Taku Izumi [Fri, 21 Aug 2015 08:29:26 +0000 (17:29 +0900)]
fjes: tx_stall_task
This patch adds tx_stall_task.
When receiver's buffer is full, sender stops
its tx queue. This task is used to monitor
receiver's status and when receiver's buffer
is avairable, it resumes tx queue.
Taku Izumi [Fri, 21 Aug 2015 08:29:25 +0000 (17:29 +0900)]
fjes: raise_intr_rxdata_task
This patch add raise_intr_rxdata_task.
Extended Socket Network Device is shared memory
based, so someone's transmission denotes other's
reception. In order to notify receivers, sender
has to raise interruption of receivers.
raise_intr_rxdata_task does this work.
Taku Izumi [Fri, 21 Aug 2015 08:29:21 +0000 (17:29 +0900)]
fjes: ES information acquisition routine
This patch adds ES information acquisition routine.
ES information can be retrieved issuing information
request command. ES information includes which
receiver is same zone.
This patch adds the basic code of FUJITSU Extended Socket
Network Device driver.
When "PNP0C02" is found in ACPI DSDT, it evaluates "_STR"
to check if "PNP0C02" is for Extended Socket device driver
and retrieves ACPI resource information. Then creates
platform_device.
David S. Miller [Mon, 24 Aug 2015 17:34:40 +0000 (10:34 -0700)]
Merge branch 'ila-precompute'
Tom Herbert says:
====================
ila: Precompute checksums
This patch set:
- Adds argument ot LWT build_state that holds a pointer to the fib
configuration being applied to the new route
- Adds support in ILA to precompute checksum difference for
performance optimization
v2:
- Move return argument in build_state to end of arguments
v3:
- Update the signature for ip6_tun_build_state()
====================
Tom Herbert [Mon, 24 Aug 2015 16:45:42 +0000 (09:45 -0700)]
ila: Precompute checksum difference for translations
In the ILA build state for LWT compute the checksum difference to apply
to transport checksums that include the IPv6 pseudo header. The
difference is between the route destination (from fib6_config) and the
locator to write.
Tom Herbert [Mon, 24 Aug 2015 16:45:41 +0000 (09:45 -0700)]
lwt: Add cfg argument to build_state
Add cfg and family arguments to lwt build state functions. cfg is a void
pointer and will either be a pointer to a fib_config or fib6_config
structure. The family parameter indicates which one (either AF_INET
or AF_INET6).
LWT encpasulation implementation may use the fib configuration to build
the LWT state.
Jaedon Shin [Fri, 21 Aug 2015 01:08:26 +0000 (10:08 +0900)]
net: bcmgenet: fix uncleaned dma flags
Clean the dma flags of multiq ring buffer int the interface stop
process. This patch fixes that the genet is not running while the
interface is re-enabled.
$ ifup eth0 - running after booting
$ ifdown eth0
$ ifup eth0 - not running and occur tx_timeout
The bcmgenet_dma_disable() in bcmgenet_open() do clean ring16 dma flag
only. If the genet has multiq, the dma register is not cleaned. and
bcmgenet_init_dma() is not done correctly. in case
GENET_V2(tx_queues=4), tdma_ctrl has 0x1e after running
bcmgenet_dma_disable().
Florian Fainelli [Fri, 21 Aug 2015 01:04:22 +0000 (18:04 -0700)]
net: bcmgenet: Avoid sleeping in bcmgenet_timeout
bcmgenet_timeout() executes in atomic context, yet we will invoke
napi_disable() which does sleep. Looking back at the changes, disabling
TX napi and re-enabling it is completely useless, since we reclaim all
TX buffers and re-enable interrupts, and wake up the TX queues.
