if cur_bpw <= 8 and xfer_len < 4 then the value of fthlv will be 1 and
SPI registers content may have been lost.
* If SPI data register is accessed as a 16-bit register and DSIZE <= 8bit,
better to select FTHLV = 2, 4, 6 etc
* If SPI data register is accessed as a 32-bit register and DSIZE > 8bit,
better to select FTHLV = 2, 4, 6 etc, while if DSIZE <= 8bit,
better to select FTHLV = 4, 8, 12 etc
Douglas Anderson [Thu, 17 Dec 2020 22:29:14 +0000 (14:29 -0800)]
spi: spi-geni-qcom: Print an error when we timeout setting the CS
If we're using geni to manage the chip select line (don't do it--use a
GPIO!) and we happen to get a timeout waiting for the chip select
command to be completed, no errors are printed even though things
might not be in the best shape. Let's add a print.
Douglas Anderson [Thu, 17 Dec 2020 22:29:13 +0000 (14:29 -0800)]
spi: spi-geni-qcom: Don't try to set CS if an xfer is pending
If we get a timeout sending then this happens:
spi_transfer_one_message()
->transfer_one() AKA spi_geni_transfer_one()
setup_fifo_xfer()
mas->cur_xfer = non-NULL
spi_transfer_wait() => TIMES OUT
if (msg->status != -EINPROGRESS)
goto out
if (ret != 0 ...)
spi_set_cs()
->set_cs AKA spi_geni_set_cs()
# mas->cur_xfer is non-NULL
The above happens _before_ the SPI core calls ->handle_err() AKA
handle_fifo_timeout().
Unfortunately that won't work so well on geni. If we got a timeout
transferring then it's likely that our interrupt handler is blocked,
but we need that same interrupt handler to run and the command channel
to be unblocked in order to adjust the chip select. Trying to set the
chip select doesn't crash us but ends up confusing our state machine
and leads to messages like: Premature done. rx_rem = 32 bpw8
Let's just drop the chip select request in this case. We can detect
the case because cur_xfer is non-NULL--it would have been set to NULL
in the interrupt handler if the previous transfer had finished. Sure,
we might leave the chip select in the wrong state but it's likely it
was going to fail anyway and this avoids getting the driver even more
confused about what it's doing.
The SPI core in general assumes that setting chip select is a simple
operation that doesn't fail. Yet another reason to just reconfigure
the chip select line as GPIOs.
Douglas Anderson [Thu, 17 Dec 2020 22:29:12 +0000 (14:29 -0800)]
spi: spi-geni-qcom: Fail new xfers if xfer/cancel/abort pending
If we got a timeout when trying to send an abort command then it means
that we just got 3 timeouts in a row:
1. The original timeout that caused handle_fifo_timeout() to be
called.
2. A one second timeout waiting for the cancel command to finish.
3. A one second timeout waiting for the abort command to finish.
SPI is clocked by the controller, so nothing (aside from a hardware
fault or a totally broken sequencer) should be causing the actual
commands to fail in hardware. However, even though the hardware
itself is not expected to fail (and it'd be hard to predict how we
should handle things if it did), it's easy to hit the timeout case by
simply blocking our interrupt handler from running for a long period
of time. Obviously the system is in pretty bad shape if a interrupt
handler is blocked for > 2 seconds, but there are certainly bugs (even
bugs in other unrelated drivers) that can make this happen.
Let's make things a bit more robust against this case. If we fail to
abort we'll set a flag and then we'll block all future transfers until
we have no more interrupts pending.
Douglas Anderson [Thu, 17 Dec 2020 22:29:11 +0000 (14:29 -0800)]
spi: spi-geni-qcom: Fix geni_spi_isr() NULL dereference in timeout case
In commit 7ba9bdcb91f6 ("spi: spi-geni-qcom: Don't keep a local state
variable") we changed handle_fifo_timeout() so that we set
"mas->cur_xfer" to NULL to make absolutely sure that we don't mess
with the buffers from the previous transfer in the timeout case.
Unfortunately, this caused the IRQ handler to dereference NULL in some
cases. One case:
geni_spi_isr()
spin_lock(mas->lock)
if (m_irq & M_RX_FIFO_WATERMARK_EN)
geni_spi_handle_rx()
mas->cur_xfer NULL dereference!
tl;dr: Seriously delayed interrupts for RX/TX can lead to timeout
handling setting mas->cur_xfer to NULL.
Let's check for the NULL transfer in the TX and RX cases and reset the
watermark or clear out the fifo respectively to put the hardware back
into a sane state.
NOTE: things still could get confused if we get timeouts all the way
through handle_fifo_timeout() and then start a new transfer because
interrupts from the old transfer / cancel / abort could still be
pending. A future patch will help this corner case.
Cc: Akash Asthana <[email protected]> Cc: Simon Glass <[email protected]> Cc: Gwendal Grignou <[email protected]> Cc: Douglas Anderson <[email protected]> Cc: Alexandru M Stan <[email protected]>
Stephen Boyd (3):
platform/chrome: cros_ec_spi: Don't overwrite spi::mode
platform/chrome: cros_ec_spi: Drop bits_per_word assignment
spi: spi-geni-qcom: Use the new method of gpio CS control
Stephen Boyd [Fri, 4 Dec 2020 19:35:40 +0000 (11:35 -0800)]
spi: spi-geni-qcom: Use the new method of gpio CS control
Let's set the 'use_gpio_descriptors' field so that we use the new way of
requesting the CS GPIOs in the core. This allows us to avoid having to
configure the CS pins in "output" mode with an 'output-enable' pinctrl
setting.
There isn't any need to overwrite the mode here in the driver with what
has been detected by the firmware, such as DT or ACPI. In fact, if we
use the SPI CS gpio descriptor feature we will overwrite the mode with
SPI_MODE_0 where it already contains SPI_MODE_0 and more importantly
SPI_CS_HIGH. Clearing the SPI_CS_HIGH bit causes the CS line to toggle
when the device is probed when it shouldn't change, confusing the driver
and making it fail to probe. Drop the assignment and let the spi core
take care of it.
Damien Le Moal [Sun, 6 Dec 2020 01:18:17 +0000 (10:18 +0900)]
spi: dw: Add support for the Canaan K210 SoC SPI
The Canaan Kendryte K210 RISC-V SoC includes a DW apb_ssi v4 controller
which is documented to have a 32 words deep TX and RX FIFO. The FIFO
length detection in spi_hw_init() correctly detects this value.
