platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
p2sb_bar() unhides P2SB device to get resources from the device. It
guards the operation by locking pci_rescan_remove_lock so that parallel
rescans do not find the P2SB device. However, this lock causes deadlock
when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan
locks pci_rescan_remove_lock and probes PCI devices. When PCI devices
call p2sb_bar() during probe, it locks pci_rescan_remove_lock again.
Hence the deadlock.
To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar().
Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources()
for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(),
refer the cache and return to the caller.
platform/x86/amd/pmc: Disable keyboard wakeup on AMD Framework 13
The Laptop 13 (AMD Ryzen 7040Series) BIOS 03.03 has a workaround
included in the EC firmware that will cause the EC to emit a "spurious"
keypress during the resume from s0i3 [1].
This series of keypress events can be observed in the kernel log on
resume.
```
atkbd serio0: Unknown key pressed (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x6b on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 6b <keycode>' to make it known.
```
In some user flows this is harmless, but if a user has specifically
suspended the laptop and then closed the lid it will cause the laptop
to wakeup. The laptop wakes up because the ACPI SCI triggers when
the lid is closed and when the kernel sees that IRQ1 is "also" active.
The kernel can't distinguish from a real keyboard keypress and wakes the
system.
Add the model into the list of quirks to disable keyboard wakeup source.
This is intentionally only matching the production BIOS version in hopes
that a newer EC firmware included in a newer BIOS can avoid this behavior.
platform/x86/amd/pmc: Move keyboard wakeup disablement detection to pmc-quirks
Other platforms may need to disable keyboard wakeup besides Cezanne,
so move the detection into amd_pmc_quirks_init() where it may be applied
to multiple platforms.
platform/x86/amd/pmc: Only run IRQ1 firmware version check on Cezanne
amd_pmc_wa_czn_irq1() only runs on Cezanne platforms currently but
may be extended to other platforms in the future. Rename the function
and only check platform firmware version when it's called for a Cezanne
based platform.
Rajvi Jingar [Sat, 16 Dec 2023 01:16:50 +0000 (17:16 -0800)]
platform/x86/intel/pmc: Fix hang in pmc_core_send_ltr_ignore()
For input value 0, PMC stays unassigned which causes crash while trying
to access PMC for register read/write. Include LTR index 0 in pmc_index
and ltr_index calculation.
Vishnu Sankar [Thu, 14 Dec 2023 13:47:02 +0000 (22:47 +0900)]
platform/x86: thinkpad_acpi: fix for incorrect fan reporting on some ThinkPad systems
Some ThinkPad systems ECFW use non-standard addresses for fan control
and reporting. This patch adds support for such ECFW so that it can report
the correct fan values.
Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2.
Fix kernel-doc function notation and comment formatting to prevent
warnings from scripts/kernel-doc.
for drivers/platform/x86/intel_ips.c:
595: warning: No description found for return value of 'mcp_exceeded'
624: warning: No description found for return value of 'cpu_exceeded'
650: warning: No description found for return value of 'mch_exceeded'
745: warning: bad line: cpu+ gpu+ cpu+gpu- cpu-gpu+ cpu-gpu-
746: warning: bad line: cpu < gpu < cpu+gpu+ cpu+ gpu+ nothing
753: warning: No description found for return value of 'ips_adjust'
747: warning: bad line: cpu < gpu >= cpu+gpu-(mcp<) cpu+gpu-(mcp<) gpu- gpu-
748: warning: bad line: cpu >= gpu < cpu-gpu+(mcp<) cpu- cpu-gpu+(mcp<) cpu-
749: warning: bad line: cpu >= gpu >= cpu-gpu- cpu-gpu- cpu-gpu- cpu-gpu-
945: warning: No description found for return value of 'ips_monitor'
1151: warning: No description found for return value of 'ips_irq_handler'
1301: warning: Function parameter or member 'ips' not described in 'ips_detect_cpu'
1302: warning: No description found for return value of 'ips_detect_cpu'
1358: warning: No description found for return value of 'ips_get_i915_syms'
Add a function's return description and don't misuse "/**" for
non-kernel-doc comments to prevent warnings from scripts/kernel-doc.
thinkpad_acpi.c:523: warning: No description found for return value of 'tpacpi_check_quirks'
thinkpad_acpi.c:9307: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
thinkpad_acpi.c:9307: warning: missing initial short description on line:
* This evaluates a ACPI method call specific to the battery
David Thompson [Thu, 30 Nov 2023 18:35:15 +0000 (13:35 -0500)]
mlxbf-bootctl: correctly identify secure boot with development keys
The secure boot state of the BlueField SoC is represented by two bits:
0 = production state
1 = secure boot enabled
2 = non-secure (secure boot disabled)
3 = RMA state
There is also a single bit to indicate whether production keys or
development keys are being used when secure boot is enabled.
