arm64.nomte [ARM64] Unconditionally disable Memory Tagging Extension
support
+ arm64.nosve [ARM64] Unconditionally disable Scalable Vector
+ Extension support
+
+ arm64.nosme [ARM64] Unconditionally disable Scalable Matrix
+ Extension support
+
ataflop= [HW,M68k]
atarimouse= [HW,MOUSE] Atari Mouse
nosocket -- Disable socket memory accounting.
nokmem -- Disable kernel memory accounting.
- checkreqprot [SELINUX] Set initial checkreqprot flag value.
+ checkreqprot= [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
See security/selinux/Kconfig help text.
0 -- check protection applied by kernel (includes
nopku [X86] Disable Memory Protection Keys CPU feature found
in some Intel CPUs.
- <module>.async_probe [KNL]
- Enable asynchronous probe on this module.
+ <module>.async_probe[=<bool>] [KNL]
+ If no <bool> value is specified or if the value
+ specified is not a valid <bool>, enable asynchronous
+ probe on this module. Otherwise, enable/disable
+ asynchronous probe on this module as indicated by the
+ <bool> value. See also: module.async_probe
early_ioremap_debug [KNL]
Enable debug messages in early_ioremap support. This
(in particular on some ATI chipsets).
The kernel tries to set a reasonable default.
- enforcing [SELINUX] Set initial enforcing status.
+ enforcing= [SELINUX] Set initial enforcing status.
Format: {"0" | "1"}
See security/selinux/Kconfig help text.
0 -- permissive (log only, no denials).
hlt [BUGS=ARM,SH]
+ hostname= [KNL] Set the hostname (aka UTS nodename).
+ Format: <string>
+ This allows setting the system's hostname during early
+ startup. This sets the name returned by gethostname.
+ Using this parameter to set the hostname makes it
+ possible to ensure the hostname is correctly set before
+ any userspace processes run, avoiding the possibility
+ that a process may call gethostname before the hostname
+ has been explicitly set, resulting in the calling
+ process getting an incorrect result. The string must
+ not exceed the maximum allowed hostname length (usually
+ 64 characters) and will be truncated otherwise.
+
hpet= [X86-32,HPET] option to control HPET usage
Format: { enable (default) | disable | force |
verbose }
Built with CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON=y,
the default is on.
- This is not compatible with memory_hotplug.memmap_on_memory.
- If both parameters are enabled, hugetlb_free_vmemmap takes
- precedence over memory_hotplug.memmap_on_memory.
+ Note that the vmemmap pages may be allocated from the added
+ memory block itself when memory_hotplug.memmap_on_memory is
+ enabled, those vmemmap pages cannot be optimized even if this
+ feature is enabled. Other vmemmap pages not allocated from
+ the added memory block itself do not be affected.
hung_task_panic=
[KNL] Should the hung task detector generate panics.
ivrs_ioapic [HW,X86-64]
Provide an override to the IOAPIC-ID<->DEVICE-ID
- mapping provided in the IVRS ACPI table. For
- example, to map IOAPIC-ID decimal 10 to
- PCI device 00:14.0 write the parameter as:
+ mapping provided in the IVRS ACPI table.
+ By default, PCI segment is 0, and can be omitted.
+ For example:
+ * To map IOAPIC-ID decimal 10 to PCI device 00:14.0
+ write the parameter as:
ivrs_ioapic[10]=00:14.0
+ * To map IOAPIC-ID decimal 10 to PCI segment 0x1 and
+ PCI device 00:14.0 write the parameter as:
+ ivrs_ioapic[10]=0001:00:14.0
ivrs_hpet [HW,X86-64]
Provide an override to the HPET-ID<->DEVICE-ID
- mapping provided in the IVRS ACPI table. For
- example, to map HPET-ID decimal 0 to
- PCI device 00:14.0 write the parameter as:
+ mapping provided in the IVRS ACPI table.
+ By default, PCI segment is 0, and can be omitted.
+ For example:
+ * To map HPET-ID decimal 0 to PCI device 00:14.0
+ write the parameter as:
ivrs_hpet[0]=00:14.0
+ * To map HPET-ID decimal 10 to PCI segment 0x1 and
+ PCI device 00:14.0 write the parameter as:
+ ivrs_ioapic[10]=0001:00:14.0
ivrs_acpihid [HW,X86-64]
Provide an override to the ACPI-HID:UID<->DEVICE-ID
- mapping provided in the IVRS ACPI table. For
- example, to map UART-HID:UID AMD0020:0 to
- PCI device 00:14.5 write the parameter as:
+ mapping provided in the IVRS ACPI table.
+
+ For example, to map UART-HID:UID AMD0020:0 to
+ PCI segment 0x1 and PCI device ID 00:14.5,
+ write the parameter as:
+ ivrs_acpihid[0001:00:14.5]=AMD0020:0
+
+ By default, PCI segment is 0, and can be omitted.
+ For example, PCI device 00:14.5 write the parameter as:
ivrs_acpihid[00:14.5]=AMD0020:0
js= [HW,JOY] Analog joystick
the KVM_CLEAR_DIRTY ioctl, and only for the pages being
cleared.
- Eager page splitting currently only supports splitting
- huge pages mapped by the TDP MMU.
+ Eager page splitting is only supported when kvm.tdp_mmu=Y.
Default is Y (on).
[KNL,X86,ARM] Boolean flag to enable this feature.
Format: {on | off (default)}
When enabled, runtime hotplugged memory will
- allocate its internal metadata (struct pages)
- from the hotadded memory which will allow to
- hotadd a lot of memory without requiring
- additional memory to do so.
+ allocate its internal metadata (struct pages,
+ those vmemmap pages cannot be optimized even
+ if hugetlb_free_vmemmap is enabled) from the
+ hotadded memory which will allow to hotadd a
+ lot of memory without requiring additional
+ memory to do so.
This feature is disabled by default because it
has some implication on large (e.g. GB)
allocations in some configurations (e.g. small
Note that even when enabled, there are a few cases where
the feature is not effective.
- This is not compatible with hugetlb_free_vmemmap. If
- both parameters are enabled, hugetlb_free_vmemmap takes
- precedence over memory_hotplug.memmap_on_memory.
-
memtest= [KNL,X86,ARM,M68K,PPC,RISCV] Enable memtest
Format: <integer>
default : 0 <disable>
mem_encrypt=on: Activate SME
mem_encrypt=off: Do not activate SME
- Refer to Documentation/virt/kvm/amd-memory-encryption.rst
+ Refer to Documentation/virt/kvm/x86/amd-memory-encryption.rst
for details on when memory encryption can be activated.
mem_sleep_default= [SUSPEND] Default system suspend mode:
improves system performance, but it may also
expose users to several CPU vulnerabilities.
Equivalent to: nopti [X86,PPC]
- kpti=0 [ARM64]
+ if nokaslr then kpti=0 [ARM64]
nospectre_v1 [X86,PPC]
nobp=0 [S390]
nospectre_v2 [X86,PPC,S390,ARM64]
no_entry_flush [PPC]
no_uaccess_flush [PPC]
mmio_stale_data=off [X86]
+ retbleed=off [X86]
Exceptions:
This does not have any effect on
mds=full,nosmt [X86]
tsx_async_abort=full,nosmt [X86]
mmio_stale_data=full,nosmt [X86]
+ retbleed=auto,nosmt [X86]
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
For details see:
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
+ module.async_probe=<bool>
+ [KNL] When set to true, modules will use async probing
+ by default. To enable/disable async probing for a
+ specific module, use the module specific control that
+ is documented under <module>.async_probe. When both
+ module.async_probe and <module>.async_probe are
+ specified, <module>.async_probe takes precedence for
+ the specific module.
+
module.sig_enforce
[KNL] When CONFIG_MODULE_SIG is set, this means that
modules without (valid) signatures will fail to load.
noautogroup Disable scheduler automatic task group creation.
- nobats [PPC] Do not use BATs for mapping kernel lowmem
- on "Classic" PPC cores.
-
nocache [ARM]
nodsp [SH] Disable hardware DSP at boot time.
just as if they had also been called out in the
rcu_nocbs= boot parameter.
+ Note that this argument takes precedence over
+ the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
+
noiotrap [SH] Disables trapped I/O port accesses.
noirqdebug [X86-32] Disables the code which attempts to detect and
nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
- noltlbs [PPC] Do not use large page/tlb entries for kernel
- lowmem mapping on PPC40x and PPC8xx
-
nomca [IA-64] Disable machine check abort handling
nomce [X86-32] Disable Machine Check Exception
noreplace-smp [X86-32,SMP] Don't replace SMP instructions
with UP alternatives
- nordrand [X86] Disable kernel use of the RDRAND and
- RDSEED instructions even if they are supported
- by the processor. RDRAND and RDSEED are still
- available to user space applications.
-
noresume [SWSUSP] Disables resume and restores original swap
space.
no-callback mode from boot but the mode may be
toggled at runtime via cpusets.
+ Note that this argument takes precedence over
+ the CONFIG_RCU_NOCB_CPU_DEFAULT_ALL option.