However, when the controller RX FIFO is filled up to 32 entries
(RXFLR = 32), an RX FIFO overrun error occurs. This likely due to a
hardware bug which can be avoided by force setting the fifo_len field of
struct dw_spi to 31.
Define the dw_spi_canaan_k210_init() function to force set fifo_len to
31 when the device node compatible string is "canaan,k210-spi".
Damien Le Moal [Sun, 6 Dec 2020 01:18:16 +0000 (10:18 +0900)]
spi: dw: Add support for 32-bits max xfer size
The Synopsis DesignWare DW_apb_ssi specifications version 3.23 onward
define a 32-bits maximum transfer size synthesis parameter
(SSI_MAX_XFER_SIZE=32) in addition to the legacy 16-bits configuration
(SSI_MAX_XFER_SIZE=16) for SPI controllers. When SSI_MAX_XFER_SIZE=32,
the layout of the ctrlr0 register changes, moving the data frame format
field from bits [3..0] to bits [16..20], and the RX/TX FIFO word size
can be up to 32-bits.
To support this new format, introduce the DW SPI capability flag
DW_SPI_CAP_DFS32 to indicate that a controller is configured with
SSI_MAX_XFER_SIZE=32. Since SSI_MAX_XFER_SIZE is a controller synthesis
parameter not accessible through a register, the detection of this
parameter value is done in spi_hw_init() by writing and reading the
ctrlr0 register and testing the value of bits [3..0]. These bits are
ignored (unchanged) for SSI_MAX_XFER_SIZE=16, allowing the detection.
If a DFS32 capable SPI controller is detected, the new field dfs_offset
in struct dw_spi is set to SPI_DFS32_OFFSET (16).
dw_spi_update_config() is modified to set the data frame size field at
the correct position is the CTRLR0 register, as indicated by the
dfs_offset field of the dw_spi structure.
The DW_SPI_CAP_DFS32 flag is also unconditionally set for SPI slave
controllers, e.g. controllers that have the DW_SPI_CAP_DWC_SSI
capability flag set. However, for these ssi controllers, the dfs_offset
field is set to 0 as before (as per specifications).
Finally, for any controller with the DW_SPI_CAP_DFS32 capability flag
set, dw_spi_add_host() extends the value of bits_per_word_mask from
16-bits to 32-bits. dw_reader() and dw_writer() are also modified to
handle 32-bits iTX/RX FIFO words.
Update the snps,dw-apb-ssi.yaml document to include the compatibility
string "canaan,k210-spi" compatible string for the Canaan Kendryte K210
RISC-V SoC DW apb_ssi V4 SPI controller.
Mark Brown [Mon, 7 Dec 2020 17:18:27 +0000 (17:18 +0000)]
Merge series "spi: atmel-quadspi: Fix AHB memory accesses" from Tudor Ambarus <[email protected]>:
Starting with the move of the atmel-quadspi driver under SPI,
the following error could be seen when mounting a 16MByte ubifs:
UBIFS error (ubi0:0 pid 1893): check_lpt_type.constprop.6: invalid type (15) in LPT node type
1/4 fixes AHB accesses. The rest of the patches are small optimizations.
Tested on both sama5d2 and sam9x60.
Tudor Ambarus (4):
spi: atmel-quadspi: Fix AHB memory accesses
spi: atmel-quadspi: Drop superfluous set of QSPI_IFR_APBTFRTYP_READ
spi: atmel-quadspi: Write QSPI_IAR only when needed
spi: atmel-quadspi: Move common code outside of if else
Lukas Wunner [Mon, 7 Dec 2020 08:17:17 +0000 (09:17 +0100)]
spi: atmel-quadspi: Fix use-after-free on unbind
atmel_qspi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Lukas Wunner [Mon, 7 Dec 2020 08:17:16 +0000 (09:17 +0100)]
spi: npcm-fiu: Disable clock in probe error path
If the call to devm_spi_register_master() fails on probe of the NPCM FIU
SPI driver, the clock "fiu->clk" is erroneously not unprepared and
disabled. Fix it.
Lukas Wunner [Mon, 7 Dec 2020 08:17:15 +0000 (09:17 +0100)]
spi: ar934x: Don't leak SPI master in probe error path
If the call to devm_spi_register_controller() fails on probe of the
Qualcomm Atheros AR934x/QCA95xx SPI driver, the spi_controller struct is
erroneously not freed. Fix by switching over to the new
devm_spi_alloc_master() helper.
Moreover, the controller's clock is enabled on probe but not disabled if
any of the subsequent probe steps fail.
Finally, there's an ordering issue in ar934x_spi_remove() wherein the
clock is disabled even though the controller is not yet unregistered.
It is unregistered after ar934x_spi_remove() by the devres framework.
As long as it is not unregistered, SPI transfers may still be ongoing
and disabling the clock may break them. It is not possible to use
devm_spi_register_controller() in this case, so move to the non-devm
variant.
All of these bugs have existed since the driver was first introduced,
so it seems fair to fix them together in a single commit.
Lukas Wunner [Mon, 7 Dec 2020 08:17:14 +0000 (09:17 +0100)]
spi: mt7621: Don't leak SPI master in probe error path
If the calls to device_reset() or devm_spi_register_controller() fail on
probe of the MediaTek MT7621 SPI driver, the spi_controller struct is
erroneously not freed. Fix by switching over to the new
devm_spi_alloc_master() helper.
Additionally, there's an ordering issue in mt7621_spi_remove() wherein
the spi_controller is unregistered after disabling the SYS clock.
The correct order is to call spi_unregister_controller() *before* this
teardown step because bus accesses may still be ongoing until that
function returns.
All of these bugs have existed since the driver was first introduced,
so it seems fair to fix them together in a single commit.
Lukas Wunner [Mon, 7 Dec 2020 08:17:13 +0000 (09:17 +0100)]
spi: mt7621: Disable clock in probe error path
Commit 702b15cb9712 ("spi: mt7621: fix missing clk_disable_unprepare()
on error in mt7621_spi_probe") sought to disable the SYS clock on probe
errors, but only did so for 2 of 3 potentially failing calls: The clock
needs to be disabled on failure of devm_spi_register_controller() as
well.
Moreover, the commit purports to fix a bug in commit cbd66c626e16 ("spi:
mt7621: Move SPI driver out of staging") but in reality the bug has
existed since the driver was first introduced.
