When loading a DT overlay that creates a device, the device is not
probed, unless the DT overlay is unloaded and reloaded again.
After the recent refactoring to improve fw_devlink, it no longer depends
on the "compatible" property to identify which device tree nodes will
become struct devices. fw_devlink now picks up dangling consumers
(consumers pointing to descendent device tree nodes of a device that
aren't converted to child devices) when a device is successfully bound
to a driver. See __fw_devlink_pickup_dangling_consumers().
However, during DT overlay, a device's device tree node can have
sub-nodes added/removed without unbinding/rebinding the driver. This
difference in behavior between the normal device instantiation and
probing flow vs. the DT overlay flow has a bunch of implications that
are pointed out elsewhere[1]. One of them is that the fw_devlink logic
to pick up dangling consumers is never exercised.
This patch solves the fw_devlink issue by marking all DT nodes added by
DT overlays with FWNODE_FLAG_NOT_DEVICE (fwnode that won't become
device), and by clearing the flag when a struct device is actually
created for the DT node. This way, fw_devlink knows not to have
consumers waiting on these newly added DT nodes, and to propagate the
dependency to an ancestor DT node that has the corresponding struct
device.
Based on a patch by Saravana Kannan, which covered only platform and spi
devices.
Mark Brown [Sat, 28 Jan 2023 17:47:50 +0000 (17:47 +0000)]
of/address: Return an error when no valid dma-ranges are found
Commit 7a8b64d17e35 ("of/address: use range parser for of_dma_get_range")
converted the parsing of dma-range properties to use code shared with the
PCI range parser. The intent was to introduce no functional changes however
in the case where we fail to translate the first resource instead of
returning -EINVAL the new code we return 0. Restore the previous behaviour
by returning an error if we find no valid ranges, the original code only
handled the first range but subsequently support for parsing all supplied
ranges was added.
This avoids confusing code using the parsed ranges which doesn't expect to
successfully parse ranges but have only a list terminator returned, this
fixes breakage with so far as I can tell all DMA for on SoC devices on the
Socionext Synquacer platform which has a firmware supplied DT. A bisect
identified the original conversion as triggering the issues there.
This is because multiple devices with the same name 'of-display' are
created on the same bus. Update the code to create numbered device names
for the displays.
Also, fix a node refcounting issue when exiting the boot display loop.
Rob Herring [Tue, 3 Jan 2023 18:00:32 +0000 (12:00 -0600)]
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
I do not read a strict requirement on /chosen node in either ePAPR or in
Documentation/devicetree. Help text for CONFIG_CMDLINE and
CONFIG_CMDLINE_EXTEND doesn't make their behavior explicitly dependent on
the presence of /chosen or the presense of /chosen/bootargs.
However the early check for /chosen and bailing out in
early_init_dt_scan_chosen() skips CONFIG_CMDLINE handling which is not
really related to /chosen node or the particular method of passing cmdline
from bootloader.
This leads to counterintuitive combinations (assuming
CONFIG_CMDLINE_EXTEND=y):
a) bootargs="foo", CONFIG_CMDLINE="bar" => cmdline=="foo bar"
b) /chosen missing, CONFIG_CMDLINE="bar" => cmdline==""
c) bootargs="", CONFIG_CMDLINE="bar" => cmdline==" bar"
Rework early_init_dt_scan_chosen() so that the cmdline config options are
always handled.
dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
There are several properties depending on number of ports. Some of them
had maximum limit of 5 and some of 8. SM8450 AudioReach comes with 8
ports, so fix the limits:
sm8450-sony-xperia-nagara-pdx224.dtb: soundwire-controller@3250000: qcom,ports-word-length: 'oneOf' conditional failed, one must be fixed:
[[255, 255, 255, 255, 255, 255, 255, 255]] is too short
[255, 255, 255, 255, 255, 255, 255, 255] is too long
Andreas Rammhold [Fri, 23 Dec 2022 11:27:47 +0000 (12:27 +0100)]
of/fdt: run soc memory setup when early_init_dt_scan_memory fails
If memory has been found early_init_dt_scan_memory now returns 1. If
it hasn't found any memory it will return 0, allowing other memory
setup mechanisms to carry on.
Previously early_init_dt_scan_memory always returned 0 without
distinguishing between any kind of memory setup being done or not. Any
code path after the early_init_dt_scan memory call in the ramips
plat_mem_setup code wouldn't be executed anymore. Making
early_init_dt_scan_memory the only way to initialize the memory.
Some boards, including my mt7621 based Cudy X6 board, depend on memory
initialization being done via the soc_info.mem_detect function
pointer. Those wouldn't be able to obtain memory and panic the kernel
during early bootup with the message "early_init_dt_alloc_memory_arch:
Failed to allocate 12416 bytes align=0x40".
treewide: Convert del_timer*() to timer_shutdown*()
Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown". After a timer is set to this state, then it can no
longer be re-armed.
The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed. It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.