+
rcu_nocb_poll [KNL]
Rather than requiring that offloaded CPUs
(specified by rcu_nocbs= above) explicitly
When RCU_NOCB_CPU is set, also adjust the
priority of NOCB callback kthreads.
+ rcutree.rcu_divisor= [KNL]
+ Set the shift-right count to use to compute
+ the callback-invocation batch limit bl from
+ the number of callbacks queued on this CPU.
+ The result will be bounded below by the value of
+ the rcutree.blimit kernel parameter. Every bl
+ callbacks, the softirq handler will exit in
+ order to allow the CPU to do other work.
+
+ Please note that this callback-invocation batch
+ limit applies only to non-offloaded callback
+ invocation. Offloaded callbacks are instead
+ invoked in the context of an rcuoc kthread, which
+ scheduler will preempt as it does any other task.
+
+ rcutree.nocb_nobypass_lim_per_jiffy= [KNL]
+ On callback-offloaded (rcu_nocbs) CPUs,
+ RCU reduces the lock contention that would
+ otherwise be caused by callback floods through
+ use of the ->nocb_bypass list. However, in the
+ common non-flooded case, RCU queues directly to
+ the main ->cblist in order to avoid the extra
+ overhead of the ->nocb_bypass list and its lock.
+ But if there are too many callbacks queued during
+ a single jiffy, RCU pre-queues the callbacks into
+ the ->nocb_bypass queue. The definition of "too
+ many" is supplied by this kernel boot parameter.
+
rcutree.rcu_nocb_gp_stride= [KNL]
Set the number of NOCB callback kthreads in
each group, which defaults to the square root
retain_initrd [RAM] Keep initrd memory after extraction
+ retbleed= [X86] Control mitigation of RETBleed (Arbitrary
+ Speculative Code Execution with Return Instructions)
+ vulnerability.
+
+ off - no mitigation
+ auto - automatically select a migitation
+ auto,nosmt - automatically select a mitigation,
+ disabling SMT if necessary for
+ the full mitigation (only on Zen1
+ and older without STIBP).
+ ibpb - mitigate short speculation windows on
+ basic block boundaries too. Safe, highest
+ perf impact.
+ unret - force enable untrained return thunks,
+ only effective on AMD f15h-f17h
+ based systems.
+ unret,nosmt - like unret, will disable SMT when STIBP
+ is not available.
+
+ Selecting 'auto' will choose a mitigation method at run
+ time according to the CPU.
+
+ Not specifying this option is equivalent to retbleed=auto.
+
rfkill.default_state=
0 "airplane mode". All wifi, bluetooth, wimax, gps, fm,
etc. communication is blocked by default.
cache (risks via metadata attacks are mostly
unchanged). Debug options disable merging on their
own.
- For more information see Documentation/vm/slub.rst.
+ For more information see Documentation/mm/slub.rst.
slab_max_order= [MM, SLAB]
Determines the maximum allowed order for slabs.
slub_debug can create guard zones around objects and
may poison objects when not in use. Also tracks the
last alloc / free. For more information see
- Documentation/vm/slub.rst.
+ Documentation/mm/slub.rst.
slub_max_order= [MM, SLUB]
Determines the maximum allowed order for slabs.
A high setting may cause OOMs due to memory
fragmentation. For more information see
- Documentation/vm/slub.rst.
+ Documentation/mm/slub.rst.
slub_min_objects= [MM, SLUB]
The minimum number of objects per slab. SLUB will
the number of objects indicated. The higher the number
of objects the smaller the overhead of tracking slabs
and the less frequently locks need to be acquired.
- For more information see Documentation/vm/slub.rst.
+ For more information see Documentation/mm/slub.rst.
slub_min_order= [MM, SLUB]
Determines the minimum page order for slabs. Must be
lower than slub_max_order.
- For more information see Documentation/vm/slub.rst.
+ For more information see Documentation/mm/slub.rst.
slub_merge [MM, SLUB]
Same with slab_merge.
eibrs - enhanced IBRS
eibrs,retpoline - enhanced IBRS + Retpolines
eibrs,lfence - enhanced IBRS + LFENCE
+ ibrs - use IBRS to protect kernel
Not specifying this option is equivalent to
spectre_v2=auto.
expediting. Set to zero to disable automatic
expediting.
+ srcutree.srcu_max_nodelay [KNL]
+ Specifies the number of no-delay instances
+ per jiffy for which the SRCU grace period
+ worker thread will be rescheduled with zero
+ delay. Beyond this limit, worker thread will
+ be rescheduled with a sleep delay of one jiffy.
+
+ srcutree.srcu_max_nodelay_phase [KNL]
+ Specifies the per-grace-period phase, number of
+ non-sleeping polls of readers. Beyond this limit,
+ grace period worker thread will be rescheduled
+ with a sleep delay of one jiffy, between each
+ rescan of the readers, for a grace period phase.
+
+ srcutree.srcu_retry_check_delay [KNL]
+ Specifies number of microseconds of non-sleeping
+ delay between each non-sleeping poll of readers.
+
srcutree.small_contention_lim [KNL]
Specifies the number of update-side contention
events per jiffy will be tolerated before
it if 0 is given (See Documentation/admin-guide/cgroup-v1/memory.rst)
swiotlb= [ARM,IA-64,PPC,MIPS,X86]
- Format: { <int> | force | noforce }
+ Format: { <int> [,<int>] | force | noforce }
<int> -- Number of I/O TLB slabs
+ <int> -- Second integer after comma. Number of swiotlb
+ areas with their own lock. Will be rounded up
+ to a power of 2.
force -- force using of bounce buffers even if they
wouldn't be automatically used by the kernel
noforce -- Never use bounce buffers (for debugging)
6LOWPAN GENERIC (BTLE/IEEE 802.15.4)
S: Maintained
F: include/uapi/linux/virtio_9p.h
F: net/9p/
+A64FX DIAG DRIVER
+S: Supported
+F: drivers/soc/fujitsu/a64fx-diag.c
+
A8293 MEDIA DRIVER
F: drivers/hwmon/abituguru3.c
ACCES 104-DIO-48E GPIO DRIVER
S: Maintained
F: drivers/gpio/gpio-104-dio-48e.c
ACCES 104-IDI-48 GPIO DRIVER
S: Maintained
F: drivers/gpio/gpio-104-idi-48.c
ACCES 104-IDIO-16 GPIO DRIVER
S: Maintained
F: drivers/gpio/gpio-104-idio-16.c
ACCES 104-QUAD-8 DRIVER
S: Maintained
F: drivers/counter/104-quad-8.c
ACCES PCI-IDIO-16 GPIO DRIVER
S: Maintained
F: drivers/gpio/gpio-pci-idio-16.c
ACCES PCIe-IDIO-24 GPIO DRIVER
S: Maintained
F: drivers/gpio/gpio-pcie-idio-24.c
ACPI VIOT DRIVER
S: Maintained
F: drivers/acpi/viot.c
F: Documentation/i2c/busses/i2c-ali1563.rst
F: drivers/i2c/busses/i2c-ali1563.c
+ALIBABA ELASTIC RDMA DRIVER
+S: Supported
+F: drivers/infiniband/hw/erdma
+F: include/uapi/rdma/erdma-abi.h
+
ALIENWARE WMI DRIVER
S: Maintained
F: Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
F: drivers/media/platform/sunxi/sun4i-csi/
+ALLWINNER A31 MIPI CSI-2 BRIDGE DRIVER
+S: Maintained
+T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml
+F: drivers/media/platform/sunxi/sun6i-mipi-csi2/
+
ALLWINNER CPUFREQ DRIVER
F: drivers/staging/media/sunxi/cedrus/
ALPHA PORT
AMD IOMMU (AMD-VI)
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
S: Maintained
-F: drivers/platform/x86/amd-pmc.*
+F: drivers/platform/x86/amd/pmc.c
AMD HSMP DRIVER
F: Documentation/x86/amd_hsmp.rst
F: arch/x86/include/asm/amd_hsmp.h
F: arch/x86/include/uapi/asm/amd_hsmp.h
-F: drivers/platform/x86/amd_hsmp.c
+F: drivers/platform/x86/amd/hsmp.c
AMD POWERPLAY AND SWSMU
AMD XGBE DRIVER
S: Supported
F: arch/arm64/boot/dts/amd/amd-seattle-xgbe*.dtsi
-M: Hridya Valsaraju <hridya@google.com>
