* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: (35 commits)
[CPUFREQ] Prevent p4-clockmod from auto-binding to the ondemand governor.
[CPUFREQ] Make cpufreq-nforce2 less obnoxious
[CPUFREQ] p4-clockmod reports wrong frequency.
[CPUFREQ] powernow-k8: Use a common exit path.
[CPUFREQ] Change link order of x86 cpufreq modules
[CPUFREQ] conservative: remove 10x from def_sampling_rate
[CPUFREQ] conservative: fixup governor to function more like ondemand logic
[CPUFREQ] conservative: fix dbs_cpufreq_notifier so freq is not locked
[CPUFREQ] conservative: amend author's email address
[CPUFREQ] Use swap() in longhaul.c
[CPUFREQ] checkpatch cleanups for acpi-cpufreq
[CPUFREQ] powernow-k8: Only print error message once, not per core.
[CPUFREQ] ondemand/conservative: sanitize sampling_rate restrictions
[CPUFREQ] ondemand/conservative: deprecate sampling_rate{min,max}
[CPUFREQ] powernow-k8: Always compile powernow-k8 driver with ACPI support
[CPUFREQ] Introduce /sys/devices/system/cpu/cpu*/cpufreq/cpuinfo_transition_latency
[CPUFREQ] checkpatch cleanups for powernow-k8
[CPUFREQ] checkpatch cleanups for ondemand governor.
[CPUFREQ] checkpatch cleanups for powernow-k7
[CPUFREQ] checkpatch cleanups for speedstep related drivers.
...
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/cpumask.h>
+ #include <linux/timex.h>
#include <asm/processor.h>
#include <asm/msr.h>
- #include <asm/timex.h>
+ #include <asm/timer.h>
#include "speedstep-lib.h"
#define PFX "p4-clockmod: "
- #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "p4-clockmod", msg)
+ #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, \
+ "p4-clockmod", msg)
/*
* Duty Cycle (3bits), note DC_DISABLE is not specified in
{
u32 l, h;
- if (!cpu_online(cpu) || (newstate > DC_DISABLE) || (newstate == DC_RESV))
+ if (!cpu_online(cpu) ||
+ (newstate > DC_DISABLE) || (newstate == DC_RESV))
return -EINVAL;
rdmsr_on_cpu(cpu, MSR_IA32_THERM_STATUS, &l, &h);
if (l & 0x01)
dprintk("CPU#%d currently thermal throttled\n", cpu);
- if (has_N44_O17_errata[cpu] && (newstate == DC_25PT || newstate == DC_DFLT))
+ if (has_N44_O17_errata[cpu] &&
+ (newstate == DC_25PT || newstate == DC_DFLT))
newstate = DC_38PT;
rdmsr_on_cpu(cpu, MSR_IA32_THERM_CONTROL, &l, &h);
struct cpufreq_freqs freqs;
int i;
- if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0], target_freq, relation, &newstate))
+ if (cpufreq_frequency_table_target(policy, &p4clockmod_table[0],
+ target_freq, relation, &newstate))
return -EINVAL;
freqs.old = cpufreq_p4_get(policy->cpu);
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
}
- /* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
+ /* run on each logical CPU,
+ * see section 13.15.3 of IA32 Intel Architecture Software
* Developer's Manual, Volume 3
*/
for_each_cpu(i, policy->cpus)
{
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
- printk(KERN_WARNING PFX "Warning: EST-capable CPU detected. "
- "The acpi-cpufreq module offers voltage scaling"
- " in addition of frequency scaling. You should use "
- "that instead of p4-clockmod, if possible.\n");
+ printk(KERN_WARNING PFX "Warning: EST-capable CPU "
+ "detected. The acpi-cpufreq module offers "
+ "voltage scaling in addition of frequency "
+ "scaling. You should use that instead of "
+ "p4-clockmod, if possible.\n");
switch (c->x86_model) {
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
case 0x16: /* Celeron Core */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PCORE);
+ return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
case 0x0D: /* Pentium M (Dothan) */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
/* fall through */
case 0x09: /* Pentium M (Banias) */
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_PM);
+ return speedstep_get_frequency(SPEEDSTEP_CPU_PM);
}
}
if (c->x86 != 0xF) {
if (!cpu_has(c, X86_FEATURE_EST))