This was created by using a coccinelle script and the following
commands:
Linus Torvalds [Fri, 23 Dec 2022 22:44:08 +0000 (14:44 -0800)]
Merge tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One driver specific change here which handles the case where a SPI
device for some reason tries to change the bus speed during a message
on fsl_spi hardware, this should be very unusual"
* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fsl_spi: Don't change speed while chipselect is active
Linus Torvalds [Fri, 23 Dec 2022 22:38:00 +0000 (14:38 -0800)]
Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two core fixes here, one for a long standing race which some Qualcomm
systems have started triggering with their UFS driver and another
fixing a problem with supply lookup introduced by the fixes for devm
related use after free issues that were introduced in this merge
window"
* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix deadlock on regulator enable
regulator: core: Fix resolve supply lookup issue
Linus Torvalds [Fri, 23 Dec 2022 20:00:24 +0000 (12:00 -0800)]
Merge tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kernel hardening fixes from Kees Cook:
- Fix CFI failure with KASAN (Sami Tolvanen)
- Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)
- Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
Chancellor)
- Ignore "contents" argument in LoadPin's LSM hook handling
- Fix paste-o in /sys/kernel/warn_count API docs
- Use READ_ONCE() consistently for oops/warn limit reading
* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
cfi: Fix CFI failure with KASAN
exit: Use READ_ONCE() for all oops/warn limit reads
security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
lkdtm: cfi: Make PAC test work with GCC 7 and 8
docs: Fix path paste-o for /sys/kernel/warn_count
LoadPin: Ignore the "contents" argument of the LSM hooks
* tag 'pstore-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Properly assign mem_type property
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion
Linus Torvalds [Fri, 23 Dec 2022 19:44:20 +0000 (11:44 -0800)]
Merge tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Fix up the sound code to not pass __GFP_COMP to the non-coherent DMA
allocator, as it copes with that just as badly as the coherent
allocator, and then add a check to make sure no one passes the flag
ever again"
* tag 'dma-mapping-2022-12-23' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject GFP_COMP for noncoherent allocations
ALSA: memalloc: don't use GFP_COMP for non-coherent dma allocations
Linus Torvalds [Fri, 23 Dec 2022 19:39:18 +0000 (11:39 -0800)]
Merge tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- improve p9_check_errors to check buffer size instead of msize when
possible (e.g. not zero-copy)
- some more syzbot and KCSAN fixes
- minor headers include cleanup
* tag '9p-for-6.2-rc1' of https://github.com/martinetd/linux:
9p/client: fix data race on req->status
net/9p: fix response size check in p9_check_errors()
net/9p: distinguish zero-copy requests
9p/xen: do not memcpy header into req->rc
9p: set req refcount to zero to avoid uninitialized usage
9p/net: Remove unneeded idr.h #include
9p/fs: Remove unneeded idr.h #include
* tag 'drm-next-2022-12-23' of git://anongit.freedesktop.org/drm/drm: (39 commits)
drm/amdgpu: grab extra fence reference for drm_sched_job_add_dependency
drm/amdgpu: enable VCN DPG for GC IP v11.0.4
drm/amdgpu: skip mes self test after s0i3 resume for MES IP v11.0
drm/amd/pm: correct the fan speed retrieving in PWM for some SMU13 asics
drm/amd/pm: bump SMU13.0.0 driver_if header to version 0x34
drm/amdgpu: skip MES for S0ix as well since it's part of GFX
drm/amd/pm: avoid large variable on kernel stack
drm/amdkfd: Fix double release compute pasid
drm/amdkfd: Fix kfd_process_device_init_vm error handling
drm/amd/pm: update SMU13.0.0 reported maximum shader clock
drm/amd/pm: correct SMU13.0.0 pstate profiling clock settings
drm/amd/pm: enable GPO dynamic control support for SMU13.0.7
drm/amd/pm: enable GPO dynamic control support for SMU13.0.0
drm/amdgpu: revert "generally allow over-commit during BO allocation"
drm/amdgpu: Remove unnecessary domain argument
drm/amdgpu: Fix size validation for non-exclusive domains (v4)
drm/amdgpu: Check if fru_addr is not NULL (v2)
drm/i915/ttm: consider CCS for backup objects
drm/i915/migrate: fix corner case in CCS aux copying
drm/amdgpu: rework reserved VMID handling
...
Linus Torvalds [Fri, 23 Dec 2022 18:49:45 +0000 (10:49 -0800)]
Merge tag 'mips_6.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Fixes due to DT changes"
* tag 'mips_6.2_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: dts: bcm63268: Add missing properties to the TWD node
MIPS: ralink: mt7621: avoid to init common ralink reset controller
Linus Torvalds [Fri, 23 Dec 2022 18:45:00 +0000 (10:45 -0800)]
Merge tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Eight fixes, all cc:stable. One is for gcov and the remainder are MM"
* tag 'mm-hotfixes-stable-2022-12-22-14-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
gcov: add support for checksum field
test_maple_tree: add test for mas_spanning_rebalance() on insufficient data
maple_tree: fix mas_spanning_rebalance() on insufficient data
hugetlb: really allocate vma lock for all sharable vmas
kmsan: export kmsan_handle_urb
kmsan: include linux/vmalloc.h
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
mm, mremap: fix mremap() expanding vma with addr inside vma
Luca Stefani [Thu, 22 Dec 2022 13:10:49 +0000 (14:10 +0100)]
pstore: Properly assign mem_type property
If mem-type is specified in the device tree
it would end up overriding the record_size
field instead of populating mem_type.
As record_size is currently parsed after the
improper assignment with default size 0 it
continued to work as expected regardless of the
value found in the device tree.
Simply changing the target field of the struct
is enough to get mem-type working as expected.
John Stultz [Wed, 21 Dec 2022 05:18:55 +0000 (05:18 +0000)]
pstore: Make sure CONFIG_PSTORE_PMSG selects CONFIG_RT_MUTEXES
In commit 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex
to avoid priority inversion") I changed a lock to an rt_mutex.
However, its possible that CONFIG_RT_MUTEXES is not enabled,
which then results in a build failure, as the 0day bot detected:
https://lore.kernel.org/linux-mm/202212211244[email protected]/
Thus this patch changes CONFIG_PSTORE_PMSG to select
CONFIG_RT_MUTEXES, which ensures the build will not fail.
