Adam Vodopjan [Fri, 9 Dec 2022 09:26:34 +0000 (09:26 +0000)]
ata: ahci: Fix PCS quirk application for suspend
Since kernel 5.3.4 my laptop (ICH8M controller) does not see Kingston
SV300S37A60G SSD disk connected into a SATA connector on wake from
suspend. The problem was introduced in c312ef176399 ("libata/ahci: Drop
PCS quirk for Denverton and beyond"): the quirk is not applied on wake
from suspend as it originally was.
It is worth to mention the commit contained another bug: the quirk is
not applied at all to controllers which require it. The fix commit 09d6ac8dc51a ("libata/ahci: Fix PCS quirk application") landed in 5.3.8.
So testing my patch anywhere between commits c312ef176399 and 09d6ac8dc51a is pointless.
Not all disks trigger the problem. For example nothing bad happens with
Western Digital WD5000LPCX HDD.
Test hardware:
- Acer 5920G with ICH8M SATA controller
- sda: some SATA HDD connnected into the DVD drive IDE port with a
SATA-IDE caddy. It is a boot disk
- sdb: Kingston SV300S37A60G SSD connected into the only SATA port
sd 0:0:0:0: [sda] Starting disk
sd 2:0:0:0: [sdb] Starting disk
ata4: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1: FORCE: cable set to 80c
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata3.00: disabled
sd 2:0:0:0: rejecting I/O to offline device
ata3.00: detaching (SCSI 2:0:0:0)
sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_NO_CONNECT
driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Synchronizing SCSI cache
sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result:
hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
sd 2:0:0:0: [sdb] Stopping disk
sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK
Commit c312ef176399 dropped ahci_pci_reset_controller() which internally
calls ahci_reset_controller() and applies the PCS quirk if needed after
that. It was called each time a reset was required instead of just
ahci_reset_controller(). This patch puts the function back in place.
Fixes: c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond") Signed-off-by: Adam Vodopjan <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
While the CAP.MQES field in NVMe is a 0s based filed with a natural one
off, we also need to account for the queue wrap condition and fix undo
the one off again in nvme_alloc_io_tag_set. This was never properly
done by the fabrics drivers, but they don't seem to care because there
is no actual physical queue that can wrap around, but it became a
problem when converting over the PCIe driver. Also add back the
BLK_MQ_MAX_DEPTH check that was lost in the same commit.
Yu Kuai [Mon, 26 Dec 2022 03:06:05 +0000 (11:06 +0800)]
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().
Chris Chiu [Mon, 26 Dec 2022 11:43:03 +0000 (19:43 +0800)]
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.
Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].
Artem Egorkine [Sun, 25 Dec 2022 10:57:28 +0000 (12:57 +0200)]
ALSA: line6: fix stack overflow in line6_midi_transmit
Correctly calculate available space including the size of the chunk
buffer. This fixes a buffer overflow when multiple MIDI sysex
messages are sent to a PODxt device.
Artem Egorkine [Sun, 25 Dec 2022 10:57:27 +0000 (12:57 +0200)]
ALSA: line6: correct midi status byte when receiving data from podxt
A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI
messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0
status byte. This is usually corrected by the driver on other OSes.
treewide: Convert del_timer*() to timer_shutdown*()
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
Linus Torvalds [Fri, 23 Dec 2022 22:44:08 +0000 (14:44 -0800)]
Merge tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One driver specific change here which handles the case where a SPI
device for some reason tries to change the bus speed during a message
on fsl_spi hardware, this should be very unusual"
* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl_spi: Don't change speed while chipselect is active
Linus Torvalds [Fri, 23 Dec 2022 22:38:00 +0000 (14:38 -0800)]
Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two core fixes here, one for a long standing race which some Qualcomm
systems have started triggering with their UFS driver and another
fixing a problem with supply lookup introduced by the fixes for devm
related use after free issues that were introduced in this merge
window"
* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix deadlock on regulator enable
regulator: core: Fix resolve supply lookup issue
Linus Torvalds [Fri, 23 Dec 2022 20:00:24 +0000 (12:00 -0800)]
Merge tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening fixes from Kees Cook:
- Fix CFI failure with KASAN (Sami Tolvanen)
- Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)
- Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
Chancellor)
- Ignore "contents" argument in LoadPin's LSM hook handling
- Fix paste-o in /sys/kernel/warn_count API docs
- Use READ_ONCE() consistently for oops/warn limit reading
* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
cfi: Fix CFI failure with KASAN
exit: Use READ_ONCE() for all oops/warn limit reads
security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
lkdtm: cfi: Make PAC test work with GCC 7 and 8
docs: Fix path paste-o for /sys/kernel/warn_count
LoadPin: Ignore the "contents" argument of the LSM hooks
* tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
Linus Torvalds [Fri, 23 Dec 2022 19:44:20 +0000 (11:44 -0800)]
Merge tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
allocator, as it copes with that just as badly as the coherent
allocator, and then add a check to make sure no one passes the flag
ever again"
* tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject GFP_COMP for noncoherent allocations
ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
Linus Torvalds [Fri, 23 Dec 2022 19:39:18 +0000 (11:39 -0800)]
Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- improve p9_check_errors to check buffer size instead of msize when
possible (e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
9p/client: fix data race on req->status
net/9p: fix response size check in p9_check_errors()
net/9p: distinguish zero-copy requests
9p/xen: do not memcpy header into req->rc
9p: set req refcount to zero to avoid uninitialized usage
9p/net: Remove unneeded idr.h #include
9p/fs: Remove unneeded idr.h #include
* tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drm: (39 commits)
drm/amdgpu: grab extra fence reference for drm_sched_job_add_dependency
drm/amdgpu: enable VCN DPG for GC IP v11.0.4
drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0
drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asics
drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34
drm/amdgpu: skip MES for S0ix as well since it's part of GFX
drm/amd/pm: avoid large variable on kernel stack
drm/amdkfd: Fix double release compute pasid
drm/amdkfd: Fix kfd_process_device_init_vm error handling
drm/amd/pm: update SMU13.0.0 reported maximum shader clock
drm/amd/pm: correct SMU13.0.0 pstate profiling clock settings
drm/amd/pm: enable GPO dynamic control support for SMU13.0.7
drm/amd/pm: enable GPO dynamic control support for SMU13.0.0
drm/amdgpu: revert "generally allow over-commit during BO allocation"
drm/amdgpu: Remove unnecessary domain argument
drm/amdgpu: Fix size validation for non-exclusive domains (v4)
drm/amdgpu: Check if fru_addr is not NULL (v2)
drm/i915/ttm: consider CCS for backup objects
drm/i915/migrate: fix corner case in CCS aux copying
drm/amdgpu: rework reserved VMID handling
...