Lukas Wunner [Mon, 7 Dec 2020 08:17:12 +0000 (09:17 +0100)]
media: netup_unidvb: Don't leak SPI master in probe error path
If the call to spi_register_master() fails on probe of the NetUP
Universal DVB driver, the spi_master struct is erroneously not freed.
Likewise, if spi_new_device() fails, the spi_controller struct is
not unregistered. Plug the leaks.
While at it, fix an ordering issue in netup_spi_release() wherein
spi_unregister_master() is called after fiddling with the IRQ control
register. The correct order is to call spi_unregister_master() *before*
this teardown step because bus accesses may still be ongoing until that
function returns.
Lukas Wunner [Mon, 7 Dec 2020 08:17:10 +0000 (09:17 +0100)]
spi: rb4xx: Don't leak SPI master in probe error path
If the calls to devm_clk_get(), devm_spi_register_master() or
clk_prepare_enable() fail on probe of the Mikrotik RB4xx SPI driver,
the spi_master struct is erroneously not freed.
Fix by switching over to the new devm_spi_alloc_master() helper.
Lukas Wunner [Mon, 7 Dec 2020 08:17:09 +0000 (09:17 +0100)]
spi: gpio: Don't leak SPI master in probe error path
If the call to devm_spi_register_master() fails on probe of the GPIO SPI
driver, the spi_master struct is erroneously not freed:
After allocating the spi_master, its reference count is 1. The driver
unconditionally decrements the reference count on unbind using a devm
action. Before calling devm_spi_register_master(), the driver
unconditionally increments the reference count because on success,
that function will decrement the reference count on unbind. However on
failure, devm_spi_register_master() does *not* decrement the reference
count, so the spi_master is leaked.
The issue was introduced by commits 8b797490b4db ("spi: gpio: Make sure
spi_master_put() is called in every error path") and 79567c1a321e ("spi:
gpio: Use devm_spi_register_master()"), which sought to plug leaks
introduced by 9b00bc7b901f ("spi: spi-gpio: Rewrite to use GPIO
descriptors") but missed this remaining leak.
The situation was later aggravated by commit d3b0ffa1d75d ("spi: gpio:
prevent memory leak in spi_gpio_probe"), which introduced a
use-after-free because it releases a reference on the spi_master if
devm_add_action_or_reset() fails even though the function already
does that.
Fix by switching over to the new devm_spi_alloc_master() helper.
Lukas Wunner [Mon, 7 Dec 2020 08:17:08 +0000 (09:17 +0100)]
spi: spi-mtk-nor: Don't leak SPI master in probe error path
If the call to devm_spi_register_controller() fails on probe of the
MediaTek SPI NOR driver, the spi_controller struct is erroneously not
freed.
Since commit a1daaa991ed1 ("spi: spi-mtk-nor: use dma_alloc_coherent()
for bounce buffer"), the same happens if the call to
dmam_alloc_coherent() fails.
Since commit 3bfd9103c7af ("spi: spi-mtk-nor: Add power management
support"), the same happens if the call to mtk_nor_enable_clk() fails.
Fix by switching over to the new devm_spi_alloc_master() helper.
Lukas Wunner [Mon, 7 Dec 2020 08:17:06 +0000 (09:17 +0100)]
spi: rpc-if: Fix use-after-free on unbind
rpcif_spi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Lukas Wunner [Mon, 7 Dec 2020 08:17:05 +0000 (09:17 +0100)]
spi: pxa2xx: Fix use-after-free on unbind
pxa2xx_spi_remove() accesses the driver's private data after calling
spi_unregister_controller() even though that function releases the last
reference on the spi_controller and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master/slave() helper
which keeps the private data accessible until the driver has unbound.
Lukas Wunner [Mon, 7 Dec 2020 08:17:04 +0000 (09:17 +0100)]
spi: spi-sh: Fix use-after-free on unbind
spi_sh_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Lukas Wunner [Mon, 7 Dec 2020 08:17:03 +0000 (09:17 +0100)]
spi: spi-qcom-qspi: Fix use-after-free on unbind
qcom_qspi_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.
Lukas Wunner [Mon, 7 Dec 2020 08:17:02 +0000 (09:17 +0100)]
spi: spi-geni-qcom: Fix use-after-free on unbind
spi_geni_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.
Moreover, since commit 1a9e489e6128 ("spi: spi-geni-qcom: Use OPP API to
set clk/perf state"), spi_geni_probe() leaks the spi_master allocation
if the calls to dev_pm_opp_set_clkname() or dev_pm_opp_of_add_table()
fail.
Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound and also
avoids the spi_master leak on probe.
Tudor Ambarus [Mon, 7 Dec 2020 13:59:59 +0000 (15:59 +0200)]
spi: atmel-quadspi: Move common code outside of if else
QSPI_IFR is set as the last QSPI Instruction Frame register
regardless of the sama5d2 or sam9x60 version of the IP. Move
the writing of QSPI_IFR outside of the IP specific code.
Tudor Ambarus [Mon, 7 Dec 2020 13:59:56 +0000 (15:59 +0200)]
spi: atmel-quadspi: Fix AHB memory accesses
Following error was seen when mounting a 16MByte ubifs:
UBIFS error (ubi0:0 pid 1893): check_lpt_type.constprop.6: invalid type (15) in LPT node type
QSPI_IFR.TFRTYP was not set correctly. When data transfer is enabled
and one wants to access the serial memory through AHB in order to:
- read in the serial memory, but not a memory data, for example
a JEDEC-ID, QSPI_IFR.TFRTYP must be written to '0' (both sama5d2
and sam9x60).
- read in the serial memory, and particularly a memory data,
TFRTYP must be written to '1' (both sama5d2 and sam9x60).
- write in the serial memory, but not a memory data, for example
writing the configuration or the QSPI_SR, TFRTYP must be written
to '2' for sama5d2 and to '0' for sam9x60.
- write in the serial memory in particular to program a memory data,
TFRTYP must be written to '3' for sama5d2 and to '1' for sam9x60.
Maxim Kochetkov [Tue, 1 Dec 2020 08:59:16 +0000 (11:59 +0300)]
spi: spi-fsl-dspi: Use max_native_cs instead of num_chipselect to set SPI_MCR
If cs-gpios property is used in devicetree then ctlr->num_chipselect value
may be changed by spi_get_gpio_descs().
