In the rare cases when the device resources are exhausted it is likely
that the rehash delayed work will fail. An error message will be printed
whenever this happens which can be overwhelming considering the fact
that the work is per-region and that there can be hundreds of regions.
mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash
The rehash delayed work migrates filters from one region to another
according to the number of available credits.
The migrated from region is destroyed at the end of the work if the
number of credits is non-negative as the assumption is that this is
indicative of migration being complete. This assumption is incorrect as
a non-negative number of credits can also be the result of a failed
migration.
The destruction of a region that still has filters referencing it can
result in a use-after-free [1].
Fix by not destroying the region if migration failed.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230
Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858
mlxsw: spectrum_acl_tcam: Fix possible use-after-free during activity update
The rule activity update delayed work periodically traverses the list of
configured rules and queries their activity from the device.
As part of this task it accesses the entry pointed by 'ventry->entry',
but this entry can be changed concurrently by the rehash delayed work,
leading to a use-after-free [1].
Fix by closing the race and perform the activity query under the
'vregion->lock' mutex.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140
Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181
mlxsw: spectrum_acl_tcam: Fix race during rehash delayed work
The purpose of the rehash delayed work is to reduce the number of masks
(eRPs) used by an ACL region as the eRP bank is a global and limited
resource.
This is done in three steps:
1. Creating a new set of masks and a new ACL region which will use the
new masks and to which the existing filters will be migrated to. The
new region is assigned to 'vregion->region' and the region from which
the filters are migrated from is assigned to 'vregion->region2'.
2. Migrating all the filters from the old region to the new region.
3. Destroying the old region and setting 'vregion->region2' to NULL.
Only the second steps is performed under the 'vregion->lock' mutex
although its comments says that among other things it "Protects
consistency of region, region2 pointers".
This is problematic as the first step can race with filter insertion
from user space that uses 'vregion->region', but under the mutex.
Fix by holding the mutex across the entirety of the delayed work and not
only during the second step.
mlxsw: spectrum_acl_tcam: Fix race in region ID allocation
Region identifiers can be allocated both when user space tries to insert
a new tc filter and when filters are migrated from one region to another
as part of the rehash delayed work.
There is no lock protecting the bitmap from which these identifiers are
allocated from, which is racy and leads to bad parameter errors from the
device's firmware.
Fix by converting the bitmap to IDA which handles its own locking. For
consistency, do the same for the group identifiers that are part of the
same structure.
Hyunwoo Kim [Mon, 22 Apr 2024 09:37:17 +0000 (05:37 -0400)]
net: openvswitch: Fix Use-After-Free in ovs_ct_exit
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal
of ovs_ct_limit_exit, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Daniel Golle [Sun, 21 Apr 2024 00:08:31 +0000 (01:08 +0100)]
net: phy: mediatek-ge-soc: follow netdev LED trigger semantics
Only blink if the link is up on a LED which is programmed to also
indicate link-status.
Otherwise, if both LEDs are in use to indicate different speeds, the
resulting blinking being inverted on LEDs which aren't switched on at
a specific speed is quite counter-intuitive.
Also make sure that state left behind by reset or the bootloader is
recognized correctly including the half-duplex and full-duplex bits as
well as the (unsupported by Linux netdev trigger semantics) link-down
bit.
Fixes: c66937b0f8db ("net: phy: mediatek-ge-soc: support PHY LEDs") Signed-off-by: Daniel Golle <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Hyunwoo Kim [Mon, 22 Apr 2024 09:39:30 +0000 (05:39 -0400)]
net: gtp: Fix Use-After-Free in gtp_dellink
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal
of gtp_dellink, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 94dc550a5062 ("gtp: fix an use-after-free in ipv4_pdp_find()") Signed-off-by: Hyunwoo Kim <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Hyunwoo Kim [Mon, 22 Apr 2024 09:33:40 +0000 (05:33 -0400)]
tcp: Fix Use-After-Free in tcp_ao_connect_init
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal
of tcp_ao_connect_init, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Eric Dumazet [Sun, 21 Apr 2024 19:38:28 +0000 (19:38 +0000)]
net: usb: ax88179_178a: stop lying about skb->truesize
Some usb drivers try to set small skb->truesize and break
core networking stacks.
In this patch, I removed one of the skb->truesize overide.
I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path")
Eric Dumazet [Sun, 21 Apr 2024 17:52:48 +0000 (17:52 +0000)]
net: fix sk_memory_allocated_{add|sub} vs softirqs
Jonathan Heathcote reported a regression caused by blamed commit
on aarch64 architecture.
x86 happens to have irq-safe __this_cpu_add_return()
and __this_cpu_sub(), but this is not generic.
I think my confusion came from "struct sock" argument,
because these helpers are called with a locked socket.
But the memory accounting is per-proto (and per-cpu after
the blamed commit). We might cleanup these helpers later
to directly accept a "struct proto *proto" argument.
Switch to this_cpu_add_return() and this_cpu_xchg()
operations, and get rid of preempt_disable()/preempt_enable() pairs.
Fast path becomes a bit faster as a result :)
Many thanks to Jonathan Heathcote for his awesome report and
investigations.