Linus Torvalds [Fri, 23 Dec 2022 18:49:45 +0000 (10:49 -0800)]
Merge tag 'mips_6.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fixes due to DT changes"
* tag 'mips_6.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: dts: bcm63268: Add missing properties to the TWD node
MIPS: ralink: mt7621: avoid to init common ralink reset controller
Linus Torvalds [Fri, 23 Dec 2022 18:45:00 +0000 (10:45 -0800)]
Merge tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Eight fixes, all cc:stable. One is for gcov and the remainder are MM"
* tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
Luca Stefani [Thu, 22 Dec 2022 13:10:49 +0000 (14:10 +0100)]
pstore: Properly assign mem_type property
If mem-type is specified in the device tree
it would end up overriding the record_size
field instead of populating mem_type.
As record_size is currently parsed after the
improper assignment with default size 0 it
continued to work as expected regardless of the
value found in the device tree.
Simply changing the target field of the struct
is enough to get mem-type working as expected.
John Stultz [Wed, 21 Dec 2022 05:18:55 +0000 (05:18 +0000)]
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
In commit 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex
to avoid priority inversion") I changed a lock to an rt_mutex.
However, its possible that CONFIG_RT_MUTEXES is not enabled,
which then results in a build failure, as the 0day bot detected:
https://lore.kernel.org/linux-mm/202212211244[email protected]/
Thus this patch changes CONFIG_PSTORE_PMSG to select
CONFIG_RT_MUTEXES, which ensures the build will not fail.
Sami Tolvanen [Thu, 22 Dec 2022 22:57:47 +0000 (22:57 +0000)]
cfi: Fix CFI failure with KASAN
When CFI_CLANG and KASAN are both enabled, LLVM doesn't generate a
CFI type hash for asan.module_ctor functions in translation units
where CFI is disabled, which leads to a CFI failure during boot when
do_ctors calls the affected constructors:
CFI failure at do_basic_setup+0x64/0x90 (target:
asan.module_ctor+0x0/0x28; expected type: 0xa540670c)
Specifically, this happens because CFI is disabled for
kernel/cfi.c. There's no reason to keep CFI disabled here anymore, so
fix the failure by not filtering out CC_FLAGS_CFI for the file.
Note that https://reviews.llvm.org/rG3b14862f0a96 fixed the issue
where LLVM didn't emit CFI type hashes for any sanitizer constructors,
but now type hashes are emitted correctly for TUs that use CFI.
KVM: x86/mmu: Don't install TDP MMU SPTE if SP has unexpected level
Don't install a leaf TDP MMU SPTE if the parent page's level doesn't
match the target level of the fault, and instead have the vCPU retry the
faulting instruction after warning. Continuing on is completely
unnecessary as the absolute worst case scenario of retrying is DoSing
the vCPU, whereas continuing on all but guarantees bigger explosions, e.g.
KVM: x86/mmu: Re-check under lock that TDP MMU SP hugepage is disallowed
Re-check sp->nx_huge_page_disallowed under the tdp_mmu_pages_lock spinlock
when adding a new shadow page in the TDP MMU. To ensure the NX reclaim
kthread can't see a not-yet-linked shadow page, the page fault path links
the new page table prior to adding the page to possible_nx_huge_pages.
If the page is zapped by different task, e.g. because dirty logging is
disabled, between linking the page and adding it to the list, KVM can end
up triggering use-after-free by adding the zapped SP to the aforementioned
list, as the zapped SP's memory is scheduled for removal via RCU callback.
The bug is detected by the sanity checks guarded by CONFIG_DEBUG_LIST=y,
i.e. the below splat is just one possible signature.
Map the leaf SPTE when handling a TDP MMU page fault if and only if the
target level is reached. A recent commit reworked the retry logic and
incorrectly assumed that walking SPTEs would never "fail", as the loop
either bails (retries) or installs parent SPs. However, the iterator
itself will bail early if it detects a frozen (REMOVED) SPTE when
stepping down. The TDP iterator also rereads the current SPTE before
stepping down specifically to avoid walking into a part of the tree that
is being removed, which means it's possible to terminate the loop without
the guts of the loop observing the frozen SPTE, e.g. if a different task
zaps a parent SPTE between the initial read and try_step_down()'s refresh.
Mapping a leaf SPTE at the wrong level results in all kinds of badness as
page table walkers interpret the SPTE as a page table, not a leaf, and
walk into the weeds.
KVM: x86/mmu: Don't attempt to map leaf if target TDP MMU SPTE is frozen
Hoist the is_removed_spte() check above the "level == goal_level" check
when walking SPTEs during a TDP MMU page fault to avoid attempting to map
a leaf entry if said entry is frozen by a different task/vCPU.
KVM: nVMX: Don't stuff secondary execution control if it's not supported
When stuffing the allowed secondary execution controls for nested VMX in
response to CPUID updates, don't set the allowed-1 bit for a feature that
isn't supported by KVM, i.e. isn't allowed by the canonical vmcs_config.
WARN if KVM attempts to manipulate a feature that isn't supported. All
features that are currently stuffed are always advertised to L1 for
nested VMX if they are supported in KVM's base configuration, and no
additional features should ever be added to the CPUID-induced stuffing
(updating VMX MSRs in response to CPUID updates is a long-standing KVM
flaw that is slowly being fixed).
KVM: nVMX: Properly expose ENABLE_USR_WAIT_PAUSE control to L1
Set ENABLE_USR_WAIT_PAUSE in KVM's supported VMX MSR configuration if the
feature is supported in hardware and enabled in KVM's base, non-nested
configuration, i.e. expose ENABLE_USR_WAIT_PAUSE to L1 if it's supported.
This fixes a bug where saving/restoring, i.e. migrating, a vCPU will fail
if WAITPKG (the associated CPUID feature) is enabled for the vCPU, and
obviously allows L1 to enable the feature for L2.
KVM already effectively exposes ENABLE_USR_WAIT_PAUSE to L1 by stuffing
the allowed-1 control ina vCPU's virtual MSR_IA32_VMX_PROCBASED_CTLS2 when
updating secondary controls in response to KVM_SET_CPUID(2), but (a) that
depends on flawed code (KVM shouldn't touch VMX MSRs in response to CPUID
updates) and (b) runs afoul of vmx_restore_control_msr()'s restriction
that the guest value must be a strict subset of the supported host value.
