Merge branch 'x86/mm' into efi/core, to pick up dependencies

Signed-off-by: Ingo Molnar <[email protected]>

Merge branch 'linus' into efi/core, to pick up fixes

Signed-off-by: Ingo Molnar <[email protected]>

nvmet: fix per feat data len for get_feature

The existing implementation for the get_feature admin-cmd does not
use per-feature data len. This patch introduces a new helper function
nvmet_feat_data_len(), which is used to calculate per feature data len.
Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID).

Fixes: commit e9061c397839 ("nvmet: Remove the data_len field from the nvmet_req struct")
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Amit Engel <[email protected]>
[endiness, naming, and kernel style fixes]
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>

nvme: Translate more status codes to blk_status_t

Decode interrupted command and not ready namespace nvme status codes to
BLK_STS_TARGET. These are not generic IO errors and should use a non-path
specific error so that it can use the non-failover retry path.

Reported-by: John Meneghini <[email protected]>
Cc: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>

HID: hidraw, uhid: Always report EPOLLOUT

hidraw and uhid device nodes are always available for writing so we should
always report EPOLLOUT and EPOLLWRNORM bits, not only in the cases when
there is nothing to read.

Reported-by: Linus Torvalds <[email protected]>
Fixes: be54e7461ffdc ("HID: uhid: Fix returning EPOLLOUT from uhid_char_poll")
Fixes: 9f3b61dc1dd7b ("HID: hidraw: Fix returning EPOLLOUT from hidraw_poll")
Signed-off-by: Jiri Kosina <[email protected]>

ASoC: stm32: dfsdm: fix 16 bits record

In stm32_afsdm_pcm_cb function, the transfer size is provided in bytes.
However, samples are copied as 16 bits words from iio buffer.
Divide by two the transfer size, to copy the right number of samples.

Fixes: 1e7f6e1c69f0 ("ASoC: stm32: dfsdm: add 16 bits audio record support")
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

Merge branch 'powercap'

* powercap:
  powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()

scsi: enclosure: Fix stale device oops with hot replug

Doing an add/remove/add on a SCSI device in an enclosure leads to an oops
caused by poisoned values in the enclosure device list pointers.  The
reason is because we are keeping the enclosure device across the enclosed
device add/remove/add but the current code is doing a
device_add/device_del/device_add on it.  This is the wrong thing to do in
sysfs, so fix it by not doing a device_del on the enclosure device simply
because of a hot remove of the drive in the slot.

[mkp: added missing email addresses]

Fixes: 43d8eb9cfd0a ("[SCSI] ses: add support for enclosure component hot removal")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: James Bottomley <[email protected]>
Reported-by: Luo Jiaxing <[email protected]>
Tested-by: John Garry <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

scsi: sd: Clear sdkp->protection_type if disk is reformatted without PI

If an attached disk with protection information enabled is reformatted
to Type 0 the revalidation code does not clear the original protection
type and subsequent accesses will keep setting RDPROTECT/WRPROTECT.

Set the protection type to 0 if the disk reports PROT_EN=0 in READ
CAPACITY(16).

[mkp: commit desc]

Fixes: fe542396da73 ("[SCSI] sd: Ensure we correctly disable devices with unknown protection type")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Xiang Chen <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>

Merge tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull pstore fix from Kees Cook:
 "Cengiz Can forwarded a Coverity report about more problems with a rare
  pstore initialization error path, so the allocation lifetime was
  rearranged to avoid needing to share the kfree() responsibilities
  between caller and callee"

* tag 'pstore-v5.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: Regularize prz label allocation lifetime

Merge tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Pre-LCA pull request I'm not sure how things will look next week,
  myself and Daniel are at LCA and I'm speaking quite late, so if I get
  my talk finished I'll probably process fixes.

  This week has a bunch of i915 fixes, some amdgpu fixes, one sun4i, one
  core MST, and one core fb_helper fix. More details below:

  core:
   - mst Fix NO_STOP_BIT bit offset (Wayne)

  fb_helper:
   - fb_helper: Fix bits_per_pixel param set behavior to round up
     (Geert)

  sun4i:
   - Fix RGB_DIV clock min divider on old hardware (Chen-Yu)

  amdgpu:
   - Stability fix for raven
   - Reduce pixel encoding to if max clock is exceeded on HDMI to allow
     additional high res modes
   - enable DRIVER_SYNCOBJ_TIMELINE for amdgpu

  i915:
   - Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS
     state
   - Fix GitLab issue #846: Restore coarse power gating that was
     disabled by initial RC66 context corruption security fixes.
   - Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK
     constraint to more platforms") to avoid screen flicker
   - Fix to fill in unitialized uabi_instance in virtual engine uAPI
   - Add two missing W/As for ICL and EHL"

* tag 'drm-fixes-2020-01-10' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpu
  drm/amd/display: Reduce HDMI pixel encoding if max clock is exceeded
  Revert "drm/amdgpu: Set no-retry as default."
  drm/fb-helper: Round up bits_per_pixel if possible
  drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
  drm/i915/dp: Disable Port sync mode correctly on teardown
  drm/i915: Add Wa_1407352427:icl,ehl
  drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehl
  drm/i915/gt: Restore coarse power gating
  drm/i915/gt: Do not restore invalid RS state
  drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK only
  drm/i915/gt: Mark up virtual engine uabi_instance
  drm/dp_mst: correct the shifting in DP_REMOTE_I2C_READ

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "First RDMA subsystem updates for 5.5-rc. A very small set of fixes,
  most people seem to still be recovering from December!

  Five small driver fixes:

   - Fix error flow with MR allocation in bnxt_re

   - An errata work around for bnxt_re

   - Misuse of the workqueue API in hfi1

   - Protocol error in hfi1

   - Regression in 5.5 related to the mmap rework with i40iw"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  i40iw: Remove setting of VMA private data and use rdma_user_mmap_io
  IB/hfi1: Adjust flow PSN with the correct resync_psn
  IB/hfi1: Don't cancel unused work item
  RDMA/bnxt_re: Fix Send Work Entry state check while polling completions
  RDMA/bnxt_re: Avoid freeing MR resources if dereg fails

Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2020-01-09

This series contains fixes to e1000e, igb, ixgbe, ixgbevf, i40e and iavf
drivers.

Brett fixes the validation of the virtchnl queue select bitmaps by
comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES).

Radoslaw removes the limitation of only 10 filter entries for a VF and
allows use of all free RAR entries for the forwarding database, if
needed.

Cambda Zhu fixes the calculation of queue when restoring flow director
filters after resetting the adapter for ixgbe.

Manfred Rudigier fixes the SGMIISFP module discovery for 100FX/LX
modules for igb.

Stefan Assmann fixes iavf where during a VF reset event, MAC filters
were not altered, which could lead to a stale filter when an
administratively set MAC address is forced by the PF.

Adam adds the missing code to set the PHY access flag on X722 devices,
which supports accessing PHY registers with the admin queue command.

Revert a previous commit for e1000e to use "delayed work" which was
causing connections to reset unexpectedly and possible driver crashes.
====================

Signed-off-by: David S. Miller <[email protected]>

net/x25: fix nonblocking connect

This patch fixes 2 issues in x25_connect():

1. It makes absolutely no sense to reset the neighbour and the
connection state after a (successful) nonblocking call of x25_connect.
This prevents any connection from being established, since the response
(call accept) cannot be processed.

2. Any further calls to x25_connect() while a call is pending should
simply return, instead of creating new Call Request (on different
logical channels).

This patch should also fix the "KASAN: null-ptr-deref Write in
x25_connect" and "BUG: unable to handle kernel NULL pointer dereference
in x25_connect" bugs reported by syzbot.

Signed-off-by: Martin Schiller <[email protected]>
Reported-by: [email protected]
Reported-by: [email protected]
Signed-off-by: David S. Miller <[email protected]>

sh_eth: check sh_eth_cpu_data::dual_port when dumping registers

When adding the sh_eth_cpu_data::dual_port flag I forgot to add the flag
checks to __sh_eth_get_regs(), causing the non-existing TSU registers to
be dumped by 'ethtool' on the single port Ether controllers having TSU...

