Namhyung Kim [Mon, 9 Nov 2015 05:45:44 +0000 (14:45 +0900)]
perf hists browser: Support folded callchains
The folded callchain mode prints all chains in a single line.
Currently perf report --tui doesn't support folded callchains. Like
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add flat_val list to
struct callchain_node and show them along with the (normal) val list.
Namhyung Kim [Mon, 9 Nov 2015 05:45:43 +0000 (14:45 +0900)]
perf hists browser: Support flat callchains
The flat callchain mode is to print all chains in a single, simple
hierarchy so make it easy to see.
Currently perf report --tui doesn't show flat callchains properly. With
flat callchains, only leaf nodes are added to the final rbtree so it
should show entries in parent nodes. To do that, add parent_val list to
struct callchain_node and show them along with the (normal) val list.
For example, consider following callchains with '-g graph'.
Namhyung Kim [Mon, 9 Nov 2015 05:45:41 +0000 (14:45 +0900)]
perf report: Add callchain value option
Now -g/--call-graph option supports how to display callchain values.
Possible values are 'percent', 'period' and 'count'. The percent is
same as before and it's the default behavior. The period displays the
raw period value rather than the percentage. The count displays the
number of occurrences.
Namhyung Kim [Mon, 9 Nov 2015 05:45:37 +0000 (14:45 +0900)]
perf report: Support folded callchain mode on --stdio
Add new call chain option (-g) 'folded' to print callchains in a line.
The callchains are separated by semicolons, and preceded by (absolute)
percent values and a space.
For example, the following 20 lines can be printed in 3 lines with the
folded output mode:
Masami Hiramatsu [Wed, 18 Nov 2015 06:40:35 +0000 (15:40 +0900)]
perf machine: Fix machine__findnew_module_map to put dso
Fix machine__findnew_module_map to drop the reference to the dso because
it is already referenced by both machine__findnew_module_dso() and
map__new2().
Masami Hiramatsu [Wed, 18 Nov 2015 06:40:31 +0000 (15:40 +0900)]
perf tools: Fix __dsos__addnew to put dso after adding it to the list
__dsos__addnew should drop the constructor reference to dso after adding
it to the list, because __dsos__add() will get a reference that will be
kept while it is in the list.
This fixes DSO leaks when entries are removed to the list and the refcount
never gets to zero.
This means that the dso__load_sym calls map__new2 and maps_insert, both
of them bump the map refcount, but map_groups__exit will drop just one
reference.
Fix it by dropping the refcount after inserting it into kmaps.
Masami Hiramatsu [Thu, 19 Nov 2015 06:04:53 +0000 (15:04 +0900)]
perf tools: Make perf_exec_path() always return malloc'd string
Since system_path() returns malloc'd string if given path is not an
absolute path, perf_exec_path() sometimes returns a static string and
sometimes returns a malloc'd string depending on the environment
variables or command options.
This may cause a memory leak because the caller can not unconditionally
free the returned string.
This fixes perf_exec_path() and system_path() to always return a
malloc'd string, so the caller can always free it.
Masami Hiramatsu [Wed, 18 Nov 2015 06:40:24 +0000 (15:40 +0900)]
perf machine: Fix to destroy kernel maps when machine exits
Actually machine__exit forgot to call machine__destroy_kernel_maps.
This fixes some memory leaks on map as below.
Without this fix.
----
./perf probe vfs_read
Added new event:
probe:vfs_read (on vfs_read)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read -aR sleep 1
REFCNT: BUG: Unreclaimed objects found.
REFCNT: Total 4 objects are not reclaimed.
To see all backtraces, rerun with -v option
----
With this fix.
----
./perf probe vfs_read
Added new event:
probe:vfs_read (on vfs_read)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read -aR sleep 1
REFCNT: BUG: Unreclaimed objects found.
REFCNT: Total 2 objects are not reclaimed.
To see all backtraces, rerun with -v option
----
map__new2() returns map with refcnt = 1, and also map_groups__insert
gets it again in__machine__create_kernel_maps().
machine__destroy_kernel_maps() calls map_groups__remove() to
decrement the refcnt, but before decrement it again (corresponding
to map__new2), it makes vmlinux_maps[type] = NULL. And this may
cause a refcnt leak.
This pattern clearly shows that the refcnt of the map is acquired twice
by map__new2 and maps__insert but released onlu once at
map_groups__exit, when we purge its maps rbtree.
Since maps__insert already reference counted the map, we have to drop
the constructor (map__new2) reference count right after inserting it.
These happened in machine__findnew_module_map, as below.
----
# eu-addr2line -e ./perf -f 0x4b8aaf
machine__findnew_module_map inlined at util/machine.c:1046
in machine__create_module
util/machine.c:582
# eu-addr2line -e ./perf -f 0x4b8acb
map_groups__insert inlined at util/machine.c:585
in machine__create_module
util/map.h:208
----
(note that both are at util/machine.c:58X which is
machine__findnew_module_map)
Wang Nan [Tue, 17 Nov 2015 08:32:50 +0000 (08:32 +0000)]
perf test: Mute test cases error messages if verbose == 0
Sometimes error messages in breaks the pretty output of 'perf test'.
For example:
# mv /lib/modules/4.3.0-rc4+/build/vmlinux{,.bak}
# perf test LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation :Failed to find the path for kernel: No such file or directory FAILED!
This patch mute test cases thoroughly by redirect their stdout and
stderr to /dev/null when verbose == 0. After applying this patch:
# ./perf test LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
37: Test BPF filter :
37.1: Test basic BPF filtering : Ok
37.2: Test BPF prologue generation : FAILED!
# ./perf test -v LLVM BPF
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test :
--- start ---
test child forked, pid 13183
Kernel build dir is set to /lib/modules/4.3.0-rc4+/build
set env: KBUILD_DIR=/lib/modules/4.3.0-rc4+/build
...
bpf: config 'func=null_lseek file->f_mode offset orig' is ok
Looking at the vmlinux_path (7 entries long)
Failed to find the path for kernel: No such file or directory
bpf_probe: failed to convert perf probe eventsFailed to add events selected by BPF
test child finished with -1
---- end ----
Test BPF filter subtest 1: FAILED!
