it.
643 void bdrv_enable_copy_on_read(BlockDriverState *bs)
648 void bdrv_disable_copy_on_read(BlockDriverState *bs)
650 assert(bs->copy_on_read > 0);
654 static int bdrv_open_flags(BlockDriverState *bs, int flags)
656 int open_flags = flags | BDRV_O_CACHE_WB;
659 * Clear flags that are internal to the block layer before opening the
662 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
665 * Snapshots should be writable.
667 if (bs->is_temporary) {
668 open_flags |= BDRV_O_RDWR;
675 * Common part for opening disk images and files
677 * Removes all processed options from *options.
679 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
680 QDict *options, int flags, BlockDriver *drv)
683 const char *filename;
686 assert(bs->file == NULL);
687 assert(options != NULL && bs->options != options);
690 filename = file->filename;
692 filename = qdict_get_try_str(options, "filename");
695 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
697 /* bdrv_open() with directly using a protocol as drv. This layer is already
698 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
699 * and return immediately. */
700 if (file != NULL && drv->bdrv_file_open) {
705 bs->open_flags = flags;
706 bs->buffer_alignment = 512;
707 open_flags = bdrv_open_flags(bs, flags);
708 bs->read_only = !(open_flags & BDRV_O_RDWR);
710 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
714 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
715 if (!bs->read_only && (flags & BDRV_O_COPY_ON_READ)) {
716 bdrv_enable_copy_on_read(bs);
719 if (filename != NULL) {
720 pstrcpy(bs->filename, sizeof(bs->filename), filename);
722 bs->filename[0] = '\0';
726 bs->opaque = g_malloc0(drv->instance_size);
728 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
730 /* Open the image, either directly or using a protocol */
731 if (drv->bdrv_file_open) {
732 assert(file == NULL);
733 assert(drv->bdrv_parse_filename || filename != NULL);
734 ret = drv->bdrv_file_open(bs, options, open_flags);
737 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't use '%s' as a "
738 "block driver for the protocol level",
743 assert(file != NULL);
745 ret = drv->bdrv_open(bs, options, open_flags);
752 ret = refresh_total_sectors(bs, bs->total_sectors);
758 if (bs->is_temporary) {
759 assert(filename != NULL);
774 * Opens a file using a protocol (file, host_device, nbd, ...)
776 * options is a QDict of options to pass to the block drivers, or NULL for an
777 * empty set of options. The reference to the QDict belongs to the block layer
778 * after the call (even on failure), so if the caller intends to reuse the
779 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
781 int bdrv_file_open(BlockDriverState **pbs, const char *filename,
782 QDict *options, int flags)
784 BlockDriverState *bs;
789 /* NULL means an empty set of options */
790 if (options == NULL) {
791 options = qdict_new();
795 bs->options = options;
796 options = qdict_clone_shallow(options);
798 /* Fetch the file name from the options QDict if necessary */
800 filename = qdict_get_try_str(options, "filename");
801 } else if (filename && !qdict_haskey(options, "filename")) {
802 qdict_put(options, "filename", qstring_from_str(filename));
804 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't specify 'file' and "
805 "'filename' options at the same time");
810 /* Find the right block driver */
811 drvname = qdict_get_try_str(options, "driver");
813 drv = bdrv_find_whitelisted_format(drvname, !(flags & BDRV_O_RDWR));
814 qdict_del(options, "driver");
815 } else if (filename) {
816 drv = bdrv_find_protocol(filename);
818 qerror_report(ERROR_CLASS_GENERIC_ERROR,
819 "Must specify either driver or file");
828 /* Parse the filename and open it */
829 if (drv->bdrv_parse_filename && filename) {
830 Error *local_err = NULL;
831 drv->bdrv_parse_filename(filename, options, &local_err);
832 if (error_is_set(&local_err)) {
833 qerror_report_err(local_err);
834 error_free(local_err);
838 qdict_del(options, "filename");
839 } else if (!drv->bdrv_parse_filename && !filename) {
840 qerror_report(ERROR_CLASS_GENERIC_ERROR,
841 "The '%s' block driver requires a file name",
847 ret = bdrv_open_common(bs, NULL, options, flags, drv);
852 /* Check if any unknown options were used */
853 if (qdict_size(options) != 0) {
854 const QDictEntry *entry = qdict_first(options);
855 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block protocol '%s' doesn't "
856 "support the option '%s'",
857 drv->format_name, entry->key);
870 QDECREF(bs->options);
877 * Opens the backing file for a BlockDriverState if not yet open
879 * options is a QDict of options to pass to the block drivers, or NULL for an
880 * empty set of options. The reference to the QDict is transferred to this
881 * function (even on failure), so if the caller intends to reuse the dictionary,
882 * it needs to use QINCREF() before calling bdrv_file_open.
884 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options)
886 char backing_filename[PATH_MAX];
888 BlockDriver *back_drv = NULL;
890 if (bs->backing_hd != NULL) {
895 /* NULL means an empty set of options */
896 if (options == NULL) {
897 options = qdict_new();
900 bs->open_flags &= ~BDRV_O_NO_BACKING;
901 if (qdict_haskey(options, "file.filename")) {
902 backing_filename[0] = '\0';
903 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
908 bs->backing_hd = bdrv_new("");
909 bdrv_get_full_backing_filename(bs, backing_filename,
910 sizeof(backing_filename));
912 if (bs->backing_format[0] != '\0') {
913 back_drv = bdrv_find_format(bs->backing_format);
916 /* backing files always opened read-only */
917 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT);
919 ret = bdrv_open(bs->backing_hd,
920 *backing_filename ? backing_filename : NULL, options,
921 back_flags, back_drv);
923 bdrv_delete(bs->backing_hd);
924 bs->backing_hd = NULL;
925 bs->open_flags |= BDRV_O_NO_BACKING;
931 static void extract_subqdict(QDict *src, QDict **dst, const char *start)
933 const QDictEntry *entry, *next;
937 entry = qdict_first(src);
939 while (entry != NULL) {
940 next = qdict_next(src, entry);
941 if (strstart(entry->key, start, &p)) {
942 qobject_incref(entry->value);
943 qdict_put_obj(*dst, p, entry->value);
944 qdict_del(src, entry->key);
951 * Opens a disk image (raw, qcow2, vmdk, ...)
953 * options is a QDict of options to pass to the block drivers, or NULL for an
954 * empty set of options. The reference to the QDict belongs to the block layer
955 * after the call (even on failure), so if the caller intends to reuse the
956 * dictionary, it needs to use QINCREF() before calling bdrv_open.
958 int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
959 int flags, BlockDriver *drv)
962 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
963 char tmp_filename[PATH_MAX + 1];
964 BlockDriverState *file = NULL;
965 QDict *file_options = NULL;
967 /* NULL means an empty set of options */
968 if (options == NULL) {
969 options = qdict_new();
972 bs->options = options;
973 options = qdict_clone_shallow(options);
975 /* For snapshot=on, create a temporary qcow2 overlay */
976 if (flags & BDRV_O_SNAPSHOT) {
977 BlockDriverState *bs1;
979 BlockDriver *bdrv_qcow2;
980 QEMUOptionParameter *create_options;
981 char backing_filename[PATH_MAX];
983 if (qdict_size(options) != 0) {
984 error_report("Can't use snapshot=on with driver-specific options");
988 assert(filename != NULL);
990 /* if snapshot, we create a temporary backing file and open it
991 instead of opening 'filename' directly */
993 /* if there is a backing file, use it */
995 ret = bdrv_open(bs1, filename, NULL, 0, drv);
1000 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1004 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1009 /* Real path is meaningless for protocols */
1010 if (path_has_protocol(filename)) {
1011 snprintf(backing_filename, sizeof(backing_filename),
1013 } else if (!realpath(filename, backing_filename)) {
1018 bdrv_qcow2 = bdrv_find_format("qcow2");
1019 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1022 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1023 set_option_parameter(create_options, BLOCK_OPT_BACKING_FILE,
1026 set_option_parameter(create_options, BLOCK_OPT_BACKING_FMT,
1030 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options);
1031 free_option_parameters(create_options);
1036 filename = tmp_filename;
1038 bs->is_temporary = 1;
1041 /* Open image file without format layer */
1042 if (flags & BDRV_O_RDWR) {
1043 flags |= BDRV_O_ALLOW_RDWR;
1046 extract_subqdict(options, &file_options, "file.");
1048 ret = bdrv_file_open(&file, filename, file_options,
1049 bdrv_open_flags(bs, flags | BDRV_O_UNMAP));
1054 /* Find the right image format driver */
1056 ret = find_image_format(file, filename, &drv);
1060 goto unlink_and_fail;
1063 /* Open the image */
1064 ret = bdrv_open_common(bs, file, options, flags, drv);
1066 goto unlink_and_fail;
1069 if (bs->file != file) {
1074 /* If there is a backing file, use it */
1075 if ((flags & BDRV_O_NO_BACKING) == 0) {
1076 QDict *backing_options;
1078 extract_subqdict(options, &backing_options, "backing.");
1079 ret = bdrv_open_backing_file(bs, backing_options);
1081 goto close_and_fail;
1085 /* Check if any unknown options were used */
1086 if (qdict_size(options) != 0) {
1087 const QDictEntry *entry = qdict_first(options);
1088 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block format '%s' used by "
1089 "device '%s' doesn't support the option '%s'",
1090 drv->format_name, bs->device_name, entry->key);
1093 goto close_and_fail;
1097 if (!bdrv_key_required(bs)) {
1098 bdrv_dev_change_media_cb(bs, true);
1101 /* throttling disk I/O limits */
1102 if (bs->io_limits_enabled) {
1103 bdrv_io_limits_enable(bs);
1112 if (bs->is_temporary) {
1116 QDECREF(bs->options);
1127 typedef struct BlockReopenQueueEntry {
1129 BDRVReopenState state;
1130 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1131 } BlockReopenQueueEntry;
1134 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1135 * reopen of multiple devices.