Fixes: a94cf2a614f8 ("sh_eth: fix TSU init on SH7734/R8A7740")
Signed-off-by: Sergei Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge tag 'drm-intel-fixes-2020-01-09-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix GitLab issue #446 causing GPU hangs: Do not restore invalid RS state
- Fix GitLab issue #846: Restore coarse power gating that was disabled
  by initial RC66 context corruption security fixes.
- Revert f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms")
  to avoid screen flicker
- Fix to fill in unitialized uabi_instance in virtual engine uAPI
- Add two missing W/As for ICL and EHL

Signed-off-by: Dave Airlie <[email protected]>
From: Joonas Lahtinen <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Merge tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
 "Here is a host of GPIO fixes for the v5.5 series. The ACPI fix is
  especially important, see summary below and in the commit for details:

   - Select GPIOLIB_IRQCHIP on the max77620 GPIO expander

   - Fix context restore in the Zynq driver

   - Create a new ACPI quirk handler for disabling wakeups on
     problematic hardware.

   - Fix a coding style issue on the mockup device"

* tag 'gpio-v5.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism
  gpiolib: acpi: Turn dmi_system_id table into a generic quirk table
  gpio: zynq: Fix for bug in zynq_gpio_restore_context API
  gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIP
  gpio: mockup: fix coding style

Merge tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Two fixes for pin control, not much to say about it, it's just regular
  driver fixes:

   - Fix erroneous shift in the Meson driver

   - Make Lochnagar select the GPIOLIB Kconfig symbol"

* tag 'pinctrl-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: meson: Fix wrong shift value when get drive-strength
  pinctrl: lochnagar: select GPIOLIB

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "Just a few small fixups here"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: imx_sc_key - only take the valid data from SCU firmware as key state
  Input: add safety guards to input_set_keycode()
  Input: input_event - fix struct padding on sparc64
  Input: uinput - always report EPOLLOUT

bpf/sockmap: Read psock ingress_msg before sk_receive_queue

Right now in tcp_bpf_recvmsg, sock read data first from sk_receive_queue
if not empty than psock->ingress_msg otherwise. If a FIN packet arrives
and there's also some data in psock->ingress_msg, the data in
psock->ingress_msg will be purged. It is always happen when request to a
HTTP1.0 server like python SimpleHTTPServer since the server send FIN
packet after data is sent out.

Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: Arika Chen <[email protected]>
Suggested-by: Arika Chen <[email protected]>
Signed-off-by: Lingpeng Chen <[email protected]>
Signed-off-by: John Fastabend <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]

i2c: fix bus recovery stop mode timing

The I2C specification states that tsu:sto for standard mode timing must
be at minimum 4us. Pictographically, this is:

SCL: ____/~~~~~~~~~
SDA: _________/~~~~
       ->|    |<- 4us minimum

We are currently waiting 2.5us between asserting SCL and SDA, which is
in violation of the standard. Adjust the timings to ensure that we meet
what is stipulated as the minimum timings to ensure that all devices
correctly interpret the STOP bus transition.

This is more important than trying to generate a square wave with even
duty cycle.

Signed-off-by: Russell King <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>

ASoC: stm32: sai: fix possible circular locking

In current driver, locks can be taken as follows:
- Register access: take a lock on regmap config and then on clock.
- Master clock provider: take a lock on clock and then on regmap config.
This can lead to the circular locking summarized below.

Remove peripheral clock management through regmap framework, and manage
peripheral clock in driver instead. On register access, lock on clock
is taken first, which allows to avoid possible locking issue.

[ 6696.561513] ======================================================
[ 6696.567670] WARNING: possible circular locking dependency detected
[ 6696.573842] 4.19.49 #866 Not tainted
[ 6696.577397] ------------------------------------------------------
[ 6696.583566] pulseaudio/6439 is trying to acquire lock:
[ 6696.588697] 87b0a25b (enable_lock){..-.}, at: clk_enable_lock+0x64/0x128
[ 6696.595377]
[ 6696.595377] but task is already holding lock:
[ 6696.601197] d858f825 (stm32_sai_sub:1342:(sai->regmap_config)->lock){....}
...
[ 6696.812513]  Possible unsafe locking scenario:
[ 6696.812513]
[ 6696.818418]        CPU0                    CPU1
[ 6696.822935]        ----                    ----
[ 6696.827451]   lock(stm32_sai_sub:1342:(sai->regmap_config)->lock);
[ 6696.833618]                                lock(enable_lock);
[ 6696.839350]                                lock(stm32_sai_sub:1342:
                                              (sai->regmap_config)->lock);
[ 6696.848035]   lock(enable_lock);

Fixes: 03e78a242a15 ("ASoC: stm32: sai: add h7 support")
Signed-off-by: Olivier Moysan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

mtd: spi-nor: Fix the writing of the Status Register on micron flashes

Micron flashes do not support 16 bit writes on the Status Register.
According to micron datasheets, when using the Write Status Register
(01h) command, the chip select should be driven LOW and held LOW until
the eighth bit of the last data byte has been latched in, after which
it must be driven HIGH. If CS is not driven HIGH, the command is not
executed, flag status register error bits are not set, and the write enable
latch remains set to 1. This fixes the lock operations on micron flashes.

Reported-by: John Garry <[email protected]>
Fixes: 39d1e3340c73 ("mtd: spi-nor: Fix clearing of QE bit on lock()/unlock()")
Signed-off-by: Tudor Ambarus <[email protected]>
Tested-by: John Garry <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>

mtd: sm_ftl: fix NULL pointer warning

With gcc -O3, we get a new warning:

In file included from arch/arm64/include/asm/processor.h:28,
                 from drivers/mtd/sm_ftl.c:8:
In function 'memset',
    inlined from 'sm_read_sector.constprop' at drivers/mtd/sm_ftl.c:250:3:
include/linux/string.h:411:9: error: argument 1 null where non-null expected [-Werror=nonnull]
  return __builtin_memset(p, c, size);

>From all I can tell, this cannot happen (the function is called
either with a NULL buffer or with a -1 block number but not both),
but adding a check makes it more robust and avoids the warning.

Fixes: mmtom ("init/Kconfig: enable -O3 for all arches")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>

mtd: onenand: omap2: Pass correct flags for prep_dma_memcpy

The commit converting the driver to DMAengine was missing the flags for
the memcpy prepare call.
It went unnoticed since the omap-dma driver was ignoring them.

Fixes: 3ed6a4d1de2c5 (" mtd: onenand: omap2: Convert to use dmaengine for memcp")
Reported-by: Aaro Koskinen <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Tested-by: H. Nikolaus Schaller <[email protected]>
Tested-by: Aaro Koskinen <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>

mtd: onenand: samsung: Fix iomem access with regular memcpy

The __iomem memory should be copied with memcpy_fromio.  This fixes
Sparse warnings like:

    drivers/mtd/nand/onenand/samsung_mtd.c:678:40: warning: incorrect type in argument 2 (different address spaces)
    drivers/mtd/nand/onenand/samsung_mtd.c:678:40:    expected void const *from
    drivers/mtd/nand/onenand/samsung_mtd.c:678:40:    got void [noderef] <asn:2> *[assigned] p
    drivers/mtd/nand/onenand/samsung_mtd.c:679:19: warning: incorrect type in assignment (different address spaces)
    drivers/mtd/nand/onenand/samsung_mtd.c:679:19:    expected void [noderef] <asn:2> *[assigned] p
    drivers/mtd/nand/onenand/samsung_mtd.c:679:19:    got unsigned char *

Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>

mtd: onenand: omap2: Fix errors in style

Correct mispelling, spacing, and coding style flaws caught by
checkpatch.pl script in the Omap2 Onenand driver .