So use ctlr->max_native_cs instead of ctlr->num_chipselect to set SPI_MCR
Rasmus Villemoes [Fri, 27 Nov 2020 15:29:47 +0000 (16:29 +0100)]
spi: fsl: fix use of spisel_boot signal on MPC8309
Commit 0f0581b24bd0 ("spi: fsl: Convert to use CS GPIO descriptors")
broke the use of the SPISEL_BOOT signal as a chip select on the
MPC8309.
pdata->max_chipselect, which becomes master->num_chipselect, must be
initialized to take into account the possibility that there's one more
chip select in use than the number of GPIO chip selects.
Linus Torvalds [Sun, 29 Nov 2020 19:19:26 +0000 (11:19 -0800)]
Merge tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two more places which invoke tracing from RCU disabled regions in the
idle path.
Similar to the entry path the low level idle functions have to be
non-instrumentable"
* tag 'locking-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
intel_idle: Fix intel_idle() vs tracing
sched/idle: Fix arch_cpu_idle() vs tracing
Linus Torvalds [Sun, 29 Nov 2020 19:06:57 +0000 (11:06 -0800)]
Merge tag 'irq-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Two fixes for irqchip drivers:
- Save and restore the GICV3 ITS state unconditionally on
suspend/resume to handle firmware which fails to do so.
- Use the correct index into the fwspec parameters to read the irq
trigger type in the EXIU chip driver"
* tag 'irq-urgent-2020-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Unconditionally save/restore the ITS state on suspend
irqchip/exiu: Fix the index of fwspec for IRQ type
Linus Torvalds [Sun, 29 Nov 2020 18:18:53 +0000 (10:18 -0800)]
Merge tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Borislav Petkov:
"More EFI fixes forwarded from Ard Biesheuvel:
- revert efivarfs kmemleak fix again - it was a false positive
- make CONFIG_EFI_EARLYCON depend on CONFIG_EFI explicitly so it does
not pull in other dependencies unnecessarily if CONFIG_EFI is not
set
- defer attempts to load SSDT overrides from EFI vars until after the
efivar layer is up"
* tag 'efi-urgent-for-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: EFI_EARLYCON should depend on EFI
efivarfs: revert "fix memory leak in efivarfs_create()"
efi/efivars: Set generic ops before loading SSDT
Linus Torvalds [Sun, 29 Nov 2020 18:08:17 +0000 (10:08 -0800)]
Merge tag 'x86_urgent_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A couple of urgent fixes which accumulated this last week:
- Two resctrl fixes to prevent refcount leaks when manipulating the
resctrl fs (Xiaochen Shen)
- Correct prctl(PR_GET_SPECULATION_CTRL) reporting (Anand K Mistry)
- A fix to not lose already seen MCE severity which determines
whether the machine can recover (Gabriele Paoloni)"
* tag 'x86_urgent_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Do not overwrite no_way_out if mce_end() fails
x86/speculation: Fix prctl() when spectre_v2_user={seccomp,prctl},ibpb
x86/resctrl: Add necessary kernfs_put() calls to prevent refcount leak
x86/resctrl: Remove superfluous kernfs_get() calls to prevent refcount leak
Linus Torvalds [Sat, 28 Nov 2020 23:53:30 +0000 (15:53 -0800)]
Merge tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I've collected a handful of fixes over the past few weeks:
- A fix to un-break the build-id argument to the vDSO build, which is
necessary for the LLVM linker.
- A fix to initialize the jump label subsystem, without which it (and
all the stuff that uses it) doesn't actually function.
- A fix to include <asm/barrier.h> from <vdso/processor.h>, without
which some drivers won't compile"
* tag 'riscv-for-linus-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: fix barrier() use in <vdso/processor.h>
RISC-V: Add missing jump label initialization
riscv: Explicitly specify the build id style in vDSO Makefile again
Linus Torvalds [Sat, 28 Nov 2020 18:35:05 +0000 (10:35 -0800)]
Merge tag 'perf-tools-fixes-for-v5.10-2020-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Fix die_entrypc() when DW_AT_ranges DWARF attribute not available
- Cope with broken DWARF (missing DW_AT_declaration) generated by some
recent gcc versions
- Do not generate CGROUP metadata events when not asked to in 'perf
record'
- Use proper CPU for shadow stats in 'perf stat'
- Update copy of libbpf's hashmap.c, silencing tools/perf build warning
- Fix return value in 'perf diff'
* tag 'perf-tools-fixes-for-v5.10-2020-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf probe: Change function definition check due to broken DWARF
perf probe: Fix to die_entrypc() returns error correctly
perf stat: Use proper cpu for shadow stats
perf record: Synthesize cgroup events only if needed
perf diff: Fix error return value in __cmd_diff()
perf tools: Update copy of libbpf's hashmap.c
Linus Torvalds [Fri, 27 Nov 2020 23:00:35 +0000 (15:00 -0800)]
Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures"
* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Linus Torvalds [Fri, 27 Nov 2020 22:48:03 +0000 (14:48 -0800)]
Merge tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
Linus Torvalds [Fri, 27 Nov 2020 22:38:02 +0000 (14:38 -0800)]
Merge tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
and CAN subtrees.
Current release - regressions:
- gro_cells: reduce number of synchronize_net() calls
- ch_ktls: release a lock before jumping to an error path
Current release - always broken:
- tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header
Previous release - regressions:
- net/tls: fix missing received data after fast remote close
- vsock/virtio: discard packets only when socket is really closed
- sock: set sk_err to ee_errno on dequeue from errq
- cxgb4: fix the panic caused by non smac rewrite
Previous release - always broken:
- tcp: fix corner cases around setting ECN with BPF selection of
congestion control
- tcp: fix race condition when creating child sockets from syncookies
on loopback interface
- usbnet: ipheth: fix connectivity with iOS 14
- tun: honor IOCB_NOWAIT flag
- net/packet: fix packet receive on L3 devices without visible hard
header
- devlink: Make sure devlink instance and port are in same net
namespace
- net: openvswitch: fix TTL decrement action netlink message format
- bonding: wait for sysfs kobject destruction before freeing struct
slave
- net: stmmac: fix upstream patch applied to the wrong context
- bnxt_en: fix return value and unwind in probe error paths
Misc:
- devlink: add extra layer of categorization to the reload stats uAPI
before it's released"
* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
ch_ktls: lock is not freed
net/tls: Protect from calling tls_dev_del for TLS RX twice
devlink: Make sure devlink instance and port are in same net namespace
devlink: Hold rtnl lock while reading netdev attributes
ptp: clockmatrix: bug fix for idtcm_strverscmp
enetc: Let the hardware auto-advance the taprio base-time of 0
gro_cells: reduce number of synchronize_net() calls
net: stmmac: fix incorrect merge of patch upstream
ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
Documentation: netdev-FAQ: suggest how to post co-dependent series
ibmvnic: enhance resetting status check during module exit
...