+M: Carlos Llamas <cmllamas@google.com>
S: Supported
F: sound/aoa/
APEX EMBEDDED SYSTEMS STX104 IIO DRIVER
S: Maintained
F: drivers/iio/adc/stx104.c
W: http://www.aquantia.com
F: drivers/net/ethernet/aquantia/atlantic/aq_ptp*
+AR0521 ON SEMICONDUCTOR CAMERA SENSOR DRIVER
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/onnn,ar0521.yaml
+F: drivers/media/i2c/ar0521.c
+
ARASAN NAND CONTROLLER DRIVER
F: Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
F: Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
F: Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
-F: Documentation/devicetree/bindings/i2c/i2c-versatile.txt
+F: Documentation/devicetree/bindings/i2c/arm,i2c-versatile.yaml
F: Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
F: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
F: arch/arm/boot/dts/arm-realview-*
S: Maintained
W: https://asahilinux.org
F: Documentation/devicetree/bindings/arm/apple.yaml
F: Documentation/devicetree/bindings/arm/apple/*
F: Documentation/devicetree/bindings/clock/apple,nco.yaml
+F: Documentation/devicetree/bindings/dma/apple,admac.yaml
F: Documentation/devicetree/bindings/i2c/apple,i2c.yaml
F: Documentation/devicetree/bindings/interrupt-controller/apple,*
F: Documentation/devicetree/bindings/iommu/apple,dart.yaml
F: Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
F: arch/arm64/boot/dts/apple/
F: drivers/clk/clk-apple-nco.c
+F: drivers/dma/apple-admac.c
F: drivers/i2c/busses/i2c-pasemi-core.c
F: drivers/i2c/busses/i2c-pasemi-platform.c
F: drivers/iommu/apple-dart.c
S: Supported
Q: https://patchwork.ozlabs.org/project/linux-aspeed/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed.git
+F: Documentation/devicetree/bindings/arm/aspeed/
F: arch/arm/boot/dts/aspeed-*
F: arch/arm/mach-aspeed/
N: aspeed
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/coresight/linux.git
F: Documentation/ABI/testing/sysfs-bus-coresight-devices-*
-F: Documentation/devicetree/bindings/arm/coresight-cpu-debug.txt
-F: Documentation/devicetree/bindings/arm/coresight-cti.yaml
-F: Documentation/devicetree/bindings/arm/coresight.txt
-F: Documentation/devicetree/bindings/arm/ete.yaml
-F: Documentation/devicetree/bindings/arm/trbe.yaml
+F: Documentation/devicetree/bindings/arm/arm,coresight-*.yaml
+F: Documentation/devicetree/bindings/arm/arm,embedded-trace-extension.yaml
+F: Documentation/devicetree/bindings/arm/arm,trace-buffer-extension.yaml
F: Documentation/trace/coresight/*
F: drivers/hwtracing/coresight/*
F: include/dt-bindings/arm/coresight-cti-dt.h
S: Maintained
F: Documentation/devicetree/bindings/arm/hpe,gxp.yaml
+F: Documentation/devicetree/bindings/spi/hpe,gxp-spi.yaml
F: Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
F: arch/arm/boot/dts/hpe-bmc*
F: arch/arm/boot/dts/hpe-gxp*
F: arch/arm/mach-hpe/
F: drivers/clocksource/timer-gxp.c
+F: drivers/spi/spi-gxp.c
F: drivers/watchdog/gxp-wdt.c
ARM/IGEP MACHINE SUPPORT
F: Documentation/devicetree/bindings/arm/ste-*
F: Documentation/devicetree/bindings/arm/ux500.yaml
F: Documentation/devicetree/bindings/arm/ux500/
-F: Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
+F: Documentation/devicetree/bindings/i2c/st,nomadik-i2c.yaml
F: arch/arm/boot/dts/ste-*
F: arch/arm/mach-nomadik/
F: arch/arm/mach-ux500/
F: Documentation/devicetree/bindings/arm/npcm/*
F: arch/arm/boot/dts/nuvoton-npcm*
F: arch/arm/mach-npcm/
+F: arch/arm64/boot/dts/nuvoton/
F: drivers/*/*npcm*
F: drivers/*/*/*npcm*
F: include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
+F: include/dt-bindings/clock/nuvoton,npcm845-clk.h
ARM/NUVOTON WPCM450 ARCHITECTURE
N: oxnas
ARM/PALM TREO SUPPORT
-S: Maintained
-W: http://hackndev.com
+S: Orphan
F: arch/arm/mach-pxa/palmtreo.*
ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
ARM/QUALCOMM SUPPORT
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git
S: Maintained
F: Documentation/devicetree/bindings/arm/rda.yaml
F: Documentation/devicetree/bindings/gpio/gpio-rda.yaml
-F: Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.txt
+F: Documentation/devicetree/bindings/interrupt-controller/rda,8810pl-intc.yaml
F: Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
F: Documentation/devicetree/bindings/timer/rda,8810pl-timer.yaml
F: arch/arm/boot/dts/rda8810pl-*
C: irc://irc.libera.chat/renesas-soc
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
F: Documentation/devicetree/bindings/arm/renesas.yaml
+F: Documentation/devicetree/bindings/hwinfo/renesas,prr.yaml
+F: Documentation/devicetree/bindings/soc/renesas/
F: arch/arm64/boot/dts/renesas/
F: drivers/soc/renesas/
F: include/linux/soc/renesas/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
F: Documentation/arm/samsung/
F: Documentation/devicetree/bindings/arm/samsung/
+F: Documentation/devicetree/bindings/hwinfo/samsung,*
F: Documentation/devicetree/bindings/power/pd-samsung.yaml
F: Documentation/devicetree/bindings/soc/samsung/
F: arch/arm/boot/dts/exynos*
S: Maintained
+F: Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
F: drivers/media/platform/samsung/s5p-jpeg/
ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
C: irc://irc.libera.chat/renesas-soc
T: git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
F: Documentation/devicetree/bindings/arm/renesas.yaml
+F: Documentation/devicetree/bindings/soc/renesas/
F: arch/arm/boot/dts/emev2*
F: arch/arm/boot/dts/gr-peach*
F: arch/arm/boot/dts/iwg20d-q7*
N: stm32
N: stm
+ARM/SUNPLUS SP7021 SOC SUPPORT
+S: Maintained
+W: https://sunplus-tibbo.atlassian.net/wiki/spaces/doc/overview
+F: Documentation/devicetree/bindings/arm/sunplus,sp7021.yaml
+F: Documentation/devicetree/bindings/clock/sunplus,sp7021-clkc.yaml
+F: Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.yaml
+F: Documentation/devicetree/bindings/reset/sunplus,reset.yaml
+F: arch/arm/boot/dts/sunplus-sp7021*.dts*
+F: arch/arm/configs/sp7021_*defconfig
+F: arch/arm/mach-sunplus/
+F: drivers/irqchip/irq-sp7021-intc.c
+F: drivers/reset/reset-sunplus.c
+F: include/dt-bindings/clock/sunplus,sp7021-clkc.h
+F: include/dt-bindings/reset/sunplus,sp7021-reset.h
+
ARM/Synaptics SoC support
S: Supported
F: Documentation/devicetree/bindings/arm/ti/k3.yaml
+F: Documentation/devicetree/bindings/hwinfo/ti,k3-socinfo.yaml
F: arch/arm64/boot/dts/ti/Makefile
F: arch/arm64/boot/dts/ti/k3-*
F: include/dt-bindings/pinctrl/k3.h
F: Documentation/devicetree/bindings/media/aspeed-video.txt
F: drivers/media/platform/aspeed/
+ASPEED USB UDC DRIVER
+S: Maintained
+F: Documentation/devicetree/bindings/usb/aspeed,ast2600-udc.yaml
+F: drivers/usb/gadget/udc/aspeed_udc.c
+
ASUS NOTEBOOKS AND EEEPC ACPI/WMI EXTRAS DRIVERS
F: drivers/net/wireless/broadcom/b43legacy/
BACKLIGHT CLASS/SUBSYSTEM
-M: Lee Jones <lee.jones@linaro.org>
+M: Lee Jones <lee@kernel.org>
F: lib/cpumask.c
F: lib/find_bit.c
F: lib/find_bit_benchmark.c
-F: lib/nodemask.c
F: lib/test_bitmap.c
F: tools/include/linux/bitmap.h
F: tools/include/linux/find.h
F: Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
F: drivers/iio/accel/bma400*
-BPF (Safe dynamic programs and tools)
+BPF [GENERAL] (Safe Dynamic Programs and Tools)
+R: Song Liu <song@kernel.org>
S: Supported
W: https://bpf.io/
F: tools/bpf/
F: tools/lib/bpf/
