2 * Motorola ColdFire MCF5208 SoC emulation.
4 * Copyright (c) 2007 CodeSourcery.
6 * This code is licensed under the GPL
9 #include "qemu/osdep.h"
10 #include "qemu/units.h"
11 #include "qemu/error-report.h"
12 #include "qapi/error.h"
13 #include "qemu-common.h"
17 #include "hw/m68k/mcf.h"
18 #include "hw/m68k/mcf_fec.h"
19 #include "qemu/timer.h"
20 #include "hw/ptimer.h"
21 #include "sysemu/sysemu.h"
22 #include "sysemu/qtest.h"
24 #include "hw/boards.h"
25 #include "hw/loader.h"
26 #include "hw/sysbus.h"
28 #include "exec/address-spaces.h"
30 #define SYS_FREQ 166666666
32 #define ROM_SIZE 0x200000
34 #define PCSR_EN 0x0001
35 #define PCSR_RLD 0x0002
36 #define PCSR_PIF 0x0004
37 #define PCSR_PIE 0x0008
38 #define PCSR_OVW 0x0010
39 #define PCSR_DBG 0x0020
40 #define PCSR_DOZE 0x0040
41 #define PCSR_PRE_SHIFT 8
42 #define PCSR_PRE_MASK 0x0f00
53 static void m5208_timer_update(m5208_timer_state *s)
55 if ((s->pcsr & (PCSR_PIE | PCSR_PIF)) == (PCSR_PIE | PCSR_PIF))
56 qemu_irq_raise(s->irq);
58 qemu_irq_lower(s->irq);
61 static void m5208_timer_write(void *opaque, hwaddr offset,
62 uint64_t value, unsigned size)
64 m5208_timer_state *s = (m5208_timer_state *)opaque;
69 /* The PIF bit is set-to-clear. */
70 if (value & PCSR_PIF) {
74 /* Avoid frobbing the timer if we're just twiddling IRQ bits. */
75 if (((s->pcsr ^ value) & ~PCSR_PIE) == 0) {
77 m5208_timer_update(s);
81 ptimer_transaction_begin(s->timer);
82 if (s->pcsr & PCSR_EN)
83 ptimer_stop(s->timer);
87 prescale = 1 << ((s->pcsr & PCSR_PRE_MASK) >> PCSR_PRE_SHIFT);
88 ptimer_set_freq(s->timer, (SYS_FREQ / 2) / prescale);
89 if (s->pcsr & PCSR_RLD)
93 ptimer_set_limit(s->timer, limit, 0);
95 if (s->pcsr & PCSR_EN)
96 ptimer_run(s->timer, 0);
97 ptimer_transaction_commit(s->timer);
100 ptimer_transaction_begin(s->timer);
102 s->pcsr &= ~PCSR_PIF;
103 if ((s->pcsr & PCSR_RLD) == 0) {
104 if (s->pcsr & PCSR_OVW)
105 ptimer_set_count(s->timer, value);
107 ptimer_set_limit(s->timer, value, s->pcsr & PCSR_OVW);
109 ptimer_transaction_commit(s->timer);
114 hw_error("m5208_timer_write: Bad offset 0x%x\n", (int)offset);
117 m5208_timer_update(s);
120 static void m5208_timer_trigger(void *opaque)
122 m5208_timer_state *s = (m5208_timer_state *)opaque;
124 m5208_timer_update(s);
127 static uint64_t m5208_timer_read(void *opaque, hwaddr addr,
130 m5208_timer_state *s = (m5208_timer_state *)opaque;
137 return ptimer_get_count(s->timer);
139 hw_error("m5208_timer_read: Bad offset 0x%x\n", (int)addr);
144 static const MemoryRegionOps m5208_timer_ops = {
145 .read = m5208_timer_read,
146 .write = m5208_timer_write,
147 .endianness = DEVICE_NATIVE_ENDIAN,
150 static uint64_t m5208_sys_read(void *opaque, hwaddr addr,
154 case 0x110: /* SDCS0 */
157 for (n = 0; n < 32; n++) {
158 if (ram_size < (2u << n))
161 return (n - 1) | 0x40000000;
163 case 0x114: /* SDCS1 */
167 hw_error("m5208_sys_read: Bad offset 0x%x\n", (int)addr);
172 static void m5208_sys_write(void *opaque, hwaddr addr,
173 uint64_t value, unsigned size)
175 hw_error("m5208_sys_write: Bad offset 0x%x\n", (int)addr);
178 static const MemoryRegionOps m5208_sys_ops = {
179 .read = m5208_sys_read,
180 .write = m5208_sys_write,
181 .endianness = DEVICE_NATIVE_ENDIAN,
184 static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic)
186 MemoryRegion *iomem = g_new(MemoryRegion, 1);
187 m5208_timer_state *s;
191 memory_region_init_io(iomem, NULL, &m5208_sys_ops, NULL, "m5208-sys", 0x00004000);
192 memory_region_add_subregion(address_space, 0xfc0a8000, iomem);
194 for (i = 0; i < 2; i++) {
195 s = g_new0(m5208_timer_state, 1);
196 s->timer = ptimer_init(m5208_timer_trigger, s, PTIMER_POLICY_DEFAULT);
197 memory_region_init_io(&s->iomem, NULL, &m5208_timer_ops, s,