1137 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1138 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1139 * be created and initialized. This newly created BlockReopenQueue should be
1140 * passed back in for subsequent calls that are intended to be of the same
1143 * bs is the BlockDriverState to add to the reopen queue.
1145 * flags contains the open flags for the associated bs
1147 * returns a pointer to bs_queue, which is either the newly allocated
1148 * bs_queue, or the existing bs_queue being used.
1151 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1152 BlockDriverState *bs, int flags)
1156 BlockReopenQueueEntry *bs_entry;
1157 if (bs_queue == NULL) {
1158 bs_queue = g_new0(BlockReopenQueue, 1);
1159 QSIMPLEQ_INIT(bs_queue);
1163 bdrv_reopen_queue(bs_queue, bs->file, flags);
1166 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1167 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1169 bs_entry->state.bs = bs;
1170 bs_entry->state.flags = flags;
1176 * Reopen multiple BlockDriverStates atomically & transactionally.
1178 * The queue passed in (bs_queue) must have been built up previous
1179 * via bdrv_reopen_queue().
1181 * Reopens all BDS specified in the queue, with the appropriate
1182 * flags. All devices are prepared for reopen, and failure of any
1183 * device will cause all device changes to be abandonded, and intermediate
1186 * If all devices prepare successfully, then the changes are committed
1190 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1193 BlockReopenQueueEntry *bs_entry, *next;
1194 Error *local_err = NULL;
1196 assert(bs_queue != NULL);
1200 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1201 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1202 error_propagate(errp, local_err);
1205 bs_entry->prepared = true;
1208 /* If we reach this point, we have success and just need to apply the
1211 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1212 bdrv_reopen_commit(&bs_entry->state);
1218 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1219 if (ret && bs_entry->prepared) {
1220 bdrv_reopen_abort(&bs_entry->state);
1229 /* Reopen a single BlockDriverState with the specified flags. */
1230 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1233 Error *local_err = NULL;
1234 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1236 ret = bdrv_reopen_multiple(queue, &local_err);
1237 if (local_err != NULL) {
1238 error_propagate(errp, local_err);
1245 * Prepares a BlockDriverState for reopen. All changes are staged in the
1246 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1247 * the block driver layer .bdrv_reopen_prepare()
1249 * bs is the BlockDriverState to reopen
1250 * flags are the new open flags
1251 * queue is the reopen queue
1253 * Returns 0 on success, non-zero on error. On error errp will be set
1256 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1257 * It is the responsibility of the caller to then call the abort() or
1258 * commit() for any other BDS that have been left in a prepare() state
1261 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1265 Error *local_err = NULL;
1268 assert(reopen_state != NULL);
1269 assert(reopen_state->bs->drv != NULL);
1270 drv = reopen_state->bs->drv;
1272 /* if we are to stay read-only, do not allow permission change
1274 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1275 reopen_state->flags & BDRV_O_RDWR) {
1276 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1277 reopen_state->bs->device_name);
1282 ret = bdrv_flush(reopen_state->bs);
1284 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1289 if (drv->bdrv_reopen_prepare) {
1290 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1292 if (local_err != NULL) {
1293 error_propagate(errp, local_err);
1295 error_setg(errp, "failed while preparing to reopen image '%s'",
1296 reopen_state->bs->filename);
1301 /* It is currently mandatory to have a bdrv_reopen_prepare()
1302 * handler for each supported drv. */
1303 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1304 drv->format_name, reopen_state->bs->device_name,
1305 "reopening of file");
1317 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1318 * makes them final by swapping the staging BlockDriverState contents into
1319 * the active BlockDriverState contents.
1321 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1325 assert(reopen_state != NULL);
1326 drv = reopen_state->bs->drv;
1327 assert(drv != NULL);
1329 /* If there are any driver level actions to take */
1330 if (drv->bdrv_reopen_commit) {
1331 drv->bdrv_reopen_commit(reopen_state);
1334 /* set BDS specific flags now */
1335 reopen_state->bs->open_flags = reopen_state->flags;
1336 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1338 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1342 * Abort the reopen, and delete and free the staged changes in
1345 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1349 assert(reopen_state != NULL);
1350 drv = reopen_state->bs->drv;
1351 assert(drv != NULL);
1353 if (drv->bdrv_reopen_abort) {
1354 drv->bdrv_reopen_abort(reopen_state);
1359 void bdrv_close(BlockDriverState *bs)
1363 block_job_cancel_sync(bs->job);
1366 notifier_list_notify(&bs->close_notifiers, bs);
1369 if (bs->backing_hd) {
1370 bdrv_delete(bs->backing_hd);
1371 bs->backing_hd = NULL;
1373 bs->drv->bdrv_close(bs);
1376 if (bs->is_temporary) {
1377 unlink(bs->filename);
1382 bs->copy_on_read = 0;
1383 bs->backing_file[0] = '\0';
1384 bs->backing_format[0] = '\0';
1385 bs->total_sectors = 0;
1390 QDECREF(bs->options);
1393 if (bs->file != NULL) {
1394 bdrv_delete(bs->file);
1399 bdrv_dev_change_media_cb(bs, false);
1401 /*throttling disk I/O limits*/
1402 if (bs->io_limits_enabled) {
1403 bdrv_io_limits_disable(bs);
1407 void bdrv_close_all(void)
1409 BlockDriverState *bs;
1411 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1417 * Wait for pending requests to complete across all BlockDriverStates
1419 * This function does not flush data to disk, use bdrv_flush_all() for that
1420 * after calling this function.
1422 * Note that completion of an asynchronous I/O operation can trigger any
1423 * number of other I/O operations on other devices---for example a coroutine
1424 * can be arbitrarily complex and a constant flow of I/O can come until the
1425 * coroutine is complete. Because of this, it is not possible to have a
1426 * function to drain a single device's I/O queue.
1428 void bdrv_drain_all(void)
1430 BlockDriverState *bs;
1434 busy = qemu_aio_wait();
1436 /* FIXME: We do not have timer support here, so this is effectively
1439 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1440 if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
1441 qemu_co_queue_restart_all(&bs->throttled_reqs);
1447 /* If requests are still pending there is a bug somewhere */
1448 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1449 assert(QLIST_EMPTY(&bs->tracked_requests));
1450 assert(qemu_co_queue_empty(&bs->throttled_reqs));
1454 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1455 Also, NULL terminate the device_name to prevent double remove */
1456 void bdrv_make_anon(BlockDriverState *bs)
1458 if (bs->device_name[0] != '\0') {
1459 QTAILQ_REMOVE(&bdrv_states, bs, list);
1461 bs->device_name[0] = '\0';
1464 static void bdrv_rebind(BlockDriverState *bs)
1466 if (bs->drv && bs->drv->bdrv_rebind) {
1467 bs->drv->bdrv_rebind(bs);
1471 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1472 BlockDriverState *bs_src)
1474 /* move some fields that need to stay attached to the device */
1475 bs_dest->open_flags = bs_src->open_flags;
1478 bs_dest->dev_ops = bs_src->dev_ops;
1479 bs_dest->dev_opaque = bs_src->dev_opaque;
1480 bs_dest->dev = bs_src->dev;
1481 bs_dest->buffer_alignment = bs_src->buffer_alignment;
1482 bs_dest->copy_on_read = bs_src->copy_on_read;
1484 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1486 /* i/o timing parameters */
1487 bs_dest->slice_start = bs_src->slice_start;
1488 bs_dest->slice_end = bs_src->slice_end;
1489 bs_dest->slice_submitted = bs_src->slice_submitted;
1490 bs_dest->io_limits = bs_src->io_limits;
1491 bs_dest->throttled_reqs = bs_src->throttled_reqs;
1492 bs_dest->block_timer = bs_src->block_timer;
1493 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1496 bs_dest->on_read_error = bs_src->on_read_error;
1497 bs_dest->on_write_error = bs_src->on_write_error;
1500 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1501 bs_dest->iostatus = bs_src->iostatus;
1504 bs_dest->dirty_bitmap = bs_src->dirty_bitmap;
1507 bs_dest->in_use = bs_src->in_use;
1508 bs_dest->job = bs_src->job;
1510 /* keep the same entry in bdrv_states */
1511 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1512 bs_src->device_name);
1513 bs_dest->list = bs_src->list;
1517 * Swap bs contents for two image chains while they are live,
1518 * while keeping required fields on the BlockDriverState that is
1519 * actually attached to a device.
1521 * This will modify the BlockDriverState fields, and swap contents
1522 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1524 * bs_new is required to be anonymous.
1526 * This function does not create any image files.
1528 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1530 BlockDriverState tmp;
1532 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1533 assert(bs_new->device_name[0] == '\0');
1534 assert(bs_new->dirty_bitmap == NULL);
1535 assert(bs_new->job == NULL);
1536 assert(bs_new->dev == NULL);
1537 assert(bs_new->in_use == 0);
1538 assert(bs_new->io_limits_enabled == false);
1539 assert(bs_new->block_timer == NULL);
1545 /* there are some fields that should not be swapped, move them back */
1546 bdrv_move_feature_fields(&tmp, bs_old);
1547 bdrv_move_feature_fields(bs_old, bs_new);
1548 bdrv_move_feature_fields(bs_new, &tmp);
1550 /* bs_new shouldn't be in bdrv_states even after the swap! */
1551 assert(bs_new->device_name[0] == '\0');
1553 /* Check a few fields that should remain attached to the device */
1554 assert(bs_new->dev == NULL);
1555 assert(bs_new->job == NULL);
1556 assert(bs_new->in_use == 0);
1557 assert(bs_new->io_limits_enabled == false);
1558 assert(bs_new->block_timer == NULL);
1560 bdrv_rebind(bs_new);
1561 bdrv_rebind(bs_old);
1565 * Add new bs contents at the top of an image chain while the chain is
1566 * live, while keeping required fields on the top layer.
1568 * This will modify the BlockDriverState fields, and swap contents
1569 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1571 * bs_new is required to be anonymous.