Fixes: 13ea657806cf ("net: bcmgenet: improve TX timeout") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Mon, 24 Aug 2015 03:46:22 +0000 (20:46 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A couple of major (hang and deadlock) fixes with fortunately fairly
rare triggering conditions. The PM oops is only really triggered by
people using enclosure services (rare) and the fnic driver is mostly
used in enterprise environments"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
SCSI: Fix NULL pointer dereference in runtime PM
fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
David S. Miller [Mon, 24 Aug 2015 03:42:57 +0000 (20:42 -0700)]
Merge tag 'nfc-next-4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz says:
====================
NFC 4.3 pull request
This is the NFC pull request for 4.3.
With this one we have:
- A new driver for Samsung's S3FWRN5 NFC chipset. In order to
properly support this driver, a few NCI core routines needed
to be exported. Future drivers like Intel's Fields Peak will
benefit from this.
- SPI support as a physical transport for STM st21nfcb.
- An additional netlink API for sending replies back to userspace
from vendor commands.
Jiri Benc [Fri, 21 Aug 2015 10:41:14 +0000 (12:41 +0200)]
route: fix breakage after moving lwtunnel state
__recnt and related fields need to be in its own cacheline for performance
reasons. Commit 61adedf3e3f1 ("route: move lwtunnel state to dst_entry")
broke that on 32bit archs, causing BUILD_BUG_ON in dst_hold to be triggered.
This patch fixes the breakage by moving the lwtunnel state to the end of
dst_entry on 32bit archs. Unfortunately, this makes it share the cacheline
with __refcnt and may affect performance, thus further patches may be
needed.
Reported-by: kbuild test robot <[email protected]> Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry") Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: David S. Miller <[email protected]>
David S. Miller [Sun, 23 Aug 2015 23:28:18 +0000 (16:28 -0700)]
Merge tag 'linux-can-next-for-4.3-20150820' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
this is a pull request of a two patches for net-next.
The first patch is by Nik Nyby and fixes a typo in a function name. The
second patch by Lucas Stach demotes register output to debug level.
====================
David S. Miller [Sun, 23 Aug 2015 23:14:46 +0000 (16:14 -0700)]
Merge branch 'tipc-failover-fixes'
Jon Maloy says:
====================
tipc: fix link failover/synch problems
We fix three problems with the new link failover/synch implementation,
which was introduced earlier in this release cycle. They are all related
to situations where there is a very short interval between the disabling
and enabling of interfaces.
====================
Jon Paul Maloy [Thu, 20 Aug 2015 06:12:56 +0000 (02:12 -0400)]
tipc: fix stale link problem during synchronization
Recent changes to the link synchronization means that we can now just
drop packets arriving on the synchronizing link before the synch point
is reached. This has lead to significant simplifications to the
implementation, but also turns out to have a flip side that we need
to consider.
Under unlucky circumstances, the two endpoints may end up
repeatedly dropping each other's packets, while immediately
asking for retransmission of the same packets, just to drop
them once more. This pattern will eventually be broken when
the synch point is reached on the other link, but before that,
the endpoints may have arrived at the retransmission limit
(stale counter) that indicates that the link should be broken.
We see this happen at rare occasions.
The fix for this is to not ask for retransmissions when a link is in
state LINK_SYNCHING. The fact that the link has reached this state
means that it has already received the first SYNCH packet, and that it
knows the synch point. Hence, it doesn't need any more packets until the
other link has reached the synch point, whereafter it can go ahead and
ask for the missing packets.
However, because of the reduced traffic on the synching link that
follows this change, it may now take longer to discover that the
synch point has been reached. We compensate for this by letting all
packets, on any of the links, trig a check for synchronization
termination. This is possible because the packets themselves don't
contain any information that is needed for discovering this condition.
Jon Paul Maloy [Thu, 20 Aug 2015 06:12:55 +0000 (02:12 -0400)]
tipc: interrupt link synchronization when a link goes down
When we introduced the new link failover/synch mechanism
in commit 6e498158a827fd515b514842e9a06bdf0f75ab86
("tipc: move link synch and failover to link aggregation level"),
we missed the case when the non-tunnel link goes down during the link
synchronization period. In this case the tunnel link will remain in
state LINK_SYNCHING, something leading to unpredictable behavior when
the failover procedure is initiated.
