regulator: qcom_smd: add regulator ops for pm8941 lnldo

After "regulator: qcom_smd: add list_voltage callback" patch adding
pm8941 lnldo regulators would bug on list_voltages as it is a fixed
regulator without any linear range.
This patch fixes that issue by adding dedicated ops for pm8941 lnldo
without list_voltages callback.

Signed-off-by: Srinivas Kandagatla <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected] # v4.6

diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index b11b627a50dbeade24dc7422408417f2d5184dc2..6c7fe4778793758478d9a27e3f9d11f6d4b4a1b2 100644 (file)
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -148,6 +148,17 @@ static const struct regulator_ops rpm_smps_ldo_ops = {
        .set_load = rpm_reg_set_load,
 };
 
+static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
+       .enable = rpm_reg_enable,
+       .disable = rpm_reg_disable,
+       .is_enabled = rpm_reg_is_enabled,
+
+       .get_voltage = rpm_reg_get_voltage,
+       .set_voltage = rpm_reg_set_voltage,
+
+       .set_load = rpm_reg_set_load,
+};
+
 static const struct regulator_ops rpm_switch_ops = {
        .enable = rpm_reg_enable,
        .disable = rpm_reg_disable,
@@ -248,7 +259,7 @@ static const struct regulator_desc pm8941_nldo = {
 static const struct regulator_desc pm8941_lnldo = {
        .fixed_uV = 1740000,
        .n_voltages = 1,
-       .ops = &rpm_smps_ldo_ops,
+       .ops = &rpm_smps_ldo_ops_fixed,
 };
 
 static const struct regulator_desc pm8941_switch = {