2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
40 #include <sys/types.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
53 struct BdrvDirtyBitmap {
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
151 bs->io_limits_enabled = enabled;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
183 bdrv_throttle_read_timer_cb,
184 bdrv_throttle_write_timer_cb,
186 bs->io_limits_enabled = true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState *bs,
198 /* does this io must wait */
199 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201 /* if must wait or any request of this type throttled queue the IO */
203 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
204 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs->throttle_state, is_write, bytes);
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
220 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 if (!bs || !bs->drv) {
223 /* 4k should be on the safe side */
227 return bs->bl.opt_mem_alignment;
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path)
236 if (is_windows_drive(path) ||
237 is_windows_drive_prefix(path)) {
240 p = path + strcspn(path, ":/\\");
242 p = path + strcspn(path, ":/");
248 int path_is_absolute(const char *path)
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
255 return (*path == '/' || *path == '\\');
257 return (*path == '/');
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
264 void path_combine(char *dest, int dest_size,
265 const char *base_path,
266 const char *filename)
273 if (path_is_absolute(filename)) {
274 pstrcpy(dest, dest_size, filename);
276 p = strchr(base_path, ':');
281 p1 = strrchr(base_path, '/');
285 p2 = strrchr(base_path, '\\');
297 if (len > dest_size - 1)
299 memcpy(dest, base_path, len);
301 pstrcat(dest, dest_size, filename);
305 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
308 pstrcpy(dest, sz, bs->backing_file);
310 path_combine(dest, sz, bs->filename, bs->backing_file);
314 void bdrv_register(BlockDriver *bdrv)
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv->bdrv_co_readv) {
318 bdrv->bdrv_co_readv = bdrv_co_readv_em;
319 bdrv->bdrv_co_writev = bdrv_co_writev_em;
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
324 if (!bdrv->bdrv_aio_readv) {
325 /* add AIO emulation layer */
326 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
327 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
331 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
334 /* create a new block device (by default it is empty) */
335 BlockDriverState *bdrv_new(const char *device_name)
337 BlockDriverState *bs;
339 bs = g_malloc0(sizeof(BlockDriverState));
340 QLIST_INIT(&bs->dirty_bitmaps);
341 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
342 if (device_name[0] != '\0') {
343 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
345 bdrv_iostatus_disable(bs);
346 notifier_list_init(&bs->close_notifiers);
347 notifier_with_return_list_init(&bs->before_write_notifiers);
348 qemu_co_queue_init(&bs->throttled_reqs[0]);
349 qemu_co_queue_init(&bs->throttled_reqs[1]);
355 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
357 notifier_list_add(&bs->close_notifiers, notify);
360 BlockDriver *bdrv_find_format(const char *format_name)
363 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
364 if (!strcmp(drv1->format_name, format_name)) {
371 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
373 static const char *whitelist_rw[] = {
374 CONFIG_BDRV_RW_WHITELIST
376 static const char *whitelist_ro[] = {
377 CONFIG_BDRV_RO_WHITELIST
381 if (!whitelist_rw[0] && !whitelist_ro[0]) {
382 return 1; /* no whitelist, anything goes */
385 for (p = whitelist_rw; *p; p++) {
386 if (!strcmp(drv->format_name, *p)) {
391 for (p = whitelist_ro; *p; p++) {
392 if (!strcmp(drv->format_name, *p)) {
400 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
403 BlockDriver *drv = bdrv_find_format(format_name);
404 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
407 typedef struct CreateCo {
410 QEMUOptionParameter *options;
415 static void coroutine_fn bdrv_create_co_entry(void *opaque)
417 Error *local_err = NULL;
420 CreateCo *cco = opaque;
423 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
424 if (error_is_set(&local_err)) {
425 error_propagate(&cco->err, local_err);
430 int bdrv_create(BlockDriver *drv, const char* filename,
431 QEMUOptionParameter *options, Error **errp)
438 .filename = g_strdup(filename),
444 if (!drv->bdrv_create) {
445 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
450 if (qemu_in_coroutine()) {
451 /* Fast-path if already in coroutine context */
452 bdrv_create_co_entry(&cco);
454 co = qemu_coroutine_create(bdrv_create_co_entry);
455 qemu_coroutine_enter(co, &cco);
456 while (cco.ret == NOT_DONE) {
463 if (error_is_set(&cco.err)) {
464 error_propagate(errp, cco.err);
466 error_setg_errno(errp, -ret, "Could not create image");
471 g_free(cco.filename);
475 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
479 Error *local_err = NULL;
482 drv = bdrv_find_protocol(filename, true);
484 error_setg(errp, "Could not find protocol for file '%s'", filename);
488 ret = bdrv_create(drv, filename, options, &local_err);
489 if (error_is_set(&local_err)) {
490 error_propagate(errp, local_err);
495 int bdrv_refresh_limits(BlockDriverState *bs)
497 BlockDriver *drv = bs->drv;
499 memset(&bs->bl, 0, sizeof(bs->bl));
505 /* Take some limits from the children as a default */
507 bdrv_refresh_limits(bs->file);
508 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
509 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
511 bs->bl.opt_mem_alignment = 512;
514 if (bs->backing_hd) {
515 bdrv_refresh_limits(bs->backing_hd);
516 bs->bl.opt_transfer_length =
517 MAX(bs->bl.opt_transfer_length,
518 bs->backing_hd->bl.opt_transfer_length);
519 bs->bl.opt_mem_alignment =
520 MAX(bs->bl.opt_mem_alignment,
521 bs->backing_hd->bl.opt_mem_alignment);
524 /* Then let the driver override it */
525 if (drv->bdrv_refresh_limits) {
526 return drv->bdrv_refresh_limits(bs);
533 * Create a uniquely-named empty temporary file.
534 * Return 0 upon success, otherwise a negative errno value.
536 int get_tmp_filename(char *filename, int size)
539 char temp_dir[MAX_PATH];
540 /* GetTempFileName requires that its output buffer (4th param)
541 have length MAX_PATH or greater. */
542 assert(size >= MAX_PATH);
543 return (GetTempPath(MAX_PATH, temp_dir)
544 && GetTempFileName(temp_dir, "qem", 0, filename)
545 ? 0 : -GetLastError());
549 tmpdir = getenv("TMPDIR");
552 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
555 fd = mkstemp(filename);
559 if (close(fd) != 0) {
568 * Detect host devices. By convention, /dev/cdrom[N] is always
569 * recognized as a host CDROM.
571 static BlockDriver *find_hdev_driver(const char *filename)
573 int score_max = 0, score;
574 BlockDriver *drv = NULL, *d;
576 QLIST_FOREACH(d, &bdrv_drivers, list) {
577 if (d->bdrv_probe_device) {
578 score = d->bdrv_probe_device(filename);
579 if (score > score_max) {
589 BlockDriver *bdrv_find_protocol(const char *filename,
590 bool allow_protocol_prefix)
597 /* TODO Drivers without bdrv_file_open must be specified explicitly */
600 * XXX(hch): we really should not let host device detection
601 * override an explicit protocol specification, but moving this
602 * later breaks access to device names with colons in them.
603 * Thanks to the brain-dead persistent naming schemes on udev-
604 * based Linux systems those actually are quite common.
606 drv1 = find_hdev_driver(filename);
611 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
612 return bdrv_find_format("file");
615 p = strchr(filename, ':');
618 if (len > sizeof(protocol) - 1)
619 len = sizeof(protocol) - 1;
620 memcpy(protocol, filename, len);
621 protocol[len] = '\0';
622 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
623 if (drv1->protocol_name &&
624 !strcmp(drv1->protocol_name, protocol)) {
631 static int find_image_format(BlockDriverState *bs, const char *filename,
632 BlockDriver **pdrv, Error **errp)
634 int score, score_max;
635 BlockDriver *drv1, *drv;
639 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
640 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
641 drv = bdrv_find_format("raw");
643 error_setg(errp, "Could not find raw image format");
650 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
652 error_setg_errno(errp, -ret, "Could not read image for determining its "
660 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
661 if (drv1->bdrv_probe) {
662 score = drv1->bdrv_probe(buf, ret, filename);
663 if (score > score_max) {
670 error_setg(errp, "Could not determine image format: No compatible "
679 * Set the current 'total_sectors' value
681 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
683 BlockDriver *drv = bs->drv;
685 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
689 /* query actual device if possible, otherwise just trust the hint */
690 if (drv->bdrv_getlength) {
691 int64_t length = drv->bdrv_getlength(bs);
695 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
698 bs->total_sectors = hint;
703 * Set open flags for a given discard mode
705 * Return 0 on success, -1 if the discard mode was invalid.
707 int bdrv_parse_discard_flags(const char *mode, int *flags)
709 *flags &= ~BDRV_O_UNMAP;
711 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
713 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
714 *flags |= BDRV_O_UNMAP;
723 * Set open flags for a given cache mode
725 * Return 0 on success, -1 if the cache mode was invalid.
727 int bdrv_parse_cache_flags(const char *mode, int *flags)
729 *flags &= ~BDRV_O_CACHE_MASK;
731 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
732 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
733 } else if (!strcmp(mode, "directsync")) {
734 *flags |= BDRV_O_NOCACHE;
735 } else if (!strcmp(mode, "writeback")) {
736 *flags |= BDRV_O_CACHE_WB;
737 } else if (!strcmp(mode, "unsafe")) {
738 *flags |= BDRV_O_CACHE_WB;
739 *flags |= BDRV_O_NO_FLUSH;
740 } else if (!strcmp(mode, "writethrough")) {
741 /* this is the default */
750 * The copy-on-read flag is actually a reference count so multiple users may
751 * use the feature without worrying about clobbering its previous state.
752 * Copy-on-read stays enabled until all users have called to disable it.
754 void bdrv_enable_copy_on_read(BlockDriverState *bs)
759 void bdrv_disable_copy_on_read(BlockDriverState *bs)
761 assert(bs->copy_on_read > 0);
765 static int bdrv_open_flags(BlockDriverState *bs, int flags)
767 int open_flags = flags | BDRV_O_CACHE_WB;
770 * Clear flags that are internal to the block layer before opening the
773 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
776 * Snapshots should be writable.
778 if (bs->is_temporary) {
779 open_flags |= BDRV_O_RDWR;
785 static int bdrv_assign_node_name(BlockDriverState *bs,
786 const char *node_name,
793 /* empty string node name is invalid */
794 if (node_name[0] == '\0') {
795 error_setg(errp, "Empty node name");
799 /* takes care of avoiding duplicates node names */
800 if (bdrv_find_node(node_name)) {
801 error_setg(errp, "Duplicate node name");
805 /* copy node name into the bs and insert it into the graph list */
806 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
807 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
813 * Common part for opening disk images and files
815 * Removes all processed options from *options.
817 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
818 QDict *options, int flags, BlockDriver *drv, Error **errp)
821 const char *filename;
822 const char *node_name = NULL;
823 Error *local_err = NULL;
826 assert(bs->file == NULL);
827 assert(options != NULL && bs->options != options);
830 filename = file->filename;
832 filename = qdict_get_try_str(options, "filename");
835 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
837 node_name = qdict_get_try_str(options, "node-name");
838 ret = bdrv_assign_node_name(bs, node_name, errp);
842 qdict_del(options, "node-name");
844 /* bdrv_open() with directly using a protocol as drv. This layer is already
845 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
846 * and return immediately. */
847 if (file != NULL && drv->bdrv_file_open) {
852 bs->open_flags = flags;
853 bs->guest_block_size = 512;
854 bs->request_alignment = 512;
855 bs->zero_beyond_eof = true;
856 open_flags = bdrv_open_flags(bs, flags);
857 bs->read_only = !(open_flags & BDRV_O_RDWR);
859 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
861 !bs->read_only && bdrv_is_whitelisted(drv, true)
862 ? "Driver '%s' can only be used for read-only devices"
863 : "Driver '%s' is not whitelisted",
868 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
869 if (flags & BDRV_O_COPY_ON_READ) {
870 if (!bs->read_only) {
871 bdrv_enable_copy_on_read(bs);
873 error_setg(errp, "Can't use copy-on-read on read-only device");
878 if (filename != NULL) {
879 pstrcpy(bs->filename, sizeof(bs->filename), filename);
881 bs->filename[0] = '\0';
885 bs->opaque = g_malloc0(drv->instance_size);
887 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
889 /* Open the image, either directly or using a protocol */
890 if (drv->bdrv_file_open) {
891 assert(file == NULL);
892 assert(!drv->bdrv_needs_filename || filename != NULL);
893 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
896 error_setg(errp, "Can't use '%s' as a block driver for the "
897 "protocol level", drv->format_name);
902 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
906 if (error_is_set(&local_err)) {
907 error_propagate(errp, local_err);
908 } else if (bs->filename[0]) {
909 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
911 error_setg_errno(errp, -ret, "Could not open image");
916 ret = refresh_total_sectors(bs, bs->total_sectors);
918 error_setg_errno(errp, -ret, "Could not refresh total sector count");
922 bdrv_refresh_limits(bs);
923 assert(bdrv_opt_mem_align(bs) != 0);
924 assert(bs->request_alignment != 0);
927 if (bs->is_temporary) {
928 assert(bs->filename[0] != '\0');
929 unlink(bs->filename);
943 * Opens a file using a protocol (file, host_device, nbd, ...)