Although no past commit explicitly enabled nested support for WAITPKG,
doing so is safe and functionally correct from an architectural
perspective as no additional KVM support is needed to virtualize TPAUSE,
UMONITOR, and UMWAIT for L2 relative to L1, and KVM already forwards
VM-Exits to L1 as necessary (commit bf653b78f960, "KVM: vmx: Introduce
handle_unexpected_vmexit and handle WAITPKG vmexit").
Note, KVM always keeps the hosts MSR_IA32_UMWAIT_CONTROL resident in
hardware, i.e. always runs both L1 and L2 with the host's power management
settings for TPAUSE and UMWAIT. See commit bf09fb6cba4f ("KVM: VMX: Stop
context switching MSR_IA32_UMWAIT_CONTROL") for more details.
KVM: nVMX: Document that ignoring memory failures for VMCLEAR is deliberate
Explicitly drop the result of kvm_vcpu_write_guest() when writing the
"launch state" as part of VMCLEAR emulation, and add a comment to call
out that KVM's behavior is architecturally valid. Intel's pseudocode
effectively says that VMCLEAR is a nop if the target VMCS address isn't
in memory, e.g. if the address points at MMIO.
Add a FIXME to call out that suppressing failures on __copy_to_user() is
wrong, as memory (a memslot) does exist in that case. Punt the issue to
the future as open coding kvm_vcpu_write_guest() just to make sure the
guest dies with -EFAULT isn't worth the extra complexity. The flaw will
need to be addressed if KVM ever does something intelligent on uaccess
failures, e.g. to support post-copy demand paging, but in that case KVM
will need a more thorough overhaul, i.e. VMCLEAR shouldn't need to open
code a core KVM helper.
KVM: selftests: Zero out valid_bank_mask for "all" case in Hyper-V IPI test
Zero out the valid_bank_mask when using the fast variant of
HVCALL_SEND_IPI_EX to send IPIs to all vCPUs. KVM requires the "var_cnt"
and "valid_bank_mask" inputs to be consistent even when targeting all
vCPUs. See commit bd1ba5732bb9 ("KVM: x86: Get the number of Hyper-V
sparse banks from the VARHEAD field").
KVM: x86: Sanity check inputs to kvm_handle_memory_failure()
Add a sanity check in kvm_handle_memory_failure() to assert that a valid
x86_exception structure is provided if the memory "failure" wants to
propagate a fault into the guest. If a memory failure happens during a
direct guest physical memory access, e.g. for nested VMX, KVM hardcodes
the failure to X86EMUL_IO_NEEDED and doesn't provide an exception pointer
(because the exception struct would just be filled with garbage).
In kvm_hv_flush_tlb(), 'data_offset' and 'consumed_xmm_halves' variables
are used in a mutually exclusive way: in 'hc->fast' we count in 'XMM
halves' and increase 'data_offset' otherwise. Coverity discovered, that in
one case both variables are incremented unconditionally. This doesn't seem
to cause any issues as the only user of 'data_offset'/'consumed_xmm_halves'
data is kvm_hv_get_tlb_flush_entries() -> kvm_hv_get_hc_data() which also
takes into account 'hc->fast' but is still worth fixing.
To make things explicit, put 'data_offset' and 'consumed_xmm_halves' to
'struct kvm_hv_hcall' as a union and use at call sites. This allows to
remove explicit 'data_offset'/'consumed_xmm_halves' parameters from
kvm_hv_get_hc_data()/kvm_get_sparse_vp_set()/kvm_hv_get_tlb_flush_entries()
helpers.
Note: 'struct kvm_hv_hcall' is allocated on stack in kvm_hv_hypercall() and
is not zeroed, consumers are supposed to initialize the appropriate field
if needed.
When scanning userspace I/OAPIC entries, intercept EOI for level-triggered
IRQs if the current vCPU has a pending and/or in-service IRQ for the
vector in its local API, even if the vCPU doesn't match the new entry's
destination. This fixes a race between userspace I/OAPIC reconfiguration
and IRQ delivery that results in the vector's bit being left set in the
remote IRR due to the eventual EOI not being forwarded to the userspace
I/OAPIC.
Commit 0fc5a36dd6b3 ("KVM: x86: ioapic: Fix level-triggered EOI and IOAPIC
reconfigure race") fixed the in-kernel IOAPIC, but not the userspace
IOAPIC configuration, which has a similar race.
Like Xu [Wed, 7 Dec 2022 07:15:05 +0000 (15:15 +0800)]
KVM: x86/pmu: Prevent zero period event from being repeatedly released
The current vPMU can reuse the same pmc->perf_event for the same
hardware event via pmc_pause/resume_counter(), but this optimization
does not apply to a portion of the TSX events (e.g., "event=0x3c,in_tx=1,
in_tx_cp=1"), where event->attr.sample_period is legally zero at creation,
thus making the perf call to perf_event_period() meaningless (no need to
adjust sample period in this case), and instead causing such reusable
perf_events to be repeatedly released and created.
Avoid releasing zero sample_period events by checking is_sampling_event()
to follow the previously enable/disable optimization.
Jens Axboe [Fri, 23 Dec 2022 13:37:08 +0000 (06:37 -0700)]
io_uring: check for valid register opcode earlier
We only check the register opcode value inside the restricted ring
section, move it into the main io_uring_register() function instead
and check it up front.
Linus Torvalds [Thu, 22 Dec 2022 19:22:31 +0000 (11:22 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and small updates.
The only things of note is a qla2xxx fix for crash on hotplug and
timeout and the addition of a user exposed abstraction layer for
persistent reservation error return handling (which necessitates the
conversion of nvme.c as well as SCSI)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix crash when I/O abort times out
nvme: Convert NVMe errors to PR errors
scsi: sd: Convert SCSI errors to PR errors
scsi: core: Rename status_byte to sg_status_byte
block: Add error codes for common PR failures
scsi: sd: sd_zbc: Trace zone append emulation
scsi: libfc: Include the correct header
Linus Torvalds [Thu, 22 Dec 2022 19:17:34 +0000 (11:17 -0800)]
Merge tag 'afs-next-20221222' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs update from David Howells:
"A fix for a couple of missing resource counter decrements, two small
cleanups of now-unused bits of code and a patch to remove writepage
support from afs"
* tag 'afs-next-20221222' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
Linus Torvalds [Thu, 22 Dec 2022 19:07:29 +0000 (11:07 -0800)]
Merge tag 'perf-tools-for-v6.2-2-2022-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"perf tools fixes and improvements:
- Don't stop building perf if python setuptools isn't installed, just
disable the affected perf feature.