Wang Nan [Tue, 17 Nov 2015 08:32:48 +0000 (08:32 +0000)]
perf test: Print result for each LLVM subtest
Currently 'perf test llvm' and 'perf test BPF' have multiple sub-tests,
but the result is provided in only one line:
# perf test LLVM
35: Test LLVM searching and compiling : Ok
This patch introduces sub-tests support, allowing 'perf test' to report
result for each sub-tests:
# perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Ok
35.2: Test kbuild searching : Ok
35.3: Compile source for BPF prologue generation test : Ok
When a failure happens:
# cat ~/.perfconfig
[llvm]
clang-path = "/bin/false"
# perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : FAILED!
35.2: Test kbuild searching : Skip
35.3: Compile source for BPF prologue generation test : Skip
And:
# rm ~/.perfconfig
# ./perf test LLVM
35: Test LLVM searching and compiling :
35.1: Basic BPF llvm compiling test : Skip
35.2: Test kbuild searching : Skip
35.3: Compile source for BPF prologue generation test : Skip
Skip by user:
# ./perf test -s 1,`seq -s , 3 42`
1: vmlinux symtab matches kallsyms : Skip (user override)
2: detect openat syscall event : Ok
...
35: Test LLVM searching and compiling : Skip (user override)
...
perf tests: Pass the subtest index to each test routine
Some tests have sub-tests we want to run, so allow passing this.
Wang tried to avoid having to touch all tests, but then, having the
test.func in an anonymous union makes the build fail on older compilers,
like the one in RHEL6, where:
test a = {
.func = foo,
};
fails.
To fix it leave the func pointer in the main structure and pass the subtest
index to all tests, end result function is the same, but we have just one
function pointer, not two, with and without the subtest index as an argument.
Andrew Cooper [Wed, 3 Jun 2015 09:31:14 +0000 (10:31 +0100)]
x86/cpu: Fix SMAP check in PVOPS environments
There appears to be no formal statement of what pv_irq_ops.save_fl() is
supposed to return precisely. Native returns the full flags, while lguest and
Xen only return the Interrupt Flag, and both have comments by the
implementations stating that only the Interrupt Flag is looked at. This may
have been true when initially implemented, but no longer is.
To make matters worse, the Xen PVOP leaves the upper bits undefined, making
the BUG_ON() undefined behaviour. Experimentally, this now trips for 32bit PV
guests on Broadwell hardware. The BUG_ON() is consistent for an individual
build, but not consistent for all builds. It has also been a sitting timebomb
since SMAP support was introduced.
Use native_save_fl() instead, which will obtain an accurate view of the AC
flag.
Namhyung Kim [Tue, 17 Nov 2015 00:43:24 +0000 (09:43 +0900)]
x86/ftrace: Add comment on static function tracing
There was a confusion between update_ftrace_function() and static
function tracing trampoline regarding 3rd parameter (ftrace_ops).
Add a comment for clarification.
drm/i915: skip modeset if compatible for everyone.
Bring back the i915.fastboot module parameter, disabled by default, due
to backlight regression on Chromebook Pixel 2015.
Apparently the firmware of the Chromebook in question enables the panel
but disables backlight to avoid a brief garbage scanout upon loading the
kernel/module. With fastboot, we leave the backlight untouched, in this
case disabled. The user would have to do a modeset (i.e. not just crank
up the brightness) to enable the backlight.
There is no clean fix readily available, so get back to the drawing
board by reverting.
[N.B. The reference below is for when the thread was included on public
lists, and some of the context had already been dropped by then.]
The cursor code may be entered with file_priv == NULL && handle == NULL.
The problem was introduced by:
"bf89209 drm/mga200g: Hold a proper reference for cursor_set"
which calls drm_gem_object_lookup(dev, file_priv...). Previously this wasn't
a problem because we checked the handle. Move the check early in the function
can fix the problem.
Dave Airlie [Thu, 19 Nov 2015 03:17:08 +0000 (13:17 +1000)]
Merge branch 'drm-vc4-fixes' of git://github.com/anholt/linux into drm-fixes
Here are a few little VC4 fixes for 4.4 that I didn't get in to you
before the -next pull request. I dropped the feature-ish one I'd
mentioned, and also droppped the one I saw you included in the last
-fixes pull request.
* 'drm-vc4-fixes' of git://github.com/anholt/linux:
drm/vc4: Make sure that planes aren't scaled.
drm/vc4: Fix some failure to track __iomem decorations on pointers.
drm/vc4: checking for NULL instead of IS_ERR
drm/vc4: fix itnull.cocci warnings
drm/vc4: fix platform_no_drv_owner.cocci warnings
drm/vc4: vc4_plane_duplicate_state() can be static
Dave Airlie [Thu, 19 Nov 2015 03:15:17 +0000 (13:15 +1000)]
Merge branch 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Radeon and amdgpu fixes for 4.4. A bit more the usual since I missed
last week. Misc fixes all over the place. The big changes are the
tiling configuration fixes for Fiji.
* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux: (35 commits)
drm/amdgpu: reserve/unreserve objects out of map/unmap operations
drm/amdgpu: move bo_reserve out of amdgpu_vm_clear_bo
drm/amdgpu: add lock for interval tree in vm
drm/amdgpu: keep the owner for VMIDs
drm/amdgpu: move VM manager clean into the VM code again
drm/amdgpu: cleanup VM coding style
drm/amdgpu: remove unused VM manager field
drm/amdgpu: cleanup scheduler command submission
drm/amdgpu: fix typo in firmware name
drm/amdgpu: remove the unnecessary parameter adev for amdgpu_sa_bo_new()
drm/amdgpu: wait interruptible when semaphores are disabled v2
drm/amdgpu: update pd while updating vm as well
drm/amdgpu: fix handling order in scheduler CS
drm/amdgpu: fix incorrect mutex usage v3
drm/amdgpu: cleanup scheduler fence get/put dance
drm/amdgpu: add command submission workflow tracepoint
drm/amdgpu: update Fiji's tiling mode table
drm/amdgpu: fix bug that can't enter thermal interrupt for bonaire.
drm/amdgpu: fix seq_printf format string
drm/radeon: fix quirk for MSI R7 370 Armor 2X
...