In this commit, we ensure that the node and remaining link goes
back to regular communication state (SELF_UP_PEER_UP/LINK_ESTABLISHED)
when one of the parallel links goes down. We also ensure that we don't
re-enter synch mode if subsequent SYNCH packets arrive on the remaining
link.
Jon Paul Maloy [Thu, 20 Aug 2015 06:12:54 +0000 (02:12 -0400)]
tipc: eliminate risk of premature link setup during failover
When a link goes down, and there is still a working link towards its
destination node, a failover is initiated, and the failed link is not
allowed to re-establish until that procedure is finished. To ensure
this, the concerned link endpoints are set to state LINK_FAILINGOVER,
and the node endpoints to NODE_FAILINGOVER during the failover period.
However, if the link reset is due to a disabled bearer, the corres-
ponding link endpoint is deleted, and only the node endpoint knows
about the ongoing failover. Now, if the disabled bearer is re-enabled
during the failover period, the discovery mechanism may create a new
link endpoint that is ready to be established, despite that this is not
permitted. This situation may cause both the ongoing failover and any
subsequent link synchronization to fail.
In this commit, we ensure that a newly created link goes directly to
state LINK_FAILINGOVER if the corresponding node state is
NODE_FAILINGOVER. This eliminates the problem described above.
Furthermore, we tighten the criteria for which packets are allowed
to end a failover state in the function tipc_node_check_state().
By checking that the receiving link is up and running, instead of just
checking that it is not in failover mode, we eliminate the risk that
protocol packets from the re-created link may cause the failover to
be prematurely terminated.
David S. Miller [Sun, 23 Aug 2015 23:08:54 +0000 (16:08 -0700)]
Merge branch 'nps_enet_fixes'
Noam Camus says:
====================
*** nps_enet fixups ***
Change v2
TX done is handled back with NAPI poll.
Change v1
This patch set is a bunch of fixes to make nps_enet work correctly with
all platforms, i.e. real device, emulation system, and simulation system.
The main trigger for this patch set was that in our emulation system
the TX end interrupt is "edge-sensitive" and therefore we cannot use the
cause register since it is not sticky.
Also:
TX is handled during HW interrupt context and not NAPI job.
race with TX done was fixed.
added acknowledge for TX when device is "level sensitive".
enable drop of control frames which is not needed for regular usage.
So most of this patch set is about TX handling, which is now more complete.
====================
Noam Camus [Thu, 20 Aug 2015 05:00:05 +0000 (08:00 +0300)]
NET: nps_enet: minor namespace cleanup
We define buf_int_enable in the minimal namespace it is used. Signed-off-by: Noam Camus <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Noam Camus [Thu, 20 Aug 2015 05:00:02 +0000 (08:00 +0300)]
NET: nps_enet: TX done race condition
We need to set tx_skb pointer before send frame.
If we receive interrupt before we set pointer we will try
to free SKB with wrong pointer.
Now we are sure that SKB pointer will never be NULL during
handling TX done and check is removed.
Noam Camus [Thu, 20 Aug 2015 05:00:01 +0000 (08:00 +0300)]
NET: nps_enet: replace use of cause register
When interrupt is received we read directly from control
register for RX/TX instead of reading cause register
since this register fails to indicate TX done when
TX interrupt is "edge mode".
David S. Miller [Sun, 23 Aug 2015 22:59:57 +0000 (15:59 -0700)]
Merge branch 'gro_tunnels'
Tom Herbert says:
====================
gro: Fixes for tunnels and GRO
This patch set addresses some issue related to tunneling and GRO:
- Fix remote checksum offload to properly deal with frag0 in GRO.