Sami Tolvanen [Thu, 22 Dec 2022 22:57:47 +0000 (22:57 +0000)]
cfi: Fix CFI failure with KASAN
When CFI_CLANG and KASAN are both enabled, LLVM doesn't generate a
CFI type hash for asan.module_ctor functions in translation units
where CFI is disabled, which leads to a CFI failure during boot when
do_ctors calls the affected constructors:
CFI failure at do_basic_setup+0x64/0x90 (target:
asan.module_ctor+0x0/0x28; expected type: 0xa540670c)
Specifically, this happens because CFI is disabled for
kernel/cfi.c. There's no reason to keep CFI disabled here anymore, so
fix the failure by not filtering out CC_FLAGS_CFI for the file.
Note that https://reviews.llvm.org/rG3b14862f0a96 fixed the issue
where LLVM didn't emit CFI type hashes for any sanitizer constructors,
but now type hashes are emitted correctly for TUs that use CFI.
Linus Torvalds [Thu, 22 Dec 2022 19:22:31 +0000 (11:22 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"Mostly small bug fixes and small updates.
The only things of note is a qla2xxx fix for crash on hotplug and
timeout and the addition of a user exposed abstraction layer for
persistent reservation error return handling (which necessitates the
conversion of nvme.c as well as SCSI)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix crash when I/O abort times out
nvme: Convert NVMe errors to PR errors
scsi: sd: Convert SCSI errors to PR errors
scsi: core: Rename status_byte to sg_status_byte
block: Add error codes for common PR failures
scsi: sd: sd_zbc: Trace zone append emulation
scsi: libfc: Include the correct header
Linus Torvalds [Thu, 22 Dec 2022 19:17:34 +0000 (11:17 -0800)]
Merge tag 'afs-next-20221222' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull afs update from David Howells:
"A fix for a couple of missing resource counter decrements, two small
cleanups of now-unused bits of code and a patch to remove writepage
support from afs"
* tag 'afs-next-20221222' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Stop implementing ->writepage()
afs: remove afs_cache_netfs and afs_zap_permits() declarations
afs: remove variable nr_servers
afs: Fix lost servers_outstanding count
Linus Torvalds [Thu, 22 Dec 2022 19:07:29 +0000 (11:07 -0800)]
Merge tag 'perf-tools-for-v6.2-2-2022-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"perf tools fixes and improvements:
- Don't stop building perf if python setuptools isn't installed, just
disable the affected perf feature.
- Remove explicit reference to python 2.x devel files, that warning
is about python-devel, no matter what version, being unavailable
and thus disabling the linking with libpython.
- Don't use -Werror=switch-enum when building the python support that
handles libtraceevent enumerations, as there is no good way to test
if some specific enum entry is available with the libtraceevent
installed on the system.
- Introduce 'perf lock contention' --type-filter and --lock-filter,
to filter by lock type and lock name:
$ sudo ./perf lock record -a -- ./perf bench sched messaging
$ sudo ./perf lock contention -E 5 -Y spinlock
contended total wait max wait avg wait type caller
802 1.26 ms 11.73 us 1.58 us spinlock __wake_up_common_lock+0x62
13 787.16 us 105.44 us 60.55 us spinlock remove_wait_queue+0x14
12 612.96 us 78.70 us 51.08 us spinlock prepare_to_wait+0x27
114 340.68 us 12.61 us 2.99 us spinlock try_to_wake_up+0x1f5
83 226.38 us 9.15 us 2.73 us spinlock folio_lruvec_lock_irqsave+0x5e
$ sudo ./perf lock contention -l
contended total wait max wait avg wait address symbol
$ sudo ./perf lock contention -L jiffies_lock,rcu_state
contended total wait max wait avg wait type caller
15 280.88 us 23.51 us 18.73 us spinlock tick_sched_do_timer+0x93
1 20.49 us 20.49 us 20.49 us spinlock __softirqentry_text_start+0xeb
$ sudo ./perf lock contention -L ffff9f4140059000
contended total wait max wait avg wait type caller
38 779.40 us 42.83 us 20.51 us spinlock worker_thread+0x50
11 216.30 us 39.87 us 19.66 us spinlock queue_work_on+0x39
8 118.13 us 20.51 us 14.77 us spinlock kthread+0xe5
- Fix splitting CC into compiler and options when checking if a
option is present in clang to build the python binding, needed in
systems such as yocto that set CC to, e.g.: "gcc --sysroot=/a/b/c".
- Add vendor events files (JSON) for AMD Zen 4, from sections
2.1.15.4 "Core Performance Monitor Counters", 2.1.15.5 "L3 Cache
Performance Monitor Counter"s and Section 7.1 "Fabric Performance
Monitor Counter (PMC) Events" in the Processor Programming
Reference (PPR) for AMD Family 19h Model 11h Revision B1
processors.
This constitutes events which capture op dispatch, execution and
retirement, branch prediction, L1 and L2 cache activity, TLB
activity, L3 cache activity and data bandwidth for various links
and interfaces in the Data Fabric.
- Also, from the same PPR are metrics taken from Section 2.1.15.2
"Performance Measurement", including pipeline utilization, which
are new to Zen 4 processors and useful for finding performance
bottlenecks by analyzing activity at different stages of the
pipeline.
- Greatly improve the 'srcline', 'srcline_from', 'srcline_to' and
'srcfile' sort keys performance by postponing calling the external
addr2line utility to the collapse phase of histogram bucketing.
- Fix 'perf test' "all PMU test" to skip parametrized events, that
requires setting up and are not supported by this test.
- Update tools/ copies of kernel headers: features,
disabled-features, fscrypt.h, i915_drm.h, msr-index.h, power pc
syscall table and kvm.h.