This single bit (specified by MLXBF_BOOTCTL_SB_DEV_MASK) only has
meaning if secure boot state equals 1 (secure boot enabled).
The secure boot states are as follows:
- “GA secured” is when secure boot is enabled with official production keys.
- “Secured (development)” is when secure boot is enabled with development keys.
Without this fix “GA Secured” is displayed on development cards which is
misleading. This patch updates the logic in "lifecycle_state_show()" to
handle the case where the SoC is configured for secure boot and is using
development keys.
Armin Wolf [Wed, 29 Nov 2023 18:16:54 +0000 (19:16 +0100)]
platform/x86: wmi: Skip blocks with zero instances
Some machines like the HP Omen 17 ck2000nf contain WMI blocks
with zero instances, so any WMI driver which tries to handle the
associated WMI device will fail.
Skip such WMI blocks to avoid confusing any WMI drivers.
platform/surface: aggregator: fix recv_buf() return value
Serdev recv_buf() callback is supposed to return the amount of bytes
consumed, therefore an int in between 0 and count.
Do not return negative number in case of issue, when
ssam_controller_receive_buf() returns ESHUTDOWN just returns 0, e.g. no
bytes consumed, this keep the exact same behavior as it was before.
This fixes a potential WARN in serdev-ttyport.c:ttyport_receive_buf().
Luke D. Jones [Sun, 26 Nov 2023 23:05:21 +0000 (12:05 +1300)]
platform/x86: asus-wmi: disable USB0 hub on ROG Ally before suspend
ASUS have worked around an issue in XInput where it doesn't support USB
selective suspend, which causes suspend issues in Windows. They worked
around this by adjusting the MCU firmware to disable the USB0 hub when
the screen is switched off during the Microsoft DSM suspend path in ACPI.
The issue we have with this however is one of timing - the call the tells
the MCU to this isn't able to complete before suspend is done so we call
this in a prepare() and add a small msleep() to ensure it is done. This
must be done before the screen is switched off to prevent a variety of
possible races.
Further to this the MCU powersave option must also be disabled as it can
cause a number of issues such as:
- unreliable resume connection of N-Key
- complete loss of N-Key if the power is plugged in while suspended
Disabling the powersave option prevents this.
Without this the MCU is unable to initialise itself correctly on resume.
Hans de Goede [Mon, 20 Nov 2023 15:42:35 +0000 (16:42 +0100)]
platform/x86: asus-wmi: Filter Volume key presses if also reported via atkbd
Use the i8042-filter to check if Volume key presses are also reported
via atkbd and if yes then filter out the WMI events to avoid reporting
each key-press twice.
Note depending on in which order the PS/2 data vs the WMI event are
handled the first volume key press may still be reported twice. This is
a compromise versus DMI quirks (unmaintainable) or other more complex
solutions.
Hans de Goede [Mon, 20 Nov 2023 15:42:34 +0000 (16:42 +0100)]
platform/x86: asus-wmi: Change q500a_i8042_filter() into a generic i8042-filter
Change asus_q500a_i8042_filter() into a generic i8042-filter,
using a new filter_i8042_e1_extended_codes flag in the quirks struct
to decide if e1 extended codes should be filtered out or not.
This is a preparation patch for adding support for filtering volume key
events being reported twice through both the PS/2 keyboard and asus-wmi.
Note while modifying the code also drop the unnecessary unlikely()
annotations, this is not in a hot path so those are not necessary.
Hans de Goede [Mon, 20 Nov 2023 15:42:33 +0000 (16:42 +0100)]
platform/x86: asus-wmi: Move i8042 filter install to shared asus-wmi code
asus-nb-wmi calls i8042_install_filter() in some cases, but it never
calls i8042_remove_filter(). This means that a dangling pointer to
the filter function is left after rmmod leading to crashes.
Fix this by moving the i8042-filter installation to the shared
asus-wmi code and also remove it from the shared code on driver unbind.
core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events'
core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'
It looks like it were copy'n'paste typos when these descriptions
had been introduced. Fix the typos.
Hans de Goede [Mon, 20 Nov 2023 15:45:45 +0000 (16:45 +0100)]
MAINTAINERS: Drop Mark Gross as maintainer for x86 platform drivers
Mark has not really been active as maintainer for x86 platform drivers
lately, drop Mark from the MAINTAINERS entries for drivers/platform/x86,
drivers/platform/mellanox and drivers/platform/surface.
Shyam Sundar S K [Thu, 16 Nov 2023 17:01:21 +0000 (22:31 +0530)]
platform/x86/amd/pmc: adjust getting DRAM size behavior
amd_pmc_get_dram_size() is used to get the DRAM size information. But
in the current code, mailbox command to get the DRAM size info is sent
based on the values of dev->major and dev->minor.
