Rockchip platforms device tree bindings
---------------------------------------
+- Asus Tinker board
+ Required root node properties:
+ - compatible = "asus,rk3288-tinker", "rockchip,rk3288";
- Kylin RK3036 board:
Required root node properties:
- compatible = "google,veyron-brain-rev0", "google,veyron-brain",
"google,veyron", "rockchip,rk3288";
+ - Google Gru (dev-board):
+ Required root node properties:
+ - compatible = "google,gru-rev15", "google,gru-rev14",
+ "google,gru-rev13", "google,gru-rev12",
+ "google,gru-rev11", "google,gru-rev10",
+ "google,gru-rev9", "google,gru-rev8",
+ "google,gru-rev7", "google,gru-rev6",
+ "google,gru-rev5", "google,gru-rev4",
+ "google,gru-rev3", "google,gru-rev2",
+ "google,gru", "rockchip,rk3399";
+
- Google Jaq (Haier Chromebook 11 and more):
Required root node properties:
- compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4",
"google,veyron-jerry-rev3", "google,veyron-jerry",
"google,veyron", "rockchip,rk3288";
+ - Google Kevin (Samsung Chromebook Plus):
+ Required root node properties:
+ - compatible = "google,kevin-rev15", "google,kevin-rev14",
+ "google,kevin-rev13", "google,kevin-rev12",
+ "google,kevin-rev11", "google,kevin-rev10",
+ "google,kevin-rev9", "google,kevin-rev8",
+ "google,kevin-rev7", "google,kevin-rev6",
+ "google,kevin", "google,gru", "rockchip,rk3399";
+
- Google Mickey (Asus Chromebit CS10):
Required root node properties:
- compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
Required root node properties:
- compatible = "mqmaker,miqi", "rockchip,rk3288";
+- Phytec phyCORE-RK3288: Rapid Development Kit
+ Required root node properties:
+ - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
- Rockchip PX3 Evaluation board:
Required root node properties:
- compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
Required root node properties:
- compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
+ - Rockchip RK3328 evb:
+ Required root node properties:
+ - compatible = "rockchip,rk3328-evb", "rockchip,rk3328";
+
- Rockchip RK3399 evb:
Required root node properties:
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
- SGRF, used for general secure system,
- PMUGRF, used for always on system
+On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
+
Required Properties:
- compatible: GRF should be one of the following:
- "rockchip,rk3188-grf", "syscon": for rk3188
- "rockchip,rk3228-grf", "syscon": for rk3228
- "rockchip,rk3288-grf", "syscon": for rk3288
+ - "rockchip,rk3328-grf", "syscon": for rk3328
- "rockchip,rk3368-grf", "syscon": for rk3368
- "rockchip,rk3399-grf", "syscon": for rk3399
- compatible: PMUGRF should be one of the following:
- "rockchip,rk3399-pmugrf", "syscon": for rk3399
- compatible: SGRF should be one of the following
- "rockchip,rk3288-sgrf", "syscon": for rk3288
+- compatible: USB2PHYGRF should be one of the followings
+ - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
- reg: physical base address of the controller and length of memory mapped
region.
buffalo Buffalo, Inc.
calxeda Calxeda
capella Capella Microsystems, Inc
+cascoda Cascoda, Ltd.
cavium Cavium, Inc.
cdns Cadence Design Systems Inc.
ceva Ceva, Inc.
devantech Devantech, Ltd.
digi Digi International Inc.
digilent Diglent, Inc.
+dioo Dioo Microcircuit Co., Ltd
dlg Dialog Semiconductor
dlink D-Link Corporation
dmo Data Modul AG
eukrea Eukréa Electromatique
everest Everest Semiconductor Co. Ltd.
everspin Everspin Technologies, Inc.
+exar Exar Corporation
excito Excito
ezchip EZchip Semiconductor
faraday Faraday Technology Corporation
honeywell Honeywell
hp Hewlett Packard
holtek Holtek Semiconductor, Inc.