198 "m5208-timer", 0x00004000);
199 memory_region_add_subregion(address_space, 0xfc080000 + 0x4000 * i,
205 static void mcf_fec_init(MemoryRegion *sysmem, NICInfo *nd, hwaddr base,
212 qemu_check_nic_model(nd, TYPE_MCF_FEC_NET);
213 dev = qdev_create(NULL, TYPE_MCF_FEC_NET);
214 qdev_set_nic_properties(dev, nd);
215 qdev_init_nofail(dev);
217 s = SYS_BUS_DEVICE(dev);
218 for (i = 0; i < FEC_NUM_IRQ; i++) {
219 sysbus_connect_irq(s, i, irqs[i]);
222 memory_region_add_subregion(sysmem, base, sysbus_mmio_get_region(s, 0));
225 static void mcf5208evb_init(MachineState *machine)
227 ram_addr_t ram_size = machine->ram_size;
228 const char *kernel_filename = machine->kernel_filename;
235 MemoryRegion *address_space_mem = get_system_memory();
236 MemoryRegion *rom = g_new(MemoryRegion, 1);
237 MemoryRegion *ram = g_new(MemoryRegion, 1);
238 MemoryRegion *sram = g_new(MemoryRegion, 1);
240 cpu = M68K_CPU(cpu_create(machine->cpu_type));
243 /* Initialize CPU registers. */
245 /* TODO: Configure BARs. */
247 /* ROM at 0x00000000 */
248 memory_region_init_rom(rom, NULL, "mcf5208.rom", ROM_SIZE, &error_fatal);
249 memory_region_add_subregion(address_space_mem, 0x00000000, rom);
251 /* DRAM at 0x40000000 */
252 memory_region_allocate_system_memory(ram, NULL, "mcf5208.ram", ram_size);
253 memory_region_add_subregion(address_space_mem, 0x40000000, ram);
256 memory_region_init_ram(sram, NULL, "mcf5208.sram", 16 * KiB, &error_fatal);
257 memory_region_add_subregion(address_space_mem, 0x80000000, sram);
259 /* Internal peripherals. */
260 pic = mcf_intc_init(address_space_mem, 0xfc048000, cpu);
262 mcf_uart_mm_init(0xfc060000, pic[26], serial_hd(0));
263 mcf_uart_mm_init(0xfc064000, pic[27], serial_hd(1));
264 mcf_uart_mm_init(0xfc068000, pic[28], serial_hd(2));
266 mcf5208_sys_init(address_space_mem, pic);
269 error_report("Too many NICs");
272 if (nd_table[0].used) {
273 mcf_fec_init(address_space_mem, &nd_table[0],
274 0xfc030000, pic + 36);
279 /* 0xfc000000 SCM. */
280 /* 0xfc004000 XBS. */
281 /* 0xfc008000 FlexBus CS. */
282 /* 0xfc030000 FEC. */
283 /* 0xfc040000 SCM + Power management. */
284 /* 0xfc044000 eDMA. */
285 /* 0xfc048000 INTC. */
286 /* 0xfc058000 I2C. */
287 /* 0xfc05c000 QSPI. */
288 /* 0xfc060000 UART0. */
289 /* 0xfc064000 UART0. */
290 /* 0xfc068000 UART0. */
291 /* 0xfc070000 DMA timers. */
292 /* 0xfc080000 PIT0. */
293 /* 0xfc084000 PIT1. */
294 /* 0xfc088000 EPORT. */
295 /* 0xfc08c000 Watchdog. */
296 /* 0xfc090000 clock module. */
297 /* 0xfc0a0000 CCM + reset. */
298 /* 0xfc0a4000 GPIO. */
299 /* 0xfc0a8000 SDRAM controller. */
306 fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
308 error_report("Could not find ROM image '%s'", bios_name);
311 if (load_image_targphys(fn, 0x0, ROM_SIZE) < 8) {
312 error_report("Could not load ROM image '%s'", bios_name);
316 /* Initial PC is always at offset 4 in firmware binaries */
317 ptr = rom_ptr(0x4, 4);
319 env->pc = ldl_p(ptr);
323 if (!kernel_filename) {
324 if (qtest_enabled() || bios_name) {
327 error_report("Kernel image must be specified");
331 kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, &elf_entry,
332 NULL, NULL, 1, EM_68K, 0, 0);
334 if (kernel_size < 0) {
335 kernel_size = load_uimage(kernel_filename, &entry, NULL, NULL,
338 if (kernel_size < 0) {
339 kernel_size = load_image_targphys(kernel_filename, 0x40000000,
343 if (kernel_size < 0) {
344 error_report("Could not load kernel '%s'", kernel_filename);
351 static void mcf5208evb_machine_init(MachineClass *mc)
353 mc->desc = "MCF5208EVB";
354 mc->init = mcf5208evb_init;
356 mc->default_cpu_type = M68K_CPU_TYPE_NAME("m5208");
359 DEFINE_MACHINE("mcf5208evb", mcf5208evb_machine_init)