- Add .DELETE_ON_ERROR special Makefile target to clean up partially
updated files on error.
- Simplify the mksyscalltbl script for arm64 by avoiding to run the
host compiler to create the syscall table, do it all just with the
shell script.
- Further fixes to honour quiet mode (-q)"
* tag 'perf-tools-for-v6.2-2-2022-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
perf python: Fix splitting CC into compiler and options
perf scripting python: Don't be strict at handling libtraceevent enumerations
perf arm64: Simplify mksyscalltbl
perf build: Remove explicit reference to python 2.x devel files
perf vendor events amd: Add Zen 4 mapping
perf vendor events amd: Add Zen 4 metrics
perf vendor events amd: Add Zen 4 uncore events
perf vendor events amd: Add Zen 4 core events
perf vendor events intel: Refresh westmereex events
perf vendor events intel: Refresh westmereep-sp events
perf vendor events intel: Refresh westmereep-dp events
perf vendor events intel: Refresh tigerlake metrics and events
perf vendor events intel: Refresh snowridgex events
perf vendor events intel: Refresh skylakex metrics and events
perf vendor events intel: Refresh skylake metrics and events
perf vendor events intel: Refresh silvermont events
perf vendor events intel: Refresh sapphirerapids metrics and events
perf vendor events intel: Refresh sandybridge metrics and events
perf vendor events intel: Refresh nehalemex events
perf vendor events intel: Refresh nehalemep events
...
perf python: Fix splitting CC into compiler and options
Noticed this build failure on archlinux:base when building with clang:
clang-14: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
In tools/perf/util/setup.py we check if clang supports that option, but
since commit 3cad53a6f9cdbafa ("perf python: Account for multiple words
in CC") this got broken as in the common case where CC="clang":
And then the Popen will call clang with that bogus option name that in
turn will not produce the b"unknown argument" or b"is not supported"
that this function uses to detect if the option is not available and
thus later on clang will be called with an unknown/unsupported option.
Fix it by looking if really there are options in the provided CC
variable, and if so override 'cc' with the first token and append the
options to the 'option' variable.
David Howells [Fri, 18 Nov 2022 07:57:27 +0000 (07:57 +0000)]
afs: Stop implementing ->writepage()
We're trying to get rid of the ->writepage() hook[1]. Stop afs from using
it by unlocking the page and calling afs_writepages_region() rather than
folio_write_one().
A flag is passed to afs_writepages_region() to indicate that it should only
write a single region so that we don't flush the entire file in
->write_begin(), but do add other dirty data to the region being written to
try and reduce the number of RPC ops.
This requires ->migrate_folio() to be implemented, so point that at
filemap_migrate_folio() for files and also for symlinks and directories.
This can be tested by turning on the afs_folio_dirty tracepoint and then
doing something like:
Colin Ian King [Thu, 20 Oct 2022 17:39:23 +0000 (18:39 +0100)]
afs: remove variable nr_servers
Variable nr_servers is no longer being used, the last reference
to it was removed in commit 45df8462730d ("afs: Fix server list handling")
so clean up the code by removing it.
David Howells [Wed, 21 Dec 2022 14:30:48 +0000 (14:30 +0000)]
afs: Fix lost servers_outstanding count
The afs_fs_probe_dispatcher() work function is passed a count on
net->servers_outstanding when it is scheduled (which may come via its
timer). This is passed back to the work_item, passed to the timer or
dropped at the end of the dispatcher function.
But, at the top of the dispatcher function, there are two checks which
skip the rest of the function: if the network namespace is being destroyed
or if there are no fileservers to probe. These two return paths, however,
do not drop the count passed to the dispatcher, and so, sometimes, the
destruction of a network namespace, such as induced by rmmod of the kafs
module, may get stuck in afs_purge_servers(), waiting for
net->servers_outstanding to become zero.
Fix this by adding the missing decrements in afs_fs_probe_dispatcher().
Takashi Iwai [Thu, 22 Dec 2022 08:18:38 +0000 (09:18 +0100)]
Merge tag 'asoc-v6.2-3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.2
Some more small fixes and board quirks that came in since my last
update, the main one being the fixes from Kai for issues around the
attempts to get kexec working well on SOF based systems.
Jaroslav Kysela [Thu, 15 Dec 2022 15:30:37 +0000 (16:30 +0100)]
ALSA: usb-audio: Add new quirk FIXED_RATE for JBL Quantum810 Wireless
It seems that the firmware is broken and does not accept
the UAC_EP_CS_ATTR_SAMPLE_RATE URB. There is only one rate (48000Hz)
available in the descriptors for the output endpoint.
Create a new quirk QUIRK_FLAG_FIXED_RATE to skip the rate setup
when only one rate is available (fixed).
Linus Torvalds [Thu, 22 Dec 2022 02:57:24 +0000 (18:57 -0800)]
Merge tag 'trace-probes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull trace probes updates from Steven Rostedt:
- New "symstr" type for dynamic events that writes the name of the
function+offset into the ring buffer and not just the address
- Prevent kernel symbol processing on addresses in user space probes
(uprobes).