+ hwacom HwaCom Systems Inc.
i2se I2SE GmbH
ibm International Business Machines (IBM)
idt Integrated Device Technologies, Inc.
karo Ka-Ro electronics GmbH
keithkoep Keith & Koep GmbH
keymile Keymile GmbH
+ khadas Khadas
kinetic Kinetic Technologies
kosagi Sutajio Ko-Usagi PTE Ltd.
kyo Kyocera Corporation
mcube mCube
meas Measurement Specialties
mediatek MediaTek Inc.
+megachips MegaChips
melexis Melexis N.V.
melfas MELFAS Inc.
memsic MEMSIC Inc.
ni National Instruments
nintendo Nintendo
nokia Nokia
+nordic Nordic Semiconductor
nuvoton Nuvoton Technology Corporation
nvd New Vision Display
nvidia NVIDIA
ricoh Ricoh Co. Ltd.
rikomagic Rikomagic Tech Corp. Ltd
rockchip Fuzhou Rockchip Electronics Co., Ltd
+rohm ROHM Semiconductor Co., Ltd
samsung Samsung Semiconductor
samtec Samtec/Softing company
sandisk Sandisk Corporation
schindler Schindler
seagate Seagate Technology PLC
semtech Semtech Corporation
+sensirion Sensirion AG
sgx SGX Sensortech
sharp Sharp Corporation
si-en Si-En Technology Ltd.
wetek WeTek Electronics, limited.
wexler Wexler
winbond Winbond Electronics corp.
+winstar Winstar Display Corp.
wlf Wolfson Microelectronics
wm Wondermedia Technologies, Inc.
x-powers X-Powers
clock-output-names = "osc32k";
};
+ iosc: internal-osc-clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ clock-accuracy = <300000000>;
+ clock-output-names = "iosc";
+ };
+
psci {
compatible = "arm,psci-0.2";
method = "smc";
usbphy: phy@01c19400 {
compatible = "allwinner,sun50i-a64-usb-phy";
reg = <0x01c19400 0x14>,
+ <0x01c1a800 0x4>,
<0x01c1b800 0x4>;
reg-names = "phy_ctrl",
+ "pmu0",
"pmu1";
clocks = <&ccu CLK_USB_PHY0>,
<&ccu CLK_USB_PHY1>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ r_ccu: clock@1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ r_pio: pinctrl@01f02c00 {
+ compatible = "allwinner,sun50i-a64-r-pinctrl";
+ reg = <0x01f02c00 0x400>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ #gpio-cells = <3>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
};
};
reg = <0x0 0x10000000 0x0 0x200000>;
no-map;
};
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0xbc00000>;
+ alignment = <0x0 0x400000>;
+ linux,cma-default;
+ };
};
cpus {
};
i2c_A: i2c@8500 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x08500 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
};
i2c_B: i2c@87c0 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087c0 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
};
i2c_C: i2c@87e0 {
- compatible = "amlogic,meson-gxbb-i2c";
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
reg = <0x0 0x087e0 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
status = "disabled";
};
+ spifc: spi@8c80 {
+ compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
+ reg = <0x0 0x08c80 0x0 0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
watchdog@98d0 {
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
reg = <0x0 0x098d0 0x0 0x10>;
};
sram: sram@c8000000 {
- compatible = "amlogic,meson-gxbb-sram", "mmio-sram";
+ compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
reg = <0x0 0xc8000000 0x0 0x14000>;
#address-cells = <1>;
ranges = <0 0x0 0xc8000000 0x14000>;
cpu_scp_lpri: scp-shmem@0 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
+ compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-shmem@200 {
- compatible = "amlogic,meson-gxbb-scp-shmem";
+ compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
reg = <0x13400 0x400>;
};
};
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+ clkc_AO: clock-controller@040 {
+ compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc";
+ reg = <0x0 0x00040 0x0 0x4>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
uart_AO: serial@4c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x004c0 0x0 0x14>;
status = "disabled";
};
+ i2c_AO: i2c@500 {
+ compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x500 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pwm_AO_ab: pwm@550 {
