hw/usb/dev-uas.c

   1 /*
   2  * UAS (USB Attached SCSI) emulation
   3  *
   4  * Copyright Red Hat, Inc. 2012
   5  *
   6  * Author: Gerd Hoffmann <[email protected]>
   7  *
   8  * This work is licensed under the terms of the GNU GPL, version 2 or later.
   9  * See the COPYING file in the top-level directory.
  10  */
  11
  12 #include "qemu/osdep.h"
  13 #include "qemu-common.h"
  14 #include "qemu/option.h"
  15 #include "qemu/config-file.h"
  16 #include "trace.h"
  17 #include "qemu/error-report.h"
  18
  19 #include "hw/usb.h"
  20 #include "desc.h"
  21 #include "hw/scsi/scsi.h"
  22 #include "scsi/constants.h"
  23
  24 /* --------------------------------------------------------------------- */
  25
  26 #define UAS_UI_COMMAND              0x01
  27 #define UAS_UI_SENSE                0x03
  28 #define UAS_UI_RESPONSE             0x04
  29 #define UAS_UI_TASK_MGMT            0x05
  30 #define UAS_UI_READ_READY           0x06
  31 #define UAS_UI_WRITE_READY          0x07
  32
  33 #define UAS_RC_TMF_COMPLETE         0x00
  34 #define UAS_RC_INVALID_INFO_UNIT    0x02
  35 #define UAS_RC_TMF_NOT_SUPPORTED    0x04
  36 #define UAS_RC_TMF_FAILED           0x05
  37 #define UAS_RC_TMF_SUCCEEDED        0x08
  38 #define UAS_RC_INCORRECT_LUN        0x09
  39 #define UAS_RC_OVERLAPPED_TAG       0x0a
  40
  41 #define UAS_TMF_ABORT_TASK          0x01
  42 #define UAS_TMF_ABORT_TASK_SET      0x02
  43 #define UAS_TMF_CLEAR_TASK_SET      0x04
  44 #define UAS_TMF_LOGICAL_UNIT_RESET  0x08
  45 #define UAS_TMF_I_T_NEXUS_RESET     0x10
  46 #define UAS_TMF_CLEAR_ACA           0x40
  47 #define UAS_TMF_QUERY_TASK          0x80
  48 #define UAS_TMF_QUERY_TASK_SET      0x81
  49 #define UAS_TMF_QUERY_ASYNC_EVENT   0x82
  50
  51 #define UAS_PIPE_ID_COMMAND         0x01
  52 #define UAS_PIPE_ID_STATUS          0x02
  53 #define UAS_PIPE_ID_DATA_IN         0x03
  54 #define UAS_PIPE_ID_DATA_OUT        0x04
  55
  56 typedef struct {
  57     uint8_t    id;
  58     uint8_t    reserved;
  59     uint16_t   tag;
  60 } QEMU_PACKED  uas_iu_header;
  61
  62 typedef struct {
  63     uint8_t    prio_taskattr;   /* 6:3 priority, 2:0 task attribute   */
  64     uint8_t    reserved_1;
  65     uint8_t    add_cdb_length;  /* 7:2 additional adb length (dwords) */
  66     uint8_t    reserved_2;
  67     uint64_t   lun;
  68     uint8_t    cdb[16];
  69     uint8_t    add_cdb[];
  70 } QEMU_PACKED  uas_iu_command;
  71
  72 typedef struct {
  73     uint16_t   status_qualifier;
  74     uint8_t    status;
  75     uint8_t    reserved[7];
  76     uint16_t   sense_length;
  77     uint8_t    sense_data[18];
  78 } QEMU_PACKED  uas_iu_sense;
  79
  80 typedef struct {
  81     uint8_t    add_response_info[3];
  82     uint8_t    response_code;
  83 } QEMU_PACKED  uas_iu_response;
  84
  85 typedef struct {
  86     uint8_t    function;
  87     uint8_t    reserved;
  88     uint16_t   task_tag;
  89     uint64_t   lun;
  90 } QEMU_PACKED  uas_iu_task_mgmt;
  91
  92 typedef struct {
  93     uas_iu_header  hdr;
  94     union {
  95         uas_iu_command   command;
  96         uas_iu_sense     sense;
  97         uas_iu_task_mgmt task;
  98         uas_iu_response  response;
  99     };
 100 } QEMU_PACKED  uas_iu;
 101
 102 /* --------------------------------------------------------------------- */
 103
 104 #define UAS_STREAM_BM_ATTR  4
 105 #define UAS_MAX_STREAMS     (1 << UAS_STREAM_BM_ATTR)
 106
 107 typedef struct UASDevice UASDevice;
 108 typedef struct UASRequest UASRequest;
 109 typedef struct UASStatus UASStatus;
 110
 111 struct UASDevice {
 112     USBDevice                 dev;
 113     SCSIBus                   bus;
 114     QEMUBH                    *status_bh;
 115     QTAILQ_HEAD(, UASStatus)  results;
 116     QTAILQ_HEAD(, UASRequest) requests;
 117
 118     /* properties */
 119     uint32_t                  requestlog;
 120
 121     /* usb 2.0 only */
 122     USBPacket                 *status2;
 123     UASRequest                *datain2;
 124     UASRequest                *dataout2;
 125
 126     /* usb 3.0 only */
 127     USBPacket                 *data3[UAS_MAX_STREAMS + 1];
 128     USBPacket                 *status3[UAS_MAX_STREAMS + 1];
 129 };
 130
 131 #define TYPE_USB_UAS "usb-uas"
 132 #define USB_UAS(obj) OBJECT_CHECK(UASDevice, (obj), TYPE_USB_UAS)
 133
 134 struct UASRequest {
 135     uint16_t     tag;
 136     uint64_t     lun;
 137     UASDevice    *uas;
 138     SCSIDevice   *dev;
 139     SCSIRequest  *req;
 140     USBPacket    *data;
 141     bool         data_async;