- Remove explicit reference to python 2.x devel files, that warning
is about python-devel, no matter what version, being unavailable
and thus disabling the linking with libpython.
- Don't use -Werror=switch-enum when building the python support that
handles libtraceevent enumerations, as there is no good way to test
if some specific enum entry is available with the libtraceevent
installed on the system.
- Introduce 'perf lock contention' --type-filter and --lock-filter,
to filter by lock type and lock name:
$ sudo ./perf lock record -a -- ./perf bench sched messaging
$ sudo ./perf lock contention -E 5 -Y spinlock
contended total wait max wait avg wait type caller
802 1.26 ms 11.73 us 1.58 us spinlock __wake_up_common_lock+0x62
13 787.16 us 105.44 us 60.55 us spinlock remove_wait_queue+0x14
12 612.96 us 78.70 us 51.08 us spinlock prepare_to_wait+0x27
114 340.68 us 12.61 us 2.99 us spinlock try_to_wake_up+0x1f5
83 226.38 us 9.15 us 2.73 us spinlock folio_lruvec_lock_irqsave+0x5e
$ sudo ./perf lock contention -l
contended total wait max wait avg wait address symbol
$ sudo ./perf lock contention -L jiffies_lock,rcu_state
contended total wait max wait avg wait type caller
15 280.88 us 23.51 us 18.73 us spinlock tick_sched_do_timer+0x93
1 20.49 us 20.49 us 20.49 us spinlock __softirqentry_text_start+0xeb
$ sudo ./perf lock contention -L ffff9f4140059000
contended total wait max wait avg wait type caller
38 779.40 us 42.83 us 20.51 us spinlock worker_thread+0x50
11 216.30 us 39.87 us 19.66 us spinlock queue_work_on+0x39
8 118.13 us 20.51 us 14.77 us spinlock kthread+0xe5
- Fix splitting CC into compiler and options when checking if a
option is present in clang to build the python binding, needed in
systems such as yocto that set CC to, e.g.: "gcc --sysroot=/a/b/c".
- Add vendor events files (JSON) for AMD Zen 4, from sections
2.1.15.4 "Core Performance Monitor Counters", 2.1.15.5 "L3 Cache
Performance Monitor Counter"s and Section 7.1 "Fabric Performance
Monitor Counter (PMC) Events" in the Processor Programming
Reference (PPR) for AMD Family 19h Model 11h Revision B1
processors.
This constitutes events which capture op dispatch, execution and
retirement, branch prediction, L1 and L2 cache activity, TLB
activity, L3 cache activity and data bandwidth for various links
and interfaces in the Data Fabric.
- Also, from the same PPR are metrics taken from Section 2.1.15.2
"Performance Measurement", including pipeline utilization, which
are new to Zen 4 processors and useful for finding performance
bottlenecks by analyzing activity at different stages of the
pipeline.
- Greatly improve the 'srcline', 'srcline_from', 'srcline_to' and
'srcfile' sort keys performance by postponing calling the external
addr2line utility to the collapse phase of histogram bucketing.
- Fix 'perf test' "all PMU test" to skip parametrized events, that
requires setting up and are not supported by this test.
- Update tools/ copies of kernel headers: features,
disabled-features, fscrypt.h, i915_drm.h, msr-index.h, power pc
syscall table and kvm.h.
- Add .DELETE_ON_ERROR special Makefile target to clean up partially
updated files on error.
- Simplify the mksyscalltbl script for arm64 by avoiding to run the
host compiler to create the syscall table, do it all just with the
shell script.
- Further fixes to honour quiet mode (-q)"
* tag 'perf-tools-for-v6.2-2-2022-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
perf python: Fix splitting CC into compiler and options
perf scripting python: Don't be strict at handling libtraceevent enumerations
perf arm64: Simplify mksyscalltbl
perf build: Remove explicit reference to python 2.x devel files
perf vendor events amd: Add Zen 4 mapping
perf vendor events amd: Add Zen 4 metrics
perf vendor events amd: Add Zen 4 uncore events
perf vendor events amd: Add Zen 4 core events
perf vendor events intel: Refresh westmereex events
perf vendor events intel: Refresh westmereep-sp events
perf vendor events intel: Refresh westmereep-dp events
perf vendor events intel: Refresh tigerlake metrics and events
perf vendor events intel: Refresh snowridgex events
perf vendor events intel: Refresh skylakex metrics and events
perf vendor events intel: Refresh skylake metrics and events
perf vendor events intel: Refresh silvermont events
perf vendor events intel: Refresh sapphirerapids metrics and events
perf vendor events intel: Refresh sandybridge metrics and events
perf vendor events intel: Refresh nehalemex events
perf vendor events intel: Refresh nehalemep events
...
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
After we introduced a module parameter and quirk infrastructure for
picking the Microsoft GUID over the SOC vendor GUID we discovered
that lots and lots of systems are getting this wrong.
The table continues to grow, and is becoming unwieldy.
We don't really have any benefit to forcing vendors to populate the
AMD GUID. This is just extra work, and more and more vendors seem
to mess it up. As the Microsoft GUID is used by Windows as well,
it's very likely that it won't be messed up like this.
So drop all the quirks forcing it and the Rembrandt behavior. This
means that Cezanne or later effectively only run the Microsoft GUID
codepath with the exception of HP Elitebook 8*5 G9.
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
HP Elitebook 865 supports both the AMD GUID w/ _REV 2 and Microsoft
GUID with _REV 0. Both have very similar code but the AMD GUID
has a special workaround that is specific to a problem with
spurious wakeups on systems with Qualcomm WLAN.
This is believed to be a bug in the Qualcomm WLAN F/W (it doesn't
affect any other WLAN H/W). If this WLAN firmware is fixed this
quirk can be dropped.
Hans de Goede [Thu, 15 Dec 2022 09:41:38 +0000 (10:41 +0100)]
ACPI: video: Fix Apple GMUX backlight detection
The apple-gmux driver only binds to old GMUX devices which have an
IORESOURCE_IO resource (using inb()/outb()) rather then memory-mapped
IO (IORESOURCE_MEM).