Yigal Korman [Mon, 16 Nov 2015 12:09:15 +0000 (14:09 +0200)]
mm, dax: fix DAX deadlocks (COW fault)
DAX handling of COW faults has wrong locking sequence:
dax_fault does i_mmap_lock_read
do_cow_fault does i_mmap_unlock_write
Ross's commit[1] missed a fix[2] that Kirill added to Matthew's
commit[3].
Original COW locking logic was introduced by Matthew here[4].
This should be applied to v4.3 as well.
[1] 0f90cc6609c7 mm, dax: fix DAX deadlocks
[2] 52a2b53ffde6 mm, dax: use i_mmap_unlock_write() in do_cow_fault()
[3] 843172978bb9 dax: fix race between simultaneous faults
[4] 2e4cdab0584f mm: allow page fault handlers to perform the COW
Arnd Bergmann [Mon, 16 Nov 2015 21:27:55 +0000 (22:27 +0100)]
cpufreq: mediatek: fix build error
The recently added mt8173 cpufreq driver relies on the cpu topology
that is always present on ARM64 but optional on ARM32:
drivers/cpufreq/mt8173-cpufreq.c: In function 'mtk_cpufreq_init':
drivers/cpufreq/mt8173-cpufreq.c:441:30: error: 'cpu_topology' undeclared (first use in this function)
cpumask_copy(policy->cpus, &cpu_topology[policy->cpu].core_sibling);
This refines the Kconfig dependencies so that we can still build on
ARM32, but only if COMPILE_TEST is selected and the CPU topology
code is present.
Philippe Longepe [Tue, 10 Nov 2015 01:40:47 +0000 (17:40 -0800)]
cpufreq: intel_pstate: Add separate support for Airmont cores
There are two flavors of Atom cores to be supported by intel_pstate,
Silvermont and Airmont, so make the driver distinguish between them by
adding separate frequency tables.
Separate the CPU defaults params for each of them and match the CPU IDs
against them as appropriate.
Philippe Longepe [Tue, 10 Nov 2015 01:40:46 +0000 (17:40 -0800)]
cpufreq: intel_pstate: Replace BYT with ATOM
Rename symbol and function names starting with "BYT" or "byt" to
start with "ATOM" or "atom", respectively, so as to make it clear
that they may apply to Atom in general and not just to Baytrail
(the goal is to support several Atoms architectures eventually).
Revert "cpufreq: intel_pstate: Use ACPI perf configuration"
Revert commit 37afb0003242 (cpufreq: intel_pstate: Use ACPI perf
configuration) that is reported to cause a regression to happen
on a system where invalid data are returned by the ACPI _PSS object.
Since that commit makes assumptions regarding the _PSS output
correctness that may turn out to be overly optimistic in general,
there is a concern that it may introduce regression on more
systems, so it's better to revert it now and we'll revisit the
underlying issue in the next cycle with a more robust solution.
Conflicts:
drivers/cpufreq/intel_pstate.c
Fixes: 37afb0003242 (cpufreq: intel_pstate: Use ACPI perf configuration) Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
Revert "cpufreq: intel_pstate: Avoid calculation for max/min"
Revert commit 4ef451487019 (cpufreq: intel_pstate: Avoid calculation for
max/min) as it depends on commit 37afb0003242 (cpufreq: intel_pstate: Use
ACPI perf configuration) that causes problems to happen and needs to be
reverted.
Glen Lee [Thu, 5 Nov 2015 09:51:23 +0000 (18:51 +0900)]
Revert "Staging: wilc1000: coreconfigurator: Drop unneeded wrapper functions"
The source and destination pointers are misplaced.
This will be like,
ether_addr_copy(data, bssid + ADDR2);
-> ether_addr_copy(bssid, data + ADDR2);
and also to use ether_addr_copy, it has to be proved that src/dst address are
properly aligned(2).
Merge tag 'iio-fixes-for-4.4a' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 4.4 cycle.
This set does not include those for issues introduced during the merge
window. Fixes of those will follow in a future series.
* ad5064
- Make sure the local i2c_write returns 0 on success rather than the
number of bytes transfered. Otherwise we report an error on all writes.
- Fix a shift for ad5629 and ad5669 which gives incorrect DAC output on
these parts.
* ad7793
- The product ID on the datasheet is wrong. Fix it in the driver.
* IIO_DUMMY_EVGEN
- select IRQ_WORK as a dependency.
* lpc32xx
- make sure clock is prepared before enabling.
* si7020
- data byte order was reversed. Fix it.
* vf610
- Internal temperature calculation was wrong if a different
reference voltage was used. Now use a linear interpolation
function to make it work over the full range.
- Fix a division by zero in the case of a device tree property
not being present (same issue two fixes).
* xilinx XADC
- VREFN scale was wrong - fix it.
Wang Nan [Tue, 17 Nov 2015 08:32:47 +0000 (08:32 +0000)]
perf bpf: Use same BPF program if arguments are identical
This patch allows creating only one BPF program for different
'probe_trace_event'(tev) entries generated by one
'perf_probe_event'(pev) if their prologues are identical.
This is done by comparing the argument list of different tev instances,
and the maps type of prologue and tev using a mapping array. This patch
utilizes qsort to sort the tevs. After sorting, tevs with identical
argument lists will be grouped together.
Wang Nan [Tue, 17 Nov 2015 08:32:46 +0000 (08:32 +0000)]
perf test: Fix 'perf test BPF' when it fails to find a suitable vmlinux
Two bugs in 'perf test BPF' are found when testing BPF prologue without
vmlinux:
# mv /lib/modules/4.3.0-rc4+/build/vmlinux{,.bak}
# ./perf test BPF
37: Test BPF filter :Failed to find the path for kernel: No such file or directory
Ok
Test BPF should fail in this case.
After this patch:
# ./perf test BPF
37: Test BPF filter :Failed to find the path for kernel: No such file or directory
FAILED!