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
reg = <0x0 0x00550 0x0 0x10>;
};
ir: ir@580 {
- compatible = "amlogic,meson-gxbb-ir";
+ compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
reg = <0x0 0x00580 0x0 0x40>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
- rng {
+ hwrng: rng {
compatible = "amlogic,meson-rng";
reg = <0x0 0x0 0x0 0x4>;
};
};
-
hiubus: hiubus@c883c000 {
compatible = "simple-bus";
reg = <0x0 0xc883c000 0x0 0x2000>;
0x0 0xc8834540 0x0 0x4>;
interrupts = <0 8 1>;
interrupt-names = "macirq";
- phy-mode = "rgmii";
status = "disabled";
};
cvbs_vdac_port: port@0 {
reg = <0>;
};
+
+ /* HDMI-TX output port */
+ hdmi_tx_port: port@1 {
+ reg = <1>;
+
+ hdmi_tx_out: endpoint {
+ remote-endpoint = <&hdmi_tx_in>;
+ };
+ };
+ };
+
+ hdmi_tx: hdmi-tx@c883a000 {
+ compatible = "amlogic,meson-gx-dw-hdmi";
+ reg = <0x0 0xc883a000 0x0 0x1c>;
+ interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ /* VPU VENC Input */
+ hdmi_tx_venc_port: port@0 {
+ reg = <0>;
+
+ hdmi_tx_in: endpoint {
+ remote-endpoint = <&hdmi_tx_out>;
+ };
+ };
+
+ /* TMDS Output */
+ hdmi_tx_tmds_port: port@1 {
+ reg = <1>;
+ };
};
};
};
};
};
- &cbus {
- spifc: spi@8c80 {
- compatible = "amlogic,meson-gxbb-spifc";
- reg = <0x0 0x08c80 0x0 0x80>;
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&clkc CLKID_SPI>;
- status = "disabled";
- };
- };
-
ðmac {
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_aobus 0 0 14>;
};
uart_ao_a_pins: uart_ao_a {
function = "pwm_ao_b";
};
};
- };
- clkc_AO: clock-controller@040 {
- compatible = "amlogic,gxbb-aoclkc";
- reg = <0x0 0x00040 0x0 0x4>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
+ i2s_am_clk_pins: i2s_am_clk {
+ mux {
+ groups = "i2s_am_clk";
+ function = "i2s_out_ao";
+ };
+ };
- pwm_ab_AO: pwm@550 {
- compatible = "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x0550 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
+ i2s_out_ao_clk_pins: i2s_out_ao_clk {
+ mux {
+ groups = "i2s_out_ao_clk";
+ function = "i2s_out_ao";
+ };
+ };
- i2c_AO: i2c@500 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x500 0x0 0x20>;
- interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_AO_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ i2s_out_lr_clk_pins: i2s_out_lr_clk {
+ mux {
+ groups = "i2s_out_lr_clk";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
+ mux {
+ groups = "i2s_out_ch01_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+ mux {
+ groups = "i2s_out_ch23_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+ mux {
+ groups = "i2s_out_ch45_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ spdif_out_ao_6_pins: spdif_out_ao_6 {
+ mux {
+ groups = "spdif_out_ao_6";
+ function = "spdif_out_ao";
+ };
+ };
+
+ spdif_out_ao_13_pins: spdif_out_ao_13 {
+ mux {
+ groups = "spdif_out_ao_13";
+ function = "spdif_out_ao";
+ };
+ };
};
};
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
+ gpio-ranges = <&pinctrl_periphs 0 14 120>;
};
emmc_pins: emmc {
function = "hdmi_i2c";
};
};
+
+ i2sout_ch23_y_pins: i2sout_ch23_y {
+ mux {
+ groups = "i2sout_ch23_y";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch45_y_pins: i2sout_ch45_y {
+ mux {
+ groups = "i2sout_ch45_y";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch67_y_pins: i2sout_ch67_y {
+ mux {
+ groups = "i2sout_ch67_y";
+ function = "i2s_out";
+ };
+ };
+
+ spdif_out_y_pins: spdif_out_y {
+ mux {
+ groups = "spdif_out_y";
+ function = "spdif_out";
+ };
+ };
};
};
};
};
+ &apb {
+ mali: gpu@c0000 {
+ compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+ reg = <0x0 0xc0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gp", "gpmmu", "pp", "pmu",
+ "pp0", "ppmmu0", "pp1", "ppmmu1",
+ "pp2", "ppmmu2";
+ clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+ clock-names = "bus", "core";
+
+ /*
+ * Mali clocking is provided by two identical clock paths
+ * MALI_0 and MALI_1 muxed to a single clock by a glitch
+ * free mux to safely change frequency while running.