T2 MacBooks use the new style GMUX devices (with IORESOURCE_MEM access),
so these are not supported by the apple-gmux driver. This is not a problem
since they have working ACPI video backlight support.
But the apple_gmux_present() helper only checks if an ACPI device with
the "APP000B" HID is present, causing acpi_video_get_backlight_type()
to return acpi_backlight_apple_gmux disabling the acpi_video backlight
device.
Add a new apple_gmux_backlight_present() helper which checks that
the "APP000B" device actually is an old GMUX device with an IORESOURCE_IO
resource.
This fixes the acpi_video0 backlight no longer registering on T2 MacBooks.
Note people are working to add support for the new style GMUX to Linux:
https://github.com/kekrby/linux-t2/commits/wip/hybrid-graphics
Once this lands this patch should be reverted so that
acpi_video_get_backlight_type() also prefers the gmux on new style GMUX
MacBooks, but for now this is necessary to avoid regressing backlight
control on T2 Macs.
Fixes: 21245df307cb ("ACPI: video: Add Apple GMUX brightness control detection") Reported-and-tested-by: Aditya Garg <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
Hans de Goede [Thu, 15 Dec 2022 09:44:43 +0000 (10:44 +0100)]
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
The Asus ExpertBook B2502 has the same keyboard issue as Asus Vivobook
K3402ZA/K3502ZA. The kernel overrides IRQ 1 to Edge_High when it
should be Active_Low.
This patch adds the ExpertBook B2502 model to the existing
quirk list of Asus laptops with this issue.
Adrian Freund [Tue, 13 Dec 2022 20:13:11 +0000 (21:13 +0100)]
ACPI: resource: do IRQ override on Lenovo 14ALC7
Commit bfcdf58380b1 ("ACPI: resource: do IRQ override on LENOVO IdeaPad")
added an override for Lenovo IdeaPad 5 16ALC7. The 14ALC7 variant also
suffers from a broken touchscreen and trackpad.
Erik Schumacher [Sun, 11 Dec 2022 13:33:22 +0000 (14:33 +0100)]
ACPI: resource: do IRQ override on XMG Core 15
The Schenker XMG CORE 15 (M22) is Ryzen-6 based and needs IRQ overriding
for the keyboard to work. Adding an entry for this laptop to the
override_table makes the internal keyboard functional again.
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
The ACPI video detection code has a module parameter
`register_backlight_delay` which is currently configured to 8 seconds.
This means that if after 8 seconds of booting no native driver has created
a backlight device then the code will attempt to make an ACPI video
backlight device.
This was intended as a safety mechanism with the backlight overhaul that
occurred in kernel 6.1, but as it doesn't appear necesssary set it to be
disabled by default.
drm/amd/display: Report to ACPI video if no panels were found
On desktop APUs amdgpu doesn't create a native backlight device
as no eDP panels are found. However if the BIOS has reported
backlight control methods in the ACPI tables then an acpi_video0
backlight device will be made 8 seconds after boot.
This has manifested in a power slider on a number of desktop APUs
ranging from Ryzen 5000 through Ryzen 7000 on various motherboard
manufacturers. To avoid this, report to the acpi video detection
that the system does not have any panel connected in the native
driver.
ACPI: video: Allow GPU drivers to report no panels
The current logic for the ACPI backlight detection will create
a backlight device if no native or vendor drivers have created
8 seconds after the system has booted if the ACPI tables
included backlight control methods.
If the GPU drivers have loaded, they may be able to report whether
any LCD panels were found. Allow using this information to factor
in whether to enable the fallback logic for making an acpi_video0
backlight device.
Jeff Layton [Thu, 22 Dec 2022 14:51:30 +0000 (09:51 -0500)]
nfsd: shut down the NFSv4 state objects before the filecache
Currently, we shut down the filecache before trying to clean up the
stateids that depend on it. This leads to the kernel trying to free an
nfsd_file twice, and a refcount overput on the nf_mark.
Change the shutdown procedure to tear down all of the stateids prior
to shutting down the filecache.
Reported-and-tested-by: Wang Yugui <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Fixes: 5e113224c17e ("nfsd: nfsd_file cache entries should be per net namespace") Signed-off-by: Chuck Lever <[email protected]>
perf python: Fix splitting CC into compiler and options
Noticed this build failure on archlinux:base when building with clang:
clang-14: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
In tools/perf/util/setup.py we check if clang supports that option, but
since commit 3cad53a6f9cdbafa ("perf python: Account for multiple words
in CC") this got broken as in the common case where CC="clang":
And then the Popen will call clang with that bogus option name that in
turn will not produce the b"unknown argument" or b"is not supported"
that this function uses to detect if the option is not available and
thus later on clang will be called with an unknown/unsupported option.
Fix it by looking if really there are options in the provided CC
variable, and if so override 'cc' with the first token and append the
options to the 'option' variable.
David Howells [Fri, 18 Nov 2022 07:57:27 +0000 (07:57 +0000)]
afs: Stop implementing ->writepage()
We're trying to get rid of the ->writepage() hook[1]. Stop afs from using
it by unlocking the page and calling afs_writepages_region() rather than
folio_write_one().
A flag is passed to afs_writepages_region() to indicate that it should only
write a single region so that we don't flush the entire file in
->write_begin(), but do add other dirty data to the region being written to
try and reduce the number of RPC ops.
This requires ->migrate_folio() to be implemented, so point that at
filemap_migrate_folio() for files and also for symlinks and directories.
This can be tested by turning on the afs_folio_dirty tracepoint and then
doing something like:
Colin Ian King [Thu, 20 Oct 2022 17:39:23 +0000 (18:39 +0100)]
afs: remove variable nr_servers
Variable nr_servers is no longer being used, the last reference
to it was removed in commit 45df8462730d ("afs: Fix server list handling")
so clean up the code by removing it.
David Howells [Wed, 21 Dec 2022 14:30:48 +0000 (14:30 +0000)]
afs: Fix lost servers_outstanding count
The afs_fs_probe_dispatcher() work function is passed a count on
net->servers_outstanding when it is scheduled (which may come via its
timer). This is passed back to the work_item, passed to the timer or
dropped at the end of the dispatcher function.
But, at the top of the dispatcher function, there are two checks which
skip the rest of the function: if the network namespace is being destroyed
or if there are no fileservers to probe. These two return paths, however,
do not drop the count passed to the dispatcher, and so, sometimes, the
destruction of a network namespace, such as induced by rmmod of the kafs
module, may get stuck in afs_purge_servers(), waiting for
net->servers_outstanding to become zero.