945 * options is a QDict of options to pass to the block drivers, or NULL for an
946 * empty set of options. The reference to the QDict belongs to the block layer
947 * after the call (even on failure), so if the caller intends to reuse the
948 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
950 int bdrv_file_open(BlockDriverState **pbs, const char *filename,
951 const char *reference, QDict *options, int flags,
954 BlockDriverState *bs = NULL;
957 bool allow_protocol_prefix = false;
958 Error *local_err = NULL;
961 /* NULL means an empty set of options */
962 if (options == NULL) {
963 options = qdict_new();
967 if (filename || qdict_size(options)) {
968 error_setg(errp, "Cannot reference an existing block device with "
969 "additional options or a new filename");
974 bs = bdrv_find(reference);
976 error_setg(errp, "Cannot find block device '%s'", reference);
985 bs->options = options;
986 options = qdict_clone_shallow(options);
988 /* Fetch the file name from the options QDict if necessary */
990 filename = qdict_get_try_str(options, "filename");
991 } else if (filename && !qdict_haskey(options, "filename")) {
992 qdict_put(options, "filename", qstring_from_str(filename));
993 allow_protocol_prefix = true;
995 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
1001 /* Find the right block driver */
1002 drvname = qdict_get_try_str(options, "driver");
1004 drv = bdrv_find_format(drvname);
1006 error_setg(errp, "Unknown driver '%s'", drvname);
1008 qdict_del(options, "driver");
1009 } else if (filename) {
1010 drv = bdrv_find_protocol(filename, allow_protocol_prefix);
1012 error_setg(errp, "Unknown protocol");
1015 error_setg(errp, "Must specify either driver or file");
1020 /* errp has been set already */
1025 /* Parse the filename and open it */
1026 if (drv->bdrv_parse_filename && filename) {
1027 drv->bdrv_parse_filename(filename, options, &local_err);
1028 if (error_is_set(&local_err)) {
1029 error_propagate(errp, local_err);
1033 qdict_del(options, "filename");
1034 } else if (drv->bdrv_needs_filename && !filename) {
1035 error_setg(errp, "The '%s' block driver requires a file name",
1041 if (!drv->bdrv_file_open) {
1042 ret = bdrv_open(bs, filename, options, flags, drv, &local_err);
1045 ret = bdrv_open_common(bs, NULL, options, flags, drv, &local_err);
1048 error_propagate(errp, local_err);
1052 /* Check if any unknown options were used */
1053 if (options && (qdict_size(options) != 0)) {
1054 const QDictEntry *entry = qdict_first(options);
1055 error_setg(errp, "Block protocol '%s' doesn't support the option '%s'",
1056 drv->format_name, entry->key);
1069 QDECREF(bs->options);
1076 * Opens the backing file for a BlockDriverState if not yet open
1078 * options is a QDict of options to pass to the block drivers, or NULL for an
1079 * empty set of options. The reference to the QDict is transferred to this
1080 * function (even on failure), so if the caller intends to reuse the dictionary,
1081 * it needs to use QINCREF() before calling bdrv_file_open.
1083 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1085 char backing_filename[PATH_MAX];
1086 int back_flags, ret;
1087 BlockDriver *back_drv = NULL;
1088 Error *local_err = NULL;
1090 if (bs->backing_hd != NULL) {
1095 /* NULL means an empty set of options */
1096 if (options == NULL) {
1097 options = qdict_new();
1100 bs->open_flags &= ~BDRV_O_NO_BACKING;
1101 if (qdict_haskey(options, "file.filename")) {
1102 backing_filename[0] = '\0';
1103 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1107 bdrv_get_full_backing_filename(bs, backing_filename,
1108 sizeof(backing_filename));
1111 bs->backing_hd = bdrv_new("");
1113 if (bs->backing_format[0] != '\0') {
1114 back_drv = bdrv_find_format(bs->backing_format);
1117 /* backing files always opened read-only */
1118 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
1119 BDRV_O_COPY_ON_READ);
1121 ret = bdrv_open(bs->backing_hd,
1122 *backing_filename ? backing_filename : NULL, options,
1123 back_flags, back_drv, &local_err);
1125 bdrv_unref(bs->backing_hd);
1126 bs->backing_hd = NULL;
1127 bs->open_flags |= BDRV_O_NO_BACKING;
1128 error_setg(errp, "Could not open backing file: %s",
1129 error_get_pretty(local_err));
1130 error_free(local_err);
1134 if (bs->backing_hd->file) {
1135 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1136 bs->backing_hd->file->filename);
1139 /* Recalculate the BlockLimits with the backing file */
1140 bdrv_refresh_limits(bs);
1146 * Opens a disk image whose options are given as BlockdevRef in another block
1149 * If force_raw is true, bdrv_file_open() will be used, thereby preventing any
1150 * image format auto-detection. If it is false and a filename is given,
1151 * bdrv_open() will be used for auto-detection.
1153 * If allow_none is true, no image will be opened if filename is false and no
1154 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1156 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1157 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1158 * itself, all options starting with "${bdref_key}." are considered part of the
1161 * The BlockdevRef will be removed from the options QDict.
1163 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1164 QDict *options, const char *bdref_key, int flags,
1165 bool force_raw, bool allow_none, Error **errp)
1167 QDict *image_options;
1169 char *bdref_key_dot;
1170 const char *reference;
1172 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1173 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1174 g_free(bdref_key_dot);
1176 reference = qdict_get_try_str(options, bdref_key);
1177 if (!filename && !reference && !qdict_size(image_options)) {
1181 error_setg(errp, "A block device must be specified for \"%s\"",
1188 if (filename && !force_raw) {
1189 /* If a filename is given and the block driver should be detected
1190 automatically (instead of using none), use bdrv_open() in order to do
1191 that auto-detection. */
1192 BlockDriverState *bs;
1195 error_setg(errp, "Cannot reference an existing block device while "
1196 "giving a filename");
1202 ret = bdrv_open(bs, filename, image_options, flags, NULL, errp);
1209 ret = bdrv_file_open(pbs, filename, reference, image_options, flags,
1214 qdict_del(options, bdref_key);
1219 * Opens a disk image (raw, qcow2, vmdk, ...)
1221 * options is a QDict of options to pass to the block drivers, or NULL for an
1222 * empty set of options. The reference to the QDict belongs to the block layer
1223 * after the call (even on failure), so if the caller intends to reuse the
1224 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1226 int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
1227 int flags, BlockDriver *drv, Error **errp)
1230 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1231 char tmp_filename[PATH_MAX + 1];
1232 BlockDriverState *file = NULL;
1233 const char *drvname;
1234 Error *local_err = NULL;
1236 /* NULL means an empty set of options */
1237 if (options == NULL) {
1238 options = qdict_new();
1241 bs->options = options;
1242 options = qdict_clone_shallow(options);
1244 /* For snapshot=on, create a temporary qcow2 overlay */
1245 if (flags & BDRV_O_SNAPSHOT) {
1246 BlockDriverState *bs1;
1248 BlockDriver *bdrv_qcow2;
1249 QEMUOptionParameter *create_options;
1250 QDict *snapshot_options;
1252 /* if snapshot, we create a temporary backing file and open it
1253 instead of opening 'filename' directly */
1255 /* Get the required size from the image */
1258 ret = bdrv_open(bs1, filename, options, BDRV_O_NO_BACKING,
1264 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1268 /* Create the temporary image */
1269 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1271 error_setg_errno(errp, -ret, "Could not get temporary filename");
1275 bdrv_qcow2 = bdrv_find_format("qcow2");
1276 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1279 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1281 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1282 free_option_parameters(create_options);
1284 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1285 "'%s': %s", tmp_filename,
1286 error_get_pretty(local_err));
1287 error_free(local_err);
1292 /* Prepare a new options QDict for the temporary file, where user
1293 * options refer to the backing file */
1295 qdict_put(options, "file.filename", qstring_from_str(filename));
1298 qdict_put(options, "driver", qstring_from_str(drv->format_name));
1301 snapshot_options = qdict_new();
1302 qdict_put(snapshot_options, "backing", options);
1303 qdict_flatten(snapshot_options);
1305 bs->options = snapshot_options;
1306 options = qdict_clone_shallow(bs->options);
1308 filename = tmp_filename;
1310 bs->is_temporary = 1;
1313 /* Open image file without format layer */
1314 if (flags & BDRV_O_RDWR) {
1315 flags |= BDRV_O_ALLOW_RDWR;
1318 ret = bdrv_open_image(&file, filename, options, "file",
1319 bdrv_open_flags(bs, flags | BDRV_O_UNMAP), true, true,
1325 /* Find the right image format driver */
1326 drvname = qdict_get_try_str(options, "driver");
1328 drv = bdrv_find_format(drvname);
1329 qdict_del(options, "driver");
1331 error_setg(errp, "Invalid driver: '%s'", drvname);
1333 goto unlink_and_fail;
1339 ret = find_image_format(file, filename, &drv, &local_err);
1341 error_setg(errp, "Must specify either driver or file");
1343 goto unlink_and_fail;
1348 goto unlink_and_fail;
1351 /* Open the image */
1352 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1354 goto unlink_and_fail;
1357 if (file && (bs->file != file)) {
1362 /* If there is a backing file, use it */
1363 if ((flags & BDRV_O_NO_BACKING) == 0) {
1364 QDict *backing_options;
1366 qdict_extract_subqdict(options, &backing_options, "backing.");
1367 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1369 goto close_and_fail;
1373 /* Check if any unknown options were used */
1374 if (qdict_size(options) != 0) {
1375 const QDictEntry *entry = qdict_first(options);
1376 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1377 "support the option '%s'", drv->format_name, bs->device_name,
1381 goto close_and_fail;
1385 if (!bdrv_key_required(bs)) {
1386 bdrv_dev_change_media_cb(bs, true);
1395 if (bs->is_temporary) {
1399 QDECREF(bs->options);
1402 if (error_is_set(&local_err)) {
1403 error_propagate(errp, local_err);
1410 if (error_is_set(&local_err)) {
1411 error_propagate(errp, local_err);
1416 typedef struct BlockReopenQueueEntry {
1418 BDRVReopenState state;
1419 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1420 } BlockReopenQueueEntry;
1423 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1424 * reopen of multiple devices.
1426 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1427 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1428 * be created and initialized. This newly created BlockReopenQueue should be
1429 * passed back in for subsequent calls that are intended to be of the same
1432 * bs is the BlockDriverState to add to the reopen queue.
1434 * flags contains the open flags for the associated bs
1436 * returns a pointer to bs_queue, which is either the newly allocated
1437 * bs_queue, or the existing bs_queue being used.
1440 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1441 BlockDriverState *bs, int flags)
1445 BlockReopenQueueEntry *bs_entry;
1446 if (bs_queue == NULL) {
1447 bs_queue = g_new0(BlockReopenQueue, 1);
1448 QSIMPLEQ_INIT(bs_queue);
1452 bdrv_reopen_queue(bs_queue, bs->file, flags);
1455 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1456 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1458 bs_entry->state.bs = bs;
1459 bs_entry->state.flags = flags;
1465 * Reopen multiple BlockDriverStates atomically & transactionally.