# mv /lib/modules/4.3.0-rc4+/build/vmlinux{.bak,}
# ./perf test BPF
37: Test BPF filter : Ok
Wang Nan [Mon, 16 Nov 2015 12:10:14 +0000 (12:10 +0000)]
perf test: Test the BPF prologue adding infrastructure
This patch introduces a new BPF script to test the BPF prologue adding
routines. The new script probes at null_lseek, which is the function pointer
used when we try to lseek on '/dev/null'.
The null_lseek function is chosen because it is used by function pointers, so
we don't need to consider inlining and LTO.
By extracting file->f_mode, bpf-script-test-prologue.c should know whether the
file is writable or readonly. According to llseek_loop() and
bpf-script-test-prologue.c, one fourth of total lseeks should be collected.
Committer note:
Testing it:
# perf test -v BPF
<SNIP>
Kernel build dir is set to /lib/modules/4.3.0+/build
set env: KBUILD_DIR=/lib/modules/4.3.0+/build
unset env: KBUILD_OPTS
include option is set to -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h
set env: NR_CPUS=4
set env: LINUX_VERSION_CODE=0x40300
set env: CLANG_EXEC=/usr/libexec/icecc/bin/clang
set env: CLANG_OPTIONS=-xc
set env: KERNEL_INC_OPTIONS= -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/4.9.2/include -I/home/git/linux/arch/x86/include -Iarch/x86/include/generated/uapi -Iarch/x86/include/generated -I/home/git/linux/include -Iinclude -I/home/git/linux/arch/x86/include/uapi -Iarch/x86/include/generated/uapi -I/home/git/linux/include/uapi -Iinclude/generated/uapi -include /home/git/linux/include/linux/kconfig.h
set env: WORKING_DIR=/lib/modules/4.3.0+/build
set env: CLANG_SOURCE=-
llvm compiling command template: echo '/*
* bpf-script-test-prologue.c
* Test BPF prologue
*/
#ifndef LINUX_VERSION_CODE
# error Need LINUX_VERSION_CODE
# error Example: for 4.2 kernel, put 'clang-opt="-DLINUX_VERSION_CODE=0x40200" into llvm section of ~/.perfconfig'
#endif
#define SEC(NAME) __attribute__((section(NAME), used))
SEC("func=null_lseek file->f_mode offset orig")
int bpf_func__null_lseek(void *ctx, int err, unsigned long f_mode,
unsigned long offset, unsigned long orig)
{
if (err)
return 0;
if (f_mode & FMODE_WRITE)
return 0;
if (offset & 1)
return 0;
if (orig == SEEK_CUR)
return 0;
return 1;
}
char _license[] SEC("license") = "GPL";
int _version SEC("version") = LINUX_VERSION_CODE;
' | $CLANG_EXEC -D__KERNEL__ -D__NR_CPUS__=$NR_CPUS -DLINUX_VERSION_CODE=$LINUX_VERSION_CODE $CLANG_OPTIONS $KERNEL_INC_OPTIONS -Wno-unused-value -Wno-pointer-sign -working-directory $WORKING_DIR -c "$CLANG_SOURCE" -target bpf -O2 -o -
libbpf: loading object '[bpf_prologue_test]' from buffer
libbpf: section .strtab, size 135, link 0, flags 0, type=3
libbpf: section .text, size 0, link 0, flags 6, type=1
libbpf: section .data, size 0, link 0, flags 3, type=1
libbpf: section .bss, size 0, link 0, flags 3, type=8
libbpf: section func=null_lseek file->f_mode offset orig, size 112, link 0, flags 6, type=1
libbpf: found program func=null_lseek file->f_mode offset orig
libbpf: section license, size 4, link 0, flags 3, type=1
libbpf: license of [bpf_prologue_test] is GPL
libbpf: section version, size 4, link 0, flags 3, type=1
libbpf: kernel version of [bpf_prologue_test] is 40300
libbpf: section .symtab, size 168, link 1, flags 0, type=2
bpf: config program 'func=null_lseek file->f_mode offset orig'
symbol:null_lseek file:(null) line:0 offset:0 return:0 lazy:(null)
parsing arg: file->f_mode into file, f_mode(1)
parsing arg: offset into offset
parsing arg: orig into orig
bpf: config 'func=null_lseek file->f_mode offset orig' is ok
Looking at the vmlinux_path (7 entries long)
Using /lib/modules/4.3.0+/build/vmlinux for symbols
Open Debuginfo file: /lib/modules/4.3.0+/build/vmlinux
Try to find probe point from debuginfo.
Matched function: null_lseek
Probe point found: null_lseek+0
Searching 'file' variable in context.
Converting variable file into trace event.
converting f_mode in file
f_mode type is unsigned int.
Searching 'offset' variable in context.
Converting variable offset into trace event.
offset type is long long int.
Searching 'orig' variable in context.
Converting variable orig into trace event.
orig type is int.
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: p:perf_bpf_probe/func _text+4840528 f_mode=+68(%di):u32 offset=%si:s64 orig=%dx:s32
libbpf: don't need create maps for [bpf_prologue_test]
prologue: pass validation
prologue: slow path
prologue: fetch arg 0, base reg is %di
prologue: arg 0: offset 68
prologue: fetch arg 1, base reg is %si
prologue: fetch arg 2, base reg is %dx
add bpf event perf_bpf_probe:func and attach bpf program 3
adding perf_bpf_probe:func
adding perf_bpf_probe:func to 0x51672c0
mmap size 1052672B
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Opening /sys/kernel/debug/tracing//uprobe_events write=1
Parsing probe_events: p:perf_bpf_probe/func _text+4840528 f_mode=+68(%di):u32 offset=%si:s64 orig=%dx:s32
Group:perf_bpf_probe Event:func probe:p
Writing event: -:perf_bpf_probe/func
test child finished with 0
---- end ----
Test BPF filter: Ok
#
Wang Nan [Mon, 16 Nov 2015 12:10:13 +0000 (12:10 +0000)]
perf bpf: Generate prologue for BPF programs
This patch generates a prologue for each 'struct probe_trace_event' for
fetching arguments for BPF programs.