But dev->major and dev->minor will have either junk or zero assigned to
them until at least once a call to amd_pmc_get_smu_version() is made
which ideally populates dev->major and dev->minor.
However, adding a amd_pmc_get_smu_version() call to
amd_pmc_get_dram_size() has a downside of elevating the boot times.
After talking to the PMFW team, it's understood that the "get dram
size" mbox command would only be supported on specific platforms (like
Mendocino) and not all. So, adjust getting DRAM size behavior such
that,
- if running on Rembrandt or Mendocino and the underlying PMFW knows
how to execute the "get dram size" command it shall give the custom
dram size.
- if the underlying FW does not report the dram size, we just proceed
further and assign the default dram size.
The simplest way to address this is to remove amd_pmc_get_dram_size()
function and directly call the "get dram size" command in the
amd_pmc_s2d_init().
platform/x86: hp-bioscfg: Fix error handling in hp_add_other_attributes()
'attr_name_kobj' is allocated using kzalloc, but on all the error paths
it is not freed, hence we have a memory leak.
Fix the error path before kobject_init_and_add() by adding kfree().
kobject_put() must be always called after passing the object to
kobject_init_and_add(). Only the error path which is immediately next
to kobject_init_and_add() calls kobject_put() and not any other error
path after it.
Fix the error handling after kobject_init_and_add() by moving the
kobject_put() into the goto label err_other_attr_init that is already
used by all the error paths after kobject_init_and_add().
Miri Korenblit [Sun, 12 Nov 2023 14:36:20 +0000 (16:36 +0200)]
wifi: iwlwifi: fix system commands group ordering
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Linus Torvalds [Sun, 12 Nov 2023 19:05:31 +0000 (11:05 -0800)]
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Include the upper 5 address bits when inserting TLB entries on a
64-bit kernel.
On physical machines those are ignored, but in qemu it's nice to have
them included and to be correct.
- Stop the 64-bit kernel and show a warning if someone tries to boot on
a machine with a 32-bit CPU
- Fix a "no previous prototype" warning in parport-gsc
* tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Prevent booting 64-bit kernels on PA1.x machines
parport: gsc: mark init function static
parisc/pgtable: Do not drop upper 5 address bits of physical address
Linus Torvalds [Sun, 12 Nov 2023 18:58:08 +0000 (10:58 -0800)]
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- support PREEMPT_DYNAMIC with static keys
- relax memory ordering for atomic operations
- support BPF CPU v4 instructions for LoongArch
- some build and runtime warning fixes
* tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
selftests/bpf: Enable cpu v4 tests for LoongArch
LoongArch: BPF: Support signed mod instructions
LoongArch: BPF: Support signed div instructions
LoongArch: BPF: Support 32-bit offset jmp instructions
LoongArch: BPF: Support unconditional bswap instructions
LoongArch: BPF: Support sign-extension mov instructions
LoongArch: BPF: Support sign-extension load instructions
LoongArch: Add more instruction opcodes and emit_* helpers
LoongArch/smp: Call rcutree_report_cpu_starting() earlier
LoongArch: Relax memory ordering for atomic operations
LoongArch: Mark __percpu functions as always inline
LoongArch: Disable module from accessing external data directly
LoongArch: Support PREEMPT_DYNAMIC with static keys
Linus Torvalds [Sun, 12 Nov 2023 01:17:22 +0000 (17:17 -0800)]
Merge tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- ctime caching fix (for setxattr)
- encryption fix
- DNS resolver mount fix
- debugging improvements
- multichannel fixes including cases where server stops or starts
supporting multichannel after mount
- reconnect fix
- minor cleanups
* tag '6.7-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module version number for cifs.ko
cifs: handle when server stops supporting multichannel
cifs: handle when server starts supporting multichannel
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
smb3: allow dumping session and tcon id to improve stats analysis and debugging
smb: client: fix mount when dns_resolver key is not available
smb3: fix caching of ctime on setxattr
smb3: minor cleanup of session handling code
cifs: reconnect work should have reference on server struct
cifs: do not pass cifs_sb when trying to add channels
cifs: account for primary channel in the interface list
cifs: distribute channels across interfaces based on speed
cifs: handle cases where a channel is closed
smb3: more minor cleanups for session handling routines
smb3: minor RDMA cleanup
cifs: Fix encryption of cleared, but unset rq_iter data buffers
Linus Torvalds [Sat, 11 Nov 2023 00:35:04 +0000 (16:35 -0800)]
Merge tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
Linus Torvalds [Fri, 10 Nov 2023 23:07:01 +0000 (15:07 -0800)]
Merge tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- fix double free and resource leaks in imsttfb
- lots of remove callback cleanups and section mismatch fixes in
omapfb, amifb and atmel_lcdfb
- error code fix and memparse simplification in omapfb
* tag 'fbdev-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (31 commits)
fbdev: fsl-diu-fb: mark wr_reg_wa() static
fbdev: amifb: Convert to platform remove callback returning void
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
fbdev: hyperv_fb: fix uninitialized local variable use
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
fbdev: omapfb/opa362: Convert to platform remove callback returning void
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
fbdev: omapfb/dvi: Convert to platform remove callback returning void
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
fbdev: omapfb/dpi: Convert to platform remove callback returning void
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
...