- Add support for GRO at VXLAN tunnel (call gro_cells)
Testing: Ran one netperf TCP_STREAM to highlight impact of different
configurations:
GUE
Zero UDP checksum
4628.42 MBps
UDP checksums enabled
6800.51 MBps
UDP checksums and remote checksum offload
7663.82 MBps
UDP checksums and remote checksum offload using no-partial
7287.25 MBps
VXLAN
Zero UDP checksum
4112.02
UDP checksums enabled
6785.80 MBps
UDP checksums and remote checksum offload
7075.56 MBps
v2:
- Drop "gro: Pull headers into skb head for 1st skb in gro list"
from patch set
- In vxlan_remcsum and gue_remcsum return immediately if remcsum
processing was already done
- Add gro callbacks for sit offload
- Use WARN_ON_ONCE if we get a GUE protocol that does not have
GRO offload support
v3:
- Don't restore gro callbacks for sit offload
====================
Tom Herbert [Thu, 20 Aug 2015 00:07:32 +0000 (17:07 -0700)]
gro: Fix remcsum offload to deal with frags in GRO
The remote checksum offload GRO did not consider the case that frag0
might be in use. This patch fixes that by accessing headers using the
skb_gro functions and not saving offsets relative to skb->head.
Vivien Didelot [Wed, 19 Aug 2015 22:54:55 +0000 (18:54 -0400)]
net: dsa: mv88e6xxx: set 802.1Q mode to Fallback
The current Secure port mode requires the port-based VLANs to also be
valid in the 802.1Q VLAN Table Unit. The current hardware bridging
support only configures the port-based VLANs, thus is broken.
A new patchset is required to adapt the hardware bridging code to fully
support the Secure port mode.
In the meantime, change the 802.1Q mode of every ports to Fallback,
which filtering is more permissive, and doesn't add this restriction to
handle port-based and tagged-based VLANs.
Fixes: 8efdda4a1b60 ("net: dsa: mv88e6xxx: use port 802.1Q mode Secure") Signed-off-by: Vivien Didelot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Linus Torvalds [Sun, 23 Aug 2015 14:23:09 +0000 (07:23 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS bug fixes from Ralf Baechle:
"Two more fixes for 4.2.
One fixes a build issue with the LLVM assembler - LLVM assembler macro
names are case sensitive, GNU as macro names are insensitive; the
other corrects a license string (GPL v2, not GPLv2) such that the
module loader will recognice the license correctly"
Johannes Berg [Tue, 18 Aug 2015 13:15:36 +0000 (15:15 +0200)]
iwlwifi: mvm: support new TX power command
Add support for the new (bigger) TX power command. This doesn't
actually take advantage of the new capabilities (to set per-chain
TX power limits) but makes the code compatible with newer firmware
images expecting the larger command.
Johannes Berg [Wed, 19 Aug 2015 14:51:33 +0000 (16:51 +0200)]
iwlwifi: correctly size command string arrays
The command string array is assumed to be indexable by a full u8, so it
must have 256 entries (0-255), not just 255. A recent firmware change
(apparently) started using the command 0xff for a notification to the
host, causing the driver to crash in debug message/tracing code.
Dan Carpenter [Fri, 21 Aug 2015 08:48:21 +0000 (11:48 +0300)]
iwlwifi: mvm: catch underflow error earlier
My static checker complains that we don't check for underflows in
iwl_dbgfs_fw_dbg_conf_write(). This is harmless because we have a
sanity check in iwl_mvm_start_fw_dbg_conf(), but we may as well make
this unsigned and silence the underflow warning.
Vincent Bernat [Sat, 15 Aug 2015 13:49:13 +0000 (15:49 +0200)]
9p: ensure err is initialized to 0 in p9_client_read/write
Some use of those functions were providing unitialized values to those
functions. Notably, when reading 0 bytes from an empty file on a 9P
filesystem, the return code of read() was not 0.
Linus Torvalds [Sat, 22 Aug 2015 22:48:04 +0000 (15:48 -0700)]
Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Another couple of small ARM fixes.