1467 * The queue passed in (bs_queue) must have been built up previous
1468 * via bdrv_reopen_queue().
1470 * Reopens all BDS specified in the queue, with the appropriate
1471 * flags. All devices are prepared for reopen, and failure of any
1472 * device will cause all device changes to be abandonded, and intermediate
1475 * If all devices prepare successfully, then the changes are committed
1479 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1482 BlockReopenQueueEntry *bs_entry, *next;
1483 Error *local_err = NULL;
1485 assert(bs_queue != NULL);
1489 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1490 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1491 error_propagate(errp, local_err);
1494 bs_entry->prepared = true;
1497 /* If we reach this point, we have success and just need to apply the
1500 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1501 bdrv_reopen_commit(&bs_entry->state);
1507 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1508 if (ret && bs_entry->prepared) {
1509 bdrv_reopen_abort(&bs_entry->state);
1518 /* Reopen a single BlockDriverState with the specified flags. */
1519 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1522 Error *local_err = NULL;
1523 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1525 ret = bdrv_reopen_multiple(queue, &local_err);
1526 if (local_err != NULL) {
1527 error_propagate(errp, local_err);
1534 * Prepares a BlockDriverState for reopen. All changes are staged in the
1535 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1536 * the block driver layer .bdrv_reopen_prepare()
1538 * bs is the BlockDriverState to reopen
1539 * flags are the new open flags
1540 * queue is the reopen queue
1542 * Returns 0 on success, non-zero on error. On error errp will be set
1545 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1546 * It is the responsibility of the caller to then call the abort() or
1547 * commit() for any other BDS that have been left in a prepare() state
1550 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1554 Error *local_err = NULL;
1557 assert(reopen_state != NULL);
1558 assert(reopen_state->bs->drv != NULL);
1559 drv = reopen_state->bs->drv;
1561 /* if we are to stay read-only, do not allow permission change
1563 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1564 reopen_state->flags & BDRV_O_RDWR) {
1565 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1566 reopen_state->bs->device_name);
1571 ret = bdrv_flush(reopen_state->bs);
1573 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1578 if (drv->bdrv_reopen_prepare) {
1579 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1581 if (local_err != NULL) {
1582 error_propagate(errp, local_err);
1584 error_setg(errp, "failed while preparing to reopen image '%s'",
1585 reopen_state->bs->filename);
1590 /* It is currently mandatory to have a bdrv_reopen_prepare()
1591 * handler for each supported drv. */
1592 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1593 drv->format_name, reopen_state->bs->device_name,
1594 "reopening of file");
1606 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1607 * makes them final by swapping the staging BlockDriverState contents into
1608 * the active BlockDriverState contents.
1610 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1614 assert(reopen_state != NULL);
1615 drv = reopen_state->bs->drv;
1616 assert(drv != NULL);
1618 /* If there are any driver level actions to take */
1619 if (drv->bdrv_reopen_commit) {
1620 drv->bdrv_reopen_commit(reopen_state);
1623 /* set BDS specific flags now */
1624 reopen_state->bs->open_flags = reopen_state->flags;
1625 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1627 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1629 bdrv_refresh_limits(reopen_state->bs);
1633 * Abort the reopen, and delete and free the staged changes in
1636 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1640 assert(reopen_state != NULL);
1641 drv = reopen_state->bs->drv;
1642 assert(drv != NULL);
1644 if (drv->bdrv_reopen_abort) {
1645 drv->bdrv_reopen_abort(reopen_state);
1650 void bdrv_close(BlockDriverState *bs)
1653 block_job_cancel_sync(bs->job);
1655 bdrv_drain_all(); /* complete I/O */
1657 bdrv_drain_all(); /* in case flush left pending I/O */
1658 notifier_list_notify(&bs->close_notifiers, bs);
1661 if (bs->backing_hd) {
1662 bdrv_unref(bs->backing_hd);
1663 bs->backing_hd = NULL;
1665 bs->drv->bdrv_close(bs);
1668 if (bs->is_temporary) {
1669 unlink(bs->filename);
1674 bs->copy_on_read = 0;
1675 bs->backing_file[0] = '\0';
1676 bs->backing_format[0] = '\0';
1677 bs->total_sectors = 0;
1682 bs->zero_beyond_eof = false;
1683 QDECREF(bs->options);
1686 if (bs->file != NULL) {
1687 bdrv_unref(bs->file);
1692 bdrv_dev_change_media_cb(bs, false);
1694 /*throttling disk I/O limits*/
1695 if (bs->io_limits_enabled) {
1696 bdrv_io_limits_disable(bs);
1700 void bdrv_close_all(void)
1702 BlockDriverState *bs;
1704 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1709 /* Check if any requests are in-flight (including throttled requests) */
1710 static bool bdrv_requests_pending(BlockDriverState *bs)
1712 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1715 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1718 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1721 if (bs->file && bdrv_requests_pending(bs->file)) {
1724 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1730 static bool bdrv_requests_pending_all(void)
1732 BlockDriverState *bs;
1733 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1734 if (bdrv_requests_pending(bs)) {
1742 * Wait for pending requests to complete across all BlockDriverStates
1744 * This function does not flush data to disk, use bdrv_flush_all() for that
1745 * after calling this function.
1747 * Note that completion of an asynchronous I/O operation can trigger any
1748 * number of other I/O operations on other devices---for example a coroutine
1749 * can be arbitrarily complex and a constant flow of I/O can come until the
1750 * coroutine is complete. Because of this, it is not possible to have a
1751 * function to drain a single device's I/O queue.
1753 void bdrv_drain_all(void)
1755 /* Always run first iteration so any pending completion BHs run */
1757 BlockDriverState *bs;
1760 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1761 bdrv_start_throttled_reqs(bs);
1764 busy = bdrv_requests_pending_all();
1765 busy |= aio_poll(qemu_get_aio_context(), busy);
1769 /* make a BlockDriverState anonymous by removing from bdrv_state and
1770 * graph_bdrv_state list.
1771 Also, NULL terminate the device_name to prevent double remove */
1772 void bdrv_make_anon(BlockDriverState *bs)
1774 if (bs->device_name[0] != '\0') {
1775 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1777 bs->device_name[0] = '\0';
1778 if (bs->node_name[0] != '\0') {
1779 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1781 bs->node_name[0] = '\0';
1784 static void bdrv_rebind(BlockDriverState *bs)
1786 if (bs->drv && bs->drv->bdrv_rebind) {
1787 bs->drv->bdrv_rebind(bs);
1791 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1792 BlockDriverState *bs_src)
1794 /* move some fields that need to stay attached to the device */
1795 bs_dest->open_flags = bs_src->open_flags;
1798 bs_dest->dev_ops = bs_src->dev_ops;
1799 bs_dest->dev_opaque = bs_src->dev_opaque;
1800 bs_dest->dev = bs_src->dev;
1801 bs_dest->guest_block_size = bs_src->guest_block_size;
1802 bs_dest->copy_on_read = bs_src->copy_on_read;
1804 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1806 /* i/o throttled req */
1807 memcpy(&bs_dest->throttle_state,
1808 &bs_src->throttle_state,
1809 sizeof(ThrottleState));
1810 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1811 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1812 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1815 bs_dest->on_read_error = bs_src->on_read_error;
1816 bs_dest->on_write_error = bs_src->on_write_error;
1819 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1820 bs_dest->iostatus = bs_src->iostatus;
1823 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1825 /* reference count */
1826 bs_dest->refcnt = bs_src->refcnt;
1829 bs_dest->in_use = bs_src->in_use;
1830 bs_dest->job = bs_src->job;
1832 /* keep the same entry in bdrv_states */
1833 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1834 bs_src->device_name);
1835 bs_dest->device_list = bs_src->device_list;
1837 /* keep the same entry in graph_bdrv_states
1838 * We do want to swap name but don't want to swap linked list entries
1840 bs_dest->node_list = bs_src->node_list;
1844 * Swap bs contents for two image chains while they are live,
1845 * while keeping required fields on the BlockDriverState that is
1846 * actually attached to a device.
1848 * This will modify the BlockDriverState fields, and swap contents
1849 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1851 * bs_new is required to be anonymous.
1853 * This function does not create any image files.
1855 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1857 BlockDriverState tmp;
1859 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1860 assert(bs_new->device_name[0] == '\0');
1861 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
1862 assert(bs_new->job == NULL);
1863 assert(bs_new->dev == NULL);
1864 assert(bs_new->in_use == 0);
1865 assert(bs_new->io_limits_enabled == false);
1866 assert(!throttle_have_timer(&bs_new->throttle_state));
1872 /* there are some fields that should not be swapped, move them back */
1873 bdrv_move_feature_fields(&tmp, bs_old);
1874 bdrv_move_feature_fields(bs_old, bs_new);
1875 bdrv_move_feature_fields(bs_new, &tmp);
1877 /* bs_new shouldn't be in bdrv_states even after the swap! */
1878 assert(bs_new->device_name[0] == '\0');
1880 /* Check a few fields that should remain attached to the device */
1881 assert(bs_new->dev == NULL);
1882 assert(bs_new->job == NULL);
1883 assert(bs_new->in_use == 0);
1884 assert(bs_new->io_limits_enabled == false);
1885 assert(!throttle_have_timer(&bs_new->throttle_state));
1887 bdrv_rebind(bs_new);
1888 bdrv_rebind(bs_old);
1892 * Add new bs contents at the top of an image chain while the chain is
1893 * live, while keeping required fields on the top layer.
1895 * This will modify the BlockDriverState fields, and swap contents
1896 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1898 * bs_new is required to be anonymous.
1900 * This function does not create any image files.
1902 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1904 bdrv_swap(bs_new, bs_top);
1906 /* The contents of 'tmp' will become bs_top, as we are
1907 * swapping bs_new and bs_top contents. */
1908 bs_top->backing_hd = bs_new;
1909 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1910 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1912 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1913 bs_new->drv ? bs_new->drv->format_name : "");
1916 static void bdrv_delete(BlockDriverState *bs)
1920 assert(!bs->in_use);
1921 assert(!bs->refcnt);
1922 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
1926 /* remove from list, if necessary */
1932 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1933 /* TODO change to DeviceState *dev when all users are qdevified */
1939 bdrv_iostatus_reset(bs);
1943 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1944 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1946 if (bdrv_attach_dev(bs, dev) < 0) {
1951 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1952 /* TODO change to DeviceState *dev when all users are qdevified */
1954 assert(bs->dev == dev);
1957 bs->dev_opaque = NULL;
1958 bs->guest_block_size = 512;
1961 /* TODO change to return DeviceState * when all users are qdevified */
1962 void *bdrv_get_attached_dev(BlockDriverState *bs)
1967 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1971 bs->dev_opaque = opaque;
1974 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1975 enum MonitorEvent ev,
1976 BlockErrorAction action, bool is_read)
1979 const char *action_str;
1982 case BDRV_ACTION_REPORT:
1983 action_str = "report";
1985 case BDRV_ACTION_IGNORE:
1986 action_str = "ignore";
1988 case BDRV_ACTION_STOP:
1989 action_str = "stop";
1995 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1998 is_read ? "read" : "write");
1999 monitor_protocol_event(ev, data);
2001 qobject_decref(data);
2004 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
2008 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2009 bdrv_get_device_name(bs), ejected);
2010 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
2012 qobject_decref(data);
2015 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2017 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2018 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2019 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2020 if (tray_was_closed) {
2022 bdrv_emit_qmp_eject_event(bs, true);
2026 bdrv_emit_qmp_eject_event(bs, false);
2031 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2033 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2036 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2038 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2039 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2043 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2045 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2046 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2051 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2053 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2054 bs->dev_ops->resize_cb(bs->dev_opaque);
2058 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2060 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2061 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2067 * Run consistency checks on an image
2069 * Returns 0 if the check could be completed (it doesn't mean that the image is
2070 * free of errors) or -errno when an internal error occurred. The results of the
2071 * check are stored in res.