1573 * This function does not create any image files.
1575 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1577 bdrv_swap(bs_new, bs_top);
1579 /* The contents of 'tmp' will become bs_top, as we are
1580 * swapping bs_new and bs_top contents. */
1581 bs_top->backing_hd = bs_new;
1582 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1583 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1585 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1586 bs_new->drv ? bs_new->drv->format_name : "");
1589 void bdrv_delete(BlockDriverState *bs)
1593 assert(!bs->in_use);
1595 /* remove from list, if necessary */
1603 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1604 /* TODO change to DeviceState *dev when all users are qdevified */
1610 bdrv_iostatus_reset(bs);
1614 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1615 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1617 if (bdrv_attach_dev(bs, dev) < 0) {
1622 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1623 /* TODO change to DeviceState *dev when all users are qdevified */
1625 assert(bs->dev == dev);
1628 bs->dev_opaque = NULL;
1629 bs->buffer_alignment = 512;
1632 /* TODO change to return DeviceState * when all users are qdevified */
1633 void *bdrv_get_attached_dev(BlockDriverState *bs)
1638 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1642 bs->dev_opaque = opaque;
1645 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1646 enum MonitorEvent ev,
1647 BlockErrorAction action, bool is_read)
1650 const char *action_str;
1653 case BDRV_ACTION_REPORT:
1654 action_str = "report";
1656 case BDRV_ACTION_IGNORE:
1657 action_str = "ignore";
1659 case BDRV_ACTION_STOP:
1660 action_str = "stop";
1666 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1669 is_read ? "read" : "write");
1670 monitor_protocol_event(ev, data);
1672 qobject_decref(data);
1675 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
1679 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1680 bdrv_get_device_name(bs), ejected);
1681 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
1683 qobject_decref(data);
1686 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
1688 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
1689 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
1690 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
1691 if (tray_was_closed) {
1693 bdrv_emit_qmp_eject_event(bs, true);
1697 bdrv_emit_qmp_eject_event(bs, false);
1702 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
1704 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
1707 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
1709 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
1710 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
1714 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
1716 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
1717 return bs->dev_ops->is_tray_open(bs->dev_opaque);
1722 static void bdrv_dev_resize_cb(BlockDriverState *bs)
1724 if (bs->dev_ops && bs->dev_ops->resize_cb) {
1725 bs->dev_ops->resize_cb(bs->dev_opaque);
1729 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
1731 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
1732 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
1738 * Run consistency checks on an image
1740 * Returns 0 if the check could be completed (it doesn't mean that the image is
1741 * free of errors) or -errno when an internal error occurred. The results of the
1742 * check are stored in res.
1744 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
1746 if (bs->drv->bdrv_check == NULL) {
1750 memset(res, 0, sizeof(*res));
1751 return bs->drv->bdrv_check(bs, res, fix);
1754 #define COMMIT_BUF_SECTORS 2048
1756 /* commit COW file into the raw image */
1757 int bdrv_commit(BlockDriverState *bs)
1759 BlockDriver *drv = bs->drv;
1760 int64_t sector, total_sectors;
1761 int n, ro, open_flags;
1764 char filename[PATH_MAX];
1769 if (!bs->backing_hd) {
1773 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
1777 ro = bs->backing_hd->read_only;
1778 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1779 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
1780 open_flags = bs->backing_hd->open_flags;
1783 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
1788 total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
1789 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
1791 for (sector = 0; sector < total_sectors; sector += n) {
1792 if (bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n)) {
1794 if (bdrv_read(bs, sector, buf, n) != 0) {
1799 if (bdrv_write(bs->backing_hd, sector, buf, n) != 0) {
1806 if (drv->bdrv_make_empty) {
1807 ret = drv->bdrv_make_empty(bs);
1812 * Make sure all data we wrote to the backing device is actually
1816 bdrv_flush(bs->backing_hd);
1822 /* ignoring error return here */
1823 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
1829 int bdrv_commit_all(void)
1831 BlockDriverState *bs;
1833 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1834 if (bs->drv && bs->backing_hd) {
1835 int ret = bdrv_commit(bs);
1845 * Remove an active request from the tracked requests list
1847 * This function should be called when a tracked request is completing.
1849 static void tracked_request_end(BdrvTrackedRequest *req)
1851 QLIST_REMOVE(req, list);
1852 qemu_co_queue_restart_all(&req->wait_queue);
1856 * Add an active request to the tracked requests list
1858 static void tracked_request_begin(BdrvTrackedRequest *req,
1859 BlockDriverState *bs,
1861 int nb_sectors, bool is_write)
1863 *req = (BdrvTrackedRequest){
1865 .sector_num = sector_num,
1866 .nb_sectors = nb_sectors,
1867 .is_write = is_write,
1868 .co = qemu_coroutine_self(),
1871 qemu_co_queue_init(&req->wait_queue);
1873 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
1877 * Round a region to cluster boundaries
1879 void bdrv_round_to_clusters(BlockDriverState *bs,
1880 int64_t sector_num, int nb_sectors,
1881 int64_t *cluster_sector_num,
1882 int *cluster_nb_sectors)
1884 BlockDriverInfo bdi;
1886 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
1887 *cluster_sector_num = sector_num;
1888 *cluster_nb_sectors = nb_sectors;
1890 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
1891 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
1892 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
1897 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
1898 int64_t sector_num, int nb_sectors) {
1900 if (sector_num >= req->sector_num + req->nb_sectors) {
1904 if (req->sector_num >= sector_num + nb_sectors) {
1910 static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
1911 int64_t sector_num, int nb_sectors)
1913 BdrvTrackedRequest *req;
1914 int64_t cluster_sector_num;
1915 int cluster_nb_sectors;
1918 /* If we touch the same cluster it counts as an overlap. This guarantees
1919 * that allocating writes will be serialized and not race with each other
1920 * for the same cluster. For example, in copy-on-read it ensures that the
1921 * CoR read and write operations are atomic and guest writes cannot
1922 * interleave between them.
1924 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
1925 &cluster_sector_num, &cluster_nb_sectors);
1929 QLIST_FOREACH(req, &bs->tracked_requests, list) {
1930 if (tracked_request_overlaps(req, cluster_sector_num,
1931 cluster_nb_sectors)) {
1932 /* Hitting this means there was a reentrant request, for
1933 * example, a block driver issuing nested requests. This must
1934 * never happen since it means deadlock.
1936 assert(qemu_coroutine_self() != req->co);
1938 qemu_co_queue_wait(&req->wait_queue);
1949 * -EINVAL - backing format specified, but no file
1950 * -ENOSPC - can't update the backing file because no space is left in the
1952 * -ENOTSUP - format driver doesn't support changing the backing file
1954 int bdrv_change_backing_file(BlockDriverState *bs,
1955 const char *backing_file, const char *backing_fmt)
1957 BlockDriver *drv = bs->drv;
1960 /* Backing file format doesn't make sense without a backing file */
1961 if (backing_fmt && !backing_file) {
1965 if (drv->bdrv_change_backing_file != NULL) {
1966 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
1972 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
1973 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
1979 * Finds the image layer in the chain that has 'bs' as its backing file.
1981 * active is the current topmost image.
1983 * Returns NULL if bs is not found in active's image chain,
1984 * or if active == bs.
1986 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
1987 BlockDriverState *bs)
1989 BlockDriverState *overlay = NULL;
1990 BlockDriverState *intermediate;
1992 assert(active != NULL);
1995 /* if bs is the same as active, then by definition it has no overlay
2001 intermediate = active;
2002 while (intermediate->backing_hd) {
2003 if (intermediate->backing_hd == bs) {
2004 overlay = intermediate;
2007 intermediate = intermediate->backing_hd;
2013 typedef struct BlkIntermediateStates {
2014 BlockDriverState *bs;
2015 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2016 } BlkIntermediateStates;
2020 * Drops images above 'base' up to and including 'top', and sets the image
2021 * above 'top' to have base as its backing file.
2023 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2024 * information in 'bs' can be properly updated.
2026 * E.g., this will convert the following chain:
2027 * bottom <- base <- intermediate <- top <- active
2031 * bottom <- base <- active
2033 * It is allowed for bottom==base, in which case it converts:
2035 * base <- intermediate <- top <- active
2042 * if active == top, that is considered an error
2045 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2046 BlockDriverState *base)
2048 BlockDriverState *intermediate;
2049 BlockDriverState *base_bs = NULL;
2050 BlockDriverState *new_top_bs = NULL;
2051 BlkIntermediateStates *intermediate_state, *next;
2054 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2055 QSIMPLEQ_INIT(&states_to_delete);
2057 if (!top->drv || !base->drv) {
2061 new_top_bs = bdrv_find_overlay(active, top);
2063 if (new_top_bs == NULL) {
2064 /* we could not find the image above 'top', this is an error */
2068 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2069 * to do, no intermediate images */
2070 if (new_top_bs->backing_hd == base) {
2077 /* now we will go down through the list, and add each BDS we find
2078 * into our deletion queue, until we hit the 'base'
2080 while (intermediate) {
2081 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2082 intermediate_state->bs = intermediate;
2083 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2085 if (intermediate->backing_hd == base) {
2086 base_bs = intermediate->backing_hd;
2089 intermediate = intermediate->backing_hd;
2091 if (base_bs == NULL) {
2092 /* something went wrong, we did not end at the base. safely
2093 * unravel everything, and exit with error */
2097 /* success - we can delete the intermediate states, and link top->base */
2098 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2099 base_bs->drv ? base_bs->drv->format_name : "");
2103 new_top_bs->backing_hd = base_bs;
2106 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2107 /* so that bdrv_close() does not recursively close the chain */
2108 intermediate_state->bs->backing_hd = NULL;
2109 bdrv_delete(intermediate_state->bs);
2114 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2115 g_free(intermediate_state);
2121 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2126 if (!bdrv_is_inserted(bs))
2132 len = bdrv_getlength(bs);
2137 if ((offset > len) || (len - offset < size))
2143 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2146 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2147 nb_sectors * BDRV_SECTOR_SIZE);
2150 typedef struct RwCo {
2151 BlockDriverState *bs;
2159 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2161 RwCo *rwco = opaque;
2163 if (!rwco->is_write) {
2164 rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
2165 rwco->nb_sectors, rwco->qiov, 0);
2167 rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
2168 rwco->nb_sectors, rwco->qiov, 0);
2173 * Process a vectored synchronous request using coroutines
2175 static int bdrv_rwv_co(BlockDriverState *bs, int64_t sector_num,
2176 QEMUIOVector *qiov, bool is_write)
2181 .sector_num = sector_num,
2182 .nb_sectors = qiov->size >> BDRV_SECTOR_BITS,
2184 .is_write = is_write,
2187 assert((qiov->size & (BDRV_SECTOR_SIZE - 1)) == 0);
2190 * In sync call context, when the vcpu is blocked, this throttling timer
2191 * will not fire; so the I/O throttling function has to be disabled here
2192 * if it has been enabled.