A patch from Masahiro Yamada who noticed that "make -jN all zImage"
would end up generating bad images where N > 1, and a patch from
Nicolas to fix the Marvell CPU user access optimisation code when page
faults are disabled"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
ARM: 8418/1: add boot image dependencies to not generate invalid images
ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage
Linus Torvalds [Sat, 22 Aug 2015 15:15:36 +0000 (08:15 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Various low level fixes: fix more fallout from the FPU rework and the
asm entry code rework, plus an MSI rework fix, and an idle-tracing fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/math-emu: Fix crash in fork()
x86/fpu/math-emu: Fix math-emu boot crash
x86/idle: Restore trace_cpu_idle to mwait_idle() calls
x86/irq: Build correct vector mapping for multiple MSI interrupts
Revert "sched/x86_64: Don't save flags on context switch"
Linus Torvalds [Sat, 22 Aug 2015 15:06:28 +0000 (08:06 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Tooling fixes: a 'perf record' deadlock fix plus debuggability fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf top: Show backtrace when handling a SIGSEGV on --stdio mode
perf tools: Fix buildid processing
perf tools: Make fork event processing more resilient
perf tools: Avoid deadlock when map_groups are broken
Thomas Gleixner [Sat, 22 Aug 2015 14:41:17 +0000 (16:41 +0200)]
x86/apic: Fix fallout from x2apic cleanup
In the recent x2apic cleanup I got two things really wrong:
1) The safety check in __disable_x2apic which allows the function to
be called unconditionally is backwards. The check is there to
prevent access to the apic MSR in case that the machine has no
apic. Though right now it returns if the machine has an apic and
therefor the disabling of x2apic is never invoked.
2) x2apic_disable() sets x2apic_mode to 0 after registering the local
apic. That's wrong, because register_lapic_address() checks x2apic
mode and therefor takes the wrong code path.
This results in boot failures on machines with x2apic preenabled by
BIOS and can also lead to an fatal MSR access on machines without
apic.
The solutions are simple:
1) Correct the sanity check for apic availability
2) Clear x2apic_mode _before_ calling register_lapic_address()
Linus Torvalds [Sat, 22 Aug 2015 14:45:36 +0000 (07:45 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A series of small fixlets for a regression visible on OMAP devices
caused by the conversion of the OMAP interrupt chips to hierarchical
interrupt domains. Mostly one liners on the driver side plus a small
helper function in the core to avoid open coded mess in the drivers"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/crossbar: Restore set_wake functionality
irqchip/crossbar: Restore the mask on suspend behaviour
ARM: OMAP: wakeupgen: Restore the irq_set_type() mechanism
irqchip/crossbar: Restore the irq_set_type() mechanism
genirq: Introduce irq_chip_set_type_parent() helper
genirq: Don't return ENOSYS in irq_chip_retrigger_hierarchy
Linus Torvalds [Sat, 22 Aug 2015 14:37:41 +0000 (07:37 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two minimalistic fixes for 4.2 regressions:
- Eric fixed a thinko in the timer_list base switching code caused by
the overhaul of the timer wheel. It can cause a cpu to see the
wrong base for a timer while we move the timer around.
- Guenter fixed a regression for IMX if booted w/o device tree, where
the timer interrupt is not initialized and therefor the machine
fails to boot"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/imx: Fix boot with non-DT systems
timer: Write timer->flags atomically
b1276c48e91b ("x86/fpu: Initialize fpregs in fpu__init_cpu_generic()")
I failed to consider math-emu's limitation that it cannot execute the
FNINIT instruction in kernel mode.
The long term fix might be to allow math-emu to execute (certain) kernel
mode FPU instructions, but for now apply the safe (albeit somewhat ugly)
fix: initialize the emulation state explicitly without trapping out to
the FPU emulator.
While the idea behind get_maintainer seems highly useful it's
unfortunately way to trigger happy to grab people that once had a few
commits to files. For someone like me who does a lot of tree-wide API
work that leads to an incredible amount of Cc spam.