Linus Torvalds [Fri, 10 Nov 2023 22:59:30 +0000 (14:59 -0800)]
Merge tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"Dave's VPN to the big machine died, so it's on me to do fixes pr this
and next week while everyone else is at plumbers.
- big pile of amd fixes, but mostly for hw support newly added in 6.7
- i915 fixes, mostly minor things
- qxl memory leak fix
- vc4 uaf fix in mock helpers
- syncobj fix for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE"
* tag 'drm-next-2023-11-10' of git://anongit.freedesktop.org/drm/drm: (78 commits)
drm/amdgpu: fix error handling in amdgpu_vm_init
drm/amdgpu: Fix possible null pointer dereference
drm/amdgpu: move UVD and VCE sched entity init after sched init
drm/amdgpu: move kfd_resume before the ip late init
drm/amd: Explicitly check for GFXOFF to be enabled for s0ix
drm/amdgpu: Change WREG32_RLC to WREG32_SOC15_RLC where inst != 0 (v2)
drm/amdgpu: Use correct KIQ MEC engine for gfx9.4.3 (v5)
drm/amdgpu: add smu v13.0.6 pcs xgmi ras error query support
drm/amdgpu: fix software pci_unplug on some chips
drm/amd/display: remove duplicated argument
drm/amdgpu: correct mca debugfs dump reg list
drm/amdgpu: correct acclerator check architecutre dump
drm/amdgpu: add pcs xgmi v6.4.0 ras support
drm/amdgpu: Change extended-scope MTYPE on GC 9.4.3
drm/amdgpu: disable smu v13.0.6 mca debug mode by default
drm/amdgpu: Support multiple error query modes
drm/amdgpu: refine smu v13.0.6 mca dump driver
drm/amdgpu: Do not program PF-only regs in hdp_v4_0.c under SRIOV (v2)
drm/amdgpu: Skip PCTL0_MMHUB_DEEPSLEEP_IB write in jpegv4.0.3 under SRIOV
drm: amd: Resolve Sphinx unexpected indentation warning
...
Linus Torvalds [Fri, 10 Nov 2023 20:22:14 +0000 (12:22 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Mostly PMU fixes and a reworking of the pseudo-NMI disabling on broken
MediaTek firmware:
- Move the MediaTek GIC quirk handling from irqchip to core. Before
the merging window commit 44bd78dd2b88 ("irqchip/gic-v3: Disable
pseudo NMIs on MediaTek devices w/ firmware issues") temporarily
addressed this issue. Fixed now at a deeper level in the arch code
- Reject events meant for other PMUs in the CoreSight PMU driver,
otherwise some of the core PMU events would disappear
- Fix the Armv8 PMUv3 driver driver to not truncate 64-bit registers,
causing some events to be invisible
- Remove duplicate declaration of __arm64_sys##name following the
patch to avoid prototype warning for syscalls
- Typos in the elf_hwcap documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Remove duplicate declaration
Revert "arm64: smp: avoid NMI IPIs with broken MediaTek FW"
arm64: Move MediaTek GIC quirk handling from irqchip to core
arm64/arm: arm_pmuv3: perf: Don't truncate 64-bit registers
perf: arm_cspmu: Reject events meant for other PMUs
Documentation/arm64: Fix typos in elf_hwcaps
Linus Torvalds [Fri, 10 Nov 2023 19:57:51 +0000 (11:57 -0800)]
Merge tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes for rc1.