2194 if (bs->io_limits_enabled) {
2195 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2196 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2197 bdrv_io_limits_disable(bs);
2200 if (qemu_in_coroutine()) {
2201 /* Fast-path if already in coroutine context */
2202 bdrv_rw_co_entry(&rwco);
2204 co = qemu_coroutine_create(bdrv_rw_co_entry);
2205 qemu_coroutine_enter(co, &rwco);
2206 while (rwco.ret == NOT_DONE) {
2214 * Process a synchronous request using coroutines
2216 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2217 int nb_sectors, bool is_write)
2220 struct iovec iov = {
2221 .iov_base = (void *)buf,
2222 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2225 qemu_iovec_init_external(&qiov, &iov, 1);
2226 return bdrv_rwv_co(bs, sector_num, &qiov, is_write);
2229 /* return < 0 if error. See bdrv_write() for the return codes */
2230 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2231 uint8_t *buf, int nb_sectors)
2233 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false);
2236 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2237 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2238 uint8_t *buf, int nb_sectors)
2243 enabled = bs->io_limits_enabled;
2244 bs->io_limits_enabled = false;
2245 ret = bdrv_read(bs, 0, buf, 1);
2246 bs->io_limits_enabled = enabled;
2250 /* Return < 0 if error. Important errors are:
2251 -EIO generic I/O error (may happen for all errors)
2252 -ENOMEDIUM No media inserted.
2253 -EINVAL Invalid sector number or nb_sectors
2254 -EACCES Trying to write a read-only device
2256 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2257 const uint8_t *buf, int nb_sectors)
2259 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true);
2262 int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov)
2264 return bdrv_rwv_co(bs, sector_num, qiov, true);
2267 int bdrv_pread(BlockDriverState *bs, int64_t offset,
2268 void *buf, int count1)
2270 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2271 int len, nb_sectors, count;
2276 /* first read to align to sector start */
2277 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2280 sector_num = offset >> BDRV_SECTOR_BITS;
2282 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2284 memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
2292 /* read the sectors "in place" */
2293 nb_sectors = count >> BDRV_SECTOR_BITS;
2294 if (nb_sectors > 0) {
2295 if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
2297 sector_num += nb_sectors;
2298 len = nb_sectors << BDRV_SECTOR_BITS;
2303 /* add data from the last sector */
2305 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2307 memcpy(buf, tmp_buf, count);
2312 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2314 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2315 int len, nb_sectors, count;
2321 /* first write to align to sector start */
2322 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2325 sector_num = offset >> BDRV_SECTOR_BITS;
2327 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2329 qemu_iovec_to_buf(qiov, 0, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)),
2331 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2339 /* write the sectors "in place" */
2340 nb_sectors = count >> BDRV_SECTOR_BITS;
2341 if (nb_sectors > 0) {
2342 QEMUIOVector qiov_inplace;
2344 qemu_iovec_init(&qiov_inplace, qiov->niov);
2345 qemu_iovec_concat(&qiov_inplace, qiov, len,
2346 nb_sectors << BDRV_SECTOR_BITS);
2347 ret = bdrv_writev(bs, sector_num, &qiov_inplace);
2348 qemu_iovec_destroy(&qiov_inplace);
2353 sector_num += nb_sectors;
2354 len = nb_sectors << BDRV_SECTOR_BITS;
2358 /* add data from the last sector */
2360 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2362 qemu_iovec_to_buf(qiov, qiov->size - count, tmp_buf, count);
2363 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2369 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2370 const void *buf, int count1)
2373 struct iovec iov = {
2374 .iov_base = (void *) buf,
2378 qemu_iovec_init_external(&qiov, &iov, 1);
2379 return bdrv_pwritev(bs, offset, &qiov);
2383 * Writes to the file and ensures that no writes are reordered across this
2384 * request (acts as a barrier)
2386 * Returns 0 on success, -errno in error cases.
2388 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2389 const void *buf, int count)
2393 ret = bdrv_pwrite(bs, offset, buf, count);
2398 /* No flush needed for cache modes that already do it */
2399 if (bs->enable_write_cache) {
2406 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2407 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2409 /* Perform I/O through a temporary buffer so that users who scribble over
2410 * their read buffer while the operation is in progress do not end up
2411 * modifying the image file. This is critical for zero-copy guest I/O
2412 * where anything might happen inside guest memory.
2414 void *bounce_buffer;
2416 BlockDriver *drv = bs->drv;
2418 QEMUIOVector bounce_qiov;
2419 int64_t cluster_sector_num;
2420 int cluster_nb_sectors;
2424 /* Cover entire cluster so no additional backing file I/O is required when
2425 * allocating cluster in the image file.
2427 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2428 &cluster_sector_num, &cluster_nb_sectors);
2430 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2431 cluster_sector_num, cluster_nb_sectors);
2433 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2434 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2435 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2437 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2443 if (drv->bdrv_co_write_zeroes &&
2444 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2445 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2446 cluster_nb_sectors);
2448 /* This does not change the data on the disk, it is not necessary
2449 * to flush even in cache=writethrough mode.
2451 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2456 /* It might be okay to ignore write errors for guest requests. If this
2457 * is a deliberate copy-on-read then we don't want to ignore the error.
2458 * Simply report it in all cases.
2463 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2464 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2465 nb_sectors * BDRV_SECTOR_SIZE);
2468 qemu_vfree(bounce_buffer);
2473 * Handle a read request in coroutine context
2475 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
2476 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2477 BdrvRequestFlags flags)
2479 BlockDriver *drv = bs->drv;
2480 BdrvTrackedRequest req;
2486 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2490 /* throttling disk read I/O */
2491 if (bs->io_limits_enabled) {
2492 bdrv_io_limits_intercept(bs, false, nb_sectors);
2495 if (bs->copy_on_read) {
2496 flags |= BDRV_REQ_COPY_ON_READ;
2498 if (flags & BDRV_REQ_COPY_ON_READ) {
2499 bs->copy_on_read_in_flight++;
2502 if (bs->copy_on_read_in_flight) {
2503 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2506 tracked_request_begin(&req, bs, sector_num, nb_sectors, false);
2508 if (flags & BDRV_REQ_COPY_ON_READ) {
2511 ret = bdrv_co_is_allocated(bs, sector_num, nb_sectors, &pnum);
2516 if (!ret || pnum != nb_sectors) {
2517 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2522 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2525 tracked_request_end(&req);
2527 if (flags & BDRV_REQ_COPY_ON_READ) {
2528 bs->copy_on_read_in_flight--;
2534 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
2535 int nb_sectors, QEMUIOVector *qiov)
2537 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
2539 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
2542 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
2543 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2545 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
2547 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
2548 BDRV_REQ_COPY_ON_READ);
2551 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
2552 int64_t sector_num, int nb_sectors)
2554 BlockDriver *drv = bs->drv;
2559 /* TODO Emulate only part of misaligned requests instead of letting block
2560 * drivers return -ENOTSUP and emulate everything */
2562 /* First try the efficient write zeroes operation */
2563 if (drv->bdrv_co_write_zeroes) {
2564 ret = drv->bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2565 if (ret != -ENOTSUP) {
2570 /* Fall back to bounce buffer if write zeroes is unsupported */
2571 iov.iov_len = nb_sectors * BDRV_SECTOR_SIZE;
2572 iov.iov_base = qemu_blockalign(bs, iov.iov_len);
2573 memset(iov.iov_base, 0, iov.iov_len);
2574 qemu_iovec_init_external(&qiov, &iov, 1);
2576 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, &qiov);
2578 qemu_vfree(iov.iov_base);
2583 * Handle a write request in coroutine context
2585 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
2586 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2587 BdrvRequestFlags flags)
2589 BlockDriver *drv = bs->drv;
2590 BdrvTrackedRequest req;
2596 if (bs->read_only) {
2599 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2603 /* throttling disk write I/O */
2604 if (bs->io_limits_enabled) {
2605 bdrv_io_limits_intercept(bs, true, nb_sectors);
2608 if (bs->copy_on_read_in_flight) {
2609 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2612 tracked_request_begin(&req, bs, sector_num, nb_sectors, true);
2614 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, &req);
2617 /* Do nothing, write notifier decided to fail this request */
2618 } else if (flags & BDRV_REQ_ZERO_WRITE) {
2619 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors);
2621 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
2624 if (ret == 0 && !bs->enable_write_cache) {
2625 ret = bdrv_co_flush(bs);
2628 if (bs->dirty_bitmap) {
2629 bdrv_set_dirty(bs, sector_num, nb_sectors);
2632 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
2633 bs->wr_highest_sector = sector_num + nb_sectors - 1;
2636 tracked_request_end(&req);
2641 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
2642 int nb_sectors, QEMUIOVector *qiov)
2644 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
2646 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
2649 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
2650 int64_t sector_num, int nb_sectors)
2652 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2654 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
2655 BDRV_REQ_ZERO_WRITE);
2659 * Truncate file to 'offset' bytes (needed only for file protocols)
2661 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
2663 BlockDriver *drv = bs->drv;
2667 if (!drv->bdrv_truncate)
2671 if (bdrv_in_use(bs))
2673 ret = drv->bdrv_truncate(bs, offset);
2675 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
2676 bdrv_dev_resize_cb(bs);
2682 * Length of a allocated file in bytes. Sparse files are counted by actual
2683 * allocated space. Return < 0 if error or unknown.