Jakub Kicinski [Sat, 20 Apr 2024 02:08:26 +0000 (19:08 -0700)]
tools: ynl: don't ignore errors in NLMSG_DONE messages
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
The dev_tracker is added to ax25_cb in ax25_bind(). When the
ax25 device is detaching, the dev_tracker of ax25_cb should be
deallocated in ax25_kill_by_device() instead of the dev_tracker
of ax25_dev. The log reported by ref_tracker is shown below:
Paul Geurts [Thu, 18 Apr 2024 19:25:38 +0000 (21:25 +0200)]
NFC: trf7970a: disable all regulators on removal
During module probe, regulator 'vin' and 'vdd-io' are used and enabled,
but the vdd-io regulator overwrites the 'vin' regulator pointer. During
remove, only the vdd-io is disabled, as the vin regulator pointer is not
available anymore. When regulator_put() is called during resource
cleanup a kernel warning is given, as the regulator is still enabled.
Store the two regulators in separate pointers and disable both the
regulators on module remove.
Current maintainer Douglas Miller has left IBM and no replacement has
been assigned for the driver. The eHEA hardware was last used on
IBM POWER7 systems, the last of which reached end-of-support at the
end of 2020.
net: dsa: mv88e6xx: fix supported_interfaces setup in mv88e6250_phylink_get_caps()
With the recent PHYLINK changes requiring supported_interfaces to be set,
MV88E6250 family switches like the 88E6020 fail to probe - cmode is
never initialized on these devices, so mv88e6250_phylink_get_caps() does
not set any supported_interfaces flags.
Instead of a cmode, on 88E6250 we have a read-only port mode value that
encodes similar information. There is no reason to bother mapping port
mode to the cmodes of other switch models; instead we introduce a
mv88e6250_setup_supported_interfaces() that is called directly from
mv88e6250_phylink_get_caps().
David S. Miller [Mon, 22 Apr 2024 13:13:19 +0000 (14:13 +0100)]
Merge branch 'bnxt_en-aer-fixes'
Michael Chan says:
====================
bnxt_en: AER fixes
This patchset fixes issues in the AER recovery logic. The first patch
refactors the code to make a shutdown function available for AER fatal
errors. The second patch fixes the AER fatal recovery logic. The
third patch fixes the health register logic to fix AER recovery failure
for the new P7 chips.
====================
Michael Chan [Fri, 19 Apr 2024 18:34:49 +0000 (11:34 -0700)]
bnxt_en: Fix error recovery for 5760X (P7) chips
During error recovery, such as AER fatal error slot reset, we call
bnxt_try_map_fw_health_reg() to try to get access to the health
register to determine the firmware state. Fix
bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly
and set up the health register.
Fixes: a432a45bdba4 ("bnxt_en: Define basic P7 macros") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
We do not support two simultaneous recoveries so check for reset
flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further.
When the pci channel state is pci_channel_io_frozen, the PCIe link
can not be trusted so we disable the traffic immediately and stop
BAR access by calling bnxt_fw_fatal_close(). BAR access after
AER fatal error can cause an NMI.
Fixes: f75d9a0aa967 ("bnxt_en: Re-write PCI BARs after PCI fatal error.") Signed-off-by: Vikas Gupta <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Hangbin Liu [Fri, 19 Apr 2024 08:02:00 +0000 (16:02 +0800)]
bridge/br_netlink.c: no need to return void function
br_info_notify is a void function. There is no need to return.
Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.") Signed-off-by: Hangbin Liu <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Alex Elder [Sun, 21 Apr 2024 19:44:58 +0000 (14:44 -0500)]
mailmap: add entries for Alex Elder
Define my kernel.org address to be the canonical one, and add mailmap
entries for the various addresses (including typos) that have been
used over the years.
Jakub Kicinski [Sat, 20 Apr 2024 03:43:17 +0000 (20:43 -0700)]
Merge branch 'mlxsw-fixes'
Petr Machata says:
====================
mlxsw: Fixes
This patchset fixes the following issues:
- During driver de-initialization the driver unregisters the EMAD
response trap by setting its action to DISCARD. However the manual
only permits TRAP and FORWARD, and future firmware versions will
enforce this.
In patch #1, suppress the error message by aligning the driver to the
manual and use a FORWARD (NOP) action when unregistering the trap.
- The driver queries the Management Capabilities Mask (MCAM) register
during initialization to understand if certain features are supported.
However, not all firmware versions support this register, leading to
the driver failing to load.
Patches #2 and #3 fix this issue by treating an error in the register
query as an indication that the feature is not supported.
v2:
- Patch #2:
- Make mlxsw_env_max_module_eeprom_len_query() void
====================
mlxsw: core_env: Fix driver initialization with old firmware
The driver queries the Management Capabilities Mask (MCAM) register
during initialization to understand if it can read up to 128 bytes from
transceiver modules.
However, not all firmware versions support this register, leading to the
driver failing to load.
Fix by treating an error in the register query as an indication that the
feature is not supported.
mlxsw: core: Unregister EMAD trap using FORWARD action
The device's manual (PRM - Programmer's Reference Manual) classifies the
trap that is used to deliver EMAD responses as an "event trap". Among
other things, it means that the only actions that can be associated with
the trap are TRAP and FORWARD (NOP).