Signed-off-by: Amir Mahdi Ghorbanian <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>

mtd: cadence: Fix cast to pointer from integer of different size warning

Use dma_addr_t type to pass memory address and control data in
DMA descriptor fields memory_pointer and ctrl_data_ptr
To fix warning: cast to pointer from integer of different size

Signed-off-by: Vasyl Gomonovych <[email protected]>
Acked-by: Olof Johansson <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>

mtd: rawnand: stm32_fmc2: avoid to lock the CPU bus

We are currently using nand_soft_waitrdy to poll the status of the NAND
flash. FMC2 enables the wait feature bit (this feature is mandatory for
the sequencer mode). By enabling this feature, we can't poll the status
of the NAND flash, the read status command is stucked in FMC2 pipeline
until R/B# signal is high, and locks the CPU bus.
To avoid to lock the CPU bus, we poll FMC2 ISR register. This register
reports the status of the R/B# signal.

Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Signed-off-by: Christophe Kerello <[email protected]>
Signed-off-by: Miquel Raynal <[email protected]>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

Pull HID fixes from Jiri Kosina:

 - fix for OOB in hiddev, from Dmitry Torokhov

 - _poll API fixes for hidraw, from Marcel Holtmann

 - functional fix for Steam driver, from Rodrigo Rivas Costa

 - a few new device IDs / device-specific quirks and other assorted
   smaller fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: steam: Fix input device disappearing
  HID: intel-ish-hid: ipc: Add Tiger Lake PCI device ID
  drivers/hid/hid-multitouch.c: fix a possible null pointer access.
  HID: wacom: Recognize new MobileStudio Pro PID
  HID: intel-ish-hid: ipc: add CMP device id
  HID: hiddev: fix mess in hiddev_open()
  HID: hid-input: clear unmapped usages
  HID: Add quirk for incorrect input length on Lenovo Y720
  HID: asus: Ignore Asus vendor-page usage-code 0xff events
  HID: ite: Add USB id match for Acer SW5-012 keyboard dock
  HID: Add quirk for Xin-Mo Dual Controller
  HID: Fix slab-out-of-bounds read in hid_field_extract
  HID: multitouch: Add LG MELF0410 I2C touchscreen support
  HID: uhid: Fix returning EPOLLOUT from uhid_char_poll
  HID: hidraw: Fix returning EPOLLOUT from hidraw_poll

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Missing netns pointer init in arp_tables, from Florian Westphal.

 2) Fix normal tcp SACK being treated as D-SACK, from Pengcheng Yang.

 3) Fix divide by zero in sch_cake, from Wen Yang.

 4) Len passed to skb_put_padto() is wrong in qrtr code, from Carl
    Huang.

 5) cmd->obj.chunk is leaked in sctp code error paths, from Xin Long.

 6) cgroup bpf programs can be released out of order, fix from Roman
    Gushchin.

 7) Make sure stmmac debugfs entry name is changed when device name
    changes, from Jiping Ma.

 8) Fix memory leak in vlan_dev_set_egress_priority(), from Eric
    Dumazet.

 9) SKB leak in lan78xx usb driver, also from Eric Dumazet.

10) Ridiculous TCA_FQ_QUANTUM values configured can cause loops in fq
    packet scheduler, reject them. From Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits)
  tipc: fix wrong connect() return code
  tipc: fix link overflow issue at socket shutdown
  netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present
  netfilter: conntrack: dccp, sctp: handle null timeout argument
  atm: eni: fix uninitialized variable warning
  macvlan: do not assume mac_header is set in macvlan_broadcast()
  net: sch_prio: When ungrafting, replace with FIFO
  mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO
  MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos
  gtp: fix bad unlock balance in gtp_encap_enable_socket
  pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM
  tipc: remove meaningless assignment in Makefile
  tipc: do not add socket.o to tipc-y twice
  net: stmmac: dwmac-sun8i: Allow all RGMII modes
  net: stmmac: dwmac-sunxi: Allow all RGMII modes
  net: usb: lan78xx: fix possible skb leak
  net: stmmac: Fixed link does not need MDIO Bus
  vlan: vlan_changelink() should propagate errors
  vlan: fix memory leak in vlan_dev_set_egress_priority
  stmmac: debugfs entry name is not be changed when udev rename device name.
  ...

e1000e: Revert "e1000e: Make watchdog use delayed work"

This reverts commit 59653e6497d16f7ac1d9db088f3959f57ee8c3db.

This is due to this commit causing driver crashes and connections to
reset unexpectedly.

Signed-off-by: Jeff Kirsher <[email protected]>
Tested-by: Aaron Brown <[email protected]>

i40e: Set PHY Access flag on X722

The X722 FW API version 1.9 adds support for accessing PHY
registers with Admin Queue Command. This enables reading
EEPROM data from (Q)SFP+ transceivers, what was previously
possible only on X710 devices.

Signed-off-by: Adam Ludkiewicz <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

iavf: remove current MAC address filter on VF reset

Currently MAC filters are not altered during a VF reset event. This may
lead to a stale filter when an administratively set MAC is forced by the
PF.

For an administratively set MAC the PF driver deletes the VFs filters,
overwrites the VFs MAC address and triggers a VF reset. However
the VF driver itself is not aware of the filter removal, which is what
the VF reset is for.
The VF reset queues all filters present in the VF driver to be re-added
to the PF filter list (including the filter for the now stale VF MAC
address) and triggers a VIRTCHNL_OP_GET_VF_RESOURCES event, which
provides the new MAC address to the VF.

When this happens i40e will complain and reject the stale MAC filter,
at least in the untrusted VF case.
i40e 0000:08:00.0: Setting MAC 3c:fa:fa:fa:fa:01 on VF 0
iavf 0000:08:02.0: Reset warning received from the PF
iavf 0000:08:02.0: Scheduling reset task
i40e 0000:08:00.0: Bring down and up the VF interface to make this change effective.
i40e 0000:08:00.0: VF attempting to override administratively set MAC address, bring down and up the VF interface to resume normal operation
i40e 0000:08:00.0: VF 0 failed opcode 10, retval: -1
iavf 0000:08:02.0: Failed to add MAC filter, error IAVF_ERR_NVM

To avoid re-adding the stale MAC filter it needs to be removed from the
VF driver's filter list before queuing the existing filters. Then during
the VIRTCHNL_OP_GET_VF_RESOURCES event the correct filter needs to be
added again, at which point the MAC address has been updated.

As a bonus this change makes bringing the VF down and up again
superfluous for the administratively set MAC case.

Signed-off-by: Stefan Assmann <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

igb: Fix SGMII SFP module discovery for 100FX/LX.

Changing the link mode should also be done for 100BaseFX SGMII modules,
otherwise they just don't work when the default link mode in CTRL_EXT
coming from the EEPROM is SERDES.

Additionally 100Base-LX SGMII SFP modules are also supported now, which
was not the case before.

Tested with an i210 using Flexoptix S.1303.2M.G 100FX and
S.1303.10.G 100LX SGMII SFP modules.

Signed-off-by: Manfred Rudigier <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

ixgbe: Fix calculation of queue with VFs and flow director on interface flap

This patch fixes the calculation of queue when we restore flow director
filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's
vf may be zero which makes the queue outside of the rx_ring array.

The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry().

Signed-off-by: Cambda Zhu <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

ixgbevf: Remove limit of 10 entries for unicast filter list

Currently, though the FDB entry is added to VF, it does not appear in
RAR filters. VF driver only allows to add 10 entries. Attempting to add
another causes an error. This patch removes limitation and allows use of
all free RAR entries for the FDB if needed.

Fixes: 46ec20ff7d ("ixgbevf: Add macvlan support in the set rx mode op")
Signed-off-by: Radoslaw Tyl <[email protected]>
Acked-by: Paul Menzel <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

i40e: Fix virtchnl_queue_select bitmap validation

Currently in i40e_vc_disable_queues_msg() we are incorrectly
validating the virtchnl queue select bitmaps. The
virtchnl_queue_select rx_queues and tx_queue bitmap is being
compared against ICE_MAX_VF_QUEUES, but the problem is that
these bitmaps can have a value greater than I40E_MAX_VF_QUEUES.
Fix this by comparing the bitmaps against BIT(I40E_MAX_VF_QUEUES).

Also, add the function i40e_vc_validate_vqs_bitmaps() that checks to see
if both virtchnl_queue_select bitmaps are empty along with checking that
the bitmaps only have valid bits set. This function can then be used in
both the queue enable and disable flows.