- printk(KERN_WARNING PFX "Unknown p4-clockmod-capable CPU. "
+ printk(KERN_WARNING PFX "Unknown CPU. "
+ "Please send an e-mail to "
return 0;
}
* throttling is active or not. */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
- if (speedstep_detect_processor() == SPEEDSTEP_PROCESSOR_P4M) {
+ if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
"The speedstep-ich or acpi cpufreq modules offer "
"voltage scaling in addition of frequency scaling. "
"You should use either one instead of p4-clockmod, "
"if possible.\n");
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4M);
+ return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
}
- return speedstep_get_processor_frequency(SPEEDSTEP_PROCESSOR_P4D);
+ return speedstep_get_frequency(SPEEDSTEP_CPU_P4D);
}
dprintk("has errata -- disabling low frequencies\n");
}
+ if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4D &&
+ c->x86_model < 2) {
+ /* switch to maximum frequency and measure result */
+ cpufreq_p4_setdc(policy->cpu, DC_DISABLE);
+ recalibrate_cpu_khz();
+ }
/* get max frequency */
stock_freq = cpufreq_p4_get_frequency(c);
if (!stock_freq)
return -EINVAL;
/* table init */
- for (i=1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
- if ((i<2) && (has_N44_O17_errata[policy->cpu]))
+ for (i = 1; (p4clockmod_table[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if ((i < 2) && (has_N44_O17_errata[policy->cpu]))
p4clockmod_table[i].frequency = CPUFREQ_ENTRY_INVALID;
else
p4clockmod_table[i].frequency = (stock_freq * i)/8;
cpufreq_frequency_table_get_attr(p4clockmod_table, policy->cpu);
/* cpuinfo and default policy values */
- policy->cpuinfo.transition_latency = 1000000; /* assumed */
+
+ /* the transition latency is set to be 1 higher than the maximum
+ * transition latency of the ondemand governor */
+ policy->cpuinfo.transition_latency = 10000001;
policy->cur = stock_freq;
return cpufreq_frequency_table_cpuinfo(policy, &p4clockmod_table[0]);
l = DC_DISABLE;
if (l != DC_DISABLE)
- return (stock_freq * l / 8);
+ return stock_freq * l / 8;
return stock_freq;
}
- static struct freq_attr* p4clockmod_attr[] = {
+ static struct freq_attr *p4clockmod_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
.name = "p4-clockmod",
.owner = THIS_MODULE,
.attr = p4clockmod_attr,
- .hide_interface = 1,
};
ret = cpufreq_register_driver(&p4clockmod_driver);
if (!ret)
- printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
+ printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
+ "Modulation available\n");
- return (ret);
+ return ret;
}
}
- MODULE_DESCRIPTION ("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
- MODULE_LICENSE ("GPL");
+ MODULE_DESCRIPTION("cpufreq driver for Pentium(TM) 4/Xeon(TM)");
+ MODULE_LICENSE("GPL");
late_initcall(cpufreq_p4_init);
module_exit(cpufreq_p4_exit);
* use the TSC value at the transitions to calculate a pretty
* good value for the TSC frequencty.
*/
-static inline int pit_expect_msb(unsigned char val)
+static inline int pit_expect_msb(unsigned char val, u64 *tscp, unsigned long *deltap)
{
- int count = 0;
+ int count;
+ u64 tsc = 0;
for (count = 0; count < 50000; count++) {
/* Ignore LSB */
inb(0x42);
if (inb(0x42) != val)
break;
+ tsc = get_cycles();
}
- return count > 50;
+ *deltap = get_cycles() - tsc;
+ *tscp = tsc;
+
+ /*
+ * We require _some_ success, but the quality control
+ * will be based on the error terms on the TSC values.
+ */
+ return count > 5;
}
/*
- * How many MSB values do we want to see? We aim for a
- * 15ms calibration, which assuming a 2us counter read
- * error should give us roughly 150 ppm precision for
- * the calibration.
+ * How many MSB values do we want to see? We aim for
+ * a maximum error rate of 500ppm (in practice the
+ * real error is much smaller), but refuse to spend
+ * more than 25ms on it.