- And minor fixes and clean ups
* tag 'trace-probes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Reject symbol/symstr type for uprobe
tracing/probes: Add symstr type for dynamic events
kprobes: kretprobe events missing on 2-core KVM guest
kprobes: Fix check for probe enabled in kill_kprobe()
test_kprobes: Fix implicit declaration error of test_kprobes
tracing: Fix race where eprobes can be called before the event
Linus Torvalds [Thu, 22 Dec 2022 02:52:15 +0000 (18:52 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull RISC-V kvm updates from Paolo Bonzini:
- Allow unloading KVM module
- Allow KVM user-space to set mvendorid, marchid, and mimpid
- Several fixes and cleanups
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
RISC-V: KVM: Add ONE_REG interface for mvendorid, marchid, and mimpid
RISC-V: KVM: Save mvendorid, marchid, and mimpid when creating VCPU
RISC-V: Export sbi_get_mvendorid() and friends
RISC-V: KVM: Move sbi related struct and functions to kvm_vcpu_sbi.h
RISC-V: KVM: Use switch-case in kvm_riscv_vcpu_set/get_reg()
RISC-V: KVM: Remove redundant includes of asm/csr.h
RISC-V: KVM: Remove redundant includes of asm/kvm_vcpu_timer.h
RISC-V: KVM: Fix reg_val check in kvm_riscv_vcpu_set_reg_config()
RISC-V: KVM: Simplify kvm_arch_prepare_memory_region()
RISC-V: KVM: Exit run-loop immediately if xfer_to_guest fails
RISC-V: KVM: use vma_lookup() instead of find_vma_intersection()
RISC-V: KVM: Add exit logic to main.c
* tag 'block-6.2-2022-12-19' of git://git.kernel.dk/linux:
block: don't clear REQ_ALLOC_CACHE for non-polled requests
block: fix use-after-free of q->q_usage_counter
block, bfq: only do counting of pending-request for BFQ_GROUP_IOSCHED
blk-iolatency: Fix memory leak on add_disk() failures
loop: Fix the max_loop commandline argument treatment when it is set to 0
block/blk-iocost (gcc13): keep large values in a new enum
block, bfq: replace 0/1 with false/true in bic apis
block, bfq: don't return bfqg from __bfq_bic_change_cgroup()
block, bfq: fix possible uaf for 'bfqq->bic'
Linus Torvalds [Thu, 22 Dec 2022 00:28:25 +0000 (16:28 -0800)]
Merge tag 'io_uring-6.2-2022-12-19' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Improve the locking for timeouts. This was originally queued up for
the initial pull, but I messed up and it got missed. (Pavel)
- Fix an issue with running task_work from the wait path, causing some
inefficiencies (me)
- Add a clear of ->free_iov upfront in the 32-bit compat data
importing, so we ensure that it's always sane at completion time (me)
- Use call_rcu_hurry() for the eventfd signaling (Dylan)
- Ordering fix for multishot recv completions (Pavel)
- Add the io_uring trace header to the MAINTAINERS entry (Ammar)
* tag 'io_uring-6.2-2022-12-19' of git://git.kernel.dk/linux:
MAINTAINERS: io_uring: Add include/trace/events/io_uring.h
io_uring/net: fix cleanup after recycle
io_uring/net: ensure compat import handlers clear free_iov
io_uring: include task_work run after scheduling in wait for events
io_uring: don't use TIF_NOTIFY_SIGNAL to test for availability of task_work
io_uring: use call_rcu_hurry if signaling an eventfd
io_uring: fix overflow handling regression
io_uring: ease timeout flush locking requirements
io_uring: revise completion_lock locking
io_uring: protect cq_timeouts with timeout_lock
Liam Howlett [Mon, 19 Dec 2022 16:20:15 +0000 (16:20 +0000)]
maple_tree: fix mas_spanning_rebalance() on insufficient data
Mike Rapoport contacted me off-list with a regression in running criu.
Periodic tests fail with an RCU stall during execution. Although rare, it
is possible to hit this with other uses so this patch should be backported
to fix the regression.
This patchset adds the fix and a test case to the maple tree test
suite.
This patch (of 2):
An insufficient node was causing an out-of-bounds access on the node in
mas_leaf_max_gap(). The cause was the faulty detection of the new node
being a root node when overwriting many entries at the end of the tree.
Fix the detection of a new root and ensure there is sufficient data prior
to entering the spanning rebalance loop.
Mike Kravetz [Mon, 12 Dec 2022 23:50:41 +0000 (15:50 -0800)]
hugetlb: really allocate vma lock for all sharable vmas
Commit bbff39cc6cbc ("hugetlb: allocate vma lock for all sharable vmas")
removed the pmd sharable checks in the vma lock helper routines. However,
it left the functional version of helper routines behind #ifdef
CONFIG_ARCH_WANT_HUGE_PMD_SHARE. Therefore, the vma lock is not being
used for sharable vmas on architectures that do not support pmd sharing.
On these architectures, a potential fault/truncation race is exposed that
could leave pages in a hugetlb file past i_size until the file is removed.
Move the functional vma lock helpers outside the ifdef, and remove the
non-functional stubs. Since the vma lock is not just for pmd sharing,
rename the routine __vma_shareable_flags_pmd.
Arnd Bergmann [Thu, 15 Dec 2022 16:30:17 +0000 (17:30 +0100)]
kmsan: include linux/vmalloc.h
This is needed for the vmap/vunmap declarations:
mm/kmsan/kmsan_test.c:316:9: error: implicit declaration of function 'vmap' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
vbuf = vmap(pages, npages, VM_MAP, PAGE_KERNEL);
^
mm/kmsan/kmsan_test.c:316:29: error: use of undeclared identifier 'VM_MAP'
vbuf = vmap(pages, npages, VM_MAP, PAGE_KERNEL);
^
mm/kmsan/kmsan_test.c:322:3: error: implicit declaration of function 'vunmap' is invalid in C99 [-Werror,-Wimplicit-function-declaration]
vunmap(vbuf);
^
mm/mempolicy: fix memory leak in set_mempolicy_home_node system call
When encountering any vma in the range with policy other than MPOL_BIND or
MPOL_PREFERRED_MANY, an error is returned without issuing a mpol_put on
the policy just allocated with mpol_dup().