Michal Hocko [Fri, 21 Aug 2015 21:11:51 +0000 (14:11 -0700)]
mm: make page pfmemalloc check more robust
Commit c48a11c7ad26 ("netvm: propagate page->pfmemalloc to skb") added
checks for page->pfmemalloc to __skb_fill_page_desc():
if (page->pfmemalloc && !page->mapping)
skb->pfmemalloc = true;
It assumes page->mapping == NULL implies that page->pfmemalloc can be
trusted. However, __delete_from_page_cache() can set set page->mapping
to NULL and leave page->index value alone. Due to being in union, a
non-zero page->index will be interpreted as true page->pfmemalloc.
So the assumption is invalid if the networking code can see such a page.
And it seems it can. We have encountered this with a NFS over loopback
setup when such a page is attached to a new skbuf. There is no copying
going on in this case so the page confuses __skb_fill_page_desc which
interprets the index as pfmemalloc flag and the network stack drops
packets that have been allocated using the reserves unless they are to
be queued on sockets handling the swapping which is the case here and
that leads to hangs when the nfs client waits for a response from the
server which has been dropped and thus never arrive.
The struct page is already heavily packed so rather than finding another
hole to put it in, let's do a trick instead. We can reuse the index
again but define it to an impossible value (-1UL). This is the page
index so it should never see the value that large. Replace all direct
users of page->pfmemalloc by page_is_pfmemalloc which will hide this
nastiness from unspoiled eyes.
The information will get lost if somebody wants to use page->index
obviously but that was the case before and the original code expected
that the information should be persisted somewhere else if that is
really needed (e.g. what SLAB and SLUB do).
Linus Torvalds [Fri, 21 Aug 2015 18:18:10 +0000 (11:18 -0700)]
Merge tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for ASPM-related NULL pointer dereference crashes on
Sparc and PowerPC and 64-bit PCI address-related HPMC crashes on
PA-RISC. These are both caused by things we merged in the v4.2 merge
window. Details:
Resource management
- Don't use 64-bit bus addresses on PA-RISC
Miscellaneous
- Tolerate hierarchies with no Root Port"
* tag 'pci-v4.2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Don't use 64-bit bus addresses on PA-RISC
PCI: Tolerate hierarchies with no Root Port
Linus Torvalds [Fri, 21 Aug 2015 17:46:56 +0000 (10:46 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A bunch of i915 fixes, one revert a VBT fix that was a bit premature,
and some braswell feature removal that the hw actually didn't support.
One radeon race fix at boot, and one hlcdc build fix, one fix from
Russell that fixes build as well with new audio features.
This is hopefully all I have until -next"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: fix hotplug race at startup
drm/edid: add function to help find SADs
drm/i915: Avoid TP3 on CHV
drm/i915: remove HBR2 from chv supported list
Revert "drm/i915: Add eDP intermediate frequencies for CHV"
Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
drm/atmel-hlcdc: Compile suspend/resume for PM_SLEEP only
drm/i915: Flag the execlists context object as dirty after every use
====================
Netfilter updates for net-next
This is second pull request includes the conflict resolution patch that
resulted from the updates that we got for the conntrack template through
kmalloc. No changes with regards to the previously sent 15 patches.
The following patchset contains Netfilter updates for your net-next tree, they
are:
1) Rework the existing nf_tables counter expression to make it per-cpu.
2) Prepare and factor out common packet duplication code from the TEE target so
it can be reused from the new dup expression.
3) Add the new dup expression for the nf_tables IPv4 and IPv6 families.
4) Convert the nf_tables limit expression to use a token-based approach with
64-bits precision.
5) Enhance the nf_tables limit expression to support limiting at packet byte.
This comes after several preparation patches.
6) Add a burst parameter to indicate the amount of packets or bytes that can
exceed the limiting.
7) Add netns support to nfacct, from Andreas Schultz.
8) Pass the nf_conn_zone structure instead of the zone ID in nf_tables to allow
accessing more zone specific information, from Daniel Borkmann.