2073 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2075 if (bs->drv->bdrv_check == NULL) {
2079 memset(res, 0, sizeof(*res));
2080 return bs->drv->bdrv_check(bs, res, fix);
2083 #define COMMIT_BUF_SECTORS 2048
2085 /* commit COW file into the raw image */
2086 int bdrv_commit(BlockDriverState *bs)
2088 BlockDriver *drv = bs->drv;
2089 int64_t sector, total_sectors, length, backing_length;
2090 int n, ro, open_flags;
2092 uint8_t *buf = NULL;
2093 char filename[PATH_MAX];
2098 if (!bs->backing_hd) {
2102 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
2106 ro = bs->backing_hd->read_only;
2107 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2108 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2109 open_flags = bs->backing_hd->open_flags;
2112 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2117 length = bdrv_getlength(bs);
2123 backing_length = bdrv_getlength(bs->backing_hd);
2124 if (backing_length < 0) {
2125 ret = backing_length;
2129 /* If our top snapshot is larger than the backing file image,
2130 * grow the backing file image if possible. If not possible,
2131 * we must return an error */
2132 if (length > backing_length) {
2133 ret = bdrv_truncate(bs->backing_hd, length);
2139 total_sectors = length >> BDRV_SECTOR_BITS;
2140 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2142 for (sector = 0; sector < total_sectors; sector += n) {
2143 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2148 ret = bdrv_read(bs, sector, buf, n);
2153 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2160 if (drv->bdrv_make_empty) {
2161 ret = drv->bdrv_make_empty(bs);
2169 * Make sure all data we wrote to the backing device is actually
2172 if (bs->backing_hd) {
2173 bdrv_flush(bs->backing_hd);
2181 /* ignoring error return here */
2182 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2188 int bdrv_commit_all(void)
2190 BlockDriverState *bs;
2192 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2193 if (bs->drv && bs->backing_hd) {
2194 int ret = bdrv_commit(bs);
2204 * Remove an active request from the tracked requests list
2206 * This function should be called when a tracked request is completing.
2208 static void tracked_request_end(BdrvTrackedRequest *req)
2210 if (req->serialising) {
2211 req->bs->serialising_in_flight--;
2214 QLIST_REMOVE(req, list);
2215 qemu_co_queue_restart_all(&req->wait_queue);
2219 * Add an active request to the tracked requests list
2221 static void tracked_request_begin(BdrvTrackedRequest *req,
2222 BlockDriverState *bs,
2224 unsigned int bytes, bool is_write)
2226 *req = (BdrvTrackedRequest){
2230 .is_write = is_write,
2231 .co = qemu_coroutine_self(),
2232 .serialising = false,
2233 .overlap_offset = offset,
2234 .overlap_bytes = bytes,
2237 qemu_co_queue_init(&req->wait_queue);
2239 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2242 static void mark_request_serialising(BdrvTrackedRequest *req, size_t align)
2244 int64_t overlap_offset = req->offset & ~(align - 1);
2245 int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2248 if (!req->serialising) {
2249 req->bs->serialising_in_flight++;
2250 req->serialising = true;
2253 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2254 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2258 * Round a region to cluster boundaries
2260 void bdrv_round_to_clusters(BlockDriverState *bs,
2261 int64_t sector_num, int nb_sectors,
2262 int64_t *cluster_sector_num,
2263 int *cluster_nb_sectors)
2265 BlockDriverInfo bdi;
2267 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2268 *cluster_sector_num = sector_num;
2269 *cluster_nb_sectors = nb_sectors;
2271 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2272 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2273 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2278 static int bdrv_get_cluster_size(BlockDriverState *bs)
2280 BlockDriverInfo bdi;
2283 ret = bdrv_get_info(bs, &bdi);
2284 if (ret < 0 || bdi.cluster_size == 0) {
2285 return bs->request_alignment;
2287 return bdi.cluster_size;
2291 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2292 int64_t offset, unsigned int bytes)
2295 if (offset >= req->overlap_offset + req->overlap_bytes) {
2299 if (req->overlap_offset >= offset + bytes) {
2305 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2307 BlockDriverState *bs = self->bs;
2308 BdrvTrackedRequest *req;
2310 bool waited = false;
2312 if (!bs->serialising_in_flight) {
2318 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2319 if (req == self || (!req->serialising && !self->serialising)) {
2322 if (tracked_request_overlaps(req, self->overlap_offset,
2323 self->overlap_bytes))
2325 /* Hitting this means there was a reentrant request, for
2326 * example, a block driver issuing nested requests. This must
2327 * never happen since it means deadlock.
2329 assert(qemu_coroutine_self() != req->co);
2331 /* If the request is already (indirectly) waiting for us, or
2332 * will wait for us as soon as it wakes up, then just go on
2333 * (instead of producing a deadlock in the former case). */
2334 if (!req->waiting_for) {
2335 self->waiting_for = req;
2336 qemu_co_queue_wait(&req->wait_queue);
2337 self->waiting_for = NULL;
2352 * -EINVAL - backing format specified, but no file
2353 * -ENOSPC - can't update the backing file because no space is left in the
2355 * -ENOTSUP - format driver doesn't support changing the backing file
2357 int bdrv_change_backing_file(BlockDriverState *bs,
2358 const char *backing_file, const char *backing_fmt)
2360 BlockDriver *drv = bs->drv;
2363 /* Backing file format doesn't make sense without a backing file */
2364 if (backing_fmt && !backing_file) {
2368 if (drv->bdrv_change_backing_file != NULL) {
2369 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2375 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2376 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2382 * Finds the image layer in the chain that has 'bs' as its backing file.
2384 * active is the current topmost image.
2386 * Returns NULL if bs is not found in active's image chain,
2387 * or if active == bs.
2389 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2390 BlockDriverState *bs)
2392 BlockDriverState *overlay = NULL;
2393 BlockDriverState *intermediate;
2395 assert(active != NULL);
2398 /* if bs is the same as active, then by definition it has no overlay
2404 intermediate = active;
2405 while (intermediate->backing_hd) {
2406 if (intermediate->backing_hd == bs) {
2407 overlay = intermediate;
2410 intermediate = intermediate->backing_hd;
2416 typedef struct BlkIntermediateStates {
2417 BlockDriverState *bs;
2418 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2419 } BlkIntermediateStates;
2423 * Drops images above 'base' up to and including 'top', and sets the image
2424 * above 'top' to have base as its backing file.
2426 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2427 * information in 'bs' can be properly updated.
2429 * E.g., this will convert the following chain:
2430 * bottom <- base <- intermediate <- top <- active
2434 * bottom <- base <- active
2436 * It is allowed for bottom==base, in which case it converts:
2438 * base <- intermediate <- top <- active
2445 * if active == top, that is considered an error
2448 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2449 BlockDriverState *base)
2451 BlockDriverState *intermediate;
2452 BlockDriverState *base_bs = NULL;
2453 BlockDriverState *new_top_bs = NULL;
2454 BlkIntermediateStates *intermediate_state, *next;
2457 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2458 QSIMPLEQ_INIT(&states_to_delete);
2460 if (!top->drv || !base->drv) {
2464 new_top_bs = bdrv_find_overlay(active, top);
2466 if (new_top_bs == NULL) {
2467 /* we could not find the image above 'top', this is an error */
2471 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2472 * to do, no intermediate images */
2473 if (new_top_bs->backing_hd == base) {
2480 /* now we will go down through the list, and add each BDS we find
2481 * into our deletion queue, until we hit the 'base'
2483 while (intermediate) {
2484 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2485 intermediate_state->bs = intermediate;
2486 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2488 if (intermediate->backing_hd == base) {
2489 base_bs = intermediate->backing_hd;
2492 intermediate = intermediate->backing_hd;
2494 if (base_bs == NULL) {
2495 /* something went wrong, we did not end at the base. safely
2496 * unravel everything, and exit with error */
2500 /* success - we can delete the intermediate states, and link top->base */
2501 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2502 base_bs->drv ? base_bs->drv->format_name : "");
2506 new_top_bs->backing_hd = base_bs;
2508 bdrv_refresh_limits(new_top_bs);
2510 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2511 /* so that bdrv_close() does not recursively close the chain */
2512 intermediate_state->bs->backing_hd = NULL;
2513 bdrv_unref(intermediate_state->bs);
2518 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2519 g_free(intermediate_state);
2525 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2530 if (!bdrv_is_inserted(bs))
2536 len = bdrv_getlength(bs);
2541 if ((offset > len) || (len - offset < size))
2547 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2550 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2551 nb_sectors * BDRV_SECTOR_SIZE);
2554 typedef struct RwCo {
2555 BlockDriverState *bs;
2560 BdrvRequestFlags flags;
2563 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2565 RwCo *rwco = opaque;
2567 if (!rwco->is_write) {
2568 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2569 rwco->qiov->size, rwco->qiov,
2572 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2573 rwco->qiov->size, rwco->qiov,
2579 * Process a vectored synchronous request using coroutines
2581 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2582 QEMUIOVector *qiov, bool is_write,
2583 BdrvRequestFlags flags)
2590 .is_write = is_write,
2596 * In sync call context, when the vcpu is blocked, this throttling timer
2597 * will not fire; so the I/O throttling function has to be disabled here
2598 * if it has been enabled.
2600 if (bs->io_limits_enabled) {
2601 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2602 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2603 bdrv_io_limits_disable(bs);
2606 if (qemu_in_coroutine()) {
2607 /* Fast-path if already in coroutine context */
2608 bdrv_rw_co_entry(&rwco);
2610 co = qemu_coroutine_create(bdrv_rw_co_entry);
2611 qemu_coroutine_enter(co, &rwco);
2612 while (rwco.ret == NOT_DONE) {
2620 * Process a synchronous request using coroutines
2622 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2623 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2626 struct iovec iov = {
2627 .iov_base = (void *)buf,
2628 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2631 qemu_iovec_init_external(&qiov, &iov, 1);
2632 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2633 &qiov, is_write, flags);
2636 /* return < 0 if error. See bdrv_write() for the return codes */
2637 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2638 uint8_t *buf, int nb_sectors)
2640 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2643 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2644 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2645 uint8_t *buf, int nb_sectors)
2650 enabled = bs->io_limits_enabled;
2651 bs->io_limits_enabled = false;
2652 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2653 bs->io_limits_enabled = enabled;
2657 /* Return < 0 if error. Important errors are:
2658 -EIO generic I/O error (may happen for all errors)
2659 -ENOMEDIUM No media inserted.
2660 -EINVAL Invalid sector number or nb_sectors
2661 -EACCES Trying to write a read-only device
2663 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2664 const uint8_t *buf, int nb_sectors)
2666 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2669 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2670 int nb_sectors, BdrvRequestFlags flags)
2672 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2673 BDRV_REQ_ZERO_WRITE | flags);
2677 * Completely zero out a block device with the help of bdrv_write_zeroes.
2678 * The operation is sped up by checking the block status and only writing
2679 * zeroes to the device if they currently do not return zeroes. Optional
2680 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2682 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2684 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2686 int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
2687 int64_t ret, nb_sectors, sector_num = 0;
2691 nb_sectors = target_size - sector_num;
2692 if (nb_sectors <= 0) {
2695 if (nb_sectors > INT_MAX) {
2696 nb_sectors = INT_MAX;
2698 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2700 error_report("error getting block status at sector %" PRId64 ": %s",
2701 sector_num, strerror(-ret));
2704 if (ret & BDRV_BLOCK_ZERO) {
2708 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2710 error_report("error writing zeroes at sector %" PRId64 ": %s",
2711 sector_num, strerror(-ret));
2718 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2721 struct iovec iov = {
2722 .iov_base = (void *)buf,
2731 qemu_iovec_init_external(&qiov, &iov, 1);
2732 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2740 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2744 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2752 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2753 const void *buf, int bytes)
2756 struct iovec iov = {
2757 .iov_base = (void *) buf,
2765 qemu_iovec_init_external(&qiov, &iov, 1);
2766 return bdrv_pwritev(bs, offset, &qiov);
2770 * Writes to the file and ensures that no writes are reordered across this
2771 * request (acts as a barrier)
2773 * Returns 0 on success, -errno in error cases.