 142     bool         active;
 143     bool         complete;
 144     uint32_t     buf_off;
 145     uint32_t     buf_size;
 146     uint32_t     data_off;
 147     uint32_t     data_size;
 148     QTAILQ_ENTRY(UASRequest)  next;
 149 };
 150
 151 struct UASStatus {
 152     uint32_t                  stream;
 153     uas_iu                    status;
 154     uint32_t                  length;
 155     QTAILQ_ENTRY(UASStatus)   next;
 156 };
 157
 158 /* --------------------------------------------------------------------- */
 159
 160 enum {
 161     STR_MANUFACTURER = 1,
 162     STR_PRODUCT,
 163     STR_SERIALNUMBER,
 164     STR_CONFIG_HIGH,
 165     STR_CONFIG_SUPER,
 166 };
 167
 168 static const USBDescStrings desc_strings = {
 169     [STR_MANUFACTURER] = "QEMU",
 170     [STR_PRODUCT]      = "USB Attached SCSI HBA",
 171     [STR_SERIALNUMBER] = "27842",
 172     [STR_CONFIG_HIGH]  = "High speed config (usb 2.0)",
 173     [STR_CONFIG_SUPER] = "Super speed config (usb 3.0)",
 174 };
 175
 176 static const USBDescIface desc_iface_high = {
 177     .bInterfaceNumber              = 0,
 178     .bNumEndpoints                 = 4,
 179     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
 180     .bInterfaceSubClass            = 0x06, /* SCSI */
 181     .bInterfaceProtocol            = 0x62, /* UAS  */
 182     .eps = (USBDescEndpoint[]) {
 183         {
 184             .bEndpointAddress      = USB_DIR_OUT | UAS_PIPE_ID_COMMAND,
 185             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 186             .wMaxPacketSize        = 512,
 187             .extra = (uint8_t[]) {
 188                 0x04,  /*  u8  bLength */
 189                 0x24,  /*  u8  bDescriptorType */
 190                 UAS_PIPE_ID_COMMAND,
 191                 0x00,  /*  u8  bReserved */
 192             },
 193         },{
 194             .bEndpointAddress      = USB_DIR_IN | UAS_PIPE_ID_STATUS,
 195             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 196             .wMaxPacketSize        = 512,
 197             .extra = (uint8_t[]) {
 198                 0x04,  /*  u8  bLength */
 199                 0x24,  /*  u8  bDescriptorType */
 200                 UAS_PIPE_ID_STATUS,
 201                 0x00,  /*  u8  bReserved */
 202             },
 203         },{
 204             .bEndpointAddress      = USB_DIR_IN | UAS_PIPE_ID_DATA_IN,
 205             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 206             .wMaxPacketSize        = 512,
 207             .extra = (uint8_t[]) {
 208                 0x04,  /*  u8  bLength */
 209                 0x24,  /*  u8  bDescriptorType */
 210                 UAS_PIPE_ID_DATA_IN,
 211                 0x00,  /*  u8  bReserved */
 212             },
 213         },{
 214             .bEndpointAddress      = USB_DIR_OUT | UAS_PIPE_ID_DATA_OUT,
 215             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 216             .wMaxPacketSize        = 512,
 217             .extra = (uint8_t[]) {
 218                 0x04,  /*  u8  bLength */
 219                 0x24,  /*  u8  bDescriptorType */
 220                 UAS_PIPE_ID_DATA_OUT,
 221                 0x00,  /*  u8  bReserved */
 222             },
 223         },
 224     }
 225 };
 226
 227 static const USBDescIface desc_iface_super = {
 228     .bInterfaceNumber              = 0,
 229     .bNumEndpoints                 = 4,
 230     .bInterfaceClass               = USB_CLASS_MASS_STORAGE,
 231     .bInterfaceSubClass            = 0x06, /* SCSI */
 232     .bInterfaceProtocol            = 0x62, /* UAS  */
 233     .eps = (USBDescEndpoint[]) {
 234         {
 235             .bEndpointAddress      = USB_DIR_OUT | UAS_PIPE_ID_COMMAND,
 236             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 237             .wMaxPacketSize        = 1024,
 238             .bMaxBurst             = 15,
 239             .extra = (uint8_t[]) {
 240                 0x04,  /*  u8  bLength */
 241                 0x24,  /*  u8  bDescriptorType */
 242                 UAS_PIPE_ID_COMMAND,
 243                 0x00,  /*  u8  bReserved */
 244             },
 245         },{
 246             .bEndpointAddress      = USB_DIR_IN | UAS_PIPE_ID_STATUS,
 247             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 248             .wMaxPacketSize        = 1024,
 249             .bMaxBurst             = 15,
 250             .bmAttributes_super    = UAS_STREAM_BM_ATTR,
 251             .extra = (uint8_t[]) {
 252                 0x04,  /*  u8  bLength */
 253                 0x24,  /*  u8  bDescriptorType */