Linus Torvalds [Fri, 27 Nov 2020 22:06:23 +0000 (14:06 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes in the UFS driver: two are for power management
issues and the third is to fix a slew of problem in the sysfs code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Fix race between shutdown and runtime resume flow
scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE
scsi: ufs: Fix unexpected values from ufshcd_read_desc_param()
Linus Torvalds [Fri, 27 Nov 2020 20:42:13 +0000 (12:42 -0800)]
Merge tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few fixes for various warnings that accumulated over past two weeks:
- tree-checker: add missing return values for some errors
- lockdep fixes
- when reading qgroup config and starting quota rescan
- reverse order of quota ioctl lock and VFS freeze lock
- avoid accessing potentially stale fs info during device scan,
reported by syzbot
- add scope NOFS protection around qgroup relation changes
- check for running transaction before flushing qgroups
- fix tracking of new delalloc ranges for some cases"
* tag 'for-5.10-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix lockdep splat when enabling and disabling qgroups
btrfs: do nofs allocations when adding and removing qgroup relations
btrfs: fix lockdep splat when reading qgroup config on mount
btrfs: tree-checker: add missing returns after data_ref alignment checks
btrfs: don't access possibly stale fs_info data for printing duplicate device
btrfs: tree-checker: add missing return after error in root_item
btrfs: qgroup: don't commit transaction when we already hold the handle
btrfs: fix missing delalloc new bit for new delalloc ranges
Linus Torvalds [Fri, 27 Nov 2020 20:31:04 +0000 (12:31 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Two security issues and several small bug fixes. Things seem to have
stabilized for this release here.
Summary:
- Significant out of bounds access security issue in i40iw
- Fix misuse of mmu notifiers in hfi1
- Several errors in the register map/usage in hns
- Missing error returns in mthca"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Bugfix for memory window mtpt configuration
RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP
RDMA/hns: Fix wrong field of SRQ number the device supports
IB/hfi1: Ensure correct mm is used at all times
RDMA/i40iw: Address an mmap handler exploit in i40iw
IB/mthca: fix return value of error branch in mthca_init_cq()
Linus Torvalds [Fri, 27 Nov 2020 20:03:07 +0000 (12:03 -0800)]
Merge tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Because of a recent change in the core, NAND controller drivers
initializing the ECC engine too early in the probe path are broken.
Drivers should wait for the NAND device to be discovered and its
memory layout known before doing any ECC related initialization, so
instead of reverting the faulty change which is actually moving in the
right direction, let's fix the drivers directly: socrates, sharpsl,
r852, plat_nand, pasemi, tmio, txx9ndfmc, orion, mpc5121, lpc32xx_slc,
lpc32xx_mlc, fsmc, diskonchip, davinci, cs553x, au1550, ams-delta,
xway and gpio"
* tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()
mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip()
mtd: rawnand: r852: Move the ECC initialization to ->attach_chip()
mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()
mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()
mtd: rawnand: tmio: Move the ECC initialization to ->attach_chip()
mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()
mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()
mtd: rawnand: lpc32xx_slc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: lpc32xx_mlc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: fsmc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip()
mtd: rawnand: davinci: Move the ECC initialization to ->attach_chip()
mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip()
mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()
mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()
mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()
mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()
Linus Torvalds [Fri, 27 Nov 2020 19:29:53 +0000 (11:29 -0800)]
Merge tag 'spi-fix-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes for v5.10, one for the core which fixes some potential
races for controllers with multiple chip selects when configuration of
the chip select for one client device races with the addition and
initial setup of an additional client"
* tag 'spi-fix-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dw: Fix spi registration for controllers overriding CS
spi: imx: fix the unbalanced spi runtime pm management
spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts
spi: Take the SPI IO-mutex in the spi_setup() method
Linus Torvalds [Fri, 27 Nov 2020 19:25:23 +0000 (11:25 -0800)]
Merge tag 'media/v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull virtual digital TV driver fixes from Mauro Carvalho Chehab:
"A series of fixes for the new virtual digital TV driver (vidtv), which
is meant to help doing tests with the digital TV core and media
userspace apps and libraries.
They cover a series of issues I found on it, together with a few new
things in order to make it easier to detect problems at the DVB core"
* tag 'media/v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (36 commits)
media: vidtv.rst: add kernel-doc markups
media: vidtv.rst: update vidtv documentation
media: vidtv: simplify EIT write function
media: vidtv: simplify NIT write function
media: vidtv: simplify SDT write function
media: vidtv: cleanup PMT write table function
media: vidtv: cleanup PAT write function
media: vidtv: cleanup PSI table header function
media: vidtv: cleanup PSI descriptor write function
media: vidtv: simplify the crc writing logic
media: vidtv: simplify PSI write function
media: vidtv: add date to the current event
media: vidtv: fix service_id at SDT table
media: vidtv: fix service type
media: vidtv: add a PID entry for the NIT table
media: vidtv: properly fill EIT service_id
media: vidtv: fix the network ID range
media: vidtv: improve EIT data
media: vidtv: cleanup null packet initialization logic
media: vidtv: pre-initialize mux arrays
...
Linus Torvalds [Fri, 27 Nov 2020 19:19:49 +0000 (11:19 -0800)]
Merge tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Unfortunately this has a bit of thanksgiving stuffing in it, as it a
bit larger (at least the vc4 patches) than I like at this point in
time.
The main thing is it has a bunch of regressions fixes for reports in
the last couple of weeks, ast, nouveau and the amdgpu ttm init fix,
along with the usual selection of amdgpu and i915 fixes.
The vc4 fixes are a few but they are fixes and the nastiest one is a
fix for when you have a 2.4Ghz Wifi and a HDMI signal with a clock in
that range and there isn't enough shielding and interference happen
between the two, the fix adjusts the mode clock to try and avoid the
wifi channels in that case.
