During the testing of Gnome on Qualcomm Robotics platform screen
corruption has been observed. Lowering GPU's highest_bank_bit from 14 to
13 seems to fix the screen corruption.
Note, the MDSS and DPU drivers use HBB=1 (which maps to the
highest_bank_bit = 14). So this change merely works around the UBWC
swizzling issue on this platform until the real cause is found.
Fixes: e7fc9398e608 ("drm/msm/a6xx: Add A610 support") Signed-off-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/573838/ Signed-off-by: Rob Clark <[email protected]>
Rob Clark [Wed, 31 Jan 2024 15:08:54 +0000 (07:08 -0800)]
drm/msm/gem: Fix double resv lock aquire
Since commit 79e2cf2e7a19 ("drm/gem: Take reservation lock for vmap/vunmap
operations"), the resv lock is already held in the prime vmap path, so
don't try to grab it again.
v2: This applies to vunmap path as well
v3: Fix fixes commit
Fixes: 79e2cf2e7a19 ("drm/gem: Take reservation lock for vmap/vunmap operations") Signed-off-by: Rob Clark <[email protected]> Acked-by: Christian König <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/576642/
Dmitry Baryshkov [Fri, 15 Dec 2023 01:32:22 +0000 (03:32 +0200)]
drm/msm/mdss: specify cfg bandwidth for SDM670
Lower the requested CFG bus bandwidth for the SDM670 platform. The
default value is 153600 kBps, which is twice as big as required by the
platform according to the vendor kernel.
Abhinav Kumar [Wed, 17 Jan 2024 19:41:09 +0000 (11:41 -0800)]
drm/msm/dpu: check for valid hw_pp in dpu_encoder_helper_phys_cleanup
The commit 8b45a26f2ba9 ("drm/msm/dpu: reserve cdm blocks for writeback
in case of YUV output") introduced a smatch warning about another
conditional block in dpu_encoder_helper_phys_cleanup() which had assumed
hw_pp will always be valid which may not necessarily be true.
Lets fix the other conditional block by making sure hw_pp is valid
before dereferencing it.
Kuogee Hsieh [Wed, 17 Jan 2024 21:13:30 +0000 (13:13 -0800)]
drm/msm/dp: return correct Colorimetry for DP_TEST_DYNAMIC_RANGE_CEA case
MSA MISC0 bit 1 to 7 contains Colorimetry Indicator Field.
dp_link_get_colorimetry_config() returns wrong colorimetry value
in the DP_TEST_DYNAMIC_RANGE_CEA case in the current implementation.
Hence fix this problem by having dp_link_get_colorimetry_config()
return defined CEA RGB colorimetry value in the case of
DP_TEST_DYNAMIC_RANGE_CEA.
Changes in V2:
-- drop retrieving colorimetry from colorspace
-- drop dr = link->dp_link.test_video.test_dyn_range assignment
Changes in V3:
-- move defined MISCr0a Colorimetry vale to dp_reg.h
-- rewording commit title
-- rewording commit text to more precise describe this patch
Kuogee Hsieh [Wed, 10 Jan 2024 20:18:51 +0000 (12:18 -0800)]
drm/msms/dp: fixed link clock divider bits be over written in BPC unknown case
Since the value of DP_TEST_BIT_DEPTH_8 is already left shifted, in the
BPC unknown case, the additional shift causes spill over to the other
bits of the [DP_CONFIGURATION_CTRL] register.
Fix this by changing the return value of dp_link_get_test_bits_depth()
in the BPC unknown case to (DP_TEST_BIT_DEPTH_8 >> DP_TEST_BIT_DEPTH_SHIFT).
Randy Dunlap [Sun, 31 Dec 2023 06:08:23 +0000 (22:08 -0800)]
drm/msm/dpu: fix kernel-doc warnings
Correct all kernel-doc warnings in dpu_encoder.c and dpu_rm.c:
dpu_encoder.c:212: warning: Excess struct member 'crtc_kickoff_cb' description in 'dpu_encoder_virt'
dpu_encoder.c:212: warning: Excess struct member 'crtc_kickoff_cb_data' description in 'dpu_encoder_virt'
dpu_encoder.c:212: warning: Excess struct member 'debugfs_root' description in 'dpu_encoder_virt'
dpu_rm.c:35: warning: Excess struct member 'hw_res' description in 'dpu_rm_requirements'
dpu_rm.c:208: warning: No description found for return value of '_dpu_rm_get_lm_peer'
drm/msm/dp: call dp_display_get_next_bridge() during probe
The funcion dp_display_get_next_bridge() can return -EPROBE_DEFER if the
next bridge is not (yet) available. However returning -EPROBE_DEFER from
msm_dp_modeset_init() is not ideal. This leads to -EPROBE return from
component_bind, which can easily result in -EPROBE_DEFR loops.