Currently, during driver de-initialization the driver unregisters the
trap by setting its action to DISCARD, which violates the above
guideline. Future firmware versions will prevent such misuses by
returning an error. This does not prevent the driver from working, but
an error will be printed to the kernel log during module removal /
devlink reload:
net: bcmasp: fix memory leak when bringing down interface
When bringing down the TX rings we flush the rings but forget to
reclaimed the flushed packets. This leads to a memory leak since we
do not free the dma mapped buffers. This also leads to tx control
block corruption when bringing down the interface for power
management.
udp: preserve the connected status if only UDP cmsg
If "udp_cmsg_send()" returned 0 (i.e. only UDP cmsg),
"connected" should not be set to 0. Otherwise it stops
the connected socket from using the cached route.
David Bauer [Thu, 18 Apr 2024 13:29:08 +0000 (15:29 +0200)]
vxlan: drop packets from invalid src-address
The VXLAN driver currently does not check if the inner layer2
source-address is valid.
In case source-address snooping/learning is enabled, a entry in the FDB
for the invalid address is created with the layer3 address of the tunnel
endpoint.
If the frame happens to have a non-unicast address set, all this
non-unicast traffic is subsequently not flooded to the tunnel network
but sent to the learnt host in the FDB. To make matters worse, this FDB
entry does not expire.
Apply the same filtering for packets as it is done for bridges. This not
only drops these invalid packets but avoids them from being learnt into
the FDB.
driver needs queue msix vectors and one misc irq vector,
but only queue vectors need irq affinity.
when num_online_cpus is less than chip max msix vectors,
driver will acquire (num_online_cpus + 1) vecotrs, and
call pci_alloc_irq_vectors_affinity functions with affinity
params without setting pre_vectors or post_vectors, it will
cause return error code -ENOSPC.
Misc irq vector is vector 0, driver need to set affinity params
.pre_vectors = 1.
Fixes: 3f703186113f ("net: libwx: Add irq flow functions") Signed-off-by: Duanqiang Wen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Merge tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"A little calmer than usual, probably just the timing of sub-tree PRs.
Including fixes from netfilter.
Current release - regressions:
- inet: bring NLM_DONE out to a separate recv() again, fix user space
which assumes multiple recv()s will happen and gets blocked forever
- drv: mlx5:
- restore mistakenly dropped parts in register devlink flow
- use channel mdev reference instead of global mdev instance for
coalescing
- acquire RTNL lock before RQs/SQs activation/deactivation
Previous releases - regressions:
- net: change maximum number of UDP segments to 128, fix virtio
compatibility with Windows peers
- usb: ax88179_178a: avoid writing the mac address before first
reading
Previous releases - always broken:
- sched: fix mirred deadlock on device recursion
- netfilter:
- br_netfilter: skip conntrack input hook for promisc packets
- fixes removal of duplicate elements in the pipapo set backend
- various fixes for abort paths and error handling
- af_unix: don't peek OOB data without MSG_OOB
- drv: flower: fix fragment flags handling in multiple drivers
- drv: ravb: fix jumbo frames and packet stats accounting
Misc:
- kselftest_harness: fix Clang warning about zero-length format
- tun: limit printing rate when illegal packet received by tun dev"
* tag 'net-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits)
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
net: usb: ax88179_178a: avoid writing the mac address before first reading
net: ravb: Fix RX byte accounting for jumbo packets
net: ravb: Fix GbEth jumbo packet RX checksum handling
net: ravb: Allow RX loop to move past DMA mapping errors
net: ravb: Count packets instead of descriptors in R-Car RX path
net: ethernet: mtk_eth_soc: fix WED + wifi reset
net:usb:qmi_wwan: support Rolling modules
selftests: kselftest_harness: fix Clang warning about zero-length format
net/sched: Fix mirred deadlock on device recursion
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
s390/ism: Properly fix receive message buffer allocation
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
net: dsa: mt7530: fix mirroring frames received on local port
tun: limit printing rate when illegal packet received by tun dev
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
...
net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.
net: usb: ax88179_178a: avoid writing the mac address before first reading
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.
In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.
Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.
Merge tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- The input subsystem contributes entropy in some places where a
spinlock is held, but the entropy accounting code only handled
callers being in an interrupt or non-atomic process context, but not
atomic process context. We fix this by removing an optimization and
just calling queue_work() unconditionally.
- Greg accidently sent up a patch not intended for his tree and that
had been nack'd, so that's now reverted.
* tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
Revert "vmgenid: emit uevent when VMGENID updates"
random: handle creditable entropy from atomic process context
- x86/intel-uncore-freq: Bump minor version to avoid "unsupported" message
- amd/pmc: New BIOS version still needs Spurious IRQ1 quirk
* tag 'platform-drivers-x86-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
platform/x86/intel-uncore-freq: Increase minor number support
platform/x86: ISST: Add Granite Rapids-D to HPM CPU list
platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14
platform/x86/amd: pmf: Add infrastructure for quirking supported funcs
platform/x86/amd: pmf: Decrease error message to debug
Revert "vmgenid: emit uevent when VMGENID updates"
This reverts commit ad6bcdad2b6724e113f191a12f859a9e8456b26d. I had
nak'd it, and Greg said on the thread that it links that he wasn't going
to take it either, especially since it's not his code or his tree, but
then, seemingly accidentally, it got pushed up some months later, in
what looks like a mistake, with no further discussion in the linked
thread. So revert it, since it's clearly not intended.