F: tools/testing/selftests/bpf/
-N: bpf
-K: bpf
BPF JIT for ARM
S: Odd Fixes
F: arch/arm/net/
S: Supported
F: arch/arm64/net/
BPF JIT for MIPS (32-BIT AND 64-BIT)
S: Maintained
F: arch/mips/net/
BPF JIT for NFP NICs
S: Odd Fixes
F: drivers/net/ethernet/netronome/nfp/bpf/
BPF JIT for POWERPC (32-BIT AND 64-BIT)
S: Supported
F: arch/powerpc/net/
BPF JIT for RISC-V (32-bit)
S: Maintained
F: arch/riscv/net/
BPF JIT for RISC-V (64-bit)
S: Maintained
F: arch/riscv/net/
S: Supported
F: arch/s390/net/
BPF JIT for SPARC (32-BIT AND 64-BIT)
S: Odd Fixes
F: arch/sparc/net/
BPF JIT for X86 32-BIT
S: Odd Fixes
F: arch/x86/net/bpf_jit_comp32.c
BPF JIT for X86 64-BIT
S: Supported
F: arch/x86/net/
X: arch/x86/net/bpf_jit_comp32.c
-BPF LSM (Security Audit and Enforcement using BPF)
+BPF [CORE]
+S: Maintained
+F: kernel/bpf/verifier.c
+F: kernel/bpf/tnum.c
+F: kernel/bpf/core.c
+F: kernel/bpf/syscall.c
+F: kernel/bpf/dispatcher.c
+F: kernel/bpf/trampoline.c
+F: include/linux/bpf*
+F: include/linux/filter.h
+
+BPF [BTF]
+S: Maintained
+F: kernel/bpf/btf.c
+F: include/linux/btf*
+
+BPF [TRACING]
+S: Maintained
+F: kernel/trace/bpf_trace.c
+F: kernel/bpf/stackmap.c
+
+BPF [NETWORKING] (tc BPF, sock_addr)
+S: Maintained
+F: net/core/filter.c
+F: net/sched/act_bpf.c
+F: net/sched/cls_bpf.c
+
+BPF [NETWORKING] (struct_ops, reuseport)
+S: Maintained
+F: kernel/bpf/bpf_struct*
+
+BPF [SECURITY & LSM] (Security Audit and Enforcement using BPF)
F: kernel/bpf/bpf_lsm.c
F: security/bpf/
-BPF L7 FRAMEWORK
+BPF [STORAGE & CGROUPS]
+S: Maintained
+F: kernel/bpf/cgroup.c
+F: kernel/bpf/*storage.c
+F: kernel/bpf/bpf_lru*
+
+BPF [RINGBUF]
+S: Maintained
+F: kernel/bpf/ringbuf.c
+
+BPF [ITERATOR]
+S: Maintained
+F: kernel/bpf/*iter.c
+
+BPF [L7 FRAMEWORK] (sockmap)
F: net/ipv4/udp_bpf.c
F: net/unix/unix_bpf.c
-BPFTOOL
+BPF [LIBRARY] (libbpf)
+S: Maintained
+F: tools/lib/bpf/
+
+BPF [TOOLING] (bpftool)
S: Maintained
F: kernel/bpf/disasm.*
F: tools/bpf/bpftool/
+BPF [SELFTESTS] (Test Runners & Infrastructure)
+S: Maintained
+F: tools/testing/selftests/bpf/
+
+BPF [MISC]
+S: Odd Fixes
+K: (?:\b|_)bpf(?:\b|_)
+
BROADCOM B44 10/100 ETHERNET DRIVER
S: Maintained
T: git git://github.com/broadcom/stblinux.git
F: Documentation/devicetree/bindings/arm/bcm/brcm,bcmbca.yaml
-F: arch/arm/boot/dts/bcm47622.dtsi
-F: arch/arm/boot/dts/bcm947622.dts
+F: arch/arm64/boot/dts/broadcom/bcmbca/*
N: bcmbca
N: bcm[9]?47622
+N: bcm[9]?4912
+N: bcm[9]?63138
+N: bcm[9]?63146
+N: bcm[9]?63148
+N: bcm[9]?63158
+N: bcm[9]?63178
+N: bcm[9]?6756
+N: bcm[9]?6813
+N: bcm[9]?6846
+N: bcm[9]?6855
+N: bcm[9]?6856
+N: bcm[9]?6858
+N: bcm[9]?6878
BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
F: arch/arm/boot/dts/bcm47189*
F: arch/arm/boot/dts/bcm53573*
-BROADCOM BCM63XX ARM ARCHITECTURE
-S: Maintained
-T: git git://github.com/broadcom/stblinux.git
-N: bcm63xx
-
BROADCOM BCM63XX/BCM33XX UDC DRIVER
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
-F: Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+F: Documentation/devicetree/bindings/interconnect/samsung,exynos-bus.yaml
F: drivers/devfreq/exynos-bus.c
BUSLOGIC SCSI DRIVER
F: Documentation/devicetree/bindings/sound/cirrus,cs*
F: include/dt-bindings/sound/cs*
F: sound/pci/hda/cs*
+F: sound/pci/hda/hda_cs_dsp_ctl.*
F: sound/soc/codecs/cs*
CIRRUS LOGIC DSP FIRMWARE DRIVER
S: Supported
B: https://github.com/ClangBuiltLinux/linux/issues
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/clang/features
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
F: include/linux/cfi.h
F: kernel/cfi.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
F: Documentation/devicetree/bindings/clock/
F: drivers/clk/
+F: include/dt-bindings/clock/
F: include/linux/clk-pr*
F: include/linux/clk/
F: include/linux/of_clk.h
X: drivers/clk/clkdev.c
-COMMON INTERNET FILE SYSTEM CLIENT (CIFS)
+COMMON INTERNET FILE SYSTEM CLIENT (CIFS and SMB3)
S: Supported
-W: http://linux-cifs.samba.org/
+W: https://wiki.samba.org/index.php/LinuxCIFS
T: git git://git.samba.org/sfrench/cifs-2.6.git
F: Documentation/admin-guide/cifs/
F: fs/cifs/
S: Maintained
CONTEXT TRACKING
S: Maintained
F: kernel/context_tracking.c
F: include/linux/context_tracking*
F: drivers/hwmon/corsair-psu.c
COUNTER SUBSYSTEM
S: Maintained
+T: git https://git.linaro.org/people/william.gray/counter.git
F: Documentation/ABI/testing/sysfs-bus-counter
F: Documentation/driver-api/generic-counter.rst
F: drivers/counter/
F: drivers/net/ethernet/chelsio/cxgb3/
CXGB3 ISCSI DRIVER (CXGB3I)
-M: Karen Xie <kxie@chelsio.com>
+M: Varun Prakash <varun@chelsio.com>
S: Supported
W: http://www.chelsio.com
F: drivers/net/ethernet/chelsio/cxgb4/
CXGB4 ISCSI DRIVER (CXGB4I)
-M: Karen Xie <kxie@chelsio.com>
+M: Varun Prakash <varun@chelsio.com>
S: Supported
W: http://www.chelsio.com
S: Maintained
F: Documentation/ABI/testing/sysfs-kernel-mm-damon
F: Documentation/admin-guide/mm/damon/
-F: Documentation/vm/damon/
+F: Documentation/mm/damon/
F: include/linux/damon.h
F: include/trace/events/damon.h
F: mm/damon/
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git
F: Documentation/devicetree/bindings/devfreq/
+F: Documentation/devicetree/bindings/interconnect/mediatek,cci.yaml
F: drivers/devfreq/
F: include/linux/devfreq.h
F: include/trace/events/devfreq.h
F: Documentation/devicetree/bindings/input/da90??-onkey.txt
F: Documentation/devicetree/bindings/input/dlg,da72??.txt
F: Documentation/devicetree/bindings/mfd/da90*.txt
+F: Documentation/devicetree/bindings/mfd/da90*.yaml
F: Documentation/devicetree/bindings/regulator/dlg,da9*.yaml
F: Documentation/devicetree/bindings/regulator/da92*.txt
F: Documentation/devicetree/bindings/regulator/slg51000.txt
F: sound/soc/codecs/da[79]*.[ch]
DIAMOND SYSTEMS GPIO-MM GPIO DRIVER
S: Maintained
F: drivers/gpio/gpio-gpio-mm.c
F: Documentation/devicetree/bindings/dma/
F: Documentation/driver-api/dmaengine/
F: drivers/dma/
+F: include/dt-bindings/dma/
F: include/linux/dma/
F: include/linux/dmaengine.h
F: include/linux/of_dma.h
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
DMA MAPPING BENCHMARK
F: kernel/dma/map_benchmark.c
F: tools/testing/selftests/dma/
F: drivers/net/ethernet/freescale/dpaa2/dpaa2-switch*
F: drivers/net/ethernet/freescale/dpaa2/dpsw*
-DPT_I2O SCSI RAID DRIVER
-S: Maintained
-W: http://www.adaptec.com/
-F: drivers/scsi/dpt*
-F: drivers/scsi/dpt/
-
DRBD DRIVER
F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
F: drivers/gpu/drm/bridge/chipone-icn6211.c
+DRM DRIVER FOR EBBG FT8719 PANEL
+S: Maintained
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: Documentation/devicetree/bindings/display/panel/ebbg,ft8719.yaml
+F: drivers/gpu/drm/panel/panel-ebbg-ft8719.c
+
DRM DRIVER FOR FARADAY TVE200 TV ENCODER
S: Maintained
F: drivers/gpu/drm/i810/
F: include/uapi/drm/i810_drm.h
+DRM DRIVER FOR LOGICVC DISPLAY CONTROLLER
+S: Supported
+T: git git://anongit.freedesktop.org/drm/drm-misc
+F: drivers/gpu/drm/logicvc/
+
DRM DRIVER FOR LVDS PANELS
F: drivers/gpu/drm/savage/
F: include/uapi/drm/savage_drm.h
-DRM DRIVER FOR SIMPLE FRAMEBUFFERS
+DRM DRIVER FOR FIRMWARE FRAMEBUFFERS
S: Maintained
T: git git://anongit.freedesktop.org/drm/drm-misc
+F: drivers/gpu/drm/drm_aperture.c