+ */
+ assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+ <&clkc CLKID_MALI_0>,
+ <&clkc CLKID_MALI>; /* Glitch free mux */
+ assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+ <0>, /* Do Nothing */
+ <&clkc CLKID_MALI_0>;
+ assigned-clock-rates = <0>, /* Do Nothing */
+ <666666666>,
+ <0>; /* Do Nothing */
+ };
+ };
+
&i2c_A {
clocks = <&clkc CLKID_I2C>;
};
+ &i2c_AO {
+ clocks = <&clkc CLKID_AO_I2C>;
+ };
+
&i2c_B {
clocks = <&clkc CLKID_I2C>;
};
clock-names = "core", "clkin0", "clkin1";
};
+ &spifc {
+ clocks = <&clkc CLKID_SPI>;
+ };
+
&vpu {
compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
};
+&hwrng {
+ clocks = <&clkc CLKID_RNG0>;
+ clock-names = "core";
+};
++
+ &hdmi_tx {
+ compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+ resets = <&reset RESET_HDMITX_CAPB3>,
+ <&reset RESET_HDMI_SYSTEM_RESET>,
+ <&reset RESET_HDMI_TX>;
+ reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+ clocks = <&clkc CLKID_HDMI_PCLK>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_GCLK_VENCI_INT0>;
+ clock-names = "isfr", "iahb", "venci";
+ };
pcie0: pcie@20020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x20020000 0 0x1000>;
+ dma-coherent;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
pcie4: pcie@50020000 {
compatible = "brcm,iproc-pcie";
reg = <0 0x50020000 0 0x1000>;
+ dma-coherent;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
pcie8: pcie@60c00000 {
compatible = "brcm,iproc-pcie-paxc";
reg = <0 0x60c00000 0 0x1000>;
+ dma-coherent;
linux,pci-domain = <8>;
bus-range = <0x0 0x1>;
<0x61030000 0x100>;
reg-names = "amac_base", "idm_base", "nicpm_base";
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
phy-handle = <&gphy0>;
phy-mode = "rgmii";
status = "disabled";
reg = <0x612c0000 0x445>; /* PDC FS0 regs */
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
+ dma-coherent;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
+ crypto0: crypto@612d0000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x612d0000 0x900>;
+ mboxes = <&pdc0 0>;
+ };
+
pdc1: iproc-pdc1@612e0000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x612e0000 0x445>; /* PDC FS1 regs */
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
+ dma-coherent;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
+ crypto1: crypto@612f0000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x612f0000 0x900>;
+ mboxes = <&pdc1 0>;
+ };
+
pdc2: iproc-pdc2@61300000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61300000 0x445>; /* PDC FS2 regs */
interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
+ dma-coherent;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
+ crypto2: crypto@61310000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x61310000 0x900>;
+ mboxes = <&pdc2 0>;
+ };
+
pdc3: iproc-pdc3@61320000 {
compatible = "brcm,iproc-pdc-mbox";
reg = <0x61320000 0x445>; /* PDC FS3 regs */
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
+ dma-coherent;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
};
+ crypto3: crypto@61330000 {
+ compatible = "brcm,spum-crypto";