Paolo Abeni [Thu, 18 Apr 2024 11:12:36 +0000 (13:12 +0200)]
Merge tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 amends a missing spot where the set iterator type is unset.
This is fixing a issue in the previous pull request.
Patch #2 fixes the delete set command abort path by restoring state
of the elements. Reverse logic for the activate (abort) case
otherwise element state is not restored, this requires to move
the check for active/inactive elements to the set iterator
callback. From the deactivate path, toggle the next generation
bit and from the activate (abort) path, clear the next generation
bitmask.
Patch #3 skips elements already restored by delete set command from the
abort path in case there is a previous delete element command in
the batch. Check for the next generation bit just like it is done
via set iteration to restore maps.
netfilter pull request 24-04-18
* tag 'nf-24-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix memleak in map from abort path
netfilter: nf_tables: restore set elements when delete set fails
netfilter: nf_tables: missing iterator type in lookup walk
====================
These patches fix bugs found during recent work on the ravb driver.
Patches 1 & 2 affect the R-Car code paths so have been tested on an
R-Car M3N Salvator-XS board - this is the only R-Car board I currently
have access to.
Patches 2, 3 & 4 affect the GbEth code paths so have been tested on
RZ/G2L and RZ/G2UL SMARC EVK boards.
Changes v2->v3:
* Incorporate feedback from Niklas and add Reviewed-by tag to patch
"net: ravb: Count packets instead of descriptors in R-Car RX path".
Changes v1->v2:
* Fixed typos in commit message of patch
"net: ravb: Allow RX loop to move past DMA mapping errors".
* Added Sergey's Reviewed-by tags.
* Expanded Cc list as Patchwork complained that I had missed people.
* Trimmed the call trace in accordance with the docs [1] in patch
"net: ravb: Fix GbEth jumbo packet RX checksum handling".
Paul Barker [Tue, 16 Apr 2024 12:02:54 +0000 (13:02 +0100)]
net: ravb: Fix RX byte accounting for jumbo packets
The RX byte accounting for jumbo packets was changed to fix a potential
use-after-free bug. However, that fix used the wrong variable and so
only accounted for the number of bytes in the final descriptor, not the
number of bytes in the whole packet.
To fix this, we can simply update our stats with the correct number of
bytes before calling napi_gro_receive().
Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future
confusion. The variable name pkt_len is correct in ravb_rx_rcar() as
that function does not handle packets spanning multiple descriptors.
Fixes: 5a5a3e564de6 ("ravb: Fix potential use-after-free in ravb_rx_gbeth()") Signed-off-by: Paul Barker <[email protected]> Reviewed-by: Sergey Shtylyov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following
backtrace:
WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
pc : skb_trim+0x30/0x38
lr : ravb_rx_csum_gbeth+0x40/0x90
Call trace:
skb_trim+0x30/0x38
ravb_rx_gbeth+0x56c/0x5cc
ravb_poll+0xa0/0x204
__napi_poll+0x38/0x17c
This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
wrong skb for a packet which spans multiple descriptors. To fix this,
use the correct skb.
Fixes: c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") Signed-off-by: Paul Barker <[email protected]> Reviewed-by: Sergey Shtylyov <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
Paul Barker [Tue, 16 Apr 2024 12:02:52 +0000 (13:02 +0100)]
net: ravb: Allow RX loop to move past DMA mapping errors
The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop
iteration if a zero-length descriptor is seen (indicating a DMA mapping
error). However, the current RX descriptor index `priv->cur_rx[q]` was
incremented at the end of the loop and so would not be incremented when
we skip to the next loop iteration. This would cause the loop to keep
seeing the same zero-length descriptor instead of moving on to the next
descriptor.
As the loop counter `i` still increments, the loop would eventually
terminate so there is no risk of being stuck here forever - but we
should still fix this to avoid wasting cycles.
To fix this, the RX descriptor index is incremented at the top of the
loop, in the for statement itself. The assignments of `entry` and `desc`
are brought into the loop to avoid the need for duplication.
Paul Barker [Tue, 16 Apr 2024 12:02:51 +0000 (13:02 +0100)]
net: ravb: Count packets instead of descriptors in R-Car RX path
The units of "work done" in the RX path should be packets instead of
descriptors.
Descriptors which are used by the hardware to record error conditions or
are empty in the case of a DMA mapping error should not count towards
our RX work budget.
Also make the limit variable unsigned as it can never be negative.
Felix Fietkau [Tue, 16 Apr 2024 08:23:29 +0000 (10:23 +0200)]
net: ethernet: mtk_eth_soc: fix WED + wifi reset
The WLAN + WED reset sequence relies on being able to receive interrupts from
the card, in order to synchronize individual steps with the firmware.
When WED is stopped, leave interrupts running and rely on the driver turning
off unwanted ones.
WED DMA also needs to be disabled before resetting.
Jakub Kicinski [Thu, 18 Apr 2024 01:38:34 +0000 (18:38 -0700)]
Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-16 (ice)
This series contains updates to ice driver only.