*/
-#define QUICK_PIT_MS 15
-#define QUICK_PIT_ITERATIONS (QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
+#define MAX_QUICK_PIT_MS 25
+#define MAX_QUICK_PIT_ITERATIONS (MAX_QUICK_PIT_MS * PIT_TICK_RATE / 1000 / 256)
static unsigned long quick_pit_calibrate(void)
{
+ int i;
+ u64 tsc, delta;
+ unsigned long d1, d2;
+
/* Set the Gate high, disable speaker */
outb((inb(0x61) & ~0x02) | 0x01, 0x61);
outb(0xff, 0x42);
outb(0xff, 0x42);
- if (pit_expect_msb(0xff)) {
- int i;
- u64 t1, t2, delta;
- unsigned char expect = 0xfe;
-
- t1 = get_cycles();
- for (i = 0; i < QUICK_PIT_ITERATIONS; i++, expect--) {
- if (!pit_expect_msb(expect))
- goto failed;
+ /*
+ * The PIT starts counting at the next edge, so we
+ * need to delay for a microsecond. The easiest way
+ * to do that is to just read back the 16-bit counter
+ * once from the PIT.
+ */
+ inb(0x42);
+ inb(0x42);
+
+ if (pit_expect_msb(0xff, &tsc, &d1)) {
+ for (i = 1; i <= MAX_QUICK_PIT_ITERATIONS; i++) {
+ if (!pit_expect_msb(0xff-i, &delta, &d2))
+ break;
+
+ /*
+ * Iterate until the error is less than 500 ppm
+ */
+ delta -= tsc;
+ if (d1+d2 < delta >> 11)
+ goto success;
}
- t2 = get_cycles();
-
- /*
- * Make sure we can rely on the second TSC timestamp:
- */
- if (!pit_expect_msb(expect))
- goto failed;
-
- /*
- * Ok, if we get here, then we've seen the
- * MSB of the PIT decrement QUICK_PIT_ITERATIONS
- * times, and each MSB had many hits, so we never
- * had any sudden jumps.
- *
- * As a result, we can depend on there not being
- * any odd delays anywhere, and the TSC reads are
- * reliable.
- *
- * kHz = ticks / time-in-seconds / 1000;
- * kHz = (t2 - t1) / (QPI * 256 / PIT_TICK_RATE) / 1000
- * kHz = ((t2 - t1) * PIT_TICK_RATE) / (QPI * 256 * 1000)
- */
- delta = (t2 - t1)*PIT_TICK_RATE;
- do_div(delta, QUICK_PIT_ITERATIONS*256*1000);
- printk("Fast TSC calibration using PIT\n");
- return delta;
}
-failed:
+ printk("Fast TSC calibration failed\n");
return 0;
+
+success:
+ /*
+ * Ok, if we get here, then we've seen the
+ * MSB of the PIT decrement 'i' times, and the
+ * error has shrunk to less than 500 ppm.
+ *
+ * As a result, we can depend on there not being
+ * any odd delays anywhere, and the TSC reads are
+ * reliable (within the error). We also adjust the
+ * delta to the middle of the error bars, just
+ * because it looks nicer.