Hopefully you can merge this between turkey slices, and next week
should be quieter.
ast:
- LUT loading regression fix
nouveau:
- relocations regression fix
amdgpu:
- ttm init oops fix
- Runtime pm fix
- SI UVD suspend/resume fix
- HDCP fix for headless cards
- Sienna Cichlid golden register update
i915:
- Fix Perf/OA workaround register corruption (Lionel)
- Correct a comment statement in GVT (Yan)
- Fix GT enable/disable iterrupts, including a race condition that
prevented GPU to go idle (Chris)
- Free stale request on destroying the virtual engine (Chris)
exynos:
- config dependency fix
mediatek:
- unused var removal
- horizonal front/back porch formula fix
vc4:
- wifi and hdmi interference fix
- mode rejection fixes
- use after free fix
- cleanup some code"
* tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm: (28 commits)
drm/nouveau: fix relocations applying logic and a double-free
drm/ast: Reload gamma LUT after changing primary plane's color format
drm/amdgpu: Fix size calculation when init onchip memory
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/display: Avoid HDCP initialization in devices without output
drm/i915/gt: Free stale request on destroying the virtual engine
drm/i915/gt: Don't cancel the interrupt shadow too early
drm/i915/gt: Track signaled breadcrumbs outside of the breadcrumb spinlock
drm/amdgpu: fix a page fault
drm/amdgpu: fix SI UVD firmware validate resume fail
drm/amd/amdgpu: fix null pointer in runtime pm
drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission
drm/i915/gvt: correct a false comment of flag F_UNALIGN
drm/i915/perf: workaround register corruption in OATAILPTR
drm/vc4: kms: Don't disable the muxing of an active CRTC
drm/vc4: kms: Store the unassigned channel list in the state
drm/exynos: depend on COMMON_CLK to fix compile tests
drm/mediatek: dsi: Modify horizontal front/back porch byte formula
drm/vc4: hdmi: Disable Wifi Frequencies
dt-bindings: display: Add a property to deal with WiFi coexistence
...
Jakub Kicinski [Fri, 27 Nov 2020 19:13:39 +0000 (11:13 -0800)]
Merge tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-27
The first patch is by me and target the gs_usb driver and fixes the endianess
problem with candleLight firmware.
Another patch by me for the mcp251xfd driver add sanity checking to bail out if
no IRQ is configured.
The next three patches target the m_can driver. A patch by me removes the
hardcoded IRQF_TRIGGER_FALLING from the request_threaded_irq() as this clashes
with the trigger level specified in the DT. Further a patch by me fixes the
nominal bitiming tseg2 min value for modern m_can cores. Pankaj Sharma's patch
add support for cores version 3.3.x.
The last patch by Oliver Hartkopp is for af_can and converts a WARN() into a
pr_warn(), which is triggered by the syzkaller. It was able to create a
situation where the closing of a socket runs simultaneously to the notifier
call chain for removing the CAN network device in use.
* tag 'linux-can-fixes-for-5.10-20201127' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
====================
Linus Torvalds [Fri, 27 Nov 2020 19:09:13 +0000 (11:09 -0800)]
Merge tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi fixes: two bug-fixes and three model specific quirks
- fixes for misc other drivers: two bug-fixes and three model specific
quirks
* tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet
platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet
platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC
platform/x86: toshiba_acpi: Fix the wrong variable assignment
platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
platform/x86: thinkpad_acpi: Whitelist P15 firmware for dual fan control
platform/x86: thinkpad_acpi: Send tablet mode switch at wakeup time
platform/x86: thinkpad_acpi: Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
platform/x86: thinkpad_acpi: Do not report SW_TABLET_MODE on Yoga 11e
platform/x86: thinkpad_acpi: add P1 gen3 second fan support
Willem de Bruijn [Thu, 26 Nov 2020 15:12:20 +0000 (10:12 -0500)]
sock: set sk_err to ee_errno on dequeue from errq
When setting sk_err, set it to ee_errno, not ee_origin.
Commit f5f99309fa74 ("sock: do not set sk_err in
sock_dequeue_err_skb") disabled updating sk_err on errq dequeue,
which is correct for most error types (origins):
- sk->sk_err = err;
Commit 38b257938ac6 ("sock: reset sk_err when the error queue is
empty") reenabled the behavior for IMCP origins, which do require it:
+ if (icmp_next)
+ sk->sk_err = SKB_EXT_ERR(skb_next)->ee.ee_origin;
Paolo Abeni [Thu, 26 Nov 2020 14:17:53 +0000 (15:17 +0100)]
mptcp: fix NULL ptr dereference on bad MPJ
If an msk listener receives an MPJ carrying an invalid token, it
will zero the request socket msk entry. That should later
cause fallback and subflow reset - as per RFC - at
subflow_syn_recv_sock() time due to failing hmac validation.
Since commit 4cf8b7e48a09 ("subflow: introduce and use
mptcp_can_accept_new_subflow()"), we unconditionally dereference
- in mptcp_can_accept_new_subflow - the subflow request msk
before performing hmac validation. In the above scenario we
hit a NULL ptr dereference.
Address the issue doing the hmac validation earlier.
Linus Torvalds [Fri, 27 Nov 2020 19:04:13 +0000 (11:04 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix alignment of the new HYP sections
- Fix GICR_TYPER access from userspace
S390:
- do not reset the global diag318 data for per-cpu reset
- do not mark memory as protected too early
- fix for destroy page ultravisor call
x86:
- fix for SEV debugging
- fix incorrect return code
- fix for 'noapic' with PIC in userspace and LAPIC in kernel
- fix for 5-level paging"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
KVM: x86: Fix split-irqchip vs interrupt injection window request
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
MAINTAINERS: Update email address for Sean Christopherson
MAINTAINERS: add uv.c also to KVM/s390
s390/uv: handle destroy page legacy interface
KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace
KVM: SVM: fix error return code in svm_create_vcpu()
KVM: SVM: Fix offset computation bug in __sev_dbg_decrypt().
KVM: arm64: Correctly align nVHE percpu data
KVM: s390: remove diag318 reset code
KVM: s390: pv: Mark mm as protected after the set secure parameters and improve cleanup
Eelco Chaudron [Tue, 24 Nov 2020 12:34:44 +0000 (07:34 -0500)]
net: openvswitch: fix TTL decrement action netlink message format
Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.
When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.
Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.