Suggested-by: Arkady Gilinksky <[email protected]>
Signed-off-by: Brett Creeley <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

time/posix-stubs: Provide compat itimer supoprt for alpha

Using compat_sys_getitimer and compat_sys_setitimer on alpha
causes a link failure in the Alpha tinyconfig and other configurations
that turn off CONFIG_POSIX_TIMERS.

Use the same #ifdef check for the stub version as well.

Fixes: 4c22ea2b9120 ("y2038: use compat_{get,set}_itimer on alpha")
Reported-by: Guenter Roeck <[email protected]>
Reported-by: kbuild test robot <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

cpu/SMT: Fix x86 link error without CONFIG_SYSFS

When CONFIG_SYSFS is disabled, but CONFIG_HOTPLUG_SMT is enabled,
the kernel fails to link:

arch/x86/power/cpu.o: In function `hibernate_resume_nonboot_cpu_disable':
(.text+0x38d): undefined reference to `cpuhp_smt_enable'
arch/x86/power/hibernate.o: In function `arch_resume_nosmt':
hibernate.c:(.text+0x291): undefined reference to `cpuhp_smt_enable'
hibernate.c:(.text+0x29c): undefined reference to `cpuhp_smt_disable'

Move the exported functions out of the #ifdef section into its
own with the correct conditions.

The patch that caused this is marked for stable backports, so
this one may need to be backported as well.

Fixes: ec527c318036 ("x86/power: Fix 'nosmt' vs hibernation triple fault during resume")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Jiri Kosina <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]

s390/setup: Fix secure ipl message

The new machine loader on z15 always creates an IPL Report block and
thus sets the IPL_PL_FLAG_IPLSR even when secure boot is disabled. This
causes the wrong message being printed at boot. Fix this by checking for
IPL_PL_FLAG_SIPL instead.

Fixes: 9641b8cc733f ("s390/ipl: read IPL report at early boot")
Signed-off-by: Philipp Rudo <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

s390/zcrypt: move ap device reset from bus to driver code

This patch moves the reset invocation of an ap device when
fresh detected from the ap bus to the probe() function of
the driver responsible for this device.

The virtualisation of ap devices makes it necessary to
remove unconditioned resets on fresh appearing apqn devices.
It may be that such a device is already enabled for guest
usage. So there may be a race condition between host ap bus
and guest ap bus doing the reset. This patch moves the
reset from the ap bus to the zcrypt drivers. So if there
is no zcrypt driver bound to an ap device - for example
the ap device is bound to the vfio device driver - the
ap device is untouched passed to the vfio device driver.

Signed-off-by: Harald Freudenberger <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

s390/zcrypt: Fix CCA cipher key gen with clear key value function

Regression tests showed that the CCA cipher key function which
generates an CCA cipher key with given clear key value does not work
correctly. At parsing the reply CPRB two limits are wrong calculated
resulting in rejecting the reply as invalid with s390dbf message
"_ip_cprb_helper reply with invalid or unknown key block".

Fixes: f2bbc96e7cfa ("s390/pkey: add CCA AES cipher key support")
Cc: Stable <[email protected]>
Signed-off-by: Harald Freudenberger <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>

drm/i915/gen9: Clear residual context state on context switch

Intel ID: PSIRT-TA-201910-001
CVEID: CVE-2019-14615

Intel GPU Hardware prior to Gen11 does not clear EU state
during a context switch. This can result in information
leakage between contexts.

For Gen8 and Gen9, hardware provides a mechanism for
fast cleardown of the EU state, by issuing a PIPE_CONTROL
with bit 27 set. We can use this in a context batch buffer
to explicitly cleardown the state on every context switch.

As this workaround is already in place for gen8, we can borrow
the code verbatim for Gen9.

Signed-off-by: Mika Kuoppala <[email protected]>
Signed-off-by: Akeem G Abodunrin <[email protected]>
Cc: Kumar Valsan Prathap <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Balestrieri Francesco <[email protected]>
Cc: Bloomfield Jon <[email protected]>
Cc: Dutt Sudeep <[email protected]>

fs: move guard_bio_eod() after bio_set_op_attrs

Commit 85a8ce62c2ea ("block: add bio_truncate to fix guard_bio_eod")
adds bio_truncate() for handling bio EOD. However, bio_truncate()
doesn't use the passed 'op' parameter from guard_bio_eod's callers.

So bio_trunacate() may retrieve wrong 'op', and zering pages may
not be done for READ bio.

Fixes this issue by moving guard_bio_eod() after bio_set_op_attrs()
in submit_bh_wbc() so that bio_truncate() can always retrieve correct
op info.

Meantime remove the 'op' parameter from guard_bio_eod() because it isn't
used any more.

Cc: Carlos Maiolino <[email protected]>
Cc: [email protected]
Fixes: 85a8ce62c2ea ("block: add bio_truncate to fix guard_bio_eod")
Signed-off-by: Ming Lei <[email protected]>
Fold in kerneldoc and bio_op() change.

Signed-off-by: Jens Axboe <[email protected]>

futex: Fix kernel-doc notation warning

Fix a kernel-doc warning in kernel/futex.c by adding notation
for @ret.

../kernel/futex.c:1187: warning: Function parameter or member 'ret' not described in 'wait_for_owner_exiting'

Fixes: 3ef240eaff36 ("futex: Prevent exit livelock")
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]

ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support

Turns out when introducing the eMMC version the gpmi node required for
NAND flash support got enabled exclusively on Colibri iMX7D 512MB.

Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support")
Signed-off-by: Marcel Ziswiler <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

ARM: dts: imx6sll-evk: Remove incorrect power supply assignment

The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.

Fixes: 96a9169cf621 ("ARM: dts: imx6sll-evk: Assign corresponding power supply for vdd3p0")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

ARM: dts: imx6sl-evk: Remove incorrect power supply assignment

The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.

Fixes: 3feea8805d6f ("ARM: dts: imx6sl-evk: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment

The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.

Fixes: 37a4bdead109 ("ARM: dts: imx6sx-sdb: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment

The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.

Fixes: 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

HID: steam: Fix input device disappearing

The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.

When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.

Signed-off-by: Rodrigo Rivas Costa <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL

The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on
the 1.5 version of the i.Core MX6 cpu module. The 1.5 version
differs from the original one for a few details, including the
ethernet PHY interface clock provider.

With this commit, the ethernet interface works properly:
SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver

While before using the 1.5 version, ethernet failed to startup
do to un-clocked PHY interface:
fec 2188000.ethernet eth0: could not attach to PHY

Similar fix has merged for i.Core MX6Q but missed to update for DL.

Fixes: a8039f2dd089 ("ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support")
Cc: Jacopo Mondi <[email protected]>
Signed-off-by: Michael Trimarchi <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Shawn Guo <[email protected]>

crypto: hisilicon/sec2 - Use atomics instead of __sync

The use of __sync functions for atomic memory access is not
supported in the kernel, and can result in a link error depending
on configuration:

ERROR: "__tsan_atomic32_compare_exchange_strong" [drivers/crypto/hisilicon/sec2/hisi_sec2.ko] undefined!
ERROR: "__tsan_atomic64_fetch_add" [drivers/crypto/hisilicon/sec2/hisi_sec2.ko] undefined!

Use the kernel's own atomic interfaces instead. This way the
debugfs interface actually reads the counter atomically.

Fixes: 416d82204df4 ("crypto: hisilicon - add HiSilicon SEC V2 driver")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>

Merge tag 'amd-drm-fixes-5.5-2020-01-08' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.5-2020-01-08:

amdgpu:
- Stability fix for raven
- Reduce pixel encoding to if max clock is exceeded on HDMI
  to allow additional high res modes

UAPI:
- enable DRIVER_SYNCOBJ_TIMELINE for amdgpu

Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

Merge tag 'drm-misc-fixes-2020-01-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

mst: Fix NO_STOP_BIT bit offset (Wayne)
sun4i: Fix RGB_DIV clock min divider on old hardware (Chen-Yu)
fb_helper: Fix bits_per_pixel param set behavior to round up (Geert)

Cc: Wayne Lin <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
From: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108205949.GA233273@art_vandelay

pstore/ram: Regularize prz label allocation lifetime

In my attempt to fix a memory leak, I introduced a double-free in the
pstore error path. Instead of trying to manage the allocation lifetime
between persistent_ram_new() and its callers, adjust the logic so
persistent_ram_new() always takes a kstrdup() copy, and leaves the
caller's allocation lifetime up to the caller. Therefore callers are
_always_ responsible for freeing their label. Before, it only needed
freeing when the prz itself failed to allocate, and not in any of the
other prz failure cases, which callers would have no visibility into,
which is the root design problem that lead to both the leak and now
double-free bugs.