+ reg = <0x61330000 0x900>;
+ mboxes = <&pdc3 0>;
+ };
+
dma0: dma@61360000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x61360000 0x1000>;
sata: ahci@663f2000 {
compatible = "brcm,iproc-ahci", "generic-ahci";
reg = <0x663f2000 0x1000>;
+ dma-coherent;
reg-names = "ahci";
interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66420000 0x100>;
interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
compatible = "brcm,sdhci-iproc-cygnus";
reg = <0x66430000 0x100>;
interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
bus-width = <8>;
clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>;
status = "disabled";
/dts-v1/;
+ #include <dt-bindings/gpio/gpio.h>
#include "armada-372x.dtsi"
/ {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
};
+
+ exp_usb3_vbus: usb3-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb3-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ usb3_phy: usb3-phy {
+ compatible = "usb-nop-xceiv";
+ vcc-supply = <&exp_usb3_vbus>;
+ };
};
&i2c0 {
status = "okay";
+
+ gpio_exp: pca9555@22 {
+ compatible = "nxp,pca9555";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ reg = <0x22>;
+ /*
+ * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT
+ * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE
+ * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN
+ * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN
+ * IO0_4: PWR_EN_SD
+ * IO0_5: PWR_EN_EMMC
+ * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL
+ * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS
+ */
+ };
+
+ rtc@68 {
+ /* PT7C4337A from pericom fully compatible with the ds1337 */
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ };
};
/* CON3 */
status = "okay";
};
+ &sdhci0 {
+ non-removable;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+ };
+
/* CON31 */
&usb3 {
status = "okay";
+ usb-phy = <&usb3_phy>;
};
/* CON17 (PCIe) / CON12 (mini-PCIe) */
status = "okay";
};
+/* CON27 */
+&usb2 {
+ status = "okay";
+};
+
+
&mdio {
status = "okay";
phy0: ethernet-phy@0 {
i2c0: i2c@11000 {
compatible = "marvell,armada-3700-i2c";
reg = <0x11000 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&nb_periph_clk 10>;
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
mrvl,i2c-fast-mode;
i2c1: i2c@11080 {
compatible = "marvell,armada-3700-i2c";
reg = <0x11080 0x24>;
+ #address-cells = <1>;
+ #size-cells = <0>;
clocks = <&nb_periph_clk 9>;
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
mrvl,i2c-fast-mode;
compatible = "marvell,armada3700-xhci",
"generic-xhci";
reg = <0x58000 0x4000>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sb_periph_clk 12>;
status = "disabled";
};
+ usb2: usb@5e000 {
+ compatible = "marvell,armada-3700-ehci";
+ reg = <0x5e000 0x2000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
xor@60900 {
compatible = "marvell,armada-3700-xor";
reg = <0x60900 0x100
};
};
+ sdhci0: sdhci@d8000 {
+ compatible = "marvell,armada-3700-sdhci",
+ "marvell,sdhci-xenon";
+ reg = <0xd8000 0x300
+ 0x17808 0x4>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nb_periph_clk 0>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