Michal fixes a couple of issues with TC filter parsing; always add match
for src_vsi and remove flag check that could prevent addition of valid
filters.
Marcin adds additional checks for unsupported flower filters.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix checking for unsupported keys on non-tunnel device
ice: tc: allow zero flags in parsing tc flower
ice: tc: check src_vsi in case of traffic from VF
====================
Merge tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fixup in zoned mode for out-of-order writes of metadata that are no
longer necessary, this used to be tracked in a separate list but now
the old locaion needs to be zeroed out, also add assertions
- fix bulk page allocation retry, this may stall after first failure
for compression read/write
* tag 'for-6.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: do not wait for short bulk allocation
btrfs: zoned: add ASSERT and WARN for EXTENT_BUFFER_ZONED_ZEROOUT handling
btrfs: zoned: do not flag ZEROOUT on non-dirty extent buffer
Eric Dumazet [Mon, 15 Apr 2024 21:07:28 +0000 (18:07 -0300)]
net/sched: Fix mirred deadlock on device recursion
When the mirred action is used on a classful egress qdisc and a packet is
mirrored or redirected to self we hit a qdisc lock deadlock.
See trace below.
[..... other info removed for brevity....]
[ 82.890906]
[ 82.890906] ============================================
[ 82.890906] WARNING: possible recursive locking detected
[ 82.890906] 6.8.0-05205-g77fadd89fe2d-dirty #213 Tainted: G W
[ 82.890906] --------------------------------------------
[ 82.890906] ping/418 is trying to acquire lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] but task is already holding lock:
[ 82.890906] ffff888006994110 (&sch->q.lock){+.-.}-{3:3}, at:
__dev_queue_xmit+0x1778/0x3550
[ 82.890906]
[ 82.890906] other info that might help us debug this:
[ 82.890906] Possible unsafe locking scenario:
[ 82.890906]
[ 82.890906] CPU0
[ 82.890906] ----
[ 82.890906] lock(&sch->q.lock);
[ 82.890906] lock(&sch->q.lock);
[ 82.890906]
[ 82.890906] *** DEADLOCK ***
[ 82.890906]
[..... other info removed for brevity....]
Example setup (eth0->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
Another example(eth0->eth1->eth0) to recreate
tc qdisc add dev eth0 root handle 1: htb default 30
tc filter add dev eth0 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth1
tc qdisc add dev eth1 root handle 1: htb default 30
tc filter add dev eth1 handle 1: protocol ip prio 2 matchall \
action mirred egress redirect dev eth0
We fix this by adding an owner field (CPU id) to struct Qdisc set after
root qdisc is entered. When the softirq enters it a second time, if the
qdisc owner is the same CPU, the packet is dropped to break the loop.
netfilter: nf_tables: fix memleak in map from abort path
The delete set command does not rely on the transaction object for
element removal, therefore, a combination of delete element + delete set
from the abort path could result in restoring twice the refcount of the
mapping.
Check for inactive element in the next generation for the delete element
command in the abort path, skip restoring state if next generation bit
has been already cleared. This is similar to the activate logic using
the set walk iterator.
Andy Shevchenko [Wed, 17 Apr 2024 14:19:13 +0000 (17:19 +0300)]
gpiolib: swnode: Remove wrong header inclusion
The flags in the software node properties are supposed to be
the GPIO lookup flags, which are provided by gpio/machine.h,
as the software nodes are the kernel internal thing and doesn't
need to rely to any of ABIs.
Fixes: e7f9ff5dc90c ("gpiolib: add support for software nodes") Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
Merge tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"The first patch fixes a regression in the suspend/resume path for the
dwc pwm driver that was introduced in v6.9-rc1 when support for 16
channel devices was added.
The second patch fixes a bunch of device tree binding check warnings"
* tag 'pwm/for-6.9-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
dt-bindings: pwm: mediatek,pwm-disp: Document power-domains property
pwm: dwc: allow suspend/resume for 16 channels
netfilter: nf_tables: restore set elements when delete set fails
From abort path, nft_mapelem_activate() needs to restore refcounters to
the original state. Currently, it uses the set->ops->walk() to iterate
over these set elements. The existing set iterator skips inactive
elements in the next generation, this does not work from the abort path
to restore the original state since it has to skip active elements
instead (not inactive ones).
This patch moves the check for inactive elements to the set iterator
callback, then it reverses the logic for the .activate case which
needs to skip active elements.
Toggle next generation bit for elements when delete set command is
invoked and call nft_clear() from .activate (abort) path to restore the
next generation bit.
The splat below shows an object in mappings memleak:
platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only, and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
random: handle creditable entropy from atomic process context
The entropy accounting changes a static key when the RNG has
initialized, since it only ever initializes once. Static key changes,
however, cannot be made from atomic context, so depending on where the
last creditable entropy comes from, the static key change might need to
be deferred to a worker.
Previously the code used the execute_in_process_context() helper
function, which accounts for whether or not the caller is
in_interrupt(). However, that doesn't account for the case where the
caller is actually in process context but is holding a spinlock.