Dmitry Baryshkov [Wed, 13 Dec 2023 00:57:28 +0000 (02:57 +0200)]
drm/msm/dpu: move CSC tables to dpu_hw_util.c
Move CSC tables out of the header file to fix following kind of warnings:
In file included from drivers/gpu/drm/msm/disp/dpu1/dpu_hwio.h:8,
from drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.c:5:
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:54:33: warning: ‘dpu_csc10_rgb2yuv_601l’ defined but not used [-Wunused-const-variable=]
54 | static const struct dpu_csc_cfg dpu_csc10_rgb2yuv_601l = {
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:39:33: warning: ‘dpu_csc10_YUV2RGB_601L’ defined but not used [-Wunused-const-variable=]
39 | static const struct dpu_csc_cfg dpu_csc10_YUV2RGB_601L = {
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h:24:33: warning: ‘dpu_csc_YUV2RGB_601L’ defined but not used [-Wunused-const-variable=]
24 | static const struct dpu_csc_cfg dpu_csc_YUV2RGB_601L = {
| ^~~~~~~~~~~~~~~~~~~~
Paloma Arellano [Tue, 12 Dec 2023 23:10:58 +0000 (15:10 -0800)]
drm/msm/dpu: Add mutex lock in control vblank irq
Add a mutex lock to control vblank irq to synchronize vblank
enable/disable operations happening from different threads to prevent
race conditions while registering/unregistering the vblank irq callback.
v4: -Removed vblank_ctl_lock from dpu_encoder_virt, so it is only a
parameter of dpu_encoder_phys.
-Switch from atomic refcnt to a simple int counter as mutex has
now been added
v3: Mistakenly did not change wording in last version. It is done now.
v2: Slightly changed wording of commit message
Abhinav Kumar [Tue, 12 Dec 2023 20:52:51 +0000 (12:52 -0800)]
drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output
Reserve CDM blocks for writeback if the format of the output fb
is YUV. At the moment, the reservation is done only for writeback
but can easily be extended by relaxing the checks once other
interfaces are ready to output YUV.
changes in v3:
- squash CDM disable during encoder cleanup into this change
changes in v2:
- use needs_cdm from topology struct
- drop fb related checks from atomic_mode_set()
Abhinav Kumar [Tue, 12 Dec 2023 20:52:49 +0000 (12:52 -0800)]
drm/msm/dpu: add an API to setup the CDM block for writeback
Add an API dpu_encoder_helper_phys_setup_cdm() which can be used by
the writeback encoder to setup the CDM block.
Currently, this is defined and used within the writeback's physical
encoder layer however, the function can be modified to be used to setup
the CDM block even for non-writeback interfaces.
Until those modifications are planned and made, keep it local to
writeback.
changes in v3:
- call bind_pingpong_blk() directly as disable() is dropped
- add dpu_csc10_rgb2yuv_601l to dpu_hw_util.h and use it
- fix kbot error on the function doc
- document that dpu_encoder_helper_phys_setup_cdm() doesn't handle
DPU_CHROMA_H1V2
changes in v2:
- add the RGB2YUV CSC matrix to dpu util as needed by CDM
- use dpu_hw_get_csc_cfg() to get and program CSC
- drop usage of setup_csc_data() and setup_cdwn() cdm ops
as they both have been merged into enable()
- drop reduntant hw_cdm and hw_pp checks
Abhinav Kumar [Tue, 12 Dec 2023 20:52:45 +0000 (12:52 -0800)]
drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block
CDM block comes with its own set of registers and operations
which can be done. In-line with other hardware blocks, this
change adds the dpu_hw_cdm abstraction for the CDM block.