After bpf__probe(), iterate over each program to check whether prologues are
required. If none of the 'struct perf_probe_event' programs will attach to have
at least one argument, simply skip preprocessor hooking. For those who a
prologue is required, call bpf__gen_prologue() and paste the original
instruction after the prologue.
The output prologue for offn(...off2(off1(reg)))) should be:
r6 <- r1 // save ctx into a callee saved register
r7 <- fp
r7 <- r7 - stack_offset // pointer to result slot
/* load r3 with the offset in pt_regs of 'reg' */
(r7) <- r3 // make slot valid
r3 <- r3 + off1 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7 // result put onto stack
call probe_read // read unsafe pointer
jnei r0, 0, err // error checking
r3 <- (r7) // read result
r3 <- r3 + off2 // prepare to read unsafe pointer
r2 <- 8
r1 <- r7
call probe_read
jnei r0, 0, err
...
/* load r2, r3, r4 from stack */
goto success
err:
r2 <- 1
/* load r3, r4, r5 with 0 */
goto usercode
success:
r2 <- 0
usercode:
r1 <- r6 // restore ctx
// original user code
If all of arguments reside in register (dereferencing is not
required), gen_prologue_fastpath() will be used to create
fast prologue:
r3 <- (r1 + offset of reg1)
r4 <- (r1 + offset of reg2)
r5 <- (r1 + offset of reg3)
r2 <- 0
P.S.
eBPF calling convention is defined as:
* r0 - return value from in-kernel function, and exit value
for eBPF program
* r1 - r5 - arguments from eBPF program to in-kernel function
* r6 - r9 - callee saved registers that in-kernel function will
preserve
* r10 - read-only frame pointer to access stack
Committer note:
At least testing if it builds and loads:
# cat test_probe_arg.c
struct pt_regs;
__attribute__((section("lock_page=__lock_page page->flags"), used))
int func(struct pt_regs *ctx, int err, unsigned long flags)
{
return 1;
}
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
# perf record -e ./test_probe_arg.c usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
# perf evlist
perf_bpf_probe:lock_page
#
char _license[] __attribute__((section("license"), used)) = "GPL";
int _version __attribute__((section("version"), used)) = 0x40300;
#
# ./perf record -e ./test_probe_glob.c ls /
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# ./perf evlist
perf_bpf_probe:func_1
perf_bpf_probe:func
After changing "inlines=no" to "inlines=yes":
# ./perf record -e ./test_probe_glob.c ls /
...
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data ]
# ./perf evlist
perf_bpf_probe:func_3
perf_bpf_probe:func_2
perf_bpf_probe:func_1
perf_bpf_probe:func
# perf record -e ./test_probe_force.c usleep 1
Error: event "func" already exists.
Hint: Remove existing event by 'perf probe -d'
or force duplicates by 'perf probe -f'
or set 'force=yes' in BPF source.
event syntax error: './test_probe_force.c'
\___ Probe point exist. Try 'perf probe -d "*"' and set 'force=yes'
(add -v to see detail)
...
Then replace 'force=no' to 'force=yes':
# vim test_probe_force.c
# perf record -e ./test_probe_force.c usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data ]
# perf evlist
perf_bpf_probe:func_1
perf_bpf_probe:func
#
Wang Nan [Mon, 16 Nov 2015 12:10:06 +0000 (12:10 +0000)]
perf bpf: Allow attaching BPF programs to modules symbols
By extending the syntax of BPF object section names, this patch allows
users to attach BPF programs to symbols in modules. For example:
SEC("module=i915;"
"parse_cmds=i915_parse_cmds")
int parse_cmds(void *ctx)
{
return 1;
}
The implementation is very simple: like what 'perf probe' does, for module,
fill 'uprobe' field in 'struct perf_probe_event'. Other parts will be done
automatically.
Where, in section name of a program, before the main config string, we
can use 'key=value' style options. Now the only option key is "exec",
for uprobes.
Wang Nan [Mon, 16 Nov 2015 12:10:11 +0000 (12:10 +0000)]
perf bpf: Compile dwarf-regs.c if CONFIG_BPF_PROLOGUE is on
regs_query_register_offset() in dwarf-regs.c is required by BPF
prologue. This patch compiles it if CONFIG_BPF_PROLOGUE is on to avoid
build failure when CONFIG_BPF_PROLOGUE is on but CONFIG_DWARF is not
set.
Wang Nan [Mon, 16 Nov 2015 12:10:10 +0000 (12:10 +0000)]
perf bpf: Add BPF_PROLOGUE config options for further patches
If both LIBBPF and DWARF are detected, it is possible to create prologue
for eBPF programs to help them access kernel data. HAVE_BPF_PROLOGUE and
CONFIG_BPF_PROLOGUE are added as flags for this feature.
PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET is introduced in commit 63ab024a5b6f295ca17a293ad81b7c728f49a89a ("perf tools:
regs_query_register_offset() infrastructure"), which indicates that an
architecture supports converting name of a register to its offset in
'struct pt_regs'. Without this support, BPF_PROLOGUE should be turned
off.
Wang Nan [Mon, 16 Nov 2015 12:10:09 +0000 (12:10 +0000)]
bpf tools: Load a program with different instances using preprocessor
This patch is a preparation for BPF prologue support which allows
generating a series of BPF bytecode for fetching kernel data before
calling program code. With the newly introduced multiple instances
support, perf is able to create different prologues for different kprobe
points.
Before this patch, a bpf_program can be loaded into kernel only once,
and get the only resulting fd. What this patch does is to allow creating
and loading different variants of one bpf_program, then fetching their
fds.
Here we describe the basic idea in this patch. The detailed description
of the newly introduced APIs can be found in comments in the patch body.
The key of this patch is the new mechanism in bpf_program__load().
Instead of loading BPF program into kernel directly, it calls a
'pre-processor' to generate program instances which would be finally
loaded into the kernel based on the original code. To enable the
generation of multiple instances, libbpf passes an index to the
pre-processor so it know which instance is being loaded.