F: drivers/gpu/drm/tiny/simpledrm.c
+F: drivers/video/aperture.c
+F: include/drm/drm_aperture.h
+F: include/linux/aperture.h
DRM DRIVER FOR SIS VIDEO CARDS
S: Orphan / Obsolete
S: Orphan / Obsolete
F: drivers/gpu/drm/tdfx/
+DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
+S: Maintained
+F: Documentation/devicetree/bindings/display/bridge/ti,dlpc3433.yaml
+F: drivers/gpu/drm/bridge/ti-dlpc3433.c
+
DRM DRIVER FOR TI SN65DSI86 BRIDGE CHIP
F: Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
DRM DRIVERS FOR EXYNOS
F: drivers/gpu/drm/imx/
F: drivers/gpu/ipu-v3/
+DRM DRIVERS FOR FREESCALE IMX BRIDGE
+S: Maintained
+F: Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-ldb.yaml
+F: Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-combiner.yaml
+F: Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pixel-link.yaml
+F: Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml
+F: drivers/gpu/drm/bridge/imx/
+
DRM DRIVERS FOR GMA500 (Poulsbo, Moorestown and derivative chipsets)
S: Supported
F: Documentation/devicetree/bindings/display/mediatek/
F: drivers/gpu/drm/mediatek/
+F: drivers/phy/mediatek/phy-mtk-dp.c
F: drivers/phy/mediatek/phy-mtk-hdmi*
F: drivers/phy/mediatek/phy-mtk-mipi*
S: Supported
T: git git://anongit.freedesktop.org/tegra/linux.git
-F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
F: Documentation/devicetree/bindings/gpu/host1x/
F: drivers/gpu/drm/tegra/
F: drivers/gpu/host1x/
DRM DRIVERS FOR V3D
S: Supported
T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.yaml
S: Maintained
F: drivers/net/ethernet/ibm/ehea/
+ELM327 CAN NETWORK DRIVER
+S: Maintained
+F: Documentation/networking/device_drivers/can/can327.rst
+F: drivers/net/can/can327.c
+
EM28XX VIDEO4LINUX DRIVER
F: drivers/media/usb/em28xx/
EMBEDDED LINUX
-M: Matt Mackall <mpm@selenic.com>
+M: Olivia Mackall <olivia@selenic.com>
S: Maintained
EROFS FILE SYSTEM
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs.git
F: include/linux/errseq.h
F: lib/errseq.c
+ESD CAN/USB DRIVERS
+S: Maintained
+F: drivers/net/can/usb/esd_usb.c
+
ET131X NETWORK DRIVER
S: Odd Fixes
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat.git
F: fs/exfat/
EXT2 FILE SYSTEM
EXYNOS SYSMMU (IOMMU) driver
S: Maintained
F: drivers/iommu/exynos-iommu.c
F: include/linux/fs_types.h
F: include/uapi/linux/fs.h
F: include/uapi/linux/openat2.h
-X: fs/io-wq.c
-X: fs/io-wq.h
-X: fs/io_uring.c
FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
S: Supported
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
F: include/linux/fortify-string.h
F: lib/test_fortify/*
F: scripts/test_fortify.sh
F: drivers/fpga/
F: include/linux/fpga/
+INTEL MAX10 BMC SECURE UPDATES
+S: Maintained
+F: Documentation/ABI/testing/sysfs-driver-intel-m10-bmc-sec-update
+F: drivers/fpga/intel-m10-bmc-sec-update.c
+
+MICROCHIP POLARFIRE FPGA DRIVERS
+S: Supported
+F: Documentation/devicetree/bindings/fpga/microchip,mpf-spi-fpga-mgr.yaml
+F: drivers/fpga/microchip-spi.c
+
FPU EMULATOR
S: Maintained
S: Maintained
F: drivers/video/fbdev/imxfb.c
-F: include/linux/platform_data/video-imxfb.h
FREESCALE IMX DDR PMU DRIVER
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
F: Documentation/kbuild/gcc-plugins.rst
F: scripts/Makefile.gcc-plugins
F: scripts/gcc-plugins/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git
F: Documentation/devicetree/bindings/phy/
F: drivers/phy/
+F: include/dt-bindings/phy/
F: include/linux/phy/
GENERIC PINCTRL I2C DEMULTIPLEXER DRIVER
S: Maintained
F: Documentation/devicetree/bindings/media/nxp,imx8mq-vpu.yaml
+F: Documentation/devicetree/bindings/media/rockchip,rk3568-vepu.yaml
F: Documentation/devicetree/bindings/media/rockchip-vpu.yaml
F: drivers/staging/media/hantro/
K: (devm_)?hwmon_device_(un)?register(|_with_groups|_with_info)
HARDWARE RANDOM NUMBER GENERATOR CORE
-M: Matt Mackall <mpm@selenic.com>
+M: Olivia Mackall <olivia@selenic.com>
S: Odd fixes
F: Documentation/admin-guide/perf/hisi-pmu.rst
F: drivers/perf/hisilicon
-HISILICON QM AND ZIP Controller DRIVER
+HISILICON HNS3 PMU DRIVER
+S: Supported
+F: Documentation/admin-guide/perf/hns3-pmu.rst
+F: drivers/perf/hisilicon/hns3_pmu.c
+
+HISILICON QM DRIVER
S: Maintained
-F: Documentation/ABI/testing/debugfs-hisi-zip
+F: drivers/crypto/hisilicon/Kconfig
+F: drivers/crypto/hisilicon/Makefile
F: drivers/crypto/hisilicon/qm.c
F: drivers/crypto/hisilicon/sgl.c
-F: drivers/crypto/hisilicon/zip/
F: include/linux/hisi_acc_qm.h
+HISILICON ZIP Controller DRIVER
+S: Maintained
+F: Documentation/ABI/testing/debugfs-hisi-zip
+F: drivers/crypto/hisilicon/zip/
+
HISILICON ROCE DRIVER
S: Maintained
-F: Documentation/vm/hmm.rst
+F: Documentation/mm/hmm.rst
F: include/linux/hmm*
F: lib/test_hmm*
F: mm/hmm*
S: Maintained
F: Documentation/ABI/testing/sysfs-kernel-mm-hugepages
F: Documentation/admin-guide/mm/hugetlbpage.rst
-F: Documentation/vm/hugetlbfs_reserv.rst
-F: Documentation/vm/vmemmap_dedup.rst
+F: Documentation/mm/hugetlbfs_reserv.rst
+F: Documentation/mm/vmemmap_dedup.rst
F: fs/hugetlbfs/
F: include/linux/hugetlb.h
F: mm/hugetlb.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux.git
F: Documentation/ABI/stable/sysfs-bus-vmbus
F: Documentation/ABI/testing/debugfs-hyperv
+F: Documentation/virt/hyperv
F: Documentation/networking/device_drivers/ethernet/microsoft/netvsc.rst
F: arch/arm64/hyperv
F: arch/arm64/include/asm/hyperv-tlfs.h
IDMAPPED MOUNTS
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git
F: Documentation/devicetree/bindings/iio/
F: drivers/iio/
F: drivers/staging/iio/
+F: include/dt-bindings/iio/
F: include/linux/iio/
F: tools/iio/
S: Maintained
F: drivers/video/fbdev/i810/
+INTEL 8255 GPIO DRIVER
+S: Maintained
+F: drivers/gpio/gpio-i8255.c
+F: drivers/gpio/gpio-i8255.h
+
INTEL ASoC DRIVERS
S: Supported
F: sound/soc/intel/
Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
F: drivers/dma/ioat*
-INTEL IADX DRIVER
+INTEL IDXD DRIVER
S: Supported
INTEL IOMMU (VT-d)
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
F: drivers/iommu/intel/
-F: include/linux/intel-iommu.h
F: include/linux/intel-svm.h
INTEL IOP-ADMA DMA DRIVER
INTEL PMIC MULTIFUNCTION DEVICE DRIVERS
-S: Maintained
+S: Supported
F: drivers/mfd/intel_soc_pmic*
F: include/linux/mfd/intel_soc_pmic*
F: fs/iomap/
F: include/linux/iomap.h
-IOMMU DRIVERS
+IOMMU DMA-API LAYER
+S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
+F: drivers/iommu/dma-iommu.c
+F: drivers/iommu/iova.c
+F: include/linux/dma-iommu.h
+F: include/linux/iova.h
+
+IOMMU SUBSYSTEM
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
S: Maintained
T: git git://git.kernel.dk/linux-block
T: git git://git.kernel.dk/liburing
-F: fs/io-wq.c
-F: fs/io-wq.h
-F: fs/io_uring.c
+F: io_uring/
F: include/linux/io_uring.h
F: include/uapi/linux/io_uring.h
F: tools/io_uring/
F: drivers/irqchip/
ISA
S: Maintained
F: Documentation/driver-api/isa.rst
F: drivers/base/isa.c
F: scripts/mod/
F: scripts/package/
+KERNEL HARDENING (not covered by other areas)
+S: Supported
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
+F: include/linux/overflow.h
+F: include/linux/randomize_kstack.h
+F: mm/usercopy.c
+K: \b(add|choose)_random_kstack_offset\b
+K: \b__check_(object_size|heap_object)\b
+
KERNEL JANITORS