+ *
+ * kHz = ticks / time-in-seconds / 1000;
+ * kHz = (t2 - t1) / (I * 256 / PIT_TICK_RATE) / 1000
+ * kHz = ((t2 - t1) * PIT_TICK_RATE) / (I * 256 * 1000)
+ */
+ delta += (long)(d2 - d1)/2;
+ delta *= PIT_TICK_RATE;
+ do_div(delta, i*256*1000);
+ printk("Fast TSC calibration using PIT\n");
+ return delta;
}
/**
return tsc_pit_min;
}
- #ifdef CONFIG_X86_32
- /* Only called from the Powernow K7 cpu freq driver */
int recalibrate_cpu_khz(void)
{
#ifndef CONFIG_SMP
EXPORT_SYMBOL(recalibrate_cpu_khz);
- #endif /* CONFIG_X86_32 */
/* Accelerators for sched_clock()
* convert from cycles(64bits) => nanoseconds (64bits)
/* internal prototypes */
- static int __cpufreq_governor(struct cpufreq_policy *policy, unsigned int event);
+ static int __cpufreq_governor(struct cpufreq_policy *policy,
+ unsigned int event);
static unsigned int __cpufreq_get(unsigned int cpu);
static void handle_update(struct work_struct *work);
pure_initcall(init_cpufreq_transition_notifier_list);
static LIST_HEAD(cpufreq_governor_list);
- static DEFINE_MUTEX (cpufreq_governor_mutex);
+ static DEFINE_MUTEX(cpufreq_governor_mutex);
struct cpufreq_policy *cpufreq_cpu_get(unsigned int cpu)
{
struct cpufreq_governor *t;
list_for_each_entry(t, &cpufreq_governor_list, governor_list)
- if (!strnicmp(str_governor,t->name,CPUFREQ_NAME_LEN))
+ if (!strnicmp(str_governor, t->name, CPUFREQ_NAME_LEN))
return t;
return NULL;
mutex_unlock(&cpufreq_governor_mutex);
}
- out:
+ out:
return err;
}
- /* drivers/base/cpu.c */
- extern struct sysdev_class cpu_sysdev_class;
-
-
/**
* cpufreq_per_cpu_attr_read() / show_##file_name() -
* print out cpufreq information
static ssize_t show_##file_name \
(struct cpufreq_policy *policy, char *buf) \
{ \
- return sprintf (buf, "%u\n", policy->object); \
+ return sprintf(buf, "%u\n", policy->object); \
}
show_one(cpuinfo_min_freq, cpuinfo.min_freq);
show_one(cpuinfo_max_freq, cpuinfo.max_freq);
+ show_one(cpuinfo_transition_latency, cpuinfo.transition_latency);
show_one(scaling_min_freq, min);
show_one(scaling_max_freq, max);
show_one(scaling_cur_freq, cur);
if (ret) \
return -EINVAL; \
\
- ret = sscanf (buf, "%u", &new_policy.object); \
+ ret = sscanf(buf, "%u", &new_policy.object); \
if (ret != 1) \
return -EINVAL; \
\
return ret ? ret : count; \
}
- store_one(scaling_min_freq,min);
- store_one(scaling_max_freq,max);
+ store_one(scaling_min_freq, min);
+ store_one(scaling_max_freq, max);
/**
* show_cpuinfo_cur_freq - current CPU frequency as detected by hardware
*/
static ssize_t show_scaling_governor(struct cpufreq_policy *policy, char *buf)
{
- if(policy->policy == CPUFREQ_POLICY_POWERSAVE)
+ if (policy->policy == CPUFREQ_POLICY_POWERSAVE)
return sprintf(buf, "powersave\n");
else if (policy->policy == CPUFREQ_POLICY_PERFORMANCE)
return sprintf(buf, "performance\n");
else if (policy->governor)
- return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n", policy->governor->name);
+ return scnprintf(buf, CPUFREQ_NAME_LEN, "%s\n",
+ policy->governor->name);
return -EINVAL;
}
if (ret)
return ret;
- ret = sscanf (buf, "%15s", str_governor);
+ ret = sscanf(buf, "%15s", str_governor);
if (ret != 1)
return -EINVAL;
}
list_for_each_entry(t, &cpufreq_governor_list, governor_list) {
- if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char)) - (CPUFREQ_NAME_LEN + 2)))
+ if (i >= (ssize_t) ((PAGE_SIZE / sizeof(char))
+ - (CPUFREQ_NAME_LEN + 2)))
goto out;
i += scnprintf(&buf[i], CPUFREQ_NAME_LEN, "%s ", t->name);
}
i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), " ");
i += scnprintf(&buf[i], (PAGE_SIZE - i - 2), "%u", cpu);
if (i >= (PAGE_SIZE - 5))
- break;
+ break;
}
i += sprintf(&buf[i], "\n");
return i;
define_one_ro0400(cpuinfo_cur_freq);
define_one_ro(cpuinfo_min_freq);
define_one_ro(cpuinfo_max_freq);