This allows arbitrary users to leak kernel memory.
Vlastimil Babka [Fri, 16 Dec 2022 16:32:27 +0000 (17:32 +0100)]
mm, mremap: fix mremap() expanding vma with addr inside vma
Since 6.1 we have noticed random rpm install failures that were tracked to
mremap() returning -ENOMEM and to commit ca3d76b0aa80 ("mm: add merging
after mremap resize").
The problem occurs when mremap() expands a VMA in place, but using an
starting address that's not vma->vm_start, but somewhere in the middle.
The extension_pgoff calculation introduced by the commit is wrong in that
case, so vma_merge() fails due to pgoffs not being compatible. Fix the
calculation.
By the way it seems that the situations, where rpm now expands a vma from
the middle, were made possible also due to that commit, thanks to the
improved vma merging. Yet it should work just fine, except for the buggy
calculation.
perf scripting python: Don't be strict at handling libtraceevent enumerations
The build was failing on archlinux because it has a newer libtraceevent
that added a new entry to the tep_print_arg_type enum:
19.72 archlinux:base : FAIL gcc version 12.2.0 (GCC)
util/scripting-engines/trace-event-python.c: In function ‘define_event_symbols’:
util/scripting-engines/trace-event-python.c:281:9: error: enumeration value ‘TEP_PRINT_CPUMASK’ not handled in switch [-Werror=switch-enum]
281 | switch (args->type) {
| ^~~~~~
cc1: all warnings being treated as errors
Since we build with distros that have different versions of
libtraceevent and there is no way to easily test if these enum entries
are available, just disable -Werror=switch-enum for that specific
object.
This patch isn't intended to have any effect on the compiled code. It
just removes one level of indirection: calling the *host* compiler to
build and then run a program that just printf:s the numerical entries of
the syscall-table. In other words, the generated syscalls.c changes
from:
[46] = "ftruncate",
to:
[__NR3264_ftruncate] = "ftruncate",
The latter is as good as the former to the user of perf, and this can be
done directly by the shell-script. The syscalls defined as non-literal
values (like "#define __NR_ftruncate __NR3264_ftruncate") are trivially
resolved at compile-time without namespace-leaking and/or collision for
its sole user, perf/util/syscalltbl.c, that just #includes the generated
file. A future "-mabi=32" support would probably have to handle this
differently, but that is a pre-existing problem not affected by this
simplification.
Calling the *host* compiler only complicates things and accidentally can
get a completely wrong set of files and syscall numbers, see earlier
commits. Note that the script parameter hostcc is now unused.
At the time of this patch, powerpc (the origin, see comments), and also
e.g. x86 has moved on, from filtering "gcc -dM -E" output to reading
separate specific text-file, a table of syscall numbers. IMHO should
arm64 consider adopting this.
Linus Torvalds [Wed, 21 Dec 2022 18:40:08 +0000 (10:40 -0800)]
Merge tag '6.2-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"cifs/smb3 client fixes, mostly related to reconnect and/or DFS:
- two important reconnect fixes: cases where status of recently
connected IPCs and shares were not being updated leaving them in an
incorrect state
- fix for older Windows servers that would return
STATUS_OBJECT_NAME_INVALID to query info requests on DFS links in a
namespace that contained non-ASCII characters, reducing number of
wasted roundtrips.
- fix for leaked -ENOMEM to userspace when cifs.ko couldn't perform
I/O due to a disconnected server, expired or deleted session.
- removal of all unneeded DFS related mount option string parsing
(now using fs_context for automounts)
- improve clarity/readability, moving various DFS related functions
out of fs/cifs/connect.c (which was getting too big to be readable)
to new file.
- Fix problem when large number of DFS connections. Allow sharing of
DFS connections and fix how the referral paths are matched
- Referral caching fix: Instead of looking up ipc connections to
refresh cached referrals, store direct dfs root server's IPC
pointer in new sessions so it can simply be accessed to either
refresh or create a new referral that such connections belong to.
- Fix to allow dfs root server's connections to also failover
- Optimized reconnect of nested DFS links
- Set correct status of IPC connections marked for reconnect"
* tag '6.2-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: don't leak -ENOMEM in smb2_open_file()
cifs: use origin fullpath for automounts
cifs: set correct status of tcon ipc when reconnecting
cifs: optimize reconnect of nested links
cifs: fix source pathname comparison of dfs supers
cifs: fix confusing debug message
cifs: don't block in dfs_cache_noreq_update_tgthint()
cifs: refresh root referrals
cifs: fix refresh of cached referrals
cifs: don't refresh cached referrals from unactive mounts
cifs: share dfs connections and supers
cifs: split out ses and tcon retrieval from mount_get_conns()
cifs: set resolved ip in sockaddr
cifs: remove unused smb3_fs_context::mount_options
cifs: get rid of mount options string parsing
cifs: use fs_context for automounts
cifs: reduce roundtrips on create/qinfo requests
cifs: set correct ipc status after initial tree connect
cifs: set correct tcon status after initial tree connect
Linus Torvalds [Wed, 21 Dec 2022 18:18:17 +0000 (10:18 -0800)]
Merge tag 'ntfs3_for_6.2' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs3 updates from Konstantin Komarov:
- added mount options 'hidedotfiles', 'nocase' and 'windows_names'
- fixed xfstests (tested on x86_64): generic/083 generic/263
generic/307 generic/465
- fix some logic errors
- code refactoring and dead code removal
* tag 'ntfs3_for_6.2' of https://github.com/Paragon-Software-Group/linux-ntfs3: (61 commits)
fs/ntfs3: Make if more readable
fs/ntfs3: Improve checking of bad clusters
fs/ntfs3: Fix wrong if in hdr_first_de
fs/ntfs3: Use ALIGN kernel macro
fs/ntfs3: Fix incorrect if in ntfs_set_acl_ex
fs/ntfs3: Check fields while reading
fs/ntfs3: Correct ntfs_check_for_free_space
fs/ntfs3: Restore correct state after ENOSPC in attr_data_get_block
fs/ntfs3: Changing locking in ntfs_rename
fs/ntfs3: Fixing wrong logic in attr_set_size and ntfs_fallocate
fs/ntfs3: atomic_open implementation
fs/ntfs3: Fix wrong indentations
fs/ntfs3: Change new sparse cluster processing
fs/ntfs3: Fixing work with sparse clusters
fs/ntfs3: Simplify ntfs_update_mftmirr function
fs/ntfs3: Remove unused functions
fs/ntfs3: Fix sparse problems
fs/ntfs3: Add ntfs_bitmap_weight_le function and refactoring
fs/ntfs3: Use _le variants of bitops functions
fs/ntfs3: Add functions to modify LE bitmaps
...