The majority of changes are various ASoC driver-specific small fixes
and usual HD-audio quirks, while there are a couple of core changes: a
fix in ALSA core procfs code to avoid deadlocks at disconnection and
an ASoC core fix for DAPM clock widgets"
* tag 'sound-fix-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
OSS: dmasound/paula: Convert to platform remove callback returning void
ALSA: hda: ASUS UM5302LA: Added quirks for cs35L41/10431A83 on i2c bus
ALSA: info: Fix potential deadlock at disconnection
ASoC: nau8540: Add self recovery to improve capture quility
ALSA: hda/realtek: Add support dual speaker for Dell
ALSA: hda: Add ASRock X670E Taichi to denylist
ALSA: hda/realtek: Add quirk for ASUS UX7602ZM
ASoC: SOF: sof-client: trivial: fix comment typo
ASoC: dapm: fix clock get name
ASoC: hdmi-codec: register hpd callback on component probe
ASoC: mediatek: mt8186_mt6366_rt1019_rt5682s: trivial: fix error messages
ASoC: da7219: Improve system suspend and resume handling
ASoC: codecs: Modify macro value error
ASoC: codecs: Modify the wrong judgment of re value
ASoC: codecs: Modify the maximum value of calib
ASoC: amd: acp: fix for i2s mode register field update
ASoC: codecs: aw88399: Fix -Wuninitialized in aw_dev_set_vcalb()
ASoC: rt712-sdca: fix speaker route missing issue
ASoC: rockchip: Fix unused rockchip_i2s_tdm_match warning for !CONFIG_OF
ASoC: ti: omap-mcbsp: Fix runtime PM underflow warnings
Linus Torvalds [Fri, 10 Nov 2023 19:44:38 +0000 (11:44 -0800)]
Merge tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: one Kconfig
dependency fix and another fix for a long standing issue where a sync
transfer races with system suspend"
* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix null dereference on suspend
spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
Linus Torvalds [Fri, 10 Nov 2023 19:40:38 +0000 (11:40 -0800)]
Merge tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix broken cache-flush support for Micron eMMCs
- Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'
MMC host:
- sdhci_am654: Fix TAP value parsing for legacy speed mode
- sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
- vub300: Fix an error path in probe"
* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
mmc: vub300: fix an error code
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
mmc: sdhci_am654: fix start loop index for TAP value parsing
Linus Torvalds [Fri, 10 Nov 2023 19:34:16 +0000 (11:34 -0800)]
Merge tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"This contains two very small fixes that I failed to include in the
main pull request"
* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix double shift bug
pwm: samsung: Fix a bit test in pwm_samsung_resume()
Linus Torvalds [Fri, 10 Nov 2023 19:25:58 +0000 (11:25 -0800)]
Merge tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"Mostly just a few fixes and cleanups caused by the read multishot
support.
Outside of that, a stable fix for how a connect retry is done"
* tag 'io_uring-6.7-2023-11-10' of git://git.kernel.dk/linux:
io_uring: do not clamp read length for multishot read
io_uring: do not allow multishot read to set addr or len
io_uring: indicate if io_kbuf_recycle did recycle anything
io_uring/rw: add separate prep handler for fixed read/write
io_uring/rw: add separate prep handler for readv/writev
io_uring/net: ensure socket is marked connected on connect retry
io_uring/rw: don't attempt to allocate async data if opcode doesn't need it
- nbd use-after-free fix. May need a followup, but at least it's better
than what it was before (Li)
- Rate limit write on read-only device warnings (Yu)
* tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux:
nvme: keyring: fix conditional compilation
nvme: common: make keyring and auth separate modules
blk-core: use pr_warn_ratelimited() in bio_check_ro()
nbd: fix uaf in nbd_open
nvme: start keep-alive after admin queue setup
nvme-loop: always quiesce and cancel commands before destroying admin q
nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()
nvme-auth: always set valid seq_num in dhchap reply
nvme-auth: add flag for bi-directional auth
nvme-auth: auth success1 msg always includes resp
nvme: fix error-handling for io_uring nvme-passthrough
nvme: update firmware version after commit
nvme-tcp: Fix a memory leak
nvme-auth: use crypto_shash_tfm_digest()
Linus Torvalds [Fri, 10 Nov 2023 19:15:34 +0000 (11:15 -0800)]
Merge tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Revert a change in ata_pci_shutdown_one() to suspend disks on
shutdown as this is now done using the manage_shutdown scsi device
flag (me)
- Change the pata_falcon and pata_gayle drivers to stop using
module_platform_driver_probe(). This makes these drivers more inline
with all other drivers (allowing bind/unbind) and suppress a
compilation warning (Uwe)
- Convert the pata_falcon and pata_gayle drivers to the new
.remove_new() void-return callback. These 2 drivers are the last ones
needing this change (Uwe)
* tag 'ata-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_gayle: Convert to platform remove callback returning void
ata: pata_falcon: Convert to platform remove callback returning void
ata: pata_gayle: Stop using module_platform_driver_probe()
ata: pata_falcon: Stop using module_platform_driver_probe()
ata: libata-core: Fix ata_pci_shutdown_one()
Linus Torvalds [Fri, 10 Nov 2023 19:09:07 +0000 (11:09 -0800)]
Merge tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- don't leave pages decrypted for DMA in encrypted memory setups linger
around on failure (Petr Tesarik)
- fix an out of bounds access in the new dynamic swiotlb code (Petr
Tesarik)
- fix dma_addressing_limited for systems with weird physical memory
layouts (Jia He)
* tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM
dma-mapping: move dma_addressing_limited() out of line
swiotlb: do not free decrypted pages if dynamic
Linus Torvalds [Fri, 10 Nov 2023 18:58:49 +0000 (10:58 -0800)]
Merge tag 'lsm-pr-20231109' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
"We've got two small patches to correct the default return
value of two LSM hooks: security_vm_enough_memory_mm() and
security_inode_getsecctx()"
* tag 'lsm-pr-20231109' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value for inode_getsecctx
lsm: fix default return value for vm_enough_memory
Linus Torvalds [Fri, 10 Nov 2023 18:23:53 +0000 (10:23 -0800)]
Merge tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- slab out of bounds fix in ACL handling
- fix malformed request oops
- minor doc fix
* tag '6.7-rc-smb3-server-part2' of git://git.samba.org/ksmbd:
ksmbd: handle malformed smb1 message
ksmbd: fix kernel-doc comment of ksmbd_vfs_kern_path_locked()
ksmbd: fix slab out of bounds write in smb_inherit_dacl()
Linus Torvalds [Fri, 10 Nov 2023 17:52:56 +0000 (09:52 -0800)]
Merge tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn).