2775 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2776 const void *buf, int count)
2780 ret = bdrv_pwrite(bs, offset, buf, count);
2785 /* No flush needed for cache modes that already do it */
2786 if (bs->enable_write_cache) {
2793 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2794 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2796 /* Perform I/O through a temporary buffer so that users who scribble over
2797 * their read buffer while the operation is in progress do not end up
2798 * modifying the image file. This is critical for zero-copy guest I/O
2799 * where anything might happen inside guest memory.
2801 void *bounce_buffer;
2803 BlockDriver *drv = bs->drv;
2805 QEMUIOVector bounce_qiov;
2806 int64_t cluster_sector_num;
2807 int cluster_nb_sectors;
2811 /* Cover entire cluster so no additional backing file I/O is required when
2812 * allocating cluster in the image file.
2814 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2815 &cluster_sector_num, &cluster_nb_sectors);
2817 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2818 cluster_sector_num, cluster_nb_sectors);
2820 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2821 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2822 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2824 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2830 if (drv->bdrv_co_write_zeroes &&
2831 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2832 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2833 cluster_nb_sectors, 0);
2835 /* This does not change the data on the disk, it is not necessary
2836 * to flush even in cache=writethrough mode.
2838 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2843 /* It might be okay to ignore write errors for guest requests. If this
2844 * is a deliberate copy-on-read then we don't want to ignore the error.
2845 * Simply report it in all cases.
2850 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2851 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2852 nb_sectors * BDRV_SECTOR_SIZE);
2855 qemu_vfree(bounce_buffer);
2860 * Forwards an already correctly aligned request to the BlockDriver. This
2861 * handles copy on read and zeroing after EOF; any other features must be
2862 * implemented by the caller.
2864 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
2865 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
2866 int64_t align, QEMUIOVector *qiov, int flags)
2868 BlockDriver *drv = bs->drv;
2871 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
2872 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
2874 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
2875 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
2877 /* Handle Copy on Read and associated serialisation */
2878 if (flags & BDRV_REQ_COPY_ON_READ) {
2879 /* If we touch the same cluster it counts as an overlap. This
2880 * guarantees that allocating writes will be serialized and not race
2881 * with each other for the same cluster. For example, in copy-on-read
2882 * it ensures that the CoR read and write operations are atomic and
2883 * guest writes cannot interleave between them. */
2884 mark_request_serialising(req, bdrv_get_cluster_size(bs));
2887 wait_serialising_requests(req);
2889 if (flags & BDRV_REQ_COPY_ON_READ) {
2892 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2897 if (!ret || pnum != nb_sectors) {
2898 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2903 /* Forward the request to the BlockDriver */
2904 if (!(bs->zero_beyond_eof && bs->growable)) {
2905 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2907 /* Read zeros after EOF of growable BDSes */
2908 int64_t len, total_sectors, max_nb_sectors;
2910 len = bdrv_getlength(bs);
2916 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
2917 max_nb_sectors = MAX(0, ROUND_UP(total_sectors - sector_num,
2918 align >> BDRV_SECTOR_BITS));
2919 if (max_nb_sectors > 0) {
2920 ret = drv->bdrv_co_readv(bs, sector_num,
2921 MIN(nb_sectors, max_nb_sectors), qiov);
2926 /* Reading beyond end of file is supposed to produce zeroes */
2927 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2928 uint64_t offset = MAX(0, total_sectors - sector_num);
2929 uint64_t bytes = (sector_num + nb_sectors - offset) *
2931 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
2940 * Handle a read request in coroutine context
2942 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
2943 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
2944 BdrvRequestFlags flags)
2946 BlockDriver *drv = bs->drv;
2947 BdrvTrackedRequest req;
2949 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
2950 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
2951 uint8_t *head_buf = NULL;
2952 uint8_t *tail_buf = NULL;
2953 QEMUIOVector local_qiov;
2954 bool use_local_qiov = false;
2960 if (bdrv_check_byte_request(bs, offset, bytes)) {
2964 if (bs->copy_on_read) {
2965 flags |= BDRV_REQ_COPY_ON_READ;
2968 /* throttling disk I/O */
2969 if (bs->io_limits_enabled) {
2970 bdrv_io_limits_intercept(bs, bytes, false);
2973 /* Align read if necessary by padding qiov */
2974 if (offset & (align - 1)) {
2975 head_buf = qemu_blockalign(bs, align);
2976 qemu_iovec_init(&local_qiov, qiov->niov + 2);
2977 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
2978 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
2979 use_local_qiov = true;
2981 bytes += offset & (align - 1);
2982 offset = offset & ~(align - 1);
2985 if ((offset + bytes) & (align - 1)) {
2986 if (!use_local_qiov) {
2987 qemu_iovec_init(&local_qiov, qiov->niov + 1);
2988 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
2989 use_local_qiov = true;
2991 tail_buf = qemu_blockalign(bs, align);
2992 qemu_iovec_add(&local_qiov, tail_buf,
2993 align - ((offset + bytes) & (align - 1)));
2995 bytes = ROUND_UP(bytes, align);
2998 tracked_request_begin(&req, bs, offset, bytes, false);
2999 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3000 use_local_qiov ? &local_qiov : qiov,
3002 tracked_request_end(&req);
3004 if (use_local_qiov) {
3005 qemu_iovec_destroy(&local_qiov);
3006 qemu_vfree(head_buf);
3007 qemu_vfree(tail_buf);
3013 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3014 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3015 BdrvRequestFlags flags)
3017 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3021 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3022 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3025 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3026 int nb_sectors, QEMUIOVector *qiov)
3028 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3030 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3033 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3034 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3036 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3038 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3039 BDRV_REQ_COPY_ON_READ);
3042 /* if no limit is specified in the BlockLimits use a default
3043 * of 32768 512-byte sectors (16 MiB) per request.
3045 #define MAX_WRITE_ZEROES_DEFAULT 32768
3047 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3048 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3050 BlockDriver *drv = bs->drv;
3052 struct iovec iov = {0};
3055 int max_write_zeroes = bs->bl.max_write_zeroes ?
3056 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3058 while (nb_sectors > 0 && !ret) {
3059 int num = nb_sectors;
3061 /* Align request. Block drivers can expect the "bulk" of the request
3064 if (bs->bl.write_zeroes_alignment
3065 && num > bs->bl.write_zeroes_alignment) {
3066 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3067 /* Make a small request up to the first aligned sector. */
3068 num = bs->bl.write_zeroes_alignment;
3069 num -= sector_num % bs->bl.write_zeroes_alignment;
3070 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3071 /* Shorten the request to the last aligned sector. num cannot
3072 * underflow because num > bs->bl.write_zeroes_alignment.
3074 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3078 /* limit request size */
3079 if (num > max_write_zeroes) {
3080 num = max_write_zeroes;
3084 /* First try the efficient write zeroes operation */
3085 if (drv->bdrv_co_write_zeroes) {
3086 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3089 if (ret == -ENOTSUP) {
3090 /* Fall back to bounce buffer if write zeroes is unsupported */
3091 iov.iov_len = num * BDRV_SECTOR_SIZE;
3092 if (iov.iov_base == NULL) {
3093 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3094 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3096 qemu_iovec_init_external(&qiov, &iov, 1);
3098 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3100 /* Keep bounce buffer around if it is big enough for all
3101 * all future requests.
3103 if (num < max_write_zeroes) {
3104 qemu_vfree(iov.iov_base);
3105 iov.iov_base = NULL;
3113 qemu_vfree(iov.iov_base);
3118 * Forwards an already correctly aligned write request to the BlockDriver.
3120 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3121 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3122 QEMUIOVector *qiov, int flags)
3124 BlockDriver *drv = bs->drv;
3128 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3129 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3131 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3132 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3134 waited = wait_serialising_requests(req);
3135 assert(!waited || !req->serialising);
3137 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3140 /* Do nothing, write notifier decided to fail this request */
3141 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3142 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3143 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3145 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3146 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3148 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3150 if (ret == 0 && !bs->enable_write_cache) {
3151 ret = bdrv_co_flush(bs);
3154 bdrv_set_dirty(bs, sector_num, nb_sectors);
3156 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3157 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3159 if (bs->growable && ret >= 0) {
3160 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3167 * Handle a write request in coroutine context
3169 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3170 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3171 BdrvRequestFlags flags)
3173 BdrvTrackedRequest req;
3174 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3175 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3176 uint8_t *head_buf = NULL;
3177 uint8_t *tail_buf = NULL;
3178 QEMUIOVector local_qiov;
3179 bool use_local_qiov = false;
3185 if (bs->read_only) {
3188 if (bdrv_check_byte_request(bs, offset, bytes)) {
3192 /* throttling disk I/O */
3193 if (bs->io_limits_enabled) {
3194 bdrv_io_limits_intercept(bs, bytes, true);
3198 * Align write if necessary by performing a read-modify-write cycle.
3199 * Pad qiov with the read parts and be sure to have a tracked request not
3200 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3202 tracked_request_begin(&req, bs, offset, bytes, true);
3204 if (offset & (align - 1)) {
3205 QEMUIOVector head_qiov;
3206 struct iovec head_iov;
3208 mark_request_serialising(&req, align);
3209 wait_serialising_requests(&req);
3211 head_buf = qemu_blockalign(bs, align);
3212 head_iov = (struct iovec) {
3213 .iov_base = head_buf,
3216 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3218 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3219 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3220 align, &head_qiov, 0);
3224 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3226 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3227 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3228 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3229 use_local_qiov = true;
3231 bytes += offset & (align - 1);
3232 offset = offset & ~(align - 1);
3235 if ((offset + bytes) & (align - 1)) {
3236 QEMUIOVector tail_qiov;
3237 struct iovec tail_iov;
3241 mark_request_serialising(&req, align);
3242 waited = wait_serialising_requests(&req);
3243 assert(!waited || !use_local_qiov);
3245 tail_buf = qemu_blockalign(bs, align);
3246 tail_iov = (struct iovec) {
3247 .iov_base = tail_buf,
3250 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3252 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3253 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3254 align, &tail_qiov, 0);
3258 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3260 if (!use_local_qiov) {
3261 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3262 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3263 use_local_qiov = true;
3266 tail_bytes = (offset + bytes) & (align - 1);
3267 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3269 bytes = ROUND_UP(bytes, align);
3272 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3273 use_local_qiov ? &local_qiov : qiov,
3277 tracked_request_end(&req);
3279 if (use_local_qiov) {
3280 qemu_iovec_destroy(&local_qiov);
3281 qemu_vfree(head_buf);
3282 qemu_vfree(tail_buf);
3288 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3289 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3290 BdrvRequestFlags flags)
3292 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3296 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3297 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3300 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3301 int nb_sectors, QEMUIOVector *qiov)
3303 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3305 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3308 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3309 int64_t sector_num, int nb_sectors,
3310 BdrvRequestFlags flags)
3312 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3314 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3315 flags &= ~BDRV_REQ_MAY_UNMAP;
3318 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3319 BDRV_REQ_ZERO_WRITE | flags);
3323 * Truncate file to 'offset' bytes (needed only for file protocols)
3325 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3327 BlockDriver *drv = bs->drv;
3331 if (!drv->bdrv_truncate)
3335 if (bdrv_in_use(bs))
3337 ret = drv->bdrv_truncate(bs, offset);
3339 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3340 bdrv_dev_resize_cb(bs);
3346 * Length of a allocated file in bytes. Sparse files are counted by actual
3347 * allocated space. Return < 0 if error or unknown.
3349 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3351 BlockDriver *drv = bs->drv;
3355 if (drv->bdrv_get_allocated_file_size) {
3356 return drv->bdrv_get_allocated_file_size(bs);
3359 return bdrv_get_allocated_file_size(bs->file);
3365 * Length of a file in bytes. Return < 0 if error or unknown.