+ define_one_ro(cpuinfo_transition_latency);
define_one_ro(scaling_available_governors);
define_one_ro(scaling_driver);
define_one_ro(scaling_cur_freq);
static struct attribute *default_attrs[] = {
&cpuinfo_min_freq.attr,
&cpuinfo_max_freq.attr,
+ &cpuinfo_transition_latency.attr,
&scaling_min_freq.attr,
&scaling_max_freq.attr,
&affected_cpus.attr,
NULL
};
- #define to_policy(k) container_of(k,struct cpufreq_policy,kobj)
- #define to_attr(a) container_of(a,struct freq_attr,attr)
+ #define to_policy(k) container_of(k, struct cpufreq_policy, kobj)
+ #define to_attr(a) container_of(a, struct freq_attr, attr)
- static ssize_t show(struct kobject *kobj, struct attribute *attr ,char *buf)
+ static ssize_t show(struct kobject *kobj, struct attribute *attr, char *buf)
{
struct cpufreq_policy *policy = to_policy(kobj);
struct freq_attr *fattr = to_attr(attr);
.release = cpufreq_sysfs_release,
};
-static struct kobj_type ktype_empty_cpufreq = {
- .sysfs_ops = &sysfs_ops,
- .release = cpufreq_sysfs_release,
-};
-
/**
* cpufreq_add_dev - add a CPU device
if (cpu == j)
continue;
- /* check for existing affected CPUs. They may not be aware
- * of it due to CPU Hotplug.
+ /* Check for existing affected CPUs.
+ * They may not be aware of it due to CPU Hotplug.
*/
- managed_policy = cpufreq_cpu_get(j); // FIXME: Where is this released? What about error paths?
+ managed_policy = cpufreq_cpu_get(j); /* FIXME: Where is this released? What about error paths? */
if (unlikely(managed_policy)) {
/* Set proper policy_cpu */
memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
/* prepare interface data */
- if (!cpufreq_driver->hide_interface) {
- ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
- &sys_dev->kobj, "cpufreq");
+ ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
+ "cpufreq");
+ if (ret)
+ goto err_out_driver_exit;
+
+ /* set up files for this cpu device */
+ drv_attr = cpufreq_driver->attr;
+ while ((drv_attr) && (*drv_attr)) {
+ ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
if (ret)
goto err_out_driver_exit;
-
- /* set up files for this cpu device */
- drv_attr = cpufreq_driver->attr;
- while ((drv_attr) && (*drv_attr)) {
- ret = sysfs_create_file(&policy->kobj,
- &((*drv_attr)->attr));
- if (ret)
- goto err_out_driver_exit;
- drv_attr++;
- }
- if (cpufreq_driver->get) {
- ret = sysfs_create_file(&policy->kobj,
- &cpuinfo_cur_freq.attr);
- if (ret)
- goto err_out_driver_exit;
- }
- if (cpufreq_driver->target) {
- ret = sysfs_create_file(&policy->kobj,
- &scaling_cur_freq.attr);
- if (ret)
- goto err_out_driver_exit;
- }
- } else {
- ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq,
- &sys_dev->kobj, "cpufreq");
+ drv_attr++;
+ }
+ if (cpufreq_driver->get) {
+ ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+ if (ret)
+ goto err_out_driver_exit;
+ }
+ if (cpufreq_driver->target) {
+ ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
if (ret)
goto err_out_driver_exit;
}
* @old_freq: CPU frequency the kernel thinks the CPU runs at
* @new_freq: CPU frequency the CPU actually runs at
*
- * We adjust to current frequency first, and need to clean up later. So either call
- * to cpufreq_update_policy() or schedule handle_update()).
+ * We adjust to current frequency first, and need to clean up later.
+ * So either call to cpufreq_update_policy() or schedule handle_update()).
*/
static void cpufreq_out_of_sync(unsigned int cpu, unsigned int old_freq,
unsigned int new_freq)
/**
* cpufreq_get_policy - get the current cpufreq_policy
- * @policy: struct cpufreq_policy into which the current cpufreq_policy is written
+ * @policy: struct cpufreq_policy into which the current cpufreq_policy
+ * is written
*
* Reads the current cpufreq policy.
*/
projects / linux.git / commitdiff