The series was originally developed by Christian and later picked up
and brought over the finish line by Alexander, who also contributed
an enabler on the MDS side (separate owner_{u,g}id fields on the
wire).
The required exports for mnt_idmap_{get,put}() in VFS have been acked
by Christian and received no objection from Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li).
This would help in scenarios with dozens of CephFS mounts on the same
node which are getting increasingly common, especially in the
Kubernetes world.
* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
ceph: allow idmapped mounts
ceph: allow idmapped atomic_open inode op
ceph: allow idmapped set_acl inode op
ceph: allow idmapped setattr inode op
ceph: pass idmap to __ceph_setattr
ceph: allow idmapped permission inode op
ceph: allow idmapped getattr inode op
ceph: pass an idmapping to mknod/symlink/mkdir
ceph: add enable_unsafe_idmap module parameter
ceph: handle idmapped mounts in create_request_message()
ceph: stash idmapping in mdsc request
fs: export mnt_idmap_get/mnt_idmap_put
libceph, ceph: move mdsmap.h to fs/ceph
ceph: print cluster fsid and client global_id in all debug logs
ceph: rename _to_client() to _to_fs_client()
ceph: pass the mdsc to several helpers
libceph: add doutc and *_client debug macros support
Linus Torvalds [Fri, 10 Nov 2023 17:23:17 +0000 (09:23 -0800)]
Merge tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for handling misaligned accesses in S-mode
- Probing for misaligned access support is now properly cached and
handled in parallel
- PTDUMP now reflects the SW reserved bits, as well as the PBMT and
NAPOT extensions
- Performance improvements for TLB flushing
- Support for many new relocations in the module loader
- Various bug fixes and cleanups
* tag 'riscv-for-linus-6.7-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
riscv: Optimize bitops with Zbb extension
riscv: Rearrange hwcap.h and cpufeature.h
drivers: perf: Do not broadcast to other cpus when starting a counter
drivers: perf: Check find_first_bit() return value
of: property: Add fw_devlink support for msi-parent
RISC-V: Don't fail in riscv_of_parent_hartid() for disabled HARTs
riscv: Fix set_memory_XX() and set_direct_map_XX() by splitting huge linear mappings
riscv: Don't use PGD entries for the linear mapping
RISC-V: Probe misaligned access speed in parallel
RISC-V: Remove __init on unaligned_emulation_finish()
RISC-V: Show accurate per-hart isa in /proc/cpuinfo
RISC-V: Don't rely on positional structure initialization
riscv: Add tests for riscv module loading
riscv: Add remaining module relocations
riscv: Avoid unaligned access when relocating modules
riscv: split cache ops out of dma-noncoherent.c
riscv: Improve flush_tlb_kernel_range()
riscv: Make __flush_tlb_range() loop over pte instead of flushing the whole tlb
riscv: Improve flush_tlb_range() for hugetlb pages
riscv: Improve tlb_flush()
...
Linus Torvalds [Fri, 10 Nov 2023 17:19:46 +0000 (09:19 -0800)]
Merge tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed AR7 platform support
- cleanups and fixes
* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: AR7: remove platform
watchdog: ar7_wdt: remove driver to prepare for platform removal
vlynq: remove bus driver
mtd: parsers: ar7: remove support
serial: 8250: remove AR7 support
arch: mips: remove ReiserFS from defconfig
MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
MIPS: KVM: Fix a build warning about variable set but not used
MIPS: Remove dead code in relocate_new_kernel
mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
mips: dts: ralink: mt7621: define each reset as an item
mips: dts: ingenic: Remove unneeded probe-type properties
MIPS: loongson32: Remove dma.h and nand.h
Alex Deucher [Wed, 8 Nov 2023 14:40:44 +0000 (09:40 -0500)]
drm/amdgpu: move UVD and VCE sched entity init after sched init
We need kernel scheduling entities to deal with handle clean up
if apps are not cleaned up properly. With commit 56e449603f0ac5
("drm/sched: Convert the GPU scheduler to variable number of run-queues")
the scheduler entities have to be created after scheduler init, so
change the ordering to fix this.
