&l4_wkup { /* 0x44c00000 */
- compatible = "ti,am33xx-l4-wkup", "simple-bus";
+ compatible = "ti,am33xx-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkup>;
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x44c00000 0x800>,
<0x44c00800 0x800>,
<0x44c01000 0x400>,
<0x00200000 0x44e00000 0x100000>; /* segment 2 */
segment@0 { /* 0x44c00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@100000 { /* 0x44d00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x0 0x4>;
reg-names = "rev";
+ clocks = <&l4_wkup_aon_clkctrl AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x0 0x4000>;
- status = "disabled";
- };
+ ranges = <0x00000000 0x00000000 0x4000>,
+ <0x00080000 0x00080000 0x2000>;
- target-module@80000 { /* 0x44d80000, ap 6 10.0 */
- compatible = "ti,sysc";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x80000 0x2000>;
+ wkup_m3: cpu@0 {
+ compatible = "ti,am3352-wkup-m3";
+ reg = <0x00000000 0x4000>,
+ <0x00080000 0x2000>;
+ reg-names = "umem", "dmem";
+ resets = <&prm_wkup 3>;
+ reset-names = "rstctrl";
+ ti,pm-firmware = "am335x-pm-firmware.elf";
+ };
};
};
segment@200000 { /* 0x44e00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00200000 0x002000>, /* ap 8 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x10000 0x4>;
reg-names = "rev";
+ clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_CONTROL_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00010000 0x00010000>,
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+ power-domains = <&prm_rtc>;
clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
};
&l4_fast { /* 0x4a000000 */
- compatible = "ti,am33xx-l4-fast", "simple-bus";
+ compatible = "ti,am33xx-l4-fast", "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l4hs_clkctrl AM3_L4HS_L4_HS_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4a000000 0x800>,
<0x4a000800 0x800>,
<0x4a001000 0x400>;
ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */
segment@0 { /* 0x4a000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
&l4_per { /* 0x48000000 */
- compatible = "ti,am33xx-l4-per", "simple-bus";
+ compatible = "ti,am33xx-l4-per", "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48000000 0x800>,
<0x48000800 0x800>,
<0x48001000 0x400>,
<0x46400000 0x46400000 0x400000>; /* l3 data port */
segment@0 { /* 0x48000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@100000 { /* 0x48100000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 42 */
};
segment@200000 { /* 0x48200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0x00000000 0x00200000 0x010000>;
+
+ target-module@0 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl AM3_MPU_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x10000>;
+
+ mpu@0 {
+ compatible = "ti,omap3-mpu";
+ pm-sram = <&pm_sram_code
+ &pm_sram_data>;
+ };
+ };
};
segment@300000 { /* 0x48300000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00300000 0x001000>, /* ap 66 */
status = "disabled";
};
+ eqep0: counter@180 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x180 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "sysclkout";
+ interrupts = <79>;
+ status = "disabled";
+ };
+
ehrpwm0: pwm@200 {
compatible = "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
status = "disabled";
};
+ eqep1: counter@180 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x180 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "sysclkout";
+ interrupts = <88>;
+ status = "disabled";
+ };
+
ehrpwm1: pwm@200 {
compatible = "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
status = "disabled";
};
+ eqep2: counter@180 {
+ compatible = "ti,am3352-eqep";
+ reg = <0x180 0x80>;
+ clocks = <&l4ls_gclk>;
+ clock-names = "sysclkout";
+ interrupts = <89>;
+ status = "disabled";
+ };
+
ehrpwm2: pwm@200 {
compatible = "ti,am3352-ehrpwm",
"ti,am33xx-ehrpwm";
&l4_wkup { /* 0x44c00000 */
- compatible = "ti,am4-l4-wkup", "simple-bus";
+ compatible = "ti,am4-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkup>;
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x44c00000 0x800>,
<0x44c00800 0x800>,
<0x44c01000 0x400>,
<0x00200000 0x44e00000 0x100000>; /* segment 2 */
segment@0 { /* 0x44c00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@100000 { /* 0x44d00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */
<0x000f0000 0x001f0000 0x010000>; /* ap 8 */
target-module@0 { /* 0x44d00000, ap 4 28.0 */
- compatible = "ti,sysc";
- status = "disabled";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x0 0x4000>;
- };
-
- target-module@80000 { /* 0x44d80000, ap 6 10.0 */
- compatible = "ti,sysc";
- status = "disabled";
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x0 0x4>;
+ reg-names = "rev";
+ clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
+ clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0x80000 0x2000>;
+ ranges = <0x00000000 0x00000000 0x4000>,
+ <0x00080000 0x00080000 0x2000>;
+
+ wkup_m3: cpu@0 {
+ compatible = "ti,am4372-wkup-m3";
+ reg = <0x00000000 0x4000>,
+ <0x00080000 0x2000>;
+ reg-names = "umem", "dmem";
+ resets = <&prm_wkup 3>;
+ reset-names = "rstctrl";
+ ti,pm-firmware = "am335x-pm-firmware.elf";
+ };
};
target-module@f0000 { /* 0x44df0000, ap 8 58.0 */
};
segment@200000 { /* 0x44e00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00200000 0x001000>, /* ap 9 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x10000 0x4>;
reg-names = "rev";
+ clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_CONTROL_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x10000 0x10000>;
<SYSC_IDLE_SMART>,
<SYSC_IDLE_SMART_WKUP>;
/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+ power-domains = <&prm_rtc>;
clocks = <&l4_rtc_clkctrl AM4_L4_RTC_RTC_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
};
&l4_fast { /* 0x4a000000 */
- compatible = "ti,am4-l4-fast", "simple-bus";
+ compatible = "ti,am4-l4-fast", "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l3_clkctrl AM4_L3_L4_HS_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4a000000 0x800>,
<0x4a000800 0x800>,
<0x4a001000 0x400>;
ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */
segment@0 { /* 0x4a000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
ranges = <0x0 0x100000 0x8000>;
mac_sw: switch@0 {
- compatible = "ti,am4372-cpsw","ti,cpsw-switch";
+ compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch";
reg = <0x0 0x4000>;
ranges = <0 0 0x4000>;
clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
};
&l4_per { /* 0x48000000 */
- compatible = "ti,am4-l4-per", "simple-bus";
+ compatible = "ti,am4-l4-per", "simple-pm-bus";
+ power-domains = <&prm_per>;
+ clocks = <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48000000 0x800>,
<0x48000800 0x800>,
<0x48001000 0x400>,
<0x46400000 0x46400000 0x400000>; /* l3 data port */
segment@0 { /* 0x48000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
};
segment@100000 { /* 0x48100000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 34 */
};
segment@200000 { /* 0x48200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
+ ranges = <0x00000000 0x00200000 0x010000>;
+
+ target-module@0 {
+ compatible = "ti,sysc-omap4-simple", "ti,sysc";
+ power-domains = <&prm_mpu>;
+ clocks = <&mpu_clkctrl AM4_MPU_MPU_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,no-idle;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x10000>;
+
+ mpu@0 {
+ compatible = "ti,omap4-mpu";
+ pm-sram = <&pm_sram_code
+ &pm_sram_data>;
+ };
+ };
};
segment@300000 { /* 0x48300000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00300000 0x001000>, /* ap 56 */
ranges = <0 0 0x20000>;
usb1: usb@10000 {
- compatible = "synopsys,dwc3";
+ compatible = "snps,dwc3";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
ranges = <0 0 0x20000>;
usb2: usb@10000 {
- compatible = "synopsys,dwc3";
+ compatible = "snps,dwc3";
reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
/* OCP2SCP1 */
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
- gpmc: gpmc@50000000 {
- compatible = "ti,am3352-gpmc";
- ti,hwmods = "gpmc";
- reg = <0x50000000 0x37c>; /* device IO registers */
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&edma_xbar 4 0>;
- dma-names = "rxtx";
- gpmc,num-cs = <8>;
- gpmc,num-waitpins = <2>;
- #address-cells = <2>;
+
+ target-module@50000000 {
+ compatible = "ti,sysc-omap2", "ti,sysc";
+ reg = <0x50000000 4>,
+ <0x50000010 4>,
+ <0x50000014 4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
#size-cells = <1>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-controller;
- #gpio-cells = <2>;
- status = "disabled";
+ ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+ <0x00000000 0x00000000 0x40000000>; /* data */
+
+ gpmc: gpmc@50000000 {
+ compatible = "ti,am3352-gpmc";
+ reg = <0x50000000 0x37c>; /* device IO registers */
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 4 0>;
+ dma-names = "rxtx";
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <2>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ status = "disabled";
+ };
};
target-module@56000000 {
};
};
- sham_target: target-module@4b101000 {
+ sham1_target: target-module@4b101000 {
compatible = "ti,sysc-omap3-sham", "ti,sysc";
reg = <0x4b101100 0x4>,
<0x4b101110 0x4>,
#size-cells = <1>;
ranges = <0x0 0x4b101000 0x1000>;
- sham: sham@0 {
+ sham1: sham@0 {
compatible = "ti,omap5-sham";
reg = <0 0x300>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
};
};
+ sham2_target: target-module@42701000 {
+ compatible = "ti,sysc-omap3-sham", "ti,sysc";
+ reg = <0x42701100 0x4>,
+ <0x42701110 0x4>,
+ <0x42701114 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,syss-mask = <1>;