S: Odd Fixes
KERNEL UNIT TESTING FRAMEWORK (KUnit)
S: Maintained
LINUX FOR POWERPC (32-BIT AND 64-BIT)
S: Supported
W: https://github.com/linuxppc/wiki/wiki
LOADPIN SECURITY MODULE
S: Supported
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git lsm/loadpin
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
F: Documentation/admin-guide/LSM/LoadPin.rst
F: security/loadpin/
F: Documentation/devicetree/bindings/*/maxim,max77693.yaml
F: Documentation/devicetree/bindings/*/maxim,max77843.yaml
F: Documentation/devicetree/bindings/clock/maxim,max77686.txt
-F: Documentation/devicetree/bindings/mfd/max77693.txt
F: drivers/*/*max77843.c
F: drivers/*/max14577*.c
F: drivers/*/max77686*.c
F: drivers/net/ieee802154/mcr20a.h
MEASUREMENT COMPUTING CIO-DAC IIO DRIVER
S: Maintained
F: drivers/iio/dac/cio-dac.c
F: Documentation/userspace-api/media/
F: drivers/media/
F: drivers/staging/media/
+F: include/dt-bindings/media/
F: include/linux/platform_data/media/
F: include/media/
F: include/uapi/linux/dvb/
MEDIATEK IOMMU DRIVER
S: Supported
MEDIATEK MEDIA DRIVER
S: Supported
F: Documentation/devicetree/bindings/media/mediatek,vcodec*.yaml
F: Documentation/devicetree/bindings/media/mediatek-vpu.txt
T: git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
T: quilt git://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new
F: include/linux/gfp.h
+F: include/linux/gfp_types.h
F: include/linux/memory_hotplug.h
F: include/linux/mm.h
F: include/linux/mmzone.h
S: Maintained
F: Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
+F: Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
F: drivers/net/dsa/microchip/*
F: include/linux/platform_data/microchip-ksz.h
F: net/dsa/tag_ksz.c
F: Documentation/devicetree/bindings/mtd/atmel-nand.txt
F: drivers/mtd/nand/raw/atmel/*
+MICROCHIP OTPC DRIVER
+S: Supported
+F: Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
+F: drivers/nvmem/microchip-otpc.c
+F: include/dt-bindings/nvmem/microchip,sama7g5-otpc.h
+
MICROCHIP PWM DRIVER
F: include/linux/cciss*.h
F: include/uapi/linux/cciss*.h
+MICROSOFT SURFACE AGGREGATOR TABLET-MODE SWITCH
+S: Maintained
+F: drivers/platform/surface/surface_aggregator_tabletsw.c
+
MICROSOFT SURFACE BATTERY AND AC DRIVERS
F: include/linux/surface_aggregator/
F: include/uapi/linux/surface_aggregator/
+MICROSOFT SURFACE SYSTEM AGGREGATOR HUB DRIVER
+S: Maintained
+F: drivers/platform/surface/surface_aggregator_hub.c
+
MICROTEK X6 SCANNER
S: Maintained
F: Documentation/mips/
F: arch/mips/
F: drivers/platform/mips/
+F: include/dt-bindings/mips/
MIPS BOSTON DEVELOPMENT BOARD
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git modules-next
F: include/linux/module.h
F: kernel/module/
+ F: scripts/module*
MONOLITHIC POWER SYSTEM PMIC DRIVER
F: drivers/media/i2c/mt9v111.c
MULTIFUNCTION DEVICES (MFD)
-M: Lee Jones <lee.jones@linaro.org>
+M: Lee Jones <lee@kernel.org>
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
F: Documentation/devicetree/bindings/mfd/
S: Maintained
F: net/sched/sch_netem.c
-NETERION 10GbE DRIVERS (s2io/vxge)
+NETERION 10GbE DRIVERS (s2io)
S: Supported
F: Documentation/networking/device_drivers/ethernet/neterion/s2io.rst
-F: Documentation/networking/device_drivers/ethernet/neterion/vxge.rst
F: drivers/net/ethernet/neterion/
NETFILTER
W: http://git.infradead.org/nvme.git
T: git://git.infradead.org/nvme.git
F: drivers/nvme/host/
-F: include/linux/nvme.h
+F: drivers/nvme/common/
+F: include/linux/nvme*
F: include/uapi/linux/nvme_ioctl.h
NVM EXPRESS FC TRANSPORT DRIVERS
F: drivers/net/phy/nxp-c45-tja11xx.c
NXP FSPI DRIVER
S: Maintained
F: sound/soc/codecs/tfa989x.c
NXP-NCI NFC DRIVER
-S: Supported
+S: Orphan
F: Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
F: drivers/nfc/nxp-nci
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
F: drivers/media/i2c/ov5693.c
OMNIVISION OV5695 SENSOR DRIVER
T: git git://linuxtv.org/media_tree.git
F: drivers/media/i2c/ov9734.c
+ONBOARD USB HUB DRIVER
+S: Maintained
+F: Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
+F: drivers/usb/misc/onboard_usb_hub.c
+
ONENAND FLASH DRIVER
S: Maintained
-F: Documentation/devicetree/bindings/i2c/i2c-ocores.txt
+F: Documentation/devicetree/bindings/i2c/opencores,i2c-ocores.yaml
F: Documentation/i2c/busses/i2c-ocores.rst
F: drivers/i2c/busses/i2c-ocores.c
F: include/linux/platform_data/i2c-ocores.h
S: Maintained
-F: Documentation/vm/page_table_check.rst
+F: Documentation/mm/page_table_check.rst
F: include/linux/page_table_check.h
F: mm/page_table_check.c
S: Maintained
F: drivers/pci/controller/dwc/*spear*
+PCI DRIVER FOR XILINX VERSAL CPM
+S: Maintained
+F: Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+F: drivers/pci/controller/pcie-xilinx-cpm.c
+
PCMCIA SUBSYSTEM
S: Odd Fixes
S: Maintained
PIN CONTROLLER - INTEL
-S: Maintained
+S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel.git
F: drivers/pinctrl/intel/
F: Documentation/devicetree/bindings/iio/chemical/plantower,pms7003.yaml
F: drivers/iio/chemical/pms7003.c
-PLATFORM FEATURE INFRASTRUCTURE
-S: Maintained
-F: arch/*/include/asm/platform-feature.h
-F: include/asm-generic/platform-feature.h
-F: include/linux/platform-feature.h
-F: kernel/platform-feature.c
-
PLDMFW LIBRARY
S: Maintained
PWM SUBSYSTEM
S: Maintained
Q: https://patchwork.ozlabs.org/project/linux-pwm/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git
-F: Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+F: Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml
F: Documentation/devicetree/bindings/pwm/
F: Documentation/driver-api/pwm.rst
F: drivers/gpio/gpio-mvebu.c
F: drivers/pwm/
F: drivers/video/backlight/pwm_bl.c
+F: include/dt-bindings/pwm/
F: include/linux/pwm.h
F: include/linux/pwm_backlight.h
K: pwm_(config|apply_state|ops)
QCOM AUDIO (ASoC) DRIVERS
-M: Banajit Goswami <bgoswami@codeaurora.org>
+M: Banajit Goswami <bgoswami@quicinc.com>
S: Supported
+F: include/dt-bindings/sound/qcom,wcd9335.h
+F: sound/soc/codecs/lpass-rx-macro.*
+F: sound/soc/codecs/lpass-tx-macro.*
F: sound/soc/codecs/lpass-va-macro.c
F: sound/soc/codecs/lpass-wsa-macro.*
F: sound/soc/codecs/msm8916-wcd-analog.c
F: sound/soc/codecs/wcd9335.*
F: sound/soc/codecs/wcd934x.c
F: sound/soc/codecs/wcd-clsh-v2.*
+F: sound/soc/codecs/wcd-mbhc-v2.*
F: sound/soc/codecs/wsa881x.c
+F: sound/soc/codecs/wsa883x.c
F: sound/soc/qcom/
QCOM EMBEDDED USB DEBUGGER (EUD)
F: Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
F: drivers/i2c/busses/i2c-qcom-cci.c
+QUALCOMM INTERCONNECT BWMON DRIVER
+S: Maintained
+F: Documentation/devicetree/bindings/interconnect/qcom,msm8998-bwmon.yaml
+F: drivers/soc/qcom/icc-bwmon.c
+
QUALCOMM IOMMU
S: Maintained
F: Documentation/devicetree/bindings/iio/adc/renesas,rzg2l-adc.yaml
F: drivers/iio/adc/rzg2l_adc.c
+RENESAS RZ/N1 A5PSW SWITCH DRIVER
+S: Maintained
+F: Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+F: Documentation/devicetree/bindings/net/pcs/renesas,rzn1-miic.yaml
+F: drivers/net/dsa/rzn1_a5psw*
+F: drivers/net/pcs/pcs-rzn1-miic.c
+F: include/dt-bindings/net/pcs-rzn1-miic.h
+F: include/linux/pcs-rzn1-miic.h
+F: net/dsa/tag_rzn1_a5psw.c
+
RENESAS RZ/N1 RTC CONTROLLER DRIVER
K: riscv
RISC-V/MICROCHIP POLARFIRE SOC SUPPORT
S: Supported