This turned out to be the case with input_handle_event() in
drivers/input/input.c contributing entropy:
According to Guoyong, it's not really possible to refactor the various
drivers to never hold a spinlock there. And in_atomic() isn't reliable.
So, rather than trying to be too fancy, just punt the change in the
static key to a workqueue always. There's basically no drawback of doing
this, as the code already needed to account for the static key not
changing immediately, and given that it's just an optimization, there's
not exactly a hurry to change the static key right away, so deferal is
fine.
David S. Miller [Wed, 17 Apr 2024 07:56:51 +0000 (08:56 +0100)]
Merge branch 'mt7530-fixes'
Merge branch 'mr7530-fixes'
Arınç ÜNAL says:
====================
Fix port mirroring on MT7530 DSA subdriver
This patch series fixes the frames received on the local port (monitor
port) not being mirrored, and port mirroring for the MT7988 SoC switch.
====================
net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.
Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.
Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch") Signed-off-by: Arınç ÜNAL <[email protected]> Acked-by: Daniel Golle <[email protected]> Signed-off-by: David S. Miller <[email protected]>
net: dsa: mt7530: fix mirroring frames received on local port
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring") Signed-off-by: Arınç ÜNAL <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Lei Chen [Mon, 15 Apr 2024 02:02:46 +0000 (22:02 -0400)]
tun: limit printing rate when illegal packet received by tun dev
vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.
net_ratelimit mechanism can be used to limit the dumping rate.
Marcin Szycik [Tue, 9 Apr 2024 15:45:44 +0000 (17:45 +0200)]
ice: Fix checking for unsupported keys on non-tunnel device
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
In case of traffic going from the VF (so ingress for port representor)
source VSI should be consider during packet classification. It is
needed for hardware to not match packets from different ports with
filters added on other port.
It is only for "from VF" traffic, because other traffic direction
doesn't have source VSI.
Set correct ::src_vsi in rule_info to pass it to the hardware filter.
For example this rule should drop only ipv4 packets from eth10, not from
the others VF PRs. It is needed to check source VSI in this case.
$tc filter add dev eth10 ingress protocol ip flower skip_sw action drop
The series got born as a result of the discussions around the recent
Yanteng' series adding the Loongson LS7A1000, LS2K1000, LS7A2000, LS2K2000
MACs support: Link: https://lore.kernel.org/netdev/fu3f6uoakylnb6eijllakeu5i4okcyqq7sfafhp5efaocbsrwe@w74xe7gb6x7p
In particular the Yanteng' patchset needed to implement the Loongson
MAC-specific constraints applied to the link speed and link duplex mode.
As a result of the discussion with Russel the next preliminary patch was
born: Link: https://lore.kernel.org/netdev/df31e8bcf74b3b4ddb7ddf5a1c371390f16a2ad5.1712917541.git.siyanteng@loongson.cn
The patch above was a temporal solution utilized by Yanteng for further
developments and to move on with the on-going review. This patchset is a
refactored version of that single patch with formatting required for the
fixes patches.
In particular the series starts with fixing the half-duplex-less
constraint currently applied for all IP-cores. In fact it's specific for
the DW QoS Eth only (DW GMAC v4.x/v5.x).
The next patch fixes the MAC-capabilities setting up during the active
Tx/Rx queues re-initialization procedure. Particularly the procedure
missed the max-speed limit thus possibly activating speeds prohibited on
the respective platforms.
Third patch fixes the incorrect MAC-capabilities initialization for DW
MAC100, DW XGMAC and DW XLGMAC devices by moving the correct
initialization to the IP-core specific setup() methods.
That's it for now. Thanks for review and testing in advance.
As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE.
Meanwhile what is currently implemented defines 10/100/1000 link speeds
for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC
and DW XLGMAC devices.
Seeing the flow-control is implemented as a callback for each MAC IP-core
(see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(),
etc) and since the MAC-specific setup() method is supposed to be called
for each available DW MAC-based device, the capabilities initialization
can be freely moved to these setup() functions, thus correctly setting up
the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A
new stmmac_link::caps field was specifically introduced for that so to
have all link-specific info preserved in a single structure.
Note the suggested change fixes three earlier commits at a time. The
commit 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC
supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW
XGMAC IP-core even though it doesn't support them. The commit df7699c70c1b
("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000
capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit 8a880936e902 ("net: stmmac: Add XLGMII support") incorrectly permitted the
10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core.
Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Fixes: df7699c70c1b ("net: stmmac: Do not cut down 1G modes") Fixes: 8a880936e902 ("net: stmmac: Add XLGMII support") Suggested-by: Russell King (Oracle) <[email protected]> Signed-off-by: Serge Semin <[email protected]> Reviewed-by: Romain Gantois <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
net: stmmac: Fix max-speed being ignored on queue re-init
It's possible to have the maximum link speed being artificially limited on
the platform-specific basis. It's done either by setting up the
plat_stmmacenet_data::max_speed field or by specifying the "max-speed"
DT-property. In such cases it's required that any specific
MAC-capabilities re-initializations would take the limit into account. In
particular the link speed capabilities may change during the number of
active Tx/Rx queues re-initialization. But the currently implemented
procedure doesn't take the speed limit into account.
Fix that by calling phylink_limit_mac_speed() in the
stmmac_reinit_queues() method if the speed limitation was required in the
same way as it's done in the stmmac_phy_setup() function.