Fix this by adding the missing decrements in afs_fs_probe_dispatcher().
Yanjun Zhang [Thu, 22 Dec 2022 01:57:21 +0000 (09:57 +0800)]
nvme: fix multipath crash caused by flush request when blktrace is enabled
The flush request initialized by blk_kick_flush has NULL bio,
and it may be dealt with nvme_end_req during io completion.
When blktrace is enabled, nvme_trace_bio_complete with multipath
activated trying to access NULL pointer bio from flush request
results in the following crash:
Takashi Iwai [Thu, 22 Dec 2022 08:18:38 +0000 (09:18 +0100)]
Merge tag 'asoc-v6.2-3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.2
Some more small fixes and board quirks that came in since my last
update, the main one being the fixes from Kai for issues around the
attempts to get kexec working well on SOF based systems.
Jaroslav Kysela [Thu, 15 Dec 2022 15:30:37 +0000 (16:30 +0100)]
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
It seems that the firmware is broken and does not accept
the UAC_EP_CS_ATTR_SAMPLE_RATE URB. There is only one rate (48000Hz)
available in the descriptors for the output endpoint.
Create a new quirk QUIRK_FLAG_FIXED_RATE to skip the rate setup
when only one rate is available (fixed).
Linus Torvalds [Thu, 22 Dec 2022 02:57:24 +0000 (18:57 -0800)]
Merge tag 'trace-probes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace probes updates from Steven Rostedt:
- New "symstr" type for dynamic events that writes the name of the
function+offset into the ring buffer and not just the address
- Prevent kernel symbol processing on addresses in user space probes
(uprobes).
- And minor fixes and clean ups
* tag 'trace-probes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Reject symbol/symstr type for uprobe
tracing/probes: Add symstr type for dynamic events
kprobes: kretprobe events missing on 2-core KVM guest
kprobes: Fix check for probe enabled in kill_kprobe()
test_kprobes: Fix implicit declaration error of test_kprobes
tracing: Fix race where eprobes can be called before the event
Linus Torvalds [Thu, 22 Dec 2022 02:52:15 +0000 (18:52 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull RISC-V kvm updates from Paolo Bonzini:
- Allow unloading KVM module
- Allow KVM user-space to set mvendorid, marchid, and mimpid
- Several fixes and cleanups
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid
RISC-V: KVM: Save mvendorid, marchid, and mimpid when creating VCPU
RISC-V: Export sbi_get_mvendorid() and friends
RISC-V: KVM: Move sbi related struct and functions to kvm_vcpu_sbi.h
RISC-V: KVM: Use switch-case in kvm_riscv_vcpu_set/get_reg()
RISC-V: KVM: Remove redundant includes of asm/csr.h
RISC-V: KVM: Remove redundant includes of asm/kvm_vcpu_timer.h
RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config()
RISC-V: KVM: Simplify kvm_arch_prepare_memory_region()
RISC-V: KVM: Exit run-loop immediately if xfer_to_guest fails
RISC-V: KVM: use vma_lookup() instead of find_vma_intersection()
RISC-V: KVM: Add exit logic to main.c
* tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux:
block: don't clear REQ_ALLOC_CACHE for non-polled requests
block: fix use-after-free of q->q_usage_counter
block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED
blk-iolatency: Fix memory leak on add_disk() failures
loop: Fix the max_loop commandline argument treatment when it is set to 0
block/blk-iocost (gcc13): keep large values in a new enum
block, bfq: replace 0/1 with false/true in bic apis
block, bfq: don't return bfqg from __bfq_bic_change_cgroup()
block, bfq: fix possible uaf for 'bfqq->bic'
Linus Torvalds [Thu, 22 Dec 2022 00:28:25 +0000 (16:28 -0800)]
Merge tag 'io_uring-6.2-2022-12-19' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Improve the locking for timeouts. This was originally queued up for
the initial pull, but I messed up and it got missed. (Pavel)
- Fix an issue with running task_work from the wait path, causing some
inefficiencies (me)
- Add a clear of ->free_iov upfront in the 32-bit compat data
importing, so we ensure that it's always sane at completion time (me)
- Use call_rcu_hurry() for the eventfd signaling (Dylan)
- Ordering fix for multishot recv completions (Pavel)
- Add the io_uring trace header to the MAINTAINERS entry (Ammar)
* tag 'io_uring-6.2-2022-12-19' of git://git.kernel.dk/linux:
MAINTAINERS: io_uring: Add include/trace/events/io_uring.h
io_uring/net: fix cleanup after recycle
io_uring/net: ensure compat import handlers clear free_iov
io_uring: include task_work run after scheduling in wait for events
io_uring: don't use TIF_NOTIFY_SIGNAL to test for availability of task_work
io_uring: use call_rcu_hurry if signaling an eventfd
io_uring: fix overflow handling regression
io_uring: ease timeout flush locking requirements
io_uring: revise completion_lock locking
io_uring: protect cq_timeouts with timeout_lock
Liam Howlett [Mon, 19 Dec 2022 16:20:15 +0000 (16:20 +0000)]
maple_tree: fix mas_spanning_rebalance() on insufficient data
Mike Rapoport contacted me off-list with a regression in running criu.
Periodic tests fail with an RCU stall during execution. Although rare, it
is possible to hit this with other uses so this patch should be backported
to fix the regression.
This patchset adds the fix and a test case to the maple tree test
suite.
This patch (of 2):
An insufficient node was causing an out-of-bounds access on the node in
mas_leaf_max_gap(). The cause was the faulty detection of the new node
being a root node when overwriting many entries at the end of the tree.
Fix the detection of a new root and ensure there is sufficient data prior
to entering the spanning rebalance loop.
Mike Kravetz [Mon, 12 Dec 2022 23:50:41 +0000 (15:50 -0800)]
hugetlb: really allocate vma lock for all sharable vmas
Commit bbff39cc6cbc ("hugetlb: allocate vma lock for all sharable vmas")
removed the pmd sharable checks in the vma lock helper routines. However,
it left the functional version of helper routines behind #ifdef
CONFIG_ARCH_WANT_HUGE_PMD_SHARE. Therefore, the vma lock is not being
used for sharable vmas on architectures that do not support pmd sharing.
On these architectures, a potential fault/truncation race is exposed that
could leave pages in a hugetlb file past i_size until the file is removed.