2685 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
2687 BlockDriver *drv = bs->drv;
2691 if (drv->bdrv_get_allocated_file_size) {
2692 return drv->bdrv_get_allocated_file_size(bs);
2695 return bdrv_get_allocated_file_size(bs->file);
2701 * Length of a file in bytes. Return < 0 if error or unknown.
2703 int64_t bdrv_getlength(BlockDriverState *bs)
2705 BlockDriver *drv = bs->drv;
2709 if (bs->growable || bdrv_dev_has_removable_media(bs)) {
2710 if (drv->bdrv_getlength) {
2711 return drv->bdrv_getlength(bs);
2714 return bs->total_sectors * BDRV_SECTOR_SIZE;
2717 /* return 0 as number of sectors if no device present or error */
2718 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
2721 length = bdrv_getlength(bs);
2725 length = length >> BDRV_SECTOR_BITS;
2726 *nb_sectors_ptr = length;
2729 /* throttling disk io limits */
2730 void bdrv_set_io_limits(BlockDriverState *bs,
2731 BlockIOLimit *io_limits)
2733 bs->io_limits = *io_limits;
2734 bs->io_limits_enabled = bdrv_io_limits_enabled(bs);
2737 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
2738 BlockdevOnError on_write_error)
2740 bs->on_read_error = on_read_error;
2741 bs->on_write_error = on_write_error;
2744 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
2746 return is_read ? bs->on_read_error : bs->on_write_error;
2749 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
2751 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
2754 case BLOCKDEV_ON_ERROR_ENOSPC:
2755 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
2756 case BLOCKDEV_ON_ERROR_STOP:
2757 return BDRV_ACTION_STOP;
2758 case BLOCKDEV_ON_ERROR_REPORT:
2759 return BDRV_ACTION_REPORT;
2760 case BLOCKDEV_ON_ERROR_IGNORE:
2761 return BDRV_ACTION_IGNORE;
2767 /* This is done by device models because, while the block layer knows
2768 * about the error, it does not know whether an operation comes from
2769 * the device or the block layer (from a job, for example).
2771 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
2772 bool is_read, int error)
2775 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
2776 if (action == BDRV_ACTION_STOP) {
2777 vm_stop(RUN_STATE_IO_ERROR);
2778 bdrv_iostatus_set_err(bs, error);
2782 int bdrv_is_read_only(BlockDriverState *bs)
2784 return bs->read_only;
2787 int bdrv_is_sg(BlockDriverState *bs)
2792 int bdrv_enable_write_cache(BlockDriverState *bs)
2794 return bs->enable_write_cache;
2797 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
2799 bs->enable_write_cache = wce;
2801 /* so a reopen() will preserve wce */
2803 bs->open_flags |= BDRV_O_CACHE_WB;
2805 bs->open_flags &= ~BDRV_O_CACHE_WB;
2809 int bdrv_is_encrypted(BlockDriverState *bs)
2811 if (bs->backing_hd && bs->backing_hd->encrypted)
2813 return bs->encrypted;
2816 int bdrv_key_required(BlockDriverState *bs)
2818 BlockDriverState *backing_hd = bs->backing_hd;
2820 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
2822 return (bs->encrypted && !bs->valid_key);
2825 int bdrv_set_key(BlockDriverState *bs, const char *key)
2828 if (bs->backing_hd && bs->backing_hd->encrypted) {
2829 ret = bdrv_set_key(bs->backing_hd, key);
2835 if (!bs->encrypted) {
2837 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
2840 ret = bs->drv->bdrv_set_key(bs, key);
2843 } else if (!bs->valid_key) {
2845 /* call the change callback now, we skipped it on open */
2846 bdrv_dev_change_media_cb(bs, true);
2851 const char *bdrv_get_format_name(BlockDriverState *bs)
2853 return bs->drv ? bs->drv->format_name : NULL;
2856 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
2861 QLIST_FOREACH(drv, &bdrv_drivers, list) {
2862 it(opaque, drv->format_name);
2866 BlockDriverState *bdrv_find(const char *name)
2868 BlockDriverState *bs;
2870 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2871 if (!strcmp(name, bs->device_name)) {
2878 BlockDriverState *bdrv_next(BlockDriverState *bs)
2881 return QTAILQ_FIRST(&bdrv_states);
2883 return QTAILQ_NEXT(bs, list);
2886 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
2888 BlockDriverState *bs;
2890 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2895 const char *bdrv_get_device_name(BlockDriverState *bs)
2897 return bs->device_name;
2900 int bdrv_get_flags(BlockDriverState *bs)
2902 return bs->open_flags;
2905 void bdrv_flush_all(void)
2907 BlockDriverState *bs;
2909 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2914 int bdrv_has_zero_init_1(BlockDriverState *bs)
2919 int bdrv_has_zero_init(BlockDriverState *bs)
2923 if (bs->drv->bdrv_has_zero_init) {
2924 return bs->drv->bdrv_has_zero_init(bs);
2931 typedef struct BdrvCoIsAllocatedData {
2932 BlockDriverState *bs;
2933 BlockDriverState *base;
2939 } BdrvCoIsAllocatedData;
2942 * Returns true iff the specified sector is present in the disk image. Drivers
2943 * not implementing the functionality are assumed to not support backing files,
2944 * hence all their sectors are reported as allocated.
2946 * If 'sector_num' is beyond the end of the disk image the return value is 0
2947 * and 'pnum' is set to 0.
2949 * 'pnum' is set to the number of sectors (including and immediately following
2950 * the specified sector) that are known to be in the same
2951 * allocated/unallocated state.
2953 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
2954 * beyond the end of the disk image it will be clamped.
2956 int coroutine_fn bdrv_co_is_allocated(BlockDriverState *bs, int64_t sector_num,
2957 int nb_sectors, int *pnum)
2961 if (sector_num >= bs->total_sectors) {
2966 n = bs->total_sectors - sector_num;
2967 if (n < nb_sectors) {
2971 if (!bs->drv->bdrv_co_is_allocated) {
2976 return bs->drv->bdrv_co_is_allocated(bs, sector_num, nb_sectors, pnum);
2979 /* Coroutine wrapper for bdrv_is_allocated() */
2980 static void coroutine_fn bdrv_is_allocated_co_entry(void *opaque)
2982 BdrvCoIsAllocatedData *data = opaque;
2983 BlockDriverState *bs = data->bs;
2985 data->ret = bdrv_co_is_allocated(bs, data->sector_num, data->nb_sectors,
2991 * Synchronous wrapper around bdrv_co_is_allocated().
2993 * See bdrv_co_is_allocated() for details.
2995 int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
2999 BdrvCoIsAllocatedData data = {
3001 .sector_num = sector_num,
3002 .nb_sectors = nb_sectors,
3007 co = qemu_coroutine_create(bdrv_is_allocated_co_entry);
3008 qemu_coroutine_enter(co, &data);
3009 while (!data.done) {
3016 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3018 * Return true if the given sector is allocated in any image between
3019 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3020 * sector is allocated in any image of the chain. Return false otherwise.
3022 * 'pnum' is set to the number of sectors (including and immediately following
3023 * the specified sector) that are known to be in the same
3024 * allocated/unallocated state.
3027 int coroutine_fn bdrv_co_is_allocated_above(BlockDriverState *top,
3028 BlockDriverState *base,
3030 int nb_sectors, int *pnum)
3032 BlockDriverState *intermediate;
3033 int ret, n = nb_sectors;
3036 while (intermediate && intermediate != base) {
3038 ret = bdrv_co_is_allocated(intermediate, sector_num, nb_sectors,
3048 * [sector_num, nb_sectors] is unallocated on top but intermediate
3051 * [sector_num+x, nr_sectors] allocated.
3053 if (n > pnum_inter &&
3054 (intermediate == top ||
3055 sector_num + pnum_inter < intermediate->total_sectors)) {
3059 intermediate = intermediate->backing_hd;
3066 /* Coroutine wrapper for bdrv_is_allocated_above() */
3067 static void coroutine_fn bdrv_is_allocated_above_co_entry(void *opaque)
3069 BdrvCoIsAllocatedData *data = opaque;
3070 BlockDriverState *top = data->bs;
3071 BlockDriverState *base = data->base;
3073 data->ret = bdrv_co_is_allocated_above(top, base, data->sector_num,
3074 data->nb_sectors, data->pnum);
3079 * Synchronous wrapper around bdrv_co_is_allocated_above().
3081 * See bdrv_co_is_allocated_above() for details.