Fixes: 95201f36f395 ("net: stmmac: update MAC capabilities when tx queues are updated") Signed-off-by: Serge Semin <[email protected]> Reviewed-by: Romain Gantois <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only
There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
enabled:
DW GMAC v3.7+ with AV feature,
DW QoS Eth v4.x/v5.x,
DW XGMAC/XLGMAC
Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
support the half-duplex link mode in case if more than one queues enabled:
"In multiple queue/channel configurations, for half-duplex operation,
enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
full-duplex operation, any queue/channel can be enabled."
The rest of the IP-cores don't have such constraint. Thus in order to have
the constraint applied for the DW QoS Eth MACs only, let's move the it'
implementation to the respective MAC-capabilities getter and make sure the
getter is called in the queues re-init procedure.
Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode") Signed-off-by: Serge Semin <[email protected]> Reviewed-by: Romain Gantois <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
platform/x86/intel-uncore-freq: Increase minor number support
No new changes will be added for minor version 2. Change the minor
version number to 2 and stop displaying log message for unsupported
minor version 2.
platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14
ROG Zephyrus G14 advertises support for SPS notifications to the
BIOS but doesn't actually use them. Instead the asus-nb-wmi driver
utilizes such events.
Add a quirk to prevent the system from registering for ACPI platform
profile when this system is found to avoid conflicts.
platform/x86/amd: pmf: Decrease error message to debug
ASUS ROG Zephyrus G14 doesn't have _CRS in AMDI0102 device and so
there are no resources to walk. This is expected behavior because
it doesn't support Smart PC. Decrease error message to debug.
selftests/tcp_ao: Printing fixes to confirm with format-security
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces
> lib/setup.c: In function ‘__test_msg’:
> lib/setup.c:20:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 20 | ksft_print_msg(buf);
> | ^~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_ok’:
> lib/setup.c:26:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 26 | ksft_test_result_pass(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_fail’:
> lib/setup.c:32:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 32 | ksft_test_result_fail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_xfail’:
> lib/setup.c:38:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 38 | ksft_test_result_xfail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_error’:
> lib/setup.c:44:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 44 | ksft_test_result_error(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_skip’:
> lib/setup.c:50:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 50 | ksft_test_result_skip(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> cc1: some warnings being treated as errors
As the buffer was already pre-printed into, print it as a string
rather than a format-string.
selftests/tcp_ao: Fix fscanf() call for format-security
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces:
> lib/proc.c: In function ‘netstat_read_type’:
> lib/proc.c:89:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 89 | if (fscanf(fnetstat, type->header_name) == EOF)
> | ^~
> cc1: some warnings being treated as errors
Here the selftests lib parses header name, while expectes non-space word
ending with a column.
Currently, "active reset" cases are flaky, because select() is called
for 3 sockets, while only 2 are expected to receive RST.
The idea of the third socket was to get into request_sock_queue,
but the test mistakenly attempted to connect() after the listener
socket was shut down.
Repair this test, it's important to check the different kernel
code-paths for signing RST TCP-AO segments.
Merge tag 'nfsd-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a potential tracepoint crash
- Fix NFSv4 GETATTR on big-endian platforms
* tag 'nfsd-6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix endianness issue in nfsd4_encode_fattr4
SUNRPC: Fix rpcgss_context trace event acceptor field
Merge tag 'bcachefs-2024-04-15' of https://evilpiepirate.org/git/bcachefs
Pull yet more bcachefs fixes from Kent Overstreet:
"This gets recovery working again for the affected user I've been
working with, and I'm still waiting to hear back on other bug reports
but should fix it for everyone else who's been having issues with
recovery.
- Various recovery fixes:
- fixes for the btree_insert_entry being resized on path
allocation btree_path array recently became dynamically
resizable, and btree_insert_entry along with it; this was being
observed during journal replay, when write buffer btree updates
don't use the write buffer and instead use the normal btree
update path
- multiple fixes for deadlock in recovery when we need to do lots
of btree node merges; excessive merges were clocking up the
whole pipeline
- write buffer path now correctly does btree node merges when
needed
- fix failure to go RW when superblock indicates recovery passes
needed (i.e. to complete an unfinished upgrade)
- Various unsafety fixes - test case contributed by a user who had
two drives out of a six drive array write out a whole bunch of
garbage after power failure
- New (tiny) on disk format feature: since it appears the btree node
scan tool will be a more regular thing (crappy hardware, user
error) - this adds a 64 bit per-device bitmap of regions that have
ever had btree nodes.
- A path->should_be_locked fix, from a larger patch series tightening
up invariants and assertions around btree transaction and path
locking state.