+ /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+ clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x42701000 0x1000>;
+
+ sham2: sham@0 {
+ compatible = "ti,omap5-sham";
+ reg = <0 0x300>;
+ interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&edma_xbar 165 0>;
+ dma-names = "rx";
+ clocks = <&l3_iclk_div>;
+ clock-names = "fck";
+ };
+ };
+
+ iva_hd_target: target-module@5a000000 {
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x5a05a400 0x4>,
+ <0x5a05a410 0x4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ power-domains = <&prm_iva>;
+ resets = <&prm_iva 2>;
+ reset-names = "rstctrl";
+ clocks = <&iva_clkctrl DRA7_IVA_CLKCTRL 0>;
+ clock-names = "fck";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x5a000000 0x5a000000 0x1000000>,
+ <0x5b000000 0x5b000000 0x1000000>;
+
+ iva {
+ compatible = "ti,ivahd";
+ };
+ };
+
opp_supply_mpu: opp-supply@4a003b20 {
compatible = "ti,omap5-opp-supply";
reg = <0x4a003b20 0xc>;
#include "dra7xx-clocks.dtsi"
&prm {
+ prm_mpu: prm@300 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x300 0x100>;
+ #power-domain-cells = <0>;
+ };
+
prm_dsp1: prm@400 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x400 0x100>;
#reset-cells = <1>;
+ #power-domain-cells = <0>;
};
prm_ipu: prm@500 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x500 0x100>;
#reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_coreaon: prm@628 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x628 0xd8>;
+ #power-domain-cells = <0>;
};
prm_core: prm@700 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x700 0x100>;
#reset-cells = <1>;
+ #power-domain-cells = <0>;
};
prm_iva: prm@f00 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0xf00 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_cam: prm@1000 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1000 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_dss: prm@1100 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1100 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_gpu: prm@1200 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1200 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_l3init: prm@1300 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1300 0x100>;
+ #reset-cells = <1>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_l4per: prm@1400 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1400 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_custefuse: prm@1600 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1600 0x100>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_wkupaon: prm@1724 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1724 0x100>;
+ #power-domain-cells = <0>;
};
prm_dsp2: prm@1b00 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x1b00 0x40>;
#reset-cells = <1>;
+ #power-domain-cells = <0>;
};
prm_eve1: prm@1b40 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x1b40 0x40>;
+ #power-domain-cells = <0>;
};
prm_eve2: prm@1b80 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x1b80 0x40>;
+ #power-domain-cells = <0>;
};
prm_eve3: prm@1bc0 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x1bc0 0x40>;
+ #power-domain-cells = <0>;
};
prm_eve4: prm@1c00 {
compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
reg = <0x1c00 0x60>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_rtc: prm@1c60 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1c60 0x20>;
+ #power-domain-cells = <0>;
+ };
+
+ prm_vpe: prm@1c80 {
+ compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+ reg = <0x1c80 0x80>;
+ #power-domain-cells = <0>;
};
};
menu "TI OMAP/AM/DM/DRA Family"
depends on ARCH_MULTI_V6 || ARCH_MULTI_V7
+ config OMAP_HWMOD
+ bool
+
config ARCH_OMAP2
bool "TI OMAP2"
depends on ARCH_MULTI_V6
select ARCH_OMAP2PLUS
select CPU_V6
+ select OMAP_HWMOD
select SOC_HAS_OMAP2_SDRC
config ARCH_OMAP3
depends on ARCH_MULTI_V7
select ARCH_OMAP2PLUS
select ARM_CPU_SUSPEND if PM
+ select OMAP_HWMOD
select OMAP_INTERCONNECT
select PM_OPP if PM
select PM if CPU_IDLE
select ARM_GIC
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
+ select OMAP_HWMOD
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PL310_ERRATA_588369 if CACHE_L2X0
select HAVE_ARM_SCU if SMP
select HAVE_ARM_ARCH_TIMER
select ARM_ERRATA_798181 if SMP
+ select OMAP_HWMOD
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
select HAVE_ARM_ARCH_TIMER
select IRQ_CROSSBAR
select ARM_ERRATA_798181 if SMP
+ select OMAP_HWMOD
select OMAP_INTERCONNECT
select OMAP_INTERCONNECT_BARRIER
select PM_OPP if PM
config ARCH_OMAP2PLUS
bool
select ARCH_HAS_BANDGAP
- select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_RESET_CONTROLLER
select ARCH_OMAP
select CLKSRC_MMIO
projects / linux.git / commitdiff