arm64: dts: rockchip: Add Hugsun X99 IR receiver

Add the IR receiver and its associated pinctrl entry.

Tested with LibreElec linux-next-20200305

Signed-off-by: Vivek Unune <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Stuebner <[email protected]>

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
index ee4867fbefe852b333d43062efd4249b58bf8bec..9bd14bc0e7d5c7c1bd93e712d9f8d81daa33418d 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-hugsun-x99.dts
@@ -29,6 +29,13 @@
                regulator-max-microvolt = <5000000>;
        };
 
+       ir-receiver {
+               compatible = "gpio-ir-receiver";
+               gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&ir_rx>;
+       };
+
        vcc_sys: vcc-sys {
                compatible = "regulator-fixed";
                regulator-name = "vcc_sys";
@@ -483,6 +490,12 @@
                };
        };
 
+       ir {
+               ir_rx: ir-rx {
+                       rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
+               };
+       };
+
        pmic {
                pmic_int_l: pmic-int-l {
                        rockchip,pins =