3083 int bdrv_is_allocated_above(BlockDriverState *top, BlockDriverState *base,
3084 int64_t sector_num, int nb_sectors, int *pnum)
3087 BdrvCoIsAllocatedData data = {
3090 .sector_num = sector_num,
3091 .nb_sectors = nb_sectors,
3096 co = qemu_coroutine_create(bdrv_is_allocated_above_co_entry);
3097 qemu_coroutine_enter(co, &data);
3098 while (!data.done) {
3104 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3106 if (bs->backing_hd && bs->backing_hd->encrypted)
3107 return bs->backing_file;
3108 else if (bs->encrypted)
3109 return bs->filename;
3114 void bdrv_get_backing_filename(BlockDriverState *bs,
3115 char *filename, int filename_size)
3117 pstrcpy(filename, filename_size, bs->backing_file);
3120 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3121 const uint8_t *buf, int nb_sectors)
3123 BlockDriver *drv = bs->drv;
3126 if (!drv->bdrv_write_compressed)
3128 if (bdrv_check_request(bs, sector_num, nb_sectors))
3131 assert(!bs->dirty_bitmap);
3133 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3136 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3138 BlockDriver *drv = bs->drv;
3141 if (!drv->bdrv_get_info)
3143 memset(bdi, 0, sizeof(*bdi));
3144 return drv->bdrv_get_info(bs, bdi);
3147 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3148 int64_t pos, int size)
3151 struct iovec iov = {
3152 .iov_base = (void *) buf,
3156 qemu_iovec_init_external(&qiov, &iov, 1);
3157 return bdrv_writev_vmstate(bs, &qiov, pos);
3160 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3162 BlockDriver *drv = bs->drv;
3166 } else if (drv->bdrv_save_vmstate) {
3167 return drv->bdrv_save_vmstate(bs, qiov, pos);
3168 } else if (bs->file) {
3169 return bdrv_writev_vmstate(bs->file, qiov, pos);
3175 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3176 int64_t pos, int size)
3178 BlockDriver *drv = bs->drv;
3181 if (drv->bdrv_load_vmstate)
3182 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3184 return bdrv_load_vmstate(bs->file, buf, pos, size);
3188 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
3190 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
3194 bs->drv->bdrv_debug_event(bs, event);
3197 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
3200 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
3204 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
3205 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
3211 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
3213 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
3217 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
3218 return bs->drv->bdrv_debug_resume(bs, tag);
3224 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
3226 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
3230 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
3231 return bs->drv->bdrv_debug_is_suspended(bs, tag);
3237 int bdrv_is_snapshot(BlockDriverState *bs)
3239 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
3242 /* backing_file can either be relative, or absolute, or a protocol. If it is
3243 * relative, it must be relative to the chain. So, passing in bs->filename
3244 * from a BDS as backing_file should not be done, as that may be relative to
3245 * the CWD rather than the chain. */
3246 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
3247 const char *backing_file)
3249 char *filename_full = NULL;
3250 char *backing_file_full = NULL;
3251 char *filename_tmp = NULL;
3252 int is_protocol = 0;
3253 BlockDriverState *curr_bs = NULL;
3254 BlockDriverState *retval = NULL;
3256 if (!bs || !bs->drv || !backing_file) {
3260 filename_full = g_malloc(PATH_MAX);
3261 backing_file_full = g_malloc(PATH_MAX);
3262 filename_tmp = g_malloc(PATH_MAX);
3264 is_protocol = path_has_protocol(backing_file);
3266 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
3268 /* If either of the filename paths is actually a protocol, then
3269 * compare unmodified paths; otherwise make paths relative */
3270 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
3271 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
3272 retval = curr_bs->backing_hd;
3276 /* If not an absolute filename path, make it relative to the current
3277 * image's filename path */
3278 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3281 /* We are going to compare absolute pathnames */
3282 if (!realpath(filename_tmp, filename_full)) {
3286 /* We need to make sure the backing filename we are comparing against
3287 * is relative to the current image filename (or absolute) */
3288 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3289 curr_bs->backing_file);
3291 if (!realpath(filename_tmp, backing_file_full)) {
3295 if (strcmp(backing_file_full, filename_full) == 0) {
3296 retval = curr_bs->backing_hd;
3302 g_free(filename_full);
3303 g_free(backing_file_full);
3304 g_free(filename_tmp);
3308 int bdrv_get_backing_file_depth(BlockDriverState *bs)
3314 if (!bs->backing_hd) {
3318 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
3321 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
3323 BlockDriverState *curr_bs = NULL;
3331 while (curr_bs->backing_hd) {
3332 curr_bs = curr_bs->backing_hd;
3337 /**************************************************************/
3340 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
3341 QEMUIOVector *qiov, int nb_sectors,
3342 BlockDriverCompletionFunc *cb, void *opaque)
3344 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
3346 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3350 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
3351 QEMUIOVector *qiov, int nb_sectors,
3352 BlockDriverCompletionFunc *cb, void *opaque)
3354 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
3356 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3361 typedef struct MultiwriteCB {
3366 BlockDriverCompletionFunc *cb;
3368 QEMUIOVector *free_qiov;
3372 static void multiwrite_user_cb(MultiwriteCB *mcb)
3376 for (i = 0; i < mcb->num_callbacks; i++) {
3377 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
3378 if (mcb->callbacks[i].free_qiov) {
3379 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
3381 g_free(mcb->callbacks[i].free_qiov);
3385 static void multiwrite_cb(void *opaque, int ret)
3387 MultiwriteCB *mcb = opaque;
3389 trace_multiwrite_cb(mcb, ret);
3391 if (ret < 0 && !mcb->error) {
3395 mcb->num_requests--;
3396 if (mcb->num_requests == 0) {
3397 multiwrite_user_cb(mcb);
3402 static int multiwrite_req_compare(const void *a, const void *b)
3404 const BlockRequest *req1 = a, *req2 = b;
3407 * Note that we can't simply subtract req2->sector from req1->sector
3408 * here as that could overflow the return value.
3410 if (req1->sector > req2->sector) {
3412 } else if (req1->sector < req2->sector) {
3420 * Takes a bunch of requests and tries to merge them. Returns the number of
3421 * requests that remain after merging.
3423 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
3424 int num_reqs, MultiwriteCB *mcb)
3428 // Sort requests by start sector
3429 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
3431 // Check if adjacent requests touch the same clusters. If so, combine them,
3432 // filling up gaps with zero sectors.
3434 for (i = 1; i < num_reqs; i++) {
3436 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
3438 // Handle exactly sequential writes and overlapping writes.
3439 if (reqs[i].sector <= oldreq_last) {
3443 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
3449 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
3450 qemu_iovec_init(qiov,
3451 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
3453 // Add the first request to the merged one. If the requests are
3454 // overlapping, drop the last sectors of the first request.
3455 size = (reqs[i].sector - reqs[outidx].sector) << 9;
3456 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
3458 // We should need to add any zeros between the two requests
3459 assert (reqs[i].sector <= oldreq_last);
3461 // Add the second request
3462 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
3464 reqs[outidx].nb_sectors = qiov->size >> 9;
3465 reqs[outidx].qiov = qiov;
3467 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
3470 reqs[outidx].sector = reqs[i].sector;
3471 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
3472 reqs[outidx].qiov = reqs[i].qiov;
3480 * Submit multiple AIO write requests at once.
3482 * On success, the function returns 0 and all requests in the reqs array have
3483 * been submitted. In error case this function returns -1, and any of the
3484 * requests may or may not be submitted yet. In particular, this means that the
3485 * callback will be called for some of the requests, for others it won't. The
3486 * caller must check the error field of the BlockRequest to wait for the right
3487 * callbacks (if error != 0, no callback will be called).
3489 * The implementation may modify the contents of the reqs array, e.g. to merge
3490 * requests. However, the fields opaque and error are left unmodified as they
3491 * are used to signal failure for a single request to the caller.
3493 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
3498 /* don't submit writes if we don't have a medium */
3499 if (bs->drv == NULL) {
3500 for (i = 0; i < num_reqs; i++) {
3501 reqs[i].error = -ENOMEDIUM;
3506 if (num_reqs == 0) {
3510 // Create MultiwriteCB structure
3511 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
3512 mcb->num_requests = 0;
3513 mcb->num_callbacks = num_reqs;
3515 for (i = 0; i < num_reqs; i++) {
3516 mcb->callbacks[i].cb = reqs[i].cb;
3517 mcb->callbacks[i].opaque = reqs[i].opaque;
3520 // Check for mergable requests
3521 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
3523 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
3525 /* Run the aio requests. */
3526 mcb->num_requests = num_reqs;
3527 for (i = 0; i < num_reqs; i++) {
3528 bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
3529 reqs[i].nb_sectors, multiwrite_cb, mcb);
3535 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
3537 acb->aiocb_info->cancel(acb);
3540 /* block I/O throttling */
3541 static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
3542 bool is_write, double elapsed_time, uint64_t *wait)
3544 uint64_t bps_limit = 0;
3546 double bytes_limit, bytes_base, bytes_res;
3547 double slice_time, wait_time;
3549 if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
3550 bps_limit = bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
3551 } else if (bs->io_limits.bps[is_write]) {
3552 bps_limit = bs->io_limits.bps[is_write];
3561 slice_time = bs->slice_end - bs->slice_start;
3562 slice_time /= (NANOSECONDS_PER_SECOND);
3563 bytes_limit = bps_limit * slice_time;
3564 bytes_base = bs->slice_submitted.bytes[is_write];
3565 if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
3566 bytes_base += bs->slice_submitted.bytes[!is_write];
3569 /* bytes_base: the bytes of data which have been read/written; and
3570 * it is obtained from the history statistic info.
3571 * bytes_res: the remaining bytes of data which need to be read/written.
3572 * (bytes_base + bytes_res) / bps_limit: used to calcuate
3573 * the total time for completing reading/writting all data.
3575 bytes_res = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;
3577 if (bytes_base + bytes_res <= bytes_limit) {
3585 /* Calc approx time to dispatch */
3586 wait_time = (bytes_base + bytes_res) / bps_limit - elapsed_time;
3588 /* When the I/O rate at runtime exceeds the limits,
3589 * bs->slice_end need to be extended in order that the current statistic
3590 * info can be kept until the timer fire, so it is increased and tuned
3591 * based on the result of experiment.