F: arch/riscv/boot/dts/microchip/
+F: drivers/char/hw_random/mpfs-rng.c
+F: drivers/clk/microchip/clk-mpfs.c
F: drivers/mailbox/mailbox-mpfs.c
+F: drivers/pci/controller/pcie-microchip-host.c
F: drivers/soc/microchip/
+F: drivers/spi/spi-microchip-core.c
+F: drivers/usb/musb/mpfs.c
F: include/soc/microchip/mpfs.h
RNBD BLOCK DRIVERS
S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
-F: Documentation/s390/vfio-ap.rst
+F: Documentation/s390/vfio-ap*
F: drivers/s390/crypto/vfio_ap*
S390 VFIO-CCW DRIVER
S: Supported
+F: arch/s390/kvm/pci*
F: drivers/vfio/pci/vfio_pci_zdev.c
F: include/uapi/linux/vfio_zdev.h
S: Supported
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git seccomp
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/seccomp
F: Documentation/userspace-api/seccomp_filter.rst
F: include/linux/seccomp.h
F: include/uapi/linux/seccomp.h
F: Documentation/admin-guide/security-bugs.rst
SECURITY SUBSYSTEM
S: Supported
W: http://kernsec.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm.git
F: security/
X: security/selinux/
S: Maintained
+F: Documentation/devicetree/bindings/net/sff,sfp.yaml
F: drivers/net/phy/phylink.c
F: drivers/net/phy/sfp*
F: include/linux/mdio/mdio-i2c.h
SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
S: Supported
W: http://www.ibm.com/developerworks/linux/linux390/
F: include/linux/sl?b*.h
F: mm/sl?b*
+SLCAN CAN NETWORK DRIVER
+S: Maintained
+F: drivers/net/can/slcan/
+
SLEEPABLE READ-COPY UPDATE (SRCU)
S: Supported
+Q: https://patchwork.kernel.org/project/linux-raid/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/song/md.git
F: drivers/md/Kconfig
F: drivers/md/Makefile
SOUND - SOUND OPEN FIRMWARE (SOF) DRIVERS
S: Supported
SPI NOR SUBSYSTEM
S: Maintained
STAGING - REALTEK RTL8188EU DRIVERS
S: Supported
F: drivers/staging/r8188eu/
SWIOTLB SUBSYSTEM
S: Supported
W: http://git.infradead.org/users/hch/dma-mapping.git
F: drivers/gpio/gpio-creg-snps.c
SYNOPSYS DESIGNWARE 8250 UART DRIVER
-S: Maintained
+S: Supported
F: drivers/tty/serial/8250/8250_dw.c
F: drivers/tty/serial/8250/8250_dwlib.*
F: drivers/tty/serial/8250/8250_lpss.c
F: drivers/mmc/host/sdhci-pci-dwc-mshc.c
SYSTEM CONFIGURATION (SYSCON)
-M: Lee Jones <lee.jones@linaro.org>
+M: Lee Jones <lee@kernel.org>
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
S: Maintained
-F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.yaml
F: drivers/staging/media/tegra-video/
TEGRA XUSB PADCTL DRIVER
F: Documentation/devicetree/bindings/thermal/
F: Documentation/driver-api/thermal/
F: drivers/thermal/
+F: include/dt-bindings/thermal/
F: include/linux/cpu_cooling.h
F: include/linux/thermal.h
F: include/uapi/linux/thermal.h
TRADITIONAL CHINESE DOCUMENTATION
S: Maintained
W: https://github.com/srcres258/linux-doc
T: git git://github.com/srcres258/linux-doc.git doc-zh-tw
F: Documentation/filesystems/ubifs.rst
F: fs/ubifs/
+UBLK USERSPACE BLOCK DRIVER
+S: Maintained
+F: drivers/block/ublk_drv.c
+F: include/uapi/linux/ublk_cmd.h
+
UCLINUX (M68KNOMMU AND COLDFIRE)
S: Maintained
F: drivers/ufs/host/ufs-mediatek*
+UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER RENESAS HOOKS
+S: Maintained
+F: drivers/ufs/host/ufs-renesas.c
+
UNSORTED BLOCK IMAGES (UBI)
S: Maintained
F: Documentation/filesystems/vfat.rst
F: fs/fat/
+F: tools/testing/selftests/filesystems/fat/
VFIO DRIVER
S: Maintained
F: Documentation/ABI/testing/sysfs-bus-vdpa
+F: Documentation/ABI/testing/sysfs-class-vduse
F: Documentation/devicetree/bindings/virtio/
F: drivers/block/virtio_blk.c
F: drivers/crypto/virtio/
-S: Maintained
+S: Odd fixes
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
F: Documentation/driver-api/vme.rst
F: drivers/staging/vme_user/
-F: drivers/vme/
-F: include/linux/vme*
VM SOCKETS (AF_VSOCK)
S: Maintained
F: drivers/input/tablet/wacom_serial4.c
+WANGXUN ETHERNET DRIVER
+S: Maintained
+F: Documentation/networking/device_drivers/ethernet/wangxun/txgbe.rst
+F: drivers/net/ethernet/wangxun/
+
WATCHDOG DEVICE DRIVERS
F: drivers/media/rc/winbond-cir.c
WINSYSTEMS EBC-C384 WATCHDOG DRIVER
S: Maintained
F: drivers/watchdog/ebc-c384_wdt.c
WINSYSTEMS WS16C48 GPIO DRIVER
S: Maintained
F: drivers/gpio/gpio-ws16c48.c
F: include/uapi/linux/xdp_diag.h
F: include/net/netns/xdp.h
F: net/xdp/
-F: samples/bpf/xdpsock*
-F: tools/lib/bpf/xsk*
+F: tools/testing/selftests/bpf/*xsk*
XEN BLOCK SUBSYSTEM
S: Supported
F: arch/x86/xen/*swiotlb*
YAMA SECURITY MODULE
S: Supported
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git yama/tip
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening
F: Documentation/admin-guide/LSM/Yama.rst
F: security/yama/
S: Maintained
-F: Documentation/vm/zsmalloc.rst
+F: Documentation/mm/zsmalloc.rst
F: include/linux/zsmalloc.h
F: mm/zsmalloc.c
with watches for key/keyring change notifications and device
notifications.
- See Documentation/watch_queue.rst
+ See Documentation/core-api/watch_queue.rst
config CROSS_MEMORY_ATTACH
bool "Enable process_vm_readv/writev syscalls"
config VIRT_CPU_ACCOUNTING_GEN
bool "Full dynticks CPU time accounting"
- depends on HAVE_CONTEXT_TRACKING
+ depends on HAVE_CONTEXT_TRACKING_USER
depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
depends on GENERIC_CLOCKEVENTS
select VIRT_CPU_ACCOUNTING
- select CONTEXT_TRACKING
+ select CONTEXT_TRACKING_USER
help
Select this option to enable task and CPU time accounting on full
dynticks systems. This accounting is implemented by watching every
config PAGE_COUNTER
bool
+config CGROUP_FAVOR_DYNMODS
+ bool "Favor dynamic modification latency reduction by default"
+ help
+ This option enables the "favordynmods" mount option by default
+ which reduces the latencies of dynamic cgroup modifications such
+ as task migrations and controller on/offs at the cost of making
+ hot path operations such as forks and exits more expensive.
+
+ Say N if unsure.
+
config MEMCG
bool "Memory controller"
select PAGE_COUNTER
# interpreter that classic socket filters depend on
config BPF
bool
+ select CRYPTO_LIB_SHA1
menuconfig EXPERT
bool "Configure standard kernel features (expert users)"
def_bool n
select SYSTEM_DATA_VERIFICATION
- menuconfig MODULES
- bool "Enable loadable module support"
- modules
- help
- Kernel modules are small pieces of compiled code which can
- be inserted in the running kernel, rather than being
- permanently built into the kernel. You use the "modprobe"
- tool to add (and sometimes remove) them. If you say Y here,
- many parts of the kernel can be built as modules (by
- answering M instead of Y where indicated): this is most
- useful for infrequently used options which are not required
- for booting. For more information, see the man pages for
- modprobe, lsmod, modinfo, insmod and rmmod.
-
- If you say Y here, you will need to run "make
- modules_install" to put the modules under /lib/modules/
- where modprobe can find them (you may need to be root to do
- this).
-
- If unsure, say Y.
-
- if MODULES
-
- config MODULE_FORCE_LOAD
- bool "Forced module loading"
- default n
- help
- Allow loading of modules without version information (ie. modprobe
- --force). Forced module loading sets the 'F' (forced) taint flag and
- is usually a really bad idea.