* tag 'powerpc-5.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix allnoconfig build since uaccess flush
powerpc/64s/exception: KVM Fix for host DSI being taken in HPT guest MMU context
powerpc: Drop -me200 addition to build flags
KVM: PPC: Book3S HV: XIVE: Fix possible oops when accessing ESB page
powerpc/64s: Fix KVM system reset handling when CONFIG_PPC_PSERIES=y
powerpc/32s: Use relocation offset when setting early hash table
Linus Torvalds [Fri, 27 Nov 2020 18:44:59 +0000 (10:44 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are relating to our handling of access/dirty bits,
where our low-level page-table helpers could lead to stale young
mappings and loss of the dirty bit in some cases (the latter has not
been observed in practice, but could happen when clearing "soft-dirty"
if we enabled that). These were posted as part of a larger series, but
the rest of that is less urgent and needs a v2 which I'll get to
shortly.
In other news, we've now got a set of fixes to resolve the
lockdep/tracing problems that have been plaguing us for a while, but
they're still a bit "fresh" and I plan to send them to you next week
after we've got some more confidence in them (although initial CI
results look good).
Summary:
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM
is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
Linus Torvalds [Fri, 27 Nov 2020 18:41:19 +0000 (10:41 -0800)]
Merge tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"Here's another round of IOMMU fixes for -rc6 consisting mainly of a
bunch of independent driver fixes. Thomas agreed for me to take the
x86 'tboot' fix here, as it fixes a regression introduced by a vt-d
change.
- Fix intel iommu driver when running on devices without VCCAP_REG
- Fix swiotlb and "iommu=pt" interaction under TXT (tboot)
- Fix missing return value check during device probe()
- Fix probe ordering for Qualcomm SMMU implementation
- Ensure page-sized mappings are used for AMD IOMMU buffers with SNP
RMP"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
iommu/vt-d: Don't read VCCAP register unless it exists
x86/tboot: Don't disable swiotlb when iommu is forced on
iommu: Check return of __iommu_attach_device()
arm-smmu-qcom: Ensure the qcom_scm driver has finished probing
iommu/amd: Enforce 4k mapping for certain IOMMU data structures
Linus Torvalds [Fri, 27 Nov 2020 18:38:36 +0000 (10:38 -0800)]
Merge tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- do not lose trailing newline in pr_cont() calls
- two trivial fixes for a dead store and a config description
* tag 'printk-for-5.10-rc6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: finalize records with trailing newlines
printk: remove unneeded dead-store assignment
init/Kconfig: Fix CPU number in LOG_CPU_MAX_BUF_SHIFT description
Masami Hiramatsu [Fri, 27 Nov 2020 05:48:55 +0000 (14:48 +0900)]
perf probe: Change function definition check due to broken DWARF
Since some gcc generates a broken DWARF which lacks DW_AT_declaration
attribute from the subprogram DIE of function prototype.
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97060)
So, in addition to the DW_AT_declaration check, we also check the
subprogram DIE has DW_AT_inline or actual entry pc.
# perf test vfs_getname
78: Use vfs_getname probe to get syscall args filenames : FAILED!
79: Check open filename arg using perf trace + vfs_getname : FAILED!
81: Add vfs_getname probe to get syscall args filenames : FAILED!
#
After:
# perf test vfs_getname
78: Use vfs_getname probe to get syscall args filenames : Ok
79: Check open filename arg using perf trace + vfs_getname : Ok
81: Add vfs_getname probe to get syscall args filenames : Ok
#
Masami Hiramatsu [Fri, 27 Nov 2020 05:48:46 +0000 (14:48 +0900)]
perf probe: Fix to die_entrypc() returns error correctly
Fix die_entrypc() to return error correctly if the DIE has no
DW_AT_ranges attribute. Since dwarf_ranges() will treat the case as an
empty ranges and return 0, we have to check it by ourselves.
Namhyung Kim [Fri, 27 Nov 2020 04:14:03 +0000 (13:14 +0900)]
perf stat: Use proper cpu for shadow stats
Currently perf stat shows some metrics (like IPC) for defined events.
But when no aggregation mode is used (-A option), it shows incorrect
values since it used a value from a different cpu.
Namhyung Kim [Fri, 27 Nov 2020 05:43:56 +0000 (14:43 +0900)]
perf record: Synthesize cgroup events only if needed
It didn't check the tool->cgroup_events bit which is set when the
--all-cgroups option is given. Without it, samples will not have cgroup
info so no reason to synthesize.
We can check the PERF_RECORD_CGROUP records after running perf record
*WITHOUT* the --all-cgroups option:
7a078d2d18801bba ("libbpf, hashmap: Fix undefined behavior in hash_bits")
That don't entail any changes in tools/perf.
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.
Gabriele Paoloni [Fri, 27 Nov 2020 16:18:15 +0000 (16:18 +0000)]
x86/mce: Do not overwrite no_way_out if mce_end() fails
Currently, if mce_end() fails, no_way_out - the variable denoting
whether the machine can recover from this MCE - is determined by whether
the worst severity that was found across the MCA banks associated with
the current CPU, is of panic severity.
However, at this point no_way_out could have been already set by
mca_start() after looking at all severities of all CPUs that entered the
MCE handler. If mce_end() fails, check first if no_way_out is already
set and, if so, stick to it, otherwise use the local worst value.
The guest triggering this crashes. Note, this happens with the traditional
MMU and EPT enabled, not with the newly introduced TDP MMU. Turns out,
there was a subtle change in the above mentioned commit. Previously,
walk_shadow_page_get_mmio_spte() was setting 'root' to 'iterator.level'
which is returned by shadow_walk_init() and this equals to
'vcpu->arch.mmu->shadow_root_level'. Now, get_mmio_spte() sets it to
'int root = vcpu->arch.mmu->root_level'.
The difference between 'root_level' and 'shadow_root_level' on CPUs
supporting 5-level page tables is that in some case we don't want to
use 5-level, in particular when 'cpuid_maxphyaddr(vcpu) <= 48'
kvm_mmu_get_tdp_level() returns '4'. In case upper layer is not used,
the corresponding SPTE will fail '__is_rsvd_bits_set()' check.
Serge Semin [Fri, 27 Nov 2020 14:46:11 +0000 (17:46 +0300)]
spi: dw-bt1: Fix undefined devm_mux_control_get symbol
I mistakenly added the select attributes to the SPI_DW_BT1_DIRMAP config
instead of having them defined in SPI_DW_BT1. If the kernel doesn't have
the MULTIPLEXER and MUX_MMIO configs manually enabled and the
SPI_DW_BT1_DIRMAP config hasn't been selected, Baikal-T1 SPI device will
always fail to be probed by the driver. Fix that and the error reported by
the test robot:
>> ld.lld: error: undefined symbol: devm_mux_control_get
>>> referenced by spi-dw-bt1.c
>>> spi/spi-dw-bt1.o:(dw_spi_bt1_sys_init) in archive drivers/built-in.a
by moving the MULTIPLEXER/MUX_MMIO configs selection to the SPI_DW_BT1
config.