 254                 UAS_PIPE_ID_STATUS,
 255                 0x00,  /*  u8  bReserved */
 256             },
 257         },{
 258             .bEndpointAddress      = USB_DIR_IN | UAS_PIPE_ID_DATA_IN,
 259             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 260             .wMaxPacketSize        = 1024,
 261             .bMaxBurst             = 15,
 262             .bmAttributes_super    = UAS_STREAM_BM_ATTR,
 263             .extra = (uint8_t[]) {
 264                 0x04,  /*  u8  bLength */
 265                 0x24,  /*  u8  bDescriptorType */
 266                 UAS_PIPE_ID_DATA_IN,
 267                 0x00,  /*  u8  bReserved */
 268             },
 269         },{
 270             .bEndpointAddress      = USB_DIR_OUT | UAS_PIPE_ID_DATA_OUT,
 271             .bmAttributes          = USB_ENDPOINT_XFER_BULK,
 272             .wMaxPacketSize        = 1024,
 273             .bMaxBurst             = 15,
 274             .bmAttributes_super    = UAS_STREAM_BM_ATTR,
 275             .extra = (uint8_t[]) {
 276                 0x04,  /*  u8  bLength */
 277                 0x24,  /*  u8  bDescriptorType */
 278                 UAS_PIPE_ID_DATA_OUT,
 279                 0x00,  /*  u8  bReserved */
 280             },
 281         },
 282     }
 283 };
 284
 285 static const USBDescDevice desc_device_high = {
 286     .bcdUSB                        = 0x0200,
 287     .bMaxPacketSize0               = 64,
 288     .bNumConfigurations            = 1,
 289     .confs = (USBDescConfig[]) {
 290         {
 291             .bNumInterfaces        = 1,
 292             .bConfigurationValue   = 1,
 293             .iConfiguration        = STR_CONFIG_HIGH,
 294             .bmAttributes          = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER,
 295             .nif = 1,
 296             .ifs = &desc_iface_high,
 297         },
 298     },
 299 };
 300
 301 static const USBDescDevice desc_device_super = {
 302     .bcdUSB                        = 0x0300,
 303     .bMaxPacketSize0               = 64,
 304     .bNumConfigurations            = 1,
 305     .confs = (USBDescConfig[]) {
 306         {
 307             .bNumInterfaces        = 1,
 308             .bConfigurationValue   = 1,
 309             .iConfiguration        = STR_CONFIG_SUPER,
 310             .bmAttributes          = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER,
 311             .nif = 1,
 312             .ifs = &desc_iface_super,
 313         },
 314     },
 315 };
 316
 317 static const USBDesc desc = {
 318     .id = {
 319         .idVendor          = 0x46f4, /* CRC16() of "QEMU" */
 320         .idProduct         = 0x0003,
 321         .bcdDevice         = 0,
 322         .iManufacturer     = STR_MANUFACTURER,
 323         .iProduct          = STR_PRODUCT,
 324         .iSerialNumber     = STR_SERIALNUMBER,
 325     },
 326     .high  = &desc_device_high,
 327     .super = &desc_device_super,
 328     .str   = desc_strings,
 329 };
 330
 331 /* --------------------------------------------------------------------- */
 332
 333 static bool uas_using_streams(UASDevice *uas)
 334 {
 335     return uas->dev.speed == USB_SPEED_SUPER;
 336 }
 337
 338 /* --------------------------------------------------------------------- */
 339
 340 static UASStatus *usb_uas_alloc_status(UASDevice *uas, uint8_t id, uint16_t tag)
 341 {
 342     UASStatus *st = g_new0(UASStatus, 1);
 343
 344     st->status.hdr.id = id;
 345     st->status.hdr.tag = cpu_to_be16(tag);
 346     st->length = sizeof(uas_iu_header);
 347     if (uas_using_streams(uas)) {
 348         st->stream = tag;
 349     }
 350     return st;
 351 }
 352
 353 static void usb_uas_send_status_bh(void *opaque)
 354 {
 355     UASDevice *uas = opaque;
 356     UASStatus *st;
 357     USBPacket *p;
 358
 359     while ((st = QTAILQ_FIRST(&uas->results)) != NULL) {
 360         if (uas_using_streams(uas)) {
 361             p = uas->status3[st->stream];
 362             uas->status3[st->stream] = NULL;
 363         } else {
 364             p = uas->status2;
 365             uas->status2 = NULL;
 366         }
 367         if (p == NULL) {
 368             break;
 369         }
 370
 371         usb_packet_copy(p, &st->status, st->length);
 372         QTAILQ_REMOVE(&uas->results, st, next);
 373         g_free(st);
 374
 375         p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
 376         usb_packet_complete(&uas->dev, p);
 377     }
 378 }
 379
 380 static void usb_uas_queue_status(UASDevice *uas, UASStatus *st, int length)