changes in v4:
- used FIELD_PREP() for dpu_hw_cdm_setup_cdwn() operations
- change to lowercase hex in dpu_hw_cdm_bind_pingpong_blk()
- move disable assignment inside else in dpu_hw_cdm_bind_pingpong_blk()
changes in v3:
- fix commit text from sub-blk to blk for CDM
- fix kbot issue for missing static for dpu_hw_cdm_enable()
- fix kbot issue for incorrect documentation style
- add more documentation for enums and struct in dpu_hw_cdm.h
- drop "enable" parameter from bind_pingpong_blk() as we can
just use PINGPONG_NONE for disable cases
- drop unnecessary bit operation for zero value of cdm_cfg
changes in v2:
- replace bit magic with relevant defines
- use drmm_kzalloc instead of kzalloc/free
- some formatting fixes
- inline _setup_cdm_ops()
- protect bind_pingpong_blk with core_rev check
- drop setup_csc_data() and setup_cdwn() ops as they
are merged into enable()
Abhinav Kumar [Tue, 12 Dec 2023 20:52:43 +0000 (12:52 -0800)]
drm/msm/dpu: add cdm blocks to sc7280 dpu_hw_catalog
Add CDM blocks to the sc7280 dpu_hw_catalog to support
YUV format output from writeback block.
changes in v3:
- change the comment from sub-blk to clk for CDM
changes in v2:
- remove explicit zero assignment for features
- move sc7280_cdm to dpu_hw_catalog from the sc7280
catalog file as its definition can be re-used
Abhinav Kumar [Tue, 12 Dec 2023 20:52:42 +0000 (12:52 -0800)]
drm/msm/dpu: move csc matrices to dpu_hw_util
Since the type and usage of CSC matrices is spanning across DPU
lets introduce a helper to the dpu_hw_util to return the CSC
corresponding to the request type. This will help to add more
supported CSC types such as the RGB to YUV one which is used in
the case of CDM.
changes in v3:
- drop the extra wrapper and export the matrices directly
Abhinav Kumar [Tue, 12 Dec 2023 20:52:41 +0000 (12:52 -0800)]
drm/msm/dpu: fix writeback programming for YUV cases
For YUV cases, setting the required format bits was missed
out in the register programming. Lets fix it now in preparation
of adding YUV formats support for writeback.
changes in v2:
- dropped the fixes tag as its not a fix but adding
new functionality
Abhinav Kumar [Tue, 12 Dec 2023 20:52:39 +0000 (12:52 -0800)]
drm/msm/dpu: add formats check for writeback encoder
In preparation for adding more formats to dpu writeback add
format validation to it to fail any unsupported formats.
changes in v4:
- change the failure message of the API
drm_atomic_helper_check_wb_connector_state() to a generic
one in case it checks more errors later and moreoever it
already has debug message to indicate its failure
- change the corresponding DPU_ERROR to DPU_DEBUG in-line with
other atomic_check failure messages
changes in v3:
- rebase on top of msm-next
- replace drm_atomic_helper_check_wb_encoder_state() with
drm_atomic_helper_check_wb_connector_state() due to the
rebase
changes in v2:
- correct some grammar in the commit text
Dmitry Baryshkov [Mon, 11 Dec 2023 14:54:40 +0000 (17:54 +0300)]
drm/msm/dpu: remove extra drm_encoder_cleanup from the error path
The drmm handler will perform drm_encoder_cleanup() for us. Moreover if
we call drm_encoder_cleanup() manually, the drmm_encoder_alloc_release()
will spawn warnings at drivers/gpu/drm/drm_encoder.c:214. Drop these
extra drm_encoder_cleanup() calls.
Gitlab runner can cache git repository, including the unfinished rebase
merge status. New CI job will come as a fresh checkout, however this
will not destroy the unfinished rebase, failing our build script.
Destroy the unfinished rebase state.
Rob Clark [Tue, 21 Nov 2023 00:38:50 +0000 (16:38 -0800)]
drm/exec: Pass in initial # of objects
In cases where the # is known ahead of time, it is silly to do the table
resize dance.
Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Christian König <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/568338/
Rob Clark [Tue, 21 Nov 2023 00:38:48 +0000 (16:38 -0800)]
drm/msm/gem: Split out submit_unpin_objects() helper
Untangle unpinning from unlock/unref loop. The unpin only happens in
error paths so it is easier to decouple from the normal unlock path.
Since we never have an intermediate state where a subset of buffers
are pinned (ie. we never bail out of the pin or unpin loops) we can
replace the bo state flag bit with a global flag in the submit.
Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/568335/
Rob Clark [Tue, 21 Nov 2023 00:38:47 +0000 (16:38 -0800)]
drm/msm/gem: Don't queue job to sched in error cases
We shouldn't be running the job in error cases. This also avoids having
to think too hard about where the objs get unpinned (and if necessary,
the resv takes over tracking that the obj is busy).. ie. error cases it
always happens synchronously, and normal cases it happens from scheduler
job_run() callback.
Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/568331/
Rob Clark [Tue, 21 Nov 2023 00:38:46 +0000 (16:38 -0800)]
drm/msm/gem: Remove submit_unlock_unpin_bo()
The only point it is called is before pinning objects, so the "unpin"
part of the name is fiction. Just remove it and call submit_cleanup_bo()
directly.
Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/568330/
Rob Clark [Tue, 21 Nov 2023 00:38:45 +0000 (16:38 -0800)]
drm/msm/gem: Remove "valid" tracking
This was a small optimization for pre-soft-pin userspace. But mesa
switched to soft-pin nearly 5yrs ago. So lets drop the optimization
and simplify the code.
Signed-off-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/568328/
Bjorn Andersson [Fri, 1 Dec 2023 00:26:41 +0000 (16:26 -0800)]
drm/msm/adreno: Fix A680 chip id
The only A680 referenced from DeviceTree is patch level 1, which since
commit '90b593ce1c9e ("drm/msm/adreno: Switch to chip-id for identifying
GPU")' isn't a known chip id.
Correct the chip id to allow the A680 to be recognized again.
Fixes: 90b593ce1c9e ("drm/msm/adreno: Switch to chip-id for identifying GPU") Signed-off-by: Bjorn Andersson <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/569839/ Signed-off-by: Rob Clark <[email protected]>
Connor Abbott [Thu, 7 Dec 2023 21:30:48 +0000 (21:30 +0000)]
drm/msm: Add param for the highest bank bit
This parameter is programmed by the kernel and influences the tiling
layout of images. Exposing it to userspace will allow it to tile/untile
images correctly without guessing what value the kernel programmed, and
allow us to change it in the future without breaking userspace.
Signed-off-by: Connor Abbott <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/571181/ Signed-off-by: Rob Clark <[email protected]>
drm/vkms: move wb's atomic_check from encoder to connector
As the renamed drm_atomic_helper_check_wb_connector_state() now accepts
drm_writeback_connector as the first argument (instead of drm_encoder),
move the VKMS writeback atomic_check from drm_encoder_helper_funcs to
drm_connector_helper_funcs. Also drop the vkms_wb_encoder_helper_funcs,
which have become empty now.
The drm_atomic_helper_check_wb_encoder_state() function doesn't use
encoder for anything other than getting the drm_device instance. The
function's description talks about checking the writeback connector
state, not the encoder state. Moreover, there is no such thing as an
encoder state, encoders generally do not have a state on their own.
Rename the function to drm_atomic_helper_check_wb_connector_state()
and change arguments to drm_writeback_connector and drm_atomic_state.
Neil Armstrong [Thu, 7 Dec 2023 16:37:18 +0000 (17:37 +0100)]
drm/msm/dp: Add DisplayPort controller for SM8650
The Qualcomm SM8650 platform comes with a DisplayPort controller
with a different base offset than the previous SM8550 SoC,
add support for this in the DisplayPort driver.
Document the DisplayPort controller found in the Qualcomm SM8650 SoC,
the Controller base addresses and layout differ and thus cannot use
the SM8350 compatible as fallback.
Rob Herring [Thu, 7 Dec 2023 16:25:00 +0000 (10:25 -0600)]
drm/bridge: aux-hpd: Replace of_device.h with explicit include
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. Soon the implicit includes are going to be removed.
of_device.h isn't needed, but of.h is for of_node_put().
Rodrigo Vivi [Fri, 1 Dec 2023 04:21:54 +0000 (23:21 -0500)]
drm/doc/rfc: Move userptr integration and vm_bind to the 'completed' section
The must-have part of the documentation was already added to the existing
/gpu/drm-vm-bind-async. The other extra discussion around GPUVM helpers
are currently active in the community. None of those discussion should
block Xe since documentation, specially around locking was completed in
a community consensus.
Rodrigo Vivi [Fri, 1 Dec 2023 04:21:52 +0000 (23:21 -0500)]
drm/doc/rfc: Mark drm_scheduler as completed
Current drm-xe-next doesn't have any drm/scheduler patch that is not
already accepted in drm-misc-next. This completed this goal with
the consensus of how the drm/scheduler fits to the fw scheduling and
the relationship between drm_gpu_scheduler and drm_sched_entity.
Matthew Brost [Fri, 1 Dec 2023 04:21:51 +0000 (23:21 -0500)]
drm/doc/rfc: Mark long running workload as complete.
No DRM scheduler changes required, drivers just return NULL in run_job
vfunc.
The rough consensus is that no helper or extra scaffolding is needed
around long-running jobs and no further changes to drm-scheduler.