Linus Torvalds [Wed, 21 Dec 2022 17:54:00 +0000 (09:54 -0800)]
Merge tag 'fs.mount.propagation.fix.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull mount propagation fix from Christian Brauner:
"The propagate_mnt() function handles mount propagation when creating
mounts and propagates the source mount tree @source_mnt to all
applicable nodes of the destination propagation mount tree headed by
@dest_mnt.
Unfortunately it contains a bug where it fails to terminate at peers
of @source_mnt when looking up copies of the source mount that become
masters for copies of the source mount tree mounted on top of slaves
in the destination propagation tree causing a NULL dereference.
This fixes that bug (with a long commit message for a seven character
fix but hopefully it'll help us fix issues faster in the future rather
than having to go through the pain of having to relearn everything
once more)"
* tag 'fs.mount.propagation.fix.v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
pnode: terminate at peers of source
perf build: Remove explicit reference to python 2.x devel files
If the libpython feature test (tools/build/feature/test-libpython.c)
fails, then the python-devel is missing, it doesn't mattere if it is for
python2 or 3, remove that explicit 2.x reference.
Sandipan Das [Wed, 14 Dec 2022 08:26:52 +0000 (13:56 +0530)]
perf vendor events amd: Add Zen 4 mapping
Add a regular expression in the map file so that appropriate JSON event
files are used for AMD Zen 4 processors. Restrict the regular expression
for AMD Zen 3 processors to known model ranges since they also belong to
Family 19h.
Sandipan Das [Wed, 14 Dec 2022 08:26:51 +0000 (13:56 +0530)]
perf vendor events amd: Add Zen 4 metrics
Add metrics taken from Section 2.1.15.2 "Performance Measurement" in
the Processor Programming Reference (PPR) for AMD Family 19h Model 11h
Revision B1 processors.
The recommended metrics are sourced from Table 27 "Guidance for Common
Performance Statistics with Complex Event Selects".
The pipeline utilization metrics are sourced from Table 28 "Guidance
for Pipeline Utilization Analysis Statistics". These are new to Zen 4
processors and useful for finding performance bottlenecks by analyzing
activity at different stages of the pipeline. Metric groups have been
added for Level 1 and Level 2 analysis.
Sandipan Das [Wed, 14 Dec 2022 08:26:50 +0000 (13:56 +0530)]
perf vendor events amd: Add Zen 4 uncore events
Add uncore events taken from Section 2.1.15.5 "L3 Cache Performance
Monitor Counter"s and Section 7.1 "Fabric Performance Monitor Counter
(PMC) Events" in the Processor Programming Reference (PPR) for AMD
Family 19h Model 11h Revision B1 processors. This constitutes events
which capture L3 cache activity and data bandwidth for various links
and interfaces in the Data Fabric.
Sandipan Das [Wed, 14 Dec 2022 08:26:49 +0000 (13:56 +0530)]
perf vendor events amd: Add Zen 4 core events
Add core events taken from Section 2.1.15.4 "Core Performance Monitor
Counters" in the Processor Programming Reference (PPR) for AMD Family
19h Model 11h Revision B1 processors. This constitutes events which
capture op dispatch, execution and retirement, branch prediction, L1
and L2 cache activity, TLB activity, etc.
Update the westmereep-dp events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged, unused json values are removed and the
version number bumped to v3 to match the perfmon mapfile.csv. This
increases consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:55:07 +0000 (22:55 -0800)]
perf vendor events intel: Refresh tigerlake metrics and events
Update the tigerlake metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are updated to version 1.08 and unused json values are
removed. The formatting changes increase consistency across the json
files.
Ian Rogers [Thu, 15 Dec 2022 06:55:05 +0000 (22:55 -0800)]
perf vendor events intel: Refresh skylakex metrics and events
Update the skylakex metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
order of metrics varies as TMA metrics are first converted and then
removed if perfmon versions are found. The events are updated with
fixes to uncore events and improved descriptions. uncore-other.json
changes due to events now being sorted. The formatting changes
increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:55:04 +0000 (22:55 -0800)]
perf vendor events intel: Refresh skylake metrics and events
Update the skylake metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:55:02 +0000 (22:55 -0800)]
perf vendor events intel: Refresh sapphirerapids metrics and events
Update the sapphirerapids metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
order of metrics varies as TMA metrics are first converted and then
removed if perfmon versions are found. The events are updated to 1.09,
in particular uncore, with fixes to uncore events and improved
descriptions. The formatting changes increase consistency across the
json files.