Pre-processor should be called from libbpf's user (perf) using
bpf_program__set_prep(). The number of instances and the relationship
between indices and the target instance should be clear when calling
bpf_program__set_prep().
To retrieve a fd for a specific instance of a program,
bpf_program__nth_fd() is introduced. It returns the resulting fd
according to index.
perf test: Fix build of BPF and LLVM on older glibc libraries
$ rpm -q glibc
glibc-2.12-1.166.el6_7.1.x86_64
<SNIP>
CC /tmp/build/perf/tests/llvm.o
cc1: warnings being treated as errors
tests/llvm.c: In function ‘test_llvm__fetch_bpf_obj’:
tests/llvm.c:53: error: declaration of ‘index’ shadows a global declaration
/usr/include/string.h:489: error: shadowed declaration is here
<SNIP>
CC /tmp/build/perf/tests/bpf.o
cc1: warnings being treated as errors
tests/bpf.c: In function ‘__test__bpf’:
tests/bpf.c:149: error: declaration of ‘index’ shadows a global declaration
/usr/include/string.h:489: error: shadowed declaration is here
<SNIP>
This cause an allmodconfig build failure, since our underlying
load-acquire implementation does not handle const types correctly:
include/net/sock.h: In function 'sk_state_load':
./arch/arm64/include/asm/barrier.h:71:3: error: read-only variable '___p1' used as 'asm' output
asm volatile ("ldarb %w0, %1" \
This patch fixes the problem by reusing the trick in READ_ONCE that
loads via a non-const member of an anonymous union. This has the
advantage of allowing us to use smp_load_acquire on packed structures
(e.g. arch_spinlock_t) as well as primitive types.
Mathias Nyman [Wed, 18 Nov 2015 08:48:22 +0000 (10:48 +0200)]
xhci: Fix a race in usb2 LPM resume, blocking U3 for usb2 devices
Clear device initiated resume variables once device is fully up and running
in U0 state.
Resume needs to be signaled for 20ms for usb2 devices before they can be
moved to U0 state.
An interrupt is triggered if a device initiates resume. As we handle the
event in interrupt context we can not sleep for 20ms, so we instead set
a resume flag, a timestamp, and start the roothub polling.
The roothub code will later move the port to U0 when it finds a port in
resume state with the resume flag set, and timestamp passed by 20ms.
A host initiated resume is however not done in interrupt context, and
host initiated resume code will directly signal resume, wait 20ms and then
move the port to U0.
These two codepaths can race, if we are in the middle of a host initated
resume, while sleeping for 20ms, we may handle a port event and find the
port in resume state. The port event handling code will assume the resume
was device initiated and set the resume flag and timestamp.
Root hub code will however not catch the port in resume state again as the
host initated resume code has already moved the port to U0.
The resume flag and timestamp will remain set for this port preventing port
from suspending again (LPM setting port to U3)
Fix this for now by always clearing the device initated resume parameters
once port is in U0
Lu Baolu [Wed, 18 Nov 2015 08:48:21 +0000 (10:48 +0200)]
usb: xhci: fix checking ep busy for CFC
Function ep_ring_is_processing() checks the dequeue pointer
in endpoint context to know whether an endpoint is busy with
processing TRBs. This is not correct since dequeue pointer
field in an endpoint context is only valid when the endpoint
is in Halted or Stopped states. This buggy code causes audio
noise when playing sound with USB headset connected to host
controllers which support CFC (one of xhci 1.1 features).
This patch should exist in stable kernel since v4.3.
Rajmohan Mani [Wed, 18 Nov 2015 08:48:20 +0000 (10:48 +0200)]
xhci: Workaround to get Intel xHCI reset working more reliably
Existing Intel xHCI controllers require a delay of 1 mS,
after setting the CMD_RESET bit in command register, before
accessing any HC registers. This allows the HC to complete
the reset operation and be ready for HC register access.
Without this delay, the subsequent HC register access,
may result in a system hang, very rarely.
Verified CherryView / Braswell platforms go through over
5000 warm reboot cycles (which was not possible without
this patch), without any xHCI reset hang.
Linus Torvalds [Wed, 18 Nov 2015 16:59:29 +0000 (08:59 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Assorted bug fixes, the mlock2 system call gets added, and one
improvement. The boot from dasd devices is now possible from a wider
range of devices"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: remove SALIPL loader
s390: wire up mlock2 system call
s390: remove g5 elf platform support
s390: avoid cache aliasing under z/VM and KVM
s390/sclp: _sclp_wait_int(): retain full PSW mask
s390/zcrypt: Fix initialisation when zcrypt is built-in
s390/zcrypt: Fix kernel crash on systems without AP bus support
s390: add support for ipl devices in subchannel sets > 0
s390/ipl: fix out of bounds access in scpdata_write
s390/pci_dma: improve debugging of errors during dma map
s390/pci_dma: handle dma table failures
s390/pci_dma: unify label of invalid translation table entries
s390/syscalls: remove system call number calculation
s390/cio: simplify css_generate_pgid
s390/diag: add a s390 prefix to the diagnose trace point
s390/head: fix error message on unsupported hardware
Linus Torvalds [Wed, 18 Nov 2015 16:43:29 +0000 (08:43 -0800)]
Merge tag 'hwmon-for-linus-v4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Fix build issues in scpi and ina2xx drivers, update scpi driver to
support recent firmware, and fix an uninitialized variable warning in
applesmc driver"
drm/i915: Consider SPLL as another shared pll, v2.
When diagnosing a unrelated bug for someone on irc, it would seem the hardware can
be brought up by the BIOS with the embedded displayport using the SPLL for spread spectrum.
Right now this is not handled well in i915, and it calculates the crtc needs to
be reprogrammed on the first modeset without SSC, but the SPLL itself was kept
active. Fix this by exposing SPLL as a shared pll that will not be returned
by intel_get_shared_dpll; you have to know it exists to use it.
Changes since v1:
- Create a separate dpll_hw_state.spll for spll, and use
separate pll functions for spll.