 381 {
 382     USBPacket *p = uas_using_streams(uas) ?
 383         uas->status3[st->stream] : uas->status2;
 384
 385     st->length += length;
 386     QTAILQ_INSERT_TAIL(&uas->results, st, next);
 387     if (p) {
 388         /*
 389          * Just schedule bh make sure any in-flight data transaction
 390          * is finished before completing (sending) the status packet.
 391          */
 392         qemu_bh_schedule(uas->status_bh);
 393     } else {
 394         USBEndpoint *ep = usb_ep_get(&uas->dev, USB_TOKEN_IN,
 395                                      UAS_PIPE_ID_STATUS);
 396         usb_wakeup(ep, st->stream);
 397     }
 398 }
 399
 400 static void usb_uas_queue_response(UASDevice *uas, uint16_t tag, uint8_t code)
 401 {
 402     UASStatus *st = usb_uas_alloc_status(uas, UAS_UI_RESPONSE, tag);
 403
 404     trace_usb_uas_response(uas->dev.addr, tag, code);
 405     st->status.response.response_code = code;
 406     usb_uas_queue_status(uas, st, sizeof(uas_iu_response));
 407 }
 408
 409 static void usb_uas_queue_sense(UASRequest *req, uint8_t status)
 410 {
 411     UASStatus *st = usb_uas_alloc_status(req->uas, UAS_UI_SENSE, req->tag);
 412     int len, slen = 0;
 413
 414     trace_usb_uas_sense(req->uas->dev.addr, req->tag, status);
 415     st->status.sense.status = status;
 416     st->status.sense.status_qualifier = cpu_to_be16(0);
 417     if (status != GOOD) {
 418         slen = scsi_req_get_sense(req->req, st->status.sense.sense_data,
 419                                   sizeof(st->status.sense.sense_data));
 420         st->status.sense.sense_length = cpu_to_be16(slen);
 421     }
 422     len = sizeof(uas_iu_sense) - sizeof(st->status.sense.sense_data) + slen;
 423     usb_uas_queue_status(req->uas, st, len);
 424 }
 425
 426 static void usb_uas_queue_fake_sense(UASDevice *uas, uint16_t tag,
 427                                      struct SCSISense sense)
 428 {
 429     UASStatus *st = usb_uas_alloc_status(uas, UAS_UI_SENSE, tag);
 430     int len, slen = 0;
 431
 432     st->status.sense.status = CHECK_CONDITION;
 433     st->status.sense.status_qualifier = cpu_to_be16(0);
 434     st->status.sense.sense_data[0] = 0x70;
 435     st->status.sense.sense_data[2] = sense.key;
 436     st->status.sense.sense_data[7] = 10;
 437     st->status.sense.sense_data[12] = sense.asc;
 438     st->status.sense.sense_data[13] = sense.ascq;
 439     slen = 18;
 440     len = sizeof(uas_iu_sense) - sizeof(st->status.sense.sense_data) + slen;
 441     usb_uas_queue_status(uas, st, len);
 442 }
 443
 444 static void usb_uas_queue_read_ready(UASRequest *req)
 445 {
 446     UASStatus *st = usb_uas_alloc_status(req->uas, UAS_UI_READ_READY,
 447                                          req->tag);
 448
 449     trace_usb_uas_read_ready(req->uas->dev.addr, req->tag);
 450     usb_uas_queue_status(req->uas, st, 0);
 451 }
 452
 453 static void usb_uas_queue_write_ready(UASRequest *req)
 454 {
 455     UASStatus *st = usb_uas_alloc_status(req->uas, UAS_UI_WRITE_READY,
 456                                          req->tag);
 457
 458     trace_usb_uas_write_ready(req->uas->dev.addr, req->tag);
 459     usb_uas_queue_status(req->uas, st, 0);
 460 }
 461
 462 /* --------------------------------------------------------------------- */
 463
 464 static int usb_uas_get_lun(uint64_t lun64)
 465 {
 466     return (lun64 >> 48) & 0xff;
 467 }
 468
 469 static SCSIDevice *usb_uas_get_dev(UASDevice *uas, uint64_t lun64)
 470 {
 471     if ((lun64 >> 56) != 0x00) {
 472         return NULL;
 473     }
 474     return scsi_device_find(&uas->bus, 0, 0, usb_uas_get_lun(lun64));
 475 }
 476
 477 static void usb_uas_complete_data_packet(UASRequest *req)
 478 {
 479     USBPacket *p;
 480
 481     if (!req->data_async) {
 482         return;
 483     }
 484     p = req->data;
 485     req->data = NULL;
 486     req->data_async = false;