This particular fix prevents us from keeping around btree_paths
that are no longer needed"
* tag 'bcachefs-2024-04-15' of https://evilpiepirate.org/git/bcachefs: (24 commits)
bcachefs: set_btree_iter_dontneed also clears should_be_locked
bcachefs: fix error path of __bch2_read_super()
bcachefs: Check for backpointer bucket_offset >= bucket size
bcachefs: bch_member.btree_allocated_bitmap
bcachefs: sysfs internal/trigger_journal_flush
bcachefs: Fix bch2_btree_node_fill() for !path
bcachefs: add safety checks in bch2_btree_node_fill()
bcachefs: Interior known are required to have known key types
bcachefs: add missing bounds check in __bch2_bkey_val_invalid()
bcachefs: Fix btree node merging on write buffer btrees
bcachefs: Disable merges from interior update path
bcachefs: Run merges at BCH_WATERMARK_btree
bcachefs: Fix missing write refs in fs fio paths
bcachefs: Fix deadlock in journal replay
bcachefs: Go rw if running any explicit recovery passes
bcachefs: Standardize helpers for printing enum strs with bounds checks
bcachefs: don't queue btree nodes for rewrites during scan
bcachefs: fix race in bch2_btree_node_evict()
bcachefs: fix unsafety in bch2_stripe_to_text()
bcachefs: fix unsafety in bch2_extent_ptr_to_text()
...
Kent Overstreet [Sat, 13 Apr 2024 22:02:15 +0000 (18:02 -0400)]
bcachefs: set_btree_iter_dontneed also clears should_be_locked
This is part of a larger series cleaning up the semantics of
should_be_locked and adding assertions around it; if we don't need an
iterator/path anymore, it clearly doesn't need to be locked.
Merge tag 'linux_kselftest-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to kselftest harness to prevent infinite loop triggered in an
assert in FIXTURE_TEARDOWN and a fix to a problem seen in being able
to stop subsystem-enable tests when sched events are being traced"
* tag 'linux_kselftest-fixes-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/harness: Prevent infinite loop due to Assert in FIXTURE_TEARDOWN
selftests/ftrace: Limit length in subsystem-enable tests
With 16 channel pwm support, we're registering two instances of pwm_chip
with 8 channels each. We need to update PM functions to use both instances
of pwm_chip during power state transitions.
Introduce struct dwc_pwm_drvdata and use it as driver_data, which will
maintain both instances of pwm_chip along with dwc_pwm_info and allow us
to use them inside suspend/resume handles.
Upon reviewing the flower control flags handling in
this driver, I notice that the key wasn't being used,
only the mask.
Ie. `tc flower ... ip_flags nofrag` was hardware
offloaded as `... ip_flags frag`.
Only compile tested, no access to HW.
Fixes: c672e3727989 ("octeontx2-pf: Add support to filter packet based on IP fragment") Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Jakub Kicinski [Thu, 11 Apr 2024 18:02:02 +0000 (11:02 -0700)]
inet: bring NLM_DONE out to a separate recv() again
Commit under Fixes optimized the number of recv() calls
needed during RTM_GETROUTE dumps, but we got multiple
reports of applications hanging on recv() calls.
Applications expect that a route dump will be terminated
with a recv() reading an individual NLM_DONE message.
Coalescing NLM_DONE is perfectly legal in netlink,
but even tho reporters fixed the code in respective
projects, chances are it will take time for those
applications to get updated. So revert to old behavior
(for now)?
Kent Overstreet [Sun, 14 Apr 2024 03:59:28 +0000 (23:59 -0400)]
bcachefs: Interior known are required to have known key types
For forwards compatibilyt, we allow bkeys of unknown type in leaf nodes;
we can simply ignore metadata we don't understand. Pointers to btree
nodes must always be of known types, howwever.
Merge tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull sysfs fix from Al Viro:
"Get rid of lockdep false positives around sysfs/overlayfs
syzbot has uncovered a class of lockdep false positives for setups
with sysfs being one of the backing layers in overlayfs. The root
cause is that of->mutex allocated when opening a sysfs file read-only
(which overlayfs might do) is confused with of->mutex of a file opened
writable (held in write to sysfs file, which overlayfs won't do).
Assigning them separate lockdep classes fixes that bunch and it's
obviously safe"
* tag 'pull-sysfs-annotation-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
kernfs: annotate different lockdep class for of->mutex of writable files
Merge tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Follow up fixes for the BHI mitigations code
- Fix !SPECULATION_MITIGATIONS bug not turning off mitigations as
expected
- Work around an APIC emulation bug when the kernel is built with Clang
and run as a SEV guest
- Follow up x86 topology fixes
* tag 'x86-urgent-2024-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Move TOPOEXT enablement into the topology parser
x86/cpu/amd: Make the NODEID_MSR union actually work
x86/cpu/amd: Make the CPUID 0x80000008 parser correct
x86/bugs: Replace CONFIG_SPECTRE_BHI_{ON,OFF} with CONFIG_MITIGATION_SPECTRE_BHI
x86/bugs: Remove CONFIG_BHI_MITIGATION_AUTO and spectre_bhi=auto
x86/bugs: Clarify that syscall hardening isn't a BHI mitigation
x86/bugs: Fix BHI handling of RRSBA
x86/bugs: Rename various 'ia32_cap' variables to 'x86_arch_cap_msr'
x86/bugs: Cache the value of MSR_IA32_ARCH_CAPABILITIES
x86/bugs: Fix BHI documentation
x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n
x86/topology: Don't update cpu_possible_map in topo_set_cpuids()
x86/bugs: Fix return type of spectre_bhi_state()
x86/apic: Force native_apic_mem_read() to use the MOV instruction