Move the functional vma lock helpers outside the ifdef, and remove the
non-functional stubs. Since the vma lock is not just for pmd sharing,
rename the routine __vma_shareable_flags_pmd.
Arnd Bergmann [Thu, 15 Dec 2022 16:30:17 +0000 (17:30 +0100)]
kmsan: include linux/vmalloc.h
This is needed for the vmap/vunmap declarations:
mm/kmsan/kmsan_test.c:316:9: error: implicit declaration of function 'vmap' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
vbuf = vmap(pages, npages, VM_MAP, PAGE_KERNEL);
^
mm/kmsan/kmsan_test.c:316:29: error: use of undeclared identifier 'VM_MAP'
vbuf = vmap(pages, npages, VM_MAP, PAGE_KERNEL);
^
mm/kmsan/kmsan_test.c:322:3: error: implicit declaration of function 'vunmap' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
vunmap(vbuf);
^
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
When encountering any vma in the range with policy other than MPOL_BIND or
MPOL_PREFERRED_MANY, an error is returned without issuing a mpol_put on
the policy just allocated with mpol_dup().
This allows arbitrary users to leak kernel memory.
Vlastimil Babka [Fri, 16 Dec 2022 16:32:27 +0000 (17:32 +0100)]
mm, mremap: fix mremap() expanding vma with addr inside vma
Since 6.1 we have noticed random rpm install failures that were tracked to
mremap() returning -ENOMEM and to commit ca3d76b0aa80 ("mm: add merging
after mremap resize").
The problem occurs when mremap() expands a VMA in place, but using an
starting address that's not vma->vm_start, but somewhere in the middle.
The extension_pgoff calculation introduced by the commit is wrong in that
case, so vma_merge() fails due to pgoffs not being compatible. Fix the
calculation.
By the way it seems that the situations, where rpm now expands a vma from
the middle, were made possible also due to that commit, thanks to the
improved vma merging. Yet it should work just fine, except for the buggy
calculation.
Jens Axboe [Wed, 21 Dec 2022 14:11:33 +0000 (07:11 -0700)]
io_uring/cancel: re-grab ctx mutex after finishing wait
If we have a signal pending during cancelations, it'll cause the
task_work run to return an error. Since we didn't run task_work, the
current task is left in TASK_INTERRUPTIBLE state when we need to
re-grab the ctx mutex, and the kernel will rightfully complain about
that.
Move the lock grabbing for the error cases outside the loop to avoid
that issue.
perf scripting python: Don't be strict at handling libtraceevent enumerations
The build was failing on archlinux because it has a newer libtraceevent
that added a new entry to the tep_print_arg_type enum:
19.72 archlinux:base : FAIL gcc version 12.2.0 (GCC)
util/scripting-engines/trace-event-python.c: In function ‘define_event_symbols’:
util/scripting-engines/trace-event-python.c:281:9: error: enumeration value ‘TEP_PRINT_CPUMASK’ not handled in switch [-Werror=switch-enum]
281 | switch (args->type) {
| ^~~~~~
cc1: all warnings being treated as errors
Since we build with distros that have different versions of
libtraceevent and there is no way to easily test if these enum entries
are available, just disable -Werror=switch-enum for that specific
object.
This patch isn't intended to have any effect on the compiled code. It
just removes one level of indirection: calling the *host* compiler to
build and then run a program that just printf:s the numerical entries of
the syscall-table. In other words, the generated syscalls.c changes
from:
[46] = "ftruncate",
to:
[__NR3264_ftruncate] = "ftruncate",
The latter is as good as the former to the user of perf, and this can be
done directly by the shell-script. The syscalls defined as non-literal
values (like "#define __NR_ftruncate __NR3264_ftruncate") are trivially
resolved at compile-time without namespace-leaking and/or collision for
its sole user, perf/util/syscalltbl.c, that just #includes the generated
file. A future "-mabi=32" support would probably have to handle this
differently, but that is a pre-existing problem not affected by this
simplification.
Calling the *host* compiler only complicates things and accidentally can
get a completely wrong set of files and syscall numbers, see earlier
commits. Note that the script parameter hostcc is now unused.
At the time of this patch, powerpc (the origin, see comments), and also
e.g. x86 has moved on, from filtering "gcc -dM -E" output to reading
separate specific text-file, a table of syscall numbers. IMHO should
arm64 consider adopting this.
Linus Torvalds [Wed, 21 Dec 2022 18:40:08 +0000 (10:40 -0800)]
Merge tag '6.2-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"cifs/smb3 client fixes, mostly related to reconnect and/or DFS:
- two important reconnect fixes: cases where status of recently
connected IPCs and shares were not being updated leaving them in an
incorrect state
- fix for older Windows servers that would return
STATUS_OBJECT_NAME_INVALID to query info requests on DFS links in a
namespace that contained non-ASCII characters, reducing number of
wasted roundtrips.
- fix for leaked -ENOMEM to userspace when cifs.ko couldn't perform
I/O due to a disconnected server, expired or deleted session.
- removal of all unneeded DFS related mount option string parsing
(now using fs_context for automounts)
- improve clarity/readability, moving various DFS related functions
out of fs/cifs/connect.c (which was getting too big to be readable)
to new file.
- Fix problem when large number of DFS connections. Allow sharing of
DFS connections and fix how the referral paths are matched
- Referral caching fix: Instead of looking up ipc connections to
refresh cached referrals, store direct dfs root server's IPC
pointer in new sessions so it can simply be accessed to either
refresh or create a new referral that such connections belong to.