9) Allow to define zone per-direction to support netns containers with
overlapping network addressing, also from Daniel.
10) Extend the CT target to allow setting the zone based on the skb->mark as a
way to support simple mappings from iptables, also from Daniel.
11) Make the nf_tables payload expression aware of the fact that VLAN offload
may have removed a vlan header, from Florian Westphal.
====================
Dave Airlie [Fri, 21 Aug 2015 00:44:03 +0000 (10:44 +1000)]
Merge tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Revert of a VBT parsing commit that should've been queued for drm-next,
not v4.2. The revert unbreaks Braswell among other things.
Also on Braswell removal of DP HBR2/TP3 and intermediate eDP frequency
support. The code was optimistically added based on incorrect
documentation; the platform does not support them. These are cc: stable.
Finally a gpu state fix from Chris, also cc: stable.
* tag 'drm-intel-fixes-2015-08-20' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Avoid TP3 on CHV
drm/i915: remove HBR2 from chv supported list
Revert "drm/i915: Add eDP intermediate frequencies for CHV"
Revert "drm/i915: Allow parsing of variable size child device entries from VBT"
drm/i915: Flag the execlists context object as dirty after every use
Linus Torvalds [Fri, 21 Aug 2015 00:06:11 +0000 (17:06 -0700)]
Merge tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix a recent regression in the ACPI backlight code and a memory
leak in the Exynos cpufreq driver.
Specifics:
- Fix a recently introduced issue in the ACPI backlight code which
causes lockdep to complain about a circular lock dependency during
initialization (Hans de Goede).
- Fix a possible memory during initialization in the Exynos cpufreq
driver (Shailendra Verma)"
* tag 'pm+acpi-4.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: exynos: Fix for memory leak in case SoC name does not match
ACPI / video: Fix circular lock dependency issue in the video-detect code
Jiri Benc [Thu, 20 Aug 2015 11:56:32 +0000 (13:56 +0200)]
ipv6: route: per route IP tunnel metadata via lightweight tunnel
Allow specification of per route IP tunnel instructions also for IPv6.
This complements commit 3093fbe7ff4b ("route: Per route IP tunnel metadata
via lightweight tunnel").
Jiri Benc [Thu, 20 Aug 2015 11:56:31 +0000 (13:56 +0200)]
ipv6: route: extend flow representation with tunnel key
Use flowi_tunnel in flowi6 similarly to what is done with IPv4.
This complements commit 1b7179d3adff ("route: Extend flow representation
with tunnel key").
Jiri Benc [Thu, 20 Aug 2015 11:56:26 +0000 (13:56 +0200)]
ipv6: drop metadata dst in ip6_route_input
The fix in commit 48fb6b554501 is incomplete, as now ip6_route_input can be
called with non-NULL dst if it's a metadata dst and the reference is leaked.
Drop the reference.
Jiri Benc [Thu, 20 Aug 2015 11:56:25 +0000 (13:56 +0200)]
route: move lwtunnel state to dst_entry
Currently, the lwtunnel state resides in per-protocol data. This is
a problem if we encapsulate ipv6 traffic in an ipv4 tunnel (or vice versa).
The xmit function of the tunnel does not know whether the packet has been
routed to it by ipv4 or ipv6, yet it needs the lwtstate data. Moving the
lwtstate data to dst_entry makes such inter-protocol tunneling possible.
Jiri Benc [Thu, 20 Aug 2015 11:56:20 +0000 (13:56 +0200)]
ip_tunnels: remove custom alignment and packing
The custom alignment of struct ip_tunnel_key is unnecessary. In struct
sw_flow_key, it starts at offset 256, in struct ip_tunnel_info it's the
first field.
The structure is also packed even without the __packed keyword.
Bjorn Helgaas [Thu, 20 Aug 2015 05:08:15 +0000 (00:08 -0500)]
PCI: Don't use 64-bit bus addresses on PA-RISC
Meelis and Helge reported that 3a9ad0b4fdcd ("PCI: Add pci_bus_addr_t")
caused HPMCs on A500 and hangs on rp5470.