Tim Huang [Thu, 19 Oct 2023 07:50:43 +0000 (15:50 +0800)]
drm/amdgpu: move kfd_resume before the ip late init
The kfd_resume needs to touch GC registers to enable the interrupts,
it needs to be done before GFXOFF is enabled to ensure that the GFX is
not off and GC registers can be touched. So move kfd_resume before the
amdgpu_device_ip_late_init which enables the CGPG/GFXOFF.
Daniel Vetter [Fri, 10 Nov 2023 15:54:41 +0000 (16:54 +0100)]
Merge tag 'drm-misc-fixes-2023-11-08' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-fixes for v6.7-rc1:
qxl:
- qxl memory leak fix.
syncobj:
- Fix waiting for DRM_SYNCOBJ_WAIT_FLAGS_WAIT_AVAILABLE
vc4:
- Fix UAF in mock helpers
Signed-off-by: Daniel Vetter <[email protected]>
From: Maarten Lankhorst <[email protected]>
[sima: Stitch together both changelogs from Maarten. Also because of
branch history this contains a few more bugfixes which are already in
v6.6, but I didn't feel like this justifies some backmerge since there
wasn't any real conflict.] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Daniel Vetter [Fri, 10 Nov 2023 15:43:44 +0000 (16:43 +0100)]
Merge tag 'drm-intel-next-fixes-2023-11-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 fixes for v6.7-rc1:
- Fix null dereference when perf interface is not available
- Fix a -Wstringop-overflow warning
- Fix a -Wformat-truncation warning in intel_tc_port_init
- Flush WC GGTT only on required platforms
- Fix MTL HBR3 rate support on C10 phy and eDP
- Fix MTL notify_guc for multi-GT
- Bump GLK CDCLK frequency when driving multiple pipes
- Fix potential spectre vulnerability
Shyam Prasad N [Fri, 13 Oct 2023 11:40:09 +0000 (11:40 +0000)]
cifs: handle when server stops supporting multichannel
When a server stops supporting multichannel, we will
keep attempting reconnects to the secondary channels today.
Avoid this by freeing extra channels when negotiate
returns no multichannel support.
Steve French [Fri, 10 Nov 2023 07:24:16 +0000 (01:24 -0600)]
Missing field not being returned in ioctl CIFS_IOC_GET_MNT_INFO
The tcon_flags field was always being set to zero in the information
about the mount returned by the ioctl CIFS_IOC_GET_MNT_INFO instead
of being set to the value of the Flags field in the tree connection
structure as intended.
Helge Deller [Fri, 10 Nov 2023 15:13:15 +0000 (16:13 +0100)]
parisc: Prevent booting 64-bit kernels on PA1.x machines
Bail out early with error message when trying to boot a 64-bit kernel on
32-bit machines. This fixes the previous commit to include the check for
true 64-bit kernels as well.
Mark Hasemeyer [Tue, 7 Nov 2023 21:47:43 +0000 (14:47 -0700)]
spi: Fix null dereference on suspend
A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.
Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
called which dereferences cur_msg (which is now NULL)
Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag.
tracing: fprobe-event: Fix to check tracepoint event and return
Fix to check the tracepoint event is not valid with $retval.
The commit 08c9306fc2e3 ("tracing/fprobe-event: Assume fprobe is
a return event by $retval") introduced automatic return probe
conversion with $retval. But since tracepoint event does not
support return probe, $retval is not acceptable.
Without this fix, ftracetest, tprobe_syntax_errors.tc fails;
[22] Tracepoint probe event parser error log check [FAIL]
----
# tail 22-tprobe_syntax_errors.tc-log.mRKroL
+ ftrace_errlog_check trace_fprobe t kfree ^$retval dynamic_events
+ printf %s t kfree
+ wc -c
+ pos=8
+ printf %s t kfree ^$retval
+ tr -d ^
+ command=t kfree $retval
+ echo Test command: t kfree $retval
Test command: t kfree $retval
+ echo
----
So 't kfree $retval' should fail (tracepoint doesn't support
return probe) but passed it.
Most architectures that support kprobes declare this function in their
own asm/kprobes.h header and provide an override, but some are missing
the prototype, which causes a warning for the __weak stub implementation:
kernel/kprobes.c:1865:12: error: no previous prototype for 'kprobe_exceptions_notify' [-Werror=missing-prototypes]
1865 | int __weak kprobe_exceptions_notify(struct notifier_block *self,
Move the prototype into linux/kprobes.h so it is visible to all
the definitions.
wuqiang.matt [Fri, 10 Nov 2023 10:59:04 +0000 (19:59 +0900)]
lib: test_objpool: make global variables static
Kernel test robot reported build warnings that structures g_ot_sync_ops,
g_ot_async_ops and g_testcases should be static. These definitions are
only used in test_objpool.c, so make them static
Documentation: tracing: Add a note about argument and retval access
Add a note about the argument and return value accecss will be best
effort. Depending on the type, it will be passed via stack or a
pair of the registers, but $argN and $retval only support the
single register access.