At least for now. Other drivers that currently do long-running workloads
have no plat to use drm-scheduler. Besides, the current consensus is
that this solution of simply returning NULL to the run_job function should
work without extra code duplication or complication.
On top of that, this item was already a non-blocking one for upstreaming Xe,
so let's move that to the 'Completed' section and revisit the long-running
solution as a community after Xe is integrated in DRM.
encoder->funcs entry might be NULL, so check it first before calling its
methods. This fixes NULL pointer dereference observed on Rasberry Pi
3b/4b boards.
drm/bridge: Return NULL instead of plain 0 in drm_dp_hpd_bridge_register() stub
sparse complains:
drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c: note: in included file:
include/drm/bridge/aux-bridge.h:29:16: sparse: sparse: Using plain integer as NULL pointer
usb: typec: qcom-pmic-typec: Only select DRM_AUX_HPD_BRIDGE with OF
CONFIG_DRM_AUX_HPD_BRIDGE depends on CONFIG_OF but that dependency is
not included when CONFIG_TYPEC_QCOM_PMIC selects it, resulting in a
Kconfig warning when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && OF [=n]
Selected by [m]:
- TYPEC_QCOM_PMIC [=m] && USB_SUPPORT [=y] && TYPEC [=m] && TYPEC_TCPM [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) && (DRM [=m] || DRM [=m]=n) && DRM_BRIDGE [=y]
Only select CONFIG_DRM_AUX_HPD_BRIDGE with both CONFIG_DRM_BRIDGE and
CONFIG_OF to clear up the warning.
usb: typec: nb7vpq904m: Only select DRM_AUX_BRIDGE with OF
CONFIG_DRM_AUX_BRIDGE depends on CONFIG_OF but that dependency is not
included when CONFIG_TYPEC_MUX_NB7VPQ904M selects it, resulting in a
Kconfig warning when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_AUX_BRIDGE
Depends on [n]: HAS_IOMEM [=y] && DRM_BRIDGE [=y] && OF [=n]
Selected by [y]:
- TYPEC_MUX_NB7VPQ904M [=y] && USB_SUPPORT [=y] && TYPEC [=y] && I2C [=y] && (DRM [=y] || DRM [=y]=n) && DRM_BRIDGE [=y]
Only select CONFIG_DRM_AUX_BRIDGE with both CONFIG_DRM_BRIDGE and
CONFIG_OF to clear up the warning.
After reading the code, I think this is what happens:
We have a DSI host defined in the device tree and a DSI peripheral under
that host (i.e. an i2c device using the DSI as data bus doesn't exhibit
this behavior).
The host driver calls mipi_dsi_host_register(), which causes (via a few
functions) mipi_dsi_device_add() to be called for the DSI peripheral. So
now we have a DSI device under the host, but attach hasn't been called.
Normally the probing of the devices continues, and eventually the DSI
peripheral's driver will call mipi_dsi_attach(), attaching the
peripheral.
However, if the host driver's probe encounters an error after calling
mipi_dsi_host_register(), and before the peripheral has called
mipi_dsi_attach(), the host driver will do cleanups and return an error
from its probe function. The cleanups include calling
mipi_dsi_host_unregister().
mipi_dsi_host_unregister() will call two functions for all its DSI
peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister().
The latter makes sense, as the device exists, but the former may be
wrong as attach has not necessarily been done.
To fix this, track the attached state of the peripheral, and only detach
from mipi_dsi_host_unregister() if the peripheral was attached.
Note that I have only tested this with a board with an i2c DSI
peripheral, not with a "pure" DSI peripheral.
However, slightly related, the unregister machinery still seems broken.
E.g. if the DSI host driver is unbound, it'll detach and unregister the
DSI peripherals. After that, when the DSI peripheral driver unbound
it'll call detach either directly or using the devm variant, leading to
a crash. And probably the driver will crash if it happens, for some
reason, to try to send a message via the DSI bus.
Tomi Valkeinen [Fri, 3 Nov 2023 13:14:04 +0000 (15:14 +0200)]
drm/framebuffer: Fix use of uninitialized variable
smatch reports:
drivers/gpu/drm/drm_framebuffer.c:654 drm_mode_getfb2_ioctl() error: uninitialized symbol 'ret'.
'ret' is possibly not set when there are no errors, causing the error
above. I can't say if that ever happens in real-life, but in any case I
think it is good to initialize 'ret' to 0.