Ian Rogers [Thu, 15 Dec 2022 06:55:01 +0000 (22:55 -0800)]
perf vendor events intel: Refresh sandybridge metrics and events
Update the sandybridge metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
Update the meteorlake events using the new tooling from:
https://github.com/intel/perfmon
The events are unchanged but they are sorted and unused json values
are removed. This increases consistency across the json files. The
CPUID matching regular expression is updated to match the perfmon one.
Ian Rogers [Thu, 15 Dec 2022 06:54:56 +0000 (22:54 -0800)]
perf vendor events intel: Refresh jaketown metrics and events
Update the jaketown metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:54:55 +0000 (22:54 -0800)]
perf vendor events intel: Refresh ivytown metrics and events
Update the ivytown metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:54:54 +0000 (22:54 -0800)]
perf vendor events intel: Refresh ivybridge metrics and events
Update the ivybridge metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but the version number is 23 to match the perfmon
version. In the events unused json values are removed. The formatting
changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:54:53 +0000 (22:54 -0800)]
perf vendor events intel: Refresh icelakex metrics and events
Update the icelakex metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
order of metrics varies as TMA metrics are first converted and then
removed if perfmon versions are found. The events are updated to 1.17,
in particular uncore, with fixes to uncore events and improved
descriptions. The formatting changes increase consistency across the
json files.
Ian Rogers [Thu, 15 Dec 2022 06:54:52 +0000 (22:54 -0800)]
perf vendor events intel: Refresh icelake metrics and events
Update the icelake metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:54:51 +0000 (22:54 -0800)]
perf vendor events intel: Refresh haswellx metrics and events
Update the haswellx metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
order of metrics varies as TMA metrics are first converted and then
removed if perfmon versions are found. The events are updated with
fixes to uncore events and improved descriptions. The formatting
changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:54:50 +0000 (22:54 -0800)]
perf vendor events intel: Refresh haswell metrics and events
Update the haswell metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed. The
formatting changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:49:53 +0000 (22:49 -0800)]
perf vendor events intel: Refresh cascadelakex metrics and events
Update the cascadelakex metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
order of metrics varies as TMA metrics are first converted and then
removed if perfmon versions are found. The events are updated with
fixes to uncore events and improved descriptions. The formatting
changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:49:52 +0000 (22:49 -0800)]
perf vendor events intel: Refresh broadwellx metrics and events
Update the broadwellx metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
order of metrics varies as TMA metrics are first converted and then
removed if perfmon versions are found. The events are updated with
fixes to uncore events and improved descriptions. The formatting
changes increase consistency across the json files.
Ian Rogers [Thu, 15 Dec 2022 06:49:51 +0000 (22:49 -0800)]
perf vendor events intel: Refresh broadwellde metrics and events
Update the broadwellde metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics vary as tma_false_sharing, MEM_Parallel_Requests and
MEM_Request_Latency are explicitly dropped from having missing events:
https://github.com/captain5050/perfmon/blob/main/scripts/create_perf_json.py#L934
The formulas also differ due to parentheses, use of exponents and
removal of redundant operations like "* 1". The events are unchanged
but unused json values are removed and implicit umasks of 0 are
dropped. This increases consistency across the json files.
mapfile.csv's version number is set to match that in the perfmon
repository.
Ian Rogers [Thu, 15 Dec 2022 06:47:28 +0000 (22:47 -0800)]
perf vendor events intel: Refresh broadwell metrics and events
Update the broadwell metrics and events using the new tooling from:
https://github.com/intel/perfmon
The metrics are unchanged but the formulas differ due to parentheses,
use of exponents and removal of redundant operations like "* 1". The
events are unchanged but unused json values are removed, implicit
umasks of 0 are dropped and duplicate short and long descriptions have
the long one dropped. This increases consistency across the json
files.
Ian Rogers [Thu, 15 Dec 2022 06:47:24 +0000 (22:47 -0800)]
perf test pmu-events: Fake PMU metric workaround
We test metrics with fake events with fake values. The fake values may
yield division by zero and so we count both up and down to try to
avoid this. Unfortunately this isn't sufficient for some metrics and
so don't fail the test for them.
Likewise, modify ->cmp() callback to compare sample address and map
address. And add ->collapse() and ->sort() to check the actual
srcfile string. Also add ->init() to make sure it has the srcfile.
Namhyung Kim [Thu, 15 Dec 2022 19:28:16 +0000 (11:28 -0800)]
perf hist: Improve srcfile sort key performance
Likewise, modify ->cmp() callback to compare sample address and map
address. And add ->collapse() and ->sort() to check the actual
srcfile string. Also add ->init() to make sure it has the srcfile.
Namhyung Kim [Thu, 15 Dec 2022 19:28:15 +0000 (11:28 -0800)]
perf hist: Improve srcline sort key performance
The sort_entry->cmp() will be called for eventy sample data to find a
matching entry. When it has 'srcline' sort key, that means it needs to
call addr2line or libbfd everytime.
This is not optimal because many samples will have same address and it
just can call addr2line once. So postpone the actual srcline check to
the sort_entry->collpase() and compare addresses in ->cmp().
Also it needs to add ->init() callback to make sure it has srcline info.
If a sample has a unique data, chances are the entry can be sorted out
by other (previous) keys and callbacks in sort_srcline never called.
Namhyung Kim [Thu, 15 Dec 2022 19:28:14 +0000 (11:28 -0800)]
perf hist: Add perf_hpp_fmt->init() callback
In __hists__insert_output_entry(), it calls fmt->sort() for dynamic
entries with NULL to update column width for tracepoint fields.
But it's a hacky abuse of the sort callback, better to have a proper
callback for that. I'll add more use cases later.
projects / linux.git / log