Laura Abbott [Thu, 12 Nov 2015 20:21:10 +0000 (12:21 -0800)]
arm64: Fix R/O permissions in mark_rodata_ro
The permissions in mark_rodata_ro trigger a build error
with STRICT_MM_TYPECHECKS. Fix this by introducing
PAGE_KERNEL_ROX for the same reasons as PAGE_KERNEL_RO.
From Ard:
"PAGE_KERNEL_EXEC has PTE_WRITE set as well, making the range
writeable under the ARMv8.1 DBM feature, that manages the
dirty bit in hardware (writing to a page with the PTE_RDONLY
and PTE_WRITE bits both set will clear the PTE_RDONLY bit in that case)"
Ard Biesheuvel [Mon, 16 Nov 2015 12:12:48 +0000 (13:12 +0100)]
arm64: crypto: reduce priority of core AES cipher
The asynchronous, merged implementations of AES in CBC, CTR and XTS
modes are preferred when available (i.e., when instantiating ablkciphers
explicitly). However, the synchronous core AES cipher combined with the
generic CBC mode implementation will produce a 'cbc(aes)' blkcipher that
is callable asynchronously as well. To prevent this implementation from
being used when the accelerated asynchronous implemenation is also
available, lower its priority to 250 (i.e., below the asynchronous
module's priority of 300).
Ard Biesheuvel [Tue, 17 Nov 2015 08:53:31 +0000 (09:53 +0100)]
arm64: use non-global mappings for UEFI runtime regions
As pointed out by Russell King in response to the proposed ARM version
of this code, the sequence to switch between the UEFI runtime mapping
and current's actual userland mapping (and vice versa) is potentially
unsafe, since it leaves a time window between the switch to the new
page tables and the TLB flush where speculative accesses may hit on
stale global TLB entries.
So instead, use non-global mappings, and perform the switch via the
ordinary ASID-aware context switch routines.
Mika Kuoppala [Tue, 17 Nov 2015 16:14:26 +0000 (18:14 +0200)]
drm/i915: Fix gpu frequency change tracing
With gen < 9 we have had always 50Mhz units as our hw
ratio. With gen >= 9 the hw ratio changed to 16.667Mhz (50/3).
The result was that our gpu frequency tracing started to output
values 3 times larger than expected due to hardcoded scaling
value. Fix this by using Use intel_gpu_freq() when generating Mhz
value from ratio for 'intel_gpu_freq_change' trace event.
Li Jun [Tue, 13 Oct 2015 10:23:31 +0000 (18:23 +0800)]
usb: chipidea: debug: disable usb irq while role switch
Since the ci->role will be set after the host role start is complete, there
will be nobody cared irq during start host if usb irq enabled. This error
can be reproduced on i.mx6 sololite EVK board by:
1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1
in dts.
2. boot up the board with ID cable and usb device connected.
3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role
4. echo host > /sys/kernel/debug/ci_hdrc.0/role
5. irq 212: nobody cared.
Peter Chen [Wed, 16 Sep 2015 01:35:06 +0000 (09:35 +0800)]
ARM: dts: imx27.dtsi: change the clock information for usb
For imx27, it needs three clocks to let the controller work,
the old code is wrong, and usbmisc has not included clock handling
code any more. Without this patch, it will cause below data
abort when accessing usbmisc registers.
usbcore: registered new interface driver usb-storage
Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600
pgd = c0004000
[f4424600] *pgd=10000452(bad)
Internal error: : 8 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089
Hardware name: Freescale i.MX27 (Device Tree Support)
task: c7832b60 ti: c783e000 task.ti: c783e000
PC is at usbmisc_imx27_init+0x4c/0xbc
LR is at usbmisc_imx27_init+0x40/0xbc
pc : [<c03cb5c0>] lr : [<c03cb5b4>] psr: 60000093
sp : c783fe08 ip : 00000000 fp : 00000000
r10: c0576434 r9 : 0000009c r8 : c7a773a0
r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0
r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: a0004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc783e190)
Stack: (0xc783fe08 to 0xc7840000)
Peter Chen [Wed, 16 Sep 2015 01:40:51 +0000 (09:40 +0800)]
usb: chipidea: imx: refine clock operations to adapt for all platforms
Some i.mx platforms need three clocks to let controller work, but
others only need one, refine clock operation to adapt for all
platforms, it fixes a regression found at i.mx27.
Ingo Molnar [Wed, 18 Nov 2015 05:56:48 +0000 (06:56 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Do not change the key of an object in a rbtree, this time it was
the one for DSOs lookup by its long_name, and the noticed symptom was
with 'perf buildid-list --with-hits' (Adrian Hunter)
- 'perf inject' is a pipe, events it doesn't touch should be passed
on, PERF_RECORD_LOST wasn't, fix it (Adrian Hunter)
- Make 'perf buildid-list' request event ordering, as it needs to
first get the mmap events to be able to mark wich DSOs had hits
(Adrian Hunter)
- Fix memory leaks on failure in 'perf probe' (Masami Hiramatsu, Wang Nan)
kernel-doc: Make it compatible with Perl versions below 5.12 again
Changeset 4d73270192ec('scripts/kernel-doc: Replacing highlights
hash by an array') broke compatibility of the kernel-doc script with
older versions of perl by using "keys ARRAY" syntax with is available
only on Perl 5.12 or newer, according with:
http://perldoc.perl.org/functions/keys.html
Restore backward compatibility by replacing "foreach my $k (keys ARRAY)"
by a C-like variant: "for (my $k = 0; $k < !ARRAY; $k++)"
Merge tag 'fixes-for-v4.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus
Felipe writes:
usb: fixes for v4.4-rc2
First round of fixes for this -rc cycle. We have the
usual set of miscellaneous fixes. The important
thing here is support for Intel Broxton SoC on dwc3,
some fixes for Rockchip SoCs on dwc2 and a fix on
dwc3 to let it report lower speeds than
USB_SPEED_SUPER.
1) Fix list tests in netfilter ingress support, from Florian Westphal.
2) Fix reversal of input and output interfaces in ingress hook
invocation, from Pablo Neira Ayuso.
3) We have a use after free in r8169, caught by Dave Jones, fixed by
Francois Romieu.