Reported-by: Cengiz Can <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Fixes: 8df955a32a73 ("pstore/ram: Fix error-path memory leak in persistent_ram_new() callers")
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>

tipc: fix wrong connect() return code

The current 'tipc_wait_for_connect()' function does a wait-loop for the
condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket
connecting has done. However, when the condition is met, it returns '0'
even in the case the connecting is actually failed, the socket state is
set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..).
This results in a wrong return code for the 'connect()' call from user,
making it believe that the connection is established and go ahead with
building, sending a message, etc. but finally failed e.g. '-EPIPE'.

This commit fixes the issue by changing the wait condition to the
'tipc_sk_connected(sk)', so the function will return '0' only when the
connection is really established. Otherwise, either the socket 'sk_err'
if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly.

Acked-by: Ying Xue <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Tuong Lien <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

tipc: fix link overflow issue at socket shutdown

When a socket is suddenly shutdown or released, it will reject all the
unreceived messages in its receive queue. This applies to a connected
socket too, whereas there is only one 'FIN' message required to be sent
back to its peer in this case.

In case there are many messages in the queue and/or some connections
with such messages are shutdown at the same time, the link layer will
easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level
because of the message rejections. As a result, the link will be taken
down. Moreover, immediately when the link is re-established, the socket
layer can continue to reject the messages and the same issue happens...

The commit refactors the '__tipc_shutdown()' function to only send one
'FIN' in the situation mentioned above. For the connectionless case, it
is unavoidable but usually there is no rejections for such socket
messages because they are 'dest-droppable' by default.

In addition, the new code makes the other socket states clear
(e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving.

Acked-by: Ying Xue <[email protected]>
Acked-by: Jon Maloy <[email protected]>
Signed-off-by: Tuong Lien <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Missing netns context in arp_tables, from Florian Westphal.

2) Underflow in flowtable reference counter, from wenxu.

3) Fix incorrect ethernet destination address in flowtable offload,
   from wenxu.

4) Check for status of neighbour entry, from wenxu.

5) Fix NAT port mangling, from wenxu.

6) Unbind callbacks from destroy path to cleanup hardware properly
   on flowtable removal.

7) Fix missing casting statistics timestamp, add nf_flowtable_time_stamp
   and use it.

8) NULL pointer exception when timeout argument is null in conntrack
   dccp and sctp protocol helpers, from Florian Westphal.

9) Possible nul-dereference in ipset with IPSET_ATTR_LINENO, also from
   Florian.
====================

Signed-off-by: David S. Miller <[email protected]>

netfilter: ipset: avoid null deref when IPSET_ATTR_LINENO is present

The set uadt functions assume lineno is never NULL, but it is in
case of ip_set_utest().

syzkaller managed to generate a netlink message that calls this with
LINENO attr present:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:hash_mac4_uadt+0x1bc/0x470 net/netfilter/ipset/ip_set_hash_mac.c:104
Call Trace:
 ip_set_utest+0x55b/0x890 net/netfilter/ipset/ip_set_core.c:1867
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 nfnetlink_rcv+0x1ba/0x460 net/netfilter/nfnetlink.c:563

pass a dummy lineno storage, its easier than patching all set
implementations.

This seems to be a day-0 bug.

Cc: Jozsef Kadlecsik <[email protected]>
Reported-by: [email protected]
Fixes: a7b4f989a6294 ("netfilter: ipset: IP set core support")
Signed-off-by: Florian Westphal <[email protected]>
Acked-by: Jozsef Kadlecsik <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

netfilter: conntrack: dccp, sctp: handle null timeout argument

The timeout pointer can be NULL which means we should modify the
per-nets timeout instead.

All do this, except sctp and dccp which instead give:

general protection fault: 0000 [#1] PREEMPT SMP KASAN
net/netfilter/nf_conntrack_proto_dccp.c:682
 ctnl_timeout_parse_policy+0x150/0x1d0 net/netfilter/nfnetlink_cttimeout.c:67
 cttimeout_default_set+0x150/0x1c0 net/netfilter/nfnetlink_cttimeout.c:368
 nfnetlink_rcv_msg+0xcf2/0xfb0 net/netfilter/nfnetlink.c:229
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477

Reported-by: [email protected]
Fixes: c779e849608a8 ("netfilter: conntrack: remove get_timeout() indirection")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>

atm: eni: fix uninitialized variable warning

With -O3, gcc has found an actual unintialized variable stored
into an mmio register in two instances:

drivers/atm/eni.c: In function 'discard':
drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized]
   writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4);
             ^
drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized]

Change the code to always write zeroes instead.

Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

macvlan: do not assume mac_header is set in macvlan_broadcast()

Use of eth_hdr() in tx path is error prone.

Many drivers call skb_reset_mac_header() before using it,
but others do not.

Commit 6d1ccff62780 ("net: reset mac header in dev_start_xmit()")
attempted to fix this generically, but commit d346a3fae3ff
("packet: introduce PACKET_QDISC_BYPASS socket option") brought
back the macvlan bug.

Lets add a new helper, so that tx paths no longer have
to call skb_reset_mac_header() only to get a pointer
to skb->data.

Hopefully we will be able to revert 6d1ccff62780
("net: reset mac header in dev_start_xmit()") and save few cycles
in transmit fast path.

BUG: KASAN: use-after-free in __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
BUG: KASAN: use-after-free in mc_hash drivers/net/macvlan.c:251 [inline]
BUG: KASAN: use-after-free in macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
Read of size 4 at addr ffff8880a4932401 by task syz-executor947/9579

CPU: 0 PID: 9579 Comm: syz-executor947 Not tainted 5.5.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374
 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506
 kasan_report+0x12/0x20 mm/kasan/common.c:639
 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/generic_report.c:145
 __get_unaligned_cpu32 include/linux/unaligned/packed_struct.h:19 [inline]
 mc_hash drivers/net/macvlan.c:251 [inline]
 macvlan_broadcast+0x547/0x620 drivers/net/macvlan.c:277
 macvlan_queue_xmit drivers/net/macvlan.c:520 [inline]
 macvlan_start_xmit+0x402/0x77f drivers/net/macvlan.c:559
 __netdev_start_xmit include/linux/netdevice.h:4447 [inline]
 netdev_start_xmit include/linux/netdevice.h:4461 [inline]
 dev_direct_xmit+0x419/0x630 net/core/dev.c:4079
 packet_direct_xmit+0x1a9/0x250 net/packet/af_packet.c:240
 packet_snd net/packet/af_packet.c:2966 [inline]
 packet_sendmsg+0x260d/0x6220 net/packet/af_packet.c:2991
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:659
 __sys_sendto+0x262/0x380 net/socket.c:1985
 __do_sys_sendto net/socket.c:1997 [inline]
 __se_sys_sendto net/socket.c:1993 [inline]
 __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1993
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x442639
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffc13549e08 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000442639
RDX: 000000000000000e RSI: 0000000020000080 RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000403bb0 R14: 0000000000000000 R15: 0000000000000000