3367 int64_t bdrv_getlength(BlockDriverState *bs)
3369 BlockDriver *drv = bs->drv;
3373 if (drv->has_variable_length) {
3374 int ret = refresh_total_sectors(bs, bs->total_sectors);
3379 return bs->total_sectors * BDRV_SECTOR_SIZE;
3382 /* return 0 as number of sectors if no device present or error */
3383 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3386 length = bdrv_getlength(bs);
3390 length = length >> BDRV_SECTOR_BITS;
3391 *nb_sectors_ptr = length;
3394 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3395 BlockdevOnError on_write_error)
3397 bs->on_read_error = on_read_error;
3398 bs->on_write_error = on_write_error;
3401 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3403 return is_read ? bs->on_read_error : bs->on_write_error;
3406 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3408 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3411 case BLOCKDEV_ON_ERROR_ENOSPC:
3412 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
3413 case BLOCKDEV_ON_ERROR_STOP:
3414 return BDRV_ACTION_STOP;
3415 case BLOCKDEV_ON_ERROR_REPORT:
3416 return BDRV_ACTION_REPORT;
3417 case BLOCKDEV_ON_ERROR_IGNORE:
3418 return BDRV_ACTION_IGNORE;
3424 /* This is done by device models because, while the block layer knows
3425 * about the error, it does not know whether an operation comes from
3426 * the device or the block layer (from a job, for example).
3428 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3429 bool is_read, int error)
3432 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3433 if (action == BDRV_ACTION_STOP) {
3434 vm_stop(RUN_STATE_IO_ERROR);
3435 bdrv_iostatus_set_err(bs, error);
3439 int bdrv_is_read_only(BlockDriverState *bs)
3441 return bs->read_only;
3444 int bdrv_is_sg(BlockDriverState *bs)
3449 int bdrv_enable_write_cache(BlockDriverState *bs)
3451 return bs->enable_write_cache;
3454 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3456 bs->enable_write_cache = wce;
3458 /* so a reopen() will preserve wce */
3460 bs->open_flags |= BDRV_O_CACHE_WB;
3462 bs->open_flags &= ~BDRV_O_CACHE_WB;
3466 int bdrv_is_encrypted(BlockDriverState *bs)
3468 if (bs->backing_hd && bs->backing_hd->encrypted)
3470 return bs->encrypted;
3473 int bdrv_key_required(BlockDriverState *bs)
3475 BlockDriverState *backing_hd = bs->backing_hd;
3477 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3479 return (bs->encrypted && !bs->valid_key);
3482 int bdrv_set_key(BlockDriverState *bs, const char *key)
3485 if (bs->backing_hd && bs->backing_hd->encrypted) {
3486 ret = bdrv_set_key(bs->backing_hd, key);
3492 if (!bs->encrypted) {
3494 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3497 ret = bs->drv->bdrv_set_key(bs, key);
3500 } else if (!bs->valid_key) {
3502 /* call the change callback now, we skipped it on open */
3503 bdrv_dev_change_media_cb(bs, true);
3508 const char *bdrv_get_format_name(BlockDriverState *bs)
3510 return bs->drv ? bs->drv->format_name : NULL;
3513 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3518 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3519 it(opaque, drv->format_name);
3523 /* This function is to find block backend bs */
3524 BlockDriverState *bdrv_find(const char *name)
3526 BlockDriverState *bs;
3528 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3529 if (!strcmp(name, bs->device_name)) {
3536 /* This function is to find a node in the bs graph */
3537 BlockDriverState *bdrv_find_node(const char *node_name)
3539 BlockDriverState *bs;
3543 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3544 if (!strcmp(node_name, bs->node_name)) {
3551 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3552 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3554 BlockDeviceInfoList *list, *entry;
3555 BlockDriverState *bs;
3558 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3559 entry = g_malloc0(sizeof(*entry));
3560 entry->value = bdrv_block_device_info(bs);
3568 BlockDriverState *bdrv_lookup_bs(const char *device,
3569 const char *node_name,
3572 BlockDriverState *bs = NULL;
3574 if ((!device && !node_name) || (device && node_name)) {
3575 error_setg(errp, "Use either device or node-name but not both");
3580 bs = bdrv_find(device);
3583 error_set(errp, QERR_DEVICE_NOT_FOUND, device);
3590 bs = bdrv_find_node(node_name);
3593 error_set(errp, QERR_DEVICE_NOT_FOUND, node_name);
3600 BlockDriverState *bdrv_next(BlockDriverState *bs)
3603 return QTAILQ_FIRST(&bdrv_states);
3605 return QTAILQ_NEXT(bs, device_list);
3608 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3610 BlockDriverState *bs;
3612 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3617 const char *bdrv_get_device_name(BlockDriverState *bs)
3619 return bs->device_name;
3622 int bdrv_get_flags(BlockDriverState *bs)
3624 return bs->open_flags;
3627 int bdrv_flush_all(void)
3629 BlockDriverState *bs;
3632 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3633 int ret = bdrv_flush(bs);
3634 if (ret < 0 && !result) {
3642 int bdrv_has_zero_init_1(BlockDriverState *bs)
3647 int bdrv_has_zero_init(BlockDriverState *bs)
3651 /* If BS is a copy on write image, it is initialized to
3652 the contents of the base image, which may not be zeroes. */
3653 if (bs->backing_hd) {
3656 if (bs->drv->bdrv_has_zero_init) {
3657 return bs->drv->bdrv_has_zero_init(bs);
3664 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3666 BlockDriverInfo bdi;
3668 if (bs->backing_hd) {
3672 if (bdrv_get_info(bs, &bdi) == 0) {
3673 return bdi.unallocated_blocks_are_zero;
3679 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3681 BlockDriverInfo bdi;
3683 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3687 if (bdrv_get_info(bs, &bdi) == 0) {
3688 return bdi.can_write_zeroes_with_unmap;
3694 typedef struct BdrvCoGetBlockStatusData {
3695 BlockDriverState *bs;
3696 BlockDriverState *base;
3702 } BdrvCoGetBlockStatusData;
3705 * Returns true iff the specified sector is present in the disk image. Drivers
3706 * not implementing the functionality are assumed to not support backing files,
3707 * hence all their sectors are reported as allocated.
3709 * If 'sector_num' is beyond the end of the disk image the return value is 0
3710 * and 'pnum' is set to 0.
3712 * 'pnum' is set to the number of sectors (including and immediately following
3713 * the specified sector) that are known to be in the same
3714 * allocated/unallocated state.
3716 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3717 * beyond the end of the disk image it will be clamped.
3719 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3721 int nb_sectors, int *pnum)
3727 length = bdrv_getlength(bs);
3732 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3737 n = bs->total_sectors - sector_num;
3738 if (n < nb_sectors) {
3742 if (!bs->drv->bdrv_co_get_block_status) {
3744 ret = BDRV_BLOCK_DATA;
3745 if (bs->drv->protocol_name) {
3746 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3751 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3757 if (ret & BDRV_BLOCK_RAW) {
3758 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3759 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3763 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3764 if (bdrv_unallocated_blocks_are_zero(bs)) {
3765 ret |= BDRV_BLOCK_ZERO;
3766 } else if (bs->backing_hd) {
3767 BlockDriverState *bs2 = bs->backing_hd;
3768 int64_t length2 = bdrv_getlength(bs2);
3769 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3770 ret |= BDRV_BLOCK_ZERO;
3776 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3777 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3778 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3781 /* Ignore errors. This is just providing extra information, it
3782 * is useful but not necessary.
3784 ret |= (ret2 & BDRV_BLOCK_ZERO);
3791 /* Coroutine wrapper for bdrv_get_block_status() */
3792 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3794 BdrvCoGetBlockStatusData *data = opaque;
3795 BlockDriverState *bs = data->bs;
3797 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3803 * Synchronous wrapper around bdrv_co_get_block_status().
3805 * See bdrv_co_get_block_status() for details.
3807 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3808 int nb_sectors, int *pnum)
3811 BdrvCoGetBlockStatusData data = {
3813 .sector_num = sector_num,
3814 .nb_sectors = nb_sectors,
3819 if (qemu_in_coroutine()) {
3820 /* Fast-path if already in coroutine context */
3821 bdrv_get_block_status_co_entry(&data);
3823 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3824 qemu_coroutine_enter(co, &data);
3825 while (!data.done) {
3832 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3833 int nb_sectors, int *pnum)
3835 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3840 (ret & BDRV_BLOCK_DATA) ||
3841 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3845 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3847 * Return true if the given sector is allocated in any image between
3848 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3849 * sector is allocated in any image of the chain. Return false otherwise.
3851 * 'pnum' is set to the number of sectors (including and immediately following
3852 * the specified sector) that are known to be in the same
3853 * allocated/unallocated state.
3856 int bdrv_is_allocated_above(BlockDriverState *top,
3857 BlockDriverState *base,
3859 int nb_sectors, int *pnum)
3861 BlockDriverState *intermediate;
3862 int ret, n = nb_sectors;
3865 while (intermediate && intermediate != base) {
3867 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3877 * [sector_num, nb_sectors] is unallocated on top but intermediate
3880 * [sector_num+x, nr_sectors] allocated.
3882 if (n > pnum_inter &&
3883 (intermediate == top ||
3884 sector_num + pnum_inter < intermediate->total_sectors)) {
3888 intermediate = intermediate->backing_hd;
3895 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3897 if (bs->backing_hd && bs->backing_hd->encrypted)
3898 return bs->backing_file;
3899 else if (bs->encrypted)
3900 return bs->filename;
3905 void bdrv_get_backing_filename(BlockDriverState *bs,
3906 char *filename, int filename_size)
3908 pstrcpy(filename, filename_size, bs->backing_file);
3911 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3912 const uint8_t *buf, int nb_sectors)
3914 BlockDriver *drv = bs->drv;
3917 if (!drv->bdrv_write_compressed)
3919 if (bdrv_check_request(bs, sector_num, nb_sectors))
3922 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
3924 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3927 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3929 BlockDriver *drv = bs->drv;
3932 if (!drv->bdrv_get_info)
3934 memset(bdi, 0, sizeof(*bdi));
3935 return drv->bdrv_get_info(bs, bdi);
3938 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
3940 BlockDriver *drv = bs->drv;
3941 if (drv && drv->bdrv_get_specific_info) {
3942 return drv->bdrv_get_specific_info(bs);
3947 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3948 int64_t pos, int size)
3951 struct iovec iov = {
3952 .iov_base = (void *) buf,
3956 qemu_iovec_init_external(&qiov, &iov, 1);
3957 return bdrv_writev_vmstate(bs, &qiov, pos);
3960 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3962 BlockDriver *drv = bs->drv;
3966 } else if (drv->bdrv_save_vmstate) {
3967 return drv->bdrv_save_vmstate(bs, qiov, pos);
3968 } else if (bs->file) {
3969 return bdrv_writev_vmstate(bs->file, qiov, pos);
3975 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3976 int64_t pos, int size)
3978 BlockDriver *drv = bs->drv;
3981 if (drv->bdrv_load_vmstate)
3982 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3984 return bdrv_load_vmstate(bs->file, buf, pos, size);
3988 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
3990 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
3994 bs->drv->bdrv_debug_event(bs, event);
3997 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4000 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4004 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4005 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4011 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4013 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4017 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4018 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4024 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4026 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
4030 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4031 return bs->drv->bdrv_debug_resume(bs, tag);
4037 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4039 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4043 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4044 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4050 int bdrv_is_snapshot(BlockDriverState *bs)
4052 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4055 /* backing_file can either be relative, or absolute, or a protocol. If it is
4056 * relative, it must be relative to the chain. So, passing in bs->filename
4057 * from a BDS as backing_file should not be done, as that may be relative to
4058 * the CWD rather than the chain. */
4059 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4060 const char *backing_file)
4062 char *filename_full = NULL;
4063 char *backing_file_full = NULL;
4064 char *filename_tmp = NULL;
4065 int is_protocol = 0;
4066 BlockDriverState *curr_bs = NULL;
4067 BlockDriverState *retval = NULL;
4069 if (!bs || !bs->drv || !backing_file) {
4073 filename_full = g_malloc(PATH_MAX);
4074 backing_file_full = g_malloc(PATH_MAX);
4075 filename_tmp = g_malloc(PATH_MAX);
4077 is_protocol = path_has_protocol(backing_file);
4079 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4081 /* If either of the filename paths is actually a protocol, then
4082 * compare unmodified paths; otherwise make paths relative */
4083 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4084 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4085 retval = curr_bs->backing_hd;
4089 /* If not an absolute filename path, make it relative to the current
4090 * image's filename path */
4091 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4094 /* We are going to compare absolute pathnames */
4095 if (!realpath(filename_tmp, filename_full)) {
4099 /* We need to make sure the backing filename we are comparing against
4100 * is relative to the current image filename (or absolute) */
4101 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4102 curr_bs->backing_file);
4104 if (!realpath(filename_tmp, backing_file_full)) {
4108 if (strcmp(backing_file_full, filename_full) == 0) {
4109 retval = curr_bs->backing_hd;
4115 g_free(filename_full);
4116 g_free(backing_file_full);
4117 g_free(filename_tmp);
4121 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4127 if (!bs->backing_hd) {
4131 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4134 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4136 BlockDriverState *curr_bs = NULL;
4144 while (curr_bs->backing_hd) {
4145 curr_bs = curr_bs->backing_hd;
4150 /**************************************************************/
4153 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4154 QEMUIOVector *qiov, int nb_sectors,
4155 BlockDriverCompletionFunc *cb, void *opaque)
4157 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4159 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4163 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4164 QEMUIOVector *qiov, int nb_sectors,
4165 BlockDriverCompletionFunc *cb, void *opaque)
4167 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4169 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4173 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4174 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4175 BlockDriverCompletionFunc *cb, void *opaque)
4177 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4179 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4180 BDRV_REQ_ZERO_WRITE | flags,
4185 typedef struct MultiwriteCB {
4190 BlockDriverCompletionFunc *cb;
4192 QEMUIOVector *free_qiov;
4196 static void multiwrite_user_cb(MultiwriteCB *mcb)
4200 for (i = 0; i < mcb->num_callbacks; i++) {
4201 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4202 if (mcb->callbacks[i].free_qiov) {
4203 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4205 g_free(mcb->callbacks[i].free_qiov);
4209 static void multiwrite_cb(void *opaque, int ret)
4211 MultiwriteCB *mcb = opaque;
4213 trace_multiwrite_cb(mcb, ret);
4215 if (ret < 0 && !mcb->error) {
4219 mcb->num_requests--;
4220 if (mcb->num_requests == 0) {
4221 multiwrite_user_cb(mcb);
4226 static int multiwrite_req_compare(const void *a, const void *b)
4228 const BlockRequest *req1 = a, *req2 = b;
4231 * Note that we can't simply subtract req2->sector from req1->sector
4232 * here as that could overflow the return value.