Tomi Valkeinen [Fri, 3 Nov 2023 13:14:03 +0000 (15:14 +0200)]
drm/drm_file: fix use of uninitialized variable
smatch reports:
drivers/gpu/drm/drm_file.c:967 drm_show_memory_stats() error: uninitialized symbol 'supported_status'.
'supported_status' is only set in one code path. I'm not familiar with
the code to say if that path will always be ran in real life, but
whether that is the case or not, I think it is good to initialize
'supported_status' to 0 to silence the warning (and possibly fix a bug).
Dan Carpenter [Wed, 6 Dec 2023 15:05:15 +0000 (18:05 +0300)]
drm/bridge: nxp-ptn3460: simplify some error checking
The i2c_master_send/recv() functions return negative error codes or
they return "len" on success. So the error handling here can be written
as just normal checks for "if (ret < 0) return ret;". No need to
complicate things.
Btw, in this code the "len" parameter can never be zero, but even if
it were, then I feel like this would still be the best way to write it.
Donald Robson [Mon, 4 Dec 2023 15:13:37 +0000 (15:13 +0000)]
drm/imagination: Removed unused functions in pvr_fw_trace
Fixing the warning below due to an unused file level vtable. Removing
only this causes additional warnings for the now unused functions, so
I've removed those too.
>> drivers/gpu/drm/imagination/pvr_fw_trace.c:205:37: warning: 'pvr_fw_trace_group_mask_fops' defined but not used [-Wunused-const-variable=]
205 | static const struct file_operations pvr_fw_trace_group_mask_fops = {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/simpledrm: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/ofdrm: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/solomon: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/shmobile: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/loongson: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
drm/amdgpu: Do not include <drm/drm_plane_helper.h>
Remove unnecessary include statements for <drm/drm_plane_helper.h>.
The file contains helpers for non-atomic code and should not be
required by most drivers. No functional changes.
On sc7280 there are two clk bits for WB2: vbif_cli and clk_ctrl. While
programming the VBIF params of WB, the driver should be toggling the
former bit, while the sc7180_mdp, sc7280_mdp and sm8250_mdp structs
list the latter one.
Correct that to ensure proper programming sequence for WB2 on these
platforms.
The AGP subsystem supports a user-space interface via /dev/agpgart. It
is only enabled with DRM support for mode setting in user space. (i.e.,
CONFIG_DRM_LEGACY). All of that DRM code has been removed and the option
will go away. Hence remove the AGP frontend.
Modern DRM drivers with kernel mode setting handle AGP support internally.
drm: Remove locking for legacy ioctls and DRM_UNLOCKED
Modern DRM drivers acquire ioctl locks by themselves. Legacy ioctls
for user-space mode setting used to acquire drm_global_mutex. After
removing the ioctl entry points, also remove the locking code. The only
legacy ioctl without global locking was VBLANK_WAIT, which has been
removed as well. Hence remove the related DRM_UNLOCKED flag.
Remove all hooks and calls into code for user-space mode setting from
the DRM core. Without the drivers and ioctl entry points, none of this
is required any longer.
drm: Remove the legacy DRM_IOCTL_MODESET_CTL ioctl
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
Invoking DRM_IOCTL_MODESET_CTL is different from the other legacy
ioctl ops as it returns 0 even without CONFIG_DRM_LEGACY set. From the
original commit 29935554b384 ("drm: Disallow DRM_IOCTL_MODESET_CTL for
KMS drivers") it is not apparent how or why the operation differs from
the others. It is likely just an oversight in commit 61ae227032e7
("drm: allow removal of legacy codepaths (v4.1)"), which allowed
disabling leagacy ioctls in the first place. Still keep this removal
separate from the other ioctls to allow an easy revert, if necessary.
DRM drivers with user-space mode setting have been removed in Linux
v6.3. [1] Now remove the ioctl entry points for these drivers. Invoking
any of the ioctl ops will unconditionally return -EINVAL to user space.
This has already been the behavior for kernels without CONFIG_DRM_LEGACY
set.
drm/msm/dpu: use drmm-managed allocation for dpu_encoder_virt
It is incorrect to use devm-managed memory allocations for DRM data
structures exposed to userspace. They should use drmm_ allocations.
Change struct dpu_encoder allocation to use drmm_encoder_alloc(). This
removes the need to perform any actions on encoder destruction.
drm/msm/dpu: remove QoS teardown on plane destruction
There is little point in disabling QoS on plane destruction: it happens
during DPU device destruction process, after which there will be no
running planes.
projects / linux.git / log