 487     p->status = USB_RET_SUCCESS; /* Clear previous ASYNC status */
 488     usb_packet_complete(&req->uas->dev, p);
 489 }
 490
 491 static void usb_uas_copy_data(UASRequest *req)
 492 {
 493     uint32_t length;
 494
 495     length = MIN(req->buf_size - req->buf_off,
 496                  req->data->iov.size - req->data->actual_length);
 497     trace_usb_uas_xfer_data(req->uas->dev.addr, req->tag, length,
 498                             req->data->actual_length, req->data->iov.size,
 499                             req->buf_off, req->buf_size);
 500     usb_packet_copy(req->data, scsi_req_get_buf(req->req) + req->buf_off,
 501                     length);
 502     req->buf_off += length;
 503     req->data_off += length;
 504
 505     if (req->data->actual_length == req->data->iov.size) {
 506         usb_uas_complete_data_packet(req);
 507     }
 508     if (req->buf_size && req->buf_off == req->buf_size) {
 509         req->buf_off = 0;
 510         req->buf_size = 0;
 511         scsi_req_continue(req->req);
 512     }
 513 }
 514
 515 static void usb_uas_start_next_transfer(UASDevice *uas)
 516 {
 517     UASRequest *req;
 518
 519     if (uas_using_streams(uas)) {
 520         return;
 521     }
 522
 523     QTAILQ_FOREACH(req, &uas->requests, next) {
 524         if (req->active || req->complete) {
 525             continue;
 526         }
 527         if (req->req->cmd.mode == SCSI_XFER_FROM_DEV && uas->datain2 == NULL) {
 528             uas->datain2 = req;
 529             usb_uas_queue_read_ready(req);
 530             req->active = true;
 531             return;
 532         }
 533         if (req->req->cmd.mode == SCSI_XFER_TO_DEV && uas->dataout2 == NULL) {
 534             uas->dataout2 = req;
 535             usb_uas_queue_write_ready(req);
 536             req->active = true;
 537             return;
 538         }
 539     }
 540 }
 541
 542 static UASRequest *usb_uas_alloc_request(UASDevice *uas, uas_iu *iu)
 543 {
 544     UASRequest *req;
 545
 546     req = g_new0(UASRequest, 1);
 547     req->uas = uas;
 548     req->tag = be16_to_cpu(iu->hdr.tag);
 549     req->lun = be64_to_cpu(iu->command.lun);
 550     req->dev = usb_uas_get_dev(req->uas, req->lun);
 551     return req;
 552 }
 553
 554 static void usb_uas_scsi_free_request(SCSIBus *bus, void *priv)
 555 {
 556     UASRequest *req = priv;
 557     UASDevice *uas = req->uas;
 558
 559     if (req == uas->datain2) {
 560         uas->datain2 = NULL;
 561     }
 562     if (req == uas->dataout2) {
 563         uas->dataout2 = NULL;
 564     }
 565     QTAILQ_REMOVE(&uas->requests, req, next);
 566     g_free(req);
 567     usb_uas_start_next_transfer(uas);
 568 }
 569
 570 static UASRequest *usb_uas_find_request(UASDevice *uas, uint16_t tag)
 571 {
 572     UASRequest *req;
 573
 574     QTAILQ_FOREACH(req, &uas->requests, next) {
 575         if (req->tag == tag) {
 576             return req;
 577         }
 578     }
 579     return NULL;
 580 }
 581
 582 static void usb_uas_scsi_transfer_data(SCSIRequest *r, uint32_t len)
 583 {
 584     UASRequest *req = r->hba_private;
 585
 586     trace_usb_uas_scsi_data(req->uas->dev.addr, req->tag, len);
 587     req->buf_off = 0;
 588     req->buf_size = len;
 589     if (req->data) {
 590         usb_uas_copy_data(req);
 591     } else {
 592         usb_uas_start_next_transfer(req->uas);
 593     }
 594 }
 595
 596 static void usb_uas_scsi_command_complete(SCSIRequest *r,
 597                                           uint32_t status, size_t resid)
 598 {
 599     UASRequest *req = r->hba_private;
 600
 601     trace_usb_uas_scsi_complete(req->uas->dev.addr, req->tag, status, resid);
 602     req->complete = true;
 603     if (req->data) {
 604         usb_uas_complete_data_packet(req);
 605     }
 606     usb_uas_queue_sense(req, status);
 607     scsi_req_unref(req->req);
 608 }
 609
 610 static void usb_uas_scsi_request_cancelled(SCSIRequest *r)
 611 {