4234 if (req1->sector > req2->sector) {
4236 } else if (req1->sector < req2->sector) {
4244 * Takes a bunch of requests and tries to merge them. Returns the number of
4245 * requests that remain after merging.
4247 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4248 int num_reqs, MultiwriteCB *mcb)
4252 // Sort requests by start sector
4253 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4255 // Check if adjacent requests touch the same clusters. If so, combine them,
4256 // filling up gaps with zero sectors.
4258 for (i = 1; i < num_reqs; i++) {
4260 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4262 // Handle exactly sequential writes and overlapping writes.
4263 if (reqs[i].sector <= oldreq_last) {
4267 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4273 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4274 qemu_iovec_init(qiov,
4275 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4277 // Add the first request to the merged one. If the requests are
4278 // overlapping, drop the last sectors of the first request.
4279 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4280 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4282 // We should need to add any zeros between the two requests
4283 assert (reqs[i].sector <= oldreq_last);
4285 // Add the second request
4286 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4288 reqs[outidx].nb_sectors = qiov->size >> 9;
4289 reqs[outidx].qiov = qiov;
4291 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4294 reqs[outidx].sector = reqs[i].sector;
4295 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4296 reqs[outidx].qiov = reqs[i].qiov;
4304 * Submit multiple AIO write requests at once.
4306 * On success, the function returns 0 and all requests in the reqs array have
4307 * been submitted. In error case this function returns -1, and any of the
4308 * requests may or may not be submitted yet. In particular, this means that the
4309 * callback will be called for some of the requests, for others it won't. The
4310 * caller must check the error field of the BlockRequest to wait for the right
4311 * callbacks (if error != 0, no callback will be called).
4313 * The implementation may modify the contents of the reqs array, e.g. to merge
4314 * requests. However, the fields opaque and error are left unmodified as they
4315 * are used to signal failure for a single request to the caller.
4317 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4322 /* don't submit writes if we don't have a medium */
4323 if (bs->drv == NULL) {
4324 for (i = 0; i < num_reqs; i++) {
4325 reqs[i].error = -ENOMEDIUM;
4330 if (num_reqs == 0) {
4334 // Create MultiwriteCB structure
4335 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4336 mcb->num_requests = 0;
4337 mcb->num_callbacks = num_reqs;
4339 for (i = 0; i < num_reqs; i++) {
4340 mcb->callbacks[i].cb = reqs[i].cb;
4341 mcb->callbacks[i].opaque = reqs[i].opaque;
4344 // Check for mergable requests
4345 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4347 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4349 /* Run the aio requests. */
4350 mcb->num_requests = num_reqs;
4351 for (i = 0; i < num_reqs; i++) {
4352 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4353 reqs[i].nb_sectors, reqs[i].flags,
4361 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4363 acb->aiocb_info->cancel(acb);
4366 /**************************************************************/
4367 /* async block device emulation */
4369 typedef struct BlockDriverAIOCBSync {
4370 BlockDriverAIOCB common;
4373 /* vector translation state */
4377 } BlockDriverAIOCBSync;
4379 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4381 BlockDriverAIOCBSync *acb =
4382 container_of(blockacb, BlockDriverAIOCBSync, common);
4383 qemu_bh_delete(acb->bh);
4385 qemu_aio_release(acb);
4388 static const AIOCBInfo bdrv_em_aiocb_info = {
4389 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4390 .cancel = bdrv_aio_cancel_em,
4393 static void bdrv_aio_bh_cb(void *opaque)
4395 BlockDriverAIOCBSync *acb = opaque;
4398 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4399 qemu_vfree(acb->bounce);
4400 acb->common.cb(acb->common.opaque, acb->ret);
4401 qemu_bh_delete(acb->bh);
4403 qemu_aio_release(acb);
4406 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4410 BlockDriverCompletionFunc *cb,
4415 BlockDriverAIOCBSync *acb;
4417 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4418 acb->is_write = is_write;
4420 acb->bounce = qemu_blockalign(bs, qiov->size);
4421 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4424 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4425 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4427 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4430 qemu_bh_schedule(acb->bh);
4432 return &acb->common;
4435 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4436 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4437 BlockDriverCompletionFunc *cb, void *opaque)
4439 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4442 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4443 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4444 BlockDriverCompletionFunc *cb, void *opaque)
4446 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4450 typedef struct BlockDriverAIOCBCoroutine {
4451 BlockDriverAIOCB common;
4456 } BlockDriverAIOCBCoroutine;
4458 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4460 BlockDriverAIOCBCoroutine *acb =
4461 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4470 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4471 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4472 .cancel = bdrv_aio_co_cancel_em,
4475 static void bdrv_co_em_bh(void *opaque)
4477 BlockDriverAIOCBCoroutine *acb = opaque;
4479 acb->common.cb(acb->common.opaque, acb->req.error);
4485 qemu_bh_delete(acb->bh);
4486 qemu_aio_release(acb);
4489 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4490 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4492 BlockDriverAIOCBCoroutine *acb = opaque;
4493 BlockDriverState *bs = acb->common.bs;
4495 if (!acb->is_write) {
4496 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4497 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4499 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4500 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4503 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4504 qemu_bh_schedule(acb->bh);
4507 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4511 BdrvRequestFlags flags,
4512 BlockDriverCompletionFunc *cb,
4517 BlockDriverAIOCBCoroutine *acb;
4519 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4520 acb->req.sector = sector_num;
4521 acb->req.nb_sectors = nb_sectors;
4522 acb->req.qiov = qiov;
4523 acb->req.flags = flags;
4524 acb->is_write = is_write;
4527 co = qemu_coroutine_create(bdrv_co_do_rw);
4528 qemu_coroutine_enter(co, acb);
4530 return &acb->common;
4533 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4535 BlockDriverAIOCBCoroutine *acb = opaque;
4536 BlockDriverState *bs = acb->common.bs;
4538 acb->req.error = bdrv_co_flush(bs);
4539 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4540 qemu_bh_schedule(acb->bh);
4543 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4544 BlockDriverCompletionFunc *cb, void *opaque)
4546 trace_bdrv_aio_flush(bs, opaque);
4549 BlockDriverAIOCBCoroutine *acb;
4551 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4554 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4555 qemu_coroutine_enter(co, acb);
4557 return &acb->common;
4560 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4562 BlockDriverAIOCBCoroutine *acb = opaque;
4563 BlockDriverState *bs = acb->common.bs;
4565 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4566 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4567 qemu_bh_schedule(acb->bh);
4570 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4571 int64_t sector_num, int nb_sectors,
4572 BlockDriverCompletionFunc *cb, void *opaque)
4575 BlockDriverAIOCBCoroutine *acb;
4577 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4579 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4580 acb->req.sector = sector_num;
4581 acb->req.nb_sectors = nb_sectors;
4583 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4584 qemu_coroutine_enter(co, acb);
4586 return &acb->common;
4589 void bdrv_init(void)
4591 module_call_init(MODULE_INIT_BLOCK);
4594 void bdrv_init_with_whitelist(void)
4596 use_bdrv_whitelist = 1;
4600 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4601 BlockDriverCompletionFunc *cb, void *opaque)
4603 BlockDriverAIOCB *acb;
4605 acb = g_slice_alloc(aiocb_info->aiocb_size);
4606 acb->aiocb_info = aiocb_info;
4609 acb->opaque = opaque;
4613 void qemu_aio_release(void *p)
4615 BlockDriverAIOCB *acb = p;
4616 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4619 /**************************************************************/
4620 /* Coroutine block device emulation */
4622 typedef struct CoroutineIOCompletion {
4623 Coroutine *coroutine;
4625 } CoroutineIOCompletion;
4627 static void bdrv_co_io_em_complete(void *opaque, int ret)
4629 CoroutineIOCompletion *co = opaque;
4632 qemu_coroutine_enter(co->coroutine, NULL);
4635 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4636 int nb_sectors, QEMUIOVector *iov,
4639 CoroutineIOCompletion co = {
4640 .coroutine = qemu_coroutine_self(),
4642 BlockDriverAIOCB *acb;
4645 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4646 bdrv_co_io_em_complete, &co);
4648 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4649 bdrv_co_io_em_complete, &co);
4652 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4656 qemu_coroutine_yield();
4661 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4662 int64_t sector_num, int nb_sectors,
4665 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4668 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4669 int64_t sector_num, int nb_sectors,
4672 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4675 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4677 RwCo *rwco = opaque;
4679 rwco->ret = bdrv_co_flush(rwco->bs);
4682 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4686 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4690 /* Write back cached data to the OS even with cache=unsafe */
4691 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4692 if (bs->drv->bdrv_co_flush_to_os) {
4693 ret = bs->drv->bdrv_co_flush_to_os(bs);
4699 /* But don't actually force it to the disk with cache=unsafe */
4700 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4704 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4705 if (bs->drv->bdrv_co_flush_to_disk) {
4706 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4707 } else if (bs->drv->bdrv_aio_flush) {
4708 BlockDriverAIOCB *acb;
4709 CoroutineIOCompletion co = {
4710 .coroutine = qemu_coroutine_self(),
4713 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4717 qemu_coroutine_yield();
4722 * Some block drivers always operate in either writethrough or unsafe
4723 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4724 * know how the server works (because the behaviour is hardcoded or
4725 * depends on server-side configuration), so we can't ensure that
4726 * everything is safe on disk. Returning an error doesn't work because
4727 * that would break guests even if the server operates in writethrough
4730 * Let's hope the user knows what he's doing.
4738 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4739 * in the case of cache=unsafe, so there are no useless flushes.