sata: sata@e0000 {
compatible = "marvell,armada-3700-ahci";
reg = <0xe0000 0x2000>;
};
+ ap_sdhci0: sdhci@6e0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0x6e0000 0x300>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "core";
+ clocks = <&ap_syscon 4>;
+ dma-coherent;
+ marvell,xenon-phy-slow-mode;
+ status = "disabled";
+ };
+
ap_syscon: system-controller@6f4000 {
compatible = "marvell,ap806-system-controller",
"syscon";
#clock-cells = <1>;
clock-output-names = "ap-cpu-cluster-0",
"ap-cpu-cluster-1",
- "ap-fixed", "ap-mss";
+ "ap-fixed", "ap-mss",
+ "ap-emmc";
reg = <0x6f4000 0x1000>;
};
};
/* CLKID_FCLK_DIV4 */
#define CLKID_FCLK_DIV5 7
#define CLKID_FCLK_DIV7 8
- #define CLKID_GP0_PLL 9
+ /* CLKID_GP0_PLL */
#define CLKID_MPEG_SEL 10
#define CLKID_MPEG_DIV 11
/* CLKID_CLK81 */
/* CLKID_I2C */
/* #define CLKID_SAR_ADC */
#define CLKID_SMART_CARD 24
-#define CLKID_RNG0 25
+/* CLKID_RNG0 */
#define CLKID_UART0 26
#define CLKID_SDHC 27
#define CLKID_STREAM 28
#define CLKID_I2S_SPDIF 35
/* CLKID_ETH */
#define CLKID_DEMUX 37
- #define CLKID_AIU_GLUE 38
+ /* CLKID_AIU_GLUE */
#define CLKID_IEC958 39
- #define CLKID_I2S_OUT 40
+ /* CLKID_I2S_OUT */
#define CLKID_AMCLK 41
#define CLKID_AIFIFO2 42
#define CLKID_MIXER 43
- #define CLKID_MIXER_IFACE 44
+ /* CLKID_MIXER_IFACE */
#define CLKID_ADC 45
#define CLKID_BLKMV 46
- #define CLKID_AIU 47
+ /* CLKID_AIU */
#define CLKID_UART1 48
#define CLKID_G2D 49
/* CLKID_USB0 */
/* CLKID_GCLK_VENCI_INT0 */
#define CLKID_GCLK_VENCI_INT 78
#define CLKID_DAC_CLK 79
- #define CLKID_AOCLK_GATE 80
+ /* CLKID_AOCLK_GATE */
#define CLKID_IEC958_GATE 81
#define CLKID_ENC480P 82
#define CLKID_RNG1 83
/* CLKID_SAR_ADC_CLK */
/* CLKID_SAR_ADC_SEL */
#define CLKID_SAR_ADC_DIV 99
+ /* CLKID_MALI_0_SEL */
+ #define CLKID_MALI_0_DIV 101
+ /* CLKID_MALI_0 */
+ /* CLKID_MALI_1_SEL */
+ #define CLKID_MALI_1_DIV 104
+ /* CLKID_MALI_1 */
+ /* CLKID_MALI */
- #define NR_CLKS 100
+ #define NR_CLKS 107
/* include the CLKIDs that have been made part of the stable DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>
#define CLKID_FCLK_DIV2 4
#define CLKID_FCLK_DIV3 5
#define CLKID_FCLK_DIV4 6
+ #define CLKID_GP0_PLL 9
#define CLKID_CLK81 12
#define CLKID_MPLL2 15
-#define CLKID_SPI 34
#define CLKID_I2C 22
#define CLKID_SAR_ADC 23
+#define CLKID_RNG0 25
+#define CLKID_SPI 34
#define CLKID_ETH 36
+ #define CLKID_AIU_GLUE 38
+ #define CLKID_I2S_OUT 40
+ #define CLKID_MIXER_IFACE 44
+ #define CLKID_AIU 47
#define CLKID_USB0 50
#define CLKID_USB1 51
#define CLKID_USB 55
#define CLKID_USB0_DDR_BRIDGE 65
#define CLKID_SANA 69
#define CLKID_GCLK_VENCI_INT0 77
+ #define CLKID_AOCLK_GATE 80
#define CLKID_AO_I2C 93
#define CLKID_SD_EMMC_A 94
#define CLKID_SD_EMMC_B 95
#define CLKID_SD_EMMC_C 96
#define CLKID_SAR_ADC_CLK 97
#define CLKID_SAR_ADC_SEL 98
+ #define CLKID_MALI_0_SEL 100
+ #define CLKID_MALI_0 102
+ #define CLKID_MALI_1_SEL 103
+ #define CLKID_MALI_1 105
+ #define CLKID_MALI 106
#endif /* __GXBB_CLKC_H */
projects / linux.git / commitdiff