 612     UASRequest *req = r->hba_private;
 613
 614     /* FIXME: queue notification to status pipe? */
 615     scsi_req_unref(req->req);
 616 }
 617
 618 static const struct SCSIBusInfo usb_uas_scsi_info = {
 619     .tcq = true,
 620     .max_target = 0,
 621     .max_lun = 255,
 622
 623     .transfer_data = usb_uas_scsi_transfer_data,
 624     .complete = usb_uas_scsi_command_complete,
 625     .cancel = usb_uas_scsi_request_cancelled,
 626     .free_request = usb_uas_scsi_free_request,
 627 };
 628
 629 /* --------------------------------------------------------------------- */
 630
 631 static void usb_uas_handle_reset(USBDevice *dev)
 632 {
 633     UASDevice *uas = USB_UAS(dev);
 634     UASRequest *req, *nreq;
 635     UASStatus *st, *nst;
 636
 637     trace_usb_uas_reset(dev->addr);
 638     QTAILQ_FOREACH_SAFE(req, &uas->requests, next, nreq) {
 639         scsi_req_cancel(req->req);
 640     }
 641     QTAILQ_FOREACH_SAFE(st, &uas->results, next, nst) {
 642         QTAILQ_REMOVE(&uas->results, st, next);
 643         g_free(st);
 644     }
 645 }
 646
 647 static void usb_uas_handle_control(USBDevice *dev, USBPacket *p,
 648                int request, int value, int index, int length, uint8_t *data)
 649 {
 650     int ret;
 651
 652     ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
 653     if (ret >= 0) {
 654         return;
 655     }
 656     error_report("%s: unhandled control request (req 0x%x, val 0x%x, idx 0x%x",
 657                  __func__, request, value, index);
 658     p->status = USB_RET_STALL;
 659 }
 660
 661 static void usb_uas_cancel_io(USBDevice *dev, USBPacket *p)
 662 {
 663     UASDevice *uas = USB_UAS(dev);
 664     UASRequest *req, *nreq;
 665     int i;
 666
 667     if (uas->status2 == p) {
 668         uas->status2 = NULL;
 669         qemu_bh_cancel(uas->status_bh);
 670         return;
 671     }
 672     if (uas_using_streams(uas)) {
 673         for (i = 0; i <= UAS_MAX_STREAMS; i++) {
 674             if (uas->status3[i] == p) {
 675                 uas->status3[i] = NULL;
 676                 return;
 677             }
 678             if (uas->data3[i] == p) {
 679                 uas->data3[i] = NULL;
 680                 return;
 681             }
 682         }
 683     }
 684     QTAILQ_FOREACH_SAFE(req, &uas->requests, next, nreq) {
 685         if (req->data == p) {
 686             req->data = NULL;
 687             return;
 688         }
 689     }
 690     assert(!"canceled usb packet not found");
 691 }
 692
 693 static void usb_uas_command(UASDevice *uas, uas_iu *iu)
 694 {
 695     UASRequest *req;
 696     uint32_t len;
 697     uint16_t tag = be16_to_cpu(iu->hdr.tag);
 698
 699     if (uas_using_streams(uas) && tag > UAS_MAX_STREAMS) {
 700         goto invalid_tag;
 701     }
 702     req = usb_uas_find_request(uas, tag);
 703     if (req) {
 704         goto overlapped_tag;
 705     }
 706     req = usb_uas_alloc_request(uas, iu);
 707     if (req->dev == NULL) {
 708         goto bad_target;
 709     }
 710
 711     trace_usb_uas_command(uas->dev.addr, req->tag,
 712                           usb_uas_get_lun(req->lun),
 713                           req->lun >> 32, req->lun & 0xffffffff);
 714     QTAILQ_INSERT_TAIL(&uas->requests, req, next);
 715     if (uas_using_streams(uas) && uas->data3[req->tag] != NULL) {
 716         req->data = uas->data3[req->tag];
 717         req->data_async = true;
 718         uas->data3[req->tag] = NULL;
 719     }
 720
 721     req->req = scsi_req_new(req->dev, req->tag,
 722                             usb_uas_get_lun(req->lun),
 723                             iu->command.cdb, req);
 724     if (uas->requestlog) {
 725         scsi_req_print(req->req);
 726     }
 727     len = scsi_req_enqueue(req->req);
 728     if (len) {
 729         req->data_size = len;
 730         scsi_req_continue(req->req);
 731     }
 732     return;
 733
 734 invalid_tag:
 735     usb_uas_queue_fake_sense(uas, tag, sense_code_INVALID_TAG);
 736     return;
 737
 738 overlapped_tag:
 739     usb_uas_queue_fake_sense(uas, tag, sense_code_OVERLAPPED_COMMANDS);
 740     return;
 741
 742 bad_target:
 743     usb_uas_queue_fake_sense(uas, tag, sense_code_LUN_NOT_SUPPORTED);
 744     g_free(req);
 745 }
 746
 747 static void usb_uas_task(UASDevice *uas, uas_iu *iu)
 748 {
 749     uint16_t tag = be16_to_cpu(iu->hdr.tag);
 750     uint64_t lun64 = be64_to_cpu(iu->task.lun);
 751     SCSIDevice *dev = usb_uas_get_dev(uas, lun64);
 752     int lun = usb_uas_get_lun(lun64);
 753     UASRequest *req;
 754     uint16_t task_tag;
 755
 756     if (uas_using_streams(uas) && tag > UAS_MAX_STREAMS) {
 757         goto invalid_tag;
 758     }
 759     req = usb_uas_find_request(uas, be16_to_cpu(iu->hdr.tag));
 760     if (req) {
 761         goto overlapped_tag;
 762     }
 763     if (dev == NULL) {
 764         goto incorrect_lun;
 765     }
 766
 767     switch (iu->task.function) {
 768     case UAS_TMF_ABORT_TASK:
 769         task_tag = be16_to_cpu(iu->task.task_tag);
 770         trace_usb_uas_tmf_abort_task(uas->dev.addr, tag, task_tag);
 771         req = usb_uas_find_request(uas, task_tag);
 772         if (req && req->dev == dev) {
 773             scsi_req_cancel(req->req);
 774         }
 775         usb_uas_queue_response(uas, tag, UAS_RC_TMF_COMPLETE);
 776         break;
 777
 778     case UAS_TMF_LOGICAL_UNIT_RESET:
 779         trace_usb_uas_tmf_logical_unit_reset(uas->dev.addr, tag, lun);
 780         qdev_reset_all(&dev->qdev);
 781         usb_uas_queue_response(uas, tag, UAS_RC_TMF_COMPLETE);
 782         break;
 783
 784     default:
 785         trace_usb_uas_tmf_unsupported(uas->dev.addr, tag, iu->task.function);
 786         usb_uas_queue_response(uas, tag, UAS_RC_TMF_NOT_SUPPORTED);
 787         break;
 788     }
 789     return;
 790
 791 invalid_tag:
 792     usb_uas_queue_response(uas, tag, UAS_RC_INVALID_INFO_UNIT);
 793     return;
 794
 795 overlapped_tag:
 796     usb_uas_queue_response(uas, req->tag, UAS_RC_OVERLAPPED_TAG);
 797     return;
 798
 799 incorrect_lun:
 800     usb_uas_queue_response(uas, tag, UAS_RC_INCORRECT_LUN);
 801 }
 802
 803 static void usb_uas_handle_data(USBDevice *dev, USBPacket *p)
 804 {
 805     UASDevice *uas = USB_UAS(dev);
 806     uas_iu iu;
 807     UASStatus *st;
 808     UASRequest *req;
 809     int length;
 810
 811     switch (p->ep->nr) {
 812     case UAS_PIPE_ID_COMMAND:
 813         length = MIN(sizeof(iu), p->iov.size);
 814         usb_packet_copy(p, &iu, length);
 815         switch (iu.hdr.id) {
 816         case UAS_UI_COMMAND:
 817             usb_uas_command(uas, &iu);
 818             break;
 819         case UAS_UI_TASK_MGMT:
 820             usb_uas_task(uas, &iu);
 821             break;
 822         default:
 823             error_report("%s: unknown command iu: id 0x%x",
 824                          __func__, iu.hdr.id);
 825             p->status = USB_RET_STALL;
 826             break;
 827         }
 828         break;
 829     case UAS_PIPE_ID_STATUS:
 830         if (p->stream) {
 831             QTAILQ_FOREACH(st, &uas->results, next) {
 832                 if (st->stream == p->stream) {
 833                     break;
 834                 }
 835             }
 836             if (st == NULL) {
 837                 assert(uas->status3[p->stream] == NULL);
 838                 uas->status3[p->stream] = p;
 839                 p->status = USB_RET_ASYNC;
 840                 break;
 841             }
 842         } else {
 843             st = QTAILQ_FIRST(&uas->results);
 844             if (st == NULL) {
 845                 assert(uas->status2 == NULL);
 846                 uas->status2 = p;
 847                 p->status = USB_RET_ASYNC;
 848                 break;
 849             }
 850         }
 851         usb_packet_copy(p, &st->status, st->length);