4) Splice use-after-free fix in AF_UNIX frmo Hannes Frederic Sowa.
5) Three ipv6 route handling bug fixes from Martin KaFai Lau:
a) Don't create clone routes not managed by the fib6 tree
b) Don't forget to check expiration of DST_NOCACHE routes.
c) Handle rt->dst.from == NULL properly.
6) Several AF_PACKET fixes wrt transport header setting and SKB
protocol setting, from Daniel Borkmann.
7) Fix thunder driver crash on shutdown, from Pavel Fedin.
8) Several Mellanox driver fixes (max MTU calculations, use of correct
DMA unmap in TX path, etc.) from Saeed Mahameed, Tariq Toukan, Doron
Tsur, Achiad Shochat, Eran Ben Elisha, and Noa Osherovich.
9) Several mv88e6060 DSA driver fixes (wrong bit definitions for
certain registers, etc.) from Neil Armstrong.
10) Make sure to disable preemption while updating per-cpu stats of ip
tunnels, from Jason A. Donenfeld.
11) Various ARM64 bpf JIT fixes, from Yang Shi.
12) Flush icache properly in ARM JITs, from Daniel Borkmann.
13) Fix masking of RX and TX interrupts in ravb driver, from Masaru
Nagai.
14) Fix netdev feature propagation for devices not implementing
->ndo_set_features(). From Nikolay Aleksandrov.
15) Big endian fix in vmxnet3 driver, from Shrikrishna Khare.
16) RAW socket code increments incorrect SNMP counters, fix from Ben
Cartwright-Cox.
17) IPv6 multicast SNMP counters are bumped twice, fix from Neil Horman.
18) Fix handling of VLAN headers on stacked devices when REORDER is
disabled. From Vlad Yasevich.
19) Fix SKB leaks and use-after-free in ipvlan and macvlan drivers, from
Sabrina Dubroca.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
MAINTAINERS: Update Mellanox's Eth NIC driver entries
net/core: revert "net: fix __netdev_update_features return.." and add comment
af_unix: take receive queue lock while appending new skb
rtnetlink: fix frame size warning in rtnl_fill_ifinfo
net: use skb_clone to avoid alloc_pages failure.
packet: Use PAGE_ALIGNED macro
packet: Don't check frames_per_block against negative values
net: phy: Use interrupts when available in NOLINK state
phy: marvell: Add support for 88E1540 PHY
arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS
macvlan: fix leak in macvlan_handle_frame
ipvlan: fix use after free of skb
ipvlan: fix leak in ipvlan_rcv_frame
vlan: Do not put vlan headers back on bridge and macvlan ports
vlan: Fix untag operations of stacked vlans with REORDER_HEADER off
via-velocity: unconditionally drop frames with bad l2 length
ipg: Remove ipg driver
dl2k: Add support for IP1000A-based cards
snmp: Remove duplicate OUTMCAST stat increment
net: thunder: Check for driver data in nicvf_remove()
...
Dan Carpenter [Wed, 4 Nov 2015 13:21:40 +0000 (16:21 +0300)]
drm/vc4: checking for NULL instead of IS_ERR
vc4_plane_init() returns an ERR_PTR on error, it doesn't return NULL.
This was obviously intended because the next lines call
PTR_ERR(primary_plane) already.
net/core: revert "net: fix __netdev_update_features return.." and add comment
This reverts commit 00ee59271777 ("net: fix __netdev_update_features return
on ndo_set_features failure")
and adds a comment explaining why it's okay to return a value other than
0 upon error. Some drivers might actually change flags and return an
error so it's better to fire a spurious notification rather than miss
these.
af_unix: take receive queue lock while appending new skb
While possibly in future we don't necessarily need to use
sk_buff_head.lock this is a rather larger change, as it affects the
af_unix fd garbage collector, diag and socket cleanups. This is too much
for a stable patch.
For the time being grab sk_buff_head.lock without disabling bh and irqs,
so don't use locked skb_queue_tail.
rtnetlink: fix frame size warning in rtnl_fill_ifinfo
Fix the following warning:
CC net/core/rtnetlink.o
net/core/rtnetlink.c: In function ‘rtnl_fill_ifinfo’:
net/core/rtnetlink.c:1308:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^
by splitting up the huge rtnl_fill_ifinfo into some smaller ones, so we
don't have the huge frame allocations at the same time.
Andrew Lunn [Mon, 16 Nov 2015 22:36:46 +0000 (23:36 +0100)]
net: phy: Use interrupts when available in NOLINK state
The NOLINK state will poll the phy once a second to see if the link
has come up. If the phy has an interrupt line, this polling can be
skipped, since the phy should interrupt when the link returns.
The 88E1540 can be found embedded in the Marvell 88E6352 switch. It
is compatible with the 88E1510, so add support for it, using the 88E1510 specific functions.
Yang Shi [Mon, 16 Nov 2015 22:35:35 +0000 (14:35 -0800)]
arm64: bpf: make BPF prologue and epilogue align with ARM64 AAPCS
Save and restore FP/LR in BPF prog prologue and epilogue, save SP to FP
in prologue in order to get the correct stack backtrace.
However, ARM64 JIT used FP (x29) as eBPF fp register, FP is subjected to
change during function call so it may cause the BPF prog stack base address
change too.
Use x25 to replace FP as BPF stack base register (fp). Since x25 is callee
saved register, so it will keep intact during function call.
It is initialized in BPF prog prologue when BPF prog is started to run
everytime. Save and restore x25/x26 in BPF prologue and epilogue to keep
them intact for the outside of BPF. Actually, x26 is unnecessary, but SP
requires 16 bytes alignment.
Sabrina Dubroca [Mon, 16 Nov 2015 21:54:20 +0000 (22:54 +0100)]
macvlan: fix leak in macvlan_handle_frame
Reset pskb in macvlan_handle_frame in case skb_share_check returned a
clone.
Fixes: 8a4eb5734e8d ("net: introduce rx_handler results and logic around that") Signed-off-by: Sabrina Dubroca <[email protected]> Signed-off-by: David S. Miller <[email protected]>
projects / linux.git / log