- Fix to allow dfs root server's connections to also failover
- Optimized reconnect of nested DFS links
- Set correct status of IPC connections marked for reconnect"
* tag '6.2-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: don't leak -ENOMEM in smb2_open_file()
cifs: use origin fullpath for automounts
cifs: set correct status of tcon ipc when reconnecting
cifs: optimize reconnect of nested links
cifs: fix source pathname comparison of dfs supers
cifs: fix confusing debug message
cifs: don't block in dfs_cache_noreq_update_tgthint()
cifs: refresh root referrals
cifs: fix refresh of cached referrals
cifs: don't refresh cached referrals from unactive mounts
cifs: share dfs connections and supers
cifs: split out ses and tcon retrieval from mount_get_conns()
cifs: set resolved ip in sockaddr
cifs: remove unused smb3_fs_context::mount_options
cifs: get rid of mount options string parsing
cifs: use fs_context for automounts
cifs: reduce roundtrips on create/qinfo requests
cifs: set correct ipc status after initial tree connect
cifs: set correct tcon status after initial tree connect
Linus Torvalds [Wed, 21 Dec 2022 18:18:17 +0000 (10:18 -0800)]
Merge tag 'ntfs3_for_6.2' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- added mount options 'hidedotfiles', 'nocase' and 'windows_names'
- fixed xfstests (tested on x86_64): generic/083 generic/263
generic/307 generic/465
- fix some logic errors
- code refactoring and dead code removal
* tag 'ntfs3_for_6.2' of https://github.com/Paragon-Software-Group/linux-ntfs3: (61 commits)
fs/ntfs3: Make if more readable
fs/ntfs3: Improve checking of bad clusters
fs/ntfs3: Fix wrong if in hdr_first_de
fs/ntfs3: Use ALIGN kernel macro
fs/ntfs3: Fix incorrect if in ntfs_set_acl_ex
fs/ntfs3: Check fields while reading
fs/ntfs3: Correct ntfs_check_for_free_space
fs/ntfs3: Restore correct state after ENOSPC in attr_data_get_block
fs/ntfs3: Changing locking in ntfs_rename
fs/ntfs3: Fixing wrong logic in attr_set_size and ntfs_fallocate
fs/ntfs3: atomic_open implementation
fs/ntfs3: Fix wrong indentations
fs/ntfs3: Change new sparse cluster processing
fs/ntfs3: Fixing work with sparse clusters
fs/ntfs3: Simplify ntfs_update_mftmirr function
fs/ntfs3: Remove unused functions
fs/ntfs3: Fix sparse problems
fs/ntfs3: Add ntfs_bitmap_weight_le function and refactoring
fs/ntfs3: Use _le variants of bitops functions
fs/ntfs3: Add functions to modify LE bitmaps
...
Linus Torvalds [Wed, 21 Dec 2022 17:54:00 +0000 (09:54 -0800)]
Merge tag 'fs.mount.propagation.fix.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull mount propagation fix from Christian Brauner:
"The propagate_mnt() function handles mount propagation when creating
mounts and propagates the source mount tree @source_mnt to all
applicable nodes of the destination propagation mount tree headed by
@dest_mnt.
Unfortunately it contains a bug where it fails to terminate at peers
of @source_mnt when looking up copies of the source mount that become
masters for copies of the source mount tree mounted on top of slaves
in the destination propagation tree causing a NULL dereference.
This fixes that bug (with a long commit message for a seven character
fix but hopefully it'll help us fix issues faster in the future rather
than having to go through the pain of having to relearn everything
once more)"
* tag 'fs.mount.propagation.fix.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
pnode: terminate at peers of source
perf build: Remove explicit reference to python 2.x devel files
If the libpython feature test (tools/build/feature/test-libpython.c)
fails, then the python-devel is missing, it doesn't mattere if it is for
python2 or 3, remove that explicit 2.x reference.
Sandipan Das [Wed, 14 Dec 2022 08:26:52 +0000 (13:56 +0530)]
perf vendor events amd: Add Zen 4 mapping
Add a regular expression in the map file so that appropriate JSON event
files are used for AMD Zen 4 processors. Restrict the regular expression
for AMD Zen 3 processors to known model ranges since they also belong to
Family 19h.
Sandipan Das [Wed, 14 Dec 2022 08:26:51 +0000 (13:56 +0530)]
perf vendor events amd: Add Zen 4 metrics
Add metrics taken from Section 2.1.15.2 "Performance Measurement" in
the Processor Programming Reference (PPR) for AMD Family 19h Model 11h
Revision B1 processors.
The recommended metrics are sourced from Table 27 "Guidance for Common
Performance Statistics with Complex Event Selects".
The pipeline utilization metrics are sourced from Table 28 "Guidance
for Pipeline Utilization Analysis Statistics". These are new to Zen 4
processors and useful for finding performance bottlenecks by analyzing
activity at different stages of the pipeline. Metric groups have been
added for Level 1 and Level 2 analysis.
Sandipan Das [Wed, 14 Dec 2022 08:26:50 +0000 (13:56 +0530)]
perf vendor events amd: Add Zen 4 uncore events
Add uncore events taken from Section 2.1.15.5 "L3 Cache Performance
Monitor Counter"s and Section 7.1 "Fabric Performance Monitor Counter
(PMC) Events" in the Processor Programming Reference (PPR) for AMD
Family 19h Model 11h Revision B1 processors. This constitutes events
which capture L3 cache activity and data bandwidth for various links
and interfaces in the Data Fabric.
Sandipan Das [Wed, 14 Dec 2022 08:26:49 +0000 (13:56 +0530)]
perf vendor events amd: Add Zen 4 core events
Add core events taken from Section 2.1.15.4 "Core Performance Monitor
Counters" in the Processor Programming Reference (PPR) for AMD Family
19h Model 11h Revision B1 processors. This constitutes events which
capture op dispatch, execution and retirement, branch prediction, L1
and L2 cache activity, TLB activity, etc.
Update the westmereep-dp events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged, unused json values are removed and the
version number bumped to v3 to match the perfmon mapfile.csv. This
increases consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:55:07 +0000 (22:55 -0800)]
perf vendor events intel: Refresh tigerlake metrics and events
Update the tigerlake metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are updated to version 1.08 and unused json values are
removed. The formatting changes increase consistency across the json
files.
Ian Rogers [Thu, 15 Dec 2022 06:55:05 +0000 (22:55 -0800)]
perf vendor events intel: Refresh skylakex metrics and events
Update the skylakex metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
order of metrics varies as TMA metrics are first converted and then
removed if perfmon versions are found. The events are updated with
fixes to uncore events and improved descriptions. uncore-other.json
changes due to events now being sorted. The formatting changes
increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:55:04 +0000 (22:55 -0800)]
perf vendor events intel: Refresh skylake metrics and events
Update the skylake metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:55:02 +0000 (22:55 -0800)]
perf vendor events intel: Refresh sapphirerapids metrics and events
Update the sapphirerapids metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
order of metrics varies as TMA metrics are first converted and then
removed if perfmon versions are found. The events are updated to 1.09,
in particular uncore, with fixes to uncore events and improved
descriptions. The formatting changes increase consistency across the
json files.
Ian Rogers [Thu, 15 Dec 2022 06:55:01 +0000 (22:55 -0800)]
perf vendor events intel: Refresh sandybridge metrics and events
Update the sandybridge metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
projects / linux.git / log