PA-RISC does not set ARCH_DMA_ADDR_T_64BIT, even for 64-bit kernels, so
prior to 3a9ad0b4fdcd, we always used 32-bit PCI addresses. After 3a9ad0b4fdcd, we do use 64-bit PCI addresses in 64-bit kernels, and
apparently there's some PA-RISC problem related to them.
David Ahern [Wed, 19 Aug 2015 18:40:31 +0000 (11:40 -0700)]
net: Fix nexthop lookups
Andreas reported breakage adding routes with local nexthops:
$ ip route show table main
...
172.28.0.0/24 dev vnf-xe1p0 proto kernel scope link src 172.28.0.16
$ ip route add 10.0.0.0/8 via 172.28.0.32 table 100 dev vnf-xe1p0
RTNETLINK answers: Resource temporarily unavailable
3bfd847203c changed the lookup to use the passed in table but for cases like
this the nexthop is in the local table rather than the passed in table.
Fixes: 3bfd847203c ("net: Use passed in table for nexthop lookups") Reported-by: Andreas Schultz <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Scott Feldman [Wed, 19 Aug 2015 18:29:35 +0000 (11:29 -0700)]
bridge: fix netlink max attr size
.maxtype should match .policy. Probably just been getting lucky here
because IFLA_BRPORT_MAX > IFLA_BR_MAX.
Fixes: 13323516 ("bridge: implement rtnl_link_ops->changelink") Signed-off-by: Scott Feldman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jeremy Linton [Wed, 19 Aug 2015 16:46:43 +0000 (11:46 -0500)]
smsc911x: Remove dev==NULL check.
The dev==NULL check in smsc911x_probe_config is useless
and isn't providing any additional protection. If a fwnode
doesn't exist then an appropriate error should be returned
by device_get_phy_mode() covering the original case
of a missing of/fwnode.
This patch adds MAC address length check back into
the device_get_mac_addr() function before calling
is_valid_ether_addr() similar to the way the OF
routine does it.
David S. Miller [Thu, 20 Aug 2015 21:13:25 +0000 (14:13 -0700)]
Merge tag 'wireless-drivers-next-for-davem-2015-08-19' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
Major changes:
ath10k:
* add support for qca99x0 family of devices
* improve performance of tx_lock
* add support for raw mode (802.11 frame format) and software crypto
engine enabled via a module parameter
ath9k:
* add fast-xmit support
wil6210:
* implement TSO support
* support bootloader v1 and onwards
iwlwifi:
* Deprecate -10.ucode
* Clean ups towards multiple Rx queues
* Add support for longer CMD IDs. This will be required by new
firmwares since we are getting close to the u8 limit.
* bugfixes for the D0i3 power state
* Add basic support for FTM
* polish the Miracast operation
* fix a few power consumption issues
* scan cleanup
* fixes for D0i3 system state
* add paging for devices that support it
* add again the new RBD allocation model
* add more options to the firmware debug system
* add support for frag SKBs in Tx
====================
David S. Miller [Thu, 20 Aug 2015 21:10:23 +0000 (14:10 -0700)]
Merge branch 'ewma'
Johannes Berg says:
====================
average: convert users to inline implementation
Since there's very little benefit of the out-of-line implementation
(a single byte of .text in one driver as far as I've seen), convert
all drivers to the inline implementation, saving memory, and remove
the out-of-line implementation.
====================
Johannes Berg [Wed, 19 Aug 2015 07:46:21 +0000 (09:46 +0200)]
rt2x00: use DECLARE_EWMA
Instead of using the out-of-line EWMA calculation, use DECLARE_EWMA()
to create static inlines. On x86/64 this results in code that's one
byte larger (for me), but reduces struct link_ant and struct link
size by the two unsigned long values that store the parameters each.
projects / linux.git / log