4742 return bdrv_co_flush(bs->file);
4745 void bdrv_invalidate_cache(BlockDriverState *bs)
4747 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4748 bs->drv->bdrv_invalidate_cache(bs);
4752 void bdrv_invalidate_cache_all(void)
4754 BlockDriverState *bs;
4756 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4757 bdrv_invalidate_cache(bs);
4761 void bdrv_clear_incoming_migration_all(void)
4763 BlockDriverState *bs;
4765 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4766 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4770 int bdrv_flush(BlockDriverState *bs)
4778 if (qemu_in_coroutine()) {
4779 /* Fast-path if already in coroutine context */
4780 bdrv_flush_co_entry(&rwco);
4782 co = qemu_coroutine_create(bdrv_flush_co_entry);
4783 qemu_coroutine_enter(co, &rwco);
4784 while (rwco.ret == NOT_DONE) {
4792 typedef struct DiscardCo {
4793 BlockDriverState *bs;
4798 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4800 DiscardCo *rwco = opaque;
4802 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4805 /* if no limit is specified in the BlockLimits use a default
4806 * of 32768 512-byte sectors (16 MiB) per request.
4808 #define MAX_DISCARD_DEFAULT 32768
4810 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4817 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4819 } else if (bs->read_only) {
4823 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4825 /* Do nothing if disabled. */
4826 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4830 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
4834 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4835 while (nb_sectors > 0) {
4837 int num = nb_sectors;
4840 if (bs->bl.discard_alignment &&
4841 num >= bs->bl.discard_alignment &&
4842 sector_num % bs->bl.discard_alignment) {
4843 if (num > bs->bl.discard_alignment) {
4844 num = bs->bl.discard_alignment;
4846 num -= sector_num % bs->bl.discard_alignment;
4849 /* limit request size */
4850 if (num > max_discard) {
4854 if (bs->drv->bdrv_co_discard) {
4855 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4857 BlockDriverAIOCB *acb;
4858 CoroutineIOCompletion co = {
4859 .coroutine = qemu_coroutine_self(),
4862 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4863 bdrv_co_io_em_complete, &co);
4867 qemu_coroutine_yield();
4871 if (ret && ret != -ENOTSUP) {
4881 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4886 .sector_num = sector_num,
4887 .nb_sectors = nb_sectors,
4891 if (qemu_in_coroutine()) {
4892 /* Fast-path if already in coroutine context */
4893 bdrv_discard_co_entry(&rwco);
4895 co = qemu_coroutine_create(bdrv_discard_co_entry);
4896 qemu_coroutine_enter(co, &rwco);
4897 while (rwco.ret == NOT_DONE) {
4905 /**************************************************************/
4906 /* removable device support */
4909 * Return TRUE if the media is present
4911 int bdrv_is_inserted(BlockDriverState *bs)
4913 BlockDriver *drv = bs->drv;
4917 if (!drv->bdrv_is_inserted)
4919 return drv->bdrv_is_inserted(bs);
4923 * Return whether the media changed since the last call to this
4924 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4926 int bdrv_media_changed(BlockDriverState *bs)
4928 BlockDriver *drv = bs->drv;
4930 if (drv && drv->bdrv_media_changed) {
4931 return drv->bdrv_media_changed(bs);
4937 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4939 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4941 BlockDriver *drv = bs->drv;
4943 if (drv && drv->bdrv_eject) {
4944 drv->bdrv_eject(bs, eject_flag);
4947 if (bs->device_name[0] != '\0') {
4948 bdrv_emit_qmp_eject_event(bs, eject_flag);
4953 * Lock or unlock the media (if it is locked, the user won't be able
4954 * to eject it manually).
4956 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4958 BlockDriver *drv = bs->drv;
4960 trace_bdrv_lock_medium(bs, locked);
4962 if (drv && drv->bdrv_lock_medium) {
4963 drv->bdrv_lock_medium(bs, locked);
4967 /* needed for generic scsi interface */
4969 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4971 BlockDriver *drv = bs->drv;
4973 if (drv && drv->bdrv_ioctl)
4974 return drv->bdrv_ioctl(bs, req, buf);
4978 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4979 unsigned long int req, void *buf,
4980 BlockDriverCompletionFunc *cb, void *opaque)
4982 BlockDriver *drv = bs->drv;
4984 if (drv && drv->bdrv_aio_ioctl)
4985 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4989 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
4991 bs->guest_block_size = align;
4994 void *qemu_blockalign(BlockDriverState *bs, size_t size)
4996 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5000 * Check if all memory in this vector is sector aligned.
5002 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5005 size_t alignment = bdrv_opt_mem_align(bs);
5007 for (i = 0; i < qiov->niov; i++) {
5008 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5011 if (qiov->iov[i].iov_len % alignment) {
5019 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
5021 int64_t bitmap_size;
5022 BdrvDirtyBitmap *bitmap;
5024 assert((granularity & (granularity - 1)) == 0);
5026 granularity >>= BDRV_SECTOR_BITS;
5027 assert(granularity);
5028 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
5029 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5030 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5031 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5035 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5037 BdrvDirtyBitmap *bm, *next;
5038 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5040 QLIST_REMOVE(bitmap, list);
5041 hbitmap_free(bitmap->bitmap);
5048 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5050 BdrvDirtyBitmap *bm;
5051 BlockDirtyInfoList *list = NULL;
5052 BlockDirtyInfoList **plist = &list;
5054 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5055 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5056 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5057 info->count = bdrv_get_dirty_count(bs, bm);
5059 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5060 entry->value = info;
5062 plist = &entry->next;
5068 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5071 return hbitmap_get(bitmap->bitmap, sector);
5077 void bdrv_dirty_iter_init(BlockDriverState *bs,
5078 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5080 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5083 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5086 BdrvDirtyBitmap *bitmap;
5087 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5088 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5092 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5094 BdrvDirtyBitmap *bitmap;
5095 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5096 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5100 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5102 return hbitmap_count(bitmap->bitmap);
5105 /* Get a reference to bs */
5106 void bdrv_ref(BlockDriverState *bs)
5111 /* Release a previously grabbed reference to bs.
5112 * If after releasing, reference count is zero, the BlockDriverState is
5114 void bdrv_unref(BlockDriverState *bs)
5116 assert(bs->refcnt > 0);
5117 if (--bs->refcnt == 0) {
5122 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
5124 assert(bs->in_use != in_use);
5125 bs->in_use = in_use;
5128 int bdrv_in_use(BlockDriverState *bs)
5133 void bdrv_iostatus_enable(BlockDriverState *bs)
5135 bs->iostatus_enabled = true;
5136 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5139 /* The I/O status is only enabled if the drive explicitly
5140 * enables it _and_ the VM is configured to stop on errors */
5141 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5143 return (bs->iostatus_enabled &&
5144 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5145 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5146 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5149 void bdrv_iostatus_disable(BlockDriverState *bs)
5151 bs->iostatus_enabled = false;
5154 void bdrv_iostatus_reset(BlockDriverState *bs)
5156 if (bdrv_iostatus_is_enabled(bs)) {
5157 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5159 block_job_iostatus_reset(bs->job);
5164 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5166 assert(bdrv_iostatus_is_enabled(bs));
5167 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5168 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5169 BLOCK_DEVICE_IO_STATUS_FAILED;
5174 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5175 enum BlockAcctType type)
5177 assert(type < BDRV_MAX_IOTYPE);
5179 cookie->bytes = bytes;
5180 cookie->start_time_ns = get_clock();
5181 cookie->type = type;
5185 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5187 assert(cookie->type < BDRV_MAX_IOTYPE);
5189 bs->nr_bytes[cookie->type] += cookie->bytes;
5190 bs->nr_ops[cookie->type]++;
5191 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5194 void bdrv_img_create(const char *filename, const char *fmt,
5195 const char *base_filename, const char *base_fmt,
5196 char *options, uint64_t img_size, int flags,
5197 Error **errp, bool quiet)
5199 QEMUOptionParameter *param = NULL, *create_options = NULL;
5200 QEMUOptionParameter *backing_fmt, *backing_file, *size;
5201 BlockDriver *drv, *proto_drv;
5202 BlockDriver *backing_drv = NULL;
5203 Error *local_err = NULL;
5206 /* Find driver and parse its options */
5207 drv = bdrv_find_format(fmt);
5209 error_setg(errp, "Unknown file format '%s'", fmt);
5213 proto_drv = bdrv_find_protocol(filename, true);
5215 error_setg(errp, "Unknown protocol '%s'", filename);
5219 create_options = append_option_parameters(create_options,
5220 drv->create_options);
5221 create_options = append_option_parameters(create_options,
5222 proto_drv->create_options);
5224 /* Create parameter list with default values */
5225 param = parse_option_parameters("", create_options, param);
5227 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
5229 /* Parse -o options */
5231 param = parse_option_parameters(options, create_options, param);
5232 if (param == NULL) {
5233 error_setg(errp, "Invalid options for file format '%s'.", fmt);
5238 if (base_filename) {
5239 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
5241 error_setg(errp, "Backing file not supported for file format '%s'",
5248 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5249 error_setg(errp, "Backing file format not supported for file "
5250 "format '%s'", fmt);
5255 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
5256 if (backing_file && backing_file->value.s) {
5257 if (!strcmp(filename, backing_file->value.s)) {
5258 error_setg(errp, "Error: Trying to create an image with the "
5259 "same filename as the backing file");
5264 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
5265 if (backing_fmt && backing_fmt->value.s) {
5266 backing_drv = bdrv_find_format(backing_fmt->value.s);
5268 error_setg(errp, "Unknown backing file format '%s'",
5269 backing_fmt->value.s);
5274 // The size for the image must always be specified, with one exception:
5275 // If we are using a backing file, we can obtain the size from there
5276 size = get_option_parameter(param, BLOCK_OPT_SIZE);
5277 if (size && size->value.n == -1) {
5278 if (backing_file && backing_file->value.s) {
5279 BlockDriverState *bs;
5284 /* backing files always opened read-only */
5286 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5290 ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
5291 backing_drv, &local_err);
5293 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5294 backing_file->value.s,
5295 error_get_pretty(local_err));
5296 error_free(local_err);
5301 bdrv_get_geometry(bs, &size);
5304 snprintf(buf, sizeof(buf), "%" PRId64, size);
5305 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
5309 error_setg(errp, "Image creation needs a size parameter");
5315 printf("Formatting '%s', fmt=%s ", filename, fmt);
5316 print_option_parameters(param);
5319 ret = bdrv_create(drv, filename, param, &local_err);
5320 if (ret == -EFBIG) {
5321 /* This is generally a better message than whatever the driver would
5322 * deliver (especially because of the cluster_size_hint), since that
5323 * is most probably not much different from "image too large". */
5324 const char *cluster_size_hint = "";
5325 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
5326 cluster_size_hint = " (try using a larger cluster size)";
5328 error_setg(errp, "The image size is too large for file format '%s'"
5329 "%s", fmt, cluster_size_hint);
5330 error_free(local_err);
5335 free_option_parameters(create_options);
5336 free_option_parameters(param);
5338 if (error_is_set(&local_err)) {
5339 error_propagate(errp, local_err);
5343 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5345 /* Currently BlockDriverState always uses the main loop AioContext */
5346 return qemu_get_aio_context();
5349 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5350 NotifierWithReturn *notifier)
5352 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5355 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
5357 if (bs->drv->bdrv_amend_options == NULL) {
5360 return bs->drv->bdrv_amend_options(bs, options);
5363 /* Used to recurse on single child block filters.
5364 * Single child block filter will store their child in bs->file.
5366 bool bdrv_generic_is_first_non_filter(BlockDriverState *bs,
5367 BlockDriverState *candidate)
5373 if (!bs->drv->authorizations[BS_IS_A_FILTER]) {
5374 if (bs == candidate) {
5381 if (!bs->drv->authorizations[BS_FILTER_PASS_DOWN]) {
5389 return bdrv_recurse_is_first_non_filter(bs->file, candidate);
5392 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5393 BlockDriverState *candidate)
5395 if (bs->drv && bs->drv->bdrv_recurse_is_first_non_filter) {
5396 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5399 return bdrv_generic_is_first_non_filter(bs, candidate);
5402 /* This function checks if the candidate is the first non filter bs down it's
5403 * bs chain. Since we don't have pointers to parents it explore all bs chains
5404 * from the top. Some filters can choose not to pass down the recursion.
5406 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5408 BlockDriverState *bs;
5410 /* walk down the bs forest recursively */
5411 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5418 perm = bdrv_recurse_is_first_non_filter(bs->file, candidate);
5420 /* candidate is the first non filter */