Paolo Bonzini [Fri, 27 Nov 2020 08:18:20 +0000 (09:18 +0100)]
KVM: x86: Fix split-irqchip vs interrupt injection window request
kvm_cpu_accept_dm_intr and kvm_vcpu_ready_for_interrupt_injection are
a hodge-podge of conditions, hacked together to get something that
more or less works. But what is actually needed is much simpler;
in both cases the fundamental question is, do we have a place to stash
an interrupt if userspace does KVM_INTERRUPT?
In userspace irqchip mode, that is !vcpu->arch.interrupt.injected.
Currently kvm_event_needs_reinjection(vcpu) covers it, but it is
unnecessarily restrictive.
In split irqchip mode it's a bit more complicated, we need to check
kvm_apic_accept_pic_intr(vcpu) (the IRQ window exit is basically an INTACK
cycle and thus requires ExtINTs not to be masked) as well as
!pending_userspace_extint(vcpu). However, there is no need to
check kvm_event_needs_reinjection(vcpu), since split irqchip keeps
pending ExtINT state separate from event injection state, and checking
kvm_cpu_has_interrupt(vcpu) is wrong too since ExtINT has higher
priority than APIC interrupts. In fact the latter fixes a bug:
when userspace requests an IRQ window vmexit, an interrupt in the
local APIC can cause kvm_cpu_has_interrupt() to be true and thus
kvm_vcpu_ready_for_interrupt_injection() to return false. When this
happens, vcpu_run does not exit to userspace but the interrupt window
vmexits keep occurring. The VM loops without any hope of making progress.
we realize two things. First, thanks to the previous patch the complex
conditional can reuse !kvm_cpu_has_extint(vcpu). Second, the interrupt
window request in vcpu_enter_guest()
should be kept in sync with kvm_vcpu_ready_for_interrupt_injection():
it is unnecessary to ask the processor for an interrupt window
if we would not be able to return to userspace. Therefore,
kvm_cpu_accept_dm_intr(vcpu) is basically !kvm_cpu_has_extint(vcpu)
ANDed with the existing check for masked ExtINT. It all makes sense:
- we can accept an interrupt from userspace if there is a place
to stash it (and, for irqchip split, ExtINTs are not masked).
Interrupts from userspace _can_ be accepted even if right now
EFLAGS.IF=0.
- in order to tell userspace we will inject its interrupt ("IRQ
window open" i.e. kvm_vcpu_ready_for_interrupt_injection), both
KVM and the vCPU need to be ready to accept the interrupt.
Paolo Bonzini [Fri, 27 Nov 2020 07:53:52 +0000 (08:53 +0100)]
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
Centralize handling of interrupts from the userspace APIC
in kvm_cpu_has_extint and kvm_cpu_get_extint, since
userspace APIC interrupts are handled more or less the
same as ExtINTs are with split irqchip. This removes
duplicated code from kvm_cpu_has_injectable_intr and
kvm_cpu_has_interrupt, and makes the code more similar
between kvm_cpu_has_{extint,interrupt} on one side
and kvm_cpu_get_{extint,interrupt} on the other.
Arnd Bergmann [Fri, 27 Nov 2020 12:18:40 +0000 (13:18 +0100)]
Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
John Ogness [Thu, 26 Nov 2020 11:48:36 +0000 (12:54 +0106)]
printk: finalize records with trailing newlines
Any record with a trailing newline (LOG_NEWLINE flag) cannot
be continued because the newline has been stripped and will
not be visible if the message is appended. This was already
handled correctly when committing in log_output() but was
not handled correctly when committing in log_store().
Oliver Hartkopp [Thu, 26 Nov 2020 19:21:40 +0000 (20:21 +0100)]
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
To detect potential bugs in CAN protocol implementations (double removal of
receiver entries) a WARN() statement has been used if no matching list item was
found for removal.
The fault injection issued by syzkaller was able to create a situation where
the closing of a socket runs simultaneously to the notifier call chain for
removing the CAN network device in use.
This case is very unlikely in real life but it doesn't break anything.
Therefore we just replace the WARN() statement with pr_warn() to preserve the
notification for the CAN protocol development.
Pankaj Sharma [Thu, 26 Nov 2020 04:51:42 +0000 (10:21 +0530)]
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
Add support for mcan bit timing and control mode according to bosch mcan IP
version 3.3.0. The mcan version read from the Core Release field of CREL
register would be 33. Accordingly the properties are to be set for mcan v3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid
register values for "Nominal Time segment after sample point (NTSEG2)" are from
1 to 127. As the hardware uses a value of one more than the programmed value,
mean tseg2_min is 2.
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
The threaded IRQ handler is used for the tcan4x5x driver only. The IRQ pin of
the tcan4x5x controller is active low, so better not use IRQF_TRIGGER_FALLING
when requesting the IRQ. As this can result in missing interrupts.
Further, if the device tree specified the interrupt as "IRQ_TYPE_LEVEL_LOW",
unloading and reloading of the driver results in the following error during
ifup:
| irq: type mismatch, failed to map hwirq-31 for gpio@20a8000!
| tcan4x5x spi1.1: m_can device registered (irq=0, version=32)
| tcan4x5x spi1.1 can2: TCAN4X5X successfully initialized.
| tcan4x5x spi1.1 can2: failed to request interrupt
This patch fixes the problem by removing the IRQF_TRIGGER_FALLING from the
request_threaded_irq().
Dave Airlie [Thu, 26 Nov 2020 23:39:39 +0000 (09:39 +1000)]
Merge tag 'drm-misc-fixes-2020-11-26' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
A bunch of fixes for vc4 fixing some coexistence issue between wifi and
HDMI, unsupported modes, and vblank timeouts, a fix for ast to reload
the gamma LUT after changing the plane format and a double-free fix for
nouveau
Dave Airlie [Thu, 26 Nov 2020 23:21:10 +0000 (09:21 +1000)]
Merge tag 'exynos-drm-fixes-for-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One bug fix
. Add COMMON_CLK dependency to fix a build error below,
/usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/exynos/exynos_mixer.o: in function `mixer_bind':
exynos_mixer.c:(.text+0x958): undefined reference to `clk_set_parent'
projects / linux.git / log