Allocated by task 9389:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 __kasan_kmalloc mm/kasan/common.c:513 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:527
 __do_kmalloc mm/slab.c:3656 [inline]
 __kmalloc+0x163/0x770 mm/slab.c:3665
 kmalloc include/linux/slab.h:561 [inline]
 tomoyo_realpath_from_path+0xc5/0x660 security/tomoyo/realpath.c:252
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
 security_inode_getattr+0xf2/0x150 security/security.c:1222
 vfs_getattr+0x25/0x70 fs/stat.c:115
 vfs_statx_fd+0x71/0xc0 fs/stat.c:145
 vfs_fstat include/linux/fs.h:3265 [inline]
 __do_sys_newfstat+0x9b/0x120 fs/stat.c:378
 __se_sys_newfstat fs/stat.c:375 [inline]
 __x64_sys_newfstat+0x54/0x80 fs/stat.c:375
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 9389:
 save_stack+0x23/0x90 mm/kasan/common.c:72
 set_track mm/kasan/common.c:80 [inline]
 kasan_set_free_info mm/kasan/common.c:335 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x10a/0x2c0 mm/slab.c:3757
 tomoyo_realpath_from_path+0x1a7/0x660 security/tomoyo/realpath.c:289
 tomoyo_get_realpath security/tomoyo/file.c:151 [inline]
 tomoyo_path_perm+0x230/0x430 security/tomoyo/file.c:822
 tomoyo_inode_getattr+0x1d/0x30 security/tomoyo/tomoyo.c:129
 security_inode_getattr+0xf2/0x150 security/security.c:1222
 vfs_getattr+0x25/0x70 fs/stat.c:115
 vfs_statx_fd+0x71/0xc0 fs/stat.c:145
 vfs_fstat include/linux/fs.h:3265 [inline]
 __do_sys_newfstat+0x9b/0x120 fs/stat.c:378
 __se_sys_newfstat fs/stat.c:375 [inline]
 __x64_sys_newfstat+0x54/0x80 fs/stat.c:375
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8880a4932000
 which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 1025 bytes inside of
 4096-byte region [ffff8880a4932000, ffff8880a4933000)
The buggy address belongs to the page:
page:ffffea0002924c80 refcount:1 mapcount:0 mapping:ffff8880aa402000 index:0x0 compound_mapcount: 0
raw: 00fffe0000010200 ffffea0002846208 ffffea00028f3888 ffff8880aa402000
raw: 0000000000000000 ffff8880a4932000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880a4932300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880a4932380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8880a4932400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                   ^
 ffff8880a4932480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8880a4932500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: b863ceb7ddce ("[NET]: Add macvlan driver")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Merge branch 'net-ungraft-prio'

Petr Machata says:

====================
When ungrafting from PRIO, replace child with FIFO

When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.

In patch #2, this problem is fixed for PRIO by first attempting to create a
default Qdisc and only falling back to noop when that fails. This pattern
of attempting to create an invisible FIFO, using NOOP only as a fallback,
is also seen in some other Qdiscs.

The only driver currently offloading PRIO (and thus presumably the only one
impacted by this) is mlxsw. Therefore patch #1 extends mlxsw to handle the
replacement by an invisible FIFO gracefully.
====================

Signed-off-by: David S. Miller <[email protected]>

net: sch_prio: When ungrafting, replace with FIFO

When a child Qdisc is removed from one of the PRIO Qdisc's bands, it is
replaced unconditionally by a NOOP qdisc. As a result, any traffic hitting
that band gets dropped. That is incorrect--no Qdisc was explicitly added
when PRIO was created, and after removal, none should have to be added
either.

Fix PRIO by first attempting to create a default Qdisc and only falling
back to noop when that fails. This pattern of attempting to create an
invisible FIFO, using NOOP only as a fallback, is also seen in other
Qdiscs.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Petr Machata <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO

The following patch will change PRIO to replace a removed Qdisc with an
invisible FIFO, instead of NOOP. mlxsw will see this replacement due to the
graft message that is generated. But because FIFO does not issue its own
REPLACE message, when the graft operation takes place, the Qdisc that mlxsw
tracks under the indicated band is still the old one. The child
handle (0:0) therefore does not match, and mlxsw rejects the graft
operation, which leads to an extack message:

    Warning: Offloading graft operation failed.

Fix by ignoring the invisible children in the PRIO graft handler. The
DESTROY message of the removed Qdisc is going to follow shortly and handle
the removal.

Fixes: 32dc5efc6cb4 ("mlxsw: spectrum: qdiscs: prio: Handle graft command")
Signed-off-by: Petr Machata <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

MAINTAINERS: Remove myself as co-maintainer for qcom-ethqos

As I am no longer with Linaro, I no longer have access to documentation
for this IP. The Linaro email will start bouncing soon.

Vinod is fully capable to maintain this driver by himself, therefore
remove myself as co-maintainer for qcom-ethqos.

Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

gtp: fix bad unlock balance in gtp_encap_enable_socket

WARNING: bad unlock balance detected!
5.5.0-rc5-syzkaller #0 Not tainted
-------------------------------------
syz-executor921/9688 is trying to release lock (sk_lock-AF_INET6) at:
[<ffffffff84bf8506>] gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
but there are no more locks to release!

other info that might help us debug this:
2 locks held by syz-executor921/9688:
 #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:72 [inline]
 #0: ffffffff8a4d8840 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x405/0xaf0 net/core/rtnetlink.c:5421
 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: spin_lock_bh include/linux/spinlock.h:343 [inline]
 #1: ffff88809304b560 (slock-AF_INET6){+...}, at: release_sock+0x20/0x1c0 net/core/sock.c:2951

stack backtrace:
CPU: 0 PID: 9688 Comm: syz-executor921 Not tainted 5.5.0-rc5-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x197/0x210 lib/dump_stack.c:118
 print_unlock_imbalance_bug kernel/locking/lockdep.c:4008 [inline]
 print_unlock_imbalance_bug.cold+0x114/0x123 kernel/locking/lockdep.c:3984
 __lock_release kernel/locking/lockdep.c:4242 [inline]
 lock_release+0x5f2/0x960 kernel/locking/lockdep.c:4503
 sock_release_ownership include/net/sock.h:1496 [inline]
 release_sock+0x17c/0x1c0 net/core/sock.c:2961
 gtp_encap_enable_socket+0x146/0x400 drivers/net/gtp.c:830
 gtp_encap_enable drivers/net/gtp.c:852 [inline]
 gtp_newlink+0x9fc/0xc60 drivers/net/gtp.c:666
 __rtnl_newlink+0x109e/0x1790 net/core/rtnetlink.c:3305
 rtnl_newlink+0x69/0xa0 net/core/rtnetlink.c:3363
 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:639 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:659
 ____sys_sendmsg+0x753/0x880 net/socket.c:2330
 ___sys_sendmsg+0x100/0x170 net/socket.c:2384
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417
 __do_sys_sendmsg net/socket.c:2426 [inline]
 __se_sys_sendmsg net/socket.c:2424 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424
 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x445d49
Code: e8 bc b7 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f8019074db8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006dac38 RCX: 0000000000445d49
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00000000006dac30 R08: 0000000000000004 R09: 0000000000000000
R10: 0000000000000008 R11: 0000000000000246 R12: 00000000006dac3c
R13: 00007ffea687f6bf R14: 00007f80190759c0 R15: 20c49ba5e353f7cf

Fixes: e198987e7dd7 ("gtp: fix suspicious RCU usage")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Taehee Yoo <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM

As diagnosed by Florian :

If TCA_FQ_QUANTUM is set to 0x80000000, fq_deueue()
can loop forever in :

if (f->credit <= 0) {
  f->credit += q->quantum;
  goto begin;
}

... because f->credit is either 0 or -2147483648.

Let's limit TCA_FQ_QUANTUM to no more than 1 << 20 :
This max value should limit risks of breaking user setups
while fixing this bug.

Fixes: afe4fd062416 ("pkt_sched: fq: Fair Queue packet scheduler")
Signed-off-by: Eric Dumazet <[email protected]>
Diagnosed-by: Florian Westphal <[email protected]>
Reported-by: [email protected]
Signed-off-by: David S. Miller <[email protected]>

tipc: remove meaningless assignment in Makefile

There is no module named tipc_diag.

The assignment to tipc_diag-y has no effect.

Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

tipc: do not add socket.o to tipc-y twice

net/tipc/Makefile adds socket.o twice.

tipc-y += addr.o bcast.o bearer.o \
           core.o link.o discover.o msg.o  \
           name_distr.o  subscr.o monitor.o name_table.o net.o  \
           netlink.o netlink_compat.o node.o socket.o eth_media.o \
                                             ^^^^^^^^
           topsrv.o socket.o group.o trace.o
                    ^^^^^^^^

Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: stmmac: dwmac-sun8i: Allow all RGMII modes

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: stmmac: dwmac-sunxi: Allow all RGMII modes

Allow all the RGMII modes to be used. This would allow us to represent
the hardware better in the device tree with RGMII_ID where in most
cases the PHY's internal delay for both RX and TX are used.