Dan Carpenter [Wed, 25 Oct 2023 11:58:18 +0000 (14:58 +0300)]
pwm: Fix double shift bug
These enums are passed to set/test_bit(). The set/test_bit() functions
take a bit number instead of a shifted value. Passing a shifted value
is a double shift bug like doing BIT(BIT(1)). The double shift bug
doesn't cause a problem here because we are only checking 0 and 1 but
if the value was 5 or above then it can lead to a buffer overflow.
Dan Carpenter [Wed, 25 Oct 2023 11:57:34 +0000 (14:57 +0300)]
pwm: samsung: Fix a bit test in pwm_samsung_resume()
The PWMF_REQUESTED enum is supposed to be used with test_bit() and not
used as in a bitwise AND. In this specific code the flag will never be
set so the function is effectively a no-op.
fbdev: amifb: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: amifb: Mark driver struct with __refdata to prevent section mismatch warning
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent a section mismatch warning.
Steve French [Thu, 9 Nov 2023 21:28:12 +0000 (15:28 -0600)]
smb3: allow dumping session and tcon id to improve stats analysis and debugging
When multiple mounts are to the same share from the same client it was not
possible to determine which section of /proc/fs/cifs/Stats (and DebugData)
correspond to that mount. In some recent examples this turned out to be
a significant problem when trying to analyze performance data - since
there are many cases where unless we know the tree id and session id we
can't figure out which stats (e.g. number of SMB3.1.1 requests by type,
the total time they take, which is slowest, how many fail etc.) apply to
which mount. The only existing loosely related ioctl CIFS_IOC_GET_MNT_INFO
does not return the information needed to uniquely identify which tcon
is which mount although it does return various flags and device info.
Add a cifs.ko ioctl CIFS_IOC_GET_TCON_INFO (0x800ccf0c) to return tid,
session id, tree connect count.
Arnd Bergmann [Wed, 8 Nov 2023 14:58:13 +0000 (15:58 +0100)]
fbdev: hyperv_fb: fix uninitialized local variable use
When CONFIG_SYSFB is disabled, the hyperv_fb driver can now run into
undefined behavior on a gen2 VM, as indicated by this smatch warning:
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'base'.
drivers/video/fbdev/hyperv_fb.c:1077 hvfb_getmem() error: uninitialized symbol 'size'.
Since there is no way to know the actual framebuffer in this configuration,
just return an allocation failure here, which should avoid the build
warning and the undefined behavior.
fbdev: omapfb/tpd12s015: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/tfp410: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/sharp-ls037v7dw01: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/opa362: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/hdmi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/dvi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/dsi-cm: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/dpi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/analog-tv: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: atmel_lcdfb: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
fbdev: omapfb/tpd12s015: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/tfp410: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/sharp-ls037v7dw01: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/opa362: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/hdmi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/dvi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/dsi-cm: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/dpi: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: omapfb/analog-tv: Don't put .remove() in .exit.text and drop suppress_bind_attrs
On today's platforms the memory savings of putting the remove function
in .exit isn't that relevant any more. It only matters for built-in
drivers and typically saves a few 100k.
The downside is that the driver cannot be unbound at runtime which is
ancient and also slightly complicates testing. Also it requires to mark
the driver struct with __refdata which is needed to suppress a (W=1)
modpost warning:
fbdev: atmel_lcdfb: Stop using platform_driver_probe()
On today's platforms the benefit of platform_driver_probe() isn't that
relevant any more. It allows to drop some code after booting (or module
loading) for .probe() and discard the .remove() function completely if
the driver is built-in. This typically saves a few 100k.
The downside of platform_driver_probe() is that the driver cannot be
bound and unbound at runtime which is ancient and also slightly
complicates testing. There are also thoughts to deprecate
platform_driver_probe() because it adds some complexity in the driver
core for little gain. Also many drivers don't use it correctly. This
driver for example misses to mark the driver struct with __refdata which
is needed to suppress a (W=1) modpost warning:
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
Linus Torvalds [Fri, 10 Nov 2023 01:04:58 +0000 (17:04 -0800)]
Merge tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash and hides the Kconfig sub-options for
the jitter RNG"
* tag 'v6.7-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Set using_shash for cloned ahash wrapper over shash
crypto: jitterentropy - Hide esoteric Kconfig options under FIPS and EXPERT
projects / linux.git / log