 852         QTAILQ_REMOVE(&uas->results, st, next);
 853         g_free(st);
 854         break;
 855     case UAS_PIPE_ID_DATA_IN:
 856     case UAS_PIPE_ID_DATA_OUT:
 857         if (p->stream) {
 858             req = usb_uas_find_request(uas, p->stream);
 859         } else {
 860             req = (p->ep->nr == UAS_PIPE_ID_DATA_IN)
 861                 ? uas->datain2 : uas->dataout2;
 862         }
 863         if (req == NULL) {
 864             if (p->stream) {
 865                 assert(uas->data3[p->stream] == NULL);
 866                 uas->data3[p->stream] = p;
 867                 p->status = USB_RET_ASYNC;
 868                 break;
 869             } else {
 870                 error_report("%s: no inflight request", __func__);
 871                 p->status = USB_RET_STALL;
 872                 break;
 873             }
 874         }
 875         scsi_req_ref(req->req);
 876         req->data = p;
 877         usb_uas_copy_data(req);
 878         if (p->actual_length == p->iov.size || req->complete) {
 879             req->data = NULL;
 880         } else {
 881             req->data_async = true;
 882             p->status = USB_RET_ASYNC;
 883         }
 884         scsi_req_unref(req->req);
 885         usb_uas_start_next_transfer(uas);
 886         break;
 887     default:
 888         error_report("%s: invalid endpoint %d", __func__, p->ep->nr);
 889         p->status = USB_RET_STALL;
 890         break;
 891     }
 892 }
 893
 894 static void usb_uas_unrealize(USBDevice *dev, Error **errp)
 895 {
 896     UASDevice *uas = USB_UAS(dev);
 897
 898     qemu_bh_delete(uas->status_bh);
 899
 900     object_unref(OBJECT(&uas->bus));
 901 }
 902
 903 static void usb_uas_realize(USBDevice *dev, Error **errp)
 904 {
 905     UASDevice *uas = USB_UAS(dev);
 906     DeviceState *d = DEVICE(dev);
 907
 908     usb_desc_create_serial(dev);
 909     usb_desc_init(dev);
 910     if (d->hotplugged) {
 911         uas->dev.auto_attach = 0;
 912     }
 913
 914     QTAILQ_INIT(&uas->results);
 915     QTAILQ_INIT(&uas->requests);
 916     uas->status_bh = qemu_bh_new(usb_uas_send_status_bh, uas);
 917
 918     scsi_bus_new(&uas->bus, sizeof(uas->bus), DEVICE(dev),
 919                  &usb_uas_scsi_info, NULL);
 920 }
 921
 922 static const VMStateDescription vmstate_usb_uas = {
 923     .name = "usb-uas",
 924     .unmigratable = 1,
 925     .fields = (VMStateField[]) {
 926         VMSTATE_USB_DEVICE(dev, UASDevice),
 927         VMSTATE_END_OF_LIST()
 928     }
 929 };
 930
 931 static Property uas_properties[] = {
 932     DEFINE_PROP_UINT32("log-scsi-req", UASDevice, requestlog, 0),
 933     DEFINE_PROP_END_OF_LIST(),
 934 };
 935
 936 static void usb_uas_class_initfn(ObjectClass *klass, void *data)
 937 {
 938     DeviceClass *dc = DEVICE_CLASS(klass);
 939     USBDeviceClass *uc = USB_DEVICE_CLASS(klass);
 940
 941     uc->realize        = usb_uas_realize;
 942     uc->product_desc   = desc_strings[STR_PRODUCT];
 943     uc->usb_desc       = &desc;
 944     uc->cancel_packet  = usb_uas_cancel_io;
 945     uc->handle_attach  = usb_desc_attach;
 946     uc->handle_reset   = usb_uas_handle_reset;
 947     uc->handle_control = usb_uas_handle_control;
 948     uc->handle_data    = usb_uas_handle_data;
 949     uc->unrealize      = usb_uas_unrealize;
 950     uc->attached_settable = true;
 951     set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
 952     dc->fw_name = "storage";
 953     dc->vmsd = &vmstate_usb_uas;
 954     dc->props = uas_properties;
 955 }
 956
 957 static const TypeInfo uas_info = {
 958     .name          = TYPE_USB_UAS,
 959     .parent        = TYPE_USB_DEVICE,
 960     .instance_size = sizeof(UASDevice),
 961     .class_init    = usb_uas_class_initfn,
 962 };
 963
 964 static void usb_uas_register_types(void)
 965 {
 966     type_register_static(&uas_info);
 967 }
 968
 969 type_init(usb_uas_register_types)