Fixes: af0bd4e9ba80 ("net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

ALSA: hda: enable regmap internal locking

This reverts commit 42ec336f1f9d ("ALSA: hda: Disable regmap
internal locking").

Without regmap locking, there is a race between snd_hda_codec_amp_init()
and PM callbacks issuing regcache_sync(). This was caught by
following kernel warning trace:

<4> [358.080081] WARNING: CPU: 2 PID: 4157 at drivers/base/regmap/regcache.c:498 regcache_cache_only+0xf5/0x130
[...]
<4> [358.080148] Call Trace:
<4> [358.080158]  snd_hda_codec_amp_init+0x4e/0x100 [snd_hda_codec]
<4> [358.080169]  snd_hda_codec_amp_init_stereo+0x40/0x80 [snd_hda_codec]

Suggested-by: Takashi Iwai <[email protected]>
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/592
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>

Merge tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/fixes

ASPEED device tree fixes for 5.5

Fixes for some badly applied patches that went in to 5.5. There is also
a fix for an incorrect i2c address.

* tag 'aspeed-5.5-devicetree-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: rainier: Fix fan fault and presence
  ARM: dts: aspeed: rainier: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Remove duplicate flash nodes
  ARM: dts: aspeed: tacoma: Remove duplicate i2c busses
  ARM: dts: aspeed: tacoma: Fix fsi master node
  ARM: dts: aspeed-g6: Fix FSI master location

Link: https://lore.kernel.org/r/CACPK8XcjazgORXNZBU1ECMukXG4HA8D9VeDxiSPifDk_iB7_dw@mail.gmail.com
Signed-off-by: Olof Johansson <[email protected]>

ARM: omap2plus: select RESET_CONTROLLER

With the new omap_prm driver added unconditionally, omap2 builds
fail when the reset controller subsystem is disabled:

drivers/soc/ti/omap_prm.o: In function `omap_prm_probe':
omap_prm.c:(.text+0x2d4): undefined reference to `devm_reset_controller_register'

Link: https://lore.kernel.org/r/[email protected]
Fixes: 3e99cb214f03 ("soc: ti: add initial PRM driver with reset control support")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Tony Lindgren <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>

ARM: davinci: select CONFIG_RESET_CONTROLLER

Selecting RESET_CONTROLLER is actually required, otherwise we
can get a link failure in the clock driver:

drivers/clk/davinci/psc.o: In function `__davinci_psc_register_clocks':
psc.c:(.text+0x9a0): undefined reference to `devm_reset_controller_register'
drivers/clk/davinci/psc-da850.o: In function `da850_psc0_init':
psc-da850.c:(.text+0x24): undefined reference to `reset_controller_add_lookup'

Link: https://lore.kernel.org/r/[email protected]
Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5")
Cc: <[email protected]> # v5.4
Signed-off-by: Arnd Bergmann <[email protected]>
Reviewed-by: Bartosz Golaszewski <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Acked-by: Sekhar Nori <[email protected]>
Signed-off-by: Olof Johansson <[email protected]>

Merge tag 'tpmdd-next-20200108' of git://git.infradead.org/users/jjs/linux-tpmdd

Pull more tpmd fixes from Jarkko Sakkinen:
 "One critical regression fix (the faulty commit got merged in rc3, but
  also marked for stable)"

* tag 'tpmdd-next-20200108' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: Handle negative priv->response_len in tpm_common_read()

btrfs: fix memory leak in qgroup accounting

When running xfstests on the current btrfs I get the following splat from
kmemleak:

unreferenced object 0xffff88821b2404e0 (size 32):
  comm "kworker/u4:7", pid 26663, jiffies 4295283698 (age 8.776s)
  hex dump (first 32 bytes):
    01 00 00 00 00 00 00 00 10 ff fd 26 82 88 ff ff  ...........&....
    10 ff fd 26 82 88 ff ff 20 ff fd 26 82 88 ff ff  ...&.... ..&....
  backtrace:
    [<00000000f94fd43f>] ulist_alloc+0x25/0x60 [btrfs]
    [<00000000fd023d99>] btrfs_find_all_roots_safe+0x41/0x100 [btrfs]
    [<000000008f17bd32>] btrfs_find_all_roots+0x52/0x70 [btrfs]
    [<00000000b7660afb>] btrfs_qgroup_rescan_worker+0x343/0x680 [btrfs]
    [<0000000058e66778>] btrfs_work_helper+0xac/0x1e0 [btrfs]
    [<00000000f0188930>] process_one_work+0x1cf/0x350
    [<00000000af5f2f8e>] worker_thread+0x28/0x3c0
    [<00000000b55a1add>] kthread+0x109/0x120
    [<00000000f88cbd17>] ret_from_fork+0x35/0x40

This corresponds to:

  (gdb) l *(btrfs_find_all_roots_safe+0x41)
  0x8d7e1 is in btrfs_find_all_roots_safe (fs/btrfs/backref.c:1413).
  1408
  1409            tmp = ulist_alloc(GFP_NOFS);
  1410            if (!tmp)
  1411                    return -ENOMEM;
  1412            *roots = ulist_alloc(GFP_NOFS);
  1413            if (!*roots) {
  1414                    ulist_free(tmp);
  1415                    return -ENOMEM;
  1416            }
  1417

Following the lifetime of the allocated 'roots' ulist, it gets freed
again in btrfs_qgroup_account_extent().

But this does not happen if the function is called with the
'BTRFS_FS_QUOTA_ENABLED' flag cleared, then btrfs_qgroup_account_extent()
does a short leave and directly returns.

Instead of directly returning we should jump to the 'out_free' in order to
free all resources as expected.

CC: [email protected] # 4.14+
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Johannes Thumshirn <[email protected]>
[ add comment ]
Signed-off-by: David Sterba <[email protected]>

usb: missing parentheses in USE_NEW_SCHEME

According to bd0e6c9614b9 ("usb: hub: try old enumeration scheme first
for high speed devices") the kernel will try the old enumeration scheme
first for high speed devices.  This can happen when a high speed device
is plugged in.

But due to missing parentheses in the USE_NEW_SCHEME define, this logic
can get messed up and the incorrect result happens.

Acked-by: Alan Stern <[email protected]>
Signed-off-by: Qi Zhou <[email protected]>
Link: https://lore.kernel.org/r/ht4mtag8ZP-HKEhD0KkJhcFnVlOFV8N8eNjJVRD9pDkkLUNhmEo8_cL_sl7xy9mdajdH-T8J3TFQsjvoYQT61NFjQXy469Ed_BbBw_x4S1E=@protonmail.com
[ fixup changelog text - gregkh]
Cc: stable <[email protected]>
Fixes: bd0e6c9614b9 ("usb: hub: try old enumeration scheme first for high speed devices")
Signed-off-by: Greg Kroah-Hartman <[email protected]>

usb: ohci-da8xx: ensure error return on variable error is set

Currently when an error occurs when calling devm_gpiod_get_optional or
calling gpiod_to_irq it causes an uninitialized error return in variable
'error' to be returned.  Fix this by ensuring the error variable is set
from da8xx_ohci->oc_gpio and oc_irq.

Thanks to Dan Carpenter for spotting the uninitialized error in the
gpiod_to_irq failure case.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: d193abf1c913 ("usb: ohci-da8xx: add vbus and overcurrent gpios")
Signed-off-by: Colin Ian King <[email protected]>
Cc: stable <[email protected]>
Acked-by: Alan Stern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

usb: musb: Disable pullup at init

The pullup may be already enabled before the driver is initialized. This
happens for instance on JZ4740.

It has to be disabled at init time, as we cannot guarantee that a gadget
driver will be bound to the UDC.