3593 extension = wait_time * NANOSECONDS_PER_SECOND;
3594 extension = DIV_ROUND_UP(extension, BLOCK_IO_SLICE_TIME) *
3595 BLOCK_IO_SLICE_TIME;
3596 bs->slice_end += extension;
3598 *wait = wait_time * NANOSECONDS_PER_SECOND;
3604 static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
3605 double elapsed_time, uint64_t *wait)
3607 uint64_t iops_limit = 0;
3608 double ios_limit, ios_base;
3609 double slice_time, wait_time;
3611 if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
3612 iops_limit = bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
3613 } else if (bs->io_limits.iops[is_write]) {
3614 iops_limit = bs->io_limits.iops[is_write];
3623 slice_time = bs->slice_end - bs->slice_start;
3624 slice_time /= (NANOSECONDS_PER_SECOND);
3625 ios_limit = iops_limit * slice_time;
3626 ios_base = bs->slice_submitted.ios[is_write];
3627 if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
3628 ios_base += bs->slice_submitted.ios[!is_write];
3631 if (ios_base + 1 <= ios_limit) {
3639 /* Calc approx time to dispatch, in seconds */
3640 wait_time = (ios_base + 1) / iops_limit;
3641 if (wait_time > elapsed_time) {
3642 wait_time = wait_time - elapsed_time;
3647 /* Exceeded current slice, extend it by another slice time */
3648 bs->slice_end += BLOCK_IO_SLICE_TIME;
3650 *wait = wait_time * NANOSECONDS_PER_SECOND;
3656 static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
3657 bool is_write, int64_t *wait)
3659 int64_t now, max_wait;
3660 uint64_t bps_wait = 0, iops_wait = 0;
3661 double elapsed_time;
3662 int bps_ret, iops_ret;
3664 now = qemu_get_clock_ns(vm_clock);
3665 if (now > bs->slice_end) {
3666 bs->slice_start = now;
3667 bs->slice_end = now + BLOCK_IO_SLICE_TIME;
3668 memset(&bs->slice_submitted, 0, sizeof(bs->slice_submitted));
3671 elapsed_time = now - bs->slice_start;
3672 elapsed_time /= (NANOSECONDS_PER_SECOND);
3674 bps_ret = bdrv_exceed_bps_limits(bs, nb_sectors,
3675 is_write, elapsed_time, &bps_wait);
3676 iops_ret = bdrv_exceed_iops_limits(bs, is_write,
3677 elapsed_time, &iops_wait);
3678 if (bps_ret || iops_ret) {
3679 max_wait = bps_wait > iops_wait ? bps_wait : iops_wait;
3684 now = qemu_get_clock_ns(vm_clock);
3685 if (bs->slice_end < now + max_wait) {
3686 bs->slice_end = now + max_wait;
3696 bs->slice_submitted.bytes[is_write] += (int64_t)nb_sectors *
3698 bs->slice_submitted.ios[is_write]++;
3703 /**************************************************************/
3704 /* async block device emulation */
3706 typedef struct BlockDriverAIOCBSync {
3707 BlockDriverAIOCB common;
3710 /* vector translation state */
3714 } BlockDriverAIOCBSync;
3716 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
3718 BlockDriverAIOCBSync *acb =
3719 container_of(blockacb, BlockDriverAIOCBSync, common);
3720 qemu_bh_delete(acb->bh);
3722 qemu_aio_release(acb);
3725 static const AIOCBInfo bdrv_em_aiocb_info = {
3726 .aiocb_size = sizeof(BlockDriverAIOCBSync),
3727 .cancel = bdrv_aio_cancel_em,
3730 static void bdrv_aio_bh_cb(void *opaque)
3732 BlockDriverAIOCBSync *acb = opaque;
3735 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
3736 qemu_vfree(acb->bounce);
3737 acb->common.cb(acb->common.opaque, acb->ret);
3738 qemu_bh_delete(acb->bh);
3740 qemu_aio_release(acb);
3743 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
3747 BlockDriverCompletionFunc *cb,
3752 BlockDriverAIOCBSync *acb;
3754 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
3755 acb->is_write = is_write;
3757 acb->bounce = qemu_blockalign(bs, qiov->size);
3758 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
3761 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
3762 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
3764 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
3767 qemu_bh_schedule(acb->bh);
3769 return &acb->common;
3772 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
3773 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3774 BlockDriverCompletionFunc *cb, void *opaque)
3776 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
3779 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
3780 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3781 BlockDriverCompletionFunc *cb, void *opaque)
3783 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
3787 typedef struct BlockDriverAIOCBCoroutine {
3788 BlockDriverAIOCB common;
3793 } BlockDriverAIOCBCoroutine;
3795 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
3797 BlockDriverAIOCBCoroutine *acb =
3798 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
3807 static const AIOCBInfo bdrv_em_co_aiocb_info = {
3808 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
3809 .cancel = bdrv_aio_co_cancel_em,
3812 static void bdrv_co_em_bh(void *opaque)
3814 BlockDriverAIOCBCoroutine *acb = opaque;
3816 acb->common.cb(acb->common.opaque, acb->req.error);
3822 qemu_bh_delete(acb->bh);
3823 qemu_aio_release(acb);
3826 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3827 static void coroutine_fn bdrv_co_do_rw(void *opaque)
3829 BlockDriverAIOCBCoroutine *acb = opaque;
3830 BlockDriverState *bs = acb->common.bs;
3832 if (!acb->is_write) {
3833 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
3834 acb->req.nb_sectors, acb->req.qiov, 0);
3836 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
3837 acb->req.nb_sectors, acb->req.qiov, 0);
3840 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3841 qemu_bh_schedule(acb->bh);
3844 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
3848 BlockDriverCompletionFunc *cb,
3853 BlockDriverAIOCBCoroutine *acb;
3855 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
3856 acb->req.sector = sector_num;
3857 acb->req.nb_sectors = nb_sectors;
3858 acb->req.qiov = qiov;
3859 acb->is_write = is_write;
3862 co = qemu_coroutine_create(bdrv_co_do_rw);
3863 qemu_coroutine_enter(co, acb);
3865 return &acb->common;
3868 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
3870 BlockDriverAIOCBCoroutine *acb = opaque;
3871 BlockDriverState *bs = acb->common.bs;
3873 acb->req.error = bdrv_co_flush(bs);
3874 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3875 qemu_bh_schedule(acb->bh);
3878 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
3879 BlockDriverCompletionFunc *cb, void *opaque)
3881 trace_bdrv_aio_flush(bs, opaque);
3884 BlockDriverAIOCBCoroutine *acb;
3886 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
3889 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
3890 qemu_coroutine_enter(co, acb);
3892 return &acb->common;
3895 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
3897 BlockDriverAIOCBCoroutine *acb = opaque;
3898 BlockDriverState *bs = acb->common.bs;
3900 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
3901 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
3902 qemu_bh_schedule(acb->bh);
3905 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
3906 int64_t sector_num, int nb_sectors,
3907 BlockDriverCompletionFunc *cb, void *opaque)
3910 BlockDriverAIOCBCoroutine *acb;
3912 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
3914 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
3915 acb->req.sector = sector_num;
3916 acb->req.nb_sectors = nb_sectors;
3918 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
3919 qemu_coroutine_enter(co, acb);
3921 return &acb->common;
3924 void bdrv_init(void)
3926 module_call_init(MODULE_INIT_BLOCK);
3929 void bdrv_init_with_whitelist(void)
3931 use_bdrv_whitelist = 1;
3935 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
3936 BlockDriverCompletionFunc *cb, void *opaque)
3938 BlockDriverAIOCB *acb;
3940 acb = g_slice_alloc(aiocb_info->aiocb_size);
3941 acb->aiocb_info = aiocb_info;
3944 acb->opaque = opaque;
3948 void qemu_aio_release(void *p)
3950 BlockDriverAIOCB *acb = p;
3951 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
3954 /**************************************************************/
3955 /* Coroutine block device emulation */
3957 typedef struct CoroutineIOCompletion {
3958 Coroutine *coroutine;
3960 } CoroutineIOCompletion;
3962 static void bdrv_co_io_em_complete(void *opaque, int ret)
3964 CoroutineIOCompletion *co = opaque;
3967 qemu_coroutine_enter(co->coroutine, NULL);
3970 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
3971 int nb_sectors, QEMUIOVector *iov,
3974 CoroutineIOCompletion co = {
3975 .coroutine = qemu_coroutine_self(),
3977 BlockDriverAIOCB *acb;
3980 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
3981 bdrv_co_io_em_complete, &co);
3983 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
3984 bdrv_co_io_em_complete, &co);
3987 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
3991 qemu_coroutine_yield();
3996 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
3997 int64_t sector_num, int nb_sectors,
4000 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4003 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4004 int64_t sector_num, int nb_sectors,
4007 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4010 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4012 RwCo *rwco = opaque;
4014 rwco->ret = bdrv_co_flush(rwco->bs);
4017 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4021 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4025 /* Write back cached data to the OS even with cache=unsafe */
4026 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4027 if (bs->drv->bdrv_co_flush_to_os) {
4028 ret = bs->drv->bdrv_co_flush_to_os(bs);
4034 /* But don't actually force it to the disk with cache=unsafe */
4035 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4039 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4040 if (bs->drv->bdrv_co_flush_to_disk) {
4041 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4042 } else if (bs->drv->bdrv_aio_flush) {
4043 BlockDriverAIOCB *acb;
4044 CoroutineIOCompletion co = {
4045 .coroutine = qemu_coroutine_self(),
4048 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4052 qemu_coroutine_yield();
4057 * Some block drivers always operate in either writethrough or unsafe
4058 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4059 * know how the server works (because the behaviour is hardcoded or
4060 * depends on server-side configuration), so we can't ensure that
4061 * everything is safe on disk. Returning an error doesn't work because
4062 * that would break guests even if the server operates in writethrough
4065 * Let's hope the user knows what he's doing.
4073 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4074 * in the case of cache=unsafe, so there are no useless flushes.