-
- config MODULE_UNLOAD
- bool "Module unloading"
- help
- Without this option you will not be able to unload any
- modules (note that some modules may not be unloadable
- anyway), which makes your kernel smaller, faster
- and simpler. If unsure, say Y.
-
- config MODULE_FORCE_UNLOAD
- bool "Forced module unloading"
- depends on MODULE_UNLOAD
- help
- This option allows you to force a module to unload, even if the
- kernel believes it is unsafe: the kernel will remove the module
- without waiting for anyone to stop using it (using the -f option to
- rmmod). This is mainly for kernel developers and desperate users.
- If unsure, say N.
-
- config MODULE_UNLOAD_TAINT_TRACKING
- bool "Tainted module unload tracking"
- depends on MODULE_UNLOAD
- default n
- help
- This option allows you to maintain a record of each unloaded
- module that tainted the kernel. In addition to displaying a
- list of linked (or loaded) modules e.g. on detection of a bad
- page (see bad_page()), the aforementioned details are also
- shown. If unsure, say N.
-
- config MODVERSIONS
- bool "Module versioning support"
- help
- Usually, you have to use modules compiled with your kernel.
- Saying Y here makes it sometimes possible to use modules
- compiled for different kernels, by adding enough information
- to the modules to (hopefully) spot any changes which would
- make them incompatible with the kernel you are running. If
- unsure, say N.
-
- config ASM_MODVERSIONS
- bool
- default HAVE_ASM_MODVERSIONS && MODVERSIONS
- help
- This enables module versioning for exported symbols also from
- assembly. This can be enabled only when the target architecture
- supports it.
-
- config MODULE_SRCVERSION_ALL
- bool "Source checksum for all modules"
- help
- Modules which contain a MODULE_VERSION get an extra "srcversion"
- field inserted into their modinfo section, which contains a
- sum of the source files which made it. This helps maintainers
- see exactly which source was used to build a module (since
- others sometimes change the module source without updating
- the version). With this option, such a "srcversion" field
- will be created for all modules. If unsure, say N.
-
- config MODULE_SIG
- bool "Module signature verification"
- select MODULE_SIG_FORMAT
- help
- Check modules for valid signatures upon load: the signature
- is simply appended to the module. For more information see
- <file:Documentation/admin-guide/module-signing.rst>.
-
- Note that this option adds the OpenSSL development packages as a
- kernel build dependency so that the signing tool can use its crypto
- library.
-
- You should enable this option if you wish to use either
- CONFIG_SECURITY_LOCKDOWN_LSM or lockdown functionality imposed via
- another LSM - otherwise unsigned modules will be loadable regardless
- of the lockdown policy.
-
- !!!WARNING!!! If you enable this option, you MUST make sure that the
- module DOES NOT get stripped after being signed. This includes the
- debuginfo strip done by some packagers (such as rpmbuild) and
- inclusion into an initramfs that wants the module size reduced.
-
- config MODULE_SIG_FORCE
- bool "Require modules to be validly signed"
- depends on MODULE_SIG
- help
- Reject unsigned modules or signed modules for which we don't have a
- key. Without this, such modules will simply taint the kernel.
-
- config MODULE_SIG_ALL
- bool "Automatically sign all modules"
- default y
- depends on MODULE_SIG || IMA_APPRAISE_MODSIG
- help
- Sign all modules during make modules_install. Without this option,
- modules must be signed manually, using the scripts/sign-file tool.
-
- comment "Do not forget to sign required modules with scripts/sign-file"
- depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL
-
- choice
- prompt "Which hash algorithm should modules be signed with?"
- depends on MODULE_SIG || IMA_APPRAISE_MODSIG
- help
- This determines which sort of hashing algorithm will be used during
- signature generation. This algorithm _must_ be built into the kernel
- directly so that signature verification can take place. It is not
- possible to load a signed module containing the algorithm to check
- the signature on that module.
-
- config MODULE_SIG_SHA1
- bool "Sign modules with SHA-1"
- select CRYPTO_SHA1
-
- config MODULE_SIG_SHA224
- bool "Sign modules with SHA-224"
- select CRYPTO_SHA256
-
- config MODULE_SIG_SHA256
- bool "Sign modules with SHA-256"
- select CRYPTO_SHA256
-
- config MODULE_SIG_SHA384
- bool "Sign modules with SHA-384"
- select CRYPTO_SHA512
-
- config MODULE_SIG_SHA512
- bool "Sign modules with SHA-512"
- select CRYPTO_SHA512
-
- endchoice
-
- config MODULE_SIG_HASH
- string
- depends on MODULE_SIG || IMA_APPRAISE_MODSIG
- default "sha1" if MODULE_SIG_SHA1
- default "sha224" if MODULE_SIG_SHA224
- default "sha256" if MODULE_SIG_SHA256
- default "sha384" if MODULE_SIG_SHA384
- default "sha512" if MODULE_SIG_SHA512
-
- choice
- prompt "Module compression mode"
- help
- This option allows you to choose the algorithm which will be used to
- compress modules when 'make modules_install' is run. (or, you can
- choose to not compress modules at all.)
-
- External modules will also be compressed in the same way during the
- installation.
-
- For modules inside an initrd or initramfs, it's more efficient to
- compress the whole initrd or initramfs instead.
-
- This is fully compatible with signed modules.
-
- Please note that the tool used to load modules needs to support the
- corresponding algorithm. module-init-tools MAY support gzip, and kmod
- MAY support gzip, xz and zstd.
-
- Your build system needs to provide the appropriate compression tool
- to compress the modules.
-
- If in doubt, select 'None'.
-
- config MODULE_COMPRESS_NONE
- bool "None"
- help
- Do not compress modules. The installed modules are suffixed
- with .ko.
-
- config MODULE_COMPRESS_GZIP
- bool "GZIP"
- help
- Compress modules with GZIP. The installed modules are suffixed
- with .ko.gz.
-
- config MODULE_COMPRESS_XZ
- bool "XZ"
- help
- Compress modules with XZ. The installed modules are suffixed
- with .ko.xz.
-
- config MODULE_COMPRESS_ZSTD
- bool "ZSTD"
- help
- Compress modules with ZSTD. The installed modules are suffixed
- with .ko.zst.
-
- endchoice
-
- config MODULE_DECOMPRESS
- bool "Support in-kernel module decompression"
- depends on MODULE_COMPRESS_GZIP || MODULE_COMPRESS_XZ
- select ZLIB_INFLATE if MODULE_COMPRESS_GZIP
- select XZ_DEC if MODULE_COMPRESS_XZ
- help
-
- Support for decompressing kernel modules by the kernel itself
- instead of relying on userspace to perform this task. Useful when
- load pinning security policy is enabled.
-
- If unsure, say N.
-
- config MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS
- bool "Allow loading of modules with missing namespace imports"
- help
- Symbols exported with EXPORT_SYMBOL_NS*() are considered exported in
- a namespace. A module that makes use of a symbol exported with such a
- namespace is required to import the namespace via MODULE_IMPORT_NS().
- There is no technical reason to enforce correct namespace imports,
- but it creates consistency between symbols defining namespaces and
- users importing namespaces they make use of. This option relaxes this
- requirement and lifts the enforcement when loading a module.
-
- If unsure, say N.
-
- config MODPROBE_PATH
- string "Path to modprobe binary"
- default "/sbin/modprobe"
- help
- When kernel code requests a module, it does so by calling
- the "modprobe" userspace utility. This option allows you to
- set the path where that binary is found. This can be changed
- at runtime via the sysctl file
- /proc/sys/kernel/modprobe. Setting this to the empty string
- removes the kernel's ability to request modules (but
- userspace can still load modules explicitly).
-
- config TRIM_UNUSED_KSYMS
- bool "Trim unused exported kernel symbols" if EXPERT
- depends on !COMPILE_TEST
- help
- The kernel and some modules make many symbols available for
- other modules to use via EXPORT_SYMBOL() and variants. Depending
- on the set of modules being selected in your kernel configuration,
- many of those exported symbols might never be used.
-
- This option allows for unused exported symbols to be dropped from
- the build. In turn, this provides the compiler more opportunities
- (especially when using LTO) for optimizing the code and reducing
- binary size. This might have some security advantages as well.
-
- If unsure, or if you need to build out-of-tree modules, say N.
-
- config UNUSED_KSYMS_WHITELIST
- string "Whitelist of symbols to keep in ksymtab"
- depends on TRIM_UNUSED_KSYMS
- help
- By default, all unused exported symbols will be un-exported from the
- build when TRIM_UNUSED_KSYMS is selected.
-
- UNUSED_KSYMS_WHITELIST allows to whitelist symbols that must be kept
- exported at all times, even in absence of in-tree users. The value to
- set here is the path to a text file containing the list of symbols,
- one per line. The path can be absolute, or relative to the kernel
- source tree.
-
- endif # MODULES
-
- config MODULES_TREE_LOOKUP
- def_bool y
- depends on PERF_EVENTS || TRACING || CFI_CLANG
+ source "kernel/module/Kconfig"
config INIT_ALL_POSSIBLE
bool
projects / linux.git / commitdiff