Signed-off-by: Paul Cercueil <[email protected]>
Suggested-by: Bin Liu <[email protected]>
Cc: [email protected]
Signed-off-by: Bin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

usb: musb: fix idling for suspend after disconnect interrupt

When disconnected as USB B-device, suspend interrupt should come before
diconnect interrupt, because the DP/DM pins are shorter than the
VBUS/GND pins on the USB connectors. But we sometimes get a suspend
interrupt after disconnect interrupt. In that case we have devctl set to
99 with VBUS still valid and musb_pm_runtime_check_session() wrongly
thinks we have an active session. We have no other interrupts after
disconnect coming in this case at least with the omap2430 glue.

Let's fix the issue by checking the interrupt status again with
delayed work for the devctl 99 case. In the suspend after disconnect
case the devctl session bit has cleared by then and musb can idle.
For a typical USB B-device connect case we just continue with normal
interrupts.

Fixes: 467d5c980709 ("usb: musb: Implement session bit based runtime PM for musb-core")
Cc: Merlijn Wajer <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Sebastian Reichel <[email protected]>
Cc: [email protected]
Signed-off-by: Tony Lindgren <[email protected]>
Signed-off-by: Bin Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

usb: typec: ucsi: Fix the notification bit offsets

The bit offsets for the Set Notification Enable command were
not considering the reserved bits in the middle.

Fixes: 470ce43a1a81 ("usb: typec: ucsi: Remove struct ucsi_control")
Signed-off-by: Heikki Krogerus <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

tpm: Handle negative priv->response_len in tpm_common_read()

The priv->response_length can hold the size of an response or an negative
error code, and the tpm_common_read() needs to handle both cases correctly.
Changed the type of response_length to signed and accounted for negative
value in tpm_common_read().

Cc: [email protected]
Fixes: d23d12484307 ("tpm: fix invalid locking in NONBLOCKING mode")
Reported-by: Laura Abbott <[email protected]>
Signed-off-by: Tadeusz Struk <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Jarkko Sakkinen <[email protected]>

btrfs: do not delete mismatched root refs

btrfs_del_root_ref() will simply WARN_ON() if the ref doesn't match in
any way, and then continue to delete the reference.  This shouldn't
happen, we have these values because there's more to the reference than
the original root and the sub root.  If any of these checks fail, return
-ENOENT.

CC: [email protected] # 4.4+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>

btrfs: fix invalid removal of root ref

If we have the following sequence of events

  btrfs sub create A
  btrfs sub create A/B
  btrfs sub snap A C
  mkdir C/foo
  mv A/B C/foo
  rm -rf *

We will end up with a transaction abort.

The reason for this is because we create a root ref for B pointing to A.
When we create a snapshot of C we still have B in our tree, but because
the root ref points to A and not C we will make it appear to be empty.

The problem happens when we move B into C.  This removes the root ref
for B pointing to A and adds a ref of B pointing to C.  When we rmdir C
we'll see that we have a ref to our root and remove the root ref,
despite not actually matching our reference name.

Now btrfs_del_root_ref() allowing this to work is a bug as well, however
we know that this inode does not actually point to a root ref in the
first place, so we shouldn't be calling btrfs_del_root_ref() in the
first place and instead simply look up our dir index for this item and
do the rest of the removal.

CC: [email protected] # 4.4+
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>

btrfs: rework arguments of btrfs_unlink_subvol

btrfs_unlink_subvol takes the name of the dentry and the root objectid
based on what kind of inode this is, either a real subvolume link or a
empty one that we inherited as a snapshot.  We need to fix how we unlink
in the case for BTRFS_EMPTY_SUBVOL_DIR_OBJECTID in the future, so rework
btrfs_unlink_subvol to just take the dentry and handle getting the right
objectid given the type of inode this is.  There is no functional change
here, simply pushing the work into btrfs_unlink_subvol() proper.

Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>

ALSA: hda/realtek - Add quirk for the bass speaker on Lenovo Yoga X1 7th gen

Add quirk to ALC285_FIXUP_SPEAKER2_TO_DAC1, which is the same fixup
applied for X1 Carbon 7th gen in commit d2cd795c4ece ("ALSA: hda -
fixup for the bass speaker on Lenovo Carbon X1 7th gen").

Signed-off-by: Kailang Yang <[email protected]>
Reviewed-by: Jaroslav Kysela <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

ALSA: hda/realtek - Set EAPD control to default for ALC222

Set EAPD control to verb control.

Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>

ARM: dts: aspeed: rainier: Fix fan fault and presence

The PCA9552 used for fan fault and presence information is at address
61h, not 60h.

Fixes: 2efc118ce3c3 ("ARM: dts: aspeed: rainier: Add i2c devices")
Signed-off-by: Brandon Wyman <[email protected]>
Reviewed-by: Eddie James <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>

ARM: dts: aspeed: rainier: Remove duplicate i2c busses

This is a revert of "ARM: dts: aspeed: rainier: Add i2c devices", which
was already applied to the tree.

Fixes: 9c44db7096e0 ("ARM: dts: aspeed: rainier: Add i2c devices")
Reviewed-by: Jim Wright <[email protected]>
Tested-by: Jim Wright <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>

ARM: dts: aspeed: tacoma: Remove duplicate flash nodes

This is a revert of "ARM: dts: aspeed: tacoma: Enable FMC and SPI
devices" which was already applied as part of "ARM: dts: aspeed: Add
Tacoma machine".

Fixes: 8737481e381c ("ARM: dts: aspeed: tacoma: Enable FMC and SPI devices")
Reviewed-by: Andrew Jeffery <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>

ARM: dts: aspeed: tacoma: Remove duplicate i2c busses

This is a revert of "ARM: dts: aspeed: tacoma: Enable I2C busses", which
was already applied as part of "ARM: dts: aspeed: Add Tacoma machine".

Fixes: 606bcdde6724 ("ARM: dts: aspeed: tacoma: Enable I2C busses")
Reviewed-by: Andrew Jeffery <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>

ARM: dts: aspeed: tacoma: Fix fsi master node

This was broken when applying "ARM: dts: aspeed: tacoma: Add
host FSI description".

Fixes: a981c93300ef ("ARM: dts: aspeed: tacoma: Add host FSI description")
Acked-by: Andrew Jeffery <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>

ARM: dts: aspeed-g6: Fix FSI master location

The FIS nodes were placed incorrectly in the device tree.

Fixes: 0fe4e304782c ("ARM: dts: aspeed-g6: Describe FSI masters")
Reviewed-by: Andrew Jeffery <[email protected]>
Signed-off-by: Joel Stanley <[email protected]>

ASoC: Fix NULL dereference at freeing

When an ASoC driver with pcm_destruct component ops is freed before
the PCM object instantiation (e.g. deferring the probe), it hits an
Oops at snd_soc_pcm_component_free() that calls the pcm_destruct ops
unconditionally.

Fix it by adding a NULL-check of rtd->pcm before calling callbacks.

Fixes: c64bfc906600 ("ASoC: soc-core: add new pcm_construct/pcm_destruct")
Reported-by: Matthias Brugger <[email protected]>
Tested-by: Ben Ho <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

net: usb: lan78xx: fix possible skb leak

If skb_linearize() fails, we need to free the skb.

TSO makes skb bigger, and this bug might be the reason
Raspberry Pi 3B+ users had to disable TSO.

Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: RENARD Pierre-Francois <[email protected]>
Cc: Stefan Wahren <[email protected]>
Cc: Woojung Huh <[email protected]>
Cc: Microchip Linux Driver Support <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

net: stmmac: Fixed link does not need MDIO Bus

When using fixed link we don't need the MDIO bus support.

Reported-by: Heiko Stuebner <[email protected]>
Reported-by: kernelci.org bot <[email protected]>
Fixes: d3e014ec7d5e ("net: stmmac: platform: Fix MDIO init for platforms without PHY")
Signed-off-by: Jose Abreu <[email protected]>
Acked-by: Sriram Dash <[email protected]>
Tested-by: Patrice Chotard <[email protected]>
Tested-by: Heiko Stuebner <[email protected]>
Acked-by: Neil Armstrong <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Tested-by: Florian Fainelli <f.fainelli@gmail> # Lamobo R1 (fixed-link + MDIO sub node for roboswitch).
Signed-off-by: David S. Miller <[email protected]>