4077 return bdrv_co_flush(bs->file);
4080 void bdrv_invalidate_cache(BlockDriverState *bs)
4082 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4083 bs->drv->bdrv_invalidate_cache(bs);
4087 void bdrv_invalidate_cache_all(void)
4089 BlockDriverState *bs;
4091 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4092 bdrv_invalidate_cache(bs);
4096 void bdrv_clear_incoming_migration_all(void)
4098 BlockDriverState *bs;
4100 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4101 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4105 int bdrv_flush(BlockDriverState *bs)
4113 if (qemu_in_coroutine()) {
4114 /* Fast-path if already in coroutine context */
4115 bdrv_flush_co_entry(&rwco);
4117 co = qemu_coroutine_create(bdrv_flush_co_entry);
4118 qemu_coroutine_enter(co, &rwco);
4119 while (rwco.ret == NOT_DONE) {
4127 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4129 RwCo *rwco = opaque;
4131 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4134 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4139 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4141 } else if (bs->read_only) {
4145 if (bs->dirty_bitmap) {
4146 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4149 /* Do nothing if disabled. */
4150 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4154 if (bs->drv->bdrv_co_discard) {
4155 return bs->drv->bdrv_co_discard(bs, sector_num, nb_sectors);
4156 } else if (bs->drv->bdrv_aio_discard) {
4157 BlockDriverAIOCB *acb;
4158 CoroutineIOCompletion co = {
4159 .coroutine = qemu_coroutine_self(),
4162 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4163 bdrv_co_io_em_complete, &co);
4167 qemu_coroutine_yield();
4175 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4180 .sector_num = sector_num,
4181 .nb_sectors = nb_sectors,
4185 if (qemu_in_coroutine()) {
4186 /* Fast-path if already in coroutine context */
4187 bdrv_discard_co_entry(&rwco);
4189 co = qemu_coroutine_create(bdrv_discard_co_entry);
4190 qemu_coroutine_enter(co, &rwco);
4191 while (rwco.ret == NOT_DONE) {
4199 /**************************************************************/
4200 /* removable device support */
4203 * Return TRUE if the media is present
4205 int bdrv_is_inserted(BlockDriverState *bs)
4207 BlockDriver *drv = bs->drv;
4211 if (!drv->bdrv_is_inserted)
4213 return drv->bdrv_is_inserted(bs);
4217 * Return whether the media changed since the last call to this
4218 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4220 int bdrv_media_changed(BlockDriverState *bs)
4222 BlockDriver *drv = bs->drv;
4224 if (drv && drv->bdrv_media_changed) {
4225 return drv->bdrv_media_changed(bs);
4231 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4233 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4235 BlockDriver *drv = bs->drv;
4237 if (drv && drv->bdrv_eject) {
4238 drv->bdrv_eject(bs, eject_flag);
4241 if (bs->device_name[0] != '\0') {
4242 bdrv_emit_qmp_eject_event(bs, eject_flag);
4247 * Lock or unlock the media (if it is locked, the user won't be able
4248 * to eject it manually).
4250 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4252 BlockDriver *drv = bs->drv;
4254 trace_bdrv_lock_medium(bs, locked);
4256 if (drv && drv->bdrv_lock_medium) {
4257 drv->bdrv_lock_medium(bs, locked);
4261 /* needed for generic scsi interface */
4263 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4265 BlockDriver *drv = bs->drv;
4267 if (drv && drv->bdrv_ioctl)
4268 return drv->bdrv_ioctl(bs, req, buf);
4272 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4273 unsigned long int req, void *buf,
4274 BlockDriverCompletionFunc *cb, void *opaque)
4276 BlockDriver *drv = bs->drv;
4278 if (drv && drv->bdrv_aio_ioctl)
4279 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4283 void bdrv_set_buffer_alignment(BlockDriverState *bs, int align)
4285 bs->buffer_alignment = align;
4288 void *qemu_blockalign(BlockDriverState *bs, size_t size)
4290 return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size);
4294 * Check if all memory in this vector is sector aligned.
4296 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
4300 for (i = 0; i < qiov->niov; i++) {
4301 if ((uintptr_t) qiov->iov[i].iov_base % bs->buffer_alignment) {
4309 void bdrv_set_dirty_tracking(BlockDriverState *bs, int granularity)
4311 int64_t bitmap_size;
4313 assert((granularity & (granularity - 1)) == 0);
4316 granularity >>= BDRV_SECTOR_BITS;
4317 assert(!bs->dirty_bitmap);
4318 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
4319 bs->dirty_bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
4321 if (bs->dirty_bitmap) {
4322 hbitmap_free(bs->dirty_bitmap);
4323 bs->dirty_bitmap = NULL;
4328 int bdrv_get_dirty(BlockDriverState *bs, int64_t sector)
4330 if (bs->dirty_bitmap) {
4331 return hbitmap_get(bs->dirty_bitmap, sector);
4337 void bdrv_dirty_iter_init(BlockDriverState *bs, HBitmapIter *hbi)
4339 hbitmap_iter_init(hbi, bs->dirty_bitmap, 0);
4342 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
4345 hbitmap_set(bs->dirty_bitmap, cur_sector, nr_sectors);
4348 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector,
4351 hbitmap_reset(bs->dirty_bitmap, cur_sector, nr_sectors);
4354 int64_t bdrv_get_dirty_count(BlockDriverState *bs)
4356 if (bs->dirty_bitmap) {
4357 return hbitmap_count(bs->dirty_bitmap);
4363 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
4365 assert(bs->in_use != in_use);
4366 bs->in_use = in_use;
4369 int bdrv_in_use(BlockDriverState *bs)
4374 void bdrv_iostatus_enable(BlockDriverState *bs)
4376 bs->iostatus_enabled = true;
4377 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4380 /* The I/O status is only enabled if the drive explicitly
4381 * enables it _and_ the VM is configured to stop on errors */
4382 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
4384 return (bs->iostatus_enabled &&
4385 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
4386 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
4387 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
4390 void bdrv_iostatus_disable(BlockDriverState *bs)
4392 bs->iostatus_enabled = false;
4395 void bdrv_iostatus_reset(BlockDriverState *bs)
4397 if (bdrv_iostatus_is_enabled(bs)) {
4398 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4400 block_job_iostatus_reset(bs->job);
4405 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
4407 assert(bdrv_iostatus_is_enabled(bs));
4408 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
4409 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
4410 BLOCK_DEVICE_IO_STATUS_FAILED;
4415 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
4416 enum BlockAcctType type)
4418 assert(type < BDRV_MAX_IOTYPE);
4420 cookie->bytes = bytes;
4421 cookie->start_time_ns = get_clock();
4422 cookie->type = type;
4426 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
4428 assert(cookie->type < BDRV_MAX_IOTYPE);
4430 bs->nr_bytes[cookie->type] += cookie->bytes;
4431 bs->nr_ops[cookie->type]++;
4432 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
4435 void bdrv_img_create(const char *filename, const char *fmt,
4436 const char *base_filename, const char *base_fmt,
4437 char *options, uint64_t img_size, int flags,
4438 Error **errp, bool quiet)
4440 QEMUOptionParameter *param = NULL, *create_options = NULL;
4441 QEMUOptionParameter *backing_fmt, *backing_file, *size;
4442 BlockDriverState *bs = NULL;
4443 BlockDriver *drv, *proto_drv;
4444 BlockDriver *backing_drv = NULL;
4447 /* Find driver and parse its options */
4448 drv = bdrv_find_format(fmt);
4450 error_setg(errp, "Unknown file format '%s'", fmt);
4454 proto_drv = bdrv_find_protocol(filename);
4456 error_setg(errp, "Unknown protocol '%s'", filename);
4460 create_options = append_option_parameters(create_options,
4461 drv->create_options);
4462 create_options = append_option_parameters(create_options,
4463 proto_drv->create_options);
4465 /* Create parameter list with default values */
4466 param = parse_option_parameters("", create_options, param);
4468 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
4470 /* Parse -o options */
4472 param = parse_option_parameters(options, create_options, param);
4473 if (param == NULL) {
4474 error_setg(errp, "Invalid options for file format '%s'.", fmt);
4479 if (base_filename) {
4480 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
4482 error_setg(errp, "Backing file not supported for file format '%s'",
4489 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
4490 error_setg(errp, "Backing file format not supported for file "
4491 "format '%s'", fmt);
4496 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
4497 if (backing_file && backing_file->value.s) {
4498 if (!strcmp(filename, backing_file->value.s)) {
4499 error_setg(errp, "Error: Trying to create an image with the "
4500 "same filename as the backing file");
4505 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
4506 if (backing_fmt && backing_fmt->value.s) {
4507 backing_drv = bdrv_find_format(backing_fmt->value.s);
4509 error_setg(errp, "Unknown backing file format '%s'",
4510 backing_fmt->value.s);
4515 // The size for the image must always be specified, with one exception:
4516 // If we are using a backing file, we can obtain the size from there
4517 size = get_option_parameter(param, BLOCK_OPT_SIZE);
4518 if (size && size->value.n == -1) {
4519 if (backing_file && backing_file->value.s) {
4524 /* backing files always opened read-only */
4526 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
4530 ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
4533 error_setg_errno(errp, -ret, "Could not open '%s'",
4534 backing_file->value.s);
4537 bdrv_get_geometry(bs, &size);
4540 snprintf(buf, sizeof(buf), "%" PRId64, size);
4541 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
4543 error_setg(errp, "Image creation needs a size parameter");
4549 printf("Formatting '%s', fmt=%s ", filename, fmt);
4550 print_option_parameters(param);
4553 ret = bdrv_create(drv, filename, param);
4555 if (ret == -ENOTSUP) {
4556 error_setg(errp,"Formatting or formatting option not supported for "
4557 "file format '%s'", fmt);
4558 } else if (ret == -EFBIG) {
4559 const char *cluster_size_hint = "";
4560 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
4561 cluster_size_hint = " (try using a larger cluster size)";
4563 error_setg(errp, "The image size is too large for file format '%s'%s",
4564 fmt, cluster_size_hint);
4566 error_setg(errp, "%s: error while creating %s: %s", filename, fmt,
4572 free_option_parameters(create_options);
4573 free_option_parameters(param);
4580 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
4582 /* Currently BlockDriverState always uses the main loop AioContext */
4583 return qemu_get_aio_context();
4586 void bdrv_add_before_write_notifier(BlockDriverState *bs,
4587 NotifierWithReturn *notifier)
4589 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);